2017-01-01 07:50:51 +01:00
# Copyright 1988-2017 Free Software Foundation, Inc.
1999-04-16 03:35:26 +02:00
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
2007-08-23 20:14:19 +02:00
# the Free Software Foundation; either version 3 of the License, or
1999-04-16 03:35:26 +02:00
# (at your option) any later version.
2007-08-23 20:14:19 +02:00
#
1999-04-16 03:35:26 +02:00
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
2007-08-23 20:14:19 +02:00
#
1999-04-16 03:35:26 +02:00
# You should have received a copy of the GNU General Public License
2007-08-23 20:14:19 +02:00
# along with this program. If not, see <http://www.gnu.org/licenses/>.
1999-04-16 03:35:26 +02:00
# This file was written by Rob Savoye. (rob@cygnus.com)
2016-12-23 17:52:18 +01:00
if { [prepare_for_testing "failed to prepare" "break" {break.c break1.c} {debug nowarnings}] } {
1999-06-28 18:06:02 +02:00
return -1
}
2008-04-07 18:32:44 +02:00
set srcfile break.c
set srcfile1 break1.c
1999-04-16 03:35:26 +02:00
#
# test simple breakpoint setting commands
#
# Test deleting all breakpoints when there are none installed,
# GDB should not prompt for confirmation.
2005-11-09 07:41:30 +01:00
# Note that lib/gdb.exp provides a "delete_breakpoints" proc
1999-04-16 03:35:26 +02:00
# for general use elsewhere.
send_gdb "delete breakpoints\n"
gdb_expect {
-re "Delete all breakpoints.*$" {
send_gdb "y\n"
gdb_expect {
-re "$gdb_prompt $" {
2016-12-01 21:40:05 +01:00
fail "delete all breakpoints when none (unexpected prompt)"
1999-04-16 03:35:26 +02:00
}
2016-12-01 21:40:05 +01:00
timeout { fail "delete all breakpoints when none (timeout after unexpected prompt)" }
1999-04-16 03:35:26 +02:00
}
}
2016-12-01 21:40:05 +01:00
-re ".*$gdb_prompt $" { pass "delete all breakpoints when none" }
timeout { fail "delete all breakpoints when none (timeout)" }
1999-04-16 03:35:26 +02:00
}
#
# test break at function
#
gdb_test "break main" \
"Breakpoint.*at.* file .*$srcfile, line.*" \
"breakpoint function"
2002-05-13 03:18:19 +02:00
#
# test break at quoted function
#
gdb_test "break \"marker2\"" \
2003-12-09 19:19:20 +01:00
"Breakpoint.*at.* file .*$srcfile1, line.*" \
2002-05-13 03:18:19 +02:00
"breakpoint quoted function"
1999-04-16 03:35:26 +02:00
#
# test break at function in file
#
gdb_test "break $srcfile:factorial" \
"Breakpoint.*at.* file .*$srcfile, line.*" \
"breakpoint function in file"
2003-11-13 16:34:39 +01:00
set bp_location1 [gdb_get_line_number "set breakpoint 1 here"]
1999-04-16 03:35:26 +02:00
#
# test break at line number
#
2000-02-16 01:11:07 +01:00
# Note that the default source file is the last one whose source text
# was printed. For native debugging, before we've executed the
# program, this is the file containing main, but for remote debugging,
# it's wherever the processor was stopped when we connected to the
# board. So, to be sure, we do a list command.
#
gdb_test "list main" \
2014-10-22 11:24:25 +02:00
".*main \\(int argc, char \\*\\*argv, char \\*\\*envp\\).*" \
2000-02-16 01:11:07 +01:00
"use `list' to establish default source file"
2003-11-13 16:34:39 +01:00
gdb_test "break $bp_location1" \
"Breakpoint.*at.* file .*$srcfile, line $bp_location1\\." \
1999-04-16 03:35:26 +02:00
"breakpoint line number"
#
# test duplicate breakpoint
#
2003-11-13 16:34:39 +01:00
gdb_test "break $bp_location1" \
"Note: breakpoint \[0-9\]+ also set at pc.*Breakpoint \[0-9\]+ at.* file .*$srcfile, line $bp_location1\\." \
1999-04-16 03:35:26 +02:00
"breakpoint duplicate"
2003-11-13 16:34:39 +01:00
set bp_location2 [gdb_get_line_number "set breakpoint 2 here"]
1999-04-16 03:35:26 +02:00
#
# test break at line number in file
#
2003-11-13 16:34:39 +01:00
gdb_test "break $srcfile:$bp_location2" \
"Breakpoint.*at.* file .*$srcfile, line $bp_location2\\." \
1999-04-16 03:35:26 +02:00
"breakpoint line number in file"
2003-11-13 16:34:39 +01:00
set bp_location3 [gdb_get_line_number "set breakpoint 3 here"]
set bp_location4 [gdb_get_line_number "set breakpoint 4 here"]
1999-04-16 03:35:26 +02:00
2002-01-07 20:21:27 +01:00
#
# Test putting a break at the start of a multi-line if conditional.
# Verify the breakpoint was put at the start of the conditional.
#
gdb_test "break multi_line_if_conditional" \
2003-11-13 16:34:39 +01:00
"Breakpoint.*at.* file .*$srcfile, line $bp_location3\\." \
2002-01-07 20:21:27 +01:00
"breakpoint at start of multi line if conditional"
gdb_test "break multi_line_while_conditional" \
2003-11-13 16:34:39 +01:00
"Breakpoint.*at.* file .*$srcfile, line $bp_location4\\." \
2002-01-07 20:21:27 +01:00
"breakpoint at start of multi line while conditional"
2003-11-13 16:34:39 +01:00
set bp_location6 [gdb_get_line_number "set breakpoint 6 here"]
2011-12-13 18:22:11 +01:00
set main_line $bp_location6
1999-04-16 03:35:26 +02:00
2003-11-13 16:34:39 +01:00
set bp_location7 [gdb_get_line_number "set breakpoint 7 here"]
2003-12-09 19:19:20 +01:00
set bp_location8 [gdb_get_line_number "set breakpoint 8 here" $srcfile1]
2003-11-13 16:34:39 +01:00
1999-04-16 03:35:26 +02:00
gdb_test "info break" \
2008-02-26 09:14:11 +01:00
"Num Type\[ \]+Disp Enb Address\[ \]+What.*
1999-04-16 03:35:26 +02:00
\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$main_line.*
2014-10-22 11:24:25 +02:00
\[0-9\]+\[\t \]+breakpoint keep y.* in marker2 at .*$srcfile1:$bp_location8.*
2015-12-21 17:23:43 +01:00
\[0-9\]+\[\t \]+breakpoint keep y.* in factorial at .*$srcfile:$bp_location7.*
2003-11-13 16:34:39 +01:00
\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.*
\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.*
\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location2.*
\[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_if_conditional at .*$srcfile:$bp_location3.*
\[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_while_conditional at .*$srcfile:$bp_location4" \
1999-04-16 03:35:26 +02:00
"breakpoint info"
2011-02-23 20:20:39 +01:00
#
# Test info breakpoint with arguments
#
set see1 0
set see2 0
set see3 0
set see4 0
set see5 0
set see6 0
gdb_test_multiple "info break 2 4 6" "info break 2 4 6" {
-re "1\[\t \]+breakpoint *keep y\[^\r\n\]*:$main_line\[^\r\n\]*" {
set see1 1
exp_continue
}
-re "2\[\t \]+breakpoint *keep y\[^\r\n\]* in marker2 at \[^\r\n\]*" {
set see2 1
exp_continue
}
-re "3\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location7\[^\r\n\]*" {
set see3 1
exp_continue
}
-re "4\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location1\[^\r\n\]*" {
set see4 1
exp_continue
}
-re "5\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location1\[^\r\n\]*" {
set see5 1
exp_continue
}
-re "6\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location2\[^\r\n\]*" {
set see6 1
exp_continue
}
-re ".*$gdb_prompt $" {
if { !$see1 && $see2 && !$see3 && $see4 && !$see5 && $see6 } then {
pass "info break 2 4 6"
} else {
fail "info break 2 4 6"
}
}
}
set see1 0
set see2 0
set see3 0
set see4 0
set see5 0
set see6 0
gdb_test_multiple "info break 3-5" "info break 3-5" {
-re "1\[\t \]+breakpoint *keep y.* in main at .*:$main_line\[^\r\n\]*" {
set see1 1
exp_continue
}
-re "2\[\t \]+breakpoint *keep y\[^\r\n\]* in marker2 at \[^\r\n\]*" {
set see2 1
exp_continue
}
-re "3\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location7\[^\r\n\]*" {
set see3 1
exp_continue
}
-re "4\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location1\[^\r\n\]*" {
set see4 1
exp_continue
}
-re "5\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location1\[^\r\n\]*" {
set see5 1
exp_continue
}
-re "6\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location2\[^\r\n\]*" {
set see6 1
exp_continue
}
-re ".*$gdb_prompt $" {
if { !$see1 && !$see2 && $see3 && $see4 && $see5 && !$see6 } then {
pass "info break 3-5"
} else {
fail "info break 3-5"
}
}
}
2011-02-27 21:57:16 +01:00
#
# Test disable/enable with arguments
#
# Test with value history
gdb_test "print 1" "" ""
gdb_test "print 2" "" ""
gdb_test "print 3" "" ""
gdb_test "print 4" "" ""
gdb_test "print 5" "" ""
gdb_test "print 6" "" ""
# $2 is 2 and $$ is 5
gdb_test_no_output "disable \$2 \$\$" "disable using history values"
set see1 0
set see2 0
set see3 0
set see4 0
set see5 0
set see6 0
gdb_test_multiple "info break" "check disable with history values" {
-re "1\[\t \]+breakpoint *keep y.* in main at .*:$main_line\[^\r\n\]*" {
set see1 1
exp_continue
}
-re "2\[\t \]+breakpoint *keep n\[^\r\n\]* in marker2 at \[^\r\n\]*" {
set see2 1
exp_continue
}
-re "3\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location7\[^\r\n\]*" {
set see3 1
exp_continue
}
-re "4\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location1\[^\r\n\]*" {
set see4 1
exp_continue
}
-re "5\[\t \]+breakpoint *keep n\[^\r\n\]*$bp_location1\[^\r\n\]*" {
set see5 1
exp_continue
}
-re "6\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location2\[^\r\n\]*" {
set see6 1
exp_continue
}
-re ".*$gdb_prompt $" {
if { $see1 && $see2 && $see3 && $see4 && $see5 && $see6 } then {
pass "check disable with history values"
} else {
fail "check disable with history values"
}
}
}
gdb_test "enable" "" ""
gdb_test "set \$foo = 3" "" ""
gdb_test "set \$bar = 6" "" ""
gdb_test_no_output "disable \$foo \$bar" "disable with convenience values"
set see1 0
set see2 0
set see3 0
set see4 0
set see5 0
set see6 0
gdb_test_multiple "info break" "check disable with convenience values" {
-re "1\[\t \]+breakpoint *keep y.* in main at .*:$main_line\[^\r\n\]*" {
set see1 1
exp_continue
}
-re "2\[\t \]+breakpoint *keep y\[^\r\n\]* in marker2 at \[^\r\n\]*" {
set see2 1
exp_continue
}
-re "3\[\t \]+breakpoint *keep n\[^\r\n\]*$bp_location7\[^\r\n\]*" {
set see3 1
exp_continue
}
-re "4\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location1\[^\r\n\]*" {
set see4 1
exp_continue
}
-re "5\[\t \]+breakpoint *keep y\[^\r\n\]*$bp_location1\[^\r\n\]*" {
set see5 1
exp_continue
}
-re "6\[\t \]+breakpoint *keep n\[^\r\n\]*$bp_location2\[^\r\n\]*" {
set see6 1
exp_continue
}
-re ".*$gdb_prompt $" {
if { $see1 && $see2 && $see3 && $see4 && $see5 && $see6 } then {
pass "check disable with convenience values"
} else {
fail "check disable with convenience values"
}
}
}
# test with bad values
gdb_test "enable" "" ""
gdb_test "disable 10" "No breakpoint number 10." \
"disable non-existent breakpoint 10"
2013-12-06 19:19:01 +01:00
gdb_test_no_output "set \$baz = 1.234"
2011-02-27 21:57:16 +01:00
gdb_test "disable \$baz" \
"Convenience variable must have integer value.*" \
"disable with non-integer convenience var"
gdb_test "disable \$grbx" \
"Convenience variable must have integer value.*" \
"disable with non-existent convenience var"
gdb_test "disable \$10" \
"History has not yet reached .10." \
"disable with non-existent history value"
gdb_test "disable \$1foo" \
"Convenience variable must have integer value.*" \
"disable with badly formed history value"
1999-04-16 03:35:26 +02:00
# FIXME: The rest of this test doesn't work with anything that can't
# handle arguments.
# Huh? There doesn't *appear* to be anything that passes arguments
# below.
#
# run until the breakpoint at main is hit. For non-stubs-using targets.
#
2007-03-27 19:59:38 +02:00
gdb_run_cmd
2014-09-12 23:16:31 +02:00
gdb_test "" \
"Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*" \
"run until function breakpoint"
1999-04-16 03:35:26 +02:00
2012-06-11 21:16:24 +02:00
# Test the 'list' commands sets current file for the 'break LINENO' command.
2014-10-22 11:24:25 +02:00
set bp_marker1 [gdb_get_line_number "set breakpoint 15 here" ${srcfile1}]
2012-06-11 21:16:24 +02:00
gdb_test "list marker1" ".*"
gdb_test "break $bp_marker1" "Breakpoint \[0-9\]+ at 0x\[0-9a-f\]+: file .*${srcfile1}, line ${bp_marker1}\\." \
"break lineno"
gdb_test_no_output {delete $bpnum}
1999-04-16 03:35:26 +02:00
#
# run until the breakpoint at a line number
#
2003-11-13 16:34:39 +01:00
gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location1.*$bp_location1\[\t \]+printf.*factorial.*" \
1999-04-16 03:35:26 +02:00
"run until breakpoint set at a line number"
#
# Run until the breakpoint set in a function in a file
#
for {set i 6} {$i >= 1} {incr i -1} {
2003-11-13 16:34:39 +01:00
gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, factorial \\(value=$i\\) at .*$srcfile:$bp_location7.*$bp_location7\[\t \]+.*if .value > 1. \{.*" \
1999-04-16 03:35:26 +02:00
"run until file:function($i) breakpoint"
}
2002-05-13 03:18:19 +02:00
#
# Run until the breakpoint set at a quoted function
#
2014-10-22 11:24:25 +02:00
gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, (0x\[0-9a-f\]+ in )?marker2 \\(a=43\\) at .*$srcfile1:$bp_location8.*" \
2002-05-13 03:18:19 +02:00
"run until quoted breakpoint"
1999-04-16 03:35:26 +02:00
#
# run until the file:function breakpoint at a line number in a file
#
2003-11-13 16:34:39 +01:00
gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location2.*$bp_location2\[\t \]+argc = \\(argc == 12345\\);.*" \
1999-04-16 03:35:26 +02:00
"run until file:linenum breakpoint"
1999-10-06 01:13:56 +02:00
# Test break at offset +1
2003-11-13 16:34:39 +01:00
set bp_location10 [gdb_get_line_number "set breakpoint 10 here"]
1999-10-06 01:13:56 +02:00
gdb_test "break +1" \
2003-11-13 16:34:39 +01:00
"Breakpoint.*at.* file .*$srcfile, line $bp_location10\\." \
1999-10-06 01:13:56 +02:00
"breakpoint offset +1"
# Check to see if breakpoint is hit when stepped onto
gdb_test "step" \
2003-11-13 16:34:39 +01:00
".*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location10.*$bp_location10\[\t \]+return argc;.*breakpoint 10 here.*" \
1999-10-06 01:13:56 +02:00
"step onto breakpoint"
2006-06-13 10:46:17 +02:00
# Check to see if breakpoint can be set on ending brace of function
set bp_location10a [gdb_get_line_number "set breakpoint 10a here"]
gdb_test "break $bp_location10a" \
"Breakpoint.*at.* file .*$srcfile, line $bp_location10a\\." \
"setting breakpoint at }"
gdb_test "continue" \
".*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location10a.*$bp_location10a\[\t \]+}.*breakpoint 10a here.*" \
"continue to breakpoint at }"
1999-04-16 03:35:26 +02:00
#
# delete all breakpoints so we can start over, course this can be a test too
#
delete_breakpoints
#
# test temporary breakpoint at function
#
2016-12-01 21:41:23 +01:00
gdb_test "tbreak main" "Temporary breakpoint.*at.* file .*$srcfile, line.*" "temporary breakpoint function"
1999-04-16 03:35:26 +02:00
#
# test break at function in file
#
2008-04-15 16:33:55 +02:00
gdb_test "tbreak $srcfile:factorial" "Temporary breakpoint.*at.* file .*$srcfile, line.*" \
1999-04-16 03:35:26 +02:00
"Temporary breakpoint function in file"
#
# test break at line number
#
2010-05-28 01:39:56 +02:00
gdb_test "tbreak $bp_location1" \
"Temporary breakpoint.*at.* file .*$srcfile, line $bp_location1.*" \
2016-12-01 21:44:38 +01:00
"temporary breakpoint line number #1"
1999-04-16 03:35:26 +02:00
2016-12-01 21:41:23 +01:00
gdb_test "tbreak $bp_location6" "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location6.*" "temporary breakpoint line number #2"
1999-04-16 03:35:26 +02:00
#
# test break at line number in file
#
2010-05-28 01:39:56 +02:00
gdb_test "tbreak $srcfile:$bp_location2" \
"Temporary breakpoint.*at.* file .*$srcfile, line $bp_location2.*" \
2016-12-01 21:44:38 +01:00
"temporary breakpoint line number in file #1"
1999-04-16 03:35:26 +02:00
2003-11-13 16:34:39 +01:00
set bp_location11 [gdb_get_line_number "set breakpoint 11 here"]
2008-04-15 16:33:55 +02:00
gdb_test "tbreak $srcfile:$bp_location11" "Temporary breakpoint.*at.* file .*$srcfile, line $bp_location11.*" "Temporary breakpoint line number in file #2"
1999-04-16 03:35:26 +02:00
#
# check to see what breakpoints are set (temporary this time)
#
2008-02-26 09:14:11 +01:00
gdb_test "info break" "Num Type.*Disp Enb Address.*What.*\[\r\n\]
1999-06-28 18:06:02 +02:00
\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$main_line.*\[\r\n\]
2015-12-21 17:23:43 +01:00
\[0-9\]+\[\t \]+breakpoint del.*y.*in factorial at .*$srcfile:$bp_location7.*\[\r\n\]
2003-11-13 16:34:39 +01:00
\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location1.*\[\r\n\]
\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location6.*\[\r\n\]
\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location2.*\[\r\n\]
\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location11.*" \
1999-06-28 18:06:02 +02:00
"Temporary breakpoint info"
1999-04-16 03:35:26 +02:00
#***********
# Verify that catchpoints for fork, vfork and exec don't trigger
# inappropriately. (There are no calls to those system functions
# in this test program.)
#
if ![runto_main] then { fail "break tests suppressed" }
2010-05-28 01:39:56 +02:00
gdb_test "catch" \
"Catch requires an event name." \
"catch requires an event name"
1999-04-16 03:35:26 +02:00
2015-12-21 20:38:51 +01:00
gdb_test "catch fork" "Catchpoint \[0-9\]+ \\(fork\\)" \
"set catch fork, never expected to trigger"
1999-04-16 03:35:26 +02:00
2015-12-21 20:38:51 +01:00
gdb_test "catch vfork" "Catchpoint \[0-9\]+ \\(vfork\\)" \
"set catch vfork, never expected to trigger"
1999-04-16 03:35:26 +02:00
2015-12-21 20:38:51 +01:00
gdb_test "catch exec" "Catchpoint \[0-9\]+ \\(exec\\)" \
"set catch exec, never expected to trigger"
1999-04-16 03:35:26 +02:00
# Verify that GDB responds gracefully when asked to set a breakpoint
# on a nonexistent source line.
#
the "ambiguous linespec" series
gdb
2011-12-06 Joel Brobecker <brobecker@acacore.com>
* language.h (struct language_defn): Add new component
la_symbol_name_compare.
