binutils-gdb/gdb/arch-utils.c

898 lines
24 KiB
C
Raw Normal View History

/* Dynamic architecture support for GDB, the GNU debugger.
Copyright (C) 1998-2015 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "arch-utils.h"
#include "buildsym.h"
#include "gdbcmd.h"
#include "inferior.h" /* enum CALL_DUMMY_LOCATION et al. */
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 13:29:11 +02:00
#include "infrun.h"
2001-04-19 02:37:24 +02:00
#include "regcache.h"
#include "sim-regno.h"
#include "gdbcore.h"
#include "osabi.h"
#include "target-descriptions.h"
Implement displaced stepping. gdb/ * gdbarch.sh (max_insn_length): New 'variable'. (displaced_step_copy, displaced_step_fixup) (displaced_step_free_closure, displaced_step_location): New functions. (struct displaced_step_closure): Add forward declaration. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c: #include "objfiles.h". (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New functions. * arch-utils.h (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New prototypes. * i386-tdep.c (I386_MAX_INSN_LEN): Rename to... (I386_MAX_MATCHED_INSN_LEN): ... this. (i386_absolute_jmp_p, i386_absolute_call_p) (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p) (i386_displaced_step_fixup): New functions. (struct i386_insn, i386_match_insn): Update. (i386_gdbarch_init): Set gdbarch_max_insn_length. * i386-tdep.h (I386_MAX_INSN_LEN): New. (i386_displaced_step_fixup): New prototype. * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h". Register gdbarch_displaced_step_copy, gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure, and gdbarch_displaced_step_location functions. * infrun.c (debug_displaced): New variable. (show_debug_displaced): New function. (struct displaced_step_request): New struct. (displaced_step_request_queue, displaced_step_ptid) (displaced_step_gdbarch, displaced_step_closure) (displaced_step_original, displaced_step_copy) (displaced_step_saved_copy, can_use_displaced_stepping): New variables. (show_can_use_displaced_stepping, use_displaced_stepping) (displaced_step_clear, cleanup_displaced_step_closure) (displaced_step_dump_bytes, displaced_step_prepare) (displaced_step_clear_cleanup, write_memory_ptid) (displaced_step_fixup): New functions. (resume): Call displaced_step_prepare. (proceed): Call read_pc once, and remember the value. If using displaced stepping, don't remove breakpoints. (handle_inferior_event): Call displaced_step_fixup. Add some debugging output. When we try to step over a breakpoint, but get a signal to deliver to the thread instead, ensure the step-resume breakpoint is actually inserted. If a thread hop is needed, and displaced stepping is enabled, don't remove breakpoints. (init_wait_for_inferior): Call displaced_step_clear. (_initialize_infrun): Add "set debug displaced" command. Add "maint set can-use-displaced-stepping" command. Clear displaced_step_ptid. * inferior.h (debug_displaced): Declare variable. (displaced_step_dump_bytes): Declare function. * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update dependencies. gdb/testsuite/ * gdb.asm/asmsrc1.s: Add scratch space. gdb/doc/ * gdb.texinfo (Debugging Output): Document "set/show debug displaced". (Maintenance Commands): Document "maint set/show can-use-displaced-stepping".
2008-05-02 18:49:54 +02:00
#include "objfiles.h"
#include "language.h"
MIPS: Keep the ISA bit in compressed code addresses 1. Background information The MIPS architecture, as originally designed and implemented in mid-1980s has a uniform instruction word size that is 4 bytes, naturally aligned. As such all MIPS instructions are located at addresses that have their bits #1 and #0 set to zeroes, and any attempt to execute an instruction from an address that has any of the two bits set to one causes an address error exception. This may for example happen when a jump-register instruction is executed whose register value used as the jump target has any of these bits set. Then in mid 1990s LSI sought a way to improve code density for their TinyRISC family of MIPS cores and invented an alternatively encoded instruction set in a joint effort with MIPS Technologies (then a subsidiary of SGI). The new instruction set has been named the MIPS16 ASE (Application-Specific Extension) and uses a variable instruction word size, which is 2 bytes (as the name of the ASE suggests) for most, but there are a couple of exceptions that take 4 bytes, and then most of the 2-byte instructions can be treated with a 2-byte extension prefix to expand the range of the immediate operands used. As a result instructions are no longer 4-byte aligned, instead they are aligned to a multiple of 2. That left the bit #0 still unused for code references, be it for the standard MIPS (i.e. as originally invented) or for the MIPS16 instruction set, and based on that observation a clever trick was invented that on one hand allowed the processor to be seamlessly switched between the two instruction sets at any time at the run time while on the other avoided the introduction of any special control register to do that. So it is the bit #0 of the instruction address that was chosen as the selector and named the ISA bit. Any instruction executed at an even address is interpreted as a standard MIPS instruction (the address still has to have its bit #1 clear), any instruction executed at an odd address is interpreted as a MIPS16 instruction. To switch between modes ordinary jump instructions are used, such as used for function calls and returns, specifically the bit #0 of the source register used in jump-register instructions selects the execution (ISA) mode for the following piece of code to be interpreted in. Additionally new jump-immediate instructions were added that flipped the ISA bit to select the opposite mode upon execution. They were considered necessary to avoid the need to make register jumps in all cases as the original jump-immediate instructions provided no way to change the bit #0 at all. This was all important for cases where standard MIPS and MIPS16 code had to be mixed, either for compatibility with the existing binary code base or to access resources not reachable from MIPS16 code (the MIPS16 instruction set only provides access to general-purpose registers, and not for example floating-point unit registers or privileged coprocessor 0 registers) -- pieces of code in the opposite mode can be executed as ordinary subroutine calls. A similar approach has been more recently adopted for the MIPS16 replacement instruction set defined as the so called microMIPS ASE. This is another instruction set encoding introduced to the MIPS architecture. Just like the MIPS16 ASE, the microMIPS instruction set uses a variable-length encoding, where each instruction takes a multiple of 2 bytes. The ISA bit has been reused and for microMIPS-capable processors selects between the standard MIPS and the microMIPS mode instead. 2. Statement of the problem To put it shortly, MIPS16 and microMIPS code pointers used by GDB are different to these observed at the run time. This results in the same expressions being evaluated producing different results in GDB and in the program being debugged. Obviously it's the results obtained at the run time that are correct (they define how the program behaves) and therefore by definition the results obtained in GDB are incorrect. A bit longer description will record that obviously at the run time the ISA bit has to be set correctly (refer to background information above if unsure why so) or the program will not run as expected. This is recorded in all the executable file structures used at the run time: the dynamic symbol table (but not always the static one!), the GOT, and obviously in all the addresses embedded in code or data of the program itself, calculated by applying the appropriate relocations at the static link time. While a program is being processed by GDB, the ISA bit is stripped off from any code addresses, presumably to make them the same as the respective raw memory byte address used by the processor to access the instruction in the instruction fetch access cycle. This stripping is actually performed outside GDB proper, in BFD, specifically _bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at the very bottom of that function, starting with an: "If this is an odd-valued function symbol, assume it's a MIPS16 or microMIPS one." comment). This function is also responsible for symbol table dumps made by `objdump' too, so you'll never see the ISA bit reported there by that tool, you need to use `readelf'. This is however unlike what is ever done at the run time, the ISA bit once present is never stripped off, for example a cast like this: (short *) main will not strip the ISA bit off and if the resulting pointer is intended to be used to access instructions as data, for example for software instruction decoding (like for fault recovery or emulation in a signal handler) or for self-modifying code then the bit still has to be stripped off by an explicit AND operation. This is probably best illustrated with a simple real program example. Let's consider the following simple program: $ cat foobar.c int __attribute__ ((mips16)) foo (void) { return 1; } int __attribute__ ((mips16)) bar (void) { return 2; } int __attribute__ ((nomips16)) foo32 (void) { return 3; } int (*foo32p) (void) = foo32; int (*foop) (void) = foo; int fooi = (int) foo; int main (void) { return foop (); } $ This is plain C with no odd tricks, except from the instruction mode attributes. They are not necessary to trigger this problem, I just put them here so that the program can be contained in a single source file and to make it obvious which function is MIPS16 code and which is not. Let's try it with Linux, so that everyone can repeat this experiment: $ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c $ Let's have a look at some interesting symbols: $ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar' Symbol table '.dynsym' contains 7 entries: Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar 68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p 70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop 78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32 80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo 88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi $ Hmm, no sight of the ISA bit, but notice how foo and bar (but not foo32!) have been marked as MIPS16 functions (ELF symbol structure's `st_other' field is used for that). So let's try to run and poke at this program with GDB. I'll be using a native system for simplicity (I'll be using ellipses here and there to remove unrelated clutter): $ ./foobar $ echo $? 1 $ So far, so good. $ gdb ./foobar [...] (gdb) break main Breakpoint 1 at 0x400490: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Yay, it worked! OK, so let's poke at it: (gdb) print main $1 = {int (void)} 0x400490 <main> (gdb) print foo32 $2 = {int (void)} 0x400684 <foo32> (gdb) print foo32p $3 = (int (*)(void)) 0x400684 <foo32> (gdb) print bar $4 = {int (void)} 0x40068c <bar> (gdb) print foo $5 = {int (void)} 0x400680 <foo> (gdb) print foop $6 = (int (*)(void)) 0x400681 <foo> (gdb) A-ha! Here's the difference and finally the ISA bit! (gdb) print /x fooi $7 = 0x400681 (gdb) p/x $pc p/x $pc $8 = 0x400491 (gdb) And here as well... (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 main () at foobar.c:24 24 } Value returned is $9 = 1 (gdb) continue Continuing. [Inferior 1 (process 14103) exited with code 01] (gdb) So let's be a bit inquisitive... (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Actually we do not like to run foo here at all. Let's run bar instead! (gdb) set foop = bar (gdb) print foop $10 = (int (*)(void)) 0x40068c <bar> (gdb) Hmm, no ISA bit. Is it going to work? (gdb) advance bar bar () at foobar.c:9 9 } (gdb) p/x $pc $11 = 0x40068c (gdb) disassemble Dump of assembler code for function bar: => 0x0040068c <+0>: jr ra 0x0040068e <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 Program received signal SIGILL, Illegal instruction. bar () at foobar.c:9 9 } (gdb) Oops! (gdb) p/x $pc $12 = 0x40068c (gdb) We're still there! (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) So let's try something else: (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: => 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 Program received signal SIGILL, Illegal instruction. foo () at foobar.c:4 4 } (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) The same problem! (gdb) run Starting program: /net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo32 (gdb) advance foo32 foo32 () at foobar.c:14 14 } (gdb) disassemble Dump of assembler code for function foo32: => 0x00400684 <+0>: jr ra 0x00400688 <+4>: li v0,3 End of assembler dump. (gdb) finish Run till exit from #0 foo32 () at foobar.c:14 main () at foobar.c:24 24 } Value returned is $14 = 3 (gdb) continue Continuing. [Inferior 1 (process 14113) exited with code 03] (gdb) That did work though, so it's the ISA bit only! (gdb) quit Enough! That's the tip of the iceberg only though. So let's rebuild the executable with some dynamic symbols: $ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c $ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar' Symbol table '.dynsym' contains 32 entries: 6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi $ OK, now the ISA bit is there for a change, but the MIPS16 `st_other' attribute gone, hmm... What does `objdump' do then: $ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar' foobar-dyn: file format elf32-tradbigmips SYMBOL TABLE: 00000000 l df *ABS* 00000000 foobar.c 004009cc g F .text 00000004 0xf0 bar 00410b88 g O .data 00000004 foo32p 00410b84 g O .data 00000004 foop 004009c4 g F .text 00000008 foo32 004009c0 g F .text 00000004 0xf0 foo 00410b80 g O .data 00000004 fooi DYNAMIC SYMBOL TABLE: 004009cc g DF .text 00000004 Base 0xf0 bar 00410b88 g DO .data 00000004 Base foo32p 00410b84 g DO .data 00000004 Base foop 004009c4 g DF .text 00000008 Base foo32 004009c0 g DF .text 00000004 Base 0xf0 foo 00410b80 g DO .data 00000004 Base fooi $ Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone again. Let's have a look at some DWARF-2 records GDB uses (I'll be stripping off a lot here for brevity) -- debug info: $ mips-linux-gnu-readelf -wi foobar Contents of the .debug_info section: [...] Compilation Unit @ offset 0x88: Length: 0xbb (32-bit) Version: 4 Abbrev Offset: 62 Pointer Size: 4 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit) <94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2 <98> DW_AT_language : 1 (ANSI C) <99> DW_AT_name : (indirect string, offset: 0x190): foobar.c <9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...] <a1> DW_AT_ranges : 0x0 <a5> DW_AT_low_pc : 0x0 <a9> DW_AT_stmt_list : 0x27 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram) <ae> DW_AT_external : 1 <ae> DW_AT_name : foo <b2> DW_AT_decl_file : 1 <b3> DW_AT_decl_line : 1 <b4> DW_AT_prototyped : 1 <b4> DW_AT_type : <0xc2> <b8> DW_AT_low_pc : 0x400680 <bc> DW_AT_high_pc : 0x400684 <c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <c2> DW_AT_GNU_all_call_sites: 1 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type) <c3> DW_AT_byte_size : 4 <c4> DW_AT_encoding : 5 (signed) <c5> DW_AT_name : int <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram) <ca> DW_AT_external : 1 <ca> DW_AT_name : (indirect string, offset: 0x18a): foo32 <ce> DW_AT_decl_file : 1 <cf> DW_AT_decl_line : 11 <d0> DW_AT_prototyped : 1 <d0> DW_AT_type : <0xc2> <d4> DW_AT_low_pc : 0x400684 <d8> DW_AT_high_pc : 0x40068c <dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <de> DW_AT_GNU_all_call_sites: 1 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram) <df> DW_AT_external : 1 <df> DW_AT_name : bar <e3> DW_AT_decl_file : 1 <e4> DW_AT_decl_line : 6 <e5> DW_AT_prototyped : 1 <e5> DW_AT_type : <0xc2> <e9> DW_AT_low_pc : 0x40068c <ed> DW_AT_high_pc : 0x400690 <f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <f3> DW_AT_GNU_all_call_sites: 1 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram) <f4> DW_AT_external : 1 <f4> DW_AT_name : (indirect string, offset: 0x199): main <f8> DW_AT_decl_file : 1 <f9> DW_AT_decl_line : 21 <fa> DW_AT_prototyped : 1 <fa> DW_AT_type : <0xc2> <fe> DW_AT_low_pc : 0x400490 <102> DW_AT_high_pc : 0x4004a4 <106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <108> DW_AT_GNU_all_tail_call_sites: 1 [...] $ -- no sign of the ISA bit anywhere -- frame info: $ mips-linux-gnu-readelf -wf foobar [...] Contents of the .debug_frame section: 00000000 0000000c ffffffff CIE Version: 1 Augmentation: "" Code alignment factor: 1 Data alignment factor: -4 Return address column: 31 DW_CFA_def_cfa_register: r29 DW_CFA_nop 00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684 00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c 00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690 00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4 DW_CFA_advance_loc: 6 to 00400496 DW_CFA_def_cfa_offset: 32 DW_CFA_offset: r31 at cfa-4 DW_CFA_advance_loc: 6 to 0040049c DW_CFA_restore: r31 DW_CFA_def_cfa_offset: 0 DW_CFA_nop DW_CFA_nop DW_CFA_nop [...] $ -- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange): $ mips-linux-gnu-readelf -wR foobar Contents of the .debug_ranges section: Offset Begin End 00000000 00400680 00400690 00000000 00400490 004004a4 00000000 <End of list> $ -- no sign of the ISA bit anywhere -- line info: $ mips-linux-gnu-readelf -wl foobar Raw dump of debug contents of section .debug_line: [...] Offset: 0x27 Length: 78 DWARF Version: 2 Prologue Length: 31 Minimum Instruction Length: 1 Initial value of 'is_stmt': 1 Line Base: -5 Line Range: 14 Opcode Base: 13 Opcodes: Opcode 1 has 0 args Opcode 2 has 1 args Opcode 3 has 1 args Opcode 4 has 1 args Opcode 5 has 1 args Opcode 6 has 0 args Opcode 7 has 0 args Opcode 8 has 0 args Opcode 9 has 1 args Opcode 10 has 0 args Opcode 11 has 0 args Opcode 12 has 1 args The Directory Table is empty. The File Name Table: Entry Dir Time Size Name 1 0 0 0 foobar.c Line Number Statements: Extended opcode 2: set Address to 0x400681 Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2 Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4 Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12 Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14 Advance Line by -7 to 7 Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7 Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9 Advance PC by 3 to 0x400690 Extended opcode 1: End of Sequence Extended opcode 2: set Address to 0x400491 Advance Line by 21 to 22 Copy Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23 Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22 Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23 Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24 Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23 Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24 Advance PC by 7 to 0x4004a4 Extended opcode 1: End of Sequence [...] -- a-ha, the ISA bit is there! However it's not always right for some reason, I don't have a small test case to show it, but here's an excerpt from MIPS16 libc, a prologue of a function: 00019630 <__libc_init_first>: 19630: e8a0 jrc ra 19632: 6500 nop 00019634 <_init>: 19634: f000 6a11 li v0,17 19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54> 1963c: f400 3240 sll v0,16 19640: e269 addu v0,v1 19642: 659a move gp,v0 19644: 64f6 save 48,ra,s0-s1 19646: 671c move s0,gp 19648: d204 sw v0,16(sp) 1964a: f352 984c lw v0,-27828(s0) 1964e: 6724 move s1,a0 and the corresponding DWARF-2 line info: Line Number Statements: Extended opcode 2: set Address to 0x19631 Advance Line by 44 to 45 Copy Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48 Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53 Advance PC by constant 17 to 0x19646 Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53 Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53 -- see that "Advance PC by constant 17" there? It clears the ISA bit, however code at 0x19646 is not standard MIPS code at all. For some reason the constant is always 17, I've never seen DW_LNS_const_add_pc used with any other value -- is that a binutils bug or what? 3. Solution: I think we should retain the value of the ISA bit in code references, that is effectively treat them as cookies as they indeed are (although trivially calculated) rather than raw memory byte addresses. In a perfect world both the static symbol table and the respective DWARF-2 records should be fixed to include the ISA bit in all the cases. I think however that this is infeasible. All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be tracked down. This function is used by `elf_slurp_symbol_table' that in turn is used by `bfd_canonicalize_symtab' and `bfd_canonicalize_dynamic_symtab', which are public interfaces. Similarly DWARF-2 records are used outside GDB, one notable if a bit questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have identified at least bits in `execute_cfa_program' and `uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame', that would need an update as they effectively flip the ISA bit freely; see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h. But there may be more places. Any change in how DWARF-2 records are produced would require an update there and would cause compatibility problems with libgcc.a binaries already distributed; given that this is a static library a complex change involving function renames would likely be required. I propose therefore to accept the existing inconsistencies and deal with them entirely within GDB. I have figured out that the ISA bit lost in various places can still be recovered as long as we have symbol information -- that'll have the `st_other' attribute correctly set to one of standard MIPS/MIPS16/microMIPS encoding. Here's the resulting change. It adds a couple of new `gdbarch' hooks, one to update symbol information with the ISA bit lost in `_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2 records as they're processed. The ISA bit is set in each address handled according to information retrieved from the symbol table for the symbol spanning the address if any; limits are adjusted based on the address they point to related to the respective base address. Additionally minimal symbol information has to be adjusted accordingly in its gdbarch hook. With these changes in place some complications with ISA bit juggling in the PC that never fully worked can be removed from the MIPS backend. Conversely, the generic dynamic linker event special breakpoint symbol handler has to be updated to call the minimal symbol gdbarch hook to record that the symbol is a MIPS16 or microMIPS address if applicable or the breakpoint will be set at the wrong address and either fail to work or cause SIGTRAPs (this is because the symbol is handled early on and bypasses regular symbol processing). 4. Results obtained The change fixes the example above -- to repeat only the crucial steps: (gdb) break main Breakpoint 1 at 0x400491: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) print foo $1 = {int (void)} 0x400681 <foo> (gdb) set foop = bar (gdb) advance bar bar () at foobar.c:9 9 } (gdb) disassemble Dump of assembler code for function bar: => 0x0040068d <+0>: jr ra 0x0040068f <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 main () at foobar.c:24 24 } Value returned is $2 = 2 (gdb) continue Continuing. [Inferior 1 (process 14128) exited with code 02] (gdb) -- excellent! The change removes about 90 failures per MIPS16 multilib in mips-sde-elf testing too, results for MIPS16 are now similar to that for standard MIPS; microMIPS results are a bit worse because of host-I/O problems in QEMU used instead of MIPSsim for microMIPS testing only: === gdb Summary === # of expected passes 14299 # of unexpected failures 187 # of expected failures 56 # of known failures 58 # of unresolved testcases 11 # of untested testcases 52 # of unsupported tests 174 MIPS16: === gdb Summary === # of expected passes 14298 # of unexpected failures 187 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 12 # of untested testcases 52 # of unsupported tests 174 microMIPS: === gdb Summary === # of expected passes 14149 # of unexpected failures 201 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 7 # of untested testcases 53 # of unsupported tests 175 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> Maciej W. Rozycki <macro@mips.com> Pedro Alves <pedro@codesourcery.com> gdb/ * gdbarch.sh (elf_make_msymbol_special): Change type to `F', remove `predefault' and `invalid_p' initializers. (make_symbol_special): New architecture method. (adjust_dwarf2_addr, adjust_dwarf2_line): Likewise. (objfile, symbol): New declarations. * arch-utils.h (default_elf_make_msymbol_special): Remove prototype. (default_make_symbol_special): New prototype. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * mips-tdep.h (mips_unmake_compact_addr): New prototype. * arch-utils.c (default_elf_make_msymbol_special): Remove function. (default_make_symbol_special): New function. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * dwarf2-frame.c (decode_frame_entry_1): Call `gdbarch_adjust_dwarf2_addr'. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. Call `gdbarch_make_symbol_special'. (read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'. (read_call_site_scope): Likewise. (dwarf2_ranges_read): Likewise. (dwarf2_record_block_ranges): Likewise. (read_attribute_value): Likewise. (dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'. (new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'. * elfread.c (elf_symtab_read): Don't call `gdbarch_elf_make_msymbol_special' if unset. * mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip the ISA bit from the PC. * mips-tdep.c (mips_unmake_compact_addr): New function. (mips_elf_make_msymbol_special): Set the ISA bit in the symbol's address appropriately. (mips_make_symbol_special): New function. (mips_pc_is_mips): Set the ISA bit before symbol lookup. (mips_pc_is_mips16): Likewise. (mips_pc_is_micromips): Likewise. (mips_pc_isa): Likewise. (mips_adjust_dwarf2_addr): New function. (mips_adjust_dwarf2_line): Likewise. (mips_read_pc, mips_unwind_pc): Keep the ISA bit. (mips_addr_bits_remove): Likewise. (mips_skip_trampoline_code): Likewise. (mips_write_pc): Don't set the ISA bit. (mips_eabi_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. (mips_gdbarch_init): Install `mips_make_symbol_special', `mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch handlers. * solib.c (gdb_bfd_lookup_symbol_from_symtab): Get target-specific symbol address adjustments. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> gdb/testsuite/ * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file.
2014-12-12 14:31:53 +01:00
#include "symtab.h"
#include "version.h"
#include "floatformat.h"
Implement displaced stepping. gdb/ * gdbarch.sh (max_insn_length): New 'variable'. (displaced_step_copy, displaced_step_fixup) (displaced_step_free_closure, displaced_step_location): New functions. (struct displaced_step_closure): Add forward declaration. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c: #include "objfiles.h". (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New functions. * arch-utils.h (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New prototypes. * i386-tdep.c (I386_MAX_INSN_LEN): Rename to... (I386_MAX_MATCHED_INSN_LEN): ... this. (i386_absolute_jmp_p, i386_absolute_call_p) (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p) (i386_displaced_step_fixup): New functions. (struct i386_insn, i386_match_insn): Update. (i386_gdbarch_init): Set gdbarch_max_insn_length. * i386-tdep.h (I386_MAX_INSN_LEN): New. (i386_displaced_step_fixup): New prototype. * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h". Register gdbarch_displaced_step_copy, gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure, and gdbarch_displaced_step_location functions. * infrun.c (debug_displaced): New variable. (show_debug_displaced): New function. (struct displaced_step_request): New struct. (displaced_step_request_queue, displaced_step_ptid) (displaced_step_gdbarch, displaced_step_closure) (displaced_step_original, displaced_step_copy) (displaced_step_saved_copy, can_use_displaced_stepping): New variables. (show_can_use_displaced_stepping, use_displaced_stepping) (displaced_step_clear, cleanup_displaced_step_closure) (displaced_step_dump_bytes, displaced_step_prepare) (displaced_step_clear_cleanup, write_memory_ptid) (displaced_step_fixup): New functions. (resume): Call displaced_step_prepare. (proceed): Call read_pc once, and remember the value. If using displaced stepping, don't remove breakpoints. (handle_inferior_event): Call displaced_step_fixup. Add some debugging output. When we try to step over a breakpoint, but get a signal to deliver to the thread instead, ensure the step-resume breakpoint is actually inserted. If a thread hop is needed, and displaced stepping is enabled, don't remove breakpoints. (init_wait_for_inferior): Call displaced_step_clear. (_initialize_infrun): Add "set debug displaced" command. Add "maint set can-use-displaced-stepping" command. Clear displaced_step_ptid. * inferior.h (debug_displaced): Declare variable. (displaced_step_dump_bytes): Declare function. * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update dependencies. gdb/testsuite/ * gdb.asm/asmsrc1.s: Add scratch space. gdb/doc/ * gdb.texinfo (Debugging Output): Document "set/show debug displaced". (Maintenance Commands): Document "maint set/show can-use-displaced-stepping".
