binutils-gdb/gdb/mem-break.c

132 lines
4.2 KiB
C
Raw Normal View History

/* Simulate breakpoints by patching locations in the target system, for GDB.
Copyright (C) 1990-2015 Free Software Foundation, Inc.
Contributed by Cygnus Support. Written by John Gilmore.
1999-07-07 22:19:36 +02:00
This file is part of GDB.
1999-07-07 22:19:36 +02:00
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
1999-07-07 22:19:36 +02:00
(at your option) any later version.
1999-07-07 22:19:36 +02:00
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
1999-07-07 22:19:36 +02:00
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "symtab.h"
#include "breakpoint.h"
#include "inferior.h"
#include "target.h"
gdb/ * breakpoint.c (deprecated_read_memory_nobpt): Update to use shadow_len. (insert_bp_location, reattach_breakpoints, remove_breakpoint) (delete_breakpoint): Update calls to changed methods. (deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint) (single_step_breakpoints, insert_single_step_breakpoint) (remove_single_step_breakpoints): New. * breakpoint.h (struct bp_target_info): New. (struct bp_location): Replace shadow_contents with target_info and overlay_target_info. (deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint) (insert_single_step_breakpoint, remove_single_step_breakpoints): New prototypes. * gdbarch.sh: Forward declare struct bp_target_info in gdbarch.h. (memory_insert_breakpoint, memory_remove_breakpoint): Update second argument. * mem-break.c (default_memory_insert_breakpoint): Update. Set placed_address, placed_size, and shadow_len. (default_memory_remove_breakpoint): Update. Don't use BREAKPOINT_FROM_PC. (memory_insert_breakpoint, memory_remove_breakpoint): Update. * target.c (update_current_target): Update prototypes for changed functions. (debug_to_insert_breakpoint, debug_to_remove_breakpoint) (debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Update. * target.h: Forward declare struct bp_target_info. (struct target_ops): Use a bp_target_info argument for to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint, and to_remove_hw_breakpoint. (target_insert_breakpoint, target_remove_breakpoint) (target_insert_hw_breakpoint, target_remove_hw_breakpoint) (memory_insert_breakpoint, memory_remove_breakpoint) (default_memory_insert_breakpoint, default_memory_remove_breakpoint): Update. * config/i386/nm-i386.h: Forward declare struct bp_target_info. (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): Update. (target_insert_hw_breakpoint, target_remove_hw_breakpoint): Likewise. * gdbarch.c, gdbarch.h: Regenerated. * alpha-tdep.c (alpha_software_single_step): Use insert_single_step_breakpoint and remove_single_step_breakpoints. Remove unused statics. * arm-tdep.c (arm_software_single_step): Likewise. Add a note. * cris-tdep.c (cris_software_single_step): Likewise. * mips-tdep.c (mips_software_single_step): Likewise. * rs6000-tdep.c (rs6000_software_single_step): Likewise. * sparc-tdep.c (sparc_software_single_step): Likewise. * wince.c (struct thread_info_struct): Remove step_prev. (undoSStep): Use remove_single_step_breakpoints. (wince_software_single_step): Use insert_single_step_breakpoint. * corelow.c (ignore): Remove unneeded prototype. Update arguments. * exec.c (ignore): Likewise. * sol-thread.c (ignore): Likewise. * procfs.c (dbx_link_shadow_contents): Delete. (dbx_link_bpt): New. (procfs_mourn_inferior): Remove it if necessary. (remove_dbx_link_breakpoint): Use it. (insert_dbx_link_bpt_in_file): Set it. (procfs_init_inferior): Don't update dbx_link_bpt_addr. * rs6000-nat.c (exec_one_dummy_insn): Use deprecated_insert_raw_breakpoint and deprecated_remove_raw_breakpoint. * solib-irix.c (shadow_contents, breakpoint_addr): Delete. (base_breakpoint): New. (disable_break): Use it. (enable_break): Set it. * i386-nat.c (i386_insert_hw_breakpoint, i386_remove_hw_breakpoint): Update. * ia64-tdep.c (ia64_memory_insert_breakpoint) (ia64_memory_remove_breakpoint): Likewise. * m32r-tdep.c (m32r_memory_insert_breakpoint) (m32r_memory_remove_breakpoint): Likewise. * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint): Likewise. Remove unnecessary prototypes. Use placed_address and placed_size. Removed useless read from memory. * nto-procfs.c (procfs_insert_breakpoint) (procfs_remove_breakpoint, procfs_insert_hw_breakpoint) (procfs_remove_hw_breakpoint): Update. * ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise. * ocd.h (ocd_insert_breakpoint, ocd_remove_breakpoint): Likewise. * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise. * ppc-tdep.h (ppc_linux_memory_remove_breakpoint): Likewise. * remote-e7000.c (e7000_insert_breakpoint) (e7000_remove_breakpoint): Likewise. * remote-m32r-sdi.c (m32r_insert_breakpoint) (m32r_remove_breakpoint): Likewise. * remote-mips.c (mips_insert_breakpoint) (mips_remove_breakpoint): Likewise. * remote-rdp.c (remote_rdp_insert_breakpoint) (remote_rdp_remove_breakpoint): Likewise. (rdp_step): Use deprecated_insert_raw_breakpoint and deprecated_remove_raw_breakpoint. * remote-sds.c (sds_insert_breakpoint, sds_remove_breakpoint): Update. * remote-sim.c (gdbsim_insert_breakpoint, gdbsim_remove_breakpoint): Delete. (init_gdbsim_ops): Use memory_insert_breakpoint and memory_remove_breakpoint. * remote-st.c (st2000_insert_breakpoint) (st2000_remove_breakpoint): Update. Remove unused BREAKPOINT_FROM_PC. * remote.c (remote_insert_breakpoint, remote_remove_breakpoint): Update. Use placed_address and placed_size. (remote_insert_hw_breakpoint, remote_remove_hw_breakpoint): Likewise. gdb/doc/ * gdbint.texinfo (x86 Watchpoints, Target Conditionals): Update insert and remove breakpoint prototypes. (Watchpoints): Move description of target_insert_hw_breakpoint and target_remove_hw_breakpoint ... (Breakpoints): ... to here. Document target_insert_breakpoint and target_remove_breakpoint.
2006-04-18 21:20:08 +02:00
/* Insert a breakpoint on targets that don't have any better
breakpoint support. We read the contents of the target location
and stash it, then overwrite it with a breakpoint instruction.
BP_TGT->placed_address is the target location in the target
machine. BP_TGT->shadow_contents is some memory allocated for
saving the target contents. It is guaranteed by the caller to be
long enough to save BREAKPOINT_LEN bytes (this is accomplished via
BREAKPOINT_MAX). */
int
default_memory_insert_breakpoint (struct gdbarch *gdbarch,
struct bp_target_info *bp_tgt)
{
Avoid software breakpoint's instruction shadow inconsistency This change: commit b775012e845380ed4c7421a1b87caf7bfae39f5f Author: Luis Machado <luisgpm@br.ibm.com> Date: Fri Feb 24 15:10:59 2012 +0000 2012-02-24 Luis Machado <lgustavo@codesourcery.com> * remote.c (remote_supports_cond_breakpoints): New forward declaration. [...] changed the way breakpoints are inserted and removed such that `insert_bp_location' can now be called with the breakpoint being handled already in place, while previously the call was only ever made for breakpoints that have not been put in place. This in turn caused an issue for software breakpoints and targets for which a breakpoint's `placed_address' may not be the same as the original requested address. The issue is `insert_bp_location' overwrites the previously adjusted value in `placed_address' with the original address, that is only replaced back with the correct adjusted address later on when `gdbarch_breakpoint_from_pc' is called. Meanwhile there's a window where the value in `placed_address' does not correspond to data stored in `shadow_contents', leading to incorrect instruction bytes being supplied when `one_breakpoint_xfer_memory' is called to supply the instruction overlaid by the breakpoint. And this is exactly what happens on the MIPS target with software breakpoints placed in microMIPS code. In this case not only `placed_address' is not the original address because of the ISA bit, but `mips_breakpoint_from_pc' has to read the original instruction to determine which one of the two software breakpoint instruction encodings to choose as well. The 16-bit encoding is used to replace 16-bit instructions and similarly the 32-bit one is used with 32-bit instructions, to satisfy branch delay slot size requirements. The mismatch between `placed_address' and the address data in `shadow_contents' has been obtained from leads to the wrong encoding being used in some cases, which in the case of a 32-bit software breakpoint instruction replacing a 16-bit instruction causes corruption to the adjacent following instruction and leads the debug session astray if execution reaches there e.g. with a jump. To address this problem I made the change below, that adds a `reqstd_address' field to `struct bp_target_info' and leaves `placed_address' unchanged once it has been set. This ensures data in `shadow_contents' is always consistent with `placed_address'. This approach also has this good side effect that all the places that examine the breakpoint's address see a consistent value, either `reqstd_address' or `placed_address', as required. Currently some places see either the original or the adjusted address in `placed_address', depending on whether they have been called before `gdbarch_remote_breakpoint_from_pc' or afterwards. This is in particular true for subsequent calls to `gdbarch_remote_breakpoint_from_pc' itself, e.g. from `one_breakpoint_xfer_memory'. This is also important for places like `find_single_step_breakpoint' where a breakpoint's address is compared to the raw value of $pc. * breakpoint.h (bp_target_info): Add `reqstd_address' member, update comments. * breakpoint.c (one_breakpoint_xfer_memory): Use `reqstd_address' for the breakpoint's address. Don't preinitialize `placed_size'. (insert_bp_location): Set `reqstd_address' rather than `placed_address'. (bp_target_info_copy_insertion_state): Also copy `placed_address'. (bkpt_insert_location): Use `reqstd_address' for the breakpoint's address. (bkpt_remove_location): Likewise. (deprecated_insert_raw_breakpoint): Likewise. (deprecated_remove_raw_breakpoint): Likewise. (find_single_step_breakpoint): Likewise. * mem-break.c (default_memory_insert_breakpoint): Use `reqstd_address' for the breakpoint's address. Don't set `placed_address' or `placed_size' if breakpoint contents couldn't have been determined. * remote.c (remote_insert_breakpoint): Use `reqstd_address' for the breakpoint's address. (remote_insert_hw_breakpoint): Likewise. Don't set `placed_address' or `placed_size' if breakpoint couldn't have been set. * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Use `reqstd_address' for the breakpoint's address. * arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Likewise. * ia64-tdep.c (ia64_memory_insert_breakpoint): Likewise. * m32r-tdep.c (m32r_memory_insert_breakpoint): Likewise. * microblaze-linux-tdep.c (microblaze_linux_memory_remove_breakpoint): Likewise. * monitor.c (monitor_insert_breakpoint): Likewise. * nto-procfs.c (procfs_insert_breakpoint): Likewise. (procfs_insert_hw_breakpoint): Likewise. * ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Likewise. * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise. * remote-m32r-sdi.c (m32r_insert_breakpoint): Likewise. * remote-mips.c (mips_insert_breakpoint): Likewise. * x86-nat.c (x86_insert_hw_breakpoint): Likewise.
2014-10-03 13:44:58 +02:00
CORE_ADDR addr = bp_tgt->reqstd_address;
const unsigned char *bp;
Problem after hitting breakpoint on Windows (with GDBserver) When debugging on Windows with GDBserver, the debugger starts failing after hitting a breakpoint. For instance: (gdb) b foo Breakpoint 1 at 0x40177e: file foo.adb, line 5. (gdb) cont Continuing. Breakpoint 1, foo () at foo.adb:5 5 Put_Line ("Hello World."); -- STOP (gdb) n Program received signal SIGSEGV, Segmentation fault. 0x00401782 in foo () at foo.adb:5 5 Put_Line ("Hello World."); -- STOP There are two issues: 1. While trying to re-insert a breakpoint that is still inserted in memory, insert_bp_location wipes out the breakpoint location's shadow_contents. As a consequence, we cannot restore the proper instruction when removing the breakpoint anymore. That's why the inferior's behavior changes when trying to resume after the breakpoint was hit. 2. mem-break.c:default_memory_insert_breakpoint passes a breakpoint location's shadow_contents as the buffer for a memory read. This reveals a limitation of the various memory-read target functions. This patch documents this limitation and adjust the two calls that seem to hit that limitation. gdb/ChangeLog: * breakpoint.c (breakpoint_xfer_memory): Add assertion. Update function description. (insert_bp_location): Do not wipe bl->target_info out. * mem-break.c: #include "gdb_string.h". (default_memory_insert_breakpoint): Do not call target_read_memory with a pointer to the breakpoint's shadow_contents buffer. Use a local buffer instead. * m32r-tdep.c (m32r_memory_insert_breakpoint): Ditto.
