binutils-gdb/gdb/nat/linux-btrace.h

123 lines
3.3 KiB
C
Raw Normal View History

/* Linux-dependent part of branch trace support for GDB, and GDBserver.
Copyright (C) 2013-2018 Free Software Foundation, Inc.
Contributed by Intel Corp. <markus.t.metzger@intel.com>
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#ifndef LINUX_BTRACE_H
#define LINUX_BTRACE_H
#include "btrace-common.h"
#include "vec.h"
#if HAVE_LINUX_PERF_EVENT_H
# include <linux/perf_event.h>
#endif
struct target_ops;
#if HAVE_LINUX_PERF_EVENT_H
/* A Linux perf event buffer. */
struct perf_event_buffer
{
/* The mapped memory. */
const uint8_t *mem;
/* The size of the mapped memory in bytes. */
size_t size;
/* A pointer to the data_head field for this buffer. */
volatile __u64 *data_head;
/* The data_head value from the last read. */
__u64 last_head;
};
record btrace: add configuration struct Add a struct to describe the branch trace configuration and use it for enabling branch tracing. The user will be able to set configuration fields for each tracing format to be used for new threads. The actual configuration that is active for a given thread will be shown in the "info record" command. At the moment, the configuration struct only contains a format field that is set to the only available format. The format is the only configuration option that can not be set via set commands. It is given as argument to the "record btrace" command when starting recording. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * Makefile.in (XMLFILES): Add btrace-conf.dtd. * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters. (x86_linux_btrace_conf): New. (x86_linux_create_target): Initialize to_btrace_conf. * nat/linux-btrace.c (linux_enable_btrace): Update parameters. Check format. Split into this and ... (linux_enable_bts): ... this. (linux_btrace_conf): New. (perf_event_skip_record): Renamed into ... (perf_event_skip_bts_record): ... this. Updated users. (linux_disable_btrace): Split into this and ... (linux_disable_bts): ... this. (linux_read_btrace): Check format. * nat/linux-btrace.h (linux_enable_btrace): Update parameters. (linux_btrace_conf): New. (btrace_target_info)<ptid>: Moved. (btrace_target_info)<conf>: New. (btrace_target_info): Split into this and ... (btrace_tinfo_bts): ... this. Updated users. * btrace.c (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf) (btrace_conf_children, btrace_conf_attributes) (btrace_conf_elements): New. * btrace.h (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf): New. * common/btrace-common.h (btrace_config): New. * feature/btrace-conf.dtd: New. * record-btrace.c (record_btrace_conf): New. (record_btrace_cmdlist): New. (record_btrace_enable_warn, record_btrace_open): Pass &record_btrace_conf. (record_btrace_info): Print recording format. (cmd_record_btrace_bts_start): New. (cmd_record_btrace_start): Call cmd_record_btrace_bts_start. (_initialize_record_btrace): Add "record btrace bts" subcommand. Add "record bts" alias command. * remote.c (remote_state)<btrace_config>: New. (remote_btrace_reset, PACKET_qXfer_btrace_conf): New. (remote_protocol_features): Add qXfer:btrace-conf:read. (remote_open_1): Call remote_btrace_reset. (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF. (btrace_target_info)<conf>: New. (btrace_sync_conf, btrace_read_config): New. (remote_enable_btrace): Update parameters. Call btrace_sync_conf and btrace_read_conf. (remote_btrace_conf): New. (init_remote_ops): Initialize to_btrace_conf. (_initialize_remote): Add qXfer:btrace-conf packet. * target.c (target_enable_btrace): Update parameters. (target_btrace_conf): New. * target.h (target_enable_btrace): Update parameters. (target_btrace_conf): New. (target_object)<TARGET_OBJECT_BTRACE_CONF>: New. (target_ops)<to_enable_btrace>: Update parameters and comment. (target_ops)<to_btrace_conf>: New. * target-delegates: Regenerate. * target-debug.h (target_debug_print_const_struct_btrace_config_p) (target_debug_print_const_struct_btrace_target_info_p): New. NEWS: Announce new command and new packet. doc/ * gdb.texinfo (Process Record and Replay): Describe the "record btrace bts" command. (General Query Packets): Describe qXfer:btrace-conf:read packet. (Branch Trace Configuration Format): New. gdbserver/ * linux-low.c (linux_low_enable_btrace): Update parameters. (linux_low_btrace_conf): New. (linux_target_ops)<to_btrace_conf>: Initialize. * server.c (current_btrace_conf): New. (handle_btrace_enable): Rename to ... (handle_btrace_enable_bts): ... this. Pass &current_btrace_conf to target_enable_btrace. Update comment. Update users. (handle_qxfer_btrace_conf): New. (qxfer_packets): Add btrace-conf entry. (handle_query): Report qXfer:btrace-conf:read as supported packet. * target.h (target_ops)<enable_btrace>: Update parameters and comment. (target_ops)<read_btrace_conf>: New. (target_enable_btrace): Update parameters. (target_read_btrace_conf): New. testsuite/ * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2013-11-28 15:44:13 +01:00
/* Branch trace target information for BTS tracing. */
struct btrace_tinfo_bts
{
/* The Linux perf_event configuration for collecting the branch trace. */
struct perf_event_attr attr;
/* The perf event file. */
int file;
/* The perf event configuration page. */
volatile struct perf_event_mmap_page *header;
/* The BTS perf event buffer. */
struct perf_event_buffer bts;
record btrace: add configuration struct Add a struct to describe the branch trace configuration and use it for enabling branch tracing. The user will be able to set configuration fields for each tracing format to be used for new threads. The actual configuration that is active for a given thread will be shown in the "info record" command. At the moment, the configuration struct only contains a format field that is set to the only available format. The format is the only configuration option that can not be set via set commands. It is given as argument to the "record btrace" command when starting recording. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * Makefile.in (XMLFILES): Add btrace-conf.dtd. * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters. (x86_linux_btrace_conf): New. (x86_linux_create_target): Initialize to_btrace_conf. * nat/linux-btrace.c (linux_enable_btrace): Update parameters. Check format. Split into this and ... (linux_enable_bts): ... this. (linux_btrace_conf): New. (perf_event_skip_record): Renamed into ... (perf_event_skip_bts_record): ... this. Updated users. (linux_disable_btrace): Split into this and ... (linux_disable_bts): ... this. (linux_read_btrace): Check format. * nat/linux-btrace.h (linux_enable_btrace): Update parameters. (linux_btrace_conf): New. (btrace_target_info)<ptid>: Moved. (btrace_target_info)<conf>: New. (btrace_target_info): Split into this and ... (btrace_tinfo_bts): ... this. Updated users. * btrace.c (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf) (btrace_conf_children, btrace_conf_attributes) (btrace_conf_elements): New. * btrace.h (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf): New. * common/btrace-common.h (btrace_config): New. * feature/btrace-conf.dtd: New. * record-btrace.c (record_btrace_conf): New. (record_btrace_cmdlist): New. (record_btrace_enable_warn, record_btrace_open): Pass &record_btrace_conf. (record_btrace_info): Print recording format. (cmd_record_btrace_bts_start): New. (cmd_record_btrace_start): Call cmd_record_btrace_bts_start. (_initialize_record_btrace): Add "record btrace bts" subcommand. Add "record bts" alias command. * remote.c (remote_state)<btrace_config>: New. (remote_btrace_reset, PACKET_qXfer_btrace_conf): New. (remote_protocol_features): Add qXfer:btrace-conf:read. (remote_open_1): Call remote_btrace_reset. (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF. (btrace_target_info)<conf>: New. (btrace_sync_conf, btrace_read_config): New. (remote_enable_btrace): Update parameters. Call btrace_sync_conf and btrace_read_conf. (remote_btrace_conf): New. (init_remote_ops): Initialize to_btrace_conf. (_initialize_remote): Add qXfer:btrace-conf packet. * target.c (target_enable_btrace): Update parameters. (target_btrace_conf): New. * target.h (target_enable_btrace): Update parameters. (target_btrace_conf): New. (target_object)<TARGET_OBJECT_BTRACE_CONF>: New. (target_ops)<to_enable_btrace>: Update parameters and comment. (target_ops)<to_btrace_conf>: New. * target-delegates: Regenerate. * target-debug.h (target_debug_print_const_struct_btrace_config_p) (target_debug_print_const_struct_btrace_target_info_p): New. NEWS: Announce new command and new packet. doc/ * gdb.texinfo (Process Record and Replay): Describe the "record btrace bts" command. (General Query Packets): Describe qXfer:btrace-conf:read packet. (Branch Trace Configuration Format): New. gdbserver/ * linux-low.c (linux_low_enable_btrace): Update parameters. (linux_low_btrace_conf): New. (linux_target_ops)<to_btrace_conf>: Initialize. * server.c (current_btrace_conf): New. (handle_btrace_enable): Rename to ... (handle_btrace_enable_bts): ... this. Pass &current_btrace_conf to target_enable_btrace. Update comment. Update users. (handle_qxfer_btrace_conf): New. (qxfer_packets): Add btrace-conf entry. (handle_query): Report qXfer:btrace-conf:read as supported packet. * target.h (target_ops)<enable_btrace>: Update parameters and comment. (target_ops)<read_btrace_conf>: New. (target_enable_btrace): Update parameters. (target_read_btrace_conf): New. testsuite/ * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2013-11-28 15:44:13 +01:00
};
btrace: support Intel(R) Processor Trace Adds a new command "record btrace pt" to configure the kernel to use Intel(R) Processor Trace instead of Branch Trace Strore. The "record btrace" command chooses the tracing format automatically. Intel(R) Processor Trace support requires Linux 4.1 and libipt. gdb/ * NEWS: Announce new commands "record btrace pt" and "record pt". Announce new options "set|show record btrace pt buffer-size". * btrace.c: Include "rsp-low.h". Include "inttypes.h". (btrace_add_pc): Add forward declaration. (pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback) (pt_translate_cpu_vendor, btrace_finalize_ftrace_pt) (btrace_compute_ftrace_pt): New. (btrace_compute_ftrace): Support BTRACE_FORMAT_PT. (check_xml_btrace_version): Update version check. (parse_xml_raw, parse_xml_btrace_pt_config_cpu) (parse_xml_btrace_pt_raw, parse_xml_btrace_pt) (btrace_pt_config_cpu_attributes, btrace_pt_config_children) (btrace_pt_children): New. (btrace_children): Add support for "pt". (parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New. (btrace_conf_children): Add support for "pt". * btrace.h: Include "intel-pt.h". (btrace_pt_error): New. * common/btrace-common.c (btrace_format_string, btrace_data_fini) (btrace_data_empty): Support BTRACE_FORMAT_PT. * common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT. (struct btrace_config_pt): New. (struct btrace_config)<pt>: New. (struct btrace_data_pt_config, struct btrace_data_pt): New. (struct btrace_data)<pt>: New. * features/btrace-conf.dtd (btrace-conf)<pt>: New. (pt): New. * features/btrace.dtd (btrace)<pt>: New. (pt, pt-config, cpu): New. * nat/linux-btrace.c (perf_event_read, perf_event_read_all) (perf_event_pt_event_type, kernel_supports_pt) (linux_supports_pt): New. (linux_supports_btrace): Support BTRACE_FORMAT_PT. (linux_enable_bts): Free tinfo on error. (linux_enable_pt): New. (linux_enable_btrace): Support BTRACE_FORMAT_PT. (linux_disable_pt): New. (linux_disable_btrace): Support BTRACE_FORMAT_PT. (linux_fill_btrace_pt_config, linux_read_pt): New. (linux_read_btrace): Support BTRACE_FORMAT_PT. * nat/linux-btrace.h (struct btrace_tinfo_pt): New. (struct btrace_target_info)<pt>: New. * record-btrace.c (set_record_btrace_pt_cmdlist) (show_record_btrace_pt_cmdlist): New. (record_btrace_print_pt_conf): New. (record_btrace_print_conf): Support BTRACE_FORMAT_PT. (btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT. (cmd_record_btrace_pt_start): New. (cmd_record_btrace_start): Support BTRACE_FORMAT_PT. (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New. (_initialize_record_btrace): Add new commands. * remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New. (remote_protocol_features): Add "Qbtrace:pt". Add "Qbtrace-conf:pt:size". (remote_supports_btrace): Support BTRACE_FORMAT_PT. (btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size. (remote_enable_btrace): Support BTRACE_FORMAT_PT. (_initialize_remote): Add new commands. gdbserver/ * linux-low.c: Include "rsp-low.h" (linux_low_encode_pt_config, linux_low_encode_raw): New. (linux_low_read_btrace): Support BTRACE_FORMAT_PT. (linux_low_btrace_conf): Support BTRACE_FORMAT_PT. (handle_btrace_enable_pt): New. (handle_btrace_general_set): Support "pt". (handle_btrace_conf_general_set): Support "pt:size". doc/ * gdb.texinfo (Process Record and Replay): Spell out that variables and registers are not available during btrace replay. Describe the new "record btrace pt" command. Describe the new "set|show record btrace pt buffer-size" options. (General Query Packets): Describe the new Qbtrace:pt and Qbtrace-conf:pt:size packets. Expand "bts" to "Branch Trace Store". Update the branch trace DTD.