* symfile.h (struct quick_symbol_functions): Update the profile
of parameter "name_matcher" for the expand_symtabs_matching
method. Update the documentation accordingly.
* ada-lang.h (ada_name_for_lookup): Add declaration.
* ada-lang.c (ada_name_for_lookup): New function, extracted out
from ada_iterate_over_symbols.
(ada_iterate_over_symbols): Do not encode symbol name anymore.
(ada_expand_partial_symbol_name): Adjust profile.
(ada_language_defn): Add value for la_symbol_name_compare field.
* linespec.c: #include "ada-lang.h".
(iterate_name_matcher): Add language parameter. Replace call
to strcmp_iw by call to language->la_symbol_name_compare.
(decode_variable): Encode COPY if current language is Ada.
* dwarf2read.c (dw2_expand_symtabs_matching): Adjust profile
of name_matcher parameter. Adjust call to name_matcher.
* psymtab.c (expand_symtabs_matching_via_partial): Likewise.
(expand_partial_symbol_names): Update profile of parameter "fun".
* psymtab.h (expand_partial_symbol_names): Update profile of
parameter "fun".
* symtab.c (demangle_for_lookup): Update function documentation.
(search_symbols_name_matches): Add language parameter.
(expand_partial_symbol_name): Likewise.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Add value for
la_symbol_name_compare field.
* d-lang.c (d_language_defn): Likewise.
* f-lang.c (f_language_defn): Ditto.
* jv-lang.c (java_language_defn): Ditto.
* m2-lang.c (m2_language_defn): Ditto.
* objc-lang.c (objc_language_defn): Ditto.
* opencl-lang.c (opencl_language_defn): Ditto.
* p-lang.c (pascal_language_defn): Ditto.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Ditto.
2011-12-06 Tom Tromey <tromey@redhat.com>
* linespec.c (iterate_over_all_matching_symtabs): Use
LA_ITERATE_OVER_SYMBOLS.
(lookup_prefix_sym, add_matching_symbols_to_info): Likewise.
(find_function_symbols, decode_variable): Remove Ada special
case.
* language.h (struct language_defn) <la_iterate_over_symbols>: New
field.
(LA_ITERATE_OVER_SYMBOLS): New macro.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Update.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* d-lang.c (d_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* jv-lang.c (java_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* p-lang.c (pascal_language_defn): Update.
* ada-lang.c (ada_iterate_over_symbols): New function.
(ada_language_defn): Update.
2011-12-06 Tom Tromey <tromey@redhat.com>
Joel Brobecker <brobecker@acacore.com>
PR breakpoints/13105, PR objc/8341, PR objc/8343, PR objc/8366,
PR objc/8535, PR breakpoints/11657, PR breakpoints/11970,
PR breakpoints/12023, PR breakpoints/12334, PR breakpoints/12856,
PR shlibs/8929, PR shlibs/7393:
* python/py-type.c (compare_maybe_null_strings): Rename from
compare_strings.
(check_types_equal): Update.
* utils.c (compare_strings): New function.
* tui/tui-winsource.c (tui_update_breakpoint_info): Update for
location changes.
* tracepoint.c (scope_info): Update.
(trace_find_line_command): Use DECODE_LINE_FUNFIRSTLINE.
* symtab.h (iterate_over_minimal_symbols)
(iterate_over_some_symtabs, iterate_over_symtabs)
(find_pcs_for_symtab_line, iterate_over_symbols)
(demangle_for_lookup): Declare.
(expand_line_sal): Remove.
* symtab.c (iterate_over_some_symtabs, iterate_over_symtabs)
(lookup_symtab_callback): New functions.
(lookup_symtab): Rewrite.
(demangle_for_lookup): New function, extract from
lookup_symbol_in_language.
(lookup_symbol_in_language): Use it.
(iterate_over_symbols): New function.
(find_line_symtab): Update.
(find_pcs_for_symtab_line): New functions.
(find_line_common): Add 'start' argument.
(decode_line_spec): Update. Change argument to 'flags', change
interpretation.
(append_expanded_sal): Remove.
(append_exact_match_to_sals): Remove.
(expand_line_sal): Remove.
* symfile.h (struct quick_symbol_functions) <lookup_symtab>:
Remove.
<map_symtabs_matching_filename>: New field.
* stack.c (func_command): Only look in the current program space.
Use DECODE_LINE_FUNFIRSTLINE.
* source.c (line_info): Set pspace on sal. Check program space in
the loop. Use DECODE_LINE_LIST_MODE.
(select_source_symtab): Use DECODE_LINE_FUNFIRSTLINE.
* solib-target.c: Remove DEF_VEC_I(CORE_ADDR).
* python/python.c (gdbpy_decode_line): Update.
* psymtab.c (partial_map_expand_apply): New function.
(partial_map_symtabs_matching_filename): Rename from
lookup_partial_symbol. Update arguments.
(lookup_symtab_via_partial_symtab): Remove.
(psym_functions): Update.
* objc-lang.h (parse_selector, parse_method): Don't declare.
(find_imps): Update.
* objc-lang.c (parse_selector, parse_method): Now static.
(find_methods): Change arguments. Fill in a vector of symbol
names.
(uniquify_strings): New function.
(find_imps): Change arguments.
* minsyms.c (iterate_over_minimal_symbols): New function.
* linespec.h (enum decode_line_flags): New.
(struct linespec_sals): New.
(struct linespec_result) <canonical>: Remove.
<pre_expanded, addr_string, sals>: New fields.
(destroy_linespec_result, make_cleanup_destroy_linespec_result)
(decode_line_full): Declare.
(decode_line_1): Update.
* linespec.c (struct address_entry, struct linespec_state, struct
collect_info): New types.
(add_sal_to_sals_basic, add_sal_to_sals, hash_address_entry)
(eq_address_entry, maybe_add_address): New functions.
(total_number_of_methods): Remove.
(iterate_name_matcher, iterate_over_all_matching_symtabs): New
functions.
(find_methods): Change arguments. Don't canonicalize input.
Simplify logic.
(add_matching_methods, add_constructors)
(build_canonical_line_spec): Remove.
(filter_results, convert_results_to_lsals): New functions.
(decode_line_2): Change arguments. Rewrite for new data
structures.
(decode_line_internal): Rename from decode_line_1. Change
arguments. Add cleanups. Update for new data structures.
(linespec_state_constructor, linespec_state_destructor)
(decode_line_full, decode_line_1): New functions.
(decode_indirect): Change arguments. Update.
(locate_first_half): Use skip_spaces.
(decode_objc): Change arguments. Update for new data structures.
Simplify logic.
(decode_compound): Change arguments. Add cleanups. Remove
fallback code, replace with error.
(struct decode_compound_collector): New type.
(collect_one_symbol): New function.
(lookup_prefix_sym): Change arguments. Update.
(compare_symbol_name, add_all_symbol_names_from_pspace)
(find_superclass_methods ): New functions.
(find_method): Rewrite.
(struct symtab_collector): New type.
(add_symtabs_to_list, collect_symtabs_from_filename): New
functions.
(symtabs_from_filename): Change API. Rename from
symtab_from_filename.
(collect_function_symbols): New function.
(find_function_symbols): Change API. Rename from
find_function_symbol. Rewrite.
(decode_all_digits): Change arguments. Rewrite.
(decode_dollar): Change arguments. Use decode_variable.
(decode_label): Change arguments. Rewrite.
(collect_symbols): New function.
(minsym_found): Change arguments. Rewrite.
(check_minsym, search_minsyms_for_name)
(add_matching_symbols_to_info): New function.
(decode_variable): Change arguments. Iterate over all symbols.
(symbol_found): Remove.
(symbol_to_sal): New function.
(init_linespec_result, destroy_linespec_result)
(cleanup_linespec_result, make_cleanup_destroy_linespec_result):
New functions.
(decode_digits_list_mode, decode_digits_ordinary): New functions.
* dwarf2read.c (dw2_map_expand_apply): New function.
(dw2_map_symtabs_matching_filename): Rename from
dw2_lookup_symtab. Change arguments.
(dwarf2_gdb_index_functions): Update.
* dwarf2loc.c: Remove DEF_VEC_I(CORE_ADDR).
* defs.h (compare_strings): Declare.
* cli/cli-cmds.c (compare_strings): Move to utils.c.
(edit_command, list_command): Use DECODE_LINE_LIST_MODE. Call
filter_sals.
(compare_symtabs, filter_sals): New functions.
* breakpoint.h (struct bp_location) <line_number, source_file>:
New fields.
(struct breakpoint) <line_number, source_file>: Remove.
<filter>: New field.
* breakpoint.c (print_breakpoint_location, init_raw_breakpoint)
(momentary_breakpoint_from_master, add_location_to_breakpoint):
Update for changes to locations.
(init_breakpoint_sal): Add 'filter' argument. Set 'filter' on
breakpoint.
(create_breakpoint_sal): Add 'filter' argument.
(remove_sal, expand_line_sal_maybe): Remove.
(create_breakpoints_sal): Remove 'sals' argument. Handle
pre-expanded sals and the filter.
(parse_breakpoint_sals): Use decode_line_full.
(check_fast_tracepoint_sals): Use get_sal_arch.
(create_breakpoint): Create a linespec_sals. Update.
(break_range_command): Use decode_line_full. Update.
(until_break_command): Update.
(clear_command): Update match conditions for linespec.c changes.
Use DECODE_LINE_LIST_MODE.
(say_where): Update for changes to locations.
(bp_location_dtor): Free 'source_file'.
(base_breakpoint_dtor): Free 'filter'. Don't free 'source_file'.
(update_static_tracepoint): Update for changes to locations.
(update_breakpoint_locations): Disable ranged breakpoint if too
many locations match. Update.
(addr_string_to_sals): Use decode_line_full. Resolve all sal
PCs.
(breakpoint_re_set_default): Don't call expand_line_sal_maybe.
(decode_line_spec_1): Update. Change argument name to 'flags',
change interpretation.
* block.h (block_containing_function): Declare.
* block.c (block_containing_function): New function.
* skip.c (skip_function_command): Update.
(skip_re_set): Update.
* infcmd.c (jump_command): Use DECODE_LINE_FUNFIRSTLINE.
* mi/mi-main.c (mi_cmd_trace_find): Use DECODE_LINE_FUNFIRSTLINE.
* NEWS: Add entry.
2011-12-06 Tom Tromey <tromey@redhat.com>
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Allow
breakpoint's pspace to be NULL.
* breakpoint.h (struct breakpoint) <pspace>: Update comment.
* breakpoint.c (init_raw_breakpoint): Conditionally set
breakpoint's pspace.
(init_breakpoint_sal): Don't set breakpoint's pspace.
(prepare_re_set_context): Conditionally switch program space.
(addr_string_to_sals): Check executing_startup on location's
program space.
2011-12-06 Tom Tromey <tromey@redhat.com>
* breakpoint.h (enum enable_state) <bp_startup_disabled>: Remove.
* breakpoint.c (should_be_inserted): Explicitly check if program
space is executing startup.
(describe_other_breakpoints): Update.
(disable_breakpoints_before_startup): Change executing_startup
earlier. Remove loop.
(enable_breakpoints_after_startup): Likewise.
(init_breakpoint_sal): Don't use bp_startup_disabled.
(create_breakpoint): Don't use bp_startup_disabled.
(update_global_location_list): Use should_be_inserted.
(bkpt_re_set): Update.
gdb/testsuite
2011-12-06 Joel Brobecker <brobecker@acacore.com>
* gdb.ada/fullname_bp.exp: Add tests for other valid linespecs
involving a fully qualified function name.
2011-12-06 Tom Tromey <tromey@redhat.com>
* gdb.ada/homonym.exp: Add three breakpoint tests.
2011-12-06 Tom Tromey <tromey@redhat.com>
* gdb.base/solib-weak.exp (do_test): Remove kfail.
* gdb.trace/tracecmd.exp: Disable pending breakpoints earlier.
* gdb.objc/objcdecode.exp: Update for output changes.
* gdb.linespec/linespec.exp: New file.
* gdb.linespec/lspec.cc: New file.
* gdb.linespec/lspec.h: New file.
* gdb.linespec/body.h: New file.
* gdb.linespec/base/two/thefile.cc: New file.
* gdb.linespec/base/one/thefile.cc: New file.
* gdb.linespec/Makefile.in: New file.
* gdb.cp/templates.exp (test_template_breakpoints): Update for
output changes.
* gdb.cp/re-set-overloaded.exp: Remove kfail.
* gdb.cp/ovldbreak.exp: Update for output changes. "all" test now
makes one breakpoint.
* gdb.cp/method2.exp (test_break): Update for output changes.
* gdb.cp/mb-templates.exp: Update for output changes.
* gdb.cp/mb-inline.exp: Update for output changes.
* gdb.cp/mb-ctor.exp: Update for output changes.
* gdb.cp/ovsrch.exp: Use fully-qualified names.
* gdb.base/solib-symbol.exp: Run to main later. Breakpoint now
has multiple matches.
* gdb.base/sepdebug.exp: Disable pending breakpoints. Update for
error message change.
* gdb.base/list.exp (test_list_filename_and_number): Update for
error message change.
* gdb.base/break.exp: Disable pending breakpoints. Update for
output changes.
* configure.ac: Add gdb.linespec.
* configure: Rebuild.
* Makefile.in (ALL_SUBDIRS): Add gdb.linespec.
gdb/doc
2011-12-06 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Set Breaks): Update for new behavior.
2011-12-06 19:54:43 +01:00
gdb_test_no_output "set breakpoint pending off"
2010-05-28 01:39:56 +02:00
gdb_test "break 999" \
the "ambiguous linespec" series
gdb
2011-12-06 Joel Brobecker <brobecker@acacore.com>
* language.h (struct language_defn): Add new component
la_symbol_name_compare.
* symfile.h (struct quick_symbol_functions): Update the profile
of parameter "name_matcher" for the expand_symtabs_matching
method. Update the documentation accordingly.
* ada-lang.h (ada_name_for_lookup): Add declaration.
* ada-lang.c (ada_name_for_lookup): New function, extracted out
from ada_iterate_over_symbols.
(ada_iterate_over_symbols): Do not encode symbol name anymore.
(ada_expand_partial_symbol_name): Adjust profile.
(ada_language_defn): Add value for la_symbol_name_compare field.
* linespec.c: #include "ada-lang.h".
(iterate_name_matcher): Add language parameter. Replace call
to strcmp_iw by call to language->la_symbol_name_compare.
(decode_variable): Encode COPY if current language is Ada.
* dwarf2read.c (dw2_expand_symtabs_matching): Adjust profile
of name_matcher parameter. Adjust call to name_matcher.
* psymtab.c (expand_symtabs_matching_via_partial): Likewise.
(expand_partial_symbol_names): Update profile of parameter "fun".
* psymtab.h (expand_partial_symbol_names): Update profile of
parameter "fun".
* symtab.c (demangle_for_lookup): Update function documentation.
(search_symbols_name_matches): Add language parameter.
(expand_partial_symbol_name): Likewise.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Add value for
la_symbol_name_compare field.
* d-lang.c (d_language_defn): Likewise.
* f-lang.c (f_language_defn): Ditto.
* jv-lang.c (java_language_defn): Ditto.
* m2-lang.c (m2_language_defn): Ditto.
* objc-lang.c (objc_language_defn): Ditto.
* opencl-lang.c (opencl_language_defn): Ditto.
* p-lang.c (pascal_language_defn): Ditto.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Ditto.
2011-12-06 Tom Tromey <tromey@redhat.com>
* linespec.c (iterate_over_all_matching_symtabs): Use
LA_ITERATE_OVER_SYMBOLS.
(lookup_prefix_sym, add_matching_symbols_to_info): Likewise.
(find_function_symbols, decode_variable): Remove Ada special
case.
* language.h (struct language_defn) <la_iterate_over_symbols>: New
field.
(LA_ITERATE_OVER_SYMBOLS): New macro.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Update.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* d-lang.c (d_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* jv-lang.c (java_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* p-lang.c (pascal_language_defn): Update.
* ada-lang.c (ada_iterate_over_symbols): New function.
(ada_language_defn): Update.
2011-12-06 Tom Tromey <tromey@redhat.com>
Joel Brobecker <brobecker@acacore.com>
PR breakpoints/13105, PR objc/8341, PR objc/8343, PR objc/8366,
PR objc/8535, PR breakpoints/11657, PR breakpoints/11970,
PR breakpoints/12023, PR breakpoints/12334, PR breakpoints/12856,
PR shlibs/8929, PR shlibs/7393:
* python/py-type.c (compare_maybe_null_strings): Rename from
compare_strings.
