OpenE2K
/
binutils-gdb
12
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
binutils-gdb/gas/ChangeLog-9295

13125 lines
500 KiB
Plaintext
Raw Normal View History

19990502 sourceware import
1999-05-03 09:29:11 +02:00
Sat Dec 30 23:42:51 1995 Jeffrey A Law (law@cygnus.com)
* ecoff.c (ecoff_stab): Simplify. Correctly handle sym + offset
addresses for static variables.
Thu Dec 21 12:54:32 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-ppc.c (mapping): Make @got give a real GOT relocation,
and xgot give the old toc16 relocation.
(md_apply_fix3): Support all GOT relocations.
Wed Dec 20 14:57:17 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (load_address): Correctly handle a constant in
SVR4_PIC case. From Richard Kenner <kenner@vlsi1.ultra.nyu.edu>.
Fri Dec 15 14:25:07 1995 J.T. Conklin <jtc@rtl.cygnus.com>
* config/tc-sh.c (parse_reg): Recognize SH3 registers.
(get_specific): Handle A_SSR, A_SPC and A_REG_B.
(build_Mbytes): Handle REG_B.
Fri Dec 15 16:07:25 1995 Ian Lance Taylor <ian@cygnus.com>
* ecoff.c (ecoff_build_aux): Use new bfd_big_endian macro.
Fri Dec 15 12:11:48 1995 Raymond Jou <rjou@mexican.cygnus.com>
* mpw-make.sed: If linking, edit ALL_CFLAGS to CFLAGS.
Thu Dec 14 15:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
* config/obj-coff.c (write_object_file): Set the s_align field to
the number of bytes, rather than to the power of 2.
Tue Dec 12 12:19:37 1995 Ian Lance Taylor <ian@cygnus.com>
* Makefile.in (DISTCLEAN_HERE): New variable.
(distclean): Use it.
(maintainer-clean): Depend upon clean-here rather than clean,
distclean, and clean-info. Run make maintainer-clean in doc.
Remove files listed in DISTCLEAN_HERE.
* doc/Makefile.in (maintainer-clean realclean): Split out from
distclean. Depend upon clean-info and distclean.
Mon Dec 11 16:23:51 1995 Stan Shebs <shebs@andros.cygnus.com>
* mac-as.r: Fix copyright and version strings.
(cfrg): Use PROG_NAME instead of literal name.
Mon Dec 11 14:14:08 1995 Ian Lance Taylor <ian@cygnus.com>
* read.c (read_a_source_file): If tc_unrecognized_line is defined,
call it.
* config/tc-a29k.h (tc_unrecognized_line): Define.
* config/tc-a29k.c (a29k_unrecognized_line): New function.
(md_operand): Handle a29k style local dollar labels.
Wed Dec 6 17:52:52 1995 Ian Lance Taylor <ian@cygnus.com>
* config/obj-multi.h: If OBJ_MAYBE_ELF, define OBJ_SYMFIELD_TYPE.
Tue Dec 5 13:26:34 1995 Ken Raeburn <raeburn@cygnus.com>
* read.c (s_fill): If md_flush_pending_output is defined, call
it.
Mon Dec 4 15:10:53 1995 Ken Raeburn <raeburn@cygnus.com>
* config/obj-coff.c (size_section, fill_section, fixup_mdeps):
Treat rs_align_code like rs_align.
Sun Dec 3 16:46:54 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
* config/tc-arm.c (cp_address_required_here): Set pre_inc when
converting an absolute address into a PC-relative one.
Fri Dec 1 11:57:56 1995 Stan Shebs <shebs@andros.cygnus.com>
* mpw-config.in: Don't always use te-generic.h for emulation.
(powerpc-apple-macos): Use emulation te-macos.h.
* mpw-make.sed (install, install-only): Edit in Mac-specific
install procedure.
Fri Dec 1 10:59:25 1995 Ian Lance Taylor <ian@cygnus.com>
* configure.in: Improve message about unsupported ELF targets.
* configure: Rebuild.
* config/tc-m88k.c (m88k_do_align): Correct check for whether fill
pattern is zero. From Manfred Hollstein.
Thu Nov 30 13:25:49 1995 Kim Knuttila <krk@cygnus.com>
* config/tc-ppc.c (ppc_pe_section): To get the alignment right for
the various idata sections, we check the name on the .section pseudo.
Thu Nov 30 11:23:42 1995 Manfred Hollstein KS/EF4A 60/1F/110 #40283 <manfred@lts.sel.alcatel.de>
* config/obj-coff.c (fixup_segment): If TC_M88K is defined, do not
add section's paddr to add_number; compatibility to native as and
ld forbids.
Wed Nov 29 23:14:27 1995 Ken Raeburn <raeburn@cygnus.com>
* configure.in: Treat m68k-sysv4 like m68k-elf, not m68k-sysv3.
* hash.c (struct hash_entry): Moved here...
* hash.h (struct hash_entry): ...from here.
* config/obj-elf.c (elf_frob_symbol): Don't free and clear sy_obj
if it's already known to be null.
Wed Nov 29 13:00:20 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-ppc.c (md_apply_fix3): Don't adjust the value for 32
bit relocs converted to PC relative relocs. This turned out to
add the offset from the beginning of .text twice.
Tue Nov 28 10:42:36 1995 Ken Raeburn <raeburn@cygnus.com>
* stabs.c (s_stab_generic): In 's' case, free string from
obstack.
* config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS): Remove unused field
sy_name_offset.
* config/obj-multi.h (ELF_TARGET_SYMBOL_FIELDS) [OBJ_MAYBE_ELF]:
Ditto.
* subsegs.h (segment_info_type): Make bitfields unsigned.
* expr.h (struct expressionS): Make X_op and X_unsigned bitfields,
and move them together. On most systems this will reduce the
structure size by one word.
(operatorT): Define O_max.
* expr.c (expr_begin): Verify that X_op is wide enough to hold
O_max.
* read.c (pop_insert): Print error returned by hash table
insertion code.
* as.c (dump_statistics): Split out from main; dump some hash
table stats and target-specific stats.
(start_time): No longer automatic to main.
(main): Set file-level start_time and call dump_statistics at
exit. Exit by calling xexit.
(show_usage): Make --statistics description less specific.
* subsegs.c (subsegs_print_statistics): New function.
* write.c (write_print_statistics): New function.
(n_fixups): New static variable.
(fix_new_internal): Increment it.
* read.c (read_print_statistics): New function.
* read.h (read_print_statistics): Declare.
Fix typos
2001-03-09 00:06:04 +01:00
* symbols.c (symbol_print_statistics): New function.
* symbols.h (symbol_print_statistics): Declare.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
* hash.c (hash_print_statistics): New function.
* hash.h (hash_print_statistics): Declare.
* config/tc-i386.c (i386_print_statistics): New function.
* config/tc-i386.h (i386_print_statistics): Declare.
(tc_print_statistics): New macro.
* messages.c (as_fatal, as_assert, as_abort): Use xexit, not
exit.
* hash.c (DELETED): Rewrite to use a valid but unique address.
(START_POWER): Reduce to 10.
(enum stat_enum): New enumerator, replacing STAT_* index macros.
Add new values for counting strcmp calls.
(GROW_FACTOR): New macro.
(hash_grow): Use GROW_FACTOR. Rewrite for quick returns instead
of nesting blocks.
(FULL_VALUE): New macro. Use 1/4 of table size instead of 1/2.
(hash_new): Use FULL_VALUE.
(struct hash_control): Definition moved here.
(hash_code): Don't mask to low bits.
(hash_ask): Mask returned hash code here. Check hash value before
calling strcmp; count strcmp calls.
* hash.h (struct hash_control): Declare, don't define, here.
(HASH_STATLENGTH): Deleted.
(struct hash_entry): Add field for hash code.
(hash_say, hash_apply): Don't declare.
* hash.c (destroy): Return void.
(applicatee): Ditto.
(main): Fix declarations.
(hash_apply): Return void. Argument `function' returns void. Put
inside "#ifdef TEST".
(hash_say): Define only if TEST is defined.
* hash.h (hash_apply, hash_say): Declarations deleted.
Mon Nov 27 13:18:25 1995 Ian Lance Taylor <ian@cygnus.com>
* configure: Rebuild with autoconf 2.7.
Tue Nov 21 18:39:01 1995 Ian Lance Taylor <ian@cygnus.com>
* aclocal.m4 (AC_PROG_CC): Remove local definition.
* configure: Rebuild with autoconf 2.6.
Mon Nov 20 17:26:00 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-ppc.c (ppc_debug_name_section_size): Remove.
(ppc_stabx): Don't increment ppc_debug_name_section_size.
(ppc_bc): Likewise.
(ppc_frob_file): Remove.
* config/tc-ppc.h (tc_frob_file): Don't define.
(ppc_frob_file): Don't declare.
Mon Nov 20 13:37:05 1995 Ken Raeburn <raeburn@cygnus.com>
* Makefile.in (TARG_CPU_DEP_alpha): Mention alpha-opcode.h.
* config/alpha-opcode.h: Include one-operand variants of jmp and
jsr.
* config/te-delt88.h: Renamed from te-delta88.h, to avoid conflict
with te-delta.h in 8.3 file systems.
* configure.in: Adjusted.
Thu Nov 16 12:49:38 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (s_err): Remove; just use the one in read.c.
* config/m68k-parse.y (yylex): In MRI mode, '@' can start an octal
number.
* expr.c (operand): Handle MRI suffixes after unadorned 0.
Thu Nov 16 00:21:44 1995 Ken Raeburn <raeburn@cygnus.com>
Version 2.6 released.
* Makefile.in (VERSION): Updated to 2.6.
* config/obj-coff.c (write_object_file): Change use of md_do_align
to pass a pointer rather than a fill value, to match other uses.
Wed Nov 15 03:52:00 1995 Ken Raeburn <raeburn@cygnus.com>
* config/tc-ns32k.h (TC_FIX_TYPE): Add missing semicolon.
* as.c (main): Move md_end call to just after call to
perform_an_assembly_pass. Delete cpu-specific code here.
* config/tc-i960.h (md_end): New macro, calls brtab_emit.
* config/tc-arm.c (md_end): Unused function deleted.
* config/tc-ns32k.c (md_end): Ditto.
* config/tc-i386.c (i386_align_code): New function, moved here
from HANDLE_ALIGN macro.
* config/tc-i386.h (HANDLE_ALIGN): Call it.
Mon Jul 31 14:53:19 1995 Alan Modra <alan@spri.levels.unisa.edu.au>
* config/tc-i386.h (md_do_align): cast fill and 0x90 to char
formatting, tack emacs control vars at end
2005-03-03 02:27:10 +01:00
before comparing
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Mon May 1 10:91:49 1995 Alan Modra <alan@spri.levels.unisa.edu.au>
* config/tc-i386.h (md_do_align): Make ".align n,0x90" generate
multi-byte nops to avoid changing gcc. The necessary gcc change
might break old assemblers.
Sat Apr 22 20:53:05 1995 Alan Modra <alan@spri.levels.unisa.edu.au>
* config/tc-i386.h (md_do_align, HANDLE_ALIGN): Add macros to
generate optimal multi-byte nop instructions for ".align n"
".align n,0x90", and aligns requiring more than 15 bytes of
padding still generate multiple 0x90's as before.
Mon Nov 13 17:40:21 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-m68k.c (s_mri_until): Call pop_mri_control.
Mon Nov 13 20:39:06 1995 Stan Shebs <shebs@andros.cygnus.com>
* configure.in (ppc-*-macos*, ppc-*-mpw*): New configurations.
* configure: Update.
* mpw-make.sed: Reorder commands to make sed happier.
* config/te-macos.h: New file.
* config/tc-ppc.h (TARGET_FORMAT): Set correctly for PowerMac.
Sun Nov 12 21:14:56 1995 Jeffrey A Law (law@cygnus.com)
* config/tc-hppa.c (pa_ip): Fix off-by-2 bug in length check for
conditional branches.
(md_apply_fix): Likewise.
Thu Nov 9 16:14:01 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-a29k.c (md_apply_fix): Warn if an attempt is made to
generate a reloc which the linker will not handle correctly. Fix
overflow checking--R_IREL is 18 bits, not 17.
Wed Nov 8 19:59:36 1995 Ian Lance Taylor <ian@cygnus.com>
* config/obj-coff.c (fixup_segment): Don't subtract md_pcrel_from
from a PC relative reloc if TC_A29K.
* config/tc-a29k.c (line_separator_chars): Restore '@'. Existing
code depends upon it.
* config/tc-a29k.c (md_operand): Handle $float, $double, and
$extend. Based on code from Eric Freudenthal
<freudenthal@nyu.edu>.
* config/tc-a29k.h (LEX_DOLLAR): Define.
* read.c (LEX_DOLLAR): Define if not defined.
(lex_type): Use LEX_DOLLAR.
Wed Nov 8 16:38:14 1995 Eric Freudenthal <freudenthal@nyu.edu>
* configure.in (a29k-nyu-sym1): New target, just like other a29k
targets.
Wed Nov 8 11:38:48 1995 Ian Lance Taylor <ian@cygnus.com>
* config/obj-coff.c (c_dot_file_symbol): Cast xmalloc return.
Tue Nov 7 09:14:35 1995 Kim Knuttila <krk@cygnus.com>
* config/tc-ppc.c (md_apply_fix3): Added BFD_RELOC_RVA. Currently
used only by "dlltool.c".
Mon Nov 6 18:51:26 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-alpha.c: Undefine inline if not __GNUC__.
(md_pseudo_table): Don't define "extern".
Sat Nov 4 00:51:21 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-ppc.c (ppc_biei): Force symbol into text_section.
* config/tc-ppc.c (md_show_usage): Put backslash at end of line.
Fri Nov 3 13:02:59 1995 Ian Lance Taylor <ian@cygnus.com>
* macro.c (macro_expand_body): Don't warn about == with a
nonexistent parameter, in case it is in a comment field.
* as.c (main): On TC_A29K, call macro_init with macro_alternate
set to 1.
* macro.c (get_any_string): Don't keep quotes if macro_strip_at is
set, even if macro_alternate is set.
(get_apost_token): If macro_strip_at, only skip kind if it is '@'.
(sub_actual): If macro_strip_at, and kind is '@', don't look up
the token unless it ended in '@'.
* config/tc-a29k.c (line_separator_chars): Remove '@'.
* doc/c-a29k.texi: Document macro usage on A29K.
Thu Nov 2 23:07:57 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-m68k.c (m68k_ip): Handle new 'W' place, meaning a
signed word.
(install_operand): Likewise.
* config/obj-elf.c (ecoff_debug_pseudo_table): Add "extern".
Wed Nov 1 15:17:02 1995 Manfred Hollstein KS/EF4A 60/1F/110 #40283 <manfred@lts.sel.alcatel.de>
* configure.in (m88k-motorola-sysv*): New target.
* configure: Rebuild.
* config/te-delta88.h: New file.
* config/obj-coff.c (write_object_file): Use md_do_align if it is
defined.
* config/tc-m88k.h (SUB_SEGMENT_ALIGN): Define.
(md_do_align): Define.
* config/tc-m88k.c: Include "subsegs.h".
(m88k_do_align): New function.
* config/te-delta.h (STRIP_UNDERSCORE): Don't define.
(COFF_NOLOAD_PROBLEM): Define.
(LOCAL_LABELS_DOLLAR, LOCAL_LABELS_FB): Define.
Wed Nov 1 16:07:43 1995 Ken Raeburn <raeburn@cygnus.com>
* config/tc-i386.c (md_assemble): For a jump instruction with
non-constant target, require 7 available bytes in the current
frag, not 6.
Tue Oct 31 15:37:16 1995 Fred Fish <fnf@rtl.cygnus.com>
* config/obj-elf.h: Include bfd/elf-bfd.h rather than
bfd/libelf.h.
Tue Oct 31 16:34:28 1995 David Mosberger-Tang <davidm@azstarnet.com>
* configure.in (alpha-*-linux*): Use ecoff.
* configure: Rebuild.
* ecoff.c (ecoff_directive_extern): New function.
(ecoff_directive_weakext): New function.
(ecoff_build_symbols): Handle weak symbols.
(ecoff_setup_ext): Likewise.
(ecoff_frob_symbol): Warn about weak common symbols.
* ecoff.h (ecoff_directive_extern): Declare.
(ecoff_directive_weakext): Declare.
* symbols.c (S_IS_WEAK): New function.
* symbols.h (S_IS_WEAK): Declare.
* config/obj-ecoff.c (obj_pseudo_table): Add "extern" and
"weakext".
* config/tc-mips.c (mips_pseudo_table): Remove "extern".
(s_extern): Remove.
Tue Oct 31 13:29:08 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-ppc.c (ppc_lglobl): Do the right thing.
* config/tc-ppc.c (ppc_bb): Call SF_SET_PROCESS.
(ppc_eb): Likewise. Set the storage class to C_BLOCK, not C_FCN.
(ppc_frob_symbol): Don't change C_BLOCK symbols to C_HIDEXT.
* config/obj-coff.c (coff_frob_symbol): Don't call
SA_SET_SYM_ENDNDX with the current symbol; call it with the next
one. If OBJ_XCOFF, try to figure out whether the symbol is going
to be dropped.
* config/tc-ppc.c (md_pseudo_table): Add "bc" and "ec".
(ppc_stab_symbol): New static variable.
(ppc_change_csect): Check that ppc_toc_csect is not NULL.
(ppc_stabx): Set ppc_stab_symbol around call to symbol_make. Set
sy_tc.real_name to the stab string.
(ppc_bc, ppc_ec): New static functions.
(ppc_canonicalize_symbol_name): If ppc_stab_symbol is set, don't
do anything.
(ppc_symbol_new_hook): If ppc_stab_symbol is set, don't look for a
suffix.
(ppc_frob_symbol): Set BSF_NOT_AT_END for symbols with csect aux
entries.
* input-scrub.c (input_scrub_push): Reset sb_index.
Mon Oct 30 17:52:46 1995 Ian Lance Taylor <ian@cygnus.com>
* listing.c (listing_newline): Don't create a frag in the absolute
section.
Sat Oct 28 01:02:05 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-ppc.c (md_pseudo_table): Add "data" and "text".
(ppc_csect): Move most of the code to ppc_change_csect, and call
it.
(ppc_change_csect): New static function, taken from ppc_csect.
(ppc_section): New static function.
(ppc_saw_abs): New static varable.
(ppc_frob_symbol): Create aux entry for absolute symbols. Warn if
a symbol has no csect.
(ppc_adjust_symtab): New function.
* config/tc-ppc.h (tc_adjust_symtab): Define if OBJ_XCOFF.
(ppc_adjust_symtab): Declare if OBJ_XCOFF.
* write.c (write_object_file): If tc_adjust_symtab is defined,
call it just before the call to obj_adjust_symtab.
* symbols.c (symbol_find_or_make): Change name to be const.
* symbols.h (symbol_find_or_make): Update declaration.
Thu Oct 26 19:18:27 1995 Ken Raeburn <raeburn@cygnus.com>
* doc/as.texinfo (Align): Mention SH.
* doc/c-m68k.texi (M68K-Directives, .even): Describe behavior, not
.align value.
* doc/c-z8k.texi (Z8000 Directives, global): Fix minor typo.
(Z8000 Directives, even): Don't give numeric align value, instead
explain behavior.
Thu Oct 26 11:45:03 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-arm.c (do_ldst): Assemble ldr/str r0, [r1] as a
pre-increment instruction.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Wed Oct 25 11:59:24 1995 Per Bothner <bothner@kalessin.cygnus.com>
* Makefile.in (diststuff): Also make info.
(maintainer-clean realclean): Also make clean-info.
Tue Oct 24 15:21:33 1995 Jeffrey A Law (law@cygnus.com)
* config/tc-hppa.c (md_pseudo_table): Add new ".nsubspa" opcode.
(pa_subspace): For ".nsubspa", always create a new subspace
with the given attributes, even if one already exists with the
same name.
Tue Oct 24 14:50:38 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-ppc.h (TC_FORCE_RELOCATION_SECTION): Rename from
TC_FORCE_RELOCATION, taking an additional section argument. If
the section of the target symbol is not the same as the current
section, always force the relocation to be used.
(MD_PCREL_FROM_SECTION): New macro to call md_pcrel_from_section.
* config/tc-ppc.c (md_pcrel_from_section): Rename from the
md_pcrel_from function, taking an additional section argument.
Invoke TC_FORCE_RELOCATION_SECTION instead of TC_FORCE_RELOCATION.
* write.c (TC_FORCE_RELOCATION_SECTION): Define in terms of the
older TC_FORCE_RELOCATION if not defined.
(MD_PCREL_FROM_SECTION): If not defined, invoke md_pcrel_from.
(fixup_segment): Use MD_PCREL_FROM_SECTION instead of
md_pcrel_from, and TC_FORCE_RELOCATION_SECTION instead of
TC_FORCE_RELOCATION.
Mon Oct 23 16:20:04 1995 Ken Raeburn <raeburn@cygnus.com>
* input-scrub.c (as_where): Set name to null pointer if we don't
have a file name.
* messages.c (identify): Only print filename if non-null.
(as_show_where): Ditto, for line number too.
(as_warn_internal, as_bad_internal): Ditto.
* input-file.c (input_file_open): If the input file can't be
opened, consider it an error.
Mon Oct 23 11:15:44 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
* config/tc-mips.c: Added mips_4100 control, and support for
formatting, tack emacs control vars at end
2005-03-03 02:27:10 +01:00
accepting the 4100 as a MIPS architecture variant (md_begin,
macro_build, mips_ip, md_parse_option). Adding suitable
command-line OPTIONs, and updating the help text (md_show_usage).
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Wed Oct 18 13:20:32 1995 Ken Raeburn <raeburn@cygnus.com>
* subsegs.c (subseg_begin): Only set absolute_frchain.fix_* when
BFD_ASSEMBLER is defined.
* Use one active frag and one obstack per frag chain:
* frags.c (frags): Variable deleted.
(frag_alloc): New function.
(frag_grow, frag_more, frag_variant, frag_now_fix,
frag_append_1_char): Refer to frchain_now->frch_obstack instead of
frags variable.
(frag_new): Ditto. Verify that frch_last and frag_now match on
entry and exit, and that old frag_now has non-zero type. Replace
"know" uses with "assert". Use frag_alloc instead of mucking with
obstack alignment.
* frags.h (frags): Declaration deleted.
* subsegs.h (struct frchain): Add new field frch_frag_now.
* subsegs.c (frchains, dummy_frag, absolute_frchain): New static
variables.
(subsegs_begin): Initialize frchains obstack. Under gcc, don't
give it any stricter alignment than frchainS structures need. Do
not initialize frags obstack. Set frag_now to point to
dummy_obstack. Initialize absolute_frchain.
(subseg_set_rest): Save and restore frag_now in frch_frag_now
field of frchainS. Don't create new frags on section switch, and
use frag_alloc when creating a new frag chain. For absolute
section, set frchain_now to absolute_frchain. Verify that
frch_last and frag_now match on entry and exit. Initialize
per-chain obstack, and under gcc, set required alignment to that
needed by fragS structure.
* write.c (chain_frchains_together_1): Verify fr_type is nonzero.
* stabs.c (get_stab_string_offset): Only copy input string if a
fresh copy is needed, not if the section already exists.
(s_stab_generic): Cache stab section name to bypass lookups, since
usually it will match. Could be made faster still by changing the
memory allocation rules.
(s_xstab): Cache section name to bypass repeated string
allocation.
* frags.c (frag_new): Deleted register declarations.
* listing.c (frag_now): Don't declare.
* as.c (chunksize): New variable.
(debug_memory): New variable.
(main): If debug_memory is set, reduce chunksize and
_bfd_chunksize.
* as.h (chunksize): Declare it.
* read.c (read_begin): Use it.
* config/tc-alpha.c (md_shortopts): Include 'g'.
(md_parse_option): Ignore it.
* Makefile.in (distclean): Remove Makefile and config.status from
testsuite directory.
(clean-here): Don't delete testsuite. Instead, delete only the
files within it that would be generated by running tests.
* config/tc-hppa.c (hppa_elf_mark_end_of_function): Call
frag_now_fix instead of accessing obstack info directly.
* config/tc-arm.c (s_ltorg): Ditto.
(md_assemble): Ditto.
* config/tc-i386.c (md_assemble): Call frag_grow instead of
obstack_room.
Wed Oct 18 12:22:59 1995 Ken Raeburn <raeburn@cygnus.com>
* stabs.c (aout_process_stab): Insert debug symbol into symbol
chain after parsing value expression, if any, to avoid separating
continued .stabs lines.
Mon Oct 16 10:56:41 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (mips_elf_pseudo_table): Remove.
(mips_pop_insert): Don't call pop_insert on mips_elf_pseudo_table.
Mon Oct 16 07:07:37 1995 Michael Meissner <meissner@wogglebug.tiac.net>
* config/tc-ppc.c (md_begin): Use new flags PPC_OPCODE_COMMON for
-mcom support and PPC_OPCODE_ANY for -many.
(md_parse_option): Ditto.
(ppc_arch): Ditto.
(md_begin): For duplicate instructions, print all duplicates
before aborting.
Sun Oct 15 22:06:14 1995 Michael Meissner <meissner@cygnus.com>
* config/tc-ppc.c (md_parse_option): Support for -mcom to turn on
common mode operation.
(md_show_usage): Add -mcom to usage message.
Fri Oct 13 13:32:45 1995 steve chamberlain <sac@slash.cygnus.com>
* expr.c (op_rank): Add O_symbol_rva.
* expr.h (operatorT): Add O_symbol_rva.
* read.c (cons_worker): Set O_symbol_rva when necessary.
* write.c (fix_new_exp): Understand O_symbol_rva.
Tue Oct 10 11:34:14 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c: Correct s_cons arguments. From Michael
Joosten <joost@ori.cadlab.de>.
Mon Oct 9 19:59:53 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-ppc.c (ppc_macro): Make count unsigned.
(ppc_biei): Set segment to now_seg and value to coff_n_line_nos.
(ppc_frob_symbol): Handle C_BINCL and C_EINCL symbols by setting
the fix_line field.
* config/obj-coff.c (coff_n_line_nos): Rename from n_line_nos, and
make non-static. Change all users.
* config/obj-coff.h (coff_n_line_nos): Declare.
Fri Oct 6 16:24:27 1995 Ken Raeburn <raeburn@cygnus.com>
Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* configure.in (AC_ARG_WITH(bfd-assembler)): Fix help message.
* config/obj-elf.c (obj_elf_common): Convert specified byte
alignment to power of two. Set size of local bss symbol.
* config/tc-m68k.c (tc_gen_reloc): Fix typo in variable name.
Fri Oct 6 15:22:25 1995 Ian Lance Taylor <ian@cygnus.com>
* sb.c, macro.c: Decide whether to include <string.h> or
<strings.h> just as as.h does.
Fri Oct 6 09:55:33 1995 Doug Evans <dje@canuck.cygnus.com>
* Makefile.in (site.exp): Fix setting of $srcdir.
* config/tc-arm.c (md_atof): Fix little-endian output.
* config/tc-arm.h (ARM_BI_ENDIAN): Move definition so defined for
all coff targets.
Thu Oct 5 20:17:30 1995 Ken Raeburn <raeburn@cygnus.com>
* doc/as.texinfo: Split out the NS32k family documentation,
despite its being commented out for now.
* doc/c-ns32k.texi: New file.
* sb.c, macro.c: Include string.h.
* Makefile.in (comparison): Only check *.o; we don't care if
timestamps inserted by the native linker differ.
* config/tc-alpha.c (alpha_align): Only fill with a no-op pattern
if alignment stricter than 4 bytes is requested; in that case,
align to a 4-byte boundary first.
Thu Sep 28 19:35:27 1995 Pat Rankin <rankin@eql.caltech.edu>
* config/obj-vms.c (VMS_RSYM_Parse): eliminate "might be used
uninitialized" warning for `Max_Source_Offset'.
Wed Oct 4 16:17:02 1995 Kim Knuttila <krk@cygnus.com>
* config/tc-ppc.c (parse_toc_entry): New function to parse [toc]
qualifiers and detect errors if present.
(md_assemble): Add call to parse_toc_entry. Also added some support
for the [tocv] qualifier.
(ppc_pe_tocd): New function to support data in the toc section.
Wed Oct 4 14:03:39 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-ppc.c (ppc_frob_symbol): Don't create an aux entry for
an absolute symbol.
Tue Oct 3 12:18:19 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-m68k.c (isword): Accept all values from -65536 to
+65535, so ~VAL will not be rejected.
* cond.c (s_endif): Call demand_empty_rest_of_line. In MRI mode,
skip characters after the pseudo-op.
(s_else): Likewise.
* read.c (get_line_sb): Don't look past buffer_limit.
(s_include): In MRI mode, skip characters after the file name.
Mon Oct 2 16:15:27 1995 Ian Lance Taylor <ian@cygnus.com>
* config/m68k-parse.y (m68k_reg_parse): In MRI mode, permit
periods in register names.
Sat Sep 30 23:03:31 1995 Jeff Law (law@hurl.cygnus.com)
* config/tc-hppa.c (hppa_fix_adjustable): DP relative relocs
are not adjustable in SOM to avoid confusing the optimizing
linker.
Fri Sep 29 15:18:08 1995 Ian Lance Taylor <ian@cygnus.com>
Add some support for i960 MRI compatibility mode.
* config/tc-i960.c (md_pseudo_table): Add endian.
(get_args): Don't discard a space between alphanumeric characters.
(get_cdisp): Change text_section to now_seg.
(s_endian): New static function.
* config/tc-i960.h (MRI_MODE_NEEDS_PSEUDO_DOT): Define.
* expr.h (operatorT): Add O_logical_not, O_logical_and, and
O_logical_or.
* expr.c (operand): Treat '!' as logical not operator. If
TC_I960, in MRI mode permit `sizeof secname' and `startof
secname'.
(op_rank): Bump values by 2 to make room for && and ||. Add
entries for !, &&, and ||.
(expr_begin): Only do MRI changes if TC_M68K.
(operator): Recognize || and &&.
(expr): Handle new operatorT values.
* symbols.c (resolve_symbol_value): Handle new operatorT values.
(print_expr_1): Likewise.
* read.c (potable): Add debug, err, irep, irepc, print, purgem,
and rep.
(read_a_source_file): Handle MRI_MODE_NEEDS_PSEUDO_DOT.
(mri_comment_field): Only handle weird comments if TC_M68K.
(s_err): New function.
(s_org): Only punt in MRI mode if TC_M68K.
(s_mri_sect): Write TC_I960 version.
(s_print, s_purgem): New functions.
* read.h (s_err, s_print, s_purgem): Declare.
* cond.c (s_ifeqs): Implement.
(ignore_input): Handle MRI_MODE_NEEDS_PSEUDO_DOT.
* macro.c (macro_strip_at): New static variable.
(macro_init): Add strip_at parameter.
(do_formals): If macro_strip_at, change NARG to $NARG.
(define_macro): Skip a comma after the macro name.
(get_apost_token): Skip character if macro_strip_at, even if
macro_mri.
(macro_expand_body): If macro_strip_at, don't recognize parameters
in strings unless they are preceded by an '@'. If macro_strip_at,
pass '@' as strip character to sub_actual. If macro_strip_at,
strip '@' characters.
(macro_expand): If macro_strip_at, change NARG to $NARG.
(delete_macro): New function.
(expand_irp): Skip leading and trailing '"' characters if irpc.
* macro.h (macro_init): Mention new strip_at parameter.
(delete_macro): Declare.
* as.c (main): If TC_I960, pass flag_mri to macro_init as
strip_at; otherwise, pass 0.
* gasp.c (process_pseudo_op): Pass 0 to macro_init as strip_at.
(main): Likewise.
* doc/as.texinfo: Document i960 MRI mode.
* as.c (show_usage): Mention --defsym.
Thu Sep 28 19:25:04 1995 Stan Shebs <shebs@andros.cygnus.com>
* mpw-config.in: Translate "powerpc" into "ppc", remove gen of
VERSION, move gen of "conf" here from makefile.
* mpw-make.sed: New file, sed commands to translate Unix makefile
into MPW syntax.
* mpw-make.in: Remove.
* mac-as.r: New file, Mac resource file.
* as.h (inline): Don't decide about defining if __MWERKS__,
remove redundant conditional and definition.
* stabs.c (s_stab_generic): Fix syntax for OBJ_PROCESS_STAB.
Thu Sep 28 15:43:15 1995 Kim Knuttila <krk@nellie>
* config/tc-ppc.c (md_apply_fix3): Removed some TE_PE specific
manipulations, since I can't prove they're needed.
(md_begin): Removed init_regtable, insert_reg, and the call points.
(register_name): New function. Parses a register name, if appropriate.
(md_assemble): Added call to register_name to handle symbolic names.
(ppc_pe_section): Removed all duplicate IMAGE defines, and include
coff/pe.h instead.
Thu Sep 28 12:09:19 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-ppc.h (tc_fix_adjustable): Define.
(ppc_pe_fix_adjustable): Declare.
* config/tc-ppc.c (ppc_pe_fix_adjustable): New function.
Thu Sep 28 01:11:58 1995 Doug Evans <dje@deneb.cygnus.com>
* config/tc-arm.h (TARGET_FORMAT): Define for arm-coff.
Wed Sep 27 12:53:58 1995 Ian Lance Taylor <ian@cygnus.com>
* symbols.c (S_IS_LOCAL): All symbols in reg_section are local.
* config/tc-ppc.h (OBJ_XCOFF): Define if OBJ_COFF and not TE_PE.
Change OBJ_COFF checks to check OBJ_XCOFF instead.
(TARGET_FORMAT): Fully parenthesize.
(LEX_QM): Define if TE_PE.
* config/tc-ppc.c: Replace OBJ_COFF by OBJ_XCOFF throughout.
Remove checks of TE_PE within #ifdef OBJ_XCOFF sections.
(init_regtable): Make i unsigned.
(ppc_set_current_section): Rename from setCurrentSection. Change
all callers.
(ppc_arch): Return after as_fatal to avoid gcc warning.
(md_assemble): Only declare reloc if OBJ_ELF. Add default to
switch on fixups[i].reloc to avoid gcc warning.
(IMAGE_SGN_LNK_OTHER): Fix nested comment.
(ppc_pe_function): Don't call ppc_canonicalize_symbol_name.
(ppc_frob_symbol): Remove TE_PE section checks.
(md_estimate_size_before_relax): Return after abort to avoid gcc
warning.
(md_apply_fix3): Add BFD_RELOC_16_GOT_PCREL to switch.
* read.c (LEX_QM): Define as 0 if not defined.
(lex_type): Use LEX_QM for '?'.
* configure.in: No need to check whether ${cpu_type} is powerpc;
it never will be.
* configure: Rebuild.
Wed Sep 27 11:33:38 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-ppc.c (md_apply_fix3): Remove Sep 26 changes to this
function, keeping other Sep. 26 changes.
Wed Sep 27 10:29:13 1995 Kim Knuttila <krk@nellie>
* configure (emulations): Added support for ppcle-*-[pe|winnt]
(target_frag): Removed an extraneous PPC definition.
* configure.in (emulations): Same
* config/tc-ppc.h:
* config/tc-ppc.c (md_pseudo_table): Base support for new or altered
pseudo ops - <previous, pdata, ydata, reldata, rdata, ualong, znop,
section, comm, function> There will be more.
(pre_defined_registers): Predefined reg table to name registers, etc
(md_begin): Setup reg table initialization
(md_assemble): Initial [toc]x(rtoc) support
(ppc_frob_label): Removed some xcoff specific processing from TE_PE
(ppc_frob_symbol): Removed some xcoff specific processing from TE_PE
formatting, tack emacs control vars at end
2005-03-03 02:27:10 +01:00
Added support for more predefined sections
(ppc_frob_section): Removed some xcoff specific processing from TE_PE
19990502 sourceware import
1999-05-03 09:29:11 +02:00
(ppc_fix_adjustable): Removed from TE_PE mainline
(md_apply_fix3): For TE_PE toc entries, we don't need to mess
formatting, tack emacs control vars at end
2005-03-03 02:27:10 +01:00
with fx_addnumber. Removed for the time being.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
(lots): Put back missing assignments to ppc_current_csect.
Tue Sep 26 14:57:59 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-ppc.c (ppc_elf_suffix): Support all of the V.4
relocations.
(ppc_elf_cons): Remove restriction that @ suffixes must be done
with .long. Add error if relocation does not fit in the number of
bytes provided.
(md_assemble): For absolute branches, map PC relative relocations
back into an equivalent absolute relocation.
(md_pcrel_from): If TC_FORCE_RELOCATION is true, relocation offset
is 0, not segment start.
(md_apply_fix3): Don't bother writing addend into the instruction,
since it is ignored, given that we use RELA relocations for ELF.
* config/tc-ppc.h (TC_FORCE_RELOCATION): Define to force all
branch prediction relocations to always be emitted.
Mon Sep 25 16:08:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-ppc.c (ppc_elf_suffix): Lower case reloc before
testing.
(md_assemble): Be more robust in terms of relocations.
(md_apply_fix3): Allow 14 bit relocs to be emitted for external
symbols in addition to 26 bit relocs. Properly insert 26/14 bit
reloc value fields into the instruction stream.
Mon Sep 25 00:23:16 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-arm.c (md_atof): Output little endian constants in
little endian mode.
* config/obj-coff.c (obj_coff_section): Pass &type, not type,
s_mri_sect.
* configure.in: Fix typo: fmt-elf to fmt=elf.
Fri Sep 22 16:34:46 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-ppc.c (ppc_elf_suffix): Rewrite to use a table of
strings and relocations they represent. Add @br{,n}taken for
branch taken/not taken support.
(md_apply_fix3): Add BFD_RELOC_PPC_B16_BR{,N}TAKEN support.
Thu Sep 21 21:10:17 1995 Michael Meissner <meissner@cygnus.com>
* config/tc-ppc.c (md_parse_option): -mrelocatable-lib now only
sets EF_PPC_RELOCATABLE_LIB and not also EF_PPC_RELOCATABLE.
Thu Sep 21 16:30:56 1995 Ian Lance Taylor <ian@cygnus.com>
* subsegs.c (subseg_set): Permit SEG_ABSOLUTE in know expression.
* expr.c (expr): Account for new operatorT values in know
expression.
* write.c (fixup_segment): Clear fixp->fx_subsy if the relocation
is fully resolved.
Thu Sep 21 14:11:49 1995 Michael Meissner <meissner@cygnus.com>
* config/tc-ppc.c (ppc_flags): New variable to hold the flag bits
to set in the ELF header.
(md_parse_option): Add support for -mrelocatable-lib. Make both
-mrelocatable and -mrelocatable-lib set ppc_flags.
(md_begin): Set ELF flags with ppc_flags.
Wed Sep 20 13:01:52 1995 Ian Lance Taylor <ian@cygnus.com>
* Makefile.in (maintainer-clean): New target, synonym for
realclean. Add GNU standard maintainer-clean echos.
* doc/Makefile.in (maintainer-clean): New target, synonym for
realclean.
Tue Sep 19 11:31:31 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-m68k.c (m68k_ip): Reject immediate operands for '%'.
* config/tc-m68k.c (m68k_ip): Reject immediate operands for '|'.
Replace 'P' with '0', '1', and '2'.
* config/tc-m68k.c (parse_mri_control_operand): Change leftstop
and rightstop to not be const.
(parse_mri_control_expression): Likewise.
(build_mri_control_operand): Likewise. Use m68k_ip_op to examine
the operand, not m68k_reg_parse.
(s_mri_if): In MRI mode, stop at the first '*'.
(s_mri_while): Likewise.
(s_mri_else): In MRI mode, ignore trailing characters.
(s_mri_endi, s_mri_break, s_mri_next, s_mri_for): Likewise.
(s_mri_endf, s_mri_repeat, s_mri_until, s_mri_endw): Likewise.
* config/m68k-parse.y: Revert yesterday's change.
* config/m68k-parse.h: Revert yesterday's change.
Mon Sep 18 15:22:28 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-m68k.c (parse_mri_control_operand): Change leftstart
and rightstart to not be const.
(parse_mri_control_expression): Likewise.
(build_mri_control_operand): Likewise. If the left side of the
comparison is a register, and the right side is not, swap the two
sides.
* config/m68k-parse.y (m68k_reg_parse): Make globally visible.
* config/m68k-parse.h (m68k_reg_parse): Declare.
* read.c (mri_comment_field): New function.
(mri_comment_end): New function.
(s_align_bytes): Use mri_comment_field.
(s_align_ptwo, s_comm, s_mri_common, s_fail, s_globl): Likewise.
(s_float_space, s_struct): Likewise.
(s_space): Use mri_comment_field rather than doing it by hand.
(cons_worker, equals): Likewise.
(s_end): Ignore comments starting with '*' or '!'.
* read.h (mri_comment_field): Declare.
(mri_comment_end): Declare.
* cond.c (s_if): Use mri_comment_field.
* config/tc-m68k.c (s_chip, s_reg): Likewise.
* write.c (fixup_segment): Handle ABS-sym in -sym case rather than
sym-sym case.
* config/obj-coff.c (fixup_segment): Likewise. Permit negative
symbols if TC_M68K.
* config/tc-m68k.c (tc_coff_fix2rtype): If fx_tcbit is set, return
R_RELLONG_NEG.
(tc_gen_reloc): If fx_tcbit is set, abort.
(md_apply_fix_2): For a negative reloc, move fx_subsy to fx_addsy,
and set fx_tcbit.
* config/tc-m68k.c (s_reg): Ignore comment field in MRI mode.
Mon Sep 18 14:44:04 1995 Arne H. Juul <arnej@pvv.unit.no>
* configure.in (mips-dec-netbsd*): New target.
* configure: Rebuild.
Sun Sep 17 22:17:43 1995 Ian Lance Taylor <ian@cygnus.com>
* configure.in: Set endian to little for mips-*-ultrix*.
* configure: Rebuild.
Fri Sep 15 13:16:55 1995 Ian Lance Taylor <ian@cygnus.com>
* expr.c (current_location): New static function. Handle magic
symbol `.'; in absolute section, return a constant.
(operand): Call current_location for '.' and '$', instead of doing
it inline. In MRI mode, call current_location for '*'.
Fri Sep 15 21:39:29 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-m68k.c: Change some "CONST" references to "const".
Fri Sep 15 17:27:41 1995 Ken Raeburn <raeburn@cygnus.com>
Tue Sep 12 17:08:23 1995 Pat Rankin <rankin@eql.caltech.edu>
* config/obj-vms.c (VMS_stab_parse): simplify first loop;
use S_GET_NAME/modify/S_SET_NAME sequence instead of abusing
S_GET_NAME when updating symbol name.
(local_symbols_DST): first prefix/postfix typo from July 21st.
[plus comment reformatting --kr]
Wed Sep 13 12:33:03 1995 Ian Lance Taylor <ian@cygnus.com>
* Makefile.in (EXPECT): New variable.
(CHECKFLAGS): Remove.
(site.exp): New target.
(check): Rewrite to invoke runtest directly, rather than recurring
down into testsuite.
(clean-here): Remove testsuite directory.
(clean, distclean): Don't recur into testsuite.
* configure.in: Don't call AC_CONFIG_SUBDIRS(testsuite).
* configure: Rebuild.
* write.c (relax_and_size_seg): Change to the segment we are
relaxing, in case md_convert_frag, called by cvt_frag_to_fill,
wants to call fix_new.
* config/tc-m68k.c (m68k_ip): Permit PC relative code if the
segment of the symbol is the current segment, not just in
text_section.
(md_convert_frag_1): Don't call subseg_change.
(md_estimate_size_before_relax): Likewise.
Tue Sep 12 10:36:40 1995 Doug Evans <dje@canuck.cygnus.com>
* config/tc-arm.c (md_atof): Fix debugging printf, and leave it
out by default.
Mon Sep 11 11:39:11 1995 Ian Lance Taylor <ian@cygnus.com>
* doc/configure.in: Remove unused file.
* app.c (do_scrub_chars): Grab all available spaces at start of
line before preserving a single space. Remove state == 0 test
which will never succeed.
* macro.c (macro_expand_body): Delete local variables from the
formal hash table.
(macro_expand): In MRI mode, stop when whitespace is seen in the
argument list.
* sb.c: Include "libiberty.h".
* macro.c: Likewise. Also include <stdlib.h> if it exists.
Fri Sep 8 00:27:46 1995 Ian Lance Taylor <ian@cygnus.com>
* app.c (do_scrub_chars): In MRI mode, keep a space before a
possible comment character.
* config/tc-m68k.c (m68k_ip): In MRI mode, ignore anything after
an instruction which takes no operands.
* Makefile.in (install): Don't install gasp in $(tooldir).
* config/tc-mips.c (macro): Handle a non zero base register for
M_U{L,S}{D,W,H}_A.
* gasp.c (show_usage): Put program_name argument in first fprintf,
not second.
Thu Sep 7 12:33:58 1995 Ian Lance Taylor <ian@cygnus.com>
* expr.c (operand): Handle 08 and 09 in MRI mode.
* macro.c (ISSEP): Remove duplicated `"' character.
formatting, tack emacs control vars at end
2005-03-03 02:27:10 +01:00
(get_any_string): Copy some characters for which ISSEP is true:
19990502 sourceware import
1999-05-03 09:29:11 +02:00
';', '>', '(', ')'. Otherwise we can get in an infinite loop.
* read.c (s_space): In MRI mode, the expressions stop at the first
unquoted space.
(cons_worker): In MRI mode, restore the terminating character at
the end of the function.
* read.c (cons_worker): Don't use #elif; old compilers don't
support it.
Wed Sep 6 21:13:06 1995 Ian Lance Taylor <ian@cygnus.com>
* app.c (do_scrub_chars): In MRI mode, silently end quoted strings
at newline characters. In MRI mode, always keep spaces in the
operands field. In MRI mode, treat a line comment character as a
regular comment character following a space.
* cond.c (ignore_input): Use strncasecmp rather than strncmp when
looking for special pseudo-ops.
* read.c (cons_worker): In MRI mode, the expressions stop at the
first unquoted space.
(equals): Likewise.
Wed Sep 6 15:03:53 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* config/tc-sh.c (get_operands): Read third arg if it exists.
Otherwise, clear it.
(get_specific, case F_FR0): Add.
Wed Sep 6 15:03:53 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* config/tc-sh.c (get_specific): Delete arg_to_test.
(md_assemble): Increase operand array from 2 to 3.
Tue Sep 5 16:47:36 1995 Stan Shebs <shebs@andros.cygnus.com>
* config/tc-mips.c: Remove CYGNUS LOCAL comments.
(md_begin): Use 0/1 instead of TRUE/FALSE.
(md_show_usage): Break up long format string for the benefit
of lame compilers.
* config/tc-m68k.c (md_show_usage): Ditto.
* gasp.c (show_usage): Ditto.
* macro.c (check_macro): Cast result of hash_find.
Tue Sep 5 14:46:38 1995 Ken Raeburn <raeburn@cygnus.com>
* configure.in: When testing for a free() declaration in system
header files, cast the address to a function pointer, not to an
integer.
* write.c (fix_new_internal): Call TC_INIT_FIX_DATA if TC_FIX_TYPE
is defined. Don't initialize fx_bsr. Verify that fx_size field
is wide enough to hold stored value.
* write.h (struct fix): Change tc_fix_data to type TC_FIX_TYPE if
that is defined, otherwise omit it. Delete fx_bsr. Change
fx_size to unsigned char.
* config/tc-i960.h (TC_FIX_TYPE, fx_bsr, TC_INIT_FIX_DATA): New
macros.
* config/tc-ns32k.h (TC_FIX_TYPE, fx_bsr, TC_INIT_FIX_DATA): New
macros.
* config/tc-hppa.h (TC_FIX_TYPE): Define as PTR.
* config/tc-i860.c (md_apply_fix): Delete code for checking
fx_im_disp, and for handling non-zero values, since it never gets
set after being initialized to zero.
* write.h (struct fix): Make fx_im_disp always 2 bits, since the
only tc-* files actually using it need that much.
NS32K changes from Ian Dall:
* configure.in: Treat ns32k-pc532-ux* like ns32k-pc532-mach*, and
ns32k-pc532-lites* like ns32k-pc532-netbsd*.
* config/tc-ns32k.h (LOCAL_LABELS_FB): Define to 1.
Fri Sep 1 17:02:15 1995 steve chamberlain <sac@slash.cygnus.com>
* write.c (fixup_segment): Get TC_FORCE_RELOCATION up the
right way!
Fri Sep 1 08:20:19 1995 James G. Smith <jsmith@beauty.cygnus.com>
formatting, tack emacs control vars at end
2005-03-03 02:27:10 +01:00
* config/tc-mips.c (md_parse_option, md_begin, md_show_usage):
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Add support for "-mcpu=vr4300" as processor identifier.
Thu Aug 31 16:41:06 1995 steve chamberlain <sac@slash.cygnus.com>
* write.c (fixup_segment): Remove change of 29th.
* config/tc-{i386,arm}.h (TC_FORCE_RELOCATION): Keep RVA relocs.
Tue Aug 29 19:42:58 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* config/tc-m68k.c (m68k_ip) [case POST/PRE/BASE]: Fix typo when
formatting, tack emacs control vars at end
2005-03-03 02:27:10 +01:00
looking at outer displacement. Don't set the postindex bit if the
index suppress bit is set (for memory indirect addressing mode).
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Thu Aug 31 06:49:37 1995 Doug Evans <dje@canuck.cygnus.com>
* config/tc-arm.c (tc_gen_reloc): Delete duplicated code.
Wed Aug 30 23:51:57 1995 Ian Lance Taylor <ian@cygnus.com>
* app.c (do_scrub_chars): Free saved_input when the from buffer
exactly fills the to buffer.
Wed Aug 30 13:46:39 1995 Doug Evans <dje@canuck.cygnus.com>
* config/tc-sparc.c (parse_keyword_arg, parse_const_expr_arg): New fns.
(sparc_ip): Call them for asi, membar, and prefetch parsing.
Tue Aug 29 15:45:37 1995 Doug Evans <dje@canuck.cygnus.com>
* config/tc-sparc.c (membar_masks): Deleted.
(sparc_ip): Clean up ASI and membar support.
Tue Aug 29 13:20:27 1995 steve chamberlain <sac@slash.cygnus.com>
* read.c (potable): Rva is new entry.
(cons_worker): New, split from cons. Handles rva.
(cons, s_rva): Call cons_worker.
* read.h (s_rva): New declaration.
* write.c (fixup_segment): Don't throw away rva relocs.
* config/tc-arm.c (md_apply_fix, tc_gen_reloc): Handle RVA.
* config/tc-i386.c (tc_coff_fix2type): Handle RVA.
* config/tc-i386.h (TC_COUNT_RELOC): Remember RVAs.
(TC_RVA_RELOC): New definition.
Sun Aug 27 17:41:05 1995 Doug Evans <dje@canuck.cygnus.com>
* config/tc-arm.c (do_swi): Allow optional leading '#'.
Sat Aug 26 17:24:20 1995 Ian Lance Taylor (ian@cygnus.com)
* config/tc-m68k.c (comment_chars): If TE_DELTA is defined,
include '#'.
* config/tc-m68k.h (NO_PSEUDO_DOT): Define if TE_DELTA is
defined.
* config/te-delta.h: Include obj-format.h.
* config/te-sco386.h: Likewise.
* config/te-sysv32.h: Likewise.
* app.c (scrub_file): Remove.
(scrub_from_file, scrub_to_file): Remove.
(scrub_string, scrub_last_string): Remove.
(scrub_from_string, scrub_to_string): Remove.
(saved_input, saved_input_len): New static variables.
(struct app_saved): Remove scrub_string, scrub_last_string, and
scrub_file fields. Add saved_input and saved_input_len fields.
(app_push): Adjust saved fields for changes in struct app_save.
Initialize state and saved_input.
(app_pop): Adjust saved fields for changes in struct app_save.
(do_scrub_chars): Rename from do_scrub_next_char and rewrite to
process a buffer at a time rather than a character at a time.
(main, as_warn): Remove obsolete testing code.
* as.h (do_scrub_next_char): Don't declare.
(do_scrub_chars): Declare.
(scrub_from_file, scrub_from_string): Don't declare.
(scrub_to_file, scrub_to_string): Don't declare.
* input-file.c (input_file_get): New static function.
(input_file_give_next_buffer): Call do_scrub_chars rather than
do_scrub_next_char.
* read.c (scrub_string, scrub_string_end): New static variables.
(scrub_from_string): New static function.
(read_a_source_file): Call do_scrub_chars rather than
do_scrub_next_char.
Thu Aug 24 18:50:19 1995 Ian Lance Taylor (ian@cygnus.com)
* gasp.c (as_abort): New function.
* sb.c (sb_build): Revert yesterday's patch.
* Makefile.in (gasp.new): Depend upon ../libiberty/libiberty.a.
Just link against libiberty, not against $(LIBS).
Wed Aug 23 15:18:20 1995 Ian Lance Taylor (ian@cygnus.com)
* sb.c (sb_build): Undefine abort before calling it, since gasp
does not provide as_abort.
Wed Aug 23 10:40:41 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-ppc.c (set_target_endian): New static to say whether
we've initialized target_big_endian or not.
(md_parse_option): Set set_target_endian if we set the variable
target_big_endian.
(md_begin): Only set target_big_endian if !set_target_endian.
Tue Aug 22 03:00:33 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
Sat Aug 19 18:08:16 1995 Pat Rankin <rankin@eql.caltech.edu>
* config/obj-vms.h (DST_S_C_SRC_SETREC_W, DST_S_C_SRC_DEFLINES_B):
New macros.
* config/obj-vms.c (VMS_TBT_Line_PC_Correlation,
VMS_TBT_Source_Lines): Make traceback info be robust enough to
handle huge source files.
(VMS_TBT_Source_File): Reorganize the native- vs cross-assembly
support so that actual object file output is clearer.
(VMS_TBT_Source_File: Fab, Nam, Date_Xab, File_Header_Xab):
Replace static variables with automatic ones.
Sat Aug 12 20:18:15 1995 Pat Rankin <rankin@eql.caltech.edu>
* config/obj-vms.c (Module_Name): new file scope variable.
(VMS_TBT_Module_Begin): use it instead of local variable.
(Write_VMS_MHD_Records): ditto; assign its value here.
(Write_VMS_EOM_Record): second argument has type valueT.