2014-01-24 13:45:47 +01:00
/* Branch trace target information for Intel Processor Trace
tracing. */
btrace: support Intel(R) Processor Trace Adds a new command "record btrace pt" to configure the kernel to use Intel(R) Processor Trace instead of Branch Trace Strore. The "record btrace" command chooses the tracing format automatically. Intel(R) Processor Trace support requires Linux 4.1 and libipt. gdb/ * NEWS: Announce new commands "record btrace pt" and "record pt". Announce new options "set|show record btrace pt buffer-size". * btrace.c: Include "rsp-low.h". Include "inttypes.h". (btrace_add_pc): Add forward declaration. (pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback) (pt_translate_cpu_vendor, btrace_finalize_ftrace_pt) (btrace_compute_ftrace_pt): New. (btrace_compute_ftrace): Support BTRACE_FORMAT_PT. (check_xml_btrace_version): Update version check. (parse_xml_raw, parse_xml_btrace_pt_config_cpu) (parse_xml_btrace_pt_raw, parse_xml_btrace_pt) (btrace_pt_config_cpu_attributes, btrace_pt_config_children) (btrace_pt_children): New. (btrace_children): Add support for "pt". (parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New. (btrace_conf_children): Add support for "pt". * btrace.h: Include "intel-pt.h". (btrace_pt_error): New. * common/btrace-common.c (btrace_format_string, btrace_data_fini) (btrace_data_empty): Support BTRACE_FORMAT_PT. * common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT. (struct btrace_config_pt): New. (struct btrace_config)<pt>: New. (struct btrace_data_pt_config, struct btrace_data_pt): New. (struct btrace_data)<pt>: New. * features/btrace-conf.dtd (btrace-conf)<pt>: New. (pt): New. * features/btrace.dtd (btrace)<pt>: New. (pt, pt-config, cpu): New. * nat/linux-btrace.c (perf_event_read, perf_event_read_all) (perf_event_pt_event_type, kernel_supports_pt) (linux_supports_pt): New. (linux_supports_btrace): Support BTRACE_FORMAT_PT. (linux_enable_bts): Free tinfo on error. (linux_enable_pt): New. (linux_enable_btrace): Support BTRACE_FORMAT_PT. (linux_disable_pt): New. (linux_disable_btrace): Support BTRACE_FORMAT_PT. (linux_fill_btrace_pt_config, linux_read_pt): New. (linux_read_btrace): Support BTRACE_FORMAT_PT. * nat/linux-btrace.h (struct btrace_tinfo_pt): New. (struct btrace_target_info)<pt>: New. * record-btrace.c (set_record_btrace_pt_cmdlist) (show_record_btrace_pt_cmdlist): New. (record_btrace_print_pt_conf): New. (record_btrace_print_conf): Support BTRACE_FORMAT_PT. (btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT. (cmd_record_btrace_pt_start): New. (cmd_record_btrace_start): Support BTRACE_FORMAT_PT. (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New. (_initialize_record_btrace): Add new commands. * remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New. (remote_protocol_features): Add "Qbtrace:pt". Add "Qbtrace-conf:pt:size". (remote_supports_btrace): Support BTRACE_FORMAT_PT. (btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size. (remote_enable_btrace): Support BTRACE_FORMAT_PT. (_initialize_remote): Add new commands. gdbserver/ * linux-low.c: Include "rsp-low.h" (linux_low_encode_pt_config, linux_low_encode_raw): New. (linux_low_read_btrace): Support BTRACE_FORMAT_PT. (linux_low_btrace_conf): Support BTRACE_FORMAT_PT. (handle_btrace_enable_pt): New. (handle_btrace_general_set): Support "pt". (handle_btrace_conf_general_set): Support "pt:size". doc/ * gdb.texinfo (Process Record and Replay): Spell out that variables and registers are not available during btrace replay. Describe the new "record btrace pt" command. Describe the new "set|show record btrace pt buffer-size" options. (General Query Packets): Describe the new Qbtrace:pt and Qbtrace-conf:pt:size packets. Expand "bts" to "Branch Trace Store". Update the branch trace DTD.
