binutils-gdb/sim/arm/thumbemu.c

2595 lines
59 KiB
C
Raw Normal View History

/* thumbemu.c -- Thumb instruction emulation.
Copyright (C) 1996, Cygnus Software Technologies Ltd.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, see <http://www.gnu.org/licenses/>. */
/* We can provide simple Thumb simulation by decoding the Thumb
instruction into its corresponding ARM instruction, and using the
existing ARM simulator. */
2000-02-05 08:30:26 +01:00
#ifndef MODET /* required for the Thumb instruction support */
#if 1
#error "MODET needs to be defined for the Thumb world to work"
#else
#define MODET (1)
#endif
#endif
#include "armdefs.h"
#include "armemu.h"
1999-04-26 20:34:20 +02:00
#include "armos.h"
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
#define tBIT(n) ( (ARMword)(tinstr >> (n)) & 1)
#define tBITS(m,n) ( (ARMword)(tinstr << (31 - (n))) >> ((31 - (n)) + (m)) )
#define ntBIT(n) ( (ARMword)(next_instr >> (n)) & 1)
#define ntBITS(m,n) ( (ARMword)(next_instr << (31 - (n))) >> ((31 - (n)) + (m)) )
static int
test_cond (int cond, ARMul_State * state)
{
switch (cond)
{
case EQ: return ZFLAG;
case NE: return !ZFLAG;
case VS: return VFLAG;
case VC: return !VFLAG;
case MI: return NFLAG;
case PL: return !NFLAG;
case CS: return CFLAG;
case CC: return !CFLAG;
case HI: return (CFLAG && !ZFLAG);
case LS: return (!CFLAG || ZFLAG);
case GE: return ((!NFLAG && !VFLAG) || (NFLAG && VFLAG));
case LT: return ((NFLAG && !VFLAG) || (!NFLAG && VFLAG));
case GT: return ((!NFLAG && !VFLAG && !ZFLAG)
|| (NFLAG && VFLAG && !ZFLAG));
case LE: return ((NFLAG && !VFLAG) || (!NFLAG && VFLAG)) || ZFLAG;
case AL: return TRUE;
case NV:
default: return FALSE;
}
}
static ARMword skipping_32bit_thumb = 0;
static int IT_block_cond = AL;
static ARMword IT_block_mask = 0;
static int IT_block_first = FALSE;
static void
handle_IT_block (ARMul_State * state,
ARMword tinstr,
tdstate * pvalid)
{
* pvalid = t_branch;
IT_block_mask = tBITS (0, 3);
if (IT_block_mask == 0)
// NOP or a HINT.
return;
IT_block_cond = tBITS (4, 7);
IT_block_first = TRUE;
}
static int
in_IT_block (void)
{
return IT_block_mask != 0;
}
static int
IT_block_allow (ARMul_State * state)
{
int cond;
if (IT_block_mask == 0)
return TRUE;
cond = IT_block_cond;
if (IT_block_first)
IT_block_first = FALSE;
else
{
if ((IT_block_mask & 8) == 0)
cond &= 0xe;
else
cond |= 1;
IT_block_mask <<= 1;
IT_block_mask &= 0xF;
}
if (IT_block_mask == 0x8)
IT_block_mask = 0;
return test_cond (cond, state);
}
static ARMword
ThumbExpandImm (ARMword tinstr)
{
ARMword val;
if (tBITS (10, 11) == 0)
{
switch (tBITS (8, 9))
{
case 0: val = tBITS (0, 7); break;
case 1: val = tBITS (0, 7) << 8; break;
case 2: val = (tBITS (0, 7) << 8) | (tBITS (0, 7) << 24); break;
case 3: val = tBITS (0, 7) * 0x01010101; break;
default: val = 0;
}
}
else
{
int ror = tBITS (7, 11);
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
val = (1 << 7) | tBITS (0, 6);
val = (val >> ror) | (val << (32 - ror));
}
return val;
}
#define tASSERT(truth) \
do \
{ \
if (! (truth)) \
{ \
fprintf (stderr, "unhandled T2 insn %04x|%04x detected at thumbemu.c:%d\n", \
tinstr, next_instr, __LINE__); \
return ; \
} \
} \
while (0)
/* Attempt to emulate a 32-bit ARMv7 Thumb instruction.
Stores t_branch into PVALUE upon success or t_undefined otherwise. */
static void
handle_T2_insn (ARMul_State * state,
ARMword tinstr,
ARMword next_instr,
ARMword pc,
ARMword * ainstr,
tdstate * pvalid)
{
* pvalid = t_undefined;
if (! state->is_v6)
return;
if (trace)
fprintf (stderr, "|%04x ", next_instr);
if (tBITS (11, 15) == 0x1E && ntBIT (15) == 1)
{
ARMsword simm32 = 0;
int S = tBIT (10);
* pvalid = t_branch;
switch ((ntBIT (14) << 1) | ntBIT (12))
{
case 0: /* B<c>.W */
{
ARMword cond = tBITS (6, 9);
ARMword imm6;
ARMword imm11;
ARMword J1;
ARMword J2;
tASSERT (cond != AL && cond != NV);
if (! test_cond (cond, state))
return;
imm6 = tBITS (0, 5);
imm11 = ntBITS (0, 10);
J1 = ntBIT (13);
J2 = ntBIT (11);
simm32 = (J1 << 19) | (J2 << 18) | (imm6 << 12) | (imm11 << 1);
if (S)
simm32 |= -(1 << 20);
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
break;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 1: /* B.W */
{
ARMword imm10 = tBITS (0, 9);
ARMword imm11 = ntBITS (0, 10);
ARMword I1 = (ntBIT (13) ^ S) ? 0 : 1;
ARMword I2 = (ntBIT (11) ^ S) ? 0 : 1;
simm32 = (I1 << 23) | (I2 << 22) | (imm10 << 12) | (imm11 << 1);
if (S)
simm32 |= -(1 << 24);
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
break;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 2: /* BLX <label> */
{
ARMword imm10h = tBITS (0, 9);
ARMword imm10l = ntBITS (1, 10);
ARMword I1 = (ntBIT (13) ^ S) ? 0 : 1;
ARMword I2 = (ntBIT (11) ^ S) ? 0 : 1;
simm32 = (I1 << 23) | (I2 << 22) | (imm10h << 12) | (imm10l << 2);
if (S)
simm32 |= -(1 << 24);
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
CLEART;
state->Reg[14] = (pc + 4) | 1;
break;
}
case 3: /* BL <label> */
{
ARMword imm10 = tBITS (0, 9);
ARMword imm11 = ntBITS (0, 10);
ARMword I1 = (ntBIT (13) ^ S) ? 0 : 1;
ARMword I2 = (ntBIT (11) ^ S) ? 0 : 1;
simm32 = (I1 << 23) | (I2 << 22) | (imm10 << 12) | (imm11 << 1);
if (S)
simm32 |= -(1 << 24);
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
state->Reg[14] = (pc + 4) | 1;
break;
}
}
state->Reg[15] = (pc + 4 + simm32);
FLUSHPIPE;
if (trace_funcs)
fprintf (stderr, " pc changed to %x\n", state->Reg[15]);
return;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
switch (tBITS (5,12))
{
case 0x29: // TST<c>.W <Rn>,<Rm>{,<shift>}
{
ARMword Rn = tBITS (0, 3);
ARMword Rm = ntBITS (0, 3);
ARMword type = ntBITS (4, 5);
ARMword imm5 = (ntBITS (12, 14) << 2) | ntBITS (6, 7);
tASSERT (ntBITS (8, 11) == 0xF);
* ainstr = 0xE1100000;
* ainstr |= (Rn << 16);
* ainstr |= (Rm);
* ainstr |= (type << 5);
* ainstr |= (imm5 << 7);
* pvalid = t_decoded;
break;
}
case 0x46:
if (tBIT (4) && ntBITS (5, 15) == 0x780)
{
// Table Branch
ARMword Rn = tBITS (0, 3);
ARMword Rm = ntBITS (0, 3);
ARMword address, dest;
if (ntBIT (4))
{
// TBH
address = state->Reg[Rn] + state->Reg[Rm] * 2;
dest = ARMul_LoadHalfWord (state, address);
}
else
{
// TBB
address = state->Reg[Rn] + state->Reg[Rm];
dest = ARMul_LoadByte (state, address);
}
state->Reg[15] = (pc + 4 + dest * 2);
FLUSHPIPE;
* pvalid = t_branch;
break;
}
/* Fall through. */
case 0x42:
case 0x43:
case 0x47:
case 0x4A:
case 0x4B:
case 0x4E: // STRD
case 0x4F: // LDRD
{
ARMword Rn = tBITS (0, 3);
ARMword Rt = ntBITS (12, 15);
ARMword Rt2 = ntBITS (8, 11);
ARMword imm8 = ntBITS (0, 7);
ARMword P = tBIT (8);
ARMword U = tBIT (7);
ARMword W = tBIT (5);
tASSERT (Rt2 == Rt + 1);
imm8 <<= 2;
tASSERT (imm8 <= 255);
tASSERT (P != 0 || W != 0);
// Convert into an ARM A1 encoding.
if (Rn == 15)
{
tASSERT (tBIT (4) == 1);
// LDRD (literal)
// Ignore W even if 1.
* ainstr = 0xE14F00D0;
}
else
{
if (tBIT (4) == 1)
// LDRD (immediate)
* ainstr = 0xE04000D0;
else
{
// STRD<c> <Rt>,<Rt2>,[<Rn>{,#+/-<imm8>}]
// STRD<c> <Rt>,<Rt2>,[<Rn>],#+/-<imm8>
// STRD<c> <Rt>,<Rt2>,[<Rn>,#+/-<imm8>]!
