Fix PR c++/21323: GDB thinks char16_t and char32_t are signed in C++
While the C++ standard says that char16_t and char32_t are unsigned types:
Types char16_t and char32_t denote distinct types with the same size,
signedness, and alignment as uint_least16_t and uint_least32_t,
respectively, in <cstdint>, called the underlying types.
... gdb treats them as signed currently:
(gdb) p (char16_t)-1
$1 = -1 u'\xffff'
There are actually two places in gdb that hardcode these types:
- gdbtypes.c:gdbtypes_post_init, when creating the built-in types,
seemingly used by the "x /s" command (judging from commit 9a22f0d0).
- dwarf2read.c, when reading base types with DW_ATE_UTF encoding
(which is what is used for these types, when compiling for C++11 and
up). Despite the comment, the type created does end up used.
Both places need fixing. But since I couldn't tell why dwarf2read.c
needs to create a new type, I've made it use the per-arch built-in
types instead, so that the types are only created once per arch
instead of once per objfile. That seems to work fine.
While writting the test, I noticed that the C++ language parser isn't
actually aware of these built-in types, so if you try to use them
without a program that uses them, you get:
(gdb) set language c++
(gdb) ptype char16_t
No symbol table is loaded. Use the "file" command.
(gdb) ptype u"hello"
No type named char16_t.
(gdb) p u"hello"
No type named char16_t.
That's fixed by simply adding a couple entries to C++'s built-in types
array in c-lang.c. With that, we get the expected:
(gdb) ptype char16_t
type = char16_t
(gdb) ptype u"hello"
type = char16_t [6]
(gdb) p u"hello"
$1 = u"hello"
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_char16_t,
cplus_primitive_type_char32_t>: New enum values.
(cplus_language_arch_info): Register cplus_primitive_type_char16_t
and cplus_primitive_type_char32_t.
* dwarf2read.c (read_base_type) <DW_ATE_UTF>: If bit size is 16 or
32, use the archtecture's built-in type for char16_t and char32_t,
respectively. Otherwise, fallback to init_integer_type as before,
but make the type unsigned, and issue a complaint.
* gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* gdb.cp/wide_char_types.c: New file.
* gdb.cp/wide_char_types.exp: New file.
2017-04-12 15:00:49 +02:00
|
|
|
# This testcase is part of GDB, the GNU debugger.
|
|
|
|
|
2020-01-01 07:20:01 +01:00
|
|
|
# Copyright 2017-2020 Free Software Foundation, Inc.
|
Fix PR c++/21323: GDB thinks char16_t and char32_t are signed in C++
While the C++ standard says that char16_t and char32_t are unsigned types:
Types char16_t and char32_t denote distinct types with the same size,
signedness, and alignment as uint_least16_t and uint_least32_t,
respectively, in <cstdint>, called the underlying types.
... gdb treats them as signed currently:
(gdb) p (char16_t)-1
$1 = -1 u'\xffff'
There are actually two places in gdb that hardcode these types:
- gdbtypes.c:gdbtypes_post_init, when creating the built-in types,
seemingly used by the "x /s" command (judging from commit 9a22f0d0).
- dwarf2read.c, when reading base types with DW_ATE_UTF encoding
(which is what is used for these types, when compiling for C++11 and
up). Despite the comment, the type created does end up used.
Both places need fixing. But since I couldn't tell why dwarf2read.c
needs to create a new type, I've made it use the per-arch built-in
types instead, so that the types are only created once per arch
instead of once per objfile. That seems to work fine.
While writting the test, I noticed that the C++ language parser isn't
actually aware of these built-in types, so if you try to use them
without a program that uses them, you get:
(gdb) set language c++
(gdb) ptype char16_t
No symbol table is loaded. Use the "file" command.
(gdb) ptype u"hello"
No type named char16_t.
(gdb) p u"hello"
No type named char16_t.
That's fixed by simply adding a couple entries to C++'s built-in types
array in c-lang.c. With that, we get the expected:
(gdb) ptype char16_t
type = char16_t
(gdb) ptype u"hello"
type = char16_t [6]
(gdb) p u"hello"
$1 = u"hello"
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_char16_t,
cplus_primitive_type_char32_t>: New enum values.
(cplus_language_arch_info): Register cplus_primitive_type_char16_t
and cplus_primitive_type_char32_t.
* dwarf2read.c (read_base_type) <DW_ATE_UTF>: If bit size is 16 or
32, use the archtecture's built-in type for char16_t and char32_t,
respectively. Otherwise, fallback to init_integer_type as before,
but make the type unsigned, and issue a complaint.
* gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* gdb.cp/wide_char_types.c: New file.
* gdb.cp/wide_char_types.exp: New file.
2017-04-12 15:00:49 +02:00
|
|
|
|
|
|
|
# This program is free software; you can redistribute it and/or modify
|
|
|
|
# it under the terms of the GNU General Public License as published by
|
|
|
|
# the Free Software Foundation; either version 3 of the License, or
|
|
|
|
# (at your option) any later version.
|
|
|
|
#
|
|
|
|
# This program is distributed in the hope that it will be useful,
|
|
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
# GNU General Public License for more details.
|
|
|
|
#
|
|
|
|
# You should have received a copy of the GNU General Public License
|
|
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
|
Teach GDB that wchar_t is a built-in type in C++ mode
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
2017-04-12 15:00:49 +02:00
|
|
|
# Test GDB's awareness of the wchar_t (C++98+) and char16_t, char32_t
|
|
|
|
# (C++11+) built-in types. We also run most tests here in C mode, and
|
|
|
|
# check whether the built-ins are disabled (gdb uses the typedefs in
|
|
|
|
# the debug info instead.)
|
Fix PR c++/21323: GDB thinks char16_t and char32_t are signed in C++
While the C++ standard says that char16_t and char32_t are unsigned types:
Types char16_t and char32_t denote distinct types with the same size,
signedness, and alignment as uint_least16_t and uint_least32_t,
respectively, in <cstdint>, called the underlying types.
