binutils-gdb/gdb/testsuite/gdb.base/foll-vfork.exp

#   Copyright 1997, 1999, 2007-2012 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

if { [is_remote target] || ![isnative] } then {
    continue
}

# Until "set follow-fork-mode" and "catch vfork" are implemented on
# other targets...
#
if {![istarget "hppa*-hp-hpux*"] && ![istarget "*-linux*"]} then {
    continue
}

# Test to see if we are on an HP-UX 10.20 and if so,
# do not run these tests as catching vfork is disabled for
# 10.20.

if [istarget "hppa*-hp-hpux10.20"] then {
    return 0
}

# NOTE drow/2002-12-06: I don't know what the referenced kernel problem
# is, but it appears to be fixed in recent HP/UX versions.

##if [istarget "hppa2.0w-hp-hpux*"] {
##  warning "Don't run gdb.base/foll-vfork.exp until JAGaa43495 kernel problem is fixed."
##  return 0
##}

standard_testfile

if {[build_executable $testfile.exp $testfile $srcfile {debug}] == -1} {
    untested "failed to compile $testfile"
    return -1
}

set testfile2 "vforked-prog"
set srcfile2 ${testfile2}.c

if {[build_executable $testfile.exp $testfile2 $srcfile2 {debug}] == -1} {
    untested "failed to compile $testfile2"
    return -1
}

# A few of these tests require a little more time than the standard
# timeout allows.
set oldtimeout $timeout
set timeout [expr "$timeout + 10"]

proc check_vfork_catchpoints {} {
  global gdb_prompt
  global has_vfork_catchpoints

  # Verify that the system supports "catch vfork".
  gdb_test "catch vfork" "Catchpoint \[0-9\]* \\(vfork\\)" "insert first vfork catchpoint"
  set has_vfork_catchpoints 0
  gdb_test_multiple "continue" "continue to first vfork catchpoint" {
    -re ".*Your system does not support this type\r\nof catchpoint.*$gdb_prompt $" {
      unsupported "continue to first vfork catchpoint"
    }
    -re ".*Catchpoint.*$gdb_prompt $" {
      set has_vfork_catchpoints 1
      pass "continue to first vfork catchpoint"
    }
  }

  if {$has_vfork_catchpoints == 0} {
    unsupported "vfork catchpoints"
    return -code return
  }
}

proc vfork_parent_follow_through_step {} {
  with_test_prefix "vfork parent follow, through step" {
   global gdb_prompt

   gdb_test_no_output "set follow-fork parent"

   set test "step"
   gdb_test_multiple "next" $test {
       -re "Detaching after fork from.*if \\(pid == 0\\).*$gdb_prompt " {
	   pass $test
       }
   }
   # The child has been detached; allow time for any output it might
   # generate to arrive, so that output doesn't get confused with
   # any gdb_expected debugger output from a subsequent testpoint.
   #
   exec sleep 1
}}

proc vfork_parent_follow_to_bp {} {
  with_test_prefix "vfork parent follow, to bp" {
   global gdb_prompt
   global srcfile

   gdb_test_no_output "set follow-fork parent"

   set bp_location [gdb_get_line_number "printf (\"I'm the proud parent of child"]
   gdb_test "break ${srcfile}:${bp_location}" ".*" "break, vfork to bp"

   set test "continue to bp"
   gdb_test_multiple "continue" $test {
       -re ".*Detaching after fork from child process.*Breakpoint.*${bp_location}.*$gdb_prompt " {
	   pass $test
       }
   }
   # The child has been detached; allow time for any output it might
   # generate to arrive, so that output doesn't get confused with
   # any expected debugger output from a subsequent testpoint.
   #
   exec sleep 1
}}