* ainstr = 0xE04000F0;
}
* ainstr |= (Rn << 16);
* ainstr |= (P << 24);
* ainstr |= (W << 21);
}
* ainstr |= (U << 23);
* ainstr |= (Rt << 12);
* ainstr |= ((imm8 << 4) & 0xF00);
* ainstr |= (imm8 & 0xF);
* pvalid = t_decoded;
break;
}
case 0x44:
case 0x45: // LDMIA
{
ARMword Rn = tBITS (0, 3);
int W = tBIT (5);
ARMword list = (ntBIT (15) << 15) | (ntBIT (14) << 14) | ntBITS (0, 12);
if (Rn == 13)
* ainstr = 0xE8BD0000;
else
{
* ainstr = 0xE8900000;
* ainstr |= (W << 21);
* ainstr |= (Rn << 16);
}
* ainstr |= list;
* pvalid = t_decoded;
break;
}
case 0x48:
case 0x49: // STMDB
{
ARMword Rn = tBITS (0, 3);
int W = tBIT (5);
ARMword list = (ntBIT (14) << 14) | ntBITS (0, 12);
if (Rn == 13 && W)
* ainstr = 0xE92D0000;
else
{
* ainstr = 0xE9000000;
* ainstr |= (W << 21);
* ainstr |= (Rn << 16);
}
* ainstr |= list;
* pvalid = t_decoded;
break;
}
case 0x50:
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
{
ARMword Rd = ntBITS (8, 11);
ARMword Rn = tBITS (0, 3);
ARMword Rm = ntBITS (0, 3);
ARMword imm5 = (ntBITS (12, 14) << 2) | ntBITS (6, 7);
ARMword type = ntBITS (4, 5);
tASSERT (ntBIT (15) == 0);
if (Rd == 15)
{
tASSERT (tBIT (4) == 1);
// TST<c>.W <Rn>,<Rm>{,<shift>}
* ainstr = 0xE1100000;
}
else
{
// AND{S}<c>.W <Rd>,<Rn>,<Rm>{,<shift>}
int S = tBIT (4);
* ainstr = 0xE0000000;
if (in_IT_block ())
S = 0;
* ainstr |= (S << 20);
}
* ainstr |= (Rn << 16);
* ainstr |= (imm5 << 7);
* ainstr |= (type << 5);
* ainstr |= (Rm << 0);
* pvalid = t_decoded;
break;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0x51: // BIC{S}<c>.W <Rd>,<Rn>,<Rm>{,<shift>}
{
ARMword Rn = tBITS (0, 3);
ARMword S = tBIT(4);
ARMword Rm = ntBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
ARMword imm5 = (ntBITS (12, 14) << 2) | ntBITS (6, 7);
ARMword type = ntBITS (4, 5);
tASSERT (ntBIT (15) == 0);
* ainstr = 0xE1C00000;
* ainstr |= (S << 20);
* ainstr |= (Rn << 16);
* ainstr |= (Rd << 12);
* ainstr |= (imm5 << 7);
* ainstr |= (type << 5);
* ainstr |= (Rm << 0);
* pvalid = t_decoded;
break;
}
case 0x52:
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
{
ARMword Rn = tBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
ARMword Rm = ntBITS (0, 3);
int S = tBIT (4);
ARMword imm5 = (ntBITS (12, 14) << 2) | ntBITS (6, 7);
ARMword type = ntBITS (4, 5);
tASSERT (Rd != 15);
if (in_IT_block ())
S = 0;
if (Rn == 15)
{
tASSERT (ntBIT (15) == 0);
switch (ntBITS (4, 5))
{
case 0:
// LSL{S}<c>.W <Rd>,<Rm>,#<imm5>
* ainstr = 0xE1A00000;
break;
case 1:
// LSR{S}<c>.W <Rd>,<Rm>,#<imm>
* ainstr = 0xE1A00020;
break;
case 2:
// ASR{S}<c>.W <Rd>,<Rm>,#<imm>
* ainstr = 0xE1A00040;
break;
case 3:
// ROR{S}<c> <Rd>,<Rm>,#<imm>
* ainstr = 0xE1A00060;
break;
default:
tASSERT (0);
* ainstr = 0;
}
}
else
{
// ORR{S}<c>.W <Rd>,<Rn>,<Rm>{,<shift>}
* ainstr = 0xE1800000;
* ainstr |= (Rn << 16);
* ainstr |= (type << 5);
}
* ainstr |= (Rd << 12);
* ainstr |= (S << 20);
* ainstr |= (imm5 << 7);
* ainstr |= (Rm << 0);
* pvalid = t_decoded;
break;
}
case 0x53: // MVN{S}<c>.W <Rd>,<Rm>{,<shift>}
{
ARMword Rd = ntBITS (8, 11);
ARMword Rm = ntBITS (0, 3);
int S = tBIT (4);
ARMword imm5 = (ntBITS (12, 14) << 2) | ntBITS (6, 7);
ARMword type = ntBITS (4, 5);
tASSERT (ntBIT (15) == 0);
if (in_IT_block ())
S = 0;
* ainstr = 0xE1E00000;
* ainstr |= (S << 20);
* ainstr |= (Rd << 12);
* ainstr |= (imm5 << 7);
* ainstr |= (type << 5);
* ainstr |= (Rm << 0);
* pvalid = t_decoded;
break;
}
case 0x54:
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
{
ARMword Rn = tBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
ARMword Rm = ntBITS (0, 3);
int S = tBIT (4);
ARMword imm5 = (ntBITS (12, 14) << 2) | ntBITS (6, 7);
ARMword type = ntBITS (4, 5);
if (Rd == 15 && S)
{
// TEQ<c> <Rn>,<Rm>{,<shift>}
tASSERT (ntBIT (15) == 0);
* ainstr = 0xE1300000;
}
else
{
// EOR{S}<c>.W <Rd>,<Rn>,<Rm>{,<shift>}
if (in_IT_block ())
S = 0;
* ainstr = 0xE0200000;
* ainstr |= (S << 20);
* ainstr |= (Rd << 8);
}
* ainstr |= (Rn << 16);
* ainstr |= (imm5 << 7);
* ainstr |= (type << 5);
* ainstr |= (Rm << 0);
* pvalid = t_decoded;
break;
}
case 0x58: // ADD{S}<c>.W <Rd>,<Rn>,<Rm>{,<shift>}
{
ARMword Rn = tBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
ARMword Rm = ntBITS (0, 3);
int S = tBIT (4);
ARMword imm5 = (ntBITS (12, 14) << 2) | ntBITS (6, 7);
ARMword type = ntBITS (4, 5);
tASSERT (! (Rd == 15 && S));
if (in_IT_block ())
S = 0;
* ainstr = 0xE0800000;
* ainstr |= (S << 20);
* ainstr |= (Rn << 16);
* ainstr |= (Rd << 12);
* ainstr |= (imm5 << 7);
* ainstr |= (type << 5);
* ainstr |= Rm;
* pvalid = t_decoded;
break;
}
case 0x5A: // ADC{S}<c>.W <Rd>,<Rn>,<Rm>{,<shift>}
tASSERT (ntBIT (15) == 0);
* ainstr = 0xE0A00000;
if (! in_IT_block ())
* ainstr |= (tBIT (4) << 20); // S
* ainstr |= (tBITS (0, 3) << 16); // Rn
* ainstr |= (ntBITS (8, 11) << 12); // Rd
* ainstr |= ((ntBITS (12, 14) << 2) | ntBITS (6, 7)) << 7; // imm5
* ainstr |= (ntBITS (4, 5) << 5); // type
* ainstr |= ntBITS (0, 3); // Rm
* pvalid = t_decoded;
break;
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0x5B: // SBC{S}<c>.W <Rd>,<Rn>,<Rm>{,<shift>}
{
ARMword Rn = tBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
ARMword Rm = ntBITS (0, 3);
int S = tBIT (4);
ARMword imm5 = (ntBITS (12, 14) << 2) | ntBITS (6, 7);
ARMword type = ntBITS (4, 5);
tASSERT (ntBIT (15) == 0);
if (in_IT_block ())
S = 0;
* ainstr = 0xE0C00000;
* ainstr |= (S << 20);
* ainstr |= (Rn << 16);
* ainstr |= (Rd << 12);
* ainstr |= (imm5 << 7);
* ainstr |= (type << 5);
* ainstr |= Rm;
* pvalid = t_decoded;
break;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0x5E: // RSB{S}<c> <Rd>,<Rn>,<Rm>{,<shift>}
case 0x5D: // SUB{S}<c>.W <Rd>,<Rn>,<Rm>{,<shift>}
{
ARMword Rn = tBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
ARMword Rm = ntBITS (0, 3);
ARMword S = tBIT (4);
ARMword type = ntBITS (4, 5);
ARMword imm5 = (ntBITS (12, 14) << 2) | ntBITS (6, 7);
tASSERT (ntBIT(15) == 0);
if (Rd == 15)
{
// CMP<c>.W <Rn>, <Rm> {,<shift>}
* ainstr = 0xE1500000;
Rd = 0;
}
else if (tBIT (5))
* ainstr = 0xE0400000;
else
* ainstr = 0xE0600000;
* ainstr |= (S << 20);
* ainstr |= (Rn << 16);
* ainstr |= (Rd << 12);
* ainstr |= (imm5 << 7);
* ainstr |= (type << 5);
* ainstr |= (Rm << 0);
* pvalid = t_decoded;
break;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0x9D: // NOP.W
tASSERT (tBITS (0, 15) == 0xF3AF);
tASSERT (ntBITS (0, 15) == 0x8000);
* pvalid = t_branch;
break;
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0x80: // AND
case 0xA0: // TST
{
ARMword Rn = tBITS (0, 3);
ARMword imm12 = (tBIT(10) << 11) | (ntBITS (12, 14) << 8) | ntBITS (0, 7);
ARMword Rd = ntBITS (8, 11);
ARMword val;
int S = tBIT (4);
imm12 = ThumbExpandImm (imm12);
val = state->Reg[Rn] & imm12;
if (Rd == 15)
{
// TST<c> <Rn>,#<const>
tASSERT (S == 1);
}
else
{
// AND{S}<c> <Rd>,<Rn>,#<const>
if (in_IT_block ())
S = 0;
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
state->Reg[Rd] = val;
}
if (S)
ARMul_NegZero (state, val);
* pvalid = t_branch;
break;
}
case 0xA1:
case 0x81: // BIC.W
{
ARMword Rn = tBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
ARMword S = tBIT (4);
ARMword imm8 = (ntBITS (12, 14) << 8) | ntBITS (0, 7);
tASSERT (ntBIT (15) == 0);
imm8 = ThumbExpandImm (imm8);
state->Reg[Rd] = state->Reg[Rn] & ~ imm8;
if (S && ! in_IT_block ())
ARMul_NegZero (state, state->Reg[Rd]);
* pvalid = t_resolved;
break;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0xA2:
case 0x82: // MOV{S}<c>.W <Rd>,#<const>
{
ARMword val = (tBIT(10) << 11) | (ntBITS (12, 14) << 8) | ntBITS (0, 7);
ARMword Rd = ntBITS (8, 11);
val = ThumbExpandImm (val);
state->Reg[Rd] = val;
if (tBIT (4) && ! in_IT_block ())
ARMul_NegZero (state, val);
/* Indicate that the instruction has been processed. */
* pvalid = t_branch;
break;
}
case 0xA3:
case 0x83: // MVN{S}<c> <Rd>,#<const>
{
ARMword val = (tBIT(10) << 11) | (ntBITS (12, 14) << 8) | ntBITS (0, 7);
ARMword Rd = ntBITS (8, 11);
val = ThumbExpandImm (val);
val = ~ val;
state->Reg[Rd] = val;
if (tBIT (4) && ! in_IT_block ())
ARMul_NegZero (state, val);
* pvalid = t_resolved;
break;
}
case 0xA4: // EOR
case 0x84: // TEQ
{
ARMword Rn = tBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
ARMword S = tBIT (4);