2008-05-02 18:49:54 +02:00
struct displaced_step_closure *
simple_displaced_step_copy_insn (struct gdbarch *gdbarch,
CORE_ADDR from, CORE_ADDR to,
struct regcache *regs)
{
size_t len = gdbarch_max_insn_length (gdbarch);
gdb_byte *buf = xmalloc (len);
read_memory (from, buf, len);
write_memory (to, buf, len);
if (debug_displaced)
{
* defs.h (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter. * utils.c (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter, use it instead of current_gdbarch. * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter. * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter, use it instead of current_gdbarch. Update calls to ui_out_field_core_addr to pass architecture: * ada-lang.c (print_one_exception): Update. * breakpoint.c (print_one_breakpoint_location, print_one_exception_catchpoint): Update. * disasm.c (dump_insns): Update. * darwin-nat-info.c (darwin_debug_regions_recurse): Update. * mi/mi-main.c (mi_cmd_data_read_memory): Update. * mi/mi-symbol-cmds.c: Include "objfiles.h". (mi_cmd_symbol_list_lines): Update. * stack.c (print_frame_info, print_frame): Update. Update callers of paddress to pass architecture: * ada-tasks.c (info_task): Update. * ada-valprint.c (ada_val_print_1): Update. * annotate.c (annotate_source, annotate_frame_begin): Update. * breakpoint.c (insert_bp_location, describe_other_breakpoints, mention): Update. * cli/cli-cmds.c (edit_command, list_command, print_disassembly): Update. * corefile.c (memory_error): Update. * c-valprint.c (print_function_pointer_address, c_val_print): Update. * disasm.c (dis_asm_print_address): Update. * exec.c (print_section_info): Update. * f-valprint.c (f_val_print): Update. * infcmd.c: Include "arch-utils.h". (jump_command, program_info): Update. * linux-fork.c: Include "arch-utils.h". (info_forks_command): Update. * m2-valprint.c (print_function_pointer_address, print_unpacked_pointer, print_variable_at_address, m2_val_print): Update. * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command): Update. * printcmd.c (print_address, print_address_demangle, address_info): Update. * p-valprint.c (pascal_val_print): Update. * source.c: Include "arch-utils.h". (line_info): Update. * stack.c (frame_info, print_block_frame_labels): Update. * symfile.c (add_symbol_file_command, list_overlays_command): Update. * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol, print_partial_symbols, maintenance_info_psymtabs, maintenance_check_symtabs): Update. * symtab.c (find_pc_sect_symtab): Update. * target.c (deprecated_debug_xfer_memory): Update. * tracepoint.c (scope_info): Update. * tui/tui-stack.c (tui_make_status_line): Update. * valprint.c (val_print_string): Update. Update callers of paddr_nz to use paddress instead (keeping user-visible output identical): * alpha-tdep.c (alpha_heuristic_proc_start): Update. * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn, amd64_displaced_step_fixup): Update. * arch-utils.c (simple_displaced_step_copy_insn): Update. * auxv.c (fprint_target_auxv): Update. * breakpoint.c (insert_single_step_breakpoint): Update. * buildsym.c (finish_block): Update. * cli/cli-dump.c (restore_section_callback): Update. * fbsd-nat.c (fbsd_find_memory_regions): Update. * frame.c (frame_unwind_register_value): Update. * gcore.c (gcore_create_callback): Update. * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm, i386_record_lea_modrm_addr, i386_record_lea_modrm, i386_process_record): Update. * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id, ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id, ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update. * infrun.c (displaced_step_prepare, displaced_step_fixup, handle_inferior_event, insert_step_resume_breakpoint_at_sal, insert_longjmp_resume_breakpoint): Update. * linux-nat.c (linux_nat_find_memory_regions): Update. * linux-record.c (record_linux_system_call): Update. * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call): Update. * monitor.c (monitor_error, monitor_remove_breakpoint): Update. * record.c (record_arch_list_add_mem, record_wait, record_xfer_partial): Update. * remote-mips.c (mips_fetch_word, mips_check_lsi_error, mips_common_breakpoint): Update. * remote-sim.c (gdbsim_xfer_inferior_memory): Update. * rs6000-tdep.c (ppc_displaced_step_fixup): Update. * solib-som.c (som_current_sos): Update. * symfile.c (load_progress, generic_load): Update. * symfile-mem.c (add_vsyscall_page): Update. * valops.c (value_fetch_lazy): Update. * windows-tdep.c (windows_xfer_shared_library): Update. Update callers of paddr_nz to use paddress instead (changing user-visible output to make it more correct): * dwarf2loc.c (locexpr_describe_location): Update. * ia64-tdep.c (ia64_memory_insert_breakpoint, ia64_memory_remove_breakpoint): Update. * jv-valprint.c (java_value_print): Update. * m32c-tdep.c (m32c_m16c_address_to_pointer): Update. * monitor.c (monitor_read_memory): Update. Update callers of paddr to use paddress instead (changing user-visible output to make it more correct): * arm-tdep.c (arm_push_dummy_call): Update. * breakpoint.c (insert_bp_location, create_thread_event_breakpoint, create_breakpoint): Update. * darwin-nat-info.c (darwin_debug_regions): Update. * dcache.c (dcache_info): Update. * dsrec.c (load_srec, make_srec): Update. * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program, dwarf2_frame_cache): Update. * gcore.c (gcore_copy_callback): Update. * gnu-nat.c (gnu_xfer_memory): Update. * mips-linux-nat.c (mips_show_dr): Update. * monitor.c (monitor_write_memory, monitor_insert_breakpoint, monitor_remove_breakpoint): Update. * remote.c (compare_sections_command): Update. * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint, m32r_remove_breakpoint, m32r_insert_watchpoint, m32r_remove_watchpoint): Update. * sol-thread.c (info_cb): Update. * symfile.c (load_progress): Update. Update callers of paddress or paddr_nz to use hex_string instead (changes output of internal/error/debug messages only): * dwarf2read.c (dump_die_shallow): Update. * frame.c (fprint_field, fprint_frame, frame_pc_unwind, get_frame_func, create_new_frame): Update. * hppa-tdep.c (find_unwind_entry, unwind_command): Update. * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x, ia64_get_dyn_info_list): Update. * maint.c (maintenance_translate_address): Update. * mi/mi-cmd-var.c (mi_cmd_var_create): Update. * target.c (target_flash_erase): Update. Update callers of paddr/paddr_nz to use phex/phex_nz instead, using an appropriate address size. Remove use of strlen_paddr. * exec.c (exec_files_info): Update. * i386-nat.c (i386_show_dr): Update. * remote.c (remote_flash_erase): Update. * m32r-rom.c (m32r_load_section): Update. * monitor.c (monitor_vsprintf, monitor_store_register): Update. * remote.c (remote_check_symbols, remote_search_memory): Update. * remote-mips.c (mips_request, mips_common_breakpoint): Update. * scm-valprint.c (scm_ipruk, scm_scmval_print): Update. * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update. * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs, sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs): Update. * xcoffsolib.c (sharedlibrary_command): Update. * maint.c (maint_print_section_info): Add ADDR_SIZE parameter. Use hex_string_custom instead of paddr. (print_bfd_section_info): Pass address size. (print_objfile_section_info): Likewise. * annotate.h (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * annotate.c (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * source.c (identify_source_line): Update call to annotate_source. * stack.c (print_frame_info, print_frame): Update call to annotate_frame_begin. * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter. (create_breakpoint, create_ada_exception_breakpoint): Update call. * stack.c (print_block_frame_labels): Add GDBARCH parameter. (print_frame_label_vars): Update call. * symmisc.c (print_partial_symbols): Add GDBARCH parameter. (dump_psymtab): Update call to print_partial_symbols. (struct print_symbol_args): Add GDBARCH member. (dump_symtab_1): Set print_symbol_args architecture member. (print_symbol): Use it. * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH parameter. * windows-tdep.c (windows_xfer_shared_library): Likewise. * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member. (core_process_module_section): Pass architecture from cpms_data to windows_xfer_shared_library. (windows_core_xfer_shared_libraries): Initialize cmps_data architecture member. * windows-nat.c (windows_xfer_shared_libraries): Pass architecture to windows_xfer_shared_library. * defs.h (print_address): Add GDBARCH parameter. * printcmd.c (print_address): Add GDBARCH parameter. (print_scalar_formatted, do_examine): Update call. * findcmd.c (find_command): Update call. * tracepoint.c: Include "arch-utils.h". (trace_find_line_command): Update call. * tui/tui-disasm.c (tui_disassemble): Update call. * value.h (print_address_demangle): Add GDBARCH parameter. * printcmd.c (print_address_demangle): Add GDBARCH parameter. * c-valprint.c (print_function_pointer_address, c_val_print): Update call. * f-valprint.c (f_val_print): Update call. * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call. * jv-valprint.c (java_val_print): Update call. * m2-valprint.c (print_function_pointer_address, m2_val_print): Update call. * p-valprint.c (pascal_val_print): Update call. * disasm.c (gdb_disassemble_info): Install architecture into di.application_data field. testsuite/ChangeLog: * gdb.threads/tls-shared.exp: Update to locexpr_describe_location change to prefix TLS offset in hex with 0x. doc/ChangeLog: * gdbint.texinfo (Item Output Functions): Update signature for ui_out_field_core_addr.
2009-07-02 19:21:10 +02:00
fprintf_unfiltered (gdb_stdlog, "displaced: copy %s->%s: ",
paddress (gdbarch, from), paddress (gdbarch, to));
Implement displaced stepping. gdb/ * gdbarch.sh (max_insn_length): New 'variable'. (displaced_step_copy, displaced_step_fixup) (displaced_step_free_closure, displaced_step_location): New functions. (struct displaced_step_closure): Add forward declaration. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c: #include "objfiles.h". (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New functions. * arch-utils.h (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New prototypes. * i386-tdep.c (I386_MAX_INSN_LEN): Rename to... (I386_MAX_MATCHED_INSN_LEN): ... this. (i386_absolute_jmp_p, i386_absolute_call_p) (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p) (i386_displaced_step_fixup): New functions. (struct i386_insn, i386_match_insn): Update. (i386_gdbarch_init): Set gdbarch_max_insn_length. * i386-tdep.h (I386_MAX_INSN_LEN): New. (i386_displaced_step_fixup): New prototype. * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h". Register gdbarch_displaced_step_copy, gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure, and gdbarch_displaced_step_location functions. * infrun.c (debug_displaced): New variable. (show_debug_displaced): New function. (struct displaced_step_request): New struct. (displaced_step_request_queue, displaced_step_ptid) (displaced_step_gdbarch, displaced_step_closure) (displaced_step_original, displaced_step_copy) (displaced_step_saved_copy, can_use_displaced_stepping): New variables. (show_can_use_displaced_stepping, use_displaced_stepping) (displaced_step_clear, cleanup_displaced_step_closure) (displaced_step_dump_bytes, displaced_step_prepare) (displaced_step_clear_cleanup, write_memory_ptid) (displaced_step_fixup): New functions. (resume): Call displaced_step_prepare. (proceed): Call read_pc once, and remember the value. If using displaced stepping, don't remove breakpoints. (handle_inferior_event): Call displaced_step_fixup. Add some debugging output. When we try to step over a breakpoint, but get a signal to deliver to the thread instead, ensure the step-resume breakpoint is actually inserted. If a thread hop is needed, and displaced stepping is enabled, don't remove breakpoints. (init_wait_for_inferior): Call displaced_step_clear. (_initialize_infrun): Add "set debug displaced" command. Add "maint set can-use-displaced-stepping" command. Clear displaced_step_ptid. * inferior.h (debug_displaced): Declare variable. (displaced_step_dump_bytes): Declare function. * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update dependencies. gdb/testsuite/ * gdb.asm/asmsrc1.s: Add scratch space. gdb/doc/ * gdb.texinfo (Debugging Output): Document "set/show debug displaced". (Maintenance Commands): Document "maint set/show can-use-displaced-stepping".
2008-05-02 18:49:54 +02:00
displaced_step_dump_bytes (gdb_stdlog, buf, len);
}
return (struct displaced_step_closure *) buf;
}
void
simple_displaced_step_free_closure (struct gdbarch *gdbarch,
struct displaced_step_closure *closure)
{
xfree (closure);
}
int
default_displaced_step_hw_singlestep (struct gdbarch *gdbarch,
struct displaced_step_closure *closure)
{
return !gdbarch_software_single_step_p (gdbarch);
}
Implement displaced stepping. gdb/ * gdbarch.sh (max_insn_length): New 'variable'. (displaced_step_copy, displaced_step_fixup) (displaced_step_free_closure, displaced_step_location): New functions. (struct displaced_step_closure): Add forward declaration. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c: #include "objfiles.h". (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New functions. * arch-utils.h (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New prototypes. * i386-tdep.c (I386_MAX_INSN_LEN): Rename to... (I386_MAX_MATCHED_INSN_LEN): ... this. (i386_absolute_jmp_p, i386_absolute_call_p) (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p) (i386_displaced_step_fixup): New functions. (struct i386_insn, i386_match_insn): Update. (i386_gdbarch_init): Set gdbarch_max_insn_length. * i386-tdep.h (I386_MAX_INSN_LEN): New. (i386_displaced_step_fixup): New prototype. * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h". Register gdbarch_displaced_step_copy, gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure, and gdbarch_displaced_step_location functions. * infrun.c (debug_displaced): New variable. (show_debug_displaced): New function. (struct displaced_step_request): New struct. (displaced_step_request_queue, displaced_step_ptid) (displaced_step_gdbarch, displaced_step_closure) (displaced_step_original, displaced_step_copy) (displaced_step_saved_copy, can_use_displaced_stepping): New variables. (show_can_use_displaced_stepping, use_displaced_stepping) (displaced_step_clear, cleanup_displaced_step_closure) (displaced_step_dump_bytes, displaced_step_prepare) (displaced_step_clear_cleanup, write_memory_ptid) (displaced_step_fixup): New functions. (resume): Call displaced_step_prepare. (proceed): Call read_pc once, and remember the value. If using displaced stepping, don't remove breakpoints. (handle_inferior_event): Call displaced_step_fixup. Add some debugging output. When we try to step over a breakpoint, but get a signal to deliver to the thread instead, ensure the step-resume breakpoint is actually inserted. If a thread hop is needed, and displaced stepping is enabled, don't remove breakpoints. (init_wait_for_inferior): Call displaced_step_clear. (_initialize_infrun): Add "set debug displaced" command. Add "maint set can-use-displaced-stepping" command. Clear displaced_step_ptid. * inferior.h (debug_displaced): Declare variable. (displaced_step_dump_bytes): Declare function. * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update dependencies. gdb/testsuite/ * gdb.asm/asmsrc1.s: Add scratch space. gdb/doc/ * gdb.texinfo (Debugging Output): Document "set/show debug displaced". (Maintenance Commands): Document "maint set/show can-use-displaced-stepping".
2008-05-02 18:49:54 +02:00
CORE_ADDR
displaced_step_at_entry_point (struct gdbarch *gdbarch)
{
CORE_ADDR addr;
int bp_len;
addr = entry_point_address ();
/* Inferior calls also use the entry point as a breakpoint location.
We don't want displaced stepping to interfere with those
breakpoints, so leave space. */
gdbarch_breakpoint_from_pc (gdbarch, &addr, &bp_len);
addr += bp_len * 2;
Implement displaced stepping. gdb/ * gdbarch.sh (max_insn_length): New 'variable'. (displaced_step_copy, displaced_step_fixup) (displaced_step_free_closure, displaced_step_location): New functions. (struct displaced_step_closure): Add forward declaration. * gdbarch.c, gdbarch.h: Regenerated. * arch-utils.c: #include "objfiles.h". (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New functions. * arch-utils.h (simple_displaced_step_copy_insn) (simple_displaced_step_free_closure) (displaced_step_at_entry_point): New prototypes. * i386-tdep.c (I386_MAX_INSN_LEN): Rename to... (I386_MAX_MATCHED_INSN_LEN): ... this. (i386_absolute_jmp_p, i386_absolute_call_p) (i386_ret_p, i386_call_p, i386_breakpoint_p, i386_syscall_p) (i386_displaced_step_fixup): New functions. (struct i386_insn, i386_match_insn): Update. (i386_gdbarch_init): Set gdbarch_max_insn_length. * i386-tdep.h (I386_MAX_INSN_LEN): New. (i386_displaced_step_fixup): New prototype. * i386-linux-tdep.c (i386_linux_init_abi): Include "arch-utils.h". Register gdbarch_displaced_step_copy, gdbarch_displaced_step_fixup, gdbarch_displaced_step_free_closure, and gdbarch_displaced_step_location functions. * infrun.c (debug_displaced): New variable. (show_debug_displaced): New function. (struct displaced_step_request): New struct. (displaced_step_request_queue, displaced_step_ptid) (displaced_step_gdbarch, displaced_step_closure) (displaced_step_original, displaced_step_copy) (displaced_step_saved_copy, can_use_displaced_stepping): New variables. (show_can_use_displaced_stepping, use_displaced_stepping) (displaced_step_clear, cleanup_displaced_step_closure) (displaced_step_dump_bytes, displaced_step_prepare) (displaced_step_clear_cleanup, write_memory_ptid) (displaced_step_fixup): New functions. (resume): Call displaced_step_prepare. (proceed): Call read_pc once, and remember the value. If using displaced stepping, don't remove breakpoints. (handle_inferior_event): Call displaced_step_fixup. Add some debugging output. When we try to step over a breakpoint, but get a signal to deliver to the thread instead, ensure the step-resume breakpoint is actually inserted. If a thread hop is needed, and displaced stepping is enabled, don't remove breakpoints. (init_wait_for_inferior): Call displaced_step_clear. (_initialize_infrun): Add "set debug displaced" command. Add "maint set can-use-displaced-stepping" command. Clear displaced_step_ptid. * inferior.h (debug_displaced): Declare variable. (displaced_step_dump_bytes): Declare function. * Makefile.in (arch-utils.o, i386-linux-tdep.o): Update dependencies. gdb/testsuite/ * gdb.asm/asmsrc1.s: Add scratch space. gdb/doc/ * gdb.texinfo (Debugging Output): Document "set/show debug displaced". (Maintenance Commands): Document "maint set/show can-use-displaced-stepping".
2008-05-02 18:49:54 +02:00
return addr;
}
int
legacy_register_sim_regno (struct gdbarch *gdbarch, int regnum)
{
/* Only makes sense to supply raw registers. */
gdb_assert (regnum >= 0 && regnum < gdbarch_num_regs (gdbarch));
/* NOTE: cagney/2002-05-13: The old code did it this way and it is
suspected that some GDB/SIM combinations may rely on this
behavour. The default should be one2one_register_sim_regno
(below). */
if (gdbarch_register_name (gdbarch, regnum) != NULL
&& gdbarch_register_name (gdbarch, regnum)[0] != '\0')
return regnum;
else
return LEGACY_SIM_REGNO_IGNORE;
}
CORE_ADDR
* gdbarch.sh (skip_trampoline_code): Add FRAME argument. * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.c (generic_skip_trampoline_code): Add FRAME argument. * arch-utils.h (generic_skip_trampoline_code): Likewise. * infrun.c (handle_inferior_event): Pass current frame to gdbarch_skip_trampoline_code and skip_language_trampoline. * language.c (unk_lang_trampoline): Add FRAME argument. (skip_language_trampoline): Add FRAME argument. Pass it to skip_trampoline callback. * language.h: Add forward declaration of struct frame_info. (struct language_defn): Add FRAME argument to skip_trampoline. (skip_language_trampoline): Add FRAME argument. * cp-abi.c (cplus_skip_trampoline): Add FRAME argument. Pass it to skip_trampoline callback. * cp-abi.h: Add forward declaration of struct frame_info. (cplus_skip_trampoline): Add FRAME argument. (struct cp_abi_ops): Add FRAME argument to skip_trampoline callback. * gnu-v3-abi.c (gnuv3_skip_trampoline): Add FRAME argument. Pass it to gdbarch_skip_trampoline_code. * objc-lang.c (objc_skip_trampoline): Add FRAME argument. Pass it to gdbarch_skip_trampoline_code. * minsyms.c (find_solib_trampoline_target): Add FRAME argument. * symtab.h (find_solib_trampoline_target): Likewise. * obsd-tdep.c (obsd_skip_solib_resolver): Pass current frame to find_solib_trampoline_target. * arm-tdep.c (arm_skip_stub): Add FRAME argument. Read registers from FRAME instead of calling read_register. * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Add FRAME argument. Read registers from FRAME instead of using read_register. * hppa-tdep.c (hppa_skip_trampoline_code): Likewise. * hppa-tdep.h (hppa_skip_trampoline_code): Add FRAME argument. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Add FRAME argument. * m32c-tdep.c (m32c_skip_trampoline_code): Add FRAME argument. * mips-tdep.c (mips_skip_trampoline_code): Add FRAME argument. Read registers from FRAME instead of using read_signed_register. * ppc-linux-tdep.c (ppc_linux_skip_trampoline_code): Add FRAME argument. (ppc64_standard_linkage_target): Likewise. Read registers from FRAME instead of using read_register. (ppc64_skip_trampoline_code): Add FRAME argument. Pass it to ppc64_standard_linkage_target. * rs6000-tdep.c (rs6000_skip_trampoline_code): Add FRAME argument. Pass it to find_solib_trampoline_target. Read registers from FRAME instead of using read_register. * xstormy16-tdep.c (xstormy16_skip_trampoline_code): Add FRAME argument.