(VMS_Initialized_Data_Size): simplify search loop; return
type is offsetT; second argument is unsigned.
Sat Jun 17 19:05:25 1995 Pat Rankin (rankin@eql.caltech.edu)
* messages.c (as_perror): Use xstrerror instead of strerror.
Mon Aug 21 13:57:20 1995 Ian Lance Taylor <ian@cygnus.com>
* as.c (parse_args): Accept --defsym SYM=VALUE.
* doc/as.texinfo, doc/as.1: Document --defsym.
* read.c (read_a_source_file): In MRI mode, don't end the
statement inside a quotation.
(s_space): Don't warn about a zero repeat count in MRI mode.
* config/tc-m68k.c (crack_operand): In MRI mode, don't count
parentheses inside quotes.
(md_assemble): In MRI mode, anything after the operands field is a
comment.
(parse_mri_control_operand): Adjust start and stop to remove
spaces.
(s_mri_for): Likewise.
* cond.c (s_ifdef): Restore the character after the symbol name,
in case it is a newline.
(s_if): If ignoring the current tree, don't try to parse the
expression.
* app.c (do_scrub_next_char): If LEX_IS_STRINGQUOTE or
LEX_IS_ONECHAR_QUOTE is seen in state 10, preserve one space.
* doc/as.texinfo: Document irp, irpc, macro, and rept. MRI mode
now supports macros, ifc, ifnc, irp, irpc, rept, and endr, without
using gasp.
Add support for macros.
* as.c: Include sb.h and macro.h.
(max_macro_next): New global variable.
(main): Call macro_init.
(macro_expr): New static function.
* as.h (max_macro_nest): Declare.
* read.c (line_label): Rename from mri_line_label. Change all
uses.
(potable): Add exitm, irp, irpc, macro, mexit, rept.
(read_a_source_file): Always clear line_label at the start of a
line, not just when flag_mri or LABELS_WITHOUT_COLONS. Fix
MRI/LABELS_WITHOUT_COLONS handling. In MRI mode, permit label:
equ val. Set line_label when calling colon. In MRI mode, a
leading '.' does not imply a pseudo-op. Check for macro expansion
before calling md_assemble.
(s_irp): New function.
(get_line_sb): New static function.
(s_macro): New function.
(s_mexit): New function.
(s_rept): New function.
* read.h (line_label): Rename from mri_line_label.
(s_irp, s_rept): Declare.
(s_macro, s_mexit): Declare.
* input-scrub.c: Include sb.h.
(sb_index, from_sb): New static variables.
(macro_nest): New static variable.
(struct input_save): Add sb_index and from_sb fields. Change
next_saved_file field to be struct input_save *.
(next_saved_file): Changed to be struct input_save *.
(input_scrub_push): Change to return type struct input_save *.
Save sb_index and from_sb.
(input_scrub_pop): Change parameter type to struct input_save *.
Restore sb_index and from_sb.
(input_scrub_include_sb): New function.
(input_scrub_next_buffer): Handle reading from from_sb.
(bump_line_counters): Only increment lines if not using from_sb.
* config/tc-m68k.c (opt_table): Add nest.
(opt_nest): New static function.
* gasp.c: Include sb.h and macro.h. Move all sb related functions
and definitions to sb.h and sb.c. Move all macro related
functions and definitions to macro.h and macro.c.
* sb.h, sb.c: New files, extracted from gasp.c.
* macro.h, macro.c: Likewise.
* Makefile.in (OBJS): Add sb.o and macro.o
(GASPOBJS): Define.
(gasp.new): Depend upon $(GASPOBJS). Use $(GASPOBJS) to link.
(TARG_CPU_DEP_m68k): Depend upon subsegs.h.
(gasp.o): Depend upon sb.h and macro.h.
(sb.o): New target.
(macro.o): New target.
(as.o): Depend upon sb.h and macro.h.
(input-scrub.o): Depend upon sb.h.
(read.o): Depend upon sb.h and macro.h.
* cond.c (get_mri_string): New static function.
(s_ifc): New function.
* read.c (potable): Add ifc and ifnc.
* read.h (s_ifc): Declare.
* app.c (do_scrub_begin): In MRI mode, set lex of ' to
LEX_IS_STRINGQUOTE.
Mon Aug 21 13:41:33 1995 Michael Meissner <meissner@cygnus.com>
* config/tc-ppc.c (md_assemble): Allow @HA, @L, and @H suffixes on
constant expressions.
Sun Aug 20 15:54:37 1995 Jim Wilson <wilson@cygnus.com>
* config/tc-arm.c (md_reloc_size): Add const to declaration.
Fri Aug 18 10:58:09 1995 Ian Lance Taylor <ian@cygnus.com>
* read.c (s_include): In MRI mode, don't expect quotes around the
file name.
* listing.c (listing_title): Don't require the title to be quoted.
* gasp.c (include_print_where_line): Always subtract 1 from
linecount before printing it.
(process_file): In MRI mode, lines beginning with '*' or '!' are
comments.
(do_reg): In MRI mode, don't require parentheses.
(do_include): In MRI mode, don't requires quotes. If the file can
not be found in the include path, try opening it in the current
directory. Print the file name correctly in the error message.
(chartype_init): In MRI mode, set FIRSTBIT for '.'.
(main): Set comment_char to ';' when entering MRI mode.
* config/tc-m68k.c: Include subsegs.h.
(m68k_ip): Pass 64 rather than -1 to add_Fix in 'B' 'B' case.
(md_pcrel_from): If fx_pcrel_adjust is 64, use -1 instead.
* config/tc-sparc.h (tc_fix_adjustable): For OBJ_AOUT case, adjust
BFD_RELOC_16 and BFD_RELOC_32 relocs.
Wed Aug 16 14:48:44 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
* as.h (alloca): Use void* declaration on HP/UX.
Wed Aug 16 12:49:17 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-sparc.c (tc_gen_reloc): If PIC, only change PCREL_S2
to WPLT30 for an undefined or external symbol. Don't consider
PC10 or PC22 to be a PC relative reloc when choosing between
fx_addnumber and fx_offset.
* config/tc-z8k.c (md_number_to_chars): Don't do it here, call
number_to_chars_bigendian.
* config/tc-z8k.h (TARGET_BYTES_BIG_ENDIAN): Define.
* expr.c (operand): Add support for .startof. and .sizeof. by
using magic symbol names which the linker will recognize
specially.
* doc/as.texinfo: Take out note that .startof. and .sizeof. are
not supported.
Tue Aug 15 15:08:49 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-m68k.c (md_pseudo_table): Add MRI structured control
directives: if, if.b, if.w, if.l, else, else.s, else.l, endi,
break, break.s, break.l, next, next.s, next.l, for, for.b, for.w,
for.l, endf, repeat, until, until.b, until.w, until.l, while,
while.b, while.w, while.l, endw.
(enum mri_control_type): Define.
(struct mri_control_info): Define.
(mri_control_stack): New static variable.
(mri_control_index): New static variable.
(mri_control_label): New static function.
(push_mri_control, pop_mri_control): New static functions.
(parse_mri_condition): New static function.
(parse_mri_control_operand): New static function.
(swap_mri_condition, reverse_mri_condition): New static functions.
(build_mri_control_operand): New static function.
(parse_mri_control_expression): New static function.
(s_mri_if, s_mri_else, s_mri_endi): New static functions.
(s_mri_break, s_mri_next): New static functions.
(s_mri_for, s_mri_endf): New static functions.
(s_mri_repeat, s_mri_until): New static functions.
(s_mri_while, s_mri_endw): New static functions.
* gasp.c (mrikinfo): Remove IF.
* expr.c (get_symbol_end): Accept \001 as part of a name.
* symbols.c (colon): Change parameter to const char *.
* symbols.h (colon): Update declaration.
Mon Aug 14 20:51:56 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
* write.c (write_contents): Always do it the BFD_FAST_SECTION_FILL
way. Reformat and reindent that code to GNU standards.
(BFD_FAST_SECTION_FILL): Don't define.
Mon Aug 14 14:08:07 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (md_apply_fix): Don't try to apply BEGIN_BRTAB
or END_BRTAB fixups.
Mon Aug 14 15:45:07 1995 Ian Lance Taylor <ian@cygnus.com>
* gasp.c (do_align, get_any_string): Mark as static.
(do_assigna, do_assignc, new_file): Likewise.
* config/tc-m68k.c (s_reg): Rename local op to rop to avoid
confusion with macro op.
* gasp.c (strip_comments): Comment out; it's not used.
(do_end): Add parameter. In MRI mode, print it out.
(do_irp): New static function.
(sub_actual): Change parameter m to formal_hash, changing type
from macro_entryh * to hash_table *.
(macro_expand_body): New static function, broken out of
macro_expand.
(macro_expand): Call macro_expand_body.
(K_*): Fully parenthesize.
(K_IRP, K_IRPC): Define.
(mrikinfo): Add IRP and IRPC.
(process_pseudo_op): In MRI mode, print out END pseudo-op. Pass
line to do_end. Handle K_IRP and K_IRPC.
* config/tc-m68k.c (s_opt): Reset *input_line_pointer even if we
don't do anything with the option.
Sun Aug 13 17:03:58 1995 Ian Lance Taylor <ian@cygnus.com>
* frags.c (frag_align): Handle absolute_section.
* write.c (record_alignment): Likewise.
* config/tc-mips.c (macro_build): Skip insns with an inappropriate
ISA level.
Sun Aug 13 00:35:02 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (md_pseudo_table): Add entries for
"begin_brtab" and "end_brtab" pseudo-ops.
(pa_brtab): New function.
(tc_gen_reloc, SOM version): Handle R_BEGIN_BRTAB and R_END_BRTAB.
(hppa_force_relocation): Force relocations for BRTAB fixups
when OBJ_SOM is defined.
Fri Aug 11 20:34:05 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
* Makefile.in (TE_OBJS): Add empty definition.
Fri Aug 11 19:16:08 1995 Ian Lance Taylor <ian@cygnus.com>
* gasp.c (change_base): Don't treat ' specially in MRI mode.
(process_file): Don't warn about missing END in MRI mode.
(do_if): New static function.
(get_mri_string, do_ifc): New static functions.
(buffer_and_nest): Treat MRI mode like alternate syntax mode.
(do_aendr): Change error message in MRI mode.
(do_arepeat): Use REPT/ENDR in MRI mode.
(do_formals): In MRI mode, add special NARG formal.
(macro_expand): Various changes for MRI mode: permit a qualifier
on the macro name; set special NARG formal; permit unnamed
positional arguments; use && to concatenate named parameters;
permit \d to specify an unnamed parameter; permit named parameters
to not start with \; use == to see if a parameter exists.
(getstring): In MRI mode, allow <> to quote a string.
(K_IFEQ, K_IFNE, K_IFLT, K_IFLE, K_IFGE, K_IFGT): Define.
(K_IFC, K_IFNC): Define.
(struct keyword): Name structure used in kinfo array.
(mrikinfo): New static array.
(process_pseudo_op): Don't require leading '.' in MRI mode.
Handle new MRI pseudo-op definitions.
(add_keyword): New static function, broken out of process_init.
(process_init): Use add_keyword. In MRI mode, add mrikinfo table.
(long_options): Add "mri".
(show_usage): Mention -M/--mri.
(main): Call process_init after processing arguments. Handle -M.
* doc/gasp.texi: Document -M/--mri.
* gasp.c: Include ansidecl.h. Make all local functions static.
formatting, tack emacs control vars at end
2005-03-03 02:27:10 +01:00
Add prototypes for all static functions.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
(mri): New global variable.
(sb_add_char): Change parameter c from char to int.
(sb_add_string): Make parameter s into a const pointer.
(sb_add_buffer): Likewise.
(checkconst): Change parameter op from char to int.
(exp_get_abs): Make parameter emsg into a const pointer.
(do_res): Change parameter type from char to int.
(buffer_and_nest): Make parameters from and to into const
pointers.
(do_sdata): Change parameter type from char to int.
(new_file): Make parameter name into a const pointer.
(do_define): Make parameter string into a const pointer.
* config/tc-h8300.c (md_number_to_chars): Don't do it here, call
number_to_chars_bigendian.
* config/tc-h8300.h (TARGET_BYTES_BIG_ENDIAN): Define.
Fri Aug 11 13:23:56 1995 Michael Meissner <meissner@cygnus.com>
* write.h (struct fix): Add new field fx_no_overflow.
* write.c (fixup_segment): If fx_no_overflow is non-zero, don't
complain if the addend is too large.
* config/tc-ppc.c (md_assemble): Set fx_no_overflow if the half
word relocations BFD_RELOC_{LO16,HI16,HI16_S}.
Thu Aug 10 20:56:38 1995 Ken Raeburn <raeburn@cygnus.com>
* read.c (s_mri_sect) [BFD_ASSEMBLER]: Fix typos in choosing and
setting section flags.
Thu Aug 10 00:38:11 1995 Ian Lance Taylor <ian@cygnus.com>
* doc/as.texinfo: Add documentation for MRI compatibility mode.
* doc/as.1: Likewise.
* config/tc-m68k.c (m68k_ip): When recognizing '#', use isbyte and
iword rather than expr8 and expr16. When recognizing 'M', use
issbyte rather than expr8. When recognizing 'Q' and 't', just
check for O_constant rather than using expr8.
* config/m68k-parse.h (expr8, expr16): Don't define.
* Makefile.in (m68k-parse.o): Depend upon m68k-parse.h, not
m68k-parse.y.
* read.c (potable): Add spc, ttl, xcom, xref.
(s_mri_sect): New function.
* read.h (s_mri_sect): Declare.
* config/obj-coff.c (obj_coff_section) (both versions): In MRI
mode, call s_mri_sect.
(obj_pseudo_table): Add sect.s and section.s. Move sect outside
of ifndef BFD_ASSEMBLER.
* config/obj-elf.c (elf_pseudo_table): Add section.s, sect,
sect.s.
(obj_elf_section): In MRI mode, call s_mri_sect.
* config/tc-m68k.c (md_pseudo_table): Add restore, save.
(struct save_opts): Define.
(save_stack): New static variable.
(s_save, s_restore): New static functions.
* read.c (s_set): Remove unused local ptr.
(hex_float): Check target_big_endian.
(equals): Remove unused local p.
* config/tc-a29k.h (TARGET_BYTES_BIG_ENDIAN): Define.
* config/tc-h8500.h (TARGET_BYTES_BIG_ENDIAN): Define.
* config/tc-hppa.h (TARGET_BYTES_BIG_ENDIAN): Define.
* config/tc-i860.h (TARGET_BYTES_BIG_ENDIAN): Define.
* config/tc-m68k.h (TARGET_BYTES_BIG_ENDIAN): Define.
* config/tc-m88k.h (TARGET_BYTES_BIG_ENDIAN): Define.
* config/tc-tahoe.h (TARGET_BYTES_BIG_ENDIAN): Define.
* config/tc-sh.c (little): Set target_big_endian.
(md_begin): Likewise.
(md_parse_option): Likewise.
(build_relax): Check target_big_endian rather than shl.
(build_Mytes, md_atof): Likewise.
(md_convert_frag, md_apply_fix): Likewise.
(md_number_to_chars): Likewise.
Wed Aug 9 10:51:48 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-m68k.c (m68k_abspcadd): New static variable.
(m68k_quick): New static variable.
(m68k_rel32): New static variable.
(md_pseudo_table): Add opt and reg.
(m68k_ip): Permit absolute symbols in 'l'/'L' recognition. Check
m68k_quick in 'M' and 'Q' recognition. Check m68k_abspcadd in
DISP handling. Check m68k_rel32 in BASE/POST/PRE handling.
(md_begin): In MRI mode, initialize m68k_abspcadd and m68k_rel32.
In MRI mode, change unsized branch aliases to be variable sized.
(struct opt_action): Define.
(opt_table): Define.
(s_opt): New static function.
(skip_to_comma): New static function.
(opt_chip): New static function.
(opt_list): New static function.
(opt_list_symbols): New static function.
(s_reg): New static function.
* as.h (flag_keep_locals): Change from unsigned char to int.
(flag_no_warnings): Likewise.
* read.c (mri_line_label): Make non-static.
(potable): Add nopage, page, plen.
(s_org): Error if in MRI mode.
* read.h (mri_line_label): Declare.
* listing.c (listing_nopage): New function.
* listing.h (listing_nopage): Declare.
* symbols.c (symbol_begin): Set sy_frag of abs_symbol to
&zero_address_frag.
* write.c (adjust_reloc_syms): Check that symbol is not NULL
before checking sy_mri_common.
(fixup_segment): Likewise.
* config/obj-coff.c (fixup_segment): Likewise.
* read.c (abs_section_offset): New global variable.
(potable): Add offset, struct.
(do_org): New static function; handle changing the origin in the
absolute section.
(s_org): Use do_org.
(s_set): Likewise.
(equals): Likewise.
(s_space): In absolute_section, just increase abs_section_offset.
(s_struct): New function.
(emit_expr): Handle absolute_section specially.
* read.h (abs_section_offset): Declare.
(s_struct): Declare.
* frags.c (frag_more): Warn if in absolute_section.
(frag_now_fix): In absolute_section, return abs_section_offset.
* subsegs.c (subseg_change): If switching to absolute_section,
just set now_seg and now_subseg.
(subseg_set_rest): Special handling when switching to or from
absolute_section.
* config/tc-m68k.c (m68k_float_copnum): New static variable.
(md_pseudo_table): Add fopt and mask2.
(m68k_ip): Use m68k_float_copnum, not COPNUM, when setting
coprocessor register to use. In case 'I' when checking operands,
correct coprocessor register numbers. In case 'I' when setting
operands, don't add 1.
(s_fopt): New static function.
* config/m68k-parse.h (COPNUM): Don't define.
* read.c (potable): Add ifeq, ifge, ifgt, ifle, iflt, ifne.
Change if to pass O_ne to s_if.
(read_a_source_file): Don't define an label without a colon if
ignore_input returns true.
* cond.c (s_if): Treat argument as an operatorT describing how to
compare the argument against zero.
(ignore_input): Don't require an initial dot in MRI mode, or if
NO_PSEUDO_DOT is defined.
* read.c (potable): Add dcb, dcb.b, dcb.d, dcb.l, dcb.s, dcb.w,
dcb.x, ds.d, ds.p, ds.s, ds.x, elsec, endc, fail, format, llen,
noformat.
(read_a_source_file): If pseudo-op handler is s_end, quit
immediately.
(s_end): New function.
(s_fail): New function.
(s_float_space): New function.
(hex_float): New static function.
(float_cons): Use hex_float.
* read.h (s_fail): Declare.
(s_float_space): Declare.
* cond.c (s_end): Remove.
* listing.c (listing_psize): Treat argument as indicating whether
a height is expected.
* read.c (mri_pending_align): New static variable.
(read_a_source_file): Handle mri_pending_align.
(cons): Set mri_pending_align if appropriate.
* configure.in: Move random special target handling before
possible break.
* configure: Rebuild.
Tue Aug 8 23:41:25 1995 Alan Modra <alan@spri.levels.unisa.edu.au>
* configure.in: Consistently use ${target_cpu_type} rather than
${cpu_type} after the loop.
* configure: Rebuild.
* Makefile.in (targ-cpu.o): Use @target_cpu_type@ rather than
@cpu_type@.
Tue Aug 8 17:27:17 1995 Ken Raeburn <raeburn@cygnus.com>
* expr.h (operatorT): Remove comma after last enumerator value.
* config/obj-vms.c: Some whitespace cleanup from Pat Rankin.
* as.h (alloca): If __STDC__, declare void* instead of char*.
Wed Aug 2 18:54:37 1995 Pat Rankin <rankin@eql.caltech.edu>
* config/obj-vms.c (Flush_VMS_Object_Record_Buffer,
Close_VMS_Object_File): Reorganize the `#if !VMS' cross-assmebler
support code.
(Close_VMS_Object_File): Call Set_VMS_Object_File_Record to flush
output buffer--just in case--before closing the file.
Tue Aug 8 13:07:05 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-m68k.c (archs): Add 68ec000, 68hc000, 68hc001,
68ec020, 68ec030, 68ec040, and 68330.
(md_pseudo_table): Add chip and comline.
(m68k_init_after_args): Use strcasecmp when comparing default_cpu
against architectures.
(mri_chip, s_chip): New static functions.
* struc-symbol.h (struct symbol): Add sy_mri_common bit.
* read.h (mri_comon_symbol): Declare.
(s_mri_common): Declare.
* read.c (mri_line_label): New static variable.
(mri_common_symbol): New global variable.
(potable): Add "common" and "common.s".
(read_a_source_file): In MRI mode, set mri_line_label for a label
at the start of a line.
(s_mri_common): New function.
(s_space): Handle mri_common_symbol.
* symbols.c (colon): Change return value from void to symbolS *,
and return new symbol. If mri_common_symbol is set, attach the
new symbol to it.
(resolve_symbol_value): Handle an sy_mri_common symbol.
* symbols.h (colon): Change return value in declaration.
* subsegs.c (subseg_set_rest): Clear mri_common_symbol.
(subseg_set (both versions)): Likewise.
* frags.c (frag_more): Warn if mri_common_symbol is not NULL.
* write.c (adjust_reloc_syms): Skip sy_mri_common symbols.
(write_object_file): Discard sy_mri_common symbols.
(fixup_segment): Change relocations against sy_mri_common symbols
to be against the common symbol itself.
* config/obj-coff.c (yank_symbols): Discard sy_mri_common symbols.
(fixup_segment): Change relocations against sy_mri_common symbols
to be against the common symbol itself.
* config/obj-aout.c (obj_crawl_symbol_chain): Discard
sy_mri_common symbols.
* doc/c-m68k.texi: Add documentation for CPU specific options, and
for Motorola syntax.
* config/m68k-parse.y (motorola_operand): For (%pc), set mode to
DISP, not BASE.
Tue Aug 8 02:31:38 1995 Ken Raeburn <raeburn@cygnus.com>
* write.c (relax_align): Add extra padding for linkrelax only if
LINKER_RELAXING_SHRINKS_ONLY is defined.
* config/tc-i960.h (LINKER_RELAXING_SHRINKS_ONLY): Define it.
* doc/internals.texi (Relaxation): Write up some stuff on linker
relaxing and LINKER_RELAXING_SHRINKS_ONLY.
Mon Aug 7 17:18:10 1995 Ian Lance Taylor <ian@cygnus.com>
* config/m68k-parse.y: New file: bison grammar for m68k operands,
including support for Motorola syntax.
* config/m68k-parse.h: New file; definitions shared between
m68k-parse.y and tc-m68k.c.
* config/tc-m68k.c: Include m68k-parse.h.
(enum operand_type): Move to m68k-parse.h, where it is named
m68k_operand_type. Rename all uses. Rearrange somewhat. Add
FPREG. Rename AOFF to DISP. Rename AINDX to BASE. Rename APODX
to POST. Rename APRDX to PRE. Remove AMIND. Rename MSCR to
CONTROL. Remove DINDR.
(struct m68k_exp): Move to m68k-parse.h. Remove e_beg, e_end and
e_seg fields. Rename e_exp to exp. Rename e_siz to size, and
change type to enum m68k_size. Change all uses.
(enum _register): Move to m68k-parse.h, where it is named
m68k_register. Rename all uses. Add ZDATA0-7 and ZADDR0-7.
(struct m68k_op): Move to m68k-parse.h. Change all fields.
(seg): Don't define.
(add_exp): Remove.
(FAIL, OK): Remove.
(m68k_reg_parse): Move to m68k-parse.y, and rewrite.
(SKIP_WHITE, SKIP_W): Remove.
(try_moto_index, try_index): Remove.
(m68k_ip_op): Move to m68k-parse.y, and rewrite to use grammar.
(main): Remove obsolete test function.
(m68k_ip): Extensive changes to use new grammar.
(get_regs): Remove.
(crack_operand): m68k_ip_op now returns 0 on success.
(init_table): Add ssp, zd0-7 and za0-7.
(md_assemble): Make er const. Correct loop over operands when
looking for error message.
(md_begin): Set alt_notend_table for '(' and '@'.
(get_num): Expression is already parsed. Don't set seg.
* configure.in: If cpu_type is m68k, put m68k-parse.o in
extra-objects.
* configure: Rebuild.
* Makefile.in (DISTSTUFF): Add m68k-parse.c.
(BISON): Use ../bison/bison if it exists.
(BISONFLAGS): Define as empty.
(TARG_CPU_DEP_m68k): Depend upon $(srcdir)/config/m68k-parse.h.
(m68k-parse.c, m68k-parse.o): New targets.
Mon Aug 7 02:54:20 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-sh.c (parse_reg): Handle new FP registers.
(get_specific): Handle new operand types.
Fri Aug 4 12:29:21 1995 Ian Lance Taylor <ian@cygnus.com>
* expr.c (op_encoding): Make non-const. Don't set '"' to
formatting, tack emacs control vars at end
2005-03-03 02:27:10 +01:00
O_bit_not.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
(expr_begin): Set op_encoding['"'] in MRI mode.
Wed Aug 2 18:39:43 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-m68k.c: Remove BREAK_UP_BIG_DECL stuff.
(struct m68k_incant): Change m_operands field to be const.
(struct m68k_it): Change args field to be const.
(m68k_ip): Change local variable s to be const.
(opcode_ptr): Remove.
(md_begin): Use m68k_numopcodes, not numopcodes. Use
m68k_opcodes, not removed opcode_ptr. Use m68k_numaliases, not
numaliases.
Tue Aug 1 17:35:26 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-m68k.c (init_table): Add "control", "status", "iaddr",
"sfcr", and "dfcr" as synonyms for existing entries.
(md_begin): In MRI mode, force flag_reg_prefix_optional to 1.
(md_parse_option): Removed unused locals i and arch. Change type
of arch (another one) to unsigned long.
(tc_coff_sizemachdep): Add return after abort to avoid warning.
Initial support for MRI style labels and expressions.
* as.h (flag_mri): Declare/define.
* as.c (show_usage): Mention -M and its synonym --mri.
(parse_args): Add 'M' to std_shortopts. Add "mri" to
std_longopts. Set flag_mri if -M is seen.
(main): Call parse_args before input_scrub_begin. Call
expr_begin.
* app.c (do_scrub_begin): Don't set lex for '"' or '\'' in MRI
mode. Do set lex for ';', '*', and '!' in MRI mode.
(do_scrub_next_char): Remove MRI ifdef in LEX_IS_WHITESPACE case.
In MRI mode, keep spaces between labels and colons. Remove MRI
ifndef around LEX_IS_ONECHAR_QUOTE case. In MRI mode, don't use
'!' or '*' as comment characters even if they are in
comment_chars.
* read.h (lex_type): No longer const.
* read.c: Include libiberty.h.
(lex_type): No longer const.
(read_begin): In MRI mode, set lex_type of '?' to 3.
(potable): Add dc, dc.b, dc.d, dc.l, dc.s, dc.w, dc.x, ds, ds.b,
ds.l, ds.w, and xdef.
(read_a_source_file): Change LABELS_WITHOUT_COLON ifdef to check
for MRI mode at runtime rather than compile time. Handle the EQU
pseudo-op in MRI mode. Remove bogus MRI ifdef around done_pseudo.
Change NO_PSEUDO_DOT ifdef to also take effect for MRI mode at
runtime.
(cons): In MRI mode, always call parse_mri_cons rather than
TC_PARSE_CONS_EXPRESSION.
(parse_mri_cons): Always compile, not just when MRI is defined.
Call TC_PARSE_CONS_EXPRESSION, not expression, when the input is
not a string constant. Handle A and E modifiers.
(float_cons): Accept :xxxx, where the x's are hex digits.
* expr.h (operatorT): Add O_eq, O_ne, O_lt, O_le, O_ge, O_gt.
(expr_begin): Declare.
* expr.c (integer_constant): In MRI mode, if the base was not
specified, look for a suffix on the number to set the base.
(mri_char_constant): New static function.
(operand): Remove MRI ifdef. In MRI mode, do various things: Pass
0 as the base when calling integer_constant if there was no
prefix. Check for a hex constant suffix if when a leading '0' is
seen. Don't accept 0x or 0b as a prefix. Check for E'chars' and
A'chars'. Handle MRI character constants. Treat '"' as the
unary bitwise not operator. Treat $ as the program counter, or as
the prefix for a hex constant. Treat % as the prefix for a binary
constant and @ as the prefix for an octal constant. Treat : as
the prefix for a hex constant.
(op_encoding): Set '"' to O_bit_not, '<' to O_lt, and '>' to O_gt.
(op_rank): No longer const. Change rank values.
(expr_begin): New function.
(operator): New static function.
(expr): Use operator. Don't bother to mention the operator in
warnings. Remove bogus #if 0 code. Handle new operatorT values.
* atof-generic.c (atof_generic): In MRI mode, accept underscores
around the exponent in floating point numbers.
* symbols.h (symbols_case_sensitive): Declare.
* symbols.c (symbols_case_sensitive): New global variable.
(symbol_create): Check symbols_case_sensitive.
(symbol_find_base): Likewise.
(resolve_symbol_value): Handle new operatorT values.
(print_expr_1): Likewise.
(S_IS_LOCAL): In MRI mode, names beginning with two '?' characters
are local.
Tue Aug 1 11:35:18 1995 steve chamberlain <sac@slash.cygnus.com>
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-sh.c (md_convert_frag): Make some error messages
more explict.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Mon Jul 31 21:40:47 1995 Ken Raeburn <raeburn@cygnus.com>
Sat Jul 29 18:55:23 1995 Pat Rankin <rankin@eql.caltech.edu>
* config/obj-vms.c (COPY_SHORT, COPY_LONG, PUT_SHORT, PUT_LONG):
Make expansion be safe for use in expressions.
(PUT_COUNTED_STRING): Bracket expansion with `do {...} while (0)'
rather than just `{...}'.
Mon Jul 31 18:19:26 1995 steve chamberlain <sac@slash.cygnus.com>
* gasp.c (main): Parse -I option.
(do_include): Look through include list.
* gasp.c (change_base): Don't modify numbers in strings.
Mon Jul 31 12:16:21 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-ppc.h (SUB_SEGMENT_ALIGN): Define. From Niclas
Andersson <nican@ida.liu.se>.
Thu Jul 27 20:47:12 1995 Ken Raeburn <raeburn@cygnus.com>
* config/obj-coff.c (fixup_segment): Don't do further pcrel
processing after converting difference of two symbols in the
same segment. From Jim Wilson.
* configure.in (i386-*-linuxoldld): Add as synonym for
i386-*-linux*aout*. From Fred Fish.
* configure: Regenerated.
Thu Jul 27 16:14:56 1995 Pat Rankin <rankin@eql.caltech.edu>
* config/obj-vms.c (enum ps_type {ps_TEXT,ps_DATA,ps_COMMON,
ps_CONST}): New constants.
(VMS_Psect_Spec): Use them instead of literal strings.
(vms_write_object_file, global_symbol_directory): Adjust callers.
Wed Jul 26 18:31:35 1995 Pat Rankin <rankin@eql.caltech.edu>
* config/obj-vms.c (const_flag): Change from char to unsigned char.
* config/obj-vms.h (const_flag): Ditto.
(struct nlist): Replace union n_un and n_un.{n_name,n_next,n_strx}
fields with just n_name; delete field n_value; change n_other from
char to unsigned char and n_desc from short to int; insert explicit
padding for alignment.
Mon Jul 24 20:06:17 1995 Ken Raeburn <raeburn@cygnus.com>
* subsegs.h (struct seg_info_trash): Make bitfield types valid.
* config/obj-coff.c (fixup_segment): Local add_number should not
be declared register since its address is taken for
MD_APPLY_FIX3.
Fri Jul 21 15:28:18 1995 Pat Rankin <rankin@eql.caltech.edu>
Split huge vms_write_object_file routine into managable pieces.
* config/obj-vms.c (vms_fixup_text_section, synthesize_data_segment,
vms_fixup_data_section, global_symbol_directory, local_symbols_DST,
vms_build_DST): New routines.
(vms_write_object_file): Call them.
(struct vms_obj_state): New file scope variable used by the above.
Mon Jul 24 14:10:24 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-sh.c (md_pseudo_table): Add "uses".
(s_uses): New static function.
(sh_coff_frob_file): New function.
(md_convert_frag): Call subseg_change before calling fix_new.
(sh_handle_align): New function.
(SWITCH_TABLE): Define.
(sh_force_relocation): New function.
(md_apply_fix): Handle R_SH_USES, R_SH_COUNT and R_SH_ALIGN.
(sh_coff_reloc_mangle): Likewise. Also handle switch table
entries.
* config/tc-sh.h (HANDLE_ALIGN): Define.
(sh_handle_align): Declare.
(TC_FORCE_RELOCATION): Define.
(sh_force_relocation): Declare.
(TC_COUNT_RELOC): Simplify; rely on TC_FORCE_RELOCATION instead.
(tc_frob_file): Define.
(sh_coff_frob_file): Declare.
* config/obj-coff.c (write_object_file): Call tc_frob_file if it
is defined.
(fixup_mdeps): Call HANDLE_ALIGN if it is defined.
(TC_FORCE_RELOCATION): Define if not defined.
(fixup_segment): Use TC_FORCE_RELOCATION to decide whether to
clear the symbol fields of fixP.
Fri Jul 21 22:38:00 1995 Michael Meissner <meissner@cygnus.com>
* config/tc-ppc.c (ppc_elf_suffix): Add support for R_PPC_SDAREL
relocation.
(md_apply_fix3): Ditto.
Thu Jul 20 13:00:56 1995 Ken Raeburn <raeburn@cygnus.com>
* config/tc-m68k.c (md_convert_frag): Rename argument seg to sec,
since seg is a macro name in this file.
* configure.in (arm-*-riscix*): Don't set emulation.
Wed Jul 19 16:08:29 1995 Doug Evans <dje@canuck.cygnus.com>
* config/obj-coff.h (TE_PE): Delete.
* config/tc-arm.h (BYTE_ORDER): Delete.
(TARGET_FORMAT): Provide value for OBJ_COFF and TE_PE.
(ARM_BI_ENDIAN): Define if OBJ_COFF and TE_PE.
* config/tc-arm.c (byte_order): Delete.
(md_number_to_chars): Reference target_big_endian, not byte_order.
(md_chars_to_number): Likewise.
(md_longopts): Add -EB/-EL if ARM_BI_ENDIAN.
(md_parse_options): Recognize -EB/-EL.
(md_show_usage): List -EB/-EL.
Wed Jul 19 11:49:25 1995 Ian Lance Taylor <ian@cygnus.com>
* gasp.c (process_assigns): Use toupper before comparing against
upper case letter.
(whatcond): Likewise.
* config/tc-sh.c (sh_relax): Rename from relax, and make global.
Renamed all uses.
(insert): Pass a size of 2, not 4.
(build_relax): Remove unused len variable.
(md_show_usage): Mention -little option.
(md_convert_frag): Add segT argument. Rewrite to generate relocs
rather than to generate complete instructions here.
(md_apply_fix): Adjust and clarify R_SH_PCRELIMM8BY4 case for
changes in insert and md_pcrel_from. Add cases for R_SH_PCDISP
and R_SH_PCDISP8BY2.
(md_pcrel_from): Don't subtract 1, add 2.
(tc_coff_fix2rtype): Remove.
(sh_coff_reloc_mangle): New function.
* config/tc-sh.h (TC_COFF_FIX2RTYPE): Just return fx_r_type.
(sh_relax): Declare.
(TC_COUNT_RELOC): If relaxing, count PC relative relocs.
(TC_RELOC_MANGLE): Define.
(sh_coff_reloc_mangle): Declare.
(tc_coff_sizemachdep): Declare.
* tc.h (md_convert_frag): Add segT parameter to non BFD_ASSEMBLER
declaration.
* write.c (cvt_frag_to_fill): Add sec argument to non
BFD_ASSEMBLER version. Pass it to md_convert_frag.
(write_object_file): Pass SEG_TEXT to cvs_frag_to_fill.
* config/obj-coff.c (do_relocs_for): Pass segment info to
TC_RELOC_MANGLE.
(fixup_mdeps): Pass segment type to md_convert_frag.
* config/tc-a29k.c (md_convert_frag): Add segT argument.
* config/tc-h8300.c (md_convert_frag): Likewise.
* config/tc-h8500.c (md_convert_frag): Likewise.
* config/tc-i386.c (md_convert_frag): Likewise.
* config/tc-i860.c (md_convert_frag): Likewise.
* config/tc-i960.c (md_convert_frag): Likewise.
* config/tc-m68k.c (md_convert_frag): Likewise.
* config/tc-m88k.h (md_convert_frag): Likewise.
* config/tc-ns32k.c (md_convert_frag): Likewise.
* config/tc-tahoe.c (md_convert_frag): Likewise.
* config/tc-vax.c (md_convert_frag): Likewise.
* config/tc-w65.c (md_convert_frag): Likewise.
* config/tc-z8k.c (md_convert_frag): Likewise.
* config/tc-h8300.h (TC_RELOC_MANGLE): Add segment argument.
* config/tc-h8500.h (TC_RELOC_MANGLE): Likewise.
* config/tc-w65.h (TC_RELOC_MANGLE): Likewise.
* config/tc-z8k.h (TC_RELOC_MANGLE): Likewise.
Mon Jul 17 15:02:54 1995 Pat Rankin <rankin@eql.caltech.edu>
* config/obj-vms.c (Current_Routine, Text_Psect): Delete as file
scope variables.
(Define_Routine, Define_Local_Symbols): Take Current_Routine and
Text_Psect as arguments.
(VMS_DBG_Define_Routine): Delete.
(VMS_TBT_Block_End): Change `Size' argument from int to valueT.
(vms_write_object_file: text and data fixup loops): Difference
of two symbols has type offsetT rather than int; convert with
md_number_to_chars before passing to VMS_Store_Immediate_Data.
(vms_write_object_file: debug symbol loop): Call Define_Routine
instead of VMS_DBG_Define_Routine.
Sat Jul 15 00:01:35 1995 Michael Meissner <meissner@cygnus.com>
* config/tc-ppc.c (ppc_elf_suffix): Add @fixup so that the
compiler can mark which relocs not to complain about with
-mrelocatable.
(ppc_elf_validate_fix): Add .fixup to sections not to complain
about, and also don't complain for BFD_RELOC_CTOR relocations in
writable non-code segments.
(md_apply_fix): Treat BFD_RELOC_CTOR just like BFD_RELOC_32.
Fri Jul 14 19:54:28 1995 Ian Lance Taylor <ian@cygnus.com>
Add support for SPARC SunOS PIC:
* config/tc-sparc.h (sparc_pic_code): Always declare, not just
when OBJ_ELF.
(TC_RELOC_RTSYM_LOC_FIXUP): Define when OBJ_AOUT.
(tc_fix_adjustable): New definition for OBJ_AOUT.
* config/tc-sparc.c (sparc_pic_code): Always define, not just when
OBJ_ELF.
(md_apply_fix): Adjust reloc addend for OBJ_AOUT and PIC. In
BFD_RELOC_32_PCREL_S2 case, don't increment val for an external
symbol when PIC.
(tc_gen_reloc): Generate different PIC relocs when OBJ_AOUT, as
well as when OBJ_ELF.
(md_shortopts): If OBJ_AOUT, include `k'.
(md_parse_option): If OBJ_AOUT, handle 'k'.
(md_show_usage): Mention -k if OBJ_AOUT, and -KPIC if OBJ_ELF.
(md_pcrel_from): Don't add in size for an external symbol when
PIC.
Thu Jul 13 21:16:43 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.h (UNDEFINED_DIFFERENCE_OK): Define for SOM.
* write.c (adjust_reloc_syms): Set sy_used_in_reloc for both
symbols in a fixup where a defined symbol is subtracted from an
undefined symbol (when UNDEFINED_DIFFERENCE_OK is defined).
(fixup_segment): Do nothing for the difference of two symbols if
UNDEFINED_DIFFERENCE_OK is defined.
Wed Jul 12 23:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
* config/obj-coff.c (fixup_segment): Support MD_APPLY_FIX3.
Wed Jul 12 01:12:12 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
* write.c (fix_new): Use int, not short int, for argument type.
(fix_new_exp): Ditto.
* configure.in (arm-*-riscix*): Don't set emulations.
* config/tc-mips.c (NO_ECOFF_DEBUGGING): Define if ECOFF_DEBUGGING
wasn't previously defined.
(s_extern): Don't set ecoff_extern_size if NO_ECOFF_DEBUGGING.
(nopic_need_relax): Don't check it if NO_ECOFF_DEBUGGING.
(macro_build) [!USE_STDARG]: Don't use variadic prototype.
(mips_local_label) [NO_ECOFF_DEBUGGING]: Don't preserve potential
ECOFF debugging symbols.
* emul.h (struct emulation): Use unsigned, not unsigned char, for
bitfields.
* obj.h (struct format_ops): Likewise.
* config/tc-arm.c (symbol_make_empty) [BFD_ASSEMBLER]: Set
udata.p, not udata.
Tue Jul 11 14:30:19 1995 Ian Lance Taylor <ian@cygnus.com>
* doc/c-mips.texi: Document -m4010 and -mno-4010.
Tue Jul 11 14:28:55 1995 Jeff Spiegel <jeffs@lsil.com>
* config/tc-mips.c (mips_4010): New static variable.
(interlocks): New static variable.
(md_begin): Check for a cpu of "r4010". Set mips_4010 correctly.
If mips_4650 or mips_4010, set interlocks.
(append_insn): Check interlocks, not mips_4650.
(mips_emit_delays): Likewise.
(mips_ip): Only permit INSN_4010 instructions if mips_4010.
(md_longopts): Add "m4010" and "no-m4010".
(md_parse_option): Accept -mcpu=r4010. Handle -m4010 and
-no-m4010.
(md_show_usage): Document -m4010 and -no-m4010.
Tue Jul 11 13:22:50 1995 Ian Lance Taylor <ian@cygnus.com>
* ecoff.c (struct efdr): Add new field fake.
(init_file): Initialize fake.
(add_file): Add new parameter fake. Change all callers.
(ecoff_build_debug): Don't warn about a missing .end for a fake
file.
Mon Jul 10 16:01:31 1995 Ken Raeburn <raeburn@cygnus.com>
* doc/as.texinfo: Split out most cpu chapters...
* doc/c-*.texi: ...to here.
* read.c (po_hash): Now static.
Mon Jul 10 13:47:22 1995 Ian Lance Taylor <ian@cygnus.com>
Based on patches from H.J. Lu <hjl@nynexst.com>:
* config/tc-i386.c (md_apply_fix3): Rename from md_apply_fix1.
Accept pointer to value and segment. Fix OBJ_ELF PCREL case to
handle global defined symbols correctly.
(md_apply_fix): Remove both versions.
* config/tc-i386.h (MD_APPLY_FIX3): Define.
* configure.in: When switching on ${cpu}, use ${cpu}, not
$[target_cpu}, in default case.
* configure: Rebuild.
Sat Jul 8 13:27:55 1995 Ian Lance Taylor <ian@cygnus.com>
* write.c (fixup_segment): Call resolve_symbol_value on
sub_symbolP, in case it isn't in the symbol table.
Fri Jul 7 11:17:27 1995 Ian Lance Taylor <ian@cygnus.com>
* read.c (s_lcomm): For .lcomm 1, set align to 0, not 1.
* config/obj-coff.c (coff_frob_symbol): If SF_GET_FUNCTION, set
BSF_FUNCTION.
(symbol_globalP, symbol_global_lastP): New global variables.
(yank_symbols): Sort defined global symbols to the end, just
before the undefined symbols.
(glue_symbols): Add two arguments, and use them instead of
referring directly to global variables.
(crawl_symbols): Call glue_symbols twice, once for defined globals
and once for undefined. Add corresponding know calls.
* app.c (do_scrub_next_char): Always accept \v. Don't make it
conditional on BACKSLASH_V.
* read.c (next_char_of_string): Likewise.
* config/obj-bout.h (BACKSLASH_V): Don't define.
* config/tc-mips.h (BACKSLASH_V): Don't define.
Add SPARC ELF PIC support.
* write.c (fixup_segment): Pass fixP to TC_RELOC_RTSYM_LOC_FIXUP,
not fixP->fx_r_type.
* config/tc-sparc.c (sparc_pic_code): New global variable.
(md_apply_fix): If generating PIC, adjust fx_addnumber for any non
PC relative reloc.
(tc_gen_reloc): If generating PIC, adjust various reloc types.
Remove fx_pcrel assert, since it is no longer true.
(md_parse_option): Handle -K PIC.
* config/tc-sparc.h (sparc_pic_code): Declare if OBJ_ELF.
(TC_RELOC_RTSYM_LOC_FIXUP): Define if OBJ_ELF.
(tc_fix_adjustable): Don't adjust PC relative relocs if PIC.
* config/tc-i386.h (TC_RELOC_RTSYM_LOC_FIXUP): Take a fixp, not a
reloc type.
* Makefile.in (Makefile): Add dependency on conf.in, so that conf
is rebuilt when conf.in changes.
Thu Jul 6 16:49:38 1995 Ken Raeburn <raeburn@cygnus.com>
* All files: Updated FSF address.
Thu Jul 6 16:30:34 1995 Jim Wilson <wilson@chestnut.cygnus.com>
* ecoff.c (add_file): Don't collapse multiple .file commands into
a single file structure.
(ecoff_build_lineno): Set ilineBase to sum of previous file's
ilineBase and cline.
Thu Jul 6 12:54:27 1995 Ian Lance Taylor <ian@cygnus.com>
Patches from Jerry Blakely <gerry_blakley@wellfleet.com>:
* as.c (listing_filename): New static variable.
(show_usage): Mention -a=file.
(parse_args): Support = option of -a to set name of listing file.
(main): Pass listing_filename to listing_print.
* listing.c (list_file): New static variable.
(various): Replace printf with fprintf to list_file.
(listing_print): If name argument is not NULL, open it as
list_file.
* doc/as.texinfo, doc/as.1: Document -a=file.
* config/tc-sparc.c (s_reserve): Don't permit redefinition, even
if the symbol was already in bss_section. Fix warning message.
* listing.c (struct file_info_struct): Rename end_pending field to
at_end.
(file_info): Initialize at_end, not end_pending.
(buffer_line): If at_end set, just return immediately. Don't
worry about end_pending cases. Set at_end when EOF is read.
(print_source): Check at_end, not end_pending.
(listing_listing): Likewise.
* config/tc-alpha.h (alpha_do_align): Don't declare.
(md_do_align): Don't define.
(tc_frob_label): Define.
(alpha_define_label): Declare.
(md_flush_pending_output): Define.
(alpha_flush_pending_output): Declare.
* config/tc-alpha.c (insn_label): New static variable.
(auto_align): New static variable.
(md_pseudo_table): Add cases for .text, .data, .align, .byte,
.hword, .int, .long, .octa, .quad, .short, .word, .double, .float,
and .single. Change .t_floating, .s_floating, .f_floating,
.g_floating, and .d_floating to use s_alpha_float_cons rather than
float_cons.
(s_alpha_text, s_alpha_data): New static functions.
(s_rdata, s_sdata): Clear insn_label and set auto_align.
(s_gprel32): If auto_align, align. Clear insn_label.
(emit_insn): Clear insn_label.
(s_alpha_align): New static function.
(alpha_align): Make static. Take label argument.
(alpha_flush_pending_output): New static function.
(s_alpha_cons, s_alpha_float_cons): New static functions.
(alpha_define_label): New function.
Wed Jul 5 22:49:31 1995 Ken Raeburn <raeburn@cygnus.com>
* conf.in: Regenerate with autoreconf.
Mon Jul 3 19:47:53 1995 Pat Rankin (rankin@eql.caltech.edu)
* config/obj-vms.h (vms_resolve_symbol_redef): Use full prototype.
(vms_check_for_special_label, tc_frob_label): Move them to group
with other prototypes.
[WANT_VMS_OBJ_DEFS]: Only define the many OBJ_x, DBG_x, and DST_x
macros when this is defined.
* config/obj-vms.c: Fully prototype all local functions.
[symbolS, fragS]: Use consistently instead of their struct tags.
[WANT_VMS_OBJ_DEFS]: Define this.
(s_const): Make definition correctly match actual usage.
(VMS_stab_parse): Make `expected_type' arg be int rather than char.
(get_VMS_time_on_unix): Define as `static void'.
(hash_string): Make definition match actual usage; argument is
`char const *' rather than `unsigned char *'.
(VMS_Case_Hack_Symbol, VMS_Modify_Psect_Attributes, VMS_Psect_Spec,
VMS_Global_Symbol_Spec): Declare string args as `const char *'.
[IS_GXX_VTABLE]: New macro.
(vms_write_object_file: GSD loop): Use it.
(vms_write_object_file: data segment): Reorganize `fill' loop.
Wed Jul 5 12:01:49 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-sparc.c (md_shortopts): Add "K:" if OBJ_ELF.
(md_parse_option): If OBJ_ELF, check for -K. Die if -K PIC, since
PIC code is not currently supported.
* as.c (parse_args): Change std_shortopts to be an array rather
than a constant string. Only include 'K' if WORKING_DOT_WORD is
not defined. Only check for 'K' in that case as well.
* as.h (flag_warn_displacement): Only declare if WORKING_DOT_WORD
is not defined.
* conf.in: Add undef of HAVE_SBRK.
* config/obj-coff.c (obj_coff_line): Call listing_source_line, in
both BFD_ASSEMBLER and non BFD_ASSEMBLER versions of the function.
* symbols.c (S_SET_EXTERNAL): Warn if symbol is weak.
(S_CLEAR_EXTERNAL): Likewise.
(S_SET_WEAK): Warn if symbol is global.
* config/obj-aout.c (obj_aout_frob_symbol): Warn about an attempt
to put an undefined symbol into a set.
* Makefile.in: Remove @configure_input@; it's not needed in
files named Makefile.
* config/tc-m88k.c (md_pseudo_table): Add ".set" so that the
explicit pseudo-op works, while continuing to treat "set" as an
instruction.
* ecoff.c (ecoff_debugging_seen): New global variable.
(ecoff_directive_def): Set ecoff_debugging_seen.
(ecoff_stab): Likewise.
* ecoff.h: Make idempotent.
(ecoff_debugging_seen): Declare.
* config/tc-mips.c: Include ecoff.h.
(mips_debug): New static variable.
(s_stringer, s_mips_space): Remove unneeded declarations.
(md_parse_option): In case 'g', set mips_debug to debugging level.
(mips_local_label): New function.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-mips.h (LOCAL_LABEL): Call mips_local_label.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
(mips_local_label): Declare.
Wed Jul 5 00:59:22 1995 Fred Fish (fnf@cygnus.com)
* as.c (main): Only use sbrk when HAVE_SBRK defined.
* configure.in: Add test for sbrk.
* configure: Regenerate using autoconf 2.4.
Mon Jul 3 15:58:16 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.h (MAX_RELOC_EXPANSION): Bump to 6.
* config/tc-hppa.c (tc_gen_reloc, SOM version): Handle
relocations for the difference of two (possibly external)
symbols.
(hppa_fix_adjustable): For SOM, reject reductions involving
the difference of two symbols.
(hppa_force_relocation): Force relocations for expressions
involving the difference of two symbols.
Mon Jul 3 14:22:59 1995 Steve Chamberlain <sac@slash.cygnus.com>
* configure[.in] (i386-*-win32): New host and target.
Thu Jun 29 17:25:43 1995 Steve Chamberlain <sac@slash.cygnus.com>
Support for long filenames non-bfd coff.
* config/obj-coff.c (filename_list_head, filename_list_tail): New.
(yank_symbols): Notice and record filenames which are too long.
(w_strings): Write out filename strings.
(c_dot_file_symbols): Put long filenames onto list.
Wed Jun 28 17:33:13 1995 Steve Chamberlain <sac@slash.cygnus.com>
* config/obj-coff.c (fixup_segment): PE doesn't use
the strange common symbol format that other 386s formats
do.
* config/tc-i386.c (md_begin): If LEX_AT defined then
'@' is in the set of identifiers.
(i386_operand): If LEX_AT, then don't look for @goto stuff.
* config/te-pe.h: Define LEX_AT.
Wed Jun 28 17:49:59 1995 Ken Raeburn <raeburn@cygnus.com>
* doc/as.texinfo (H8/500 Floating Point): Indicate that IEEE FP
numbers are for the standard emulation code.
(SH Floating Point): Ditto.
(Overview): Describe new --emulation option for MIPS.
* doc/*.m4: Deleted.
Thu Jun 22 19:26:25 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
Sun May 7 11:53:41 MDT 1995 Bryan Ford <baford@cs.utah.edu>
* configure.in: Added i386-*-moss* target.
Thu Jun 22 14:41:23 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* write.c (write_object_file): Cast decode_local_label_name
argument to char * to avoid warning.
Wed Jun 21 18:07:59 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
Changes from Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>:
* config/tc-m68k.c (insword): Increment the frag offsets.
(struct m68k_it): Add reloc[].pcrel_fix field to hold pc-rel
fixup.
(add_fix): Accept additional parameter, the pc-rel fixup. All
callers changed. Fix offset address if width == 'b'.
(m68k_ip) [case AINDX]: Allow explicit size spec. Don't make the
outer displacement pc-relative.
(md_pcrel_from): Make it relative to the first extension word of
the operand.
(opcode_ptr): Make it a macro if DO_BREAK_UP_BIG_DECL is
undefined.
(md_convert_frag_1): Don't reference fragP->fr_opcode[2..].
(md_estimate_size_before_relax) [case TAB (FBRANCH, SZ_UNDEF)]:
Turn on long bit.
(m68k_ip) [case 'C']: Don't set set long bit, set it in the opcode
formatting, tack emacs control vars at end
2005-03-03 02:27:10 +01:00
table.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
(md_estimate_size_before_relax) [case TAB (PCINDEX, SZ_UNDEF)]:
Variable part increases by four, not six.
* write.c (fixup_segment) [TC_M68K]: Don't do further pcrel
processing after converting difference of two symbols in the
same segment.
* write.c (fixup_segment): Don't conditionalize the pcrel fix on
TC_M68K.
* config/tc-sparc.c (sparc_ip, case 'A'): If ASI is not a "#"
value, don't shift it an extra time.
Wed Jun 21 14:18:37 1995 Steve Chamberlain <sac@slash.cygnus.com>
* gasp.c (do_print, do_form, buffer_and_nest): Use case insensitive
string compares.