ARMword imm12 = ((tBIT (10) << 11) | (ntBITS (12, 14) << 8) | ntBITS (0, 7));
ARMword result;
imm12 = ThumbExpandImm (imm12);
result = state->Reg[Rn] ^ imm12;
if (Rd == 15 && S)
// TEQ<c> <Rn>,#<const>
;
else
{
// EOR{S}<c> <Rd>,<Rn>,#<const>
state->Reg[Rd] = result;
if (in_IT_block ())
S = 0;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
if (S)
ARMul_NegZero (state, result);
* pvalid = t_resolved;
break;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0xA8: // CMN
case 0x88: // ADD
{
ARMword Rd = ntBITS (8, 11);
int S = tBIT (4);
ARMword Rn = tBITS (0, 3);
ARMword lhs = state->Reg[Rn];
ARMword imm12 = (tBIT (10) << 11) | (ntBITS (12, 14) << 8) | ntBITS (0, 7);
ARMword rhs = ThumbExpandImm (imm12);
ARMword res = lhs + rhs;
if (Rd == 15 && S)
{
// CMN<c> <Rn>,#<const>
res = lhs - rhs;
}
else
{
// ADD{S}<c>.W <Rd>,<Rn>,#<const>
res = lhs + rhs;
if (in_IT_block ())
S = 0;
state->Reg[Rd] = res;
}
if (S)
{
ARMul_NegZero (state, res);
if ((lhs | rhs) >> 30)
{
/* Possible C,V,N to set. */
ARMul_AddCarry (state, lhs, rhs, res);
ARMul_AddOverflow (state, lhs, rhs, res);
}
else
{
CLEARC;
CLEARV;
}
}
* pvalid = t_branch;
break;
}
case 0xAA:
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0x8A: // ADC{S}<c> <Rd>,<Rn>,#<const>
{
ARMword Rn = tBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
int S = tBIT (4);
ARMword imm12 = (tBIT (10) << 11) | (ntBITS (12, 14) << 8) | ntBITS (0, 7);
ARMword lhs = state->Reg[Rn];
ARMword rhs = ThumbExpandImm (imm12);
ARMword res;
tASSERT (ntBIT (15) == 0);
if (CFLAG)
rhs += 1;
res = lhs + rhs;
state->Reg[Rd] = res;
if (in_IT_block ())
S = 0;
if (S)
{
ARMul_NegZero (state, res);
if ((lhs >= rhs) || ((rhs | lhs) >> 31))
{
ARMul_AddCarry (state, lhs, rhs, res);
ARMul_AddOverflow (state, lhs, rhs, res);
}
else
{
CLEARC;
CLEARV;
}
}
* pvalid = t_branch;
break;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0xAB:
case 0x8B: // SBC{S}<c> <Rd>,<Rn>,#<const>
{
ARMword Rn = tBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
int S = tBIT (4);
ARMword imm12 = (tBIT (10) << 11) | (ntBITS (12, 14) << 8) | ntBITS (0, 7);
ARMword lhs = state->Reg[Rn];
ARMword rhs = ThumbExpandImm (imm12);
ARMword res;
tASSERT (ntBIT (15) == 0);
if (! CFLAG)
rhs += 1;
res = lhs - rhs;
state->Reg[Rd] = res;
if (in_IT_block ())
S = 0;
if (S)
{
ARMul_NegZero (state, res);
if ((lhs >= rhs) || ((rhs | lhs) >> 31))
{
ARMul_SubCarry (state, lhs, rhs, res);
ARMul_SubOverflow (state, lhs, rhs, res);
}
else
{
CLEARC;
CLEARV;
}
}
* pvalid = t_branch;
break;
}
case 0xAD:
case 0x8D: // SUB
{
ARMword Rn = tBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
int S = tBIT (4);
ARMword imm12 = (tBIT (10) << 11) | (ntBITS (12, 14) << 8) | ntBITS (0, 7);
ARMword lhs = state->Reg[Rn];
ARMword rhs = ThumbExpandImm (imm12);
ARMword res = lhs - rhs;
if (Rd == 15 && S)
{
// CMP<c>.W <Rn>,#<const>
tASSERT (S);
}
else
{
// SUB{S}<c>.W <Rd>,<Rn>,#<const>
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
if (in_IT_block ())
S = 0;
state->Reg[Rd] = res;
}
if (S)
{
ARMul_NegZero (state, res);
if ((lhs >= rhs) || ((rhs | lhs) >> 31))
{
ARMul_SubCarry (state, lhs, rhs, res);
ARMul_SubOverflow (state, lhs, rhs, res);
}
else
{
CLEARC;
CLEARV;
}
}
* pvalid = t_branch;
break;
}
case 0xAE:
case 0x8E: // RSB{S}<c>.W <Rd>,<Rn>,#<const>
{
ARMword Rn = tBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
ARMword imm12 = (tBIT (10) << 11) | (ntBITS (12, 14) << 8) | ntBITS (0, 7);
int S = tBIT (4);
ARMword lhs = imm12;
ARMword rhs = state->Reg[Rn];
ARMword res = lhs - rhs;
tASSERT (ntBIT (15) == 0);
state->Reg[Rd] = res;
if (S)
{
ARMul_NegZero (state, res);
if ((lhs >= rhs) || ((rhs | lhs) >> 31))
{
ARMul_SubCarry (state, lhs, rhs, res);
ARMul_SubOverflow (state, lhs, rhs, res);
}
else
{
CLEARC;
CLEARV;
}
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
* pvalid = t_branch;
break;
}
case 0xB0:
case 0x90: // ADDW<c> <Rd>,<Rn>,#<imm12>
{
ARMword Rn = tBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
ARMword imm12 = (tBIT (10) << 11) | (ntBITS (12, 14) << 8) | ntBITS (0, 7);
tASSERT (tBIT (4) == 0);
tASSERT (ntBIT (15) == 0);
state->Reg[Rd] = state->Reg[Rn] + imm12;
* pvalid = t_branch;
break;
}
case 0xB2:
case 0x92: // MOVW<c> <Rd>,#<imm16>
{
ARMword Rd = ntBITS (8, 11);
ARMword imm = (tBITS (0, 3) << 12) | (tBIT (10) << 11) | (ntBITS (12, 14) << 8) | ntBITS (0, 7);
state->Reg[Rd] = imm;
/* Indicate that the instruction has been processed. */
* pvalid = t_branch;
break;
}
case 0xb5:
case 0x95:// SUBW<c> <Rd>,<Rn>,#<imm12>
{
ARMword Rd = ntBITS (8, 11);
ARMword Rn = tBITS (0, 3);
ARMword imm12 = (tBIT (10) << 11) | (ntBITS (12, 14) << 8) | ntBITS (0, 7);
tASSERT (tBIT (4) == 0);
tASSERT (ntBIT (15) == 0);
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
/* Note the ARM ARM indicates special cases for Rn == 15 (ADR)
and Rn == 13 (SUB SP minus immediate), but these are implemented
in exactly the same way as the normal SUBW insn. */
state->Reg[Rd] = state->Reg[Rn] - imm12;
* pvalid = t_resolved;
break;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0xB6:
case 0x96: // MOVT<c> <Rd>,#<imm16>
{
ARMword Rd = ntBITS (8, 11);
ARMword imm = (tBITS (0, 3) << 12) | (tBIT (10) << 11) | (ntBITS (12, 14) << 8) | ntBITS (0, 7);
state->Reg[Rd] &= 0xFFFF;
state->Reg[Rd] |= (imm << 16);
* pvalid = t_resolved;
break;
}
case 0x9A: // SBFXc> <Rd>,<Rn>,#<lsb>,#<width>
tASSERT (tBIT (4) == 0);
tASSERT (ntBIT (15) == 0);
tASSERT (ntBIT (5) == 0);
* ainstr = 0xE7A00050;
* ainstr |= (ntBITS (0, 4) << 16); // widthm1
* ainstr |= (ntBITS (8, 11) << 12); // Rd
* ainstr |= (((ntBITS (12, 14) << 2) | ntBITS (6, 7)) << 7); // lsb
* ainstr |= tBITS (0, 3); // Rn
* pvalid = t_decoded;
break;
case 0x9B:
{
ARMword Rd = ntBITS (8, 11);
ARMword Rn = tBITS (0, 3);
ARMword msbit = ntBITS (0, 5);
ARMword lsbit = (ntBITS (12, 14) << 2) | ntBITS (6, 7);
ARMword mask = -(1 << lsbit);
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
tASSERT (tBIT (4) == 0);
tASSERT (ntBIT (15) == 0);
tASSERT (ntBIT (5) == 0);
mask &= ((1 << (msbit + 1)) - 1);
if (lsbit > msbit)
; // UNPREDICTABLE
else if (Rn == 15)
{
// BFC<c> <Rd>,#<lsb>,#<width>
state->Reg[Rd] &= ~ mask;
}
else
{
// BFI<c> <Rd>,<Rn>,#<lsb>,#<width>
ARMword val = state->Reg[Rn] & (mask >> lsbit);
val <<= lsbit;
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
state->Reg[Rd] &= ~ mask;
state->Reg[Rd] |= val;
}
* pvalid = t_resolved;
break;
}
case 0x9E: // UBFXc> <Rd>,<Rn>,#<lsb>,#<width>
tASSERT (tBIT (4) == 0);
tASSERT (ntBIT (15) == 0);
tASSERT (ntBIT (5) == 0);
* ainstr = 0xE7E00050;
* ainstr |= (ntBITS (0, 4) << 16); // widthm1
* ainstr |= (ntBITS (8, 11) << 12); // Rd
* ainstr |= (((ntBITS (12, 14) << 2) | ntBITS (6, 7)) << 7); // lsb
* ainstr |= tBITS (0, 3); // Rn
* pvalid = t_decoded;
break;
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0xC0: // STRB
case 0xC4: // LDRB
{
ARMword Rn = tBITS (0, 3);
ARMword Rt = ntBITS (12, 15);
if (tBIT (4))
{
if (Rn == 15)
{
tASSERT (Rt != 15);
/* LDRB<c> <Rt>,<label> => 1111 1000 U001 1111 */
* ainstr = 0xE55F0000;
* ainstr |= (tBIT (7) << 23);
* ainstr |= ntBITS (0, 11);
}
else if (tBIT (7))
{
/* LDRB<c>.W <Rt>,[<Rn>{,#<imm12>}] => 1111 1000 1001 rrrr */
* ainstr = 0xE5D00000;
* ainstr |= ntBITS (0, 11);
}
else if (ntBIT (11) == 0)
{
/* LDRB<c>.W <Rt>,[<Rn>,<Rm>{,LSL #<imm2>}] => 1111 1000 0001 rrrr */
* ainstr = 0xE7D00000;
* ainstr |= (ntBITS (4, 5) << 7);
* ainstr |= ntBITS (0, 3);
}
else
{
int P = ntBIT (10);
int U = ntBIT (9);
int W = ntBIT (8);
tASSERT (! (Rt == 15 && P && !U && !W));
tASSERT (! (P && U && !W));
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
/* LDRB<c> <Rt>,[<Rn>,#-<imm8>] => 1111 1000 0001 rrrr
LDRB<c> <Rt>,[<Rn>],#+/-<imm8> => 1111 1000 0001 rrrr
LDRB<c> <Rt>,[<Rn>,#+/-<imm8>]! => 1111 1000 0001 rrrr */
* ainstr = 0xE4500000;
* ainstr |= (P << 24);
* ainstr |= (U << 23);
* ainstr |= (W << 21);
* ainstr |= ntBITS (0, 7);
}
}
else
{
if (tBIT (7) == 1)
{
// STRB<c>.W <Rt>,[<Rn>,#<imm12>]
ARMword imm12 = ntBITS (0, 11);
ARMul_StoreByte (state, state->Reg[Rn] + imm12, state->Reg [Rt]);
* pvalid = t_branch;
break;
}
else if (ntBIT (11))
{
// STRB<c> <Rt>,[<Rn>,#-<imm8>]
// STRB<c> <Rt>,[<Rn>],#+/-<imm8>
// STRB<c> <Rt>,[<Rn>,#+/-<imm8>]!