2007-06-16 00:39:52 +02:00
generic_skip_trampoline_code (struct frame_info *frame, CORE_ADDR pc)
{
return 0;
}
CORE_ADDR
generic_skip_solib_resolver (struct gdbarch *gdbarch, CORE_ADDR pc)
{
return 0;
}
int
* defs.h (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * gdbcore.h (read_memory_integer, safe_read_memory_integer, read_memory_unsigned_integer, write_memory_signed_integer, write_memory_unsigned_integer): Add BYTE_ORDER parameter. * corefile.c (struct captured_read_memory_integer_arguments): Add BYTE_ORDER member. (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into struct captured_read_memory_integer_arguments. (do_captured_read_memory_integer): Pass it to read_memory_integer. (read_memory_integer): Add BYTE_ORDER parameter. Pass it to extract_signed_integer. (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it to store_signed_integer. (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to store_unsigned_integer. * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter. * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. Update calls to extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer, read_memory_integer, read_memory_unsigned_integer, safe_read_memory_integer, write_memory_signed_integer, write_memory_unsigned_integer, and get_target_memory_unsigned to pass byte order: * ada-lang.c (ada_value_binop): Update. * ada-valprint.c (char_at): Update. * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update. * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call, alpha_extract_return_value, alpha_read_insn, alpha_get_longjmp_target): Update. * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update. * amd64obsd-tdep.c (amd64obsd_supply_uthread, amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update. * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue, amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel, amd64_displaced_step_fixup): Update. * arm-linux-tdep.c (arm_linux_sigreturn_init, arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update. * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value, arm_store_return_value, arm_return_value): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. * auxv.c (default_auxv_parse): Update. * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address, avr_scan_prologue, avr_extract_return_value, avr_frame_prev_register, avr_push_dummy_call): Update. * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset, bsd_uthread_wait, bsd_uthread_thread_alive, bsd_uthread_extra_thread_info): Update. * c-lang.c (c_printstr, print_wchar): Update. * cp-valprint.c (cp_print_class_member): Update. * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache, cris_push_dummy_call, cris_scan_prologue, cris_store_return_value, cris_extract_return_value, find_step_target, dip_prefix, sixteen_bit_offset_branch_op, none_reg_mode_jump_op, move_mem_to_reg_movem_op, get_data_from_address): Update. * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update. * dwarf2-frame.c (execute_cfa_program): Update. * dwarf2loc.c (find_location_expression): Update. * dwarf2read.c (dwarf2_const_value): Update. * expprint.c (print_subexp_standard): Update. * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address, unsigned_address_to_pointer, address_to_signed_pointer, read_var_value): Update. * frame.c (frame_unwind_register_signed, frame_unwind_register_unsigned, get_frame_memory_signed, get_frame_memory_unsigned): Update. * frame-unwind.c (frame_unwind_got_constant): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp, frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache): Update. * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue, frv_extract_return_value, find_func_descr, frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update. * f-valprint.c (f_val_print): Update. * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr): Update. * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue, h8300_push_dummy_call, h8300_extract_return_value, h8300h_extract_return_value, h8300_store_return_value, h8300h_store_return_value): Update. * hppabsd-tdep.c (hppabsd_find_global_pointer): Update. * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline, hppa64_hpux_in_solib_call_trampoline, hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code, hppa_hpux_sigtramp_frame_unwind_cache, hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer, hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern, hppa32_hpux_search_dummy_call_sequence, hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state, hppa_hpux_unwind_adjust_stub): Update. * hppa-linux-tdep.c (insns_match_pattern, hppa_linux_find_global_pointer): Update. * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call, hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call, skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache, hppa_pseudo_register_read, hppa_frame_prev_register_helper, hppa_match_insns): Update. * hpux-thread.c (hpux_thread_fetch_registers): Update. * i386-tdep.c (i386bsd_sigcontext_addr): Update. * i386-cygwin-tdep.c (core_process_module_section): Update. * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn, amd64_darwin_sstep_at_sigreturn): Update. * i386-darwin-tdep.c (i386_darwin_sigcontext_addr, amd64_darwin_sigcontext_addr): Likewise. * i386-linux-nat.c (i386_linux_sigcontext_addr): Update. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update. * i386-nto-tdep.c (i386nto_sigcontext_addr): Update. * i386obsd-nat.c (i386obsd_supply_pcb): Update. * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread, i386obsd_trapframe_cache): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump, i386_analyze_frame_setup, i386_analyze_prologue, i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache, i386_get_longjmp_target, i386_push_dummy_call, i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr, i386_fetch_pointer_argument): Update. * i387-tdep.c (i387_supply_fsave): Update. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update. * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write, examine_prologue, ia64_frame_cache, ia64_frame_prev_register, ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register, ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id, ia64_libunwind_frame_prev_register, ia64_libunwind_sigtramp_frame_this_id, ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer, find_extant_func_descr, find_func_descr, ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id, ia64_unwind_pc): Update. * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer, iq2000_scan_prologue, iq2000_extract_return_value, iq2000_push_dummy_call): Update. * irix5nat.c (fill_gregset): Update. * jv-lang.c (evaluate_subexp_java): Update. * jv-valprint.c (java_value_print): Update. * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call, lm32_extract_return_value, lm32_store_return_value): Update. * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value, m32c_skip_trampoline_code, m32c_m16c_address_to_pointer, m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_store_return_value, decode_prologue, m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value): Update. * m68hc11-tdep.c (m68hc11_pseudo_register_read, m68hc11_pseudo_register_write, m68hc11_analyze_instruction, m68hc11_push_dummy_call): Update. * m68linux-tdep.c (m68k_linux_pc_in_sigtramp, m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache): Update. * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup, m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache, m68k_get_longjmp_target): Update. * m88k-tdep.c (m88k_fetch_instruction): Update. * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write, mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update. * mi/mi-main.c (mi_cmd_data_write_memory): Update. * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg, mips64_linux_get_longjmp_target, mips64_fill_gregset, mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update. * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update. * mips-tdep.c (mips_fetch_instruction, fetch_mips_16, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call, mips_single_step_through_delay, mips_skip_pic_trampoline_code, mips_integer_to_address): Update. * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call): Update. * monitor.c (monitor_supply_register, monitor_write_memory, monitor_read_memory_single): Update. * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value, moxie_analyze_prologue): Update. * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor, mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info, mt_push_dummy_call): Update. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class, find_implementation_from_class): Update. * ppc64-linux-tdep.c (ppc64_desc_entry_point, ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache): Update. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer, ppcobsd_sigtramp_frame_cache): Update. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call, do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_return_value): Update. * ppc-linux-nat.c (ppc_linux_auxv_parse): Update. * procfs.c (procfs_auxv_parse): Update. * p-valprint.c (pascal_val_print): Update. * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned, regcache_raw_write_signed, regcache_raw_write_unsigned, regcache_cooked_read_signed, regcache_cooked_read_unsigned, regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update. * remote-m32r-sdi.c (m32r_fetch_register): Update. * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory): Update. * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value, rs6000_convert_from_func_ptr_addr, branch_dest, rs6000_software_single_step): Update. * rs6000-tdep.c (rs6000_in_function_epilogue_p, ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence, bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue, rs6000_skip_main_prologue, rs6000_skip_trampoline_code, rs6000_frame_cache): Update. * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write, s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load, s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache, extend_simple_arg, s390_push_dummy_call, s390_return_value): Update. * scm-exp.c (scm_lreadr): Update. * scm-lang.c (scm_get_field, scm_unpack): Update. * scm-valprint.c (scm_val_print): Update. * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call, score_fetch_inst): Update. * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way, sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value, sh64_pseudo_register_read, sh64_pseudo_register_write, sh64_frame_prev_register): Update: * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu, sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update. * solib-darwin.c (darwin_load_image_infos): Update. * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2, find_canonical_descriptor_in_load_object): Update. * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Update. * solib-som.c (som_solib_create_inferior_hook, link_map_start, som_current_sos, som_open_symbol_file_object): Update. * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME): Update. * solib-svr4.c (read_program_header, scan_dyntag_auxv, solib_svr4_r_ldsomap): Update. * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update. * sparc64obsd-tdep.c (sparc64obsd_supply_uthread, sparc64obsd_collect_uthread): Update. * sparc64-tdep.c (sparc64_pseudo_register_read, sparc64_pseudo_register_write, sparc64_supply_gregset, sparc64_collect_gregset): Update. * sparc-linux-tdep.c (sparc32_linux_step_trap): Update. * sparcobsd-tdep.c (sparc32obsd_supply_uthread, sparc32obsd_collect_uthread): Update. * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code, sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow, sparc_collect_rwindow): Update. * spu-linux-nat.c (parse_spufs_run): Update. * spu-tdep.c (spu_pseudo_register_read_spu, spu_pseudo_register_write_spu, spu_pointer_to_address, spu_analyze_prologue, spu_in_function_epilogue_p, spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step, spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect, info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist, info_spu_dma_command, info_spu_proxydma_command): Update. * stack.c (print_frame_nameless_args, frame_info): Update. * symfile.c (read_target_long_array, simple_read_overlay_table, simple_read_overlay_region_table): Update. * target.c (debug_print_register): Update. * tramp-frame.c (tramp_frame_start): Update. * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call, v850_extract_return_value, v850_store_return_value, * valarith.c (value_binop, value_bit_index): Update. * valops.c (value_cast): Update. * valprint.c (val_print_type_code_int, val_print_string, read_string): Update. * value.c (unpack_long, unpack_double, unpack_field_as_long, modify_field, pack_long): Update. * vax-tdep.c (vax_store_arguments, vax_push_dummy_call, vax_skip_prologue): Update. * xstormy16-tdep.c (xstormy16_push_dummy_call, xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p, xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry, xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update. * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read, xtensa_pseudo_register_write, xtensa_frame_cache, xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update. * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. (decimal_to_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. Pass it to match_endianness. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. Pass them to match_endianness. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. Pass them to match_endianness. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. Pass them to match_endianness. * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and BYTE_ORDER_Y output parameters. (value_binop): Update call to value_args_as_decimal. Update calls to decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero, decimal_binop, decimal_compare and decimal_convert to pass/receive byte order: * c-exp.y (parse_number): Update. * printcmd.c (printf_command): Update. * valarith.c (value_args_as_decimal, value_binop, value_logical_not, value_equal, value_less): Update. * valops.c (value_cast, value_one): Update. * valprint.c (print_decimal_floating): Update. * value.c (unpack_long, unpack_double): Update. * python/python-value.c (valpy_nonzero): Update. * ada-valprint.c (char_at): Add BYTE_ORDER parameter. (printstr): Update calls to char_at. (ada_val_print_array): Likewise. * valprint.c (read_string): Add BYTE_ORDER parameter. (val_print_string): Update call to read_string. * c-lang.c (c_get_string): Likewise. * charset.h (target_wide_charset): Add BYTE_ORDER parameter. * charset.c (target_wide_charset): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * printcmd.c (printf_command): Update calls to target_wide_charset. * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter. Pass to target_wide_charset. Use it instead of current_gdbarch. (classify_type): Add BYTE_ORDER parameter. Pass to charset_for_string_type. Allow NULL encoding pointer. (print_wchar): Add BYTE_ORDER parameter. (c_emit_char): Update calls to classify_type and print_wchar. (c_printchar, c_printstr): Likewise. * gdbarch.sh (in_solib_return_trampoline): Convert to type "m". * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH parameter. * arch-utils.c (generic_in_solib_return_trampoline): Likewise. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise. (rs6000_skip_trampoline_code): Update call. * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to dynamic_sigtramp_offset and pc_in_sigtramp callbacks. (alpha_read_insn): Add GDBARCH parameter. * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter. (alpha_register_to_value): Pass architecture to alpha_sts. (alpha_extract_return_value): Likewise. (alpha_value_to_register): Pass architecture to alpha_lds. (alpha_store_return_value): Likewise. (alpha_read_insn): Add GDBARCH parameter. (alpha_skip_prologue): Pass architecture to alpha_read_insn. (alpha_heuristic_proc_start): Likewise. (alpha_heuristic_frame_unwind_cache): Likewise. (alpha_next_pc): Likewise. (alpha_sigtramp_frame_this_id): Pass architecture to tdep->dynamic_sigtramp_offset callback. (alpha_sigtramp_frame_sniffer): Pass architecture to tdep->pc_in_sigtramp callback. * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter. (alphafbsd_sigtramp_offset): Likewise. * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH parameter. Pass to alpha_read_insn. (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset_1. (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset. (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn and alpha_linux_sigtramp_offset. * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter. (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alphanbsd_sigtramp_offset. * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter. (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_read_insn. (alphaobsd_sigcontext_addr): Pass architecture to alphaobsd_sigtramp_offset. * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH parameter. * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter. (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue. (amd64_frame_cache): Likewise. * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove. (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros. * arm-wince-tdep.c: Include "frame.h". * avr-tdep.c (EXTRACT_INSN): Remove. (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN. (avr_skip_prologue): Pass architecture to avr_scan_prologue. (avr_frame_unwind_cache): Likewise. * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member. (find_step_target): Initialize it. (get_data_from_address): Add BYTE_ORDER parameter. (bdap_prefix): Pass byte order to get_data_from_address. (handle_prefix_assign_mode_for_aritm_op): Likewise. (three_operand_add_sub_cmp_and_or_op): Likewise. (handle_inc_and_index_mode_for_aritm_op): Likewise. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter. (frv_linux_sigcontext_reg_addr): Pass architecture to frv_linux_pc_in_sigtramp. (frv_linux_sigtramp_frame_sniffer): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter. (h8300_analyze_prologue): Add GDBARCH parameter. Pass to h8300_is_argument_spill. (h8300_frame_cache, h8300_skip_prologue): Pass architecture to h8300_analyze_prologue. * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to in_solib_call_trampoline callback. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH parameter. (hppa64_push_dummy_call): Pass architecture to hppa64_convert_code_addr_to_fptr. (hppa_match_insns): Add GDBARCH parameter. (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to hppa_match_insns. (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to hppa_match_insns_relaxed. (hppa_stub_unwind_sniffer): Pass architecture to tdep->in_solib_call_trampoline callback. * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter. (hppa32_hpux_search_dummy_call_sequence): Pass architecture to hppa_hpux_search_pattern. * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter. (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter. Pass to insns_match_pattern. (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to hppa_linux_sigtramp_find_sigcontext. (hppa_linux_sigtramp_frame_sniffer): Likewise. (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter. (hppa64_hpux_in_solib_call_trampoline): Likewise. * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter. (i386_analyze_frame_setup): Add GDBARCH parameter. (i386_analyze_prologue): Add GDBARCH parameter. Pass to i386_follow_jump and i386_analyze_frame_setup. (i386_skip_prologue): Pass architecture to i386_analyze_prologue and i386_follow_jump. (i386_frame_cache): Pass architecture to i386_analyze_prologue. (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass frame to i386_pe_skip_trampoline_code. * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to sigcontext_register_address callback. * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter. (ia64_find_unwind_table): Pass architecture to ia64_find_global_pointer. (find_extant_func_descr): Add GDBARCH parameter. (find_func_descr): Pass architecture to find_extant_func_descr and ia64_find_global_pointer. (ia64_sigtramp_frame_init_saved_regs): Pass architecture to tdep->sigcontext_register_address callback. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add GDBARCH parameter. * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter. (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue. * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter. (lm32_skip_prologue, lm32_frame_cache): Pass architecture to lm32_analyze_prologue. * m32r-tdep.c (decode_prologue): Add GDBARCH parameter. (m32r_skip_prologue): Pass architecture to decode_prologue. * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter. (m68hc11_scan_prologue): Pass architecture to m68hc11_analyze_instruction. * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter. (m68k_analyze_prologue): Pass architecture to m68k_analyze_frame_setup. * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter. (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order to m88k_fetch_instruction. (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue. (m88k_frame_cache): Likewise. * mep-tdep.c (mep_get_insn): Add GDBARCH parameter. (mep_analyze_prologue): Pass architecture to mep_get_insn. * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter. (mips32_next_pc): Pass architecture to mips_fetch_instruction. (deal_with_atomic_sequence): Likewise. (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction. (mips16_scan_prologue): Likewise. (mips32_scan_prologue): Likewise. (mips16_in_function_epilogue_p): Likewise. (mips32_in_function_epilogue_p): Likewise. (mips_about_to_return): Likewise. (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue. (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue. (mips_skip_prologue): Pass architecture to mips16_scan_prologue and mips32_scan_prologue. (mips_in_function_epilogue_p): Pass architecture to mips16_in_function_epilogue_p and mips32_in_function_epilogue_p. (heuristic_proc_start): Pass architecture to mips_fetch_instruction and mips_about_to_return. (mips_skip_mips16_trampoline_code): Pass architecture to mips_fetch_instruction. (fetch_mips_16): Add GDBARCH parameter. (mips16_next_pc): Pass architecture to fetch_mips_16. (extended_mips16_next_pc): Pass architecture to unpack_mips16 and fetch_mips_16. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class): Add GDBARCH parameter. (find_implementation_from_class): Add GDBARCH parameter, pass to read_objc_class, read_objc_methlist_nmethods, and read_objc_methlist_method. (find_implementation): Add GDBARCH parameter, pass to read_objc_object and find_implementation_from_class. (resolve_msgsend, resolve_msgsend_stret): Pass architecture to find_implementation. (resolve_msgsend_super, resolve_msgsend_super_stret): Pass architecture to read_objc_super and find_implementation_from_class. * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter. (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target, ppc64_standard_linkage3_target): Pass architecture to ppc64_desc_entry_point. * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter. (skip_prologue): Pass byte order to bl_to_blrl_insn_p. (rs6000_fetch_instruction): Add GDBARCH parameter. (rs6000_skip_stack_check): Add GDBARCH parameter, pass to rs6000_fetch_instruction. (skip_prologue): Pass architecture to rs6000_fetch_instruction. * remote-mips.c (mips_store_word): Return old_contents as host integer value instead of target bytes. * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member. (s390_analyze_prologue): Initialize it. (extend_simple_arg): Add GDBARCH parameter. (s390_push_dummy_call): Pass architecture to extend_simple_arg. * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter. * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter. (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field. * scm-valprint.c (scm_scmval_print): Likewise. (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define SCM_BYTE_ORDER. * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter. (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to look_for_args_moves. (sh64_skip_prologue): Pass architecture to sh64_skip_prologue_hard_way. * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter. (sh_skip_prologue): Pass architecture to sh_analyze_prologue. (sh_frame_cache): Likewise. * solib-irix.c (extract_mips_address): Add GDBARCH parameter. (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Pass architecture to extract_mips_address. * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter. * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter. (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture to sparc_fetch_wcookie. (sparc32_frame_prev_register): Likewise. * sparc64-tdep.c (sparc64_frame_prev_register): Likewise. * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter. (spu_skip_prologue): Pass architecture to spu_analyze_prologue. (spu_virtual_frame_pointer): Likewise. (spu_frame_unwind_cache): Likewise. (info_spu_mailbox_list): Add BYTE_ORER parameter. (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list. (info_spu_dma_cmdlist): Add BYTE_ORER parameter. (info_spu_dma_command, info_spu_proxydma_command): Pass byte order to info_spu_dma_cmdlist. * symfile.c (read_target_long_array): Add GDBARCH parameter. (simple_read_overlay_table, simple_read_overlay_region_table, simple_overlay_update_1): Pass architecture to read_target_long_array. * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter. (v850_frame_cache): Pass architecture to v850_analyze_prologue. * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH parameter. (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture to xstormy16_analyze_prologue. (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter. (xstormy16_find_jmp_table_entry): Likewise. (xstormy16_skip_trampoline_code): Pass architecture to xstormy16_resolve_jmp_table_entry. (xstormy16_pointer_to_address): Likewise. (xstormy16_address_to_pointer): Pass architecture to xstormy16_find_jmp_table_entry. * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter. (call0_analyze_prologue): Add GDBARCH parameter, pass to call0_track_op. (call0_frame_cache): Pass architecture to call0_analyze_prologue. (xtensa_skip_prologue): Likewise.
2009-07-02 19:25:59 +02:00
generic_in_solib_return_trampoline (struct gdbarch *gdbarch,
* blockframe.c (find_pc_partial_function_gnu_ifunc): Change type of "name" parameter to const char ** from char **. All callers updated. (find_pc_partial_function): Ditto. (cache_pc_function_name): Change type to const char * from char *. * symtab.h ((find_pc_partial_function_gnu_ifunc): Update. (find_pc_partial_function): Update. * alpha-tdep.h (struct gdbarch_tdep, member pc_in_sigtramp): Change type of "name" parameter to const char * from char *. All uses updated. * arch-utils.c (generic_in_solib_return_trampoline): Change type of "name" parameter to const char * from char *. * arch-utils.h (generic_in_solib_return_trampoline): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Change type of "name" parameter to const char * from char *. * gdbarch.sh (in_solib_return_trampoline): Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Update. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Update. * m32r-linux-tdep.c (m32r_linux_pc_in_sigtramp): Change type of "name" parameter to const char * from char *. * skip.c (skip_function_pc): Ditto. * sparc-sol2-tdep.c (sparc_sol2_pc_in_sigtramp): Ditto. * sparc-tdep.h (sparc_sol2_pc_in_sigtramp): Update. * sparc64fbsd-tdep.c (sparc64fbsd_pc_in_sigtramp): Ditto. * sparc64nbsd-tdep.c (sparc64nbsd_pc_in_sigtramp): Ditto. * sparc64obsd-tdep.c (sparc64obsd_pc_in_sigtramp): Ditto. * sparcnbsd-tdep.c (sparc32nbsd_pc_in_sigtramp): Ditto. * sparcobsd-tdep.c (sparc32obsd_pc_in_sigtramp): Ditto. * nbsd-tdep.c (nbsd_pc_in_sigtramp): Similary for "func_name". * nbsd-tdep.h (nbsd_pc_in_sigtramp): Update.
2012-02-02 21:19:17 +01:00
CORE_ADDR pc, const char *name)
{
return 0;
}
int
generic_in_function_epilogue_p (struct gdbarch *gdbarch, CORE_ADDR pc)
{
return 0;
}
/* Helper functions for gdbarch_inner_than */
int
2000-07-30 03:48:28 +02:00
core_addr_lessthan (CORE_ADDR lhs, CORE_ADDR rhs)
{
return (lhs < rhs);
}
int
2000-07-30 03:48:28 +02:00
core_addr_greaterthan (CORE_ADDR lhs, CORE_ADDR rhs)
{
return (lhs > rhs);
}
/* Misc helper functions for targets. */
CORE_ADDR
core_addr_identity (struct gdbarch *gdbarch, CORE_ADDR addr)
{
return addr;
}
CORE_ADDR
convert_from_func_ptr_addr_identity (struct gdbarch *gdbarch, CORE_ADDR addr,
struct target_ops *targ)
{
return addr;
}
int
no_op_reg_to_regnum (struct gdbarch *gdbarch, int reg)
{
return reg;
}
void
MIPS: Keep the ISA bit in compressed code addresses 1. Background information The MIPS architecture, as originally designed and implemented in mid-1980s has a uniform instruction word size that is 4 bytes, naturally aligned. As such all MIPS instructions are located at addresses that have their bits #1 and #0 set to zeroes, and any attempt to execute an instruction from an address that has any of the two bits set to one causes an address error exception. This may for example happen when a jump-register instruction is executed whose register value used as the jump target has any of these bits set. Then in mid 1990s LSI sought a way to improve code density for their TinyRISC family of MIPS cores and invented an alternatively encoded instruction set in a joint effort with MIPS Technologies (then a subsidiary of SGI). The new instruction set has been named the MIPS16 ASE (Application-Specific Extension) and uses a variable instruction word size, which is 2 bytes (as the name of the ASE suggests) for most, but there are a couple of exceptions that take 4 bytes, and then most of the 2-byte instructions can be treated with a 2-byte extension prefix to expand the range of the immediate operands used. As a result instructions are no longer 4-byte aligned, instead they are aligned to a multiple of 2. That left the bit #0 still unused for code references, be it for the standard MIPS (i.e. as originally invented) or for the MIPS16 instruction set, and based on that observation a clever trick was invented that on one hand allowed the processor to be seamlessly switched between the two instruction sets at any time at the run time while on the other avoided the introduction of any special control register to do that. So it is the bit #0 of the instruction address that was chosen as the selector and named the ISA bit. Any instruction executed at an even address is interpreted as a standard MIPS instruction (the address still has to have its bit #1 clear), any instruction executed at an odd address is interpreted as a MIPS16 instruction. To switch between modes ordinary jump instructions are used, such as used for function calls and returns, specifically the bit #0 of the source register used in jump-register instructions selects the execution (ISA) mode for the following piece of code to be interpreted in. Additionally new jump-immediate instructions were added that flipped the ISA bit to select the opposite mode upon execution. They were considered necessary to avoid the need to make register jumps in all cases as the original jump-immediate instructions provided no way to change the bit #0 at all. This was all important for cases where standard MIPS and MIPS16 code had to be mixed, either for compatibility with the existing binary code base or to access resources not reachable from MIPS16 code (the MIPS16 instruction set only provides access to general-purpose registers, and not for example floating-point unit registers or privileged coprocessor 0 registers) -- pieces of code in the opposite mode can be executed as ordinary subroutine calls. A similar approach has been more recently adopted for the MIPS16 replacement instruction set defined as the so called microMIPS ASE. This is another instruction set encoding introduced to the MIPS architecture. Just like the MIPS16 ASE, the microMIPS instruction set uses a variable-length encoding, where each instruction takes a multiple of 2 bytes. The ISA bit has been reused and for microMIPS-capable processors selects between the standard MIPS and the microMIPS mode instead. 2. Statement of the problem To put it shortly, MIPS16 and microMIPS code pointers used by GDB are different to these observed at the run time. This results in the same expressions being evaluated producing different results in GDB and in the program being debugged. Obviously it's the results obtained at the run time that are correct (they define how the program behaves) and therefore by definition the results obtained in GDB are incorrect. A bit longer description will record that obviously at the run time the ISA bit has to be set correctly (refer to background information above if unsure why so) or the program will not run as expected. This is recorded in all the executable file structures used at the run time: the dynamic symbol table (but not always the static one!), the GOT, and obviously in all the addresses embedded in code or data of the program itself, calculated by applying the appropriate relocations at the static link time. While a program is being processed by GDB, the ISA bit is stripped off from any code addresses, presumably to make them the same as the respective raw memory byte address used by the processor to access the instruction in the instruction fetch access cycle. This stripping is actually performed outside GDB proper, in BFD, specifically _bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at the very bottom of that function, starting with an: "If this is an odd-valued function symbol, assume it's a MIPS16 or microMIPS one." comment). This function is also responsible for symbol table dumps made by `objdump' too, so you'll never see the ISA bit reported there by that tool, you need to use `readelf'. This is however unlike what is ever done at the run time, the ISA bit once present is never stripped off, for example a cast like this: (short *) main will not strip the ISA bit off and if the resulting pointer is intended to be used to access instructions as data, for example for software instruction decoding (like for fault recovery or emulation in a signal handler) or for self-modifying code then the bit still has to be stripped off by an explicit AND operation. This is probably best illustrated with a simple real program example. Let's consider the following simple program: $ cat foobar.c int __attribute__ ((mips16)) foo (void) { return 1; } int __attribute__ ((mips16)) bar (void) { return 2; } int __attribute__ ((nomips16)) foo32 (void) { return 3; } int (*foo32p) (void) = foo32; int (*foop) (void) = foo; int fooi = (int) foo; int main (void) { return foop (); } $ This is plain C with no odd tricks, except from the instruction mode attributes. They are not necessary to trigger this problem, I just put them here so that the program can be contained in a single source file and to make it obvious which function is MIPS16 code and which is not. Let's try it with Linux, so that everyone can repeat this experiment: $ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c $ Let's have a look at some interesting symbols: $ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar' Symbol table '.dynsym' contains 7 entries: Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar 68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p 70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop 78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32 80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo 88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi $ Hmm, no sight of the ISA bit, but notice how foo and bar (but not foo32!) have been marked as MIPS16 functions (ELF symbol structure's `st_other' field is used for that). So let's try to run and poke at this program with GDB. I'll be using a native system for simplicity (I'll be using ellipses here and there to remove unrelated clutter): $ ./foobar $ echo $? 