... gdb treats them as signed currently:
(gdb) p (char16_t)-1
$1 = -1 u'\xffff'
There are actually two places in gdb that hardcode these types:
- gdbtypes.c:gdbtypes_post_init, when creating the built-in types,
seemingly used by the "x /s" command (judging from commit 9a22f0d0).
- dwarf2read.c, when reading base types with DW_ATE_UTF encoding
(which is what is used for these types, when compiling for C++11 and
up). Despite the comment, the type created does end up used.
Both places need fixing. But since I couldn't tell why dwarf2read.c
needs to create a new type, I've made it use the per-arch built-in
types instead, so that the types are only created once per arch
instead of once per objfile. That seems to work fine.
While writting the test, I noticed that the C++ language parser isn't
actually aware of these built-in types, so if you try to use them
without a program that uses them, you get:
(gdb) set language c++
(gdb) ptype char16_t
No symbol table is loaded. Use the "file" command.
(gdb) ptype u"hello"
No type named char16_t.
(gdb) p u"hello"
No type named char16_t.
That's fixed by simply adding a couple entries to C++'s built-in types
array in c-lang.c. With that, we get the expected:
(gdb) ptype char16_t
type = char16_t
(gdb) ptype u"hello"
type = char16_t [6]
(gdb) p u"hello"
$1 = u"hello"
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_char16_t,
cplus_primitive_type_char32_t>: New enum values.
(cplus_language_arch_info): Register cplus_primitive_type_char16_t
and cplus_primitive_type_char32_t.
* dwarf2read.c (read_base_type) <DW_ATE_UTF>: If bit size is 16 or
32, use the archtecture's built-in type for char16_t and char32_t,
respectively. Otherwise, fallback to init_integer_type as before,
but make the type unsigned, and issue a complaint.
* gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* gdb.cp/wide_char_types.c: New file.
* gdb.cp/wide_char_types.exp: New file.
2017-04-12 15:00:49 +02:00
|
|
|
|
|
|
|
standard_testfile
|
|
|
|
|
Teach GDB that wchar_t is a built-in type in C++ mode
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
2017-04-12 15:00:49 +02:00
|
|
|
# Test char16_t/char32_t/wchar_t in language LANG, against symbols in
|
Fix PR c++/21323: GDB thinks char16_t and char32_t are signed in C++
While the C++ standard says that char16_t and char32_t are unsigned types:
Types char16_t and char32_t denote distinct types with the same size,
signedness, and alignment as uint_least16_t and uint_least32_t,
respectively, in <cstdint>, called the underlying types.
... gdb treats them as signed currently:
(gdb) p (char16_t)-1
$1 = -1 u'\xffff'
There are actually two places in gdb that hardcode these types:
- gdbtypes.c:gdbtypes_post_init, when creating the built-in types,
seemingly used by the "x /s" command (judging from commit 9a22f0d0).
- dwarf2read.c, when reading base types with DW_ATE_UTF encoding
(which is what is used for these types, when compiling for C++11 and
up). Despite the comment, the type created does end up used.
Both places need fixing. But since I couldn't tell why dwarf2read.c
needs to create a new type, I've made it use the per-arch built-in
types instead, so that the types are only created once per arch
instead of once per objfile. That seems to work fine.
While writting the test, I noticed that the C++ language parser isn't
actually aware of these built-in types, so if you try to use them
without a program that uses them, you get:
(gdb) set language c++
(gdb) ptype char16_t
No symbol table is loaded. Use the "file" command.
(gdb) ptype u"hello"
No type named char16_t.
(gdb) p u"hello"
No type named char16_t.
That's fixed by simply adding a couple entries to C++'s built-in types
array in c-lang.c. With that, we get the expected:
(gdb) ptype char16_t
type = char16_t
(gdb) ptype u"hello"
type = char16_t [6]
(gdb) p u"hello"
$1 = u"hello"
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_char16_t,
cplus_primitive_type_char32_t>: New enum values.
(cplus_language_arch_info): Register cplus_primitive_type_char16_t
and cplus_primitive_type_char32_t.
* dwarf2read.c (read_base_type) <DW_ATE_UTF>: If bit size is 16 or
32, use the archtecture's built-in type for char16_t and char32_t,
respectively. Otherwise, fallback to init_integer_type as before,
but make the type unsigned, and issue a complaint.
* gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* gdb.cp/wide_char_types.c: New file.
* gdb.cp/wide_char_types.exp: New file.
2017-04-12 15:00:49 +02:00
|
|
|
# a program. Lang can be "c", "c++03" or "c++11". In C++11,
|
|
|
|
# char16_t/char32_t are built-in types, and the debug information
|
|
|
|
# reflects that (see
|
|
|
|
# http://wiki.dwarfstd.org/index.php?title=C%2B%2B0x:_New_string_literals).
|
|
|
|
|
|
|
|
proc wide_char_types_program {lang} {
|
|
|
|
global srcfile testfile
|
|
|
|
|
|
|
|
set options {debug}
|
|
|
|
if {$lang == "c++03"} {
|
|
|
|
lappend options c++ additional_flags=-std=c++03
|
|
|
|
set out $testfile-cxx03
|
|
|
|
} elseif {$lang == "c++11"} {
|
|
|
|
lappend options c++ additional_flags=-std=c++11
|
|
|
|
set out $testfile-cxx11
|
|
|
|
} else {
|
|
|
|
set out $testfile-c
|
|
|
|
}
|
|
|
|
|
|
|
|
if { [prepare_for_testing "failed to prepare" \
|
|
|
|
${out} [list $srcfile] $options] } {
|
|
|
|
return -1
|
|
|
|
}
|
|
|
|
|
|
|
|
if ![runto_main] then {
|
|
|
|
fail "can't run to main"
|
|
|
|
return 0
|
|
|
|
}
|
Teach GDB that wchar_t is a built-in type in C++ mode
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
2017-04-12 15:00:49 +02:00
|
|
|
do_test_wide_char $lang "u16" "u32" "wchar"
|
Fix PR c++/21323: GDB thinks char16_t and char32_t are signed in C++
While the C++ standard says that char16_t and char32_t are unsigned types:
Types char16_t and char32_t denote distinct types with the same size,
signedness, and alignment as uint_least16_t and uint_least32_t,
respectively, in <cstdint>, called the underlying types.
