binutils-gdb/gdb/gdbserver/mem-break.h

188 lines
5.8 KiB
C
Raw Normal View History

/* Memory breakpoint interfaces for the remote server for GDB.
Copyright (C) 2002-2013 Free Software Foundation, Inc.
Contributed by MontaVista Software.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#ifndef MEM_BREAK_H
#define MEM_BREAK_H
/* Breakpoints are opaque. */
struct breakpoint;
gdb/gdbserver/ 2010-06-01 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> * Makefile.in (IPA_DEPFILES, extra_libraries): New. (all): Depend on $(extra_libraries). (install-only): Install the IPA. (IPA_OBJS, IPA_LIB): New. (clean): Remove the IPA lib. (IPAGENT_CFLAGS): New. (tracepoint-ipa.o, utils-ipa.o, remote-utils-ipa.o) (regcache-ipa.o, i386-linux-ipa.o, linux-i386-ipa.o) (linux-amd64-ipa.o, amd64-linux-ipa.o): New rules. * linux-amd64-ipa.c, linux-i386-ipa.c: New files. * configure.ac: Check for atomic builtins support in the compiler. (IPA_DEPFILES, extra_libraries): Define. * configure.srv (ipa_obj): Add description. (ipa_i386_linux_regobj, ipa_amd64_linux_regobj): Define. (i[34567]86-*-linux*): Set ipa_obj. (x86_64-*-linux*): Set ipa_obj. * linux-low.c (stabilizing_threads): New. (supports_fast_tracepoints): New. (linux_detach): Stabilize threads before detaching. (handle_tracepoints): Handle internal tracing breakpoints. Assert the lwp is either not stabilizing, or is moving out of a jump pad. (linux_fast_tracepoint_collecting): New. (maybe_move_out_of_jump_pad): New. (enqueue_one_deferred_signal): New. (dequeue_one_deferred_signal): New. (linux_wait_for_event_1): If moving out of a jump pad, defer pending signals to later. (linux_stabilize_threads): New. (linux_wait_1): Check if threads need moving out of jump pads, and do it if so. (stuck_in_jump_pad_callback): New. (move_out_of_jump_pad_callback): New. (lwp_running): New. (linux_resume_one_lwp): Handle moving out of jump pads. (linux_set_resume_request): Dequeue deferred signals. (need_step_over_p): Also step over fast tracepoint jumps. (start_step_over): Also uninsert fast tracepoint jumps. (finish_step_over): Also reinsert fast tracepoint jumps. (linux_install_fast_tracepoint_jump): New. (linux_target_ops): Install linux_stabilize_threads and linux_install_fast_tracepoint_jump_pad. * linux-low.h (linux_target_ops) <get_thread_area, install_fast_tracepoint_jump_pad>: New fields. (struct lwp_info) <collecting_fast_tracepoint, pending_signals_to_report, exit_jump_pad_bkpt>: New fields. (linux_get_thread_area): Declare. * linux-x86-low.c (jump_insn): New. (x86_get_thread_area): New. (append_insns): New. (push_opcode): New. (amd64_install_fast_tracepoint_jump_pad): New. (i386_install_fast_tracepoint_jump_pad): New. (x86_install_fast_tracepoint_jump_pad): New. (the_low_target): Install x86_get_thread_area and x86_install_fast_tracepoint_jump_pad. * mem-break.c (set_raw_breakpoint_at): Use read_inferior_memory. (struct fast_tracepoint_jump): New. (fast_tracepoint_jump_insn): New. (fast_tracepoint_jump_shadow): New. (find_fast_tracepoint_jump_at): New. (fast_tracepoint_jump_here): New. (delete_fast_tracepoint_jump): New. (set_fast_tracepoint_jump): New. (uninsert_fast_tracepoint_jumps_at): New. (reinsert_fast_tracepoint_jumps_at): New. (set_breakpoint_at): Use write_inferior_memory. (uninsert_raw_breakpoint): Use write_inferior_memory. (check_mem_read): Mask out fast tracepoint jumps. (check_mem_write): Mask out fast tracepoint jumps. * mem-break.h (struct fast_tracepoint_jump): Forward declare. (set_fast_tracepoint_jump): Declare. (delete_fast_tracepoint_jump) (fast_tracepoint_jump_here, uninsert_fast_tracepoint_jumps_at) (reinsert_fast_tracepoint_jumps_at): Declare. * regcache.c: Don't compile many functions when building the in-process agent library. (init_register_cache) [IN_PROCESS_AGENT]: Don't allow allocating the register buffer in the heap. (free_register_cache): If the register buffer isn't owned by the regcache, don't free it. (set_register_cache) [IN_PROCESS_AGENT]: Don't re-alocate pre-existing register caches. * remote-utils.c (convert_int_to_ascii): Constify `from' parameter type. (convert_ascii_to_int): : Constify `from' parameter type. (decode_M_packet, decode_X_packet): Replace the `to' parameter by a `to_p' pointer to pointer parameter. If TO_P is NULL, malloc the needed buffer in-place. (relocate_instruction): New. * server.c (handle_query) <qSymbols>: If the target supports tracepoints, give it a chance of looking up symbols. Report support for fast tracepoints. (handle_status): Stabilize threads. (process_serial_event): Adjust. * server.h (struct fast_tracepoint_jump): Forward declare. (struct process_info) <fast_tracepoint_jumps>: New field. (convert_ascii_to_int, convert_int_to_ascii): Adjust. (decode_X_packet, decode_M_packet): Adjust. (relocate_instruction): Declare. (in_process_agent_loaded): Declare. (tracepoint_look_up_symbols): Declare. (struct fast_tpoint_collect_status): Declare. (fast_tracepoint_collecting): Declare. (force_unlock_trace_buffer): Declare. (handle_tracepoint_bkpts): Declare. (initialize_low_tracepoint) (supply_fast_tracepoint_registers) [IN_PROCESS_AGENT]: Declare. * target.h (struct target_ops) <stabilize_threads, install_fast_tracepoint_jump_pad>: New fields. (stabilize_threads, install_fast_tracepoint_jump_pad): New. * tracepoint.c [HAVE_MALLOC_H]: Include malloc.h. [HAVE_STDINT_H]: Include stdint.h. (trace_debug_1): Rename to ... (trace_vdebug): ... this. (trace_debug): Rename to ... (trace_debug_1): ... this. Add `level' parameter. (trace_debug): New. (ATTR_USED, ATTR_NOINLINE): New. (IP_AGENT_EXPORT): New. (gdb_tp_heap_buffer, gdb_jump_pad_buffer, gdb_jump_pad_buffer_end) (collecting, gdb_collect, stop_tracing, flush_trace_buffer) (about_to_request_buffer_space, trace_buffer_is_full) (stopping_tracepoint, expr_eval_result, error_tracepoint) (tracepoints, tracing, trace_buffer_ctrl, trace_buffer_ctrl_curr) (trace_buffer_lo, trace_buffer_hi, traceframe_read_count) (traceframe_write_count, traceframes_created) (trace_state_variables) New renaming defines. (struct ipa_sym_addresses): New. (STRINGIZE_1, STRINGIZE, IPA_SYM): New. (symbol_list): New. (ipa_sym_addrs): New. (all_tracepoint_symbols_looked_up): New. (in_process_agent_loaded): New. (write_e_ipa_not_loaded): New. (maybe_write_ipa_not_loaded): New. (tracepoint_look_up_symbols): New. (debug_threads) [IN_PROCESS_AGENT]: New. (read_inferior_memory) [IN_PROCESS_AGENT]: New. (UNKNOWN_SIDE_EFFECTS): New. (stop_tracing): New. (flush_trace_buffer): New. (stop_tracing_bkpt): New. (flush_trace_buffer_bkpt): New. (read_inferior_integer): New. (read_inferior_uinteger): New. (read_inferior_data_pointer): New. (write_inferior_data_pointer): New. (write_inferior_integer): New. (write_inferior_uinteger): New. (struct collect_static_trace_data_action): Delete. (enum tracepoint_type): New. (struct tracepoint) <type>: New field `type'. <actions_str, step_actions, step_actions_str>: Only include in GDBserver. <orig_size, obj_addr_on_target, adjusted_insn_addr> <adjusted_insn_addr_end, jump_pad, jump_pad_end>: New fields. (tracepoints): Use IP_AGENT_EXPORT. (last_tracepoint): Don't include in the IPA. (stopping_tracepoint): Use IP_AGENT_EXPORT. (trace_buffer_is_full): Use IP_AGENT_EXPORT. (alloced_trace_state_variables): New. (trace_state_variables): Use IP_AGENT_EXPORT. (traceframe_t): Delete unused variable. (circular_trace_buffer): Don't include in the IPA. (trace_buffer_start): Delete. (struct trace_buffer_control): New. (trace_buffer_free): Delete. (struct ipa_trace_buffer_control): New. (GDBSERVER_FLUSH_COUNT_MASK, GDBSERVER_FLUSH_COUNT_MASK_PREV) (GDBSERVER_FLUSH_COUNT_MASK_CURR, GDBSERVER_UPDATED_FLUSH_COUNT_BIT): New. (trace_buffer_ctrl): New. (TRACE_BUFFER_CTRL_CURR): New. (trace_buffer_start, trace_buffer_free, trace_buffer_end_free): Reimplement as macros. (trace_buffer_wrap): Delete. (traceframe_write_count, traceframe_read_count) (traceframes_created, tracing): Use IP_AGENT_EXPORT. (struct tracepoint_hit_ctx) <type>: New field. (struct fast_tracepoint_ctx): New. (memory_barrier): New. (cmpxchg): New. (record_tracepoint_error): Update atomically in the IPA. (clear_inferior_trace_buffer): New. (about_to_request_buffer_space): New. (trace_buffer_alloc): Handle GDBserver and inferior simulatenous updating the same buffer. (add_tracepoint): Default the tracepoint's type to trap tracepoint, and orig_size to -1. (get_trace_state_variable) [IN_PROCESS_AGENT]: Handle allocated internal variables. (create_trace_state_variable): New parameter `gdb'. Handle it. (clear_installed_tracepoints): Clear fast tracepoint jumps. (cmd_qtdp): Handle fast tracepoints. (cmd_qtdv): Adjust. (max_jump_pad_size): New. (gdb_jump_pad_head): New. (get_jump_space_head): New. (claim_jump_space): New. (sort_tracepoints): New. (MAX_JUMP_SIZE): New. (cmd_qtstart): Handle fast tracepoints. Sync tracepoints with the IPA. (stop_tracing) [IN_PROCESS_AGENT]: Don't include the tdisconnected support. Upload fast traceframes, and delete internal IPA breakpoints. (stop_tracing_handler): New. (flush_trace_buffer_handler): New. (cmd_qtstop): Upload fast tracepoints. (response_tracepoint): Handle fast tracepoints. (tracepoint_finished_step): Upload fast traceframes. Set the tracepoint hit context's tracepoint type. (handle_tracepoint_bkpts): New. (tracepoint_was_hit): Set the tracepoint hit context's tracepoint type. Add comment about fast tracepoints. (collect_data_at_tracepoint) [IN_PROCESS_AGENT]: Don't access the non-existing action_str field. (get_context_regcache): Handle fast tracepoints. (do_action_at_tracepoint) [!IN_PROCESS_AGENT]: Don't write the PC to the regcache. (fast_tracepoint_from_jump_pad_address): New. (fast_tracepoint_from_ipa_tpoint_address): New. (collecting_t): New. (force_unlock_trace_buffer): New. (fast_tracepoint_collecting): New. (collecting): New. (gdb_collect): New. (write_inferior_data_ptr): New. (target_tp_heap): New. (target_malloc): New. (download_agent_expr): New. (UALIGN): New. (download_tracepoints): New. (download_trace_state_variables): New. (upload_fast_traceframes): New. (IPA_FIRST_TRACEFRAME): New. (IPA_NEXT_TRACEFRAME_1): New. (IPA_NEXT_TRACEFRAME): New. [IN_PROCESS_AGENT]: Include sys/mman.h and fcntl.h. [IN_PROCESS_AGENT] (gdb_tp_heap_buffer, gdb_jump_pad_buffer) (gdb_jump_pad_buffer_end): New. [IN_PROCESS_AGENT] (initialize_tracepoint_ftlib): New. (initialize_tracepoint): Adjust. [IN_PROCESS_AGENT]: Allocate the IPA heap, and jump pad scratch buffer. Initialize the low module. * utils.c (PREFIX, TOOLNAME): New. (malloc_failure): Use PREFIX. (error): In the IPA, an error causes an exit. (fatal, warning): Use PREFIX. (internal_error): Use TOOLNAME. (NUMCELLS): Increase to 10. * configure, config.in: Regenerate. gdb/ 2010-06-01 Pedro Alves <pedro@codesourcery.com> * NEWS: Mention gdbserver fast tracepoints support. gdb/doc/ 2010-06-01 Pedro Alves <pedro@codesourcery.com> * gdb.texinfo (Set Tracepoints): Mention tracepoints support in gdbserver, and add cross reference. (Tracepoints support in gdbserver): New subsection.
2010-06-01 15:20:52 +02:00
struct fast_tracepoint_jump;
/* Locate a breakpoint placed at address WHERE and return a pointer
to its structure. */
struct breakpoint *find_gdb_breakpoint_at (CORE_ADDR where);
* linux-low.c (linux_wait_1): Avoid setting need_step_over is there's a GDB breakpoint at stop_pc. Always report a trap to GDB if we could tell there's a GDB breakpoint at stop_pc. (need_step_over_p): Don't do a step over if we find a GDB breakpoint at the resume PC. * mem-break.c (struct raw_breakpoint): New. (enum bkpt_type): New type `gdb_breakpoint'. (struct breakpoint): Delete the `PC', `old_data' and `inserted' fields. New field `raw'. (find_raw_breakpoint_at): New. (set_raw_breakpoint_at): Handle refcounting. Create a raw breakpoint instead. (set_breakpoint_at): Adjust. (delete_raw_breakpoint): New. (release_breakpoint): New. (delete_breakpoint): Rename to... (delete_breakpoint_1): ... this. Add proc parameter. Use release_breakpoint. Return ENOENT. (delete_breakpoint): Reimplement. (find_breakpoint_at): Delete. (find_gdb_breakpoint_at): New. (delete_breakpoint_at): Delete. (set_gdb_breakpoint_at): New. (delete_gdb_breakpoint_at): New. (gdb_breakpoint_here): New. (set_reinsert_breakpoint): Use release_breakpoint. (uninsert_breakpoint): Rename to ... (uninsert_raw_breakpoint): ... this. (uninsert_breakpoints_at): Adjust to handle raw breakpoints. (reinsert_raw_breakpoint): Change parameter type to raw_breakpoint. (reinsert_breakpoints_at): Adjust to handle raw breakpoints instead. (check_breakpoints): Adjust. Use release_breakpoint. (breakpoint_here): Rewrite using find_raw_breakpoint_at. (breakpoint_inserted_here): Ditto. (check_mem_read): Adjust to iterate over raw breakpoints instead. Don't trust the breakpoint's shadow if it is not inserted. (check_mem_write): Adjust to iterate over raw breakpoints instead. (delete_all_breakpoints): Adjust. (free_all_breakpoints): Mark all breakpoints as uninserted, and use delete_breakpoint_1. * mem-break.h (breakpoints_supported): Delete declaration. (set_gdb_breakpoint_at): Declare. (gdb_breakpoint_here): Declare. (delete_breakpoint_at): Delete. (delete_gdb_breakpoint_at): Declare. * server.h (struct raw_breakpoint): Forward declare. (struct process_info): New field `raw_breakpoints'. * linux-x86-low.c (x86_insert_point, x86_remote_point): Handle Z0 breakpoints.