(check_types_equal): Update.
* utils.c (compare_strings): New function.
* tui/tui-winsource.c (tui_update_breakpoint_info): Update for
location changes.
* tracepoint.c (scope_info): Update.
(trace_find_line_command): Use DECODE_LINE_FUNFIRSTLINE.
* symtab.h (iterate_over_minimal_symbols)
(iterate_over_some_symtabs, iterate_over_symtabs)
(find_pcs_for_symtab_line, iterate_over_symbols)
(demangle_for_lookup): Declare.
(expand_line_sal): Remove.
* symtab.c (iterate_over_some_symtabs, iterate_over_symtabs)
(lookup_symtab_callback): New functions.
(lookup_symtab): Rewrite.
(demangle_for_lookup): New function, extract from
lookup_symbol_in_language.
(lookup_symbol_in_language): Use it.
(iterate_over_symbols): New function.
(find_line_symtab): Update.
(find_pcs_for_symtab_line): New functions.
(find_line_common): Add 'start' argument.
(decode_line_spec): Update. Change argument to 'flags', change
interpretation.
(append_expanded_sal): Remove.
(append_exact_match_to_sals): Remove.
(expand_line_sal): Remove.
* symfile.h (struct quick_symbol_functions) <lookup_symtab>:
Remove.
<map_symtabs_matching_filename>: New field.
* stack.c (func_command): Only look in the current program space.
Use DECODE_LINE_FUNFIRSTLINE.
* source.c (line_info): Set pspace on sal. Check program space in
the loop. Use DECODE_LINE_LIST_MODE.
(select_source_symtab): Use DECODE_LINE_FUNFIRSTLINE.
* solib-target.c: Remove DEF_VEC_I(CORE_ADDR).
* python/python.c (gdbpy_decode_line): Update.
* psymtab.c (partial_map_expand_apply): New function.
(partial_map_symtabs_matching_filename): Rename from
lookup_partial_symbol. Update arguments.
(lookup_symtab_via_partial_symtab): Remove.
(psym_functions): Update.
* objc-lang.h (parse_selector, parse_method): Don't declare.
(find_imps): Update.
* objc-lang.c (parse_selector, parse_method): Now static.
(find_methods): Change arguments. Fill in a vector of symbol
names.
(uniquify_strings): New function.
(find_imps): Change arguments.
* minsyms.c (iterate_over_minimal_symbols): New function.
* linespec.h (enum decode_line_flags): New.
(struct linespec_sals): New.
(struct linespec_result) <canonical>: Remove.
<pre_expanded, addr_string, sals>: New fields.
(destroy_linespec_result, make_cleanup_destroy_linespec_result)
(decode_line_full): Declare.
(decode_line_1): Update.
* linespec.c (struct address_entry, struct linespec_state, struct
collect_info): New types.
(add_sal_to_sals_basic, add_sal_to_sals, hash_address_entry)
(eq_address_entry, maybe_add_address): New functions.
(total_number_of_methods): Remove.
(iterate_name_matcher, iterate_over_all_matching_symtabs): New
functions.
(find_methods): Change arguments. Don't canonicalize input.
Simplify logic.
(add_matching_methods, add_constructors)
(build_canonical_line_spec): Remove.
(filter_results, convert_results_to_lsals): New functions.
(decode_line_2): Change arguments. Rewrite for new data
structures.
(decode_line_internal): Rename from decode_line_1. Change
arguments. Add cleanups. Update for new data structures.
(linespec_state_constructor, linespec_state_destructor)
(decode_line_full, decode_line_1): New functions.
(decode_indirect): Change arguments. Update.
(locate_first_half): Use skip_spaces.
(decode_objc): Change arguments. Update for new data structures.
Simplify logic.
(decode_compound): Change arguments. Add cleanups. Remove
fallback code, replace with error.
(struct decode_compound_collector): New type.
(collect_one_symbol): New function.
(lookup_prefix_sym): Change arguments. Update.
(compare_symbol_name, add_all_symbol_names_from_pspace)
(find_superclass_methods ): New functions.
(find_method): Rewrite.
(struct symtab_collector): New type.
(add_symtabs_to_list, collect_symtabs_from_filename): New
functions.
(symtabs_from_filename): Change API. Rename from
symtab_from_filename.
(collect_function_symbols): New function.
(find_function_symbols): Change API. Rename from
find_function_symbol. Rewrite.
(decode_all_digits): Change arguments. Rewrite.
(decode_dollar): Change arguments. Use decode_variable.
(decode_label): Change arguments. Rewrite.
(collect_symbols): New function.
(minsym_found): Change arguments. Rewrite.
(check_minsym, search_minsyms_for_name)
(add_matching_symbols_to_info): New function.
(decode_variable): Change arguments. Iterate over all symbols.
(symbol_found): Remove.
(symbol_to_sal): New function.
(init_linespec_result, destroy_linespec_result)
(cleanup_linespec_result, make_cleanup_destroy_linespec_result):
New functions.
(decode_digits_list_mode, decode_digits_ordinary): New functions.
* dwarf2read.c (dw2_map_expand_apply): New function.
(dw2_map_symtabs_matching_filename): Rename from
dw2_lookup_symtab. Change arguments.
(dwarf2_gdb_index_functions): Update.
* dwarf2loc.c: Remove DEF_VEC_I(CORE_ADDR).
* defs.h (compare_strings): Declare.
* cli/cli-cmds.c (compare_strings): Move to utils.c.
(edit_command, list_command): Use DECODE_LINE_LIST_MODE. Call
filter_sals.
(compare_symtabs, filter_sals): New functions.
* breakpoint.h (struct bp_location) <line_number, source_file>:
New fields.
(struct breakpoint) <line_number, source_file>: Remove.
<filter>: New field.
* breakpoint.c (print_breakpoint_location, init_raw_breakpoint)
(momentary_breakpoint_from_master, add_location_to_breakpoint):
Update for changes to locations.
(init_breakpoint_sal): Add 'filter' argument. Set 'filter' on
breakpoint.
(create_breakpoint_sal): Add 'filter' argument.
(remove_sal, expand_line_sal_maybe): Remove.
(create_breakpoints_sal): Remove 'sals' argument. Handle
pre-expanded sals and the filter.
(parse_breakpoint_sals): Use decode_line_full.
(check_fast_tracepoint_sals): Use get_sal_arch.
(create_breakpoint): Create a linespec_sals. Update.
(break_range_command): Use decode_line_full. Update.
(until_break_command): Update.
(clear_command): Update match conditions for linespec.c changes.
Use DECODE_LINE_LIST_MODE.
(say_where): Update for changes to locations.
(bp_location_dtor): Free 'source_file'.
(base_breakpoint_dtor): Free 'filter'. Don't free 'source_file'.
(update_static_tracepoint): Update for changes to locations.
(update_breakpoint_locations): Disable ranged breakpoint if too
many locations match. Update.
(addr_string_to_sals): Use decode_line_full. Resolve all sal
PCs.
(breakpoint_re_set_default): Don't call expand_line_sal_maybe.
(decode_line_spec_1): Update. Change argument name to 'flags',
change interpretation.
* block.h (block_containing_function): Declare.
* block.c (block_containing_function): New function.
* skip.c (skip_function_command): Update.
(skip_re_set): Update.
* infcmd.c (jump_command): Use DECODE_LINE_FUNFIRSTLINE.
* mi/mi-main.c (mi_cmd_trace_find): Use DECODE_LINE_FUNFIRSTLINE.
* NEWS: Add entry.
2011-12-06 Tom Tromey <tromey@redhat.com>
* elfread.c (elf_gnu_ifunc_resolver_return_stop): Allow
breakpoint's pspace to be NULL.
* breakpoint.h (struct breakpoint) <pspace>: Update comment.
* breakpoint.c (init_raw_breakpoint): Conditionally set
breakpoint's pspace.
(init_breakpoint_sal): Don't set breakpoint's pspace.
(prepare_re_set_context): Conditionally switch program space.
(addr_string_to_sals): Check executing_startup on location's
program space.
2011-12-06 Tom Tromey <tromey@redhat.com>
* breakpoint.h (enum enable_state) <bp_startup_disabled>: Remove.
* breakpoint.c (should_be_inserted): Explicitly check if program
space is executing startup.
(describe_other_breakpoints): Update.
(disable_breakpoints_before_startup): Change executing_startup
earlier. Remove loop.
(enable_breakpoints_after_startup): Likewise.
(init_breakpoint_sal): Don't use bp_startup_disabled.
(create_breakpoint): Don't use bp_startup_disabled.
(update_global_location_list): Use should_be_inserted.
(bkpt_re_set): Update.
gdb/testsuite
2011-12-06 Joel Brobecker <brobecker@acacore.com>
* gdb.ada/fullname_bp.exp: Add tests for other valid linespecs
involving a fully qualified function name.
2011-12-06 Tom Tromey <tromey@redhat.com>
* gdb.ada/homonym.exp: Add three breakpoint tests.
2011-12-06 Tom Tromey <tromey@redhat.com>
* gdb.base/solib-weak.exp (do_test): Remove kfail.
* gdb.trace/tracecmd.exp: Disable pending breakpoints earlier.
* gdb.objc/objcdecode.exp: Update for output changes.
* gdb.linespec/linespec.exp: New file.
* gdb.linespec/lspec.cc: New file.
* gdb.linespec/lspec.h: New file.
* gdb.linespec/body.h: New file.
* gdb.linespec/base/two/thefile.cc: New file.
* gdb.linespec/base/one/thefile.cc: New file.
* gdb.linespec/Makefile.in: New file.
* gdb.cp/templates.exp (test_template_breakpoints): Update for
output changes.
* gdb.cp/re-set-overloaded.exp: Remove kfail.
* gdb.cp/ovldbreak.exp: Update for output changes. "all" test now
makes one breakpoint.
* gdb.cp/method2.exp (test_break): Update for output changes.
* gdb.cp/mb-templates.exp: Update for output changes.
* gdb.cp/mb-inline.exp: Update for output changes.
* gdb.cp/mb-ctor.exp: Update for output changes.
* gdb.cp/ovsrch.exp: Use fully-qualified names.
* gdb.base/solib-symbol.exp: Run to main later. Breakpoint now
has multiple matches.
* gdb.base/sepdebug.exp: Disable pending breakpoints. Update for
error message change.
* gdb.base/list.exp (test_list_filename_and_number): Update for
error message change.
* gdb.base/break.exp: Disable pending breakpoints. Update for
output changes.
* configure.ac: Add gdb.linespec.
* configure: Rebuild.
* Makefile.in (ALL_SUBDIRS): Add gdb.linespec.
gdb/doc
2011-12-06 Tom Tromey <tromey@redhat.com>
* gdb.texinfo (Set Breaks): Update for new behavior.
2011-12-06 19:54:43 +01:00
"No line 999 in the current file." \
2010-05-28 01:39:56 +02:00
"break on non-existent source line"
1999-04-16 03:35:26 +02:00
2003-01-16 02:56:16 +01:00
# Run to the desired default location. If not positioned here, the
# tests below don't work.
#
2010-05-28 01:39:56 +02:00
gdb_test "until $bp_location1" "main .* at .*:$bp_location1.*" \
"until bp_location1"
2003-01-16 02:56:16 +01:00
1999-04-16 03:35:26 +02:00
# Verify that GDB allows one to just say "break", which is treated
# as the "default" breakpoint. Note that GDB gets cute when printing
# the informational message about other breakpoints at the same
# location. We'll hit that bird with this stone too.
#
2010-05-28 01:39:56 +02:00
gdb_test "break" "Breakpoint \[0-9\]*.*" \
"break on default location, 1st time"
1999-04-16 03:35:26 +02:00
2010-05-28 01:39:56 +02:00
gdb_test "break" \
"Note: breakpoint \[0-9\]* also set at .*Breakpoint \[0-9\]*.*" \
"break on default location, 2nd time"
1999-04-16 03:35:26 +02:00
2010-05-28 01:39:56 +02:00
gdb_test "break" \
"Note: breakpoints \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*" \
"break on default location, 3rd time"
1999-04-16 03:35:26 +02:00
2010-05-28 01:39:56 +02:00
gdb_test "break" \
"Note: breakpoints \[0-9\]*, \[0-9\]* and \[0-9\]* also set at .*Breakpoint \[0-9\]*.*" \
"break on default location, 4th time"
1999-04-16 03:35:26 +02:00
# Verify that a "silent" breakpoint can be set, and that GDB is indeed
# "silent" about its triggering.
#
if ![runto_main] then { fail "break tests suppressed" }
2010-05-28 01:39:56 +02:00
gdb_test_multiple "break $bp_location1" \
"set to-be-silent break bp_location1" {
-re "Breakpoint (\[0-9\]*) at .*, line $bp_location1.*$gdb_prompt $" {
pass "set to-be-silent break bp_location1"
}
}
1999-04-16 03:35:26 +02:00
2011-12-26 12:24:55 +01:00
gdb_test "commands $expect_out(1,string)\nsilent\nend" ">end" "set silent break bp_location1"
1999-04-16 03:35:26 +02:00
2010-05-28 01:39:56 +02:00
gdb_test "info break $expect_out(1,string)" \
"\[0-9\]*\[ \t\]*breakpoint.*:$bp_location1\r\n\[ \t\]*silent.*" \
"info silent break bp_location1"
gdb_test "continue" "Continuing." \
"hit silent break bp_location1"
gdb_test "bt" "#0 main .* at .*:$bp_location1.*" \
"stopped for silent break bp_location1"
1999-04-16 03:35:26 +02:00
# Verify that GDB can at least parse a breakpoint with the
# "thread" keyword. (We won't attempt to test here that a
# thread-specific breakpoint really triggers appropriately.
# The gdb.threads subdirectory contains tests for that.)
#
2003-11-13 16:34:39 +01:00
set bp_location12 [gdb_get_line_number "set breakpoint 12 here"]
2010-05-28 01:39:56 +02:00
gdb_test "break $bp_location12 thread 999" "Unknown thread 999.*" \
"thread-specific breakpoint on non-existent thread disallowed"
gdb_test "break $bp_location12 thread foo" \
Per-inferior/Inferior-qualified thread IDs
This commit changes GDB to track thread numbers per-inferior. Then,
if you're debugging multiple inferiors, GDB displays
"inferior-num.thread-num" instead of just "thread-num" whenever it
needs to display a thread:
(gdb) info inferiors
Num Description Executable
1 process 6022 /home/pedro/gdb/tests/threads
* 2 process 6037 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
1.1 Thread 0x7ffff7fc2740 (LWP 6022) "threads" (running)
1.2 Thread 0x7ffff77c0700 (LWP 6028) "threads" (running)
1.3 Thread 0x7ffff7fc2740 (LWP 6032) "threads" (running)
2.1 Thread 0x7ffff7fc1700 (LWP 6037) "threads" (running)
2.2 Thread 0x7ffff77c0700 (LWP 6038) "threads" (running)
* 2.3 Thread 0x7ffff7fc2740 (LWP 6039) "threads" (running)
(gdb)
...
(gdb) thread 1.1
[Switching to thread 1.1 (Thread 0x7ffff7fc2740 (LWP 8155))]
(gdb)
...
etc.
You can still use "thread NUM", in which case GDB infers you're
referring to thread NUM of the current inferior.
The $_thread convenience var and Python's InferiorThread.num attribute
are remapped to the new per-inferior thread number. It's a backward
compatibility break, but since it only matters when debugging multiple
inferiors, I think it's worth doing.
Because MI thread IDs need to be a single integer, we keep giving
threads a global identifier, _in addition_ to the per-inferior number,
and make MI always refer to the global thread IDs. IOW, nothing
changes from a MI frontend's perspective.
Similarly, since Python's Breakpoint.thread and Guile's
breakpoint-thread/set-breakpoint-thread breakpoint methods need to
work with integers, those are adjusted to work with global thread IDs
too. Follow up patches will provide convenient means to access
threads' global IDs.
To avoid potencially confusing users (which also avoids updating much
of the testsuite), if there's only one inferior and its ID is "1",
IOW, the user hasn't done anything multi-process/inferior related,
then the "INF." part of thread IDs is not shown. E.g,.:
(gdb) info inferiors
Num Description Executable
* 1 process 15275 /home/pedro/gdb/tests/threads
(gdb) info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb) add-inferior
Added inferior 2
(gdb) info threads
Id Target Id Frame
* 1.1 Thread 0x7ffff7fc1740 (LWP 15275) "threads" main () at threads.c:40
(gdb)
No regressions on x86_64 Fedora 20.
gdb/ChangeLog:
2016-01-13 Pedro Alves <palves@redhat.com>
* NEWS: Mention that thread IDs are now per inferior and global
thread IDs.
* Makefile.in (SFILES): Add tid-parse.c.
(COMMON_OBS): Add tid-parse.o.
(HFILES_NO_SRCDIR): Add tid-parse.h.
* ada-tasks.c: Adjust to use ptid_to_global_thread_id.
* breakpoint.c (insert_breakpoint_locations)
(remove_threaded_breakpoints, bpstat_check_breakpoint_conditions)
(print_one_breakpoint_location, set_longjmp_breakpoint)
(check_longjmp_breakpoint_for_call_dummy)
(set_momentary_breakpoint): Adjust to use global IDs.
(find_condition_and_thread, watch_command_1): Use parse_thread_id.
(until_break_command, longjmp_bkpt_dtor)
(breakpoint_re_set_thread, insert_single_step_breakpoint): Adjust
to use global IDs.
* dummy-frame.c (pop_dummy_frame_bpt): Adjust to use
ptid_to_global_thread_id.
* elfread.c (elf_gnu_ifunc_resolver_stop): Likewise.
* gdbthread.h (struct thread_info): Rename field 'num' to
'global_num. Add new fields 'per_inf_num' and 'inf'.
(thread_id_to_pid): Rename thread_id_to_pid to
global_thread_id_to_ptid.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(find_thread_id): Rename to ...
(find_thread_global_id): ... this.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR): Declare.
(print_thread_info): Add comment.
* tid-parse.h: New file.
* tid-parse.c: New file.
* infcmd.c (step_command_fsm_prepare)
(step_command_fsm_should_stop): Adjust to use the global thread
ID.
(until_next_command, until_next_command)
(finish_command_fsm_should_stop): Adjust to use the global thread
ID.
(attach_post_wait): Adjust to check the inferior number too.
* inferior.h (struct inferior) <highest_thread_num>: New field.
