binutils-gdb/gdb/configure.in

1223 lines
35 KiB
Plaintext
Raw Normal View History

dnl Autoconf configure script for GDB, the GNU debugger.
Adapt support for SSE registers in Linux/x86 for Linux 2.4. * i386-linux-nat.c: Various doc fixes. Include "i387-nat.h". (GETFPXREGS_SUPPLIES): Renamed from GETXFPREGS_SUPPLIES. (have_ptrace_getfpxregs): Renamed from have_ptrace_getxfpregs. (convert_to_gregset): Removed. Moved logic to ... (fill_gregset): ... here. Simplified function. (fetch_regs): Use perror_with_name for error reporting. (store_regs): Add `regno' parameter. Use perror_with_name for error reporting. Call fill_gregset instead of convert_to_gregset. (FPREG_ADDR): Remove. (supply_fpregset): Implement by calling i387_supply_fsave. (convert_to_fpregset): Remove. (fill_fpregset): Implement by calling i387_fill_fsave. (fetch_fpregs): Use perror_with_name fro error reporting. (store_fpregs) Add `regno' parameter. Use perror_with_name fro error reporting. Call fill_fpregset instead of convert_to_fpregset. (supply_xfpregset, convert_to_xfpregset): Removed. (supply_fpxregset, fill_fpxregset): New functions. (fetch_fpxregs): Renamed from fetch_xfpregs. Use perror_with_name for error reporting. Call supply_fpxregset instead of supply_xfpregset. (store_xfpregs): Removed. (store_fpxregs): New function. (fetch_inferior_registers): Adjust for xfp -> fpx change. Tweak message in call to internal_error. (store_inferior_registers): Adjust for xfp ->fpx change. Pass REGNO to store_regs, store_fpregs and store_fpxregs. (fetch_core_registers): Adjust for xfp -> fpx change. * acconfig.h (HAVE_PTRACE_GETFPXREGS): Renamed from HAVE_PTRACE_GETXFPREGS. * config.in: Regenerated. * configure.in: Replace check for PTRACE_GETXFPREGS with check for PTRACE_GETFPXREGS. Remove comment about Cygnus SSE extensions. * configure: Regenerated. * config/i386/linux.mh (NATDEPFILES): Add i387-nat.o. * config/i386/tm-linux.h: Base definition of HAVE_SSE_REGS on HAVE_PTRACE_GETFPXREGS instead of HAVE_PTRACE_GETXFPREGS.
2000-08-10 19:04:33 +02:00
dnl Copyright 1995, 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
dnl
dnl This file is part of GDB.
dnl
dnl This program is free software; you can redistribute it and/or modify
dnl it under the terms of the GNU General Public License as published by
dnl the Free Software Foundation; either version 2 of the License, or
dnl (at your option) any later version.
dnl
dnl This program is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
dnl GNU General Public License for more details.
dnl
dnl You should have received a copy of the GNU General Public License
dnl along with this program; if not, write to the Free Software
dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
dnl Process this file with autoconf to produce a configure script.
AC_PREREQ(2.13)dnl
AC_INIT(main.c)
AC_CONFIG_HEADER(config.h:config.in)
AM_MAINTAINER_MODE
AC_PROG_CC
AC_AIX
AC_ISC_POSIX
AM_PROG_CC_STDC
AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..)
AC_CANONICAL_SYSTEM
dnl gdb doesn't use gettext, but bfd does. We call this to ensure we
dnl link with the correct libraries.
ALL_LINGUAS=
CY_GNU_GETTEXT
dnl List of object files added by configure.
CONFIG_OBS=
CONFIG_LIB_OBS=
CONFIG_DEPS=
CONFIG_SRCS=
CONFIG_INITS=
ENABLE_CFLAGS=
CONFIG_ALL=
CONFIG_CLEAN=
CONFIG_INSTALL=
CONFIG_UNINSTALL=
configdirs="doc testsuite"
1999-08-09 23:36:23 +02:00
AC_ARG_ENABLE(multi-ice,
[ --enable-multi-ice Build the multi-ice-gdb-server],
[case "${enableval}" in
yes ) enable_multi_ice="yes" ;;
no) enable_multi_ice="no" ;;
*) AC_MSG_ERROR(Bad value for --enable-multi-ice: ${enableval}) ;;
esac
])
if test "${enable_multi_ice}" = "yes"; then
configdirs="${configdirs} multi-ice"
fi
dnl
changequote(,)dnl
. ${srcdir}/configure.host
. ${srcdir}/configure.tgt
targ=${target} ; . ${srcdir}/../bfd/config.bfd
dnl
changequote([,])dnl
dnl use BFD to determine the default architecture and byte order
dnl (bfd_vec->byteorder provides the latter).
targ=${target}
. ${srcdir}/../bfd/config.bfd
2000-06-11 03:39:08 +02:00
dnl We only want the first arch, if there is more than one.
targ_archs=`echo ${targ_archs} | sed -e 's/ .*//;'`
if test x"${targ_archs}" != x ; then
AC_DEFINE_UNQUOTED(DEFAULT_BFD_ARCH, ${targ_archs})
fi
if test x"${targ_defvec}" != x ; then
AC_DEFINE_UNQUOTED(DEFAULT_BFD_VEC, ${targ_defvec})
fi
1999-04-26 20:34:20 +02:00
AC_PROG_AWK
AC_PROG_INSTALL
AC_CHECK_TOOL(AR, ar)
AC_CHECK_TOOL(RANLIB, ranlib, :)
AC_CHECK_TOOL(DLLTOOL, dlltool)
AC_CHECK_TOOL(WINDRES, windres)
AC_PROG_YACC
dnl MiG is needed for the Hurd.
AC_CHECK_TOOL(MIG, mig)
AC_ARG_PROGRAM
AC_TYPE_SIGNAL
AC_HEADER_STDC
dnl Solaris 7 needs _MSE_INT_H defined to avoid a clash between <widec.h>
dnl and <wchar.h> that causes AC_CHECK_HEADERS to think <curses.h> doesn't
dnl exist.
case $host_os in solaris2.7 | solaris2.8) case "$GCC" in yes)
AC_DEFINE(_MSE_INT_H)
esac; esac
AC_CHECK_HEADERS(ctype.h endian.h link.h thread_db.h proc_service.h \
memory.h objlist.h ptrace.h sgtty.h stddef.h stdlib.h \
1999-12-22 22:45:38 +01:00
string.h sys/procfs.h sys/ptrace.h sys/reg.h stdint.h \
term.h termio.h termios.h unistd.h wait.h sys/wait.h \
1999-08-31 03:14:27 +02:00
wchar.h wctype.h asm/debugreg.h sys/debugreg.h sys/select.h \
time.h sys/ioctl.h sys/user.h \
dirent.h sys/ndir.h sys/dir.h ndir.h \
2000-07-05 12:25:43 +02:00
curses.h ncurses.h \
poll.h sys/poll.h)
AC_HEADER_STAT
AC_C_CONST
AC_CHECK_FUNCS(setpgid sbrk sigaction isascii bzero bcopy btowc poll sigprocmask vfork)
AC_FUNC_ALLOCA
# See if machine/reg.h supports the %fs and %gs i386 segment registers.
# Older i386 BSD's don't have the r_fs and r_gs members of `struct reg'.
AC_CACHE_CHECK([for r_fs in struct reg], gdb_cv_struct_reg_r_fs,
[AC_TRY_COMPILE([#include <machine/reg.h>], [struct reg r; r.r_fs;],
gdb_cv_struct_reg_r_fs=yes, gdb_cv_struct_reg_r_fs=no)])
if test $gdb_cv_struct_reg_r_fs = yes; then
AC_DEFINE(HAVE_STRUCT_REG_R_FS)
fi
AC_CACHE_CHECK([for r_gs in struct reg], gdb_cv_struct_reg_r_gs,
[AC_TRY_COMPILE([#include <machine/reg.h>], [struct reg r; r.r_gs;],
gdb_cv_struct_reg_r_gs=yes, gdb_cv_struct_reg_r_gs=no)])
if test $gdb_cv_struct_reg_r_gs = yes; then
AC_DEFINE(HAVE_STRUCT_REG_R_GS)
fi
dnl See if ptrace.h provides the PTRACE_GETREGS request.