1 $ So far, so good. $ gdb ./foobar [...] (gdb) break main Breakpoint 1 at 0x400490: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Yay, it worked! OK, so let's poke at it: (gdb) print main $1 = {int (void)} 0x400490 <main> (gdb) print foo32 $2 = {int (void)} 0x400684 <foo32> (gdb) print foo32p $3 = (int (*)(void)) 0x400684 <foo32> (gdb) print bar $4 = {int (void)} 0x40068c <bar> (gdb) print foo $5 = {int (void)} 0x400680 <foo> (gdb) print foop $6 = (int (*)(void)) 0x400681 <foo> (gdb) A-ha! Here's the difference and finally the ISA bit! (gdb) print /x fooi $7 = 0x400681 (gdb) p/x $pc p/x $pc $8 = 0x400491 (gdb) And here as well... (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 main () at foobar.c:24 24 } Value returned is $9 = 1 (gdb) continue Continuing. [Inferior 1 (process 14103) exited with code 01] (gdb) So let's be a bit inquisitive... (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Actually we do not like to run foo here at all. Let's run bar instead! (gdb) set foop = bar (gdb) print foop $10 = (int (*)(void)) 0x40068c <bar> (gdb) Hmm, no ISA bit. Is it going to work? (gdb) advance bar bar () at foobar.c:9 9 } (gdb) p/x $pc $11 = 0x40068c (gdb) disassemble Dump of assembler code for function bar: => 0x0040068c <+0>: jr ra 0x0040068e <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 Program received signal SIGILL, Illegal instruction. bar () at foobar.c:9 9 } (gdb) Oops! (gdb) p/x $pc $12 = 0x40068c (gdb) We're still there! (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) So let's try something else: (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: => 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 Program received signal SIGILL, Illegal instruction. foo () at foobar.c:4 4 } (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) The same problem! (gdb) run Starting program: /net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo32 (gdb) advance foo32 foo32 () at foobar.c:14 14 } (gdb) disassemble Dump of assembler code for function foo32: => 0x00400684 <+0>: jr ra 0x00400688 <+4>: li v0,3 End of assembler dump. (gdb) finish Run till exit from #0 foo32 () at foobar.c:14 main () at foobar.c:24 24 } Value returned is $14 = 3 (gdb) continue Continuing. [Inferior 1 (process 14113) exited with code 03] (gdb) That did work though, so it's the ISA bit only! (gdb) quit Enough! That's the tip of the iceberg only though. So let's rebuild the executable with some dynamic symbols: $ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c $ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar' Symbol table '.dynsym' contains 32 entries: 6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi $ OK, now the ISA bit is there for a change, but the MIPS16 `st_other' attribute gone, hmm... What does `objdump' do then: $ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar' foobar-dyn: file format elf32-tradbigmips SYMBOL TABLE: 00000000 l df *ABS* 00000000 foobar.c 004009cc g F .text 00000004 0xf0 bar 00410b88 g O .data 00000004 foo32p 00410b84 g O .data 00000004 foop 004009c4 g F .text 00000008 foo32 004009c0 g F .text 00000004 0xf0 foo 00410b80 g O .data 00000004 fooi DYNAMIC SYMBOL TABLE: 004009cc g DF .text 00000004 Base 0xf0 bar 00410b88 g DO .data 00000004 Base foo32p 00410b84 g DO .data 00000004 Base foop 004009c4 g DF .text 00000008 Base foo32 004009c0 g DF .text 00000004 Base 0xf0 foo 00410b80 g DO .data 00000004 Base fooi $ Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone again. Let's have a look at some DWARF-2 records GDB uses (I'll be stripping off a lot here for brevity) -- debug info: $ mips-linux-gnu-readelf -wi foobar Contents of the .debug_info section: [...] Compilation Unit @ offset 0x88: Length: 0xbb (32-bit) Version: 4 Abbrev Offset: 62 Pointer Size: 4 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit) <94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2 <98> DW_AT_language : 1 (ANSI C) <99> DW_AT_name : (indirect string, offset: 0x190): foobar.c <9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...] <a1> DW_AT_ranges : 0x0 <a5> DW_AT_low_pc : 0x0 <a9> DW_AT_stmt_list : 0x27 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram) <ae> DW_AT_external : 1 <ae> DW_AT_name : foo <b2> DW_AT_decl_file : 1 <b3> DW_AT_decl_line : 1 <b4> DW_AT_prototyped : 1 <b4> DW_AT_type : <0xc2> <b8> DW_AT_low_pc : 0x400680 <bc> DW_AT_high_pc : 0x400684 <c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <c2> DW_AT_GNU_all_call_sites: 1 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type) <c3> DW_AT_byte_size : 4 <c4> DW_AT_encoding : 5 (signed) <c5> DW_AT_name : int <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram) <ca> DW_AT_external : 1 <ca> DW_AT_name : (indirect string, offset: 0x18a): foo32 <ce> DW_AT_decl_file : 1 <cf> DW_AT_decl_line : 11 <d0> DW_AT_prototyped : 1 <d0> DW_AT_type : <0xc2> <d4> DW_AT_low_pc : 0x400684 <d8> DW_AT_high_pc : 0x40068c <dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <de> DW_AT_GNU_all_call_sites: 1 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram) <df> DW_AT_external : 1 <df> DW_AT_name : bar <e3> DW_AT_decl_file : 1 <e4> DW_AT_decl_line : 6 <e5> DW_AT_prototyped : 1 <e5> DW_AT_type : <0xc2> <e9> DW_AT_low_pc : 0x40068c <ed> DW_AT_high_pc : 0x400690 <f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <f3> DW_AT_GNU_all_call_sites: 1 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram) <f4> DW_AT_external : 1 <f4> DW_AT_name : (indirect string, offset: 0x199): main <f8> DW_AT_decl_file : 1 <f9> DW_AT_decl_line : 21 <fa> DW_AT_prototyped : 1 <fa> DW_AT_type : <0xc2> <fe> DW_AT_low_pc : 0x400490 <102> DW_AT_high_pc : 0x4004a4 <106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <108> DW_AT_GNU_all_tail_call_sites: 1 [...] $ -- no sign of the ISA bit anywhere -- frame info: $ mips-linux-gnu-readelf -wf foobar [...] Contents of the .debug_frame section: 00000000 0000000c ffffffff CIE Version: 1 Augmentation: "" Code alignment factor: 1 Data alignment factor: -4 Return address column: 31 DW_CFA_def_cfa_register: r29 DW_CFA_nop 00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684 00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c 00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690 00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4 DW_CFA_advance_loc: 6 to 00400496 DW_CFA_def_cfa_offset: 32 DW_CFA_offset: r31 at cfa-4 DW_CFA_advance_loc: 6 to 0040049c DW_CFA_restore: r31 DW_CFA_def_cfa_offset: 0 DW_CFA_nop DW_CFA_nop DW_CFA_nop [...] $ -- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange): $ mips-linux-gnu-readelf -wR foobar Contents of the .debug_ranges section: Offset Begin End 00000000 00400680 00400690 00000000 00400490 004004a4 00000000 <End of list> $ -- no sign of the ISA bit anywhere -- line info: $ mips-linux-gnu-readelf -wl foobar Raw dump of debug contents of section .debug_line: [...] Offset: 0x27 Length: 78 DWARF Version: 2 Prologue Length: 31 Minimum Instruction Length: 1 Initial value of 'is_stmt': 1 Line Base: -5 Line Range: 14 Opcode Base: 13 Opcodes: Opcode 1 has 0 args Opcode 2 has 1 args Opcode 3 has 1 args Opcode 4 has 1 args Opcode 5 has 1 args Opcode 6 has 0 args Opcode 7 has 0 args Opcode 8 has 0 args Opcode 9 has 1 args Opcode 10 has 0 args Opcode 11 has 0 args Opcode 12 has 1 args The Directory Table is empty. The File Name Table: Entry Dir Time Size Name 1 0 0 0 foobar.c Line Number Statements: Extended opcode 2: set Address to 0x400681 Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2 Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4 Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12 Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14 Advance Line by -7 to 7 Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7 Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9 Advance PC by 3 to 0x400690 Extended opcode 1: End of Sequence Extended opcode 2: set Address to 0x400491 Advance Line by 21 to 22 Copy Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23 Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22 Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23 Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24 Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23 Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24 Advance PC by 7 to 0x4004a4 Extended opcode 1: End of Sequence [...] -- a-ha, the ISA bit is there! However it's not always right for some reason, I don't have a small test case to show it, but here's an excerpt from MIPS16 libc, a prologue of a function: 00019630 <__libc_init_first>: 19630: e8a0 jrc ra 19632: 6500 nop 00019634 <_init>: 19634: f000 6a11 li v0,17 19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54> 1963c: f400 3240 sll v0,16 19640: e269 addu v0,v1 19642: 659a move gp,v0 19644: 64f6 save 48,ra,s0-s1 19646: 671c move s0,gp 19648: d204 sw v0,16(sp) 1964a: f352 984c lw v0,-27828(s0) 1964e: 6724 move s1,a0 and the corresponding DWARF-2 line info: Line Number Statements: Extended opcode 2: set Address to 0x19631 Advance Line by 44 to 45 Copy Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48 Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53 Advance PC by constant 17 to 0x19646 Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53 Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53 -- see that "Advance PC by constant 17" there? It clears the ISA bit, however code at 0x19646 is not standard MIPS code at all. For some reason the constant is always 17, I've never seen DW_LNS_const_add_pc used with any other value -- is that a binutils bug or what? 3. Solution: I think we should retain the value of the ISA bit in code references, that is effectively treat them as cookies as they indeed are (although trivially calculated) rather than raw memory byte addresses. In a perfect world both the static symbol table and the respective DWARF-2 records should be fixed to include the ISA bit in all the cases. I think however that this is infeasible. All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be tracked down. This function is used by `elf_slurp_symbol_table' that in turn is used by `bfd_canonicalize_symtab' and `bfd_canonicalize_dynamic_symtab', which are public interfaces. Similarly DWARF-2 records are used outside GDB, one notable if a bit questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have identified at least bits in `execute_cfa_program' and `uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame', that would need an update as they effectively flip the ISA bit freely; see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h. But there may be more places. Any change in how DWARF-2 records are produced would require an update there and would cause compatibility problems with libgcc.a binaries already distributed; given that this is a static library a complex change involving function renames would likely be required. I propose therefore to accept the existing inconsistencies and deal with them entirely within GDB. I have figured out that the ISA bit lost in various places can still be recovered as long as we have symbol information -- that'll have the `st_other' attribute correctly set to one of standard MIPS/MIPS16/microMIPS encoding. Here's the resulting change. It adds a couple of new `gdbarch' hooks, one to update symbol information with the ISA bit lost in `_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2 records as they're processed. The ISA bit is set in each address handled according to information retrieved from the symbol table for the symbol spanning the address if any; limits are adjusted based on the address they point to related to the respective base address. Additionally minimal symbol information has to be adjusted accordingly in its gdbarch hook. With these changes in place some complications with ISA bit juggling in the PC that never fully worked can be removed from the MIPS backend. Conversely, the generic dynamic linker event special breakpoint symbol handler has to be updated to call the minimal symbol gdbarch hook to record that the symbol is a MIPS16 or microMIPS address if applicable or the breakpoint will be set at the wrong address and either fail to work or cause SIGTRAPs (this is because the symbol is handled early on and bypasses regular symbol processing). 4. Results obtained The change fixes the example above -- to repeat only the crucial steps: (gdb) break main Breakpoint 1 at 0x400491: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) print foo $1 = {int (void)} 0x400681 <foo> (gdb) set foop = bar (gdb) advance bar bar () at foobar.c:9 9 } (gdb) disassemble Dump of assembler code for function bar: => 0x0040068d <+0>: jr ra 0x0040068f <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 main () at foobar.c:24 24 } Value returned is $2 = 2 (gdb) continue Continuing. [Inferior 1 (process 14128) exited with code 02] (gdb) -- excellent! The change removes about 90 failures per MIPS16 multilib in mips-sde-elf testing too, results for MIPS16 are now similar to that for standard MIPS; microMIPS results are a bit worse because of host-I/O problems in QEMU used instead of MIPSsim for microMIPS testing only: === gdb Summary === # of expected passes 14299 # of unexpected failures 187 # of expected failures 56 # of known failures 58 # of unresolved testcases 11 # of untested testcases 52 # of unsupported tests 174 MIPS16: === gdb Summary === # of expected passes 14298 # of unexpected failures 187 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 12 # of untested testcases 52 # of unsupported tests 174 microMIPS: === gdb Summary === # of expected passes 14149 # of unexpected failures 201 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 7 # of untested testcases 53 # of unsupported tests 175 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> Maciej W. Rozycki <macro@mips.com> Pedro Alves <pedro@codesourcery.com> gdb/ * gdbarch.sh (elf_make_msymbol_special): Change type to `F', remove `predefault' and `invalid_p' initializers. (make_symbol_special): New architecture method. (adjust_dwarf2_addr, adjust_dwarf2_line): Likewise. (objfile, symbol): New declarations. * arch-utils.h (default_elf_make_msymbol_special): Remove prototype. (default_make_symbol_special): New prototype. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * mips-tdep.h (mips_unmake_compact_addr): New prototype. * arch-utils.c (default_elf_make_msymbol_special): Remove function. (default_make_symbol_special): New function. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * dwarf2-frame.c (decode_frame_entry_1): Call `gdbarch_adjust_dwarf2_addr'. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. Call `gdbarch_make_symbol_special'. (read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'. (read_call_site_scope): Likewise. (dwarf2_ranges_read): Likewise. (dwarf2_record_block_ranges): Likewise. (read_attribute_value): Likewise. (dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'. (new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'. * elfread.c (elf_symtab_read): Don't call `gdbarch_elf_make_msymbol_special' if unset. * mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip the ISA bit from the PC. * mips-tdep.c (mips_unmake_compact_addr): New function. (mips_elf_make_msymbol_special): Set the ISA bit in the symbol's address appropriately. (mips_make_symbol_special): New function. (mips_pc_is_mips): Set the ISA bit before symbol lookup. (mips_pc_is_mips16): Likewise. (mips_pc_is_micromips): Likewise. (mips_pc_isa): Likewise. (mips_adjust_dwarf2_addr): New function. (mips_adjust_dwarf2_line): Likewise. (mips_read_pc, mips_unwind_pc): Keep the ISA bit. (mips_addr_bits_remove): Likewise. (mips_skip_trampoline_code): Likewise. (mips_write_pc): Don't set the ISA bit. (mips_eabi_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. (mips_gdbarch_init): Install `mips_make_symbol_special', `mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch handlers. * solib.c (gdb_bfd_lookup_symbol_from_symtab): Get target-specific symbol address adjustments. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> gdb/testsuite/ * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file.
2014-12-12 14:31:53 +01:00
default_coff_make_msymbol_special (int val, struct minimal_symbol *msym)
{
return;
}
MIPS: Keep the ISA bit in compressed code addresses 1. Background information The MIPS architecture, as originally designed and implemented in mid-1980s has a uniform instruction word size that is 4 bytes, naturally aligned. As such all MIPS instructions are located at addresses that have their bits #1 and #0 set to zeroes, and any attempt to execute an instruction from an address that has any of the two bits set to one causes an address error exception. This may for example happen when a jump-register instruction is executed whose register value used as the jump target has any of these bits set. Then in mid 1990s LSI sought a way to improve code density for their TinyRISC family of MIPS cores and invented an alternatively encoded instruction set in a joint effort with MIPS Technologies (then a subsidiary of SGI). The new instruction set has been named the MIPS16 ASE (Application-Specific Extension) and uses a variable instruction word size, which is 2 bytes (as the name of the ASE suggests) for most, but there are a couple of exceptions that take 4 bytes, and then most of the 2-byte instructions can be treated with a 2-byte extension prefix to expand the range of the immediate operands used. As a result instructions are no longer 4-byte aligned, instead they are aligned to a multiple of 2. That left the bit #0 still unused for code references, be it for the standard MIPS (i.e. as originally invented) or for the MIPS16 instruction set, and based on that observation a clever trick was invented that on one hand allowed the processor to be seamlessly switched between the two instruction sets at any time at the run time while on the other avoided the introduction of any special control register to do that. So it is the bit #0 of the instruction address that was chosen as the selector and named the ISA bit. Any instruction executed at an even address is interpreted as a standard MIPS instruction (the address still has to have its bit #1 clear), any instruction executed at an odd address is interpreted as a MIPS16 instruction. To switch between modes ordinary jump instructions are used, such as used for function calls and returns, specifically the bit #0 of the source register used in jump-register instructions selects the execution (ISA) mode for the following piece of code to be interpreted in. Additionally new jump-immediate instructions were added that flipped the ISA bit to select the opposite mode upon execution. They were considered necessary to avoid the need to make register jumps in all cases as the original jump-immediate instructions provided no way to change the bit #0 at all. This was all important for cases where standard MIPS and MIPS16 code had to be mixed, either for compatibility with the existing binary code base or to access resources not reachable from MIPS16 code (the MIPS16 instruction set only provides access to general-purpose registers, and not for example floating-point unit registers or privileged coprocessor 0 registers) -- pieces of code in the opposite mode can be executed as ordinary subroutine calls. A similar approach has been more recently adopted for the MIPS16 replacement instruction set defined as the so called microMIPS ASE. This is another instruction set encoding introduced to the MIPS architecture. Just like the MIPS16 ASE, the microMIPS instruction set uses a variable-length encoding, where each instruction takes a multiple of 2 bytes. The ISA bit has been reused and for microMIPS-capable processors selects between the standard MIPS and the microMIPS mode instead. 2. Statement of the problem To put it shortly, MIPS16 and microMIPS code pointers used by GDB are different to these observed at the run time. This results in the same expressions being evaluated producing different results in GDB and in the program being debugged. Obviously it's the results obtained at the run time that are correct (they define how the program behaves) and therefore by definition the results obtained in GDB are incorrect. A bit longer description will record that obviously at the run time the ISA bit has to be set correctly (refer to background information above if unsure why so) or the program will not run as expected. This is recorded in all the executable file structures used at the run time: the dynamic symbol table (but not always the static one!), the GOT, and obviously in all the addresses embedded in code or data of the program itself, calculated by applying the appropriate relocations at the static link time. While a program is being processed by GDB, the ISA bit is stripped off from any code addresses, presumably to make them the same as the respective raw memory byte address used by the processor to access the instruction in the instruction fetch access cycle. This stripping is actually performed outside GDB proper, in BFD, specifically _bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at the very bottom of that function, starting with an: "If this is an odd-valued function symbol, assume it's a MIPS16 or microMIPS one." comment). This function is also responsible for symbol table dumps made by `objdump' too, so you'll never see the ISA bit reported there by that tool, you need to use `readelf'. This is however unlike what is ever done at the run time, the ISA bit once present is never stripped off, for example a cast like this: (short *) main will not strip the ISA bit off and if the resulting pointer is intended to be used to access instructions as data, for example for software instruction decoding (like for fault recovery or emulation in a signal handler) or for self-modifying code then the bit still has to be stripped off by an explicit AND operation. This is probably best illustrated with a simple real program example. Let's consider the following simple program: $ cat foobar.c int __attribute__ ((mips16)) foo (void) { return 1; } int __attribute__ ((mips16)) bar (void) { return 2; } int __attribute__ ((nomips16)) foo32 (void) { return 3; } int (*foo32p) (void) = foo32; int (*foop) (void) = foo; int fooi = (int) foo; int main (void) { return foop (); } $ This is plain C with no odd tricks, except from the instruction mode attributes. They are not necessary to trigger this problem, I just put them here so that the program can be contained in a single source file and to make it obvious which function is MIPS16 code and which is not. Let's try it with Linux, so that everyone can repeat this experiment: $ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c $ Let's have a look at some interesting symbols: $ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar' Symbol table '.dynsym' contains 7 entries: Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar 68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p 70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop 78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32 80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo 88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi $ Hmm, no sight of the ISA bit, but notice how foo and bar (but not foo32!) have been marked as MIPS16 functions (ELF symbol structure's `st_other' field is used for that). So let's try to run and poke at this program with GDB. I'll be using a native system for simplicity (I'll be using ellipses here and there to remove unrelated clutter): $ ./foobar $ echo $? 1 $ So far, so good. $ gdb ./foobar [...] (gdb) break main Breakpoint 1 at 0x400490: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Yay, it worked! OK, so let's poke at it: (gdb) print main $1 = {int (void)} 0x400490 <main> (gdb) print foo32 $2 = {int (void)} 0x400684 <foo32> (gdb) print foo32p $3 = (int (*)(void)) 0x400684 <foo32> (gdb) print bar $4 = {int (void)} 0x40068c <bar> (gdb) print foo $5 = {int (void)} 0x400680 <foo> (gdb) print foop $6 = (int (*)(void)) 0x400681 <foo> (gdb) A-ha! Here's the difference and finally the ISA bit! (gdb) print /x fooi $7 = 0x400681 (gdb) p/x $pc p/x $pc $8 = 0x400491 (gdb) And here as well... (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 main () at foobar.c:24 24 } Value returned is $9 = 1 (gdb) continue Continuing. [Inferior 1 (process 14103) exited with code 01] (gdb) So let's be a bit inquisitive... (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Actually we do not like to run foo here at all. Let's run bar instead! (gdb) set foop = bar (gdb) print foop $10 = (int (*)(void)) 0x40068c <bar> (gdb) Hmm, no ISA bit. Is it going to work? (gdb) advance bar bar () at foobar.c:9 9 } (gdb) p/x $pc $11 = 0x40068c (gdb) disassemble Dump of assembler code for function bar: => 0x0040068c <+0>: jr ra 0x0040068e <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 Program received signal SIGILL, Illegal instruction. bar () at foobar.c:9 9 } (gdb) Oops! (gdb) p/x $pc $12 = 0x40068c (gdb) We're still there! (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) So let's try something else: (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: => 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 Program received signal SIGILL, Illegal instruction. foo () at foobar.c:4 4 } (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) The same problem! (gdb) run Starting program: /net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo32 (gdb) advance foo32 foo32 () at foobar.c:14 14 } (gdb) disassemble Dump of assembler code for function foo32: => 0x00400684 <+0>: jr ra 0x00400688 <+4>: li v0,3 End of assembler dump. (gdb) finish Run till exit from #0 foo32 () at foobar.c:14 main () at foobar.c:24 24 } Value returned is $14 = 3 (gdb) continue Continuing. [Inferior 1 (process 14113) exited with code 03] (gdb) That did work though, so it's the ISA bit only! (gdb) quit Enough! That's the tip of the iceberg only though. So let's rebuild the executable with some dynamic symbols: $ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c $ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar' Symbol table '.dynsym' contains 32 entries: 6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi $ OK, now the ISA bit is there for a change, but the MIPS16 `st_other' attribute gone, hmm... What does `objdump' do then: $ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar' foobar-dyn: file format elf32-tradbigmips SYMBOL TABLE: 00000000 l df *ABS* 00000000 foobar.c 004009cc g F .text 00000004 0xf0 bar 00410b88 g O .data 00000004 foo32p 00410b84 g O .data 00000004 foop 004009c4 g F .text 00000008 foo32 004009c0 g F .text 00000004 0xf0 foo 00410b80 g O .data 00000004 fooi DYNAMIC SYMBOL TABLE: 004009cc g DF .text 00000004 Base 0xf0 bar 00410b88 g DO .data 00000004 Base foo32p 00410b84 g DO .data 00000004 Base foop 004009c4 g DF .text 00000008 Base foo32 004009c0 g DF .text 00000004 Base 0xf0 foo 00410b80 g DO .data 00000004 Base fooi $ Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone again. Let's have a look at some DWARF-2 records GDB uses (I'll be stripping off a lot here for brevity) -- debug info: $ mips-linux-gnu-readelf -wi foobar Contents of the .debug_info section: [...] Compilation Unit @ offset 0x88: Length: 0xbb (32-bit) Version: 4 Abbrev Offset: 62 Pointer Size: 4 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit) <94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2 <98> DW_AT_language : 1 (ANSI C) <99> DW_AT_name : (indirect string, offset: 0x190): foobar.c <9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...] <a1> DW_AT_ranges : 0x0 <a5> DW_AT_low_pc : 0x0 <a9> DW_AT_stmt_list : 0x27 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram) <ae> DW_AT_external : 1 <ae> DW_AT_name : foo <b2> DW_AT_decl_file : 1 <b3> DW_AT_decl_line : 1 <b4> DW_AT_prototyped : 1 <b4> DW_AT_type : <0xc2> <b8> DW_AT_low_pc : 0x400680 <bc> DW_AT_high_pc : 0x400684 <c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <c2> DW_AT_GNU_all_call_sites: 1 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type) <c3> DW_AT_byte_size : 4 <c4> DW_AT_encoding : 5 (signed) <c5> DW_AT_name : int <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram) <ca> DW_AT_external : 1 <ca> DW_AT_name : (indirect string, offset: 0x18a): foo32 <ce> DW_AT_decl_file : 1 <cf> DW_AT_decl_line : 11 <d0> DW_AT_prototyped : 1 <d0> DW_AT_type : <0xc2> <d4> DW_AT_low_pc : 0x400684 <d8> DW_AT_high_pc : 0x40068c <dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <de> DW_AT_GNU_all_call_sites: 1 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram) <df> DW_AT_external : 1 <df> DW_AT_name : bar <e3> DW_AT_decl_file : 1 <e4> DW_AT_decl_line : 6 <e5> DW_AT_prototyped : 1 <e5> DW_AT_type : <0xc2> <e9> DW_AT_low_pc : 0x40068c <ed> DW_AT_high_pc : 0x400690 <f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <f3> DW_AT_GNU_all_call_sites: 1 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram) <f4> DW_AT_external : 1 <f4> DW_AT_name : (indirect string, offset: 0x199): main <f8> DW_AT_decl_file : 1 <f9> DW_AT_decl_line : 21 <fa> DW_AT_prototyped : 1 <fa> DW_AT_type : <0xc2> <fe> DW_AT_low_pc : 0x400490 <102> DW_AT_high_pc : 0x4004a4 <106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <108> DW_AT_GNU_all_tail_call_sites: 1 [...] $ -- no sign of the ISA bit anywhere -- frame info: $ mips-linux-gnu-readelf -wf foobar [...] Contents of the .debug_frame section: 00000000 0000000c ffffffff CIE Version: 1 Augmentation: "" Code alignment factor: 1 Data alignment factor: -4 Return address column: 31 DW_CFA_def_cfa_register: r29 DW_CFA_nop 00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684 00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c 00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690 00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4 DW_CFA_advance_loc: 6 to 00400496 DW_CFA_def_cfa_offset: 32 DW_CFA_offset: r31 at cfa-4 DW_CFA_advance_loc: 6 to 0040049c DW_CFA_restore: r31 DW_CFA_def_cfa_offset: 0 DW_CFA_nop DW_CFA_nop DW_CFA_nop [...] $ -- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange): $ mips-linux-gnu-readelf -wR foobar Contents of the .debug_ranges section: Offset Begin End 00000000 00400680 00400690 00000000 00400490 004004a4 00000000 <End of list> $ -- no sign of the ISA bit anywhere -- line info: $ mips-linux-gnu-readelf -wl foobar Raw dump of debug contents of section .debug_line: [...] Offset: 0x27 Length: 78 DWARF Version: 2 Prologue Length: 31 Minimum Instruction Length: 1 Initial value of 'is_stmt': 1 Line Base: -5 Line Range: 14 Opcode Base: 13 Opcodes: Opcode 1 has 0 args Opcode 2 has 1 args Opcode 3 has 1 args Opcode 4 has 1 args Opcode 5 has 1 args Opcode 6 has 0 args Opcode 7 has 0 args Opcode 8 has 0 args Opcode 9 has 1 args Opcode 10 has 0 args Opcode 11 has 0 args Opcode 12 has 1 args The Directory Table is empty. The File Name Table: Entry Dir Time Size Name 1 0 0 0 foobar.c Line Number Statements: Extended opcode 2: set Address to 0x400681 Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2 Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4 Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12 Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14 Advance Line by -7 to 7 Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7 Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9 Advance PC by 3 to 0x400690 Extended opcode 1: End of Sequence Extended opcode 2: set Address to 0x400491 Advance Line by 21 to 22 Copy Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23 Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22 Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23 Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24 Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23 Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24 Advance PC by 7 to 0x4004a4 Extended opcode 1: End of Sequence [...] -- a-ha, the ISA bit is there! However it's not always right for some reason, I don't have a small test case to show it, but here's an excerpt from MIPS16 libc, a prologue of a function: 00019630 <__libc_init_first>: 19630: e8a0 jrc ra 19632: 6500 nop 00019634 <_init>: 19634: f000 6a11 li v0,17 19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54> 1963c: f400 3240 sll v0,16 19640: e269 addu v0,v1 19642: 659a move gp,v0 19644: 64f6 save 48,ra,s0-s1 19646: 671c move s0,gp 19648: d204 sw v0,16(sp) 1964a: f352 984c lw v0,-27828(s0) 1964e: 6724 move s1,a0 and the corresponding DWARF-2 line info: Line Number Statements: Extended opcode 2: set Address to 0x19631 Advance Line by 44 to 45 Copy Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48 Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53 Advance PC by constant 17 to 0x19646 Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53 Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53 -- see that "Advance PC by constant 17" there? It clears the ISA bit, however code at 0x19646 is not standard MIPS code at all. For some reason the constant is always 17, I've never seen DW_LNS_const_add_pc used with any other value -- is that a binutils bug or what? 3. Solution: I think we should retain the value of the ISA bit in code references, that is effectively treat them as cookies as they indeed are (although trivially calculated) rather than raw memory byte addresses. In a perfect world both the static symbol table and the respective DWARF-2 records should be fixed to include the ISA bit in all the cases. I think however that this is infeasible. All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be tracked down. This function is used by `elf_slurp_symbol_table' that in turn is used by `bfd_canonicalize_symtab' and `bfd_canonicalize_dynamic_symtab', which are public interfaces. Similarly DWARF-2 records are used outside GDB, one notable if a bit questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have identified at least bits in `execute_cfa_program' and `uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame', that would need an update as they effectively flip the ISA bit freely; see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h. But there may be more places. Any change in how DWARF-2 records are produced would require an update there and would cause compatibility problems with libgcc.a binaries already distributed; given that this is a static library a complex change involving function renames would likely be required. I propose therefore to accept the existing inconsistencies and deal with them entirely within GDB. I have figured out that the ISA bit lost in various places can still be recovered as long as we have symbol information -- that'll have the `st_other' attribute correctly set to one of standard MIPS/MIPS16/microMIPS encoding. Here's the resulting change. It adds a couple of new `gdbarch' hooks, one to update symbol information with the ISA bit lost in `_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2 records as they're processed. The ISA bit is set in each address handled according to information retrieved from the symbol table for the symbol spanning the address if any; limits are adjusted based on the address they point to related to the respective base address. Additionally minimal symbol information has to be adjusted accordingly in its gdbarch hook. With these changes in place some complications with ISA bit juggling in the PC that never fully worked can be removed from the MIPS backend. Conversely, the generic dynamic linker event special breakpoint symbol handler has to be updated to call the minimal symbol gdbarch hook to record that the symbol is a MIPS16 or microMIPS address if applicable or the breakpoint will be set at the wrong address and either fail to work or cause SIGTRAPs (this is because the symbol is handled early on and bypasses regular symbol processing). 4. Results obtained The change fixes the example above -- to repeat only the crucial steps: (gdb) break main Breakpoint 1 at 0x400491: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) print foo $1 = {int (void)} 0x400681 <foo> (gdb) set foop = bar (gdb) advance bar bar () at foobar.c:9 9 } (gdb) disassemble Dump of assembler code for function bar: => 0x0040068d <+0>: jr ra 0x0040068f <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 main () at foobar.c:24 24 } Value returned is $2 = 2 (gdb) continue Continuing. [Inferior 1 (process 14128) exited with code 02] (gdb) -- excellent! The change removes about 90 failures per MIPS16 multilib in mips-sde-elf testing too, results for MIPS16 are now similar to that for standard MIPS; microMIPS results are a bit worse because of host-I/O problems in QEMU used instead of MIPSsim for microMIPS testing only: === gdb Summary === # of expected passes 14299 # of unexpected failures 187 # of expected failures 56 # of known failures 58 # of unresolved testcases 11 # of untested testcases 52 # of unsupported tests 174 MIPS16: === gdb Summary === # of expected passes 14298 # of unexpected failures 187 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 12 # of untested testcases 52 # of unsupported tests 174 microMIPS: === gdb Summary === # of expected passes 14149 # of unexpected failures 201 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 7 # of untested testcases 53 # of unsupported tests 175 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> Maciej W. Rozycki <macro@mips.com> Pedro Alves <pedro@codesourcery.com> gdb/ * gdbarch.sh (elf_make_msymbol_special): Change type to `F', remove `predefault' and `invalid_p' initializers. (make_symbol_special): New architecture method. (adjust_dwarf2_addr, adjust_dwarf2_line): Likewise. (objfile, symbol): New declarations. * arch-utils.h (default_elf_make_msymbol_special): Remove prototype. (default_make_symbol_special): New prototype. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * mips-tdep.h (mips_unmake_compact_addr): New prototype. * arch-utils.c (default_elf_make_msymbol_special): Remove function. (default_make_symbol_special): New function. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * dwarf2-frame.c (decode_frame_entry_1): Call `gdbarch_adjust_dwarf2_addr'. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. Call `gdbarch_make_symbol_special'. (read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'. (read_call_site_scope): Likewise. (dwarf2_ranges_read): Likewise. (dwarf2_record_block_ranges): Likewise. (read_attribute_value): Likewise. (dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'. (new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'. * elfread.c (elf_symtab_read): Don't call `gdbarch_elf_make_msymbol_special' if unset. * mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip the ISA bit from the PC. * mips-tdep.c (mips_unmake_compact_addr): New function. (mips_elf_make_msymbol_special): Set the ISA bit in the symbol's address appropriately. (mips_make_symbol_special): New function. (mips_pc_is_mips): Set the ISA bit before symbol lookup. (mips_pc_is_mips16): Likewise. (mips_pc_is_micromips): Likewise. (mips_pc_isa): Likewise. (mips_adjust_dwarf2_addr): New function. (mips_adjust_dwarf2_line): Likewise. (mips_read_pc, mips_unwind_pc): Keep the ISA bit. (mips_addr_bits_remove): Likewise. (mips_skip_trampoline_code): Likewise. (mips_write_pc): Don't set the ISA bit. (mips_eabi_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. (mips_gdbarch_init): Install `mips_make_symbol_special', `mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch handlers. * solib.c (gdb_bfd_lookup_symbol_from_symtab): Get target-specific symbol address adjustments. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> gdb/testsuite/ * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file.