int P = ntBIT (10);
int U = ntBIT (9);
int W = ntBIT (8);
ARMword imm8 = ntBITS (0, 7);
tASSERT (! (P && U && !W));
tASSERT (! (Rn == 13 && P && !U && W && imm8 == 4));
* ainstr = 0xE4000000;
* ainstr |= (P << 24);
* ainstr |= (U << 23);
* ainstr |= (W << 21);
* ainstr |= imm8;
}
else
{
// STRB<c>.W <Rt>,[<Rn>,<Rm>{,LSL #<imm2>}]
tASSERT (ntBITS (6, 11) == 0);
* ainstr = 0xE7C00000;
* ainstr |= (ntBITS (4, 5) << 7);
* ainstr |= ntBITS (0, 3);
}
}
* ainstr |= (Rn << 16);
* ainstr |= (Rt << 12);
* pvalid = t_decoded;
break;
}
case 0xC2: // LDR, STR
{
ARMword Rn = tBITS (0, 3);
ARMword Rt = ntBITS (12, 15);
ARMword imm8 = ntBITS (0, 7);
ARMword P = ntBIT (10);
ARMword U = ntBIT (9);
ARMword W = ntBIT (8);
tASSERT (Rn != 15);
if (tBIT (4))
{
if (Rn == 15)
{
// LDR<c>.W <Rt>,<label>
* ainstr = 0xE51F0000;
* ainstr |= ntBITS (0, 11);
}
else if (ntBIT (11))
{
tASSERT (! (P && U && ! W));
tASSERT (! (!P && U && W && Rn == 13 && imm8 == 4 && ntBIT (11) == 0));
tASSERT (! (P && !U && W && Rn == 13 && imm8 == 4 && ntBIT (11)));
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
// LDR<c> <Rt>,[<Rn>,#-<imm8>]
// LDR<c> <Rt>,[<Rn>],#+/-<imm8>
// LDR<c> <Rt>,[<Rn>,#+/-<imm8>]!
if (!P && W)
W = 0;
* ainstr = 0xE4100000;
* ainstr |= (P << 24);
* ainstr |= (U << 23);
* ainstr |= (W << 21);
* ainstr |= imm8;
}
else
{
// LDR<c>.W <Rt>,[<Rn>,<Rm>{,LSL #<imm2>}]
tASSERT (ntBITS (6, 11) == 0);
* ainstr = 0xE7900000;
* ainstr |= ntBITS (4, 5) << 7;
* ainstr |= ntBITS (0, 3);
}
}
else
{
if (ntBIT (11))
{
tASSERT (! (P && U && ! W));
if (Rn == 13 && P && !U && W && imm8 == 4)
{
// PUSH<c>.W <register>
tASSERT (ntBITS (0, 11) == 0xD04);
tASSERT (tBITS (0, 4) == 0x0D);
* ainstr = 0xE92D0000;
* ainstr |= (1 << Rt);
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
Rt = Rn = 0;
}
else
{
tASSERT (! (P && U && !W));
if (!P && W)
W = 0;
// STR<c> <Rt>,[<Rn>,#-<imm8>]
// STR<c> <Rt>,[<Rn>],#+/-<imm8>
// STR<c> <Rt>,[<Rn>,#+/-<imm8>]!
* ainstr = 0xE4000000;
* ainstr |= (P << 24);
* ainstr |= (U << 23);
* ainstr |= (W << 21);
* ainstr |= imm8;
}
}
else
{
// STR<c>.W <Rt>,[<Rn>,<Rm>{,LSL #<imm2>}]
tASSERT (ntBITS (6, 11) == 0);
* ainstr = 0xE7800000;
* ainstr |= ntBITS (4, 5) << 7;
* ainstr |= ntBITS (0, 3);
}
}
* ainstr |= (Rn << 16);
* ainstr |= (Rt << 12);
* pvalid = t_decoded;
break;
}
case 0xC1: // STRH
case 0xC5: // LDRH
{
ARMword Rn = tBITS (0, 3);
ARMword Rt = ntBITS (12, 15);
ARMword address;
tASSERT (Rn != 15);
if (tBIT (4) == 1)
{
if (tBIT (7))
{
// LDRH<c>.W <Rt>,[<Rn>{,#<imm12>}]
ARMword imm12 = ntBITS (0, 11);
address = state->Reg[Rn] + imm12;
}
else if (ntBIT (11))
{
// LDRH<c> <Rt>,[<Rn>,#-<imm8>]
// LDRH<c> <Rt>,[<Rn>],#+/-<imm8>
// LDRH<c> <Rt>,[<Rn>,#+/-<imm8>]!
ARMword P = ntBIT (10);
ARMword U = ntBIT (9);
ARMword W = ntBIT (8);
ARMword imm8 = ntBITS (0, 7);
tASSERT (Rn != 15);
tASSERT (! (P && U && !W));
* ainstr = 0xE05000B0;
* ainstr |= (P << 24);
* ainstr |= (U << 23);
* ainstr |= (W << 21);
* ainstr |= (Rn << 16);
* ainstr |= (Rt << 12);
* ainstr |= ((imm8 & 0xF0) << 4);
* ainstr |= (imm8 & 0xF);
* pvalid = t_decoded;
break;
}
else
{
// LDRH<c>.W <Rt>,[<Rn>,<Rm>{,LSL #<imm2>}]
ARMword Rm = ntBITS (0, 3);
ARMword imm2 = ntBITS (4, 5);
tASSERT (ntBITS (6, 10) == 0);
address = state->Reg[Rn] + (state->Reg[Rm] << imm2);
}
state->Reg[Rt] = ARMul_LoadHalfWord (state, address);
}
else
{
if (tBIT (7))
{
// STRH<c>.W <Rt>,[<Rn>{,#<imm12>}]
ARMword imm12 = ntBITS (0, 11);
address = state->Reg[Rn] + imm12;
}
else if (ntBIT (11))
{
// STRH<c> <Rt>,[<Rn>,#-<imm8>]
// STRH<c> <Rt>,[<Rn>],#+/-<imm8>
// STRH<c> <Rt>,[<Rn>,#+/-<imm8>]!
ARMword P = ntBIT (10);
ARMword U = ntBIT (9);
ARMword W = ntBIT (8);
ARMword imm8 = ntBITS (0, 7);
tASSERT (! (P && U && !W));
* ainstr = 0xE04000B0;
* ainstr |= (P << 24);
* ainstr |= (U << 23);
* ainstr |= (W << 21);
* ainstr |= (Rn << 16);
* ainstr |= (Rt << 12);
* ainstr |= ((imm8 & 0xF0) << 4);
* ainstr |= (imm8 & 0xF);
* pvalid = t_decoded;
break;
}
else
{
// STRH<c>.W <Rt>,[<Rn>,<Rm>{,LSL #<imm2>}]
ARMword Rm = ntBITS (0, 3);
ARMword imm2 = ntBITS (4, 5);
tASSERT (ntBITS (6, 10) == 0);
address = state->Reg[Rn] + (state->Reg[Rm] << imm2);
}
ARMul_StoreHalfWord (state, address, state->Reg [Rt]);
}
* pvalid = t_branch;
break;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0xC6: // LDR.W/STR.W
{
ARMword Rn = tBITS (0, 3);
ARMword Rt = ntBITS (12, 15);
ARMword imm12 = ntBITS (0, 11);
ARMword address = state->Reg[Rn];
if (Rn == 15)
{
// LDR<c>.W <Rt>,<label>
tASSERT (tBIT (4) == 1);
// tASSERT (tBIT (7) == 1)
}
address += imm12;
if (tBIT (4) == 1)
state->Reg[Rt] = ARMul_LoadWordN (state, address);
else
ARMul_StoreWordN (state, address, state->Reg [Rt]);
* pvalid = t_resolved;
break;
}
case 0xC8:
case 0xCC: // LDRSB
{
ARMword Rt = ntBITS (12, 15);
ARMword Rn = tBITS (0, 3);
ARMword U = tBIT (7);
ARMword address = state->Reg[Rn];
tASSERT (tBIT (4) == 1);
tASSERT (Rt != 15); // PLI
if (Rn == 15)
{
// LDRSB<c> <Rt>,<label>
ARMword imm12 = ntBITS (0, 11);
address += (U ? imm12 : - imm12);
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
else if (U)
{
// LDRSB<c> <Rt>,[<Rn>,#<imm12>]
ARMword imm12 = ntBITS (0, 11);
address += imm12;
}
else if (ntBIT (11))
{
// LDRSB<c> <Rt>,[<Rn>,#-<imm8>]
// LDRSB<c> <Rt>,[<Rn>],#+/-<imm8>
// LDRSB<c> <Rt>,[<Rn>,#+/-<imm8>]!