AC_MSG_CHECKING(for PTRACE_GETREGS)
AC_CACHE_VAL(gdb_cv_have_ptrace_getregs,
[AC_TRY_COMPILE([#include <sys/ptrace.h>],
[PTRACE_GETREGS;],
[gdb_cv_have_ptrace_getregs=yes],
[gdb_cv_have_ptrace_getregs=no])])
AC_MSG_RESULT($gdb_cv_have_ptrace_getregs)
if test $gdb_cv_have_ptrace_getregs = yes; then
AC_DEFINE(HAVE_PTRACE_GETREGS)
fi
Adapt support for SSE registers in Linux/x86 for Linux 2.4. * i386-linux-nat.c: Various doc fixes. Include "i387-nat.h". (GETFPXREGS_SUPPLIES): Renamed from GETXFPREGS_SUPPLIES. (have_ptrace_getfpxregs): Renamed from have_ptrace_getxfpregs. (convert_to_gregset): Removed. Moved logic to ... (fill_gregset): ... here. Simplified function. (fetch_regs): Use perror_with_name for error reporting. (store_regs): Add `regno' parameter. Use perror_with_name for error reporting. Call fill_gregset instead of convert_to_gregset. (FPREG_ADDR): Remove. (supply_fpregset): Implement by calling i387_supply_fsave. (convert_to_fpregset): Remove. (fill_fpregset): Implement by calling i387_fill_fsave. (fetch_fpregs): Use perror_with_name fro error reporting. (store_fpregs) Add `regno' parameter. Use perror_with_name fro error reporting. Call fill_fpregset instead of convert_to_fpregset. (supply_xfpregset, convert_to_xfpregset): Removed. (supply_fpxregset, fill_fpxregset): New functions. (fetch_fpxregs): Renamed from fetch_xfpregs. Use perror_with_name for error reporting. Call supply_fpxregset instead of supply_xfpregset. (store_xfpregs): Removed. (store_fpxregs): New function. (fetch_inferior_registers): Adjust for xfp -> fpx change. Tweak message in call to internal_error. (store_inferior_registers): Adjust for xfp ->fpx change. Pass REGNO to store_regs, store_fpregs and store_fpxregs. (fetch_core_registers): Adjust for xfp -> fpx change. * acconfig.h (HAVE_PTRACE_GETFPXREGS): Renamed from HAVE_PTRACE_GETXFPREGS. * config.in: Regenerated. * configure.in: Replace check for PTRACE_GETXFPREGS with check for PTRACE_GETFPXREGS. Remove comment about Cygnus SSE extensions. * configure: Regenerated. * config/i386/linux.mh (NATDEPFILES): Add i387-nat.o. * config/i386/tm-linux.h: Base definition of HAVE_SSE_REGS on HAVE_PTRACE_GETFPXREGS instead of HAVE_PTRACE_GETXFPREGS.
2000-08-10 19:04:33 +02:00
dnl See if ptrace.h provides the PTRACE_GETFPXREGS request.
AC_MSG_CHECKING(for PTRACE_GETFPXREGS)
AC_CACHE_VAL(gdb_cv_have_ptrace_getfpxregs,
1999-11-02 05:44:47 +01:00
[AC_TRY_COMPILE([#include <sys/ptrace.h>],
Adapt support for SSE registers in Linux/x86 for Linux 2.4. * i386-linux-nat.c: Various doc fixes. Include "i387-nat.h". (GETFPXREGS_SUPPLIES): Renamed from GETXFPREGS_SUPPLIES. (have_ptrace_getfpxregs): Renamed from have_ptrace_getxfpregs. (convert_to_gregset): Removed. Moved logic to ... (fill_gregset): ... here. Simplified function. (fetch_regs): Use perror_with_name for error reporting. (store_regs): Add `regno' parameter. Use perror_with_name for error reporting. Call fill_gregset instead of convert_to_gregset. (FPREG_ADDR): Remove. (supply_fpregset): Implement by calling i387_supply_fsave. (convert_to_fpregset): Remove. (fill_fpregset): Implement by calling i387_fill_fsave. (fetch_fpregs): Use perror_with_name fro error reporting. (store_fpregs) Add `regno' parameter. Use perror_with_name fro error reporting. Call fill_fpregset instead of convert_to_fpregset. (supply_xfpregset, convert_to_xfpregset): Removed. (supply_fpxregset, fill_fpxregset): New functions. (fetch_fpxregs): Renamed from fetch_xfpregs. Use perror_with_name for error reporting. Call supply_fpxregset instead of supply_xfpregset. (store_xfpregs): Removed. (store_fpxregs): New function. (fetch_inferior_registers): Adjust for xfp -> fpx change. Tweak message in call to internal_error. (store_inferior_registers): Adjust for xfp ->fpx change. Pass REGNO to store_regs, store_fpregs and store_fpxregs. (fetch_core_registers): Adjust for xfp -> fpx change. * acconfig.h (HAVE_PTRACE_GETFPXREGS): Renamed from HAVE_PTRACE_GETXFPREGS. * config.in: Regenerated. * configure.in: Replace check for PTRACE_GETXFPREGS with check for PTRACE_GETFPXREGS. Remove comment about Cygnus SSE extensions. * configure: Regenerated. * config/i386/linux.mh (NATDEPFILES): Add i387-nat.o. * config/i386/tm-linux.h: Base definition of HAVE_SSE_REGS on HAVE_PTRACE_GETFPXREGS instead of HAVE_PTRACE_GETXFPREGS.