# Kill child and reload symbols.
proc kill_child {} {
   global binfile
   global gdb_prompt

   set test "killing inferior"
   gdb_test_multiple "kill" $test {
      -re ".*Kill the program being debugged.*y or n. $" {
         gdb_test_no_output "y" ""
         set test2 "file $binfile"
         gdb_test_multiple "file $binfile" $test2 {
            -re ".*Load new symbol table from.*y or n. $" {
               send_gdb "y\n"
               gdb_test_multiple "" "loading symbols" {
                  -re "Reading symbols from.*$gdb_prompt $" {
		  }
               }
            }
            -re ".*gdb_prompt $" {
	    }
          }
      }
      -re ".*$gdb_prompt $" {
      }
    }
}

proc vfork_and_exec_child_follow_to_main_bp {} {
  with_test_prefix "vfork and exec child follow, to main bp" {
   global gdb_prompt
   global srcfile2

   gdb_test_no_output "set follow-fork child"

   set linenum [gdb_get_line_number "printf(\"Hello from vforked-prog" ${srcfile2}]

   set test "continue to bp"
   gdb_test_multiple "continue" $test {
      -re "Attaching after.* vfork to.*xecuting new program.*Breakpoint.*vforked-prog.c:${linenum}.*$gdb_prompt " {
	  pass $test
      }
   }
   # The parent has been detached; allow time for any output it might
   # generate to arrive, so that output doesn't get confused with
   # any gdb_expected debugger output from a subsequent testpoint.
   #
   exec sleep 1

   # Explicitly kill this child, or a subsequent rerun actually runs
   # the exec'd child, not the original program...
   kill_child
}}

proc vfork_and_exec_child_follow_through_step {} {
  with_test_prefix "vfork and exec child follow, through step" {
   global gdb_prompt
   global srcfile2

   if { [istarget "hppa*-*-hpux*"] && ![istarget "hppa*-*-hpux11.*"] } {
      # This test cannot be performed prior to HP-UX 10.30, because
      # ptrace-based debugging of a vforking program basically doesn't
      # allow the child to do things like hit a breakpoint between a
      # vfork and exec.  This means that saying "set follow-fork
      # child; next" at a vfork() call won't work, because the
      # implementation of "next" sets a "step resume" breakpoint at
      # the return from the vfork(), which the child will hit on its
      # way to exec'ing.
      #
      verbose "vfork child-following next test ignored for pre-HP/UX-10.30 targets."
      return 0
   }

   gdb_test_no_output "set follow-fork child"

   set test "step over vfork"
   if { [istarget "hppa*-*-hpux*"]} {
       # Since the child cannot be debugged until after it has exec'd,
       # and since there's a bp on "main" in the parent, and since the
       # bp's for the parent are recomputed in the exec'd child, the
       # step through a vfork should land us in the "main" for the
       # exec'd child, too.
       #
       set linenum [gdb_get_line_number "printf(\"Hello from vforked-prog" ${srcfile2}]
       gdb_test_multiple "next" $test {
	   -re "Attaching after fork to.*Executing new program.*Breakpoint.*vforked-prog.c:${linenum}.*$gdb_prompt " {
	       pass "$test"
	   }
       }
   } else {
       # The ideal support is to be able to debug the child even
       # before it execs.  Thus, "next" lands on the next line after
       # the vfork.
       gdb_test_multiple "next" $test {
	   -re "Attaching after .* vfork to child.*if \\(pid == 0\\).*$gdb_prompt " {
	       pass "$test"
	   }
       }
   }
   # The parent has been detached; allow time for any output it might
   # generate to arrive, so that output doesn't get confused with
   # any expected debugger output from a subsequent testpoint.
   #
   exec sleep 1

   # Explicitly kill this child, or a subsequent rerun actually runs
   # the exec'd child, not the original program...
   kill_child
}}

proc tcatch_vfork_then_parent_follow {} {
  with_test_prefix "vfork parent follow, finish after tcatch vfork" {
   global gdb_prompt
   global srcfile

   gdb_test_no_output "set follow-fork parent"

   gdb_test "tcatch vfork" "Catchpoint .*(vfork).*"

   # HP-UX 10.20 seems to stop you in "vfork", while more recent
   # HP-UXs stop you in "_vfork".
   set test "continue to vfork"
   gdb_test_multiple "continue" $test {
      -re "0x\[0-9a-fA-F\]*.*(vfork|__kernel_v?syscall).*$gdb_prompt " {
	  pass $test
      }
      -re "vfork \\(\\) at.*$gdb_prompt " {
	  pass $test
      }
   }

   set linenum [gdb_get_line_number "pid = vfork ();"]
   set test "finish"
   gdb_test_multiple "finish" $test {
      -re "Run till exit from.*vfork.*0x\[0-9a-fA-F\]* in main .* at .*${srcfile}:${linenum}.*$gdb_prompt " {
	  pass $test
      }
      -re "Run till exit from.*__kernel_v?syscall.*0x\[0-9a-fA-F\]* in vfork .*$gdb_prompt " {
	  send_gdb "finish\n"
	  exp_continue
      }
   }
   # The child has been detached; allow time for any output it might
   # generate to arrive, so that output doesn't get confused with
   # any expected debugger output from a subsequent testpoint.
   #
   exec sleep 1
}}

