binutils-gdb/sim/arm/arminit.c

295 lines
9.4 KiB
C
Raw Normal View History

/* arminit.c -- ARMulator initialization: ARM6 Instruction Emulator.
Copyright (C) 1994 Advanced RISC Machines Ltd.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "armdefs.h"
#include "armemu.h"
/***************************************************************************\
* Definitions for the emulator architecture *
\***************************************************************************/
void ARMul_EmulateInit(void) ;
ARMul_State *ARMul_NewState(void) ;
void ARMul_Reset(ARMul_State *state) ;
ARMword ARMul_DoCycle(ARMul_State *state) ;
unsigned ARMul_DoCoPro(ARMul_State *state) ;
ARMword ARMul_DoProg(ARMul_State *state) ;
ARMword ARMul_DoInstr(ARMul_State *state) ;
void ARMul_Abort(ARMul_State *state, ARMword address) ;
unsigned ARMul_MultTable[32] = {1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,
10,10,11,11,12,12,13,13,14,14,15,15,16,16,16} ;
ARMword ARMul_ImmedTable[4096] ; /* immediate DP LHS values */
char ARMul_BitList[256] ; /* number of bits in a byte table */
/***************************************************************************\
* Call this routine once to set up the emulator's tables. *
\***************************************************************************/
void ARMul_EmulateInit(void)
{unsigned long i, j ;
for (i = 0 ; i < 4096 ; i++) { /* the values of 12 bit dp rhs's */
ARMul_ImmedTable[i] = ROTATER(i & 0xffL,(i >> 7L) & 0x1eL) ;
}
for (i = 0 ; i < 256 ; ARMul_BitList[i++] = 0 ) ; /* how many bits in LSM */
for (j = 1 ; j < 256 ; j <<= 1)
for (i = 0 ; i < 256 ; i++)
if ((i & j) > 0 )
ARMul_BitList[i]++ ;
for (i = 0 ; i < 256 ; i++)
ARMul_BitList[i] *= 4 ; /* you always need 4 times these values */
}
/***************************************************************************\
* Returns a new instantiation of the ARMulator's state *
\***************************************************************************/
ARMul_State *ARMul_NewState(void)
{ARMul_State *state ;
unsigned i, j ;
state = (ARMul_State *)malloc(sizeof(ARMul_State)) ;
memset (state, 0, sizeof (ARMul_State));
state->Emulate = RUN ;
for (i = 0 ; i < 16 ; i++) {
state->Reg[i] = 0 ;
for (j = 0 ; j < 7 ; j++)
state->RegBank[j][i] = 0 ;
}
for (i = 0 ; i < 7 ; i++)
state->Spsr[i] = 0 ;
state->Mode = 0 ;
state->CallDebug = FALSE ;
state->Debug = FALSE ;
state->VectorCatch = 0 ;
state->Aborted = FALSE ;
state->Reseted = FALSE ;
state->Inted = 3 ;
state->LastInted = 3 ;
state->MemDataPtr = NULL ;
state->MemInPtr = NULL ;
state->MemOutPtr = NULL ;
state->MemSparePtr = NULL ;
state->MemSize = 0 ;
state->OSptr = NULL ;
state->CommandLine = NULL ;
state->EventSet = 0 ;
state->Now = 0 ;
state->EventPtr = (struct EventNode **)malloc((unsigned)EVENTLISTSIZE *
sizeof(struct EventNode *)) ;
for (i = 0 ; i < EVENTLISTSIZE ; i++)
*(state->EventPtr + i) = NULL ;
#ifdef ARM61
state->prog32Sig = LOW ;
state->data32Sig = LOW ;
#else
state->prog32Sig = HIGH ;
state->data32Sig = HIGH ;
#endif
state->lateabtSig = LOW ;
state->bigendSig = LOW ;
ARMul_Reset(state) ;
return(state) ;
}
/***************************************************************************\
* Call this routine to set ARMulator to model a certain processor *
\***************************************************************************/
void ARMul_SelectProcessor(ARMul_State *state, unsigned processor) {
if (processor & ARM_Fix26_Prop) {
state->prog32Sig = LOW;
state->data32Sig = LOW;
}else{
state->prog32Sig = HIGH;
state->data32Sig = HIGH;
}
state->lateabtSig = LOW;
}
/***************************************************************************\
* Call this routine to set up the initial machine state (or perform a RESET *
\***************************************************************************/
void ARMul_Reset(ARMul_State *state)
{state->NextInstr = 0 ;
if (state->prog32Sig) {
state->Reg[15] = 0 ;
state->Cpsr = INTBITS | SVC32MODE ;
}
else {
state->Reg[15] = R15INTBITS | SVC26MODE ;
state->Cpsr = INTBITS | SVC26MODE ;
}
ARMul_CPSRAltered(state) ;