2014-01-24 13:45:47 +01:00
struct btrace_tinfo_pt
{
/* The Linux perf_event configuration for collecting the branch trace. */
struct perf_event_attr attr;
/* The perf event file. */
int file;
/* The perf event configuration page. */
volatile struct perf_event_mmap_page *header;
/* The trace perf event buffer. */
struct perf_event_buffer pt;
};
record btrace: add configuration struct Add a struct to describe the branch trace configuration and use it for enabling branch tracing. The user will be able to set configuration fields for each tracing format to be used for new threads. The actual configuration that is active for a given thread will be shown in the "info record" command. At the moment, the configuration struct only contains a format field that is set to the only available format. The format is the only configuration option that can not be set via set commands. It is given as argument to the "record btrace" command when starting recording. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * Makefile.in (XMLFILES): Add btrace-conf.dtd. * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters. (x86_linux_btrace_conf): New. (x86_linux_create_target): Initialize to_btrace_conf. * nat/linux-btrace.c (linux_enable_btrace): Update parameters. Check format. Split into this and ... (linux_enable_bts): ... this. (linux_btrace_conf): New. (perf_event_skip_record): Renamed into ... (perf_event_skip_bts_record): ... this. Updated users. (linux_disable_btrace): Split into this and ... (linux_disable_bts): ... this. (linux_read_btrace): Check format. * nat/linux-btrace.h (linux_enable_btrace): Update parameters. (linux_btrace_conf): New. (btrace_target_info)<ptid>: Moved. (btrace_target_info)<conf>: New. (btrace_target_info): Split into this and ... (btrace_tinfo_bts): ... this. Updated users. * btrace.c (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf) (btrace_conf_children, btrace_conf_attributes) (btrace_conf_elements): New. * btrace.h (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf): New. * common/btrace-common.h (btrace_config): New. * feature/btrace-conf.dtd: New. * record-btrace.c (record_btrace_conf): New. (record_btrace_cmdlist): New. (record_btrace_enable_warn, record_btrace_open): Pass &record_btrace_conf. (record_btrace_info): Print recording format. (cmd_record_btrace_bts_start): New. (cmd_record_btrace_start): Call cmd_record_btrace_bts_start. (_initialize_record_btrace): Add "record btrace bts" subcommand. Add "record bts" alias command. * remote.c (remote_state)<btrace_config>: New. (remote_btrace_reset, PACKET_qXfer_btrace_conf): New. (remote_protocol_features): Add qXfer:btrace-conf:read. (remote_open_1): Call remote_btrace_reset. (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF. (btrace_target_info)<conf>: New. (btrace_sync_conf, btrace_read_config): New. (remote_enable_btrace): Update parameters. Call btrace_sync_conf and btrace_read_conf. (remote_btrace_conf): New. (init_remote_ops): Initialize to_btrace_conf. (_initialize_remote): Add qXfer:btrace-conf packet. * target.c (target_enable_btrace): Update parameters. (target_btrace_conf): New. * target.h (target_enable_btrace): Update parameters. (target_btrace_conf): New. (target_object)<TARGET_OBJECT_BTRACE_CONF>: New. (target_ops)<to_enable_btrace>: Update parameters and comment. (target_ops)<to_btrace_conf>: New. * target-delegates: Regenerate. * target-debug.h (target_debug_print_const_struct_btrace_config_p) (target_debug_print_const_struct_btrace_target_info_p): New. NEWS: Announce new command and new packet. doc/ * gdb.texinfo (Process Record and Replay): Describe the "record btrace bts" command. (General Query Packets): Describe qXfer:btrace-conf:read packet. (Branch Trace Configuration Format): New. gdbserver/ * linux-low.c (linux_low_enable_btrace): Update parameters. (linux_low_btrace_conf): New. (linux_target_ops)<to_btrace_conf>: Initialize. * server.c (current_btrace_conf): New. (handle_btrace_enable): Rename to ... (handle_btrace_enable_bts): ... this. Pass &current_btrace_conf to target_enable_btrace. Update comment. Update users. (handle_qxfer_btrace_conf): New. (qxfer_packets): Add btrace-conf entry. (handle_query): Report qXfer:btrace-conf:read as supported packet. * target.h (target_ops)<enable_btrace>: Update parameters and comment. (target_ops)<read_btrace_conf>: New. (target_enable_btrace): Update parameters. (target_read_btrace_conf): New. testsuite/ * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2013-11-28 15:44:13 +01:00
#endif /* HAVE_LINUX_PERF_EVENT_H */
/* Branch trace target information per thread. */
struct btrace_target_info
{
/* The ptid of this thread. */
ptid_t ptid;
/* The obtained branch trace configuration. */
struct btrace_config conf;
#if HAVE_LINUX_PERF_EVENT_H
/* The branch tracing format specific information. */
union
{
/* CONF.FORMAT == BTRACE_FORMAT_BTS. */
struct btrace_tinfo_bts bts;
btrace: support Intel(R) Processor Trace Adds a new command "record btrace pt" to configure the kernel to use Intel(R) Processor Trace instead of Branch Trace Strore. The "record btrace" command chooses the tracing format automatically. Intel(R) Processor Trace support requires Linux 4.1 and libipt. gdb/ * NEWS: Announce new commands "record btrace pt" and "record pt". Announce new options "set|show record btrace pt buffer-size". * btrace.c: Include "rsp-low.h". Include "inttypes.h". (btrace_add_pc): Add forward declaration. (pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback) (pt_translate_cpu_vendor, btrace_finalize_ftrace_pt) (btrace_compute_ftrace_pt): New. (btrace_compute_ftrace): Support BTRACE_FORMAT_PT. (check_xml_btrace_version): Update version check. (parse_xml_raw, parse_xml_btrace_pt_config_cpu) (parse_xml_btrace_pt_raw, parse_xml_btrace_pt) (btrace_pt_config_cpu_attributes, btrace_pt_config_children) (btrace_pt_children): New. (btrace_children): Add support for "pt". (parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New. (btrace_conf_children): Add support for "pt". * btrace.h: Include "intel-pt.h". (btrace_pt_error): New. * common/btrace-common.c (btrace_format_string, btrace_data_fini) (btrace_data_empty): Support BTRACE_FORMAT_PT. * common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT. (struct btrace_config_pt): New. (struct btrace_config)<pt>: New. (struct btrace_data_pt_config, struct btrace_data_pt): New. (struct btrace_data)<pt>: New. * features/btrace-conf.dtd (btrace-conf)<pt>: New. (pt): New. * features/btrace.dtd (btrace)<pt>: New. (pt, pt-config, cpu): New. * nat/linux-btrace.c (perf_event_read, perf_event_read_all) (perf_event_pt_event_type, kernel_supports_pt) (linux_supports_pt): New. (linux_supports_btrace): Support BTRACE_FORMAT_PT. (linux_enable_bts): Free tinfo on error. (linux_enable_pt): New. (linux_enable_btrace): Support BTRACE_FORMAT_PT. (linux_disable_pt): New. (linux_disable_btrace): Support BTRACE_FORMAT_PT. (linux_fill_btrace_pt_config, linux_read_pt): New. (linux_read_btrace): Support BTRACE_FORMAT_PT. * nat/linux-btrace.h (struct btrace_tinfo_pt): New. (struct btrace_target_info)<pt>: New. * record-btrace.c (set_record_btrace_pt_cmdlist) (show_record_btrace_pt_cmdlist): New. (record_btrace_print_pt_conf): New. (record_btrace_print_conf): Support BTRACE_FORMAT_PT. (btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT. (cmd_record_btrace_pt_start): New. (cmd_record_btrace_start): Support BTRACE_FORMAT_PT. (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New. (_initialize_record_btrace): Add new commands. * remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New. (remote_protocol_features): Add "Qbtrace:pt". Add "Qbtrace-conf:pt:size". (remote_supports_btrace): Support BTRACE_FORMAT_PT. (btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size. (remote_enable_btrace): Support BTRACE_FORMAT_PT. (_initialize_remote): Add new commands. gdbserver/ * linux-low.c: Include "rsp-low.h" (linux_low_encode_pt_config, linux_low_encode_raw): New. (linux_low_read_btrace): Support BTRACE_FORMAT_PT. (linux_low_btrace_conf): Support BTRACE_FORMAT_PT. (handle_btrace_enable_pt): New. (handle_btrace_general_set): Support "pt". (handle_btrace_conf_general_set): Support "pt:size". doc/ * gdb.texinfo (Process Record and Replay): Spell out that variables and registers are not available during btrace replay. Describe the new "record btrace pt" command. Describe the new "set|show record btrace pt buffer-size" options. (General Query Packets): Describe the new Qbtrace:pt and Qbtrace-conf:pt:size packets. Expand "bts" to "Branch Trace Store". Update the branch trace DTD.
2014-01-24 13:45:47 +01:00
/* CONF.FORMAT == BTRACE_FORMAT_PT. */
struct btrace_tinfo_pt pt;
record btrace: add configuration struct Add a struct to describe the branch trace configuration and use it for enabling branch tracing. The user will be able to set configuration fields for each tracing format to be used for new threads. The actual configuration that is active for a given thread will be shown in the "info record" command. At the moment, the configuration struct only contains a format field that is set to the only available format. The format is the only configuration option that can not be set via set commands. It is given as argument to the "record btrace" command when starting recording. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * Makefile.in (XMLFILES): Add btrace-conf.dtd. * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters. (x86_linux_btrace_conf): New. (x86_linux_create_target): Initialize to_btrace_conf. * nat/linux-btrace.c (linux_enable_btrace): Update parameters. Check format. Split into this and ... (linux_enable_bts): ... this. (linux_btrace_conf): New. (perf_event_skip_record): Renamed into ... (perf_event_skip_bts_record): ... this. Updated users. (linux_disable_btrace): Split into this and ... (linux_disable_bts): ... this. (linux_read_btrace): Check format. * nat/linux-btrace.h (linux_enable_btrace): Update parameters. (linux_btrace_conf): New. (btrace_target_info)<ptid>: Moved. (btrace_target_info)<conf>: New. (btrace_target_info): Split into this and ... (btrace_tinfo_bts): ... this. Updated users. * btrace.c (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf) (btrace_conf_children, btrace_conf_attributes) (btrace_conf_elements): New. * btrace.h (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf): New. * common/btrace-common.h (btrace_config): New. * feature/btrace-conf.dtd: New. * record-btrace.c (record_btrace_conf): New. (record_btrace_cmdlist): New. (record_btrace_enable_warn, record_btrace_open): Pass &record_btrace_conf. (record_btrace_info): Print recording format. (cmd_record_btrace_bts_start): New. (cmd_record_btrace_start): Call cmd_record_btrace_bts_start. (_initialize_record_btrace): Add "record btrace bts" subcommand. Add "record bts" alias command. * remote.c (remote_state)<btrace_config>: New. (remote_btrace_reset, PACKET_qXfer_btrace_conf): New. (remote_protocol_features): Add qXfer:btrace-conf:read. (remote_open_1): Call remote_btrace_reset. (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF. (btrace_target_info)<conf>: New. (btrace_sync_conf, btrace_read_config): New. (remote_enable_btrace): Update parameters. Call btrace_sync_conf and btrace_read_conf. (remote_btrace_conf): New. (init_remote_ops): Initialize to_btrace_conf. (_initialize_remote): Add qXfer:btrace-conf packet. * target.c (target_enable_btrace): Update parameters. (target_btrace_conf): New. * target.h (target_enable_btrace): Update parameters. (target_btrace_conf): New. (target_object)<TARGET_OBJECT_BTRACE_CONF>: New. (target_ops)<to_enable_btrace>: Update parameters and comment. (target_ops)<to_btrace_conf>: New. * target-delegates: Regenerate. * target-debug.h (target_debug_print_const_struct_btrace_config_p) (target_debug_print_const_struct_btrace_target_info_p): New. NEWS: Announce new command and new packet. doc/ * gdb.texinfo (Process Record and Replay): Describe the "record btrace bts" command. (General Query Packets): Describe qXfer:btrace-conf:read packet. (Branch Trace Configuration Format): New. gdbserver/ * linux-low.c (linux_low_enable_btrace): Update parameters. (linux_low_btrace_conf): New. (linux_target_ops)<to_btrace_conf>: Initialize. * server.c (current_btrace_conf): New. (handle_btrace_enable): Rename to ... (handle_btrace_enable_bts): ... this. Pass &current_btrace_conf to target_enable_btrace. Update comment. Update users. (handle_qxfer_btrace_conf): New. (qxfer_packets): Add btrace-conf entry. (handle_query): Report qXfer:btrace-conf:read as supported packet. * target.h (target_ops)<enable_btrace>: Update parameters and comment. (target_ops)<read_btrace_conf>: New. (target_enable_btrace): Update parameters. (target_read_btrace_conf): New. testsuite/ * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2013-11-28 15:44:13 +01:00