2012-03-15 19:33:45 +01:00
gdb_byte *readbuf;
Avoid software breakpoint's instruction shadow inconsistency This change: commit b775012e845380ed4c7421a1b87caf7bfae39f5f Author: Luis Machado <luisgpm@br.ibm.com> Date: Fri Feb 24 15:10:59 2012 +0000 2012-02-24 Luis Machado <lgustavo@codesourcery.com> * remote.c (remote_supports_cond_breakpoints): New forward declaration. [...] changed the way breakpoints are inserted and removed such that `insert_bp_location' can now be called with the breakpoint being handled already in place, while previously the call was only ever made for breakpoints that have not been put in place. This in turn caused an issue for software breakpoints and targets for which a breakpoint's `placed_address' may not be the same as the original requested address. The issue is `insert_bp_location' overwrites the previously adjusted value in `placed_address' with the original address, that is only replaced back with the correct adjusted address later on when `gdbarch_breakpoint_from_pc' is called. Meanwhile there's a window where the value in `placed_address' does not correspond to data stored in `shadow_contents', leading to incorrect instruction bytes being supplied when `one_breakpoint_xfer_memory' is called to supply the instruction overlaid by the breakpoint. And this is exactly what happens on the MIPS target with software breakpoints placed in microMIPS code. In this case not only `placed_address' is not the original address because of the ISA bit, but `mips_breakpoint_from_pc' has to read the original instruction to determine which one of the two software breakpoint instruction encodings to choose as well. The 16-bit encoding is used to replace 16-bit instructions and similarly the 32-bit one is used with 32-bit instructions, to satisfy branch delay slot size requirements. The mismatch between `placed_address' and the address data in `shadow_contents' has been obtained from leads to the wrong encoding being used in some cases, which in the case of a 32-bit software breakpoint instruction replacing a 16-bit instruction causes corruption to the adjacent following instruction and leads the debug session astray if execution reaches there e.g. with a jump. To address this problem I made the change below, that adds a `reqstd_address' field to `struct bp_target_info' and leaves `placed_address' unchanged once it has been set. This ensures data in `shadow_contents' is always consistent with `placed_address'. This approach also has this good side effect that all the places that examine the breakpoint's address see a consistent value, either `reqstd_address' or `placed_address', as required. Currently some places see either the original or the adjusted address in `placed_address', depending on whether they have been called before `gdbarch_remote_breakpoint_from_pc' or afterwards. This is in particular true for subsequent calls to `gdbarch_remote_breakpoint_from_pc' itself, e.g. from `one_breakpoint_xfer_memory'. This is also important for places like `find_single_step_breakpoint' where a breakpoint's address is compared to the raw value of $pc. * breakpoint.h (bp_target_info): Add `reqstd_address' member, update comments. * breakpoint.c (one_breakpoint_xfer_memory): Use `reqstd_address' for the breakpoint's address. Don't preinitialize `placed_size'. (insert_bp_location): Set `reqstd_address' rather than `placed_address'. (bp_target_info_copy_insertion_state): Also copy `placed_address'. (bkpt_insert_location): Use `reqstd_address' for the breakpoint's address. (bkpt_remove_location): Likewise. (deprecated_insert_raw_breakpoint): Likewise. (deprecated_remove_raw_breakpoint): Likewise. (find_single_step_breakpoint): Likewise. * mem-break.c (default_memory_insert_breakpoint): Use `reqstd_address' for the breakpoint's address. Don't set `placed_address' or `placed_size' if breakpoint contents couldn't have been determined. * remote.c (remote_insert_breakpoint): Use `reqstd_address' for the breakpoint's address. (remote_insert_hw_breakpoint): Likewise. Don't set `placed_address' or `placed_size' if breakpoint couldn't have been set. * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Use `reqstd_address' for the breakpoint's address. * arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Likewise. * ia64-tdep.c (ia64_memory_insert_breakpoint): Likewise. * m32r-tdep.c (m32r_memory_insert_breakpoint): Likewise. * microblaze-linux-tdep.c (microblaze_linux_memory_remove_breakpoint): Likewise. * monitor.c (monitor_insert_breakpoint): Likewise. * nto-procfs.c (procfs_insert_breakpoint): Likewise. (procfs_insert_hw_breakpoint): Likewise. * ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Likewise. * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise. * remote-m32r-sdi.c (m32r_insert_breakpoint): Likewise. * remote-mips.c (mips_insert_breakpoint): Likewise. * x86-nat.c (x86_insert_hw_breakpoint): Likewise.
2014-10-03 13:44:58 +02:00
int bplen;
int val;
/* Determine appropriate breakpoint contents and size for this address. */
Avoid software breakpoint's instruction shadow inconsistency This change: commit b775012e845380ed4c7421a1b87caf7bfae39f5f Author: Luis Machado <luisgpm@br.ibm.com> Date: Fri Feb 24 15:10:59 2012 +0000 2012-02-24 Luis Machado <lgustavo@codesourcery.com> * remote.c (remote_supports_cond_breakpoints): New forward declaration. [...] changed the way breakpoints are inserted and removed such that `insert_bp_location' can now be called with the breakpoint being handled already in place, while previously the call was only ever made for breakpoints that have not been put in place. This in turn caused an issue for software breakpoints and targets for which a breakpoint's `placed_address' may not be the same as the original requested address. The issue is `insert_bp_location' overwrites the previously adjusted value in `placed_address' with the original address, that is only replaced back with the correct adjusted address later on when `gdbarch_breakpoint_from_pc' is called. Meanwhile there's a window where the value in `placed_address' does not correspond to data stored in `shadow_contents', leading to incorrect instruction bytes being supplied when `one_breakpoint_xfer_memory' is called to supply the instruction overlaid by the breakpoint. And this is exactly what happens on the MIPS target with software breakpoints placed in microMIPS code. In this case not only `placed_address' is not the original address because of the ISA bit, but `mips_breakpoint_from_pc' has to read the original instruction to determine which one of the two software breakpoint instruction encodings to choose as well. The 16-bit encoding is used to replace 16-bit instructions and similarly the 32-bit one is used with 32-bit instructions, to satisfy branch delay slot size requirements. The mismatch between `placed_address' and the address data in `shadow_contents' has been obtained from leads to the wrong encoding being used in some cases, which in the case of a 32-bit software breakpoint instruction replacing a 16-bit instruction causes corruption to the adjacent following instruction and leads the debug session astray if execution reaches there e.g. with a jump. To address this problem I made the change below, that adds a `reqstd_address' field to `struct bp_target_info' and leaves `placed_address' unchanged once it has been set. This ensures data in `shadow_contents' is always consistent with `placed_address'. This approach also has this good side effect that all the places that examine the breakpoint's address see a consistent value, either `reqstd_address' or `placed_address', as required. Currently some places see either the original or the adjusted address in `placed_address', depending on whether they have been called before `gdbarch_remote_breakpoint_from_pc' or afterwards. This is in particular true for subsequent calls to `gdbarch_remote_breakpoint_from_pc' itself, e.g. from `one_breakpoint_xfer_memory'. This is also important for places like `find_single_step_breakpoint' where a breakpoint's address is compared to the raw value of $pc. * breakpoint.h (bp_target_info): Add `reqstd_address' member, update comments. * breakpoint.c (one_breakpoint_xfer_memory): Use `reqstd_address' for the breakpoint's address. Don't preinitialize `placed_size'. (insert_bp_location): Set `reqstd_address' rather than `placed_address'. (bp_target_info_copy_insertion_state): Also copy `placed_address'. (bkpt_insert_location): Use `reqstd_address' for the breakpoint's address. (bkpt_remove_location): Likewise. (deprecated_insert_raw_breakpoint): Likewise. (deprecated_remove_raw_breakpoint): Likewise. (find_single_step_breakpoint): Likewise. * mem-break.c (default_memory_insert_breakpoint): Use `reqstd_address' for the breakpoint's address. Don't set `placed_address' or `placed_size' if breakpoint contents couldn't have been determined. * remote.c (remote_insert_breakpoint): Use `reqstd_address' for the breakpoint's address. (remote_insert_hw_breakpoint): Likewise. Don't set `placed_address' or `placed_size' if breakpoint couldn't have been set. * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Use `reqstd_address' for the breakpoint's address. * arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Likewise. * ia64-tdep.c (ia64_memory_insert_breakpoint): Likewise. * m32r-tdep.c (m32r_memory_insert_breakpoint): Likewise. * microblaze-linux-tdep.c (microblaze_linux_memory_remove_breakpoint): Likewise. * monitor.c (monitor_insert_breakpoint): Likewise. * nto-procfs.c (procfs_insert_breakpoint): Likewise. (procfs_insert_hw_breakpoint): Likewise. * ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Likewise. * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise. * remote-m32r-sdi.c (m32r_insert_breakpoint): Likewise. * remote-mips.c (mips_insert_breakpoint): Likewise. * x86-nat.c (x86_insert_hw_breakpoint): Likewise.
2014-10-03 13:44:58 +02:00
bp = gdbarch_breakpoint_from_pc (gdbarch, &addr, &bplen);
if (bp == NULL)
2005-02-10 Andrew Cagney <cagney@gnu.org> Mark up all error and warning messages. * ada-lang.c, amd64-tdep.c, arch-utils.c, breakpoint.c: Update. * bsd-kvm.c, bsd-uthread.c, coff-solib.h, coffread.c: Update. * core-aout.c, core-regset.c, corefile.c, corelow.c: Update. * cp-abi.c, cp-support.c, cp-valprint.c, cris-tdep.c: Update. * dbxread.c, demangle.c, doublest.c, dsrec.c: Update. * dve3900-rom.c, dwarf2expr.c, dwarf2loc.c: Update. * dwarf2read.c, dwarfread.c, elfread.c, eval.c: Update. * event-top.c, exec.c, expprint.c, f-lang.c: Update. * f-typeprint.c, f-valprint.c, fbsd-nat.c, findvar.c: Update. * frame.c, frv-linux-tdep.c, gcore.c, gdbtypes.c: Update. * gnu-nat.c, gnu-v2-abi.c, gnu-v3-abi.c, go32-nat.c: Update. * hpacc-abi.c, hppa-hpux-nat.c, hppa-hpux-tdep.c: Update. * hppa-linux-nat.c, hppa-linux-tdep.c, hppa-tdep.c: Update. * hpread.c, hpux-thread.c, i386-linux-nat.c: Update. * i386-linux-tdep.c, i386-tdep.c, i386bsd-nat.c: Update. * i386gnu-nat.c, i387-tdep.c, ia64-linux-nat.c: Update. * ia64-tdep.c, inf-child.c, inf-ptrace.c, inf-ttrace.c: Update. * infcall.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update. * inftarg.c, interps.c, irix5-nat.c, jv-lang.c: Update. * kod-cisco.c, kod.c, language.c, libunwind-frame.c: Update. * linespec.c, linux-nat.c, linux-thread-db.c, m2-lang.c: Update. * m32r-rom.c, m68hc11-tdep.c, m68k-tdep.c: Update. * m68klinux-nat.c, macrocmd.c, macroexp.c, main.c: Update. * maint.c, mdebugread.c, mem-break.c, memattr.c: Update. * mips-linux-tdep.c, mips-tdep.c, mipsread.c, monitor.c: Update. * nlmread.c, nto-procfs.c, objc-lang.c, objfiles.c: Update. * observer.c, ocd.c, p-lang.c, p-typeprint.c: Update. * p-valprint.c, pa64solib.c, parse.c, ppc-linux-tdep.c: Update. * ppcnbsd-tdep.c, printcmd.c, procfs.c, remote-e7000.c: Update. * remote-fileio.c, remote-m32r-sdi.c, remote-rdi.c: Update. * remote-rdp.c, remote-sim.c, remote-st.c: Update. * remote-utils.c, remote-utils.h, remote.c: Update. * rom68k-rom.c, rs6000-nat.c, s390-tdep.c, scm-lang.c: Update. * ser-e7kpc.c, ser-tcp.c, ser-unix.c, sh-tdep.c: Update. * sh3-rom.c, shnbsd-tdep.c, sol-thread.c, solib-aix5.c: Update. * solib-frv.c, solib-irix.c, solib-osf.c, solib-pa64.c: Update. * solib-som.c, solib-sunos.c, solib-svr4.c, solib.c: Update. * somread.c, somsolib.c, source.c, stabsread.c: Update. * stack.c, std-regs.c, symfile-mem.c, symfile.c: Update. * symmisc.c, symtab.c, target.c, thread.c, top.c: Update. * tracepoint.c, trad-frame.c, typeprint.c, utils.c: Update. * uw-thread.c, valarith.c, valops.c, valprint.c: Update. * value.c, varobj.c, version.in, win32-nat.c, wince.c: Update. * xcoffread.c, xcoffsolib.c, cli/cli-cmds.c: Update. * cli/cli-decode.c, cli/cli-dump.c, cli/cli-logging.c: Update. * cli/cli-script.c, cli/cli-setshow.c, mi/mi-cmd-break.c: Update. * mi/mi-cmd-disas.c, mi/mi-cmd-env.c, mi/mi-cmd-file.c: Update. * mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-getopt.c: Update. * mi/mi-symbol-cmds.c, tui/tui-layout.c, tui/tui-stack.c: Update. * tui/tui-win.c: Update.