2014-12-12 14:31:53 +01:00
/* See arch-utils.h. */
void
MIPS: Keep the ISA bit in compressed code addresses 1. Background information The MIPS architecture, as originally designed and implemented in mid-1980s has a uniform instruction word size that is 4 bytes, naturally aligned. As such all MIPS instructions are located at addresses that have their bits #1 and #0 set to zeroes, and any attempt to execute an instruction from an address that has any of the two bits set to one causes an address error exception. This may for example happen when a jump-register instruction is executed whose register value used as the jump target has any of these bits set. Then in mid 1990s LSI sought a way to improve code density for their TinyRISC family of MIPS cores and invented an alternatively encoded instruction set in a joint effort with MIPS Technologies (then a subsidiary of SGI). The new instruction set has been named the MIPS16 ASE (Application-Specific Extension) and uses a variable instruction word size, which is 2 bytes (as the name of the ASE suggests) for most, but there are a couple of exceptions that take 4 bytes, and then most of the 2-byte instructions can be treated with a 2-byte extension prefix to expand the range of the immediate operands used. As a result instructions are no longer 4-byte aligned, instead they are aligned to a multiple of 2. That left the bit #0 still unused for code references, be it for the standard MIPS (i.e. as originally invented) or for the MIPS16 instruction set, and based on that observation a clever trick was invented that on one hand allowed the processor to be seamlessly switched between the two instruction sets at any time at the run time while on the other avoided the introduction of any special control register to do that. So it is the bit #0 of the instruction address that was chosen as the selector and named the ISA bit. Any instruction executed at an even address is interpreted as a standard MIPS instruction (the address still has to have its bit #1 clear), any instruction executed at an odd address is interpreted as a MIPS16 instruction. To switch between modes ordinary jump instructions are used, such as used for function calls and returns, specifically the bit #0 of the source register used in jump-register instructions selects the execution (ISA) mode for the following piece of code to be interpreted in. Additionally new jump-immediate instructions were added that flipped the ISA bit to select the opposite mode upon execution. They were considered necessary to avoid the need to make register jumps in all cases as the original jump-immediate instructions provided no way to change the bit #0 at all. This was all important for cases where standard MIPS and MIPS16 code had to be mixed, either for compatibility with the existing binary code base or to access resources not reachable from MIPS16 code (the MIPS16 instruction set only provides access to general-purpose registers, and not for example floating-point unit registers or privileged coprocessor 0 registers) -- pieces of code in the opposite mode can be executed as ordinary subroutine calls. A similar approach has been more recently adopted for the MIPS16 replacement instruction set defined as the so called microMIPS ASE. This is another instruction set encoding introduced to the MIPS architecture. Just like the MIPS16 ASE, the microMIPS instruction set uses a variable-length encoding, where each instruction takes a multiple of 2 bytes. The ISA bit has been reused and for microMIPS-capable processors selects between the standard MIPS and the microMIPS mode instead. 2. Statement of the problem To put it shortly, MIPS16 and microMIPS code pointers used by GDB are different to these observed at the run time. This results in the same expressions being evaluated producing different results in GDB and in the program being debugged. Obviously it's the results obtained at the run time that are correct (they define how the program behaves) and therefore by definition the results obtained in GDB are incorrect. A bit longer description will record that obviously at the run time the ISA bit has to be set correctly (refer to background information above if unsure why so) or the program will not run as expected. This is recorded in all the executable file structures used at the run time: the dynamic symbol table (but not always the static one!), the GOT, and obviously in all the addresses embedded in code or data of the program itself, calculated by applying the appropriate relocations at the static link time. While a program is being processed by GDB, the ISA bit is stripped off from any code addresses, presumably to make them the same as the respective raw memory byte address used by the processor to access the instruction in the instruction fetch access cycle. This stripping is actually performed outside GDB proper, in BFD, specifically _bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at the very bottom of that function, starting with an: "If this is an odd-valued function symbol, assume it's a MIPS16 or microMIPS one." comment). This function is also responsible for symbol table dumps made by `objdump' too, so you'll never see the ISA bit reported there by that tool, you need to use `readelf'. This is however unlike what is ever done at the run time, the ISA bit once present is never stripped off, for example a cast like this: (short *) main will not strip the ISA bit off and if the resulting pointer is intended to be used to access instructions as data, for example for software instruction decoding (like for fault recovery or emulation in a signal handler) or for self-modifying code then the bit still has to be stripped off by an explicit AND operation. This is probably best illustrated with a simple real program example. Let's consider the following simple program: $ cat foobar.c int __attribute__ ((mips16)) foo (void) { return 1; } int __attribute__ ((mips16)) bar (void) { return 2; } int __attribute__ ((nomips16)) foo32 (void) { return 3; } int (*foo32p) (void) = foo32; int (*foop) (void) = foo; int fooi = (int) foo; int main (void) { return foop (); } $ This is plain C with no odd tricks, except from the instruction mode attributes. They are not necessary to trigger this problem, I just put them here so that the program can be contained in a single source file and to make it obvious which function is MIPS16 code and which is not. Let's try it with Linux, so that everyone can repeat this experiment: $ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c $ Let's have a look at some interesting symbols: $ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar' Symbol table '.dynsym' contains 7 entries: Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar 68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p 70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop 78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32 80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo 88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi $ Hmm, no sight of the ISA bit, but notice how foo and bar (but not foo32!) have been marked as MIPS16 functions (ELF symbol structure's `st_other' field is used for that). So let's try to run and poke at this program with GDB. I'll be using a native system for simplicity (I'll be using ellipses here and there to remove unrelated clutter): $ ./foobar $ echo $? 1 $ So far, so good. $ gdb ./foobar [...] (gdb) break main Breakpoint 1 at 0x400490: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Yay, it worked! OK, so let's poke at it: (gdb) print main $1 = {int (void)} 0x400490 <main> (gdb) print foo32 $2 = {int (void)} 0x400684 <foo32> (gdb) print foo32p $3 = (int (*)(void)) 0x400684 <foo32> (gdb) print bar $4 = {int (void)} 0x40068c <bar> (gdb) print foo $5 = {int (void)} 0x400680 <foo> (gdb) print foop $6 = (int (*)(void)) 0x400681 <foo> (gdb) A-ha! Here's the difference and finally the ISA bit! (gdb) print /x fooi $7 = 0x400681 (gdb) p/x $pc p/x $pc $8 = 0x400491 (gdb) And here as well... (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 main () at foobar.c:24 24 } Value returned is $9 = 1 (gdb) continue Continuing. [Inferior 1 (process 14103) exited with code 01] (gdb) So let's be a bit inquisitive... (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Actually we do not like to run foo here at all. Let's run bar instead! (gdb) set foop = bar (gdb) print foop $10 = (int (*)(void)) 0x40068c <bar> (gdb) Hmm, no ISA bit. Is it going to work? (gdb) advance bar bar () at foobar.c:9 9 } (gdb) p/x $pc $11 = 0x40068c (gdb) disassemble Dump of assembler code for function bar: => 0x0040068c <+0>: jr ra 0x0040068e <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 Program received signal SIGILL, Illegal instruction. bar () at foobar.c:9 9 } (gdb) Oops! (gdb) p/x $pc $12 = 0x40068c (gdb) We're still there! (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) So let's try something else: (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: => 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 Program received signal SIGILL, Illegal instruction. foo () at foobar.c:4 4 } (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) The same problem! (gdb) run Starting program: /net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo32 (gdb) advance foo32 foo32 () at foobar.c:14 14 } (gdb) disassemble Dump of assembler code for function foo32: => 0x00400684 <+0>: jr ra 0x00400688 <+4>: li v0,3 End of assembler dump. (gdb) finish Run till exit from #0 foo32 () at foobar.c:14 main () at foobar.c:24 24 } Value returned is $14 = 3 (gdb) continue Continuing. [Inferior 1 (process 14113) exited with code 03] (gdb) That did work though, so it's the ISA bit only! (gdb) quit Enough! That's the tip of the iceberg only though. So let's rebuild the executable with some dynamic symbols: $ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c $ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar' Symbol table '.dynsym' contains 32 entries: 6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi $ OK, now the ISA bit is there for a change, but the MIPS16 `st_other' attribute gone, hmm... What does `objdump' do then: $ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar' foobar-dyn: file format elf32-tradbigmips SYMBOL TABLE: 00000000 l df *ABS* 00000000 foobar.c 004009cc g F .text 00000004 0xf0 bar 00410b88 g O .data 00000004 foo32p 00410b84 g O .data 00000004 foop 004009c4 g F .text 00000008 foo32 004009c0 g F .text 00000004 0xf0 foo 00410b80 g O .data 00000004 fooi DYNAMIC SYMBOL TABLE: 004009cc g DF .text 00000004 Base 0xf0 bar 00410b88 g DO .data 00000004 Base foo32p 00410b84 g DO .data 00000004 Base foop 004009c4 g DF .text 00000008 Base foo32 004009c0 g DF .text 00000004 Base 0xf0 foo 00410b80 g DO .data 00000004 Base fooi $ Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone again. Let's have a look at some DWARF-2 records GDB uses (I'll be stripping off a lot here for brevity) -- debug info: $ mips-linux-gnu-readelf -wi foobar Contents of the .debug_info section: [...] Compilation Unit @ offset 0x88: Length: 0xbb (32-bit) Version: 4 Abbrev Offset: 62 Pointer Size: 4 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit) <94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2 <98> DW_AT_language : 1 (ANSI C) <99> DW_AT_name : (indirect string, offset: 0x190): foobar.c <9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...] <a1> DW_AT_ranges : 0x0 <a5> DW_AT_low_pc : 0x0 <a9> DW_AT_stmt_list : 0x27 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram) <ae> DW_AT_external : 1 <ae> DW_AT_name : foo <b2> DW_AT_decl_file : 1 <b3> DW_AT_decl_line : 1 <b4> DW_AT_prototyped : 1 <b4> DW_AT_type : <0xc2> <b8> DW_AT_low_pc : 0x400680 <bc> DW_AT_high_pc : 0x400684 <c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <c2> DW_AT_GNU_all_call_sites: 1 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type) <c3> DW_AT_byte_size : 4 <c4> DW_AT_encoding : 5 (signed) <c5> DW_AT_name : int <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram) <ca> DW_AT_external : 1 <ca> DW_AT_name : (indirect string, offset: 0x18a): foo32 <ce> DW_AT_decl_file : 1 <cf> DW_AT_decl_line : 11 <d0> DW_AT_prototyped : 1 <d0> DW_AT_type : <0xc2> <d4> DW_AT_low_pc : 0x400684 <d8> DW_AT_high_pc : 0x40068c <dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <de> DW_AT_GNU_all_call_sites: 1 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram) <df> DW_AT_external : 1 <df> DW_AT_name : bar <e3> DW_AT_decl_file : 1 <e4> DW_AT_decl_line : 6 <e5> DW_AT_prototyped : 1 <e5> DW_AT_type : <0xc2> <e9> DW_AT_low_pc : 0x40068c <ed> DW_AT_high_pc : 0x400690 <f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <f3> DW_AT_GNU_all_call_sites: 1 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram) <f4> DW_AT_external : 1 <f4> DW_AT_name : (indirect string, offset: 0x199): main <f8> DW_AT_decl_file : 1 <f9> DW_AT_decl_line : 21 <fa> DW_AT_prototyped : 1 <fa> DW_AT_type : <0xc2> <fe> DW_AT_low_pc : 0x400490 <102> DW_AT_high_pc : 0x4004a4 <106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <108> DW_AT_GNU_all_tail_call_sites: 1 [...] $ -- no sign of the ISA bit anywhere -- frame info: $ mips-linux-gnu-readelf -wf foobar [...] Contents of the .debug_frame section: 00000000 0000000c ffffffff CIE Version: 1 Augmentation: "" Code alignment factor: 1 Data alignment factor: -4 Return address column: 31 DW_CFA_def_cfa_register: r29 DW_CFA_nop 00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684 00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c 00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690 00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4 DW_CFA_advance_loc: 6 to 00400496 DW_CFA_def_cfa_offset: 32 DW_CFA_offset: r31 at cfa-4 DW_CFA_advance_loc: 6 to 0040049c DW_CFA_restore: r31 DW_CFA_def_cfa_offset: 0 DW_CFA_nop DW_CFA_nop DW_CFA_nop [...] $ -- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange): $ mips-linux-gnu-readelf -wR foobar Contents of the .debug_ranges section: Offset Begin End 00000000 00400680 00400690 00000000 00400490 004004a4 00000000 <End of list> $ -- no sign of the ISA bit anywhere -- line info: $ mips-linux-gnu-readelf -wl foobar Raw dump of debug contents of section .debug_line: [...] Offset: 0x27 Length: 78 DWARF Version: 2 Prologue Length: 31 Minimum Instruction Length: 1 Initial value of 'is_stmt': 1 Line Base: -5 Line Range: 14 Opcode Base: 13 Opcodes: Opcode 1 has 0 args Opcode 2 has 1 args Opcode 3 has 1 args Opcode 4 has 1 args Opcode 5 has 1 args Opcode 6 has 0 args Opcode 7 has 0 args Opcode 8 has 0 args Opcode 9 has 1 args Opcode 10 has 0 args Opcode 11 has 0 args Opcode 12 has 1 args The Directory Table is empty. The File Name Table: Entry Dir Time Size Name 1 0 0 0 foobar.c Line Number Statements: Extended opcode 2: set Address to 0x400681 Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2 Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4 Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12 Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14 Advance Line by -7 to 7 Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7 Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9 Advance PC by 3 to 0x400690 Extended opcode 1: End of Sequence Extended opcode 2: set Address to 0x400491 Advance Line by 21 to 22 Copy Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23 Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22 Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23 Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24 Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23 Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24 Advance PC by 7 to 0x4004a4 Extended opcode 1: End of Sequence [...] -- a-ha, the ISA bit is there! However it's not always right for some reason, I don't have a small test case to show it, but here's an excerpt from MIPS16 libc, a prologue of a function: 00019630 <__libc_init_first>: 19630: e8a0 jrc ra 19632: 6500 nop 00019634 <_init>: 19634: f000 6a11 li v0,17 19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54> 1963c: f400 3240 sll v0,16 19640: e269 addu v0,v1 19642: 659a move gp,v0 19644: 64f6 save 48,ra,s0-s1 19646: 671c move s0,gp 19648: d204 sw v0,16(sp) 1964a: f352 984c lw v0,-27828(s0) 1964e: 6724 move s1,a0 and the corresponding DWARF-2 line info: Line Number Statements: Extended opcode 2: set Address to 0x19631 Advance Line by 44 to 45 Copy Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48 Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53 Advance PC by constant 17 to 0x19646 Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53 Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53 -- see that "Advance PC by constant 17" there? It clears the ISA bit, however code at 0x19646 is not standard MIPS code at all. For some reason the constant is always 17, I've never seen DW_LNS_const_add_pc used with any other value -- is that a binutils bug or what? 3. Solution: I think we should retain the value of the ISA bit in code references, that is effectively treat them as cookies as they indeed are (although trivially calculated) rather than raw memory byte addresses. In a perfect world both the static symbol table and the respective DWARF-2 records should be fixed to include the ISA bit in all the cases. I think however that this is infeasible. All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be tracked down. This function is used by `elf_slurp_symbol_table' that in turn is used by `bfd_canonicalize_symtab' and `bfd_canonicalize_dynamic_symtab', which are public interfaces. Similarly DWARF-2 records are used outside GDB, one notable if a bit questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have identified at least bits in `execute_cfa_program' and `uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame', that would need an update as they effectively flip the ISA bit freely; see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h. But there may be more places. Any change in how DWARF-2 records are produced would require an update there and would cause compatibility problems with libgcc.a binaries already distributed; given that this is a static library a complex change involving function renames would likely be required. I propose therefore to accept the existing inconsistencies and deal with them entirely within GDB. I have figured out that the ISA bit lost in various places can still be recovered as long as we have symbol information -- that'll have the `st_other' attribute correctly set to one of standard MIPS/MIPS16/microMIPS encoding. Here's the resulting change. It adds a couple of new `gdbarch' hooks, one to update symbol information with the ISA bit lost in `_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2 records as they're processed. The ISA bit is set in each address handled according to information retrieved from the symbol table for the symbol spanning the address if any; limits are adjusted based on the address they point to related to the respective base address. Additionally minimal symbol information has to be adjusted accordingly in its gdbarch hook. With these changes in place some complications with ISA bit juggling in the PC that never fully worked can be removed from the MIPS backend. Conversely, the generic dynamic linker event special breakpoint symbol handler has to be updated to call the minimal symbol gdbarch hook to record that the symbol is a MIPS16 or microMIPS address if applicable or the breakpoint will be set at the wrong address and either fail to work or cause SIGTRAPs (this is because the symbol is handled early on and bypasses regular symbol processing). 4. Results obtained The change fixes the example above -- to repeat only the crucial steps: (gdb) break main Breakpoint 1 at 0x400491: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) print foo $1 = {int (void)} 0x400681 <foo> (gdb) set foop = bar (gdb) advance bar bar () at foobar.c:9 9 } (gdb) disassemble Dump of assembler code for function bar: => 0x0040068d <+0>: jr ra 0x0040068f <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 main () at foobar.c:24 24 } Value returned is $2 = 2 (gdb) continue Continuing. [Inferior 1 (process 14128) exited with code 02] (gdb) -- excellent! The change removes about 90 failures per MIPS16 multilib in mips-sde-elf testing too, results for MIPS16 are now similar to that for standard MIPS; microMIPS results are a bit worse because of host-I/O problems in QEMU used instead of MIPSsim for microMIPS testing only: === gdb Summary === # of expected passes 14299 # of unexpected failures 187 # of expected failures 56 # of known failures 58 # of unresolved testcases 11 # of untested testcases 52 # of unsupported tests 174 MIPS16: === gdb Summary === # of expected passes 14298 # of unexpected failures 187 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 12 # of untested testcases 52 # of unsupported tests 174 microMIPS: === gdb Summary === # of expected passes 14149 # of unexpected failures 201 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 7 # of untested testcases 53 # of unsupported tests 175 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> Maciej W. Rozycki <macro@mips.com> Pedro Alves <pedro@codesourcery.com> gdb/ * gdbarch.sh (elf_make_msymbol_special): Change type to `F', remove `predefault' and `invalid_p' initializers. (make_symbol_special): New architecture method. (adjust_dwarf2_addr, adjust_dwarf2_line): Likewise. (objfile, symbol): New declarations. * arch-utils.h (default_elf_make_msymbol_special): Remove prototype. (default_make_symbol_special): New prototype. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * mips-tdep.h (mips_unmake_compact_addr): New prototype. * arch-utils.c (default_elf_make_msymbol_special): Remove function. (default_make_symbol_special): New function. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * dwarf2-frame.c (decode_frame_entry_1): Call `gdbarch_adjust_dwarf2_addr'. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. Call `gdbarch_make_symbol_special'. (read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'. (read_call_site_scope): Likewise. (dwarf2_ranges_read): Likewise. (dwarf2_record_block_ranges): Likewise. (read_attribute_value): Likewise. (dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'. (new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'. * elfread.c (elf_symtab_read): Don't call `gdbarch_elf_make_msymbol_special' if unset. * mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip the ISA bit from the PC. * mips-tdep.c (mips_unmake_compact_addr): New function. (mips_elf_make_msymbol_special): Set the ISA bit in the symbol's address appropriately. (mips_make_symbol_special): New function. (mips_pc_is_mips): Set the ISA bit before symbol lookup. (mips_pc_is_mips16): Likewise. (mips_pc_is_micromips): Likewise. (mips_pc_isa): Likewise. (mips_adjust_dwarf2_addr): New function. (mips_adjust_dwarf2_line): Likewise. (mips_read_pc, mips_unwind_pc): Keep the ISA bit. (mips_addr_bits_remove): Likewise. (mips_skip_trampoline_code): Likewise. (mips_write_pc): Don't set the ISA bit. (mips_eabi_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. (mips_gdbarch_init): Install `mips_make_symbol_special', `mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch handlers. * solib.c (gdb_bfd_lookup_symbol_from_symtab): Get target-specific symbol address adjustments. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> gdb/testsuite/ * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file.