state->Bank = SVCBANK ;
FLUSHPIPE ;
state->EndCondition = 0 ;
state->ErrorCode = 0 ;
state->Exception = FALSE ;
state->NresetSig = HIGH ;
state->NfiqSig = HIGH ;
state->NirqSig = HIGH ;
state->NtransSig = (state->Mode & 3)?HIGH:LOW ;
state->abortSig = LOW ;
state->AbortAddr = 1 ;
state->NumInstrs = 0 ;
state->NumNcycles = 0 ;
state->NumScycles = 0 ;
state->NumIcycles = 0 ;
state->NumCcycles = 0 ;
state->NumFcycles = 0 ;
#ifdef ASIM
(void)ARMul_MemoryInit() ;
ARMul_OSInit(state) ;
#endif
}
/***************************************************************************\
* Emulate the execution of an entire program. Start the correct emulator *
* (Emulate26 for a 26 bit ARM and Emulate32 for a 32 bit ARM), return the *
* address of the last instruction that is executed. *
\***************************************************************************/
ARMword ARMul_DoProg(ARMul_State *state)
{ARMword pc = 0 ;
state->Emulate = RUN ;
while (state->Emulate != STOP) {
state->Emulate = RUN ;
if (state->prog32Sig && ARMul_MODE32BIT)
pc = ARMul_Emulate32(state) ;
else
pc = ARMul_Emulate26(state) ;
}
return(pc) ;
}
/***************************************************************************\
* Emulate the execution of one instruction. Start the correct emulator *
* (Emulate26 for a 26 bit ARM and Emulate32 for a 32 bit ARM), return the *
* address of the instruction that is executed. *
\***************************************************************************/
ARMword ARMul_DoInstr(ARMul_State *state)
{ARMword pc = 0 ;
state->Emulate = ONCE ;
if (state->prog32Sig && ARMul_MODE32BIT)
pc = ARMul_Emulate32(state) ;
else
pc = ARMul_Emulate26(state) ;
return(pc) ;
}
/***************************************************************************\
* This routine causes an Abort to occur, including selecting the correct *
* mode, register bank, and the saving of registers. Call with the *
* appropriate vector's memory address (0,4,8 ....) *
\***************************************************************************/
void ARMul_Abort(ARMul_State *state, ARMword vector)
{ARMword temp ;
state->Aborted = FALSE ;
if (ARMul_OSException(state,vector,ARMul_GetPC(state)))
return ;
if (state->prog32Sig)
if (ARMul_MODE26BIT)
temp = R15PC ;
else
temp = state->Reg[15] ;
else
temp = R15PC | ECC | ER15INT | EMODE ;
switch (vector) {
case ARMul_ResetV : /* RESET */
state->Spsr[SVCBANK] = CPSR ;
SETABORT(INTBITS,state->prog32Sig?SVC32MODE:SVC26MODE) ;
ARMul_CPSRAltered(state) ;
state->Reg[14] = temp ;
break ;
case ARMul_UndefinedInstrV : /* Undefined Instruction */
state->Spsr[state->prog32Sig?UNDEFBANK:SVCBANK] = CPSR ;
SETABORT(IBIT,state->prog32Sig?UNDEF32MODE:SVC26MODE) ;
ARMul_CPSRAltered(state) ;
state->Reg[14] = temp - 4 ;
break ;
case ARMul_SWIV : /* Software Interrupt */
state->Spsr[SVCBANK] = CPSR ;
SETABORT(IBIT,state->prog32Sig?SVC32MODE:SVC26MODE) ;
ARMul_CPSRAltered(state) ;
state->Reg[14] = temp - 4 ;
break ;
case ARMul_PrefetchAbortV : /* Prefetch Abort */
state->AbortAddr = 1 ;
state->Spsr[state->prog32Sig?ABORTBANK:SVCBANK] = CPSR ;
SETABORT(IBIT,state->prog32Sig?ABORT32MODE:SVC26MODE) ;
ARMul_CPSRAltered(state) ;
state->Reg[14] = temp - 4 ;
break ;
case ARMul_DataAbortV : /* Data Abort */
state->Spsr[state->prog32Sig?ABORTBANK:SVCBANK] = CPSR ;
SETABORT(IBIT,state->prog32Sig?ABORT32MODE:SVC26MODE) ;
ARMul_CPSRAltered(state) ;
state->Reg[14] = temp - 4 ; /* the PC must have been incremented */
break ;
case ARMul_AddrExceptnV : /* Address Exception */
state->Spsr[SVCBANK] = CPSR ;
SETABORT(IBIT,SVC26MODE) ;
ARMul_CPSRAltered(state) ;
state->Reg[14] = temp - 4 ;
break ;
case ARMul_IRQV : /* IRQ */
state->Spsr[IRQBANK] = CPSR ;
SETABORT(IBIT,state->prog32Sig?IRQ32MODE:IRQ26MODE) ;
ARMul_CPSRAltered(state) ;
state->Reg[14] = temp - 4 ;
break ;
case ARMul_FIQV : /* FIQ */
state->Spsr[FIQBANK] = CPSR ;
SETABORT(INTBITS,state->prog32Sig?FIQ32MODE:FIQ26MODE) ;
ARMul_CPSRAltered(state) ;
state->Reg[14] = temp - 4 ;
break ;
}
if (ARMul_MODE32BIT)
ARMul_SetR15(state,vector) ;
else
ARMul_SetR15(state,R15CCINTMODE | vector) ;
}