} variant;
#endif /* HAVE_LINUX_PERF_EVENT_H */
};
btrace, gdbserver: read branch trace incrementally Read branch trace data incrementally and extend the current trace rather than discarding it and reading the entire trace buffer each time. If the branch trace buffer overflowed, we can't extend the current trace so we discard it and start anew by reading the entire branch trace buffer. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace): Support delta reads. (linux_disable_btrace): Change return type. * common/linux-btrace.h (linux_read_btrace): Change parameters and return type to allow error reporting. Update users. (linux_disable_btrace): Change return type. Update users. * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>: New. (btrace_error): New. (btrace_block) <begin>: Comment on BEGIN == 0. * btrace.c (btrace_compute_ftrace): Start from the end of the current trace. (btrace_stitch_trace, btrace_clear_history): New. (btrace_fetch): Read delta trace, return if replaying. (btrace_clear): Move clear history code to btrace_clear_history. (parse_xml_btrace): Throw an error if parsing failed. * target.h (struct target_ops) <to_read_btrace>: Change parameters and return type to allow error reporting. (target_read_btrace): Change parameters and return type to allow error reporting. * target.c (target_read_btrace): Update. * remote.c (remote_read_btrace): Support delta reads. Pass errors on. * NEWS: Announce it. gdbserver/ * target.h (target_ops) <read_btrace>: Change parameters and return type to allow error reporting. * server.c (handle_qxfer_btrace): Support delta reads. Pass trace reading errors on. * linux-low.c (linux_low_read_btrace): Pass trace reading errors on. (linux_low_disable_btrace): New.
2013-06-03 15:39:35 +02:00
/* See to_enable_btrace in target.h. */
record btrace: add configuration struct Add a struct to describe the branch trace configuration and use it for enabling branch tracing. The user will be able to set configuration fields for each tracing format to be used for new threads. The actual configuration that is active for a given thread will be shown in the "info record" command. At the moment, the configuration struct only contains a format field that is set to the only available format. The format is the only configuration option that can not be set via set commands. It is given as argument to the "record btrace" command when starting recording. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * Makefile.in (XMLFILES): Add btrace-conf.dtd. * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters. (x86_linux_btrace_conf): New. (x86_linux_create_target): Initialize to_btrace_conf. * nat/linux-btrace.c (linux_enable_btrace): Update parameters. Check format. Split into this and ... (linux_enable_bts): ... this. (linux_btrace_conf): New. (perf_event_skip_record): Renamed into ... (perf_event_skip_bts_record): ... this. Updated users. (linux_disable_btrace): Split into this and ... (linux_disable_bts): ... this. (linux_read_btrace): Check format. * nat/linux-btrace.h (linux_enable_btrace): Update parameters. (linux_btrace_conf): New. (btrace_target_info)<ptid>: Moved. (btrace_target_info)<conf>: New. (btrace_target_info): Split into this and ... (btrace_tinfo_bts): ... this. Updated users. * btrace.c (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf) (btrace_conf_children, btrace_conf_attributes) (btrace_conf_elements): New. * btrace.h (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf): New. * common/btrace-common.h (btrace_config): New. * feature/btrace-conf.dtd: New. * record-btrace.c (record_btrace_conf): New. (record_btrace_cmdlist): New. (record_btrace_enable_warn, record_btrace_open): Pass &record_btrace_conf. (record_btrace_info): Print recording format. (cmd_record_btrace_bts_start): New. (cmd_record_btrace_start): Call cmd_record_btrace_bts_start. (_initialize_record_btrace): Add "record btrace bts" subcommand. Add "record bts" alias command. * remote.c (remote_state)<btrace_config>: New. (remote_btrace_reset, PACKET_qXfer_btrace_conf): New. (remote_protocol_features): Add qXfer:btrace-conf:read. (remote_open_1): Call remote_btrace_reset. (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF. (btrace_target_info)<conf>: New. (btrace_sync_conf, btrace_read_config): New. (remote_enable_btrace): Update parameters. Call btrace_sync_conf and btrace_read_conf. (remote_btrace_conf): New. (init_remote_ops): Initialize to_btrace_conf. (_initialize_remote): Add qXfer:btrace-conf packet. * target.c (target_enable_btrace): Update parameters. (target_btrace_conf): New. * target.h (target_enable_btrace): Update parameters. (target_btrace_conf): New. (target_object)<TARGET_OBJECT_BTRACE_CONF>: New. (target_ops)<to_enable_btrace>: Update parameters and comment. (target_ops)<to_btrace_conf>: New. * target-delegates: Regenerate. * target-debug.h (target_debug_print_const_struct_btrace_config_p) (target_debug_print_const_struct_btrace_target_info_p): New. NEWS: Announce new command and new packet. doc/ * gdb.texinfo (Process Record and Replay): Describe the "record btrace bts" command. (General Query Packets): Describe qXfer:btrace-conf:read packet. (Branch Trace Configuration Format): New. gdbserver/ * linux-low.c (linux_low_enable_btrace): Update parameters. (linux_low_btrace_conf): New. (linux_target_ops)<to_btrace_conf>: Initialize. * server.c (current_btrace_conf): New. (handle_btrace_enable): Rename to ... (handle_btrace_enable_bts): ... this. Pass &current_btrace_conf to target_enable_btrace. Update comment. Update users. (handle_qxfer_btrace_conf): New. (qxfer_packets): Add btrace-conf entry. (handle_query): Report qXfer:btrace-conf:read as supported packet. * target.h (target_ops)<enable_btrace>: Update parameters and comment. (target_ops)<read_btrace_conf>: New. (target_enable_btrace): Update parameters. (target_read_btrace_conf): New. testsuite/ * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2013-11-28 15:44:13 +01:00