2014-12-12 14:31:53 +01:00
default_make_symbol_special (struct symbol *sym, struct objfile *objfile)
{
return;
}
MIPS: Keep the ISA bit in compressed code addresses 1. Background information The MIPS architecture, as originally designed and implemented in mid-1980s has a uniform instruction word size that is 4 bytes, naturally aligned. As such all MIPS instructions are located at addresses that have their bits #1 and #0 set to zeroes, and any attempt to execute an instruction from an address that has any of the two bits set to one causes an address error exception. This may for example happen when a jump-register instruction is executed whose register value used as the jump target has any of these bits set. Then in mid 1990s LSI sought a way to improve code density for their TinyRISC family of MIPS cores and invented an alternatively encoded instruction set in a joint effort with MIPS Technologies (then a subsidiary of SGI). The new instruction set has been named the MIPS16 ASE (Application-Specific Extension) and uses a variable instruction word size, which is 2 bytes (as the name of the ASE suggests) for most, but there are a couple of exceptions that take 4 bytes, and then most of the 2-byte instructions can be treated with a 2-byte extension prefix to expand the range of the immediate operands used. As a result instructions are no longer 4-byte aligned, instead they are aligned to a multiple of 2. That left the bit #0 still unused for code references, be it for the standard MIPS (i.e. as originally invented) or for the MIPS16 instruction set, and based on that observation a clever trick was invented that on one hand allowed the processor to be seamlessly switched between the two instruction sets at any time at the run time while on the other avoided the introduction of any special control register to do that. So it is the bit #0 of the instruction address that was chosen as the selector and named the ISA bit. Any instruction executed at an even address is interpreted as a standard MIPS instruction (the address still has to have its bit #1 clear), any instruction executed at an odd address is interpreted as a MIPS16 instruction. To switch between modes ordinary jump instructions are used, such as used for function calls and returns, specifically the bit #0 of the source register used in jump-register instructions selects the execution (ISA) mode for the following piece of code to be interpreted in. Additionally new jump-immediate instructions were added that flipped the ISA bit to select the opposite mode upon execution. They were considered necessary to avoid the need to make register jumps in all cases as the original jump-immediate instructions provided no way to change the bit #0 at all. This was all important for cases where standard MIPS and MIPS16 code had to be mixed, either for compatibility with the existing binary code base or to access resources not reachable from MIPS16 code (the MIPS16 instruction set only provides access to general-purpose registers, and not for example floating-point unit registers or privileged coprocessor 0 registers) -- pieces of code in the opposite mode can be executed as ordinary subroutine calls. A similar approach has been more recently adopted for the MIPS16 replacement instruction set defined as the so called microMIPS ASE. This is another instruction set encoding introduced to the MIPS architecture. Just like the MIPS16 ASE, the microMIPS instruction set uses a variable-length encoding, where each instruction takes a multiple of 2 bytes. The ISA bit has been reused and for microMIPS-capable processors selects between the standard MIPS and the microMIPS mode instead. 2. Statement of the problem To put it shortly, MIPS16 and microMIPS code pointers used by GDB are different to these observed at the run time. This results in the same expressions being evaluated producing different results in GDB and in the program being debugged. Obviously it's the results obtained at the run time that are correct (they define how the program behaves) and therefore by definition the results obtained in GDB are incorrect. A bit longer description will record that obviously at the run time the ISA bit has to be set correctly (refer to background information above if unsure why so) or the program will not run as expected. This is recorded in all the executable file structures used at the run time: the dynamic symbol table (but not always the static one!), the GOT, and obviously in all the addresses embedded in code or data of the program itself, calculated by applying the appropriate relocations at the static link time. While a program is being processed by GDB, the ISA bit is stripped off from any code addresses, presumably to make them the same as the respective raw memory byte address used by the processor to access the instruction in the instruction fetch access cycle. This stripping is actually performed outside GDB proper, in BFD, specifically _bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at the very bottom of that function, starting with an: "If this is an odd-valued function symbol, assume it's a MIPS16 or microMIPS one." comment). This function is also responsible for symbol table dumps made by `objdump' too, so you'll never see the ISA bit reported there by that tool, you need to use `readelf'. This is however unlike what is ever done at the run time, the ISA bit once present is never stripped off, for example a cast like this: (short *) main will not strip the ISA bit off and if the resulting pointer is intended to be used to access instructions as data, for example for software instruction decoding (like for fault recovery or emulation in a signal handler) or for self-modifying code then the bit still has to be stripped off by an explicit AND operation. This is probably best illustrated with a simple real program example. Let's consider the following simple program: $ cat foobar.c int __attribute__ ((mips16)) foo (void) { return 1; } int __attribute__ ((mips16)) bar (void) { return 2; } int __attribute__ ((nomips16)) foo32 (void) { return 3; } int (*foo32p) (void) = foo32; int (*foop) (void) = foo; int fooi = (int) foo; int main (void) { return foop (); } $ This is plain C with no odd tricks, except from the instruction mode attributes. They are not necessary to trigger this problem, I just put them here so that the program can be contained in a single source file and to make it obvious which function is MIPS16 code and which is not. Let's try it with Linux, so that everyone can repeat this experiment: $ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c $ Let's have a look at some interesting symbols: $ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar' Symbol table '.dynsym' contains 7 entries: Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar 68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p 70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop 78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32 80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo 88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi $ Hmm, no sight of the ISA bit, but notice how foo and bar (but not foo32!) have been marked as MIPS16 functions (ELF symbol structure's `st_other' field is used for that). So let's try to run and poke at this program with GDB. I'll be using a native system for simplicity (I'll be using ellipses here and there to remove unrelated clutter): $ ./foobar $ echo $? 1 $ So far, so good. $ gdb ./foobar [...] (gdb) break main Breakpoint 1 at 0x400490: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Yay, it worked! OK, so let's poke at it: (gdb) print main $1 = {int (void)} 0x400490 <main> (gdb) print foo32 $2 = {int (void)} 0x400684 <foo32> (gdb) print foo32p $3 = (int (*)(void)) 0x400684 <foo32> (gdb) print bar $4 = {int (void)} 0x40068c <bar> (gdb) print foo $5 = {int (void)} 0x400680 <foo> (gdb) print foop $6 = (int (*)(void)) 0x400681 <foo> (gdb) A-ha! Here's the difference and finally the ISA bit! (gdb) print /x fooi $7 = 0x400681 (gdb) p/x $pc p/x $pc $8 = 0x400491 (gdb) And here as well... (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 main () at foobar.c:24 24 } Value returned is $9 = 1 (gdb) continue Continuing. [Inferior 1 (process 14103) exited with code 01] (gdb) So let's be a bit inquisitive... (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) Actually we do not like to run foo here at all. Let's run bar instead! (gdb) set foop = bar (gdb) print foop $10 = (int (*)(void)) 0x40068c <bar> (gdb) Hmm, no ISA bit. Is it going to work? (gdb) advance bar bar () at foobar.c:9 9 } (gdb) p/x $pc $11 = 0x40068c (gdb) disassemble Dump of assembler code for function bar: => 0x0040068c <+0>: jr ra 0x0040068e <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 Program received signal SIGILL, Illegal instruction. bar () at foobar.c:9 9 } (gdb) Oops! (gdb) p/x $pc $12 = 0x40068c (gdb) We're still there! (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) So let's try something else: (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo (gdb) advance foo foo () at foobar.c:4 4 } (gdb) disassemble Dump of assembler code for function foo: => 0x00400680 <+0>: jr ra 0x00400682 <+2>: li v0,1 End of assembler dump. (gdb) finish Run till exit from #0 foo () at foobar.c:4 Program received signal SIGILL, Illegal instruction. foo () at foobar.c:4 4 } (gdb) continue Continuing. Program terminated with signal SIGILL, Illegal instruction. The program no longer exists. (gdb) The same problem! (gdb) run Starting program: /net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) set foop = foo32 (gdb) advance foo32 foo32 () at foobar.c:14 14 } (gdb) disassemble Dump of assembler code for function foo32: => 0x00400684 <+0>: jr ra 0x00400688 <+4>: li v0,3 End of assembler dump. (gdb) finish Run till exit from #0 foo32 () at foobar.c:14 main () at foobar.c:24 24 } Value returned is $14 = 3 (gdb) continue Continuing. [Inferior 1 (process 14113) exited with code 03] (gdb) That did work though, so it's the ISA bit only! (gdb) quit Enough! That's the tip of the iceberg only though. So let's rebuild the executable with some dynamic symbols: $ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c $ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar' Symbol table '.dynsym' contains 32 entries: 6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi Symbol table '.symtab' contains 95 entries: 55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c 69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar 71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p 72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop 79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32 81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo 89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi $ OK, now the ISA bit is there for a change, but the MIPS16 `st_other' attribute gone, hmm... What does `objdump' do then: $ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar' foobar-dyn: file format elf32-tradbigmips SYMBOL TABLE: 00000000 l df *ABS* 00000000 foobar.c 004009cc g F .text 00000004 0xf0 bar 00410b88 g O .data 00000004 foo32p 00410b84 g O .data 00000004 foop 004009c4 g F .text 00000008 foo32 004009c0 g F .text 00000004 0xf0 foo 00410b80 g O .data 00000004 fooi DYNAMIC SYMBOL TABLE: 004009cc g DF .text 00000004 Base 0xf0 bar 00410b88 g DO .data 00000004 Base foo32p 00410b84 g DO .data 00000004 Base foop 004009c4 g DF .text 00000008 Base foo32 004009c0 g DF .text 00000004 Base 0xf0 foo 00410b80 g DO .data 00000004 Base fooi $ Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone again. Let's have a look at some DWARF-2 records GDB uses (I'll be stripping off a lot here for brevity) -- debug info: $ mips-linux-gnu-readelf -wi foobar Contents of the .debug_info section: [...] Compilation Unit @ offset 0x88: Length: 0xbb (32-bit) Version: 4 Abbrev Offset: 62 Pointer Size: 4 <0><93>: Abbrev Number: 1 (DW_TAG_compile_unit) <94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2 <98> DW_AT_language : 1 (ANSI C) <99> DW_AT_name : (indirect string, offset: 0x190): foobar.c <9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...] <a1> DW_AT_ranges : 0x0 <a5> DW_AT_low_pc : 0x0 <a9> DW_AT_stmt_list : 0x27 <1><ad>: Abbrev Number: 2 (DW_TAG_subprogram) <ae> DW_AT_external : 1 <ae> DW_AT_name : foo <b2> DW_AT_decl_file : 1 <b3> DW_AT_decl_line : 1 <b4> DW_AT_prototyped : 1 <b4> DW_AT_type : <0xc2> <b8> DW_AT_low_pc : 0x400680 <bc> DW_AT_high_pc : 0x400684 <c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <c2> DW_AT_GNU_all_call_sites: 1 <1><c2>: Abbrev Number: 3 (DW_TAG_base_type) <c3> DW_AT_byte_size : 4 <c4> DW_AT_encoding : 5 (signed) <c5> DW_AT_name : int <1><c9>: Abbrev Number: 4 (DW_TAG_subprogram) <ca> DW_AT_external : 1 <ca> DW_AT_name : (indirect string, offset: 0x18a): foo32 <ce> DW_AT_decl_file : 1 <cf> DW_AT_decl_line : 11 <d0> DW_AT_prototyped : 1 <d0> DW_AT_type : <0xc2> <d4> DW_AT_low_pc : 0x400684 <d8> DW_AT_high_pc : 0x40068c <dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <de> DW_AT_GNU_all_call_sites: 1 <1><de>: Abbrev Number: 2 (DW_TAG_subprogram) <df> DW_AT_external : 1 <df> DW_AT_name : bar <e3> DW_AT_decl_file : 1 <e4> DW_AT_decl_line : 6 <e5> DW_AT_prototyped : 1 <e5> DW_AT_type : <0xc2> <e9> DW_AT_low_pc : 0x40068c <ed> DW_AT_high_pc : 0x400690 <f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <f3> DW_AT_GNU_all_call_sites: 1 <1><f3>: Abbrev Number: 5 (DW_TAG_subprogram) <f4> DW_AT_external : 1 <f4> DW_AT_name : (indirect string, offset: 0x199): main <f8> DW_AT_decl_file : 1 <f9> DW_AT_decl_line : 21 <fa> DW_AT_prototyped : 1 <fa> DW_AT_type : <0xc2> <fe> DW_AT_low_pc : 0x400490 <102> DW_AT_high_pc : 0x4004a4 <106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa) <108> DW_AT_GNU_all_tail_call_sites: 1 [...] $ -- no sign of the ISA bit anywhere -- frame info: $ mips-linux-gnu-readelf -wf foobar [...] Contents of the .debug_frame section: 00000000 0000000c ffffffff CIE Version: 1 Augmentation: "" Code alignment factor: 1 Data alignment factor: -4 Return address column: 31 DW_CFA_def_cfa_register: r29 DW_CFA_nop 00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684 00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c 00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690 00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4 DW_CFA_advance_loc: 6 to 00400496 DW_CFA_def_cfa_offset: 32 DW_CFA_offset: r31 at cfa-4 DW_CFA_advance_loc: 6 to 0040049c DW_CFA_restore: r31 DW_CFA_def_cfa_offset: 0 DW_CFA_nop DW_CFA_nop DW_CFA_nop [...] $ -- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange): $ mips-linux-gnu-readelf -wR foobar Contents of the .debug_ranges section: Offset Begin End 00000000 00400680 00400690 00000000 00400490 004004a4 00000000 <End of list> $ -- no sign of the ISA bit anywhere -- line info: $ mips-linux-gnu-readelf -wl foobar Raw dump of debug contents of section .debug_line: [...] Offset: 0x27 Length: 78 DWARF Version: 2 Prologue Length: 31 Minimum Instruction Length: 1 Initial value of 'is_stmt': 1 Line Base: -5 Line Range: 14 Opcode Base: 13 Opcodes: Opcode 1 has 0 args Opcode 2 has 1 args Opcode 3 has 1 args Opcode 4 has 1 args Opcode 5 has 1 args Opcode 6 has 0 args Opcode 7 has 0 args Opcode 8 has 0 args Opcode 9 has 1 args Opcode 10 has 0 args Opcode 11 has 0 args Opcode 12 has 1 args The Directory Table is empty. The File Name Table: Entry Dir Time Size Name 1 0 0 0 foobar.c Line Number Statements: Extended opcode 2: set Address to 0x400681 Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2 Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4 Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12 Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14 Advance Line by -7 to 7 Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7 Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9 Advance PC by 3 to 0x400690 Extended opcode 1: End of Sequence Extended opcode 2: set Address to 0x400491 Advance Line by 21 to 22 Copy Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23 Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22 Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23 Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24 Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23 Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24 Advance PC by 7 to 0x4004a4 Extended opcode 1: End of Sequence [...] -- a-ha, the ISA bit is there! However it's not always right for some reason, I don't have a small test case to show it, but here's an excerpt from MIPS16 libc, a prologue of a function: 00019630 <__libc_init_first>: 19630: e8a0 jrc ra 19632: 6500 nop 00019634 <_init>: 19634: f000 6a11 li v0,17 19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54> 1963c: f400 3240 sll v0,16 19640: e269 addu v0,v1 19642: 659a move gp,v0 19644: 64f6 save 48,ra,s0-s1 19646: 671c move s0,gp 19648: d204 sw v0,16(sp) 1964a: f352 984c lw v0,-27828(s0) 1964e: 6724 move s1,a0 and the corresponding DWARF-2 line info: Line Number Statements: Extended opcode 2: set Address to 0x19631 Advance Line by 44 to 45 Copy Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48 Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53 Advance PC by constant 17 to 0x19646 Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53 Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59 Advance Line by -6 to 53 Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53 -- see that "Advance PC by constant 17" there? It clears the ISA bit, however code at 0x19646 is not standard MIPS code at all. For some reason the constant is always 17, I've never seen DW_LNS_const_add_pc used with any other value -- is that a binutils bug or what? 3. Solution: I think we should retain the value of the ISA bit in code references, that is effectively treat them as cookies as they indeed are (although trivially calculated) rather than raw memory byte addresses. In a perfect world both the static symbol table and the respective DWARF-2 records should be fixed to include the ISA bit in all the cases. I think however that this is infeasible. All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be tracked down. This function is used by `elf_slurp_symbol_table' that in turn is used by `bfd_canonicalize_symtab' and `bfd_canonicalize_dynamic_symtab', which are public interfaces. Similarly DWARF-2 records are used outside GDB, one notable if a bit questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have identified at least bits in `execute_cfa_program' and `uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame', that would need an update as they effectively flip the ISA bit freely; see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h. But there may be more places. Any change in how DWARF-2 records are produced would require an update there and would cause compatibility problems with libgcc.a binaries already distributed; given that this is a static library a complex change involving function renames would likely be required. I propose therefore to accept the existing inconsistencies and deal with them entirely within GDB. I have figured out that the ISA bit lost in various places can still be recovered as long as we have symbol information -- that'll have the `st_other' attribute correctly set to one of standard MIPS/MIPS16/microMIPS encoding. Here's the resulting change. It adds a couple of new `gdbarch' hooks, one to update symbol information with the ISA bit lost in `_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2 records as they're processed. The ISA bit is set in each address handled according to information retrieved from the symbol table for the symbol spanning the address if any; limits are adjusted based on the address they point to related to the respective base address. Additionally minimal symbol information has to be adjusted accordingly in its gdbarch hook. With these changes in place some complications with ISA bit juggling in the PC that never fully worked can be removed from the MIPS backend. Conversely, the generic dynamic linker event special breakpoint symbol handler has to be updated to call the minimal symbol gdbarch hook to record that the symbol is a MIPS16 or microMIPS address if applicable or the breakpoint will be set at the wrong address and either fail to work or cause SIGTRAPs (this is because the symbol is handled early on and bypasses regular symbol processing). 4. Results obtained The change fixes the example above -- to repeat only the crucial steps: (gdb) break main Breakpoint 1 at 0x400491: file foobar.c, line 23. (gdb) run Starting program: .../foobar Breakpoint 1, main () at foobar.c:23 23 return foop (); (gdb) print foo $1 = {int (void)} 0x400681 <foo> (gdb) set foop = bar (gdb) advance bar bar () at foobar.c:9 9 } (gdb) disassemble Dump of assembler code for function bar: => 0x0040068d <+0>: jr ra 0x0040068f <+2>: li v0,2 End of assembler dump. (gdb) finish Run till exit from #0 bar () at foobar.c:9 main () at foobar.c:24 24 } Value returned is $2 = 2 (gdb) continue Continuing. [Inferior 1 (process 14128) exited with code 02] (gdb) -- excellent! The change removes about 90 failures per MIPS16 multilib in mips-sde-elf testing too, results for MIPS16 are now similar to that for standard MIPS; microMIPS results are a bit worse because of host-I/O problems in QEMU used instead of MIPSsim for microMIPS testing only: === gdb Summary === # of expected passes 14299 # of unexpected failures 187 # of expected failures 56 # of known failures 58 # of unresolved testcases 11 # of untested testcases 52 # of unsupported tests 174 MIPS16: === gdb Summary === # of expected passes 14298 # of unexpected failures 187 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 12 # of untested testcases 52 # of unsupported tests 174 microMIPS: === gdb Summary === # of expected passes 14149 # of unexpected failures 201 # of unexpected successes 2 # of expected failures 54 # of known failures 58 # of unresolved testcases 7 # of untested testcases 53 # of unsupported tests 175 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> Maciej W. Rozycki <macro@mips.com> Pedro Alves <pedro@codesourcery.com> gdb/ * gdbarch.sh (elf_make_msymbol_special): Change type to `F', remove `predefault' and `invalid_p' initializers. (make_symbol_special): New architecture method. (adjust_dwarf2_addr, adjust_dwarf2_line): Likewise. (objfile, symbol): New declarations. * arch-utils.h (default_elf_make_msymbol_special): Remove prototype. (default_make_symbol_special): New prototype. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * mips-tdep.h (mips_unmake_compact_addr): New prototype. * arch-utils.c (default_elf_make_msymbol_special): Remove function. (default_make_symbol_special): New function. (default_adjust_dwarf2_addr): Likewise. (default_adjust_dwarf2_line): Likewise. * dwarf2-frame.c (decode_frame_entry_1): Call `gdbarch_adjust_dwarf2_addr'. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. * dwarf2read.c (create_addrmap_from_index): Likewise. (process_psymtab_comp_unit_reader): Likewise. (add_partial_symbol): Likewise. (add_partial_subprogram): Likewise. (process_full_comp_unit): Likewise. (read_file_scope): Likewise. (read_func_scope): Likewise. Call `gdbarch_make_symbol_special'. (read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'. (read_call_site_scope): Likewise. (dwarf2_ranges_read): Likewise. (dwarf2_record_block_ranges): Likewise. (read_attribute_value): Likewise. (dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'. (new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'. * elfread.c (elf_symtab_read): Don't call `gdbarch_elf_make_msymbol_special' if unset. * mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip the ISA bit from the PC. * mips-tdep.c (mips_unmake_compact_addr): New function. (mips_elf_make_msymbol_special): Set the ISA bit in the symbol's address appropriately. (mips_make_symbol_special): New function. (mips_pc_is_mips): Set the ISA bit before symbol lookup. (mips_pc_is_mips16): Likewise. (mips_pc_is_micromips): Likewise. (mips_pc_isa): Likewise. (mips_adjust_dwarf2_addr): New function. (mips_adjust_dwarf2_line): Likewise. (mips_read_pc, mips_unwind_pc): Keep the ISA bit. (mips_addr_bits_remove): Likewise. (mips_skip_trampoline_code): Likewise. (mips_write_pc): Don't set the ISA bit. (mips_eabi_push_dummy_call): Likewise. (mips_o64_push_dummy_call): Likewise. (mips_gdbarch_init): Install `mips_make_symbol_special', `mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch handlers. * solib.c (gdb_bfd_lookup_symbol_from_symtab): Get target-specific symbol address adjustments. * gdbarch.h: Regenerate. * gdbarch.c: Regenerate. 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com> gdb/testsuite/ * gdb.base/func-ptrs.c: New file. * gdb.base/func-ptrs.exp: New file.
2014-12-12 14:31:53 +01:00
/* See arch-utils.h. */
CORE_ADDR
default_adjust_dwarf2_addr (CORE_ADDR pc)
{
return pc;
}
/* See arch-utils.h. */
CORE_ADDR
default_adjust_dwarf2_line (CORE_ADDR addr, int rel)
{
return addr;
}
int
cannot_register_not (struct gdbarch *gdbarch, int regnum)
{
return 0;
}
/* Legacy version of target_virtual_frame_pointer(). Assumes that
there is an gdbarch_deprecated_fp_regnum and that it is the same,
cooked or raw. */
void
legacy_virtual_frame_pointer (struct gdbarch *gdbarch,
CORE_ADDR pc,
int *frame_regnum,
LONGEST *frame_offset)
{
/* FIXME: cagney/2002-09-13: This code is used when identifying the
frame pointer of the current PC. It is assuming that a single
register and an offset can determine this. I think it should
instead generate a byte code expression as that would work better
with things like Dwarf2's CFI. */
if (gdbarch_deprecated_fp_regnum (gdbarch) >= 0
&& gdbarch_deprecated_fp_regnum (gdbarch)
< gdbarch_num_regs (gdbarch))
*frame_regnum = gdbarch_deprecated_fp_regnum (gdbarch);
else if (gdbarch_sp_regnum (gdbarch) >= 0
&& gdbarch_sp_regnum (gdbarch)
< gdbarch_num_regs (gdbarch))
*frame_regnum = gdbarch_sp_regnum (gdbarch);
else
/* Should this be an internal error? I guess so, it is reflecting
an architectural limitation in the current design. */
internal_error (__FILE__, __LINE__,
_("No virtual frame pointer available"));
*frame_offset = 0;
}
int
generic_convert_register_p (struct gdbarch *gdbarch, int regnum,
struct type *type)
{
return 0;
}
int
default_stabs_argument_has_addr (struct gdbarch *gdbarch, struct type *type)
{
return 0;
}
int
generic_instruction_nullified (struct gdbarch *gdbarch,
struct regcache *regcache)
{
return 0;
}
* Makefile.in (arm-tdep.o, eval.o, target-descriptions.o) (xml-tdesc.o): Update. * xml-support.c: Add a comment. (gdb_xml_enums_boolean): New variable. (gdb_xml_parse_attr_enum): Use strcasecmp. * xml-support.h (gdb_xml_enums_boolean): Declare. * xml-tdesc.c (struct tdesc_parsing_data): Record current_feature, next_regnum, and current_union. (tdesc_start_feature, tdesc_start_reg, tdesc_start_union) (tdesc_end_union, tdesc_start_field, tdesc_start_vector) (field_attributes, union_children, reg_attributes, union_attributes) (vector_attributes, feature_attributes, feature_children): New. (target_children): Make static. Add <feature>. (tdesc_elements): Make static. * target-descriptions.c (struct tdesc_reg, tdesc_reg_p, type_p) (struct tdesc_feature, tdesc_feature_p): New types. (struct target_desc): Add features member. (struct tdesc_arch_data, tdesc_data): New. (target_find_description): Clarify error message. Warn about ignored register descriptions. (tdesc_has_registers, tdesc_find_feature, tdesc_feature_name) (tdesc_named_type, tdesc_data_init, tdesc_data_alloc) (tdesc_data_cleanup, tdesc_numbered_register) (tdesc_numbered_register_choices, tdesc_find_register) (tdesc_register_name, tdesc_register_type) (tdesc_remote_register_number, tdesc_register_reggroup_p) (set_tdesc_pseudo_register_name, set_tdesc_pseudo_register_type) (set_tdesc_pseudo_register_reggroup_p, tdesc_use_registers) (tdesc_free_reg, tdesc_create_reg, tdesc_free_feature) (tdesc_create_feature, tdesc_record_type): New. (free_target_description): Free features. (_initialize_target_descriptions): Initialize tdesc_data. * arch-utils.c (default_remote_register_number): New. * arch-utils.h (default_remote_register_number): New prototype. * target-descriptions.h (set_tdesc_pseudo_register_name) (set_tdesc_pseudo_register_type, set_tdesc_pseudo_register_reggroup_p) (tdesc_use_registers, tdesc_data_alloc, tdesc_data_cleanup) (tdesc_numbered_register, tdesc_numbered_register_choices) (tdesc_has_registers, tdesc_find_feature, tdesc_feature_name) (tdesc_named_type, tdesc_create_feature, tdesc_record_type) (tdesc_create_reg): Declare. * gdbarch.sh (remote_register_number): New entry. * gdbarch.c, gdbarch.h: Regenerate. * remote.c (init_remote_state): Use gdbarch_remote_register_number. * features/gdb-target.dtd: Add feature, reg, vector, union, and field. * arm-tdep.c (arm_register_aliases): New. (arm_register_name_strings): Rename to... (arm_register_names): ...this. Make const. Delete the old version. (current_option, arm_register_byte): Delete. (set_disassembly_style): Simplify. Do not adjust arm_register_names. (value_of_arm_user_reg): New. (arm_gdbarch_init): Verify any described registers. Call tdesc_use_registers. Don't use arm_register_byte. Create aliases for standard register names. (_initialize_arm_tdep): Do not adjust arm_register_names. * user-regs.c (struct user_reg): Add baton member. (append_user_reg, user_reg_add_builtin, user_regs_init) (user_reg_add, value_of_user_reg): Use a baton for user register functions. * std-regs.c: Update. * user-regs.h (user_reg_read_ftype, user_reg_add_builtin) (user_reg_add): Add baton argument. * NEWS: Mention target description register support. * features/arm-core.xml, features/arm-fpa.xml: New. * eval.c (evaluate_subexp_standard): Allow ptype $register when the program is not running. * gdb.texinfo (-target-disconnect): Use @smallexample. (Requirements): Add anchor for Expat. Update description. (Target Descriptions): Mention Expat. (Target Description Format): Document new elements. Use @smallexample. (Predefined Target Types, Standard Target Features): New sections. * doc/gdbint.texinfo (Target Descriptions): New section. * gdb.xml/single-reg.xml, gdb.xml/tdesc-regs.exp, gdb.xml/core-only.xml, gdb.xml/extra-regs.xml: New files.
2007-02-08 22:00:36 +01:00
int
default_remote_register_number (struct gdbarch *gdbarch,
int regno)
{
return regno;
}
/* See arch-utils.h. */
int
default_vsyscall_range (struct gdbarch *gdbarch, struct mem_range *range)
{
return 0;
}
/* Functions to manipulate the endianness of the target. */
static int target_byte_order_user = BFD_ENDIAN_UNKNOWN;
static const char endian_big[] = "big";
static const char endian_little[] = "little";
static const char endian_auto[] = "auto";
gdb/ Code cleanup: Make 1440 bytes of data segment read-only. * arch-utils.c (endian_enum): Make it const char *const []. * arm-tdep.c (fp_model_strings, arm_abi_strings, arm_mode_strings): Likewise. * breakpoint.c (always_inserted_enums): Likewise. * cli/cli-cmds.c (script_ext_enums): Likewise. * cli/cli-decode.c (add_setshow_enum_cmd, complete_on_enum): Make the enumlist parameter const char *const *. * cli/cli-decode.h (struct cmd_list_element): Make the enums field const char *const *. * command.h (complete_on_enum, add_setshow_enum_cmd): Make the enumlist parameter const char *const *. * cris-tdep.c (cris_modes): Make it const char *const []. * filesystem.c (target_file_system_kinds): Likewise. * i386-tdep.c (valid_flavors, valid_conventions): Likewise. * infrun.c (follow_fork_mode_kind_names, follow_exec_mode_names) (can_use_displaced_stepping_enum, scheduler_enums) (exec_direction_names): Likewise. * language.c (_initialize_language): Make the type_or_range_names and case_sensitive_names variables const char *const []. * mips-tdep.c (mips_abi_strings): Make it const char *const []. * python/python.c (python_excp_enums): Likewise. * remote.c (interrupt_sequence_modes): Likewise. * rs6000-tdep.c (powerpc_vector_strings): Likewise. * serial.c (logbase_enums): Likewise. * sh-tdep.c (sh_cc_enum): Likewise. * stack.c (print_frame_arguments_choices, print_entry_values_choices): Likewise. * symtab.c (multiple_symbols_modes): Likewise. * tui/tui-win.c (tui_border_kind_enums, tui_border_mode_enums): Likewise. * utils.c (internal_problem_modes): Likewise.