* ainstr = 0xE05000D0;
* ainstr |= ntBIT (10) << 24; // P
* ainstr |= ntBIT (9) << 23; // U
* ainstr |= ntBIT (8) << 21; // W
* ainstr |= Rn << 16;
* ainstr |= Rt << 12;
* ainstr |= ntBITS (4, 7) << 8;
* ainstr |= ntBITS (0, 3);
* pvalid = t_decoded;
break;
}
else
{
// LDRSB<c>.W <Rt>,[<Rn>,<Rm>{,LSL #<imm2>}]
ARMword Rm = ntBITS (0, 3);
ARMword imm2 = ntBITS (4,5);
tASSERT (ntBITS (6, 11) == 0);
address += (state->Reg[Rm] << imm2);
}
state->Reg[Rt] = ARMul_LoadByte (state, address);
if (state->Reg[Rt] & 0x80)
state->Reg[Rt] |= -(1 << 8);
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
* pvalid = t_resolved;
break;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0xC9:
case 0xCD:// LDRSH
{
ARMword Rt = ntBITS (12, 15);
ARMword Rn = tBITS (0, 3);
ARMword U = tBIT (7);
ARMword address = state->Reg[Rn];
tASSERT (tBIT (4) == 1);
if (Rn == 15 || U == 1)
{
// Rn==15 => LDRSH<c> <Rt>,<label>
// Rn!=15 => LDRSH<c> <Rt>,[<Rn>,#<imm12>]
ARMword imm12 = ntBITS (0, 11);
address += (U ? imm12 : - imm12);
}
else if (ntBIT (11))
{
// LDRSH<c> <Rt>,[<Rn>,#-<imm8>]
// LDRSH<c> <Rt>,[<Rn>],#+/-<imm8>
// LDRSH<c> <Rt>,[<Rn>,#+/-<imm8>]!
* ainstr = 0xE05000F0;
* ainstr |= ntBIT (10) << 24; // P
* ainstr |= ntBIT (9) << 23; // U
* ainstr |= ntBIT (8) << 21; // W
* ainstr |= Rn << 16;
* ainstr |= Rt << 12;
* ainstr |= ntBITS (4, 7) << 8;
* ainstr |= ntBITS (0, 3);
* pvalid = t_decoded;
break;
}
else /* U == 0 */
{
// LDRSH<c>.W <Rt>,[<Rn>,<Rm>{,LSL #<imm2>}]
ARMword Rm = ntBITS (0, 3);
ARMword imm2 = ntBITS (4,5);
tASSERT (ntBITS (6, 11) == 0);
address += (state->Reg[Rm] << imm2);
}
state->Reg[Rt] = ARMul_LoadHalfWord (state, address);
if (state->Reg[Rt] & 0x8000)
state->Reg[Rt] |= -(1 << 16);
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
* pvalid = t_branch;
break;
}
case 0x0D0:
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
{
ARMword Rm = ntBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
tASSERT (ntBITS (12, 15) == 15);
if (ntBIT (7) == 1)
{
// SXTH<c>.W <Rd>,<Rm>{,<rotation>}
ARMword ror = ntBITS (4, 5) << 3;
ARMword val;
val = state->Reg[Rm];
val = (val >> ror) | (val << (32 - ror));
if (val & 0x8000)
val |= -(1 << 16);
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
state->Reg[Rd] = val;
}
else
{
// LSL{S}<c>.W <Rd>,<Rn>,<Rm>
ARMword Rn = tBITS (0, 3);
tASSERT (ntBITS (4, 6) == 0);
state->Reg[Rd] = state->Reg[Rn] << (state->Reg[Rm] & 0xFF);
if (tBIT (4))
ARMul_NegZero (state, state->Reg[Rd]);
}
* pvalid = t_branch;
break;
}
case 0x0D1: // LSR{S}<c>.W <Rd>,<Rn>,<Rm>
{
ARMword Rd = ntBITS (8, 11);
ARMword Rn = tBITS (0, 3);
ARMword Rm = ntBITS (0, 3);
tASSERT (ntBITS (12, 15) == 15);
tASSERT (ntBITS (4, 7) == 0);
state->Reg[Rd] = state->Reg[Rn] >> (state->Reg[Rm] & 0xFF);
if (tBIT (4))
ARMul_NegZero (state, state->Reg[Rd]);
* pvalid = t_resolved;
break;
}
case 0xD2:
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
tASSERT (ntBITS (12, 15) == 15);
if (ntBIT (7))
{
tASSERT (ntBIT (6) == 0);
// UXTB<c>.W <Rd>,<Rm>{,<rotation>}
* ainstr = 0xE6EF0070;
* ainstr |= (ntBITS (4, 5) << 10); // rotate
* ainstr |= ntBITS (0, 3); // Rm
}
else
{
// ASR{S}<c>.W <Rd>,<Rn>,<Rm>
tASSERT (ntBITS (4, 7) == 0);
* ainstr = 0xE1A00050;
if (! in_IT_block ())
* ainstr |= (tBIT (4) << 20);
* ainstr |= (ntBITS (0, 3) << 8); // Rm
* ainstr |= tBITS (0, 3); // Rn
}
* ainstr |= (ntBITS (8, 11) << 12); // Rd
* pvalid = t_decoded;
break;
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0xD3: // ROR{S}<c>.W <Rd>,<Rn>,<Rm>
tASSERT (ntBITS (12, 15) == 15);
tASSERT (ntBITS (4, 7) == 0);
* ainstr = 0xE1A00070;
if (! in_IT_block ())
* ainstr |= (tBIT (4) << 20);
* ainstr |= (ntBITS (8, 11) << 12); // Rd
* ainstr |= (ntBITS (0, 3) << 8); // Rm
* ainstr |= (tBITS (0, 3) << 0); // Rn
* pvalid = t_decoded;
break;
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0xD4:
{
ARMword Rn = tBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
ARMword Rm = ntBITS (0, 3);
tASSERT (ntBITS (12, 15) == 15);
if (ntBITS (4, 7) == 8)
{
// REV<c>.W <Rd>,<Rm>
ARMword val = state->Reg[Rm];
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
tASSERT (Rm == Rn);
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
state->Reg [Rd] =
(val >> 24)
| ((val >> 8) & 0xFF00)
| ((val << 8) & 0xFF0000)
| (val << 24);
* pvalid = t_resolved;
}
else
{
tASSERT (ntBITS (4, 7) == 4);
if (tBIT (4) == 1)
// UADD8<c> <Rd>,<Rn>,<Rm>
* ainstr = 0xE6500F10;
else
// UADD16<c> <Rd>,<Rn>,<Rm>
* ainstr = 0xE6500F90;
* ainstr |= (Rn << 16);
* ainstr |= (Rd << 12);
* ainstr |= (Rm << 0);
* pvalid = t_decoded;
}
break;
}
case 0xD5:
{
ARMword Rn = tBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
ARMword Rm = ntBITS (0, 3);
tASSERT (ntBITS (12, 15) == 15);
tASSERT (ntBITS (4, 7) == 8);
if (tBIT (4))
{
// CLZ<c> <Rd>,<Rm>
tASSERT (Rm == Rn);
* ainstr = 0xE16F0F10;
}
else
{
// SEL<c> <Rd>,<Rn>,<Rm>
* ainstr = 0xE6800FB0;
* ainstr |= (Rn << 16);
}
* ainstr |= (Rd << 12);
* ainstr |= (Rm << 0);
* pvalid = t_decoded;
break;
}
case 0xD8: // MUL
{
ARMword Rn = tBITS (0, 3);
ARMword Rm = ntBITS (0, 3);
ARMword Rd = ntBITS (8, 11);
ARMword Ra = ntBITS (12, 15);
if (tBIT (4))
{
// SMLA<x><y><c> <Rd>,<Rn>,<Rm>,<Ra>
ARMword nval = state->Reg[Rn];
ARMword mval = state->Reg[Rm];
ARMword res;
tASSERT (ntBITS (6, 7) == 0);
tASSERT (Ra != 15);
if (ntBIT (5))
nval >>= 16;
else
nval &= 0xFFFF;
if (ntBIT (4))
mval >>= 16;
else
mval &= 0xFFFF;
res = nval * mval;
res += state->Reg[Ra];
// FIXME: Test and clear/set the Q bit.
state->Reg[Rd] = res;
}
else
{
if (ntBITS (4, 7) == 1)
{
// MLS<c> <Rd>,<Rn>,<Rm>,<Ra>
state->Reg[Rd] = state->Reg[Ra] - (state->Reg[Rn] * state->Reg[Rm]);
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
}
else
{
tASSERT (ntBITS (4, 7) == 0);
if (Ra == 15)
// MUL<c> <Rd>,<Rn>,<Rm>
state->Reg[Rd] = state->Reg[Rn] * state->Reg[Rm];
else
// MLA<c> <Rd>,<Rn>,<Rm>,<Ra>
state->Reg[Rd] = state->Reg[Rn] * state->Reg[Rm] + state->Reg[Ra];
}
}
* pvalid = t_resolved;
break;
}
case 0xDC: // SMULL
tASSERT (tBIT (4) == 0);
tASSERT (ntBITS (4, 7) == 0);
* ainstr = 0xE0C00090;
* ainstr |= (ntBITS (8, 11) << 16); // RdHi
* ainstr |= (ntBITS (12, 15) << 12); // RdLo
* ainstr |= (ntBITS (0, 3) << 8); // Rm
* ainstr |= tBITS (0, 3); // Rn
* pvalid = t_decoded;
break;
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0xDD: // UMULL
tASSERT (tBIT (4) == 0);
tASSERT (ntBITS (4, 7) == 0);
* ainstr = 0xE0800090;
* ainstr |= (ntBITS (8, 11) << 16); // RdHi
* ainstr |= (ntBITS (12, 15) << 12); // RdLo
* ainstr |= (ntBITS (0, 3) << 8); // Rm
* ainstr |= tBITS (0, 3); // Rn
* pvalid = t_decoded;
break;
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0xDF: // UMLAL
tASSERT (tBIT (4) == 0);
tASSERT (ntBITS (4, 7) == 0);
* ainstr = 0xE0A00090;
* ainstr |= (ntBITS (8, 11) << 16); // RdHi
* ainstr |= (ntBITS (12, 15) << 12); // RdLo
* ainstr |= (ntBITS (0, 3) << 8); // Rm
* ainstr |= tBITS (0, 3); // Rn
* pvalid = t_decoded;
break;
default:
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
fprintf (stderr, "(op = %x) ", tBITS (5,12));
tASSERT (0);
return;
}
/* Tell the Thumb decoder to skip the next 16-bit insn - it was
part of this insn - unless this insn has changed the PC. */
skipping_32bit_thumb = pc + 2;
}
/* Attempt to emulate an ARMv6 instruction.