* infrun.c (handle_signal_stop)
(insert_exception_resume_breakpoint)
(insert_exception_resume_from_probe): Adjust to use the global
thread ID.
* record-btrace.c (record_btrace_open): Use global thread IDs.
* remote.c (process_initial_stop_replies): Also consider the
inferior number.
* target.c (target_pre_inferior): Clear the inferior's highest
thread num.
* thread.c (clear_thread_inferior_resources): Adjust to use the
global thread ID.
(new_thread): New inferior parameter. Adjust to use it. Set both
the thread's global ID and the thread's per-inferior ID.
(add_thread_silent): Adjust.
(find_thread_global_id): New.
(find_thread_id): Make static. Adjust to rename.
(valid_thread_id): Rename to ...
(valid_global_thread_id): ... this.
(pid_to_thread_id): Rename to ...
(ptid_to_global_thread_id): ... this.
(thread_id_to_pid): Rename to ...
(global_thread_id_to_ptid): ... this. Adjust.
(first_thread_of_process): Adjust.
(do_captured_list_thread_ids): Adjust to use global thread IDs.
(should_print_thread): New function.
(print_thread_info): Rename to ...
(print_thread_info_1): ... this, and add new show_global_ids
parameter. Handle it. Iterate over inferiors.
(print_thread_info): Reimplement as wrapper around
print_thread_info_1.
(show_inferior_qualified_tids): New function.
(print_thread_id): Use it.
(tp_array_compar): Compare inferior numbers too.
(thread_apply_command): Use tid_range_parser.
(do_captured_thread_select): Use parse_thread_id.
(thread_id_make_value): Adjust.
(_initialize_thread): Adjust "info threads" help string.
* varobj.c (struct varobj_root): Update comment.
(varobj_create): Adjust to use global thread IDs.
(value_of_root_1): Adjust to use global_thread_id_to_ptid.
* windows-tdep.c (display_tib): No longer accept an argument.
* cli/cli-utils.c (get_number_trailer): Make extern.
* cli/cli-utils.h (get_number_trailer): Declare.
(get_number_const): Adjust documentation.
* mi/mi-cmd-var.c (mi_cmd_var_update_iter): Adjust to use global
thread IDs.
* mi/mi-interp.c (mi_new_thread, mi_thread_exit)
(mi_on_normal_stop, mi_output_running_pid, mi_on_resume):
* mi/mi-main.c (mi_execute_command, mi_cmd_execute): Likewise.
* guile/scm-breakpoint.c (gdbscm_set_breakpoint_thread_x):
Likewise.
* python/py-breakpoint.c (bppy_set_thread): Likewise.
* python/py-finishbreakpoint.c (bpfinishpy_init): Likewise.
* python/py-infthread.c (thpy_get_num): Add comment and return the
per-inferior thread ID.
(thread_object_getset): Update comment of "num".
gdb/testsuite/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.base/break.exp: Adjust to output changes.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/watch_thread_num.exp: Likewise.
* gdb.linespec/keywords.exp: Likewise.
* gdb.multi/info-threads.exp: Likewise.
* gdb.threads/thread-find.exp: Likewise.
* gdb.multi/tids.c: New file.
* gdb.multi/tids.exp: New file.
gdb/doc/ChangeLog:
2016-01-07 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Threads): Document per-inferior thread IDs,
qualified thread IDs, global thread IDs and thread ID lists.
(Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to
thread IDs.
(Convenience Vars): Document the $_thread convenience variable.
(Ada Tasks): Adjust to refer to thread IDs.
(GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking
Commands, GDB/MI Variable Objects): Update to mention global
thread IDs.
* guile.texi (Breakpoints In Guile)
<breakpoint-thread/set-breakpoint-thread breakpoint>: Mention
global thread IDs instead of thread IDs.
* python.texi (Threads In Python): Adjust documentation of
InferiorThread.num.
(Breakpoint.thread): Mention global thread IDs instead of thread
IDs.
2016-01-13 11:56:07 +01:00
"Invalid thread ID: foo" \
2010-05-28 01:39:56 +02:00
"thread-specific breakpoint on bogus thread ID disallowed"
1999-04-16 03:35:26 +02:00
# Verify that GDB responds gracefully to a breakpoint command with
# trailing garbage.
#
2010-05-28 01:39:56 +02:00
gdb_test "break $bp_location12 foo" \
2012-04-05 20:50:29 +02:00
"malformed linespec error: unexpected string, \"foo\".*" \
2010-05-28 01:39:56 +02:00
"breakpoint with trailing garbage disallowed"
1999-04-16 03:35:26 +02:00
# Verify that GDB responds gracefully to a "clear" command that has
# no matching breakpoint. (First, get us off the current source line,
# which we know has a breakpoint.)
#
2010-05-28 01:39:56 +02:00
gdb_test "next" "marker1.*" "step over breakpoint"
gdb_test "clear 81" "No breakpoint at 81.*" \
"clear line has no breakpoint disallowed"
gdb_test "clear" "No breakpoint at this line.*" \
"clear current line has no breakpoint disallowed"
1999-04-16 03:35:26 +02:00
2000-12-09 23:35:05 +01:00
# Verify that we can set and clear multiple breakpoints.
#
# We don't test that it deletes the correct breakpoints. We do at
# least test that it deletes more than one breakpoint.
#
gdb_test "break marker3" "Breakpoint.*at.*" "break marker3 #1"
gdb_test "break marker3" "Breakpoint.*at.*" "break marker3 #2"
gdb_test "clear marker3" {Deleted breakpoints [0-9]+ [0-9]+.*}
1999-04-16 03:35:26 +02:00
# Verify that a breakpoint can be set via a convenience variable.
#
2010-05-28 01:39:56 +02:00
gdb_test_no_output "set \$foo=$bp_location11" \
"set convenience variable \$foo to bp_location11"
gdb_test "break \$foo" \
"Breakpoint (\[0-9\]*) at .*, line $bp_location11.*" \
"set breakpoint via convenience variable"
1999-04-16 03:35:26 +02:00
# Verify that GDB responds gracefully to an attempt to set a
# breakpoint via a convenience variable whose type is not integer.
#
2010-05-28 01:39:56 +02:00
gdb_test_no_output "set \$foo=81.5" \
"set convenience variable \$foo to 81.5"
gdb_test "break \$foo" \
"Convenience variables used in line specs must have integer values.*" \
"set breakpoint via non-integer convenience variable disallowed"
1999-04-16 03:35:26 +02:00
# Verify that we can set and trigger a breakpoint in a user-called function.
#
2010-05-28 01:39:56 +02:00
gdb_test "break marker2" \
2014-10-22 11:24:25 +02:00
"Breakpoint (\[0-9\]*) at .*, line $bp_location8.*" \
2010-05-28 01:39:56 +02:00
"set breakpoint on to-be-called function"
gdb_test "print marker2(99)" \
2015-12-21 17:23:43 +01:00
"The program being debugged stopped while in a function called from GDB.\r\nEvaluation of the expression containing the function\r\n.marker2. will be abandoned.\r\nWhen the function is done executing, GDB will silently stop.*" \
2010-05-28 01:39:56 +02:00
"hit breakpoint on called function"
1999-04-16 03:35:26 +02:00
# As long as we're stopped (breakpointed) in a called function,
# verify that we can successfully backtrace & such from here.
2015-12-21 18:51:54 +01:00
gdb_test "bt" \
"#0\[ \t\]*($hex in )?marker2.*:$bp_location8\r\n#1\[ \t\]*<function called from gdb>.*" \
"backtrace while in called function"
2000-11-17 17:24:48 +01:00
# Return from the called function. For remote targets, it's important to do
# this before runto_main, which otherwise may silently stop on the dummy
# breakpoint inserted by GDB at the program's entry point.
#
2010-05-28 01:39:56 +02:00
gdb_test_multiple "finish" "finish from called function" {
2014-10-22 11:24:25 +02:00
-re "Run till exit from .*marker2.* at .*$bp_location8\r\n.*function called from gdb.*$gdb_prompt $" {
2010-05-28 01:39:56 +02:00
pass "finish from called function"
}
2014-10-22 11:24:25 +02:00
-re "Run till exit from .*marker2.* at .*$bp_location8\r\n.*Value returned.*$gdb_prompt $" {
2010-05-28 01:39:56 +02:00
pass "finish from called function"
}
1999-04-16 03:35:26 +02:00
}
# Verify that GDB responds gracefully to a "finish" command with
# arguments.
#
if ![runto_main] then { fail "break tests suppressed" }
send_gdb "finish 123\n"
gdb_expect {
-re "The \"finish\" command does not take any arguments.\r\n$gdb_prompt $"\
{pass "finish with arguments disallowed"}
-re "$gdb_prompt $"\
{fail "finish with arguments disallowed"}
timeout {fail "(timeout) finish with arguments disallowed"}
}
# Verify that GDB responds gracefully to a request to "finish" from
1999-04-26 20:34:20 +02:00
# the outermost frame. On a stub that never exits, this will just
# run to the stubs routine, so we don't get this error... Thus the
# second condition.
1999-04-16 03:35:26 +02:00
#
1999-04-26 20:34:20 +02:00
2010-05-28 01:39:56 +02:00
gdb_test_multiple "finish" "finish from outermost frame disallowed" {
-re "\"finish\" not meaningful in the outermost frame.\r\n$gdb_prompt $" {
pass "finish from outermost frame disallowed"
}
-re "Run till exit from.*\r\n$gdb_prompt $" {
pass "finish from outermost frame disallowed"
}
1999-04-16 03:35:26 +02:00
}
#********
#
# Test "next" over recursive function call.
#
proc test_next_with_recursion {} {
global gdb_prompt
global decimal
global binfile
2007-03-27 19:59:38 +02:00
gdb_test "kill" "" "kill program" "Kill the program being debugged.*y or n. $" "y"
delete_breakpoints
1999-04-16 03:35:26 +02:00
gdb_test "break factorial" "Breakpoint $decimal at .*" "break at factorial"
# Run until we call factorial with 6
2007-03-27 19:59:38 +02:00
gdb_run_cmd
2014-09-12 23:16:31 +02:00
gdb_test "" "Break.* factorial .value=6. .*" "run to factorial(6)"
1999-04-16 03:35:26 +02:00
# Continue until we call factorial recursively with 5.
if [gdb_test "continue" \
"Continuing.*Break.* factorial .value=5. .*" \
"continue to factorial(5)"] then { gdb_suppress_tests }
# Do a backtrace just to confirm how many levels deep we are.
if [gdb_test "backtrace" \
"#0\[ \t\]+ factorial .value=5..*" \
"backtrace from factorial(5)"] then { gdb_suppress_tests }
# Now a "next" should position us at the recursive call, which
# we will be performing with 4.
if [gdb_test "next" \
".* factorial .value - 1.;.*" \
"next to recursive call"] then { gdb_suppress_tests }
# Disable the breakpoint at the entry to factorial by deleting them all.
# The "next" should run until we return to the next line from this
# recursive call to factorial with 4.
# Buggy versions of gdb will stop instead at the innermost frame on
# the line where we are trying to "next" to.
delete_breakpoints
if [istarget "mips*tx39-*"] {
set timeout 60
}
2001-12-07 22:02:31 +01:00
# We used to set timeout here for all other targets as well. This
# is almost certainly wrong. The proper timeout depends on the
# target system in use, and how we communicate with it, so there
# is no single value appropriate for all targets. The timeout
# should be established by the Dejagnu config file(s) for the
# board, and respected by the test suite.
#
# For example, if I'm running GDB over an SSH tunnel talking to a
# portmaster in California talking to an ancient 68k board running
# a crummy ROM monitor (a situation I can only wish were
# hypothetical), then I need a large timeout. But that's not the
# kind of knowledge that belongs in this file.
1999-04-16 03:35:26 +02:00
gdb_test next "\[0-9\]*\[\t \]+return \\(value\\);.*" \
"next over recursive call"
# OK, we should be back in the same stack frame we started from.
# Do a backtrace just to confirm.
set result [gdb_test "backtrace" \
"#0\[ \t\]+ factorial .value=120.*\r\n#1\[ \t\]+ \[0-9a-fx\]+ in factorial .value=6..*" \
"backtrace from factorial(5.1)"]
if { $result != 0 } { gdb_suppress_tests }
if [target_info exists gdb,noresults] { gdb_suppress_tests }
1999-04-26 20:34:20 +02:00
gdb_continue_to_end "recursive next test"
2013-06-07 19:31:09 +02:00
gdb_stop_suppressing_tests
1999-04-16 03:35:26 +02:00
}
test_next_with_recursion
2000-03-24 22:35:42 +01:00
#********
# build a new file with optimization enabled so that we can try breakpoints
# on targets with optimized prologues
2016-12-23 17:52:18 +01:00
if { [prepare_for_testing "failed to prepare" "breako2" {break.c break1.c} {debug nowarnings optimize=-O2}] } {
2000-03-24 22:35:42 +01:00
return -1
}
#
# test break at function
#
gdb_test "break main" \
2006-05-06 00:45:35 +02:00
"Breakpoint.*at.* file .*, line.*" \
2000-03-24 22:35:42 +01:00
"breakpoint function, optimized file"
#
# test break at function
#
gdb_test "break marker4" \
2003-12-09 19:19:20 +01:00
"Breakpoint.*at.* file .*$srcfile1, line.*" \
2000-03-24 22:35:42 +01:00
"breakpoint small function, optimized file"
#
# run until the breakpoint at main is hit. For non-stubs-using targets.
#
2007-03-27 19:59:38 +02:00
gdb_run_cmd
2014-09-12 23:16:31 +02:00
set test "run until function breakpoint, optimized file"
gdb_test_multiple "" $test {
2007-03-27 19:59:38 +02:00
-re "Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*$gdb_prompt $" {
2014-09-12 23:16:31 +02:00
pass $test
2000-03-24 22:35:42 +01:00
}
2007-03-27 19:59:38 +02:00
-re "Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$gdb_prompt $" {
2014-09-12 23:16:31 +02:00
pass "$test (code motion)"
2000-03-24 22:35:42 +01:00
}
}
#
# run until the breakpoint at a small function
#
2000-05-17 19:10:19 +02:00
#
# Add a second pass pattern. The behavior differs here between stabs
# and dwarf for one-line functions. Stabs preserves two line symbols
# (one before the prologue and one after) with the same line number,
# but dwarf regards these as duplicates and discards one of them.
# Therefore the address after the prologue (where the breakpoint is)
# has no exactly matching line symbol, and GDB reports the breakpoint
# as if it were in the middle of a line rather than at the beginning.
2003-12-09 19:19:20 +01:00
set bp_location14 [gdb_get_line_number "set breakpoint 14 here" $srcfile1]
2010-05-28 01:39:56 +02:00
gdb_test_multiple "continue" \
"run until breakpoint set at small function, optimized file" {
gdb/
Display @entry parameter values (without references).
* dwarf2expr.c (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset):
New functions.
* dwarf2expr.h (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset):
New declarations.
* dwarf2loc.c (dwarf2_find_location_expression): Support location list
entry record.
(dwarf_entry_parameter_to_value, value_of_dwarf_reg_entry)
(value_of_dwarf_block_entry, locexpr_read_variable_at_entry): New
functions.
(dwarf2_locexpr_funcs): Install locexpr_read_variable_at_entry.
(loclist_read_variable_at_entry): New function.
(dwarf2_loclist_funcs): Install loclist_read_variable_at_entry.
* dwarf2read.c (read_call_site_scope): Support also DW_OP_fbreg in
DW_AT_location, call dwarf_block_to_sp_offset for it.
* frame.h (print_entry_values_no, print_entry_values_only)
(print_entry_values_preferred, print_entry_values_if_needed)
(print_entry_values_both, print_entry_values_compact)
(print_entry_values_default, print_entry_values): New declarations.
(struct frame_arg): New field entry_kind.
(read_frame_arg): New parameter entryargp.
* mi/mi-cmd-stack.c (list_arg_or_local): New gdb_assert for
arg->entry_kind. Optionally print the `@entry' suffix.
(list_args_or_locals): New variable entryarg, initialize it.
Initialize also entry_kind of arg and entryarg. Conditionalize
list_arg_or_local for arg, add list_arg_or_local for entryarg. Call
xfree for entryarg.error.
* stack.c (print_entry_values_no, print_entry_values_only)
(print_entry_values_preferred, print_entry_values_if_needed)
(print_entry_values_both, print_entry_values_compact)
(print_entry_values_default, print_entry_values_choices)
(print_entry_values): New variables.
(print_frame_arg): New gdb_assert for arg->entry_kind. Optionally
print the `@entry' suffix, possibly in combination for
print_entry_values_compact.
(read_frame_arg): New parameter entryargp, new variables entryval,
entryval_error and val_equal. Read in also entryargp, respect
print_entry_values, compare the values using val_equal, fill in also
argp->entry_kind (together with entryargp->entry_kind).
(print_frame_args): New variable entryarg, initialize it.
Conditionalize print_frame_arg for arg, add print_frame_arg for
entryarg. Call xfree for entryarg.error.
(_initialize_stack): Call add_setshow_enum_cmd for `entry-values'.
* symtab.h (struct symbol_computed_ops): New field
read_variable_at_entry.
gdb/doc/
Display @entry parameter values (without references).
* gdb.texinfo (Tail Call Frames): Add anchor. Add self tail call
example.
(Print Settings): New description of set print entry-values and show
print entry-values.
gdb/testsuite/
Display @entry parameter values (without references).
* gdb.arch/amd64-entry-value.cc (locexpr, stacktest, data, data2)
(different, validity, invalid): New functions.
(main): Call them.
* gdb.arch/amd64-entry-value.exp: New breakpoints breakhere_locexpr,
stacktest, breakhere_stacktest, different, breakhere_different,
breakhere_validity and breakhere_invalid.
(entry: bt): Update for @entry.
(entry_locexpr: *, entry_stack: *, entry_equal: *, entry_different: *)
(entry_validity: *, entry_invalid: *): Many new tests.
* gdb.base/break.exp
(run until breakpoint set at small function, optimized file): Accept
also the @entry suffix.
* gdb.mi/Makefile.in (PROGS): Add mi2-amd64-entry-value.
* gdb.mi/mi2-amd64-entry-value.c: New files.
* gdb.mi/mi2-amd64-entry-value.exp: New files.