proc tcatch_vfork_then_child_follow {} {
  with_test_prefix "vfork child follow, finish after tcatch vfork" {
   global gdb_prompt
   global srcfile
   global srcfile2

   gdb_test_no_output "set follow-fork child"

   gdb_test "tcatch vfork" "Catchpoint .*(vfork).*"

   # HP-UX 10.20 seems to stop you in "vfork", while more recent HP-UXs
   # stop you in "_vfork".
   set test "continue to vfork"
   gdb_test_multiple "continue" $test {
      -re "vfork \\(\\) at .*$gdb_prompt $" {
	  pass $test
      }
      -re "0x\[0-9a-fA-F\]*.*(vfork|__kernel_v?syscall).*$gdb_prompt " {
	  pass $test
      }
   }

   set linenum1 [gdb_get_line_number "pid = vfork ();"]
   set linenum2 [gdb_get_line_number "printf(\"Hello from vforked-prog" ${srcfile2}]

   set test "finish"
   gdb_test_multiple "finish" $test {
      -re "Run till exit from.*vfork.*${srcfile}:${linenum1}.*$gdb_prompt " {
	  pass $test
      }
      -re "Run till exit from.*__kernel_v?syscall.*0x\[0-9a-fA-F\]* in vfork .*$gdb_prompt " {
	  send_gdb "finish\n"
	  exp_continue
      }
      -re "Run till exit from.*vfork.*${srcfile2}:${linenum2}.*$gdb_prompt " {
	  pass "$test (followed exec)"
      }
   }
   # The parent has been detached; allow time for any output it might
   # generate to arrive, so that output doesn't get confused with
   # any expected debugger output from a subsequent testpoint.
   #
   exec sleep 1
}}

proc do_vfork_and_exec_tests {} {
   global gdb_prompt

   # Check that vfork catchpoints are supported, as an indicator for whether
   # vfork-following is supported.
   if [runto_main] then { check_vfork_catchpoints }

   # Try following the parent process by stepping through a call to
   # vfork.  Do this without catchpoints.
   if [runto_main] then { vfork_parent_follow_through_step }

   # Try following the parent process by setting a breakpoint on the
   # other side of a vfork, and running to that point.  Do this
   # without catchpoints.
   if [runto_main] then { vfork_parent_follow_to_bp }

   # Try following the child process by just continuing through the
   # vfork, and letting the parent's breakpoint on "main" be auto-
   # magically reset in the child.
   #
   if [runto_main] then { vfork_and_exec_child_follow_to_main_bp }

   # Try following the child process by stepping through a call to
   # vfork.  The child also executes an exec.  Since the child cannot
   # be debugged until after it has exec'd, and since there's a bp on
   # "main" in the parent, and since the bp's for the parent are
   # recomputed in the exec'd child, the step through a vfork should
   # land us in the "main" for the exec'd child, too.
   #
   if [runto_main] then { vfork_and_exec_child_follow_through_step }

   # Try catching a vfork, and stepping out to the parent.
   #
   if [runto_main] then { tcatch_vfork_then_parent_follow }

   # Try catching a vfork, and stepping out to the child.
   #
   if [runto_main] then { tcatch_vfork_then_child_follow }

   # Test the ability to follow both child and parent of a vfork.  Do
   # this without catchpoints.
   # ??rehrauer: NYI.  Will add testpoints here when implemented.
   #

   # Test the ability to have the debugger ask the user at vfork-time
   # whether to follow the parent, child or both.  Do this without
   # catchpoints.
   # ??rehrauer: NYI.  Will add testpoints here when implemented.
   #
}

# Start with a fresh gdb
clean_restart $testfile

# The "Detaching..." and "Attaching..." messages may be hidden by
# default.
gdb_test_no_output "set verbose"

# This is a test of gdb's ability to follow the parent or child
# of a Unix vfork() system call.  (The child will subsequently
# call a variant of a Unix exec() system call.)
#
do_vfork_and_exec_tests

set timeout $oldtimeout
return 0