2010-04-01 16:25:34 +02:00
/* Create a new GDB breakpoint at WHERE. Returns -1 if breakpoints
are not supported on this target, 0 otherwise. */
Teach linux gdbserver to step-over-breakpoints. * linux-low.c (can_hardware_single_step): New. (supports_breakpoints): New. (handle_extended_wait): If stopping threads, read the stop pc of the new cloned LWP. (get_pc): New. (get_stop_pc): Add `lwp' parameter. Handle it. Bail out if the low target doesn't support retrieving the PC. (add_lwp): Set last_resume_kind to resume_continue. (linux_attach_lwp_1): Adjust comments. Always set stop_expected. (linux_attach): Don't clear stop_expected. Set the lwp's last_resume_kind to resume_stop. (linux_detach_one_lwp): Don't check for removed breakpoints. (check_removed_breakpoint): Delete. (status_pending_p): Rename to ... (status_pending_p_callback): ... this. Don't check for removed breakpoints. Don't consider threads that are stopped from GDB's perspective. (linux_wait_for_lwp): Always read the stop_pc here. (cancel_breakpoint): New. (step_over_bkpt): New global. (linux_wait_for_event_1): Implement stepping over breakpoints. (gdb_wants_lwp_stopped): New. (gdb_wants_all_stopped): New. (linux_wait_1): Tag threads as gdb-wants-stopped. Cancel finished single-step traps here. Store the thread's last reported target wait status. (send_sigstop): Don't clear stop_expected. Always set it, instead. (mark_lwp_dead): Remove reference to pending_is_breakpoint. (cancel_finished_single_step): New. (cancel_finished_single_steps): New. (wait_for_sigstop): Don't cancel finished single-step traps here. (linux_resume_one_lwp): Don't check for removed breakpoints. Don't set `step' on non-hardware step archs. (linux_set_resume_request): Ignore resume_stop requests if already stopping or stopped. Set the lwp's last_resume_kind. (resume_status_pending_p): Don't check for removed breakpoints. (need_step_over_p): New. (start_step_over): New. (finish_step_over): New. (linux_resume_one_thread): Always queue a sigstop for resume_stop requests. Clear the thread's last reported target waitstatus. Don't use the `suspended' flag. Don't consider pending breakpoints. (linux_resume): Start a step-over if necessary. (proceed_one_lwp): New. (proceed_all_lwps): New. (unstop_all_lwps): New. * linux-low.h (struct lwp_info): Rewrite comment for the `suspended' flag. Add the `stop_pc' field. Delete the `pending_stop_pc' field. Tweak the `stepping' flag's comment. Add `'last_resume_kind' and `need_step_over' fields. * inferiors.c (struct thread_info): Delete, moved elsewhere. * mem-break.c (struct breakpoint): Delete `reinserting' flag. Delete `breakpoint_to_reinsert' field. New flag `inserted'. (set_raw_breakpoint_at): New. (set_breakpoint_at): Rewrite to use it. (reinsert_breakpoint_handler): Delete. (set_reinsert_breakpoint): New. (reinsert_breakpoint_by_bp): Delete. (delete_reinsert_breakpoints): New. (uninsert_breakpoint): Rewrite. (uninsert_breakpoints_at): New. (reinsert_breakpoint): Rewrite. (reinsert_breakpoints_at): New. (check_breakpoints): Rewrite. (breakpoint_here): New. (breakpoint_inserted_here): New. (check_mem_read): Adjust. * mem-break.h (breakpoints_supported, breakpoint_here) (breakpoint_inserted_here, set_reinsert_breakpoint): Declare. (reinsert_breakpoint_by_bp): Delete declaration. (delete_reinsert_breakpoints): Declare. (reinsert_breakpoint): Delete declaration. (reinsert_breakpoints_at): Declare. (uninsert_breakpoint): Delete declaration. (uninsert_breakpoints_at): Declare. (check_breakpoints): Adjust prototype. * server.h: Adjust include order. (struct thread_info): Declare here. Add a `last_status' field.
2010-03-24 01:05:03 +01:00
* linux-low.c (linux_wait_1): Avoid setting need_step_over is there's a GDB breakpoint at stop_pc. Always report a trap to GDB if we could tell there's a GDB breakpoint at stop_pc. (need_step_over_p): Don't do a step over if we find a GDB breakpoint at the resume PC. * mem-break.c (struct raw_breakpoint): New. (enum bkpt_type): New type `gdb_breakpoint'. (struct breakpoint): Delete the `PC', `old_data' and `inserted' fields. New field `raw'. (find_raw_breakpoint_at): New. (set_raw_breakpoint_at): Handle refcounting. Create a raw breakpoint instead. (set_breakpoint_at): Adjust. (delete_raw_breakpoint): New. (release_breakpoint): New. (delete_breakpoint): Rename to... (delete_breakpoint_1): ... this. Add proc parameter. Use release_breakpoint. Return ENOENT. (delete_breakpoint): Reimplement. (find_breakpoint_at): Delete. (find_gdb_breakpoint_at): New. (delete_breakpoint_at): Delete. (set_gdb_breakpoint_at): New. (delete_gdb_breakpoint_at): New. (gdb_breakpoint_here): New. (set_reinsert_breakpoint): Use release_breakpoint. (uninsert_breakpoint): Rename to ... (uninsert_raw_breakpoint): ... this. (uninsert_breakpoints_at): Adjust to handle raw breakpoints. (reinsert_raw_breakpoint): Change parameter type to raw_breakpoint. (reinsert_breakpoints_at): Adjust to handle raw breakpoints instead. (check_breakpoints): Adjust. Use release_breakpoint. (breakpoint_here): Rewrite using find_raw_breakpoint_at. (breakpoint_inserted_here): Ditto. (check_mem_read): Adjust to iterate over raw breakpoints instead. Don't trust the breakpoint's shadow if it is not inserted. (check_mem_write): Adjust to iterate over raw breakpoints instead. (delete_all_breakpoints): Adjust. (free_all_breakpoints): Mark all breakpoints as uninserted, and use delete_breakpoint_1. * mem-break.h (breakpoints_supported): Delete declaration. (set_gdb_breakpoint_at): Declare. (gdb_breakpoint_here): Declare. (delete_breakpoint_at): Delete. (delete_gdb_breakpoint_at): Declare. * server.h (struct raw_breakpoint): Forward declare. (struct process_info): New field `raw_breakpoints'. * linux-x86-low.c (x86_insert_point, x86_remote_point): Handle Z0 breakpoints.
2010-04-01 16:25:34 +02:00
int set_gdb_breakpoint_at (CORE_ADDR where);
Teach linux gdbserver to step-over-breakpoints. * linux-low.c (can_hardware_single_step): New. (supports_breakpoints): New. (handle_extended_wait): If stopping threads, read the stop pc of the new cloned LWP. (get_pc): New. (get_stop_pc): Add `lwp' parameter. Handle it. Bail out if the low target doesn't support retrieving the PC. (add_lwp): Set last_resume_kind to resume_continue. (linux_attach_lwp_1): Adjust comments. Always set stop_expected. (linux_attach): Don't clear stop_expected. Set the lwp's last_resume_kind to resume_stop. (linux_detach_one_lwp): Don't check for removed breakpoints. (check_removed_breakpoint): Delete. (status_pending_p): Rename to ... (status_pending_p_callback): ... this. Don't check for removed breakpoints. Don't consider threads that are stopped from GDB's perspective. (linux_wait_for_lwp): Always read the stop_pc here. (cancel_breakpoint): New. (step_over_bkpt): New global. (linux_wait_for_event_1): Implement stepping over breakpoints. (gdb_wants_lwp_stopped): New. (gdb_wants_all_stopped): New. (linux_wait_1): Tag threads as gdb-wants-stopped. Cancel finished single-step traps here. Store the thread's last reported target wait status. (send_sigstop): Don't clear stop_expected. Always set it, instead. (mark_lwp_dead): Remove reference to pending_is_breakpoint. (cancel_finished_single_step): New. (cancel_finished_single_steps): New. (wait_for_sigstop): Don't cancel finished single-step traps here. (linux_resume_one_lwp): Don't check for removed breakpoints. Don't set `step' on non-hardware step archs. (linux_set_resume_request): Ignore resume_stop requests if already stopping or stopped. Set the lwp's last_resume_kind. (resume_status_pending_p): Don't check for removed breakpoints. (need_step_over_p): New. (start_step_over): New. (finish_step_over): New. (linux_resume_one_thread): Always queue a sigstop for resume_stop requests. Clear the thread's last reported target waitstatus. Don't use the `suspended' flag. Don't consider pending breakpoints. (linux_resume): Start a step-over if necessary. (proceed_one_lwp): New. (proceed_all_lwps): New. (unstop_all_lwps): New. * linux-low.h (struct lwp_info): Rewrite comment for the `suspended' flag. Add the `stop_pc' field. Delete the `pending_stop_pc' field. Tweak the `stepping' flag's comment. Add `'last_resume_kind' and `need_step_over' fields. * inferiors.c (struct thread_info): Delete, moved elsewhere. * mem-break.c (struct breakpoint): Delete `reinserting' flag. Delete `breakpoint_to_reinsert' field. New flag `inserted'. (set_raw_breakpoint_at): New. (set_breakpoint_at): Rewrite to use it. (reinsert_breakpoint_handler): Delete. (set_reinsert_breakpoint): New. (reinsert_breakpoint_by_bp): Delete. (delete_reinsert_breakpoints): New. (uninsert_breakpoint): Rewrite. (uninsert_breakpoints_at): New. (reinsert_breakpoint): Rewrite. (reinsert_breakpoints_at): New. (check_breakpoints): Rewrite. (breakpoint_here): New. (breakpoint_inserted_here): New. (check_mem_read): Adjust. * mem-break.h (breakpoints_supported, breakpoint_here) (breakpoint_inserted_here, set_reinsert_breakpoint): Declare. (reinsert_breakpoint_by_bp): Delete declaration. (delete_reinsert_breakpoints): Declare. (reinsert_breakpoint): Delete declaration. (reinsert_breakpoints_at): Declare. (uninsert_breakpoint): Delete declaration. (uninsert_breakpoints_at): Declare. (check_breakpoints): Adjust prototype. * server.h: Adjust include order. (struct thread_info): Declare here. Add a `last_status' field.
2010-03-24 01:05:03 +01:00
/* Returns TRUE if there's any breakpoint at ADDR in our tables,
inserted, or not. */
int breakpoint_here (CORE_ADDR addr);
/* Returns TRUE if there's any inserted breakpoint set at ADDR. */
int breakpoint_inserted_here (CORE_ADDR addr);
/* Clear all breakpoint conditions associated with this address. */
void clear_gdb_breakpoint_conditions (CORE_ADDR addr);
/* Set target-side condition CONDITION to the breakpoint at ADDR. */
int add_breakpoint_condition (CORE_ADDR addr, char **condition);
Add target-side support for dynamic printf. * NEWS: Mention the additional style. * breakpoint.h (struct bp_target_info): New fields tcommands, persist. (struct bp_location): New field cmd_bytecode. * breakpoint.c: Include format.h. (disconnected_dprintf): New global. (parse_cmd_to_aexpr): New function. (build_target_command_list): New function. (insert_bp_location): Call it. (remove_breakpoints_pid): Skip dprintf breakpoints. (print_one_breakpoint_location): Ditto. (dprintf_style_agent): New global. (dprintf_style_enums): Add dprintf_style_agent. (update_dprintf_command_list): Add agent case. (agent_printf_command): New function. (_initialize_breakpoint): Add new commands. * common/ax.def (printf): New bytecode. * ax.h (ax_string): Declare. * ax-gdb.h (gen_printf): Declare. * ax-gdb.c: Include cli-utils.h, format.h. (gen_printf): New function. (maint_agent_print_command): New function. (_initialize_ax_gdb): Add maint agent-printf command. * ax-general.c (ax_string): New function. (ax_print): Add printf disassembly. * Makefile.in (SFILES): Add format.c (COMMON_OBS): Add format.o. * common/format.h: New file. * common/format.c: New file. * printcmd.c: Include format.h. (ui_printf): Call parse_format_string. * remote.c (remote_state): New field breakpoint_commands. (PACKET_BreakpointCommands): New enum. (remote_breakpoint_commands_feature): New function. (remote_protocol_features): Add new BreakpointCommands entry. (remote_can_run_breakpoint_commands): New function. (remote_add_target_side_commands): New function. (remote_insert_breakpoint): Call it. (remote_insert_hw_breakpoint): Ditto. (_initialize_remote): Add new packet configuration for target-side breakpoint commands. * target.h (struct target_ops): New field to_can_run_breakpoint_commands. (target_can_run_breakpoint_commands): New macro. * target.c (update_current_target): Handle to_can_run_breakpoint_commands. [gdbserver] * Makefile.in (WARN_CFLAGS_NO_FORMAT): Define. (ax.o): Add it to build rule. (ax-ipa.o): Ditto. (OBS): Add format.o. (IPA_OBS): Add format.o. * server.c (handle_query): Claim support for breakpoint commands. (process_point_options): Add command case. (process_serial_event): Leave running if there are printfs in effect. * mem-break.h (any_persistent_commands): Declare. (add_breakpoint_commands): Declare. (gdb_no_commands_at_breakpoint): Declare. (run_breakpoint_commands): Declare. * mem-break.c (struct point_command_list): New struct. (struct breakpoint): New field command_list. (any_persistent_commands): New function. (add_commands_to_breakpoint): New function. (add_breakpoint_commands): New function. (gdb_no_commands_at_breakpoint): New function. (run_breakpoint_commands): New function. * linux-low.c (linux_wait_1): Test for and run breakpoint commands locally. * ax.c: Include format.h. (ax_printf): New function. (gdb_eval_agent_expr): Add printf opcode. [doc] * gdb.texinfo (Dynamic Printf): Mention agent style and disconnected dprintf. (Maintenance Commands): Describe maint agent-printf. (General Query Packets): Mention BreakpointCommands feature. (Packets): Document commands extension to Z0 packet. * agentexpr.texi (Bytecode Descriptions): Document printf bytecode. [testsuite] * gdb.base/dprintf.exp: Add agent style tests.
2012-07-02 17:29:39 +02:00
int add_breakpoint_commands (CORE_ADDR addr, char **commands, int persist);
int any_persistent_commands (void);
/* Evaluation condition (if any) at breakpoint BP. Return 1 if
true and 0 otherwise. */
int gdb_condition_true_at_breakpoint (CORE_ADDR where);
Add target-side support for dynamic printf. * NEWS: Mention the additional style. * breakpoint.h (struct bp_target_info): New fields tcommands, persist. (struct bp_location): New field cmd_bytecode. * breakpoint.c: Include format.h. (disconnected_dprintf): New global. (parse_cmd_to_aexpr): New function. (build_target_command_list): New function. (insert_bp_location): Call it. (remove_breakpoints_pid): Skip dprintf breakpoints. (print_one_breakpoint_location): Ditto. (dprintf_style_agent): New global. (dprintf_style_enums): Add dprintf_style_agent. (update_dprintf_command_list): Add agent case. (agent_printf_command): New function. (_initialize_breakpoint): Add new commands. * common/ax.def (printf): New bytecode. * ax.h (ax_string): Declare. * ax-gdb.h (gen_printf): Declare. * ax-gdb.c: Include cli-utils.h, format.h. (gen_printf): New function. (maint_agent_print_command): New function. (_initialize_ax_gdb): Add maint agent-printf command. * ax-general.c (ax_string): New function. (ax_print): Add printf disassembly. * Makefile.in (SFILES): Add format.c (COMMON_OBS): Add format.o. * common/format.h: New file. * common/format.c: New file. * printcmd.c: Include format.h. (ui_printf): Call parse_format_string. * remote.c (remote_state): New field breakpoint_commands. (PACKET_BreakpointCommands): New enum. (remote_breakpoint_commands_feature): New function. (remote_protocol_features): Add new BreakpointCommands entry. (remote_can_run_breakpoint_commands): New function. (remote_add_target_side_commands): New function. (remote_insert_breakpoint): Call it. (remote_insert_hw_breakpoint): Ditto. (_initialize_remote): Add new packet configuration for target-side breakpoint commands. * target.h (struct target_ops): New field to_can_run_breakpoint_commands. (target_can_run_breakpoint_commands): New macro. * target.c (update_current_target): Handle to_can_run_breakpoint_commands. [gdbserver] * Makefile.in (WARN_CFLAGS_NO_FORMAT): Define. (ax.o): Add it to build rule. (ax-ipa.o): Ditto. (OBS): Add format.o. (IPA_OBS): Add format.o. * server.c (handle_query): Claim support for breakpoint commands. (process_point_options): Add command case. (process_serial_event): Leave running if there are printfs in effect. * mem-break.h (any_persistent_commands): Declare. (add_breakpoint_commands): Declare. (gdb_no_commands_at_breakpoint): Declare. (run_breakpoint_commands): Declare. * mem-break.c (struct point_command_list): New struct. (struct breakpoint): New field command_list. (any_persistent_commands): New function. (add_commands_to_breakpoint): New function. (add_breakpoint_commands): New function. (gdb_no_commands_at_breakpoint): New function. (run_breakpoint_commands): New function. * linux-low.c (linux_wait_1): Test for and run breakpoint commands locally. * ax.c: Include format.h. (ax_printf): New function. (gdb_eval_agent_expr): Add printf opcode. [doc] * gdb.texinfo (Dynamic Printf): Mention agent style and disconnected dprintf. (Maintenance Commands): Describe maint agent-printf. (General Query Packets): Mention BreakpointCommands feature. (Packets): Document commands extension to Z0 packet. * agentexpr.texi (Bytecode Descriptions): Document printf bytecode. [testsuite] * gdb.base/dprintf.exp: Add agent style tests.