... gdb treats them as signed currently:
(gdb) p (char16_t)-1
$1 = -1 u'\xffff'
There are actually two places in gdb that hardcode these types:
- gdbtypes.c:gdbtypes_post_init, when creating the built-in types,
seemingly used by the "x /s" command (judging from commit 9a22f0d0).
- dwarf2read.c, when reading base types with DW_ATE_UTF encoding
(which is what is used for these types, when compiling for C++11 and
up). Despite the comment, the type created does end up used.
Both places need fixing. But since I couldn't tell why dwarf2read.c
needs to create a new type, I've made it use the per-arch built-in
types instead, so that the types are only created once per arch
instead of once per objfile. That seems to work fine.
While writting the test, I noticed that the C++ language parser isn't
actually aware of these built-in types, so if you try to use them
without a program that uses them, you get:
(gdb) set language c++
(gdb) ptype char16_t
No symbol table is loaded. Use the "file" command.
(gdb) ptype u"hello"
No type named char16_t.
(gdb) p u"hello"
No type named char16_t.
That's fixed by simply adding a couple entries to C++'s built-in types
array in c-lang.c. With that, we get the expected:
(gdb) ptype char16_t
type = char16_t
(gdb) ptype u"hello"
type = char16_t [6]
(gdb) p u"hello"
$1 = u"hello"
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_char16_t,
cplus_primitive_type_char32_t>: New enum values.
(cplus_language_arch_info): Register cplus_primitive_type_char16_t
and cplus_primitive_type_char32_t.
* dwarf2read.c (read_base_type) <DW_ATE_UTF>: If bit size is 16 or
32, use the archtecture's built-in type for char16_t and char32_t,
respectively. Otherwise, fallback to init_integer_type as before,
but make the type unsigned, and issue a complaint.
* gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* gdb.cp/wide_char_types.c: New file.
* gdb.cp/wide_char_types.exp: New file.
2017-04-12 15:00:49 +02:00
|
|
|
}
|
|
|
|
|
Teach GDB that wchar_t is a built-in type in C++ mode
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
2017-04-12 15:00:49 +02:00
|
|
|
# Test char16_t/char32_t/wchar_t in language LANG. Use CHAR16_EXP,
|
|
|
|
# CHAR32_EXP, and WCHAR_EXP as expression for each of the
|
|
|
|
# corresponding types. (E.g., CHAR16_EXP will be u16 when testing
|
|
|
|
# against the program, and "(char16_t)-1" when testing the built-in
|
|
|
|
# types without a program loaded.)
|
Fix PR c++/21323: GDB thinks char16_t and char32_t are signed in C++
While the C++ standard says that char16_t and char32_t are unsigned types:
Types char16_t and char32_t denote distinct types with the same size,
signedness, and alignment as uint_least16_t and uint_least32_t,
respectively, in <cstdint>, called the underlying types.
... gdb treats them as signed currently:
(gdb) p (char16_t)-1
$1 = -1 u'\xffff'
There are actually two places in gdb that hardcode these types:
- gdbtypes.c:gdbtypes_post_init, when creating the built-in types,
seemingly used by the "x /s" command (judging from commit 9a22f0d0).
- dwarf2read.c, when reading base types with DW_ATE_UTF encoding
(which is what is used for these types, when compiling for C++11 and
up). Despite the comment, the type created does end up used.
Both places need fixing. But since I couldn't tell why dwarf2read.c
needs to create a new type, I've made it use the per-arch built-in
types instead, so that the types are only created once per arch
instead of once per objfile. That seems to work fine.
While writting the test, I noticed that the C++ language parser isn't
actually aware of these built-in types, so if you try to use them
without a program that uses them, you get:
(gdb) set language c++
(gdb) ptype char16_t
No symbol table is loaded. Use the "file" command.
(gdb) ptype u"hello"
No type named char16_t.
(gdb) p u"hello"
No type named char16_t.
That's fixed by simply adding a couple entries to C++'s built-in types
array in c-lang.c. With that, we get the expected:
(gdb) ptype char16_t
type = char16_t
(gdb) ptype u"hello"
type = char16_t [6]
(gdb) p u"hello"
$1 = u"hello"
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_char16_t,
cplus_primitive_type_char32_t>: New enum values.
(cplus_language_arch_info): Register cplus_primitive_type_char16_t
and cplus_primitive_type_char32_t.
* dwarf2read.c (read_base_type) <DW_ATE_UTF>: If bit size is 16 or
32, use the archtecture's built-in type for char16_t and char32_t,
respectively. Otherwise, fallback to init_integer_type as before,
but make the type unsigned, and issue a complaint.
* gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* gdb.cp/wide_char_types.c: New file.
* gdb.cp/wide_char_types.exp: New file.
2017-04-12 15:00:49 +02:00
|
|
|
|
Teach GDB that wchar_t is a built-in type in C++ mode
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
2017-04-12 15:00:49 +02:00
|
|
|
proc do_test_wide_char {lang char16_exp char32_exp wchar_exp} {
|
Fix PR c++/21323: GDB thinks char16_t and char32_t are signed in C++
While the C++ standard says that char16_t and char32_t are unsigned types:
Types char16_t and char32_t denote distinct types with the same size,
signedness, and alignment as uint_least16_t and uint_least32_t,
respectively, in <cstdint>, called the underlying types.
... gdb treats them as signed currently:
(gdb) p (char16_t)-1
$1 = -1 u'\xffff'
There are actually two places in gdb that hardcode these types:
- gdbtypes.c:gdbtypes_post_init, when creating the built-in types,
seemingly used by the "x /s" command (judging from commit 9a22f0d0).