2005-02-11 05:06:14 +01:00
error (_("Software breakpoints not implemented for this target."));
Avoid software breakpoint's instruction shadow inconsistency This change: commit b775012e845380ed4c7421a1b87caf7bfae39f5f Author: Luis Machado <luisgpm@br.ibm.com> Date: Fri Feb 24 15:10:59 2012 +0000 2012-02-24 Luis Machado <lgustavo@codesourcery.com> * remote.c (remote_supports_cond_breakpoints): New forward declaration. [...] changed the way breakpoints are inserted and removed such that `insert_bp_location' can now be called with the breakpoint being handled already in place, while previously the call was only ever made for breakpoints that have not been put in place. This in turn caused an issue for software breakpoints and targets for which a breakpoint's `placed_address' may not be the same as the original requested address. The issue is `insert_bp_location' overwrites the previously adjusted value in `placed_address' with the original address, that is only replaced back with the correct adjusted address later on when `gdbarch_breakpoint_from_pc' is called. Meanwhile there's a window where the value in `placed_address' does not correspond to data stored in `shadow_contents', leading to incorrect instruction bytes being supplied when `one_breakpoint_xfer_memory' is called to supply the instruction overlaid by the breakpoint. And this is exactly what happens on the MIPS target with software breakpoints placed in microMIPS code. In this case not only `placed_address' is not the original address because of the ISA bit, but `mips_breakpoint_from_pc' has to read the original instruction to determine which one of the two software breakpoint instruction encodings to choose as well. The 16-bit encoding is used to replace 16-bit instructions and similarly the 32-bit one is used with 32-bit instructions, to satisfy branch delay slot size requirements. The mismatch between `placed_address' and the address data in `shadow_contents' has been obtained from leads to the wrong encoding being used in some cases, which in the case of a 32-bit software breakpoint instruction replacing a 16-bit instruction causes corruption to the adjacent following instruction and leads the debug session astray if execution reaches there e.g. with a jump. To address this problem I made the change below, that adds a `reqstd_address' field to `struct bp_target_info' and leaves `placed_address' unchanged once it has been set. This ensures data in `shadow_contents' is always consistent with `placed_address'. This approach also has this good side effect that all the places that examine the breakpoint's address see a consistent value, either `reqstd_address' or `placed_address', as required. Currently some places see either the original or the adjusted address in `placed_address', depending on whether they have been called before `gdbarch_remote_breakpoint_from_pc' or afterwards. This is in particular true for subsequent calls to `gdbarch_remote_breakpoint_from_pc' itself, e.g. from `one_breakpoint_xfer_memory'. This is also important for places like `find_single_step_breakpoint' where a breakpoint's address is compared to the raw value of $pc. * breakpoint.h (bp_target_info): Add `reqstd_address' member, update comments. * breakpoint.c (one_breakpoint_xfer_memory): Use `reqstd_address' for the breakpoint's address. Don't preinitialize `placed_size'. (insert_bp_location): Set `reqstd_address' rather than `placed_address'. (bp_target_info_copy_insertion_state): Also copy `placed_address'. (bkpt_insert_location): Use `reqstd_address' for the breakpoint's address. (bkpt_remove_location): Likewise. (deprecated_insert_raw_breakpoint): Likewise. (deprecated_remove_raw_breakpoint): Likewise. (find_single_step_breakpoint): Likewise. * mem-break.c (default_memory_insert_breakpoint): Use `reqstd_address' for the breakpoint's address. Don't set `placed_address' or `placed_size' if breakpoint contents couldn't have been determined. * remote.c (remote_insert_breakpoint): Use `reqstd_address' for the breakpoint's address. (remote_insert_hw_breakpoint): Likewise. Don't set `placed_address' or `placed_size' if breakpoint couldn't have been set. * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Use `reqstd_address' for the breakpoint's address. * arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Likewise. * ia64-tdep.c (ia64_memory_insert_breakpoint): Likewise. * m32r-tdep.c (m32r_memory_insert_breakpoint): Likewise. * microblaze-linux-tdep.c (microblaze_linux_memory_remove_breakpoint): Likewise. * monitor.c (monitor_insert_breakpoint): Likewise. * nto-procfs.c (procfs_insert_breakpoint): Likewise. (procfs_insert_hw_breakpoint): Likewise. * ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Likewise. * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise. * remote-m32r-sdi.c (m32r_insert_breakpoint): Likewise. * remote-mips.c (mips_insert_breakpoint): Likewise. * x86-nat.c (x86_insert_hw_breakpoint): Likewise.
2014-10-03 13:44:58 +02:00
bp_tgt->placed_address = addr;
bp_tgt->placed_size = bplen;
Problem after hitting breakpoint on Windows (with GDBserver) When debugging on Windows with GDBserver, the debugger starts failing after hitting a breakpoint. For instance: (gdb) b foo Breakpoint 1 at 0x40177e: file foo.adb, line 5. (gdb) cont Continuing. Breakpoint 1, foo () at foo.adb:5 5 Put_Line ("Hello World."); -- STOP (gdb) n Program received signal SIGSEGV, Segmentation fault. 0x00401782 in foo () at foo.adb:5 5 Put_Line ("Hello World."); -- STOP There are two issues: 1. While trying to re-insert a breakpoint that is still inserted in memory, insert_bp_location wipes out the breakpoint location's shadow_contents. As a consequence, we cannot restore the proper instruction when removing the breakpoint anymore. That's why the inferior's behavior changes when trying to resume after the breakpoint was hit. 2. mem-break.c:default_memory_insert_breakpoint passes a breakpoint location's shadow_contents as the buffer for a memory read. This reveals a limitation of the various memory-read target functions. This patch documents this limitation and adjust the two calls that seem to hit that limitation. gdb/ChangeLog: * breakpoint.c (breakpoint_xfer_memory): Add assertion. Update function description. (insert_bp_location): Do not wipe bl->target_info out. * mem-break.c: #include "gdb_string.h". (default_memory_insert_breakpoint): Do not call target_read_memory with a pointer to the breakpoint's shadow_contents buffer. Use a local buffer instead. * m32r-tdep.c (m32r_memory_insert_breakpoint): Ditto.
2012-03-15 19:33:45 +01:00
/* Save the memory contents in the shadow_contents buffer and then
write the breakpoint instruction. */
Avoid software breakpoint's instruction shadow inconsistency This change: commit b775012e845380ed4c7421a1b87caf7bfae39f5f Author: Luis Machado <luisgpm@br.ibm.com> Date: Fri Feb 24 15:10:59 2012 +0000 2012-02-24 Luis Machado <lgustavo@codesourcery.com> * remote.c (remote_supports_cond_breakpoints): New forward declaration. [...] changed the way breakpoints are inserted and removed such that `insert_bp_location' can now be called with the breakpoint being handled already in place, while previously the call was only ever made for breakpoints that have not been put in place. This in turn caused an issue for software breakpoints and targets for which a breakpoint's `placed_address' may not be the same as the original requested address. The issue is `insert_bp_location' overwrites the previously adjusted value in `placed_address' with the original address, that is only replaced back with the correct adjusted address later on when `gdbarch_breakpoint_from_pc' is called. Meanwhile there's a window where the value in `placed_address' does not correspond to data stored in `shadow_contents', leading to incorrect instruction bytes being supplied when `one_breakpoint_xfer_memory' is called to supply the instruction overlaid by the breakpoint. And this is exactly what happens on the MIPS target with software breakpoints placed in microMIPS code. In this case not only `placed_address' is not the original address because of the ISA bit, but `mips_breakpoint_from_pc' has to read the original instruction to determine which one of the two software breakpoint instruction encodings to choose as well. The 16-bit encoding is used to replace 16-bit instructions and similarly the 32-bit one is used with 32-bit instructions, to satisfy branch delay slot size requirements. The mismatch between `placed_address' and the address data in `shadow_contents' has been obtained from leads to the wrong encoding being used in some cases, which in the case of a 32-bit software breakpoint instruction replacing a 16-bit instruction causes corruption to the adjacent following instruction and leads the debug session astray if execution reaches there e.g. with a jump. To address this problem I made the change below, that adds a `reqstd_address' field to `struct bp_target_info' and leaves `placed_address' unchanged once it has been set. This ensures data in `shadow_contents' is always consistent with `placed_address'. This approach also has this good side effect that all the places that examine the breakpoint's address see a consistent value, either `reqstd_address' or `placed_address', as required. Currently some places see either the original or the adjusted address in `placed_address', depending on whether they have been called before `gdbarch_remote_breakpoint_from_pc' or afterwards. This is in particular true for subsequent calls to `gdbarch_remote_breakpoint_from_pc' itself, e.g. from `one_breakpoint_xfer_memory'. This is also important for places like `find_single_step_breakpoint' where a breakpoint's address is compared to the raw value of $pc. * breakpoint.h (bp_target_info): Add `reqstd_address' member, update comments. * breakpoint.c (one_breakpoint_xfer_memory): Use `reqstd_address' for the breakpoint's address. Don't preinitialize `placed_size'. (insert_bp_location): Set `reqstd_address' rather than `placed_address'. (bp_target_info_copy_insertion_state): Also copy `placed_address'. (bkpt_insert_location): Use `reqstd_address' for the breakpoint's address. (bkpt_remove_location): Likewise. (deprecated_insert_raw_breakpoint): Likewise. (deprecated_remove_raw_breakpoint): Likewise. (find_single_step_breakpoint): Likewise. * mem-break.c (default_memory_insert_breakpoint): Use `reqstd_address' for the breakpoint's address. Don't set `placed_address' or `placed_size' if breakpoint contents couldn't have been determined. * remote.c (remote_insert_breakpoint): Use `reqstd_address' for the breakpoint's address. (remote_insert_hw_breakpoint): Likewise. Don't set `placed_address' or `placed_size' if breakpoint couldn't have been set. * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Use `reqstd_address' for the breakpoint's address. * arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Likewise. * ia64-tdep.c (ia64_memory_insert_breakpoint): Likewise. * m32r-tdep.c (m32r_memory_insert_breakpoint): Likewise. * microblaze-linux-tdep.c (microblaze_linux_memory_remove_breakpoint): Likewise. * monitor.c (monitor_insert_breakpoint): Likewise. * nto-procfs.c (procfs_insert_breakpoint): Likewise. (procfs_insert_hw_breakpoint): Likewise. * ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Likewise. * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise. * remote-m32r-sdi.c (m32r_insert_breakpoint): Likewise. * remote-mips.c (mips_insert_breakpoint): Likewise. * x86-nat.c (x86_insert_hw_breakpoint): Likewise.