2012-01-28 19:08:22 +01:00
static const char *const endian_enum[] =
{
endian_big,
endian_little,
endian_auto,
NULL,
};
static const char *set_endian_string;
enum bfd_endian
selected_byte_order (void)
{
* arch-utils.c (selected_byte_order): Return target_byte_order_user. (show_endian): Use target_byte_order_user if specified; otherwise use get_current_arch () instead of current_gdbarch. (show_architecture): Use set_architecture_string if specified; otherwise use get_current_arch () instead of current_gdbarch. (get_current_arch): New function. * arch-utils.h (get_current_arch): Add prototype. * osabi.c (show_osabi): Use get_current_arch () instead of current_gdbarch. * findcmd.c: Include "arch-utils.h". (parse_find_args): Add BIG_P argument. Use it instead of byte order of current_gdbarch. (find_command): Use get_current_arch () instead of current_gdbarch. Pass byte order to parse_find_args. * maint.c: Include "arch-utils.h". (maintenance_print_architecture): Use get_current_arch () instead of current_gdbarch. * reggroups.c: Include "arch-utils.h". (maintenance_print_reggroups): Use get_current_arch () instead of current_gdbarch. * symfile.c: Include "arch-utils.h". (overlay_load_command): Use get_current_arch () instead of current_gdbarch. * value.c: Include "arch-utils.h". (show_convenience): Use get_current_arch () instead of current_gdbarch. * tui/tui-regs.c: Include "arch-utils.h". (tui_reg_next_command): Use get_current_arch () instead of current_gdbarch. * mi/mi-main.c: Include "arch-utils.h". (mi_cmd_data_read_memory): Use get_current_arch () instead of current_gdbarch. * parse.c: Include "arch-utils.h". (parse_exp_in_context): Use get_current_arch () instead of current_gdbarch.
2009-07-02 19:02:35 +02:00
return target_byte_order_user;
}
/* Called by ``show endian''. */
static void
show_endian (struct ui_file *file, int from_tty, struct cmd_list_element *c,
const char *value)
{
if (target_byte_order_user == BFD_ENDIAN_UNKNOWN)
* arch-utils.c (selected_byte_order): Return target_byte_order_user. (show_endian): Use target_byte_order_user if specified; otherwise use get_current_arch () instead of current_gdbarch. (show_architecture): Use set_architecture_string if specified; otherwise use get_current_arch () instead of current_gdbarch. (get_current_arch): New function. * arch-utils.h (get_current_arch): Add prototype. * osabi.c (show_osabi): Use get_current_arch () instead of current_gdbarch. * findcmd.c: Include "arch-utils.h". (parse_find_args): Add BIG_P argument. Use it instead of byte order of current_gdbarch. (find_command): Use get_current_arch () instead of current_gdbarch. Pass byte order to parse_find_args. * maint.c: Include "arch-utils.h". (maintenance_print_architecture): Use get_current_arch () instead of current_gdbarch. * reggroups.c: Include "arch-utils.h". (maintenance_print_reggroups): Use get_current_arch () instead of current_gdbarch. * symfile.c: Include "arch-utils.h". (overlay_load_command): Use get_current_arch () instead of current_gdbarch. * value.c: Include "arch-utils.h". (show_convenience): Use get_current_arch () instead of current_gdbarch. * tui/tui-regs.c: Include "arch-utils.h". (tui_reg_next_command): Use get_current_arch () instead of current_gdbarch. * mi/mi-main.c: Include "arch-utils.h". (mi_cmd_data_read_memory): Use get_current_arch () instead of current_gdbarch. * parse.c: Include "arch-utils.h". (parse_exp_in_context): Use get_current_arch () instead of current_gdbarch.
2009-07-02 19:02:35 +02:00
if (gdbarch_byte_order (get_current_arch ()) == BFD_ENDIAN_BIG)
fprintf_unfiltered (file, _("The target endianness is set automatically "
"(currently big endian)\n"));
else
fprintf_unfiltered (file, _("The target endianness is set automatically "
2011-01-05 Michael Snyder <msnyder@vmware.com> * addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-05 23:22:53 +01:00
"(currently little endian)\n"));
else
* arch-utils.c (selected_byte_order): Return target_byte_order_user. (show_endian): Use target_byte_order_user if specified; otherwise use get_current_arch () instead of current_gdbarch. (show_architecture): Use set_architecture_string if specified; otherwise use get_current_arch () instead of current_gdbarch. (get_current_arch): New function. * arch-utils.h (get_current_arch): Add prototype. * osabi.c (show_osabi): Use get_current_arch () instead of current_gdbarch. * findcmd.c: Include "arch-utils.h". (parse_find_args): Add BIG_P argument. Use it instead of byte order of current_gdbarch. (find_command): Use get_current_arch () instead of current_gdbarch. Pass byte order to parse_find_args. * maint.c: Include "arch-utils.h". (maintenance_print_architecture): Use get_current_arch () instead of current_gdbarch. * reggroups.c: Include "arch-utils.h". (maintenance_print_reggroups): Use get_current_arch () instead of current_gdbarch. * symfile.c: Include "arch-utils.h". (overlay_load_command): Use get_current_arch () instead of current_gdbarch. * value.c: Include "arch-utils.h". (show_convenience): Use get_current_arch () instead of current_gdbarch. * tui/tui-regs.c: Include "arch-utils.h". (tui_reg_next_command): Use get_current_arch () instead of current_gdbarch. * mi/mi-main.c: Include "arch-utils.h". (mi_cmd_data_read_memory): Use get_current_arch () instead of current_gdbarch. * parse.c: Include "arch-utils.h". (parse_exp_in_context): Use get_current_arch () instead of current_gdbarch.
2009-07-02 19:02:35 +02:00
if (target_byte_order_user == BFD_ENDIAN_BIG)
fprintf_unfiltered (file,
_("The target is assumed to be big endian\n"));
else
fprintf_unfiltered (file,
_("The target is assumed to be little endian\n"));
}
static void
set_endian (char *ignore_args, int from_tty, struct cmd_list_element *c)
{
struct gdbarch_info info;
gdbarch_info_init (&info);
if (set_endian_string == endian_auto)
{
target_byte_order_user = BFD_ENDIAN_UNKNOWN;
if (! gdbarch_update_p (info))
internal_error (__FILE__, __LINE__,
_("set_endian: architecture update failed"));
}
else if (set_endian_string == endian_little)
{
info.byte_order = BFD_ENDIAN_LITTLE;
if (! gdbarch_update_p (info))
printf_unfiltered (_("Little endian target not supported by GDB\n"));
else
target_byte_order_user = BFD_ENDIAN_LITTLE;
}
else if (set_endian_string == endian_big)
{
info.byte_order = BFD_ENDIAN_BIG;
if (! gdbarch_update_p (info))
printf_unfiltered (_("Big endian target not supported by GDB\n"));
else
target_byte_order_user = BFD_ENDIAN_BIG;
}
else
internal_error (__FILE__, __LINE__,
_("set_endian: bad value"));
show_endian (gdb_stdout, from_tty, NULL, NULL);
}
XML feature description support. * NEWS: Mention target descriptions, "set tdesc filename", "unset tdesc filename", "show tdesc filename", and qXfer:features:read. * arch-utils.c (choose_architecture_for_target): New function. (gdbarch_info_fill): Call it. * target-descriptions.c (struct property): Make members non-const. (struct target_desc): Add arch member. (target_description_filename): New variable. (target_find_description): Try via XML first. (tdesc_architecture): New. (free_target_description, make_cleanup_free_target_description): New. (set_tdesc_property): Call xstrdup. (set_tdesc_architecture, tdesc_set_cmdlist, tdesc_show_cmdlist) (tdesc_unset_cmdlist, unset_tdesc_cmd, unset_tdesc_filename_cmd) (set_tdesc_cmd, show_tdesc_cmd, set_tdesc_filename_cmd) (show_tdesc_filename_cmd, _initialize_target_descriptions): New. * target-descriptions.h (tdesc_architecture) (make_cleanup_free_target_description, set_tdesc_architecture): New prototypes. * Makefile.in (SFILES): Add xml-tdesc.c. (COMMON_OBS): Add xml-tdesc.o. (target-descriptions.o): Update. (xml-tdesc.o): New rule. * xml-tdesc.c, xml-tdesc.h: New files. * remote.c (PACKET_qXfer_features): New enum. (remote_protocol_features): Add qXfer:features:read. (remote_xfer_partial): Handle TARGET_OBJECT_AVAILABLE_FEATURES. (_initialize_remote): Register qXfer:features:read. * target.h (enum target_object): Add TARGET_OBJECT_AVAILABLE_FEATURES. * features/gdb-target.dtd: New file. * linux-i386-low.c (the_low_target): Set arch_string. * linux-x86-64-low.c (the_low_target): Likewise. * linux-low.c (linux_arch_string): New. (linux_target_ops): Add it. * linux-low.h (struct linux_target_ops): Add arch_string. * server.c (write_qxfer_response): Use const void * for DATA. (get_features_xml): New. (handle_query): Handle qXfer:features:read. Report it for qSupported. * target.h (struct target_ops): Add arch_string method. * gdb.texinfo (Target Descriptions): New section. (General Query Packets): Add QPassSignals anchor. Mention qXfer:features:read under qSupported. Expand mentions of qXfer:memory-map:read and QPassSignals. Document qXfer:features:read.
2007-01-09 23:55:10 +01:00
/* Given SELECTED, a currently selected BFD architecture, and
TARGET_DESC, the current target description, return what
architecture to use.
SELECTED may be NULL, in which case we return the architecture
associated with TARGET_DESC. If SELECTED specifies a variant
of the architecture associtated with TARGET_DESC, return the
more specific of the two.
If SELECTED is a different architecture, but it is accepted as
compatible by the target, we can use the target architecture.
If SELECTED is obviously incompatible, warn the user. */
XML feature description support. * NEWS: Mention target descriptions, "set tdesc filename", "unset tdesc filename", "show tdesc filename", and qXfer:features:read. * arch-utils.c (choose_architecture_for_target): New function. (gdbarch_info_fill): Call it. * target-descriptions.c (struct property): Make members non-const. (struct target_desc): Add arch member. (target_description_filename): New variable. (target_find_description): Try via XML first. (tdesc_architecture): New. (free_target_description, make_cleanup_free_target_description): New. (set_tdesc_property): Call xstrdup. (set_tdesc_architecture, tdesc_set_cmdlist, tdesc_show_cmdlist) (tdesc_unset_cmdlist, unset_tdesc_cmd, unset_tdesc_filename_cmd) (set_tdesc_cmd, show_tdesc_cmd, set_tdesc_filename_cmd) (show_tdesc_filename_cmd, _initialize_target_descriptions): New. * target-descriptions.h (tdesc_architecture) (make_cleanup_free_target_description, set_tdesc_architecture): New prototypes. * Makefile.in (SFILES): Add xml-tdesc.c. (COMMON_OBS): Add xml-tdesc.o. (target-descriptions.o): Update. (xml-tdesc.o): New rule. * xml-tdesc.c, xml-tdesc.h: New files. * remote.c (PACKET_qXfer_features): New enum. (remote_protocol_features): Add qXfer:features:read. (remote_xfer_partial): Handle TARGET_OBJECT_AVAILABLE_FEATURES. (_initialize_remote): Register qXfer:features:read. * target.h (enum target_object): Add TARGET_OBJECT_AVAILABLE_FEATURES. * features/gdb-target.dtd: New file. * linux-i386-low.c (the_low_target): Set arch_string. * linux-x86-64-low.c (the_low_target): Likewise. * linux-low.c (linux_arch_string): New. (linux_target_ops): Add it. * linux-low.h (struct linux_target_ops): Add arch_string. * server.c (write_qxfer_response): Use const void * for DATA. (get_features_xml): New. (handle_query): Handle qXfer:features:read. Report it for qSupported. * target.h (struct target_ops): Add arch_string method. * gdb.texinfo (Target Descriptions): New section. (General Query Packets): Add QPassSignals anchor. Mention qXfer:features:read under qSupported. Expand mentions of qXfer:memory-map:read and QPassSignals. Document qXfer:features:read.
2007-01-09 23:55:10 +01:00
static const struct bfd_arch_info *
choose_architecture_for_target (const struct target_desc *target_desc,
const struct bfd_arch_info *selected)
XML feature description support. * NEWS: Mention target descriptions, "set tdesc filename", "unset tdesc filename", "show tdesc filename", and qXfer:features:read. * arch-utils.c (choose_architecture_for_target): New function. (gdbarch_info_fill): Call it. * target-descriptions.c (struct property): Make members non-const. (struct target_desc): Add arch member. (target_description_filename): New variable. (target_find_description): Try via XML first. (tdesc_architecture): New. (free_target_description, make_cleanup_free_target_description): New. (set_tdesc_property): Call xstrdup. (set_tdesc_architecture, tdesc_set_cmdlist, tdesc_show_cmdlist) (tdesc_unset_cmdlist, unset_tdesc_cmd, unset_tdesc_filename_cmd) (set_tdesc_cmd, show_tdesc_cmd, set_tdesc_filename_cmd) (show_tdesc_filename_cmd, _initialize_target_descriptions): New. * target-descriptions.h (tdesc_architecture) (make_cleanup_free_target_description, set_tdesc_architecture): New prototypes. * Makefile.in (SFILES): Add xml-tdesc.c. (COMMON_OBS): Add xml-tdesc.o. (target-descriptions.o): Update. (xml-tdesc.o): New rule. * xml-tdesc.c, xml-tdesc.h: New files. * remote.c (PACKET_qXfer_features): New enum. (remote_protocol_features): Add qXfer:features:read. (remote_xfer_partial): Handle TARGET_OBJECT_AVAILABLE_FEATURES. (_initialize_remote): Register qXfer:features:read. * target.h (enum target_object): Add TARGET_OBJECT_AVAILABLE_FEATURES. * features/gdb-target.dtd: New file. * linux-i386-low.c (the_low_target): Set arch_string. * linux-x86-64-low.c (the_low_target): Likewise. * linux-low.c (linux_arch_string): New. (linux_target_ops): Add it. * linux-low.h (struct linux_target_ops): Add arch_string. * server.c (write_qxfer_response): Use const void * for DATA. (get_features_xml): New. (handle_query): Handle qXfer:features:read. Report it for qSupported. * target.h (struct target_ops): Add arch_string method. * gdb.texinfo (Target Descriptions): New section. (General Query Packets): Add QPassSignals anchor. Mention qXfer:features:read under qSupported. Expand mentions of qXfer:memory-map:read and QPassSignals. Document qXfer:features:read.
2007-01-09 23:55:10 +01:00
{
const struct bfd_arch_info *from_target = tdesc_architecture (target_desc);
XML feature description support. * NEWS: Mention target descriptions, "set tdesc filename", "unset tdesc filename", "show tdesc filename", and qXfer:features:read. * arch-utils.c (choose_architecture_for_target): New function. (gdbarch_info_fill): Call it. * target-descriptions.c (struct property): Make members non-const. (struct target_desc): Add arch member. (target_description_filename): New variable. (target_find_description): Try via XML first. (tdesc_architecture): New. (free_target_description, make_cleanup_free_target_description): New. (set_tdesc_property): Call xstrdup. (set_tdesc_architecture, tdesc_set_cmdlist, tdesc_show_cmdlist) (tdesc_unset_cmdlist, unset_tdesc_cmd, unset_tdesc_filename_cmd) (set_tdesc_cmd, show_tdesc_cmd, set_tdesc_filename_cmd) (show_tdesc_filename_cmd, _initialize_target_descriptions): New. * target-descriptions.h (tdesc_architecture) (make_cleanup_free_target_description, set_tdesc_architecture): New prototypes. * Makefile.in (SFILES): Add xml-tdesc.c. (COMMON_OBS): Add xml-tdesc.o. (target-descriptions.o): Update. (xml-tdesc.o): New rule. * xml-tdesc.c, xml-tdesc.h: New files. * remote.c (PACKET_qXfer_features): New enum. (remote_protocol_features): Add qXfer:features:read. (remote_xfer_partial): Handle TARGET_OBJECT_AVAILABLE_FEATURES. (_initialize_remote): Register qXfer:features:read. * target.h (enum target_object): Add TARGET_OBJECT_AVAILABLE_FEATURES. * features/gdb-target.dtd: New file. * linux-i386-low.c (the_low_target): Set arch_string. * linux-x86-64-low.c (the_low_target): Likewise. * linux-low.c (linux_arch_string): New. (linux_target_ops): Add it. * linux-low.h (struct linux_target_ops): Add arch_string. * server.c (write_qxfer_response): Use const void * for DATA. (get_features_xml): New. (handle_query): Handle qXfer:features:read. Report it for qSupported. * target.h (struct target_ops): Add arch_string method. * gdb.texinfo (Target Descriptions): New section. (General Query Packets): Add QPassSignals anchor. Mention qXfer:features:read under qSupported. Expand mentions of qXfer:memory-map:read and QPassSignals. Document qXfer:features:read.
2007-01-09 23:55:10 +01:00
const struct bfd_arch_info *compat1, *compat2;
if (selected == NULL)
return from_target;
if (from_target == NULL)
return selected;
/* struct bfd_arch_info objects are singletons: that is, there's
supposed to be exactly one instance for a given machine. So you
can tell whether two are equivalent by comparing pointers. */
if (from_target == selected)
return selected;
/* BFD's 'A->compatible (A, B)' functions return zero if A and B are
incompatible. But if they are compatible, it returns the 'more
featureful' of the two arches. That is, if A can run code
written for B, but B can't run code written for A, then it'll
return A.
Some targets (e.g. MIPS as of 2006-12-04) don't fully
implement this, instead always returning NULL or the first
argument. We detect that case by checking both directions. */
compat1 = selected->compatible (selected, from_target);
compat2 = from_target->compatible (from_target, selected);
if (compat1 == NULL && compat2 == NULL)
{
/* BFD considers the architectures incompatible. Check our
target description whether it accepts SELECTED as compatible
anyway. */
if (tdesc_compatible_p (target_desc, selected))
return from_target;
XML feature description support. * NEWS: Mention target descriptions, "set tdesc filename", "unset tdesc filename", "show tdesc filename", and qXfer:features:read. * arch-utils.c (choose_architecture_for_target): New function. (gdbarch_info_fill): Call it. * target-descriptions.c (struct property): Make members non-const. (struct target_desc): Add arch member. (target_description_filename): New variable. (target_find_description): Try via XML first. (tdesc_architecture): New. (free_target_description, make_cleanup_free_target_description): New. (set_tdesc_property): Call xstrdup. (set_tdesc_architecture, tdesc_set_cmdlist, tdesc_show_cmdlist) (tdesc_unset_cmdlist, unset_tdesc_cmd, unset_tdesc_filename_cmd) (set_tdesc_cmd, show_tdesc_cmd, set_tdesc_filename_cmd) (show_tdesc_filename_cmd, _initialize_target_descriptions): New. * target-descriptions.h (tdesc_architecture) (make_cleanup_free_target_description, set_tdesc_architecture): New prototypes. * Makefile.in (SFILES): Add xml-tdesc.c. (COMMON_OBS): Add xml-tdesc.o. (target-descriptions.o): Update. (xml-tdesc.o): New rule. * xml-tdesc.c, xml-tdesc.h: New files. * remote.c (PACKET_qXfer_features): New enum. (remote_protocol_features): Add qXfer:features:read. (remote_xfer_partial): Handle TARGET_OBJECT_AVAILABLE_FEATURES. (_initialize_remote): Register qXfer:features:read. * target.h (enum target_object): Add TARGET_OBJECT_AVAILABLE_FEATURES. * features/gdb-target.dtd: New file. * linux-i386-low.c (the_low_target): Set arch_string. * linux-x86-64-low.c (the_low_target): Likewise. * linux-low.c (linux_arch_string): New. (linux_target_ops): Add it. * linux-low.h (struct linux_target_ops): Add arch_string. * server.c (write_qxfer_response): Use const void * for DATA. (get_features_xml): New. (handle_query): Handle qXfer:features:read. Report it for qSupported. * target.h (struct target_ops): Add arch_string method. * gdb.texinfo (Target Descriptions): New section. (General Query Packets): Add QPassSignals anchor. Mention qXfer:features:read under qSupported. Expand mentions of qXfer:memory-map:read and QPassSignals. Document qXfer:features:read.
2007-01-09 23:55:10 +01:00
warning (_("Selected architecture %s is not compatible "
"with reported target architecture %s"),
selected->printable_name, from_target->printable_name);
return selected;
}
if (compat1 == NULL)
return compat2;
if (compat2 == NULL)
return compat1;
if (compat1 == compat2)
return compat1;
/* If the two didn't match, but one of them was a default
architecture, assume the more specific one is correct. This
handles the case where an executable or target description just
says "mips", but the other knows which MIPS variant. */
XML feature description support. * NEWS: Mention target descriptions, "set tdesc filename", "unset tdesc filename", "show tdesc filename", and qXfer:features:read. * arch-utils.c (choose_architecture_for_target): New function. (gdbarch_info_fill): Call it. * target-descriptions.c (struct property): Make members non-const. (struct target_desc): Add arch member. (target_description_filename): New variable. (target_find_description): Try via XML first. (tdesc_architecture): New. (free_target_description, make_cleanup_free_target_description): New. (set_tdesc_property): Call xstrdup. (set_tdesc_architecture, tdesc_set_cmdlist, tdesc_show_cmdlist) (tdesc_unset_cmdlist, unset_tdesc_cmd, unset_tdesc_filename_cmd) (set_tdesc_cmd, show_tdesc_cmd, set_tdesc_filename_cmd) (show_tdesc_filename_cmd, _initialize_target_descriptions): New. * target-descriptions.h (tdesc_architecture) (make_cleanup_free_target_description, set_tdesc_architecture): New prototypes. * Makefile.in (SFILES): Add xml-tdesc.c. (COMMON_OBS): Add xml-tdesc.o. (target-descriptions.o): Update. (xml-tdesc.o): New rule. * xml-tdesc.c, xml-tdesc.h: New files. * remote.c (PACKET_qXfer_features): New enum. (remote_protocol_features): Add qXfer:features:read. (remote_xfer_partial): Handle TARGET_OBJECT_AVAILABLE_FEATURES. (_initialize_remote): Register qXfer:features:read. * target.h (enum target_object): Add TARGET_OBJECT_AVAILABLE_FEATURES. * features/gdb-target.dtd: New file. * linux-i386-low.c (the_low_target): Set arch_string. * linux-x86-64-low.c (the_low_target): Likewise. * linux-low.c (linux_arch_string): New. (linux_target_ops): Add it. * linux-low.h (struct linux_target_ops): Add arch_string. * server.c (write_qxfer_response): Use const void * for DATA. (get_features_xml): New. (handle_query): Handle qXfer:features:read. Report it for qSupported. * target.h (struct target_ops): Add arch_string method. * gdb.texinfo (Target Descriptions): New section. (General Query Packets): Add QPassSignals anchor. Mention qXfer:features:read under qSupported. Expand mentions of qXfer:memory-map:read and QPassSignals. Document qXfer:features:read.
2007-01-09 23:55:10 +01:00
if (compat1->the_default)
return compat2;
if (compat2->the_default)
return compat1;
/* We have no idea which one is better. This is a bug, but not
a critical problem; warn the user. */
warning (_("Selected architecture %s is ambiguous with "
"reported target architecture %s"),
selected->printable_name, from_target->printable_name);
return selected;
}
/* Functions to manipulate the architecture of the target. */
enum set_arch { set_arch_auto, set_arch_manual };
static const struct bfd_arch_info *target_architecture_user;
static const char *set_architecture_string;
const char *
selected_architecture_name (void)
{
if (target_architecture_user == NULL)
return NULL;
else
return set_architecture_string;
}
/* Called if the user enters ``show architecture'' without an
argument. */
static void
show_architecture (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
if (target_architecture_user == NULL)
2011-01-05 Michael Snyder <msnyder@vmware.com> * addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-05 23:22:53 +01:00
fprintf_filtered (file, _("The target architecture is set "
"automatically (currently %s)\n"),
gdbarch_bfd_arch_info (get_current_arch ())->printable_name);
else
2011-01-05 Michael Snyder <msnyder@vmware.com> * addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-05 23:22:53 +01:00
fprintf_filtered (file, _("The target architecture is assumed to be %s\n"),
set_architecture_string);
}
/* Called if the user enters ``set architecture'' with or without an
argument. */
static void
set_architecture (char *ignore_args, int from_tty, struct cmd_list_element *c)
{
struct gdbarch_info info;
gdbarch_info_init (&info);
if (strcmp (set_architecture_string, "auto") == 0)
{
target_architecture_user = NULL;
if (!gdbarch_update_p (info))
internal_error (__FILE__, __LINE__,
_("could not select an architecture automatically"));
}
else
{
info.bfd_arch_info = bfd_scan_arch (set_architecture_string);
if (info.bfd_arch_info == NULL)
internal_error (__FILE__, __LINE__,
_("set_architecture: bfd_scan_arch failed"));
if (gdbarch_update_p (info))
target_architecture_user = info.bfd_arch_info;
else
printf_unfiltered (_("Architecture `%s' not recognized.\n"),
set_architecture_string);
}
show_architecture (gdb_stdout, from_tty, NULL, NULL);
}
/* Try to select a global architecture that matches "info". Return
non-zero if the attempt succeeds. */
int
gdbarch_update_p (struct gdbarch_info info)
{
struct gdbarch *new_gdbarch;
/* Check for the current file. */
if (info.abfd == NULL)
info.abfd = exec_bfd;
if (info.abfd == NULL)
info.abfd = core_bfd;
/* Check for the current target description. */
if (info.target_desc == NULL)
info.target_desc = target_current_description ();
new_gdbarch = gdbarch_find_by_info (info);
/* If there no architecture by that name, reject the request. */
if (new_gdbarch == NULL)
{
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog, "gdbarch_update_p: "
"Architecture not found\n");
return 0;
}
/* If it is the same old architecture, accept the request (but don't
swap anything). */
if (new_gdbarch == target_gdbarch ())
{
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog, "gdbarch_update_p: "
"Architecture %s (%s) unchanged\n",
host_address_to_string (new_gdbarch),
gdbarch_bfd_arch_info (new_gdbarch)->printable_name);
return 1;
}
/* It's a new architecture, swap it in. */
if (gdbarch_debug)
fprintf_unfiltered (gdb_stdlog, "gdbarch_update_p: "
"New architecture %s (%s) selected\n",
host_address_to_string (new_gdbarch),
gdbarch_bfd_arch_info (new_gdbarch)->printable_name);
set_target_gdbarch (new_gdbarch);
return 1;
}
/* Return the architecture for ABFD. If no suitable architecture
could be find, return NULL. */
struct gdbarch *
gdbarch_from_bfd (bfd *abfd)
{
struct gdbarch_info info;
gdbarch_info_init (&info);
info.abfd = abfd;
return gdbarch_find_by_info (info);
}
/* Set the dynamic target-system-dependent parameters (architecture,
byte-order) using information found in the BFD */
void
set_gdbarch_from_file (bfd *abfd)
{
struct gdbarch_info info;
struct gdbarch *gdbarch;
gdbarch_info_init (&info);
info.abfd = abfd;
info.target_desc = target_current_description ();
gdbarch = gdbarch_find_by_info (info);
if (gdbarch == NULL)
2005-02-10 Andrew Cagney <cagney@gnu.org> Mark up all error and warning messages. * ada-lang.c, amd64-tdep.c, arch-utils.c, breakpoint.c: Update. * bsd-kvm.c, bsd-uthread.c, coff-solib.h, coffread.c: Update. * core-aout.c, core-regset.c, corefile.c, corelow.c: Update. * cp-abi.c, cp-support.c, cp-valprint.c, cris-tdep.c: Update. * dbxread.c, demangle.c, doublest.c, dsrec.c: Update. * dve3900-rom.c, dwarf2expr.c, dwarf2loc.c: Update. * dwarf2read.c, dwarfread.c, elfread.c, eval.c: Update. * event-top.c, exec.c, expprint.c, f-lang.c: Update. * f-typeprint.c, f-valprint.c, fbsd-nat.c, findvar.c: Update. * frame.c, frv-linux-tdep.c, gcore.c, gdbtypes.c: Update. * gnu-nat.c, gnu-v2-abi.c, gnu-v3-abi.c, go32-nat.c: Update. * hpacc-abi.c, hppa-hpux-nat.c, hppa-hpux-tdep.c: Update. * hppa-linux-nat.c, hppa-linux-tdep.c, hppa-tdep.c: Update. * hpread.c, hpux-thread.c, i386-linux-nat.c: Update. * i386-linux-tdep.c, i386-tdep.c, i386bsd-nat.c: Update. * i386gnu-nat.c, i387-tdep.c, ia64-linux-nat.c: Update. * ia64-tdep.c, inf-child.c, inf-ptrace.c, inf-ttrace.c: Update. * infcall.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update. * inftarg.c, interps.c, irix5-nat.c, jv-lang.c: Update. * kod-cisco.c, kod.c, language.c, libunwind-frame.c: Update. * linespec.c, linux-nat.c, linux-thread-db.c, m2-lang.c: Update. * m32r-rom.c, m68hc11-tdep.c, m68k-tdep.c: Update. * m68klinux-nat.c, macrocmd.c, macroexp.c, main.c: Update. * maint.c, mdebugread.c, mem-break.c, memattr.c: Update. * mips-linux-tdep.c, mips-tdep.c, mipsread.c, monitor.c: Update. * nlmread.c, nto-procfs.c, objc-lang.c, objfiles.c: Update. * observer.c, ocd.c, p-lang.c, p-typeprint.c: Update. * p-valprint.c, pa64solib.c, parse.c, ppc-linux-tdep.c: Update. * ppcnbsd-tdep.c, printcmd.c, procfs.c, remote-e7000.c: Update. * remote-fileio.c, remote-m32r-sdi.c, remote-rdi.c: Update. * remote-rdp.c, remote-sim.c, remote-st.c: Update. * remote-utils.c, remote-utils.h, remote.c: Update. * rom68k-rom.c, rs6000-nat.c, s390-tdep.c, scm-lang.c: Update. * ser-e7kpc.c, ser-tcp.c, ser-unix.c, sh-tdep.c: Update. * sh3-rom.c, shnbsd-tdep.c, sol-thread.c, solib-aix5.c: Update. * solib-frv.c, solib-irix.c, solib-osf.c, solib-pa64.c: Update. * solib-som.c, solib-sunos.c, solib-svr4.c, solib.c: Update. * somread.c, somsolib.c, source.c, stabsread.c: Update. * stack.c, std-regs.c, symfile-mem.c, symfile.c: Update. * symmisc.c, symtab.c, target.c, thread.c, top.c: Update. * tracepoint.c, trad-frame.c, typeprint.c, utils.c: Update. * uw-thread.c, valarith.c, valops.c, valprint.c: Update. * value.c, varobj.c, version.in, win32-nat.c, wince.c: Update. * xcoffread.c, xcoffsolib.c, cli/cli-cmds.c: Update. * cli/cli-decode.c, cli/cli-dump.c, cli/cli-logging.c: Update. * cli/cli-script.c, cli/cli-setshow.c, mi/mi-cmd-break.c: Update. * mi/mi-cmd-disas.c, mi/mi-cmd-env.c, mi/mi-cmd-file.c: Update. * mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-getopt.c: Update. * mi/mi-symbol-cmds.c, tui/tui-layout.c, tui/tui-stack.c: Update. * tui/tui-win.c: Update.