- dwarf2read.c, when reading base types with DW_ATE_UTF encoding
(which is what is used for these types, when compiling for C++11 and
up). Despite the comment, the type created does end up used.
Both places need fixing. But since I couldn't tell why dwarf2read.c
needs to create a new type, I've made it use the per-arch built-in
types instead, so that the types are only created once per arch
instead of once per objfile. That seems to work fine.
While writting the test, I noticed that the C++ language parser isn't
actually aware of these built-in types, so if you try to use them
without a program that uses them, you get:
(gdb) set language c++
(gdb) ptype char16_t
No symbol table is loaded. Use the "file" command.
(gdb) ptype u"hello"
No type named char16_t.
(gdb) p u"hello"
No type named char16_t.
That's fixed by simply adding a couple entries to C++'s built-in types
array in c-lang.c. With that, we get the expected:
(gdb) ptype char16_t
type = char16_t
(gdb) ptype u"hello"
type = char16_t [6]
(gdb) p u"hello"
$1 = u"hello"
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_char16_t,
cplus_primitive_type_char32_t>: New enum values.
(cplus_language_arch_info): Register cplus_primitive_type_char16_t
and cplus_primitive_type_char32_t.
* dwarf2read.c (read_base_type) <DW_ATE_UTF>: If bit size is 16 or
32, use the archtecture's built-in type for char16_t and char32_t,
respectively. Otherwise, fallback to init_integer_type as before,
but make the type unsigned, and issue a complaint.
* gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* gdb.cp/wide_char_types.c: New file.
* gdb.cp/wide_char_types.exp: New file.
2017-04-12 15:00:49 +02:00
|
|
|
global gdb_prompt
|
|
|
|
|
|
|
|
# Check that the fixed-width wide types are distinct built-in
|
|
|
|
# types in C++11+. In other modes, they're instead typedefs,
|
|
|
|
# found in the debug info.
|
|
|
|
if {$lang == "c++11"} {
|
|
|
|
gdb_test "ptype $char16_exp" "type = char16_t" \
|
|
|
|
"char16_t is distinct"
|
|
|
|
gdb_test "ptype $char32_exp" "type = char32_t" \
|
|
|
|
"char32_t is distinct"
|
|
|
|
} else {
|
|
|
|
gdb_test "ptype $char16_exp" "type = unsigned (long|int|short)" \
|
|
|
|
"char16_t is typedef"
|
|
|
|
gdb_test "ptype $char32_exp" "type = unsigned (long|int|short)" \
|
|
|
|
"char32_t is typedef"
|
|
|
|
}
|
|
|
|
|
Teach GDB that wchar_t is a built-in type in C++ mode
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
2017-04-12 15:00:49 +02:00
|
|
|
# wchar_t is a disctinct built-in type in C++03+.
|
|
|
|
if {$lang != "c"} {
|
|
|
|
gdb_test "ptype $wchar_exp" "type = wchar_t" \
|
|
|
|
"wchar_t is distinct"
|
|
|
|
} else {
|
|
|
|
gdb_test "ptype $wchar_exp" "type = (unsigned )?(long|int|short)" \
|
|
|
|
"wchar_t is typedef"
|
|
|
|
}
|
|
|
|
|
Fix PR c++/21323: GDB thinks char16_t and char32_t are signed in C++
While the C++ standard says that char16_t and char32_t are unsigned types:
Types char16_t and char32_t denote distinct types with the same size,
signedness, and alignment as uint_least16_t and uint_least32_t,
respectively, in <cstdint>, called the underlying types.
... gdb treats them as signed currently:
(gdb) p (char16_t)-1
$1 = -1 u'\xffff'
There are actually two places in gdb that hardcode these types:
- gdbtypes.c:gdbtypes_post_init, when creating the built-in types,
seemingly used by the "x /s" command (judging from commit 9a22f0d0).
- dwarf2read.c, when reading base types with DW_ATE_UTF encoding
(which is what is used for these types, when compiling for C++11 and
up). Despite the comment, the type created does end up used.
Both places need fixing. But since I couldn't tell why dwarf2read.c
needs to create a new type, I've made it use the per-arch built-in
types instead, so that the types are only created once per arch
instead of once per objfile. That seems to work fine.
While writting the test, I noticed that the C++ language parser isn't
actually aware of these built-in types, so if you try to use them
without a program that uses them, you get:
(gdb) set language c++
(gdb) ptype char16_t
No symbol table is loaded. Use the "file" command.
(gdb) ptype u"hello"
No type named char16_t.
(gdb) p u"hello"
No type named char16_t.
That's fixed by simply adding a couple entries to C++'s built-in types
array in c-lang.c. With that, we get the expected:
(gdb) ptype char16_t
type = char16_t
(gdb) ptype u"hello"
type = char16_t [6]
(gdb) p u"hello"
$1 = u"hello"
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_char16_t,
cplus_primitive_type_char32_t>: New enum values.
(cplus_language_arch_info): Register cplus_primitive_type_char16_t
and cplus_primitive_type_char32_t.
* dwarf2read.c (read_base_type) <DW_ATE_UTF>: If bit size is 16 or
32, use the archtecture's built-in type for char16_t and char32_t,
respectively. Otherwise, fallback to init_integer_type as before,
but make the type unsigned, and issue a complaint.
* gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* gdb.cp/wide_char_types.c: New file.
* gdb.cp/wide_char_types.exp: New file.