2012-07-02 17:29:39 +02:00
int gdb_no_commands_at_breakpoint (CORE_ADDR where);
void run_breakpoint_commands (CORE_ADDR where);
* linux-low.c (linux_wait_1): Avoid setting need_step_over is there's a GDB breakpoint at stop_pc. Always report a trap to GDB if we could tell there's a GDB breakpoint at stop_pc. (need_step_over_p): Don't do a step over if we find a GDB breakpoint at the resume PC. * mem-break.c (struct raw_breakpoint): New. (enum bkpt_type): New type `gdb_breakpoint'. (struct breakpoint): Delete the `PC', `old_data' and `inserted' fields. New field `raw'. (find_raw_breakpoint_at): New. (set_raw_breakpoint_at): Handle refcounting. Create a raw breakpoint instead. (set_breakpoint_at): Adjust. (delete_raw_breakpoint): New. (release_breakpoint): New. (delete_breakpoint): Rename to... (delete_breakpoint_1): ... this. Add proc parameter. Use release_breakpoint. Return ENOENT. (delete_breakpoint): Reimplement. (find_breakpoint_at): Delete. (find_gdb_breakpoint_at): New. (delete_breakpoint_at): Delete. (set_gdb_breakpoint_at): New. (delete_gdb_breakpoint_at): New. (gdb_breakpoint_here): New. (set_reinsert_breakpoint): Use release_breakpoint. (uninsert_breakpoint): Rename to ... (uninsert_raw_breakpoint): ... this. (uninsert_breakpoints_at): Adjust to handle raw breakpoints. (reinsert_raw_breakpoint): Change parameter type to raw_breakpoint. (reinsert_breakpoints_at): Adjust to handle raw breakpoints instead. (check_breakpoints): Adjust. Use release_breakpoint. (breakpoint_here): Rewrite using find_raw_breakpoint_at. (breakpoint_inserted_here): Ditto. (check_mem_read): Adjust to iterate over raw breakpoints instead. Don't trust the breakpoint's shadow if it is not inserted. (check_mem_write): Adjust to iterate over raw breakpoints instead. (delete_all_breakpoints): Adjust. (free_all_breakpoints): Mark all breakpoints as uninserted, and use delete_breakpoint_1. * mem-break.h (breakpoints_supported): Delete declaration. (set_gdb_breakpoint_at): Declare. (gdb_breakpoint_here): Declare. (delete_breakpoint_at): Delete. (delete_gdb_breakpoint_at): Declare. * server.h (struct raw_breakpoint): Forward declare. (struct process_info): New field `raw_breakpoints'. * linux-x86-low.c (x86_insert_point, x86_remote_point): Handle Z0 breakpoints.
2010-04-01 16:25:34 +02:00
/* Returns TRUE if there's a GDB breakpoint set at ADDR. */
int gdb_breakpoint_here (CORE_ADDR where);
/* Create a new breakpoint at WHERE, and call HANDLER when
it is hit. HANDLER should return 1 if the breakpoint
should be deleted, 0 otherwise. */
struct breakpoint *set_breakpoint_at (CORE_ADDR where,
int (*handler) (CORE_ADDR));
* linux-low.c (linux_wait_1): Avoid setting need_step_over is there's a GDB breakpoint at stop_pc. Always report a trap to GDB if we could tell there's a GDB breakpoint at stop_pc. (need_step_over_p): Don't do a step over if we find a GDB breakpoint at the resume PC. * mem-break.c (struct raw_breakpoint): New. (enum bkpt_type): New type `gdb_breakpoint'. (struct breakpoint): Delete the `PC', `old_data' and `inserted' fields. New field `raw'. (find_raw_breakpoint_at): New. (set_raw_breakpoint_at): Handle refcounting. Create a raw breakpoint instead. (set_breakpoint_at): Adjust. (delete_raw_breakpoint): New. (release_breakpoint): New. (delete_breakpoint): Rename to... (delete_breakpoint_1): ... this. Add proc parameter. Use release_breakpoint. Return ENOENT. (delete_breakpoint): Reimplement. (find_breakpoint_at): Delete. (find_gdb_breakpoint_at): New. (delete_breakpoint_at): Delete. (set_gdb_breakpoint_at): New. (delete_gdb_breakpoint_at): New. (gdb_breakpoint_here): New. (set_reinsert_breakpoint): Use release_breakpoint. (uninsert_breakpoint): Rename to ... (uninsert_raw_breakpoint): ... this. (uninsert_breakpoints_at): Adjust to handle raw breakpoints. (reinsert_raw_breakpoint): Change parameter type to raw_breakpoint. (reinsert_breakpoints_at): Adjust to handle raw breakpoints instead. (check_breakpoints): Adjust. Use release_breakpoint. (breakpoint_here): Rewrite using find_raw_breakpoint_at. (breakpoint_inserted_here): Ditto. (check_mem_read): Adjust to iterate over raw breakpoints instead. Don't trust the breakpoint's shadow if it is not inserted. (check_mem_write): Adjust to iterate over raw breakpoints instead. (delete_all_breakpoints): Adjust. (free_all_breakpoints): Mark all breakpoints as uninserted, and use delete_breakpoint_1. * mem-break.h (breakpoints_supported): Delete declaration. (set_gdb_breakpoint_at): Declare. (gdb_breakpoint_here): Declare. (delete_breakpoint_at): Delete. (delete_gdb_breakpoint_at): Declare. * server.h (struct raw_breakpoint): Forward declare. (struct process_info): New field `raw_breakpoints'. * linux-x86-low.c (x86_insert_point, x86_remote_point): Handle Z0 breakpoints.
2010-04-01 16:25:34 +02:00
/* Delete a GDB breakpoint previously inserted at ADDR with
set_gdb_breakpoint_at. */
gdb/ * arm-wince-tdep.c: New. * config/arm/wince.mt (DEPRECATED_TM_FILE): Use tm-arm.h. (MT_CFLAGS): Delete. (TM_CLIBS): Delete. (TDEPFILES): Add arm-wince-tdep.o, corelow.o, solib.o, solib-legacy.o, solib-svr4.o, and remove wince.o. * configure.tgt (arm*-*-mingw32ce*): Add. * signals/signals.c [HAVE_SIGNAL_H]: Check. (do_target_signal_to_host): Silence 'not used' warning. * config/arm/tm-wince.h: Remove. gdb/gdbserver/ * gdbserver/configure.ac: Add errno checking. (AC_CHECK_HEADERS): Add errno.h, fcntl.h, signal.h, sys/file.h and malloc.h. (AC_CHECK_DECLS): Add perror. (srv_mingwce): Handle. * gdbserver/configure.srv (i[34567]86-*-cygwin*): Add win32-i386-low.o to srv_tgtobj. (i[34567]86-*-mingw*): Likewise. (arm*-*-mingw32ce*): Add case. * gdbreplay.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_ERRNO_H, HAVE_MALLOC_H]: Check. [__MINGW32CE__] (strerror): New function. [__MINGW32CE__] (errno): Define to GetLastError. [__MINGW32CE__] (COUNTOF): New macro. (remote_open): Remove extra close call. * mem-break.c (delete_breakpoint_at): New function. * mem-break.h (delete_breakpoint_at): Declare. * remote-utils.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_UNISTD_H, HAVE_ERRNO_H]: Check. [USE_WIN32API] (read, write): Add char* casts. * server.c [HAVE_UNISTD_H, HAVE_SIGNAL_H]: Check. * server.h: Include wincecompat.h on Windows CE. [HAVE_ERRNO_H]: Check. (perror): Declare if not declared. * utils.c: Add stdlib.h, errno.h and malloc.h includes. (perror_with_name): Remove errno declaration. * wincecompat.h: New. * wincecompat.c: New. * win32-low.h: New. * win32-arm-low.c: New. * win32-i386-low.c: New. (win32-low.c): Include mem-break.h and win32-low.h, and winnt.h. (OUTMSG2): Make it safe. (_T): New macro. (COUNTOF): New macro. (NUM_REGS): Get it from the low target. (CONTEXT_EXTENDED_REGISTERS, CONTEXT_FLOATING_POINT, CONTEXT_DEBUG_REGISTERS): Add fallbacks to 0. (thread_rec): Let low target handle debug registers. (child_add_thread): Likewise. (child_init_thread_list): Likewise. (continue_one_thread): Likewise. (regptr): New. (do_child_fetch_inferior_registers): Move to ... * win32-i386-low.c: ... here, and rename to ... (do_fetch_inferior_registers): ... this. * win32-low.c (child_fetch_inferior_registers): Go through the low target. (do_child_store_inferior_registers): Use regptr. (strwinerror): New function. (win32_create_inferior): Handle Windows CE. Use strwinerror instead of strerror on Windows error codes. Add program to the error output. Don't close the main thread handle on Windows CE. (win32_attach): Use coredll.dll on Windows CE. (win32_kill): Close current process and current thread handles. (win32_detach): Use coredll.dll on Windows CE. (win32_resume): Let low target handle debug registers, and step request. (handle_exception): Add/Remove initial breakpoint. Avoid non-existant WSTOPSIG on Windows CE. (win32_read_inferior_memory): Cast to remove warning. (win32_arch_string): Go through the low target. (initialize_low): Call set_breakpoint_data with the low target's breakpoint. * win32-low.c (dr, FLAG_TRACE_BIT, FCS_REGNUM, FOP_REGNUM, mappings): Move to ... * win32-i386-low.c: ... here. * win32-low.c (win32_thread_info): Move to ... * win32-low.h: ... here. * Makefile.in (SFILES): Add win32-low.c, win32-i386-low.c, win32-arm-low.c and wincecompat.c. (all:): Add $EXEEXT. (install-only:): Likewise. (gdbserver:): Likewise. (gdbreplay:): Likewise. * config.in: Regenerate. * configure: Regenerate.
2007-03-29 03:06:48 +02:00
* linux-low.c (linux_wait_1): Avoid setting need_step_over is there's a GDB breakpoint at stop_pc. Always report a trap to GDB if we could tell there's a GDB breakpoint at stop_pc. (need_step_over_p): Don't do a step over if we find a GDB breakpoint at the resume PC. * mem-break.c (struct raw_breakpoint): New. (enum bkpt_type): New type `gdb_breakpoint'. (struct breakpoint): Delete the `PC', `old_data' and `inserted' fields. New field `raw'. (find_raw_breakpoint_at): New. (set_raw_breakpoint_at): Handle refcounting. Create a raw breakpoint instead. (set_breakpoint_at): Adjust. (delete_raw_breakpoint): New. (release_breakpoint): New. (delete_breakpoint): Rename to... (delete_breakpoint_1): ... this. Add proc parameter. Use release_breakpoint. Return ENOENT. (delete_breakpoint): Reimplement. (find_breakpoint_at): Delete. (find_gdb_breakpoint_at): New. (delete_breakpoint_at): Delete. (set_gdb_breakpoint_at): New. (delete_gdb_breakpoint_at): New. (gdb_breakpoint_here): New. (set_reinsert_breakpoint): Use release_breakpoint. (uninsert_breakpoint): Rename to ... (uninsert_raw_breakpoint): ... this. (uninsert_breakpoints_at): Adjust to handle raw breakpoints. (reinsert_raw_breakpoint): Change parameter type to raw_breakpoint. (reinsert_breakpoints_at): Adjust to handle raw breakpoints instead. (check_breakpoints): Adjust. Use release_breakpoint. (breakpoint_here): Rewrite using find_raw_breakpoint_at. (breakpoint_inserted_here): Ditto. (check_mem_read): Adjust to iterate over raw breakpoints instead. Don't trust the breakpoint's shadow if it is not inserted. (check_mem_write): Adjust to iterate over raw breakpoints instead. (delete_all_breakpoints): Adjust. (free_all_breakpoints): Mark all breakpoints as uninserted, and use delete_breakpoint_1. * mem-break.h (breakpoints_supported): Delete declaration. (set_gdb_breakpoint_at): Declare. (gdb_breakpoint_here): Declare. (delete_breakpoint_at): Delete. (delete_gdb_breakpoint_at): Declare. * server.h (struct raw_breakpoint): Forward declare. (struct process_info): New field `raw_breakpoints'. * linux-x86-low.c (x86_insert_point, x86_remote_point): Handle Z0 breakpoints.