2005-02-11 05:06:14 +01:00
error (_("Architecture of file not recognized."));
set_target_gdbarch (gdbarch);
}
/* Initialize the current architecture. Update the ``set
architecture'' command so that it specifies a list of valid
architectures. */
#ifdef DEFAULT_BFD_ARCH
extern const bfd_arch_info_type DEFAULT_BFD_ARCH;
static const bfd_arch_info_type *default_bfd_arch = &DEFAULT_BFD_ARCH;
#else
static const bfd_arch_info_type *default_bfd_arch;
#endif
#ifdef DEFAULT_BFD_VEC
extern const bfd_target DEFAULT_BFD_VEC;
static const bfd_target *default_bfd_vec = &DEFAULT_BFD_VEC;
#else
static const bfd_target *default_bfd_vec;
#endif
static int default_byte_order = BFD_ENDIAN_UNKNOWN;
void
initialize_current_architecture (void)
{
const char **arches = gdbarch_printable_names ();
struct gdbarch_info info;
/* determine a default architecture and byte order. */
gdbarch_info_init (&info);
/* Find a default architecture. */
if (default_bfd_arch == NULL)
{
/* Choose the architecture by taking the first one
alphabetically. */
const char *chosen = arches[0];
const char **arch;
for (arch = arches; *arch != NULL; arch++)
{
if (strcmp (*arch, chosen) < 0)
chosen = *arch;
}
if (chosen == NULL)
internal_error (__FILE__, __LINE__,
_("initialize_current_architecture: No arch"));
default_bfd_arch = bfd_scan_arch (chosen);
if (default_bfd_arch == NULL)
internal_error (__FILE__, __LINE__,
_("initialize_current_architecture: Arch not found"));
}
info.bfd_arch_info = default_bfd_arch;
/* Take several guesses at a byte order. */
if (default_byte_order == BFD_ENDIAN_UNKNOWN
&& default_bfd_vec != NULL)
{
/* Extract BFD's default vector's byte order. */
switch (default_bfd_vec->byteorder)
{
case BFD_ENDIAN_BIG:
default_byte_order = BFD_ENDIAN_BIG;
break;
case BFD_ENDIAN_LITTLE:
default_byte_order = BFD_ENDIAN_LITTLE;
break;
default:
break;
}
}
if (default_byte_order == BFD_ENDIAN_UNKNOWN)
{
/* look for ``*el-*'' in the target name. */
const char *chp;
chp = strchr (target_name, '-');
if (chp != NULL
&& chp - 2 >= target_name
&& startswith (chp - 2, "el"))
default_byte_order = BFD_ENDIAN_LITTLE;
}
if (default_byte_order == BFD_ENDIAN_UNKNOWN)
{
/* Wire it to big-endian!!! */
default_byte_order = BFD_ENDIAN_BIG;
}
info.byte_order = default_byte_order;
info.byte_order_for_code = info.byte_order;
if (! gdbarch_update_p (info))
internal_error (__FILE__, __LINE__,
_("initialize_current_architecture: Selection of "
"initial architecture failed"));
/* Create the ``set architecture'' command appending ``auto'' to the
list of architectures. */
{
/* Append ``auto''. */
int nr;
for (nr = 0; arches[nr] != NULL; nr++);
arches = xrealloc (arches, sizeof (char*) * (nr + 2));
arches[nr + 0] = "auto";
arches[nr + 1] = NULL;
add_setshow_enum_cmd ("architecture", class_support,
2011-01-05 Michael Snyder <msnyder@vmware.com> * addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-05 23:22:53 +01:00
arches, &set_architecture_string,
_("Set architecture of target."),
_("Show architecture of target."), NULL,
set_architecture, show_architecture,
&setlist, &showlist);
add_alias_cmd ("processor", "architecture", class_support, 1, &setlist);
}
}
/* Initialize a gdbarch info to values that will be automatically
overridden. Note: Originally, this ``struct info'' was initialized
using memset(0). Unfortunately, that ran into problems, namely
BFD_ENDIAN_BIG is zero. An explicit initialization function that
can explicitly set each field to a well defined value is used. */
void
gdbarch_info_init (struct gdbarch_info *info)
{
memset (info, 0, sizeof (struct gdbarch_info));
info->byte_order = BFD_ENDIAN_UNKNOWN;
info->byte_order_for_code = info->byte_order;
info->osabi = GDB_OSABI_UNINITIALIZED;
}
/* Similar to init, but this time fill in the blanks. Information is
obtained from the global "set ..." options and explicitly
initialized INFO fields. */
void
gdbarch_info_fill (struct gdbarch_info *info)
{
/* "(gdb) set architecture ...". */
if (info->bfd_arch_info == NULL
&& target_architecture_user)
info->bfd_arch_info = target_architecture_user;
/* From the file. */
if (info->bfd_arch_info == NULL
&& info->abfd != NULL
&& bfd_get_arch (info->abfd) != bfd_arch_unknown
&& bfd_get_arch (info->abfd) != bfd_arch_obscure)
info->bfd_arch_info = bfd_get_arch_info (info->abfd);
XML feature description support. * NEWS: Mention target descriptions, "set tdesc filename", "unset tdesc filename", "show tdesc filename", and qXfer:features:read. * arch-utils.c (choose_architecture_for_target): New function. (gdbarch_info_fill): Call it. * target-descriptions.c (struct property): Make members non-const. (struct target_desc): Add arch member. (target_description_filename): New variable. (target_find_description): Try via XML first. (tdesc_architecture): New. (free_target_description, make_cleanup_free_target_description): New. (set_tdesc_property): Call xstrdup. (set_tdesc_architecture, tdesc_set_cmdlist, tdesc_show_cmdlist) (tdesc_unset_cmdlist, unset_tdesc_cmd, unset_tdesc_filename_cmd) (set_tdesc_cmd, show_tdesc_cmd, set_tdesc_filename_cmd) (show_tdesc_filename_cmd, _initialize_target_descriptions): New. * target-descriptions.h (tdesc_architecture) (make_cleanup_free_target_description, set_tdesc_architecture): New prototypes. * Makefile.in (SFILES): Add xml-tdesc.c. (COMMON_OBS): Add xml-tdesc.o. (target-descriptions.o): Update. (xml-tdesc.o): New rule. * xml-tdesc.c, xml-tdesc.h: New files. * remote.c (PACKET_qXfer_features): New enum. (remote_protocol_features): Add qXfer:features:read. (remote_xfer_partial): Handle TARGET_OBJECT_AVAILABLE_FEATURES. (_initialize_remote): Register qXfer:features:read. * target.h (enum target_object): Add TARGET_OBJECT_AVAILABLE_FEATURES. * features/gdb-target.dtd: New file. * linux-i386-low.c (the_low_target): Set arch_string. * linux-x86-64-low.c (the_low_target): Likewise. * linux-low.c (linux_arch_string): New. (linux_target_ops): Add it. * linux-low.h (struct linux_target_ops): Add arch_string. * server.c (write_qxfer_response): Use const void * for DATA. (get_features_xml): New. (handle_query): Handle qXfer:features:read. Report it for qSupported. * target.h (struct target_ops): Add arch_string method. * gdb.texinfo (Target Descriptions): New section. (General Query Packets): Add QPassSignals anchor. Mention qXfer:features:read under qSupported. Expand mentions of qXfer:memory-map:read and QPassSignals. Document qXfer:features:read.
2007-01-09 23:55:10 +01:00
/* From the target. */
if (info->target_desc != NULL)
info->bfd_arch_info = choose_architecture_for_target
(info->target_desc, info->bfd_arch_info);
/* From the default. */
if (info->bfd_arch_info == NULL)
info->bfd_arch_info = default_bfd_arch;
/* "(gdb) set byte-order ...". */
if (info->byte_order == BFD_ENDIAN_UNKNOWN
&& target_byte_order_user != BFD_ENDIAN_UNKNOWN)
info->byte_order = target_byte_order_user;
/* From the INFO struct. */
if (info->byte_order == BFD_ENDIAN_UNKNOWN
&& info->abfd != NULL)
info->byte_order = (bfd_big_endian (info->abfd) ? BFD_ENDIAN_BIG
: bfd_little_endian (info->abfd) ? BFD_ENDIAN_LITTLE
: BFD_ENDIAN_UNKNOWN);
/* From the default. */
if (info->byte_order == BFD_ENDIAN_UNKNOWN)
info->byte_order = default_byte_order;
info->byte_order_for_code = info->byte_order;
/* "(gdb) set osabi ...". Handled by gdbarch_lookup_osabi. */
2009-07-20 20:51:42 +02:00
/* From the manual override, or from file. */
if (info->osabi == GDB_OSABI_UNINITIALIZED)
info->osabi = gdbarch_lookup_osabi (info->abfd);
2009-07-20 20:51:42 +02:00
/* From the target. */
if (info->osabi == GDB_OSABI_UNKNOWN && info->target_desc != NULL)
info->osabi = tdesc_osabi (info->target_desc);
/* From the configured default. */
#ifdef GDB_OSABI_DEFAULT
2009-07-20 20:51:42 +02:00
if (info->osabi == GDB_OSABI_UNKNOWN)
info->osabi = GDB_OSABI_DEFAULT;
#endif
/* Must have at least filled in the architecture. */
gdb_assert (info->bfd_arch_info != NULL);
}
/* Return "current" architecture. If the target is running, this is
the architecture of the selected frame. Otherwise, the "current"
architecture defaults to the target architecture.
* arch-utils.c (selected_byte_order): Return target_byte_order_user. (show_endian): Use target_byte_order_user if specified; otherwise use get_current_arch () instead of current_gdbarch. (show_architecture): Use set_architecture_string if specified; otherwise use get_current_arch () instead of current_gdbarch. (get_current_arch): New function. * arch-utils.h (get_current_arch): Add prototype. * osabi.c (show_osabi): Use get_current_arch () instead of current_gdbarch. * findcmd.c: Include "arch-utils.h". (parse_find_args): Add BIG_P argument. Use it instead of byte order of current_gdbarch. (find_command): Use get_current_arch () instead of current_gdbarch. Pass byte order to parse_find_args. * maint.c: Include "arch-utils.h". (maintenance_print_architecture): Use get_current_arch () instead of current_gdbarch. * reggroups.c: Include "arch-utils.h". (maintenance_print_reggroups): Use get_current_arch () instead of current_gdbarch. * symfile.c: Include "arch-utils.h". (overlay_load_command): Use get_current_arch () instead of current_gdbarch. * value.c: Include "arch-utils.h". (show_convenience): Use get_current_arch () instead of current_gdbarch. * tui/tui-regs.c: Include "arch-utils.h". (tui_reg_next_command): Use get_current_arch () instead of current_gdbarch. * mi/mi-main.c: Include "arch-utils.h". (mi_cmd_data_read_memory): Use get_current_arch () instead of current_gdbarch. * parse.c: Include "arch-utils.h". (parse_exp_in_context): Use get_current_arch () instead of current_gdbarch.
2009-07-02 19:02:35 +02:00
This function should normally be called solely by the command
interpreter routines to determine the architecture to execute a
command in. */
* arch-utils.c (selected_byte_order): Return target_byte_order_user. (show_endian): Use target_byte_order_user if specified; otherwise use get_current_arch () instead of current_gdbarch. (show_architecture): Use set_architecture_string if specified; otherwise use get_current_arch () instead of current_gdbarch. (get_current_arch): New function. * arch-utils.h (get_current_arch): Add prototype. * osabi.c (show_osabi): Use get_current_arch () instead of current_gdbarch. * findcmd.c: Include "arch-utils.h". (parse_find_args): Add BIG_P argument. Use it instead of byte order of current_gdbarch. (find_command): Use get_current_arch () instead of current_gdbarch. Pass byte order to parse_find_args. * maint.c: Include "arch-utils.h". (maintenance_print_architecture): Use get_current_arch () instead of current_gdbarch. * reggroups.c: Include "arch-utils.h". (maintenance_print_reggroups): Use get_current_arch () instead of current_gdbarch. * symfile.c: Include "arch-utils.h". (overlay_load_command): Use get_current_arch () instead of current_gdbarch. * value.c: Include "arch-utils.h". (show_convenience): Use get_current_arch () instead of current_gdbarch. * tui/tui-regs.c: Include "arch-utils.h". (tui_reg_next_command): Use get_current_arch () instead of current_gdbarch. * mi/mi-main.c: Include "arch-utils.h". (mi_cmd_data_read_memory): Use get_current_arch () instead of current_gdbarch. * parse.c: Include "arch-utils.h". (parse_exp_in_context): Use get_current_arch () instead of current_gdbarch.
2009-07-02 19:02:35 +02:00
struct gdbarch *
get_current_arch (void)
{
if (has_stack_frames ())
return get_frame_arch (get_selected_frame (NULL));
else
return target_gdbarch ();
* arch-utils.c (selected_byte_order): Return target_byte_order_user. (show_endian): Use target_byte_order_user if specified; otherwise use get_current_arch () instead of current_gdbarch. (show_architecture): Use set_architecture_string if specified; otherwise use get_current_arch () instead of current_gdbarch. (get_current_arch): New function. * arch-utils.h (get_current_arch): Add prototype. * osabi.c (show_osabi): Use get_current_arch () instead of current_gdbarch. * findcmd.c: Include "arch-utils.h". (parse_find_args): Add BIG_P argument. Use it instead of byte order of current_gdbarch. (find_command): Use get_current_arch () instead of current_gdbarch. Pass byte order to parse_find_args. * maint.c: Include "arch-utils.h". (maintenance_print_architecture): Use get_current_arch () instead of current_gdbarch. * reggroups.c: Include "arch-utils.h". (maintenance_print_reggroups): Use get_current_arch () instead of current_gdbarch. * symfile.c: Include "arch-utils.h". (overlay_load_command): Use get_current_arch () instead of current_gdbarch. * value.c: Include "arch-utils.h". (show_convenience): Use get_current_arch () instead of current_gdbarch. * tui/tui-regs.c: Include "arch-utils.h". (tui_reg_next_command): Use get_current_arch () instead of current_gdbarch. * mi/mi-main.c: Include "arch-utils.h". (mi_cmd_data_read_memory): Use get_current_arch () instead of current_gdbarch. * parse.c: Include "arch-utils.h". (parse_exp_in_context): Use get_current_arch () instead of current_gdbarch.
2009-07-02 19:02:35 +02:00
}
2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode".
2009-10-19 11:51:43 +02:00
int
default_has_shared_address_space (struct gdbarch *gdbarch)
{
/* Simply say no. In most unix-like targets each inferior/process
has its own address space. */
return 0;
}
Add fast tracepoints. * arch-utils.h (default_fast_tracepoint_valid_at): Declare. * arch-utils.c (default_fast_tracepoint_valid_at): New function. * breakpoint.h (enum bptype): Add bp_fast_tracepoint. * breakpoint.c (tracepoint_type): New function. (ALL_TRACEPOINTS): Use it. (should_be_inserted): Ditto. (bpstat_check_location): Ditto. (print_one_breakpoint_location): Ditto. (user_settable_breakpoint): Ditto. (set_breakpoint_location_function): Ditto. (disable_breakpoints_in_shlibs): Ditto. (delete_trace_command): Ditto. (print_it_typical): Add bp_fast_tracepoint case. (bpstat_what): Ditto. (print_one_breakpoint_location): Ditto. (allocate_bp_location): Ditto. (mention): Ditto. (breakpoint_re_set_one): Ditto. (disable_command): Ditto. (enable_command): Ditto. (check_fast_tracepoint_sals): New function. (break_command_really): Call it. (ftrace_command): New function. (_initialize_breakpoint): Add ftrace command. * gdbarch.sh (fast_tracepoint_valid_at): New. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.c (i386_fast_tracepoint_valid_at): New function. (i386_gdbarch_init): Use it. * remote.c (struct remote_state): New field fast_tracepoints. (PACKET_FastTracepoints): New packet config type. (remote_fast_tracepoint_feature): New function. (remote_protocol_features): Add FastTracepoints. (remote_supports_fast_tracepoints): New function. (_initialize_remote): Add FastTracepoints. * tracepoint.c (download_tracepoint): Add fast tracepoint option. * NEWS: Mention fast tracepoints. * gdb.texinfo (Create and Delete Tracepoints): Describe fast tracepoints. (Tracepoint Packets): Describe remote protocol for fast tracepoints. * gdb.trace/tracecmd.exp: Test ftrace.
2010-01-06 05:20:27 +01:00
int
default_fast_tracepoint_valid_at (struct gdbarch *gdbarch,
CORE_ADDR addr, int *isize, char **msg)
{
/* We don't know if maybe the target has some way to do fast
tracepoints that doesn't need gdbarch, so always say yes. */
if (msg)
*msg = NULL;
return 1;
}
void
default_remote_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr,
int *kindptr)
{
gdbarch_breakpoint_from_pc (gdbarch, pcptr, kindptr);
}
void
default_gen_return_address (struct gdbarch *gdbarch,
struct agent_expr *ax, struct axs_value *value,
CORE_ADDR scope)
{
error (_("This architecture has no method to collect a return address."));
}
int
default_return_in_first_hidden_param_p (struct gdbarch *gdbarch,
struct type *type)
{
/* Usually, the return value's address is stored the in the "first hidden"
parameter if the return value should be passed by reference, as
specified in ABI. */
return language_pass_by_reference (type);
}
int default_insn_is_call (struct gdbarch *gdbarch, CORE_ADDR addr)
{
return 0;
}
int default_insn_is_ret (struct gdbarch *gdbarch, CORE_ADDR addr)
{
return 0;
}
int default_insn_is_jump (struct gdbarch *gdbarch, CORE_ADDR addr)
{
return 0;
}
add a default method for gdbarch_skip_permanent_breakpoint breakpoint.c uses gdbarch_breakpoint_from_pc to determine whether a breakpoint location points at a permanent breakpoint: static int bp_loc_is_permanent (struct bp_location *loc) { ... addr = loc->address; bpoint = gdbarch_breakpoint_from_pc (loc->gdbarch, &addr, &len); ... if (target_read_memory (loc->address, target_mem, len) == 0 && memcmp (target_mem, bpoint, len) == 0) retval = 1; ... So I think we should default the gdbarch_skip_permanent_breakpoint hook to advancing the PC by the length of the breakpoint instruction, as determined by gdbarch_breakpoint_from_pc. I believe that simple implementation does the right thing for most architectures. If there's an oddball architecture where that doesn't work, then it should override the hook, just like it should be overriding the hook if there was no default anyway. The only two implementation of skip_permanent_breakpoint are i386_skip_permanent_breakpoint, for x86, and hppa_skip_permanent_breakpoint, for PA-RISC/HP-UX The x86 implementation is trivial, and can clearly be replaced by the new default. I don't know about the HP-UX one though, I know almost nothing about PA. It may well be advancing the PC ends up being equivalent. Otherwise, it must be that "jump $pc_after_bp" doesn't work either... Tested on x86_64 Fedora 20 native and gdbserver. gdb/ 2014-11-12 Pedro Alves <palves@redhat.com> * arch-utils.c (default_skip_permanent_breakpoint): New function. * arch-utils.h (default_skip_permanent_breakpoint): New declaration. * gdbarch.sh (skip_permanent_breakpoint): Now an 'f' function. Install default_skip_permanent_breakpoint as default method. * i386-tdep.c (i386_skip_permanent_breakpoint): Delete function. (i386_gdbarch_init): Don't install it. * infrun.c (resume): Assume there's always a gdbarch_skip_permanent_breakpoint implementation. * gdbarch.h, gdbarch.c: Regenerate.
2014-11-12 11:10:48 +01:00
void
default_skip_permanent_breakpoint (struct regcache *regcache)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
CORE_ADDR current_pc = regcache_read_pc (regcache);
const gdb_byte *bp_insn;
int bp_len;
bp_insn = gdbarch_breakpoint_from_pc (gdbarch, &current_pc, &bp_len);
current_pc += bp_len;
regcache_write_pc (regcache, current_pc);
}
CORE_ADDR
default_infcall_mmap (CORE_ADDR size, unsigned prot)
{
error (_("This target does not support inferior memory allocation by mmap."));
}
/* -mcmodel=large is used so that no GOT (Global Offset Table) is needed to be
created in inferior memory by GDB (normally it is set by ld.so). */
char *
default_gcc_target_options (struct gdbarch *gdbarch)
{
return xstrprintf ("-m%d%s", gdbarch_ptr_bit (gdbarch),
gdbarch_ptr_bit (gdbarch) == 64 ? " -mcmodel=large" : "");
}
add gnu_triplet_regexp gdbarch method gdb has to inform libcc1.so of the target being used, so that the correct compiler can be invoked. The compiler is invoked using the GNU configury triplet prefix, e.g., "x86_64-unknown-linux-gnu-gcc". In order for this to work we need to map the gdbarch to the GNU configury triplet arch. In most cases these are identical; however, the x86 family poses some problems, as the BFD arch names are quite different from the GNU triplet names. So, we introduce a new gdbarch method for this. A regular expression is used because there are various valid values for the arch prefix in the triplet. This patch also updates the osabi code to associate a regular expression with the OS ABI. I have only added a concrete value for Linux. Note that the "-gnu" part is optional, at least on Fedora it is omitted from the installed GCC executable's name. gdb/ChangeLog 2014-12-12 Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * osabi.h (osabi_triplet_regexp): Declare. * osabi.c (struct osabi_names): New. (gdb_osabi_names): Change type to struct osabi_names. Update values. (gdbarch_osabi_name): Update. (osabi_triplet_regexp): New function. (osabi_from_tdesc_string, _initialize_gdb_osabi): Update. * i386-tdep.c (i386_gnu_triplet_regexp): New method. (i386_elf_init_abi, i386_go32_init_abi, i386_gdbarch_init): Call set_gdbarch_gnu_triplet_regexp. * gdbarch.sh (gnu_triplet_regexp): New method. * gdbarch.c, gdbarch.h: Rebuild. * arch-utils.h (default_gnu_triplet_regexp): Declare. * arch-utils.c (default_gnu_triplet_regexp): New function.
2014-06-13 17:28:24 +02:00
/* gdbarch gnu_triplet_regexp method. */
const char *
default_gnu_triplet_regexp (struct gdbarch *gdbarch)
{
return gdbarch_bfd_arch_info (gdbarch)->arch_name;
}
2011-01-05 Michael Snyder <msnyder@vmware.com> * addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-05 23:22:53 +01:00
/* -Wmissing-prototypes */
extern initialize_file_ftype _initialize_gdbarch_utils;
void
_initialize_gdbarch_utils (void)
{
add_setshow_enum_cmd ("endian", class_support,
2011-01-05 Michael Snyder <msnyder@vmware.com> * addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-05 23:22:53 +01:00
endian_enum, &set_endian_string,
_("Set endianness of target."),
_("Show endianness of target."),
NULL, set_endian, show_endian,
&setlist, &showlist);
}