2000-08-10 19:04:33 +02:00
[PTRACE_GETFPXREGS;],
[gdb_cv_have_ptrace_getfpxregs=yes],
[gdb_cv_have_ptrace_getfpxregs=no])])
AC_MSG_RESULT($gdb_cv_have_ptrace_getfpxregs)
if test $gdb_cv_have_ptrace_getfpxregs = yes; then
AC_DEFINE(HAVE_PTRACE_GETFPXREGS)
1999-11-02 05:44:47 +01:00
fi
1999-08-16 21:57:19 +02:00
AC_CHECK_LIB(socket, socketpair)
AC_CHECK_FUNCS(socketpair)
BFD_NEED_DECLARATION(malloc)
BFD_NEED_DECLARATION(realloc)
BFD_NEED_DECLARATION(free)
BFD_NEED_DECLARATION(strerror)
BFD_NEED_DECLARATION(strdup)
1999-05-05 16:45:51 +02:00
BFD_NEED_DECLARATION(strstr)
# The following save_state_t checkery is only necessary for HPUX
# versions earlier than 10.20. When those fade from memory, this
# could be expunged. --jsm 1999-03-22
AC_MSG_CHECKING(for HPUX save_state structure)
AC_EGREP_HEADER(save_state_t, machine/save_state.h,
gdb_cv_hpux_savestate=yes, gdb_cv_hpux_savestate=no)
AC_EGREP_HEADER(ss_wide, machine/save_state.h, gdb_cv_hpux_sswide=yes,
gdb_cv_hpux_sswide=no)
if test $gdb_cv_hpux_savestate = yes
then
AC_DEFINE(HAVE_STRUCT_SAVE_STATE_T, 1)
fi
if test $gdb_cv_hpux_sswide = yes
then
AC_DEFINE(HAVE_STRUCT_MEMBER_SS_WIDE, 1)
fi
AC_MSG_RESULT($gdb_cv_hpux_sswide)
# If we are configured native on GNU/Linux, work around problems with
# sys/procfs.h
2000-01-06 04:07:20 +01:00
# Also detect which type of /proc is in use, such as for Unixware or Solaris.
if test "${target}" = "${host}"; then
case "${host}" in
i[[3456]]86-*-linux*)
AC_DEFINE(START_INFERIOR_TRAPS_EXPECTED,2)
AC_DEFINE(sys_quotactl)
;;
2000-01-18 01:55:13 +01:00
*-*-unixware* | *-*-sysv4.2* | *-*-sysv5*)
2000-01-06 04:07:20 +01:00
AC_DEFINE(NEW_PROC_API)
;;
*-*-solaris2.[[678]])
2000-01-06 04:07:20 +01:00
AC_DEFINE(NEW_PROC_API)
;;
esac
fi
if test "$ac_cv_header_sys_procfs_h" = yes; then
BFD_HAVE_SYS_PROCFS_TYPE(pstatus_t)
BFD_HAVE_SYS_PROCFS_TYPE(prrun_t)
BFD_HAVE_SYS_PROCFS_TYPE(gregset_t)
BFD_HAVE_SYS_PROCFS_TYPE(fpregset_t)
BFD_HAVE_SYS_PROCFS_TYPE(prgregset_t)
BFD_HAVE_SYS_PROCFS_TYPE(prfpregset_t)
BFD_HAVE_SYS_PROCFS_TYPE(prgregset32_t)
BFD_HAVE_SYS_PROCFS_TYPE(prfpregset32_t)
BFD_HAVE_SYS_PROCFS_TYPE(lwpid_t)
BFD_HAVE_SYS_PROCFS_TYPE(psaddr_t)
dnl Check for struct link_map32 type, which allows a 64-bit Solaris
dnl debugger to debug a 32-bit Solaris app with 32-bit shared libraries.
AC_MSG_CHECKING(for struct link_map32 in sys/link.h)
AC_CACHE_VAL(gdb_cv_have_struct_link_map32,
[AC_TRY_COMPILE([#define _SYSCALL32
#include <sys/link.h>], [struct link_map32 l;],
gdb_cv_have_struct_link_map32=yes,
gdb_cv_have_struct_link_map32=no)])
AC_MSG_RESULT($gdb_cv_have_struct_link_map32)
if test $gdb_cv_have_struct_link_map32 = yes; then
AC_DEFINE(HAVE_STRUCT_LINK_MAP32)
fi
dnl Check for broken prfpregset_t type
dnl For Linux/i386, glibc 2.1.3 was released with a bogus
dnl prfpregset_t type (it's a typedef for the pointer to a struct
dnl instead of the struct itself). We detect this here, and work
dnl around it in lin-thread.c.
if test $bfd_cv_have_sys_procfs_type_prfpregset_t = yes; then
AC_MSG_CHECKING(whether prfpregset_t type is broken)
AC_CACHE_VAL(gdb_cv_prfpregset_t_broken,
[AC_TRY_RUN([#include <sys/procfs.h>
int main ()
{
if (sizeof (prfpregset_t) == sizeof (void *))
return 1;
return 0;
}],
gdb_cv_prfpregset_t_broken=no,
gdb_cv_prfpregset_t_broken=yes,
gdb_cv_prfpregset_t_broken=yes)])
AC_MSG_RESULT($gdb_cv_prfpregset_t_broken)
if test $gdb_cv_prfpregset_t_broken = yes; then
AC_DEFINE(PRFPREGSET_T_BROKEN)
fi
fi
dnl Check for PIOCSET ioctl entry
AC_MSG_CHECKING(for PIOCSET ioctl entry in sys/procfs.h)
AC_CACHE_VAL(gdb_cv_have_procfs_piocset,
[AC_TRY_COMPILE([#include <unistd.h>
#include <sys/types.h>
#include <sys/procfs.h>
], [
int dummy;;
dummy = ioctl(0, PIOCSET, &dummy);
],
gdb_cv_have_procfs_piocset=yes, gdb_cv_have_procfs_piocset=no)])
AC_MSG_RESULT($gdb_cv_have_procfs_piocset)
if test $gdb_cv_have_procfs_piocset = yes; then
AC_DEFINE(HAVE_PROCFS_PIOCSET)
fi
fi
dnl See if host has libm. This is usually needed by simulators.
AC_CHECK_LIB(m, main)
dnl Solaris puts wctype in /usr/lib/libw.a before Solaris 2.6.
dnl
dnl A bug in GNU ld 2.9.1 causes a problem if we link in -lw
dnl under Solaris 2.6 because it is some funky empty library.
dnl So only link in libw if we have to.
AC_CHECK_LIB(c, wctype,: ,AC_CHECK_LIB(w, wctype))
dnl See if compiler supports "long long" type.
AC_MSG_CHECKING(for long long support in compiler)
AC_CACHE_VAL(gdb_cv_c_long_long,
[AC_TRY_COMPILE(, [
extern long long foo;
switch (foo & 2) { case 0: return 1; }
],
gdb_cv_c_long_long=yes, gdb_cv_c_long_long=no)])
AC_MSG_RESULT($gdb_cv_c_long_long)
if test $gdb_cv_c_long_long = yes; then
AC_DEFINE(CC_HAS_LONG_LONG)
fi
dnl See if the compiler and runtime support printing long long
AC_MSG_CHECKING(for long long support in printf)
AC_CACHE_VAL(gdb_cv_printf_has_long_long,
[AC_TRY_RUN([
int main () {
char buf[32];
long long l = 0;
l = (l << 16) + 0x0123;
l = (l << 16) + 0x4567;
l = (l << 16) + 0x89ab;
l = (l << 16) + 0xcdef;
sprintf (buf, "0x%016llx", l);
return (strcmp ("0x0123456789abcdef", buf));
}],
gdb_cv_printf_has_long_long=yes,
gdb_cv_printf_has_long_long=no,
gdb_cv_printf_has_long_long=no)])
if test $gdb_cv_printf_has_long_long = yes; then
AC_DEFINE(PRINTF_HAS_LONG_LONG)
fi
AC_MSG_RESULT($gdb_cv_printf_has_long_long)
dnl See if compiler supports "long double" type. Can't use AC_C_LONG_DOUBLE
dnl because autoconf complains about cross-compilation issues. However, this
dnl code uses the same variables as the macro for compatibility.