2011-10-09 21:34:19 +02:00
-re "Breakpoint $decimal, marker4 \\(d=(d@entry=)?177601976\\) at .*$srcfile1:$bp_location14\[\r\n\]+$bp_location14\[\t \]+void marker4.*" {
2010-05-28 01:39:56 +02:00
pass "run until breakpoint set at small function, optimized file (line bp_location14)"
}
-re "Breakpoint $decimal, factorial \\(.*\\) .*\{\r\n$gdb_prompt" {
# GCC 4.3 emits bad line number information - see gcc/36748.
if { [test_compiler_info "gcc-4-3-*"] } {
setup_xfail *-*-*
}
fail "run until breakpoint set at small function, optimized file"
gdb/
* NEWS: Document inlined function support.
* Makefile.in (SFILES): Add inline-frame.c.
(COMMON_OBS): Add inline-frame.o.
* block.c (contained_in): Rewrite to use lexical nesting.
(block_linkage_function): Skip inlined function blocks.
(block_inlined_p): New.
* block.h (struct block): Update comment.
(block_inlined_p): New prototype.
* blockframe.c (get_frame_block): Handle inlined functions.
(get_frame_function): Do not use block_linkage_function.
(block_innermost_frame): Use get_frame_block and contained_in.
* breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache.
Skip over inlined functions. Simplify epilogue check.
(bpstat_check_breakpoint_conditions): Use get_stack_frame_id.
Update comments.
(set_momentary_breakpoint): Only accept non-inlined frames.
(watch_command_1): Use frame_unwind_caller_pc and
frame_unwind_caller_id instead of get_prev_frame.
(until_break_command): Likewise. Use get_stack_frame_id.
* buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions.
* dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function.
* dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine.
(read_func_scope, new_symbol): Likewise. Handle arguments specially
for inlined functions without call site information.
(inherit_abstract_dies): Allow tag mismatch for inlined subroutines.
(die_specification): Treat DW_AT_abstract_origin as a specification.
(read_type_die): Handle DW_TAG_inlined_subroutine.
* frame-unwind.c (frame_unwind_init): Add inline_frame_unwind.
* frame.c (fprint_frame_id): Print inline depth.
(fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME.
(skip_inlined_frames, get_stack_frame_id): New.
(frame_unwind_caller_id): Use skip_inlined_frames.
(frame_id_inlined_p): New.
(frame_id_eq): Make the logic match the comments. Add inline_depth
check.
(frame_id_inner): Handle inlined functions.
(frame_unwind_pc): New function, copied from frame_unwind_caller_pc.
(frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc.
(get_prev_frame_1): Check for inline frames. Split out frame
allocation to get_prev_frame_raw.
(get_prev_frame_raw): New function.
(get_prev_frame): Handle inline frames.
(get_frame_pc): Use frame_unwind_pc.
(get_frame_address_in_block): Skip inlined frames on both sides.
(pc_notcurrent): Delete.
(find_frame_sal): Rewrite to handle inline call sites. Use
get_frame_address_in_block.
(deprecated_update_frame_pc_hack): Make static.
* frame.h: Update comments.
(struct frame_id): Add inline_depth.
(enum frame_type): Add INLINE_FRAME.
(frame_id_inlined_p, get_stack_frame_id): New prototypes.
* gdbthread.h (struct thread_info): Add step_stack_frame_id field.
* infcmd.c (set_step_frame): New function.
(step_once): Use set_step_frame. Handle inlined functions.
(until_next_command): Use set_step_frame.
(finish_backward), finish_forward): Use get_stack_frame_id.
(finish_command): Support inlined functions.
* inferior.h (set_step_info): New prototype.
* infrun.c (RESUME_ALL): Use minus_one_ptid.
(clear_proceed_status): Clear step_stack_frame_id.
(init_wait_for_inferior): Call clear_inline_frame_state.
(init_execution_control_state): Make static.
(set_step_info): New function.
(init_thread_stepping_state): Do not set the symtab or line here.
(stepped_in_from): New function.
(handle_inferior_event): Handle inlined functions. Use set_step_info.
(insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id.
(struct inferior_status): Add step_stack_frame_id.
(save_inferior_status, restore_inferior_status): Save and restore
step_stack_frame_id.
* inline-frame.c, inline-frame.h: New files.
* minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC.
* regcache.c (regcache_write_pc): Call reinit_frame_cache.
* s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME.
* stack.c (frame_show_address): New.
(print_frame_info, print_frame): Use it.
(find_frame_funname): Use get_frame_function. Handle inlined blocks.
(frame_info): Mark inlined functions.
(backtrace_command_1): Use get_current_user_frame.
(print_frame_local_vars, print_frame_label_vars): Update comments.
(return_command): Refuse inlined functions.
* symtab.c (lookup_symbol_aux_local): Stop at inlined function
boundaries.
(find_function_start_sal): Avoid inlined functions.
(completion_list_add_fields): New function.
(default_make_symbol_completion_list): Use it. Use block_static_block
and block_global_block. Check for inlined functions.
(skip_prologue_using_sal): Avoid line number comparison across
inlining.
* symtab.h (struct symbol): Add is_inlined.
(SYMBOL_INLINED): New.
* target.c (target_resume): Call clear_inline_frame_state.
* valops.c (value_of_variable): Check block_inlined_p.
gdb/doc/
* gdb.texinfo (Debugging Optimized Code): New chapter.
(Compiling for Debugging): Reference it. Move some
text to the new section.
gdb/testsuite/
* gdb.base/break.exp: Add an XFAIL for gcc/36748.
* gdb.cp/annota2.exp: Accept frames-invalid in more places.
* gdb.opt/Makefile.in (EXECUTABLES): Update.
* gdb.opt/clobbered-registers-O2.exp: Update to GPL v3.
* gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp,
gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp,
gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp,
gdb.opt/inline-markers.c: New files.
* lib/gdb.exp (skip_inline_frame_tests): New function.
(skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
}
2000-05-17 19:10:19 +02:00
}
2000-03-24 22:35:42 +01:00
2008-04-07 18:32:44 +02:00
clean_restart breako2
2008-03-21 16:33:11 +01:00
#
# test that 'rbreak' on a symbol that may be from a shared library doesn't
# cause a "Junk at end of arguments." error.
#
# On x86 GNU/Linux, this test will choke on e.g. __libc_start_main@plt.
#
# Note that this test won't necessarily choke on all targets even if
# all the rbreak issue is present. rbreak needs to match and set a
# breakpoint on a symbol causes 'break' to choke.
#
2010-06-01 23:29:21 +02:00
gdb_test_no_output "set breakpoint pending on" "rbreak junk pending setup"
2008-03-21 16:33:11 +01:00
# We expect at least one breakpoint to be set when we "rbreak main".
gdb_test "rbreak main" \
".*Breakpoint.*at.* file .*$srcfile, line.*" \
"rbreak junk set breakpoint"
# Run to a breakpoint. Fail if we see "Junk at end of arguments".
gdb_run_cmd
2014-09-12 23:16:31 +02:00
set test "rbreak junk"
gdb_test_multiple "" $test {
2008-03-21 16:33:11 +01:00
-re "Junk at end of arguments" {
2014-09-12 23:16:31 +02:00
fail $test
2008-03-21 16:33:11 +01:00
}
-re ".*Breakpoint \[0-9\]+,.*$gdb_prompt $" {
2014-09-12 23:16:31 +02:00
pass $test
2008-03-21 16:33:11 +01:00
}
}
? .deps
? Makefile
? ada-exp.c
? ada-lex.c
? build-gnulib
? c-exp.c
? config.cache
? config.h
? config.log
? config.status
? cp-name-parser.c
? f-exp.c
? gcore
? gdb
? gdb-gdb.gdb
? go-exp.c
? init.c
? jit-reader.h
? jv-exp.c
? m2-exp.c
? observer.h
? observer.inc
? p-exp.c
? stamp-h
? stamp-xml
? version.c
? xml-builtin.c
? data-directory/Makefile
? data-directory/python
? data-directory/stamp-python
? data-directory/stamp-syscalls
? data-directory/stamp-system-gdbinit
? data-directory/syscalls
? data-directory/system-gdbinit
? doc/Makefile
? gdbserver/.deps
? gdbserver/Makefile
? gdbserver/build-gnulib-gdbserver
? gdbserver/config.cache
? gdbserver/config.h
? gdbserver/config.log
? gdbserver/config.status
? gdbserver/gdbreplay
? gdbserver/gdbserver
? gdbserver/i386-avx-linux.c
? gdbserver/i386-linux.c
? gdbserver/i386-mmx-linux.c
? gdbserver/stamp-h
? gdbserver/stamp-xml
? gdbserver/version.c
? gdbserver/xml-builtin.c
? testsuite/Makefile
? testsuite/config.log
? testsuite/config.status
? testsuite/gdb.log
? testsuite/gdb.sum
? testsuite/site.exp
? testsuite/gdb.ada/Makefile
? testsuite/gdb.arch/Makefile
? testsuite/gdb.asm/Makefile
? testsuite/gdb.base/Makefile
? testsuite/gdb.btrace/Makefile
? testsuite/gdb.cell/Makefile
? testsuite/gdb.cp/Makefile
? testsuite/gdb.disasm/Makefile
? testsuite/gdb.dwarf2/Makefile
? testsuite/gdb.fortran/Makefile
? testsuite/gdb.go/Makefile
? testsuite/gdb.hp/Makefile
? testsuite/gdb.hp/gdb.aCC/Makefile
? testsuite/gdb.hp/gdb.base-hp/Makefile
? testsuite/gdb.hp/gdb.compat/Makefile
? testsuite/gdb.hp/gdb.defects/Makefile
? testsuite/gdb.hp/gdb.objdbg/Makefile
? testsuite/gdb.java/Makefile
? testsuite/gdb.linespec/Makefile
? testsuite/gdb.mi/Makefile
? testsuite/gdb.modula2/Makefile
? testsuite/gdb.multi/Makefile
? testsuite/gdb.objc/Makefile
? testsuite/gdb.opencl/Makefile
? testsuite/gdb.opt/Makefile
? testsuite/gdb.pascal/Makefile
? testsuite/gdb.python/Makefile
? testsuite/gdb.reverse/Makefile
? testsuite/gdb.server/Makefile
? testsuite/gdb.stabs/Makefile
? testsuite/gdb.threads/Makefile
? testsuite/gdb.threads/threadapply
? testsuite/gdb.trace/Makefile
? testsuite/gdb.xml/Makefile
RCS file: /cvs/src/src/gdb/.dir-locals.el,v
Working file: .dir-locals.el
head: 1.2
branch:
locks: strict
access list:
symbolic names:
gdb_7_6-2013-04-26-release: 1.2
gdb_7_6-branch: 1.2.0.2
gdb_7_6-2013-03-12-branchpoint: 1.2
gdb_7_5_1-2012-11-29-release: 1.1
gdb_7_5-2012-08-17-release: 1.1
gdb_7_5-branch: 1.1.0.2
gdb_7_5-2012-07-18-branchpoint: 1.1
keyword substitution: kv
total revisions: 2; selected revisions: 2
description:
----------------------------
revision 1.2
date: 2013/01/01 06:32:34; author: brobecke; state: Exp; lines: +1 -1
Update years in copyright notice for the GDB files.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
----------------------------
revision 1.1
date: 2012/03/28 17:35:38; author: tromey; state: Exp;
* .dir-locals.el: New file.
=============================================================================
RCS file: /cvs/src/src/gdb/.gitignore,v
Working file: .gitignore
head: 1.5
branch:
locks: strict
access list:
symbolic names:
gdb_7_6-2013-04-26-release: 1.4
gdb_7_6-branch: 1.4.0.2
gdb_7_6-2013-03-12-branchpoint: 1.4
gdb_7_5_1-2012-11-29-release: 1.3
gdb_7_5-2012-08-17-release: 1.3
gdb_7_5-branch: 1.3.0.2
gdb_7_5-2012-07-18-branchpoint: 1.3
gdb_7_4_1-2012-04-26-release: 1.1
gdb_7_4-2012-01-24-release: 1.1
gdb_7_4-branch: 1.1.0.4
gdb_7_4-2011-12-13-branchpoint: 1.1
gdb_7_3_1-2011-09-04-release: 1.1
gdb_7_3-2011-07-26-release: 1.1
gdb_7_3-branch: 1.1.0.2
gdb_7_3-2011-04-01-branchpoint: 1.1
keyword substitution: kv
total revisions: 5; selected revisions: 5
description:
----------------------------
revision 1.5
date: 2013/06/17 04:39:15; author: vapier; state: Exp; lines: +1 -0
gdb: ignore generated gcore
----------------------------
revision 1.4
date: 2012/08/13 15:43:59; author: vapier; state: Exp; lines: +1 -0
gdb: ignore generated go-exp.c
----------------------------
revision 1.3
date: 2012/03/21 04:53:29; author: vapier; state: Exp; lines: +2 -0
gdb: update gitignore
----------------------------
revision 1.2
date: 2012/01/02 02:28:56; author: jkratoch; state: Exp; lines: +0 -1
gdb/
Remove the gdbtui binary.
* .gitignore (/gdbtui): Remove.
* Makefile.in (TUI): Remove.
(SUBDIR_TUI_OBS): Remove tui-main.o.
(SUBDIR_TUI_SRCS): Remove tui/tui-main.c.
(all-tui, install-tui, uninstall-tui, $(TUI)$(EXEEXT), clean-tui)
(tui-main.o): Remove.
(all_object_files): Remove tui-main.o.
* NEWS: New note for the gdbtui removal.
* configure: Rebuilt.
* configure.ac: No longer add all-tui, clean-tui, install-tui and
uninstall-tui to CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL and
CONFIG_UNINSTALL respectively.
* gdb.c (main): Remove args.interpreter_p initialization.
* main.c (captured_main): Set INTERPRETER_P directly by INTERP_CONSOLE.
* main.h (struct captured_main_args): Remove interpreter_p.
* tui/tui-main.c: Remove.
gdb/doc/
Remove the gdbtui binary.
* all-cfg.texi (GDBTUI): Remove.
* gdb.texinfo (Mode Options): Remove the GDBTUI reference.
(TUI): Remove GDBTUI pindex. Remove the GDBTUI reference.
* gdbint.texinfo (Testsuite): Replace `gdbtui' by `gdb -tui'.