2017-04-12 15:00:49 +02:00
|
|
|
# Check that the fixed-width wide char types are unsigned.
|
|
|
|
gdb_test "p $char16_exp" " = 65535 u'\\\\xffff'" \
|
|
|
|
"char16_t is unsigned"
|
|
|
|
gdb_test "p $char32_exp" " = 4294967295 U'\\\\xffffffff'" \
|
|
|
|
"char32_t is unsigned"
|
|
|
|
|
Teach GDB that wchar_t is a built-in type in C++ mode
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
2017-04-12 15:00:49 +02:00
|
|
|
# Whether wchar_t is signed is implementation-dependent. While we
|
|
|
|
# ignore whether GDB got the ABI size/sign details right here,
|
|
|
|
# this at least verifies that the value isn't garbage, and that
|
|
|
|
# GDB correctly outputs the character using the "L" prefix.
|
|
|
|
set test "wchar_t sign"
|
|
|
|
gdb_test_multiple "p $wchar_exp" $test {
|
|
|
|
-re " = 4294967295 L'\\\\xffffffff'\r\n$gdb_prompt $" {
|
|
|
|
pass "$test (unsigned)"
|
|
|
|
}
|
|
|
|
-re " = 65535 L'\\\\xffff'\r\n$gdb_prompt $" {
|
|
|
|
pass "$test (unsigned)"
|
|
|
|
}
|
|
|
|
-re " = -1 L'\\\\xffffffff'\r\n$gdb_prompt $" {
|
|
|
|
pass "$test (signed)"
|
|
|
|
}
|
|
|
|
-re " = -1 L'\\\\xffff'\r\n$gdb_prompt $" {
|
|
|
|
pass "$test (signed)"
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Fix PR c++/21323: GDB thinks char16_t and char32_t are signed in C++
While the C++ standard says that char16_t and char32_t are unsigned types:
Types char16_t and char32_t denote distinct types with the same size,
signedness, and alignment as uint_least16_t and uint_least32_t,
respectively, in <cstdint>, called the underlying types.
... gdb treats them as signed currently:
(gdb) p (char16_t)-1
$1 = -1 u'\xffff'
There are actually two places in gdb that hardcode these types:
- gdbtypes.c:gdbtypes_post_init, when creating the built-in types,
seemingly used by the "x /s" command (judging from commit 9a22f0d0).
- dwarf2read.c, when reading base types with DW_ATE_UTF encoding
(which is what is used for these types, when compiling for C++11 and
up). Despite the comment, the type created does end up used.
Both places need fixing. But since I couldn't tell why dwarf2read.c
needs to create a new type, I've made it use the per-arch built-in
types instead, so that the types are only created once per arch
instead of once per objfile. That seems to work fine.
While writting the test, I noticed that the C++ language parser isn't
actually aware of these built-in types, so if you try to use them
without a program that uses them, you get:
(gdb) set language c++
(gdb) ptype char16_t
No symbol table is loaded. Use the "file" command.
(gdb) ptype u"hello"
No type named char16_t.
(gdb) p u"hello"
No type named char16_t.
That's fixed by simply adding a couple entries to C++'s built-in types
array in c-lang.c. With that, we get the expected:
(gdb) ptype char16_t
type = char16_t
(gdb) ptype u"hello"
type = char16_t [6]
(gdb) p u"hello"
$1 = u"hello"
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_char16_t,
cplus_primitive_type_char32_t>: New enum values.
(cplus_language_arch_info): Register cplus_primitive_type_char16_t
and cplus_primitive_type_char32_t.
* dwarf2read.c (read_base_type) <DW_ATE_UTF>: If bit size is 16 or
32, use the archtecture's built-in type for char16_t and char32_t,
respectively. Otherwise, fallback to init_integer_type as before,
but make the type unsigned, and issue a complaint.
* gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* gdb.cp/wide_char_types.c: New file.
* gdb.cp/wide_char_types.exp: New file.
2017-04-12 15:00:49 +02:00
|
|
|
# Check sizeof. These are fixed-width.
|
|
|
|
gdb_test "p sizeof($char16_exp)" "= 2" \
|
|
|
|
"sizeof($char16_exp) == 2"
|
|
|
|
gdb_test "p sizeof($char32_exp)" "= 4" \
|
|
|
|
"sizeof(char16_t) == 4"
|
|
|
|
|
Teach GDB that wchar_t is a built-in type in C++ mode
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
2017-04-12 15:00:49 +02:00
|
|
|
# Size of wchar_t depends on ABI.
|
|
|
|
gdb_test "p sizeof($wchar_exp)" "= (2|4)" \
|
|
|
|
"sizeof(wchar_t)"
|
|
|
|
|
Fix PR c++/21323: GDB thinks char16_t and char32_t are signed in C++
While the C++ standard says that char16_t and char32_t are unsigned types:
Types char16_t and char32_t denote distinct types with the same size,
signedness, and alignment as uint_least16_t and uint_least32_t,
respectively, in <cstdint>, called the underlying types.
... gdb treats them as signed currently:
(gdb) p (char16_t)-1
$1 = -1 u'\xffff'
There are actually two places in gdb that hardcode these types:
- gdbtypes.c:gdbtypes_post_init, when creating the built-in types,
seemingly used by the "x /s" command (judging from commit 9a22f0d0).
- dwarf2read.c, when reading base types with DW_ATE_UTF encoding
(which is what is used for these types, when compiling for C++11 and
up). Despite the comment, the type created does end up used.
Both places need fixing. But since I couldn't tell why dwarf2read.c
needs to create a new type, I've made it use the per-arch built-in
types instead, so that the types are only created once per arch
instead of once per objfile. That seems to work fine.
While writting the test, I noticed that the C++ language parser isn't
actually aware of these built-in types, so if you try to use them
without a program that uses them, you get:
(gdb) set language c++
(gdb) ptype char16_t
No symbol table is loaded. Use the "file" command.
(gdb) ptype u"hello"
No type named char16_t.
(gdb) p u"hello"
No type named char16_t.
That's fixed by simply adding a couple entries to C++'s built-in types
array in c-lang.c. With that, we get the expected:
(gdb) ptype char16_t
type = char16_t
(gdb) ptype u"hello"
type = char16_t [6]
(gdb) p u"hello"
$1 = u"hello"
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_char16_t,
cplus_primitive_type_char32_t>: New enum values.