AC_MSG_CHECKING(for long double support in compiler)
AC_CACHE_VAL(ac_cv_c_long_double,
[AC_TRY_COMPILE(, [long double foo;],
ac_cv_c_long_double=yes, ac_cv_c_long_double=no)])
AC_MSG_RESULT($ac_cv_c_long_double)
if test $ac_cv_c_long_double = yes; then
AC_DEFINE(HAVE_LONG_DOUBLE)
fi
dnl See if the compiler and runtime support printing long doubles
AC_MSG_CHECKING(for long double support in printf)
AC_CACHE_VAL(gdb_cv_printf_has_long_double,
[AC_TRY_RUN([
int main () {
char buf[16];
long double f = 3.141592653;
sprintf (buf, "%Lg", f);
return (strncmp ("3.14159", buf, 7));
}],
gdb_cv_printf_has_long_double=yes,
gdb_cv_printf_has_long_double=no,
gdb_cv_printf_has_long_double=no)])
if test $gdb_cv_printf_has_long_double = yes; then
AC_DEFINE(PRINTF_HAS_LONG_DOUBLE)
fi
AC_MSG_RESULT($gdb_cv_printf_has_long_double)
dnl See if the compiler and runtime support scanning long doubles
AC_MSG_CHECKING(for long double support in scanf)
AC_CACHE_VAL(gdb_cv_scanf_has_long_double,
[AC_TRY_RUN([
int main () {
char *buf = "3.141592653";
long double f = 0;
sscanf (buf, "%Lg", &f);
return !(f > 3.14159 && f < 3.14160);
}],
gdb_cv_scanf_has_long_double=yes,
gdb_cv_scanf_has_long_double=no,
gdb_cv_scanf_has_long_double=no)])
if test $gdb_cv_scanf_has_long_double = yes; then
AC_DEFINE(SCANF_HAS_LONG_DOUBLE)
fi
AC_MSG_RESULT($gdb_cv_scanf_has_long_double)
AC_FUNC_MMAP
dnl See if thread_db library is around for Solaris thread debugging. Note that
dnl we must explicitly test for version 1 of the library because version 0
dnl (present on Solaris 2.4 or earlier) doesn't have the same API.
dnl Note that we only want this if we are both native (host == target), and
dnl not doing a canadian cross build (build == host).
if test ${build} = ${host} -a ${host} = ${target} ; then
case ${host_os} in
hpux*)
AC_MSG_CHECKING(for HPUX/OSF thread support)
if test -f /usr/include/dce/cma_config.h ; then
if test "$GCC" = "yes" ; then
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_HPUX_THREAD_SUPPORT)
CONFIG_LIB_OBS="${CONFIG_LIB_OBS} hpux-thread.o"
CONFIG_SRCS="${CONFIG_SRCS} hpux-thread.c"
else
AC_MSG_RESULT(no (suppressed because you are not using GCC))
fi
else
AC_MSG_RESULT(no)
fi
;;
solaris*)
AC_MSG_CHECKING(for Solaris thread debugging library)
if test -f /usr/lib/libthread_db.so.1 ; then
AC_MSG_RESULT(yes)
AC_DEFINE(HAVE_THREAD_DB_LIB)
CONFIG_LIB_OBS="${CONFIG_LIB_OBS} sol-thread.o"
CONFIG_SRCS="${CONFIG_SRCS} sol-thread.c"
AC_CHECK_LIB(dl, dlopen)
if test "$GCC" = "yes" ; then
# The GNU linker requires the -export-dynamic option to make
# all symbols visible in the dynamic symbol table.
hold_ldflags=$LDFLAGS
AC_MSG_CHECKING(for the ld -export-dynamic flag)
LDFLAGS="${LDFLAGS} -Wl,-export-dynamic"
AC_TRY_LINK(, [int i;], found=yes, found=no)
LDFLAGS=$hold_ldflags
AC_MSG_RESULT($found)
if test $found = yes; then
CONFIG_LDFLAGS="${CONFIG_LDFLAGS} -Wl,-export-dynamic"
fi
fi
# Sun randomly tweaked the prototypes in <proc_service.h>
# at one point.
AC_MSG_CHECKING(if <proc_service.h> is old)
AC_CACHE_VAL(gdb_cv_proc_service_is_old,[
AC_TRY_COMPILE([
#include <proc_service.h>
ps_err_e ps_pdwrite
(struct ps_prochandle*, psaddr_t, const void*, size_t);
],, gdb_cv_proc_service_is_old=no,
gdb_cv_proc_service_is_old=yes)
])
AC_MSG_RESULT($gdb_cv_proc_service_is_old)
if test $gdb_cv_proc_service_is_old = yes; then
AC_DEFINE(PROC_SERVICE_IS_OLD)
fi
else
AC_MSG_RESULT(no)
fi
;;
esac
AC_SUBST(CONFIG_LDFLAGS)
fi
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
dnl The CLI cannot be disabled yet, but may be in the future
dnl Handle CLI sub-directory configury.
AC_ARG_ENABLE(gdbcli,
[ --enable-gdbcli Enable GDB-CLI interface],
[
case "${enableval}" in
yes) enable_gdbcli=yes ;;
"") enable_gdbcli=yes ;;
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
no)
AC_MSG_ERROR(The CLI cannot be disabled yet)
;;
*)
AC_MSG_ERROR(Bad value for --enable-gdbcli: ${enableval})
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
;;
esac
],
[enable_gdbcli=yes])
case ${enable_gdbcli} in
"yes" )
if test -d "${srcdir}/cli" ; then
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
CONFIG_OBS="${CONFIG_OBS} \$(SUBDIR_CLI_OBS)"
CONFIG_DEPS="${CONFIG_DEPS} \$(SUBDIR_CLI_DEPS)"
CONFIG_SRCS="${CONFIG_SRCS} \$(SUBDIR_CLI_SRCS)"
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
CONFIG_INITS="${CONFIG_INITS} \$(SUBDIR_CLI_INITS)"
ENABLE_CFLAGS="${ENABLE_CFLAGS} \$(SUBDIR_CLI_CFLAGS)"
CONFIG_ALL="${CONFIG_ALL} \$(SUBDIR_CLI_ALL)"
CONFIG_CLEAN="${CONFIG_CLEAN} \$(SUBDIR_CLI_CLEAN)"
CONFIG_INSTALL="${CONFIG_INSTALL} \$(SUBDIR_CLI_INSTALL)"
CONFIG_UNINSTALL="${CONFIG_UNINSTALL} \$(SUBDIR_CLI_UNINSTALL)"
fi
;;
esac
dnl Handle optional features that can be enabled.
dnl Handle MI sub-directory configury.