2010-04-01 16:25:34 +02:00
int delete_gdb_breakpoint_at (CORE_ADDR addr);
gdb/ * arm-wince-tdep.c: New. * config/arm/wince.mt (DEPRECATED_TM_FILE): Use tm-arm.h. (MT_CFLAGS): Delete. (TM_CLIBS): Delete. (TDEPFILES): Add arm-wince-tdep.o, corelow.o, solib.o, solib-legacy.o, solib-svr4.o, and remove wince.o. * configure.tgt (arm*-*-mingw32ce*): Add. * signals/signals.c [HAVE_SIGNAL_H]: Check. (do_target_signal_to_host): Silence 'not used' warning. * config/arm/tm-wince.h: Remove. gdb/gdbserver/ * gdbserver/configure.ac: Add errno checking. (AC_CHECK_HEADERS): Add errno.h, fcntl.h, signal.h, sys/file.h and malloc.h. (AC_CHECK_DECLS): Add perror. (srv_mingwce): Handle. * gdbserver/configure.srv (i[34567]86-*-cygwin*): Add win32-i386-low.o to srv_tgtobj. (i[34567]86-*-mingw*): Likewise. (arm*-*-mingw32ce*): Add case. * gdbreplay.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_ERRNO_H, HAVE_MALLOC_H]: Check. [__MINGW32CE__] (strerror): New function. [__MINGW32CE__] (errno): Define to GetLastError. [__MINGW32CE__] (COUNTOF): New macro. (remote_open): Remove extra close call. * mem-break.c (delete_breakpoint_at): New function. * mem-break.h (delete_breakpoint_at): Declare. * remote-utils.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H, HAVE_FCNTL_H, HAVE_UNISTD_H, HAVE_ERRNO_H]: Check. [USE_WIN32API] (read, write): Add char* casts. * server.c [HAVE_UNISTD_H, HAVE_SIGNAL_H]: Check. * server.h: Include wincecompat.h on Windows CE. [HAVE_ERRNO_H]: Check. (perror): Declare if not declared. * utils.c: Add stdlib.h, errno.h and malloc.h includes. (perror_with_name): Remove errno declaration. * wincecompat.h: New. * wincecompat.c: New. * win32-low.h: New. * win32-arm-low.c: New. * win32-i386-low.c: New. (win32-low.c): Include mem-break.h and win32-low.h, and winnt.h. (OUTMSG2): Make it safe. (_T): New macro. (COUNTOF): New macro. (NUM_REGS): Get it from the low target. (CONTEXT_EXTENDED_REGISTERS, CONTEXT_FLOATING_POINT, CONTEXT_DEBUG_REGISTERS): Add fallbacks to 0. (thread_rec): Let low target handle debug registers. (child_add_thread): Likewise. (child_init_thread_list): Likewise. (continue_one_thread): Likewise. (regptr): New. (do_child_fetch_inferior_registers): Move to ... * win32-i386-low.c: ... here, and rename to ... (do_fetch_inferior_registers): ... this. * win32-low.c (child_fetch_inferior_registers): Go through the low target. (do_child_store_inferior_registers): Use regptr. (strwinerror): New function. (win32_create_inferior): Handle Windows CE. Use strwinerror instead of strerror on Windows error codes. Add program to the error output. Don't close the main thread handle on Windows CE. (win32_attach): Use coredll.dll on Windows CE. (win32_kill): Close current process and current thread handles. (win32_detach): Use coredll.dll on Windows CE. (win32_resume): Let low target handle debug registers, and step request. (handle_exception): Add/Remove initial breakpoint. Avoid non-existant WSTOPSIG on Windows CE. (win32_read_inferior_memory): Cast to remove warning. (win32_arch_string): Go through the low target. (initialize_low): Call set_breakpoint_data with the low target's breakpoint. * win32-low.c (dr, FLAG_TRACE_BIT, FCS_REGNUM, FOP_REGNUM, mappings): Move to ... * win32-i386-low.c: ... here. * win32-low.c (win32_thread_info): Move to ... * win32-low.h: ... here. * Makefile.in (SFILES): Add win32-low.c, win32-i386-low.c, win32-arm-low.c and wincecompat.c. (all:): Add $EXEEXT. (install-only:): Likewise. (gdbserver:): Likewise. (gdbreplay:): Likewise. * config.in: Regenerate. * configure: Regenerate.
2007-03-29 03:06:48 +02:00
gdb/gdbserver/ * server.h (LONGEST): New. (struct thread_info) <while_stepping>: New field. (unpack_varlen_hex, xrealloc, pulongest, plongest, phex_nz): Declare. (initialize_tracepoint, handle_tracepoint_general_set) (handle_tracepoint_query, tracepoint_finished_step) (tracepoint_was_hit, release_while_stepping_state_list): (current_traceframe): Declare. * server.c (handle_general_set): Handle tracepoint packets. (read_memory): New. (write_memory): New. (handle_search_memory_1): Use read_memory. (handle_query): Report support for conditional tracepoints, trace state variables, and tracepoint sources. Handle tracepoint queries. (main): Initialize the tracepoints module. (process_serial_event): Handle traceframe reads/writes. * linux-low.c (handle_tracepoints): New. (linux_wait_1): Call it. (linux_resume_one_lwp): Handle while-stepping. (linux_supports_tracepoints, linux_read_pc, linux_write_pc): New. (linux_target_ops): Install them. * linux-low.h (struct linux_target_ops) <supports_tracepoints>: New field. * linux-x86-low.c (x86_supports_tracepoints): New. (the_low_target). Install it. * mem-break.h (delete_breakpoint): Declare. * mem-break.c (delete_breakpoint): Make external. * target.h (struct target_ops): Add `supports_tracepoints', `read_pc', and `write_pc' fields. (target_supports_tracepoints): Define. * utils.c (xrealloc, decimal2str, pulongest, plongest, thirty_two) (phex_nz): New. * regcache.h (struct regcache) <registers_owned>: New field. (init_register_cache, regcache_cpy): Declare. (regcache_read_pc, regcache_write_pc): Declare. (register_cache_size): Declare. (supply_regblock): Declare. * regcache.c (init_register_cache): New. (new_register_cache): Use it. (regcache_cpy): New. (register_cache_size): New. (supply_regblock): New. (regcache_read_pc, regcache_write_pc): New. * tracepoint.c: New. * Makefile.in (OBS): Add tracepoint.o. (tracepoint.o): New rule. gdb/ * regformats/regdat.sh: Include server.h. Don't include regcache.h.
2010-04-09 05:40:00 +02:00
/* Delete a breakpoint. */
int delete_breakpoint (struct breakpoint *bkpt);
Teach linux gdbserver to step-over-breakpoints. * linux-low.c (can_hardware_single_step): New. (supports_breakpoints): New. (handle_extended_wait): If stopping threads, read the stop pc of the new cloned LWP. (get_pc): New. (get_stop_pc): Add `lwp' parameter. Handle it. Bail out if the low target doesn't support retrieving the PC. (add_lwp): Set last_resume_kind to resume_continue. (linux_attach_lwp_1): Adjust comments. Always set stop_expected. (linux_attach): Don't clear stop_expected. Set the lwp's last_resume_kind to resume_stop. (linux_detach_one_lwp): Don't check for removed breakpoints. (check_removed_breakpoint): Delete. (status_pending_p): Rename to ... (status_pending_p_callback): ... this. Don't check for removed breakpoints. Don't consider threads that are stopped from GDB's perspective. (linux_wait_for_lwp): Always read the stop_pc here. (cancel_breakpoint): New. (step_over_bkpt): New global. (linux_wait_for_event_1): Implement stepping over breakpoints. (gdb_wants_lwp_stopped): New. (gdb_wants_all_stopped): New. (linux_wait_1): Tag threads as gdb-wants-stopped. Cancel finished single-step traps here. Store the thread's last reported target wait status. (send_sigstop): Don't clear stop_expected. Always set it, instead. (mark_lwp_dead): Remove reference to pending_is_breakpoint. (cancel_finished_single_step): New. (cancel_finished_single_steps): New. (wait_for_sigstop): Don't cancel finished single-step traps here. (linux_resume_one_lwp): Don't check for removed breakpoints. Don't set `step' on non-hardware step archs. (linux_set_resume_request): Ignore resume_stop requests if already stopping or stopped. Set the lwp's last_resume_kind. (resume_status_pending_p): Don't check for removed breakpoints. (need_step_over_p): New. (start_step_over): New. (finish_step_over): New. (linux_resume_one_thread): Always queue a sigstop for resume_stop requests. Clear the thread's last reported target waitstatus. Don't use the `suspended' flag. Don't consider pending breakpoints. (linux_resume): Start a step-over if necessary. (proceed_one_lwp): New. (proceed_all_lwps): New. (unstop_all_lwps): New. * linux-low.h (struct lwp_info): Rewrite comment for the `suspended' flag. Add the `stop_pc' field. Delete the `pending_stop_pc' field. Tweak the `stepping' flag's comment. Add `'last_resume_kind' and `need_step_over' fields. * inferiors.c (struct thread_info): Delete, moved elsewhere. * mem-break.c (struct breakpoint): Delete `reinserting' flag. Delete `breakpoint_to_reinsert' field. New flag `inserted'. (set_raw_breakpoint_at): New. (set_breakpoint_at): Rewrite to use it. (reinsert_breakpoint_handler): Delete. (set_reinsert_breakpoint): New. (reinsert_breakpoint_by_bp): Delete. (delete_reinsert_breakpoints): New. (uninsert_breakpoint): Rewrite. (uninsert_breakpoints_at): New. (reinsert_breakpoint): Rewrite. (reinsert_breakpoints_at): New. (check_breakpoints): Rewrite. (breakpoint_here): New. (breakpoint_inserted_here): New. (check_mem_read): Adjust. * mem-break.h (breakpoints_supported, breakpoint_here) (breakpoint_inserted_here, set_reinsert_breakpoint): Declare. (reinsert_breakpoint_by_bp): Delete declaration. (delete_reinsert_breakpoints): Declare. (reinsert_breakpoint): Delete declaration. (reinsert_breakpoints_at): Declare. (uninsert_breakpoint): Delete declaration. (uninsert_breakpoints_at): Declare. (check_breakpoints): Adjust prototype. * server.h: Adjust include order. (struct thread_info): Declare here. Add a `last_status' field.
2010-03-24 01:05:03 +01:00
/* Set a reinsert breakpoint at STOP_AT. */
void set_reinsert_breakpoint (CORE_ADDR stop_at);
/* Delete all reinsert breakpoints. */
Teach linux gdbserver to step-over-breakpoints. * linux-low.c (can_hardware_single_step): New. (supports_breakpoints): New. (handle_extended_wait): If stopping threads, read the stop pc of the new cloned LWP. (get_pc): New. (get_stop_pc): Add `lwp' parameter. Handle it. Bail out if the low target doesn't support retrieving the PC. (add_lwp): Set last_resume_kind to resume_continue. (linux_attach_lwp_1): Adjust comments. Always set stop_expected. (linux_attach): Don't clear stop_expected. Set the lwp's last_resume_kind to resume_stop. (linux_detach_one_lwp): Don't check for removed breakpoints. (check_removed_breakpoint): Delete. (status_pending_p): Rename to ... (status_pending_p_callback): ... this. Don't check for removed breakpoints. Don't consider threads that are stopped from GDB's perspective. (linux_wait_for_lwp): Always read the stop_pc here. (cancel_breakpoint): New. (step_over_bkpt): New global. (linux_wait_for_event_1): Implement stepping over breakpoints. (gdb_wants_lwp_stopped): New. (gdb_wants_all_stopped): New. (linux_wait_1): Tag threads as gdb-wants-stopped. Cancel finished single-step traps here. Store the thread's last reported target wait status. (send_sigstop): Don't clear stop_expected. Always set it, instead. (mark_lwp_dead): Remove reference to pending_is_breakpoint. (cancel_finished_single_step): New. (cancel_finished_single_steps): New. (wait_for_sigstop): Don't cancel finished single-step traps here. (linux_resume_one_lwp): Don't check for removed breakpoints. Don't set `step' on non-hardware step archs. (linux_set_resume_request): Ignore resume_stop requests if already stopping or stopped. Set the lwp's last_resume_kind. (resume_status_pending_p): Don't check for removed breakpoints. (need_step_over_p): New. (start_step_over): New. (finish_step_over): New. (linux_resume_one_thread): Always queue a sigstop for resume_stop requests. Clear the thread's last reported target waitstatus. Don't use the `suspended' flag. Don't consider pending breakpoints. (linux_resume): Start a step-over if necessary. (proceed_one_lwp): New. (proceed_all_lwps): New. (unstop_all_lwps): New. * linux-low.h (struct lwp_info): Rewrite comment for the `suspended' flag. Add the `stop_pc' field. Delete the `pending_stop_pc' field. Tweak the `stepping' flag's comment. Add `'last_resume_kind' and `need_step_over' fields. * inferiors.c (struct thread_info): Delete, moved elsewhere. * mem-break.c (struct breakpoint): Delete `reinserting' flag. Delete `breakpoint_to_reinsert' field. New flag `inserted'. (set_raw_breakpoint_at): New. (set_breakpoint_at): Rewrite to use it. (reinsert_breakpoint_handler): Delete. (set_reinsert_breakpoint): New. (reinsert_breakpoint_by_bp): Delete. (delete_reinsert_breakpoints): New. (uninsert_breakpoint): Rewrite. (uninsert_breakpoints_at): New. (reinsert_breakpoint): Rewrite. (reinsert_breakpoints_at): New. (check_breakpoints): Rewrite. (breakpoint_here): New. (breakpoint_inserted_here): New. (check_mem_read): Adjust. * mem-break.h (breakpoints_supported, breakpoint_here) (breakpoint_inserted_here, set_reinsert_breakpoint): Declare. (reinsert_breakpoint_by_bp): Delete declaration. (delete_reinsert_breakpoints): Declare. (reinsert_breakpoint): Delete declaration. (reinsert_breakpoints_at): Declare. (uninsert_breakpoint): Delete declaration. (uninsert_breakpoints_at): Declare. (check_breakpoints): Adjust prototype. * server.h: Adjust include order. (struct thread_info): Declare here. Add a `last_status' field.
2010-03-24 01:05:03 +01:00
void delete_reinsert_breakpoints (void);
Teach linux gdbserver to step-over-breakpoints. * linux-low.c (can_hardware_single_step): New. (supports_breakpoints): New. (handle_extended_wait): If stopping threads, read the stop pc of the new cloned LWP. (get_pc): New. (get_stop_pc): Add `lwp' parameter. Handle it. Bail out if the low target doesn't support retrieving the PC. (add_lwp): Set last_resume_kind to resume_continue. (linux_attach_lwp_1): Adjust comments. Always set stop_expected. (linux_attach): Don't clear stop_expected. Set the lwp's last_resume_kind to resume_stop. (linux_detach_one_lwp): Don't check for removed breakpoints. (check_removed_breakpoint): Delete. (status_pending_p): Rename to ... (status_pending_p_callback): ... this. Don't check for removed breakpoints. Don't consider threads that are stopped from GDB's perspective. (linux_wait_for_lwp): Always read the stop_pc here. (cancel_breakpoint): New. (step_over_bkpt): New global. (linux_wait_for_event_1): Implement stepping over breakpoints. (gdb_wants_lwp_stopped): New. (gdb_wants_all_stopped): New. (linux_wait_1): Tag threads as gdb-wants-stopped. Cancel finished single-step traps here. Store the thread's last reported target wait status. (send_sigstop): Don't clear stop_expected. Always set it, instead. (mark_lwp_dead): Remove reference to pending_is_breakpoint. (cancel_finished_single_step): New. (cancel_finished_single_steps): New. (wait_for_sigstop): Don't cancel finished single-step traps here. (linux_resume_one_lwp): Don't check for removed breakpoints. Don't set `step' on non-hardware step archs. (linux_set_resume_request): Ignore resume_stop requests if already stopping or stopped. Set the lwp's last_resume_kind. (resume_status_pending_p): Don't check for removed breakpoints. (need_step_over_p): New. (start_step_over): New. (finish_step_over): New. (linux_resume_one_thread): Always queue a sigstop for resume_stop requests. Clear the thread's last reported target waitstatus. Don't use the `suspended' flag. Don't consider pending breakpoints. (linux_resume): Start a step-over if necessary. (proceed_one_lwp): New. (proceed_all_lwps): New. (unstop_all_lwps): New. * linux-low.h (struct lwp_info): Rewrite comment for the `suspended' flag. Add the `stop_pc' field. Delete the `pending_stop_pc' field. Tweak the `stepping' flag's comment. Add `'last_resume_kind' and `need_step_over' fields. * inferiors.c (struct thread_info): Delete, moved elsewhere. * mem-break.c (struct breakpoint): Delete `reinserting' flag. Delete `breakpoint_to_reinsert' field. New flag `inserted'. (set_raw_breakpoint_at): New. (set_breakpoint_at): Rewrite to use it. (reinsert_breakpoint_handler): Delete. (set_reinsert_breakpoint): New. (reinsert_breakpoint_by_bp): Delete. (delete_reinsert_breakpoints): New. (uninsert_breakpoint): Rewrite. (uninsert_breakpoints_at): New. (reinsert_breakpoint): Rewrite. (reinsert_breakpoints_at): New. (check_breakpoints): Rewrite. (breakpoint_here): New. (breakpoint_inserted_here): New. (check_mem_read): Adjust. * mem-break.h (breakpoints_supported, breakpoint_here) (breakpoint_inserted_here, set_reinsert_breakpoint): Declare. (reinsert_breakpoint_by_bp): Delete declaration. (delete_reinsert_breakpoints): Declare. (reinsert_breakpoint): Delete declaration. (reinsert_breakpoints_at): Declare. (uninsert_breakpoint): Delete declaration. (uninsert_breakpoints_at): Declare. (check_breakpoints): Adjust prototype. * server.h: Adjust include order. (struct thread_info): Declare here. Add a `last_status' field.