(cplus_language_arch_info): Register cplus_primitive_type_char16_t
and cplus_primitive_type_char32_t.
* dwarf2read.c (read_base_type) <DW_ATE_UTF>: If bit size is 16 or
32, use the archtecture's built-in type for char16_t and char32_t,
respectively. Otherwise, fallback to init_integer_type as before,
but make the type unsigned, and issue a complaint.
* gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* gdb.cp/wide_char_types.c: New file.
* gdb.cp/wide_char_types.exp: New file.
2017-04-12 15:00:49 +02:00
|
|
|
# Test printing wide literal strings. Note that when testing with
|
|
|
|
# no program started, this relies on GDB's awareness of the
|
|
|
|
# built-in wide char types.
|
|
|
|
gdb_test {p U"hello"} {= U"hello"}
|
|
|
|
gdb_test {p u"hello"} {= u"hello"}
|
Teach GDB that wchar_t is a built-in type in C++ mode
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
2017-04-12 15:00:49 +02:00
|
|
|
gdb_test {p L"hello"} {= L"hello"}
|
Fix PR c++/21323: GDB thinks char16_t and char32_t are signed in C++
While the C++ standard says that char16_t and char32_t are unsigned types:
Types char16_t and char32_t denote distinct types with the same size,
signedness, and alignment as uint_least16_t and uint_least32_t,
respectively, in <cstdint>, called the underlying types.
... gdb treats them as signed currently:
(gdb) p (char16_t)-1
$1 = -1 u'\xffff'
There are actually two places in gdb that hardcode these types:
- gdbtypes.c:gdbtypes_post_init, when creating the built-in types,
seemingly used by the "x /s" command (judging from commit 9a22f0d0).
- dwarf2read.c, when reading base types with DW_ATE_UTF encoding
(which is what is used for these types, when compiling for C++11 and
up). Despite the comment, the type created does end up used.
Both places need fixing. But since I couldn't tell why dwarf2read.c
needs to create a new type, I've made it use the per-arch built-in
types instead, so that the types are only created once per arch
instead of once per objfile. That seems to work fine.
While writting the test, I noticed that the C++ language parser isn't
actually aware of these built-in types, so if you try to use them
without a program that uses them, you get:
(gdb) set language c++
(gdb) ptype char16_t
No symbol table is loaded. Use the "file" command.
(gdb) ptype u"hello"
No type named char16_t.
(gdb) p u"hello"
No type named char16_t.
That's fixed by simply adding a couple entries to C++'s built-in types
array in c-lang.c. With that, we get the expected:
(gdb) ptype char16_t
type = char16_t
(gdb) ptype u"hello"
type = char16_t [6]
(gdb) p u"hello"
$1 = u"hello"
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_char16_t,
cplus_primitive_type_char32_t>: New enum values.
(cplus_language_arch_info): Register cplus_primitive_type_char16_t
and cplus_primitive_type_char32_t.
* dwarf2read.c (read_base_type) <DW_ATE_UTF>: If bit size is 16 or
32, use the archtecture's built-in type for char16_t and char32_t,
respectively. Otherwise, fallback to init_integer_type as before,
but make the type unsigned, and issue a complaint.
* gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* gdb.cp/wide_char_types.c: New file.
* gdb.cp/wide_char_types.exp: New file.
2017-04-12 15:00:49 +02:00
|
|
|
}
|
|
|
|
|
Teach GDB that wchar_t is a built-in type in C++ mode
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
2017-04-12 15:00:49 +02:00
|
|
|
# Make sure that the char16_t/char32_t/wchar_t types are recognized as
|
Fix PR c++/21323: GDB thinks char16_t and char32_t are signed in C++
While the C++ standard says that char16_t and char32_t are unsigned types:
Types char16_t and char32_t denote distinct types with the same size,
signedness, and alignment as uint_least16_t and uint_least32_t,
respectively, in <cstdint>, called the underlying types.
... gdb treats them as signed currently:
(gdb) p (char16_t)-1
$1 = -1 u'\xffff'
There are actually two places in gdb that hardcode these types:
- gdbtypes.c:gdbtypes_post_init, when creating the built-in types,
seemingly used by the "x /s" command (judging from commit 9a22f0d0).
- dwarf2read.c, when reading base types with DW_ATE_UTF encoding
(which is what is used for these types, when compiling for C++11 and
up). Despite the comment, the type created does end up used.
Both places need fixing. But since I couldn't tell why dwarf2read.c
needs to create a new type, I've made it use the per-arch built-in
types instead, so that the types are only created once per arch
instead of once per objfile. That seems to work fine.
While writting the test, I noticed that the C++ language parser isn't
actually aware of these built-in types, so if you try to use them
without a program that uses them, you get:
(gdb) set language c++
(gdb) ptype char16_t
No symbol table is loaded. Use the "file" command.
(gdb) ptype u"hello"
No type named char16_t.
(gdb) p u"hello"
No type named char16_t.
That's fixed by simply adding a couple entries to C++'s built-in types
array in c-lang.c. With that, we get the expected:
(gdb) ptype char16_t
type = char16_t
(gdb) ptype u"hello"
type = char16_t [6]
(gdb) p u"hello"
$1 = u"hello"
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_char16_t,
cplus_primitive_type_char32_t>: New enum values.
(cplus_language_arch_info): Register cplus_primitive_type_char16_t
and cplus_primitive_type_char32_t.
* dwarf2read.c (read_base_type) <DW_ATE_UTF>: If bit size is 16 or
32, use the archtecture's built-in type for char16_t and char32_t,
respectively. Otherwise, fallback to init_integer_type as before,
but make the type unsigned, and issue a complaint.
* gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* gdb.cp/wide_char_types.c: New file.
* gdb.cp/wide_char_types.exp: New file.