2014-10-03 13:44:58 +02:00
readbuf = alloca (bplen);
val = target_read_memory (addr, readbuf, bplen);
if (val == 0)
Problem after hitting breakpoint on Windows (with GDBserver) When debugging on Windows with GDBserver, the debugger starts failing after hitting a breakpoint. For instance: (gdb) b foo Breakpoint 1 at 0x40177e: file foo.adb, line 5. (gdb) cont Continuing. Breakpoint 1, foo () at foo.adb:5 5 Put_Line ("Hello World."); -- STOP (gdb) n Program received signal SIGSEGV, Segmentation fault. 0x00401782 in foo () at foo.adb:5 5 Put_Line ("Hello World."); -- STOP There are two issues: 1. While trying to re-insert a breakpoint that is still inserted in memory, insert_bp_location wipes out the breakpoint location's shadow_contents. As a consequence, we cannot restore the proper instruction when removing the breakpoint anymore. That's why the inferior's behavior changes when trying to resume after the breakpoint was hit. 2. mem-break.c:default_memory_insert_breakpoint passes a breakpoint location's shadow_contents as the buffer for a memory read. This reveals a limitation of the various memory-read target functions. This patch documents this limitation and adjust the two calls that seem to hit that limitation. gdb/ChangeLog: * breakpoint.c (breakpoint_xfer_memory): Add assertion. Update function description. (insert_bp_location): Do not wipe bl->target_info out. * mem-break.c: #include "gdb_string.h". (default_memory_insert_breakpoint): Do not call target_read_memory with a pointer to the breakpoint's shadow_contents buffer. Use a local buffer instead. * m32r-tdep.c (m32r_memory_insert_breakpoint): Ditto.
2012-03-15 19:33:45 +01:00
{
PR gdb/18002: Fix reinsert of a permanent breakpoints When we find out that a breakpoint is set on top of a program breakpoint, we mark it as "permanent". E.g.,: ... if (bp_loc_is_permanent (loc)) { loc->inserted = 1; loc->permanent = 1; } ... Note we didn't fill in the breakpoint's shadow (shadow_len remains 0). In case the target claims support for evaluating breakpoint conditions, GDB sometimes reinserts breakpoints that are already inserted (to update the conditions on the target side). Since GDB doesn't know whether the target supports evaluating conditions _of_ software breakpoints (vs hardware breakpoints, etc.) until it actually tries it, if the target doesn't actually support z0 breakpoints, GDB ends up reinserting a GDB-managed software/memory breakpoint (mem-break.c). And that is the case that is buggy: breakpoints that are marked inserted contribute their shadows (if any) to the memory returned by target_read_memory, to mask out breakpoints. Permanent breakpoints are always marked as inserted. So if the permanent breakpoint doesn't have a shadow yet in its shadow buffer, but we set shadow_len before calling target_read_memory, then the still clear shadow_contents buffer will be used by the breakpoint masking code... And then from there on, the permanent breakpoint has a broken shadow buffer, and thus any memory read out of that address will read bogus code, and many random bad things fall out from that. The fix is just to set shadow_len at the same time shadow_contents is set, not one before and another after... Fixes all gdb.base/bp-permanent.exp FAILs on PPC64 GNU/Linux gdbserver and probably any other gdbserver port that doesn't do z0 breakpoints. gdb/ChangeLog: 2015-03-05 Pedro Alves <palves@redhat.com> PR gdb/18002 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len after reading the breakpoint's shadow memory.
2015-03-06 00:39:45 +01:00
/* These must be set together, either before or after the shadow
read, so that if we're "reinserting" a breakpoint that
doesn't have a shadow yet, the breakpoint masking code inside
target_read_memory doesn't mask out this breakpoint using an
unfilled shadow buffer. The core may be trying to reinsert a
permanent breakpoint, for targets that support breakpoint
conditions/commands on the target side for some types of
breakpoints, such as target remote. */
bp_tgt->shadow_len = bplen;
Avoid software breakpoint's instruction shadow inconsistency This change: commit b775012e845380ed4c7421a1b87caf7bfae39f5f Author: Luis Machado <luisgpm@br.ibm.com> Date: Fri Feb 24 15:10:59 2012 +0000 2012-02-24 Luis Machado <lgustavo@codesourcery.com> * remote.c (remote_supports_cond_breakpoints): New forward declaration. [...] changed the way breakpoints are inserted and removed such that `insert_bp_location' can now be called with the breakpoint being handled already in place, while previously the call was only ever made for breakpoints that have not been put in place. This in turn caused an issue for software breakpoints and targets for which a breakpoint's `placed_address' may not be the same as the original requested address. The issue is `insert_bp_location' overwrites the previously adjusted value in `placed_address' with the original address, that is only replaced back with the correct adjusted address later on when `gdbarch_breakpoint_from_pc' is called. Meanwhile there's a window where the value in `placed_address' does not correspond to data stored in `shadow_contents', leading to incorrect instruction bytes being supplied when `one_breakpoint_xfer_memory' is called to supply the instruction overlaid by the breakpoint. And this is exactly what happens on the MIPS target with software breakpoints placed in microMIPS code. In this case not only `placed_address' is not the original address because of the ISA bit, but `mips_breakpoint_from_pc' has to read the original instruction to determine which one of the two software breakpoint instruction encodings to choose as well. The 16-bit encoding is used to replace 16-bit instructions and similarly the 32-bit one is used with 32-bit instructions, to satisfy branch delay slot size requirements. The mismatch between `placed_address' and the address data in `shadow_contents' has been obtained from leads to the wrong encoding being used in some cases, which in the case of a 32-bit software breakpoint instruction replacing a 16-bit instruction causes corruption to the adjacent following instruction and leads the debug session astray if execution reaches there e.g. with a jump. To address this problem I made the change below, that adds a `reqstd_address' field to `struct bp_target_info' and leaves `placed_address' unchanged once it has been set. This ensures data in `shadow_contents' is always consistent with `placed_address'. This approach also has this good side effect that all the places that examine the breakpoint's address see a consistent value, either `reqstd_address' or `placed_address', as required. Currently some places see either the original or the adjusted address in `placed_address', depending on whether they have been called before `gdbarch_remote_breakpoint_from_pc' or afterwards. This is in particular true for subsequent calls to `gdbarch_remote_breakpoint_from_pc' itself, e.g. from `one_breakpoint_xfer_memory'. This is also important for places like `find_single_step_breakpoint' where a breakpoint's address is compared to the raw value of $pc. * breakpoint.h (bp_target_info): Add `reqstd_address' member, update comments. * breakpoint.c (one_breakpoint_xfer_memory): Use `reqstd_address' for the breakpoint's address. Don't preinitialize `placed_size'. (insert_bp_location): Set `reqstd_address' rather than `placed_address'. (bp_target_info_copy_insertion_state): Also copy `placed_address'. (bkpt_insert_location): Use `reqstd_address' for the breakpoint's address. (bkpt_remove_location): Likewise. (deprecated_insert_raw_breakpoint): Likewise. (deprecated_remove_raw_breakpoint): Likewise. (find_single_step_breakpoint): Likewise. * mem-break.c (default_memory_insert_breakpoint): Use `reqstd_address' for the breakpoint's address. Don't set `placed_address' or `placed_size' if breakpoint contents couldn't have been determined. * remote.c (remote_insert_breakpoint): Use `reqstd_address' for the breakpoint's address. (remote_insert_hw_breakpoint): Likewise. Don't set `placed_address' or `placed_size' if breakpoint couldn't have been set. * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Use `reqstd_address' for the breakpoint's address. * arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Likewise. * ia64-tdep.c (ia64_memory_insert_breakpoint): Likewise. * m32r-tdep.c (m32r_memory_insert_breakpoint): Likewise. * microblaze-linux-tdep.c (microblaze_linux_memory_remove_breakpoint): Likewise. * monitor.c (monitor_insert_breakpoint): Likewise. * nto-procfs.c (procfs_insert_breakpoint): Likewise. (procfs_insert_hw_breakpoint): Likewise. * ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Likewise. * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise. * remote-m32r-sdi.c (m32r_insert_breakpoint): Likewise. * remote-mips.c (mips_insert_breakpoint): Likewise. * x86-nat.c (x86_insert_hw_breakpoint): Likewise.
2014-10-03 13:44:58 +02:00
memcpy (bp_tgt->shadow_contents, readbuf, bplen);
PR gdb/18002: Fix reinsert of a permanent breakpoints When we find out that a breakpoint is set on top of a program breakpoint, we mark it as "permanent". E.g.,: ... if (bp_loc_is_permanent (loc)) { loc->inserted = 1; loc->permanent = 1; } ... Note we didn't fill in the breakpoint's shadow (shadow_len remains 0). In case the target claims support for evaluating breakpoint conditions, GDB sometimes reinserts breakpoints that are already inserted (to update the conditions on the target side). Since GDB doesn't know whether the target supports evaluating conditions _of_ software breakpoints (vs hardware breakpoints, etc.) until it actually tries it, if the target doesn't actually support z0 breakpoints, GDB ends up reinserting a GDB-managed software/memory breakpoint (mem-break.c). And that is the case that is buggy: breakpoints that are marked inserted contribute their shadows (if any) to the memory returned by target_read_memory, to mask out breakpoints. Permanent breakpoints are always marked as inserted. So if the permanent breakpoint doesn't have a shadow yet in its shadow buffer, but we set shadow_len before calling target_read_memory, then the still clear shadow_contents buffer will be used by the breakpoint masking code... And then from there on, the permanent breakpoint has a broken shadow buffer, and thus any memory read out of that address will read bogus code, and many random bad things fall out from that. The fix is just to set shadow_len at the same time shadow_contents is set, not one before and another after... Fixes all gdb.base/bp-permanent.exp FAILs on PPC64 GNU/Linux gdbserver and probably any other gdbserver port that doesn't do z0 breakpoints. gdb/ChangeLog: 2015-03-05 Pedro Alves <palves@redhat.com> PR gdb/18002 * mem-break.c (default_memory_insert_breakpoint): Set shadow_len after reading the breakpoint's shadow memory.
2015-03-06 00:39:45 +01:00
Avoid software breakpoint's instruction shadow inconsistency This change: commit b775012e845380ed4c7421a1b87caf7bfae39f5f Author: Luis Machado <luisgpm@br.ibm.com> Date: Fri Feb 24 15:10:59 2012 +0000 2012-02-24 Luis Machado <lgustavo@codesourcery.com> * remote.c (remote_supports_cond_breakpoints): New forward declaration. [...] changed the way breakpoints are inserted and removed such that `insert_bp_location' can now be called with the breakpoint being handled already in place, while previously the call was only ever made for breakpoints that have not been put in place. This in turn caused an issue for software breakpoints and targets for which a breakpoint's `placed_address' may not be the same as the original requested address. The issue is `insert_bp_location' overwrites the previously adjusted value in `placed_address' with the original address, that is only replaced back with the correct adjusted address later on when `gdbarch_breakpoint_from_pc' is called. Meanwhile there's a window where the value in `placed_address' does not correspond to data stored in `shadow_contents', leading to incorrect instruction bytes being supplied when `one_breakpoint_xfer_memory' is called to supply the instruction overlaid by the breakpoint. And this is exactly what happens on the MIPS target with software breakpoints placed in microMIPS code. In this case not only `placed_address' is not the original address because of the ISA bit, but `mips_breakpoint_from_pc' has to read the original instruction to determine which one of the two software breakpoint instruction encodings to choose as well. The 16-bit encoding is used to replace 16-bit instructions and similarly the 32-bit one is used with 32-bit instructions, to satisfy branch delay slot size requirements. The mismatch between `placed_address' and the address data in `shadow_contents' has been obtained from leads to the wrong encoding being used in some cases, which in the case of a 32-bit software breakpoint instruction replacing a 16-bit instruction causes corruption to the adjacent following instruction and leads the debug session astray if execution reaches there e.g. with a jump. To address this problem I made the change below, that adds a `reqstd_address' field to `struct bp_target_info' and leaves `placed_address' unchanged once it has been set. This ensures data in `shadow_contents' is always consistent with `placed_address'. This approach also has this good side effect that all the places that examine the breakpoint's address see a consistent value, either `reqstd_address' or `placed_address', as required. Currently some places see either the original or the adjusted address in `placed_address', depending on whether they have been called before `gdbarch_remote_breakpoint_from_pc' or afterwards. This is in particular true for subsequent calls to `gdbarch_remote_breakpoint_from_pc' itself, e.g. from `one_breakpoint_xfer_memory'. This is also important for places like `find_single_step_breakpoint' where a breakpoint's address is compared to the raw value of $pc. * breakpoint.h (bp_target_info): Add `reqstd_address' member, update comments. * breakpoint.c (one_breakpoint_xfer_memory): Use `reqstd_address' for the breakpoint's address. Don't preinitialize `placed_size'. (insert_bp_location): Set `reqstd_address' rather than `placed_address'. (bp_target_info_copy_insertion_state): Also copy `placed_address'. (bkpt_insert_location): Use `reqstd_address' for the breakpoint's address. (bkpt_remove_location): Likewise. (deprecated_insert_raw_breakpoint): Likewise. (deprecated_remove_raw_breakpoint): Likewise. (find_single_step_breakpoint): Likewise. * mem-break.c (default_memory_insert_breakpoint): Use `reqstd_address' for the breakpoint's address. Don't set `placed_address' or `placed_size' if breakpoint contents couldn't have been determined. * remote.c (remote_insert_breakpoint): Use `reqstd_address' for the breakpoint's address. (remote_insert_hw_breakpoint): Likewise. Don't set `placed_address' or `placed_size' if breakpoint couldn't have been set. * aarch64-linux-nat.c (aarch64_linux_insert_hw_breakpoint): Use `reqstd_address' for the breakpoint's address. * arm-linux-nat.c (arm_linux_hw_breakpoint_initialize): Likewise. * ia64-tdep.c (ia64_memory_insert_breakpoint): Likewise. * m32r-tdep.c (m32r_memory_insert_breakpoint): Likewise. * microblaze-linux-tdep.c (microblaze_linux_memory_remove_breakpoint): Likewise. * monitor.c (monitor_insert_breakpoint): Likewise. * nto-procfs.c (procfs_insert_breakpoint): Likewise. (procfs_insert_hw_breakpoint): Likewise. * ppc-linux-nat.c (ppc_linux_insert_hw_breakpoint): Likewise. * ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Likewise. * remote-m32r-sdi.c (m32r_insert_breakpoint): Likewise. * remote-mips.c (mips_insert_breakpoint): Likewise. * x86-nat.c (x86_insert_hw_breakpoint): Likewise.