----------------------------
revision 1.1
date: 2011/03/29 18:21:32; author: vapier; state: Exp;
gdb: start a gitignore
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
=============================================================================
RCS file: /cvs/src/src/gdb/CONTRIBUTE,v
Working file: CONTRIBUTE
head: 1.13
branch:
locks: strict
access list:
symbolic names:
gdb_7_6-2013-04-26-release: 1.13
gdb_7_6-branch: 1.13.0.4
gdb_7_6-2013-03-12-branchpoint: 1.13
gdb_7_5_1-2012-11-29-release: 1.13
gdb_7_5-2012-08-17-release: 1.13
gdb_7_5-branch: 1.13.0.2
gdb_7_5-2012-07-18-branchpoint: 1.13
gdb_7_4_1-2012-04-26-release: 1.12
gdb_7_4-2012-01-24-release: 1.12
gdb_7_4-branch: 1.12.0.10
gdb_7_4-2011-12-13-branchpoint: 1.12
gdb_7_3_1-2011-09-04-release: 1.12
gdb_7_3-2011-07-26-release: 1.12
gdb_7_3-branch: 1.12.0.8
gdb_7_3-2011-04-01-branchpoint: 1.12
gdb_7_2-2010-09-02-release: 1.12
gdb_7_2-branch: 1.12.0.6
gdb_7_2-2010-07-07-branchpoint: 1.12
gdb_7_1-2010-03-18-release: 1.12
gdb_7_1-branch: 1.12.0.4
gdb_7_1-2010-02-18-branchpoint: 1.12
gdb_7_0_1-2009-12-22-release: 1.12
gdb_7_0-2009-10-06-release: 1.12
gdb_7_0-branch: 1.12.0.2
gdb_7_0-2009-09-16-branchpoint: 1.12
arc-sim-20090309: 1.9
msnyder-checkpoint-072509-branch: 1.11.0.2
msnyder-checkpoint-072509-branchpoint: 1.11
arc-insight_6_8-branch: 1.9.0.16
arc-insight_6_8-branchpoint: 1.9
insight_6_8-branch: 1.9.0.14
insight_6_8-branchpoint: 1.9
reverse-20081226-branch: 1.10.0.4
reverse-20081226-branchpoint: 1.10
multiprocess-20081120-branch: 1.10.0.2
multiprocess-20081120-branchpoint: 1.10
reverse-20080930-branch: 1.9.0.12
reverse-20080930-branchpoint: 1.9
reverse-20080717-branch: 1.9.0.10
reverse-20080717-branchpoint: 1.9
msnyder-reverse-20080609-branch: 1.9.0.8
msnyder-reverse-20080609-branchpoint: 1.9
drow-reverse-20070409-branch: 1.9.0.6
drow-reverse-20070409-branchpoint: 1.9
gdb_6_8-2008-03-27-release: 1.9
gdb_6_8-branch: 1.9.0.4
gdb_6_8-2008-02-26-branchpoint: 1.9
gdb_6_7_1-2007-10-29-release: 1.9
gdb_6_7-2007-10-10-release: 1.9
gdb_6_7-branch: 1.9.0.2
gdb_6_7-2007-09-07-branchpoint: 1.9
insight_6_6-20070208-release: 1.8
gdb_6_6-2006-12-18-release: 1.8
gdb_6_6-branch: 1.8.0.106
gdb_6_6-2006-11-15-branchpoint: 1.8
insight_6_5-20061003-release: 1.8
gdb-csl-symbian-6_4_50_20060226-12: 1.8
gdb-csl-sourcerygxx-3_4_4-25: 1.8
nickrob-async-20060828-mergepoint: 1.8
gdb-csl-symbian-6_4_50_20060226-11: 1.8
gdb-csl-sourcerygxx-4_1-17: 1.8
gdb-csl-20060226-branch-local-2: 1.8
gdb-csl-sourcerygxx-4_1-14: 1.8
gdb-csl-sourcerygxx-4_1-13: 1.8
gdb-csl-sourcerygxx-4_1-12: 1.8
gdb-csl-sourcerygxx-3_4_4-21: 1.8
gdb_6_5-20060621-release: 1.8
gdb-csl-sourcerygxx-4_1-9: 1.8
gdb-csl-sourcerygxx-4_1-8: 1.8
gdb-csl-sourcerygxx-4_1-7: 1.8
gdb-csl-arm-2006q1-6: 1.8
gdb-csl-sourcerygxx-4_1-6: 1.8
gdb-csl-symbian-6_4_50_20060226-10: 1.8
gdb-csl-symbian-6_4_50_20060226-9: 1.8
gdb-csl-symbian-6_4_50_20060226-8: 1.8
gdb-csl-coldfire-4_1-11: 1.8
gdb-csl-sourcerygxx-3_4_4-19: 1.8
gdb-csl-coldfire-4_1-10: 1.8
gdb_6_5-branch: 1.8.0.104
gdb_6_5-2006-05-14-branchpoint: 1.8
gdb-csl-sourcerygxx-4_1-5: 1.8
nickrob-async-20060513-branch: 1.8.0.102
nickrob-async-20060513-branchpoint: 1.8
gdb-csl-sourcerygxx-4_1-4: 1.8
msnyder-reverse-20060502-branch: 1.8.0.100
msnyder-reverse-20060502-branchpoint: 1.8
gdb-csl-morpho-4_1-4: 1.8
gdb-csl-sourcerygxx-3_4_4-17: 1.8
readline_5_1-import-branch: 1.8.0.98
readline_5_1-import-branchpoint: 1.8
gdb-csl-20060226-branch-merge-to-csl-symbian-1: 1.8
gdb-csl-symbian-20060226-branch: 1.8.0.96
gdb-csl-symbian-20060226-branchpoint: 1.8
gdb-csl-20060226-branch-merge-to-csl-local-1: 1.8
msnyder-reverse-20060331-branch: 1.8.0.94
msnyder-reverse-20060331-branchpoint: 1.8
gdb-csl-available-20060303-branch: 1.8.0.92
gdb-csl-available-20060303-branchpoint: 1.8
gdb-csl-20060226-branch: 1.8.0.90
gdb-csl-20060226-branchpoint: 1.8
gdb_6_4-20051202-release: 1.8
msnyder-fork-checkpoint-branch: 1.8.0.88
msnyder-fork-checkpoint-branchpoint: 1.8
gdb-csl-gxxpro-6_3-branch: 1.8.0.86
gdb-csl-gxxpro-6_3-branchpoint: 1.8
gdb_6_4-branch: 1.8.0.84
gdb_6_4-2005-11-01-branchpoint: 1.8
gdb-csl-arm-20051020-branch: 1.8.0.82
gdb-csl-arm-20051020-branchpoint: 1.8
msnyder-tracepoint-checkpoint-branch: 1.8.0.80
msnyder-tracepoint-checkpoint-branchpoint: 1.8
gdb-csl-arm-20050325-2005-q1b: 1.8
gdb-csl-arm-20050325-2005-q1a: 1.8
csl-arm-20050325-branch: 1.8.0.78
csl-arm-20050325-branchpoint: 1.8
gdb-post-i18n-errorwarning-20050211: 1.8
gdb-pre-i18n-errorwarning-20050211: 1.8
gdb_6_3-20041109-release: 1.8
gdb_6_3-branch: 1.8.0.74
gdb_6_3-20041019-branchpoint: 1.8
drow_intercu-merge-20040921: 1.8
drow_intercu-merge-20040915: 1.8
jimb-gdb_6_2-e500-branch: 1.8.0.76
jimb-gdb_6_2-e500-branchpoint: 1.8
gdb_6_2-20040730-release: 1.8
gdb_6_2-branch: 1.8.0.72
gdb_6_2-2004-07-10-gmt-branchpoint: 1.8
gdb_6_1_1-20040616-release: 1.8
gdb_6_1-2004-04-05-release: 1.8
drow_intercu-merge-20040402: 1.8
drow_intercu-merge-20040327: 1.8
ezannoni_pie-20040323-branch: 1.8.0.70
ezannoni_pie-20040323-branchpoint: 1.8
cagney_tramp-20040321-mergepoint: 1.8
cagney_tramp-20040309-branch: 1.8.0.68
cagney_tramp-20040309-branchpoint: 1.8
gdb_6_1-branch: 1.8.0.66
gdb_6_1-2004-03-01-gmt-branchpoint: 1.8
drow_intercu-20040221-branch: 1.8.0.64
drow_intercu-20040221-branchpoint: 1.8
cagney_bfdfile-20040213-branch: 1.8.0.62
cagney_bfdfile-20040213-branchpoint: 1.8
drow-cplus-merge-20040208: 1.8
carlton_dictionary-20040126-merge: 1.8
cagney_bigcore-20040122-branch: 1.8.0.60
cagney_bigcore-20040122-branchpoint: 1.8
drow-cplus-merge-20040113: 1.8
drow-cplus-merge-20031224: 1.8
drow-cplus-merge-20031220: 1.8
carlton_dictionary-20031215-merge: 1.8
drow-cplus-merge-20031214: 1.8
carlton-dictionary-20031111-merge: 1.8
gdb_6_0-2003-10-04-release: 1.8
kettenis_sparc-20030918-branch: 1.8.0.58
kettenis_sparc-20030918-branchpoint: 1.8
carlton_dictionary-20030917-merge: 1.8
ezannoni_pie-20030916-branchpoint: 1.8
ezannoni_pie-20030916-branch: 1.8.0.56
cagney_x86i386-20030821-branch: 1.8.0.54
cagney_x86i386-20030821-branchpoint: 1.8
carlton_dictionary-20030805-merge: 1.8
carlton_dictionary-20030627-merge: 1.8
gdb_6_0-branch: 1.8.0.52
gdb_6_0-2003-06-23-branchpoint: 1.8
jimb-ppc64-linux-20030613-branch: 1.8.0.50
jimb-ppc64-linux-20030613-branchpoint: 1.8
cagney_convert-20030606-branch: 1.8.0.48
cagney_convert-20030606-branchpoint: 1.8
cagney_writestrings-20030508-branch: 1.8.0.46
cagney_writestrings-20030508-branchpoint: 1.8
jimb-ppc64-linux-20030528-branch: 1.8.0.44
jimb-ppc64-linux-20030528-branchpoint: 1.8
carlton_dictionary-20030523-merge: 1.8
cagney_fileio-20030521-branch: 1.8.0.42
cagney_fileio-20030521-branchpoint: 1.8
kettenis_i386newframe-20030517-mergepoint: 1.8
jimb-ppc64-linux-20030509-branch: 1.8.0.40
jimb-ppc64-linux-20030509-branchpoint: 1.8
kettenis_i386newframe-20030504-mergepoint: 1.8
carlton_dictionary-20030430-merge: 1.8
kettenis_i386newframe-20030419-branch: 1.8.0.38
kettenis_i386newframe-20030419-branchpoint: 1.8
carlton_dictionary-20030416-merge: 1.8
cagney_frameaddr-20030409-mergepoint: 1.8
kettenis_i386newframe-20030406-branch: 1.8.0.36
kettenis_i386newframe-20030406-branchpoint: 1.8
cagney_frameaddr-20030403-branchpoint: 1.8
cagney_frameaddr-20030403-branch: 1.8.0.34
cagney_framebase-20030330-mergepoint: 1.8
cagney_framebase-20030326-branch: 1.8.0.32
cagney_framebase-20030326-branchpoint: 1.8
cagney_lazyid-20030317-branch: 1.8.0.30
cagney_lazyid-20030317-branchpoint: 1.8
kettenis-i386newframe-20030316-mergepoint: 1.8
offbyone-20030313-branch: 1.8.0.28
offbyone-20030313-branchpoint: 1.8
kettenis-i386newframe-20030308-branch: 1.8.0.26
kettenis-i386newframe-20030308-branchpoint: 1.8
carlton_dictionary-20030305-merge: 1.8
cagney_offbyone-20030303-branch: 1.8.0.24
cagney_offbyone-20030303-branchpoint: 1.8
carlton_dictionary-20030207-merge: 1.8
interps-20030203-mergepoint: 1.8
interps-20030202-branch: 1.8.0.22
interps-20030202-branchpoint: 1.8
cagney-unwind-20030108-branch: 1.8.0.20
cagney-unwind-20030108-branchpoint: 1.8
carlton_dictionary-20021223-merge: 1.8
gdb_5_3-2002-12-12-release: 1.8
carlton_dictionary-20021115-merge: 1.8
kseitz_interps-20021105-merge: 1.8
kseitz_interps-20021103-merge: 1.8
drow-cplus-merge-20021020: 1.8
drow-cplus-merge-20021025: 1.8
carlton_dictionary-20021025-merge: 1.8
carlton_dictionary-20021011-merge: 1.8
drow-cplus-branch: 1.8.0.18
drow-cplus-branchpoint: 1.8
kseitz_interps-20020930-merge: 1.8
carlton_dictionary-20020927-merge: 1.8
carlton_dictionary-branch: 1.8.0.16
carlton_dictionary-20020920-branchpoint: 1.8
gdb_5_3-branch: 1.8.0.14
gdb_5_3-2002-09-04-branchpoint: 1.8
kseitz_interps-20020829-merge: 1.8
cagney_sysregs-20020825-branch: 1.8.0.12
cagney_sysregs-20020825-branchpoint: 1.8
readline_4_3-import-branch: 1.8.0.10
readline_4_3-import-branchpoint: 1.8
gdb_5_2_1-2002-07-23-release: 1.8
kseitz_interps-20020528-branch: 1.8.0.8
kseitz_interps-20020528-branchpoint: 1.8
cagney_regbuf-20020515-branch: 1.8.0.6
cagney_regbuf-20020515-branchpoint: 1.8
jimb-macro-020506-branch: 1.8.0.4
jimb-macro-020506-branchpoint: 1.8
gdb_5_2-2002-04-29-release: 1.8
gdb_5_2-branch: 1.8.0.2
gdb_5_2-2002-03-03-branchpoint: 1.8
gdb_5_1_1-2002-01-24-release: 1.5.4.1
gdb_5_1_0_1-2002-01-03-release: 1.5.4.1
cygnus_cvs_20020108_pre: 1.6
gdb_5_1_0_1-2002-01-03-branchpoint: 1.5.4.1
gdb_5_1_0_1-2002-01-03-branch: 1.5.4.1.0.4
gdb_5_1-2001-11-21-release: 1.5.4.1
gdb_s390-2001-09-26-branch: 1.5.4.1.0.2
gdb_s390-2001-09-26-branchpoint: 1.5.4.1
gdb_5_1-2001-07-29-branch: 1.5.0.4
gdb_5_1-2001-07-29-branchpoint: 1.5
dberlin-typesystem-branch: 1.5.0.2
dberlin-typesystem-branchpoint: 1.5
gdb-post-ptid_t-2001-05-03: 1.5
gdb-pre-ptid_t-2001-05-03: 1.5
insight-precleanup-2001-01-01: 1.2
gdb-post-protoization-2000-07-29: 1.2
gdb-pre-protoization-2000-07-29: 1.2
gdb-premipsmulti-2000-06-06-branch: 1.2.0.4
gdb-premipsmulti-2000-06-06-branchpoint: 1.2
gdb-post-params-removal-2000-06-04: 1.2
gdb-pre-params-removal-2000-06-04: 1.2
gdb-post-params-removal-2000-05-28: 1.2
gdb-pre-params-removal-2000-05-28: 1.2
gdb_5_0-2000-05-19-release: 1.2
gdb_4_18_2-2000-05-18-release: 1.2
gdb_4_95_1-2000-05-11-snapshot: 1.2
gdb_4_95_0-2000-04-27-snapshot: 1.2
gdb_5_0-2000-04-10-branch: 1.2.0.2
gdb_5_0-2000-04-10-branchpoint: 1.2
keyword substitution: kv
total revisions: 14; selected revisions: 14
description:
----------------------------
revision 1.13
date: 2012/04/25 07:08:07; author: sivachandra; state: Exp; lines: +3 -3
2012-04-25 Siva Chandra Reddy <sivachandra@google.com>
* CONTRIBUTE: Use unified diff instead of context diff when
generating patches.
----------------------------
revision 1.12
date: 2009/08/22 17:08:09; author: rwild; state: Exp; lines: +1 -1
Cleanups after the update to Autoconf 2.64, Automake 1.11.
/:
* README-maintainer-mode: Point directly to upstream locations
for autoconf, automake, libtool, gettext, instead of copies on
sources.redhat.com. Document required versions.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
gdb/:
* CONTRIBUTE: Bump documented Autoconf version.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
gdb/doc/:
* gdbint.texinfo (Releasing GDB): Point to
README-maintainer-mode file for required autoconf version.
* configure.ac: Do not substitute datarootdir, htmldir,
pdfdir, docdir. Do not process --with-datarootdir,
--with-htmldir, --with-pdfdir, --with-docdir.
* configure: Regenerate.
gprof/:
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(install-pdf-recursive, html__strip_dir, install-html)
(install-html-am, install-html-recursive): Remove.
* Makefile.in: Regenerate.
opcodes/:
* Makefile.am (install-pdf, install-html): Remove.
* Makefile.in: Regenerate.
gas/:
* Makefile.am (install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* doc/Makefile.in: Regenerate.
ld/:
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(install-pdf-recursive, html__strip_dir, install-html)
(install-html-am, install-html-recursive): Remove.
* Makefile.in: Regenerate.
binutils/:
* Makefile.am (install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* doc/Makefile.in: Regenerate.
bfd/:
* Makefile.am (datarootdir, docdir, htmldor, pdfdir)
(install-pdf, install-pdf-recursive, install-html)
(install-html-recursive): Remove.
* Makefile.in: Regenerate.
bfd/doc/:
* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
(html__strip_dir, install-html, install-html-am): Remove.
* Makefile.in: Regenerate.
----------------------------
revision 1.11
date: 2009/01/09 04:46:22; author: brobecke; state: Exp; lines: +2 -1
* CONTRIBUTE: Minor reformatting.
----------------------------
revision 1.10
date: 2008/10/27 17:41:57; author: palves; state: Exp; lines: +3 -3
* CONTRIBUTE: Mention autoconf 2.59 and configure.ac instead of
2.13 and configure.in.
----------------------------
revision 1.9
date: 2007/01/04 20:28:38; author: drow; state: Exp; lines: +1 -1
* CONTRIBUTE: Use sourceware.org.
----------------------------
revision 1.8
date: 2002/02/23 20:36:48; author: cagney; state: Exp; lines: +1 -1
From 2002-02-19 Paul Eggert <eggert@twinsun.com>:
* Makefile.in (VER): Change "head -1" to "sed q", since POSIX
1003.1-2001 no longer allows "head -1".
* gdb/Makefile.in (version.c): Likewise.
* gdb/doc/Makefile.in (GDBvn.texi): Likewise.
* gdb/CONTRIBUTE: Change "diff -c3" to "diff -c", which is
equivalent. POSIX 1003.1-2001 no longer allows "diff -c3".
----------------------------
revision 1.7
date: 2002/01/13 16:16:58; author: cagney; state: Exp; lines: +1 -1
From 2002-01-09 John Marshall <johnm@falch.net>:
* CONTRIBUTE, README, TODO: Change sourceware.cygnus.com to
sources.redhat.com, and tweak some related URLs which had
suffered from linkrot.
----------------------------
revision 1.6
date: 2001/09/26 20:52:56; author: cagney; state: Exp; lines: +19 -49
* CONTRIBUTE: Update.
----------------------------
revision 1.5
date: 2001/03/03 03:23:50; author: cagney; state: Exp; lines: +6 -2
branches: 1.5.4;
Change convention to ``Fix PR gdb/NNNN''
----------------------------
revision 1.4
date: 2001/02/23 22:20:38; author: cagney; state: Exp; lines: +9 -0
Mention how to cite GDB problem reports.
----------------------------
revision 1.3
date: 2001/02/23 22:09:30; author: cagney; state: Exp; lines: +7 -0
Mention gdbarch.sh and to not submit gdbarch.[ch].
----------------------------
revision 1.2
date: 2000/03/01 08:33:47; author: cagney; state: Exp; lines: +7 -0
Note that there is no need to send configure.in patches.
----------------------------
revision 1.1
date: 2000/02/13 00:22:01; author: cagney; state: Exp;
Explain how to contribute to GDB.
----------------------------
revision 1.5.4.1
date: 2001/09/26 20:53:27; author: cagney; state: Exp; lines: +19 -49
* CONTRIBUTE: Update.