2017-04-12 15:00:49 +02:00
|
|
|
# distinct built-in types in C++ mode, even with no program loaded.
|
|
|
|
# Check that in C mode, the types are not recognized.
|
|
|
|
|
|
|
|
proc wide_char_types_no_program {} {
|
|
|
|
global srcfile testfile
|
|
|
|
|
|
|
|
gdb_exit
|
|
|
|
gdb_start
|
|
|
|
|
|
|
|
# These types are not built-in in C.
|
|
|
|
with_test_prefix "c" {
|
|
|
|
gdb_test "set language c"
|
|
|
|
|
|
|
|
gdb_test "p (char16_t) -1" "No symbol table is loaded.*" \
|
|
|
|
"char16_t is not built-in"
|
|
|
|
gdb_test "p (char32_t) -1" "No symbol table is loaded.*" \
|
|
|
|
"char32_t is not built-in"
|
|
|
|
|
Teach GDB that wchar_t is a built-in type in C++ mode
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
2017-04-12 15:00:49 +02:00
|
|
|
gdb_test "p (wchar_t) -1" "No symbol table is loaded.*" \
|
|
|
|
"wchar_t is not built-in"
|
|
|
|
|
Fix PR c++/21323: GDB thinks char16_t and char32_t are signed in C++
While the C++ standard says that char16_t and char32_t are unsigned types:
Types char16_t and char32_t denote distinct types with the same size,
signedness, and alignment as uint_least16_t and uint_least32_t,
respectively, in <cstdint>, called the underlying types.
... gdb treats them as signed currently:
(gdb) p (char16_t)-1
$1 = -1 u'\xffff'
There are actually two places in gdb that hardcode these types:
- gdbtypes.c:gdbtypes_post_init, when creating the built-in types,
seemingly used by the "x /s" command (judging from commit 9a22f0d0).
- dwarf2read.c, when reading base types with DW_ATE_UTF encoding
(which is what is used for these types, when compiling for C++11 and
up). Despite the comment, the type created does end up used.
Both places need fixing. But since I couldn't tell why dwarf2read.c
needs to create a new type, I've made it use the per-arch built-in
types instead, so that the types are only created once per arch
instead of once per objfile. That seems to work fine.
While writting the test, I noticed that the C++ language parser isn't
actually aware of these built-in types, so if you try to use them
without a program that uses them, you get:
(gdb) set language c++
(gdb) ptype char16_t
No symbol table is loaded. Use the "file" command.
(gdb) ptype u"hello"
No type named char16_t.
(gdb) p u"hello"
No type named char16_t.
That's fixed by simply adding a couple entries to C++'s built-in types
array in c-lang.c. With that, we get the expected:
(gdb) ptype char16_t
type = char16_t
(gdb) ptype u"hello"
type = char16_t [6]
(gdb) p u"hello"
$1 = u"hello"
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_char16_t,
cplus_primitive_type_char32_t>: New enum values.
(cplus_language_arch_info): Register cplus_primitive_type_char16_t
and cplus_primitive_type_char32_t.
* dwarf2read.c (read_base_type) <DW_ATE_UTF>: If bit size is 16 or
32, use the archtecture's built-in type for char16_t and char32_t,
respectively. Otherwise, fallback to init_integer_type as before,
but make the type unsigned, and issue a complaint.
* gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* gdb.cp/wide_char_types.c: New file.
* gdb.cp/wide_char_types.exp: New file.
2017-04-12 15:00:49 +02:00
|
|
|
gdb_test {p U"hello"} "No type named char32_t\\\."
|
|
|
|
gdb_test {p u"hello"} "No type named char16_t\\\."
|
Teach GDB that wchar_t is a built-in type in C++ mode
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
2017-04-12 15:00:49 +02:00
|
|
|
gdb_test {p L"hello"} "No type named wchar_t\\\."
|
Fix PR c++/21323: GDB thinks char16_t and char32_t are signed in C++
While the C++ standard says that char16_t and char32_t are unsigned types:
Types char16_t and char32_t denote distinct types with the same size,
signedness, and alignment as uint_least16_t and uint_least32_t,
respectively, in <cstdint>, called the underlying types.
... gdb treats them as signed currently:
(gdb) p (char16_t)-1
$1 = -1 u'\xffff'
There are actually two places in gdb that hardcode these types:
- gdbtypes.c:gdbtypes_post_init, when creating the built-in types,
seemingly used by the "x /s" command (judging from commit 9a22f0d0).
- dwarf2read.c, when reading base types with DW_ATE_UTF encoding
(which is what is used for these types, when compiling for C++11 and
up). Despite the comment, the type created does end up used.
Both places need fixing. But since I couldn't tell why dwarf2read.c
needs to create a new type, I've made it use the per-arch built-in
types instead, so that the types are only created once per arch
instead of once per objfile. That seems to work fine.
While writting the test, I noticed that the C++ language parser isn't
actually aware of these built-in types, so if you try to use them
without a program that uses them, you get:
(gdb) set language c++
(gdb) ptype char16_t
No symbol table is loaded. Use the "file" command.
(gdb) ptype u"hello"
No type named char16_t.
(gdb) p u"hello"
No type named char16_t.
That's fixed by simply adding a couple entries to C++'s built-in types
array in c-lang.c. With that, we get the expected:
(gdb) ptype char16_t
type = char16_t
(gdb) ptype u"hello"
type = char16_t [6]
(gdb) p u"hello"
$1 = u"hello"
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_char16_t,
cplus_primitive_type_char32_t>: New enum values.
(cplus_language_arch_info): Register cplus_primitive_type_char16_t
and cplus_primitive_type_char32_t.
* dwarf2read.c (read_base_type) <DW_ATE_UTF>: If bit size is 16 or
32, use the archtecture's built-in type for char16_t and char32_t,
respectively. Otherwise, fallback to init_integer_type as before,
but make the type unsigned, and issue a complaint.
* gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* gdb.cp/wide_char_types.c: New file.
* gdb.cp/wide_char_types.exp: New file.