2010-03-24 01:05:03 +01:00
/* Reinsert breakpoints at WHERE (and change their status to
inserted). */
Teach linux gdbserver to step-over-breakpoints. * linux-low.c (can_hardware_single_step): New. (supports_breakpoints): New. (handle_extended_wait): If stopping threads, read the stop pc of the new cloned LWP. (get_pc): New. (get_stop_pc): Add `lwp' parameter. Handle it. Bail out if the low target doesn't support retrieving the PC. (add_lwp): Set last_resume_kind to resume_continue. (linux_attach_lwp_1): Adjust comments. Always set stop_expected. (linux_attach): Don't clear stop_expected. Set the lwp's last_resume_kind to resume_stop. (linux_detach_one_lwp): Don't check for removed breakpoints. (check_removed_breakpoint): Delete. (status_pending_p): Rename to ... (status_pending_p_callback): ... this. Don't check for removed breakpoints. Don't consider threads that are stopped from GDB's perspective. (linux_wait_for_lwp): Always read the stop_pc here. (cancel_breakpoint): New. (step_over_bkpt): New global. (linux_wait_for_event_1): Implement stepping over breakpoints. (gdb_wants_lwp_stopped): New. (gdb_wants_all_stopped): New. (linux_wait_1): Tag threads as gdb-wants-stopped. Cancel finished single-step traps here. Store the thread's last reported target wait status. (send_sigstop): Don't clear stop_expected. Always set it, instead. (mark_lwp_dead): Remove reference to pending_is_breakpoint. (cancel_finished_single_step): New. (cancel_finished_single_steps): New. (wait_for_sigstop): Don't cancel finished single-step traps here. (linux_resume_one_lwp): Don't check for removed breakpoints. Don't set `step' on non-hardware step archs. (linux_set_resume_request): Ignore resume_stop requests if already stopping or stopped. Set the lwp's last_resume_kind. (resume_status_pending_p): Don't check for removed breakpoints. (need_step_over_p): New. (start_step_over): New. (finish_step_over): New. (linux_resume_one_thread): Always queue a sigstop for resume_stop requests. Clear the thread's last reported target waitstatus. Don't use the `suspended' flag. Don't consider pending breakpoints. (linux_resume): Start a step-over if necessary. (proceed_one_lwp): New. (proceed_all_lwps): New. (unstop_all_lwps): New. * linux-low.h (struct lwp_info): Rewrite comment for the `suspended' flag. Add the `stop_pc' field. Delete the `pending_stop_pc' field. Tweak the `stepping' flag's comment. Add `'last_resume_kind' and `need_step_over' fields. * inferiors.c (struct thread_info): Delete, moved elsewhere. * mem-break.c (struct breakpoint): Delete `reinserting' flag. Delete `breakpoint_to_reinsert' field. New flag `inserted'. (set_raw_breakpoint_at): New. (set_breakpoint_at): Rewrite to use it. (reinsert_breakpoint_handler): Delete. (set_reinsert_breakpoint): New. (reinsert_breakpoint_by_bp): Delete. (delete_reinsert_breakpoints): New. (uninsert_breakpoint): Rewrite. (uninsert_breakpoints_at): New. (reinsert_breakpoint): Rewrite. (reinsert_breakpoints_at): New. (check_breakpoints): Rewrite. (breakpoint_here): New. (breakpoint_inserted_here): New. (check_mem_read): Adjust. * mem-break.h (breakpoints_supported, breakpoint_here) (breakpoint_inserted_here, set_reinsert_breakpoint): Declare. (reinsert_breakpoint_by_bp): Delete declaration. (delete_reinsert_breakpoints): Declare. (reinsert_breakpoint): Delete declaration. (reinsert_breakpoints_at): Declare. (uninsert_breakpoint): Delete declaration. (uninsert_breakpoints_at): Declare. (check_breakpoints): Adjust prototype. * server.h: Adjust include order. (struct thread_info): Declare here. Add a `last_status' field.
2010-03-24 01:05:03 +01:00
void reinsert_breakpoints_at (CORE_ADDR where);
Teach linux gdbserver to step-over-breakpoints. * linux-low.c (can_hardware_single_step): New. (supports_breakpoints): New. (handle_extended_wait): If stopping threads, read the stop pc of the new cloned LWP. (get_pc): New. (get_stop_pc): Add `lwp' parameter. Handle it. Bail out if the low target doesn't support retrieving the PC. (add_lwp): Set last_resume_kind to resume_continue. (linux_attach_lwp_1): Adjust comments. Always set stop_expected. (linux_attach): Don't clear stop_expected. Set the lwp's last_resume_kind to resume_stop. (linux_detach_one_lwp): Don't check for removed breakpoints. (check_removed_breakpoint): Delete. (status_pending_p): Rename to ... (status_pending_p_callback): ... this. Don't check for removed breakpoints. Don't consider threads that are stopped from GDB's perspective. (linux_wait_for_lwp): Always read the stop_pc here. (cancel_breakpoint): New. (step_over_bkpt): New global. (linux_wait_for_event_1): Implement stepping over breakpoints. (gdb_wants_lwp_stopped): New. (gdb_wants_all_stopped): New. (linux_wait_1): Tag threads as gdb-wants-stopped. Cancel finished single-step traps here. Store the thread's last reported target wait status. (send_sigstop): Don't clear stop_expected. Always set it, instead. (mark_lwp_dead): Remove reference to pending_is_breakpoint. (cancel_finished_single_step): New. (cancel_finished_single_steps): New. (wait_for_sigstop): Don't cancel finished single-step traps here. (linux_resume_one_lwp): Don't check for removed breakpoints. Don't set `step' on non-hardware step archs. (linux_set_resume_request): Ignore resume_stop requests if already stopping or stopped. Set the lwp's last_resume_kind. (resume_status_pending_p): Don't check for removed breakpoints. (need_step_over_p): New. (start_step_over): New. (finish_step_over): New. (linux_resume_one_thread): Always queue a sigstop for resume_stop requests. Clear the thread's last reported target waitstatus. Don't use the `suspended' flag. Don't consider pending breakpoints. (linux_resume): Start a step-over if necessary. (proceed_one_lwp): New. (proceed_all_lwps): New. (unstop_all_lwps): New. * linux-low.h (struct lwp_info): Rewrite comment for the `suspended' flag. Add the `stop_pc' field. Delete the `pending_stop_pc' field. Tweak the `stepping' flag's comment. Add `'last_resume_kind' and `need_step_over' fields. * inferiors.c (struct thread_info): Delete, moved elsewhere. * mem-break.c (struct breakpoint): Delete `reinserting' flag. Delete `breakpoint_to_reinsert' field. New flag `inserted'. (set_raw_breakpoint_at): New. (set_breakpoint_at): Rewrite to use it. (reinsert_breakpoint_handler): Delete. (set_reinsert_breakpoint): New. (reinsert_breakpoint_by_bp): Delete. (delete_reinsert_breakpoints): New. (uninsert_breakpoint): Rewrite. (uninsert_breakpoints_at): New. (reinsert_breakpoint): Rewrite. (reinsert_breakpoints_at): New. (check_breakpoints): Rewrite. (breakpoint_here): New. (breakpoint_inserted_here): New. (check_mem_read): Adjust. * mem-break.h (breakpoints_supported, breakpoint_here) (breakpoint_inserted_here, set_reinsert_breakpoint): Declare. (reinsert_breakpoint_by_bp): Delete declaration. (delete_reinsert_breakpoints): Declare. (reinsert_breakpoint): Delete declaration. (reinsert_breakpoints_at): Declare. (uninsert_breakpoint): Delete declaration. (uninsert_breakpoints_at): Declare. (check_breakpoints): Adjust prototype. * server.h: Adjust include order. (struct thread_info): Declare here. Add a `last_status' field.
2010-03-24 01:05:03 +01:00
/* Uninsert breakpoints at WHERE (and change their status to
uninserted). This still leaves the breakpoints in the table. */
Teach linux gdbserver to step-over-breakpoints. * linux-low.c (can_hardware_single_step): New. (supports_breakpoints): New. (handle_extended_wait): If stopping threads, read the stop pc of the new cloned LWP. (get_pc): New. (get_stop_pc): Add `lwp' parameter. Handle it. Bail out if the low target doesn't support retrieving the PC. (add_lwp): Set last_resume_kind to resume_continue. (linux_attach_lwp_1): Adjust comments. Always set stop_expected. (linux_attach): Don't clear stop_expected. Set the lwp's last_resume_kind to resume_stop. (linux_detach_one_lwp): Don't check for removed breakpoints. (check_removed_breakpoint): Delete. (status_pending_p): Rename to ... (status_pending_p_callback): ... this. Don't check for removed breakpoints. Don't consider threads that are stopped from GDB's perspective. (linux_wait_for_lwp): Always read the stop_pc here. (cancel_breakpoint): New. (step_over_bkpt): New global. (linux_wait_for_event_1): Implement stepping over breakpoints. (gdb_wants_lwp_stopped): New. (gdb_wants_all_stopped): New. (linux_wait_1): Tag threads as gdb-wants-stopped. Cancel finished single-step traps here. Store the thread's last reported target wait status. (send_sigstop): Don't clear stop_expected. Always set it, instead. (mark_lwp_dead): Remove reference to pending_is_breakpoint. (cancel_finished_single_step): New. (cancel_finished_single_steps): New. (wait_for_sigstop): Don't cancel finished single-step traps here. (linux_resume_one_lwp): Don't check for removed breakpoints. Don't set `step' on non-hardware step archs. (linux_set_resume_request): Ignore resume_stop requests if already stopping or stopped. Set the lwp's last_resume_kind. (resume_status_pending_p): Don't check for removed breakpoints. (need_step_over_p): New. (start_step_over): New. (finish_step_over): New. (linux_resume_one_thread): Always queue a sigstop for resume_stop requests. Clear the thread's last reported target waitstatus. Don't use the `suspended' flag. Don't consider pending breakpoints. (linux_resume): Start a step-over if necessary. (proceed_one_lwp): New. (proceed_all_lwps): New. (unstop_all_lwps): New. * linux-low.h (struct lwp_info): Rewrite comment for the `suspended' flag. Add the `stop_pc' field. Delete the `pending_stop_pc' field. Tweak the `stepping' flag's comment. Add `'last_resume_kind' and `need_step_over' fields. * inferiors.c (struct thread_info): Delete, moved elsewhere. * mem-break.c (struct breakpoint): Delete `reinserting' flag. Delete `breakpoint_to_reinsert' field. New flag `inserted'. (set_raw_breakpoint_at): New. (set_breakpoint_at): Rewrite to use it. (reinsert_breakpoint_handler): Delete. (set_reinsert_breakpoint): New. (reinsert_breakpoint_by_bp): Delete. (delete_reinsert_breakpoints): New. (uninsert_breakpoint): Rewrite. (uninsert_breakpoints_at): New. (reinsert_breakpoint): Rewrite. (reinsert_breakpoints_at): New. (check_breakpoints): Rewrite. (breakpoint_here): New. (breakpoint_inserted_here): New. (check_mem_read): Adjust. * mem-break.h (breakpoints_supported, breakpoint_here) (breakpoint_inserted_here, set_reinsert_breakpoint): Declare. (reinsert_breakpoint_by_bp): Delete declaration. (delete_reinsert_breakpoints): Declare. (reinsert_breakpoint): Delete declaration. (reinsert_breakpoints_at): Declare. (uninsert_breakpoint): Delete declaration. (uninsert_breakpoints_at): Declare. (check_breakpoints): Adjust prototype. * server.h: Adjust include order. (struct thread_info): Declare here. Add a `last_status' field.
2010-03-24 01:05:03 +01:00
void uninsert_breakpoints_at (CORE_ADDR where);
Static tracepoints support, and UST integration. gdb/gdbserver/ * configure.ac: Handle --with-ust. substitute ustlibs and ustinc. * mem-break.c (uninsert_all_breakpoints) (reinsert_all_breakpoints): New. * mem-break.h (reinsert_all_breakpoints, uninsert_all_breakpoints): * tracepoint.c (ust_loaded, helper_thread_id, cmd_buf): New. (gdb_agent_ust_loaded, helper_thread_id) (gdb_agent_helper_thread_id): New macros. (struct ipa_sym_addresses): Add addr_ust_loaded, addr_helper_thread_id, addr_cmd_buf. (symbol_list): Add ust_loaded, helper_thread_id, cmd_buf. (in_process_agent_loaded_ust): New. (write_e_ust_not_loaded): New. (maybe_write_ipa_ust_not_loaded): New. (struct collect_static_trace_data_action): New. (enum tracepoint_type) <static_tracepoint>: New. (struct tracepoint) <handle>: Mention static tracepoints. (struct static_tracepoint_ctx): New. (CMD_BUF_SIZE): New. (add_tracepoint_action): Handle static tracepoint actions. (unprobe_marker_at): New. (clear_installed_tracepoints): Handle static tracepoints. (cmd_qtdp): Handle static tracepoints. (probe_marker_at): New. (cmd_qtstart): Handle static tracepoints. (response_tracepoint): Handle static tracepoints. (cmd_qtfstm, cmd_qtsstm, cmd_qtstmat): New. (handle_tracepoint_query): Handle qTfSTM, qTsSTM and qTSTMat. (get_context_regcache): Handle static tracepoints. (do_action_at_tracepoint): Handle static tracepoint actions. (traceframe_find_block_type): Handle static trace data blocks. (traceframe_read_sdata): New. (download_tracepoints): Download static tracepoint actions. [HAVE_UST] Include ust/ust.h, dlfcn.h, sys/socket.h, and sys/un.h. (GDB_PROBE_NAME): New. (ust_ops): New. (GET_UST_SYM): New. (USTF): New. (dlsym_ust): New. (ust_marker_to_static_tracepoint): New. (gdb_probe): New. (collect_ust_data_at_tracepoint): New. (gdb_ust_probe): New. (UNIX_PATH_MAX, SOCK_DIR): New. (gdb_ust_connect_sync_socket): New. (resume_thread, stop_thread): New. (run_inferior_command): New. (init_named_socket): New. (gdb_ust_socket_init): New. (cstr_to_hexstr): New. (next_st): New. (first_marker, next_marker): New. (response_ust_marker): New. (cmd_qtfstm, cmd_qtsstm): New. (unprobe_marker_at, probe_marker_at): New. (cmd_qtstmat, gdb_ust_thread): New. (gdb_ust_init): New. (initialize_tracepoint_ftlib): Call gdb_ust_init. * linux-amd64-ipa.c [HAVE_UST]: Include ust/processor.h (ST_REGENTRY): New. (x86_64_st_collect_regmap): New. (X86_64_NUM_ST_COLLECT_GREGS): New. (AMD64_RIP_REGNUM): New. (supply_static_tracepoint_registers): New. * linux-i386-ipa.c [HAVE_UST]: Include ust/processor.h (ST_REGENTRY): New. (i386_st_collect_regmap): New. (i386_NUM_ST_COLLECT_GREGS): New. (supply_static_tracepoint_registers): New. * server.c (handle_query): Handle qXfer:statictrace:read. <qSupported>: Report support for StaticTracepoints, and qXfer:statictrace:read features. * server.h (traceframe_read_sdata) (supply_static_tracepoint_registers): Declare. * remote-utils.c (convert_int_to_ascii, hexchars, ishex, tohex) (unpack_varlen_hex): Include in IPA build. * Makefile.in (ustlibs, ustinc): New. (IPA_OBJS): Add remote-utils-ipa.o. ($(IPA_LIB)): Link -ldl and -lpthread. (UST_CFLAGS): New. (IPAGENT_CFLAGS): Add UST_CFLAGS. * config.in, configure: Regenerate. gdb/ * NEWS: Mention new support for static tracepoints. (New packets): Mention qTfSTM, qTsSTM, qTSTMat and qXfer:statictrace:read. (New features in the GDB remote stub, GDBserver): Mention static tracepoints support using an UST based backend. (New commands): Mention "info static-tracepoint-markers" and "strace". * breakpoint.c (is_marker_spec): New. (is_tracepoint): Handle static tracepoints. (validate_commands_for_breakpoint): Static tracepoints can't do while-stepping. (static_tracepoints_here): New. (bpstat_what): Handle static tracepoints. (print_one_breakpoint_location, allocate_bp_location, mention): Ditto. (create_breakpoint_sal): Ditto. (decode_static_tracepoint_spec): New. (create_breakpoint): Replace `hardwareflag', and `traceflag' with `type_wanted'. Adjust. Handle static tracepoint marker locations. (break_command_1): Adjust. (update_static_tracepoint): New. (update_breakpoint_locations): Handle static tracepoints. (breakpoint_re_set_one): Handle static tracepoint marker locations. (disable_command, enable_command): Handle static tracepoints. (trace_command, ftrace_command): Adjust. (strace_command): New. (create_tracepoint_from_upload): Adjust. (save_breakpoints): Handle static tracepoints. (_initialize_breakpoint): Install the "strace" command. * breakpoint.h (enum bptype): New bp_static_tracepoint type. (struct breakpoint): New fields static_trace_marker_id and static_trace_marker_id_idx. (breakpoints_here_p): Declare. (create_breakpoint): Adjust. (static_tracepoints_here): Declare. * remote.c (struct remote_state) <static_tracepoints>: New field. (PACKET_qXfer_statictrace_read, PACKET_StaticTracepoints): New. (remote_static_tracepoint_marker_at): New. (remote_static_tracepoint_markers_by_strid): New. (remote_static_tracepoint_feature): New. (remote_disconnected_tracing_feature): Handle "StaticTracepoints". (remote_xfer_partial): Handle TARGET_OBJECT_STATIC_TRACE_DATA. (remote_supports_static_tracepoints): New. (remote_download_tracepoint): Download static tracepoints. (init_remote_ops): Install remote_static_tracepoint_marker_at and remote_static_tracepoint_markers_by_strid. (_initialize_remote): Install set|show remote static-tracepoints, and set|show remote read-sdata-object commands. * target.c (update_current_target): Inherit and default to_static_tracepoint_marker_at, and to_static_tracepoint_markers_by_strid. * target.h (static_tracepoint_marker): Forward declare. (enum target_object): New object TARGET_OBJECT_STATIC_TRACE_DATA. (static_tracepoint_marker_p): New typedef. (DEF_VEC_P(static_tracepoint_marker_p)): New VEC type. (struct target_ops): New fields to_static_tracepoint_marker_at and to_static_tracepoint_markers_by_strid. (target_static_tracepoint_marker_at) (target_static_tracepoint_markers_by_strid): New. * tracepoint.c: Include source.h. (validate_actionline): Handle $_sdata. (struct collection_list): New field strace_data. (add_static_trace_data): New. (clear_collection_list): Clear strace_data. (stringify_collection_list): Account for a possible static trace data collection. (encode_actions_1): Encode an $_sdata collection. (parse_tracepoint_definition): Handle static tracepoints. (parse_static_tracepoint_marker_definition): New. (release_static_tracepoint_marker): New. (print_one_static_tracepoint_marker): New. (info_static_tracepoint_markers_command): New. (sdata_make_value): New. (_initialize_tracepoint): Create the $_sdata convenience variable. Add the "info static-tracepoint-markers" command. Mention $_sdata in the "collect" command's help output. * tracepoint.h (struct static_tracepoint_marker): New. (parse_static_tracepoint_marker_definition) (release_static_tracepoint_marker): Declare. * mi/mi-cmd-break.c (mi_cmd_break_insert): Adjust. * python/py-breakpoint.c (bppy_new): Adjust. doc/ * gdb.texinfo (Convenience Variables): Document $_sdata. (Commands to Set Tracepoints): Describe static tracepoints. Add `Listing Static Tracepoint Markers' menu entry. Document "strace". (Tracepoint Action Lists): Document collecting $_sdata. (Listing Static Tracepoint Markers): New subsection. (Tracepoints support in gdbserver): Mention static tracepoints. (remote packets, enabling and disabling): Mention read-sdata-object. (General Query Packets) <qSupported>: Document qXfer:sdata:read and StaticTracepoint. Mention qTfSTM, qTsSTM and qTSTMat as tracepoint packets. Document qXfer:sdata:read. (Tracepoint packets): Document qTfSTM, qTsSTM and qTSTMat.