Stores t_branch into PVALUE upon success or t_undefined otherwise. */
static void
handle_v6_thumb_insn (ARMul_State * state,
ARMword tinstr,
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
ARMword next_instr,
ARMword pc,
ARMword * ainstr,
tdstate * pvalid)
{
if (! state->is_v6)
{
* pvalid = t_undefined;
return;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
if (tBITS (12, 15) == 0xB
&& tBIT (10) == 0
&& tBIT (8) == 1)
{
// Conditional branch forwards.
ARMword Rn = tBITS (0, 2);
ARMword imm5 = tBIT (9) << 5 | tBITS (3, 7);
if (tBIT (11))
{
if (state->Reg[Rn] != 0)
{
state->Reg[15] = (pc + 4 + imm5 * 2);
FLUSHPIPE;
}
}
else
{
if (state->Reg[Rn] == 0)
{
state->Reg[15] = (pc + 4 + imm5 * 2);
FLUSHPIPE;
}
}
* pvalid = t_branch;
return;
}
switch (tinstr & 0xFFC0)
{
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0x4400:
case 0x4480:
case 0x4440:
case 0x44C0: // ADD
{
ARMword Rd = (tBIT (7) << 3) | tBITS (0, 2);
ARMword Rm = tBITS (3, 6);
state->Reg[Rd] += state->Reg[Rm];
break;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0x4600: // MOV<c> <Rd>,<Rm>
{
// instr [15, 8] = 0100 0110
// instr [7] = Rd<high>
// instr [6,3] = Rm
// instr [2,0] = Rd<low>
ARMword Rd = (tBIT(7) << 3) | tBITS (0, 2);
// FIXME: Check for Rd == 15 and ITblock.
state->Reg[Rd] = state->Reg[tBITS (3, 6)];
break;
}
case 0xBF00:
case 0xBF40:
case 0xBF80:
case 0xBFC0:
handle_IT_block (state, tinstr, pvalid);
return;
case 0xE840:
case 0xE880: // LDMIA
case 0xE8C0:
case 0xE900: // STM
case 0xE940:
case 0xE980:
case 0xE9C0: // LDRD
case 0xEA00: // BIC
case 0xEA40: // ORR
case 0xEA80: // EOR
case 0xEAC0:
case 0xEB00: // ADD
case 0xEB40: // SBC
case 0xEB80: // SUB
case 0xEBC0: // RSB
case 0xFA80: // UADD, SEL
handle_T2_insn (state, tinstr, next_instr, pc, ainstr, pvalid);
return;
case 0xba00: /* rev */
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
{
ARMword val = state->Reg[tBITS (3, 5)];
state->Reg [tBITS (0, 2)] =
(val >> 24)
| ((val >> 8) & 0xFF00)
| ((val << 8) & 0xFF0000)
| (val << 24);
break;
}
case 0xba40: /* rev16 */
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
{
ARMword val = state->Reg[tBITS (3, 5)];
state->Reg [tBITS (0, 2)] = (val >> 16) | (val << 16);
break;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 0xb660: /* cpsie */
case 0xb670: /* cpsid */
case 0xbac0: /* revsh */
case 0xb650: /* setend */
default:
printf ("Unhandled v6 thumb insn: %04x\n", tinstr);
* pvalid = t_undefined;
return;
case 0xb200: /* sxth */
{
ARMword Rm = state->Reg [(tinstr & 0x38) >> 3];
if (Rm & 0x8000)
state->Reg [(tinstr & 0x7)] = (Rm & 0xffff) | 0xffff0000;
else
state->Reg [(tinstr & 0x7)] = Rm & 0xffff;
break;
}
case 0xb240: /* sxtb */
{
ARMword Rm = state->Reg [(tinstr & 0x38) >> 3];
if (Rm & 0x80)
state->Reg [(tinstr & 0x7)] = (Rm & 0xff) | 0xffffff00;
else
state->Reg [(tinstr & 0x7)] = Rm & 0xff;
break;
}
case 0xb280: /* uxth */
{
ARMword Rm = state->Reg [(tinstr & 0x38) >> 3];
state->Reg [(tinstr & 0x7)] = Rm & 0xffff;
break;
}
case 0xb2c0: /* uxtb */
{
ARMword Rm = state->Reg [(tinstr & 0x38) >> 3];
state->Reg [(tinstr & 0x7)] = Rm & 0xff;
break;
}
}
/* Indicate that the instruction has been processed. */
* pvalid = t_branch;
}
/* Decode a 16bit Thumb instruction. The instruction is in the low
16-bits of the tinstr field, with the following Thumb instruction
held in the high 16-bits. Passing in two Thumb instructions allows
easier simulation of the special dual BL instruction. */
tdstate
ARMul_ThumbDecode (ARMul_State * state,
ARMword pc,
ARMword tinstr,
ARMword * ainstr)
{
2000-02-05 08:30:26 +01:00
tdstate valid = t_decoded; /* default assumes a valid instruction */
ARMword next_instr;
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
ARMword old_tinstr = tinstr;
if (skipping_32bit_thumb == pc)
{
skipping_32bit_thumb = 0;
return t_branch;
}
skipping_32bit_thumb = 0;
2000-02-05 08:30:26 +01:00
if (state->bigendSig)
{
next_instr = tinstr & 0xFFFF;
tinstr >>= 16;
}
else
{
next_instr = tinstr >> 16;
tinstr &= 0xFFFF;
}
2000-02-05 08:30:26 +01:00
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
if (! IT_block_allow (state))
{
if ( tBITS (11, 15) == 0x1F
|| tBITS (11, 15) == 0x1E
|| tBITS (11, 15) == 0x1D)
{
if (trace)
fprintf (stderr, "pc: %x, SKIP instr: %04x|%04x\n",
pc & ~1, tinstr, next_instr);
skipping_32bit_thumb = pc + 2;
}
else if (trace)
fprintf (stderr, "pc: %x, SKIP instr: %04x\n", pc & ~1, tinstr);
return t_branch;
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
old_tinstr = tinstr;
if (trace)
fprintf (stderr, "pc: %x, Thumb instr: %x", pc & ~1, tinstr);
2000-02-05 08:30:26 +01:00
#if 1 /* debugging to catch non updates */
*ainstr = 0xDEADC0DE;
#endif
switch ((tinstr & 0xF800) >> 11)
{
2000-02-05 08:30:26 +01:00
case 0: /* LSL */
case 1: /* LSR */
case 2: /* ASR */
/* Format 1 */
2000-02-05 08:30:26 +01:00
*ainstr = 0xE1B00000 /* base opcode */
| ((tinstr & 0x1800) >> (11 - 5)) /* shift type */
| ((tinstr & 0x07C0) << (7 - 6)) /* imm5 */
| ((tinstr & 0x0038) >> 3) /* Rs */
| ((tinstr & 0x0007) << 12); /* Rd */
break;
2000-02-05 08:30:26 +01:00
case 3: /* ADD/SUB */
/* Format 2 */
{
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
ARMword subset[4] =
{
0xE0900000, /* ADDS Rd,Rs,Rn */
0xE0500000, /* SUBS Rd,Rs,Rn */
0xE2900000, /* ADDS Rd,Rs,#imm3 */
0xE2500000 /* SUBS Rd,Rs,#imm3 */
};
2000-02-05 08:30:26 +01:00
/* It is quicker indexing into a table, than performing switch
or conditionals: */
*ainstr = subset[(tinstr & 0x0600) >> 9] /* base opcode */
| ((tinstr & 0x01C0) >> 6) /* Rn or imm3 */
| ((tinstr & 0x0038) << (16 - 3)) /* Rs */
| ((tinstr & 0x0007) << (12 - 0)); /* Rd */
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
if (in_IT_block ())
*ainstr &= ~ (1 << 20);
}
break;
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 4:
* ainstr = 0xE3A00000; /* MOV Rd,#imm8 */
if (! in_IT_block ())
* ainstr |= (1 << 20);
* ainstr |= tBITS (8, 10) << 12;
* ainstr |= tBITS (0, 7);
2000-02-05 08:30:26 +01:00
break;
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 5:
* ainstr = 0xE3500000; /* CMP Rd,#imm8 */
* ainstr |= tBITS (8, 10) << 16;
* ainstr |= tBITS (0, 7);
break;
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
case 6:
case 7:
* ainstr = tBIT (11)
? 0xE2400000 /* SUB Rd,Rd,#imm8 */
: 0xE2800000; /* ADD Rd,Rd,#imm8 */
if (! in_IT_block ())
* ainstr |= (1 << 20);
* ainstr |= tBITS (8, 10) << 12;
* ainstr |= tBITS (8, 10) << 16;
* ainstr |= tBITS (0, 7);
break;
2000-02-05 08:30:26 +01:00
case 8: /* Arithmetic and high register transfers */
/* TODO: Since the subsets for both Format 4 and Format 5
instructions are made up of different ARM encodings, we could
save the following conditional, and just have one large
subset. */
if ((tinstr & (1 << 10)) == 0)
2000-02-05 08:30:26 +01:00
{
/* Format 4 */
struct
{
ARMword opcode;
enum
{ t_norm, t_shift, t_neg, t_mul }
otype;
}
subset[16] =
{
{ 0xE0100000, t_norm}, /* ANDS Rd,Rd,Rs */
{ 0xE0300000, t_norm}, /* EORS Rd,Rd,Rs */
{ 0xE1B00010, t_shift}, /* MOVS Rd,Rd,LSL Rs */
{ 0xE1B00030, t_shift}, /* MOVS Rd,Rd,LSR Rs */
{ 0xE1B00050, t_shift}, /* MOVS Rd,Rd,ASR Rs */
{ 0xE0B00000, t_norm}, /* ADCS Rd,Rd,Rs */
{ 0xE0D00000, t_norm}, /* SBCS Rd,Rd,Rs */
{ 0xE1B00070, t_shift}, /* MOVS Rd,Rd,ROR Rs */
{ 0xE1100000, t_norm}, /* TST Rd,Rs */
{ 0xE2700000, t_neg}, /* RSBS Rd,Rs,#0 */
{ 0xE1500000, t_norm}, /* CMP Rd,Rs */
{ 0xE1700000, t_norm}, /* CMN Rd,Rs */
{ 0xE1900000, t_norm}, /* ORRS Rd,Rd,Rs */
{ 0xE0100090, t_mul} , /* MULS Rd,Rd,Rs */
{ 0xE1D00000, t_norm}, /* BICS Rd,Rd,Rs */