2014-10-03 13:44:58 +02:00
val = target_write_raw_memory (addr, bp, bplen);
Problem after hitting breakpoint on Windows (with GDBserver) When debugging on Windows with GDBserver, the debugger starts failing after hitting a breakpoint. For instance: (gdb) b foo Breakpoint 1 at 0x40177e: file foo.adb, line 5. (gdb) cont Continuing. Breakpoint 1, foo () at foo.adb:5 5 Put_Line ("Hello World."); -- STOP (gdb) n Program received signal SIGSEGV, Segmentation fault. 0x00401782 in foo () at foo.adb:5 5 Put_Line ("Hello World."); -- STOP There are two issues: 1. While trying to re-insert a breakpoint that is still inserted in memory, insert_bp_location wipes out the breakpoint location's shadow_contents. As a consequence, we cannot restore the proper instruction when removing the breakpoint anymore. That's why the inferior's behavior changes when trying to resume after the breakpoint was hit. 2. mem-break.c:default_memory_insert_breakpoint passes a breakpoint location's shadow_contents as the buffer for a memory read. This reveals a limitation of the various memory-read target functions. This patch documents this limitation and adjust the two calls that seem to hit that limitation. gdb/ChangeLog: * breakpoint.c (breakpoint_xfer_memory): Add assertion. Update function description. (insert_bp_location): Do not wipe bl->target_info out. * mem-break.c: #include "gdb_string.h". (default_memory_insert_breakpoint): Do not call target_read_memory with a pointer to the breakpoint's shadow_contents buffer. Use a local buffer instead. * m32r-tdep.c (m32r_memory_insert_breakpoint): Ditto.
2012-03-15 19:33:45 +01:00
}
return val;
}
int
default_memory_remove_breakpoint (struct gdbarch *gdbarch,
struct bp_target_info *bp_tgt)
{
return target_write_raw_memory (bp_tgt->placed_address, bp_tgt->shadow_contents,
bp_tgt->placed_size);
}
1999-10-19 04:47:02 +02:00
int
target, breakpoint: allow insert/remove breakpoint to be forwarded 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * target.h (target_ops) <to_insert_breakpoint> <to_remove_breakpoint>: Add target_ops parameter. (forward_target_insert_breakpoint): New. (forward_target_remove_breakpoint): New. (memory_remove_breakpoint, memory_insert_breakpoint): Add target_ops parameter. * target.c (target_insert_breakpoint): Split into this and ... (forward_target_insert_breakpoint): ... this. (target_remove_breakpoint): Split into this and ... (forward_target_remove_breakpoint): ... this. (debug_to_insert_breakpoint): Add target_ops parameter. Call forward_target_insert_breakpoint. (debug_to_remove_breakpoint): Add target_ops parameter. Call forward_target_remove_breakpoint. (update_current_target): Do not inherit or default to_insert_breakpoint and to_remove_breakpoint. * corelow.c (ignore): Add target_ops parameter. * exec.c (ignore): Add target_ops parameter. * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint): Add target_ops parameter. * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint): Add target_ops parameter. * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint): Add target_ops parameter. * record-full.c (record_full_beneath_to_insert_breakpoint) (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint) (tmp_to_remove_breakpoint, record_full_insert_breakpoint) (record_full_remove_breakpoint, record_full_core_insert_breakpoint) (record_full_core_remove_breakpoint): Add target_ops parameter. Update users. (record_full_beneath_to_insert_breakpoint_ops) (record_full_beneath_to_remove_breakpoint_ops) (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New. (record_full_open): Initialize tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops, record_full_beneath_to_insert_breakpoint_ops, and record_full_beneath_to_remove_breakpoint_ops. * remote-m32r-sdi.c (m32r_insert_breakpoint) (m32r_remove_breakpoint): Add target_ops parameter. * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint): Add target_ops parameter. * remote.c (remote_insert_breakpoint, remote_remove_breakpoint): Add target_ops parameter.
2013-12-17 10:49:03 +01:00
memory_insert_breakpoint (struct target_ops *ops, struct gdbarch *gdbarch,
* breakpoint.h (struct breakpoint): New member GDBARCH. * breakpoint.c: Include "arch-utils.h". (set_raw_breakpoint_without_location): Add GDBARCH parameter. Use it to set breakpoint architecture. (set_raw_breakpoint): Add GDBARCH parameter. (create_internal_breakpoint): Likewise. (create_catchpoint): Likewise. (create_fork_vfork_event_catchpoint): Likewise. (create_breakpoint): Likewise. (create_breakpoints): Likewise. (break_command_really): Likewise. (create_ada_exception_breakpoint): Likewise. Update local callers to pass architecture: (create_internal_breakpoint): Update. (create_overlay_event_breakpoint): Update. (create_longjmp_master_breakpoint): Update. (create_thread_event_breakpoint): Update. (create_solib_event_breakpoint): Update. (create_catchpoint): Update. (create_fork_vfork_event_catchpoint): Update. (set_momentary_breakpoint): Update. (clone_momentary_breakpoint): Update. (create_breakpoint): Update. (create_breakpoints): Update. (break_command_really): Update. (break_command_1): Update. (set_breakpoint): Update. (watch_command_1): Update. (catch_fork_command_1): Update. (catch_exec_commnd_1): Update. (handle_gnu_v3_exceptions): Update. (create_ada_exception_breakpoint): Update. (catch_ada_exception_command): Update. (catch_assert_command): Update. (trace_command): Update. * breakpoint.h (struct bp_location): New member GDBARCH. * breakpoint.c (get_sal_arch): New function. (set_raw_breakpoint): Set location architecture. (add_location_to_breakpoint): Likewise. (clone_momentary_breakpoint): Likewise. (watch_command_1): Likewise. (update_watchpoint): Likewise. (bp_loc_is_permanent): Use location architecture instead of current_gdbarch. (adjust_breakpoint_address): Add GDBARCH parameter; use it instead of current_gdbarch. Update callers of adjust_breakpoint_address to pass breakpoint location architecture: (set_raw_breakpoint): Update. (watch_command_1): Update. * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead of current_gdbarch. (add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol. (encode_actions): Pass tracepoint architecture to add_local_symbols (encode_actions): Use tracepoint architecture instead of current_gdbarch. Pass it to add_local_symbols and collect_symbol. * breakpoint.h (struct breakpoint_ops): Replace last_addr parameter of print_one callback with last_loc. * breakpoint.c (print_one_breakpoint_location): Replace last_addr parameter with last_loc. (print_one_breakpoint): Likewise. (do_captured_breakpoint_query): Update call. (breakpoint_1): Pass last_loc instead of last_addr to print_one_breakpoint. Pass last location architecture instead of current_gdbarch to set_next_address. Update all implementations of the print_one callback: * breakpoint.c (print_one_catch_fork): Update. (print_one_catch_vfork): Update. (print_one_catch_exec): Update. (print_one_exception_catchpoint): Update. * ada-lang.c (print_one_exception): Update. (print_one_catch_exception): Update. (print_one_catch_exception_unhandled): Update. (print_one_catch_assert): Update. * breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS parameter. Use it instead of gdbarch_addr_bit (current_gdbarch). (print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it to print_one_breakpoint_location. (breakpoint_address_bits): New function. (do_captured_breakpoint_query): Compute number of address bits to print and pass it to print_one_breakpoint. (breakpoint_1): Likewise. Use it instead of current_gdbarch. * breakpoint.h (create_thread_event_breakpoint): Add GDBARCH. * breakpoint.c (create_thread_event_breakpoint): Likewise. Update callers to create_thread_event_breakpoint: * aix-thread.c (pd_enable): Update. * linux-thread-db.c (enable_thread_event): Update. * breakpoint.h (create_solib_event_breakpoint): Add GDBARCH. * breakpoint.c (create_solib_event_breakpoint): Likewise. Update callers to create_solib_event_breakpoint: * solib-frv.c (enable_break, enable_break2): Update. * solib-pa64.c (pa64_solib_create_inferior_hook): Update. * solib-som.c (som_solib_create_inferior_hook): Update. * solib-darwin.c (darwin_solib_create_inferior_hook): Update. * solib-svr4.c (enable_break): Update. * breakpoint.h (insert_single_step_breakpoint): Add GDBARCH. * breakpoint.c (insert_single_step_breakpoint): Likewise. Update callers to insert_single_step_breakpoint: * alpha-tdep.c (alpha_software_single_step): Update. * arm-linux-tdep.c (arm_linux_software_single_step): Update. * arm-tdep.c (arm_software_single_step): Update. * cris-tdep.c (cris_software_single_step): Update. * rs6000-aix-tdep.c (rs6000_software_single_step): Update. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update. * sparc-tdep.c (sparc_software_single_step): Update. * spu-tdep.c (spu_software_single_step): Update. * mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter. Pass it to insert_single_step_breakpoint. (mips_software_single_step): Pass architecture to deal_with_atomic_sequence and insert_single_step_breakpoint. * breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH. (deprecated_remove_raw_breakpoint): Likewise. * breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH. (deprecated_remove_raw_breakpoint): Likewise. Update callers to deprecated_insert_raw_breakpoint and deprecated_remove_raw_breakpoint: * breakpoint.c (single_step_gdbarch): New static variable. (insert_single_step_breakpoint): Pass GDBARCH parameter to deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch. (remove_single_step_breakpoints): Pass architecture stored in single_step_gdbarch to deprecated_remove_raw_breakpoint. * rs6000-nat.c (exec_one_dummy_insn): Update. * solib-irix.c (enable_break, disable_break): Update. * procfs.c (procfs_mourn_inferior): Update. (remove_dbx_link_breakpoint): Update. * breakpoint.h (set_breakpoint): Add GDBARCH parameter. (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise. * breakpoint.c (set_breakpoint): Add GDBARCH parameter. (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise. Update callers to set_breakpoint, set_momentary_breakpoint and set_momentary_breakpoint_at_pc: * breakpoint.c (set_momentary_breakpoint_at_pc): Update. (until_break_command): Update. * infcall.c (call_function_by_hand): Update. * infcmd.c (finish_backward, finish_forward): Update. * infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH parameter. Pass it to set_momentary_breakpoint. (insert_longjmp_resume_breakpoint): Add GDBARCH parameter. Pass it to set_momentary_breakpoint_at_pc. (handle_inferior_event): Update. (insert_step_resume_breakpoint_at_frame): Update. (insert_step_resume_breakpoint_at_caller): Update.. * mi/mi-cmd-break.c: Include "arch-utils.h". (mi_cmd_break_insert): Update. * target.h (struct target_ops): Add GDBARCH parameter to to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint, and to_remove_hw_breakpoint members. (target_insert_breakpoint, target_remove_breakpoint, target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH parameter, pass to target routine. (memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH parameter. * target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint, debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add GDBARCH parameter, pass to target routine. (update_current_target): Update function signature. * breakpoint.c (insert_bp_location, remove_breakpoint, deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint): Pass architecture to target_ routines. Update all implementations of the target breakpoint routines to take GDBARCH parameter and use it instead of GDBARCH as appropriate: * corelow.c (ignore): Update. * exec.c (ignore): Update. * mem-break.c (memory_insert_breakpoint): Update. (memory_remove_breakpoint): Update. * monitor.c (monitor_insert_breakpoint): Update. (monitor_remove_breakpoint): Update. * record.c (record_insert_breakpoint): Update. (record_beneath_to_insert_breakpoint): Update. (record_remove_breakpoint): Update. (record_beneath_to_remove_breakpoint): Update. * remote.c (remote_insert_breakpoint): Update. (remote_remove_breakpoint): Update. (remote_insert_hw_breakpoint): Update. (remote_remove_hw_breakpoint): Update. * remote-m32r-sdi.c (m32r_insert_breakpoint): Update. (m32r_remove_breakpoint): Update. * remote-mips.c (mips_insert_breakpoint): Update. (mips_remove_breakpoint): Update. * i386-nat.c (i386_insert_hw_breakpoint): Update. (i386_remove_hw_breakpoint): Update. * nto-procfs.c (procfs_insert_breakpoint): Update. (procfs_remove_breakpoint): Update. (procfs_insert_hw_breakpoint): Update. (procfs_remove_hw_breakpoint): Update. doc/ChangeLog: * gdbint.texi (Examples of Use of @code{ui_out} functions): Update example code extrated from breakpoint.c.