Tue Jun 20 14:55:02 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/obj-coff.c (write_object_file): Cast time() argument to
time_t *.
Tue Jun 20 12:00:53 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_build_unwind_subspace): Fix typo in last
change.
Mon Jun 19 15:27:17 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_build_unwind_subspace): Zero out memory
from frag_more calls.
Thu Jun 15 16:53:37 1995 Stan Shebs <shebs@andros.cygnus.com>
* config/obj-coff.c: Don't use "bfd/" when including libbfd.h
and libcoff.h.
(fill_section): Call PROGRESS.
* Makefile.in (INCLUDES): Add bfd srcdir.
* mpw-config.in: Add bfd_gas flag and set for each config.
(i386-unknown-go32, m68k-unknown-coff): Recognize.
* mpw-make.in (HACK_O_RAMA, OBJ_COFF_OMIT_TIMESTAMP): Add to
config.h.
Thu Jun 15 10:04:26 1995 Doug Evans <dje@canuck.cygnus.com>
* config/tc-arm.h (LOCAL_LABEL): Prepend '.' if not OBJ_AOUT.
(FAKE_LABEL_NAME): Likewise.
Mon Jun 12 22:25:39 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_ip): Check for invalid register in single
precision fmpyadd and fmpysub instructions.
Thu Jun 8 19:33:02 1995 Pat Rankin (rankin@eql.caltech.edu)
* config/obj-vms.c (myname): Delete all references.
(VMS_stab_parse, Write_VMS_MHD_Records, VMS_Case_Hack_Symbol):
Replace printf calls with as_tsktsk.
(PUT_LONG, PUT_SHORT): Use COPY_LONG, COPY_SHORT.
(VMS_Store_Immediate_Data): Move second buffer capacity check
below bottom of loop; first check at top suffices for loop itself.
(find_file): Remove redundant pointer checks in first two loops;
replace third loop with pointer to last list element determined
in first loop.
Tue Jun 6 13:53:06 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/tc-sparc.c (sparc_ip): Handle defined absolute symbols as
ASI values.
* config/obj-vms.c (vms_write_object_file, case N_DATA): Use
strcmp against FAKE_LABEL_NAME instead of checking third
character. (Suggested by Pat Rankin.)
Mon Jun 5 20:10:46 1995 Pat Rankin (rankin@eql.caltech.edu)
Add support for N_ABS and N_ABS|N_EXT type symbols.
* config/obj-vms.h (LSY_S_M_{DEF,REL}, ENV_S_M_{DEF,NESTED}):
New macros for local symbols (from <lsydef.h> and <envdef.h>).
* config/obj-vms.c (Current_Environment): New file-scope variable.
(VMS_Local_Environment_Setup): New routine.
(GBLSYM_LCL): New macro.
(VMS_Global_Symbol_Spec): Handle local symbols too.
(VMS_Psect_Spec): Set GLOBALVALUE_BIT for absolute symbols.
(VMS_Emit_Globalvalues): Handle local and global absolute symbols.
(VMS_Store_PIC_Symbol_Reference): Ditto.
(vms_write_object_file: GSD symbol loop): Ditto.
Mon Jun 5 16:10:40 1995 Steve Chamberlain <sac@slash.cygnus.com>
* config/tc-arm.h (LOCAL_LABELS_FB): Define.
Mon Jun 5 02:17:58 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
* configure.in (i386-*-gnu*): Always use GNU ELF config.
Wed May 31 17:49:18 1995 Pat Rankin (rankin@eql.caltech.edu)
* config/obj-vms.c (obj_crawl_symbol_chain): Update *symbolPP
in `else' clause when removing a symbol. Also, revise comments
to match the code.
(vms_write_object_file (GSD symbol loop, case N_DATA)): Never
output symbol definitions for local numeric labels.
Tue May 30 18:29:10 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
* configure.in (architecture variants, cases armeb and arm*): Remove
spaces round assignment to endian.
Tue May 30 12:31:31 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* write.c (write_object_file): Check for undefined local dollar
and fb labels.
* symbols.c (decode_local_label_name): Extract instance number
from the correct location.
Sat May 27 21:28:49 1995 J.T. Conklin <jtc@rtl.cygnus.com>
* config/te-dpx2.h: Include obj-format.h.
(COFF_MAGIC): Renamed from FILE_HEADER_MAGIC.
Wed May 24 13:45:32 1995 Steve Chamberlain <sac@slash.cygnus.com>
* configure, configure.in, config/obj-coff.c, config/obj-coff.h:
Add support for ARM pe
Tue May 23 17:00:32 1995 Doug Evans <dje@canuck.cygnus.com>
* config/tc-sparc.c (tc_gen_reloc): Handle BFD_RELOC_SPARC_WDISP16
and BFD_RELOC_SPARC_WDISP19.
Tue May 23 19:18:33 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* as.c (parse_args) [! USE_EMULATIONS]: Always print an error
message.
* doc/internals.texi: Document obj_app_file and
TARGET_BYTES_BIG_ENDIAN.
Mon May 22 20:03:23 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* ecoff.c (ecoff_stab): Add extra leading argument, for 4 May
change.
* ecoff.h (ecoff_stab): Fix declaration.
* obj.h (format_ops.process_stab): Include prototype.
* config/obj-elf.h (OBJ_PROCESS_STAB): Pass through seg argument.
* config/obj-ecoff.h (OBJ_PROCESS_STAB): Ditto.
* config/e-mipself.c (mipself): New emulation mode, doesn't change
endianness from configured default.
* config/e-mipsecoff.c (mipsecoff): Ditto.
* configure.in (mips ecoff/elf targets): Include them.
* as.c (mipself, mipsecoff): Declare.
* as.c (emulation_name): New variable.
(select_emulation_mode): Set emulation_name. Don't change argv.
(parse_args): Handle --emulation; complain if the supplied name
isn't what select_emulation_name came up with.
Sun May 21 21:36:17 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c: Reverse changes from Dec. 19th which
changed the way unwinds were built for ELF. Rely on relocation
symbol reductions to avoid placing the end of function marker
symbols into the object file's symbol table.
Sat May 20 12:31:36 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
Added improved VMS support from Pat Rankin:
Fri 19 May 16:51:40 1995 Pat Rankin (rankin@eql.caltech.edu)
* config/obj-vms.h (AOUT_STABS): Define.
* config/obj-vms.c (fpush, rpush): New routines.
(push): Replaced by the above.
(find_symbol): Slight reorganization to expose tail recursion.
Fri Mar 17 18:40:36 1995 Pat Rankin (rankin@eql.caltech.edu)
* Makefile.in (VMS_OTHER_OBJS): delete this.
* vmsconf.sh (make-gas.com): build ../libiberty/liberty.olb
first if necessary; link gas against it.
Fri May 19 16:37:39 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
* gasp.c (istrue): Correctly test for string inequality.
Thu May 18 04:25:11 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
* config/tc-arm.c (CP_T_{Pre,UD,WB}): Define, bits in co-processor
instructions.
([ls]fm_flags): Correct error in bitmasks.
(cp_address_required_here): Delete second parameter, FLAGS. All
callers changed. Remove all dead code referring to FLAGS. If
address is just "[Reg]" then convert into a PRE-INCREMENT UP format.
(do_fp_ldmstm): Handle full-descending and empty-ascending stack
formats explicitly.
* config/tc-arm.c (internalError): Define.
(ARM_{1,2,250,3,6,7,7DM,ANY,2UP,ALL,3UP,6UP,LONGMUL}): Define processor
variants.
(FPU_{CORE,FPA10,FPA11,NONE,ALL,MEMMULTI}): Define floating point
variants.
({CPU,FPU}_DEFAULT): Define.
(cpu_variant): New variable.
(asm_flg): Change more_flags to flag_bits.
Add prototypes for new functions.
(FLAG_{S,P,B,T,ED,FD,FA,EA,IB,IA,DB,DA,L}): Delete.
(s_flag[], ldst_flags[], byte_flag[], cmp_flags[], ldm_flags[],
stm_flags[], lfm_flags[], sfm_flags[], round_flags[], except_flags[],
cplong_flag[]): New variables.
(asm_opcode, insns[]): New format, add version support.
(arm_flg_hsh): Delete.
(do_mul, do_mla): Remove "Warning" from warning messages.
(do_arit): Simplify.
(do_swap): Make error message more appropriate.
(md_begin): Build hash tables starting at first entry in tables.
(md_number_to_chars): Cope with big/little-endian selection.
(md_chars_to_number): New function.
(md_apply_fix): Rewrite to make endian independent.
(tc_gen_reloc): Better error messages.
(md_assemble): Reject opcodes forbidden by the currently selected cpu
variant. Rewrite handling code for instruction flags.
(md_shortopts): Add option "m:".
(md_parse_option): Get the desired cpu/fpu variant.
From: David Taylor (dtaylor@armltd.co.uk)
* configure.in (architecture variants): Check for "armeb" and "arm*",
set endianness accordingly.
* read.c (read_a_source_file): New hooks md_start_line_hook and
md_after_pass_hook.
* config/arm-{big,lit}.mt: New files
* config/tc-arm.h ({LITTLE,BIG}_ENDIAN, BYTE_ORDER): Define.
(TARGET_FORMAT): Select depending on endianness and emulation and
object format.
(md_after_pass_hook, md_start_line_hook): Define.
* config/tc-arm.c: Include subsegs.h, symbols.h and listing.h.
(shift[]): Add uppper case equivalents.
(CP_T_[XY], TRANS_BIT): Define.
(conds[]): Delete initial NULL entry, add "lo" entry as synonym for
"cc".
(LONGEST_FLAG, flags[]): Delete.
(arm_psr): New structure.
(psrs[]): New variable.
(PSR_ALL): Define.
(LONGEST_INST): Bump to 5.
(LITERAL_MASK, COND_MASK, OPCODE_MASK, DATA_OP_SHIFT): Define.
(OPCODE_{AND,EOR,SUB,RSB,ADD,ADC,SBC,RSC,TST,TEQ,CMP,CMN,ORR,MOV,BIC,
MVN}): Define.
(insns[]): Add smull, umull, smlal, umlal, ldfm, stfm, msr and mrs
instructions. Add nop and adr pseudo ops.
(reg_table): Add APCS register name variants.
(arm_psr_hsh): New hash table.
(md_pseudo_table): Add "ltorg", "pool", "extend", "ldouble" and
"packed".
(MAX_LITERAL_POOL_SIZE): Define.
(struct literalS): New structure.
(literals, next_literal_pool_place, lit_pool_num, current_poolP): New
variables.
(add_to_lit_pool, symbol_locate, symbol_make_empty): New functions.
(validate_immediate): Return FAIL on failure.
(s_ltorg): New function.
(psr_required_here, psrf_required_here): New functions.
(cp_address_required_here): New parameter, flag, all callers changed.
If flag is non-zero, restrict the legal addressing modes.
(do_nop, do_mrs, do_msr, do_mull): New functions.
(negate_data_op): New function.
(data_op2): accept #x,y meaning x rotated right by y, but only when
suitable constants. If immediate is not legal, try changing the
opcode.
(do_adr): New function.
(do_ldst): accept "ldr reg, =expr". Put expr in the pool if it can't
be done as an immediate.
(do_fp_ldst): Use CP_T_[XY], not immediate values.
(do_fp_ldmstm): New function.
(arm_psr_parse): New function.
(output_inst): Use INSN_SIZE in call to md_number_to_chars.
(md_assemble): Add hack so that "Label instruction" causes alignment of
the label.
(arm_after_pass_hook, arm_start_line_hook, arm_frob_symbol): New
functions.
Wed May 17 05:25:16 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-ppc.c (md_show_usage): Add \'s at end of lines in
strings for non-GCC compilers.
Tue May 16 19:36:00 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/obj-ecoff.c (ecoff_pop_insert): New function.
(ecoff_format_ops): Use it.
(obj_ecoff_frob_symbol): Now static.
Wed May 17 00:59:12 1995 Andrew Cagney - aka Noid <cagney@highland.com.au>
* config/tc-ppc.c (md_begin): Was assuming that an instruction was
bigendian and hence 16bit relocs withing instructions would
ALWAYS be at addresses i+2-i+3. In LE mode it is i+0-i+1.
Tue May 16 16:29:58 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/obj-multi.h (obj_frob_symbol, obj_frob_file, S_GET_SIZE,
S_SET_SIZE, S_GET_ALIGN, S_SET_ALIGN, obj_copy_symbol_attributes,
OBJ_PROCESS_STAB): New macros.
* config/tc-mips.c: Protect against redefining them also when
including obj-elf.h. Test only OBJ_ELF for including elf/mips.h.
(mips_init_after_args): New function. Set byte_order here.
(md_parse_option): Not here.
(byte_order): Don't bother initializing.
* config/tc-mips.h (mips_init_after_args): Declare.
(tc_init_after_args): New macro.
* read.c (s_lcomm): Do ELF/ECOFF test at run time, not compile
time.
Fri May 12 14:17:47 1995 Steve Chamberlain <sac@slash.cygnus.com>
Initial support for PE object files.
* configure.in, configure (i386-*-pe, i386-*-*nt): Add.
* config/obj-coff.c (fixup_segment): Cope with PE wierdness.
* config/obj-coff.h (TE_PE): New target format.
Thu May 11 14:58:21 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/obj-elf.c (NEED_ECOFF_DEBUG): Define if ECOFF_DEBUGGING
was defined by header files. Test in preprocessor conditionals
instead of ECOFF_DEBUGGING.
(ecoff_debug_pseudo_table): Make empty if NEED_ECOFF_DEBUG is not
defined.
(obj_read_begin_hook, obj_symbol_new_hook, elf_frob_symbol,
elf_frob_file): Only call ecoff routines if NEED_ECOFF_DEBUG is
defined.
(elf_ecoff_set_ext, elf_get_extr, elf_set_index): Define only if
NEED_ECOFF_DEBUG is defined.
(elf_format_ops): Reference elf_ecoff_set_ext only if
NEED_ECOFF_DEBUG.
Wed May 10 18:09:12 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* Makefile.in (OBJS): Include @extra_objects@.
(obj-elf.o, obj-ecoff.o, e-mipself.o, e-mipsecoff.o): New rules
for building these independently.
* emul-target.h, config/e-mipself.c, config/e-mipsecoff.c: New
files.
* acconfig.h (DEFAULT_EMULATION, EMULATIONS, USE_EMULATIONS,
OBJ_MAYBE_*, I386COFF, M68KCOFF, M88KCOFF): New macros.
* aclocal.m4 (GAS_UNIQ): New macro.
* as.c (emulations, n_emulations) [USE_EMULATIONS]: New variable.
(select_emulation_mode, default_emul_bfd_name, common_emul_init)
[USE_EMULATIONS]: New functions.
(main) [USE_EMULATIONS]: Call select_emulation_mode before other
initialization.
* emul.h: New file.
* as.h [USE_EMULATIONS]: Include it.
* configure.in: Handle enable-targets option. Iterate over target
list, building up a list of object file formats and emulation
configurations. (Only supports emulations for MIPS CPU so far.)
If multiple formats are needed, set obj_format to multi and add
format config files to extra_files. If emulation modes are
needed, add the relevant files to extra_files.
* configure.in: Define I386COFF, M68KCOFF, M88KCOFF for those
configurations.
* ecoff.c (ecoff_generate_asm_lineno): Filename argument now
points to const.
* ecoff.h (ecoff_generate_asm_lineno): Updated declaration.
* obj.h (obj_read_begin_hook): Don't declare function if it's
already a macro.
* read.c (s_space, cons, stringer): If md_flush_pending_output is
defined, call it on entry.
* config/obj-elf.c (obj_elf_section): If md_flush_pending_output
is defined, call it on entry. If md_elf_section_change_hook is
defined, call it before returning normally.
* read.h (target_big_endian): Declare.
* obj.h (struct format_ops): Added new function pointer fields
ecoff_set_ext, read_begin_hook, symbol_new_hook.
(ecoff_format_ops, elf_format_ops): Declare.
* config/obj-elf.c (elf_s_get_size, elf_s_set_size,
elf_s_get_align, elf_s_set_align, elf_copy_symbol_attributes,
elf_sec_sym_ok_for_reloc): New functions.
(elf_format_ops): New variable.
(elf_frob_symbol): Now takes additional int* argument.
* config/obj-elf.h (elf_frob_symbol): Update declaration.
(elf_pop_insert): Declare.
(obj_pop_insert): Define to call elf_pop_insert.
* config/obj-ecoff.c (ecoff_sec_sym_ok_for_reloc,
obj_ecoff_frob_symbol): New functions.
(ecoff_format_ops): New variable.
* config/te-generic.h: If OBJ_HEADER is defined, use it as the
filename to include in place of obj-format.h.
* config/te-multi.h: New file, copied from te-generic.h.
* config/obj-elf.c (OBJ_HEADER): Define it to "obj-elf.h".
* config/obj-ecoff.c (OBJ_HEADER): Define it to "obj-ecoff.h".
* config/obj-elf.c (ECOFF_DEBUGGING): Default to 0.
(obj_read_begin_hook, obj_symbol_new_hook, elf_frob_symbol,
elf_frob_file): Test it at run time.
(obj_ecoff_set_ext, elf_get_extr, elf_set_index): Define
unconditionally.
(elf_pseudo_table): Renamed from obj_pseudo_table, now static.
(ecoff_debug_pseudo_table): Split off into separate table. Define
it unconditionally.
(elf_pop_insert): New function.
* config/obj-elf.h (elf_pop_insert): Declare.
(obj_pop_insert): New macro.
(obj_ecoff_set_ext) [!OBJ_MAYBE_ELF]: Define to elf_ecoff_set_ext.
* config/obj-ecoff.h (obj_ecoff_set_ext): Define to ecoff_set_ext.
* config/tc-mips.h: Protect against multiple inclusions.
(mips_pop_insert): Declare.
(md_pop_insert): Call it.
* config/tc-mips.c: If OBJ_MAYBE_ELF is defined, include
obj-elf.h, but preserve OUTPUT_FLAVOR and protect some other
macros from redefinition.
(ECOFF_DEBUGGING): Default to 0. All references changed to
run-time tests or made unconditional.
(s_stringer, s_mips_space, s_elf_section): Deleted.
(md_pseudo_table): Don't refer to them. Split table into three
sections, for MIPS, non-ECOFF_DEBUGGING, and ELF.
(mips_pop_insert): New function.
(mips_flush_pending_output): New function.
(mips_enable_auto_align): New function.
* config/tc-mips.h (mips_pop_insert): Declare.
(md_pop_insert): New macro.
(mips_flush_pending_output): Declare.
(md_flush_pending_output): New macro.
(mips_enable_auto_align): Declare.
(md_elf_section_change_hook): New macro, calls
mips_enable_auto_align.
Tue May 9 17:07:41 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* configure.in: Add little endian PowerPC support.
* configure: Rebuild with autoconf.
* config/ppc-big.mt: New file for big endian PowerPC systems.
* config/ppc-lit.mt: New file for little endian PowerPC systems.
* config/tc-ppc.h (target_big_endian): Declare.
(TARGET_FORMAT): Deal with little and big endian ELF variants.
(TARGET_BYTES_BIG_ENDIAN): Define as 1, not empty.
* config/tc-ppc.c (ppc_big_endian): Delete variable, use
target_big_endian instead.
(md_parse_option): Parse -mlittle and -mlittle-endian to use
little endian support. Parse -mbig and -mbig-endian to use big
endian support.
(md_show_usage): Update to reflect current switches.
(ppc_set_cpu): Recognize powerpcle as little endian PowerPC. Use
as_fatal, not abort if unknown machine.
Tue May 9 10:58:41 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (md_apply_fix): Cast *valp to an integer when
comparing against signed values.
(hppa_force_relocation): Make "distance" an integer.
Tue May 9 00:47:03 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* obj.h (struct format_ops) [BFD_ASSEMBLER]: New type.
(this_format) [BFD_ASSEMBLER]: Declare new variable, if not
already defined as a macro.
Mon May 8 21:44:13 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* subsegs.h (seg_info): Provide dummy version for
non-BFD_ASSEMBLER, non-MANY_SEGMENTS configuration. It should
never get invoked, but this is easier than conditionalizing some
of the uses.
(struct seg_info_trash): Dummy type used by above to make code
compile.
Fri May 5 14:47:13 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/obj-coff.h (SEPARATE_STAB_SECTIONS): Define to 1, not
empty.
* config/obj-elf.h (SEPARATE_STAB_SECTIONS): Ditto.
* config/obj-som.h (SEPARATE_STAB_SECTIONS): Ditto.
Thu May 4 19:26:55 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* stabs.c (get_stab_string_offset): Always define. If
SEPARATE_STAB_SECTIONS isn't set, abort.
(SEPARATE_STAB_SECTIONS): Default to zero.
(aout_process_stab): New function, split out from s_stab_generic.
(OBJ_PROCESS_STAB) [AOUT_STABS]: Define to call aout_process_stab,
if not already defined.
(s_stab_generic): Test SEPARATE_STAB_SECTIONS at run time. If
it's not set, and OBJ_PROCESS_STAB isn't defined, abort. Always
pass six arguments to OBJ_PROCESS_STAB.
* read.h (get_stab_string_offset): Declare unconditionally.
* config/obj-aout.h (AOUT_STABS): Define.
* config/obj-bout.h (AOUT_STABS): Define.
* config/obj-ecoff.h (OBJ_PROCESS_STAB): Add new first argument,
ignored.
* config/obj-elf.h (OBJ_PROCESS_STAB) [ECOFF_DEBUGGING]: Ditto.
* config/obj-ecoff.h (ECOFF_DEBUGGING): Define to 1, not empty.
* config/obj-elf.h (ECOFF_DEBUGGING): Ditto. Test value, not
whether it's defined.
Wed May 3 21:38:20 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* as.h (LOCAL_LABELS_DOLLAR, LOCAL_LABELS_FB): If not already
defined, define them to zero.
* config/tc-*.h, config/te-*.h: If defining them, define them to
be 1 instead of empty.
* expr.c (integer_constant, operand): Test them at run time
instead of compile time.
* read.c (read_a_source_file): Ditto.
* symbols.c (colon): Ditto.
(dollar_*, define_dollar_label, fb_*): Define unconditionally.
* symbols.h (dollar_*, define_dollar_label, fb_*): Declare
unconditionally.
Wed May 3 13:08:53 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (md_apply_fix): Do nothing for an out of range
PC relative call since those only occur in cases where the linker
can fix them up.
(hppa_force_relocation): Force relocations for out of range PC
relative calls.
Tue May 2 16:34:47 1995 Jeff Law (law@snake.cs.utah.edu)
* configure (hppa*-*-lites*): Handle just like hppa*-*-*elf*.
* configure.in: Likewise.
Tue May 2 11:22:00 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* read.c (pop_insert): New function.
(pop_override_ok, pop_table_name): New variables.
(md_pop_insert, obj_pop_insert): New macros.
(pobegin): Use them.
* config/tc-mips.c: Use USE_STDARG and USE_VARARGS instead of
NO_STDARG &c.
* read.c (target_big_endian): If TARGET_BYTES_BIG_ENDIAN is
defined, initialize to 1.
* config/tc-mips.c (mips_target_format): Changed to a function,
checking flavor and byte order at run time.
(md_parse_option, cases OPTION_EB and OPTION_EL): Set
target_big_endian here.
(md_begin): Not here.
* config/tc-mips.h (mips_target_format): Adjust declaration.
(TARGET_FORMAT): Call mips_target_format.
* config/tc-mips.h (USE_GLOBAL_POINTER_OPT): Define in terms of
OUTPUT_FLAVOR.
* config/tc-mips.c (g_switch_value, g_switch_seen): Define
unconditionally.
(md_begin, mips_ip, md_parse_option, s_change_sec, s_option,
s_abicalls, nopic_need_relax): Check USE_GLOBAL_POINTER_OPT at run
time, instead of compiling conditionally on GPOPT.
(GPOPT): Don't define.
(md_shortopts): Always include -G.
(RDATA_SECTION_NAME): Select at run time.
(md_begin): Test for ELF format at run time instead of compile time.
(mips_ip, s_change_sec): Ditto.
(md_parse_option, cases OPTION_CALL_SHARED and OPTION_NON_SHARED):
Ditto.
(OPTION_CALL_SHARED, OPTION_NON_SHARED, mips_regmask_frag): Define
unconditionally.
Tue May 2 00:17:04 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* Makefile.in (TARG_CPU_DEP_*): New variables.
(targ-cpu.o): Depend on one, selected by autoconf substitution,
instead of TARG_CPU_DEPENDENTS.
* configure.in: Substitute $cpu_type, $obj_format, $atof, and
$emulation into Makefile.in.
* config/h8300.mt: Deleted.
* config/h8500.mt: Deleted.
* config/i386coff.mt (TARG_CPU_DEPENDENTS): Deleted.
* config/m68k.mt: Deleted.
* config/m68kcoff.mt (TARG_CPU_DEPENDENTS): Deleted.
* config/m88kcoff.mt (TARG_CPU_DEPENDENTS): Deleted.
* config/mips-big.mt (TARG_CPU_DEPENDENTS): Deleted.
* config/mips-lit.mt (TARG_CPU_DEPENDENTS): Deleted.
* config/sh.mt: Deleted.
* config/w65.mt: Deleted.
* config/z8k.mt: Deleted.
* config/te-dpx2.h (dpx2): Deleted unused macro.
* config/te-generic.h (TE_GENERIC): Ditto.
* config/te-go32.h (TE_GO32): Ditto.
* config/te-hp300.h (TE_HP300): Ditto.
* config/te-hppa.h (PA, _TE_PA_H): Ditto.
* config/te-ic960.h (TE_IC960): Ditto.
* config/te-nbsd532.h (TE_NETBSD532): Ditto.
* config/te-pc532mach.h (TE_PC532MACH): Ditto.
* config/te-ppcnw.h (TE_PPCNW): Ditto.
* config/te-sco386.h (scounix): Ditto.
Mon May 1 15:59:56 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* read.c (s_app_file): If obj_app_file is defined, call it with
string as argument. Don't call c_dot_file_symbol or
elf_file_symbol.
* config/obj-coff.h (obj_app_file): Define as c_dot_file_symbol.
* config/obj-elf.h (obj_app_file): Define as elf_file_symbol.
* as.h (OUTPUT_FLAVOR): Don't define here.
* config/obj-aout.h (OUTPUT_FLAVOR) [BFD_ASSEMBLER]: Define.
* config/obj-bout.h (OUTPUT_FLAVOR): Define.
* config/obj-coff.h (OUTPUT_FLAVOR) [BFD_ASSEMBLER]: Define.
* config/obj-ecoff.h (OUTPUT_FLAVOR): Define.
* config/obj-elf.h (OUTPUT_FLAVOR): Define.
Thu Apr 27 20:07:33 1995 Doug Evans <dje@canuck.cygnus.com>
* Makefile.in (RUNTEST): Use one in srcdir if present.
(RUNTESTFLAGS): Define.
Wed Apr 26 15:54:10 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
Support for more portable alignment handling in assembly code,
based on patches from Bryan Ford <baford@schirf.cs.utah.edu>:
* read.c (potable): Added balign and p2align, for aligning by
bytes or powers of two independent of what ".align" does for a
given target.
* doc/as.texinfo: Document them.
Tue Apr 25 11:12:04 1995 Rob Savoye <rob@thepub.cygnus.com>
* configure, configure.in: Look for m68k-*-vxworks* rather than
just m68k-wrs-vxworks so gas can be configured for
m68k-vxworks5.1.
Fri Apr 21 15:19:06 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/tc-sh.c (md_apply_fix): If fx_r_type is zero, handle
fx_size of 1, and abort on unrecognized sizes.
* config/tc-m68k.c (m68k_ip): Fix bug in last change regarding
non-isvar case.
Sun Apr 16 01:52:52 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
* config/tc-m68k.h (md_relax_table, TC_GENERIC_RELAX_TABLE):
Missed this one in 11 Apr changes.
* config/tc-i386.h (TC_GENERIC_RELAX_TABLE): Fix typo.
Thu Apr 13 18:18:08 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/tc-sh.c (md_convert_frag): Instead of aborting on large
displacements, print an error message. Don't invoke the code that
followed the abort call until it's been verified.
* config/tc-m68k.c (md_show_usage): Add 68060 to list. Split cpu
list into three lines.
Thu Apr 13 14:34:36 1995 Torbjorn Granlund <tege@adder.cygnus.com>
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.c (m68k_init_after_args): Test for m68360.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
(md_parse_option): Likewise.
(md_show_usage): Mention m68360.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.h (TARGET_WORD_SIZE): Define.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
(TARGET_ARCH): Define.
* expr.c (integer_constant): If TARGET_WORD_SIZE is defined,
sign-extend appropriately.
Thu Apr 13 11:20:17 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-ppc.c (ppc_elf_validate_fix): Properly use PARAMS to
hide prototype from non-ANSI compilers, and don't use ANSI syntax
for arguments.
Wed Apr 12 12:20:19 1995 Stan Shebs <shebs@andros.cygnus.com>
* mpw-config.in (TDEFINES): Put empty definition into
makefile fragment.
* mpw-make.in (xmalloc.c.o): Remove.
(as.new): Depend on Version.r.
(Version.r): Generate from version info.
* mpw-make.in: Delete references to hex-value.c.
* mpw-config.in: Add mapping from configs to object file formats,
get VERSION from Makefile.in and add to mk.tmp.
(mips-idt-ecoff) [TDEFINES]: Add TARGET_BYTES_BIG_ENDIAN.
* mpw-make.in (VERSION, gC): Don't define.
(ALL_CFLAGS): Remove -d flags.
(config.h): Remove definition of MPW, add HAVE_STDARG_H,
BFD_ASSEMBLER.
* mpw-make.in (ALL_CFLAGS): Add definition of HAVE_STDARG_H,
include of ::libiberty:.
(config.h): Ifdef contents on GAS_VERSION.
* mpw-make.in (as.c): Compile with C not gC.
(config-stamp): Touch correctly.
(install-only): New target.
(install): Depend on all and install-only.
* mpw-config.in: Parse target and use to generate forward includes
to tc-, obj-, and atof- files, use te-generic.h for emulation.
* mpw-make.in (VERSION): Define.
(as.c): Compile with GCC.
(TARG_OBJECTS, CLIBS): Define.
(as.new): Use LDFLAGS, TARG_OBJECTS, CLIBS and EXTRALIBS in link
command.
(config.h, config-stamp): Build.
* mpw-make.in (C, CFLAGS): Removed definitions.
(ALL_CFLAGS): Define.
Set default rule to use {CC} instead of {C}.
* mpw-make.in (install): Moved here from mpw-build.in.
* mpw-build.in: Removed, functionality in mpw-make.in
* mpw-make.in (CFLAGS): Add more include paths.
* mpw-config.in (varargs.h, sys/*.h): Don't create when
configuring.
* mpw-make.in (CFLAGS): Add -w flag.
* mpw-make.in: Replace 8-bit chars with their names.
* mpw-config.in: New file, MPW version of configure.in.
* mpw-make.in: New file, MPW version of Makefile.in.
Tue Apr 11 01:42:36 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* configure.in: Require at least autoconf 2.3, because earlier
versions lose on some AIX versions.
* configure: Regenerated.
* configure.in: Add m68k-*-elf.
* config/tc-m68k.c (comment_chars) [OBJ_ELF]: Include '#'.
(md_pseudo_table) [OBJ_ELF]: Ignore "swbeg".
(md_begin): Set alt_notend_table['&'], so svr4-style immediate
operands are accepted.
(md_apply_fix): Argument VALP should point to valueT.
(md_convert_frag): Argument SEC should be type segT.
(md_shortopts) [OBJ_ELF]: Accept 'Q' with an argument.
(md_parse_option): Ignore it.
(md_convert_frag_1): Add in frag address for the symbol in the
displacement calculation.
* config/tc-m68k.h (TARGET_FORMAT) [OBJ_ELF]: Use "elf32-m68k".
(TARGET_ARCH): Define.
(REGISTER_PREFIX_OPTIONAL) [OBJ_ELF]: Default to 0.
(LOCAL_LABEL, FAKE_LABEL_NAME, REGISTER_PREFIX_OPTIONAL): Handle
these the same way for OBJ_ELF as for M68KCOFF.
* gdbinit.in: Add breakpoint in as_abort.
* write.c (cvt_frag_to_fill): If offset is less than zero,
complain about it specifically, instead of reporting an assertion
failure.
(relax_segment): Complain about .org backwards, then ignore it.
Do generic rs_machine_dependent relaxation only if
TC_GENERIC_RELAX_TABLE is defined, and use its value for the base
of the table.
* tc.h (md_relax_table): Delete declaration.
* as.h (struct relax_type): Add forward declaration for type.
* config/tc-a29k.c: Deleted md_relax_table.
* config/tc-{alpha,arm,h8300,hppa,i860,m88k,mips,ppc,sparc,z8k}.c:
Ditto.
* config/tc-{h8500,i386,i960,ns32k,sh,tahoe,vax,w65}.h: Declare
md_relax_table here, and define TC_GENERIC_RELAX_TABLE to expand
to md_relax_table.
* config/tc-h8500.c (md_relax_table): No longer const.
* config/tc-w65.c (md_relax_table): Ditto.
* config/tc-sparc.c (md_short_jump_size, md_long_jump_size):
Deleted.
* doc/internals.texi: Describe TC_GENERIC_RELAX_TABLE and
WORKING_DOT_WORD. Mention md_*_jump_size (but description needs
to be fleshed out later). Note m68k PCINDEX mode has been checked
in.
Mon Apr 10 15:57:42 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/tc-mips.c (nopic_need_relax): New static function, split
out from md_estimate_size_before_relax.
(md_estimate_size_before_relax): Call it.
(load_address, macro): In NO_PIC branches, if nopic_need_relax
returns nonzero, don't attempt GP optimization.
* config/tc-m68k.c (PCINDEX): New macro.
(md_relax_table): No longer const. Add PCINDEX entries.
(m68k_ip): For AINDX with simple symbol operand, generate a
PCINDEX frag if PC is used, or do normal non-AINDX processing for
address register.
(m68k_init_after_args): If cpu is 68000 or 68010, fix
md_relax_table to prevent relaxation of PCINDEX/BYTE mode to
SHORT, since they don't support that mode.
(md_convert_frag_1, case PCLEA/LONG): Add 4 to offset, not 2. Add
support for new PCINDEX modes.
(md_estimate_size_before_relax): Process PCINDEX/SZ_UNDEF mode.
* config/tc-m68k.c (md_convert_frag_1, case PCLEA/SHORT): Add 2 to
offset.
(m68k_ip, case most punctuation/AOFF): If using PC, call add_frag
using PCLEA.
* config/tc-m68k.c: Don't explicitly include config.h. Deleted a
bunch of "#if 0" code and useless comments.
(struct m68k_cpu): New type.
(archs, n_archs): New variables, with single list of name/enum
mapping and aliases.
(m68k_ip): Delete the table here.
(m68k_init_after_args): Use the new table here instead of
open-coding it.
(md_parse_option, case 'm'): Ditto.
* doc/Makefile.in (Makefile): Fix rule for running config.status.
(internals.dvi, internals.ps, internals.ps4): New targets, not
built by default.
* doc/internals.texi: Add loud disclaimer. Refill to 79 columns,
specify fill-column in local-variables section. Change
subheadings to subsections so they can be cross-referenced.
Describe broken words, frags, frag chains, generic relaxation,
relax table, m68k relaxation, m68k addressing modes, test suite
code. Add a few words about various file formats.
* doc/as.texinfo (m68k): Recommend using `%' with registers as the
normal case, instead of the exceptional case.
Thu Mar 30 14:38:47 1995 H.J. Lu (hjl@nynexst.com)
* configure.in: Change linux to default to elf. Using
i[345]86-*-linuxaout will defaults to a.out.
* configure: Rebuild.
Wed Mar 29 17:16:30 1995 Torbjorn Granlund <tege@adder.cygnus.com>
* config/tc-m68k.c (md_apply_fix_2): Cast negative offsets to offsetT
(for hosting on 64 bit machines).
Tue Mar 21 16:53:27 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (md_show_usage): Mention -mips4 and -m4650.
Fri Mar 17 16:47:13 1995 Stan Shebs <shebs@andros.cygnus.com>
* write.c (write_object_file): Add PROGRESS macros.
Fri Mar 17 12:40:34 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_comm): Make sure to always reset the frag
and section for common symbols.
Thu Mar 16 17:26:18 1995 Michael Meissner <meissner@cygnus.com>
* config/tc-ppc.c (ppc_elf_validate_fix): Allow non PC relative
pointers in the .ctors and .dtors section also when using the
-mrelocatable option.
(md_parse_option): Support -m403 as a PowerPC computer.
(md_show_usage): Ditto.
Wed Mar 15 14:45:42 1995 Ian Lance Taylor <ian@cygnus.com>
* ecoff.c (ecoff_build_debug): The cur_scope field of a fil_ptr
may be NULL when given strange input. Don't core dump.
Tue Mar 14 21:36:34 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (load_register): Don't use addiu for dli of an
unsigned seemingly negative number. Don't bother shifting a zero
value.
(mips_ip): For case 'j', if there are more alternatives, and the
ISA level is at least 3, don't accept an unsigned seemingly
negative number.
Tue Mar 14 19:16:43 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* read.c (s_app_line): Fix last patch to deal with a line number
of 1.
Tue Mar 14 17:00:57 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-ppc.c (ppc_elf_validate_fix): Use as_warn_where, not
as_bad_where to give a warning instead of an error.
Mon Mar 13 17:03:46 1995 Pat Rankin (rankin@eql.caltech.edu)
* config/tc-vax.c (md_assemble): issue a warning if a constant
is used as an operand where an immediate value is not allowed.
Fri Mar 10 19:21:19 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/obj-coff.c: Redo my 10 Jan change, but get it right this
time. :-)
(fixup_segment): If linkrelax is set, just return.
(write_object_file): Don't treat h8300 and z8k specially with
regard to fixups.
* config/tc-h8300.c (md_begin): Set linkrelax.
* config/tc-z8k.c (md_begin): Ditto.
Thu Mar 9 18:01:37 1995 Ian Lance Taylor <ian@cygnus.com>
* config/obj-coff.c (coff_header_append): Check return value of
bfd_coff_swap_scnhdr_out.
Thu Mar 9 13:51:30 1995 Doug Evans <dje@canuck.cygnus.com>
Delete this patch, it breaks the h8300 assembler.
Tue Jan 10 13:34:14 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/obj-coff.c (write_object_file): Don't treat h8300 and z8k
specially with regard to fixups.
Thu Mar 9 12:28:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-ppc.c (mrelocatable): Change type to boolean.
(md_begin): Set the EF_PPC_RELOCATABLE if -mrelocatable.
Wed Mar 8 15:39:39 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (md_begin): Check for a cpu string of r8000 or
r10000. If mips_isa is 4, set the machine number to 8000.
(append_insn): If mips_isa is at least 4, don't generate nops for
coprocessor delays. Check INSN_READ_FPR_R when setting
mips_cprmask[1].
(mips_emit_delays): If mips_isa is at least 4, don't generate nops
for coprocessor delays.
(mips_ip): Check for INSN_ISA4 instructions. Handle new argument
types 'h', 'R', 'N', and 'M'.
(md_longopts): Accept "mips4".
(md_parse_option): Handle -mips4, and -mcpu=10000 and -mcpu=8000.
(s_mipsset): Permit .set mips4.
Wed Mar 8 09:36:05 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-ppc.c (ppc_elf_validate_fix): Allow .stab sections to
have non PC relative relocations with -mrelocatable.
Wed Mar 8 02:57:53 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/tc-m68k.c (opcode_ptr): Return pointer to const.
(md_begin): Make hash table errors fatal. Process opcode aliases
after main opcode table.
(md_apply_fix_2, case 4): Recode setting of lower_limit to avoid
gcc warning.
Tue Mar 7 16:07:10 1995 Ian Lance Taylor <ian@cygnus.com>
* doc/as.texinfo: Add documentation for SPARC V9, from Doug Evans
<dje@cygnus.com>.
Mon Mar 6 09:58:34 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c: Change all occurences of pa-89 with pa-11 to
be consistent with current naming conventions.
(md_begin): Set a default architecture and machine type.
(pa_ip): If the current instruction specifies a newer machine type
than the current machine type, then update the current machine
type.
(need_pa11_opcode): Likewise.
Sun Mar 5 19:38:09 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_ip, case 'z'): Don't lose argument
relocation bits for absolute calls.
Fri Mar 3 17:41:50 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/tc-h8300.* (md_operand): Change empty function to empty
macro.
* config/tc-h8300.c (build_bytes): Make H8/300-H warning message
clearer.
* write.c (write_contents): If bfd_set_section_contents fails,
print a message and exit, instead of aborting.
Fri Mar 3 16:26:19 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* tc.h (md_apply_fix3): If MD_APPLY_FIX3 is defined, declare
md_apply_fix3.
* write.c (fixup_segment): If MD_APPLY_FIX3 is defined, call
md_apply_fix3 with the normal 2 arguments and the current segment
pointer instead of md_apply_fix.
* config/tc-ppc.h (MD_APPLY_FIX3): Define.
* config/tc-ppc.c (ppc_elf_validate_fix): Warn if -mrelocatable
and a non PC relative relocation that isn't in the .got2 segment
was performed.
(md_apply_fix3): Rename from md_apply_fix and take segment pointer
as third argument. If ELF object format, call ppc_elf_validate_fix
for normal relocations.
(md_parse_option): If ELF object format, recognize the
-mrelocatable switch.
Thu Mar 2 16:34:44 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-i386.h (AOUT_MACHTYPE): Define as 100, not 0.
Tue Feb 28 18:29:27 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/tc-arm.c, config/tc-arm.h (md_operand): Replaced empty
function in .c file with empty macro in .h file.
* config/tc-h8500.*, config/tc-hppa.*, config/tc-i386.*,
config/tc-i860.*, config/tc-i960.*, config/tc-ns32k.*,
config/tc-ppc.*, config/tc-sh.*, config/tc-sparc.*,
config/tc-tahoe.*, config/tc-vax.*, config/tc-w65.*,
config/tc-z8k.*: Ditto.
* config/tc-m68k.*: Ditto.
* config/tc-m68k.c (mote_pseudo_table): Removed dots from opcode
names.
* read.c (s_app_line): Ignore non-positive line numbers.
Tue Feb 28 15:34:14 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-i386.c (tc_i386_fix_adjustable): Don't adjust PLT or
GOT relocs either.
Mon Feb 27 13:03:41 1995 Kung Hsu <kung@mexican.cygnus.com>
* configure.in: add a29k-*-vxworks configuration.
Fri Feb 24 14:41:15 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (load_register): Take dbl argument to determine
handling of signed 32 bit values in 64 bit modes. Change all
callers.
(macro): Handle M_DLI and M_DLA_AB.
Wed Feb 22 23:10:56 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (md_apply_fix): Don't subtract the value of the
add symbol if it's a common symbol (the value of a common symbol
is its size, not a value in the traditional sense).
Wed Feb 22 21:12:28 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (append_insn): If listing_prev_line is called,
call frag_grow to make sure there is still room for a variant.
Fri Feb 17 14:50:08 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (md_pseudo_table): Add 2byte, 4byte and 8byte
if OBJ_ELF. From gary@Intrepid.COM (Gary Funck).
* config/obj-elf.c (elf_frob_symbol): Warn if a symbol is both
weak and common.
* config/obj-aout.c (obj_aout_frob_symbol): Likewise.
Fri Feb 17 12:43:47 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-ppc.c (md_pseudo_table): Don't redefine byte under
ELF.
(ppc_elf_cons): Don't support @pcrel any more, since DIFF_EXPR_OK
allows the normal expressions to generate it.
(md_apply_fix): Convert BFD_RELOC_32 with pcrel bit set into
BFD_RELOC_32_PCREL. Abort if either BFD_RELOC_16 or BFD_RELOC_8
need PC relative relocations.
* config/tc-ppc.h (DIFF_EXPR_OK): Define to allow PC relative
expressions to be handled.
Thu Feb 16 14:30:13 1995 Doug Evans <dje@cygnus.com>
* expr.c (operand): Move md_operand handling to default case
(so it works).
Wed Feb 15 16:08:47 1995 Jason Molenda <crash@cygnus.com>
* config/tc-h8500.c (tc_coff_symbol_emit_hook): Add ignored
parameter, to match prototype.
Wed Feb 15 15:07:00 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-ppc.c (md_pseudo_table): If ELF, go to ppc_elf_cons
instead of cons.
(md_show_usage): Show all of the PowerPc options.
(ppc_elf_suffix): New function to recognize ELF suffixes that
specify a relocation, such as @GOT.
(ppc_elf_cons): Replacement for the standard cons function that
knows about the ELF suffixes.
(ppc_fixup): Add reloc field to hold non-standard relocation.
(md_assemble): Handle ELF suffixes like @GOT.
(md_create_short_jump): Dummy in case WORKING_DOT_WORD is not
defined.
(md_create_long_jump): Ditto.
(md_short_jump_size): Ditto.
(md_long_jump_size): Ditto.
(md_apply_fix): Handle BFD_RELOC_32_PCREL, BFD_RELOC_LO16,
BFD_RELOC_HI16, BFD_RELOC_HI16_S, BFD_RELOC_PPC_TOC16, and
BFD_RELOC_16 relocations. If relocation can not be found, print
the decimal value of the relocation.
Wed Feb 15 11:46:02 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (md_apply_fix): Accept BFD_RELOC_16, for
DWARF. From gary@Intrepid.COM (Gary Funck).
* config/tc-mips.c (macro): Handle M_U{L,S}D[_A] (unaligned double
loads and stores).
* config/tc-i386.c (tc_i386_fix_adjustable): Do adjust global
symbols if OBJ_AOUT.
* config/tc-mips.c (macro): Don't use the target register as a
base register when building the address for M_L{W,D}{L,R}_AB.
Mon Feb 13 14:44:32 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (KT0, KT1): Define.
(mips_ip): Recognize $kt0 and $kt1 as register names.
* config/tc-sparc.h (tc_fix_adjustable): Define if OBJ_ELF.
* config/tc-sparc.c (md_apply_fix): If OBJ_ELF, subtract out the
value of a defined symbol; the value was added in by
fixup_segment. This was previously corrected, if the reloc was
changed to be against a section symbol, in tc_gen_reloc.
Fri Feb 10 14:04:04 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-i386.c (tc_i386_fix_adjustable): Use S_IS_EXTERN
rather than !S_IS_LOCAL.
Thu Feb 9 18:16:34 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-i386.c (md_assemble): Adjust conditions for changing
BFD_RELOC_32 to BFD_RELOC_386_GOTPC to handle a switch in frags.
Patch originally from Rob Ryan <robr@cmu.edu>.
* config/tc-i386.c: Include subsegs.h.
(tc_i386_fix_adjustable): Declare return value.
(i386_operand): Don't use an assignment directly as a condition.
Thu Feb 9 10:37:13 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (md_apply_fix): In some cases subtract the
value of the add symbol from valp. Offsets braindamage in the
"machine independent" fixup_segment.
Wed Feb 8 18:51:23 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* messages.c (as_abort): New function.
* as.h (as_abort): Declare it.
(abort): New macro.
Thu Jan 19 18:10:05 1995 Pat Rankin (rankin@eql.caltech.edu)
* config/vms-conf.h (HAVE_UNISTD_H): define it unconditionally.
* config-gas.com: test for availability of <unistd.h>; create a
rudimentary one if necessary.
Tue Feb 7 13:34:46 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* configure.in: Add powerpc-*-eabi support, which is the same as
powerpc-*-elf.
(configure): Rebuild with autoconf.
Mon Feb 6 03:37:00 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
Changes from Bryan Ford <baford@schirf.cs.utah.edu> for i386
16-bit and msdos support:
* config/tc-i386.c (flag_16bit_code): New variable.
(set_16bit_code_flag): New function.
(md_pseudo_table): Added entries "code16" and "code32".
(md_assemble): Ensure that correct data-size prefixes get emitted,
based on the current mode. Ensure that 32-bit addressing will
always be done. Move segment-prefix handling code. (Why?) Use
16-bit jumps for 16-bit code, 32-bit jumps for 32-bit code.
* config/tc-i386.h (MAX_PREFIXES): Bump to 5.
(Data16, Data32): Define.
* doc/as.texinfo (i386-16bit): New node.
* configure.in (i386-*-msdos*): New target, using a.out format.
* configure: Regenerated.
Thu Feb 2 15:21:24 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/tc-m68k.c (cpu32_control_regs): New macro.
(m68k_init_after_args): Use it, for cpu32 processors.
Tue Jan 31 17:20:45 1995 Pat Rankin (rankin@eql.caltech.edu)
* config/obj-vms.c (vms_tir_stack_psect): new routine;
(VMS_Set_Data, VMS_Set_Psect, VMS_Store_PIC_Symbol_Reference,
VMS_TBT_Routine_Begin, VMS_TBT_Line_PC_Correlation): use it;
(VMS_Global_Symbol_Spec, VMS_Procedure_Entry_Pt): treat
Psect_Number as `unsigned'.
Thu Jan 26 17:06:28 1995 Pat Rankin (rankin@eql.caltech.edu)
* config/obj-vms.c: performance tuning.
(VMS_Symbol_type_list): convert from single list head to small
array of list heads;
(SYMTYP_HASH): new macro for accessing VMS_Symbol_type_list[];
(find_symbol, setup_basic_type, VMS_typedef_parse): use it;
(VMS_RSYM_Parse): move S_GET_VALUE() inside switch to avoid
calling it for uninteresting cases.
Wed Feb 1 23:52:45 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (md_apply_fix): Go ahead and call
hppa_field_adjust to get a new value for R_DATA_ONE_SYMBOL
relocations in SOM.
(hppa_fix_adjustable): Refine somewhat.
Fri Jan 27 21:29:53 1995 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-ppc.h (NO_STRING_ESCAPES): Don't define if we are
using ELF.
Thu Jan 26 19:03:42 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/tc-h8300.c (get_specific): Add parens around | inside &.
(skip_colonthing): Set L_8 if ":8" is specified.
Thu Jan 26 18:38:01 1995 Ian Lance Taylor <ian@cygnus.com>
* config/tc-ppc.c (md_begin): Permit mfdec to be duplicated on the
601. Check that the error return from hash_insert is "exists".
Thu Jan 26 11:35:33 1995 Michael Meissner <meissner@cygnus.com>
* configure: Add support for configuring powerpc-*-eabi.
* config/tc-ppc.c (GOT_symbol): Define if object format is ELF.
* config/tc-ppc.h (GLOBAL_OFFSET_TABLE_NAME): Define if object
format is ELF and not defined to be "_GLOBAL_OFFSET_TABLE_".
Wed Jan 25 16:23:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-sh.c (little): Add argument IGNORE to avoid
compiler warnings.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
(md_pseudo_table): Add space for consistent formatting.
(COND8_RANGE, COND12_RANGE): Delete unused macros.
(COND8_F, COND8_M, COND12_F, COND12_M, UNCOND12_F, UNCOND12_M):
Correct minimum and maximum branch offsets. Add comments explaining
why these numbers are correct.
Wed Jan 25 15:32:09 1995 David Edelsohn <edelsohn@mhpcc.edu>
* config/tc-ppc.c (md_parse_option): Accept mpwr2 as a synonym for
mpwrx; mppc32, m603, and m604 as synonyms for mppc; and mppc64 and
m620 for PowerPC64 mode.
(ppc_symbol_new_hook): Add T0 as synonym for TC0 suffix.
Tue Jan 24 16:44:23 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/tc-vax.c (vip): Introduce new ptr-to-const local variable
for scanning operand string.
Sat Jan 21 17:50:38 1995 Pat Rankin (rankin@eql.caltech.edu)
* config/vax-inst.h (struct vop, fields `vop_warn', `vop_error'):
make them pointers to const char;
(struct vit, field `vit_error'): ditto.
* config/atof-vax.c (md_atof): rename local `littlenum_pointer'
to `littlenumP' to avoid shadowing file scope variable.
* config/tc-vax.c (vip_begin, vip_op_defaults, vip_op_1): make
string arguments be pointers to const char;
(vip): make `alloperr' const char *;
(vip_op): make `err' and `wrn' const char *; rename `access' to
`access_mode' to avoid shadowing library function.
* config/obj-vms.c (`symbol_name'): make it const char *;
(get_struct_name): cast one use of `symbol_name' to char *
[caller guarantees that it won't modify the pointer's target];
(PUT_COUNTED_STRING): use pointer to const char;
(VMS_typedef_parse): make `pnt2' const char *;
(Write_VMS_MHD_Records): make `cp' const char *;
(VMS_Modify_Psect_Attributes, array `Attributes'): make const,
and make field `Name' pointer to const char;
* as.h (`seg_name[]' declaration): pointers to const char;
(struct _pseudo_type, field `poc_name'): pointer to const char.
* subsegs.c (`seg_name[]' definition): ditto;
* hash.c (hash_ask): rename argument `access' to `access_type'
to avoid shadowing library function.
* write.c (variable `the_object_file'): move from file scope
to block scope within write_object_file(); free it after use;
(fixup_segment): conditionally exclude it for OBJ_VMS.
(cvt_frag_to_fill): rename argument `headers' to `headersP'
to avoid shadowing file scope variable.
Mon Jan 23 21:42:39 1995 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_ip, case 'D'): Fix typo which caused
miscompilation of "diag" instructions.
Mon Jan 23 15:51:41 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* configure: Regenerated.
* config/tc-mips.c: Include libiberty.h.
Mon Jan 23 14:07:58 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
* config/tc-sh.h (tc_init_after_args): Don't define.
* config/tc-sh.c (md_begin): Remove unused variable table.
(md_assemble): Remove unused variable p.
(md_convert_frag): Cast fr_address to unsigned long for printf.
(md_apply_fix): Use as_warn_where rather than as_warn.
(sh_init_after_args): Remove empty function.
* configure.in (i386-*-gnu*elf*): New target.
Sat Jan 21 19:02:23 1995 Ian Lance Taylor <ian@tweedledumb.cygnus.com>
* hash.c (hash_ask): If we find the slot after wrapping around,
break out of the loop. Fixes bug in Jan 18 change.
Fri Jan 20 17:07:31 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* hash.c (hash_code): Undo last change.
Thu Jan 19 14:49:47 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/tc-alpha.c (alpha_ip): Initialize local variables to keep
gcc quiet.