{ 0xE1F00000, t_norm} /* MVNS Rd,Rs */
};
*ainstr = subset[(tinstr & 0x03C0) >> 6].opcode; /* base */
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
if (in_IT_block ())
{
struct
{
ARMword opcode;
enum
{ t_norm, t_shift, t_neg, t_mul }
otype;
}
subset[16] =
{
{ 0xE0000000, t_norm}, /* AND Rd,Rd,Rs */
{ 0xE0200000, t_norm}, /* EOR Rd,Rd,Rs */
{ 0xE1A00010, t_shift}, /* MOV Rd,Rd,LSL Rs */
{ 0xE1A00030, t_shift}, /* MOV Rd,Rd,LSR Rs */
{ 0xE1A00050, t_shift}, /* MOV Rd,Rd,ASR Rs */
{ 0xE0A00000, t_norm}, /* ADC Rd,Rd,Rs */
{ 0xE0C00000, t_norm}, /* SBC Rd,Rd,Rs */
{ 0xE1A00070, t_shift}, /* MOV Rd,Rd,ROR Rs */
{ 0xE1100000, t_norm}, /* TST Rd,Rs */
{ 0xE2600000, t_neg}, /* RSB Rd,Rs,#0 */
{ 0xE1500000, t_norm}, /* CMP Rd,Rs */
{ 0xE1700000, t_norm}, /* CMN Rd,Rs */
{ 0xE1800000, t_norm}, /* ORR Rd,Rd,Rs */
{ 0xE0000090, t_mul} , /* MUL Rd,Rd,Rs */
{ 0xE1C00000, t_norm}, /* BIC Rd,Rd,Rs */
{ 0xE1E00000, t_norm} /* MVN Rd,Rs */
};
*ainstr = subset[(tinstr & 0x03C0) >> 6].opcode; /* base */
}
2000-02-05 08:30:26 +01:00
switch (subset[(tinstr & 0x03C0) >> 6].otype)
{
case t_norm:
*ainstr |= ((tinstr & 0x0007) << 16) /* Rn */
| ((tinstr & 0x0007) << 12) /* Rd */
| ((tinstr & 0x0038) >> 3); /* Rs */
break;
case t_shift:
*ainstr |= ((tinstr & 0x0007) << 12) /* Rd */
| ((tinstr & 0x0007) >> 0) /* Rm */
| ((tinstr & 0x0038) << (8 - 3)); /* Rs */
break;
case t_neg:
*ainstr |= ((tinstr & 0x0007) << 12) /* Rd */
| ((tinstr & 0x0038) << (16 - 3)); /* Rn */
break;
case t_mul:
*ainstr |= ((tinstr & 0x0007) << 16) /* Rd */
| ((tinstr & 0x0007) << 8) /* Rs */
| ((tinstr & 0x0038) >> 3); /* Rm */
break;
}
}
else
2000-02-05 08:30:26 +01:00
{
/* Format 5 */
ARMword Rd = ((tinstr & 0x0007) >> 0);
ARMword Rs = ((tinstr & 0x0038) >> 3);
if (tinstr & (1 << 7))
Rd += 8;
if (tinstr & (1 << 6))
Rs += 8;
switch ((tinstr & 0x03C0) >> 6)
{
case 0x1: /* ADD Rd,Rd,Hs */
case 0x2: /* ADD Hd,Hd,Rs */
case 0x3: /* ADD Hd,Hd,Hs */
*ainstr = 0xE0800000 /* base */
| (Rd << 16) /* Rn */
| (Rd << 12) /* Rd */
| (Rs << 0); /* Rm */
break;
case 0x5: /* CMP Rd,Hs */
case 0x6: /* CMP Hd,Rs */
case 0x7: /* CMP Hd,Hs */
*ainstr = 0xE1500000 /* base */
| (Rd << 16) /* Rn */
| (Rd << 12) /* Rd */
| (Rs << 0); /* Rm */
break;
case 0x9: /* MOV Rd,Hs */
case 0xA: /* MOV Hd,Rs */
case 0xB: /* MOV Hd,Hs */
*ainstr = 0xE1A00000 /* base */
| (Rd << 12) /* Rd */
| (Rs << 0); /* Rm */
break;
case 0xC: /* BX Rs */
case 0xD: /* BX Hs */
*ainstr = 0xE12FFF10 /* base */
| ((tinstr & 0x0078) >> 3); /* Rd */
break;
case 0xE: /* UNDEFINED */
case 0xF: /* UNDEFINED */
if (state->is_v5)
{
/* BLX Rs; BLX Hs */
*ainstr = 0xE12FFF30 /* base */
| ((tinstr & 0x0078) >> 3); /* Rd */
break;
}
/* Drop through. */
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
default:
2000-02-05 08:30:26 +01:00
case 0x0: /* UNDEFINED */
case 0x4: /* UNDEFINED */
case 0x8: /* UNDEFINED */
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
handle_v6_thumb_insn (state, tinstr, next_instr, pc, ainstr, & valid);
2000-02-05 08:30:26 +01:00
break;
}
}
break;
2000-02-05 08:30:26 +01:00
case 9: /* LDR Rd,[PC,#imm8] */
/* Format 6 */
2000-02-05 08:30:26 +01:00
*ainstr = 0xE59F0000 /* base */
| ((tinstr & 0x0700) << (12 - 8)) /* Rd */
| ((tinstr & 0x00FF) << (2 - 0)); /* off8 */
break;
case 10:
case 11:
/* TODO: Format 7 and Format 8 perform the same ARM encoding, so
the following could be merged into a single subset, saving on
the following boolean: */
if ((tinstr & (1 << 9)) == 0)
2000-02-05 08:30:26 +01:00
{
/* Format 7 */
ARMword subset[4] = {
0xE7800000, /* STR Rd,[Rb,Ro] */
0xE7C00000, /* STRB Rd,[Rb,Ro] */
0xE7900000, /* LDR Rd,[Rb,Ro] */
0xE7D00000 /* LDRB Rd,[Rb,Ro] */
};
*ainstr = subset[(tinstr & 0x0C00) >> 10] /* base */
| ((tinstr & 0x0007) << (12 - 0)) /* Rd */
| ((tinstr & 0x0038) << (16 - 3)) /* Rb */
| ((tinstr & 0x01C0) >> 6); /* Ro */
}
else
2000-02-05 08:30:26 +01:00
{
/* Format 8 */
ARMword subset[4] = {
0xE18000B0, /* STRH Rd,[Rb,Ro] */
0xE19000D0, /* LDRSB Rd,[Rb,Ro] */
0xE19000B0, /* LDRH Rd,[Rb,Ro] */
0xE19000F0 /* LDRSH Rd,[Rb,Ro] */
};
*ainstr = subset[(tinstr & 0x0C00) >> 10] /* base */
| ((tinstr & 0x0007) << (12 - 0)) /* Rd */
| ((tinstr & 0x0038) << (16 - 3)) /* Rb */
| ((tinstr & 0x01C0) >> 6); /* Ro */
}
break;
2000-02-05 08:30:26 +01:00
case 12: /* STR Rd,[Rb,#imm5] */
case 13: /* LDR Rd,[Rb,#imm5] */
case 14: /* STRB Rd,[Rb,#imm5] */
case 15: /* LDRB Rd,[Rb,#imm5] */
/* Format 9 */
{
2000-02-05 08:30:26 +01:00
ARMword subset[4] = {
0xE5800000, /* STR Rd,[Rb,#imm5] */
0xE5900000, /* LDR Rd,[Rb,#imm5] */
0xE5C00000, /* STRB Rd,[Rb,#imm5] */
0xE5D00000 /* LDRB Rd,[Rb,#imm5] */
};
/* The offset range defends on whether we are transferring a
byte or word value: */
*ainstr = subset[(tinstr & 0x1800) >> 11] /* base */
| ((tinstr & 0x0007) << (12 - 0)) /* Rd */
| ((tinstr & 0x0038) << (16 - 3)) /* Rb */
| ((tinstr & 0x07C0) >> (6 - ((tinstr & (1 << 12)) ? 0 : 2))); /* off5 */
}
break;
2000-02-05 08:30:26 +01:00
case 16: /* STRH Rd,[Rb,#imm5] */
case 17: /* LDRH Rd,[Rb,#imm5] */
/* Format 10 */
2000-02-05 08:30:26 +01:00
*ainstr = ((tinstr & (1 << 11)) /* base */
? 0xE1D000B0 /* LDRH */
: 0xE1C000B0) /* STRH */
| ((tinstr & 0x0007) << (12 - 0)) /* Rd */
| ((tinstr & 0x0038) << (16 - 3)) /* Rb */
| ((tinstr & 0x01C0) >> (6 - 1)) /* off5, low nibble */
| ((tinstr & 0x0600) >> (9 - 8)); /* off5, high nibble */
break;
2000-02-05 08:30:26 +01:00
case 18: /* STR Rd,[SP,#imm8] */
case 19: /* LDR Rd,[SP,#imm8] */
/* Format 11 */
2000-02-05 08:30:26 +01:00
*ainstr = ((tinstr & (1 << 11)) /* base */
? 0xE59D0000 /* LDR */
: 0xE58D0000) /* STR */
| ((tinstr & 0x0700) << (12 - 8)) /* Rd */
| ((tinstr & 0x00FF) << 2); /* off8 */
break;
2000-02-05 08:30:26 +01:00
case 20: /* ADD Rd,PC,#imm8 */
case 21: /* ADD Rd,SP,#imm8 */
/* Format 12 */
if ((tinstr & (1 << 11)) == 0)
2000-02-05 08:30:26 +01:00
{
/* NOTE: The PC value used here should by word aligned */
/* We encode shift-left-by-2 in the rotate immediate field,
so no shift of off8 is needed. */
2000-02-05 08:30:26 +01:00
*ainstr = 0xE28F0F00 /* base */
| ((tinstr & 0x0700) << (12 - 8)) /* Rd */
| (tinstr & 0x00FF); /* off8 */
}
else
2000-02-05 08:30:26 +01:00
{
/* We encode shift-left-by-2 in the rotate immediate field,
so no shift of off8 is needed. */
2000-02-05 08:30:26 +01:00
*ainstr = 0xE28D0F00 /* base */
| ((tinstr & 0x0700) << (12 - 8)) /* Rd */
| (tinstr & 0x00FF); /* off8 */
}
break;
case 22:
case 23:
switch (tinstr & 0x0F00)
2000-02-05 08:30:26 +01:00
{
case 0x0000:
2000-02-05 08:30:26 +01:00
/* Format 13 */
/* NOTE: The instruction contains a shift left of 2
equivalent (implemented as ROR #30): */
2000-02-05 08:30:26 +01:00
*ainstr = ((tinstr & (1 << 7)) /* base */
? 0xE24DDF00 /* SUB */
: 0xE28DDF00) /* ADD */
| (tinstr & 0x007F); /* off7 */
break;
case 0x0400:
/* Format 14 - Push */
* ainstr = 0xE92D0000 | (tinstr & 0x00FF);
break;
case 0x0500:
/* Format 14 - Push + LR */
* ainstr = 0xE92D4000 | (tinstr & 0x00FF);
break;
case 0x0c00:
/* Format 14 - Pop */
* ainstr = 0xE8BD0000 | (tinstr & 0x00FF);
break;
case 0x0d00:
/* Format 14 - Pop + PC */
* ainstr = 0xE8BD8000 | (tinstr & 0x00FF);
break;
case 0x0e00:
if (state->is_v5)
{
/* This is normally an undefined instruction. The v5t architecture
defines this particular pattern as a BKPT instruction, for
hardware assisted debugging. We map onto the arm BKPT
instruction. */
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
if (state->is_v6)
// Map to the SVC instruction instead of the BKPT instruction.