=============================================================================
RCS file: /cvs/src/src/gdb/COPYING,v
Working file: COPYING
head: 1.3
branch:
locks: strict
access list:
symbolic names:
gdb_7_6-2013-04-26-release: 1.3
gdb_7_6-branch: 1.3.0.12
gdb_7_6-2013-03-12-branchpoint: 1.3
gdb_7_5_1-2012-11-29-release: 1.3
gdb_7_5-2012-08-17-release: 1.3
gdb_7_5-branch: 1.3.0.10
gdb_7_5-2012-07-18-branchpoint: 1.3
gdb_7_4_1-2012-04-26-release: 1.3
gdb_7_4-2012-01-24-release: 1.3
gdb_7_4-branch: 1.3.0.8
gdb_7_4-2011-12-13-branchpoint: 1.3
gdb_7_3_1-2011-09-04-release: 1.3
gdb_7_3-2011-07-26-release: 1.3
gdb_7_3-branch: 1.3.0.6
gdb_7_3-2011-04-01-branchpoint: 1.3
gdb_7_2-2010-09-02-release: 1.3
gdb_7_2-branch: 1.3.0.4
gdb_7_2-2010-07-07-branchpoint: 1.3
gdb_7_1-2010-03-18-release: 1.3
gdb_7_1-branch: 1.3.0.2
gdb_7_1-2010-02-18-branchpoint: 1.3
gdb_7_0_1-2009-12-22-release: 1.2.42.1
gdb_7_0-2009-10-06-release: 1.2
gdb_7_0-branch: 1.2.0.42
gdb_7_0-2009-09-16-branchpoint: 1.2
arc-sim-20090309: 1.2
msnyder-checkpoint-072509-branch: 1.2.0.40
msnyder-checkpoint-072509-branchpoint: 1.2
arc-insight_6_8-branch: 1.2.0.38
arc-insight_6_8-branchpoint: 1.2
insight_6_8-branch: 1.2.0.36
insight_6_8-branchpoint: 1.2
reverse-20081226-branch: 1.2.0.34
reverse-20081226-branchpoint: 1.2
multiprocess-20081120-branch: 1.2.0.32
multiprocess-20081120-branchpoint: 1.2
reverse-20080930-branch: 1.2.0.30
reverse-20080930-branchpoint: 1.2
reverse-20080717-branch: 1.2.0.28
reverse-20080717-branchpoint: 1.2
msnyder-reverse-20080609-branch: 1.2.0.26
msnyder-reverse-20080609-branchpoint: 1.2
drow-reverse-20070409-branch: 1.2.0.24
drow-reverse-20070409-branchpoint: 1.2
gdb_6_8-2008-03-27-release: 1.2
gdb_6_8-branch: 1.2.0.22
gdb_6_8-2008-02-26-branchpoint: 1.2
gdb_6_7_1-2007-10-29-release: 1.2
gdb_6_7-2007-10-10-release: 1.2
gdb_6_7-branch: 1.2.0.20
gdb_6_7-2007-09-07-branchpoint: 1.2
insight_6_6-20070208-release: 1.2
gdb_6_6-2006-12-18-release: 1.2
gdb_6_6-branch: 1.2.0.18
gdb_6_6-2006-11-15-branchpoint: 1.2
insight_6_5-20061003-release: 1.2
gdb-csl-symbian-6_4_50_20060226-12: 1.2
gdb-csl-sourcerygxx-3_4_4-25: 1.1.1.1
nickrob-async-20060828-mergepoint: 1.2
gdb-csl-symbian-6_4_50_20060226-11: 1.2
gdb-csl-sourcerygxx-4_1-17: 1.2
gdb-csl-20060226-branch-local-2: 1.2
gdb-csl-sourcerygxx-4_1-14: 1.2
gdb-csl-sourcerygxx-4_1-13: 1.2
gdb-csl-sourcerygxx-4_1-12: 1.2
gdb-csl-sourcerygxx-3_4_4-21: 1.2
gdb_6_5-20060621-release: 1.2
gdb-csl-sourcerygxx-4_1-9: 1.2
gdb-csl-sourcerygxx-4_1-8: 1.2
gdb-csl-sourcerygxx-4_1-7: 1.2
gdb-csl-arm-2006q1-6: 1.2
gdb-csl-sourcerygxx-4_1-6: 1.2
gdb-csl-symbian-6_4_50_20060226-10: 1.2
gdb-csl-symbian-6_4_50_20060226-9: 1.2
gdb-csl-symbian-6_4_50_20060226-8: 1.2
gdb-csl-coldfire-4_1-11: 1.2
gdb-csl-sourcerygxx-3_4_4-19: 1.2
gdb-csl-coldfire-4_1-10: 1.2
gdb_6_5-branch: 1.2.0.16
gdb_6_5-2006-05-14-branchpoint: 1.2
gdb-csl-sourcerygxx-4_1-5: 1.2
nickrob-async-20060513-branch: 1.2.0.14
nickrob-async-20060513-branchpoint: 1.2
gdb-csl-sourcerygxx-4_1-4: 1.2
msnyder-reverse-20060502-branch: 1.2.0.12
msnyder-reverse-20060502-branchpoint: 1.2
gdb-csl-morpho-4_1-4: 1.2
gdb-csl-sourcerygxx-3_4_4-17: 1.2
readline_5_1-import-branch: 1.2.0.10
readline_5_1-import-branchpoint: 1.2
gdb-csl-20060226-branch-merge-to-csl-symbian-1: 1.2
gdb-csl-symbian-20060226-branch: 1.2.0.8
gdb-csl-symbian-20060226-branchpoint: 1.2
gdb-csl-20060226-branch-merge-to-csl-local-1: 1.2
msnyder-reverse-20060331-branch: 1.2.0.6
msnyder-reverse-20060331-branchpoint: 1.2
gdb-csl-available-20060303-branch: 1.2.0.4
gdb-csl-available-20060303-branchpoint: 1.2
gdb-csl-20060226-branch: 1.2.0.2
gdb-csl-20060226-branchpoint: 1.2
gdb_6_4-20051202-release: 1.1.1.1
msnyder-fork-checkpoint-branch: 1.1.1.1.0.102
msnyder-fork-checkpoint-branchpoint: 1.1.1.1
gdb-csl-gxxpro-6_3-branch: 1.1.1.1.0.100
gdb-csl-gxxpro-6_3-branchpoint: 1.1.1.1
gdb_6_4-branch: 1.1.1.1.0.98
gdb_6_4-2005-11-01-branchpoint: 1.1.1.1
gdb-csl-arm-20051020-branch: 1.1.1.1.0.96
gdb-csl-arm-20051020-branchpoint: 1.1.1.1
msnyder-tracepoint-checkpoint-branch: 1.1.1.1.0.94
msnyder-tracepoint-checkpoint-branchpoint: 1.1.1.1
gdb-csl-arm-20050325-2005-q1b: 1.1.1.1
gdb-csl-arm-20050325-2005-q1a: 1.1.1.1
csl-arm-20050325-branch: 1.1.1.1.0.92
csl-arm-20050325-branchpoint: 1.1.1.1
gdb-post-i18n-errorwarning-20050211: 1.1.1.1
gdb-pre-i18n-errorwarning-20050211: 1.1.1.1
gdb_6_3-20041109-release: 1.1.1.1
gdb_6_3-branch: 1.1.1.1.0.88
gdb_6_3-20041019-branchpoint: 1.1.1.1
drow_intercu-merge-20040921: 1.1.1.1
drow_intercu-merge-20040915: 1.1.1.1
jimb-gdb_6_2-e500-branch: 1.1.1.1.0.90
jimb-gdb_6_2-e500-branchpoint: 1.1.1.1
gdb_6_2-20040730-release: 1.1.1.1
gdb_6_2-branch: 1.1.1.1.0.86
gdb_6_2-2004-07-10-gmt-branchpoint: 1.1.1.1
gdb_6_1_1-20040616-release: 1.1.1.1
gdb_6_1-2004-04-05-release: 1.1.1.1
drow_intercu-merge-20040402: 1.1.1.1
drow_intercu-merge-20040327: 1.1.1.1
ezannoni_pie-20040323-branch: 1.1.1.1.0.84
ezannoni_pie-20040323-branchpoint: 1.1.1.1
cagney_tramp-20040321-mergepoint: 1.1.1.1
cagney_tramp-20040309-branch: 1.1.1.1.0.82
cagney_tramp-20040309-branchpoint: 1.1.1.1
gdb_6_1-branch: 1.1.1.1.0.80
gdb_6_1-2004-03-01-gmt-branchpoint: 1.1.1.1
drow_intercu-20040221-branch: 1.1.1.1.0.78
drow_intercu-20040221-branchpoint: 1.1.1.1
cagney_bfdfile-20040213-branch: 1.1.1.1.0.76
cagney_bfdfile-20040213-branchpoint: 1.1.1.1
drow-cplus-merge-20040208: 1.1.1.1
carlton_dictionary-20040126-merge: 1.1.1.1
cagney_bigcore-20040122-branch: 1.1.1.1.0.74
cagney_bigcore-20040122-branchpoint: 1.1.1.1
drow-cplus-merge-20040113: 1.1.1.1
drow-cplus-merge-20031224: 1.1.1.1
drow-cplus-merge-20031220: 1.1.1.1
carlton_dictionary-20031215-merge: 1.1.1.1
drow-cplus-merge-20031214: 1.1.1.1
carlton-dictionary-20031111-merge: 1.1.1.1
gdb_6_0-2003-10-04-release: 1.1.1.1
kettenis_sparc-20030918-branch: 1.1.1.1.0.72
kettenis_sparc-20030918-branchpoint: 1.1.1.1
carlton_dictionary-20030917-merge: 1.1.1.1
ezannoni_pie-20030916-branchpoint: 1.1.1.1
ezannoni_pie-20030916-branch: 1.1.1.1.0.70
cagney_x86i386-20030821-branch: 1.1.1.1.0.68
cagney_x86i386-20030821-branchpoint: 1.1.1.1
carlton_dictionary-20030805-merge: 1.1.1.1
carlton_dictionary-20030627-merge: 1.1.1.1
gdb_6_0-branch: 1.1.1.1.0.66
gdb_6_0-2003-06-23-branchpoint: 1.1.1.1
jimb-ppc64-linux-20030613-branch: 1.1.1.1.0.64
jimb-ppc64-linux-20030613-branchpoint: 1.1.1.1
cagney_convert-20030606-branch: 1.1.1.1.0.62
cagney_convert-20030606-branchpoint: 1.1.1.1
cagney_writestrings-20030508-branch: 1.1.1.1.0.60
cagney_writestrings-20030508-branchpoint: 1.1.1.1
jimb-ppc64-linux-20030528-branch: 1.1.1.1.0.58
jimb-ppc64-linux-20030528-branchpoint: 1.1.1.1
carlton_dictionary-20030523-merge: 1.1.1.1
cagney_fileio-20030521-branch: 1.1.1.1.0.56
cagney_fileio-20030521-branchpoint: 1.1.1.1
kettenis_i386newframe-20030517-mergepoint: 1.1.1.1
jimb-ppc64-linux-20030509-branch: 1.1.1.1.0.54
jimb-ppc64-linux-20030509-branchpoint: 1.1.1.1
kettenis_i386newframe-20030504-mergepoint: 1.1.1.1
carlton_dictionary-20030430-merge: 1.1.1.1
kettenis_i386newframe-20030419-branch: 1.1.1.1.0.52
kettenis_i386newframe-20030419-branchpoint: 1.1.1.1
carlton_dictionary-20030416-merge: 1.1.1.1
cagney_frameaddr-20030409-mergepoint: 1.1.1.1
kettenis_i386newframe-20030406-branch: 1.1.1.1.0.50
kettenis_i386newframe-20030406-branchpoint: 1.1.1.1
cagney_frameaddr-20030403-branchpoint: 1.1.1.1
cagney_frameaddr-20030403-branch: 1.1.1.1.0.48
cagney_framebase-20030330-mergepoint: 1.1.1.1
cagney_framebase-20030326-branch: 1.1.1.1.0.46
cagney_framebase-20030326-branchpoint: 1.1.1.1
cagney_lazyid-20030317-branch: 1.1.1.1.0.44
cagney_lazyid-20030317-branchpoint: 1.1.1.1
kettenis-i386newframe-20030316-mergepoint: 1.1.1.1
offbyone-20030313-branch: 1.1.1.1.0.42
offbyone-20030313-branchpoint: 1.1.1.1
kettenis-i386newframe-20030308-branch: 1.1.1.1.0.40
kettenis-i386newframe-20030308-branchpoint: 1.1.1.1
carlton_dictionary-20030305-merge: 1.1.1.1
cagney_offbyone-20030303-branch: 1.1.1.1.0.38
cagney_offbyone-20030303-branchpoint: 1.1.1.1
carlton_dictionary-20030207-merge: 1.1.1.1
interps-20030203-mergepoint: 1.1.1.1
interps-20030202-branch: 1.1.1.1.0.36
interps-20030202-branchpoint: 1.1.1.1
cagney-unwind-20030108-branch: 1.1.1.1.0.34
cagney-unwind-20030108-branchpoint: 1.1.1.1
carlton_dictionary-20021223-merge: 1.1.1.1
gdb_5_3-2002-12-12-release: 1.1.1.1
carlton_dictionary-20021115-merge: 1.1.1.1
kseitz_interps-20021105-merge: 1.1.1.1
kseitz_interps-20021103-merge: 1.1.1.1
drow-cplus-merge-20021020: 1.1.1.1
drow-cplus-merge-20021025: 1.1.1.1
carlton_dictionary-20021025-merge: 1.1.1.1
carlton_dictionary-20021011-merge: 1.1.1.1
drow-cplus-branch: 1.1.1.1.0.32
drow-cplus-branchpoint: 1.1.1.1
kseitz_interps-20020930-merge: 1.1.1.1
carlton_dictionary-20020927-merge: 1.1.1.1
carlton_dictionary-branch: 1.1.1.1.0.30
carlton_dictionary-20020920-branchpoint: 1.1.1.1
gdb_5_3-branch: 1.1.1.1.0.28
gdb_5_3-2002-09-04-branchpoint: 1.1.1.1
kseitz_interps-20020829-merge: 1.1.1.1
cagney_sysregs-20020825-branch: 1.1.1.1.0.26
cagney_sysregs-20020825-branchpoint: 1.1.1.1
readline_4_3-import-branch: 1.1.1.1.0.24
readline_4_3-import-branchpoint: 1.1.1.1
gdb_5_2_1-2002-07-23-release: 1.1.1.1
kseitz_interps-20020528-branch: 1.1.1.1.0.22
kseitz_interps-20020528-branchpoint: 1.1.1.1
cagney_regbuf-20020515-branch: 1.1.1.1.0.20
cagney_regbuf-20020515-branchpoint: 1.1.1.1
jimb-macro-020506-branch: 1.1.1.1.0.18
jimb-macro-020506-branchpoint: 1.1.1.1
gdb_5_2-2002-04-29-release: 1.1.1.1
gdb_5_2-branch: 1.1.1.1.0.16
gdb_5_2-2002-03-03-branchpoint: 1.1.1.1
gdb_5_1_1-2002-01-24-release: 1.1.1.1
gdb_5_1_0_1-2002-01-03-release: 1.1.1.1
cygnus_cvs_20020108_pre: 1.1.1.1
gdb_5_1_0_1-2002-01-03-branchpoint: 1.1.1.1
gdb_5_1_0_1-2002-01-03-branch: 1.1.1.1.0.14
gdb_5_1-2001-11-21-release: 1.1.1.1
gdb_s390-2001-09-26-branch: 1.1.1.1.0.12
gdb_s390-2001-09-26-branchpoint: 1.1.1.1
gdb_5_1-2001-07-29-branch: 1.1.1.1.0.10
gdb_5_1-2001-07-29-branchpoint: 1.1.1.1
dberlin-typesystem-branch: 1.1.1.1.0.8
dberlin-typesystem-branchpoint: 1.1.1.1
gdb-post-ptid_t-2001-05-03: 1.1.1.1
gdb-pre-ptid_t-2001-05-03: 1.1.1.1
insight-precleanup-2001-01-01: 1.1.1.1
gdb-post-protoization-2000-07-29: 1.1.1.1
gdb-pre-protoization-2000-07-29: 1.1.1.1
gdb-premipsmulti-2000-06-06-branch: 1.1.1.1.0.6
gdb-premipsmulti-2000-06-06-branchpoint: 1.1.1.1
gdb-post-params-removal-2000-06-04: 1.1.1.1
gdb-pre-params-removal-2000-06-04: 1.1.1.1
gdb-post-params-removal-2000-05-28: 1.1.1.1
gdb-pre-params-removal-2000-05-28: 1.1.1.1
gdb_5_0-2000-05-19-release: 1.1.1.1
gdb_4_18_2-2000-05-18-release: 1.1.1.1
gdb_4_95_1-2000-05-11-snapshot: 1.1.1.1
gdb_4_95_0-2000-04-27-snapshot: 1.1.1.1
gdb_5_0-2000-04-10-branch: 1.1.1.1.0.4
gdb_5_0-2000-04-10-branchpoint: 1.1.1.1
repo-unification-2000-02-06: 1.1.1.1
insight-2000-02-04: 1.1.1.1
gdb-2000-02-04: 1.1.1.1
gdb-2000-02-02: 1.1.1.1
gdb-2000-02-01: 1.1.1.1
gdb-2000-01-31: 1.1.1.1
gdb-2000-01-26: 1.1.1.1
gdb-2000-01-24: 1.1.1.1
gdb-2000-01-17: 1.1.1.1
gdb-2000-01-10: 1.1.1.1
gdb-2000-01-05: 1.1.1.1
gdb-1999-12-21: 1.1.1.1
gdb-1999-12-13: 1.1.1.1
gdb-1999-12-07: 1.1.1.1
gdb-1999-12-06: 1.1.1.1
gdb-1999-11-16: 1.1.1.1
gdb-1999-11-08: 1.1.1.1
gdb-1999-11-01: 1.1.1.1
gdb-1999-10-25: 1.1.1.1
gdb-1999-10-18: 1.1.1.1
gdb-1999-10-11: 1.1.1.1
gdb-1999-10-04: 1.1.1.1
gdb-1999-09-28: 1.1.1.1
gdb-1999-09-21: 1.1.1.1
gdb-1999-09-13: 1.1.1.1
gdb-1999-09-08: 1.1.1.1
gdb-1999-08-30: 1.1.1.1
gdb-1999-08-23: 1.1.1.1
gdb-1999-08-16: 1.1.1.1
gdb-1999-08-09: 1.1.1.1
gdb-1999-08-02: 1.1.1.1
gdb-1999-07-26: 1.1.1.1
gdb-1999-07-19: 1.1.1.1
gdb-1999-07-12: 1.1.1.1
gdb-post-reformat-19990707: 1.1.1.1
gdb-1999-07-07-post-reformat-snapshot: 1.1.1.1
gdb-pre-reformat-19990707: 1.1.1.1
gdb-1999-07-07: 1.1.1.1
gdb-1999-07-05: 1.1.1.1
gdb-1999-06-28: 1.1.1.1
gdb-1999-06-21: 1.1.1.1
gdb-1999-06-14: 1.1.1.1
gdb-1999-06-07: 1.1.1.1
gdb-1999-06-01: 1.1.1.1
gdb-4_18-branch: 1.1.1.1.0.2
gdb-4_18-release: 1.1.1.1
gdb-1999-05-25: 1.1.1.1
gdb-1999-05-19: 1.1.1.1
gdb-1999-05-10: 1.1.1.1
gdb-19990504: 1.1.1.1
gdb-19990422: 1.1.1.1
SNAPSHOT: 1.1.1
gdb-4_18: 1.1.1.1
GDB_4_18: 1.1.1
keyword substitution: o
total revisions: 5; selected revisions: 5
description:
----------------------------
revision 1.3
date: 2009/12/21 07:40:04; author: brobecke; state: Exp; lines: +624 -292
* COPYING: Update to GPL version 3.