AC_ARG_ENABLE(gdbmi,
[ --enable-gdbmi Enable GDB-MI interface],
[
case "${enable_gdbmi}" in
yes | no) ;;
"") enable_gdbmi=yes ;;
*)
AC_MSG_ERROR(Bad value for --enable-gdbmi: ${enableval})
;;
esac
])
case ${enable_gdbmi} in
"yes" )
if test -d "${srcdir}/mi" ; then
CONFIG_OBS="${CONFIG_OBS} \$(SUBDIR_MI_OBS)"
CONFIG_DEPS="${CONFIG_DEPS} \$(SUBDIR_MI_DEPS)"
CONFIG_SRCS="${CONFIG_SRCS} \$(SUBDIR_MI_SRCS)"
CONFIG_INITS="${CONFIG_INITS} \$(SUBDIR_MI_INITS)"
ENABLE_CFLAGS="${ENABLE_CFLAGS} \$(SUBDIR_MI_CFLAGS)"
CONFIG_ALL="${CONFIG_ALL} \$(SUBDIR_MI_ALL)"
CONFIG_CLEAN="${CONFIG_CLEAN} \$(SUBDIR_MI_CLEAN)"
CONFIG_INSTALL="${CONFIG_INSTALL} \$(SUBDIR_MI_INSTALL)"
CONFIG_UNINSTALL="${CONFIG_UNINSTALL} \$(SUBDIR_MI_UNINSTALL)"
fi
;;
esac
# Configure UI_OUT by default (before 5.2 it can be disabled)
# It must be configured if gdbmi is configured
UIOUT_CFLAGS=
AC_SUBST(UIOUT_CFLAGS)
AC_ARG_WITH(uiout,
[ --with-uiout Use new uiout functions intead of *printf's],
[case "${withval}" in
yes) want_uiout=true ;;
no) if test $enable_gdbmi = yes; then
AC_MSG_ERROR(uiout is needed for MI and cannot be disabled)
else
want_uiout=false
fi ;;
*) AC_MSG_ERROR(bad value ${withval} for GDB with-uiout option) ;;
esac],
[want_uiout=true])dnl
if test $want_uiout = true; then
UIOUT_CFLAGS="-DUI_OUT=1"
fi
AC_ARG_ENABLE(tui,
[ --enable-tui Enable full-screen terminal user interface],
[
case "${enable_tui}" in
yes | no) ;;
"") enable_tui=yes ;;
*)
AC_MSG_ERROR(Bad value for --enable-tui: ${enableval})
;;
esac
])
case ${enable_tui} in
"yes" )
if test -d "${srcdir}/tui" ; then
CONFIG_OBS="${CONFIG_OBS} \$(SUBDIR_TUI_OBS)"
CONFIG_DEPS="${CONFIG_DEPS} \$(SUBDIR_TUI_DEPS)"
CONFIG_SRCS="${CONFIG_SRCS} \$(SUBDIR_TUI_SRCS)"
CONFIG_INITS="${CONFIG_INITS} \$(SUBDIR_TUI_INITS)"
ENABLE_CFLAGS="${ENABLE_CFLAGS} \$(SUBDIR_TUI_CFLAGS)"
CONFIG_ALL="${CONFIG_ALL} \$(SUBDIR_TUI_ALL)"
CONFIG_CLEAN="${CONFIG_CLEAN} \$(SUBDIR_TUI_CLEAN)"
CONFIG_INSTALL="${CONFIG_INSTALL} \$(SUBDIR_TUI_INSTALL)"
CONFIG_UNINSTALL="${CONFIG_UNINSTALL} \$(SUBDIR_TUI_UNINSTALL)"
fi
;;
esac
AC_ARG_ENABLE(netrom,
[ --enable-netrom Enable NetROM support],
[case "${enableval}" in
yes) enable_netrom=yes ;;
no) enable_netrom=no ;;
*) AC_MSG_ERROR(bad value ${enableval} given for netrom option) ;;
esac])
if test "${enable_netrom}" = "yes"; then
CONFIG_LIB_OBS="${CONFIG_LIB_OBS} remote-nrom.o"
CONFIG_SRCS="${CONFIG_SRCS} remote-nrom.c"
fi
# NOTE: Don't add -Wall or -Wunused, they both include
# -Wunused-parameter which reports bogus warnings.
# NOTE: If you add to this list, remember to update
# gdb/doc/gdbint.texinfo.
build_warnings="-Wimplicit -Wreturn-type -Wcomment -Wtrigraphs \
2000-05-23 13:28:14 +02:00
-Wformat -Wparentheses -Wpointer-arith -Wuninitialized"
2000-05-17 10:46:20 +02:00
# Up for debate: -Wswitch -Wcomment -trigraphs -Wtrigraphs
# -Wunused-function -Wunused-label -Wunused-variable -Wunused-value
# -Wchar-subscripts -Wuninitialized -Wtraditional -Wshadow -Wcast-qual
# -Wcast-align -Wwrite-strings -Wconversion -Wstrict-prototypes
# -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls
# -Woverloaded-virtual -Winline -Werror"
AC_ARG_ENABLE(build-warnings,
[ --enable-build-warnings Enable build-time compiler warnings if gcc is used],
[case "${enableval}" in
yes) ;;
no) build_warnings="-w";;
,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
build_warnings="${build_warnings} ${t}";;
*,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
build_warnings="${t} ${build_warnings}";;
*) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
1999-09-09 02:02:17 +02:00
esac
if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
2000-05-12 06:37:00 +02:00
echo "Setting compiler warning flags = $build_warnings" 6>&1
fi])dnl
AC_ARG_ENABLE(gdb-build-warnings,
[ --enable-gdb-build-warnings Enable GDB specific build-time compiler warnings if gcc is used],
[case "${enableval}" in
yes) ;;
no) build_warnings="-w";;
,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
build_warnings="${build_warnings} ${t}";;
*,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
build_warnings="${t} ${build_warnings}";;
*) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
echo "Setting GDB specific compiler warning flags = $build_warnings" 6>&1
fi])dnl
1999-08-31 03:14:27 +02:00
WARN_CFLAGS=""
WERROR_CFLAGS=""
if test "x${build_warnings}" != x -a "x$GCC" = xyes
then
2000-05-12 06:37:00 +02:00
AC_MSG_CHECKING(compiler warning flags)
# Separate out the -Werror flag as some files just cannot be
# compiled with it enabled.
for w in ${build_warnings}; do
case $w in
-Werr*) WERROR_CFLAGS=-Werror ;;
*) # Check that GCC accepts it
if $CC $w 2>&1 | grep 'unrecognized option' > /dev/null; then
:
else
WARN_CFLAGS="${WARN_CFLAGS} $w"
fi
esac
done
AC_MSG_RESULT(${WARN_CFLAGS}${WERROR_CFLAGS})
fi
AC_SUBST(WARN_CFLAGS)
1999-08-31 03:14:27 +02:00
AC_SUBST(WERROR_CFLAGS)
MMALLOC_CFLAGS=
MMALLOC=
AC_SUBST(MMALLOC_CFLAGS)
AC_SUBST(MMALLOC)
AC_ARG_WITH(mmalloc,
[ --with-mmalloc Use memory mapped malloc package],
[case "${withval}" in
yes) want_mmalloc=true ;;
no) want_mmalloc=false;;
*) AC_MSG_ERROR(bad value ${withval} for GDB with-mmalloc option) ;;
esac],[want_mmalloc=false])dnl
if test x$want_mmalloc = xtrue; then
AC_DEFINE(USE_MMALLOC)
AC_DEFINE(MMCHECK_FORCE)
MMALLOC_CFLAGS="-I$srcdir/../mmalloc"
MMALLOC='../mmalloc/libmmalloc.a'
fi
AC_ARG_WITH(included-regex,
[ --with-included-regex Use included regex],
[case "${withval}" in
yes) want_included_regex=true ;;
no) want_included_regex=false;;
*) AC_MSG_ERROR(bad value ${withval} for GDB with-included-regex option) ;;
esac],[want_included_regex=true])dnl
if test $want_included_regex = false; then
AC_MSG_CHECKING(for GNU regex)
AC_CACHE_VAL(gdb_cv_have_gnu_regex,
[AC_TRY_COMPILE([#include <gnu-versions.h>
#include <sys/types.h>
#include <regex.h>],
[#if !defined _GNU_REGEX_INTERFACE_VERSION || !defined __GLIBC__ || __GLIBC__ < 2
#error No valid GNU regex.