2009-07-02 19:12:28 +02:00
struct bp_target_info *bp_tgt)
1999-10-19 04:47:02 +02:00
{
* breakpoint.h (struct breakpoint): New member GDBARCH. * breakpoint.c: Include "arch-utils.h". (set_raw_breakpoint_without_location): Add GDBARCH parameter. Use it to set breakpoint architecture. (set_raw_breakpoint): Add GDBARCH parameter. (create_internal_breakpoint): Likewise. (create_catchpoint): Likewise. (create_fork_vfork_event_catchpoint): Likewise. (create_breakpoint): Likewise. (create_breakpoints): Likewise. (break_command_really): Likewise. (create_ada_exception_breakpoint): Likewise. Update local callers to pass architecture: (create_internal_breakpoint): Update. (create_overlay_event_breakpoint): Update. (create_longjmp_master_breakpoint): Update. (create_thread_event_breakpoint): Update. (create_solib_event_breakpoint): Update. (create_catchpoint): Update. (create_fork_vfork_event_catchpoint): Update. (set_momentary_breakpoint): Update. (clone_momentary_breakpoint): Update. (create_breakpoint): Update. (create_breakpoints): Update. (break_command_really): Update. (break_command_1): Update. (set_breakpoint): Update. (watch_command_1): Update. (catch_fork_command_1): Update. (catch_exec_commnd_1): Update. (handle_gnu_v3_exceptions): Update. (create_ada_exception_breakpoint): Update. (catch_ada_exception_command): Update. (catch_assert_command): Update. (trace_command): Update. * breakpoint.h (struct bp_location): New member GDBARCH. * breakpoint.c (get_sal_arch): New function. (set_raw_breakpoint): Set location architecture. (add_location_to_breakpoint): Likewise. (clone_momentary_breakpoint): Likewise. (watch_command_1): Likewise. (update_watchpoint): Likewise. (bp_loc_is_permanent): Use location architecture instead of current_gdbarch. (adjust_breakpoint_address): Add GDBARCH parameter; use it instead of current_gdbarch. Update callers of adjust_breakpoint_address to pass breakpoint location architecture: (set_raw_breakpoint): Update. (watch_command_1): Update. * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead of current_gdbarch. (add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol. (encode_actions): Pass tracepoint architecture to add_local_symbols (encode_actions): Use tracepoint architecture instead of current_gdbarch. Pass it to add_local_symbols and collect_symbol. * breakpoint.h (struct breakpoint_ops): Replace last_addr parameter of print_one callback with last_loc. * breakpoint.c (print_one_breakpoint_location): Replace last_addr parameter with last_loc. (print_one_breakpoint): Likewise. (do_captured_breakpoint_query): Update call. (breakpoint_1): Pass last_loc instead of last_addr to print_one_breakpoint. Pass last location architecture instead of current_gdbarch to set_next_address. Update all implementations of the print_one callback: * breakpoint.c (print_one_catch_fork): Update. (print_one_catch_vfork): Update. (print_one_catch_exec): Update. (print_one_exception_catchpoint): Update. * ada-lang.c (print_one_exception): Update. (print_one_catch_exception): Update. (print_one_catch_exception_unhandled): Update. (print_one_catch_assert): Update. * breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS parameter. Use it instead of gdbarch_addr_bit (current_gdbarch). (print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it to print_one_breakpoint_location. (breakpoint_address_bits): New function. (do_captured_breakpoint_query): Compute number of address bits to print and pass it to print_one_breakpoint. (breakpoint_1): Likewise. Use it instead of current_gdbarch. * breakpoint.h (create_thread_event_breakpoint): Add GDBARCH. * breakpoint.c (create_thread_event_breakpoint): Likewise. Update callers to create_thread_event_breakpoint: * aix-thread.c (pd_enable): Update. * linux-thread-db.c (enable_thread_event): Update. * breakpoint.h (create_solib_event_breakpoint): Add GDBARCH. * breakpoint.c (create_solib_event_breakpoint): Likewise. Update callers to create_solib_event_breakpoint: * solib-frv.c (enable_break, enable_break2): Update. * solib-pa64.c (pa64_solib_create_inferior_hook): Update. * solib-som.c (som_solib_create_inferior_hook): Update. * solib-darwin.c (darwin_solib_create_inferior_hook): Update. * solib-svr4.c (enable_break): Update. * breakpoint.h (insert_single_step_breakpoint): Add GDBARCH. * breakpoint.c (insert_single_step_breakpoint): Likewise. Update callers to insert_single_step_breakpoint: * alpha-tdep.c (alpha_software_single_step): Update. * arm-linux-tdep.c (arm_linux_software_single_step): Update. * arm-tdep.c (arm_software_single_step): Update. * cris-tdep.c (cris_software_single_step): Update. * rs6000-aix-tdep.c (rs6000_software_single_step): Update. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update. * sparc-tdep.c (sparc_software_single_step): Update. * spu-tdep.c (spu_software_single_step): Update. * mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter. Pass it to insert_single_step_breakpoint. (mips_software_single_step): Pass architecture to deal_with_atomic_sequence and insert_single_step_breakpoint. * breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH. (deprecated_remove_raw_breakpoint): Likewise. * breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH. (deprecated_remove_raw_breakpoint): Likewise. Update callers to deprecated_insert_raw_breakpoint and deprecated_remove_raw_breakpoint: * breakpoint.c (single_step_gdbarch): New static variable. (insert_single_step_breakpoint): Pass GDBARCH parameter to deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch. (remove_single_step_breakpoints): Pass architecture stored in single_step_gdbarch to deprecated_remove_raw_breakpoint. * rs6000-nat.c (exec_one_dummy_insn): Update. * solib-irix.c (enable_break, disable_break): Update. * procfs.c (procfs_mourn_inferior): Update. (remove_dbx_link_breakpoint): Update. * breakpoint.h (set_breakpoint): Add GDBARCH parameter. (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise. * breakpoint.c (set_breakpoint): Add GDBARCH parameter. (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise. Update callers to set_breakpoint, set_momentary_breakpoint and set_momentary_breakpoint_at_pc: * breakpoint.c (set_momentary_breakpoint_at_pc): Update. (until_break_command): Update. * infcall.c (call_function_by_hand): Update. * infcmd.c (finish_backward, finish_forward): Update. * infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH parameter. Pass it to set_momentary_breakpoint. (insert_longjmp_resume_breakpoint): Add GDBARCH parameter. Pass it to set_momentary_breakpoint_at_pc. (handle_inferior_event): Update. (insert_step_resume_breakpoint_at_frame): Update. (insert_step_resume_breakpoint_at_caller): Update.. * mi/mi-cmd-break.c: Include "arch-utils.h". (mi_cmd_break_insert): Update. * target.h (struct target_ops): Add GDBARCH parameter to to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint, and to_remove_hw_breakpoint members. (target_insert_breakpoint, target_remove_breakpoint, target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH parameter, pass to target routine. (memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH parameter. * target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint, debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add GDBARCH parameter, pass to target routine. (update_current_target): Update function signature. * breakpoint.c (insert_bp_location, remove_breakpoint, deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint): Pass architecture to target_ routines. Update all implementations of the target breakpoint routines to take GDBARCH parameter and use it instead of GDBARCH as appropriate: * corelow.c (ignore): Update. * exec.c (ignore): Update. * mem-break.c (memory_insert_breakpoint): Update. (memory_remove_breakpoint): Update. * monitor.c (monitor_insert_breakpoint): Update. (monitor_remove_breakpoint): Update. * record.c (record_insert_breakpoint): Update. (record_beneath_to_insert_breakpoint): Update. (record_remove_breakpoint): Update. (record_beneath_to_remove_breakpoint): Update. * remote.c (remote_insert_breakpoint): Update. (remote_remove_breakpoint): Update. (remote_insert_hw_breakpoint): Update. (remote_remove_hw_breakpoint): Update. * remote-m32r-sdi.c (m32r_insert_breakpoint): Update. (m32r_remove_breakpoint): Update. * remote-mips.c (mips_insert_breakpoint): Update. (mips_remove_breakpoint): Update. * i386-nat.c (i386_insert_hw_breakpoint): Update. (i386_remove_hw_breakpoint): Update. * nto-procfs.c (procfs_insert_breakpoint): Update. (procfs_remove_breakpoint): Update. (procfs_insert_hw_breakpoint): Update. (procfs_remove_hw_breakpoint): Update. doc/ChangeLog: * gdbint.texi (Examples of Use of @code{ui_out} functions): Update example code extrated from breakpoint.c.
2009-07-02 19:12:28 +02:00
return gdbarch_memory_insert_breakpoint (gdbarch, bp_tgt);
1999-10-19 04:47:02 +02:00
}
int
target, breakpoint: allow insert/remove breakpoint to be forwarded 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * target.h (target_ops) <to_insert_breakpoint> <to_remove_breakpoint>: Add target_ops parameter. (forward_target_insert_breakpoint): New. (forward_target_remove_breakpoint): New. (memory_remove_breakpoint, memory_insert_breakpoint): Add target_ops parameter. * target.c (target_insert_breakpoint): Split into this and ... (forward_target_insert_breakpoint): ... this. (target_remove_breakpoint): Split into this and ... (forward_target_remove_breakpoint): ... this. (debug_to_insert_breakpoint): Add target_ops parameter. Call forward_target_insert_breakpoint. (debug_to_remove_breakpoint): Add target_ops parameter. Call forward_target_remove_breakpoint. (update_current_target): Do not inherit or default to_insert_breakpoint and to_remove_breakpoint. * corelow.c (ignore): Add target_ops parameter. * exec.c (ignore): Add target_ops parameter. * mem-break.c (memory_insert_breakpoint, memory_remove_breakpoint): Add target_ops parameter. * monitor.c (monitor_insert_breakpoint, monitor_remove_breakpoint): Add target_ops parameter. * nto-procfs.c (procfs_insert_breakpoint, procfs_remove_breakpoint): Add target_ops parameter. * record-full.c (record_full_beneath_to_insert_breakpoint) (record_full_beneath_to_remove_breakpoint, tmp_to_insert_breakpoint) (tmp_to_remove_breakpoint, record_full_insert_breakpoint) (record_full_remove_breakpoint, record_full_core_insert_breakpoint) (record_full_core_remove_breakpoint): Add target_ops parameter. Update users. (record_full_beneath_to_insert_breakpoint_ops) (record_full_beneath_to_remove_breakpoint_ops) (tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops): New. (record_full_open): Initialize tmp_to_insert_breakpoint_ops, tmp_to_remove_breakpoint_ops, record_full_beneath_to_insert_breakpoint_ops, and record_full_beneath_to_remove_breakpoint_ops. * remote-m32r-sdi.c (m32r_insert_breakpoint) (m32r_remove_breakpoint): Add target_ops parameter. * remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint): Add target_ops parameter. * remote.c (remote_insert_breakpoint, remote_remove_breakpoint): Add target_ops parameter.