(gpdisp_hi16_howto): Don't use "const" with reloc_howto_type.
(in_range_signed): Add parens around subtraction inside shift.
* gasp.c (do_data): Initialize local variable "opname".
(istrue): Provide a default case to set "res" and keep "gcc -Wall"
quiet.
* write.c (write_contents): Deleted unused variable.
(print_symbol_value_1): Declare.
* hash.c (hash_ask): Delete disabled non-strcmp version of the
code, and automatic variables used only in those sections.
* write.c (chain_frchains_together_1): Only define local variable
"prev_fix" if BFD_ASSEMBLER.
* flonum-konst.c (dummy1): Return void.
* config/tc-vax.c (md_assemble): Remove two comparisons of
unsigned numbers versus zero.
* as.h (bcopy): If neither memcpy nor bcopy is defined as a macro,
define to use memcpy.
* config/tc-alpha.c, config/alpha-opcode.h: Revert 2 June changes.
Turns out we never got the assignment done after all.
Cleanup of VAX and VMS code, from Pat Rankin:
* config/obj-vms.c: Changed exported function names to lower case.
(Changed call sites in write.c.) Declare VMS system function
names used, conditional on actually being on VMS. Changed many
functions that returned no useful value to now be declared to
return void. Removed many unused variables. Supply missing
return statements or values. Supply `default' case in switch
statements. Ensure local variables get initialized.
* config/tc-vax.c: Minor changes to silence "gcc -Wall".
* config/obj-vms.h, config/tc-vax.h: Added some missing
declarations.
Wed Jan 18 13:49:26 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* atof-generic.c (flonum_print) [TRACE]: New function.
(atof_generic) [TRACE]: Print multiplier before multiplication,
and print multiplication result before and after copy.
* flonum-mult.c (flonum_multip): Avoid sign extension problems
around multiplication operation.
* atof-generic.c (ASSUME_DECIMAL_MARK_IS_DOT): Define.
(atof_generic) [ASSUME_DECIMAL_MARK_IS_DOT]: Check for '.'
explicitly instead of calling strchr.
* config/tc-sparc.c (sparc_ip): When scanning successive opcode
table entries, check names for pointer equality before doing
string comparisons.
* hash.c (hash_ask): Call strcmp instead of expanding it inline.
(hash_code): Replaced with a version from bfd.
* config/obj-coff.c (write_object_file): If COFF_FLAGS isn't
defined, default it to zero.
Wed Jan 18 12:16:07 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
* write.c (fix_new_internal): Clear fx_bsr on those targets which
use it.
* expr.c (operand): Parenthesize && within ||.
* listing.c (listing_newline): Likewise.
(list_symbol_table): Use %lu to print sizeof.
* symbols.c: Comment out unused function indent.
(print_symbol_value_1): Cast pointer to unsigned long for printf.
* config/obj-coff.c (do_relocs_for): Only declare symbol_ptr if it
will be used.
* config/tc-h8300.c (md_begin): Remove unused variable reg.
(get_operand): Declare type of parameter direction. Remove unused
variable size.
(get_specific): Fix comment to avoid nested comments.
(check_operand): Cast X_add_number to unsigned long for printf.
(build_bytes): Remove unused local variables output_ptr, part, and
high.
(build_bytes): Cast X_add_number to unsigned long for printf.
(clever_message): Remove unused variable scan.
(md_assemble): Remove unused variable i.
(tc_coff_sizemachdep): Remove unused function.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-h8300.h (tc_reloc_mangle): Declare.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Tue Jan 17 10:58:06 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
* config/tc-mips.c (mips_4650): New static variable.
(md_begin): Handle a cpu string of "4650". If mips_4650 was not
initialized, set it to 0.
(append_insn): Don't insert nops around HI and LO on a 4650.
(mips_emit_delays): Likewise.
(mips_ip): Use INSN_ISA mask to check ISA of instruction. Check
for INSN_4650.
(md_longopts): Add m4650 and no-m4650.
(md_parse_option): Handle mips-cpu=4650. Handle -m4650 and
-no-m4650.
* doc/as.texinfo: Document new MIPS options.
Sat Jan 14 23:48:13 1995 Steve Chamberlain <sac@jonny>
* config/tc-w65.c, config/tc-w65.h, config/w65.mt: Newfiles.
* config/obj-coff.h: Cope with w65.
* configure, configure.in: Recognize w65.
Thu Jan 12 17:56:24 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* app.c (do_scrub_next_char) [__GNUC__ && __OPTIMIZE__]: If `get'
function is scrub_from_file, call scrub_from_file directly, and
get gcc's inlining capability into the act.
* Makefile.in (VMS_OTHER_OBJS): Add ../libiberty/hex.o.
(OBJS): Delete hex-value.o.
(REAL_SOURCES): Delete hex-value.c.
(hex-value.o): Delete dependencies.
* hex-value.c: Deleted.
* as.c (main): Call hex_init.
* expr.c, config/tc-mips.c: Include libiberty.h. Replace
hex_value array references with hex_* macros.
Wed Jan 11 17:51:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/tc-h8300.h (COFF_FLAGS): Don't define.
* config/tc-h8500.h (COFF_FLAGS), config/tc-sh.h (COFF_FLAGS),
config/tc-z8k.h (COFF_FLAGS): Ditto.
* config/obj-coff.c (KEEP_RELOC_INFO): Make sure it's always
defined.
* config/tc-m68k.c (m68k_ip, cases AOFF and AINDEX): Don't
generate 68020 addressing modes for a 68000 processor.
(md_estimate_size_before_relax, cases PCREL and PCLEA): Ditto.
Tue Jan 10 13:34:14 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/obj-coff.c (write_object_file): Don't treat h8300 and z8k
specially with regard to fixups.
Mon Jan 9 16:22:28 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/tc-mips.c (RELAX_RELOC1, RELAX_RELOC2): Cast values to
bfd_vma before subtracting.
* config/obj-coff.c (size_section): Handle rs_space like rs_fill,
but make sure fr_symbol is null.
(fill_section): Ditto.
Sun Jan 8 16:14:19 1995 Ian Lance Taylor <ian@tweedledumb.cygnus.com>
* config/tc-mips.c (mips_ip): Fix handling of floating point
values when GPOPT is not defined.
Fri Jan 6 16:59:41 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
* gasp.c: Include string.h. Put config.h before other includes.
* config/tc-alpha.c (alpha_ip): Delay calls to emit_add64 until
after any remaining operands are also known to match.
Fri Dec 30 18:21:41 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* listing.c (list_symbol_table): Build a format string based on
the size of the value to be printed, as long as "unsigned long" is
at least as wide, after handling the special case of 4-byte
values.
* Makefile.in (dependencies): Make $(OBJS) depend on as.h and
everything it includes. Delete those files from per-file
dependencies.
* as.h (relax_substateT): Now defined to be unsigned int.
(relax_stateT): Separate typedef from enum definition.
(enum _relax_state): Reordered for better punctuation. Added new
values rs_align_code and rs_space.
(lineno, struct lineno_struct): Unused, deleted.
* as.h: No longer include assert.h.
(as_assert): Declare.
(assert): New definition, calls as_assert longer needed.
(__PRETTY_FUNCTION__): Provide default for older versions of gcc.
* messages.c (as_assert): New function.
* gdbinit.in: Put a breakpoint there.
* read.c (s_space): Rewrite to handle general expressions.
Generate rs_space frags for non-constant values.
* write.c (cvt_frag_to_fill): Treat rs_align_code and rs_space
like rs_align and rs_org. Verify that fr_offset is non-negative,
and force frag type to rs_fill only after assertion checks.
(relax_segment): Treat rs_align_code like rs_align. Treat
rs_space like rs_org in the first switch; in the second, force the
operand to a constant, and use it for the growth size.
Wed Dec 28 20:57:37 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_subspace): For sections with the ZERO
attribute, set the "bss" field in the appropriate seginfo structure.
Wed Dec 28 15:01:01 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* subsegs.h: Include obstack.h.
Tue Dec 27 18:16:04 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* as.h (struct frag): Enable align* components now.
Tue Dec 20 14:56:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* frags.c (frag_init): Call obstack_begin on `frags'.
* subsegs.c (subsegs_begin): Don't do it here.
* as.c (main): Call frag_init before subsegs_begin.
* frags.c (frag_append_1_char): New function.
* frags.h (frag_append_1_char): Declare it.
(FRAG_APPEND_1_CHAR): Call it. Old definition is commented out
for now.
* as.h (struct frag): Added (but commented out) new fields for
tracking current alignment.
(frag_now_fix): Changed macro to function declaration.
* frags.c (frag_now_fix): Define function here.
(frag_new): Use it instead of accessing `frags' directly.
* frags.h (frags): Change comment to indicate it shouldn't be
accessed directly.
* subsegs.h (struct frchain): New field frch_obstack, intended to
eventually replace global `frags' obstack.
* subsegs.c (subseg_set_rest): Use frag_now_fix instead of
accessing `frags' directly. Initialize fields of new frchainS
explicitly instead of with memset.
* config/obj-coff.c (obj_coff_ln) [!BFD_ASSEMBLER]: Use
frag_now_fix.
* config/tc-mips.c (s_loc), config/obj-vms.c
(vms_resolve_symbol_redef), symbols.c (colon): Likewise.
* config/tc-m68k.c (md_apply_fix_2): Use offsetT and addressT
instead of long and unsigned long.
(md_apply_fix): Cast value before passing it.
* config/obj-aout.h, config/obj-coff.c, config/obj-elf.h,
config/obj-som.h, config/tc-h8500.c, config/tc-hppa.c,
config/tc-hppa.h, config/tc-sh.c, config/tc-z8k.c: Don't rely on
use of ".." when including header files.
* config/obj-coff.c (fixup_segment): Reformat condition in an `if'
statement.
* Makefile.in (SUBDIR_INCLUDES): Deleted.
Tue Dec 20 13:40:36 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
* config/obj-coff.h: Include bfd/libcoff.h, not libcoff.h.
Mon Dec 19 16:53:36 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
* config/tc-mips.c (load_register): Rewrite to handle O_big 64 bit
constants.
(mips_ip): Accept O_big constants in case 'I'. Change case
'i'/'j' to treat an O_big constant as an out of range value.
Mon Dec 19 14:15:07 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_subspace): Make sure SEC_HAS_CONTENTS is
clear for a section with the "ZERO" attribute.
* Reduce useless symbols for ELF in an attempt to make smaller
objects and speed up the linker.
* config/tc-hppa.c (struct call_info): Replace end_symbol field
with a size field.
(hppa_elf_mark_end_function): Delete unneeded function.
(pa_build_unwind_subspace): For the 2nd unwind relocation, use
the function symbol + function size instead of a special symbol
for the end of the function.
(process_exit): Compute the function size here. Don't call
hppa_elf_mark_end_of_function anymore.
(pa_procend): Likewise.
(hppa_fix_adjustable): Only reject 32bit relocations for SOM.
(elf_hppa_final_processing): Simplify.
Mon Dec 19 13:49:07 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* configure.in: Recognize mips-sony-bsd and mips-dec-bsd, but
reject other vendors until we can be sure we're consistent with
bfd.
* config/obj-vms.c (Create_VMS_Object_File): Instead of formatting
a buffer to pass to `error', just call `as_fatal' directly.
(VMS_Psect_Spec): Ditto.
(VMS_TBT_Module_Begin, VMS_TBT_Source_File, gen1,
VMS_typedef_parse, VMS_LSYM_Parse, VMS_Emit_Globalvalues): Call
as_tsktsk instead of printf.
(VMS_TBT_Module_Begin, VMS_TBT_Line_PC_Correlation,
VMS_TBT_Source_File, VMS_TBT_Source_Lines,
VMS_Store_Repeated_Data, VMS_Check_For_Main): Use explicit
integers rather than sizeof expressions using basic integer types,
in case host and target aren't the same. Use memcpy or COPY_*
macros instead of possibly unaligned word or longword assignment.
* config/obj-vms.h (OBJ_SYMFIELD_TYPE): New macro.
* config/obj-vms.c (VMS_Store_PIC_Symbol_Reference,
VMS_Check_For_Main, VMS_write_object_file): Use sy_obj instead of
forcing sy_number to hold a pointer.
Fri Dec 16 14:40:16 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/tc-sh.c (md_begin): Don't fill in md_relax_table here.
(md_relax_table): Use static initialization.
* config/tc-h8300.c (parse_exp, get_operands, clever_message,
md_assemble, tc_crawl_symbol_chain, md_undefined_symbol,
tc_headers_hook, md_operand, md_number_to_chars): Don't use DEFUN.
* Makefile.in (CHECKFLAGS): Don't pass AS_FOR_TARGET,
CC_FOR_TARGET, OBJDUMP_FOR_TARGET, NM_FOR_TARGET; they're not
used.
(AS_FOR_TARGET, CC_FOR_TARGET, OBJDUMP, OBJDUMP_FOR_TARGET, NM,
NM_FOR_TARGET): Don't define.
(VMS_OTHER_OBJS): Add xmalloc.o and xexit.o from libiberty.
(tooldir): Use exec_prefix, not libdir.
Fri Dec 16 11:07:10 1994 Stan Shebs <shebs@andros.cygnus.com>
* config/obj-coff.h: Include libcoff.h, not ../bfd/libcoff.h.
* as.h: Include progress.h.
* as.c (main): Call START_PROGRESS and END_PROGRESS.
(main, perform_an_assembly_pass): Call PROGRESS.
Fri Dec 16 00:46:08 1994 Ian Lance Taylor <ian@tweedledumb.cygnus.com>
* write.c (adjust_reloc_syms): Use bfd_is_und_section and
bfd_is_abs_section rather than comparing against &bfd_und_section
and &bfd_abs_section.
Thu Dec 15 15:27:14 1994 Jim Wilson <wilson@chestnut.cygnus.com>
* config/tc-sh.c (md_begin): Use a local variable when
initializing md_relax_table to avoid errors about modifying a
const data structure.
Tue Dec 13 15:42:27 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
* config/tc-ppc.c (tc_gen_reloc): Remove OBJ_ELF hack which
appears to no longer be needed.
Tue Dec 13 08:04:15 1994 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (macro_build): Accept BFD_RELOC_PCREL* without
requiring that the X_op_symbol be in the text_section.
Fix typo.
2005-07-16 04:31:22 +02:00
(macro): Change the test for a legal expression difference to
19990502 sourceware import
1999-05-03 09:29:11 +02:00
correspond to changes in pseudo_set in read.c.
Fri Dec 9 21:04:17 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* write.c (write_relocs) [RELOC_EXPANSION_POSSIBLE]: Use
bfd_install_relocation.
* ecoff.c (ecoff_set_gp_prolog_size): If there is no current
routine, just return.
* config/tc-alpha.c (alpha_ip, case 'B', subcase 'c'): Use opcode
value from pattern instead of assuming jsr.
* config/alpha-opcode.h (jmp): Add a "1,Bc" form.
Thu Dec 8 17:48:25 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* Makefile.in (NM_FOR_TARGET): Use ../binutils/nm.new, not just
plain nm.
* configure.in (ns32k-pc532-mach*): Select correct emulation.
(mips-sony-bsd*): Use ecoff.
(mips-*-gnu*): New target, using aout format, from Roland McGrath.
* configure: Regenerated.
Tue Nov 29 13:58:10 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
Use libiberty version of xmalloc:
* Makefile.in (REAL_SOURCES): Delete xmalloc.c.
(OBJS): Delete xmalloc.o.
(xmalloc.o): Delete dependencies.
* as.c (main): Call xmalloc_set_program_name once program name is
known.
* config/tc-alpha.c (in_range_signed, in_range_unsigned): New
routines, split from in_range.
(in_range): Deleted. All calls changed to in_range_*signed.
(create_lita_section): Macro deleted. Single use expanded in
place.
(alpha_ip): Handle `t' and `8' operand types.
(md_apply_fix): Handle BFD_RELOC_12_PCREL. Print name of
unhandled relocation types.
* config/alpha-opcode.h: Added HALT and DRAINA. Disabled MOVI,
since it doesn't work, and isn't supported by the native
assembler.
* input-scrub.c: Change wording of a comment to avoid interference
with Cygnus source-control tools.
* as.h (errno) [NEED_DECLARATION_ERRNO]: Declare.
* config/tc-m68k.c (init_table): List buscr and pcr control
registers.
(m68k_ip, case 'J'): Handle them.
Delete signal handler code. It's been disabled since March 1993
without complaints.
* as.c: Don't include signal.h.
(got_sig): Unused function deleted, declaration deleted.
(SIGTY): Macro deleted.
(main): Deleted disabled code for establishing signal handler.
Mon Nov 28 11:37:35 1994 Doug Evans <dje@canuck.cygnus.com>
* app.c (do_scrub_next_char): Insert missing newline at end of file
like warning says we do.
Mon Nov 28 00:11:15 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.h (pa_check_eof): Declare new extern function.
(tc_frob_file): Define to call pa_check_eof.
* config/tc-hppa.c (pa_check_current_space_and_subspace): New
function to verify the current space and subspace are reasonable.
Call for the appropriate pseudo-ops and before instruction parsing.
(pa_check_eof): New function to verify enter/exit and proc/procend
pairs match at EOF.
(pa_code): Simplify.
* config/obj-som.c: Delete #if 0 code.
Wed Nov 23 19:36:09 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* config/obj-coff.h (TARGET_FORMAT): Select between coff-shl and
coff-sh.
* config/sh.mh (TARG_CPU_DEPENDENTS): Get it right.
* config/tc-sh.c (little): New function.
(md_parse_option): Notice new option.
(build_relax, build_Mytes, md_atof, md_convert_frag, md_apply_fix):
Cope with little endian data.
* config/tc-sh.h (COFF_MAGIC, LISTING_HEADER): Endian dependent.
Wed Nov 23 10:54:38 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (tc_gen_reloc, ELF variant): Revert last
change. The real bug was in bfd/elfcode.h and has been fixed.
Tue Nov 22 23:31:20 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (tc_gen_reloc, ELF variant): Add section->vma
to the relocation's offset.
Tue Nov 22 14:37:58 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* Makefile.in (INSTALL_XFORM): Fix typo.
Tue Nov 22 10:23:25 1994 J.T. Conklin <jtc@rtl.cygnus.com>
* config/tc-alpha.c (s_alpha_set): Ignore the .set (no)move and
.set (no)volatile directives.
Tue Nov 15 21:44:13 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_subspace): Make sure to always reset
current_subspace.
(pa_text, pa_data): Likewise.
* config/tc-hppa.c (pa_align): New function. Aligns the current
offset within the current subspace along with updating the
alignment of the subspace itself.
(pa_subspace): Default alignment to one byte rathern than zero
bytes to avoid setting alignment to log2(0).
(md_pseudo_table): Use pa_alignment for .align.
Tue Nov 15 15:24:45 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* messages.c (as_fatal): Always put a space after "fatal error:"
when printing message.
Tue Nov 15 11:10:43 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.h (obj_frob_symbol): Delete.
(tc_frob_symbol): Make definition conditional on OBJ_SOM or
OBJ_ELF. For ELF subtract out symbol->section->vma for non common
symbols.
Wed Nov 9 14:53:03 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/te-delta.h: New file, derived from te-sysv32.h.
Wed Nov 9 11:52:44 1994 Ian Lance Taylor (ian@cygnus.com)
* config/tc-ppc.c (ppc_bf): Always set coff_line_base.
Mon Nov 7 01:58:49 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* Makefile.in (VERSION): Bump to 2.5.3.
* configure.in: Compare generic cpu name against "sparc", not
"sparc*", since sparc variants should be changed to "sparc".
* configure: Regenerated with autoconf 2.1.
* config/tc-a29k.c (octal, toHex): Variables deleted.
(isoctal): Macro deleted.
(md_begin): Don't initialize them.
(machine_ip, case 'P'/'A'): For absolute operand, generate an
error message if it's out of range.
(md_apply_fix, case RELOC_JUMPTARG): Check range for PC-relative
jumps.
(md_apply_fix): Delete code inside "#if 0".
Thu Nov 3 20:20:40 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/go32.mh: Unused file deleted.
* read.c (get_absolute_expression): Indicate that the error may
merely be that the expression can't currently be reduced.
Thu Nov 3 16:09:59 1994 J.T. Conklin (jtc@rtl.cygnus.com)
* config/tc-m68k.h (TARGET_FORMAT): If TE_NetBSD define as
"a.out-m68k-netbsd".
* config/tc-sparc.h (TARGET_FORMAT): If TE_NetBSD define as
"a.out-sparc-netbsd".
* config/te-nbsd.h: New file, NetBSD target emulation
* config/te-netbsd.h: Removed.
* configure.in (i[345]86-*-netbsd*,m68*-*-netbsd*,sparc*-*-netbsd*):
Set bfd_gas. Use nbsd emulation.
Thu Nov 3 17:44:47 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
Changes from net 2.5.2 release branch:
* configure.in: Put AC_DEFINE(sparcv9) on its own line, so that
the shell variable settings associated with it are permanent. For
CPUs requiring bfd_gas=yes, select it based on CPU only, not
individual target names. Handle m68k-hp-hpux*, not just -hpux.
* config/tc-z8k.c (tc_coff_symbol_emit_hook): Add dummy argument
to match prototype in obj-coff.h.
* configure.in: Skip tests for defining WANT_FOPEN_BIN and
IBM_COMPILER_SUX.
* acconfig.h: Deleted them.
* configure, conf.in: Rebuild with autoconf 2.0.
* config/go32.cfg, config/vms-conf.h: Updated.
* config/tc-m68k.c (md_apply_fix_2, md_convert_frag_1): Always use
IBM_COMPILER_SUX version of code, with comments indicating why.
* listing.c (file_info): Use text mode when opening file for read.
Use "r" directly, no macro.
* input-file.c (input_file_open): Don't use FOPEN_RT, just use
"r".
* read.c (s_include): Ditto.
* output-file.c (output_file_create): Try both "wb" and "w", don't
bother with FOPEN_* macros.
* as.h: Don't include fopen-*.h.
* config/alpha-opcode.h: Make "ret" with no operands equivalent to
"ret zero,(ra)", to match OSF1 and to be consistent with both
one-operand forms.
Patches from DJ Delorie:
* as.h (alloca): undef alloca before defining it just in case
* config/go32.cfg: new file for autoconf values
* config/te-go32.h: new file
* configure.bat: new for autoconf
* config/tc-i386.c (md_assemble): Fix typo in GOTPC check; had =
for ==.
* configure.in: If target_frag doesn't exist, use /dev/null.
* as.c (parse_args): For non-VMS systems, re-add `v' to
std_shortopts. Add "verbose" to list of long options.
* write.c (adjust_reloc_syms): When generating an absolute section
symbol as a placeholder, don't mark it as used in a relocation
entry, here.
* Makefile.in (comparison): Compare using makefile code from gcc,
stripped down to discard subdir stuff and adapted to give a
non-zero exit status if either file differs.
Thu Nov 3 15:43:02 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
* config/tc-mips.c (load_address): Fix RELAX_ENCODE arguments for
NO_PIC case.
Tue Nov 1 16:10:59 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
* config/tc-mips.c (s_change_sec): If not GPOPT, don't permit
switching to the readonly data section.
* ecoff.c (ecoff_directive_type): Fix warning message.
Sun Oct 30 00:57:35 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_proc): Delete disabled code to put each
proc in its own subspace, we're not going to use it.
Tue Oct 25 14:44:33 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
* config/tc-mips.c (macro): Ensure that mips2 case of M_LI_DD in
.rdata does not become a variant frag.
* config/tc-mips.c (mips_cpu): Initialize to -1.
(md_begin): Don't mips_cpu if it was already set.
(md_parse_option): For -mipsN, don't set mips_cpu if it was
already set. For -mcpu=, just set mips_cpu, not mips_isa.
Fri Oct 21 20:42:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
* config/tc-mips.c (md_pseudo_table): If OBJ_ELF, handle .section.
(s_elf_section): New static function.
* ecoff.c (ecoff_build_symbols): Don't abort if we don't recognize
the section when setting the storage class; default to sc_Data.
Thu Oct 20 00:43:38 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (md_apply_fix): Set new_val to 8 for all
fixups to branch instructions (not just pc-relative ones) which
will generate SOM relocations.
Wed Oct 19 13:41:56 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
* config/tc-a29k.c: Include ctype.h with angle brackets.
(define_some_regs): Add new special register names defined on the
29040.
(parse_operand): Add argument opt. If non-zero, don't warn about
a missing operand.
(machine_ip): If handling argument type 'I', pass opt as non-zero
to parse_operand. Handle new optional operand type 'I'.
(md_undefined_symbol): Handle special register names (srNN).
Tue Oct 18 00:45:24 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* write.c (renumber_sections): New static BFD_ASSEMBLER function.
(write_object_file): Call it after removing gas created sections.
Mon Oct 17 18:06:05 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
* symbols.c (symbol_create): Use udata.p, not just udata.
* config/obj-elf.c (obj_ecoff_set_ext): Likewise.
(elf_get_extr): Likewise.
* read.c (read_a_source_file): The second argument to as_where is
unsigned int *, not int *.
Mon Oct 17 02:26:32 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c: Eliminate all uses of fx_addnumber.
(tc_gen_reloc): Simplify. It's no longer necessary to set a
reloc's addend field to zero for function symbols.
(md_apply_fix): Simplify. For fixups which will require a SOM
reloc, just clear out the necessary bits in the output file.
Fri Oct 14 19:06:46 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* Makefile.in (BISON): Use bison -y, not bison.
Thu Oct 13 19:22:54 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* Makefile.in (VERSION): Updated to 2.5.
(clean-here): Delete stamp-mk.com.
(distclean): Delete .gdbinit.
* Version 2.5 released.
Wed Oct 12 20:30:51 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/te-nbsd532.h: Renamed from te-netbsd532.h.
* configure.in, configure: Adjusted.
Wed Oct 12 16:33:38 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
* config/cplus-dem.c: Removed. It isn't used. Even if it was,
it's better to use the one in libiberty.
Wed Oct 12 18:48:39 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* symbols.c (resolve_symbol_value, case O_symbol): Undo last
change; it breaks the rs6000 support, and doesn't seem to be
needed.
Wed Oct 12 11:56:50 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
* config/tc-i386.h,te-netbsd532.h (TARGET_FORMAT): Changed to
a.out-<arch>-netbsd to match corresponding changes in BFD.
Wed Oct 12 11:06:11 1994 Ian Lance Taylor (ian@cygnus.com)
* config/tc-ppc.c (ppc_fix_adjustable): Resolve symbol values
rather than explicitly adding the frag address.
* config/obj-coff.c (coff_frob_symbol): Add a zero entry to mark
the end of the line numbers; this replaces the zero entry which
used to be added by coff_add_linesym, removed Oct 7.
(coff_adjust_section_syms): Ignore sections with no seginfo.
Wed Oct 12 01:41:37 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* Makefile.in (bootstrap, bootstrap2, bootstrap3): Create a
"stage" symlink to the appropriate stage* directory, and use it
instead in the -B options.
(comparison): Revert yesterday's change.
Tue Oct 11 16:48:11 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/tc-sparc.c (tc_gen_reloc): For non-a.out relocations, if
pc-relative, use fx_offset only, ignore address of relocation.
Tue Oct 11 15:24:00 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
* config/tc-mips.c (mips_ip): Don't use S_IS_LOCAL when checking
for an embedded PIC switch expression, since the definition of
S_IS_LOCAL was changed.
Tue Oct 11 15:05:11 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* Makefile.in (comparison): When comparing as.new or gasp.new, try
running the binary through sed to avoid differences due to
"stage1" or "stage2" having been written into the binary.
Sat Oct 8 01:48:04 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com)
ELF symbol size handling, based on code from Eric Youngdale:
* config/obj-elf.h (OBJ_SYMFIELD_TYPE): New macro. Adds an
expression pointer to the symbol structure, used for `size'
expressions that couldn't be reduced to constants when initially
processed.
(elf_frob_symbol): Declare.
(obj_frob_symbol): Call elf_frob_symbol always, rather than
ecoff_frob_symbol only if ECOFF_DEBUGGING defined.
* config/obj-elf.c (obj_symbol_new_hook): Deleted unused code.
Clear sy_obj field.
(obj_elf_size): Deleted unused code. If size is non-reducible
expression, allocate some storage for the sy_obj field and copy
the expression.
(elf_frob_symbol): New function. Computes sizes, calls
ecoff_frob_symbol if appropriate.
* write.c (fixup_segment): For i386 elf and coff (for now), don't
add in value of symbol from another defined section of the file.
Fri Oct 7 17:54:02 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/tc-m88k.h (TC_KEEP_FX_OFFSET): Define.
* config/obj-coff.c (do_relocs_for): Test only TC_KEEP_FX_OFFSET,
rather than both it and TC_M88K.
(coff_adjust_section_syms): New function.
(coff_frob_section): For non-empty sections, create aux entry for
the section symbol, indicating the size.
(n_line_nos): New variable.
(add_lineno): Increment it.
(coff_add_linesym): Increment n_line_nos, don't call add_lineno.
(coff_frob_file): New function; map coff_adjust_section_syms over
sections.
(obj_coff_line): Only reset line_base for .bf symbols.
* config/obj-coff.h (coff_adjust_section_syms, coff_frob_file):
Declare.
(obj_frob_file): New macro.
* config/obj-coff.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Renamed from
obj_frob_forward_symbol, and rewritten for new parameter list.
Mon Oct 3 21:02:38 1994 Pat Rankin (rankin@eql.caltech.edu)
* config/obj-vms.h (S_IS_LOCAL): fix obsolete flagseen[] reference.
Wed Oct 5 11:49:26 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
* config/obj-ecoff.c (obj_pseudo_table): Accept .esize and .etype
as synonyms for .size and .type.
Wed Oct 5 00:08:10 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-coff.c (coff_frob_section): Remove assert about
section alignment.
* config/tc-sparc.c (md_section_align): Use section alignment, not
xvec align_power_min field.
Fri Sep 30 19:05:20 1994 Pat Rankin (rankin@eql.caltech.edu)
* vmsconf.sh (make-gas.com): handle DCL verification to enable
sensible feedback to the user while gas is being built.
Fri Sep 30 16:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* Makefile.in (DISTSTUFF): New variable, listing only make-gas.com
for now.
(diststuff): New target; builds DISTSTUFF.
(realclean): Separate target, depend on clean and distclean, then
delete DISTSTUFF.
* make-gas.com: Deleted.
* config/tc-i386.c (i386_validate_fix) [BFD_ASSEMBLER]: New
function. Converts reloc for "foo-GOT" to BFD_RELOC_386_GOTOFF
reloc for "foo".
(i386_operand): Don't look up section symbol for
undefined_section.
(reloc): Always permit return of 8- and 16-bit relocation types.
Add a space after "pc-relative" in the error message.
(tc_i386_fix_adjustable) [BFD_ASSEMBLER]: Reject
BFD_RELOC_386_GOTOFF relocs.
(i386_operand): For any GOTOFF reloc, convert it to a BFD_RELOC_32
with a "foo-GOT" value.
* config/tc-i386.h (i386_validate_fix): Declare it.
(TC_VALIDATE_FIX): New macro -- call it.
(NOP_OPCODE): Cast to `char' to avoid compiler warnings.
* as.h: If __STDC__ is not defined and varargs.h is available, use
it rather than stdarg.h.
* write.h (struct fix): Added new bitfield fx_plt, for fixups
referring to PLT entries.
* write.c (fix_new_internal): Initialize fx_plt to zero.
(adjust_reloc_syms): Re-fetch `sym' after top of reduction loop.
Don't adjust fx_offset by frag address, since S_GET_VALUE now
includes the frag address.
(fixup_segment): Changed local var PCREL to type int, added PLT.
If PC-relative fixup refers to a PLT entry for a symbol in the
current section, don't reduce it.
* write.c (adjust_reloc_syms): Exit loop through a label. If
DEBUG5 is defined, print out each fixup before and after
processing.
(fixup_segment): If DEBUG5 is defined, print out each fixup before
and after processing.
(print_fixup): Added prototype. Show address on first line. Show
fx_offset and fx_subsy. [!BFD_ASSEMBLER]: Only show fx_r_type if
NEED_FX_R_TYPE is defined.
* symbols.c (print_symbol_value_1): Check S_IS_LOCAL, S_IS_EXTERN,
S_IS_DEBUG, S_IS_DEFINED also.
Thu Sep 29 18:57:06 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* Makefile.in (all): Depend on .gdbinit.
(.gdbinit): Rebuild from gdbinit.in by running config.status.
* gdbinit.in: Define new function "pf". Fix doc on "pe" and "ps".
* write.c (print_fixup): Print source location on first line.
Show fx_r_type and fx_addsy fields.
Wed Sep 28 14:56:39 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* configure.in: Set bfd_gas for all sparc targets in one place,
instead of separately for each. Correctly handle user-supplied
"--enable-bfd-gas" option.
* gdbinit.in: Move "break abort" to end, in case gdb complains.
* as.h (PRINTF_WHERE_LIKE, PRINT_LIKE) [USE_STDARG, !__GNUC__]:
Use PARAMS macro.
* symbols.c (resolve_symbol_value, case O_symbol): Don't do any
processing if add_symbol is undefined or in expr_section.
(resolve_symbol_value, case O_add): For symbol plus
constant-valued symbol, convert to O_symbol and re-reduce.
(S_GET_VALUE): If symbol needs resolving, resolve it.
(indent_level): No longer static.
(print_symbol_value_1): Don't print frag address if it matches
zero_address_frag. Don't print "resolving" if already resolved.
Print segment name. Don't call print_expr_1 on an undefined
symbol.
(print_expr_1): Fix whitespace before printing X_add_number.
* expr.c (make_expr_symbol): No longer static. Use symbol_create,
not symbol_new, for symbols holding expression values.
* expr.h (make_expr_symbol): Move declaration here.
* write.c (fix_new_exp): Handle O_add by creating an
expression-valued symbol, and calling fix_new_exp recursively.
(adjust_reloc_syms): If a fixup's symbol value is a sum of an
undefined symbol and a constant, fold the constant into the fixup,
and refer to the undefined symbol directly. Then process the
fixup again from scratch.
(write_object_file): Before calling adjust_reloc_syms, make a pass
through the symbol list trying to resolve values.
* write.c (print_fixup): New routine, for debugging.
(write_relocs): Call bfd_install_relocation. Deleted various
hacks for working around problems with bfd_perform_relocation.
* Makefile.in (VERSION): Update to 2.4.90.
Wed Sep 28 11:50:40 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* Makefile.in (gasp.o): Depends upon config.h.
* config/tc-mips.c: Include subsegs.h.
(md_apply_fix): If an unconditional b or bal overflows, and we are
not assembling PIC code, replace it with a j or jal.
* config/tc-mips.c (md_apply_fix): Correct branch overflow test.
Use as_bad_where and as_warn_where rather than as_bad and as_warn.
Mon Sep 26 17:15:59 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* write.c (write_relocs): Add file name and line number to
as_fatal calls. Handle bfd_reloc_overflow case specifically when
RELOC_EXPANSION_POSSIBLE.
Fri Sep 23 16:11:28 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* as.h (USE_STDARG, USE_VARARGS): Define one or neither of these
here. Use them for deciding which PRINTF*LIKE macro definitions
to use.
* messages.c: Use them, instead of NO_STDARG, NO_VARARGS.
[!USE_STDARG && !USE_VARARGS] (va_alist, va_dcl, ...): Provide
default definitions matching what we were doing before.
(as_tsktsk): Remove the non-stdarg, non-varargs version, and
always use the varargs form if not using stdarg. It's safe to
always use vfprintf, because libiberty will provide it if the
native system doesn't. Also, always make format be const.
(as_warn, as_warn_where, as_bad, as_bad_where, as_fatal): Ditto.
Fri Sep 23 14:42:34 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/tc-mips.c (load_register): Always use addiu when adding a
constant to $zero--no need to use daddiu.
(macro): Hack the -mips3 overflow tests to not fail when offsetT
is only 32 bits.
* symbols.h (copy_symbol_attributes): Declare.
Thu Sep 22 21:58:24 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* listing.c: Bugfixes based in part on patches from Paul
Kranenburg.
(listing_newline): Check filename as well as line number when
deciding whether to record it.
(list_symbol_table) [S_IS_REGISTER]: Check that S_IS_REGISTER is
false (if defined) as well as checking for reg_section.
(listing_listing): Iterate fetching lines while line number is too
low, and we haven't run off the end of the input file.
* config/vms-conf.h: Changed HAVE_DELETE to HAVE_REMOVE.
Thu Sep 22 13:39:10 1994 Kung Hsu (kung@x1.cygnus.com)
* ecoff.c (ecoff_generate_asm_lineno): check if
current_stabs_filename is NULL before strcmp.
* read.c (read_a_source_file): fix a bug in generate_asm_lineno
checking.
Wed Sep 21 18:17:35 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
* config/ho-*.h: Now-unused files deleted.
* symbols.c (copy_symbol_attributes): New function. Copies BFD
symbol flags and calls OBJ_COPY_SYMBOL_ATTRIBUTES.
(resolve_symbol_value, case O_symbol): Call it, if X_add_number is
zero. Don't call obj_frob_forward_symbol.
* read.c (pseudo_set): Call copy_symbol_attributes, but only if
X_add_number is zero.
* config/obj-elf.h (obj_frob_forward_symbol): Deleted.
* config/tc-i960.c: Lots of whitespace, comment reformatting,
using GNU indent.
(strchr): Don't declare.
[BFD_ASSEMBLER]: Don't compile md_convert_frag,
md_estimate_size_before_relax, md_ri_to_chars,
md_create_short_jump, md_create_long_jump.
(brtab_emit): Use data_section, not SEG_DATA.
Mon Sep 19 17:14:44 1994 Pat Rankin (rankin@eql.caltech.edu)
* config/vms-conf.h: new file, manually derived from conf.in.
* config-gas.com: use it, and eliminate obsolete "host.h".
Wed Sep 21 11:11:30 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/tc-ppc.c (ppc_current_block): New static variable.
(ppc_stabx): Set sy_tc.within of a C_STSYM symbol to
ppc_current_block. Don't move around any stab symbol, just those
for common symbols.
(ppc_bs): Set ppc_current_block.
(ppc_es): Clear ppc_current_block.
(ppc_frob_symbol): Set the value of a C_STSYM symbol to the offset
from the csect of the enclosing block.
* config/tc-mips.c (insns_since_cache_access): Remove.
(append_insn): Remove setting of insns_since_cache_access, and
special 4600 handling; it turns out not to be required.
Tue Sep 20 16:13:18 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/tc-mips.c (md_shortopts): Remove E.
(md_longopts): Add EB and EL.
(md_parse_option): Handle -EB and -EL as separate options, rather
than as a single -E option with an argument.
Mon Sep 19 12:42:05 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (hppa_fix_adjustable): Reject reductions
involving global symbols too.
Mon Sep 19 12:12:46 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* as.h: Test NEED_DECLARATION_*, not NEED_*_DECLARATION.
* configure.in: Test for remove, not delete. Fix cross-assembler
test.
* as.h: Test HAVE_REMOVE, not HAVE_DELETE; define unlink to
remove, not delete.
* read.c (pseudo_set, case O_symbol): If
OBJ_COPY_SYMBOL_ATTRIBUTES is defined, invoke it.
[BFD_ASSEMBLER]: Copy BSF_FUNCTION setting too.
* config/obj-elf.h (OBJ_COPY_SYMBOL_ATTRIBUTES): Define.
Wed Aug 10 19:15:30 1994 Pat Rankin (rankin@eql.caltech.edu)
* config/obj-vms.h (DSG_S_C_UBITU, DST_K_VFLAGS_DSC, DST_K_TS_ATOM,
many others): new macros; values obtained from "DSTRECRDS.SDL".
* config/obj-vms.h (various): use them.
(USE_BITSTRING_DESCRIPTOR): new macro, for selecting bitfield
representation (only enum bitfields can avoid being bitstrings).
(bitfield_suffix, setup_basic_type): new routines.
(VMS_typedef_parse): use them. Now recognize bitfields of all
integral types, not just type `int'. Caveat: the representation
used for bitfields still does not work for objects placed in
registers, and gcc's optimizer sometimes puts small structs there.
Tue Jun 14 17:31:44 1994 Pat Rankin (rankin@eql.caltech.edu)
* read.c (s_text) [#if OBJ_VMS]: clear the IN_DEFAULT_SECTION
bit from const_flag.
* config/obj-vms.h (IN_DEFAULT_SECTION): define this macro.
(tc_frob_label): define this to call vms_check_for_special_label,
and declare the latter.
* config/obj-vms.c (vax_g_doubles): declare this file-scope
variable.
(const_flag): initialize to IN_DEFAULT_SECTION instead of 0.
(vms_check_for_special_label): new routine (tc_frob_label).
(VMS_TBT_Routine_End): don't bother checking for `gcc_compiled.'
and `gcc2_compiled.' labels; they won't reach here any more.
(VMS_typedef_parse) [case 'r']: for types `double' and `complex
double', use `vax_g_doubles' flag to select type of double.
(VMS_write_object_file) [traceback setup]: don't pass symbols
with the IN_DEFAULT_SECTION attribute to the TBT_Routine_Begin
and TBT_Routine_End functions.
Mon Jun 6 20:52:20 1994 Pat Rankin (rankin@eql.caltech.edu)
* config/obj-vms.c (VMS_TBT_Routine_End): cache the result of
S_GET_VALUE() to avoid many repeated function calls.
(VMS_Check_For_Main) [#if HACK_DEC_C_STARTUP]: capitalize
_C$MAIN_ARGS in advance, in case -h3 (leave symbol name as-is)
gets requested. [All the HACK_DEC_C_STARTUP code appears to
be obsolete; gcc does it automatically for vms target. It's
also misnamed, because it is for the "VAX C" run-time library,
not the newer "DEC C" one which has much different startup code.]
{various}: use `S_SET_xxx(symbol,new_value)' rather than
`S_GET_xxx(symbol) = new_value'.
Mon Sep 19 12:05:03 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/obj-coff.c (c_dot_file_symbol): Use bfd_abs_section_ptr,
not &bfd_abs_section.
Thu Sep 15 18:36:34 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* expr.c (clean_up_expression): Use addressT, not bfd_vma.
Tue Sep 13 20:05:47 1994 Jeff Law (law@snake.cs.utah.edu)
* expr.c (expr): Don't reduce the difference of two symbols in the
same frag if the symbols are not in normal sections.
* config/obj-som.h (S_SET_OTHER, S_SET_TYPE): Delete a.out crud.
(S_SET_DESC, S_GET_OTHER, S_GET_TYPE, S_GET_DESC): Likewise.
(obj_attach_unwind_info): Do not define. Not needed anymore.
* config/tc-hppa.c: Delete whitespace at EOL.
(struct hppa_fix_struct): Delete fx_unwind field and all references.
(fix_new_hppa): Last arg is now a pointer to an int. Do not
call obj_attach_unwind_info anymore. For SOM R_ENTRY and R_EXIT
fixups, store 32bits of unwind information in the fx_addnumber
field of the fixup.
(md_assemble, pa_entry, process_exit, pa_procend): For SOM R_ENTRY
and R_EXIT fixups, pass a NULL pointer to fix_new_hppa, and a
pointer to 32 bits of unwind info.
(tc_gen_reloc): For SOM R_ENTRY and R_EXIT fixups, set the symbol
pointer to the dummy symbol; set the addend field to fx_addnumber.
(pa_comm, pa_equ, pa_type_args, pa_import): Use bfd_XXX_section_ptr
rather than &bfd_XXX_section.
Tue Sep 13 21:15:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/tc-i386.c (md_apply_fix_1): For GOTPC relocs, decrement
value by one; discard adjustments previously being made. From
Eric Youngdale.
VMS- and Vax-related changes from Pat Rankin:
* Makefile.in (VMS_OTHER_OBJS): add concat, getopt, and getopt1.
* vmsconf.sh: no longer have make-gas.com echo text about needing
to modify the gcc-vms driver when intending to use with gcc 1.x.
* as.c (parse_options): suppress 'v' from std_short_options and
eliminate VMS-specific conditional initialization;
[default case]: check for '-v' if md_parse_options doesn't recognize
an option;
[default case, #if VMS]: check for filename argument when '-v' seen;
[case 'v']: delete.
* config/tc-vax.c (md_assemble): don't rely on `this_add_number'
for O_big literal operands (double floats and long long ints);
[VMS, md_shortopts]: add second colon after 'v';
(md_parse_options) [VMS, case 'v']: check for argument, so
caller can handle `-v' w/o arg.
Tue Sep 13 16:45:08 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* config/obj-coff.c (do_relocs_for): If TC_KEEP_FX_OFFSET
is defined, put the tx_offset into the r_offset.
* config/tc-sh.c (line_comment_chars): Add #
(tc_reloc_mangle): Deleted.
* config/tc-sh.h (TC_KEEP_FX_OFFSET): Define.
(TC_RELOC_MANGLE): Delete.
Tue Sep 13 16:20:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* flonum-konst.c: Change preprocessor tests of HO_VMS to just VMS.
* hex-value.c: Ditto.
* config/obj-vms.c: Ditto.
* config/tc-sparc.c (sparc_ip): Replace as_bad/exit sequence with
a call to as_fatal.
* config/tc-i860.c (i860_ip): Ditto.
* config/tc-hppa.c (pa_ip): Ditto.
* config/tc-alpha.c (alpha_ip): Ditto.
* as.c (parse_args): Ditto.
* config/tc-mips.c (mips_ip): Replace as_warn/exit sequence with a
call to as_fatal.
* write.c (write_contents): Use EXIT_FAILURE.
* output-file.c (output_file_create, output_file_close,
output_file_create, output_file_close): Ditto.
* messages.c (as_fatal): Ditto.
* config/obj-som.c (obj_som_version, obj_som_copyright): Ditto.
* config/obj-ieee.c (write_object_file): Ditto.
* config/obj-coff.c (write_object_file): Ditto.
* config/tc-vax.c (main): Use EXIT_SUCCESS.
* config/tc-m68k.c (main): Ditto.
* hash.c (main): Pass a value to exit().
* as.h (EXIT_SUCCESS, EXIT_FAILURE): Moved here.
* as.c: ...from here.
(parse_args): Use them always.
(main): Use exit rather than return.
* Makefile.in (*_FOR_TARGET, INSTALL_XFORM, install, uninstall):
Rewrite handling of program_transform_name.
* configure.in: Test for functions unlink and delete.
* as.h: If unlink isn't available but delete is, define unlink to
be delete.
Update for autoconf 1.118:
* gdbinit.in: New file, created from old .gdbinit.
* .gdbinit: Deleted.
* aclocal.m4 (GAS_GDBINIT): Deleted.
* configure.in: Don't use it. Instead, generate .gdbinit from
gdbinit.in. Don't substitute cpu_type, obj_format, emulation,
atof. Switched order of AC_LINK_FILES arguments. Use AC_PREREQ
to ensure that older versions of autoconf aren't used.
* Makefile.in: Added @configure_input@ line.
(configure): Deleted rule.
Tue Sep 13 12:08:20 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/obj-coff.c (fixup_segment): After handling the difference
of two symbols from the same segment, set fx_subsy to NULL, to
satisfy existing TC_COUNT_RELOC macros.
Tue Sep 13 01:47:08 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* aclocal.m4 (GAS_GDBINIT): New macro.
* configure.in: Use it.
* configure: Regenerated.
Mon Sep 12 20:56:38 1994 Ken Raeburn (raeburn@kr-laptop.cygnus.com)
* .gdbinit (pe, ps): Define new commands.
* symbols.c (indent_level): New static variable.
(indent, print_expr_1, print_symbol_value_1, print_symbol_value,
print_expr): New functions.
* Makefile.in (config-stamp): Add a "this file generated by make"
message to config.h.
PIC implementation for i386-linux, based on code from Eric
Youngdale and Paul Kranenburg, with some work of my own:
* write.c (fixup_segment): Test TC_RELOC_RTSYM_LOC_FIXUP on fixup
before processing same-section pcrel relocations.
(TC_RELOC_RTSYM_LOC_FIXUP): Default to 1.
* expr.c (make_expr_symbol): If operator is O_symbol and
X_add_number is zero, just return the symbol. If operator is
O_constant, resolve the symbol's value before returning.
(operand): Permit use of "[]" for grouping.
(clean_up_expression): For difference of two symbols in the same
frag, add the difference of their offsets into X_add_number.
(expr): Reduce difference of two symbols in same frag to their
difference.
* config/tc-i386.c (TC_RELOC): New macro.
(struct _i386_insn): New field disp_reloc.
(GOT_symbol): New variable.
(operand_special_chars): Added square-brackets and at-sign.
(reloc) [BFD_ASSEMBLER]: Added new argument OTHER; if it is not
NO_RELOC, just return it.
(reloc) [! BFD_ASSEMBLER]: Add third argument to dummy macro.
(BFD_RELOC_386_PLT32, _GOT32, _GOTOFF) [! BFD_ASSEMBLER]: More
dummy macros.
(tc_i386_fix_adjustable): New function. Returns zero if symbol in
fixup is not local, to prevent relocations against externals from
being dropped.
(md_assemble): Initialize disp_reloc field to NO_RELOC. Pass
disp_reloc field to reloc() function, and use TC_RELOC to generate
value to pass to fix_new_exp.
(md_assemble): Change 32-bit reloc against GOT_symbol into a GOTPC
reloc.
(i386_operand): Initialize disp_reloc field to NO_RELOC. Handle
@GOTOFF, @PLT, @GOT operands. For GOTOFF relocations with local
symbols, force generation of the section symbol.
(md_estimate_size_before_relax): If GOT_symbol exists, decide
we're generating PIC code, and convert relocations against
undefined symbols from PCREL to PLT32.
(md_apply_fix_1) [OBJ_ELF]: Fix up values for dynamic-linking
relocs.
(md_undefined_symbol): Notice GLOBAL_OFFSET_TABLE_NAME and set
and return GOT_symbol if it matches.
(F, MAP): Move macro definitions outside function.
(tc_gen_reloc): Only switch on size and pcrel if code wasn't
already supplied as PLT32. GOT32, GOTOFF, or GOTPC. Convert
BFD_RELOC_32 using GOT_symbol into GOTPC.
* config/tc-i386.h (TC_RELOC, tc_fix_adjustable,
TC_RELOC_GLOBAL_OFFSET_TABLE, TC_RELOC_RTSYM_LOC_FIXUP): New
macros.
(NEED_FX_R_TYPE): Define.
(LOCAL_LABEL): Accept ".X" prefix too.
(GLOBAL_OFFSET_TABLE_NAME): Default to "_GLOBAL_OFFSET_TABLE_".
Mon Sep 12 17:51:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/obj-elf.c (obj_elf_type): Rewrite to accept syntax
reportedly to be used on Irix 6.
* config/tc-mips.c (md_pseudo_table): Handle .globl and .global.
(s_mips_globl): New static function; needed for Irix 5 support.
* ecoff.c (ecoff_build_symbols): If BSF_FUNCTION is set for an
external symbol with no type, set the type to st_Proc rather than
st_Global. Don't set the index of an external st_Proc or
st_StaticProc symbol unless it is also a local symbol.
* read.c (read_a_source_file): The second argument to as_where is
unsigned int *, not int *.
Thu Sep 8 17:18:24 1994 Kung Hsu (kung@mexican.cygnus.com)
* config/obj-ecoff.h : Change names to OBJ_GENERATE_ASM_LINENO,
and generate_asm_lineno.
* config/obj-elf.h : ditto.
* read.h : ditto.
* read.c (read_a_source_file): if no file when inst is read, set
generate_asm_lineno to true.
* ecoff.h : change name to generate_asm_lineno and add function
ecoff_no_current_file.
* ecoff.c : change name to generate_asm_lineno.
* ecoff.c (ecoff_generate_asm_lineno) : new function, to generate
ecoff style line for asm file.
Thu Sep 8 19:43:49 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/obj-coff.c (size_section): Do an fprintf to stderr rather
than a printf.
(fixup_segment): Use as_bad_where rather than as_bad.
Wed Sep 7 17:21:12 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* config/tc-{h8300,sh}.[ch] (tc_coff_symbol_emit): Function doing
nothing becomes macro doing nothing.
Wed Sep 7 19:10:09 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* Makefile.in (Makefile): Depend on config.status.
(config.status): Run config.status from . instead of srcdir.
* config/tc-i386.c (tc_gen_reloc): Use bfd_get_reloc_code_name to
display the name of the relocation type that couldn't be handled.
* config/tc-sparc.c (tc_gen_reloc): Likewise.
* config/tc-alpha.c (tc_gen_reloc): Likewise. Deleted abort call
after call to as_fatal.
* configure.in (i386-*-linux*): Don't set bfd_gas.
* Makefile.in (CC_FOR_TARGET, NM_FOR_TARGET, OBJDUMP_FOR_TARGET,
install, uninstall): Don't use "brokensed" hack any more, the new
autoconf code should never let program_transform_name be empty.
Update for autoconf beta 1.112:
* aclocal.m4 (GAS_CHECK_DECL_NEEDED, GAS_WORKING_ASSERT): New
macros.
* configure.in: Use them. Use AC_ARG_PROGRAM (now provided by
autoconf) instead of my hacked-up AC_PROGRAM_TRANSFORM_NAME. Move
test for CROSS_COMPILE just before AC_FUNC_ALLOCA, and emit a
message to try to ease confusion about autoconf's
"cross-compiling" message.
* acconfig.h (NEED_DECLARATION_MALLOC, NEED_DECLARATION_FREE,
NEED_DECLARATION_ERRNO): Renamed from NEED_*_DECLARATION.
* configure, conf.in: Regenerated.
Wed Sep 7 12:49:55 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* configure.in: Check ${host} and ${target} rather than
${host_canon} and ${target_canon}.
* configure: Likewise.
Tue Sep 6 11:42:38 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/tc-mips.c (mips_cpu): New static variable.
(insns_since_cache_access): New static variable.
(md_begin): Set mips_cpu as well as mips_isa.
(append_insn): If mips_cpu is 4600, require four nop instructions
between an instruction which accesses the cache and certain CACHE
instructions. Keep track of the number of instructions seen since
an instruction which accesses the cache.
(md_parse_option): Set mips_cpu as well as mips_isa.
Mon Sep 5 07:09:00 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* doc/Makefile.in (VPATH): Define using @srcdir@.