2010-07-01 12:36:12 +02:00
/* Reinsert all breakpoints of the current process (and change their
status to inserted). */
void reinsert_all_breakpoints (void);
/* Uninsert all breakpoints of the current process (and change their
status to uninserted). This still leaves the breakpoints in the
table. */
void uninsert_all_breakpoints (void);
/* See if any breakpoint claims ownership of STOP_PC. Call the handler for
the breakpoint, if found. */
Teach linux gdbserver to step-over-breakpoints. * linux-low.c (can_hardware_single_step): New. (supports_breakpoints): New. (handle_extended_wait): If stopping threads, read the stop pc of the new cloned LWP. (get_pc): New. (get_stop_pc): Add `lwp' parameter. Handle it. Bail out if the low target doesn't support retrieving the PC. (add_lwp): Set last_resume_kind to resume_continue. (linux_attach_lwp_1): Adjust comments. Always set stop_expected. (linux_attach): Don't clear stop_expected. Set the lwp's last_resume_kind to resume_stop. (linux_detach_one_lwp): Don't check for removed breakpoints. (check_removed_breakpoint): Delete. (status_pending_p): Rename to ... (status_pending_p_callback): ... this. Don't check for removed breakpoints. Don't consider threads that are stopped from GDB's perspective. (linux_wait_for_lwp): Always read the stop_pc here. (cancel_breakpoint): New. (step_over_bkpt): New global. (linux_wait_for_event_1): Implement stepping over breakpoints. (gdb_wants_lwp_stopped): New. (gdb_wants_all_stopped): New. (linux_wait_1): Tag threads as gdb-wants-stopped. Cancel finished single-step traps here. Store the thread's last reported target wait status. (send_sigstop): Don't clear stop_expected. Always set it, instead. (mark_lwp_dead): Remove reference to pending_is_breakpoint. (cancel_finished_single_step): New. (cancel_finished_single_steps): New. (wait_for_sigstop): Don't cancel finished single-step traps here. (linux_resume_one_lwp): Don't check for removed breakpoints. Don't set `step' on non-hardware step archs. (linux_set_resume_request): Ignore resume_stop requests if already stopping or stopped. Set the lwp's last_resume_kind. (resume_status_pending_p): Don't check for removed breakpoints. (need_step_over_p): New. (start_step_over): New. (finish_step_over): New. (linux_resume_one_thread): Always queue a sigstop for resume_stop requests. Clear the thread's last reported target waitstatus. Don't use the `suspended' flag. Don't consider pending breakpoints. (linux_resume): Start a step-over if necessary. (proceed_one_lwp): New. (proceed_all_lwps): New. (unstop_all_lwps): New. * linux-low.h (struct lwp_info): Rewrite comment for the `suspended' flag. Add the `stop_pc' field. Delete the `pending_stop_pc' field. Tweak the `stepping' flag's comment. Add `'last_resume_kind' and `need_step_over' fields. * inferiors.c (struct thread_info): Delete, moved elsewhere. * mem-break.c (struct breakpoint): Delete `reinserting' flag. Delete `breakpoint_to_reinsert' field. New flag `inserted'. (set_raw_breakpoint_at): New. (set_breakpoint_at): Rewrite to use it. (reinsert_breakpoint_handler): Delete. (set_reinsert_breakpoint): New. (reinsert_breakpoint_by_bp): Delete. (delete_reinsert_breakpoints): New. (uninsert_breakpoint): Rewrite. (uninsert_breakpoints_at): New. (reinsert_breakpoint): Rewrite. (reinsert_breakpoints_at): New. (check_breakpoints): Rewrite. (breakpoint_here): New. (breakpoint_inserted_here): New. (check_mem_read): Adjust. * mem-break.h (breakpoints_supported, breakpoint_here) (breakpoint_inserted_here, set_reinsert_breakpoint): Declare. (reinsert_breakpoint_by_bp): Delete declaration. (delete_reinsert_breakpoints): Declare. (reinsert_breakpoint): Delete declaration. (reinsert_breakpoints_at): Declare. (uninsert_breakpoint): Delete declaration. (uninsert_breakpoints_at): Declare. (check_breakpoints): Adjust prototype. * server.h: Adjust include order. (struct thread_info): Declare here. Add a `last_status' field.
2010-03-24 01:05:03 +01:00
void check_breakpoints (CORE_ADDR stop_pc);
/* See if any breakpoints shadow the target memory area from MEM_ADDR
to MEM_ADDR + MEM_LEN. Update the data already read from the target
(in BUF) if necessary. */
* acconfig.h: Remove. * configure.ac: Add a test for socklen_t. Use three-argument AC_DEFINE throughout. * config.in: Regenerated using autoheader 2.59. * configure: Regenerated. * gdbreplay.c (socklen_t): Provide a default. (remote_open): Use socklen_t. * remote-utils.c (socklen_t): Provide a default. (remote_open): Use socklen_t. (convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use unsigned char. * i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned char for buffers. * linux-low.c (linux_read_memory, linux_write_memory) (linux_read_auxv): Likewise. * mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read) (check_mem_write): Likewise. * mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write): Likewise. * regcache.c (struct inferior_rgcache_data, registers_to_string) (registers_from_string, register_data): Likewise. * server.c (handle_query, main): Likewise. * server.h (convert_ascii_to_int, convert_int_to_ascii) (decode_M_packet): Likewise. * target.c (read_inferior_memory, write_inferior_memory): Likewise. * target.h (struct target_ops): Update read_memory, write_memory, and read_auxv. (read_inferior_memory, write_inferior_memory): Update. * linux-low.h (struct linux_target_ops): Change type of breakpoint to unsigned char *. * linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c, linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c, linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c, linux-s390-low.c, linux-sh-low.c: Update for changes in read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
void check_mem_read (CORE_ADDR mem_addr, unsigned char *buf, int mem_len);
/* See if any breakpoints shadow the target memory area from MEM_ADDR
to MEM_ADDR + MEM_LEN. Update the data to be written to the target
(in BUF, a copy of MYADDR on entry) if necessary, as well as the
original data for any breakpoints. */
void check_mem_write (CORE_ADDR mem_addr,
unsigned char *buf, const unsigned char *myaddr, int mem_len);
/* Set the byte pattern to insert for memory breakpoints. This function
must be called before any breakpoints are set. */
* acconfig.h: Remove. * configure.ac: Add a test for socklen_t. Use three-argument AC_DEFINE throughout. * config.in: Regenerated using autoheader 2.59. * configure: Regenerated. * gdbreplay.c (socklen_t): Provide a default. (remote_open): Use socklen_t. * remote-utils.c (socklen_t): Provide a default. (remote_open): Use socklen_t. (convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use unsigned char. * i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned char for buffers. * linux-low.c (linux_read_memory, linux_write_memory) (linux_read_auxv): Likewise. * mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read) (check_mem_write): Likewise. * mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write): Likewise. * regcache.c (struct inferior_rgcache_data, registers_to_string) (registers_from_string, register_data): Likewise. * server.c (handle_query, main): Likewise. * server.h (convert_ascii_to_int, convert_int_to_ascii) (decode_M_packet): Likewise. * target.c (read_inferior_memory, write_inferior_memory): Likewise. * target.h (struct target_ops): Update read_memory, write_memory, and read_auxv. (read_inferior_memory, write_inferior_memory): Update. * linux-low.h (struct linux_target_ops): Change type of breakpoint to unsigned char *. * linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c, linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c, linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c, linux-s390-low.c, linux-sh-low.c: Update for changes in read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
void set_breakpoint_data (const unsigned char *bp_data, int bp_len);
/* Delete all breakpoints. */
void delete_all_breakpoints (void);
/* Clear the "inserted" flag in all breakpoints of PROC. */
void mark_breakpoints_out (struct process_info *proc);
2009-04-01 Pedro Alves <pedro@codesourcery.com> Implement the multiprocess extensions, and add linux multiprocess support. * server.h (ULONGEST): Declare. (struct ptid, ptid_t): New. (minus_one_ptid, null_ptid): Declare. (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp) (ptid_get_tid, ptid_equal, ptid_is_pid): Declare. (struct inferior_list_entry): Change `id' type from unsigned from to ptid_t. (struct sym_cache, struct breakpoint, struct process_info_private): Forward declare. (struct process_info): Declare. (current_process): Declare. (all_processes): Declare. (initialize_inferiors): Declare. (add_thread): Adjust to use ptid_t. (thread_id_to_gdb_id, thread_to_gdb_id, gdb_id_to_thread_id): Ditto. (add_process, remove_process, find_thread_pid): Declare. (find_inferior_id): Adjust to use ptid_t. (cont_thread, general_thread, step_thread): Change type to ptid_t. (multi_process): Declare. (push_event): Adjust to use ptid_t. (read_ptid, write_ptid): Declare. (prepare_resume_reply): Adjust to use ptid_t. (clear_symbol_cache): Declare. * inferiors.c (all_processes): New. (null_ptid, minus_one_ptid): New. (ptid_build, pid_to_ptid, ptid_get_pid, ptid_get_lwp) (ptid_get_tid, ptid_equal, ptid_is_pid): New. (add_thread): Change unsigned long to ptid. Remove gdb_id parameter. Adjust. (thread_id_to_gdb_id, thread_to_gdb_id): Change unsigned long to ptid. (gdb_id_to_thread): Rename to ... (find_thread_pid): ... this. Change unsigned long to ptid. (gdb_id_to_thread_id, find_inferior_id): Change unsigned long to ptid. (loaded_dll, pull_pid_from_list): Adjust. (add_process, remove_process, find_process_pid) (get_thread_process, current_process, initialize_inferiors): New. * target.h (struct thread_resume) <thread>: Change type to ptid_t. (struct target_waitstatus) <related_pid>: Ditto. (struct target_ops) <kill, detach>: Add `pid' argument. Change return type to int. (struct target_ops) <join>: Add `pid' argument. (struct target_ops) <thread_alive>: Change pid's type to ptid_t. (struct target_ops) <wait>: Add `ptid' field. Change return type to ptid. (kill_inferior, detach_inferior, join_inferior): Add `pid' argument. (mywait): Add `ptid' argument. Change return type to ptid_t. (target_pid_to_str): Declare. * target.c (set_desired_inferior): Adjust to use ptids. (mywait): Add new `ptid' argument. Adjust. (target_pid_to_str): New. * mem-break.h (free_all_breakpoints): Declare. * mem-break.c (breakpoints): Delelete. (set_breakpoint_at, delete_breakpoint, find_breakpoint_at) (check_mem_read, check_mem_write, delete_all_breakpoints): Adjust to use per-process breakpoint list. (free_all_breakpoints): New. * remote-utils.c (struct sym_cache) <name>: Drop `const'. (symbol_cache, all_symbols_looked_up): Delete. (hexchars): New. (ishex, unpack_varlen_hex, write_ptid, hex_or_minus_one, read_ptid): New. (prepare_resume_reply): Change ptid argument's type from unsigned long to ptid_t. Adjust. Implement W;process and X;process. (free_sym_cache, clear_symbol_cache): New. (look_up_one_symbol): Adjust to per-process symbol cache. * * server.c (cont_thread, general_thread, step_thread): Change type to ptid_t. (attached): Delete. (multi_process): New. (last_ptid): Change type to ptid_t. (struct vstop_notif) <ptid>: Change type to ptid_t. (queue_stop_reply, push_event): Change `ptid' argument's type to ptid_t. (discard_queued_stop_replies): Add `pid' argument. (start_inferior): Adjust to use ptids. Adjust to mywait interface changes. Don't reference the `attached' global. (attach_inferior): Adjust to mywait interface changes. (handle_query): Adjust to use ptids. Parse GDB's qSupported features. Handle and report "multiprocess+". Handle "qAttached:PID". (handle_v_cont): Adjust to use ptids. Adjust to mywait interface changes. (handle_v_kill): New. (handle_v_stopped): Adjust to use target_pid_to_str. (handle_v_requests): Allow multiple attaches and runs when multiprocess extensions are in effect. Handle "vKill". (myresume): Adjust to use ptids. (queue_stop_reply_callback): Add `arg' parameter. Handle it. (handle_status): Adjust to discard_queued_stop_replies interface change. (first_thread_of, kill_inferior_callback) (detach_or_kill_inferior_callback, join_inferiors_callback): New. (main): Call initialize_inferiors. Adjust to use ptids, killing and detaching from all inferiors. Handle multiprocess packet variants. * linux-low.h: Include gdb_proc_service.h. (struct process_info_private): New. (struct linux_target_ops) <pid_of>: Use ptid_get_pid. <lwpid_of>: Use ptid_get_lwp. (get_lwp_thread): Adjust. (struct lwp_info): Add `dead' member. (find_lwp_pid): Declare. * linux-low.c (thread_db_active): Delete. (new_inferior): Adjust comment. (inferior_pid): Delete. (linux_add_process): New. (handle_extended_wait): Adjust. (add_lwp): Change unsigned long to ptid. (linux_create_inferior): Add process to processes table. Adjust to use ptids. Don't set new_inferior here. (linux_attach_lwp): Rename to ... (linux_attach_lwp_1): ... this. Add `initial' argument. Handle it. Adjust to use ptids. (linux_attach_lwp): New. (linux_attach): Add process to processes table. Don't set new_inferior here. (struct counter): New. (second_thread_of_pid_p, last_thread_of_process_p): New. (linux_kill_one_lwp): Add `args' parameter. Handle it. Adjust to multiple processes. (linux_kill): Add `pid' argument. Handle it. Adjust to multiple processes. Remove process from process table. (linux_detach_one_lwp): Add `args' parameter. Handle it. Adjust to multiple processes. (any_thread_of): New. (linux_detach): Add `pid' argument, and handle it. Remove process from processes table. (linux_join): Add `pid' argument. Handle it. (linux_thread_alive): Change unsighed long argument