#endif
],
[gdb_cv_have_gnu_regex=yes],
[gdb_cv_have_gnu_regex=no])])
AC_MSG_RESULT($gdb_cv_have_gnu_regex)
if test $gdb_cv_have_gnu_regex = no; then
want_included_regex=true
fi
fi
if test x${want_included_regex} = xtrue; then
REGEX="gnu-regex.o"
AC_DEFINE(USE_INCLUDED_REGEX)
fi
AC_SUBST(REGEX)
1999-04-26 20:34:20 +02:00
# In the Cygwin environment, we need some additional flags.
AC_CACHE_CHECK([for cygwin], gdb_cv_os_cygwin,
[AC_EGREP_CPP(lose, [
#if defined (__CYGWIN__) || defined (__CYGWIN32__)
lose
#endif],[gdb_cv_os_cygwin=yes],[gdb_cv_os_cygwin=no])])
dnl Figure out which of the many generic ser-*.c files the _host_ supports.
SER_HARDWIRE="ser-unix.o ser-pipe.o ser-tcp.o"
case ${host} in
*go32* ) SER_HARDWIRE=ser-go32.o ;;
*djgpp* ) SER_HARDWIRE=ser-go32.o ;;
esac
AC_SUBST(SER_HARDWIRE)
dnl Figure out which term library to use.
1999-05-05 16:45:51 +02:00
if test x$gdb_host = xgo32; then
TERM_LIB=
else
if test x$gdb_cv_os_cygwin = xyes; then
TERM_LIB='`if test -r ../libtermcap/libtermcap.a; then echo ../libtermcap/libtermcap.a; else echo -ltermcap; fi`'
else
TERM_LIB=
AC_CHECK_LIB(ncurses, tgetent, TERM_LIB=-lncurses,
AC_CHECK_LIB(Hcurses, tgetent, TERM_LIB=-lHcurses,
AC_CHECK_LIB(termlib, tgetent, TERM_LIB=-ltermlib,
AC_CHECK_LIB(termcap, tgetent, TERM_LIB=-ltermcap,
AC_CHECK_LIB(curses, tgetent, TERM_LIB=-lcurses,
AC_CHECK_LIB(terminfo, tgetent, TERM_LIB=-lterminfo))))))
if test "x$TERM_LIB" = x
then
AC_MSG_ERROR(Could not find a term library, e.g. termcap or termlib!)
fi
fi
1999-05-05 16:45:51 +02:00
fi
AC_SUBST(TERM_LIB)
1999-05-11 15:35:55 +02:00
# libreadline needs libuser32.a in a cygwin environment
WIN32LIBS=
if test x$gdb_cv_os_cygwin = xyes; then
2000-01-18 01:55:13 +01:00
WIN32LIBS="-luser32"
case "${target}" in
*cygwin*) WIN32LIBS="$WIN32LIBS -limagehlp"
;;
esac
1999-05-11 15:35:55 +02:00
fi
AC_SUBST(WIN32LIBS)
1999-04-26 20:34:20 +02:00
LIBGUI="../libgui/src/libgui.a"
GUI_CFLAGS_X="-I${srcdir}/../libgui/src"
AC_SUBST(LIBGUI)
AC_SUBST(GUI_CFLAGS_X)
1999-04-26 20:34:20 +02:00
2000-02-03 05:14:45 +01:00
AC_ARG_WITH(cpu,
[ --with-cpu=CPU Set the default CPU variant to debug],
[case "${target}" in
powerpc-* | powerpcle-* )
## It would be nice to keep this table in sync with the one in
## gcc/configure.
case "${with_cpu}" in
ppc-uisa | rs6000 | 403 | 403GC | 505 | 860 | 601 | 602 | 603 \
| 604 | 750 )
## Those are all handled in variants in rs6000-tdep.c, so they're fine.
;;
common | power | power2 | rios | rios1 | rios2 | rsc | rsc1 )
## These are all RS6000 variants, as far as GDB is concerned.
with_cpu=rs6000
;;
603e | ec603e )
with_cpu=603
;;
604e )
with_cpu=604
;;
* )
AC_MSG_WARN(GDB: unknown --with-cpu value: \`${with_cpu}'; using \`ppc-uisa'.)
with_cpu=ppc-uisa
;;
esac
;;
* )
AC_MSG_WARN(GDB may ignore the --with-cpu flag for ${target} targets)
;;
esac
AC_DEFINE_UNQUOTED(TARGET_CPU_DEFAULT, "${with_cpu}")
],)
AC_ARG_ENABLE(gdbtk,
[ --enable-gdbtk Enable GDBTK GUI front end],
[case "${enableval}" in
yes)
case "$host" in
*go32*)
AC_MSG_WARN([GDB does not support GDBtk on host ${host}. GDBtk will be disabled.])
enable_gdbtk=no ;;
*windows*)
AC_MSG_WARN([GDB does not support GDBtk on host ${host}. GDBtk will be disabled.])
enable_gdbtk=no ;;
*)
enable_gdbtk=yes ;;
esac ;;
no)
enable_gdbtk=no ;;
*)
AC_MSG_ERROR(bad value ${enableval} given for gdbtk option) ;;
esac],
[
# Default is on for everything but go32 and Cygwin
case "$host" in
*go32* | *windows*)
;;
*)
if test -d "${srcdir}/gdbtk" ; then
enable_gdbtk=yes
fi
;;
esac
])
WIN32LDAPP=
AC_SUBST(WIN32LIBS)
AC_SUBST(WIN32LDAPP)
configdir="unix"