(prefix, program_transform_name, exec_prefix): Use autoconf style
@-substitutions.
Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
* config/ho-riscix.h, config/tc-arm.c, config/tc-arm.h: New files
* configure.in: Recognize the arm.
Fri Sep 2 16:05:50 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* ecoff.c (add_file): Don't try to generate line numbers if the
symbol table has been frozen.
Thu Sep 1 19:48:01 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* aclocal.m4 (AC_PROG_CC): Use AC_DEFUN, and omit AC_PROVIDE.
* configure.in: Handle user-specified bfd-assembler option with
separate variable from preferred configuration, until the two are
resolved. Indicate bfd_gas=preferred for linux a.out. Use
AC_PROGRAM_TRANSFORM_NAME, for which a patch has been sent to djm.
* Makefile.in (target_alias, program_transform_name): Define,
using autoconf @-substitutions.
Wed Aug 31 17:43:06 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* atof-generic.c: Deleted alloca handling here.
* Makefile.in (prefix, exec_prefix): Use @-subtitutions.
* aclocal.m4 (AC_OUTPUT_LINKS): Deleted redefinition, since
autoconf 1.109 has this fixed.
* configure.in: Don't change quote characters around AC_MSG_ERROR
invocation. Don't use AC_HEADER_STDC, since it requires running a
program. Cache NEED_*_DECLARATION values.
* configure, conf.in: Regenerated with a modified autoconf 1.109.
* as.h (volatile): Don't test or define here; not needed.
(alloca): Replace alloca-conf.h inclusion with code recommended in
autoconf documentation. Include config.h first.
Wed Aug 31 11:20:48 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/obj-coff.h (S_IS_DEFINED): Absolute symbols are defined
also.
* configure.in, configure: Initialize bfd_gas to no.
Tue Aug 30 19:31:14 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* as.h: Include alloca-conf.h from "libiberty", not
"../libiberty".
Mon Aug 29 16:11:30 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/tc-ppc.c (md_apply_fix): Don't generate a reloc when a
symbol is used as an offset into a CSECT that is not a TOC. These
types of loads are generated by gcc -mminimal-toc.
Sun Aug 28 13:22:52 1994 Ken Raeburn (raeburn@rtl.cygnus.com)
* as.h (flag_*): Added comments describing meanings of some of
these variables.
(struct frag): Add some comments about the ns32k-specific fields
and why they're here.
(SIZEOF_STRUCT_FRAG): Cast addresses to char*, not int.
(flag_print_statistics): Declare.
* as.c (parse_args): Set flag_print_statistics instead of
statistics_flag. Options array is now const. Added new option
"dump-config"; if specified, print TARGET_ALIAS, TARGET_CANONICAL,
TARGET_CPU, TARGET_OBJ_FORMAT, and TARGET_FORMAT, if defined.
(main): Change test to check flag_print_statistics.
(statistics_flag): Deleted.
* frags.c (frag_variant): Removed PCREL_ADJUST and BSR arguments.
Always initialize them to zero.
* frags.h (frag_variant): Fixed prototype.
* config/tc-i960.c (get_cdisp): Don't pass the extra zero args.
* config/tc-ns32k.c (convert_iif): Don't pass the arguments; cache
the value of frag_now and fill in the fields later.
* Makefile.in (distclean, realclean): Remove new
configure-generated files.
Sat Aug 27 20:26:12 1994 Ken Raeburn (raeburn@kr-laptop.cygnus.com)
Conversion to autoconf:
* acconfig.h, aclocal.m4: New files.
* configure.in: Rewritten (except for some target-specific code)
for autoconf.
* conf.in, configure: New files, generated from the above.
* Makefile.in: Changed magic sequence indicating insertion of
makefile fragments.
(VPATH, srcdir, CC, LIBS, OBJS dependencies): Use @-substitutions
from configure.
(LINKED_HEADERS): Deleted a.out.gnu.h, a.out.h, and host.h.
(config.status, configure): Rewrite rules.
(config-stamp): Depend on conf. Skip variables that configure is
now substituting itself.
(*.o dependencies): Deleted host.h.
(distclean, realclean): Don't delete host.h.
* as.c: Don't include stdio.h, string.h, sys/types.h. Include
signal.h after as.h.
* as.h: Include alloca-conf.h first. Include ctype.h, string.h,
strings.h, stdlib.h, unistd.h, sys/types.h, fopen-bin.h,
fopen-same.h, as suggested by autoconf test results.
[BROKEN_ASSERT]: Don't include assert.h.
(strdup): Declare.
(volatile, const): Define if not __STDC__ and not already defined.
(malloc, realloc) [NEED_MALLOC_DECLARATION]: Declare.
(free) [NEED_FREE_DECLARATION]: Declare.
* gasp.c: Include config.h, stdlib.h (if HAVE_STDLIB_H). Don't
include host.h.
(malloc) [NEED_MALLOC_DECLARATION]: Declare.
* messages.c: Include as.h first. Include errno.h only if
HAVE_ERRNO_H. If HAVE_VARARGS_H and not __STDC__, undefine
HAVE_STDARG_H. Set NO_STDARG and NO_VARARGS as appropriate.
* doc/Makefile.in (srcdir, INSTALL, INSTALL_PROGRAM,
INSTALL_DATA): Use autoconf @-substitutions.
* input-file.c: Don't include assert.h here, 'cause as.h already
includes it.
* config/tc-alpha.c: Added various prototypes for static
functions.
(in_range): New function, tests whether a value can fit in an
N-bit field.
(build_mem, build_operate_n): New functions for constructing
opcode values.
(emit_sll_n, emit_ldah_num, emit_addq_r, emit_lda_n): New
functions for emitting single instructions, no longer requiring a
recursive call to md_assemble.
(emit_add64): New function for expanding a REG:=REG+CONST
operation into one or more instructions, to handle wide constants.
(clear_insn): New variable.
(md_begin): Fill it in with zeros and BFD_RELOC_NONE values.
(alpha_ip): Use it to initialize local variable insns.
(alpha_ip, label "immediate" and cases 'P', 'G'): Use emit_add64
for calculations.
Fri Aug 26 14:46:15 1994 Ken Raeburn (raeburn@kr-laptop.cygnus.com)
* subsegs.c (section_symbol): Reverse still-wrong test of
EMIT_SECTION_SYMBOLS.
* write.c (BFD_FAST_SECTION_FILL): Always define.
(write_contents): If fill_size is 1, use memset instead of looping
calling memcpy.
Wed Aug 24 12:46:08 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/tc-mips.h (LOCAL_LABEL): Define as 0, for compatibility
with native MIPS assembler.
* configure.in (mips-*-irix*): Don't set emulation.
* config/te-irix.h: Remove.
* ecoff.c (ecoff_symbol_new_hook): Don't add a new file if we
haven't seen any input files yet.
* config/tc-alpha.c (md_begin): Just call symbol_create, rather
than calling symbol_new and then removing the symbol from the
list.
* as.c (main): Move a inside the #if 0 block which uses it.
* ecoff.c (current_stabs_filename): Make const.
* frags.h (frag_align_pattern): Declare.
* gasp.c (new_file): Cast isp to long, and use %ld to print it.
* config/tc-alpha.h (md_operand): Add cast to void.
(alpha_do_align): Declare argument types.
(tc_get_register): Declare.
(alpha_frob_ecoff_data): Declare.
* config/tc-alpha.c: Include <ctype.h>.
(s_mask): Don't declare; does not exist.
(line_comment_chars): Remove /* from descriptive comment.
(tc_get_register): Remove unused local reg.
(tc_gen_reloc): Don't bother to compare unsigned to zero.
(s_base): Correct warning to actually print register number.
(md_begin): Remove unused locals retval, lose, and i.
(alpha_fix_adjustable): Move default case inside switch to avoid
warning.
(load_symbol_address): Remove unused locals reloc_addr, p, sym,
and addend.
(emit_byte_manip_r): Declare types for all arguments.
(emit_extract_r, emit_insert_r, emit_mask_r): Likewise.
(emit_sign_extend, emit_bis_r, s_proc): Likewise.
(alpha_ip): Use sprint_value to print offsetT value. Remove
unused local size. Remove unused label get_macro.
(alpha_do_align): Make fill const.
(md_apply_fix): Remove unused label check_zov.
* configure.in: Recognize i586 as a synonym for i[34]86.
Tue Aug 23 12:32:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/obj-coff.c (c_line_new): Change line_number argument from
unsigned short to int so that the type in the prototype matches
the promoted type in the definition.
(stack_delete): Comment out; not used.
* config/obj-coff.h (tc_coff_symbol_emit_hook): Declare if not
BFD_ASSEMBLER, not if BFD_ASSEMBLER. Declare argument type.
* config/tc-m68k.h (tc_coff_sizemachdep): Declare.
* config/tc-m68k.c (tc_coff_symbol_emit_hook): Add ignored
argument.
Tue Aug 16 01:48:20 1994 Jeff Law (law@snake.cs.utah.edu)
* gas/config/tc-hppa.c (pa_comm): Undo last change. Set sy_frag for
the common symbol to the zero address frag (the correct fix).
Tue Aug 16 01:48:20 1994 Jeff Law (law@snake.cs.utah.edu)
* gas/config/tc-hppa.c (pa_comm): Undo last change. Set sy_frag for
the common symbol to the zero address frag (the correct fix).
* config/tc-hppa.c (pa_comm): Set sy_resolved for the common
symbol.
Fri Aug 12 17:51:48 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/tc-mips.c (md_begin): Drop "el" from the end of
TARGET_CPU. Check for mips64orion.
Tue Aug 9 19:43:45 1994 Stu Grossman (grossman@cygnus.com)
* configure.in: Recognize ppc-*-netware.
* config/te-ppcnw.h: New file to support Power-PC/Netware
configurations. Currently, it just enables the use of backslash
escapes in string directives.
Tue Aug 9 11:12:13 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/tc-ppc.c (ppc_stabx): Call expression directly, rather
than via pseudo_set. If expression is a symbol, move stab symbol
to just after symbol from expression.
* ecoff.c (ecoff_build_procs): Don't force adr of first fdr to be
zero. Undoes change of June 4, 1993.
* config/tc-mips.c (md_parse_option): Accept -mcpu=4400, 4600, and
orion.
Mon Aug 8 16:28:08 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* as.h: Remove FOPEN_WB patch of Aug 6.
* configure.in: Configure for ho-go32 correctly.
* config/ho-go32.h: Fix copyright.
Mon Aug 8 11:59:51 1994 Jeff Law (law@snake.cs.utah.edu)
* gas/config/tc-hppa.c (md_pseudo_table): Delete redundant
upper-case versions of the pseudo-ops.
Mon Aug 8 13:42:16 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/tc-sparc.c (md_apply_fix): If we are going to generate a
non PC relative reloc, don't put the addend in the object file.
Sat Aug 6 01:15:02 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* as.h: If FOPEN_WB is not defined, do the right thing in a go32
environment.
Mon Jul 11 11:34:52 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* config/tc-h8300.c (pint): New function for handling varying
size of int pseudo op.
* doc/as.texinfo: Fix typo describing .h8300h pseduop.
Mon Aug 1 02:40:43 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (create_new_space): Initialize sd_subspaces
field in the space chain.
* config/tc-hppa.c (tc_gen_reloc): Cast return value from
hppa_gen_reloc_type.
Thu Jul 28 15:45:37 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/tc-sparc.c (sparc_ip): Check more carefully for
conflicting architectures.
(md_parse_option) [NO_V9]: Complain if v9 was selected.
(md_show_usage): Derive architecture list in usage message from
architecture_pname array.
(cypress): Macro deleted.
(op_hash): Don't initialize.
(s_common): Use bfd_und_section_ptr instead of bfd_und_section.
* config/tc-sparc.c (BSR): New function.
(sparc_ip): Use it for right-shift operations of 32 bits or more.
* config/tc-sparc.c (sparc_ip): Implement new operand type 'x'.
Tue Jul 26 18:21:24 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/obj-coff.h: Moved common includes and TARGET_FORMAT
definitions together.
(WORKING_DOT_WORD, WARN_SIGNED_OVERFLOW_WORD,
OBJ_COFF_OMIT_OPTIONAL_HEADER, BFD_HEADERS, BFD) [!BFD_ASSEMBLER]:
Moved these definitions to the start of the file, before the
includes.
(SYMBOLS_NEED_BACKPOINTERS, OBJ_COFF_MAX_AUXENTRIES): Always
define these.
(S_GET_ZEROES): Deleted.
(S_SET_ZEROES): Moved to obj-coff.c.
* config/obj-coff.c (obj_coff_* psuedo-op fns): Deleted
forward declarations.
(obj_pseudo_table): Moved to one version end of file,
conditionalized internally.
(stack typedef, stack_init, stack_delete, stack_push, stack_pop,
tag_hash, tag_init, tag_insert, tag_find, tag_find_or_make): Moved
to one combined version at top of file, unconditional. Deleted
forward declarations.
(s_get_name): Moved one copy of declarations to start of file.
(def_symbol_in_progress): Ditto. Don't initialize.
(S_SET_ZEROES): Moved here from obj-coff.h.
(write_object_file): If TC_COFF_SET_MACHINE is defined, call it on
the file headers.
* config/obj-coff.c (seg_info_off_by_4): Now const and static.
(SEG_INFO_FROM_SEG_NUMBER): Unused macro deleted.
(previous_file_symbol, def_symbol_in_progress, symbol_externP,
symbol_extern_lastP, last_functionP) [!BFD_ASSEMBLER]: Don't
bother explicitly initializing to zero value.
* config/obj-coff.c (fixup_segment) [TC_I960]: Use SF_GET_BALNAME
and SF_GET_CALLNAME instead of the TC_S_IS_ versions.
* config/tc-i960.h (TC_COFF_SET_MACHINE): New macro. Calls
tc_headers_hook.
* config/tc-i960.c (targ_has_iclass): Use I_CX | I_CX2 where I_CX
was used previously.
(tc_headers_hook): If I_CX2 is found, set flags to F_I960CA.
* config/tc-i960.c (po_hash): Declaration deleted.
(next_object_file_charP): Ditto.
(regnames, aregs, coj): Now const.
(parse_memop): Static array def_scale now const.
(md_begin): Cast away const when passing hash routines addresses
of values in regnames or aregs.
(md_longopts): Added "link-relax" and "no-relax" hyphenated forms.
Continue to accept one-word forms.
(struct tabentry, arch_tab): Moved to top level from inside
md_parse_option. Now const.
(md_show_usage): Use arch_tab to generate usage message. Print
hyphenated forms of relax options.
* config/tc-i960.h (DEFINE_I960_AOUT, TC_S_IS_*, TC_S_*_SYSPROC,
TC_S_FORCE_TO_*): Moved from here...
* config/tc-i960.c: ... to here. Changed DEFINE_I960_AOUT stuff
to test OBJ_AOUT and OBJ_BOUT directly.
* config/tc-i960.h (CTRL, COBR, COJ, REG, MEM*, FBRA, CALLJ,
M1-M3, REG_OPC, R_*, SFR, LIT, FP, OP, R, RS, RL, RSL, F,
{R,F}{,L}{2,4}, M, SFR_OK, LIT_OK, FP_OK, REG_ALIGN, MEMOP, I_*):
Macros deleted.
* config/tc-i960.c (ARCH_JX): Define.
(arch_tab): Include JX.
(targ_has_sfr, targ_has_iclass): Handle JX.
(tc_headers_hook): Set flags to F_I960JX for i960JX.
Fri Jul 15 15:36:51 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* subsegs.c (section_symbol): Had last change backwards.
Thu Jul 14 13:21:06 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/atof-ns32k.c: Deleted.
* config/obj-aout.c (obj_aout_frob_symbol): Use
bfd_ind_section_ptr and bfd_und_section_ptr.
* subsegs.c (subseg_set_rest): Compare segT values directly,
without casting to int first.
* config/tc-ns32k.c (md_begin): Return value from hash_insert
should be pointer to const. Don't call exit explicitly after
calling as_fatal; it won't return.
(convert_iif): Make local variable j be pointer to bit_fixS, since
that's how it's used.
(encode_operand, case 'b'): Ignore sprintf return value. Don't try
converting freeptr to int and back.
Merged in NS32K support update from Ian Dall (dall@hfrd.dsto.gov.au):
* config/te-pc532mach.h: New file. pc532-mach target emulation.
* config/te-netbsd532.h: New file. Netbsd532 target emulation.
* config/tc-ns32k.h: Add definition of NOP_OPCODE.
* config/tc-ns32k.h: Add prototype for fix_new_ns32k_exp.
* config/tc-ns32k.h: Add BFD_ASSEMBLER support.
* config/tc-ns32k.c (tc_gen_reloc): New function for BFD_ASSEMBLER.
* config/tc-ns32k.c (fix_new_ns32k_exp): Get reloc type
differently for BFD_ASSEMBLER.
* config/tc-ns32k.c (md_estimate_size_before_relax): Get reloc
type differently for BFD_ASSEMBLER.
* config/tc-ns32k.c (md_create_long_jump): Size of opcode is one
not 2.
* config/tc-ns32k.c (md_convert_frag): Code for the BFD_ASSEMBLER
case. Also use smart md_pcrel_adjust function.
* config/tc-ns32k.c (md_apply_fix): Code for the BFD_ASSEMBLER
case. Also use smart md_fix_pcrel_adjust function.
* config/tc-ns32k.c (md_fix_pcrel_adjust): New function which can
find offset from opcode to operand even if in another frag
and in the presence of relaxing.
* config/tc-ns32k.c (md_pcrel_adjust): New function which can
find offset from opcode to operand even if in another frag
and in the presence of relaxing.
* config/tc-ns32k.c (md_number_to_disp): Check ranges properly.
* config/tc-ns32k.c (md_atof): use atof_ieee instead of special
atof_ns32k.
* config/tc-ns32k.c (reloc): New (static) function for
BFD_ASSEMBLER.
* config/tc-ns32k.c (convert_iif): More correct pc relative code.
md_relax must be able to find opcode address even if in another frag.
* config/tc-ns32k.c: More extensive comments.
* config/tc-ns32k.c (encode_operand): Support new operand classes I
and Z. Drop Q.
* config/tc-ns32k.c (fix_new_ns32k_exp): new function and
corresponding prototype.
* config/tc-ns32k.c: make 32532 default machine instead of 32032.
* config/tc-ns32k.c: include opcode/ns32k.h after as.h
* aout_gnu.h: r_disp needs to be 2 bits for TC_NS32K
* write.h: fx_im_disp needs to be 2 bits big for TC_NS32K
* write.c (relax_segment): Use TC_PCREL_ADJUST macro (if defined)
instead of adding pcrel_adjust.
* write.c (write_object_file): Adjust to_addr for the
BROKEN_DOT_WORD feature for the BFD_ASSEMBLER case.
* write.c (write_object_file): Use TC_CONS_FIX_NEW if it is defined.
* write.c (write_contents): Add code (currently if
BFD_FAST_SECTION_FILL is defined) to make large fills a lot faster.
* configure.in: Remove ns32k from special FP list. All the ns32k
series use ieee float.
* configure.in: Add ns32k-pc532-mach and ns32k-pc532-netbsd targets
* as.h: include expr.h before targ-env.h. Some target dependent file
want to use expr structures.
Wed Jul 13 14:49:05 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/tc-m68k.c (m68k_ip): Change rp to be a const pointer.
(md_parse_option): Clear cpu field of current_architecture before
setting a new cpu type. Clear no_68881 for m68881 or m68882.
Clear no_68851 for m68851.
Tue Jul 12 21:27:05 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/ho-sysv.h (realloc): Declare.
* symbols.c (symbol_create): New function, most of the guts of the
old symbol_new function.
(symbol_new): Now just checks symbol_table_frozen, calls
symbol_create, and enters the symbol into the symbol table.
* subsegs.c (section_symbol): If EMIT_SECTION_SYMBOLS is not true,
and the symbol table is frozen, call symbol_create instead of
symbol_new.
* symbols.h (symbol_create, symbol_table_frozen): Declare.
* symbols.c (symbol_clear_list_pointers): Always a function now.
* struc-symbol.h (symbol_clear_list_pointers): Deleted macro
version.
* symbols.c (debug_verify_symchain): New macro, defined to be
verify_symbol_chain or a cast to void, depending on DEBUG_SYMS.
(many functions): Invoke debug_verify_symchain unconditionally.
Tue Jul 12 12:06:42 1994 Kung Hsu (kung@x1.cygnus.com)
* config/obj-ecoff.h: change calling interface of
OBJ_GENERATE_ASM_LINE_STAB.
* config/obj-elf.h: ditto.
* read.c (read_a_source_file): ditto.
* ecoff.h: change calling interface of
ecoff_generate_asm_line_stab.
* ecoff.c (add_file): record of filename to handle case of include
files, also change default built-in type from int to void for
asm file.
* ecoff.c (ecoff_generate_asm_line_stab): handle case of include
files.
Mon Jul 11 17:20:23 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/tc-mips.c (macro): In case M_LA_AB, SVR4_PIC, large
constant, and case ldd_std, set mips_optimize to 2 temporarily to
avoid inserting an unexpected nop instruction.
Sat Jul 9 00:05:12 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* ecoff.c (ecoff_build_lineno): Handle count correctly for last
line number.
Fri Jul 8 15:22:07 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* gasp.c (process_pseudo_op): Pass right args to do do_aif.
(get_any_string): New arg 'pretend_quote'.
(get_and_process, do_formals, macro_expand, do_sdata,
process_pseudo_op): Use new arg.
Fri Jul 8 12:23:44 1994 Kung Hsu (kung@mexican.cygnus.com)
* config/obj-ecoff.h: define macro OBJ_GENERATE_ASM_LINE_STAB.
* config/obj-elf.h: ditto.
* read.c (read_a_source_file): generate line stabs for asm file.
* read.h: add extern generate_asm_line_stab.
* ecoff.h : add prototype for ecoff_generate_asm_line_stab().
* ecoff.c (add_file): if there's no filename provided, set switch
to generate line stabs for .s file.
* ecoff.c (add_procedure): add stabs symbol for .ent directive.
* ecoff.c (generate_ecoff_stab): creates an artificial stabs.
* ecoff.c (generate_asm_line_stab): generate a artifitial label
for each line and generate a stabn for the line.
Thu Jul 7 17:04:03 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* gasp.c (get_any_string): Cope with getting a string with an
alternate base specifier.
(do_aif, do_aelse): Only enable output if expression is true and previous
level was on.
(chartype_init): Add BASEBIT chartype.
(process_pseudo_op): Notice nesteed AIFs.
Thu Jul 7 12:30:22 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* h8300.c (do_a_fix_imm): Code for 2 bit reloc type using in trapa
insn. (fix pr 5165, 5174)
Thu Jul 7 11:31:32 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (R_DLT_REL): If it isn't defined, then define
to an appropriate value to avoid losing on old hpux systems.
* config/tc-hppa.c (hppa_fix_adjustable): Reject reductions for
symbols in DLT relative relocs.
(tc_gen_reloc): Zero out the addend field for DLT relative relocs.
Wed Jul 6 01:07:54 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-ppc.c (ppc_tc): If not OBJ_COFF, force TOC entry to
align to a four byte boundary.
Tue Jul 5 15:42:09 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/tc-alpha.c (load_expression): Handle 32-bit addends.
(gpdisp_hi16_howto): Now points to const.
(load_insn_table, alpha_ip): Fix uses of const.
* doc/internals.texi: Updates to COFF description. Added "@end
defmac" as needed, and some extra heading and "@bye" so it'll
format as a separate document.
Tue Jul 5 13:54:00 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/obj-elf.h (S_GET_ALIGN, S_SET_ALIGN): Define.
* config/obj-elf.c (obj_elf_common): Set alignment of common
symbol.
* config/tc-sparc.c (s_common): If OBJ_ELF, set alignment of
common symbol.
Mon Jul 4 18:29:43 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (is_complex): New macro.
(cons_fix_new_hppa): "Handle" complex expressions.
Fri Jul 1 00:48:12 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-coff.c (write_object_file): Set s_align field from
section_alignment array.
Thu Jun 30 15:05:28 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* write.c (write_object_file): Use bfd_com_section_ptr.
* as.h (absolute_section, undefined_section): Use new BFD macros
bfd_abs_section_ptr and bfd_und_section_ptr.
Thu Jun 30 14:36:37 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* config/tc-mips.c (macro): For M_LI_SS, decide how to handle it
based on contents of imm_expr and offset_expr, rather than
mips_pic. For M_LI_DD, decide how to handle it based on segment
name of offset_expr, rather than mips_pic.
(mips_ip): If g_switch_value < 4, use immediate values for 'l'.
If g_switch_value < 8, use .rdata rather than .lit for 'L'.
Wed Jun 29 17:30:46 1994 Stan Shebs (shebs@andros.cygnus.com)
* as.c (show_usage): Break long string into shorter ones.
(parse_args): Add -v, prints version id and continues.
* config/tc-mips.c (md_show_usage): Break long string.
Mon Jun 27 09:47:16 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
* config/tc-i386.c (md_parse_option): Handle "-V" and "-Q" if
OBJ_ELF is defined.
Sun Jun 26 16:30:48 1994 Stan Shebs (shebs@andros.cygnus.com)
* as.c (main) [HOST_SPECIAL_INIT]: New hook, for host-specific
initialization.
Wed Jun 22 00:24:55 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.h (obj_frob_symbol): Define for OBJ_ELF.
More gas/bfd lossage exposed by the new linker code.
Tue Jun 21 11:32:18 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* subsegs.c (subseg_change): Clear seginfo after allocating it.
(subseg_get): Pass actual size of seginfo to memset.
* subsegs.c (abs_seg_info, und_seg_info): Define if BFD_ASSEMBLER.
(subseg_change): Store seg_info for bfd_abs_section_ptr in
abs_seg_info, and store seg_info for bfd_und_section_ptr in
und_seg_info.
(subseg_get): Likewise. Also, don't set output_section if it is
already set.
(seg_info): Define as function.
* subsegs.h (seg_info): Declare as function rather than defining
as macro.
* write.c (relax_and_size_seg): Call seg_info rather than
bfd_get_section_userdata.
Mon Jun 20 16:30:54 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* configure.in (ppc-*-elf*): New target, like -sysv4*.
* expr.c (operand): If "0f" is followed by '\0', don't do eol
checks.
Mon Jun 20 15:17:43 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
* ecoff.c (ecoff_build_aux): Call swap_tir_out and swap_rndx_out
via backend pointer, not directly.
Fri Jun 17 18:05:06 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* Makefile.in (config-stamp): Make sure there is at least one
element in the for loop.
Fri Jun 17 11:01:04 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c: Misc trivial changes to make gcc -Wall happy.
* config/tc-hppa.h (elf_hppa_final_processing): Declare.
Wed Jun 15 20:44:46 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* as.c (parse_args): Cast xmalloc return value.
* Makefile.in (config-stamp): If $(defs) contains multiple words,
emit a #define line for each.
* configure.in: For sparc64 target, use sparc cpu files and add
sparcv9 to extra_defs. No longer treat sparc64-*-aout* specially.
* config/tc-sparc.c (membar_masks): Now static and const.
(md_show_usage) [!NO_V9]: Add -Av9 to usage message.
(current_architecture) [sparcv9]: Initialize to v9.
(md_begin) [sparcv9]: Don't bother changing it unconditionally
here.
(s_reserve): Don't pass unexpected argument to as_bad with
bad-segment message.
* as.h (bfd_alloc_by_size_t) [BFD_ASSEMBLER]: Declare.
* config/atof-ieee.c (int_to_gen): Commented out unused routine.
* config/tc-vax.c (md_assemble): Removed check of operand section.
Fri Jun 3 17:25:08 1994 Pat Rankin (rankin@eql.caltech.edu)
* config/obj-vms.h (DBG_S_C_COMPLX4, DBG_S_C_COMPLX8): define
these new VMS symbol-type macros for `complex float' and
`complex double' support. Their values come from the existing
DSC$K_DTYPE_FC and DSC$K_DTYPE_DC macros in <descrip.h>.
(DBG_S_C_REAL8_G, DBG_S_C_COMPLX8_G): G_float versions of
REAL8 and COMPLX8; not used yet, because gcc outputs the same
.stabs for `double' regardless of whether `-mg' is used.
* config/obj-vms.c (VMS_typedef_parse) [case 'r']: add entries
for gcc2's predefined types "complex float", "complex double",
and "complex long double" (identical to complex double).
Wed Jun 15 12:32:55 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-coff.c (coff_frob_symbol): Use C_STAT for the .text
section symbol, not C_LABEL.
* config/tc-mips.c (mips_ip): Permit a modifier in 'o' case, and
permit non constant expressions in 'u' case. Lets ``lui
$8,%hi(foo); lw $8,%lo(foo)($8)'' work correctly.
Mon Jun 13 12:08:52 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-aout.c (obj_aout_frob_symbol): Warn about an attempt
to put a common symbol in a set.
Sat Jun 11 16:41:21 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
Add weak symbols as an extension to a.out.
* read.c (pseudo_set): Only preserve external bit for OBJ_AOUT and
OBJ_BOUT if not BFD_ASSEMBLER.
* config/aout_gnu.h (N_WEAKU, N_WEAKA, N_WEAKT, N_WEAKD, N_WEAKB):
Define as in ../include/aout/aout64.h.
* config/obj-aout.h (OBJ_SYMFIELD_TYPE): If not BFD_ASSEMBLER,
define as char.
(S_GET_WEAK, S_SET_WEAK): Define if not BFD_ASSEMBLER.
* config/obj-aout.c (obj_pseudo_table): Add "weak".
(obj_emit_symbols): Adjust type of weak symbols.
(obj_aout_weak): New static function.
Fri Jun 10 13:48:49 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-elf.c (obj_elf_section): Don't set any flags based on
the type of a special section.
* config/ho-sunos.h: Include <stdlib.h>. Don't declare malloc,
realloc, free, or atol.
Wed Jun 8 06:28:37 1994 Bill Cox (bill@cygnus.com)
* Makefile.in (check): Delete as.new dependency, so that
regression test doesn't trigger an assembler build.
Tue Jun 7 13:33:18 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* Makefile.in (mostlyclean, realclean): New targets.
* doc/Makefile.in, testsuite/Makefile.in: Likewise.
Mon Jun 6 13:10:54 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (RDATA_SECTION_NAME): Define.
(macro): Correct M_LI_SS SVR4_PIC/EMBEDDED_PIC case. After M_LI_D
or M_L_DOB or label dob, force a new frag to avoid getting
confused in tc_gen_reloc.
(mips_ip): Use RDATA_SECTION_NAME, not .rdata.
(s_change_sec): Likewise.
Fri Jun 3 23:35:36 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* read.c (emit_expr): Use memset to zero out memory, rather than
going through md_number_to_chars. This permits handling symbolic
arguments when the size is larger than sizeof (valueT), if
TC_CONS_FIX_NEW is prepared to handle the case (as it is on MIPS).
Fri Jun 3 12:50:13 1994 David J. MacKenzie (djm@rtl.cygnus.com)
* as.c (show_usage), config/tc-alpha.c (md_show_usage),
config/tc-mips.c (md_show_usage): Fix up messages.
* as.h: Replace flagseen with separate variables.
* as.c (parse_args): Set them. Don't accept -1 option, or -v
explicitly (it's a synonym for --version).
* as.c, input-scrub.c, messages.c, read.c, symbols.c, write.c,
config/obj-aout.c, config/obj-aout.h, config/obj-bout.c,
config/obj-bout.h, config/obj-coff.c, config/obj-coff.h,
config/obj-vms.c, config/tc-hppa.c, config/tc-i386.c,
config/tc-i960.c, config/tc-m68k.c, config/tc-mips.c,
config/tc-vax.c: Use the new flag variables instead of flagseen.
* config/tc-vax.c [OBJ_VMS]: Recognize -+, -1, -v, and document in
usage.
* as.c (show_usage): Remove target specific messages;
instead, call md_show_usage.
(parse_args): Use getopt_long_only. Take pointers to argc and
argv.
(main): Pass parse_args pointers.
* as.h: Remove 3 variables that are redundant with flagseen.
* as.c, messages.c: Change their users to use flagseen.
Define getopt stuff.
* tc.h: Update md_parse_option decl. Add md_show_usage decl.
* config/tc-*.c: Add md_shortopts, md_longopts,
md_longopts_size, md_show_usage. Change calling convention for
md_parse_option. Remove md_parse_long_option.
* config/tc-ns32k.c: Rename `struct option' to `struct ns32k_option'.
* config/tc-i386.h: Don't define md_parse_option.
Thu Jun 2 13:54:46 1994 David J. Mackenzie (djm@rtl.cygnus.com)
* as.c (show_usage): New function.
(parse_args): Code moved from main.
Recognize --help and --version.
* config/tc-ns32k.h: Define TC_NS32K.
* doc/as.texinfo: Document all of the target-independent command
line options.
Thu Jun 2 12:07:25 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* gasp.c (hash_new_table): Clear newly allocated table.
* config/tc-m68k.c (enum _register): Add 68060 control registers
BUSCR and PCR.
(last_movec_reg): New macro.
(m68000_control_regs, m68010_control_regs, m68020_control_regs,
m68040_control_regs, m68060_control_regs): New arrays.
(control_regs): New pointer.
(m68k_ip): Use control_regs instead of testing CPU every time.
Use last_movec_reg too. In error messages, handle 68060, and
print 68060 for mfloat, too.
(m68k_init_after_args): Handle "68060". Use m68040up for making
m68851 choice. Set control_regs.
(md_parse_option): Handle "68060".
* configure.in: Setting cpu_type, recognize m68060 too.
* config/obj-coff.c (fixup_segment) [!BFD_ASSEMBLER]
[DIFF_EXPR_OK]: Do conversion to pc-relative for difference, even
if pcrel is already set.
* read.c (potable): Add this_gcc_requires_the_gnu_assembler in all
lower-case, in case we're ignoring case of opcodes in the input
file.
* doc/as.texinfo (.section): Document as unavailable for a.out
type formats.
* config/tc-alpha.c (machine): New variable.
(load_insn): New macro.
(load_insn_table): New function.
(md_begin): Call load_insn_table, once for basic instructions and
once for appropriate PAL instruction table.
(md_parse_option): Set `machine' based on -m##### arguments.
* config/alpha-opcode.h (alpha_pal21064_opcodes): Split out from
alpha_opcodes.
(alpha_pal21164_opcodes): New table.
(NUM21064OPCODES, NUM21164OPCODES): New macros.
* configure.in (target i386-*-netbsd0.8): Use 386bsd emulation.
* doc/Makefile.in (install-info-gasp): Use $$dir when installing
file.
Wed Jun 1 10:48:19 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (mips_ip): Force floating point values to be
aligned correctly.
Fri May 27 10:05:53 1994 Ken Raeburn (raeburn@cygnus.com)
Merged in changes from gas-2.3 net release:
* Makefile.in (VERSION): Updated to cygnus-2.3.1.
* config/obj-vms.c: Replaced unchecked uses of malloc with
xmalloc.
* listing.c (list_symbol_table): Only test BFD64, not
BFD_ASSEMBLER too.
* config/obj-coff.c (fixup_segment) [BFD_ASSEMBLER]
[DIFF_EXPR_OK]: Don't check pcrel, just convert it.
* config/obj-vms.c: Removed lots of extra semicolons after
compound statements.
(strchr): Don't declare here.
* config/ho-vax.h (realloc): Declare.
* config/ho-vms.h (strchr, strdup): Declare.
* config/tc-sparc.c (md_parse_option) [OBJ_ELF]: Accept and ignore
option `-q'.
Wed May 18 20:50:35 1994 Pat Rankin (rankin@eql.caltech.edu)
* config/obj-vms.h (DBG_S_C_SQUAD, DBG_S_C_UQUAD): define these
new VMS symbol-type macros; signed and unsigned quadword integers,
for `long long' support. Their values come from the existing
DSC$K_DTYPE_QU and DSC$K_DTYPE_Q macros in <descrip.h>. The
VMS debugger now recognizes `long long' variables correctly.
* config/obj-vms.c (VMS_typedef_parse) [case 'r']: add entries
for gcc2's predefined types "long double" (same as double, as
per gcc's current state), "long long int", "long long unsigned
int", and final `otherwise' case (to avoid uninitialized type
and size fields). [caveat: predefined types "complex int",
"complex float", "complex double", and "complex long double" are
still missing.]
* config/ho-vms.h (EXIT_FAILURE): define as 0x10000002 instead
of 0, because the latter indicates success rather than failure
when passed to `exit' or return from `main' compiled by gcc2.
* config/obj-vms.c (array_suffix, generate_suffix): replace two
hardcoded `0xa3's with macro DBG_S_C_ADVANCED_TYPE from obj-vms.h.
(VMS_typedef_parse): eliminate redundant if-then-else when
allocating new symbol entry and linking it to VMS_Symbol_type_list.
Tue May 17 20:47:31 1994 Pat Rankin (rankin@eql.caltech.edu)
* config/obj-vms.c (Write_VMS_MHD_Records): don't try to interpret
the contents of the GAS_VERSION string when falling back to it for
language processor identification.
* make-gas.com, vmsconf.sh (ENVIRON): fix misspelling of
`psect_attr' in linker options.
Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
* configure.bat: update to latest makefile.in
* config/te-go32.h: [new] go32's environment
Fri May 20 17:59:34 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* as.h: Don't declare parameters for strstr.
Thu May 19 15:40:13 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-sparc.c (md_section_align): Don't change the size if
OBJ_ELF.
Wed May 18 13:08:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* Makefile.in (install): Redirect ln output to /dev/null. If ln
fails on gasp, install gasp.new, not gasp.
Wed May 18 09:16:36 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_ip): Use R_HPPA_ABS_CALL, not R_HPPA for
absolute calls.
Tue May 17 12:50:46 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_parse_fp_cmp_cond): Report an error
on a partial completer match.
Mon May 16 12:03:49 1994 Jeff Law (law@snake.cs.utah.edu)
* config/tc-hppa.c: Change .hppa_unwind to .PARISC.unwind
throughout code.
(is_complex): Delete definition and support for complex relocation
types.
(tc_gen_reloc): Delete special unwind crud for ELF. Simplify and
rewrite ELF code based on 94-02-02 PA ELF draft spec.
(pa_build_unwind_subspace): Use standard PARISC_DIR32 relocs for
the unwind descriptors.
Fri May 6 14:13:15 1994 Steve Chamberlain (sac@cygnus.com)
* config/go32.mh: New makefile fragment for go32 crossing.
* configure.in (host==go32): Use new fragment.
Fri May 6 14:35:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* gasp.c: Include libiberty.h.
(main): Remove unused variable i.
* config/tc-ppc.c (md_begin): When using -many, permit comparison
instructions to appear multiple times in the opcode table.
Thu May 5 19:14:43 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* Makefile.in (VERSION): Update to 2.2.90.
* symbols.c (symbol_new) [BFD_ASSEMBLER]: Don't permit additions
to the symbol table if it's already been set in the output bfd.
(symbol_begin) [! EMIT_SECTION_SYMBOLS] [RELOC_REQUIRES_SYMBOL]:
Don't use bfd_abs_section.symbol for gas absolute symbol.
* doc/Makefile.in (distclean, clean-dvi, clean-info): Delete gasp
files too.
Thu May 5 18:12:51 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (mips_emit_delays): Make call to
mips_no_prev_insn unconditional.
Thu May 5 17:25:38 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/obj-coff*.*: Merged coffbfd versions into coff versions,
with a single "#ifdef BFD_ASSEMBLER" controlling most of it for
now. Deleted obj-coffbfd.* files.
* configure.in: Always use obj-coff.* for COFF targets.
Wed May 4 13:34:11 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/te-dpx2.h (TARGET_FORMAT, REGISTER_PREFIX_OPTIONAL):
Define.
* configure.in (m68k-bull-sysv3*): Enable.
* config/coff_gnu.h: Deleted.
Wed May 4 11:29:17 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-m68k.h (TARGET_FORMAT): If not TE_SUN3, define as
"a.out-zero.big".
* config/obj-coffbfd.c (fixup_segment): Make common symbol and PC
relative adjustments when TE_LYNX is defined as well as when
TC_I386 is defined.
Wed May 4 02:29:21 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* as.h (strstr): Restore declaration.
(subseg_get) [BFD_ASSEMBLER]: Declare.
* write.c (write_object_file): If obj_adjust_symtab is defined,
invoke it. Then call set_symtab, and finally invoke *_frob_file
hooks.
* config/obj-coff.c (coff_adjust_symtab): Renamed from
coff_frob_file.
* config/obj-coff.h (coff_adjust_symtab): Changed declaration
accordingly.
(obj_adjust_symtab): Macro also changed.
* configure.in (i386-*-gnu*): New target, handled like i386-mach.
Tue May 3 21:04:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/obj-coff.h (TARGET_FORMAT) [TC_I960]: Select little
endian version.
* config/obj-coffbfd.h (TARGET_FORMAT) [TC_I960]: Ditto.
* config/obj-coff.c (coff_frob_section): Round up the size of
every section to a multiple of the alignment, so that BFD doesn't
surprise us.
Eliminate many simple differences between the two COFF back ends:
* config/obj-coffbfd.c: Removed all uses of DEFUN and DEFUN_VOID.
Made minor stylistic changes, deleted some register declarations.
(stack_top): Deleted.
(symbol_to_chars): Use absolute_section and reg_section instead of
the corresponding SEG_* symbols.
(obj_coff_endef, tag_find_or_make, fixup_segment): Likewise.
(stack typedef, stack_init, stack_delete, stack_push, stack_pop):
Moved to just after pseudo-op table. All functions now static.
(stack_delete): Removed declaration.
(tag_init, tag_insert, tag_find_or_make, tag_find): Moved to just
after stack functions.
* config/obj-coffbfd.h: Reordered some declarations and macros.
(stack_init, stack_delete, stack_push, stack_pop): Don't declare.
(stack typedef): Deleted.
(SYMBOLS_NEED_BACKPOINTERS): Always undef then define; don't test.
(SYM_AUXENT): New macro.
(SA_GET_*, SA_SET_*): Define in terms of SYM_AUXENT when feasible.
(SF_GET_*, SF_SET_*): Define in terms of SF_GET when feasible.
(SA_GET_SYM_TAGNDX, SA_GET_SYM_ENDNDX, SA_SET_SYM_TAGNDX,
SA_SET_SYM_ENDNDX, object_headers typedef, data_section_header,
text_section_header): Delete non-BFD_HEADERS versions, since we
always define that symbol now.
* config/obj-coff.c (stack_top): Deleted.
(obj_coff_endef, obj_coff_dim, obj_coff_line, obj_coff_size,
obj_coff_scl, obj_coff_tag, obj_coff_type, obj_coff_val): Change
argument name from "ignored" to "ignore".
(obj_coff_val): Use frag_now_fix.
(obj_pseudo_table): Removed IGNORE_DEBUG version, since it doesn't
get used.
(stack typedef, stack_init, stack_delete, stack_push, stack_pop):
Moved to just after pseudo-op table. All functions now static.
(tag_init, tag_insert, tag_find_or_make, tag_find): Moved to just
after stack functions.
* config/obj-coff.h: Reordered some declarations and macros.
Protected against multiple inclusions.
(stack_init, stack_delete, stack_push, stack_pop): Don't declare.
(stack typedef): Deleted.
(SYMBOLS_NEED_BACKPOINTERS): Always undef then define; don't test.
(stdoutput): Deleted declaration.
(TARGET_FORMAT) [TC_I386]: Don't define if already defined.
Mon May 2 17:09:24 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* subsegs.h (segment_info_type): Use fix_tail field even if
BFD_ASSEMBLER.
* subsegs.c (subseg_change): Initialize fix_tail field.
(subseg_get): Likewise.
* write.c (frags_chained): New static variable.
(fix_new_internal): If frags_chained is set, use fix_root and
fix_tail from seg_info (now_seg), rather than frchain_now.
(chain_frchains_together_1): Set fix_tail field.
(chain_frchains_together): Set frags_chained.
Thu Apr 28 01:39:15 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* config/tc-mips.c (s_option): Only refer to g_switch_* variables
if GPOPT is defined.
(s_abicalls): Ditto.
(md_apply_fix): Cast char* to unsigned char* to avoid pointer
mismatch.
Wed Apr 27 11:06:32 1994 Steve Chamberlain (sac@cygnus.com)
* configure.in (i386-*-go32): Uses coff now.
* gasp.c (main): Now takes -D on command line.
(show_usage): Describe new options.
Tue Apr 26 17:10:30 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* listing.c (list_symbol_table): Print "NO DEFINED SYMBOLS" and
"NO UNDEFINED SYMBOLS" if there aren't any, instead of displaying
the header with an empty list.
* config/obj-coffbfd.c (fill_section): Check COFF_NOLOAD_PROBLEM
also before setting STYP_NOLOAD for .bss section.
* config/tc-m68k.c (flag_reg_prefix_optional): New variable.
Initialized to value of REGISTER_PREFIX_OPTIONAL, if defined, or
zero.
(m68k_reg_parse): If flag_reg_prefix_optional is set, permit
register prefix to be absent.
(m68k_ip_op): Accept `&' also for immediate constants.
(insert_reg): Don't bother with (two!?) sanity checks of the
symbol table when inserting each register.
(m68k_parse_long_option): New function. Set
flag_reg_prefix_optional if "register-prefix-optional" is passed.
* config/tc-m68k.h (REGISTER_PREFIX): Always define if not already
defined.
(OPTIONAL_REGISTER_PREFIX): Don't define.
(REGISTER_PREFIX_OPTIONAL): If not already defined, define as zero
or one depending on M68KCOFF.
Some changes to help Apollo support, from troy@cbme.unsw.edu.au:
* config/tc-m68k.c (DATA, ADDR, SP, FPREG, COPNUM, BAD, BAC):
Define as macros instead of enumerators, since the Apollo compiler
can't handle "enumVal1, enumVal2 = enumVal1" when defining an enum
type.
(make_pcrel_absolute) [NO_PCREL_RELOCS]: New function.
(tc_coff_fix2rtype) [NO_PCREL_RELOCS]: Generate only R_RELBYTE,
R_DIR16, and R_DIR32 relocs.
* config/tc-m68k.h [TE_APOLLO] (COFF_MAGIC, COFF_AOUTHDR_MAGIC):
Use Apollo versions.
[TE_APOLLO] (OBJ_COFF_OMIT_OPTIONAL_HEADER): Undefine. That is,
do include the optional header for Apollo target.
(COFF_MAGIC): Don't define as MC68MAGIC if it's already defined.
* config/tc-m68k.h [TE_DELTA] (LEX_PCT): Define as 1, so that `%'
can be used within a label name.
* config/tc-m68k.h (m68k_init_after_args): Declare.
(tc_init_after_args): Define as m68k_init_after_args.
* config/tc-m68k.c (m68k_init_after_args): New function,
containing one-shot code from md_assemble. Added warning for
combination of 68040 and 68851.
(md_assemble): Startup-time code deleted.
Mon Apr 25 16:19:17 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* doc/Makefile.in (clean, distclean): Remove asconfig.texi.
Sun Apr 24 00:13:08 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_ip): 13 bit immediate constant (for break
instruction) is unsigned.
Fri Apr 22 17:58:22 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-ecoff.c (ecoff_frob_file): Use bfd_ecoff_set_gp_value
and bfd_ecoff_set_regmasks to set the GP value and the register
masks, rather than using the now obsolete fake .reginfo section.
Fri Apr 22 15:17:06 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* listing.c (list_symbol_table): Don't print register symbols as
undefined.
* config/obj-coff.c (obj_symbol_new_hook): Don't need to strip
underscores, since symbol_new will already have done it.
* config/obj-coffbfd.c (obj_symbol_new_hook): Ditto.
* as.c (main): If tc_init_after_args is defined, invoke it after
all arguments have been processed.
Some changes to help Apollo support, from troy@cbme.unsw.edu.au:
* as.c (perform_an_assembly_pass) [TE_APOLLO]: Create .wtext
section instead of .text. Call create_target_segments.
* read.c (demand_copy_string): No longer static.
Thu Apr 21 15:50:04 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (append_insn): Permit branches to be switched
with the preceding instruction even if .set nobopt has been seen.
.set nobopt actually controls whether to bring up an instruction
from the branch target, which gas does not currently support.
Wed Apr 20 18:46:14 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/obj-coff.h, config/obj-coff.c: Deleted all code used only
when BFD_ASSEMBLER is not defined, and all conditionals relating
to such code. No such targets remain.
Fixes for stabs-in-coff:
* config/obj-coff.c: Include subsegs.h.
(coff_frob_section): New function.
(obj_coff_init_stab_section): New function.
* config/obj-coff.h (obj_coff_init_stab_section,
coff_frob_section): Declare.
(obj_frob_section): New macro; uses coff_frob_section.
(INIT_STAB_SECTION): New macro; uses obj_coff_init_stab_section.
* config/tc-sparc.c (md_section_align): Always round up to
multiple of alignment power specified in bfd target vector.
* gasp.c: Include ctype.h.
Mon Apr 18 21:08:01 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* doc/Makefile.in, doc/as.texinfo: Renamed asdoc-config.texi to
asconfig.texi.
* doc/Makefile.in (install-info-as, install-info-gasp): Get file
names from source directory without pathname.
* config/obj-vms.c (VMS_write_object_file): While looking for
register mask, skip empty fill frags caused by enabling listing
output.
* config/ho-sysv.h: Include string.h.
* doc/internals.texi: New (well, recently added) file. Just added
info on as_warn and friends.
Mon Apr 18 14:28:22 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_parse_space_stmt): Use the built-in
defaults for defined, private, and spnum fields for the
$TEXT$ and $PRIVATE$ spaces. Do not clobber spnum. Do
not reset the segment if just updating a space.
(pa_spaces_begin): Set BFD section flags for all built-in
subspaces.
Fri Apr 15 10:51:51 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* ecoff.c (first_proc_ptr): New static variable.
(add_procedure): Set first_proc_ptr if it hasn't been set.
(ecoff_build_lineno): If the first procedure does not start at
address zero, insert a dummy line to compensate.
* Makefile.in (bootstrap, bootstrap2, bootstrap3): Make gasp.new
as well as as.new.
Thu Apr 14 15:12:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* expr.c (operand): Try to parse "0f" and "0b" sequences as
floating point and binary numbers respectively; if it doesn't
work, treat them as local labels.
* Makefile.in: Make $(OBJS) depend on $(ALL_OBJ_DEPS).
* configure.in: Set ALL_OBJ_DEPS in output Makefile.
Based on suggestions from <BAILEY@hmivax.humgen.upenn.edu>
(Charles Bailey):
* vmsconf.sh: In generated file, get ".obj" suffix right, build
source files from other directories into objects in the current
directory, and specify PSECT attributes explicitly to linker.
Also added missing label.
* Makefile.in (stamp-mk.com): Reference new variable
VMS_OTHER_OBJS for list of non-local object files, instead of
listing them here.
(VMS_OTHER_OBJS): New variable, added more libiberty files.
* make-gas.com: Regenerated.
* config/ho-vms.h (unlink): Define as delete.
* config-gas.com: Fix quoting on TARGET_CANONICAL definition.
Delete files before creating them.
Thu Apr 14 13:34:24 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* Makefile.in (de-stage1, de-stage2, de-stage3): Use rm -f.
* config/tc-mips.h (DIFF_EXPR_OK): Define.
* config/tc-mips.c (macro_build): Permit BFD_RELOC_PCREL_LO16 for
certain cases of 'i', 'j' and 'o'. Change 'u' to take an
argument, the reloc type.
(load_register): Pass reloc type to macro_build for 'u'.
(macro): Likewise. For M_LA_AB permit a difference expression
when generating embedded PIC code between an arbitrary symbol and
a symbol in the .text section.
(mips_force_relocation): Force BFD_RELOC_PCREL_HI16_S and
BFD_RELOC_PCREL_LO16 to be emitted.
(md_apply_fix): Check that most relocs are not PC relative.
Handle BFD_RELOC_PCREL_HI16_S and BFD_RELOC_PCREL_LO16.
(tc_gen_reloc): Change #error to as_fatal. Handle
BFD_RELOC_PCREL_LO16 and BFD_RELOC_PCREL_HI16_S.
Tue Apr 12 18:25:13 1994 Stan Shebs (shebs@andros.cygnus.com)
* subsegs.c (subsegs_begin): Call memset with args in the correct
order.
(subseg_get): Clear newly allocated seginfo, set its pointer slots
to NULL instead of 0.
Mon Apr 11 09:00:57 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_procend): Handle case where label was
defined after the .proc directive.
* config/tc-hppa.c (pa_procend): Give an error if we encounter a
procend for a procedure without a name.
Thu Apr 7 14:28:30 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (macro): Pass NULL for expression argument to
macro_build for nori case.
(SWITCH_TABLE): Define.
(mips_force_relocation): Force a relocation for a switch table
entry.
(md_apply_fix): Write switch table entry value into file.
(tc_gen_reloc): Use BFD_RELOC_GPREL32 for a switch table entry,
and set the addend to the difference between the reloc address and
the subtrahend.
Thu Apr 7 10:38:18 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.h (elf_tc_symbol): Delete. No longer used.
(elf_tc_make_sections): Likewise.
(hppa_tc_make_sections, hppa_tc_symbol): Delete extern decls.
* config/tc-hppa.c (hppa_tc_make_sections): Delete function.
(hppa_tc_symbol): Likewise.
* config/obj-elf.c (elf_frob_file): Delete elf_tc_symbol and
elf_tc_make_sections stuff. It was there to support PA braindamage
which has been fixed, and in the case of elf_tc_make_sections is
redundant with elf_tc_final_processing.
Wed Apr 6 20:48:30 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* configure.in (hppa*-*-*elf*): Don't require "-hp-" for the
manufacturer.
Tue Apr 5 15:48:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (mips_ip): For case 'o', when generating
embedded PIC code, accept the difference between two local symbols
as being constant.
(mips_force_relocation): Only force a reloc to be generated for a
PC relative fixup.
(md_apply_fix): For BFD_RELOC_32 and BFD_RELOC_LO16, put the fixup
value into the file if the fixup will not generate a reloc.
Tue Apr 5 11:14:14 1994 Ken Raeburn (raeburn@rtl.cygnus.com)
* config/tc-sparc.c (s_reserve): If section passed isn't bss,
don't spew remainder of input file in error message.