2013-12-17 10:49:03 +01:00
memory_remove_breakpoint (struct target_ops *ops, struct gdbarch *gdbarch,
* breakpoint.h (struct breakpoint): New member GDBARCH. * breakpoint.c: Include "arch-utils.h". (set_raw_breakpoint_without_location): Add GDBARCH parameter. Use it to set breakpoint architecture. (set_raw_breakpoint): Add GDBARCH parameter. (create_internal_breakpoint): Likewise. (create_catchpoint): Likewise. (create_fork_vfork_event_catchpoint): Likewise. (create_breakpoint): Likewise. (create_breakpoints): Likewise. (break_command_really): Likewise. (create_ada_exception_breakpoint): Likewise. Update local callers to pass architecture: (create_internal_breakpoint): Update. (create_overlay_event_breakpoint): Update. (create_longjmp_master_breakpoint): Update. (create_thread_event_breakpoint): Update. (create_solib_event_breakpoint): Update. (create_catchpoint): Update. (create_fork_vfork_event_catchpoint): Update. (set_momentary_breakpoint): Update. (clone_momentary_breakpoint): Update. (create_breakpoint): Update. (create_breakpoints): Update. (break_command_really): Update. (break_command_1): Update. (set_breakpoint): Update. (watch_command_1): Update. (catch_fork_command_1): Update. (catch_exec_commnd_1): Update. (handle_gnu_v3_exceptions): Update. (create_ada_exception_breakpoint): Update. (catch_ada_exception_command): Update. (catch_assert_command): Update. (trace_command): Update. * breakpoint.h (struct bp_location): New member GDBARCH. * breakpoint.c (get_sal_arch): New function. (set_raw_breakpoint): Set location architecture. (add_location_to_breakpoint): Likewise. (clone_momentary_breakpoint): Likewise. (watch_command_1): Likewise. (update_watchpoint): Likewise. (bp_loc_is_permanent): Use location architecture instead of current_gdbarch. (adjust_breakpoint_address): Add GDBARCH parameter; use it instead of current_gdbarch. Update callers of adjust_breakpoint_address to pass breakpoint location architecture: (set_raw_breakpoint): Update. (watch_command_1): Update. * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead of current_gdbarch. (add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol. (encode_actions): Pass tracepoint architecture to add_local_symbols (encode_actions): Use tracepoint architecture instead of current_gdbarch. Pass it to add_local_symbols and collect_symbol. * breakpoint.h (struct breakpoint_ops): Replace last_addr parameter of print_one callback with last_loc. * breakpoint.c (print_one_breakpoint_location): Replace last_addr parameter with last_loc. (print_one_breakpoint): Likewise. (do_captured_breakpoint_query): Update call. (breakpoint_1): Pass last_loc instead of last_addr to print_one_breakpoint. Pass last location architecture instead of current_gdbarch to set_next_address. Update all implementations of the print_one callback: * breakpoint.c (print_one_catch_fork): Update. (print_one_catch_vfork): Update. (print_one_catch_exec): Update. (print_one_exception_catchpoint): Update. * ada-lang.c (print_one_exception): Update. (print_one_catch_exception): Update. (print_one_catch_exception_unhandled): Update. (print_one_catch_assert): Update. * breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS parameter. Use it instead of gdbarch_addr_bit (current_gdbarch). (print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it to print_one_breakpoint_location. (breakpoint_address_bits): New function. (do_captured_breakpoint_query): Compute number of address bits to print and pass it to print_one_breakpoint. (breakpoint_1): Likewise. Use it instead of current_gdbarch. * breakpoint.h (create_thread_event_breakpoint): Add GDBARCH. * breakpoint.c (create_thread_event_breakpoint): Likewise. Update callers to create_thread_event_breakpoint: * aix-thread.c (pd_enable): Update. * linux-thread-db.c (enable_thread_event): Update. * breakpoint.h (create_solib_event_breakpoint): Add GDBARCH. * breakpoint.c (create_solib_event_breakpoint): Likewise. Update callers to create_solib_event_breakpoint: * solib-frv.c (enable_break, enable_break2): Update. * solib-pa64.c (pa64_solib_create_inferior_hook): Update. * solib-som.c (som_solib_create_inferior_hook): Update. * solib-darwin.c (darwin_solib_create_inferior_hook): Update. * solib-svr4.c (enable_break): Update. * breakpoint.h (insert_single_step_breakpoint): Add GDBARCH. * breakpoint.c (insert_single_step_breakpoint): Likewise. Update callers to insert_single_step_breakpoint: * alpha-tdep.c (alpha_software_single_step): Update. * arm-linux-tdep.c (arm_linux_software_single_step): Update. * arm-tdep.c (arm_software_single_step): Update. * cris-tdep.c (cris_software_single_step): Update. * rs6000-aix-tdep.c (rs6000_software_single_step): Update. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update. * sparc-tdep.c (sparc_software_single_step): Update. * spu-tdep.c (spu_software_single_step): Update. * mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter. Pass it to insert_single_step_breakpoint. (mips_software_single_step): Pass architecture to deal_with_atomic_sequence and insert_single_step_breakpoint. * breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH. (deprecated_remove_raw_breakpoint): Likewise. * breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH. (deprecated_remove_raw_breakpoint): Likewise. Update callers to deprecated_insert_raw_breakpoint and deprecated_remove_raw_breakpoint: * breakpoint.c (single_step_gdbarch): New static variable. (insert_single_step_breakpoint): Pass GDBARCH parameter to deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch. (remove_single_step_breakpoints): Pass architecture stored in single_step_gdbarch to deprecated_remove_raw_breakpoint. * rs6000-nat.c (exec_one_dummy_insn): Update. * solib-irix.c (enable_break, disable_break): Update. * procfs.c (procfs_mourn_inferior): Update. (remove_dbx_link_breakpoint): Update. * breakpoint.h (set_breakpoint): Add GDBARCH parameter. (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise. * breakpoint.c (set_breakpoint): Add GDBARCH parameter. (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise. Update callers to set_breakpoint, set_momentary_breakpoint and set_momentary_breakpoint_at_pc: * breakpoint.c (set_momentary_breakpoint_at_pc): Update. (until_break_command): Update. * infcall.c (call_function_by_hand): Update. * infcmd.c (finish_backward, finish_forward): Update. * infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH parameter. Pass it to set_momentary_breakpoint. (insert_longjmp_resume_breakpoint): Add GDBARCH parameter. Pass it to set_momentary_breakpoint_at_pc. (handle_inferior_event): Update. (insert_step_resume_breakpoint_at_frame): Update. (insert_step_resume_breakpoint_at_caller): Update.. * mi/mi-cmd-break.c: Include "arch-utils.h". (mi_cmd_break_insert): Update. * target.h (struct target_ops): Add GDBARCH parameter to to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint, and to_remove_hw_breakpoint members. (target_insert_breakpoint, target_remove_breakpoint, target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH parameter, pass to target routine. (memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH parameter. * target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint, debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add GDBARCH parameter, pass to target routine. (update_current_target): Update function signature. * breakpoint.c (insert_bp_location, remove_breakpoint, deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint): Pass architecture to target_ routines. Update all implementations of the target breakpoint routines to take GDBARCH parameter and use it instead of GDBARCH as appropriate: * corelow.c (ignore): Update. * exec.c (ignore): Update. * mem-break.c (memory_insert_breakpoint): Update. (memory_remove_breakpoint): Update. * monitor.c (monitor_insert_breakpoint): Update. (monitor_remove_breakpoint): Update. * record.c (record_insert_breakpoint): Update. (record_beneath_to_insert_breakpoint): Update. (record_remove_breakpoint): Update. (record_beneath_to_remove_breakpoint): Update. * remote.c (remote_insert_breakpoint): Update. (remote_remove_breakpoint): Update. (remote_insert_hw_breakpoint): Update. (remote_remove_hw_breakpoint): Update. * remote-m32r-sdi.c (m32r_insert_breakpoint): Update. (m32r_remove_breakpoint): Update. * remote-mips.c (mips_insert_breakpoint): Update. (mips_remove_breakpoint): Update. * i386-nat.c (i386_insert_hw_breakpoint): Update. (i386_remove_hw_breakpoint): Update. * nto-procfs.c (procfs_insert_breakpoint): Update. (procfs_remove_breakpoint): Update. (procfs_insert_hw_breakpoint): Update. (procfs_remove_hw_breakpoint): Update. doc/ChangeLog: * gdbint.texi (Examples of Use of @code{ui_out} functions): Update example code extrated from breakpoint.c.