extern struct btrace_target_info *
linux_enable_btrace (ptid_t ptid, const struct btrace_config *conf);
btrace, gdbserver: read branch trace incrementally Read branch trace data incrementally and extend the current trace rather than discarding it and reading the entire trace buffer each time. If the branch trace buffer overflowed, we can't extend the current trace so we discard it and start anew by reading the entire branch trace buffer. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace): Support delta reads. (linux_disable_btrace): Change return type. * common/linux-btrace.h (linux_read_btrace): Change parameters and return type to allow error reporting. Update users. (linux_disable_btrace): Change return type. Update users. * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>: New. (btrace_error): New. (btrace_block) <begin>: Comment on BEGIN == 0. * btrace.c (btrace_compute_ftrace): Start from the end of the current trace. (btrace_stitch_trace, btrace_clear_history): New. (btrace_fetch): Read delta trace, return if replaying. (btrace_clear): Move clear history code to btrace_clear_history. (parse_xml_btrace): Throw an error if parsing failed. * target.h (struct target_ops) <to_read_btrace>: Change parameters and return type to allow error reporting. (target_read_btrace): Change parameters and return type to allow error reporting. * target.c (target_read_btrace): Update. * remote.c (remote_read_btrace): Support delta reads. Pass errors on. * NEWS: Announce it. gdbserver/ * target.h (target_ops) <read_btrace>: Change parameters and return type to allow error reporting. * server.c (handle_qxfer_btrace): Support delta reads. Pass trace reading errors on. * linux-low.c (linux_low_read_btrace): Pass trace reading errors on. (linux_low_disable_btrace): New.
2013-06-03 15:39:35 +02:00
/* See to_disable_btrace in target.h. */
extern enum btrace_error linux_disable_btrace (struct btrace_target_info *ti);
btrace, gdbserver: read branch trace incrementally Read branch trace data incrementally and extend the current trace rather than discarding it and reading the entire trace buffer each time. If the branch trace buffer overflowed, we can't extend the current trace so we discard it and start anew by reading the entire branch trace buffer. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace): Support delta reads. (linux_disable_btrace): Change return type. * common/linux-btrace.h (linux_read_btrace): Change parameters and return type to allow error reporting. Update users. (linux_disable_btrace): Change return type. Update users. * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>: New. (btrace_error): New. (btrace_block) <begin>: Comment on BEGIN == 0. * btrace.c (btrace_compute_ftrace): Start from the end of the current trace. (btrace_stitch_trace, btrace_clear_history): New. (btrace_fetch): Read delta trace, return if replaying. (btrace_clear): Move clear history code to btrace_clear_history. (parse_xml_btrace): Throw an error if parsing failed. * target.h (struct target_ops) <to_read_btrace>: Change parameters and return type to allow error reporting. (target_read_btrace): Change parameters and return type to allow error reporting. * target.c (target_read_btrace): Update. * remote.c (remote_read_btrace): Support delta reads. Pass errors on. * NEWS: Announce it. gdbserver/ * target.h (target_ops) <read_btrace>: Change parameters and return type to allow error reporting. * server.c (handle_qxfer_btrace): Support delta reads. Pass trace reading errors on. * linux-low.c (linux_low_read_btrace): Pass trace reading errors on. (linux_low_disable_btrace): New.
2013-06-03 15:39:35 +02:00
/* See to_read_btrace in target.h. */
btrace: add struct btrace_data Add a structure to hold the branch trace data and an enum to describe the format of that data. So far, only BTS is supported. Also added a NONE format to indicate that no branch trace data is available. This will make it easier to support different branch trace formats in the future. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * Makefile.in (SFILES): Add common/btrace-common.c. (COMMON_OBS): Add common/btrace-common.o. (btrace-common.o): Add build rules. * btrace.c (parse_xml_btrace): Update parameters. (parse_xml_btrace_block): Set format field. (btrace_add_pc, btrace_fetch): Use struct btrace_data. (do_btrace_data_cleanup, make_cleanup_btrace_data): New. (btrace_compute_ftrace): Split into this and... (btrace_compute_ftrace_bts): ...this. (btrace_stitch_trace): Split into this and... (btrace_stitch_bts): ...this. * btrace.h (parse_xml_btrace): Update parameters. (make_cleanup_btrace_data): New. * common/btrace-common.c: New. * common/btrace-common.h: Include common-defs.h. (btrace_block_s): Update comment. (btrace_format): New. (btrace_format_string): New. (btrace_data_bts): New. (btrace_data): New. (btrace_data_init, btrace_data_fini, btrace_data_empty): New. * remote.c (remote_read_btrace): Update parameters. * target.c (target_read_btrace): Update parameters. * target.h (target_read_btrace): Update parameters. (target_ops)<to_read_btrace>: Update parameters. * x86-linux-nat.c (x86_linux_read_btrace): Update parameters. * target-delegates.c: Regenerate. * target-debug (target_debug_print_struct_btrace_data_p): New. * nat/linux-btrace.c (linux_read_btrace): Split into this and... (linux_read_bts): ...this. * nat/linux-btrace.h (linux_read_btrace): Update parameters. gdbserver/ * Makefile.in (SFILES): Add common/btrace-common.c. (OBS): Add common/btrace-common.o. (btrace-common.o): Add build rules. * linux-low: Include btrace-common.h. (linux_low_read_btrace): Use struct btrace_data. Call btrace_data_init and btrace_data_fini.