to ptid_t. Consider dead lwps as not being alive. (status_pending_p): Rename `dummy' argument to `arg'. Filter out threads we're not interested in. (same_lwp, find_lwp_pid): New. (linux_wait_for_lwp): Change `pid' argument's type from int to ptid_t. Adjust. (linux_wait_for_event): Rename to ... (linux_wait_for_event_1): ... this. Change `pid' argument's type from int to ptid_t. Adjust. (linux_wait_for_event): New. (linux_wait_1): Add `ptid' argument. Change return type to ptid_t. Adjust. Use last_thread_of_process_p. Remove processes that exit from the process table. (linux_wait): Add `ptid' argument. Change return type to ptid_t. Adjust. (mark_lwp_dead): New. (wait_for_sigstop): Adjust to use ptids. If a process exits while stopping all threads, mark its main lwp as dead. (linux_set_resume_request, linux_resume_one_thread): Adjust to use ptids. (fetch_register, usr_store_inferior_registers) (regsets_fetch_inferior_registers) (regsets_store_inferior_registers, linux_read_memory) (linux_write_memory): Inline `inferior_pid'. (linux_look_up_symbols): Adjust to use per-process `thread_db_active'. (linux_request_interrupt): Adjust to use ptids. (linux_read_auxv): Inline `inferior_pid'. (initialize_low): Don't reference thread_db_active. * gdb_proc_service.h (struct ps_prochandle) <pid>: Remove. * proc-service.c (ps_lgetregs): Use find_lwp_pid. (ps_getpid): Return the pid of the current inferior. * thread-db.c (proc_handle, thread_agent): Delete. (thread_db_create_event, thread_db_enable_reporting): Adjust to per-process data. (find_one_thread): Change argument type to ptid_t. Adjust to per-process data. (maybe_attach_thread): Adjust to per-process data and ptids. (thread_db_find_new_threads): Ditto. (thread_db_init): Ditto. * spu-low.c (spu_create_inferior, spu_attach): Add process to processes table. Adjust to use ptids. (spu_kill, spu_detach): Adjust interface. Remove process from processes table. (spu_join, spu_thread_alive): Adjust interface. (spu_wait): Adjust interface. Remove process from processes table. Adjust to use ptids. * win32-low.c (current_inferior_tid): Delete. (current_inferior_ptid): New. (debug_event_ptid): New. (thread_rec): Take a ptid. Adjust. (child_add_thread): Add `pid' argument. Adjust to use ptids. (child_delete_thread): Ditto. (do_initial_child_stuff): Add `attached' argument. Add process to processes table. (child_fetch_inferior_registers, child_store_inferior_registers): Adjust. (win32_create_inferior): Pass 0 to do_initial_child_stuff. (win32_attach): Pass 1 to do_initial_child_stuff. (win32_kill): Adjust interface. Remove process from processes table. (win32_detach): Ditto. (win32_join): Adjust interface. (win32_thread_alive): Take a ptid. (win32_resume): Adjust to use ptids. (get_child_debug_event): Ditto. (win32_wait): Adjust interface. Remove exiting process from processes table.
2009-04-02 00:50:24 +02:00
/* Delete all breakpoints, but do not try to un-insert them from the
inferior. */
void free_all_breakpoints (struct process_info *proc);
/* Check if breakpoints still seem to be inserted in the inferior. */
void validate_breakpoints (void);
gdb/gdbserver/ 2010-06-01 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> * Makefile.in (IPA_DEPFILES, extra_libraries): New. (all): Depend on $(extra_libraries). (install-only): Install the IPA. (IPA_OBJS, IPA_LIB): New. (clean): Remove the IPA lib. (IPAGENT_CFLAGS): New. (tracepoint-ipa.o, utils-ipa.o, remote-utils-ipa.o) (regcache-ipa.o, i386-linux-ipa.o, linux-i386-ipa.o) (linux-amd64-ipa.o, amd64-linux-ipa.o): New rules. * linux-amd64-ipa.c, linux-i386-ipa.c: New files. * configure.ac: Check for atomic builtins support in the compiler. (IPA_DEPFILES, extra_libraries): Define. * configure.srv (ipa_obj): Add description. (ipa_i386_linux_regobj, ipa_amd64_linux_regobj): Define. (i[34567]86-*-linux*): Set ipa_obj. (x86_64-*-linux*): Set ipa_obj. * linux-low.c (stabilizing_threads): New. (supports_fast_tracepoints): New. (linux_detach): Stabilize threads before detaching. (handle_tracepoints): Handle internal tracing breakpoints. Assert the lwp is either not stabilizing, or is moving out of a jump pad. (linux_fast_tracepoint_collecting): New. (maybe_move_out_of_jump_pad): New. (enqueue_one_deferred_signal): New. (dequeue_one_deferred_signal): New. (linux_wait_for_event_1): If moving out of a jump pad, defer pending signals to later. (linux_stabilize_threads): New. (linux_wait_1): Check if threads need moving out of jump pads, and do it if so. (stuck_in_jump_pad_callback): New. (move_out_of_jump_pad_callback): New. (lwp_running): New. (linux_resume_one_lwp): Handle moving out of jump pads. (linux_set_resume_request): Dequeue deferred signals. (need_step_over_p): Also step over fast tracepoint jumps. (start_step_over): Also uninsert fast tracepoint jumps. (finish_step_over): Also reinsert fast tracepoint jumps. (linux_install_fast_tracepoint_jump): New. (linux_target_ops): Install linux_stabilize_threads and linux_install_fast_tracepoint_jump_pad. * linux-low.h (linux_target_ops) <get_thread_area, install_fast_tracepoint_jump_pad>: New fields. (struct lwp_info) <collecting_fast_tracepoint, pending_signals_to_report, exit_jump_pad_bkpt>: New fields. (linux_get_thread_area): Declare. * linux-x86-low.c (jump_insn): New. (x86_get_thread_area): New. (append_insns): New. (push_opcode): New. (amd64_install_fast_tracepoint_jump_pad): New. (i386_install_fast_tracepoint_jump_pad): New. (x86_install_fast_tracepoint_jump_pad): New. (the_low_target): Install x86_get_thread_area and x86_install_fast_tracepoint_jump_pad. * mem-break.c (set_raw_breakpoint_at): Use read_inferior_memory. (struct fast_tracepoint_jump): New. (fast_tracepoint_jump_insn): New. (fast_tracepoint_jump_shadow): New. (find_fast_tracepoint_jump_at): New. (fast_tracepoint_jump_here): New. (delete_fast_tracepoint_jump): New. (set_fast_tracepoint_jump): New. (uninsert_fast_tracepoint_jumps_at): New. (reinsert_fast_tracepoint_jumps_at): New. (set_breakpoint_at): Use write_inferior_memory. (uninsert_raw_breakpoint): Use write_inferior_memory. (check_mem_read): Mask out fast tracepoint jumps. (check_mem_write): Mask out fast tracepoint jumps. * mem-break.h (struct fast_tracepoint_jump): Forward declare. (set_fast_tracepoint_jump): Declare. (delete_fast_tracepoint_jump) (fast_tracepoint_jump_here, uninsert_fast_tracepoint_jumps_at) (reinsert_fast_tracepoint_jumps_at): Declare. * regcache.c: Don't compile many functions when building the in-process agent library. (init_register_cache) [IN_PROCESS_AGENT]: Don't allow allocating the register buffer in the heap. (free_register_cache): If the register buffer isn't owned by the regcache, don't free it. (set_register_cache) [IN_PROCESS_AGENT]: Don't re-alocate pre-existing register caches. * remote-utils.c (convert_int_to_ascii): Constify `from' parameter type. (convert_ascii_to_int): : Constify `from' parameter type. (decode_M_packet, decode_X_packet): Replace the `to' parameter by a `to_p' pointer to pointer parameter. If TO_P is NULL, malloc the needed buffer in-place. (relocate_instruction): New. * server.c (handle_query) <qSymbols>: If the target supports tracepoints, give it a chance of looking up symbols. Report support for fast tracepoints. (handle_status): Stabilize threads. (process_serial_event): Adjust. * server.h (struct fast_tracepoint_jump): Forward declare. (struct process_info) <fast_tracepoint_jumps>: New field. (convert_ascii_to_int, convert_int_to_ascii): Adjust. (decode_X_packet, decode_M_packet): Adjust. (relocate_instruction): Declare. (in_process_agent_loaded): Declare. (tracepoint_look_up_symbols): Declare. (struct fast_tpoint_collect_status): Declare. (fast_tracepoint_collecting): Declare. (force_unlock_trace_buffer): Declare. (handle_tracepoint_bkpts): Declare. (initialize_low_tracepoint) (supply_fast_tracepoint_registers) [IN_PROCESS_AGENT]: Declare. * target.h (struct target_ops) <stabilize_threads, install_fast_tracepoint_jump_pad>: New fields. (stabilize_threads, install_fast_tracepoint_jump_pad): New. * tracepoint.c [HAVE_MALLOC_H]: Include malloc.h. [HAVE_STDINT_H]: Include stdint.h. (trace_debug_1): Rename to ... (trace_vdebug): ... this. (trace_debug): Rename to ... (trace_debug_1): ... this. Add `level' parameter. (trace_debug): New. (ATTR_USED, ATTR_NOINLINE): New. (IP_AGENT_EXPORT): New. (gdb_tp_heap_buffer, gdb_jump_pad_buffer, gdb_jump_pad_buffer_end) (collecting, gdb_collect, stop_tracing, flush_trace_buffer) (about_to_request_buffer_space, trace_buffer_is_full) (stopping_tracepoint, expr_eval_result, error_tracepoint) (tracepoints, tracing, trace_buffer_ctrl, trace_buffer_ctrl_curr) (trace_buffer_lo, trace_buffer_hi, traceframe_read_count) (traceframe_write_count, traceframes_created) (trace_state_variables) New renaming defines. (struct ipa_sym_addresses): New. (STRINGIZE_1, STRINGIZE, IPA_SYM): New. (symbol_list): New. (ipa_sym_addrs): New. (all_tracepoint_symbols_looked_up): New. (in_process_agent_loaded): New. (write_e_ipa_not_loaded): New. (maybe_write_ipa_not_loaded): New. (tracepoint_look_up_symbols): New. (debug_threads) [IN_PROCESS_AGENT]: New. (read_inferior_memory) [IN_PROCESS_AGENT]: New. (UNKNOWN_SIDE_EFFECTS): New. (stop_tracing): New. (flush_trace_buffer): New. (stop_tracing_bkpt): New. (flush_trace_buffer_bkpt): New. (read_inferior_integer): New. (read_inferior_uinteger): New. (read_inferior_data_pointer): New. (write_inferior_data_pointer): New. (write_inferior_integer): New. (write_inferior_uinteger): New. (struct collect_static_trace_data_action): Delete. (enum tracepoint_type): New. (struct tracepoint) <type>: New field `type'. <actions_str, step_actions, step_actions_str>: Only include in GDBserver. <orig_size, obj_addr_on_target, adjusted_insn_addr> <adjusted_insn_addr_end, jump_pad, jump_pad_end>: New fields. (tracepoints): Use IP_AGENT_EXPORT. (last_tracepoint): Don't include in the IPA. (stopping_tracepoint): Use IP_AGENT_EXPORT. (trace_buffer_is_full): Use IP_AGENT_EXPORT. (alloced_trace_state_variables): New. (trace_state_variables): Use IP_AGENT_EXPORT. (traceframe_t): Delete unused variable. (circular_trace_buffer): Don't include in the IPA. (trace_buffer_start): Delete. (struct trace_buffer_control): New. (trace_buffer_free): Delete. (struct ipa_trace_buffer_control): New. (GDBSERVER_FLUSH_COUNT_MASK, GDBSERVER_FLUSH_COUNT_MASK_PREV) (GDBSERVER_FLUSH_COUNT_MASK_CURR, GDBSERVER_UPDATED_FLUSH_COUNT_BIT): New. (trace_buffer_ctrl): New. (TRACE_BUFFER_CTRL_CURR): New. (trace_buffer_start, trace_buffer_free, trace_buffer_end_free): Reimplement as macros. (trace_buffer_wrap): Delete. (traceframe_write_count, traceframe_read_count) (traceframes_created, tracing): Use IP_AGENT_EXPORT. (struct tracepoint_hit_ctx) <type>: New field. (struct fast_tracepoint_ctx): New. (memory_barrier): New. (cmpxchg): New. (record_tracepoint_error): Update atomically in the IPA. (clear_inferior_trace_buffer): New. (about_to_request_buffer_space): New. (trace_buffer_alloc): Handle GDBserver and inferior simulatenous updating the same buffer. (add_tracepoint): Default the tracepoint's type to trap tracepoint, and orig_size to -1. (get_trace_state_variable) [IN_PROCESS_AGENT]: Handle allocated internal variables. (create_trace_state_variable): New parameter `gdb'. Handle it. (clear_installed_tracepoints): Clear fast tracepoint jumps. (cmd_qtdp): Handle fast tracepoints. (cmd_qtdv): Adjust. (max_jump_pad_size): New. (gdb_jump_pad_head): New. (get_jump_space_head): New. (claim_jump_space): New. (sort_tracepoints): New. (MAX_JUMP_SIZE): New. (cmd_qtstart): Handle fast tracepoints. Sync tracepoints with the IPA. (stop_tracing) [IN_PROCESS_AGENT]: Don't include the tdisconnected support. Upload fast traceframes, and delete internal IPA breakpoints. (stop_tracing_handler): New. (flush_trace_buffer_handler): New. (cmd_qtstop): Upload fast tracepoints. (response_tracepoint): Handle fast tracepoints. (tracepoint_finished_step): Upload fast traceframes. Set the tracepoint hit context's tracepoint type. (handle_tracepoint_bkpts): New. (tracepoint_was_hit): Set the tracepoint hit context's tracepoint type. Add comment about fast tracepoints. (collect_data_at_tracepoint) [IN_PROCESS_AGENT]: Don't access the non-existing action_str field. (get_context_regcache): Handle fast tracepoints. (do_action_at_tracepoint) [!IN_PROCESS_AGENT]: Don't write the PC to the regcache. (fast_tracepoint_from_jump_pad_address): New. (fast_tracepoint_from_ipa_tpoint_address): New. (collecting_t): New. (force_unlock_trace_buffer): New. (fast_tracepoint_collecting): New. (collecting): New. (gdb_collect): New. (write_inferior_data_ptr): New. (target_tp_heap): New. (target_malloc): New. (download_agent_expr): New. (UALIGN): New. (download_tracepoints): New. (download_trace_state_variables): New. (upload_fast_traceframes): New. (IPA_FIRST_TRACEFRAME): New. (IPA_NEXT_TRACEFRAME_1): New. (IPA_NEXT_TRACEFRAME): New. [IN_PROCESS_AGENT]: Include sys/mman.h and fcntl.h. [IN_PROCESS_AGENT] (gdb_tp_heap_buffer, gdb_jump_pad_buffer) (gdb_jump_pad_buffer_end): New. [IN_PROCESS_AGENT] (initialize_tracepoint_ftlib): New. (initialize_tracepoint): Adjust. [IN_PROCESS_AGENT]: Allocate the IPA heap, and jump pad scratch buffer. Initialize the low module. * utils.c (PREFIX, TOOLNAME): New. (malloc_failure): Use PREFIX. (error): In the IPA, an error causes an exit. (fatal, warning): Use PREFIX. (internal_error): Use TOOLNAME. (NUMCELLS): Increase to 10. * configure, config.in: Regenerate. gdb/ 2010-06-01 Pedro Alves <pedro@codesourcery.com> * NEWS: Mention gdbserver fast tracepoints support. gdb/doc/ 2010-06-01 Pedro Alves <pedro@codesourcery.com> * gdb.texinfo (Set Tracepoints): Mention tracepoints support in gdbserver, and add cross reference. (Tracepoints support in gdbserver): New subsection.