GDBTKLIBS=
if test "${enable_gdbtk}" = "yes"; then
CY_AC_PATH_TCLCONFIG
if test -z "${no_tcl}"; then
CY_AC_LOAD_TCLCONFIG
CY_AC_PATH_TKCONFIG
# If $no_tk is nonempty, then we can't do Tk, and there is no
# point to doing Tcl.
if test -z "${no_tk}"; then
CY_AC_LOAD_TKCONFIG
CY_AC_PATH_TCLH
CY_AC_PATH_TKH
CY_AC_PATH_ITCLH
CY_AC_PATH_ITKH
CY_AC_PATH_TIXH
# now look for Itcl library stuff
CY_AC_PATH_ITCLCONFIG
if test -z "${no_itcl}"; then
CY_AC_LOAD_ITCLCONFIG
case "${host}" in
*-*-cygwin*)
itcldir=../itcl/itcl/win/
;;
*)
itcldir=../itcl/itcl/unix/
;;
esac
ITCLLIB="${ITCL_BUILD_LIB_SPEC}"
ITCL_DEPS="${itcldir}${ITCL_LIB_FILE}"
fi
# now look for Itk library stuff
CY_AC_PATH_ITKCONFIG
if test -z "${no_itcl}"; then
CY_AC_LOAD_ITKCONFIG
case "${host}" in
*-*-cygwin*)
itkdir=../itcl/itk/win/
;;
*)
itkdir=../itcl/itk/unix/
;;
esac
ITKLIB="${ITK_BUILD_LIB_SPEC}"
ITK_DEPS="${itkdir}${ITK_LIB_FILE}"
fi
# now look for Tix library stuff
CY_AC_PATH_TIXCONFIG
if test -z "${no_tix}"; then
CY_AC_LOAD_TIXCONFIG
TIXLIB="${TIX_BUILD_LIB_SPEC}"
TIX_DEPS="${TIX_BUILD_LOCATION}/${TIX_LIB_FILE}"
fi
ENABLE_CFLAGS="${ENABLE_CFLAGS} \$(SUBDIR_GDBTK_CFLAGS)"
# Tcl/Tk 8.1 require -fwritable strings. I don't
# know whether 8.2 will or not, but I bet it will.
# I don't have to worry about 7.x since we don't support it.
GDBTK_CFLAGS=""
if test "$GCC" = "yes"; then
if test "$TCL_VERSION" != "8.0" ; then
GDBTK_CFLAGS="-fwritable-strings"
fi
fi
# Include some libraries that Tcl and Tk want.
TCL_LIBS='$(LIBGUI) $(ITCL) $(ITK) $(TIX) $(TK) $(TCL) $(X11_LDFLAGS) $(X11_LIBS)'
# Yes, the ordering seems wrong here. But it isn't.
# TK_LIBS is the list of libraries that need to be linked
# after Tcl/Tk. Note that this isn't put into LIBS. If it
# were in LIBS then any link tests after this point would
# try to include things like `$(LIBGUI)', which wouldn't work.
GDBTKLIBS="${TCL_LIBS} ${TK_LIBS}"
CONFIG_OBS="${CONFIG_OBS} \$(SUBDIR_GDBTK_OBS)"
CONFIG_DEPS="${CONFIG_DEPS} \$(SUBDIR_GDBTK_DEPS)"
CONFIG_SRCS="${CONFIG_SRCS} \$(SUBDIR_GDBTK_SRCS)"
CONFIG_INITS="${CONFIG_INITS} \$(SUBDIR_GDBTK_INITS)"
CONFIG_ALL="${CONFIG_ALL} \$(SUBDIR_GDBTK_ALL)"
CONFIG_CLEAN="${CONFIG_CLEAN} \$(SUBDIR_GDBTK_CLEAN)"
CONFIG_INSTALL="${CONFIG_INSTALL} \$(SUBDIR_GDBTK_INSTALL)"
CONFIG_UNINSTALL="${CONFIG_UNINSTALL} \$(SUBDIR_GDBTK_UNINSTALL)"
if test x$gdb_cv_os_cygwin = xyes; then
WIN32LIBS="${WIN32LIBS} -lshell32 -lgdi32 -lcomdlg32 -ladvapi32"
WIN32LDAPP="-Wl,--subsystem,console"
CONFIG_OBS="${CONFIG_OBS} gdbres.o"
fi
fi
fi
fi
AC_SUBST(X_CFLAGS)
AC_SUBST(X_LDFLAGS)
AC_SUBST(X_LIBS)
AC_SUBST(ITCLLIB)
AC_SUBST(ITCL_DEPS)
AC_SUBST(ITKLIB)
AC_SUBST(ITK_DEPS)
AC_SUBST(TIXLIB)
AC_SUBST(TIX_DEPS)
AC_SUBST(GDBTKLIBS)
AC_SUBST(GDBTK_CFLAGS)
2000-02-03 05:14:45 +01:00
AC_PATH_X
1999-04-26 20:34:20 +02:00
# Unlike the sim directory, whether a simulator is linked is controlled by
# presence of a SIM= and a SIM_OBS= definition in the target '.mt' file.
# This code just checks for a few cases where we'd like to ignore those
# definitions, even when they're present in the '.mt' file. These cases
# are when --disable-sim is specified, or if the simulator directory is
# not part of the soruce tree.
#
AC_ARG_ENABLE(sim,
[ --enable-sim Link gdb with simulator],
[echo "enable_sim = $enable_sim";
echo "enableval = ${enableval}";
case "${enableval}" in
yes) ignore_sim=false ;;
no) ignore_sim=true ;;
*) ignore_sim=false ;;
esac],
[ignore_sim=false])
if test ! -d "${srcdir}/../sim"; then
ignore_sim=true
fi
if test "${ignore_sim}" = "true"; then
IGNORE_SIM="SIM="
IGNORE_SIM_OBS="SIM_OBS="
else
IGNORE_SIM=""
IGNORE_SIM_OBS=""
AC_DEFINE(WITH_SIM)
fi
AC_SUBST(IGNORE_SIM)
AC_SUBST(IGNORE_SIM_OBS)
AC_SUBST(ENABLE_CFLAGS)
AC_SUBST(CONFIG_OBS)
AC_SUBST(CONFIG_LIB_OBS)
AC_SUBST(CONFIG_DEPS)
AC_SUBST(CONFIG_SRCS)
2000-02-05 08:30:26 +01:00
AC_SUBST(CONFIG_INITS)
AC_SUBST(CONFIG_ALL)
AC_SUBST(CONFIG_CLEAN)
AC_SUBST(CONFIG_INSTALL)
AC_SUBST(CONFIG_UNINSTALL)
# Begin stuff to support --enable-shared
AC_ARG_ENABLE(shared,
[ --enable-shared Use shared libraries],
[case "${enableval}" in
yes) shared=true ;;
no) shared=false ;;
*) shared=true ;;
esac])dnl
HLDFLAGS=
HLDENV=
# If we have shared libraries, try to set rpath reasonably.
if test "${shared}" = "true"; then
case "${host}" in
*-*-hpux*)
HLDFLAGS='-Wl,+s,+b,$(libdir)'
;;
*-*-irix5* | *-*-irix6*)
HLDFLAGS='-Wl,-rpath,$(libdir)'
;;
*-*-linux*aout*)
;;
*-*-linux* | *-pc-linux-gnu*)
HLDFLAGS='-Wl,-rpath,$(libdir)'
;;
*-*-solaris*)
HLDFLAGS='-R $(libdir)'
;;
*-*-sysv4*)
HLDENV='if test -z "$${LD_RUN_PATH}"; then LD_RUN_PATH=$(libdir); else LD_RUN_PATH=$${LD_RUN_PATH}:$(libdir); fi; export LD_RUN_PATH;'
;;