* ainstr = 0xEF000000 | tBITS (0, 7);
else
* ainstr = 0xE1200070 | ((tinstr & 0xf0) << 4) | (tinstr & 0xf);
break;
}
/* Drop through. */
default:
/* Everything else is an undefined instruction. */
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
handle_v6_thumb_insn (state, tinstr, next_instr, pc, ainstr, & valid);
break;
2000-02-05 08:30:26 +01:00
}
break;
2000-02-05 08:30:26 +01:00
case 24: /* STMIA */
case 25: /* LDMIA */
/* Format 15 */
2000-02-05 08:30:26 +01:00
*ainstr = ((tinstr & (1 << 11)) /* base */
? 0xE8B00000 /* LDMIA */
: 0xE8A00000) /* STMIA */
| ((tinstr & 0x0700) << (16 - 8)) /* Rb */
| (tinstr & 0x00FF); /* mask8 */
break;
2000-02-05 08:30:26 +01:00
case 26: /* Bcc */
case 27: /* Bcc/SWI */
if ((tinstr & 0x0F00) == 0x0F00)
2000-02-05 08:30:26 +01:00
{
/* Format 17 : SWI */
*ainstr = 0xEF000000;
/* Breakpoint must be handled specially. */
if ((tinstr & 0x00FF) == 0x18)
*ainstr |= ((tinstr & 0x00FF) << 16);
1999-04-26 20:34:20 +02:00
/* New breakpoint value. See gdb/arm-tdep.c */
else if ((tinstr & 0x00FF) == 0xFE)
2000-02-05 08:30:26 +01:00
*ainstr |= SWI_Breakpoint;
else
*ainstr |= (tinstr & 0x00FF);
2000-02-05 08:30:26 +01:00
}
else if ((tinstr & 0x0F00) != 0x0E00)
2000-02-05 08:30:26 +01:00
{
/* Format 16 */
int doit = FALSE;
/* TODO: Since we are doing a switch here, we could just add
the SWI and undefined instruction checks into this
switch to same on a couple of conditionals: */
switch ((tinstr & 0x0F00) >> 8)
{
case EQ:
doit = ZFLAG;
break;
case NE:
doit = !ZFLAG;
break;
case VS:
doit = VFLAG;
break;
case VC:
doit = !VFLAG;
break;
case MI:
doit = NFLAG;
break;
case PL:
doit = !NFLAG;
break;
case CS:
doit = CFLAG;
break;
case CC:
doit = !CFLAG;
break;
case HI:
doit = (CFLAG && !ZFLAG);
break;
case LS:
doit = (!CFLAG || ZFLAG);
break;
case GE:
doit = ((!NFLAG && !VFLAG) || (NFLAG && VFLAG));
break;
case LT:
doit = ((NFLAG && !VFLAG) || (!NFLAG && VFLAG));
break;
case GT:
doit = ((!NFLAG && !VFLAG && !ZFLAG)
|| (NFLAG && VFLAG && !ZFLAG));
break;
case LE:
doit = ((NFLAG && !VFLAG) || (!NFLAG && VFLAG)) || ZFLAG;
break;
}
if (doit)
{
state->Reg[15] = (pc + 4
+ (((tinstr & 0x7F) << 1)
| ((tinstr & (1 << 7)) ? 0xFFFFFF00 : 0)));
FLUSHPIPE;
}
valid = t_branch;
}
else
/* UNDEFINED : cc=1110(AL) uses different format. */
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
handle_v6_thumb_insn (state, tinstr, next_instr, pc, ainstr, & valid);
break;
2000-02-05 08:30:26 +01:00
case 28: /* B */
/* Format 18 */
2000-02-05 08:30:26 +01:00
state->Reg[15] = (pc + 4
+ (((tinstr & 0x3FF) << 1)
| ((tinstr & (1 << 10)) ? 0xFFFFF800 : 0)));
FLUSHPIPE;
valid = t_branch;
break;
2000-02-05 08:30:26 +01:00
case 29: /* UNDEFINED */
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
if (state->is_v6)
{
handle_v6_thumb_insn (state, tinstr, next_instr, pc, ainstr, & valid);
break;
}
if (state->is_v5)
{
if (tinstr & 1)
{
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
handle_v6_thumb_insn (state, tinstr, next_instr, pc, ainstr, & valid);
break;
}
/* Drop through. */
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
/* Format 19 */
/* There is no single ARM instruction equivalent for this
instruction. Also, it should only ever be matched with the
fmt19 "BL/BLX instruction 1" instruction. However, we do
allow the simulation of it on its own, with undefined results
if r14 is not suitably initialised. */
{
ARMword tmp = (pc + 2);
state->Reg[15] = ((state->Reg[14] + ((tinstr & 0x07FF) << 1))
& 0xFFFFFFFC);
CLEART;
state->Reg[14] = (tmp | 1);
valid = t_branch;
FLUSHPIPE;
if (trace_funcs)
fprintf (stderr, " pc changed to %x\n", state->Reg[15]);
break;
}
}
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
handle_v6_thumb_insn (state, tinstr, next_instr, pc, ainstr, & valid);
break;
2000-02-05 08:30:26 +01:00
case 30: /* BL instruction 1 */
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
if (state->is_v6)
{
handle_T2_insn (state, tinstr, next_instr, pc, ainstr, & valid);
break;
}
/* Format 19 */
/* There is no single ARM instruction equivalent for this Thumb
instruction. To keep the simulation simple (from the user
perspective) we check if the following instruction is the
second half of this BL, and if it is we simulate it
2000-02-05 08:30:26 +01:00
immediately. */
state->Reg[14] = state->Reg[15] \
+ (((tinstr & 0x07FF) << 12) \
| ((tinstr & (1 << 10)) ? 0xFF800000 : 0));
2000-02-05 08:30:26 +01:00
valid = t_branch; /* in-case we don't have the 2nd half */
tinstr = next_instr; /* move the instruction down */
2001-03-06 23:33:47 +01:00
pc += 2; /* point the pc at the 2nd half */
if (((tinstr & 0xF800) >> 11) != 31)
{
if (((tinstr & 0xF800) >> 11) == 29)
{
2001-03-06 23:33:47 +01:00
ARMword tmp = (pc + 2);
state->Reg[15] = ((state->Reg[14]
+ ((tinstr & 0x07FE) << 1))
2001-03-06 23:33:47 +01:00
& 0xFFFFFFFC);
CLEART;
state->Reg[14] = (tmp | 1);
valid = t_branch;
FLUSHPIPE;
}
2001-03-06 23:33:47 +01:00
else
/* Exit, since not correct instruction. */
pc -= 2;
break;
}
/* else we fall through to process the second half of the BL */
pc += 2; /* point the pc at the 2nd half */
2000-02-05 08:30:26 +01:00
case 31: /* BL instruction 2 */
Add support for ARM v6 instructions. * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. * armdefs.h (ARMdval, ARMfval): New types. (ARM_VFP_reg): New union. (struct ARMul_State): Add VFP_Reg and FPSCR fields. (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor macros for the new VFP_Reg field. * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX instructions. (handle_VFP_move): New function. (ARMul_Emulate16): Add checks for newly supported v6 instructions. Add support for VMRS, VMOV and MRC instructions. (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when operating in v6 mode. * armemu.h (t_resolved): Define. * armsupp.c: Include math.h. (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, VSTM, VLDM and VPOP instructions. (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the new handle_VFP_xfer function. (ARMul_STC): Likewise. (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, VCMPE and VCVT instructions. (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the new handle_VFP_op function. * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. (test_cond): New function. Tests a condition and returns non-zero if the condition has been met. (handle_IT_block): New function. (in_IT_block): New function. (IT_block_allow): New function. (ThumbExpandImm): New function. (handle_T2_insn): New function. Handles T2 thumb instructions. (handle_v6_thumb_insn): Add next_instr and pc parameters. (ARMul_ThumbDecode): Add support for IT blocks. Add support for v6 instructions. * wrapper.c (sim_create_inferior): Detect a thumb address and call SETT appropriately.
2015-06-28 20:14:36 +02:00
if (state->is_v6)
{
handle_T2_insn (state, old_tinstr, next_instr, pc, ainstr, & valid);
break;
}
/* Format 19 */
/* There is no single ARM instruction equivalent for this
instruction. Also, it should only ever be matched with the
fmt19 "BL instruction 1" instruction. However, we do allow
the simulation of it on its own, with undefined results if
2000-02-05 08:30:26 +01:00
r14 is not suitably initialised. */
{
ARMword tmp = pc;
2000-02-05 08:30:26 +01:00
state->Reg[15] = (state->Reg[14] + ((tinstr & 0x07FF) << 1));
state->Reg[14] = (tmp | 1);
valid = t_branch;
FLUSHPIPE;
}
break;
}
if (trace && valid != t_decoded)
fprintf (stderr, "\n");
return valid;
}