2010-06-01 15:20:52 +02:00
/* Insert a fast tracepoint jump at WHERE, using instruction INSN, of
LENGTH bytes. */
struct fast_tracepoint_jump *set_fast_tracepoint_jump (CORE_ADDR where,
unsigned char *insn,
ULONGEST length);
/* Increment reference counter of JP. */
void inc_ref_fast_tracepoint_jump (struct fast_tracepoint_jump *jp);
gdb/gdbserver/ 2010-06-01 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> * Makefile.in (IPA_DEPFILES, extra_libraries): New. (all): Depend on $(extra_libraries). (install-only): Install the IPA. (IPA_OBJS, IPA_LIB): New. (clean): Remove the IPA lib. (IPAGENT_CFLAGS): New. (tracepoint-ipa.o, utils-ipa.o, remote-utils-ipa.o) (regcache-ipa.o, i386-linux-ipa.o, linux-i386-ipa.o) (linux-amd64-ipa.o, amd64-linux-ipa.o): New rules. * linux-amd64-ipa.c, linux-i386-ipa.c: New files. * configure.ac: Check for atomic builtins support in the compiler. (IPA_DEPFILES, extra_libraries): Define. * configure.srv (ipa_obj): Add description. (ipa_i386_linux_regobj, ipa_amd64_linux_regobj): Define. (i[34567]86-*-linux*): Set ipa_obj. (x86_64-*-linux*): Set ipa_obj. * linux-low.c (stabilizing_threads): New. (supports_fast_tracepoints): New. (linux_detach): Stabilize threads before detaching. (handle_tracepoints): Handle internal tracing breakpoints. Assert the lwp is either not stabilizing, or is moving out of a jump pad. (linux_fast_tracepoint_collecting): New. (maybe_move_out_of_jump_pad): New. (enqueue_one_deferred_signal): New. (dequeue_one_deferred_signal): New. (linux_wait_for_event_1): If moving out of a jump pad, defer pending signals to later. (linux_stabilize_threads): New. (linux_wait_1): Check if threads need moving out of jump pads, and do it if so. (stuck_in_jump_pad_callback): New. (move_out_of_jump_pad_callback): New. (lwp_running): New. (linux_resume_one_lwp): Handle moving out of jump pads. (linux_set_resume_request): Dequeue deferred signals. (need_step_over_p): Also step over fast tracepoint jumps. (start_step_over): Also uninsert fast tracepoint jumps. (finish_step_over): Also reinsert fast tracepoint jumps. (linux_install_fast_tracepoint_jump): New. (linux_target_ops): Install linux_stabilize_threads and linux_install_fast_tracepoint_jump_pad. * linux-low.h (linux_target_ops) <get_thread_area, install_fast_tracepoint_jump_pad>: New fields. (struct lwp_info) <collecting_fast_tracepoint, pending_signals_to_report, exit_jump_pad_bkpt>: New fields. (linux_get_thread_area): Declare. * linux-x86-low.c (jump_insn): New. (x86_get_thread_area): New. (append_insns): New. (push_opcode): New. (amd64_install_fast_tracepoint_jump_pad): New. (i386_install_fast_tracepoint_jump_pad): New. (x86_install_fast_tracepoint_jump_pad): New. (the_low_target): Install x86_get_thread_area and x86_install_fast_tracepoint_jump_pad. * mem-break.c (set_raw_breakpoint_at): Use read_inferior_memory. (struct fast_tracepoint_jump): New. (fast_tracepoint_jump_insn): New. (fast_tracepoint_jump_shadow): New. (find_fast_tracepoint_jump_at): New. (fast_tracepoint_jump_here): New. (delete_fast_tracepoint_jump): New. (set_fast_tracepoint_jump): New. (uninsert_fast_tracepoint_jumps_at): New. (reinsert_fast_tracepoint_jumps_at): New. (set_breakpoint_at): Use write_inferior_memory. (uninsert_raw_breakpoint): Use write_inferior_memory. (check_mem_read): Mask out fast tracepoint jumps. (check_mem_write): Mask out fast tracepoint jumps. * mem-break.h (struct fast_tracepoint_jump): Forward declare. (set_fast_tracepoint_jump): Declare. (delete_fast_tracepoint_jump) (fast_tracepoint_jump_here, uninsert_fast_tracepoint_jumps_at) (reinsert_fast_tracepoint_jumps_at): Declare. * regcache.c: Don't compile many functions when building the in-process agent library. (init_register_cache) [IN_PROCESS_AGENT]: Don't allow allocating the register buffer in the heap. (free_register_cache): If the register buffer isn't owned by the regcache, don't free it. (set_register_cache) [IN_PROCESS_AGENT]: Don't re-alocate pre-existing register caches. * remote-utils.c (convert_int_to_ascii): Constify `from' parameter type. (convert_ascii_to_int): : Constify `from' parameter type. (decode_M_packet, decode_X_packet): Replace the `to' parameter by a `to_p' pointer to pointer parameter. If TO_P is NULL, malloc the needed buffer in-place. (relocate_instruction): New. * server.c (handle_query) <qSymbols>: If the target supports tracepoints, give it a chance of looking up symbols. Report support for fast tracepoints. (handle_status): Stabilize threads. (process_serial_event): Adjust. * server.h (struct fast_tracepoint_jump): Forward declare. (struct process_info) <fast_tracepoint_jumps>: New field. (convert_ascii_to_int, convert_int_to_ascii): Adjust. (decode_X_packet, decode_M_packet): Adjust. (relocate_instruction): Declare. (in_process_agent_loaded): Declare. (tracepoint_look_up_symbols): Declare. (struct fast_tpoint_collect_status): Declare. (fast_tracepoint_collecting): Declare. (force_unlock_trace_buffer): Declare. (handle_tracepoint_bkpts): Declare. (initialize_low_tracepoint) (supply_fast_tracepoint_registers) [IN_PROCESS_AGENT]: Declare. * target.h (struct target_ops) <stabilize_threads, install_fast_tracepoint_jump_pad>: New fields. (stabilize_threads, install_fast_tracepoint_jump_pad): New. * tracepoint.c [HAVE_MALLOC_H]: Include malloc.h. [HAVE_STDINT_H]: Include stdint.h. (trace_debug_1): Rename to ... (trace_vdebug): ... this. (trace_debug): Rename to ... (trace_debug_1): ... this. Add `level' parameter. (trace_debug): New. (ATTR_USED, ATTR_NOINLINE): New. (IP_AGENT_EXPORT): New. (gdb_tp_heap_buffer, gdb_jump_pad_buffer, gdb_jump_pad_buffer_end) (collecting, gdb_collect, stop_tracing, flush_trace_buffer) (about_to_request_buffer_space, trace_buffer_is_full) (stopping_tracepoint, expr_eval_result, error_tracepoint) (tracepoints, tracing, trace_buffer_ctrl, trace_buffer_ctrl_curr) (trace_buffer_lo, trace_buffer_hi, traceframe_read_count) (traceframe_write_count, traceframes_created) (trace_state_variables) New renaming defines. (struct ipa_sym_addresses): New. (STRINGIZE_1, STRINGIZE, IPA_SYM): New. (symbol_list): New. (ipa_sym_addrs): New. (all_tracepoint_symbols_looked_up): New. (in_process_agent_loaded): New. (write_e_ipa_not_loaded): New. (maybe_write_ipa_not_loaded): New. (tracepoint_look_up_symbols): New. (debug_threads) [IN_PROCESS_AGENT]: New. (read_inferior_memory) [IN_PROCESS_AGENT]: New. (UNKNOWN_SIDE_EFFECTS): New. (stop_tracing): New. (flush_trace_buffer): New. (stop_tracing_bkpt): New. (flush_trace_buffer_bkpt): New. (read_inferior_integer): New. (read_inferior_uinteger): New. (read_inferior_data_pointer): New. (write_inferior_data_pointer): New. (write_inferior_integer): New. (write_inferior_uinteger): New. (struct collect_static_trace_data_action): Delete. (enum tracepoint_type): New. (struct tracepoint) <type>: New field `type'. <actions_str, step_actions, step_actions_str>: Only include in GDBserver. <orig_size, obj_addr_on_target, adjusted_insn_addr> <adjusted_insn_addr_end, jump_pad, jump_pad_end>: New fields. (tracepoints): Use IP_AGENT_EXPORT. (last_tracepoint): Don't include in the IPA. (stopping_tracepoint): Use IP_AGENT_EXPORT. (trace_buffer_is_full): Use IP_AGENT_EXPORT. (alloced_trace_state_variables): New. (trace_state_variables): Use IP_AGENT_EXPORT. (traceframe_t): Delete unused variable. (circular_trace_buffer): Don't include in the IPA. (trace_buffer_start): Delete. (struct trace_buffer_control): New. (trace_buffer_free): Delete. (struct ipa_trace_buffer_control): New. (GDBSERVER_FLUSH_COUNT_MASK, GDBSERVER_FLUSH_COUNT_MASK_PREV) (GDBSERVER_FLUSH_COUNT_MASK_CURR, GDBSERVER_UPDATED_FLUSH_COUNT_BIT): New. (trace_buffer_ctrl): New. (TRACE_BUFFER_CTRL_CURR): New. (trace_buffer_start, trace_buffer_free, trace_buffer_end_free): Reimplement as macros. (trace_buffer_wrap): Delete. (traceframe_write_count, traceframe_read_count) (traceframes_created, tracing): Use IP_AGENT_EXPORT. (struct tracepoint_hit_ctx) <type>: New field. (struct fast_tracepoint_ctx): New. (memory_barrier): New. (cmpxchg): New. (record_tracepoint_error): Update atomically in the IPA. (clear_inferior_trace_buffer): New. (about_to_request_buffer_space): New. (trace_buffer_alloc): Handle GDBserver and inferior simulatenous updating the same buffer. (add_tracepoint): Default the tracepoint's type to trap tracepoint, and orig_size to -1. (get_trace_state_variable) [IN_PROCESS_AGENT]: Handle allocated internal variables. (create_trace_state_variable): New parameter `gdb'. Handle it. (clear_installed_tracepoints): Clear fast tracepoint jumps. (cmd_qtdp): Handle fast tracepoints. (cmd_qtdv): Adjust. (max_jump_pad_size): New. (gdb_jump_pad_head): New. (get_jump_space_head): New. (claim_jump_space): New. (sort_tracepoints): New. (MAX_JUMP_SIZE): New. (cmd_qtstart): Handle fast tracepoints. Sync tracepoints with the IPA. (stop_tracing) [IN_PROCESS_AGENT]: Don't include the tdisconnected support. Upload fast traceframes, and delete internal IPA breakpoints. (stop_tracing_handler): New. (flush_trace_buffer_handler): New. (cmd_qtstop): Upload fast tracepoints. (response_tracepoint): Handle fast tracepoints. (tracepoint_finished_step): Upload fast traceframes. Set the tracepoint hit context's tracepoint type. (handle_tracepoint_bkpts): New. (tracepoint_was_hit): Set the tracepoint hit context's tracepoint type. Add comment about fast tracepoints. (collect_data_at_tracepoint) [IN_PROCESS_AGENT]: Don't access the non-existing action_str field. (get_context_regcache): Handle fast tracepoints. (do_action_at_tracepoint) [!IN_PROCESS_AGENT]: Don't write the PC to the regcache. (fast_tracepoint_from_jump_pad_address): New. (fast_tracepoint_from_ipa_tpoint_address): New. (collecting_t): New. (force_unlock_trace_buffer): New. (fast_tracepoint_collecting): New. (collecting): New. (gdb_collect): New. (write_inferior_data_ptr): New. (target_tp_heap): New. (target_malloc): New. (download_agent_expr): New. (UALIGN): New. (download_tracepoints): New. (download_trace_state_variables): New. (upload_fast_traceframes): New. (IPA_FIRST_TRACEFRAME): New. (IPA_NEXT_TRACEFRAME_1): New. (IPA_NEXT_TRACEFRAME): New. [IN_PROCESS_AGENT]: Include sys/mman.h and fcntl.h. [IN_PROCESS_AGENT] (gdb_tp_heap_buffer, gdb_jump_pad_buffer) (gdb_jump_pad_buffer_end): New. [IN_PROCESS_AGENT] (initialize_tracepoint_ftlib): New. (initialize_tracepoint): Adjust. [IN_PROCESS_AGENT]: Allocate the IPA heap, and jump pad scratch buffer. Initialize the low module. * utils.c (PREFIX, TOOLNAME): New. (malloc_failure): Use PREFIX. (error): In the IPA, an error causes an exit. (fatal, warning): Use PREFIX. (internal_error): Use TOOLNAME. (NUMCELLS): Increase to 10. * configure, config.in: Regenerate. gdb/ 2010-06-01 Pedro Alves <pedro@codesourcery.com> * NEWS: Mention gdbserver fast tracepoints support. gdb/doc/ 2010-06-01 Pedro Alves <pedro@codesourcery.com> * gdb.texinfo (Set Tracepoints): Mention tracepoints support in gdbserver, and add cross reference. (Tracepoints support in gdbserver): New subsection.
2010-06-01 15:20:52 +02:00
/* Delete fast tracepoint jump TODEL from our tables, and uninsert if
from memory. */
int delete_fast_tracepoint_jump (struct fast_tracepoint_jump *todel);
/* Returns true if there's fast tracepoint jump set at WHERE. */
int fast_tracepoint_jump_here (CORE_ADDR);
/* Uninsert fast tracepoint jumps at WHERE (and change their status to
uninserted). This still leaves the tracepoints in the table. */
void uninsert_fast_tracepoint_jumps_at (CORE_ADDR pc);
/* Reinsert fast tracepoint jumps at WHERE (and change their status to
inserted). */
void reinsert_fast_tracepoint_jumps_at (CORE_ADDR where);
#endif /* MEM_BREAK_H */