----------------------------
revision 1.2
date: 2005/12/17 22:33:58; author: eliz; state: Exp; lines: +4 -2
branches: 1.2.42;
* breakpoint.c:
* arm-tdep.c:
* ia64-tdep.c:
* i386-tdep.c:
* hpread.c:
* hppa-tdep.c:
* hppa-hpux-tdep.c:
* gnu-nat.c:
* gdbtypes.c:
* gdbarch.h:
* gdbarch.c:
* eval.c:
* dwarf2read.c:
* dbxread.c:
* copying:
* symfile.c:
* stabsread.c:
* sh64-tdep.c:
* sh-tdep.c:
* s390-tdep.c:
* rs6000-tdep.c:
* remote.c:
* remote-mips.c:
* mips-tdep.c:
* mdebugread.c:
* linux-nat.c:
* infrun.c:
* xcoffread.c:
* win32-nat.c:
* valops.c:
* utils.c:
* tracepoint.c:
* target.c:
* symtab.c:
* c-exp.y:
* ada-valprint.c:
* ada-typeprint.c:
* ada-lex.l:
* ada-lang.h:
* ada-lang.c:
* ada-exp.y:
* alphafbsd-tdep.c:
* alphabsd-tdep.h:
* alphabsd-tdep.c:
* alphabsd-nat.c:
* alpha-tdep.h:
* alpha-tdep.c:
* alpha-osf1-tdep.c:
* alpha-nat.c:
* alpha-mdebug-tdep.c:
* alpha-linux-tdep.c:
* alpha-linux-nat.c:
* aix-thread.c:
* abug-rom.c:
* arch-utils.c:
* annotate.h:
* annotate.c:
* amd64obsd-tdep.c:
* amd64obsd-nat.c:
* amd64nbsd-tdep.c:
* amd64nbsd-nat.c:
* amd64fbsd-tdep.c:
* amd64fbsd-nat.c:
* amd64bsd-nat.c:
* amd64-tdep.h:
* amd64-tdep.c:
* amd64-sol2-tdep.c:
* amd64-nat.h:
* amd64-nat.c:
* amd64-linux-tdep.c:
* amd64-linux-nat.c:
* alphanbsd-tdep.c:
* block.h:
* block.c:
* bfd-target.h:
* bfd-target.c:
* bcache.h:
* bcache.c:
* ax.h:
* ax-general.c:
* ax-gdb.h:
* ax-gdb.c:
* avr-tdep.c:
* auxv.h:
* auxv.c:
* armnbsd-tdep.c:
* armnbsd-nat.c:
* arm-tdep.h:
* arm-linux-nat.c:
* arch-utils.h:
* charset.c:
* call-cmds.h:
* c-valprint.c:
* c-typeprint.c:
* c-lang.h:
* c-lang.c:
* buildsym.h:
* buildsym.c:
* bsd-uthread.h:
* bsd-uthread.c:
* bsd-kvm.h:
* bsd-kvm.c:
* breakpoint.h:
* core-regset.c:
* core-aout.c:
* completer.h:
* completer.c:
* complaints.h:
* complaints.c:
* command.h:
* coffread.c:
* coff-solib.h:
* coff-solib.c:
* coff-pe-read.h:
* coff-pe-read.c:
* cli-out.h:
* cli-out.c:
* charset.h:
* dink32-rom.c:
* dictionary.h:
* dictionary.c:
* demangle.c:
* defs.h:
* dcache.h:
* dcache.c:
* d10v-tdep.c:
* cpu32bug-rom.c:
* cp-valprint.c:
* cp-support.h:
* cp-support.c:
* cp-namespace.c:
* cp-abi.h:
* cp-abi.c:
* corelow.c:
* corefile.c:
* environ.c:
* elfread.c:
* dwarfread.c:
* dwarf2loc.c:
* dwarf2expr.h:
* dwarf2expr.c:
* dwarf2-frame.h:
* dwarf2-frame.c:
* dve3900-rom.c:
* dummy-frame.h:
* dummy-frame.c:
* dsrec.c:
* doublest.h:
* doublest.c:
* disasm.h:
* disasm.c:
* fork-child.c:
* findvar.c:
* fbsd-nat.h:
* fbsd-nat.c:
* f-valprint.c:
* f-typeprint.c:
* f-lang.h:
* f-lang.c:
* expression.h:
* expprint.c:
* exec.h:
* exec.c:
* exceptions.h:
* exceptions.c:
* event-top.h:
* event-top.c:
* event-loop.h:
* event-loop.c:
* gdb.c:
* gdb-stabs.h:
* gdb-events.h:
* gdb-events.c:
* gcore.c:
* frv-tdep.h:
* frv-tdep.c:
* frv-linux-tdep.c:
* frame.h:
* frame.c:
* frame-unwind.h:
* frame-unwind.c:
* frame-base.h:
* frame-base.c:
* gdb_vfork.h:
* gdb_thread_db.h:
* gdb_string.h:
* gdb_stat.h:
* gdb_regex.h:
* gdb_ptrace.h:
* gdb_proc_service.h:
* gdb_obstack.h:
* gdb_locale.h:
* gdb_dirent.h:
* gdb_curses.h:
* gdb_assert.h:
* gdbarch.sh:
* gdb.h:
* hpux-thread.c:
* hppabsd-nat.c:
* hppa-tdep.h:
* hpacc-abi.c:
* h8300-tdep.c:
* gregset.h:
* go32-nat.c:
* gnu-v3-abi.c:
* gnu-v2-abi.h:
* gnu-v2-abi.c:
* gnu-nat.h:
* glibc-tdep.c:
* gdbtypes.h:
* gdbcore.h:
* gdbcmd.h:
* i386nbsd-tdep.c:
* i386nbsd-nat.c:
* i386gnu-tdep.c:
* i386gnu-nat.c:
* i386fbsd-tdep.c:
* i386fbsd-nat.c:
* i386bsd-tdep.c:
* i386bsd-nat.h:
* i386bsd-nat.c:
* i386-tdep.h:
* i386-sol2-nat.c:
* i386-nto-tdep.c:
* i386-nat.c:
* i386-linux-tdep.h:
* i386-linux-tdep.c:
* i386-linux-nat.c:
* i386-cygwin-tdep.c:
* inf-ttrace.c:
* inf-ptrace.h:
* inf-ptrace.c:
* inf-loop.h:
* inf-loop.c:
* inf-child.h:
* inf-child.c:
* ia64-tdep.h:
* ia64-linux-nat.c:
* i387-tdep.h:
* i387-tdep.c:
* i386v4-nat.c:
* i386v-nat.c:
* i386obsd-tdep.c:
* i386obsd-nat.c:
* kod.c:
* jv-valprint.c:
* jv-typeprint.c:
* jv-lang.h:
* jv-lang.c:
* irix5-nat.c:
* iq2000-tdep.c:
* interps.h:
* interps.c:
* inftarg.c:
* inflow.h:
* inflow.c:
* inferior.h:
* infcmd.c:
* infcall.h:
* infcall.c:
* inf-ttrace.h:
* m32r-tdep.h:
* m32r-tdep.c:
* m32r-rom.c:
* m32r-linux-tdep.c:
* m32r-linux-nat.c:
* m2-valprint.c:
* m2-typeprint.c:
* m2-lang.h:
* m2-lang.c:
* lynx-nat.c:
* linux-thread-db.c:
* linux-nat.h:
* linespec.c:
* libunwind-frame.h:
* libunwind-frame.c:
* language.h:
* language.c:
* macroexp.c:
* macrocmd.c:
* m88kbsd-nat.c:
* m88k-tdep.h:
* m88k-tdep.c:
* m68klinux-tdep.c:
* m68klinux-nat.c:
* m68kbsd-tdep.c:
* m68kbsd-nat.c:
* m68k-tdep.h:
* m68k-tdep.c:
* mips-linux-nat.c:
* mips-irix-tdep.c:
* minsyms.c:
* memattr.h:
* memattr.c:
* mem-break.c:
* mdebugread.h:
* main.h:
* main.c:
* macrotab.h:
* macrotab.c:
* macroscope.h:
* macroscope.c:
* macroexp.h:
* nbsd-tdep.c:
* mt-tdep.c:
* monitor.h:
* monitor.c:
* mn10300-tdep.h:
* mn10300-tdep.c:
* mn10300-linux-tdep.c:
* mipsv4-nat.c:
* mipsread.c:
* mipsnbsd-tdep.h:
* mipsnbsd-tdep.c:
* mipsnbsd-nat.c:
* mips64obsd-tdep.c:
* mips64obsd-nat.c:
* mips-tdep.h:
* mips-mdebug-tdep.c:
* mips-linux-tdep.c:
* osabi.h:
* osabi.c:
* ocd.h:
* ocd.c:
* observer.c:
* objfiles.h:
* objfiles.c:
* objc-lang.h:
* objc-lang.c:
* objc-exp.y:
* nto-tdep.h:
* nto-tdep.c:
* nto-procfs.c:
* nlmread.c:
* nbsd-tdep.h:
* ppcobsd-tdep.c:
* ppcobsd-nat.c:
* ppcnbsd-tdep.h:
* ppcnbsd-tdep.c:
* ppcnbsd-nat.c:
* ppcbug-rom.c:
* ppc-tdep.h:
* ppc-sysv-tdep.c:
* ppc-linux-tdep.c:
* ppc-linux-nat.c:
* ppc-bdm.c:
* parser-defs.h:
* parse.c:
* p-valprint.c:
* p-typeprint.c:
* p-lang.h:
* p-lang.c:
* remote-fileio.h:
* remote-fileio.c:
* remote-est.c:
* remote-e7000.c:
* regset.h:
* regset.c:
* reggroups.h:
* reggroups.c:
* regcache.h:
* regcache.c:
* proc-why.c:
* proc-service.c:
* proc-events.c:
* printcmd.c:
* ppcobsd-tdep.h:
* sentinel-frame.h:
* sentinel-frame.c:
* scm-valprint.c:
* scm-tags.h:
* scm-lang.h:
* scm-lang.c:
* scm-exp.c:
* s390-tdep.h:
* rom68k-rom.c:
* remote.h:
* remote-utils.c:
* remote-st.c:
* remote-sim.c:
* remote-sds.c:
* remote-rdp.c:
* remote-rdi.c:
* remote-hms.c:
* sim-regno.h:
* shnbsd-tdep.h:
* shnbsd-tdep.c:
* shnbsd-nat.c:
* sh-tdep.h:
* serial.h:
* serial.c:
* ser-unix.h:
* ser-unix.c:
* ser-tcp.c:
* ser-pipe.c:
* ser-go32.c:
* ser-e7kpc.c:
* ser-base.h:
* ser-base.c:
* solib.c:
* solib-svr4.h:
* solib-svr4.c:
* solib-sunos.c:
* solib-som.h:
* solib-som.c:
* solib-pa64.h:
* solib-pa64.c:
* solib-osf.c:
* solib-null.c:
* solib-legacy.c:
* solib-irix.c:
* solib-frv.c:
* solib-aix5.c:
* sol-thread.c:
* sparc64-linux-tdep.c:
* sparc64-linux-nat.c:
* sparc-tdep.h:
* sparc-tdep.c:
* sparc-sol2-tdep.c:
* sparc-sol2-nat.c:
* sparc-nat.h:
* sparc-nat.c:
* sparc-linux-tdep.c:
* sparc-linux-nat.c:
* source.h:
* source.c:
* somread.c:
* solist.h:
* solib.h:
* std-regs.c:
* stack.h:
* stack.c:
* stabsread.h:
* sparcobsd-tdep.c:
* sparcnbsd-tdep.c:
* sparcnbsd-nat.c:
* sparc64obsd-tdep.c:
* sparc64nbsd-tdep.c:
* sparc64nbsd-nat.c:
* sparc64fbsd-tdep.c:
* sparc64fbsd-nat.c:
* sparc64-tdep.h:
* sparc64-tdep.c:
* sparc64-sol2-tdep.c:
* sparc64-nat.c:
* ui-file.c:
* typeprint.h:
* typeprint.c:
* tramp-frame.h:
* tramp-frame.c:
* trad-frame.h:
* trad-frame.c:
* tracepoint.h:
* top.c:
* tobs.inc:
* thread.c:
* terminal.h:
* target.h:
* symfile.h:
* stop-gdb.c:
* vaxbsd-nat.c:
* vax-tdep.h:
* vax-tdep.c:
* vax-nat.c:
* varobj.h:
* varobj.c:
* value.h:
* value.c:
* valprint.h:
* valprint.c:
* v850-tdep.c:
* uw-thread.c:
* user-regs.c:
* ui-out.h:
* ui-out.c:
* ui-file.h:
* xcoffsolib.h:
* xcoffsolib.c:
* wrapper.c:
* wince.c:
* wince-stub.h:
* wince-stub.c:
* vaxobsd-tdep.c:
* vaxnbsd-tdep.c:
* gdb_gcore.sh:
* copying.c:
* configure.ac:
* aclocal.m4:
* acinclude.m4:
* reply_mig_hack.awk:
* observer.sh:
* gdb_mbuild.sh:
* arm-linux-tdep.c:
* blockframe.c:
* dbug-rom.c:
* environ.h:
* dwarf2loc.h:
* gdb-events.sh:
* glibc-tdep.h:
* gdb_wait.h:
* gdbthread.h:
* i386-sol2-tdep.c:
* hppabsd-tdep.c:
* hppa-linux-nat.c:
* hppa-hpux-nat.c:
* ia64-linux-tdep.c:
* infptrace.c:
* linespec.h:
* maint.c:
* mips-mdebug-tdep.h:
* remote-m32r-sdi.c:
* s390-nat.c:
* rs6000-nat.c:
* remote-utils.h:
* sh3-rom.c:
* sh-linux-tdep.c:
* top.h:
* symtab.h:
* symmisc.c:
* symfile-mem.c:
* srec.h:
* user-regs.h:
* version.h:
* valarith.c:
* xstormy16-tdep.c:
* wrapper.h:
* Makefile.in:
* f-exp.y:
* cris-tdep.c:
* cp-name-parser.y:
* procfs.c:
* proc-utils.h:
* proc-flags.c:
* proc-api.c:
* p-exp.y:
* m68hc11-tdep.c:
* m2-exp.y:
* kod.h:
* kod-cisco.c:
* jv-exp.y:
* hppa-linux-tdep.c: Add (c) after Copyright. Update the FSF
address.
----------------------------
revision 1.1
date: 1999/04/16 01:33:57; author: shebs; state: Exp;
branches: 1.1.1;
Initial revision
----------------------------
revision 1.1.1.1
date: 1999/04/16 01:33:57; author: shebs; state: Exp; lines: +0 -0
Initial creation of sourceware repository
----------------------------
revision 1.2.42.1
date: 2009/12/21 07:43:55; author: brobecke; state: Exp; lines: +624 -292
* COPYING: Update to GPL version 3.
=============================================================================
RCS file: /cvs/src/src/gdb/ChangeLog,v
Working file: ChangeLog
head: 1.15798
branch:
locks: strict
access list:
symbolic names:
gdb_7_6-2013-04-26-release: 1.15260.2.48
gdb_7_6-branch: 1.15260.0.2
gdb_7_6-2013-03-12-branchpoint: 1.15260
gdb_7_5_1-2012-11-29-release: 1.14469.2.40
gdb_7_5-2012-08-17-release: 1.14469.2.23
gdb_7_5-branch: 1.14469.0.2
gdb_7_5-2012-07-18-branchpoint: 1.14469
gdb_7_4_1-2012-04-26-release: 1.13614.2.54
gdb_7_4-2012-01-24-release: 1.13614.2.42
gdb_7_4-branch: 1.13614.0.2
gdb_7_4-2011-12-13-branchpoint: 1.13614
gdb_7_3_1-2011-09-04-release: 1.12887.2.70
gdb_7_3-2011-07-26-release: 1.12887.2.64
gdb_7_3-branch: 1.12887.0.2
gdb_7_3-2011-04-01-branchpoint: 1.12887
gdb_7_2-2010-09-02-release: 1.11973.2.42
gdb_7_2-branch: 1.11973.0.2
gdb_7_2-2010-07-07-branchpoint: 1.11973
gdb_7_1-2010-03-18-release: 1.11378.2.33
gdb_7_1-branch: 1.11378.0.2
gdb_7_1-2010-02-18-branchpoint: 1.11378
gdb_7_0_1-2009-12-22-release: 1.10874.2.60
gdb_7_0-2009-10-06-release: 1.10874.2.46
gdb_7_0-branch: 1.10874.0.2
gdb_7_0-2009-09-16-branchpoint: 1.10874
arc-sim-20090309: 1.9174.2.17.4.1
msnyder-checkpoint-072509-branch: 1.10747.0.2
msnyder-checkpoint-072509-branchpoint: 1.10747
arc-insight_6_8-branch: 1.9174.2.17.0.4
arc-insight_6_8-branchpoint: 1.9174.2.17
insight_6_8-branch: 1.9174.2.17.0.2
insight_6_8-branchpoint: 1.9174.2.17
reverse-20081226-branch: 1.10052.0.2
reverse-20081226-branchpoint: 1.10052
multiprocess-20081120-branch: 1.9991.0.2
multiprocess-20081120-branchpoint: 1.9991
reverse-20080930-branch: 1.9859.0.2
reverse-20080930-branchpoint: 1.9859
reverse-20080717-branch: 1.9579.0.2
reverse-20080717-branchpoint: 1.9579
msnyder-reverse-20080609-branch: 1.9466.0.2
msnyder-reverse-20080609-branchpoint: 1.9466
drow-reverse-20070409-branch: 1.8264.0.2
drow-reverse-20070409-branchpoint: 1.8264
gdb_6_8-2008-03-27-release: 1.9174.2.17
gdb_6_8-branch: 1.9174.0.2
gdb_6_8-2008-02-26-branchpoint: 1.9174
gdb_6_7_1-2007-10-29-release: 1.8684.2.30
gdb_6_7-2007-10-10-release: 1.8684.2.19
gdb_6_7-branch: 1.8684.0.2
gdb_6_7-2007-09-07-branchpoint: 1.8684
insight_6_6-20070208-release: 1.7962.2.20
gdb_6_6-2006-12-18-release: 1.7962.2.19
gdb_6_6-branch: 1.7962.0.2
gdb_6_6-2006-11-15-branchpoint: 1.7962
insight_6_5-20061003-release: 1.7738.2.19
gdb-csl-symbian-6_4_50_20060226-12: 1.7617.2.2
gdb-csl-sourcerygxx-3_4_4-25: 1.7432
nickrob-async-20060828-mergepoint: 1.7891
gdb-csl-symbian-6_4_50_20060226-11: 1.7617.2.2
2013-08-12 13:54:04 +02:00
#
# Test break via convenience variable with file name
#
set line [gdb_get_line_number "set breakpoint 1 here"]
gdb_test_no_output "set \$l = $line"
gdb_breakpoint ${srcfile}:\$l
gdb_test_no_output "set \$foo=81.5" \
"set convenience variable \$foo to 81.5"
gdb_test "break $srcfile:\$foo" \
"Convenience variables used in line specs must have integer values.*" \
"set breakpoint via non-integer convenience variable disallowed"