2017-04-12 15:00:49 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
# Note GDB does not distinguish C++ dialects, so the fixed-width
|
|
|
|
# types are always available in C++ mode, even if they were not
|
|
|
|
# built-in types before C++11.
|
|
|
|
with_test_prefix "c++" {
|
|
|
|
gdb_test "set language c++"
|
|
|
|
|
Teach GDB that wchar_t is a built-in type in C++ mode
GDB is currently not aware that wchar_t is a built-in type in C++
mode. This is usually not a problem because the debug info describes
the type, so when you have a program loaded, you don't notice this.
However, if you try expressions involving wchar_t before a program is
loaded, gdb errors out:
(gdb) p (wchar_t)-1
No symbol table is loaded. Use the "file" command.
(gdb) p L"hello"
No type named wchar_t.
(gdb) ptype L"hello"
No type named wchar_t.
This commit teaches gdb about the type. After:
(gdb) p (wchar_t)-1
$1 = -1 L'\xffffffff'
(gdb) p L"hello"
$2 = L"hello"
(gdb) ptype L"hello"
type = wchar_t [6]
Unlike char16_t/char32_t, unfortunately, the underlying type of
wchar_t is implementation dependent, both size and signness. So this
requires adding a couple new gdbarch hooks.
I grepped the GCC code base for WCHAR_TYPE and WCHAR_TYPE_SIZE, and it
seems to me that the majority of the ABIs have a 4-byte signed
wchar_t, so that's what I made the default for GDB too. And then I
looked for which ports have a 16-bit and/or unsigned wchar_t, and made
GDB follow suit.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_wchar_t>:
New enum value.
(cplus_language_arch_info): Register cplus_primitive_type_wchar_t.
* gdbtypes.h (struct builtin_type) <builtin_wchar>: New field.
* gdbtypes.c (gdbtypes_post_init): Create the "wchar_t" type.
* gdbarch.sh (wchar_bit, wchar_signed): New per-arch values.
* gdbarch.h, gdbarch.c: Regenerate.
* aarch64-tdep.c (aarch64_gdbarch_init): Override
gdbarch_wchar_bit and gdbarch_wchar_signed.
* alpha-tdep.c (alpha_gdbarch_init): Likewise.
* arm-tdep.c (arm_gdbarch_init): Likewise.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* h8300-tdep.c (h8300_gdbarch_init): Likewise.
* i386-nto-tdep.c (i386nto_init_abi): Likewise.
* i386-tdep.c (i386_go32_init_abi): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-aix-tdep.c (rs6000_aix_init_osabi): Likewise.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* sparc64-tdep.c (sparc64_init_abi): Likewise.
* windows-tdep.c (windows_init_abi): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR gdb/21323
* gdb.cp/wide_char_types.c: Include <wchar.h>.
(wchar): New global.
* gdb.cp/wide_char_types.exp (wide_char_types_program)
(do_test_wide_char, wide_char_types_no_program, top level): Add
wchar_t testing.
2017-04-12 15:00:49 +02:00
|
|
|
do_test_wide_char "c++11" "(char16_t) -1" "(char32_t) -1" "(wchar_t) -1"
|
Fix PR c++/21323: GDB thinks char16_t and char32_t are signed in C++
While the C++ standard says that char16_t and char32_t are unsigned types:
Types char16_t and char32_t denote distinct types with the same size,
signedness, and alignment as uint_least16_t and uint_least32_t,
respectively, in <cstdint>, called the underlying types.
... gdb treats them as signed currently:
(gdb) p (char16_t)-1
$1 = -1 u'\xffff'
There are actually two places in gdb that hardcode these types:
- gdbtypes.c:gdbtypes_post_init, when creating the built-in types,
seemingly used by the "x /s" command (judging from commit 9a22f0d0).
- dwarf2read.c, when reading base types with DW_ATE_UTF encoding
(which is what is used for these types, when compiling for C++11 and
up). Despite the comment, the type created does end up used.
Both places need fixing. But since I couldn't tell why dwarf2read.c
needs to create a new type, I've made it use the per-arch built-in
types instead, so that the types are only created once per arch
instead of once per objfile. That seems to work fine.
While writting the test, I noticed that the C++ language parser isn't
actually aware of these built-in types, so if you try to use them
without a program that uses them, you get:
(gdb) set language c++
(gdb) ptype char16_t
No symbol table is loaded. Use the "file" command.
(gdb) ptype u"hello"
No type named char16_t.
(gdb) p u"hello"
No type named char16_t.
That's fixed by simply adding a couple entries to C++'s built-in types
array in c-lang.c. With that, we get the expected:
(gdb) ptype char16_t
type = char16_t
(gdb) ptype u"hello"
type = char16_t [6]
(gdb) p u"hello"
$1 = u"hello"
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* c-lang.c (cplus_primitive_types) <cplus_primitive_type_char16_t,
cplus_primitive_type_char32_t>: New enum values.
(cplus_language_arch_info): Register cplus_primitive_type_char16_t
and cplus_primitive_type_char32_t.
* dwarf2read.c (read_base_type) <DW_ATE_UTF>: If bit size is 16 or
32, use the archtecture's built-in type for char16_t and char32_t,
respectively. Otherwise, fallback to init_integer_type as before,
but make the type unsigned, and issue a complaint.
* gdbtypes.c (gdbtypes_post_init): Make char16_t and char32_t unsigned.
gdb/testsuite/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
PR c++/21323
* gdb.cp/wide_char_types.c: New file.
* gdb.cp/wide_char_types.exp: New file.
2017-04-12 15:00:49 +02:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
# Check wide char types with no program loaded.
|
|
|
|
with_test_prefix "no program" {
|
|
|
|
wide_char_types_no_program
|
|
|
|
}
|
|
|
|
|
|
|
|
# Check types when a program is loaded.
|
|
|
|
with_test_prefix "with program" {
|
|
|
|
foreach_with_prefix lang {"c" "c++03" "c++11"} {
|
|
|
|
wide_char_types_program $lang
|
|
|
|
}
|
|
|
|
}
|