(tc_gen_reloc): If bfd_reloc_type_lookup returns null, print error
message with reloc type and try to process remainder of file.
* doc/Makefile.in (install-info-as, install-info-gasp): New
targets, now explicitly checking $(srcdir) for info files.
(install-info): Depend on both of them; do nothing more.
Mon Apr 4 17:06:04 1994 Jeffrey A. Law (law@cygnus.com)
* config/tc-hppa.c (tc_gen_reloc): Fix thinko in ELF version.
Mon Apr 4 12:39:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-ppc.c (ppc_insert_operand): Check PPC_OPERAND_SIGNED
flag rather than signedp field. Only permit extended range if
PPC_OPERAND_SIGNOPT flag is set and assembling in 32 bit mode.
Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
* config/tc-ppc.c (ppc_size): New static variable.
(ppc_arch): Check for PPC_OPCODE_PPC before PPC_OPCODE_POWER.
(md_begin): If an instruction has a size specific flag set, only
add it if we are assembling that size.
Thu Mar 31 16:51:16 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-sparc.c (tc_gen_reloc): Add a gruesome hack to get
cross section PC relative relocs right for COFF and ELF.
Mon Mar 28 14:38:23 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/obj-coff.h (SEPARATE_STAB_SECTIONS): Always define.
(OBJ_PROCESS_STAB): Don't define.
Mon Mar 28 12:40:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-aout.c (obj_aout_frob_symbols): Don't let BFD clobber
the type of symbol set symbols which happen to be in the absolute
or undefined section.
Mon Mar 28 12:35:00 1994 David Edelsohn (edelsohn@npac.syr.edu)
* config/tc-ppc.c (md_parse_option): Add -mpwrx (POWER/2 aka
RIOS2), -mpwr (POWER aka RIOS1), -mppc (PowerPC aka MPC603/604),
and -many (all architectures).
Sun Mar 27 14:04:19 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (tc_gen_reloc): Set addend for relocation
involving a function symbol which is not a plabel to zero.
(md_apply_fix): Never pass a function symbol to field_adjust.
Fri Mar 25 17:35:49 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-aout.c (obj_aout_frob_symbol): If N_EXT is set for an
N_INDR symbol, set BSF_EXPORT and clear BSF_LOCAL.
* config/tc-mips.c (append_insn): If EMBEDDED_PIC, don't swap a
branch with an instruction that uses $at, in case the branch is
later expanded.
(macro): If EMBEDDED_PIC, case M_JAL_A may use $at.
(md_pcrel_from): If not OBJ_AOUT, return 4 for an undefined symbol
to make it pcrel_offset.
(tc_gen_reloc): If not OBJ_AOUT, set the reloc addend to
reloc->address; another gruesome hack to get gas reloc handling to
do the right thing.
Thu Mar 24 21:29:29 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/tc-alpha.c (alpha_ip): Only set GP prolog size if using
PV register.
(T12): New macro.
(emit_insn): New function.
(md_assemble): Call it.
(alpha_force_relocation): Handle BFD_RELOC_26, for call_pal
instructions.
(lituse_pending): New variable. Set by anything that generates a
LITERAL reloc, cleared by anything that generates a LITUSE reloc,
tested by code that might want to emit a LITUSE reloc.
(emit_unaligned_io): New function. Currently calls md_assemble,
but it should eventually be converted to generate the insn itself
and call emit_insn directly.
(emit_load_unal, emit_store_unal, emit_byte_manip_r,
emit_extract_r, emit_insert_r, emit_mask_r, emit_sign_extend,
emit_bis_r): Likewise.
(alpha_ip, case 'I'): Handle with BFD_RELOC_23.
(alpha_ip, label get_macro): Don't emit the final instruction if
the opcode is zero.
(alpha_ip, case 'B', subcase 'd'): New case, for subword and
unaligned memory access macros.
(md_apply_fix): Handle BFD_RELOC_26. Generate an error message if
the value can't be resolved.
Wed Mar 23 16:06:08 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (md_parse_option): For -membedded-pic, force
the -G value to 0x7fffffff. For SVR4 PIC options, don't call
bfd_set_gp_size here, it's done in md_begin. Don't permit -G with
-membedded-pic.
(mips_force_relocation): New function.
(md_apply_fix): Set fixP->fx_done appropriately.
(s_change_sec): For EMBEDDED_PIC, change .data and .rdata to
.sdata.
* config/tc-mips.h (TC_FORCE_RELOCATION): Define.
(mips_force_relocation): Declare.
(TC_HANDLE_FX_DONE): Define.
Tue Mar 22 13:58:37 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (enum mips_pic_level): New enum.
(mips_pic): Change from int to enum mips_pic_level. Change all
uses (0 becomes NO_PIC, 2 becomes SVR4_PIC).
(load_address): Handle EMBEDDED_PIC.
(macro): Handle EMBEDDED_PIC in all PIC cases.
(md_parse_option): Accept -membedded-pic to use EMBEDDED_PIC. If
OBJ_ELF, accept -KPIC and -call_shared to use SVR4_PIC and accept
-non_shared to use NO_PIC (this is how the Irix 5 assembler
works). Do not permit -G with SVR4_PIC.
(s_abicalls): Warn if -G was used, and force -G 0.
(tc_gen_reloc): Set reloc->addend to 0 for a PC relative reloc for
anything but a.out, not just for ELF. For ECOFF, don't generate a
BFD_RELOC_16_PCREL_S2 reloc unless using EMBEDDED_PIC.
* config/obj-ecoff.h (obj_sec_sym_ok_for_reloc): Define to be 1.
Sun Mar 20 16:31:55 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (create_new_space): Use ints, not chars as
parameters to avoid losing when compiling with HP CC.
(create_new_subspace, update_subspace, fix_new_hppa): Likewise.
Sun Mar 20 14:43:14 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* Makefile.in (config-stamp): If `defs' is defined, emit a
preprocessor directive to create a macro named by this value into
config.new; don't explicitly go for BFD_ASSEMBLER.
* configure.in: Define `defs', not `BFDDEF'. Set it to
MANY_SEGMENTS for any obj-coffbfd target.
* config/obj-coffbfd.h (BFD_HEADERS, BFD): Define.
* config/i386coff.mt (TDEFINES): Don't define BFD, MANY_SEGMENTS,
or BFD_HEADERS.
(LOCAL_LOADLIBES): Deleted.
* config/m68kcoff.mt (TDEFINES): Don't define those macros.
* config/m88kcoff.mt (TDEFINES): Ditto.
* config/ebmon29k.mt: Deleted.
* config/h8300hds.mt: Deleted.
* config/ic960coff.mt: Deleted.
* config/sparc.mt: Deleted.
* config/h8300.mt (LOCAL_LOADLIBES, TDEFINES): Deleted.
* config/h8500.mt (LOCAL_LOADLIBES, TDEFINES): Deleted.
* config/sh.mt (LOCAL_LOADLIBES, TDEFINES): Deleted.
* config/z8k.mt (LOCAL_LOADLIBES): Deleted.
(TDEFINES): Don't define the coffbfd macros.
* Makefile.in: Insert makefile fragments before OBJS definition.
(OBJS): Add $(TE_OBJS).
* config/obj-coff.c (obj_pseudo_table): Supply "section"
unconditionally.
* write.c (set_symtab): Define only if BFD_ASSEMBLER.
Sun Mar 20 12:06:05 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* Makefile.in (STAGESTUFF): Add gasp.new.
Fri Mar 18 20:09:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* write.c (symbol_table_frozen): New variable, to be set after
bfd_set_symtab is called.
(dump_section_relocs): Note whether a symbol is a section symbol
or not.
(adjust_reloc_syms): For now, always supply an absolute symbol for
fixups without symbols but not yet `done'. Use section_symbol to
get the symbol, instead of going directly for abs_symbol.
(write_relocs) [DEBUG4]: Abort if any symbol referred to by a
reloc is not a section symbol and is not in the symbol table.
(set_symtab): New function, broken out from write_object_file.
Counts symbol table instead of relying on an earlier count.
(write_object_file): Call set_symtab, but do it after potentially
invoking the *_frob_file macros. Don't bother counting symbols.
Call symbol_remove, instead of expanding it in place. Moved the
conditionalized `object_file_size' declaration down to
conditionalized block where it's used. When using the absolute
symbol for a fixup without a symbol, set sy_used_in_reloc.
(write_object_file) [BFD_ASSEMBLER]: Call section_symbol to get
the correct symbol for the absolute section.
* subsegs.c (section_symbol): Use symbol_new instead of
symbol_make, since we may want it to go into the symbol table.
Make the new symbol have internal linkage. If
obj_sec_sym_ok_for_reloc says it's okay, use the BFD section
symbol with the newly created GAS symbol.
(obj_sec_sym_ok_for_reloc): Default to always returning 0.
* config/obj-aout.h (obj_sec_sym_ok_for_reloc) [BFD_ASSEMBLER]:
New macro.
* config/obj-elf.h (obj_sec_sym_ok_for_reloc): New macro.
* config/tc-sparc.c: Include subsegs.h.
(in_signed_range): New function.
(sparc_ip): Use it.
(sparc_ip, case 'i'): Use BFD_RELOC_SPARC13, not _BASE13.
(sparc_ip, label "immediate"): Reject constants for pcrel
instructions only if the relocation type indicates a "call"
instruction and the offset is within range of a "jmpl %g0". If
it's not in range, use the absolute section symbol plus an offset.
(md_apply_fix): Use in_signed_range. Combined _SPARC13 and
_BASE13 cases.
(tc_gen_reloc): Permit BFD_RELOC_SPARC13.
* config/ic960coff.mt (TDEFINES): Fixed typo (MANY_SECTIONS, not
MANY_SEGMENTS).
* configure.in: Eliminated all targets using obj-coff but not
defining BFD_ASSEMBLER; I think all such targets that are
supported will be matched by real CPU-OS combinations earlier in
the case statement.
(targets *-*-coff*, *-sysv*, *-*-sco*, *-*-sysv32): Deleted. Made
some comments about the dpx2 configuration, but left it disabled,
since it couldn't be reached before.
(target a29k-amd-ebmonold): Deleted.
Thu Mar 17 13:36:09 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_import): Correctly handle importing of an
already defined symbol.
Wed Mar 16 17:11:37 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (mips_ip): Only accept overly large values for
the 'j' operand if there are no further alternatives for this
instruction.
* config/obj-coffbfd.c (adjust_stab_section): Initialize
stabstrseg to SEG_UNKNOWN, not -1. After loop, check whether it
is not SEG_UNKNOWN rather than checking whether it is >= 0.
* config/tc-mips.c (mips_align): Take new argument, label, and use
it instead of global insn_label.
(s_align, s_cons, s_float_cons, s_gpword): Save insn_label before
call to mips_emit_delay and pass it to mips_align.
Wed Mar 16 11:54:12 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_equ): Handle both .reg and .equ correctly.
* config/tc-hppa.c (pa_callinfo): Accept "millicode" as an
argument to a .callinfo directive. Don't loop forever on errors.
* config/tc-hppa.c (pa_equ): Use pa_parse_number so that we can
use pre-defined registers as arguments.
Mon Mar 14 14:29:45 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* write.c (write_object_file): Check both S_IS_LOCAL and
S_IS_EXTERNAL when deciding whether to discard a symbol.
* config-gas.com: Scan Makefile.in, not version.c, for current
version number. Delete all versions of temp files when finished
with them. Create config.h.
* config/obj-vms.c (VMS_Initialized_Data_Size): Cache symbol
values to reduce number of lookups with S_GET_VALUE. Skip debug
symbols to avoid "a really nasty bug". (From Holger Teutsch,
holger@botbso.rhein-main.de.)
(VMS_write_object_file): For "__vt.*" symbols, set S_GET_OTHER
field. (Also from Holger Teutsch.) Watch for a would-be register
mask that spans frags.
* config/obj-coffbfd.c (obj_coff_line): Set symbol lnno field with
this_base, not line_base. (Patch from Andreas Arens,
ari@obelix.av.rwth-aachen.de.)
* config/obj-aout.c (obj_crawl_symbol_chain): Retain symbols that
look local if they're exported or undefined. Used to be done for
i960 only.
* read.c (s_lcomm, s_comm): Print symbol name being redefined.
Get it from the looked-up symbol, instead of using the string from
the input stream, which is no longer null-terminated.
(LEX_PCT): New macro, defaults to 0.
(lex_type): Use it for `%'.
* config/tc-vax.c (md_parse_option): Handle `-h#' option for VMS.
(vip_op): Now static, and returns void. Callers changed. Added
forward decl.
(vip): Ditto. Call as_fatal directly if a program bug is
detected.
(op_hash): Let default initialization suffice.
* Makefile.in (literal.o): Provide dependencies.
* configure.in: Set new makefile variable OPCODES_LIB.
* Makefile.in (LIBS): Use it.
* Makefile.in (make-gas.com, stamp-mk.com): New targets.
* vmsconf.sh: New file.
* make-gas.com: Regenerated from new script.
* configure.in (sparc*-*-lynxos*): Handle any version number
suffix after "lynxos". Set emulation to lynx.
Mon Mar 14 11:30:49 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* config/obj-coff.c (obj_coff_section): Delete declaration.
Fri Mar 11 22:25:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-ppc.c (md_pcrel_from): Return 0 for undefined ELF
symbols.
(ppc_is_toc_sym): Change .toc to .got.
(md_apply_fix): Change handling of ELF relocs.
(tc_gen_reloc): Likewise.
Fri Mar 11 17:42:20 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/obj-vms.c (Close_VMS_Object_File): Add comment pointing
out some code that doesn't belong in this file.
* config/obj-vms.h: Include aout/stab_gnu.h.
(N_GSYM, ..., N_LENG): Deleted.
(NO_RELOC): Undefine before defining as part of enum reloc_type.
* config/tc-alpha.c: Add comment questioning need for all the
characters in FLT_CHARS.
* as.c (main) [OBJ_VMS]: Don't call output_file_close.
* config/obj-ecoff.c (ecoff_frob_file): Set strict order for
sections with recognized names, before computing VMA values.
Fri Mar 11 17:56:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (mips_ip): Accept numbers between 0x8000 and
0xffff for 'j' to be compatible with MIPS assembler. These
numbers are actually treated as negative.
Thu Mar 10 13:36:29 1994 Doug Evans (dje@canuck.cygnus.com)
* config/tc-sparc.h (LOCAL_LABEL): Local labels are .Lfoo.
Tue Mar 8 21:17:12 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/obj-coff.c: Minor formatting/stylistic changes, plus:
(obj_coff_section): Declare.
(obj_pseudo_table): Make it available only if MANY_SECTIONS.
(obj_symbol_to_chars) [CROSS_COMPILE]: Some attemps to make this
work. It still doesn't. It now fails to compile, instead of
silently compiling to do nothing.
* config/obj-coff.h (SEPARATE_STAB_SECTIONS): Define only if
MANY_SECTIONS.
(OBJ_PROCESS_STAB) [! MANY_SECTIONS]: New macro, just emits
warning.
Handle Alpha load-immediate-FP pseudo-instructions:
* config/alpha-opcode.h (ldif, ldig, ldis, ldit): New patterns.
* config/tc-alpha.c (lit8_sec, lit4_sec, lit8_sym, lit4_sym): New
variables.
(create_literal_section): New function.
(create_lita_section): Now a macro.
(get_lit8_offset, get_lit4_offset): New functions.
(maybe_set_gp): New function.
(select_gp_value): Call it.
(load_expression): Preserve addend if symbol is a section symbol.
(alpha_ip): Handle new operand type `F' for floating-point
constants; store them in .lit{4,8} sections.
(alpha_ip, case 'G'): Emit LITUSE relocations for symbol exprs.
* config/tc-i386.c (smallest_imm_type): Never return Imm1.
Tue Mar 8 14:18:15 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* config/obj-coffbfd.c (w_strings): Only copy strings out if
their symbols are going to be written.
Tue Mar 8 11:49:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* messages.c (as_perror): Declare arguments const.
* as.h (as_perror): Change declaration.
Mon Mar 7 16:08:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (load_address): When calling frag_grow, allow
for the (up to) two nops which may be inserted by append_insn if
mips_optimize is 0.
(macro): Likewise.
Thu Mar 3 11:37:55 1994 Doug Evans (dje@canuck.cygnus.com)
* config/atof-ieee.c (make_invalid_floating_point_number):
Add cast to avoid warning from gcc.
Wed Mar 2 10:31:01 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c: Add a few casts to make HP C compiler happy.
* config/obj-som.c (obj_som_version, obj_som_copyright): Be
prepared
to handle an error from bfd_som_attach_aux_hdr.
* config/tc-hppa.h: Wrap ELF specific decls inside an ifdef.
Mon Feb 28 15:03:26 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/tc-alpha.c (md_atof): Omit warning about FP values.
(line_comment_chars): Add ! to list.
(md_apply_fix): Do process 32- and 64-bit relocations.
* config/obj-coffbfd.c (obj_coff_lcomm): Put "#if 0" around the
unused parts (most of the function).
(obj_coff_init_stab_section): Cast alloca result.
* configure.in (i960-*-coff, i960-*-vxworks5.*): Use coffbfd, and
gas_target ic960coff.
* config/ic960coff.mt: New file.
* config/obj-coffbfd.h [TC_I960]: Include coff/i960.h.
(TARGET_FORMAT) [TC_I960]: Use coff-Intel-little.
* config/te-ic960.h (CROSS_COMPILE): Don't undef this. We'll
always build little-endian object files.
* config/tc-i960.c (md_reloc_size): Don't define at all if BFD or
BFD_ASSEMBLER is defined.
(mem_fmt): Since COFF doesn't handle callx relocations yet, treat
them like normal 32-bit relocations.
(md_apply_fix): For callx relocations, store zero.
(tc_bout_fix_to_chars): Store symbol index for all callx
relocations, regardless of link-relax setting.
(tc_coff_fix2rtype, tc_coff_sizemachdep): New functions.
(i960_handle_align) [! OBJ_BOUT]: If link-relax option is
selected, print an error message and clear it.
* config/tc-i960.h (BFD_ARCH, COFF_FLAGS, COFF_MAGIC,
TC_COUNT_RELOC, TC_COFF_FIX2RTYPE, TC_COFF_SIZEMACHDEP,
tc_fix_adjustable): New macros.
(tc_coff_fix2rtype, tc_coff_sizemachdep): Declare.
Fri Feb 25 20:56:57 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (hppa_tc_symbol): Call PA ELF BFD version.
(hppa_tc_make_sections): Likewise.
(pa_build_symextn_section): Delete unused function.
(hppa_tc_make_symextn_section): Likewise.
(pa_export): Delete call to pa_build_symextn_section.
* config/tc-hppa.h (hppa_tc_symbol): Add extern decl.
(elf_hppa_final_processing): Delete extern decl.
(hppa_tc_symbol): Delete extern decl.
Fri Feb 25 13:15:31 1994 Ian Lance Taylor (ian@cygnus.com)
* config/obj-coffbfd.c (fill_section): Correct test for whether to
fill a section (from Minh Tran-Le <TRANLE@intellicorp.com>).
Thu Feb 24 11:30:26 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* configure.in: Don't require version number for i386-*-mach.
* read.c (potable): Added ".this_GCC_requires_the_GNU_assembler",
which is ignored by gas, but will cause other assemblers to choke.
Intended for use by gcc ports that require gas instead of native
assemblers.
Thu Feb 24 07:10:31 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/ho-hppaosf.h: Fix braino in test for ANSI-C.
Wed Feb 23 16:51:43 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* write.c (write_contents): Give the user a reasonable error
message rather than "assertion failed" if bfd_set_section_contents
fails.
Tue Feb 22 10:07:32 1994 Ken Raeburn (raeburn@rtl.cygnus.com)
* config/ho-mach3.h: New file.
Mon Feb 21 11:41:18 1994 Ian Lance Taylor (ian@cygnus.com)
* ecoff.c (ecoff_build_debug): Don't set hdr->magic here. It is
now set in bfd/ecofflink.c:ecoff_write_symhdr.
* config/obj-coffbfd.c (write_object_file): use bfd_get_error (),
not bfd_error.
* config/obj-elf.c (elf_frob_file): Likewise.
* read.c (s_lcomm): Use an alignment power of 3 for 8 byte .lcomm
variables.
* config/ho-hpux.h (BROKEN_ASSERT): Define if not __GNUC__.
* read.c (read_a_source_file): Use correct arguments to memcpy
(broken 19 Jul 1993). From kjd@pescadero.stanford.edu (Kenneth
Duda).
Sun Feb 20 18:01:54 1994 Ian Lance Taylor (ian@lisa.cygnus.com)
* config/obj-coff.h (obj_coff_section): Declare.
* config/obj-coff.c (obj_pseudo_table): For "section", use
obj_coff_section.
(obj_coff_section): Rewrite.
Fri Feb 18 14:16:32 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* configure.in (i386-*-mach3*): New target; uses BFD.
* config/te-mach.h: New file.
* config/obj-aout.c (obj_aout_frob_file): New function.
* config/obj-aout.h (obj_aout_frob_file): Declare it.
(frob_file): New macro.
* config/tc-i386.c (md_apply_fix_1) [TE_Mach]: Don't adjust
pcrel32 relocations.
* config/tc-i386.h (TARGET_FORMAT) [TE_Mach]: Use a.out-mach3.
* write.c (write_object_file): Removed register declarations.
Thu Feb 17 16:25:18 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
Some support for PowerPC ELF.
* configure.in: If cpu is powerpc*, use ppc.
(ppc-*-sysv4*): Use object format elf.
* config/tc-ppc.h: Only declare a number of things if OBJ_COFF is
defined.
(TARGET_ARCH): Make it call ppc_arch.
(ppc_arch): Declare.
(TARGET_FORMAT): Set based on OBJ_COFF or OBJ_ELF.
(NO_STRING_ESCAPES): Define.
(LOCAL_LABEL, FAKE_LABEL_NAME): Define for OBJ_ELF.
* config/tc-ppc.c: Only define a number of functions of OBJ_COFF
is defined.
(md_pseudo_table): Most pseudo-ops are OBJ_COFF specific. Added
OBJ_COFF specific "bi" and "ei".
(md_parse_option): Fix handling of -u. Make -m601 set
PPC_OPCODE_601. If OBJ_ELF, accept -V and -Q.
(ppc_set_cpu): New function.
(ppc_arch): New function.
(md_begin): Call ppc_set_cpu.
(ppc_insert_operand): For a signed operand accept an unsigned
value, for IBM compatibility.
(ppc_byte): Don't call stringer for strings; instead, treat two
double quotes as a single double quote.
(ppc_comm): Set sy_tc.output for a .lcomm symbol.
(ppc_biei): New function.
(ppc_tc): If not OBJ_COFF, ignore first argument.
(ppc_fix_adjustable): Call as_bad_where, not as_bad.
(ppc_is_toc_sym): New function.
(md_apply_fix): Use ppc_is_toc_sym. Handle BFD_RELOC_16 and
BFD_RELOC_8.
Thu Feb 17 09:29:37 1994 David J. Mackenzie (djm@thepub.cygnus.com)
* messages.c (as_perror) [BFD_ASSEMBLER]: Use bfd_get_error and
bfd_set_error and new error names.
Tue Feb 15 20:23:20 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* configure.in: Support i960-vxworks versions > 5.0 as coff.
Default is still bout if no version is specified.
* atof-generic.c (atof_generic): Use switch and strcasecmp instead
of large number of compares when looking for inf/nan values.
Fri Feb 11 13:13:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (macro): Do unaligned loads and stores
correctly when big endian, and give errors on overflow rather than
generating incorrect code.
Thu Feb 10 11:24:20 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* as.c: Include libiberty.h.
* read.c (do_align): Don't define label just_record_alignment
unless it might be used.
* as.c (main): If md_parse_long_option is defined, call it with a
long option.
* config/tc-mips.h (md_parse_long_option): Define.
* config/tc-mips.c (mips_trap): New static variable.
(md_begin): Report an error if mips_trap is set at ISA level 1.
(macro): If mips_trap, use trap instructions instead of break
instructions for overflow and divide by zero detection.
(mips_parse_long_option): New function. Support --trap,
--no-break, --break and --no-trap.
* doc/as.texinfo: Document new options.
* read.c (potable): Add "zero".
* config/tc-i386.c (md_pseudo_table): Remove "zero".
* config/tc-m88k.c (md_pseudo_table): Likewise.
Thu Feb 10 01:24:27 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/tc-sparc.c (sparc_ip): Reject integer values for
pc-relative operand fields. This forces "call 0" to become "jmpl
%g0,%o7" with no relocations needed.
Wed Feb 9 13:08:32 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* as.h (xmalloc, xrealloc): Declare using PTR rather than char *.
* xmalloc.c (xmalloc, xrealloc): Use PTR rather than char *.
* app.c (do_scrub_next_char): If NO_STRING_ESCAPES is defined,
don't treat backslash specially inside strings.
* read.c (next_char_of_string): Likewise.
Wed Feb 9 09:42:45 1994 Stan Shebs (shebs@andros.cygnus.com)
* config/obj-coffbfd.c (obj_coff_init_stab_section): Use memset
instead of memcpy to zero the initial stab symbol, duh.
* config/obj-elf.c (obj_elf_init_stab_section): Ditto.
* config/obj-som.c (obj_som_init_stab_section): Ditto.
Tue Feb 8 17:25:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* write.c (fixup_segment): Use as_bad_where, not as_bad.
* subsegs.c (subseg_set_rest): Call memset with the arguments in
the right order. Explicitly clear fix_root and fix_tail fields.
Tue Feb 8 16:00:25 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/obj-coff.c (coff_frob_symbol): For abs_symbol, set *punt
and do nothing else.
* symbols.c (symbol_begin): Initialize value of abs_symbol
properly.
* write.c (adjust_reloc_syms): Use abs_symbol instead of calling
section_symbol.
* ecoff.c (ecoff_build_debug): Fix "/*" in comment to silence
complaint from "gcc -Wall".
* configure.in (alpha-*-netware*): New target, like alpha-*-osf*.
* config/tc-alpha.c (GP_ADJUSTMENT): Move definition to start of
file.
(tc_gen_reloc): Remove uninitialized variable `code', and code
that tried to use it (incorrectly). For LITERAL reloc, set addend
to negative of GP value.
(load_symbol_address): Don't adjust return value by GP_ADJUSTMENT.
* write.c (write_relocs): Print some sensible error message if
bfd_perform_relocation returns bfd_reloc_overflow.
Mon Feb 7 15:49:24 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* configure.in (hppa*-*elf*): New configuration for PA ELF.
(hppa*-*-osf*): Default object format is SOM.
Mon Feb 7 16:07:35 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/tc-alpha.c (md_atof): Warn that floating-point values
might not assemble properly.
* configure.in (target alpha-*-osf*): Don't set "dev=yes" any
more.
* config/tc-alpha.c (load_expression): Parenthesize operations in
range checking, to avoid precedence questions.
* config/tc-alpha.c (addr32): New static variable.
(md_parse_option): Set it for "-32addr".
(load_symbol_address): If addr32 is set, use ldl instead of ldq.
* atof-generic.c (atof_generic): Calculate maximum_useful_digits
and more_than_enough_bits_for_digits in integer arithmetic, to
eliminate the only sources of dependence on floating point
support, which doesn't work yet on the Alpha.
Mon Feb 7 03:56:05 1994 Ken Raeburn (raeburn@cambridge.cygnus.com)
* ecoff.c (ecoff_build_debug) [TC_ALPHA]: Specify version stamp as
0x30b for Alpha for now, until ".verstamp" is handled.
* literal.c (add_to_literal_pool): Use seginfo->frchainP, which
actually refers to the literal pool section, rather than
frchain_now, which refers to whatever section the assembler was
in.
* write.c (fixup_segment): Only do range checking if size of fixup
is smaller than word size. Otherwise, we always wind up with
zeros.
* config/tc-alpha.c (md_section_align): Change second argument and
return type to valueT, to agree with tc.h.
(alpha_do_align): Local static array nop_pattern is now unsigned
char, to avoid overflow warnings.
* config/tc-alpha.h (md_section_align): Delete declaration.
* config/obj-ecoff.c (ecoff_frob_file): Ensure that ecoff_data for
output bfd is non-null before indirecting through it.
* config/tc-alpha.c (alpha_frob_ecoff_data): Renamed from
alpha_frob_file.
* config/tc-alpha.h (tc_frob_file): Macro deleted.
* config/obj-ecoff.c (ecoff_frob_file) [TC_ALPHA]: Call
alpha_frob_ecoff_data, then fill in optional-header info with gp
value and register masks.
Sun Feb 6 16:13:47 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* configure.in (hiux): Fixes from m-kasahr@sramhc.sra.co.JP.
* config/obj-som.c (obj_som_init_stab_section): Same change
as coffbfd and elf below. Zero the initial stab symbol after
allocating it.
Sat Feb 5 12:30:32 1994 Stan Shebs (shebs@andros.cygnus.com)
* config/obj-coffbfd.c (obj_coff_init_stab_section): Zero the
initial stab symbol after allocating it.
* config/obj-elf.c (obj_elf_init_stab_section): Ditto.
Sat Feb 5 11:53:31 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_ip): addb[tf] should only accept
non-negated condition completers. Add support for addb pseudo-op
which accepts both negated and non-negated completers.
Sat Feb 5 00:15:49 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* configure.in (rs6000*): Use cpu_type ppc.
(ppc-*-aix*): New target; use coff and force bfd_gas.
* config/tc-ppc.h, config/tc-ppc.c: New files for PowerPC/POWER
(RS/6000) support. At the moment, only XCOFF is supported.
* config/obj-coff.c (SA_SET_SYM_ENDNDX): Made non-static.
(S_SET_DATA_TYPE): Likewise.
(coff_last_function): Renamed from local static last_functionP in
coff_frob_symbol and made externally visible.
(coff_frob_symbol): New local static set_end; use it to try to
avoid calling SA_SET_SYM_ENDNDX on a symbol that will be punted.
* config/obj-coff.h (S_SET_DATA_TYPE): Declare.
(SA_SET_SYM_ENDNDX): Declare.
(coff_last_function): Declare.
* expr.c (operand): If DOLLAR_DOT is defined, accept `$' as
equivalent to `.' to mean the current location.
* read.c (LEX_BR): If not defined, define as 0.
(lex_type): Use LEX_BR as the type of `{',`}',`[',`]'.
* symbols.c (symbol_new): If tc_canonicalize_symbol_name is
defined, call it with preserved_copy_of_name. If
tc_symbol_new_hook is defined, call it on the new symbol.
(symbol_find_base): If tc_canonicalize_symbol_name is defined,
call it on a copy of the name argument.
* write.c (write_object_file): Simplified usage of obj_frob_symbol
and tc_frob_symbol. Always call both if the symbol is going to be
output.
* write.c (relax_segment): Use %ld rather than %d when printing
fragP->fr_var, and cast it to long.
Changed relocs to be based on subsegments (when BFD_ASSEMBLER).
* subsegs.h (struct frchain): If BFD_ASSEMBLER, added new fields
fix_root and fix_tail.
(segment_info_type): If BFD_ASSEMBLER, don't define fix_tail
field.
* write.c (fix_new_internal): If BFD_ASSEMBLER, set fix_rootP and
fix_tailP based on frchain_now, not seg_info (now_seg).
(chain_frchains_together_1): Chain the subsegment relocs together.
* subsegs.c (subseg_change): Don't clear fix_tail field.
(subseg_get): Likewise.
* literal.c (add_to_literal_pool): Look through the relocs via
frchain_now, not seginfo.
Thu Feb 3 23:07:30 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-ecoff.h (TARGET_SYMBOL_FIELDS): Changed
ecoff_undefined to ecoff_extern_size.
* config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS): Likewise.
* config/tc-mips.c (s_extern): Set ecoff_extern_size to the
external symbol size, rathern than setting the symbol value.
(md_estimate_size_before_relax): Check both ecoff_extern_size and
symbol value to see if GP referencing can be used.
* ecoff.c (ecoff_symbol_new_hook): Clear ecoff_extern_size, not
ecoff_undefined.
(ecoff_frob_symbol): Don't check ecoff_undefined.
(ecoff_build_symbols): Get size of an undefined symbol from
sym->ecoff_extern_size, not S_GET_VALUE (sym).
Wed Feb 2 13:55:08 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* Makefile.in: Avoid bug in losing hpux sed.
Wed Feb 2 11:40:11 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (file_mips_isa): New static variable.
(md_begin): Set it.
(s_mipsset): Add support for .set mipN to set the ISA level.
* gasp.c (kinfo): Fully bracket initializer.
Tue Feb 1 19:28:12 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* gasp.c (malloc): Don't declare, since host.h or system header
files may declare it differently.
* config/atof-ieee.c (int_to_gen): Now static.
* config/ho-i386aix.h: Include sys/types.h and stdlib.h, not
ho-sysv.h. Based loosely on a patch from Minh Tran-Le.
Tue Feb 1 10:50:17 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* gasp.c: Include host.h.
Tue Feb 1 12:13:01 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (mips_ip): Make an unsupported instruction a
warning, not an error.
* config/obj-coff.c (dot_text_symbol, dot_data_symbol,
dot_bss_symbol): Don't define if BFD_ASSEMBLER.
(obj_symbol_to_chars): bfd_coff_swap_aux_out now takes more
arguments.
(coff_line_base): Renamed from line_base. Changed all uses.
(coff_add_linesym): Renamed from add_line_sym. Made non-static.
Changed all uses.
* config/obj-coff.h: If TC_PPC, include coff/rs6000.h.
(S_SET_STORAGE_CLASS, S_GET_STORAGE_CLASS): Declare if
BFD_ASSEMBLER.
(coff_line_base): Declare.
(coff_add_linesym): Declare if BFD_ASSEMBLER.
* config/obj-coffbfd.c (symbol_to_chars): bfd_coff_swap_aux_out
now takes more arguments.
Mon Jan 31 17:55:14 1994 Stan Shebs (shebs@andros.cygnus.com)
* as.c (statistics_flag): Renamed from quiet_flag.
(main): Get statistics with --statistics instead of -noquiet.
Mon Jan 31 07:19:30 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* Makefile.in: Support for Gnu ASsembler Preprocessor.
* gasp.c: New file.
* read.c (s_lcomm): Align lcomm data.
* config/tc-z8k.c (tc_reloc_mangle): Don't allow subtraction
from different sections.
Sun Jan 30 14:58:26 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* write.c (write_object_file): If tc_frob_file is defined, call it
just before calling obj_frob_file.
* config/tc-alpha.c (alpha_gp_value): Renamed from gp_value
(references changed), and made non-static.
(getExpression): Return void.
(select_gp_value): Abort if gp_value is non-zero. Delete call to
non-existent bfd_set_gp_value.
(alpha_validate_fix): Function deleted.
(alpha_frob_symbol): Function deleted.
(alpha_local_label): Function deleted.
(alpha_frob_file): Renamed from alpha_end.
* config/tc-alpha.h (alpha_frob_symbol, alpha_validate_fix,
alpha_local_label, alpha_end): Declarations deleted.
(alpha_gp_value, alpha_frob_file): Declare.
(tc_frob_symbol, TC_VALIDATE_FIX, md_end): Macros deleted.
(LOCAL_LABEL): Move code here from tc-alpha.c:alpha_local_label.
(md_convert_frag): Simplified slightly.
(tc_frob_file): New macro.
* read.c (do_align): New function, most of guts of s_align_*
functions. Look for md_do_align macro, give it a chance to bypass
all but recording of section alignment.
(s_align_bytes, s_align_ptwo): Call do_align.
(s_lcomm) [TC_ALPHA]: Align object to largest power of two that
divides object size.
* frags.c (frag_align_pattern): New function.
(frag_align): Rewrite for clarity.
* config/tc-vax.c (md_assemble): Handle O_constant expression.
(vip_begin): Returns pointer to const char. Cast hash_insert arg
to PTR to avoid compiler complaints about const.
(md_begin): Local variable errtxt must point to const.
* configure.in: Handle host vax-*-ultrix* like vax-*-bsd*. Don't
bother with *-*-ultrix or *-*-sysv*, except *-*-sysv, since only
the last has an existing host support file. Do handle vax-bsd and
vax-ultrix targets.
Fri Jan 28 11:26:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-coff.c (obj_coff_section_header_append): Do not
declare if BFD_ASSEMBLER.
(stack_pop): Correct test for stack underflow.
(obj_coff_endef, obj_coff_dim, obj_coff_line, obj_coff_size,
obj_coff_scl, obj_coff_tag, obj_coff_type, obj_coff_val): Declare
type of ignored argument to avoid gcc warning.
(align): Removed unused function.
Thu Jan 27 18:14:19 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/tc-alpha.c, config/tc-alpha.h, config/alpha-opcode.h: New
files, based on port of gas-1.38 contributed by CMU, using a.out
variant. Updated for gas-2.x and ECOFF. Floating-point constants
are still broken, bootstrap testing incomplete.
* literal.c: Comment changes.
* listing.c (listing_source_file): Check for null listing_tail
before indirecting through it.
* expr.h (struct expressionS): Added struct tag.
* as.h: If __GNUC__ and inline are both undefined, define inline
away.
* write.c (cvt_frag_to_fill): Don't assume that fr_var for
rs_align or rs_org frags will be 1.
(relax_segment): For rs_align, if fr_var is not 1, complain if
required padding is not a multiple of the size of the pad pattern.
(fixup_segment): Leave gp-relative relocations alone. For pcrel
relocations referring to the same segment, clear fx_pcrel when
clearing fx_addsy.
* as.h: Adjust comments on rs_align.
* atof-generic.c: Some reformatting.
(atof_generic): Be careful when mixing signed/unsigned values of
different sizes.
* write.c, config/obj-{aout,bout,coff*}.c, config/tc-sparc.c:
Query the fx_done field instead of fx_addsy to see if the fixup
still needs to be applied. Set fx_done and clear fx_addsy both,
for now. If TC_HANDLES_FX_DONE isn't defined, assume md_apply_fix
will only clear fx_addsy, and set fx_done accordingly after
returning.
* config/tc-sparc.h (TC_HANDLES_FX_DONE): Define.
* config/tc-sparc.c (md_apply_fix): Set fx_done for non-pcrel fix
with no fx_addsy.
* symbols.c (dot_text_symbol, dot_data_symbol, dot_bss_symbol):
Deleted.
(symbol_begin): Moved to end of file, so function inlining can
work better.
(fb_label_count, fb_label_max): Default C static initializers are
sufficient.
* symbols.h (dot_text_symbol, dot_data_symbol, dot_bss_symbol):
Declarations deleted.
* config/obj-coff.c (dot_text_symbol, dot_data_symbol,
dot_bss_symbol): Defined here, static.
* config/obj-aout.c [BFD_ASSEMBLER]: Undef NO_RELOC before
including aout/aout64.h.
* write.c (write_object_file): If EMIT_SECTION_SYMBOLS is false,
don't write out a section symbol even if it's used in a
relocation; assume relocations will handle section numbers
somehow. Rename "punt_it" label to "punt_it_if_unused" to reflect
it's true use.
(EMIT_SECTION_SYMBOLS): Default to 1.
(adjust_reloc_syms): Don't create a new symbol for an absolute
reference; just use the absolute section symbol.
(write_relocs): Make printout of reloc values dependent on flag
DEBUG3, not DEBUG2.
* config/obj-aout.h (EMIT_SECTION_SYMBOLS): Define as 0.
* config/obj-ecoff.h (EMIT_SECTION_SYMBOLS): Ditto.
Thu Jan 27 16:43:51 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* read.c (lex_type): No longer make '{' a valid character for
symbol names.
* as.c (main): Print long values using %ld.
* messages.c (as_warn_internal): New static function.
(as_warn, 3 versions): Use as_warn_internal.
(as_warn_where, 3 versions): New function.
* as.h (as_warn_where): Declare.
Tue Jan 25 18:30:34 1994 Stan Shebs (shebs@andros.cygnus.com)
* as.c (quiet_flag): New flag.
(main): If -noquiet given, display execution time and memory used.
Tue Jan 25 15:53:11 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* doc/{all.texi,as.texinfo}: Add documentation for HPPA port.
Mon Jan 24 19:18:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* ecoff.c (ecoff_frob_symbol): New function. Put undefined
symbols of known size in the undefined section. Put small common
symbols in a .scommon section.
* ecoff.h (ecoff_frob_symbol): Declare.
* config/obj-ecoff.h (obj_frob_symbol): Define.
* config/obj-elf.c (obj_elf_write_symbol_p, obj_elf_write_symbol,
obj_elf_frob_symbol): Removed unused functions.
* config/obj-elf.h (obj_frob_symbol, obj_write_symbol): Removed
unused macros.
(obj_elf_frob_symbol, obj_elf_write_symbol): Removed declarations
of unused functions.
(obj_frob_symbol): Define if ECOFF_DEBUGGING.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-mips.c (g_switch_seen): New static variable.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
(md_parse_option): Set g_switch_seen for -G option.
(s_option): If creating PIC code, force the GP size to be 0. Warn
if -G switch used with a non-zero value.
* symbols.c (S_IS_COMMON): Use bfd_is_com_section rather than
comparing against bfd_com_section.
Mon Jan 24 14:12:25 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* read.c (s_lcomm): Treat Alpha like MIPS in handling of .sbss
section.
Thu Jan 20 13:17:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* expr.c (operand): For floating point operand with unusual fp
char from FLT_CHARS, preserve the character. Patch from Lisa
Repka.
Wed Jan 19 23:15:24 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (md_pseudo_table): Add all data allocation
pseudo-ops: .hword, .int, .long, .octa, .quad, .short, .single.
Tue Jan 18 15:51:59 1994 Steve Chamberlain (sac@jonny.cygnus.com)
* config/obj-coffbfd.c (obj_coff_endef): For C_EFCN, C_BLOCK and
C_FCN assume .val has been set to .
Tue Jan 18 16:19:58 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c: Disable multiple $CODE$ subspace code. It
confuses GDB for some unknown reason.
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-som.c: Likewise.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Tue Jan 18 19:05:32 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* literal.c (add_to_literal_pool): Handle duplicates of values
already written to literal pool.
Tue Jan 18 17:23:52 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-aout.c (obj_aout_frob_symbol): Try to get symbols
with explicitly marked stabs through BFD: if a symbol marked
N_UNDF | N_EXT is in the absolute section, move it to the
undefined section; move a symbol marked N_INDR into
bfd_ind_section and set the BSF_INDIRECT flag; set the
BSF_WARNING flag for a symbol makred N_WARNING.
Mon Jan 17 15:40:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* ecoff.h (ecoff_set_gp_prolog_size): Declare.
* ecoff.c (ecoff_set_gp_prolog_size): Return type is void.
Mon Jan 17 00:18:55 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_ip): Explicitly check for comma before 'u'
and 'f' template operand.
* config/tc-hppa.c (pa_ip): Handle 'N', 'O', 'o', '0', '1', 'u',
and '2' in copr and sfu instruction templates.
Sun Jan 16 16:44:23 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* as.h (subseg_force_new): Add prototype.
Sat Jan 15 09:20:55 1994 Doug Evans (dje@canuck.cygnus.com)
* app.c (do_scrub_next_char): Allow lines like " foolab :".
* read.c (emit_expr): Fix computation of mask.
* config/obj-elf.c (obj_elf_section): Fix loop termination test.
Thu Jan 13 16:15:15 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* ecoff.c (ecoff_set_gp_prolog_size): New function.
(current_file_idx): New static variable.
(add_file): Use and increment current_file_idx instead of indx
parameter.
* struc-symbol.h (struct symbol): Make all bitfields unsigned.
* config/tc-i960.c (i960_validate_fix): Added argument
add_symbolPP. Indirect through it to get "add_symbolP".
* config/tc-i960.h (i960_validate_fix): Supply prototype.
(TC_VALIDATE_FIX): Pass address of add_symbolP.
* configure.in (i386-*-netbsd*): New target, using te-netbsd.h.
(i386-*-netbsd0.8): New target, like 386bsd.
* configure.in: Set BFDDEF in Makefile to "define" or "undef".
* Makefile.in (config.h): Protect against multiple inclusions.
Define or undef BFD_ASSEMBLER as specified by $(BFDDEF).
(ALL_CFLAGS): Omit $(BFDDEF).
* as.h: Include config.h.
(struct symbol): Added forward declaration.
(add_to_literal_pool): Fix declaration.
* as.c: Don't include config.h.
* literal.c (add_to_literal_pool): Take symbol and addend as
arguments, instead of expression, for now. Fix calculation of
offset to return.
* subsegs.h (segment_info_type) [NEED_LITERAL_POOL]: Add field
literal_pool_size.
Thu Jan 13 12:14:21 1994 Jeffrey A. Law (law@snake.cs.utah.edu
* subsegs.c (subseg_get): Accept new argument "force_new". If
set then a new segment is always created. All callers changed.
(subseg_force_new): New function. Similar to subseg_new, but
always force a new segment to be created.
* config/obj-som.c (som_frob_file): Call adjust_code_sections
for each section.
(adjust_code_sections): New function. Adjusts the VMA for all the
$CODE$ subspaces.
* config/tc-hppa.c (md_assemble): Also handle creating a fixup
for the unwind descriptors if a function's label follows the
.PROC and .ENTRY directives.
(pa_entry): Don't set BSF_FUNCTION for the label symbol here; it
is done elsewhere. Don't create a fixup for the unwind
descriptors if the function's label has not been defined yet.
(pa_proc): For SOM, place each procedure within a new $CODE$
subspace. Adjust the segment and frag for the associated
function label if it exists.
Wed Jan 12 22:05:33 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (hppa_fix_struct): Add new "segment" field.
(hppa_fix_new): Initialize segment field.
(md_apply_fix): Do nothing for pc-relative fixup which involves
crossing a segment boundary.
(pa_procend): Undefine the current label after handling .PROC
and .PROCEND directives.
(dummy_symbol): Make type "symbolS *". Change references as
appropriate.
Wed Jan 12 13:29:31 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* read.c (read_a_source_file): Cast array argument to unsigned
char.
* write.c (adjust_reloc_syms): Remove unused variable symseginfo.
(write_object_file): Don't define punt_it if it won't be used.
(fixup_segment): Don't define skip if it won't be used.
* config/tc-mips.h (TARGET_FORMAT): Define as mips_target_format.
(mips_target_format): Declare.
* config/tc-mips.c (mips_target_format): Define with appropriate
default definition.
(md_parse_option): If -EL or -EB is used, change byte_order and
mips_target_format as appropriate.
Tue Jan 11 21:52:36 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* app.c (do_scrub_next_char): Another attempt to fix bugs
dealing with labels without colons (for HPPA and MRI).
Tue Jan 11 17:01:06 1994 Doug Evans (dje@canuck.cygnus.com)
* config/tc-sparc.c (sparc_ip): Truncate args to %hi/%lo to 32 bits.
* expr.c (integer_constant): Fix computation of too_many_digits.
Variable digit_2 renamed to start. Fix check for whether number
will fit in 32 bits.
* read.c (emit_expr): Use valueT instead of long.
Tue Jan 11 13:01:20 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-elf.c: If TC_MIPS, include elf/mips.h.
(special_sections): Define.
(obj_elf_special_section): Get default types and attributes from
list of special sections.
* config/tc-mips.c (ELF_TC_SPECIAL_SECTIONS): Define.
* config/obj-ecoff.c (ecoff_frob_file): Force .sdata and .sbss
sections to be close together.
* config/tc-mips.c (macro): Corrected $at warnings in a couple of
spots.
* listing.c (listing_prev_line): New function.
* listing.c: Include subsegs.h.
(listing_prev_line): New function.
(calc_hex): Reset byte_in_frag to zero for each new frag.
* config/tc-mips.c (append_insn): Call listing_prev_line after
emitting nop instructions.
* Makefile.in (listing.o): Depends upon subsegs.h.
Mon Jan 10 09:52:23 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_ip): Put check for missing label on .PROC
here. Handle case where label may be defined after the .PROC.
(pa_proc): It is not an error if the procedure's label isn't
defined before the .PROC directive.
Sun Jan 9 04:43:30 1994 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* config/te-netbsd.h: New file.
* config/tc-i386.h (TARGET_FORMAT) [TE_NetBSD]: Use bfd target
a.out-netbsd-386 for this configuration.
Fri Jan 7 17:38:28 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* ecoff.c (ecoff_stab): Don't clobber the ECOFF symbol information
with the associated stabs information.
(ecoff_build_symbols): Never set the type of stabs symbols to
st_Global. Don't update the symbol index or ifd if the gas symbol
is not the same as the ECOFF symbol (which is now the case for
stabs symbols).
Fri Jan 7 11:14:07 1994 Stan Shebs (shebs@andros.cygnus.com)
* config/tc-mips.c (macro): Add a LOSING_COMPILER ifdef that
splits the function.
(macro2): New function, if LOSING_COMPILER defined.
Fri Jan 7 09:38:25 1994 Steve Chamberlain (sac@cygnus.com)
* config/obj-coffbfd.c (fill_section): Don't ever fill past the
end of a section. (write_object_file): Temporary fix - setup
stdoutput.
Thu Jan 6 18:05:21 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/tc-sparc.c (tc_gen_reloc): Fix handling of addends in
non-pcrel_offset relocations.
Thu Jan 6 01:06:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (mips_ip): Warn about using $1 as well as $at
without .set noat.
Wed Jan 5 14:22:22 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
* literal.c: New file.
* Makefile.in (REAL_SOURCES, OBJS): List it.
* as.h (DEBUG): Don't define.
(struct expressionS, struct fix): Declare in case they're used in
prototypes.
(add_to_literal_pool) [BFD_ASSEMBLER]: Declare.
* config/tc-mips.h (TARGET_FORMAT) [OBJ_AOUT]: Fix for new names
in bfd.
* subsegs.c (subseg_get): New function. Creates segment if
needed, returns pointer, but doesn't change current segment.
(subseg_new): Use it.
Tue Jan 4 15:12:43 1994 Stan Shebs (shebs@andros.cygnus.com)
* Makefile.in (INCLUDES): Add $(srcdir)/.. to places to search.
* config/obj-ecoff.c: Include files as "bfd/" instead of "../bfd/".
* app.c, flonum.h, hex-value.c (const): Change #if to be more
portable.
Tue Jan 4 22:11:34 1994 Rob Savoye (rob@darkstar.cygnus.com)
* config/ho-vsta.h, configure.in: Add support for VSTa
micro-kernel.
Thu Dec 30 15:27:16 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* write.c (write_relocs): bfd_perform_relocation now takes an
additional argument, to return an error string (which we ignore).
Wed Dec 29 14:37:26 1993 Ken Raeburn (raeburn@cujo.cygnus.com)
* write.h (struct fix): Field tc_fix_data should be type PTR, not
void*, for compatibility with non-ANSI compilers. Added
single-bit field "fx_done".
Sun Dec 26 14:31:47 1993 Torbjorn Granlund (tege@adder.cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-hppa.c (pre_defined_registers): Convert to lower case.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Delete spurious register names "%r4L", etc.
(selector_table): Sort and convert to lower case.
(cons_fix_new_hppa): `reloc_type' => `rel_type'.
(pa_ip): Always use strcmp for non-text and strcasecmp for text.
(reg_name_search): Rewrite to call strcasecmp only once per
iteration.
(pa_chk_field_selector): Rewrite to use binary search.
(pa_parse_neg_add_cmpltr): Use strcasecmp for completer comparisons.
(pa_parse_space_stmt): $TEXT$ and $PRIVATE$ are symbols; use case
sensitive comparisons.
(pa_parse_space_stmt): Canonicalize strncasecmp arg to lower case.
(pa_space): "$text$" => "$TEXT$"; "$private$" => "$PRIVATE$". Use
case sensitive comparison for all symbolic names.
(pa_subspace): Canonicalize strncasecmp arg to lower case.
(pa_subspace_start): Use case sensitive comparison for symbolic names.
Mon Dec 20 10:37:48 1993 Ken Raeburn (raeburn@cujo.cygnus.com)
* write.c (adjust_reloc_syms) [RELOC_REQUIRES_SYMBOL]: If no
symbol is present (i.e., relocation against absolute), create a
phony local symbol, and use it in the reloc.
(fixup_segment): When adjusting a reloc with an absolute symbol,
have TC_FORCE_RELOCATION control clearing add_symbolP too.
* config/tc-sparc.h (RELOC_REQUIRES_SYMBOL): Define, for OBJ_COFF.
* symbols.c (S_IS_EXTERNAL, S_IS_LOCAL): Don't use both BSF_EXPORT
and BSF_GLOBAL, since they're the same.
* as.c (main): Only invoke md_end if it's defined as a macro.
* tc.h (md_end): Don't declare it.
* config/tc-*.[ch] (md_end): Deleted, in cases where it doesn't do
anything.
* config/tc-vax.c (vip_end): Deleted null function.
* config/tc-mips.c (md_mips_end): Renamed from md_end.
* config/tc-mips.h (md_mips_end): Declare.
(md_end): New macro, calls md_mips_end.
* write.c (write_object_file): Don't close output file.
* as.c (main): Close output file (if needed) after calling
listing_print, which should be after calling write_object_file,
which sets the frag addresses.
* config/obj-coff.c (obj_coff_dim, obj_coff_endef, obj_coff_line,
obj_coff_scl, obj_coff_size, obj_coff_tag, obj_coff_type,
obj_coff_val): Add unused int argument to satisfy prototypes; goes
with Ian's 10 Sep changes.
(S_GET_DATA_TYPE, S_SET_DATA_TYPE, S_GET_STORAGE_CLASS,
S_SET_STORAGE_CLASS): Now function instead of macros.
(obj_emit_lineno) [BFD_ASSEMBLER]: Deleted.
(tag_insert): Local var ERROR_STRING is const. Use "const" not
"CONST" for argument NAME. Fixed prototype.
(coff_frob_symbol): Removed explicit "#if 1" directive. If
S_IS_EXTERNAL, set storage class to C_EXT.
(s_get_name): Use "const" not "CONST".
* config/obj-coff.h (S_GET_DATA_TYPE, S_SET_DATA_TYPE,
S_GET_STORAGE_CLASS, S_SET_STORAGE_CLASS): Deleted.
(obj_emit_lineno): Declare only for non-BFD_ASSEMBLER. For
BFD_ASSEMBLER, define as macro that aborts.
(obj_extra_stuff, tc_headers_hook): Declare only for
non-BFD_ASSEMBLER.