esac
fi
# On SunOS, if the linker supports the -rpath option, use it to
# prevent ../bfd and ../opcodes from being included in the run time
# search path.
case "${host}" in
*-*-sunos*)
echo 'main () { }' > conftest.c
${CC} -o conftest -Wl,-rpath= conftest.c >/dev/null 2>conftest.t
if grep 'unrecognized' conftest.t >/dev/null 2>&1; then
:
elif grep 'No such file' conftest.t >/dev/null 2>&1; then
:
elif grep 'do not mix' conftest.t >/dev/null 2>&1; then
:
elif grep 'some text already loaded' conftest.t >/dev/null 2>&1; then
:
elif test "${shared}" = "true"; then
HLDFLAGS='-Wl,-rpath=$(libdir)'
else
HLDFLAGS='-Wl,-rpath='
fi
rm -f conftest.t conftest.c conftest
;;
esac
AC_SUBST(HLDFLAGS)
AC_SUBST(HLDENV)
# End stuff to support --enable-shared
# target_subdir is used by the testsuite to find the target libraries.
target_subdir=
if test "${host}" != "${target}"; then
target_subdir="${target_alias}/"
fi
AC_SUBST(target_subdir)
frags=
host_makefile_frag=${srcdir}/config/${gdb_host_cpu}/${gdb_host}.mh
if test ! -f ${host_makefile_frag}; then
AC_MSG_ERROR("*** Gdb does not support host ${host}")
fi
frags="$frags $host_makefile_frag"
target_makefile_frag=${srcdir}/config/${gdb_target_cpu}/${gdb_target}.mt
if test ! -f ${target_makefile_frag}; then
AC_MSG_ERROR("*** Gdb does not support target ${target}")
fi
frags="$frags $target_makefile_frag"
AC_SUBST_FILE(host_makefile_frag)
AC_SUBST_FILE(target_makefile_frag)
AC_SUBST(frags)
changequote(,)dnl
hostfile=`sed -n '
s/XM_FILE[ ]*=[ ]*\([^ ]*\)/\1/p
' ${host_makefile_frag}`
targetfile=`sed -n '
s/TM_FILE[ ]*=[ ]*\([^ ]*\)/\1/p
' ${target_makefile_frag}`
GDB_MULTI_ARCH=`sed -n '
s/GDB_MULTI_ARCH[ ]*=[ ]*\([^ ]*\)[ ]*/\1/p
' ${target_makefile_frag}`
# these really aren't orthogonal true/false values of the same condition,
# but shells are slow enough that I like to reuse the test conditions
# whenever possible
if test "${target}" = "${host}"; then
nativefile=`sed -n '
s/NAT_FILE[ ]*=[ ]*\([^ ]*\)/\1/p
' ${host_makefile_frag}`
# else
# GDBserver is only useful in a "native" enviroment
# configdirs=`echo $configdirs | sed 's/gdbserver//'`
fi
changequote([,])
# New targets should just set gdb_multi_arch=yes in configure.tgt.
# Old targets being converted can either do that or set GDB_MULTI_ARCH
# in the target specific makefile frag. Eventually gdb_multi_arch=yes
# will be the default.
if test x"${GDB_MULTI_ARCH}" = x ; then
case "${gdb_multi_arch}" in
yes ) GDB_MULTI_ARCH=GDB_MULTI_ARCH_PURE ;;
no ) GDB_MULTI_ARCH=0 ;;
0|1|2 ) GDB_MULTI_ARCH=${gdb_multi_arch} ;;
esac
fi
if test x"${GDB_MULTI_ARCH}" != x ; then
AC_DEFINE_UNQUOTED(GDB_MULTI_ARCH, ${GDB_MULTI_ARCH})
fi
# Warn the user when they use an old pratice
case "${GDB_MULTI_ARCH}" in
"" ) ;;
0 | GDB_MULTI_ARCH_PARTIAL | 1 | GDB_MULTI_ARCH_TM | 2 )
AC_MSG_WARN("GDB: Target is not pure multi-arch") ;;
GDB_MULTI_ARCH_PURE )
if test x"${targetfile}" != x ; then
AC_MSG_WARN("GDB: Ingoring TM_FILE in ${target_makefile_frag}")
targetfile=""
fi ;;
*) AC_MSG_ERROR("GDB: Unknown GDB_MULTI_ARCH value ${GDB_MULTI_ARCH}");;
esac
1999-08-09 23:36:23 +02:00
SUBDIRS="doc testsuite nlm"
if test "${enable_multi_ice}" = "yes"; then
SUBDIRS="${SUBDIRS} multi-ice"
fi
AC_SUBST(SUBDIRS)
# If hostfile (XM_FILE) and/or targetfile (TM_FILE) and/or nativefile
# (NAT_FILE) is not set in config/*/*.m[ht] files, we link to an empty
# version.
files=
links=
rm -f xm.h
xm_h=""
if test "${hostfile}" != ""; then
xm_h=xm.h
GDB_XM_FILE="config/${gdb_host_cpu}/${hostfile}"
files="${files} ${GDB_XM_FILE}"
links="${links} xm.h"
AC_DEFINE_UNQUOTED(GDB_XM_FILE, ${GDB_XM_FILE})
fi
AC_SUBST(xm_h)
rm -f tm.h
tm_h=""
if test "${targetfile}" != ""; then
tm_h=tm.h
GDB_TM_FILE="config/${gdb_target_cpu}/${targetfile}"
files="${files} ${GDB_TM_FILE}"
links="${links} tm.h"
AC_DEFINE_UNQUOTED(GDB_TM_FILE, ${GDB_TM_FILE})
fi
AC_SUBST(tm_h)
rm -f nm.h
nm_h=""
if test "${nativefile}" != ""; then
nm_h=nm.h
GDB_NM_FILE="config/${gdb_host_cpu}/${nativefile}"
files="${files} ${GDB_NM_FILE}"
links="${links} nm.h"
AC_DEFINE_UNQUOTED(GDB_NM_FILE, ${GDB_NM_FILE})
fi
AC_SUBST(nm_h)
AC_PROG_LN_S
AC_LINK_FILES($files, $links)
dnl Check for exe extension set on certain hosts (e.g. Win32)
AC_EXEEXT
AC_CONFIG_SUBDIRS($configdirs)
AC_OUTPUT(Makefile .gdbinit:gdbinit.in,
[
dnl Autoconf doesn't provide a mechanism for modifying definitions
dnl provided by makefile fragments.
dnl
if test "${nativefile}" = ""; then
sed -e '/^NATDEPFILES[[ ]]*=[[ ]]*/s//# NATDEPFILES=/' \
< Makefile > Makefile.tem
mv -f Makefile.tem Makefile
fi
changequote(,)dnl
sed -e '/^TM_FILE[ ]*=/s,^TM_FILE[ ]*=[ ]*,&config/'"${gdb_target_cpu}"'/,
/^XM_FILE[ ]*=/s,^XM_FILE[ ]*=[ ]*,&config/'"${gdb_host_cpu}"'/,
/^NAT_FILE[ ]*=/s,^NAT_FILE[ ]*=[ ]*,&config/'"${gdb_host_cpu}"'/,' <Makefile >Makefile.tmp
mv -f Makefile.tmp Makefile
changequote([,])dnl
1999-10-06 01:13:56 +02:00
case x$CONFIG_HEADERS in
xconfig.h:config.in)
echo > stamp-h ;;
esac
],
[
gdb_host_cpu=$gdb_host_cpu
gdb_target_cpu=$gdb_target_cpu
nativefile=$nativefile
])
exit 0