2013-11-13 15:31:07 +01:00
extern enum btrace_error linux_read_btrace (struct btrace_data *btrace,
btrace, gdbserver: read branch trace incrementally Read branch trace data incrementally and extend the current trace rather than discarding it and reading the entire trace buffer each time. If the branch trace buffer overflowed, we can't extend the current trace so we discard it and start anew by reading the entire branch trace buffer. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * common/linux-btrace.c (perf_event_read_bts, linux_read_btrace): Support delta reads. (linux_disable_btrace): Change return type. * common/linux-btrace.h (linux_read_btrace): Change parameters and return type to allow error reporting. Update users. (linux_disable_btrace): Change return type. Update users. * common/btrace-common.h (btrace_read_type) <BTRACE_READ_DELTA>: New. (btrace_error): New. (btrace_block) <begin>: Comment on BEGIN == 0. * btrace.c (btrace_compute_ftrace): Start from the end of the current trace. (btrace_stitch_trace, btrace_clear_history): New. (btrace_fetch): Read delta trace, return if replaying. (btrace_clear): Move clear history code to btrace_clear_history. (parse_xml_btrace): Throw an error if parsing failed. * target.h (struct target_ops) <to_read_btrace>: Change parameters and return type to allow error reporting. (target_read_btrace): Change parameters and return type to allow error reporting. * target.c (target_read_btrace): Update. * remote.c (remote_read_btrace): Support delta reads. Pass errors on. * NEWS: Announce it. gdbserver/ * target.h (target_ops) <read_btrace>: Change parameters and return type to allow error reporting. * server.c (handle_qxfer_btrace): Support delta reads. Pass trace reading errors on. * linux-low.c (linux_low_read_btrace): Pass trace reading errors on. (linux_low_disable_btrace): New.
2013-06-03 15:39:35 +02:00
struct btrace_target_info *btinfo,
enum btrace_read_type type);
record btrace: add configuration struct Add a struct to describe the branch trace configuration and use it for enabling branch tracing. The user will be able to set configuration fields for each tracing format to be used for new threads. The actual configuration that is active for a given thread will be shown in the "info record" command. At the moment, the configuration struct only contains a format field that is set to the only available format. The format is the only configuration option that can not be set via set commands. It is given as argument to the "record btrace" command when starting recording. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * Makefile.in (XMLFILES): Add btrace-conf.dtd. * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters. (x86_linux_btrace_conf): New. (x86_linux_create_target): Initialize to_btrace_conf. * nat/linux-btrace.c (linux_enable_btrace): Update parameters. Check format. Split into this and ... (linux_enable_bts): ... this. (linux_btrace_conf): New. (perf_event_skip_record): Renamed into ... (perf_event_skip_bts_record): ... this. Updated users. (linux_disable_btrace): Split into this and ... (linux_disable_bts): ... this. (linux_read_btrace): Check format. * nat/linux-btrace.h (linux_enable_btrace): Update parameters. (linux_btrace_conf): New. (btrace_target_info)<ptid>: Moved. (btrace_target_info)<conf>: New. (btrace_target_info): Split into this and ... (btrace_tinfo_bts): ... this. Updated users. * btrace.c (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf) (btrace_conf_children, btrace_conf_attributes) (btrace_conf_elements): New. * btrace.h (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf): New. * common/btrace-common.h (btrace_config): New. * feature/btrace-conf.dtd: New. * record-btrace.c (record_btrace_conf): New. (record_btrace_cmdlist): New. (record_btrace_enable_warn, record_btrace_open): Pass &record_btrace_conf. (record_btrace_info): Print recording format. (cmd_record_btrace_bts_start): New. (cmd_record_btrace_start): Call cmd_record_btrace_bts_start. (_initialize_record_btrace): Add "record btrace bts" subcommand. Add "record bts" alias command. * remote.c (remote_state)<btrace_config>: New. (remote_btrace_reset, PACKET_qXfer_btrace_conf): New. (remote_protocol_features): Add qXfer:btrace-conf:read. (remote_open_1): Call remote_btrace_reset. (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF. (btrace_target_info)<conf>: New. (btrace_sync_conf, btrace_read_config): New. (remote_enable_btrace): Update parameters. Call btrace_sync_conf and btrace_read_conf. (remote_btrace_conf): New. (init_remote_ops): Initialize to_btrace_conf. (_initialize_remote): Add qXfer:btrace-conf packet. * target.c (target_enable_btrace): Update parameters. (target_btrace_conf): New. * target.h (target_enable_btrace): Update parameters. (target_btrace_conf): New. (target_object)<TARGET_OBJECT_BTRACE_CONF>: New. (target_ops)<to_enable_btrace>: Update parameters and comment. (target_ops)<to_btrace_conf>: New. * target-delegates: Regenerate. * target-debug.h (target_debug_print_const_struct_btrace_config_p) (target_debug_print_const_struct_btrace_target_info_p): New. NEWS: Announce new command and new packet. doc/ * gdb.texinfo (Process Record and Replay): Describe the "record btrace bts" command. (General Query Packets): Describe qXfer:btrace-conf:read packet. (Branch Trace Configuration Format): New. gdbserver/ * linux-low.c (linux_low_enable_btrace): Update parameters. (linux_low_btrace_conf): New. (linux_target_ops)<to_btrace_conf>: Initialize. * server.c (current_btrace_conf): New. (handle_btrace_enable): Rename to ... (handle_btrace_enable_bts): ... this. Pass &current_btrace_conf to target_enable_btrace. Update comment. Update users. (handle_qxfer_btrace_conf): New. (qxfer_packets): Add btrace-conf entry. (handle_query): Report qXfer:btrace-conf:read as supported packet. * target.h (target_ops)<enable_btrace>: Update parameters and comment. (target_ops)<read_btrace_conf>: New. (target_enable_btrace): Update parameters. (target_read_btrace_conf): New. testsuite/ * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2013-11-28 15:44:13 +01:00
/* See to_btrace_conf in target.h. */
extern const struct btrace_config *
linux_btrace_conf (const struct btrace_target_info *);
#endif /* LINUX_BTRACE_H */