(coff_frob_symbol): Fix prototype.
Sun Dec 19 00:37:20 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-sparc.c (tc_gen_reloc): Test of pcrel_offset had sense
reversed.
Thu Dec 16 21:13:11 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (md_begin): Initialize "dummy_label".
(tc_gen_reloc, SOM version): For relocations which have no symbol,
set sym_ptr_ptr to dummy_label. Avoids lossage in generic BFD code.
Thu Dec 16 16:07:56 1993 Ken Raeburn (raeburn@cujo.cygnus.com)
* read.c (lex_type): No longer make '[' a valid character for
symbol names.
* config/tc-vax.c (tc_aout_fix_to_chars): Local variable
NBYTES_R_LENGTH now const.
* config/obj-*.c, config/tc-*.c: Omit superfluous "return"
statements at ends of functions. Don't check for null return from
hash_new, since it won't return at all if there's no memory
available. Also, check for null return from hash_insert, rather
than zero-length string, as success indicator.
* subsegs.c (section_symbol): New function.
* subsegs.h (section_symbol): Declare.
* write.c (adjust_reloc_syms): Use it.
Wed Dec 15 15:39:53 1993 Ken Raeburn (raeburn@cujo.cygnus.com)
* Makefile.in (RUNTEST): New variable.
(CHECKFLAGS): Pass it down.
* ecoff.c (ecoff_directive_frame): Permit extra trailing operands;
unused for now, but supplied by Alpha OSF1 compiler.
* as.h: Protect against multiple inclusions.
(int_to_gen): Don't declare.
* config/atof-vax.c (atof_vax): NULL is not a valid character
constant.
Tue Dec 14 21:38:25 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* configure.in (hppa*-*-osf*): Do not consider this a developmental
configuration.
* config/tc-hppa.c (md_apply_fix): Handle cases where no
relocation will be emitted for 32bit formats.
Mon Dec 13 23:33:40 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (md_apply_fix): Do not call hppa_field_adjust
for any of the 'T' field selectors.
Sat Dec 11 11:23:12 1993 Steve Chamberlain (sac@thepub.cygnus.com)
* config/tc-h8500.c (build_bytes): Get reloc type right for a
%page operation. (md_assemble): Don't modify input_line_pointer.
(mdcoff_sizemachdep): New function.
* config/tc-h8500.h (TC_COFF_SIZEMACHDEP): New macro.
* config/tc-z8k.c (get_operand): Delete bogus check.
Wed Dec 8 16:31:51 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
* write.c (number_to_chars_*): Delete bogus range check.
* output-file.c (TARGET_ARCH): No default.
Tue Dec 7 16:02:53 1993 Steve Chamberlain (sac@jonny.cygnus.com)
* config/tc-sh.c (md_convert_frag): Truncate disps before calling
md_number_to_chars. (md_assemble): Don't modify
input_line_pointer.
Mon Dec 6 11:49:03 1993 Doug Evans (dje@canuck.cygnus.com)
* config/tc-h8300.c (md_assemble): Don't update input_line_pointer.
Mon Dec 6 11:20:02 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/obj-som.[ch] (obj_read_begin_hook): Remove last change.
Breaks with the HP compilers.
* config/tc-hppa.c (struct call_info): Remove fields which were
set but never used. Remove all code which sets those fields.
(struct subspace_dictionary_chain): Likewise.
(struct space_dictionary_chain): Likewise.
(pa_desc): Delete useless function. Delete all references.
(hppa_tc_make_sections): No need to count the number of symbols for
the symbol extension section.
Sun Dec 5 17:05:29 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/obj-som.c (obj_som_version): Pass version string to
SOM BFD backend.
(obj_som_copyright): New function. Much like obj_som_version.
* config/tc-hppa.c (obj_copyright): Define as appropriate for
SOM and ELF.
(pa_copyright): Just a stub now.
* config/obj-som.c (obj_read_begin_hook): Delete unused function.
* config/obj-som.h (obj_read_begin_hook): Provide dummy definition.
(TARGET_SYMBOL_FIELDS): Delete. SOM isn't making use of them.
* config/tc-hppa.c (tc_gen_reloc, SOM version): Handle relocation
expansion due to rounding mode selectors. Handle R_[RDSN]_MODE
relocations for selecting the current rounding mode.
* config/tc-hppa.c (evaluate_absolute): Support e_rrsel and
e_rlsel field selectors.
Fri Dec 3 18:33:24 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-elf.h: If ECOFF_DEBUGGING, undef
SEPARATE_STAB_SECTIONS and INIT_STAB_SECTION, and define
OBJ_PROCESS_STAB to call ecoff_stab.
* config/obj-elf.c: Don't compile obj_elf_init_stab_section if
INIT_STAB_SECTION is not defined.
Fri Dec 3 10:56:40 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (md_apply_fix): Delete old wrapper function.
(md_apply_fix_1): Rename to md_apply_fix. Fix argument decls.
Fix comments in various places. Always return a value.
Avoid dereferencing a NULL fx_addsy.
(hppa_force_relocation): Avoid dereferencing a NULL fx_addsy.
Fri Dec 3 09:47:30 1993 Pete Hoogenboom (hoogen@cs.utah.edu)
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-hppa.c: (tc_gen_reloc): Addend for a plabel relocation should
19990502 sourceware import
1999-05-03 09:29:11 +02:00
be either 0 or 2 (no static link or static link required). Always
assume no static link.
Thu Dec 2 11:52:21 1993 Ken Raeburn (raeburn@cygnus.com)
* config/tc-sparc.c (tc_gen_reloc): Make adjustment to addend be
dependent on howto fields, not on format flavour.
* struc-symbol.h (struct symbol): New fields sy_obj and sy_tc,
defined as types OBJ_SYMFIELD_TYPE and TC_SYMFIELD_TYPE, if those
macros are defined.
* config/obj-coff.h (TC_SYMFIELD_TYPE, OBJ_SYMFIELD_TYPE): Define.
(TARGET_SYMBOL_FIELDS, I960_SYM_FIELDS): Don't define.
(sy_tc, sy_obj): Define so that the fields look like they used to,
until all references get changed.
* write.c (fixup_segment): Lots of variables no longer register.
Reordered some code for easier reading.
* config/obj-coff.c (obj_coff_dim): dim_index no longer register.
Deleted superfluous return statement.
(obj_coff_line, obj_coff_size, obj_coff_scl, obj_coff_type,
obj_coff_val, tag_init, tag_insert): Deleted superfluous return
statement.
(align, obj_coff_section): Deleted debugging printfs.
* config/tc-i386.c (md_assemble): Discard some register decls.
Use assignment rather than memcpy to copy template.
(op_hash, reg_hash, prefix_hash): Default C initialization of
statics is sufficient.
* config/tc-sparc.c (print_insn): Array Reloc is now const, and
points to const.
* config/obj-coff.h (TARGET_FORMAT): Only use coff-sparc-lynx if
TE_LYNX; use coff-sparc otherwise.
[USE_NATIVE_HEADERS]: Delete this code; it isn't used.
* write.c (fixup_segment): Call TC_VALIDATE_FIX, if defined,
before processing a fixup. Call TC_ADJUST_RELOC_COUNT just before
returning. Remove some i960-coff-specific code.
(TC_ADJUST_RELOC_COUNT): Default to doing nothing.
* config/tc-i960.h (TC_ADJUST_RELOC_COUNT) [OBJ_COFF]: Define.
(i960_validate_fix): Declare.
(TC_VALIDATE_FIX): Define.
* config/tc-i960.c (i960_validate_fix): New function.
* write.c (number_to_chars_littleendian): New function. Write out
bytes in little endian order, doing size and range checking.
(number_to_chars_bigendian): New function, similar.
* write.h: Declare them.
* config/tc-*.c (md_number_to_chars): Use them.
* config/tc-vax.c (md_apply_fix): Ditto.
* config/tc-i386.c (md_apply_fix): Ditto.
* config/obj-coff.c: Rearranged code for handling line number
data.
(line_fsym): Renamed from function_lineoff in BFD_ASSEMBLER case,
since the usage is different from non-BFD_ASSEMBLER case.
(in_function, clear_function, set_function): New macros, to
combine some of the functionality implemented in differnet ways in
BFD_ASSEMBLER and non-... code. Used in other functions that used
to check function_lineoff &c.
(obj_emit_lineno): Split into two copies, one for BFD_ASSEMBLER,
one for not. Non-BFD_ASSEMBLER version now has temporary variable
to contain char* pointer pointed to by char** argument. Always
follow CROSS_COMPILE code; easier to read that way.
(obj_coff_ln): Don't call add_lineno or c_line_new if appline is
set.
(obj_coff_endef) [BFD_ASSEMBLER]: Don't do anything special for
".bf", it's been done elsewhere.
(coff_frob_symbol): If ilne number data is pending, call
add_linesym to flush it.
(coff_frob_file): Don't do that here.
* config/obj-coff.h (coff_frob_file): Declare.
(obj_frob_file): Define, to call it.
* config/tc-sparc.h (md_create_short_jump, md_create_long_jump,
md_estimate_size_before_relax: Define them as macros calling
as_fatal.
* config/tc-sparc.c: Don't define them as functions.
* configure.in: Handle target alpha-*-osf*. (No cpu files yet.)
Wed Dec 1 23:37:14 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* Makefile (clean): Depend on clean-here.
Wed Dec 1 11:35:21 1993 Ken Raeburn (raeburn@cujo.cygnus.com)
* config/ho-go32.h: Include fopen-bin.h.
* as.h: If FOPEN_WB isn't defined, include fopen-same.h.
* output-file.c (output_file_create): Use FOPEN_WB instead of "w".
* input-file.c (input_file_open): Use FOPEN_RT instead of "r".
* listing.c (file_info): Use FOPEN_RB instead of "rb".
* read.c (s_include): Use FOPEN_RT instead of "r".
* stabs.c: Include obstack.h.
* tc.h (md_create_long_jump): Don't declare if it's already
defined as a macro.
(md_create_short_jump, md_estimate_size_before_relax): Ditto.
* messages.c (as_perror) [BFD_ASSEMBLER]: Use bfd_errmsg instead
of strerror. Clear bfd_error.
* config/te-lynx.h (LOCAL_LABELS_FB): Define, if not already
defined.
Wed Dec 1 10:41:56 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (hppa_elf_mark_end_of_function): New function.
(pa_process_exit, pa_procend): Call it for ELF objects.
Wed Dec 1 12:10:41 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (macro): Subtract 8 from offset in non PIC l.d
case. See comment. From wilson@cygnus.com: for M_L_DAB, set
coproc before doing goto ld.
Tue Nov 30 13:40:30 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* write.c (TC_FORCE_RELOCATION): Provide a default definition.
(fixup_segment): Allow the target machine to specify that a
relocation must be generated for a particular fixup. Remove
#ifndef TC_HPPA hack.
* config/tc-hppa.h (TC_FORCE_RELOCATION): Define.
* config/tc-hppa.c (md_apply_fix_1): Never change fx_addsy to
be NULL. Only fixup_segment is supposed to do that.
(hppa_force_relocation): New function.
Tue Nov 30 11:21:41 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* Makefile.in (stabs.o): Added dependencies.
* config/obj-ecoff.c (ecoff_frob_file): Don't call bfd_set_symtab.
Sun Nov 28 12:11:40 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* app.c (do_scrub_next_char): Output a TAB before any
.app* directive.
* config/tc-hppa.c (fix_new_hppa): Make sure a sub_symbol
exists before trying to peek at its name.
(pa_space): Do not call pa_align_subseg. See hppa/unsorted/align3.s
for testcase.
(pa_align_subseg): Delete unused/unwanted function.
Sat Nov 27 22:49:07 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* read.c (read_a_source_file): Fix test for when to stick a colon
on the end of a label. Make code conditional on either MRI or
LABELS_WITHOUT_COLONS.
* app.c (do_scrub_next_char): If a line begins with whitespace, leave
the single whitespace character alone. Eat all others.
* config/tc-hppa.h (LABELS_WITHOUT_COLONS): Define.
Wed Nov 24 01:22:54 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_procend): Do not call process_exit.
(exit_processing_complete): Delete unwanted variable and all
references.
Wed Nov 24 02:31:38 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* ecoff.c (ecoff_setup_ext): Renamed from ecoff_build_ext.
Changed to not actually build the external symbol information, as
that is now done by the ECOFF back end.
(ecoff_build_debug): Changed accordingly.
* ecoff.h (obj_ecoff_set_ext): Declare. obj-format.c function
called by ecoff_setup_ext.
* config/obj-ecoff.c (ecoff_frob_file): If debug_info count is 0,
set corresponding pointer to NULL. Don't set raw_size and
raw_syments.
(obj_ecoff_set_sym_index): Removed.
(obj_ecoff_set_ext): New function.
* config/obj-ecoff.h (obj_set_sym_index): Don't define.
(obj_ecoff_set_sym_index): Don't declare.
* config/obj-elf.c (obj_ecoff_set_ext, elf_get_extr,
elf_set_index): New functions used for ECOFF_DEBUGGING.
(elf_frob_file): Reworked ECOFF debug generation to use
new functions in bfd/ecofflink.c.
Sun Nov 21 23:54:52 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_def_subspaces): Only create the unwind
subspace for ELF. In the SOM world, the linker is responsible
for creating the unwind subspaces.
Fri Nov 19 16:25:09 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-coffbfd.c: Use PARAMS rather than EXFUN.
(yank_symbols): Don't call S_SET_EXTERNAL if the storage class is
already set. Fixes .def var; .val external_var; .scl 3; .endef.
(adjust_stab_section): Make static. Declare return type. Remove
unused variables.
* config/tc-i386.h: Declare tc_coff_fix2rtype and
tc_coff_sizemachdep.
Fri Nov 19 04:33:59 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* write.c (write_object_file): Disable obj_check_file_symbols
hook; only back end using it wasn't using it correctly.
(write_object_file): Always call obj_frob_symbol and
tc_frob_symbol; always retain symbol if it's used by a relocation,
regardless of what these routines indicate.
* config/obj-coff.c (coff_frob_symbol): Renamed from
coff_check_file_symbols.
* config/obj-coff.h (obj_check_file_symbols): Deleted.
(coff_frob_symbol): Declare.
(obj_frob_symbol): Call it.
* config/obj-coff.c (obj_crawl_symbol_chain, obj_emit_strings,
obj_pre_write_hook): Don't define for BFD_ASSEMBLER.
(c_section_header): Ditto. Delete superfluous return at end of
function.
* config/obj-coff.h [TC_SPARC]: Include coff/sparc.h, and specify
coff-sparc-lynx.
(SA_GET_SYM_TAGNDX): Use BFD_HEADERS version for BFD_ASSEMBLER
too.
(c_section_header): Rewrite prototype so that it contains no
preprocessing directives. Don't declare it at all if
BFD_ASSEMBLER.
* configure.in (sparc*-*-lynxos): New target, using coff and
BFD_ASSEMBLER.
* stabs.c: New file.
* Makefile.in (REAL_SOURCES, OBJS): List it.
* read.c (STAB_SECTION_NAME, STAB_STRING_SECTION_NAME,
get_stab_string_offset, s_stab_generic, s_stab, s_xstab, s_desc):
Moved to new file.
* config/tc-sparc.c (tc_gen_reloc): Handle coff files like elf
files.
Wed Nov 17 17:23:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* configure.in (mips-*-irix5*): New target. Use elf and mips-big.
* config/obj-elf.c: If ECOFF_DEBUGGING, include ecoff.h.
(obj_pseudo_table): If ECOFF_DEBUGGING, define ECOFF
pseudo-ops.
(obj_read_begin_hook): If ECOFF_DEBUGGING, call
ecoff_read_begin_hook.
(obj_symbol_new_hook): If ECOFF_DEBUGGING, call
ecoff_symbol_new_hook.
(obj_elf_init_stab_section): Cast alloca result.
(elf_frob_file): If ECOFF_DEBUGGING, finish up ECOFF debugging
information and write it out into .mdebug section.
* config/obj-elf.h (ELF_TARGET_SYMBOL_FIELDS): New macro.
(TARGET_SYMBOL_FIELDS): Use ELF_TARGET_SYMBOL_FIELDS.
(ECOFF_DEBUGGING): Define if TC_MIPS.
(TARGET_SYMBOL_FIELDS): If ECOFF_DEBUGGING, override to add
fields required by ECOFF.
* config/tc-mips.c: Check ECOFF_DEBUGGING rather than
OBJ_ECOFF in many cases.
(mips_any_noreorder): New variable.
(mips_cprestore_offset): Initialize to -1.
(mips_frame_reg): New variable.
(RELAX_ENCODE, RELAX_OLD, RELAX_NEW, RELAX_RELOC1,
RELAX_RELOC2, RELAX_RELOC3, RELAX_WARN): New macros.
(md_pseudo_table): Handle "gpword" and "cpadd".
(md_begin): Initialize ok to false. If OBJ_ELF, set alignment
of text, data and bss sections to 4. Set alignment of
.reginfo section to 2. If ECOFF_DEBUGGING, create .mdebug
section.
(ALIGN_ERR, ALIGN_ERR2): Removed unused and useless alignment
check.
(append_insn, macro_build, macro_build_lui): Take place
argument. Changed all callers.
(append_insn): If appending a nop, don't emit one.
(macro_build): Changed assertion for 'i', 'j', 'o' case.
(gp_reference): Removed.
(load_address): New function.
(macro): If mips_noreorder is used, set mips_any_noreorder.
Extensive changes to handle GP and PIC symbols differently.
Build both possible code choices using a variant frag, and
make a final decision at the end of assembly when all
information is known. Added PIC support for all symbol
references.
(mips_ip): Don't permit anything but a number after $ for a
coprocessor register. Don't use .lit4 or .lit8 sections when
generating PIC code. If OBJ_ELF, set alignment of .lit4 or
.lit8 section to 4.
(md_apply_fix): Accept and ignore GOT16 and GPREL32 relocs.
(s_change_sec): Set alignment of ELF .rodata or .sdata section
to 4.
(s_mipsset): If .set noreorder, set mips_any_noreorder.
(s_cpload): Ignore .cpload if not generating PIC code. Warn
if .cpload is not in noreorder section.
(s_cprestore): Ignore .cprestore if not generating PIC code.
(s_gpword, s_cpadd): New functions.
(tc_get_register): Added frame argument; if true, set
mips_frame_reg to return value. Changed all callers.
(md_estimate_size_before_relax): Don't error out, but instead
determine how much a frag should grow.
(tc_gen_reloc): Return multiple relocs if appropriate, as
determined by md_estimate_size_before_relax.
(md_convert_frag): New function.
(mips_elf_final_processing): Set ELF header flags based on
mips_any_noreorder and mips_pic.
* config/tc-mips.h (RELOC_EXPANSION_POSSIBLE): Define.
(MAX_RELOC_EXPANSION): Define to be 3.
(md_relax_frag): Define to be 0.
(md_convert_frag): Don't define.
(tc_get_register): Changed declaration.
* ecoff.h, ecoff.c: New files pulled out of config/obj-ecoff.c to
support generating ECOFF debugging information for MIPS ELF
targets. Compiled only if ECOFF_DEBUGGING is defined. Changed
handling of external symbols: it now always generates exactly
those external symbols that are defined in the global symbol list.
* Makefile.in (REAL_SOURCES): Added ecoff.c.
(REAL_HEADERS): Added ecoff.h.
(OBJS): Added ecoff.o.
(ecoff.o): New target.
* config/obj-ecoff.c: Almost entirely moved into ecoff.c.
Remaining code mostly just calls ecoff.c code.
* config/obj-ecoff.h: Define ECOFF_DEBUGGING.
(TARGET_SYMBOL_FIELDS): Make ecoff_symbol a pointer to a
struct localsym.
(obj_read_begin_hook, obj_symbol_new_hook): Define to call
functions in ecoff.c.
(ecoff_stab): Don't declare (now declared in ecoff.h).
(obj_set_sym_index): Define.
(obj_ecoff_set_sym_index): Declare.
* frags.h (frag_grow): Declare.
* frags.c (frag_grow): Made non-static.
* write.c (is_dnrange): Do not define if md_relax_frag is defined.
(relax_segment): If md_relax_frag is defined, use it to handle a
frag of type rs_machine_dependent rather than looking through
md_relax_table.
* read.c (read_a_source_file): If we find a bad pseudo-op,
do a continue to go on to the next line rather than a break.
Removed duplicate bad pseudo-op code which was never executed.
* read.c (s_lcomm): Do not require a comma after the name.
* subsegs.h (segment_info_type): Changed hadone field to bitfield.
Added bss bitfield.
* as.c (perform_an_assembly_pass): Set bss flag for bss_section.
* read.c (s_lcomm): Set bss flag for .sbss section if used.
* write.c (relax_and_size_seg): Don't set SEC_HAS_CONTENTS for a
bss section. Set SEC_RELOC if there are any relocations, even for
a zero size section.
* write.c (write_relocs): In RELOC_EXPANSION_POSSIBLE case, base
data offset on reloc[0]->address rather than reloc[j]->address, so
that multiple relocs can affect different memory locations.
* write.c (chain_frchains_together, relax_and_size_seg,
adjust_reloc_syms, write_relocs): Make third argument PTR, not
char *, to match definition of bfd_map_over_sections.
* app.c (do_scrub_next_char): Don't interpret a comment character
as starting a CPP line directive unless it is a '#' and is the
very first characters on the line (i.e., do not permit leading
whitespace).
* messages.c (identify): Make file argument non-const, to match
callers.
Tue Nov 16 20:38:21 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_ip): Fix thinko in 21bit range check.
Sat Nov 13 18:22:48 1993 Steve Chamberlain (sac@jonny.cygnus.com)
* config/tc-sh.c (md_apply_fix): Cope with IMM16 type too.
* config/tc-z8k.c (build_bytes, md_apply_fix): Understand nDISP7
relocs.
Fri Nov 12 16:51:47 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.[ch]: Fix assorted trivial indention problems.
* config/obj-som.c (obj_som_version): Add missing ';'.
(som_frob_file): Delete whitespace at EOL.
Fri Nov 12 15:26:21 1993 Ken Raeburn (raeburn@cygnus.com)
* Makefile.in (VERSION): Updated following 2.2 release.
Fri Nov 12 14:52:17 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (hppa_fix_struct): Use a real type for the
field selector, rather than an int. All uses of field selectors
fixed.
(tc_gen_reloc): For SOM PLABELs, always set addend to zero for now.
(md_apply_fix_1): Do not call hppa_field_adjust for any PLABEL
field.
Thu Nov 11 15:49:08 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (pa_type_args): For .import statements,
silently ignore attempt to change the symbol type for a function
from ST_ENTRY to ST_CODE on .import.
Wed Nov 10 16:19:13 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* write.h (fixS): Rename fx_callj field to fx_tcbit.
* write.c, config/obj-coff.c, config/obj-coffbfd.c,
config/tc-i960.c: Corresponding changes.
Tue Nov 9 00:49:01 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* Makefile.in (distclean): Delete config-stamp and config.h
* config/tc-hppa.c (evaluate_absolute): Avoid relying on
ANSI-C features.
* config/tc-hppa.c (pa_type_args): Renamed from pa_export_args.
Accept new argument "is_export". All callers changed. When
processing a .export directive for a function, do not allow
the user to set the type to "CODE", instead warn and set the
type to "ENTRY".
Mon Nov 8 12:05:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (mips_ip, printInsn): Handle 'k' (from Ted
Lemon <mellon@pepper.ncd.com>).
(mips_ip): Permit odd numbered floating point registers if -mips3.
(macro): Use BFD_RELOC_MIPS_LITERAL relocation for M_LI_SS.
Mon Nov 8 07:45:01 1993 Doug Evans (dje@canuck.cygnus.com)
* configure.in: Remove h8300h, we have multilib now.
Mon Nov 8 06:09:18 1993 D. V. Henkel-Wallace (gumby@cirdan.cygnus.com)
* configure.in: Support generic netware as being ELF format.
Recognise unixware if the user supplies it.
Sun Nov 7 01:02:08 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* First cut at cleaning up PA instruction parsing.
* config/tc-hppa.c (pa_get_absolute_expression): Accept pointer to
insn structure as an argument, and a pointer to a string. All
callers changed. Always read any field selector here. Call
evaluate absolute to get a return value.
(evaluate_absolute): Addept pointer to insn structure as its
argument. All callers changed.
(INSERT_FIELD_AND_CONTINUE): New macro for inserting a bitfield
into an instruction and continuing the main pa_ip loop.
(CHECK_FIELD): New macro for simple range checking of fields.
(pa_ip): Delete unused variables. Use INSERT_FIELD_AND_CONTINUE
and CHECK_FIELD. All immediate fields now pass through
pa_get_absolute_expression which will also handle field selectors.
Delete dead code. Simplify.
(md_apply_fix_1): Use CHECK_FIELD to verify any fixes that are
applied are in range. Use bfd_put_32 rather than inserting each
byte of the fixed instrution into the buffer ourselves.
* write.c (fixup_segment): Delete {SEG,GLOBAL}_DIFF_ALLOWED code,
it was PA specific and is no longer needed (it's now handled
within the PA backend).
* config/tc-hppa.h (SEG_DIFF_ALLOWED): Delete definition.
* config/tc-hppa.c (fix_new_hppa): If the subtract symbol for
a fixup is $global$ change it to NULL as $global$ is really only
needed long enough to determine the base type of relocation to use.
* config/tc-hppa.c (create_new_subspace): Initialize subspace_defined.
* config/tc-hppa.c (pa-ip, case 'z'): Make field selectors work
for 'z' operands (target of ble branch).
Sat Nov 6 22:41:57 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c: (update_subspace): Fix type and name of last
parameter. All callers fixed.
(md_begin, pa_chk_field_selector, pa_entry): Lint.
* config/tc-hppa.c (cons_fix_new_hppa): Reset field selector
to default state after it's been used.
Fri Nov 5 12:08:21 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/obj-som.c (obj_som_init_stab_section): Change
space/subspace sort keys for the stab sections so as to avoid
bugs in the hp linker and pxdb.
Thu Nov 4 17:00:05 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* write.c (chain_frchains_together): Update pointer to last
frag for a segment in the seginfo structure.
Thu Nov 04 09:09:35 1993 Jeffrey Wheat (cassidy@cygnus.com)
* Makefile.in: Changed RUNTESTFLAGS to RUNTEST_FLAGS
Wed Nov 3 12:16:27 1993 Ken Raeburn (raeburn@rover.cygnus.com)
* write.c (fixup_segment): Handle conversion of subtraction to
pc-relative addressing even if pc-relative flag is already set.
* config/tc-m68k.c (m68k_ip_op): Use strchr, not index. Don't
declare either.
* doc/Makefile.in (distclean): Delete intermediate files from dvi
build, but not the dvi or info files.
* Makefile.in (clean-here): New target; cleans up current
directory only.
(distclean): Use it instead of clean.
* read.c (s_xstab): Don't use alloca.
* messages.c (identify): New routine; print message identifying
following messages as coming from assembler.
(as_show_where, as_bad_internal, as_bad_where): Call it.
(as_fatal): Don't need to identify program any more.
Tue Nov 2 18:04:11 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-sparc.c (sparc_ip): Add default case to reloc switch.
* read.c (s_lcomm): Put small objects in .sbss for MIPS ELF as
well as MIPS ECOFF.
(get_stab_string_offset): Remove unused variable aligned.
Tue Nov 2 15:07:07 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-hppa.c: Add %dp and %rp as synonyms for %r27 and %r2 in the
19990502 sourceware import
1999-05-03 09:29:11 +02:00
predefined register table.
(pa_parse_number): Handle %rp in common register shortcut code.
Consistently set return value to -1 for an error. Clean up error
messages and only print them when "print_errors" is true. Handle
empty string case like the HP assembler -- assume a value of
zero.
* config/ho-hpux.h: Do not include ho-sysv.h. Instead include
standard hpux include files to pick up various function decls.
* config/ho-hppaosf.h: Delete _IO* macros. They are defined in
stdio.h. Delete bogus declaration of free. Get path to
alloca-conf.h right.
Tue Nov 2 13:57:30 1993 Ken Raeburn (raeburn@rover.cygnus.com)
* expr.c (operand): Fix checks for characters following "0b" or
"0f".
Mon Nov 1 21:37:04 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/obj-som.h (obj_attach_unwind_info): Define as a hook
so GAS can attach unwind descriptor information to a BFD symbol.
* config/tc-hppa.c (fix_new_hppa): If necessary attach unwind
descriptor information to the BFD symbol.
(md_apply_fix): R_HPPA_ENTRY and R_HPPA_EXIT can never be "applied",
they are simply markers. Make R_HPPA_UNWIND_* handling OBJ_ELF
dependent.
(pa_build_unwind_subspace): Whole function is OBJ_ELF dependent.
(pa_entry): Build a R_HPPA_ENTRY relocation when configured for SOM.
(pa_exit): Likewise, but built a R_HPPA_EXIT relocation. Do not
build "end-of-function" symbols for SOM, they are not needed.
* config/tc-hppa.c (process_exit): Create temporary symbols with
correct prefixes so they can be eliminated later.
* config/tc-hppa.c (call_info struct): Delete unused "frame" field.
(pa_callinfo): Insert framesize into the unwind information as
soon as it's available.
(pa_build_unwind_subspace): Do not insert framesize into the unwind
information here.
* Add support for marker type relocations. These mark areas
of interest to the linker. ENTRY/EXIT relocations for SOM are
an example of marker relocations.
* write.c (write_relocs): Instead of assuming size of a relocation
is 4 bytes, pick up the size from relocation itself.
(fixup_segment): Do not complain that a value is too small for
marker relocations.
* struc-symbol.h: Add new "sy_used" field to the symbol structure.
* expr.c (operand): Set sy_used for any symbol used as an operand.
(expr): Likewise for any symbol used in an expression.
* config/tc-hppa.h (tc_frob_symbol): Define. Punt imported
symbols which are never used and absolute symbols which local scope.
* config/obj-som.h (obj_frob_file): Define.
* config/obj-som.c (obj_som_init_stab_section): Set alignment
of stab sections. Make space for the special stab entry.
(adjust_stab_sections): Adjust the special entry in the
stabs section.
(som_frob_file): New function. Simply calls adjust_stab_sections
for each section.
Mon Nov 1 17:54:29 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (PIC_CALL_REG, SP, FP): Define.
(mips_pic, mips_cprestore_offset): New static variables.
(md_pseudo_table): Handle .abicalls, .cpload, and .cprestore.
Ignore .bgnb and .endb.
(gp_reference): _gp_disp is never addressed off GP.
(macro_build): Ignore macros while searching for insn. For cases
i, j, and o, accept the reloc type as an argument rather than
assuming BFD_RELOC_LO16. Don't try to convert BFD_RELOC_LO16 to
BFD_RELOC_MIPS_GPREL. Added new case a.
(set_at, load_register, macro): Changed calls to macro_build to
pass new argument for i, j and o cases.
(macro): Handle M_JAL_1, M_JAL_2 and M_JAL_A. These require
special handling when generating SVR4 PIC code.
(mips_ip, tc_get_register, s_frame): Use macros FP, SP, GP and AT
rather than hard coded constants.
(md_apply_fix): Handle BFD_RELOC_MIPS_LITERAL and
BFD_RELOC_MIPS_CALL16.
(s_option): Set mips_pic based on .option picN.
(s_abicalls): New function; set mips_pic to 2.
(s_cpload): New function; handle .cpload.
(s_cprestore): New function; handle .cprestore.
* config/obj-ecoff.c (obj_pseudo_table): Add entries for .bgnb,
.endb and .verstamp, setting them to s_ignore.
Sun Oct 31 00:36:40 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (subspace_dictionary_chain): Add new ssd_defined
field. Define SUBSPACE_DEFINED accessor macro.
(pa_subspace): Allow user to override subspace attributes for
built-in subspaces. Set ssd_defined at the end of fcn -- that
way the attributes can only be changed once. Pass newly allocated
name to is_defined_subspace, not a pointer to the input line.
Fix typo in space/subspace rework.
(is_defined_subspace): Delete unused 2nd arg. All callers changed.
* config/tc-hppa.c (pa_import): If currently in the text segment
and a symbol is imported without type information, set BSF_FUNCTION
for the symbol.
* write.c (relax_and_size_seg): Correct test to determine if
the section's size was rounded up.
* config/obj-som.h (obj_set_symbol_type): Define a hook so GAS
can properly set all the SOM symbol types.
* config/tc-hppa.c (pa_symbol_type): New enum to represent the
symbol types which can be set from an IMPORT/EXPORT statement.
(pa_export_args): Set the pa_symbol_type type based on arguments.
If defined, call obj_set_symbol_type to pass this information on
to the BFD backend.
* read.c (get_stab_string_offset): Set SEC_DEBUGGING for any
stab section we make.
(s_stab_generic): Likewise.
Sat Oct 30 14:26:20 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* Allow backends to override the value of the fake label.
* write.h (LOCAL_LABEL): Delete DOT_LABEL_PREFIX code. Instead
assume backends will define LOCAL_LABEL if anything other than
'L' is used to denote a local label.
(FAKE_LABEL_NAME): New macro. Defines the default name used for
the "fake" label.
* expr.c (make_expr_symbol): Delete DOT_LABEL_PREFIX code
and instead simply use the string defined by FAKE_LABEL_NAME.
(operand): Likewise.
* read.c (s_stab_generic): Likewise.
* config/tc-hppa.h (FAKE_LABEL_NAME): Define as L$0\001 so it's
known to be a local label.
* config/tc-i386.h (DOT_LABEL_PREFIX): Delete.
(LOCAL_LABEL, FAKE_LABEL_NAME): Define.
* config/tc-m68k.h (DOT_LABEL_PREFIX): Delete.
(LOCAL_LABEL, FAKE_LABEL_NAME): Define.
* config/te-sco386.h (DOT_LABEL_PREFIX): Delete.
(LOCAL_LABEL, FAKE_LABEL_NAME): Define.
Rework space/subspace handling in PA code to fully support
SOM spaces/subspaces.
* config/tc-hppa.c (USE_ALIASES): New object-format dependent define
to control the use of space/subspace name aliases.
(update_subspace): Accept space chain entry for containing space
as a new parameter. All callers changed.
(pa_get_label): Use current_space rather than pa_segment_to_space.
(pa_define_label): Likewise.
(pa_undefine_label): Likewise.
(md_begin): Change into the (possibly modified) text_section.
(pa_parse_space_stmt): Create a new segment/space if create_flag
is true, and the space name is not one of the two predefined spaces.
(pa_subspace): Use current_space rather than a lookup via
pa_segment_to_space. Reset BFD section flags as required by
the .subspace directive. Likewise for the section alignment.
Pass the current space to update_subspace and create_new_subspace.
(pa_spaces_begin): Only use space/subspace aliases if USE_ALIASES
is true. When not using aliases, create a BFD section for each
subspace encountered. When not using aliases replace the default
text, data, and bss segments with new ones.
(create_new_subspace): When not using aliases each subspace has a
section/segment and subsegments are not needed, so set the subsegment
to zero.
* config/tc-hppa.c (pa_parse_space_stmt): If needed, call
obj_set_section_attributes to pass space attributes to the
BFD backend.
(create_new_space): Likewise.
(create_new_subspace): Likewise for subspace attributes using
obj_set_subsection_attributes.
(update_subspace): Likewise for subspace attributes using
obj_set_subsection_attributes.
* config/tc-hppa.c (pa_parse_space_stmt): Get segment and sort key
for $TEXT$ and $PRIVATE$ from the default space structure.
* config/tc-hppa.c (pa_export_args): Always set BSF_FUNCTION
as appropriate for the given type.
* config/tc-hppa.c (tc_gen_reloc): Preliminary stab at handling
SOM relocations.
* config/tc-hppa.c (pa_comm): Delete incorrect check for symbol
redefinition.
* config/obj-som.[ch]: New files for SOM support. Note SOM
support is not yet complete in GAS or BFD.
* config/ho-hppabsd.h: Delete IO* macros, they are defined in
stdio.h. Delete declaration of free. Include stdlib.h, unistd.h,
and string.h.
Fri Oct 29 13:26:12 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* Allow backends to override the section names used for embedded
stabs support. Needed for SOM.
* read.c (STAB_SECTION_NAME): Default the name of the stab section
to ".stab".
(STAB_STRING_SECTION_NAME): Likewise for the stab strings section.
(get_stab_string_offset): Is now passed the full name for the
stab string section rather than a name prefix. All references
changed.
(s_stab_generic): New argument for the stab string section name.
all references changed.
(s_xstab): Append "str" to the stab section name to get the
stab string section name.
* config/obj-coffbfd.c (obj_coff_init_stab_section): Append "str"
to stab section name to get the stab string section name. Pass
the full name of the stab string section to get_stab_string_offset.
* config/obj-elf.c (obj_elf_init_stab_section): Likewise.
* config/tc-hppa.c (md_begin): Disable "-R" option to fold
textand data segments. Warn user "-R" is unsupported on the
PA.
Thu Oct 28 12:36:13 1993 Jeffrey A. Law (law@snake.cs.utah.edu)
* config/tc-hppa.c (md_pseudo_table): Default alignment is 8 for
.align and .ALIGN directives.
* config/tc-hppa.c (pa_space): Do not report an error for a .space
directive which does not define a "well-known" space and does
not include a space number as an argument.
* config/tc-hppa.c (pa_def_subspaces): Correct initialization of the
"defined", "loadable", "code_only" and "space_index" fields.
(pa_def_spaces): Correct initialization of the "spnum", "defined",
and "private" fields.
* write.h (struct fix): Add new tc_fix_data field for the various
backends to attach machine dependent fixup information to.
* write.c (fix_new_internal): Initialize new tc_fix_data field.
* config/tc-hppa.c (hppa_fix_struct): Delete unnecessary fix_fixP and
fx_next fields.
(hppa_find_hppa_fix): Delete unnecessary function. Fix all
callers to get HPPA fixup information from the tc_fix_data field
in the GAS fixup.
(hppa_fix_root): Delete unnecessary variable.
(fix_new_hppa): Attach HPPA fixup data to the GAS fixup.
* config/tc-hppa.c (pa_set_start_symbol); Delete unwanted
function. Fix all callers.
(subspace_dictionary_chain): Delete unused ssd_start_sym field.
* config/tc-hppa.c (hppa_fix_adjustable): New function to determine
if a particular fixup is adjustable.
* config/tc-hppa.h (tc_fix_adjustable): Call hppa_fix_adjustable to
perform the real work.
* config/tc-hppa.h (RELOC_EXPANSION_POSSIBLE): Move definition out
of OBJ_XXX conditionals.
(MAX_RELOC_EXPANSION): Likewise.
* config/tc-hppa.c (log2): Renamed from is_power_of_2. Fix all
callers. Now returns log2 (N) for positive N which are an exact
power of two or -1 for an error.
* config/tc-hppa.c (pa_callinfo): Range check values provided for
ENTRY_GR, ENTRY_FR and ENTRY_SR. Properly adjust vaues before
inserting them into the unwind table.
* config/tc-hppa.c (NEEDS_FIXUP): Delete definition and all references.
(hppa_gen_reloc_type): New object format dependent macro.
(pa_ip): Delete tons of code which was either OBJ_SOM or OBJ_ELF
conditional. The code can (and will) be shared between SOM & ELF
formats in the near future.
(cons_fix_new_hppa, md_apply_fix_1): Likewise.
(pa_build_unwind_subspace, process_exit, pa_exit): Likewise.
(tc_gen_reloc): Use hppa_gen_reloc rather than an object format
specific call.
* config/tc-hppa.c (pa_comm): Set the segment for a common symbol
to bfd_und_section.
* config/obj-elf.h (obj_elf_version): Add extern prototype.
* configure.in (hppa-*-bsd*): New configuration.
BFD is always used for GAS generating SOM objects.
* write.c (adjust_reloc_syms): Set sy_used_in_reloc if an
adjustment is rejected by the target machine.
* config/tc-hppa.c (pa_big_cons): Delete function and its
declaration. All callers changed to use pa_cons.
* write.c (fixup_segment): Fix indention and open/close brace
problem.
From Pete Hoogenboom:
* config/tc-hppa.c (md_atof): Return a NULL on success rather than
an empty string.
* config/tc-hppa.c (pa_parse_space_stmt): Advance
input_line_poitner when an invalid argument is encountered.
Thu Oct 28 13:09:26 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-a29k.c (md_begin): When opcodes are mashed together in
the table, require that the one without bit 0x1000000 set come
first. Require further that it be case 'b' or 'P'. The a29k
opcode table already meets these constraints.
(machine_ip): When handling case 'i' or 'A', make sure that the
appropriate opcode really exists by looking at the next entry in
the opcode table.
Wed Oct 27 11:48:56 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-m68k.c (m68k_ip): Adjust offsets for PC relative
fixups. Add 6 for long 7.3 case, 2 for short 7.2 case.
* config/obj-ecoff.c (obj_ecoff_ent): Ignore an optional number
after a .ent directive.
* config/tc-mips.c (mips_ip): Handle '>' case (shift amount
between 32 and 63 for double shift instruction). Do & 0x1f rather
than % 32.
(printInsn): Handle '>'.
Tue Oct 26 16:58:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-ns32k.c (tc_aout_fix_to_chars): Output the symbol
number in the right place. Untested. Probably does not work for
cross assembly. From cagney@cs.adelaide.edu.au (Andrew Cagney).
* config/tc-m68k.c (md_apply_fix_2): Error if a short branch uses
an illegal offset of 0 or -1.
* config/obj-elf.c (obj_elf_init_stab_section): Align .stab
section to a longword boundary.
Tue Oct 26 10:24:31 1993 Ken Raeburn (raeburn@cygnus.com)
* Makefile.in (CHECKFLAGS): Pass down RUNTESTFLAGS.
From Jeff Law:
* config/tc-hppa.c (tc_gen_reloc): ELF32_HPPA_R_ADDEND ->
HPPA_R_ADDEND.
Mon Oct 25 14:06:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-sparc.c (sparc_ip): Fix up membar argument handling.
Mon Oct 25 11:17:58 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
* config/tc-sh.c (build_Mbytes): Write the relocs to the correct
address. (md_assemble): Make error handling a bit more graceful.
(md_apply_fix): Don't warn on non aligned displacement.
* config/tc-z8k.c (get_specific, built_bytes): Understand all the
aspects of lda.
Mon Oct 25 10:20:31 1993 Ken Raeburn (raeburn@rover.cygnus.com)
* doc/Makefile.in (install-info): Use "$<*" so VPATH will find
as.info* even if they're in $(srcdir) (e.g., for FSF
distributions).
* write.c (write_relocs): For relocs that are pc_relative and
pcrel_offset and not partial_inplace, adjust reloc->addend to
compensate for a bfd_perform_relocation bug.
* config/tc-sparc.h: Removed remaining non-BFD_ASSEMBLER code.
* config/tc-sparc.c: Ditto.
(tc_gen_reloc): Include fx_offset for pcrel fixups.
Sun Oct 24 16:49:00 1993 Jim Wilson (wilson@x1.cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-mips.c (md_pseudo_table): Add dword pseudo op.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Fri Oct 22 20:40:56 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com)
* messages.c: replaced all variables called Format with 'format',
for consistency throughout
* configure.in: handle mips*- instead of mips, mips*el for little
endian configurations
Fri Oct 22 14:45:49 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* input-scrub.c (physical_input_file, logical_input_file,
physical_input_line, logical_input_line): Made static.
(as_where): Return current file name and line number, don't print
them out.
* messages.c (as_show_where): New static function. Other
functions use it instead of as_where.
(as_bad_internal): New static function.
(as_bad): Use as_bad_internal.
(as_bad_where): New function, like as_bad but taking a file name
and line number.
* as.h (as_bad_where): Declare.
(as_where): Change prototype for new arguments.
* write.h (fixS): Added fields fx_file and fx_line.
* write.c (fix_new_internal): Save file and line number in fix.
(fixup_segment): Use as_bad_where, not as_bad.
* input-file.c (f_in, file_name): Made static.
* cond.c (struct file_line): Just use file and line fields.
(s_else): Use as_where and as_bad_where, not get_file_line and
set_file_line.
(get_file_line, set_file_line): Removed.
* listing.c (listing_newline): Use as_where.
* config/obj-coffbfd.c (obj_coff_init_stab_section): Use as_where.
* config/obj-ecoff.c (add_file): Use as_where.
* config/obj-elf.c (obj_elf_init_stab_section): Use as_where.
* config/tc-m68k.c (md_apply_fix_2): Use as_bad_where.
* config/tc-mips.c (tc_gen_reloc): Use as_bad_where, not assert.
Thu Oct 21 12:52:01 1993 Ken Raeburn (raeburn@cygnus.com)
* config/tc-m68k.h: Don't define REGISTER_PREFIX or
OPTIONAL_REGISTER_PREFIX if either is already defined.
* config/tc-m68k.c (m68k_ip): Delete some code in "#if 0".
* configure.in: Set bfd_gas for all sparc targets. Added facility
for keeping or rejecting configurations still under development;
default is to assume production environment, and reject configs
still being worked on. Mark Elf configurations (except sparc and
i386) as developmental. Deleted cases matching some generic names
in favor of more specific names. (E.g., when we get Alpha
support, we'll still only support VMS for Vax.)
* config/tc-sparc.h (md_end): New macro.
* config/tc-sparc.c (md_end): Function deleted.
(BFD_RELOC_*): Delete macros that used to help keep the non-bfd
version compiling. All sparc targets will use bfd now.
* tc.h (md_end): Don't declare if it's defined as a macro.
Changes from Jeff Law and Peter Hoogenboom:
* read.c (next_char_of_string): Limit octal character constants to
three digits.
* config/tc-hppa.h: Major cleanup. Use GNU-style comments. Warn
against placing additional object-file dependent code here. Warn
against contaminating all of GAS with the internals of tc-hppa.c
through inclusion of tc-hppa.h. Delete all forward declarations
for functions only used within tc-hppa.c, likewise for structures,
variables, and #defines. Try to group OBJ_ELF and OBJ_SOM
conditional code in a few small places.
* config/tc-hppa.c: Major cleanup. Use GNU-style comments. Group
structures, global variables, forward declarations together.
Reduce (or in some cases eliminate) OBJ_ELF and OBJ_SOM
conditional code -- try to group conditional code together
into a few places. Make all functions and variables which
are only used within tc-hppa.c static. PARAMize all functions.
Add comments to functions. Delete unused functions, variables,
#defines, etc. Delete unused members within structures. Delete
ldil;ble hacks -- it is believed they were installed to work
around old gas bugs. Avoid using mixed case for local
functions, variables, and structures. Fix formatting problems
not found by GNU-indent. Add FIXME notices for things which
should be worked on the near future. Delete lots of old
useless (1.36 PA-SOM) code.
* config/tc-hppa.c: (fix_new_hppa): Initialize the fx_r_type
field of the fixS structure. Needed to build unwind
descriptors correctly.
* write.c: (fixup_segment): Allow expressions such as
sym1-sym2+const as long as sym2 is $global$.
* write.c (adjust_reloc_syms): Provide a hook so that a target
cpu configuration can reject certain relocation reductions.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-hppa.h (tc_fix_adjustable): New macro. Only accept relocations
19990502 sourceware import
1999-05-03 09:29:11 +02:00
which do not involve function symbols.
* config/tc-hppa.h: Reindent with GNU-indent. Delete references
to OBJ_OSFROSE. Fix typos (OBJ_SOME -> OBJ_SOM). Delete unused
STAB_FIXUP macro.
* config/tc-hppa.c: Likewise.
* config/tc-hppa.c (md_apply_fix_1): Use elf_symbol_type, instead
of elf32_symbol_type.
(pa_export_args): Likewise.
(elf_hppa_final_processing): Likewise.
(pa_desc): Do not call obj_elf_desc. (Is pa_desc even needed
anymore?)
(hppa_tc_make_sections): Do not declare elf_get_symtab_map any
ore.
* config/tc-hppa.c: (md_section_align): Align all sections to
a multiple of the section alignment rather than always a
multiple of 8.
* config/tc-hppa.c (hppa_tc_symbol): If the argument relocation
bits are zero (eg they specify no relocations), then do not even
bother adding their entries to thesymextn section.
Thu Oct 21 15:44:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-sparc.c (md_parse_option): Accept and ignore -sparc
option, which is used by the SunOS make default .s.o rule.
Wed Oct 20 12:26:33 1993 Ken Raeburn (raeburn@rover.cygnus.com)
* config/tc-sparc.c (sparc_ip, label "immediate"): Convert relocs
operating on upper 32 bits of immediate constants to lower-half
relocs with adjusted constants.
Tue Oct 19 18:13:26 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-m68k.h (AOUT_MACHTYPE): Define to be external variable
m68k_aout_machtype.
* config/tc-m68k.c (omagic): Remove obsolete and unused variable.
(m68k_aout_machtype): New variable, if OBJ_AOUT.
(md_assemble): Initialize m68k_aout_machtype based on
current_architecture, if OBJ_AOUT.
(md_parse_option): Remove obsolete reference to omagic.
Thu Oct 14 16:51:00 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (md_pseudo_table): Ignore .livereg pseudo-op.
(s_option): Ignore .option O* and .option pic*.
(s_ent): Skip whitespace between symbol and optional digit.
(my_getSmallExpression): Handle ($xx) correctly: assume 0($xx).
* app.c (do_scrub_next_char): Always accept 'x' and 'X' as escape
characters in state 6.
* read.c (next_char_of_string): Accept \Xh* and \xh* where h* are
* ChangeLog: Fix typos. * ChangeLog-9295: Likewise. * as.c: Fix comment typos. * as.h: Likewise. * atof-generic.c: Likewise. * bit_fix.h: Likewise. * frags.h: Likewise. * hash.c: Likewise. * input-file.c: Likewise. * input-scrub.c: Likewise. * itbl-ops.c: Likewise. * itbl-parse.y: Likewise. * listing.c: Likewise. * macro.h: Likewise. * read.c: Likewise. * sb.c: Likewise. * sb.h: Likewise. * symbols.c: Likewise. * symbols.h: Likewise.
2003-10-27 13:45:17 +01:00
hexadecimal digits.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
* config/tc-i386.c (md_apply_fix_1): Make cross segment calls work
for ELF by hacking around bizarre bfd_perform_relocation behaviour
that I don't dare change.
Thu Oct 14 11:33:25 1993 Michael Meissner (meissner@osf.org)
* config/tc-i386.c: (md_begin): Do not zero static arrays. Don't
call strchr for each character to see if it is a special char,
instead add a second loop over special_chars. Set alignment
of text, data and bss sections to 4.
(pi, te, pt, pe, ps): Add declarations so that DEBUG386 can be
used again.
(reloc): Don't return 8 and 16 bit non-PC relative relocations on
ELF, since the ELF object format does not have these type of
relocations. Change the abort into as as_bad and return
BFD_RELOC_NONE to silence compiler warnings.
(md_assemble): Keep track of the instruction size. Allow white
space between the $ and the constant for compatibility with older
gases and other assemblers.
(i386_operand): Skip spaces between $ and expression.
(tc_gen_reloc): Don't allow anything but 32 bit relocations on
ELF. Convert abort into an as_bad and assert into as_fatal.
Wed Oct 13 16:50:55 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/obj-coffbfd.c (fixup_segment) [DIFF_EXPR_OK]: If
sub_symbolP is in the current segment, convert to a PC-relative
fixup and discard the symbol.
Wed Oct 13 14:00:02 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-ecoff.c (ecoff_build_symbols): Handle st_End symbol
for st_StaticProc just like st_Proc.
* write.c (relax_and_size_all_segments): Moved #endif for OBJ_BOUT
so that OBJ_BOUT doesn't forget to adjust all the fragments in the
.bss section.
Tue Oct 12 17:26:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c: If OBJ_ELF, include elf/mips.h.
(mips_regmask_frag): New static variable, if OBJ_ELF.
(md_begin): If OBJ_ELF, create .reginfo section and set
mips_regmask_frag to a frag.
(mips_elf_final_processing): New function, if OBJ_ELF. Set
mips_regmask_frag to register mask information.
* config/tc-mips.h (elf_tc_final_processing): New macro, defined
if OBJ_ELF.
Tue Oct 12 03:33:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* messages.c (as_fatal): Use myname when printing messages.
* config/tc-i960.c (md_begin): Use null pointer, not empty string,
as initial "return" value in case hashing isn't needed.
* config/tc-a29k.c (md_atof): Return null, not empty string, on
success.
* config/tc-h8300.c (md_atof), config/tc-h8500.c (md_atof),
config/tc-hppa.c (md_atof), config/tc-i860.c (md_atof),
config/tc-i960.c (md_atof), config/tc-m88k.c (md_atof),
config/tc-ns32k.c (md_atof), config/tc-sh.c (md_atof): Ditto.
Mon Oct 11 16:46:31 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
fix for pr 3571
* config/tc-h8300.c (get_specific): Special action if 8 bit
address seen. (check_operand): Don't complain if truncating top
bits of an 8 bit address. (build_bytes): Allow an immediate and
an absolute in the same insn.
Mon Oct 11 17:18:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* write.c (write_contents): Don't crash if seginfo is NULL.
* config/obj-ecoff.c (ecoff_frob_file): Write out register masks
by modifying .reginfo section, not by directly modifying BFD
backend data.
Mon Oct 11 14:11:32 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com)
* config/ho-sunos.h: remove extern time declaration
Mon Oct 11 16:14:43 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* messages.c (as_fatal): Do mention that it's the assembler that
got the fatal error.
Fri Oct 8 14:09:35 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (mips_gprmask, mips_cprmask): New variables to
hold register masks.
(md_begin): Initialize them to zero.
(append_insn): Update mips_gprmask and mips_cprmask. Also add
register variables pinfo and prev_pinfo.
* config/tc-mips.h (mips_gprmask, mips_cprmask): Declare.
* config/obj-ecoff.c (ecoff_frob_file): If TC_MIPS, set gprmask
and cprmask from mips_gprmask and mips_cprmask.
* config/tc-mips.h: Define TARGET_FORMAT if OBJ_ELF.
* config/tc-mips.c (GPOPT): Define if OBJ_ECOFF or OBJ_ELF.
(various): Change all references to GP references to apply if
GPOPT, not if OBJ_ECOFF.
(s_change_sec): Rearrange somewhat. If OBJ_ELF, use .rodata
instead of .rdata. If OBJ_ELF, set section flags for .rodata and
.sdata sections.