2009-07-02 19:12:28 +02:00
struct bp_target_info *bp_tgt)
1999-10-19 04:47:02 +02:00
{
* breakpoint.h (struct breakpoint): New member GDBARCH. * breakpoint.c: Include "arch-utils.h". (set_raw_breakpoint_without_location): Add GDBARCH parameter. Use it to set breakpoint architecture. (set_raw_breakpoint): Add GDBARCH parameter. (create_internal_breakpoint): Likewise. (create_catchpoint): Likewise. (create_fork_vfork_event_catchpoint): Likewise. (create_breakpoint): Likewise. (create_breakpoints): Likewise. (break_command_really): Likewise. (create_ada_exception_breakpoint): Likewise. Update local callers to pass architecture: (create_internal_breakpoint): Update. (create_overlay_event_breakpoint): Update. (create_longjmp_master_breakpoint): Update. (create_thread_event_breakpoint): Update. (create_solib_event_breakpoint): Update. (create_catchpoint): Update. (create_fork_vfork_event_catchpoint): Update. (set_momentary_breakpoint): Update. (clone_momentary_breakpoint): Update. (create_breakpoint): Update. (create_breakpoints): Update. (break_command_really): Update. (break_command_1): Update. (set_breakpoint): Update. (watch_command_1): Update. (catch_fork_command_1): Update. (catch_exec_commnd_1): Update. (handle_gnu_v3_exceptions): Update. (create_ada_exception_breakpoint): Update. (catch_ada_exception_command): Update. (catch_assert_command): Update. (trace_command): Update. * breakpoint.h (struct bp_location): New member GDBARCH. * breakpoint.c (get_sal_arch): New function. (set_raw_breakpoint): Set location architecture. (add_location_to_breakpoint): Likewise. (clone_momentary_breakpoint): Likewise. (watch_command_1): Likewise. (update_watchpoint): Likewise. (bp_loc_is_permanent): Use location architecture instead of current_gdbarch. (adjust_breakpoint_address): Add GDBARCH parameter; use it instead of current_gdbarch. Update callers of adjust_breakpoint_address to pass breakpoint location architecture: (set_raw_breakpoint): Update. (watch_command_1): Update. * tracepoint.c: (collect_symbol): Add GDBARCH parameter, use instead of current_gdbarch. (add_local_symbols): Add GDBARCH parameter. Pass to collect_symbol. (encode_actions): Pass tracepoint architecture to add_local_symbols (encode_actions): Use tracepoint architecture instead of current_gdbarch. Pass it to add_local_symbols and collect_symbol. * breakpoint.h (struct breakpoint_ops): Replace last_addr parameter of print_one callback with last_loc. * breakpoint.c (print_one_breakpoint_location): Replace last_addr parameter with last_loc. (print_one_breakpoint): Likewise. (do_captured_breakpoint_query): Update call. (breakpoint_1): Pass last_loc instead of last_addr to print_one_breakpoint. Pass last location architecture instead of current_gdbarch to set_next_address. Update all implementations of the print_one callback: * breakpoint.c (print_one_catch_fork): Update. (print_one_catch_vfork): Update. (print_one_catch_exec): Update. (print_one_exception_catchpoint): Update. * ada-lang.c (print_one_exception): Update. (print_one_catch_exception): Update. (print_one_catch_exception_unhandled): Update. (print_one_catch_assert): Update. * breakpoint.c (print_one_breakpoint_location): Add PRINT_ADDRESS_BITS parameter. Use it instead of gdbarch_addr_bit (current_gdbarch). (print_one_breakpoint): Add PRINT_ADDRESS_BITS parameter and pass it to print_one_breakpoint_location. (breakpoint_address_bits): New function. (do_captured_breakpoint_query): Compute number of address bits to print and pass it to print_one_breakpoint. (breakpoint_1): Likewise. Use it instead of current_gdbarch. * breakpoint.h (create_thread_event_breakpoint): Add GDBARCH. * breakpoint.c (create_thread_event_breakpoint): Likewise. Update callers to create_thread_event_breakpoint: * aix-thread.c (pd_enable): Update. * linux-thread-db.c (enable_thread_event): Update. * breakpoint.h (create_solib_event_breakpoint): Add GDBARCH. * breakpoint.c (create_solib_event_breakpoint): Likewise. Update callers to create_solib_event_breakpoint: * solib-frv.c (enable_break, enable_break2): Update. * solib-pa64.c (pa64_solib_create_inferior_hook): Update. * solib-som.c (som_solib_create_inferior_hook): Update. * solib-darwin.c (darwin_solib_create_inferior_hook): Update. * solib-svr4.c (enable_break): Update. * breakpoint.h (insert_single_step_breakpoint): Add GDBARCH. * breakpoint.c (insert_single_step_breakpoint): Likewise. Update callers to insert_single_step_breakpoint: * alpha-tdep.c (alpha_software_single_step): Update. * arm-linux-tdep.c (arm_linux_software_single_step): Update. * arm-tdep.c (arm_software_single_step): Update. * cris-tdep.c (cris_software_single_step): Update. * rs6000-aix-tdep.c (rs6000_software_single_step): Update. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Update. * sparc-tdep.c (sparc_software_single_step): Update. * spu-tdep.c (spu_software_single_step): Update. * mips-tdep.c (deal_with_atomic_sequence): Add GDBARCH parameter. Pass it to insert_single_step_breakpoint. (mips_software_single_step): Pass architecture to deal_with_atomic_sequence and insert_single_step_breakpoint. * breakpoint.h (deprecated_insert_raw_breakpoint): Add GDBARCH. (deprecated_remove_raw_breakpoint): Likewise. * breakpoint.c (deprecated_insert_raw_breakpoint): Add GDBARCH. (deprecated_remove_raw_breakpoint): Likewise. Update callers to deprecated_insert_raw_breakpoint and deprecated_remove_raw_breakpoint: * breakpoint.c (single_step_gdbarch): New static variable. (insert_single_step_breakpoint): Pass GDBARCH parameter to deprecated_insert_raw_breakpoint. Store it in single_step_gdbarch. (remove_single_step_breakpoints): Pass architecture stored in single_step_gdbarch to deprecated_remove_raw_breakpoint. * rs6000-nat.c (exec_one_dummy_insn): Update. * solib-irix.c (enable_break, disable_break): Update. * procfs.c (procfs_mourn_inferior): Update. (remove_dbx_link_breakpoint): Update. * breakpoint.h (set_breakpoint): Add GDBARCH parameter. (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise. * breakpoint.c (set_breakpoint): Add GDBARCH parameter. (set_momentary_breakpoint, set_momentary_breakpoint_at_pc): Likewise. Update callers to set_breakpoint, set_momentary_breakpoint and set_momentary_breakpoint_at_pc: * breakpoint.c (set_momentary_breakpoint_at_pc): Update. (until_break_command): Update. * infcall.c (call_function_by_hand): Update. * infcmd.c (finish_backward, finish_forward): Update. * infrun.c (insert_step_resume_breakpoint_at_sal): Add GDBARCH parameter. Pass it to set_momentary_breakpoint. (insert_longjmp_resume_breakpoint): Add GDBARCH parameter. Pass it to set_momentary_breakpoint_at_pc. (handle_inferior_event): Update. (insert_step_resume_breakpoint_at_frame): Update. (insert_step_resume_breakpoint_at_caller): Update.. * mi/mi-cmd-break.c: Include "arch-utils.h". (mi_cmd_break_insert): Update. * target.h (struct target_ops): Add GDBARCH parameter to to_insert_breakpoint, to_remove_breakpoint, to_insert_hw_breakpoint, and to_remove_hw_breakpoint members. (target_insert_breakpoint, target_remove_breakpoint, target_insert_hw_breakpoint, target_remove_hw_breakpoint): Add GDBARCH parameter, pass to target routine. (memory_remove_breakpoint, memory_insert_breakpoint): Add GDBARCH parameter. * target.c (debug_to_insert_breakpoint, debug_to_remove_breakpoint, debug_to_insert_hw_breakpoint, debug_to_remove_hw_breakpoint): Add GDBARCH parameter, pass to target routine. (update_current_target): Update function signature. * breakpoint.c (insert_bp_location, remove_breakpoint, deprecated_insert_raw_breakpoint, deprecated_remove_raw_breakpoint): Pass architecture to target_ routines. Update all implementations of the target breakpoint routines to take GDBARCH parameter and use it instead of GDBARCH as appropriate: * corelow.c (ignore): Update. * exec.c (ignore): Update. * mem-break.c (memory_insert_breakpoint): Update. (memory_remove_breakpoint): Update. * monitor.c (monitor_insert_breakpoint): Update. (monitor_remove_breakpoint): Update. * record.c (record_insert_breakpoint): Update. (record_beneath_to_insert_breakpoint): Update. (record_remove_breakpoint): Update. (record_beneath_to_remove_breakpoint): Update. * remote.c (remote_insert_breakpoint): Update. (remote_remove_breakpoint): Update. (remote_insert_hw_breakpoint): Update. (remote_remove_hw_breakpoint): Update. * remote-m32r-sdi.c (m32r_insert_breakpoint): Update. (m32r_remove_breakpoint): Update. * remote-mips.c (mips_insert_breakpoint): Update. (mips_remove_breakpoint): Update. * i386-nat.c (i386_insert_hw_breakpoint): Update. (i386_remove_hw_breakpoint): Update. * nto-procfs.c (procfs_insert_breakpoint): Update. (procfs_remove_breakpoint): Update. (procfs_insert_hw_breakpoint): Update. (procfs_remove_hw_breakpoint): Update. doc/ChangeLog: * gdbint.texi (Examples of Use of @code{ui_out} functions): Update example code extrated from breakpoint.c.
2009-07-02 19:12:28 +02:00
return gdbarch_memory_remove_breakpoint (gdbarch, bp_tgt);
1999-10-19 04:47:02 +02:00
}
Stale breakpoint instructions, spurious SIGTRAPS. Without the code portion of the patch, we get these failures: FAIL: gdb.base/break-unload-file.exp: always-inserted on: break: continue FAIL: gdb.base/break-unload-file.exp: always-inserted on: hbreak: continue FAIL: gdb.base/sym-file.exp: stale bkpts: continue to breakpoint: end here They all looks like random SIGTRAPs: continue Continuing. Program received signal SIGTRAP, Trace/breakpoint trap. 0x0000000000400541 in foo () at ../../../src/gdb/testsuite/gdb.base/break-unload-file.c:21 21 } (gdb) FAIL: gdb.base/break-unload-file.exp: always-inserted on: break: continue (This is a regression caused by the remove-symbol-file command series.) break-unload-file.exp is about having breakpoints inserted, and then doing "file". I caught this while writing a test that does "file PROGRAM", while PROGRAM was already loaded, which internally does "file" first, because I wanted to force a breakpoint_re_set, but the test is more explicit in case GDB ever optimizes out that re-set. The problem is that unloading the file with "file" ends up in disable_breakpoints_in_freed_objfile, which marks all breakpoint locations of the objfile as both shlib_disabled, _and_ clears the inserted flag, without actually removing the breakpoints from the inferior. Now, usually, in all-stop, breakpoints will already be removed from the inferior before the user can issue the "file" command, but, with non-stop, or breakpoints always-inserted on mode, breakpoints stay inserted even while the user has the prompt. In the latter case, then, if we let the program continue, and it executes the address where we had previously set the breakpoint, it'll actually execute the breakpoint instruction that we left behind... Now, one issue is that the intent of disable_breakpoints_in_freed_objfile is really to handle the unloading of OBJF_USERLOADED objfiles. These are objfiles that were added with add-symbol-file and that are removed with remove-symbol-file. "add-symbol-file"'s docs in the manual clearly say these commands are used to let GDB know about dynamically loaded code: You would use this command when @var{filename} has been dynamically loaded (by some other means) into the program that is running. Similarly, the online help says: (gdb) help add-symbol-file Load symbols from FILE, assuming FILE has been dynamically loaded. So it makes sense to, like when shared libraries are unloaded through the generic solib machinery, mark the breakpoint locations as shlib_disabled. But, the "file" command is not about dynamically loaded code, it's about the main program. So the patch makes disable_breakpoints_in_freed_objfile skip all objfiles but OBJF_USERLOADED ones, thus skipping the main objfile. Then, the reason that disable_breakpoints_in_freed_objfile was clearing the inserted flag isn't clear, but likely to avoid breakpoint removal errors, assuming remove-symbol-file was called after the dynamic object was already unmapped from the inferior. In that case, it'd okay to simply clear the inserted flag, but not so if the user for example does remove-symbol-file to remove the library because he made a mistake in the library's address, and wants to re-do add-symbol-file with the correct address. To address all that, I propose an alternative implementation, that handles both cases. The patch includes changes to sym-file.exp to cover them. This implementation leaves the inserted flag alone, and handles breakpoint insertion/removal failure gracefully when the locations are in OBJF_USERLOADED objfiles, just like we handle insertion/removal failure gracefully for locations in shared libraries. To try to make sure we aren't patching back stale shadow memory contents into the inferior, in case the program mapped a different library at the same address where we had the breakpoint, without the user having had a chance of remove-symbol-file'ing before, this adds a new memory_validate_breakpoint function that checks if the breakpoint instruction is still in memory. ppc_linux_memory_remove_breakpoint does this unconditionally for all memory breakpoints, and questions whether memory_remove_breakpoint should be changed to do this for all breakpoints. Possibly yes, though I'm not certain, hence this baby-steps patch. Tested on x86_64 Fedora 17, native and gdbserver. gdb/ 2014-04-23 Pedro Alves <palves@redhat.com> * breakpoint.c (insert_bp_location): Tolerate errors if the breakpoint is set in a user-loaded objfile. (remove_breakpoint_1): Likewise. Also tolerate errors if the location is marked shlib_disabled. If the breakpoint is set in a user-loaded objfile is a GDB-side memory breakpoint, validate it before uninsertion. (disable_breakpoints_in_freed_objfile): Skip non-OBJF_USERLOADED objfiles. Don't clear the location's inserted flag. * mem-break.c (memory_validate_breakpoint): New function. * objfiles.c (userloaded_objfile_contains_address_p): New function. * objfiles.h (userloaded_objfile_contains_address_p): Declare. * target.h (memory_validate_breakpoint): New declaration. gdb/testsuite/ 2014-04-23 Pedro Alves <palves@redhat.com> * gdb.base/break-unload-file.c: New file. * gdb.base/break-unload-file.exp: New file. * gdb.base/sym-file-lib.c (baz): New function. * gdb.base/sym-file-loader.c (struct segment) <mapped_size>: New field. (load): Store the segment's mapped size. (unload): New function. (unload_shlib): New function. * gdb.base/sym-file-loader.h (unload_shlib): New declaration. * gdb.base/sym-file-main.c (main): Unload, and reload the library, set a breakpoint at baz, and call it. * gdb.base/sym-file.exp: New tests for stale breakpoint instructions.
2014-04-23 00:19:19 +02:00
int
memory_validate_breakpoint (struct gdbarch *gdbarch,
struct bp_target_info *bp_tgt)
{
CORE_ADDR addr = bp_tgt->placed_address;
const gdb_byte *bp;
int val;
int bplen;
gdb_byte cur_contents[BREAKPOINT_MAX];
struct cleanup *cleanup;
int ret;
/* Determine appropriate breakpoint contents and size for this
address. */
bp = gdbarch_breakpoint_from_pc (gdbarch, &addr, &bplen);
if (bp == NULL || bp_tgt->placed_size != bplen)
return 0;
/* Make sure we see the memory breakpoints. */
cleanup = make_show_memory_breakpoints_cleanup (1);
val = target_read_memory (addr, cur_contents, bplen);
/* If our breakpoint is no longer at the address, this means that
the program modified the code on us, so it is wrong to put back
the old value. */
ret = (val == 0 && memcmp (bp, cur_contents, bplen) == 0);
do_cleanups (cleanup);
return ret;
}