(s_frame, s_loc, s_mask): Comment out entire functions, rather
than just body. They're not used anyhow.
* configure.in: Set cpu_type to mips for mips*. Accept
mips-*-elfl* and mips-*-elf*.
Thu Oct 7 18:36:29 1993 Michael Meissner (meissner@osf.org)
* config/obj-elf.c (obj_elf_common): Allow the alignment field to
not be specified.
Wed Oct 6 13:01:34 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (cons_fix_new_mips): New function. Turn
BFD_RELOC_64 into BFD_RELOC_32.
* config/tc-mips.h (TC_CONS_FIX_NEW): Define.
(cons_fix_new_mips): Declare.
Changes to let cons handle bignums like general expressions.
* expr.h (expressionS): New field X_unsigned.
* expr.c (operand): Initialize X_unsigned to 1. Set it to 0 for
unary minus case.
(expr) Fix typo resultP to right if missing operand. Set
X_unsigned to 1 when building new expression.
* read.c (potable): Make "octa" and "quad" call cons, not
big_cons.
(cons): Handle bignums. If given an O_constant (small integer) to
fill a big space, turn it into a bignum.
(parse_bitfield_cons): Set X_unsigned field.
(bignum_low, bignum_limit, bignum_high, grow_bignum, big_cons):
Removed.
* read.h (big_cons): Remove prototype.
* symbols.c (resolve_symbol_value): Don't give a warning if a
symbol in expr_section can not be resolved.
(S_SET_VALUE): Clear X_unsigned.
* write.c (write_object_file): If resolve_symbol_value failed on a
symbol we are writing out, give a warning.
* config/tc-h8500.c (parse_reglist): Set X_unsigned.
* config/tc-hppa.c (md_pseudo_table): Change "octa" and "quad" to
call pa_cons, not pa_big_cons.
(pa_big_cons): Remove.
* config/tc-hppa.h (pa_big_cons): Remove declaration.
* config/tc-i960.c (md_pseudo_table): Change "quad" to call cons,
not big_cons.
Tue Oct 5 10:53:36 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com)
* doc/as.texinfo (Copying): new node, to handle the recent changes
in the texinfo/gpl.texinfo file
Mon Oct 4 17:10:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* read.c (big_cons): Handle "0" correctly.
* config/tc-mips.c (md_begin): Set target_big_endian correctly.
Mon Oct 4 15:37:57 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-m68k.c (m68k_ip): Mode 7.3 operand using PC should
have pc-relative fixup.
(md_parse_option): Move "-k" case down near "-pic" case.
* configure.in: Alphabetize list of cpu type alternatives. Enable
OS values of "linux*elf*" and "linux*coff*" to select those
formats, with linux emulation. Don't bother checking for upper-
or mixed-case versions of "ose".
Thu Sep 30 11:05:35 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
* config/z8k.c (md_pseudo_table): add "unseg".
Wed Sep 29 16:15:11 1993 K. Richard Pixley (rich@sendai.cygnus.com)
* config/m88k-opcode.h (m88k_opcodes): correct a few mistakes
found while extending the dissassembler.
Tue Sep 28 12:02:04 1993 Stan Shebs (shebs@rtl.cygnus.com)
* configure.in: Split i386 LynxOS out from other coff targets,
add a specific Lynx emulation.
Add m68k LynxOS target.
* config/tc-i386.c: Define specific Lynx target format.
* config/tc-m68k.c: Define specific Lynx target format.
* config/te-lynx.h: New file.
* config/obj-coffbfd.h: Don't set TARGET_FORMAT to be
"coff-{i386,m68k}" if TARGET_FORMAT already defined.
(INIT_STAB_SECTION): Define.
* config/obj-coffbfd.c: Include <time.h>.
(write_object_file): Look for .stab sections and call
adjust_stab_section.
(adjust_stab_section): New function, fills in the first symbol
of a stab section with number of symbols and string table size.
(obj_coff_init_stab_section): New function, creates the initial
symbol for a stab section.
Mon Sep 27 15:21:55 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/atof-vax.c (md_atof): Return null on success instead of
empty string.
* config/atof-tahoe.c (md_atof): Ditto.
* read.c (float_cons): Expect a null pointer for success, not an
empty string.
* hash.c (hash_insert, hash_jam, hash_grow): Return null pointer
on success, instead of empty string. All callers changed.
* config/tc-vax.c: Use PARAMS in declarations.
(vip_op): Use NULL instead of empty string for success in error
and warning fields.
Sun Sep 26 23:45:29 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* expr.c (expr) [DIFF_EXPR_OK]: Permit subtraction of two symbols
in different defined segments.
* write.c (relax_segment): Localize "aim" variable. If
DIFF_EXPR_OK, don't impose checks on symbol segment types.
(fixup_segment) [DIFF_EXPR_OK]: If sub_symbolP is in the current
segment, convert to a PC-relative fixup and discard the symbol.
* config/tc-m68k.c (flag_want_pic): New variable, mostly ignored.
(md_parse_option) [TE_SUN3]: Set it for "-k".
(m68k_ip): Generate proper fixup for mode 7.3.
* config/tc-m68k.h (DIFF_EXPR_OK): Define.
Sat Sep 25 05:08:19 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-m68k.c (struct m68k_incant, getone, gettwo): Moved
earlier in the file.
(insop, add_exp): Now defined as functions, for readability.
(insop): Now takes two arguments; callers changed.
Fri Sep 24 12:37:59 1993 K. Richard Pixley (rich@sendai.cygnus.com)
* config/tc-m88k.c (get_o6): new function.
(get_bf, get_cmp, get_cnd, get_cr, get_fcr, get_imm16, get_reg,
get_vec9, getval, get_pcr, calcop, match_name): make static and
prototype.
(s_file): remove extraneous forward decl.
(md_begin): add const to retval decl.
(calcop): cope with instructions without arguments. Handle 'o'
type argument, the o6 field of the prot insn.
(md_estimate_size_before_relax): return a dummy value.
* config/m88k-opcode.h (m88k_opcodes): comment change; o6 field is
in bits 10 through 7. flt.[dxs]s requires an r register in the
second argument. New instruction lda.x. New instruction muls
(alias for mul).
Fri Sep 24 13:43:30 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* Makefile.in (distclean): Recurse like clean.
* doc/Makefile.in (distclean): New target.
* config/tc-mips.c (md_begin): Set BFD architecture and machine
based on MIPS ISA level.
Thu Sep 23 17:58:58 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* as.c (main): "exhausted", not "exhuasted".
* struc-symbol.h (struct symbol): Add sy_used_in_reloc field.
* write.c (adjust_reloc_syms): Set sy_used_in_reloc.
(write_object_file): Never strip symbols with sy_used_in_reloc
set.
* config/obj-elf.c (obj_elf_section): Rewrote to handle both
Solaris and SVR4 style .section pseudo-ops.
(obj_elf_ident): Set SEC_READONLY for .comment section.
* config/tc-sparc.c (md_apply_fix): If this is ELF, and we're
generating a reloc, don't apply a fix.
Thu Sep 23 13:16:58 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/obj-coffbfd.c (relax_align): Now static.
Mon Sep 20 19:23:35 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* read.c (get_stab_string_offset): Make non-static. Make
arguments const. Don't align strings to 4 byte boundaries.
* read.h: Declare get_stab_string_offset.
* config/obj-elf.c (obj_elf_section): Set SEC_ALLOC as well as
SEC_LOAD for progbits section.
(obj_elf_init_stab_section): New function.
(adjust_stab_sections): Add casts to avoid warnings.
* config/obj-elf.h (INIT_STAB_SECTION): Call
obj_elf_init_stab_section.
(OBJ_PROCESS_STAB): Removed definition.
Fri Sep 17 18:12:34 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-elf.h (S_GET_SIZE): Define.
(obj_frob_forward_symbol): Define.
* config/tc-i386.c (line_comment_chars): Initialize in all cases.
Thu Sep 16 14:23:08 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* tc.h: Declare tc_gen_reloc differently depending upon
RELOC_EXPANSION_POSSIBLE.
* config/obj-elf.c (obj_elf_section): Only set flags when first
creating the section.
Wed Sep 15 12:15:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (append_insn): Don't swap a trap instruction
with a branch.
Tue Sep 14 13:31:04 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-elf.c (obj_elf_data, obj_elf_text): New functions;
set previous_section and previous_subsection and then call s_data
and s_text, respectively.
(obj_pseudo_table): Add data and text.
(obj_elf_section): Add SEC_LOAD to default initialization of
flags. Treat .rodata1 like .rodata. Set SEC_LOAD as well as
SEC_ALLOC for "alloc" string. Don't bother trying to find the
section; just use subseg_new.
* read.c (change_to_section): Removed. This is now done by
subseg_new.
(get_stab_string_offset): Rearranged somewhat. Create the section
using subseg_new. Store the string index in seg_info, rather than
in a static variable. Force the first string to be empty. Use
frag_more rather than FRAG_APPEND_1_CHAR.
(s_stab_generic): Rewrote.
* subsegs.h (segment_info_type): Added stabu union.
* subsegs.c (subseg_new): Initialize stab_string_size to 0.
* config/obj-aout.c: Don't include aout/stab_gnu.h.
(obj_aout_stab, obj_aout_desc): Removed.
(obj_pseudo_table): Removed desc and stabX entries.
* config/obj-bout.c: Same changes as config/obj-aout.c.
* config/obj-bout.h (S_SET_TYPE): Define.
(tc_bout_fix_to_chars): Declare.
* config/obj-coff.c (obj_coff_stab): Removed.
(obj_pseudo_table): Removed desc and stabX entries.
* config/obj-coff.h (SEPARATE_STAB_SECTIONS): Define.
* config/obj-coffbfd.c (current_stab_symbol): Removed.
* config/obj-coffbfd.h (obj_symbol_type): Removed n_strx, n_type,
n_other, n_desc and n_value fields.
(S_{S,G}ET_{OFFSET,OTHER,TYPE,DESC}): Removed.
(MAKE_STAB_SYMBOL): Removed.
* config/obj-ecoff.c (obj_ecoff_stab): Renamed to ecoff_stab.
Changed arguments and removed parsing code.
(obj_pseudo_table): Removed stabX entries.
* config/obj-ecoff.h (ecoff_stab): Declare.
(OBJ_PROCESS_STAB): Define.
* config/obj-elf.c: Don't include aout/stab_gnu.h.
(obj_elf_stab, obj_elf_xstab, obj_elf_desc,
elf_stab_symbol_string, elf_stab_symbol, obj_elf_stab_generic):
Removed.
(obj_pseudo_table): Removed desc, stabX and xstabs entries.
(obj_elf_version): Use subseg_new, not bfd_make_section. Don't
set SEC_LOAD for .note section.
(adjust_stab_sections): Get frag pointer from seg_info, rather
than looking through frags.
* config/obj-elf.h (S_{S,G}ET_{OTHER,TYPE,DESC}): Removed.
(SEPARATE_STAB_SECTIONS, INIT_STAB_SECTION, OBJ_PROCESS_STAB):
Define.
* config/obj-vms.c (obj_aout_stab): Removed.
(obj_pseudo_table): Removed stabX entries.
* config/obj-vms.h (S_SET_TYPE): Define.
* as.h: Declare listing.
* read.c: Don't declare listing.
(emit_expr): Cast fix_new_exp argument.
(parse_bitfield_cons): Correct printf format.
* symbols.c (symbol_new): Add cast to avoid warning.
* write.h: Declare text_last_frag and data_last_frag.
* config/obj-bout.c (obj_bout_line): Added dummy argument.
* config/obj-coffbfd.c: Add some casts to avoid warnings.
* config/tc-a29k.c: Likewise.
* config/tc-i960.c: Likewise. Also fully bracket structure
initializations, fix printf formats, and remove unused variables.
Mon Sep 13 16:48:38 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* read.c (s_desc): Only compile and use if S_SET_DESC is defined.
* struc-symbol.h: Declare verify_symbol_chain and
verify_symbol_chain_2 even if not SYMBOLS_NEED_BACKPOINTERS.
* symbols.c (verify_symbol_chain): Removed useless expression.
* write.c (headers, the_object_file): Only use if not
BFD_ASSEMBLER and not BFD.
(fixup_segment, cvs_frag_to_fill): Only use if BFD_ASSEMBLER or
not BFD.
(merge_data_into_text): Only use if BFD_ASSEMBLER or (not BFD and
not OBJ_AOUT).
* write.h: Declare relax_segment.
* config/obj-coffbfd.c (stack_pop, stack_push, stack_init): Made
static.
(stack_top): Commented out, since it's not used.
Fixed up pseudo-op functions to take an ignored int argument.
(size_section): Added default BAD_CASE to switch.
Changed bzero calls to memset.
* config/obj-coffbfd.h (S_IS_LOCAL): Call strchr on S_GET_NAME
(s), not on s itself.
* config/tc-a29k.c (s_use): Take ignored int argument. Only
define if OBJ_COFF is not defined.
* config/tc-i386.c: (fits_in_signed_byte, smallest_imm_type): Make
argument signed again.
* config/tc-m68k.c (s_bss, s_even, s_proc): Take ignored int
argument.
(m68k_ip): Fully bracket initialization of archs.
Correct several formats for __LINE__ to be %d rather than %s.
(init_table): Fully bracket initialization.
Cast values larger than 0x7f assigned to fr_opcode to char.
* subsegs.c: Renamed non-BFD_ASSEMBLER subseg_new to subseg_set.
Wrote non-BFD_ASSEMBLER subseg_new. Now subseg_new always takes a
section name, and subseg_set always takes a segT. Changed all
callers as appropriate.
* config/obj-coffbfd.c (change_to_section): Renamed to
obj_coff_add_segment. Corrected. Made callers use subseg_new.
* config/obj-coffbfd.h (obj_segment_name, obj_add_segment):
Define.
Mon Sep 13 13:15:03 1993 Doug Evans (dje@canuck.cygnus.com)
* config/tc-sparc.h (LOCAL_LABEL): Remove test for name[0] == 'L'.
Fri Sep 10 11:22:08 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-elf.h (S_SET_SIZE): Actually set the size.
Gcc lint.
* Added a number of casts to function calls.
* app.c (do_scrub_begin), as.c (main), expr.c (integer_constant,
operand, expr), read.c (read_begin, HANDLE_CONDITIONAL_ASSEMBLY,
read_a_source_file, s_align_bytes, demand_empty_rest_of_line,
ignore_rest_of_line, big_cons, is_it_end_of_statement, s_ignore),
read.h (is_name_beginner, is_part_of_name), config/obj-elf.c
(obj_elf_section), config/tc-i386.c (parse_register),
config/tc-sparc.c (isoctal, s_proc): Cast char
array indices to unsigned char.
* app.c (process_escape): Make static. Add prototype. Change
argument from char to int.
* as.c: Include output-file.h for prototypes. Comment out unused
function got_sig.
* Makefile.in (as.o): Depend on output-file.h.
* as.h (BAD_CASE): Cast val argument to long, and use %ld.
(pseudo_typeS): Add prototype to poc_handler field.
(print_version_id): Add prototype.
(xmalloc, xrealloc): Change size arguments to unsigned long.
(do_scrub_next_char): Add prototypes for function arguments.
(had_errors, had_warnings, scrub_from_file): Remove duplicate
declarations.
* atof-generic.c (atof_generic): Make size variables unsigned.
* cond.c (ignore_input): Removed unused local variable ptr.
* expr.c (floating_constant, integer_constant): Make static. Add
prototypes.
* flonum-copy.c (flonum_copy): Make size variables unsigned.
* frags.h: Add prototype for frag_init.
* hash.h, hash.c: Change hash values from char * to PTR, make hash
strings const, make returned error strings const char *. Added
prototypes for functions.
* input-file.h, input-file.c (input_file_buffer_size): Return
unsigned int.
* input-scrub.c (buffer_length): Make unsigned.
(input_scrub_push, input_scrub_pop): Make static.
* listing.c (list_symbol_table): Cast sprintf argument to unsigned
long and use %lx. Print name of segment rather than address of
structure.
(listing_list, listing_title): Change argument to int.
(listing_eject, listing_flags, listing_psize): Add int argument.
* listing.h: Corresponding declaration changes.
* obj.h (obj_emit_symbols): Rename prototype argument to avoid
shadowing.
* read.h: Change get_absolute_expression prototype to return
offsetT. Add prototype for next_char_of_string. Various
prototype changes.
* read.c: Remove prototype for next_char_of_string.
(pobegin): Make errtxt const. Make new_length, tmp_len and num
unsigned.
(s_abort, s_align_ptwo, s_comm, s_data, s_app_line, s_fill,
s_globl, s_lsym, s_org, s_set, s_text, s_desc): Add int argument.
Change all callers.
(s_comm): Change temp from valueT to offsetT. Cast to long when
printing and use %ld (only for error messages anyhow).
(s_long, s_int): Remove unused functions.
(cons): Change argument to int.
(emit_expr): Use %lx when printing longs.
(get_absolute_expression): Return offsetT, not long.
(get_stab_string_offset): Comment out unless
SEPARATE_STAB_SECTIONS.
(s_stab_generic): Remove unused offset. Define seg_is_new only
if SEPARATE_STAB_SECTIONS. Use toP only in local block.
* struc-symbol.h (verify_symbol_chain_2): Add prototype.
* symbols.c: Remove nested comment.
(symbol_new): Rename value to valu.
(colon): Use %ld and cast to long in error message.
* symbols.h: Remove duplicate verify_symbol_chain declaration.
* tc.h: Remove unused md_emit_relocations declaration.
(tc_gen_reloc): Add declaration.
* write.c (cvt_frag_to_fill): Change first argument name depending
on BFD_ASSEMBLER.
(write_relocs): Remove unused offset, frags. Remove tc_gen_reloc
declarations. Make n unsigned.
(write_contents): Remove unused i, n, relocs, fixp. Rename frags
to f to avoid shadowing.
(write_object_file): Define fragP only if not BFD_ASSEMBLER or not
WORKING_DOT_WORD. Remove unused keep. Only declare punt and
punt_it if they will be used. Make i and n unsigned.
(fixup_segment): Cast to long and use %ld in error message.
* xmalloc.c (xmalloc, xrealloc): Make size argument unsigned.
* config/obj-aout.h: Remove nested comment. Add prototype for
obj_aout_frob_symbol.
(obj_aout_line, obj_aout_desc): Add int argument.
* config/obj-ecoff.c: Changed build routines to use an unsigned
offset.
(add_string): Make len unsigned long.
(obj_ecoff_stab): Use %lu in error message.
* config/obj-elf.c (obj_elf_common): Comment out unused label
allocate_bss.
(obj_elf_frob_symbol): Return 0 (currently broken).
(obj_elf_desc, obj_elf_version, obj_elf_size, obj_elf_type,
obj_elf_ident, obj_elf_weak, obj_elf_local, obj_elf_common,
obj_elf_line, obj_elf_previous): Add int argument.
(obj_elf_write_symbol_p): Make static.
* config/obj-elf.h (obj_elf_write_symbol): Add prototype.
* config/tc-hppa.h: Remove declarations of functions declared in
read.h.
* config/tc-i386.c (ENCODE_RELAX_STATE): Cast to relax_substateT.
(s_bss): Add int argument.
(fits_in_signed_byte, smallest_imm_type): Make argument unsigned.
(dummy): Remove unused function.
(md_assemble): Rename local o to op to avoid shadowing.
(tc_gen_reloc): Rename local reloc to rel to avoid shadowing.
* config/tc-m68k.c (s_data1, s_data2): Add int argument.
* config/tc-mips.c (mips_ip, md_apply_fix): Cast to long and use
%ld in error messages.
* config/tc-sparc.c: Remove duplicate declarations.
(getExpression): Rewrite condition to avoid empty conditional
body.
(s_reg, s_proc, s_reserve, s_common, s_seg, s_xword): Add int
argument.
Thu Sep 9 17:10:00 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
Changes from Jeff Law:
* config/tc-hppa.c (md_assemble): Fix typo.
(pa_ip): Delete unused variables and labels. Do not check for
unsigned values being < 0, it can't happen.
(is_same_frag): Return a value in recursive call case.
(pa_callinfo): Delete unused variables and labels.
(pa_comm): Likewise.
(pa_copyright): Likewise.
(pa_export): Likewise.
(pa_import): Likewise.
(pa_param): Likewise.
(pa_space): Likewise.
(pa_subspace): Likewise.
Thu Sep 9 15:05:34 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* read.c (get_stab_string_offset, s_stab_generic): If
BFD_ASSEMBLER, call subseg_set rather than subseg_new.
Wed Sep 8 15:09:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-elf.c (obj_elf_section): Set SEC_LOAD when using
default flag values.
Tue Sep 7 10:22:52 1993 Stan Shebs (shebs@rtl.cygnus.com)
* read.c: (change_to_section): Don't include body if not MANY_SECTIONS.
* read.c: (s_stab, s_xstab, s_desc): New functions to parse
various stab-related directives.
* read.h: (s_stab, s_xstab, s_desc): New function prototypes.
* write.c: (merge_data_into_text): Fix ifdef tangle.
* config/obj-coffbfd.c (current_stab_symbol): Fake symbol
for stab reader to use.
* config/obj-coffbfdh.h (obj_symbol_type): Added fields for
stab reader, macros to access.
Fri Sep 3 16:44:03 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/obj-elf.h (elf_symbol): No longer special-cased on
sparcv9, since elf_symbol_type is now independent of size.
* config/obj-elf.h (elf_symbol): Fixed name of elf_symbol_type.
* config/tc-hppa.h (struct default_subspace_dict, struct
default_space_dict): Field "sort" is now unsigned char.
* config/tc-hppa.c (pa_def_subspaces, pa_def_spaces): Align
columns for easier reading.
(bcmp, index): Deleted USG-specific definitions. Should be dealt
with in ho-*.h, or in libiberty. Changed mention of index to
strchr.
(label_symbolP, label_symbol_defined, callinfo_found,
within_entry_exit, exit_processing_complete, within_procedure,
pa_def_subspaces, pa_def_spaces, pa_pseudo_op_moves_pc,
label_symbols_rootP, pa_get_label, pa_label_is_defined,
pa_undefine_label): Now static.
(movers): Now const, in addition to pointing to const data.
* config/tc-hppa.h (label_symbolS_rootP, pa_get_label,
pa_label_is_defined, pa_undefine_label, pa_pseudo_op_moves_pc):
Delete declarations.
Merged more changes from Jeff Law and Pete Hoogenboom:
* config/tc-hppa.c (pa_def_subspaces, pa_def_subspaces): Remove
entries for .stab and .stabstr.
* config/obj-elf.c: (elf_stab_symbol_string): Set the
SEC_LOAD attribute for the .stabstr section.
(obj_elf_stab_generic): Set the SEC_LOAD attribute for the
.stab section.
(obj_elf_stab_generic): Change '#if 1' to '#if 0'.
(obj_elf_stab_generic): Incorrect byte count on call to
md_number_to_chars function.
* config/tc-hppa.c (hppa_tc_symbol): Static functions need
argument relocation bits too.
* config/tc-hppa.c (pa_stringer): Correctly handle escaping
characters which should appear unaltered in the output string (for
example an escaped double-quote).
* config/tc-hppa.c (pa_parse_nonneg_cmpsub_cmpltr): Always
initialize name.
(pa_parse_neg_cmpsub_cmpltr): Likewise.
(pa_parse_nonneg_add_cmpltr): Likewise.
(pa_parse_neg_add_cmpltr): Likewise.
* config/tc-hppa.h (parse_cons_expression_hppa): Remove prototype
for now.
(cons_fix_new_hppa): Likewise.
* config/tc-hppa.c (md_apply_fix): Fix type of valp to match
prototype.
* config/tc-hppa.c: Include libhppa.h.
* config/tc-hppa.h: Delete extern declarations of functions
found in libhppa.h.
* config/tc-hppa.c (pa_space): Rework to avoid unwanted #ifdef
OBJ_ELF conditionals.
* config/tc-hppa.h (LOCAL_LABEL): Correctly identify local labels
on the PA.
Thu Sep 2 10:43:57 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (macro_build): Accept 'z', and ignore it.
(macro): Use "z,s,t" for div instructions to match corresponding
change in opcode table.
(mips_ip): Added 'z'--must be zero register.
Wed Sep 1 15:56:42 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* write.c (write_relocs) [RELOC_EXPANSION_POSSIBLE]: Declare
tc_gen_reloc correctly.
* configure.in: Use "case" instead of "if" when possible. Rewrote
Makefile editing to reduce work done. Treat "hppa*" as "hppa".
Wed Sep 1 12:19:07 1993 K. Richard Pixley (rich@sendai.cygnus.com)
* config/obj-coffbfd.c (obj_coff_section): add 'd' as an alias for
section type of data. 'd' seems to be used for m88k.
Wed Aug 25 22:33:22 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (mips_align, s_stringer, s_cons, s_float_cons,
s_mips_space): Set insn_label to NULL to avoid changing it at the
next .align statement.
(append_insn): Don't swap jal with instruction that sets the
register that jal sets.
Wed Aug 25 16:15:57 1993 K. Richard Pixley (rich@sendai.cygnus.com)
* configure.in: recognize m88110.
Wed Aug 25 13:37:46 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
Merged changes from Pete Hoogenboom and Jeff Law at Utah:
* config/tc-hppa.c (pa_build_unwind_subspace): SEC_ALLOC should
not be on for .hppa_unwind.
(md_pseudo_table): .PARAM and .param are valid pseudo-ops for GAS.
(pa_param): New function to handle .PARAM directives.
(pa_ip): Pass "isbranch" argument down to pa_parse_*_compltr
functions. Handle '|' for movb; allow movb,n.
(pa_parse_nonneg_cmpsub_cmpltr): Delete old useless
version. Handle cases where no completer exists for
comb,n or addb,n.
(pa_parse_neg_cmpsub_cmpltr): Handle cases where no
completer exists for comb,n or addb,n. Make logic
mirror that of pa_parse_nonneg_cmpsub_cmpltr.
(pa_parse_nonneg_add_cmpltr): Likewise.
(pa_parse_neg_add_cmpltr): Likewise.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-hppa.h (pa_param): Declare.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Tue Aug 24 15:41:35 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-hppa.c (hppa_tc_make_symextn_section): Now static.
Added forward declaration.
Merged changes from Pete Hoogenboom and Jeff Law at Utah:
* config/obj-elf.c (elf_frob_file): Arguments were incorrect on
call to elf_tc_make_sections.
(obj_elf_version): A .note section shouldn't have the SEC_ALLOC
attribute.
* config/tc-hppa.c (hppa_tc_make_sections): Add some processing to
handle symbol extension sections.
* config/tc-hppa.c (pa_build_symextn_section): New function to
create a symbol extension section.
(pa_export_args): Make call to pa_build_symextn_section.
(hppa_tc_symbol, hppa_tc_make_sections,
hppa_tc_make_symextn_section): New functions.
* config/tc-hppa.h: Update elf_tc_symbol and elf_tc_make_sections
macros.
* read.c (emit_expr): Place check for TC_CONS_FIX_NEW in the
BFD_ASSEMBLER branch as well.
* config/tc-hppa.h: If ELF is the target object format, define
some ELF- and hppa-specific types and constants.
* config/tc-hppa.c (getExpression): Fix a typo.
* read.c (read_a_source_file): Use TC_EQUAL_IN_INSN to determine
if a `=' is part of an instruction.
(read_a_source_file): Handle case where end-of-line markers are
also used within instructions.
* config/tc-hppa.h (TC_EQUAL_IN_INSN, TC_EOL_IN_INSN): Define.
* config/tc-hppa.c (md_apply_fix_1): Keep relocations for
out-of-range branches/'calls using "bl" or calls which may need
argument relocation stubs. Do not need/keep relocations for
conditional branches.
(elf_hppa_final_processing): Fix calculation of function size.
* config/obj-elf.c (obj_elf_version): Mark .note section as
READONLY.
* config/tc-hppa.c (parse_cons_expression_hppa): Pass exp, not the
address of exp, to expression.
(pa_build_unwind_subspace): Turn SEC_HAS_CONTENTS flag on.
(md_apply_fix_1): Delete unwanted comments.
(process_exit): Symbols marking the end of a function are always
BSF_LOCAL.
* config/tc-hppa.c: Include elf32-hppa.h from BFD tree.
(pa_space): Declare and initialize gdb_section.
* config/obj-elf.c (elf_frob_file): Change
elf_tc_final_processing_hook to elf_tc_final_processing.
* config/tc-hppa.c (fix_new_hppa): Fix argument list to match
argument type declarations.
(getExpression): Fix typo.
(pa_export_args): Change elf_symbol_type to elf32_symbol_type.
(elf_hppa_final_processing): Likewise. Name changed from
elf_hppa_final_processing_hook.
(start_symbol_root, start_symbol_last): Deleted.
* config/tc-hppa.h (TC_PARSE_CONS_EXPRESSION): Fix typo.
* config/tc-hppa.h: Replace "symbolS" with "struct symbol" to
avoid changing include ordering.
* config/tc-hppa.c (pa_ip, case 'y'): Handle just like 't'.
Mon Aug 23 12:47:58 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (set_at): Added unsignedp argument. Use
load_register.
(set_at_unsigned): Removed; changed callers to use set_at.
(load_register): Removed unused ip argument. Changed callers.
(append_insn): Don't swap branch and branch likely.
(macro_build): Handle 'u'.
(load_register): Handle 64 bit constants.
(macro): Added M_DABS, removed M_ABSU. Numerous changes to
support 64 bit constants.
(mips_ip): Use hex constants in range checks for clarity.
(md_number_to_chars): Support 8 byte values.
Fri Aug 20 16:50:59 1993 K. Richard Pixley (rich@sendai.cygnus.com)
* config/tc-m88k.h: updated copyrights.
(TC_CONS_RELOC): declare to be RELOC_32.
Fri Aug 20 11:16:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (mips_isa): New static variable.
(md_begin): Initialize mips_isa based on TARGET_CPU. Don't sanity
check macros. Set text alignment and GP size here.
(md_assemble): Don't set text alignment and GP size here.
(append_insn): Don't insert NOPs for load delays if mips_isa >= 2.
Use the right mask and shift for WRITE_FPR_T and WRITE_FPR_S. Add
a NOP after a branch likely.
(mips_emit_delays): Don't insert NOPS for load delays if mips_isa
>= 2.
(macro): Support r6000 and r4000 macros.
(mips_ip): Check insn ISA level against mips_isa before using it.
Added 'x' case for ignored register.
(md_parse_option): Handle -mipsN and -mcpu=XX.
Fri Aug 20 01:26:52 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-i386.c (md_pseudo_table) [OBJ_ELF]: Handle ".zero".
Thu Aug 19 12:15:18 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-sparc.c (s_local): Function moved and renamed...
* config/obj-elf.c (obj_elf_local): ...to here.
* config/tc-sparc.c (md_pseudo_table), config/obj-elf.c
(obj_pseudo_table): Move handling of ".local".
* tc.h (md_parse_option): Don't declare if defined as a macro.
* config/tc-i386.h (NO_RELOC) [BFD_ASSEMBLER]: Define as
BFD_RELOC_NONE.
(md_parse_option): New macro, converted from function.
* config/tc-i386.c (md_parse_option): Function deleted.
(comment_chars) [OBJ_ELF]: Include "/".
(line_comment_chars) [OBJ_ELF || TE_I386AIX]: Don't include "/".
(md_assemble): Cast 0xe9 to char explicitly, to avoid compiler
warning.
(md_assemble, md_estimate_size_before_relax, md_create_long_jump):
Call reloc for fix_new type, or use correct enumerator, instead of
always using NO_RELOC.
(i386_operand): Change "ifndef I386COFF" to "ifdef OBJ_AOUT" for
tests for valid section.
(md_convert_frag) [BFD_ASSEMBLER]: Compensate for frag start
address.
(md_apply_fix_1) [BFD_ASSEMBLER]: For pc-relative reloc with
symbol, compensate for location of reloc.
(reloc, BFD_RELOC_32, BFD_RELOC_32_PCREL) [!BFD_ASSEMBLER]: Define
to return zero.
Wed Aug 18 16:51:29 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/obj-elf.c: Undef NO_RELOC before including aout/aout64.h.
(obj_elf_weak): New function.
(obj_pseudo_table): Handle ".weak".
(obj_elf_section): If section directive includes a string, ignore
it for now. Accept "progbits" flag.
(obj_elf_type): Accept `@' before flag name.
* write.c (relax_and_size_seg) [BFD_ASSEMBLER]: Get rid of `if(1)'
condition.
(fixup_segment) [BFD_ASSEMBLER]: Use bfd_is_com_section, rather
than checking for bfd_com_section directly.
(fixup_segment): Simplify range check.
(fixup_segment) [OBJ_COFF && TC_I960]: Simplify cpp condition
test.
* symbols.h (S_SET_WEAK): Declare.
* symbols.c (S_SET_WEAK): New function.
(S_SET_EXTERNAL, S_CLEAR_EXTERNAL): Don't bother with BSF_EXPORT,
it's not a separate flag any more. Clear BSF_WEAK.
* read.c (potable): Treat "string" like "asciz".
Wed Aug 18 15:30:29 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (append_insn): Don't swap branch instructions
if .set nobopt or .set volatile.
(gp_reference): .lit8 and .lit4 are accessed via the GP register.
(macro): Added cases M_LI_S, M_LI_SS. Fixed M_LI_D and M_LI_DD.
(mips_ip): Added cases 'F', 'L', 'f', 'l' for floating point.
* config/obj-ecoff.c: Renamed some variables to avoid shadow
warnings.
Mon Aug 16 14:16:02 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com)
* config/obj-coff.h (S_IS_COMMON): add missing backslash
* configure.in (z8k-*-{coff,sim}): use coffbfd for this target
Thu Aug 12 11:47:58 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (mips_ip): Suggested by
davidj@ICSI.Berkeley.EDU (David Johnson): Don't accept symbolic
names for 'E' and 'G' argument types (coprocessor registers) and
don't warn if $1 is used on the coprocessor.
(macro): Handle M_{L,S}WC{0,2,3}_AB correctly.
Mon Aug 9 12:09:14 1993 Doug Evans (dje@canuck.cygnus.com)
* read.c (emit_expr): Use BFD_RELOC_16 for 2-byte values.
* config/tc-sparc.c (md_apply_fix, tc_gen_reloc): Handle
BFD_RELOC_16.
* config/tc-sparc.h (WORKING_DOT_WORD): Define.
Mon Aug 9 13:36:22 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* write.c (merge_data_into_text): Define only if BFD_ASSEMBLER is
defined or BFD is not.
(relax_and_size_all_segments): Declare local variable fragP.
Fri Aug 6 15:22:53 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-sparc.c (md_apply_fix, case BFD_RELOC_32): Fill in
bytes with real values, not zeros.
Fri Aug 6 10:57:59 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* configure.in (mips-*-riscos*, mips-*-sysv*): New (untested)
targets, using ecoff and mips-big.
* config/tc-mips.c (mips_ip): From davidj@ICSI.Berkeley.EDU (David
Johnson): Added case for 'C' for coprocessor instruction codes.
Thu Aug 5 13:08:56 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-sparc.c (md_apply_fix, case BFD_RELOC_64): Fill in
bytes with real values, not zeros.
(md_pseudo_table): Call cons for .uaxword.
* config/obj-elf.c (obj_pseudo_table): Handle ".8byte".
* read.c (emit_expr): Use BFD_RELOC_64 for 8-byte expressions.
* write.c (write_object_file): Test DEBUG_SYMS instead of DEBUG
for verifying symbol chain.
(merge_data_into_text, relax_and_size_all_segments): New
functions, split out from write_object_file.
Tue Aug 3 15:43:55 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/obj-elf.c (obj_elf_stab_generic, in disabled code): If
debug section is new, allocate an extra 12 bytes at its start. If
".stabs" type is N_SO, fill in filename symbol field of that first
entry. Return early if "goof", to simplify later code slightly.
(adjust_stab_sections): New function.
(elf_frob_file): Apply adjust_stab_sections to each section.
* config/obj-elf.c (obj_elf_section, obj_elf_previous): No longer
static.
* config/obj-elf.h (obj_elf_section, obj_elf_previous): Declare.
* config/tc-sparc.c (md_pseudo_table): Call them for "pushsection"
and "popsection", and call cons for "uaword" and "uahalf".
* config/obj-elf.c (obj_elf_version): Use English in error
messages.
Tue Aug 3 11:29:06 1993 Ian Lance Taylor (ian@cygnus.com)
* config/obj-ecoff.c: Updated for BFD ECOFF changes. Now gets the
swapping routines and external structure sizes via the
ecoff_backend information. No longer includes coff/mips.h.
Mon Aug 2 17:35:48 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-ecoff.c (get_tag): Save tag name in permanent memory
and in hash_ptr->string.
* app.c (do_scrub_next_char): Reset state to 0 after .appline if
file name is not seen.
Mon Aug 2 11:51:41 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-sparc.c (md_apply_fix, case BFD_RELOC_64): New case,
parallel to BFD_RELOC_32.
(tc_gen_reloc): Accept BFD_RELOC_64.
Thu Jul 29 22:21:28 1993 Ian Lance Taylor (ian@cygnus.com)
* write.c: Don't use short int in a prototype.
* expr.c (operand): Make return value simply depend on contents of
returned expression.
Thu Jul 29 18:38:37 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com)
* configure.in: sparc*-aout and sparc*-vxworks are BFD assemblers
Thu Jul 29 18:38:37 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com)
* config/ho-sunos.h: remove some old function decls that conflict
w/ ANSI, and which weren't needed anyway
Wed Jul 28 16:34:55 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/obj-elf.h (obj_frob_symbol): Renamed from tc_frob_symbol,
and disabled since it breaks Ian's new symbol-value code.
* expr.c (integer_constant): Accept more digits if BFD64.
Wed Jul 28 11:30:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-m68k.c (m68k_ip): If we have a normal constant when we
expect a bignum, turn it into a bignum. Output extra zeroes
before a short bignum, rather than after.
Tue Jul 27 15:54:27 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* symbols.c (symbol_new): Conditionalize verify_symbol_chain call
on DEBUG_SYMS, not DEBUG.
(symbol_remove): Likewise.
(symbol_insert): Likewise.
Tue Jul 27 08:45:05 1993 Ian Lance Taylor (ian@cygnus.com)
* config/tc-mips.c (mips_optimize): New static variable.
(append_insn): If mips_optimize == 0, always insert NOP
instructions. If mips_optimize < 2, don't swap branches.
(md_parse_option): If -Ox or -gx, set mips_optimize accordingly.
Mon Jul 26 18:02:43 1993 K. Richard Pixley (rich@sendai.cygnus.com)
* Makefile.in (clean): if testsuite does not exist, then skip it.
Fri Jul 23 14:13:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-mips.c (prev_insn_unreordered,
prev_prev_insn_unreordered): New static variables.
(append_insn): Don't swap branch instruction if
prev_prev_insn_unreordered (see comment).
(mips_no_prev_insn): Clear the unreordered variables.
(s_mipsset): When turning on reordering, set the unreordered
variables.
Fri Jul 23 13:09:44 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/obj-elf.c (obj_elf_section): Sections ".init" and ".fini"
are also magic, and have special default flag settings.
(obj_elf_frob_symbol): Since the return value from this function
isn't used, don't bother calling obj_elf_write_symbol_p, since it
doesn't accomplish anything else.
* config/tc-sparc.c (md_section_align): Round up section size only
for a.out format.
* symbols.c: Don't define DEBUG by default.
Thu Jul 22 12:09:41 1993 Ian Lance Taylor (ian@cygnus.com)
* write.c (fix_new_exp): Handle a O_uminus expression.
* expr.c (expr): Don't let absolute_section override
undefined_section for the return value.
* read.c (read_a_source_file): In NO_PSEUDO_DOT case, if we find a
pseudo-op with a poc_handler field of NULL, ignore it and treat it
as an instruction instead.
* config/tc-m88k.c (md_pseudo_table): Add "set" with a NULL
poc_handler field.
* config/tc-h8500.c (md_begin): Use a local variable when
initializing md_relax_table to avoid warnings about modifying a
supposedly const data structure.
Thu Jul 22 10:58:51 1993 Brendan Kehoe (brendan@lisa.cygnus.com)
* config/obj-aout.c: Only include aout/aout64.h if BFD_ASSEMBLER
is defined.
Wed Jul 21 17:32:02 1993 Fred Fish (fnf@deneb.cygnus.com)
* configure.in (case ${host}): Map *-*-sysv4* to gas_host=sysv.
* configure.in (case ${generic_target}): Add i[34]86-*-sysv4*
case to set obj_format=elf. Must go before i386-*-sysv* case that
sets obj_format=coffbsd. Add *-*-sysv4* to *-*-elf and
*-*-solaris case, and move to before *-sysv* case that wants to
set obj_format to coff.
* config/tc-i386.c (i386_operand): Change all 'exp.X_op' to
'exp->X_op'.
* config/tc-i386.c (md_apply_fix): Fix valp to be 'valueT *' for
BFD_ASSEMBLER case.
Wed Jul 21 12:47:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-aout.c: Include aout/aout64.h.
(obj_aout_frob_symbol): Set BSF_DEBUGGING for a constructor
symbol, so that BFD doesn't tamper with the type.
* read.c (read_a_source_file): If NO_PSEUDO_DOT is defined, look
up opcodes as pseudo-ops even if they don't start with '.'.
* config/tc-m88k.h (NO_PSEUDO_DOT): Define.
* config/tc-m88k.c (md_assemble): Removed special pseudo-op
handling.
(md_apply_fix): Set fx_offset to the upper 16 bits of the reloc.
Output the low 16 bits for RELOC_HI16, not the high 16 bits.
* config/obj-coffbfd.c (do_relocs_for): If TC_M88K, set the
r_offset field of the reloc to the fixup offset.
(fixup_segments): If TC_M88K, don't warn about fixup overflows.
* doc/as.texinfo: Minor updates.
Tue Jul 20 19:28:56 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* Extensive changes to permit symbols to contain any expression
type and to delay the computation of the expression until the
value is actually needed. This permits setting symbols to values
calculated based on object code size. Expressions were changed to
no longer be in a section, to stop the overloading of segment and
expression type that previously occurred.
* as.c (big_section, pass1_section, diff_section, absent_section):
Removed.
(expr_section): Added (used for dummy symbols which hold
intermediate expression values).
(perform_an_assembly_pass): Create expr_section, do not create the
sections now removed.
* as.h (segT): Removed SEG_ABSENT, SEG_PASS1, SEG_BIG, and
SEG_DIFFERENCE. Added SEG_EXPR.
(SEG_NORMAL): Corresponding changes.
* subsegs.c (seg_name, subsegs_begin): Changed accordingly.
* write.c (write_object_file): Ditto.
* config/obj-aout.c (seg_N_TYPE): Ditto.
* config/obj-bout.c (seg_N_TYPE): Ditto.
* config/obj-coff.c (seg_N_TYPE): Ditto.
* config/obj-coffbfd.c (seg_N_TYPE): Ditto.
* config/obj-vms.c (seg_N_TYPE): Ditto.
* expr.h (operatorT): Moved in from expr.c, added some values.
(expressionS): Added X_op field, removed X_seg field; renamed
X_subtract_symbol to X_op_symbol.
* expr.c: Extensive changes to assign expression types rather than
sections and to simplify the parsing.
* write.c (fix_new_internal): New static function.
(fix_new): Removed sub_symbol argument.
(fix_new_exp): New function, takes expression argument.
* write.h: Prototype changes for fix_new and fix_new_exp.
* cond.c (s_if): Changed accordingly.
* read.c (s_lsym, pseudo_set, emit_expr, parse_bitfield_cons,
parse_repeat_cons, get_segmented_expression,
get_known_segmented_expression, get_absolute_expression): Ditto.
* symbols.c (resolve_symbol_value, S_GET_VALUE, S_SET_VALUE):
Ditto.
* write.c (write_object_file): Ditto.
* config/obj-coff.c (obj_coff_def, obj_coff_val): Ditto.
* config/obj-coffbfd.c (obj_coff_def, obj_coff_val,
obj_coff_endef, yank_symbols): Ditto.
* config/obj-elf.c (obj_elf_stab_generic, obj_elf_size): Ditto.
* config/tc-a29k.c (md_assemble, parse_operand, machine_ip,
print_insn, md_operand): Ditto.
* config/tc-h8300.c (parse_exp, colonmod24, check_operand,
do_a_fix_imm, build_bytes): Ditto.
* config/tc-h8500.c (parse_exp, skip_colonthing, parse_reglist,
get_specific, check, insert, md_convert_frag): Ditto.
* config/tc-hppa.c (the_insn, fix_new_hppa, cons_fix_new_hppa,
md_assemble, pa_ip, getExpression, getAbsoluteExpression,
evaluateAbsolute, pa_build_unwind_subspace, pa_entry,
process_exit): Ditto.
* config/tc-hppa.h (STAB_FIXUP, is_DP_relative, is_PC_relative,
is_complex): Ditto.
* config/tc-i386.c (pe, md_assemble, i386_operand,
md_estimate_size_before_relax, md_create_long_jump): Ditto.
* config/tc-i860.c (md_assemble, getExpression, print_insn):
Ditto.
* config/tc-i960.c (parse_expr, subs, segs, md_convert_frag,
get_cdisp, mem_fmt, parse_ldconst, relax_cobr, s_sysproc,
i960_handle_align): Ditto.
* config/tc-m68k.c (struct m68k_exp, struct m68k_it, seg, op,
subs, add_fix, isvar, m68k_ip, md_assemble, md_convert_frag_1,
md_estimate_size_before_relax, md_create_long_jump, get_num):
Ditto.
* config/tc-m88k.c (md_assemble, get_imm16, get_pcr,
md_create_short_jump, md_create_long_jump): Ditto.
* config/tc-mips.c (md_assemble, append_insn, gp_reference,
macro_build, macro, my_getExpression): Ditto. Also removed
get_optional_absolute_expression; just use get_absolute_expression
instead.
* config/tc-ns32k.c (get_addr_mode, evaluate_expr, convert_iif,
fix_new_ns32k, fix_new_ns32k_exp, cons_fix_new_ns32k): Ditto.
* config/tc-ns32k.h (fix_new_ns32k prototype): Ditto.
* config/tc-sh.c (parse_exp, check, insert, md_convert_frag):
Ditto.
* config/tc-sparc.c (md_assemble, sparc_ip, getExpression,
print_insn): Ditto.
* config/tc-tahoe.c (struct top, md_estimate_size_before_relax,
tip_op, md_assemble): Ditto.
* config/tc-vax.c (seg_of_operand, md_assemble,
md_estimate_size_before_relax, md_create_long_jump): Ditto.
* config/tc-z8k.c (parse_exp, check_operand, newfix): Ditto.
Tue Jul 20 12:17:16 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com)
* configure.in: i386-lynx is the same as i386-coff
Mon Jul 19 15:21:20 1993 Ken Raeburn (raeburn@rtl.cygnus.com)
* config/obj-elf.c (obj_elf_previous): New function.
(previous_section, previous_subsection): New vars.
(obj_elf_section): Save current place in case DWARF code wants us
to pop back to it. Handle unquoted section name as well as quoted
section name. Don't crash on invalid strings.
(obj_pseudo_table): Handle new pseudos "previous", "2byte", and
"4byte".
* config/obj-elf.h: Don't include struc-symbol.h.
(obj_elf_frob_symbol): Declare arg as struct symbol *.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-sparc.h (LOCAL_LABEL) [OBJ_ELF]: Local labels can start with
19990502 sourceware import
1999-05-03 09:29:11 +02:00
"L" or "_.L_".
* write.c (write_relocs): New function, split off from
write_contents. Use memset instead of bzero.
(write_object_file): Apply write_relocs to each section before
applying write_contents.
* read.c (read_begin): Call obstack_begin with values closer to 1K
multiples.
(read_a_source_file, big_cons, float_cons): Use memcpy instead of
bcopy.
Mon Jul 19 14:30:00 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/tc-m68k.c (m68k_ip_op): Don't decrement strend when
calculating opP->isiz; this permits the expression size to be
determined as well, later on.
* expr.c (clean_up_expression): Don't cancel the subtraction of
undefined symbols.
* read.c (s_data), config/obj-coffbfd.c (obj_coff_data): If -R,
switch to text section rather than data section.
Mon Jul 19 12:35:39 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-m68k.c (m68k_ip, case AINDX): Add 6 to operand
expression (to take the pc-rel instruction itself into account)
before using the expression, instead of after.
Fri Jul 16 08:56:04 1993 Ian Lance Taylor (ian@cygnus.com)
* read.c (float_cons): Simplified parsing logic. If
REPEAT_CONS_EXPRESSIONS is defined, accept a repeat count.
* symbols.c (colon): Rather than a special case for TC_HPPA,
use new macro tc_frob_label.
* config/tc-hppa.h (tc_frob_label): Define.
* config/tc-mips.c: Many changes to support simple assembler
optimization.
(insn_label, prev_insn, prev_prev_insn, dummy_opcode,
prev_insn_valid, prev_insn_frag, prev_insn_where,
prev_insn_fixp, prev_insn_is_delay_slot): New static
variables.
(insn_uses_reg, mips_no_prev_insn, mips_emit_delays,
mips_align, s_stringer, s_mips_space): New static functions.
(mips_define_label): New global function.
(md_pseudo_table): For "ascii", "asciz", "asciiz", call
s_stringer. Changed argument to float_cons from 0 or 1 to 'f'
or 'd'. For "space" call s_mips_space.
(md_begin): Call mips_no_prev_insn.
(append_insn): Only insert necessary NOP instructions.
(macro): Call mips_emit_delays before setting mips_noreorder.
Increment and decrement mips_noreorder rather than using
save_reorder_condition. Don't bother to use noreorder in
M_L_DOB and M_L_DAB, since append_insn will not insert a NOP.
(md_atof): Handle floating point numbers correctly for both
big and little endian targets.
(s_align, s_cons): Call mips_align rather than frag_align.
(s_change_seg, s_cons): Call mips_emit_delays.
(s_float_cons): Let float_cons do the work.
(s_mipsset): Call mips_emit_delays when setting noreorder.
* config/tc-mips.h (tc_frob_label): Define to be
mips_define_label.
* config/obj-ecoff.c (ecoff_build_symbols, ecoff_build_procs,
ecoff_frob_files): Consistently use S_GET_VALUE rather than
bfd_asymbol_value. Warn if taking difference of symbols in
different segments.
Thu Jul 15 11:51:03 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* config/obj-ecoff.c (ecoff_frob_file): Discard all open scopes,
with a warning.
* config/obj-coffbfd.c (fixup_segment): If TC_M88K, don't adjust
by md_pcrel_from if we are relocating against a symbol (we still
need md_pcrel_from for a PC relative relocation within the same
file).
* config/tc-m88k.c (md_pcrel_from): Corrected return value.
(omagic): Removed unused variable.
* Preliminary support for m88k-coff.
* configure.in (m88k-*-coff*): New target. Use coffbfd and
m88kcoff.
* config/m88kcoff.mt: New file.
* read.c (lex_type): New macro LEX_AT to set lex type of '@'.
(pseudo_set): Handle difference of symbols in different fragments
by saving the entire expression as the value of the symbol.
* symbols.c (resolve_symbol_value): Resolve difference
expressions.
* config/obj-coffbfd.c (obj_pseudo_table): If TC_M88K, accept
"sdef" as a synonym for "def".
* config/obj-coffbfd.h: If TC_M88K, include coff/m88k.h and set
TARGET_FORMAT.
(S_IS_LOCAL): Any symbol which includes \001 in the name is local.
* config/tc-m88k.c, config/tc-m88k.h: Numerous changes to bring
m88k port up to date, and to add COFF support.
Wed Jul 14 15:09:32 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* Removed sy_forward and replaced it with an undefined expression
as the value of a symbol.
* struc-symbol.h (struct symbol): Removed sy_forward field. Added
sy_resolved and sy_resolving single bit fields.
* symbols.c (symbol_new): Don't initialize sy_forward field.
(resolve_symbol_value): New function to adjust symbol value by
fragment address, using recursion to resolve forward symbols.
* symbols.h: Added prototype for new function.
* read.c (pseudo_set): Set symbolP->sy_value to an undefined
expression rather than setting symbolP->sy_forward.
* write.c (write_object_file): Use resolve_symbol_value on
symbols, keeping the common case (the old behaviour) inline.
* config/obj-aout.c (obj_aout_frob_symbol): Removed sy_forward
handling (subsumed by write.c change).
* config/obj-coff.c, config/obj-coffbfd.c (obj_coff_val): Set
sy_value rather than sy_forward.
* config/obj-coffbfd.c (obj_coff_endef, yank_symbols): Check
expression segment rather than sy_forward.
(yank_symbols): Use resolve_symbol_value.
(crawl_symbols): Removed extra pass over symbols.
* config/obj-aout.c, config/obj-bout.c, config/obj-coff.c,
config/obj-vms.c (obj_crawl_symbol_chain): Removed extra pass over
symbols which handled sy_forward; use resolve_symbol_value
instead.
* config/obj-coff.h, config/obj-coffbfd.h (obj_frob_forward_symbol):
Define.
* config/obj-elf.c (obj_elf_stab_generic): Check expression
segment rather than sy_forward.
* config/obj-vms.c (VMS_Check_For_Main): Don't initialize
sy_forward; do initialize sy_resolved and sy_resolving.
* config/tc-hppa.h (STAB_FIXUP): Use sy_value, not sy_forward.
* Changes to keep a full expression as the value of a symbol, not
just a longword:
* struc-symbol.h: New field sy_value.
* as.h: Include expr.h before struc-symbol.h.
* expr.h: Use struct symbol rather than symbolS.
* symbols.c (S_GET_VALUE, S_SET_VALUE): Rewrote to retrieve value
of sy_value field; compile unconditionally, not just if
BFD_ASSEMBLER.
* symbols.h: Compile S_{SG}ET_VALUE prototypes unconditionally.
* write.c (write_object_file): Set BFD symbol value to gas symbol
value.
* config/obj-aout.h, config/obj-bout.h, config/obj-coff.h,
config/obj-coffbfd.h, config/obj-generic.h, config/obj-vms.h
(S_GET_VALUE, S_SET_VALUE): Removed macro definitions.
* config/obj-ieee.c (S_GET_VALUE, S_SET_VALUE): Removed.
* config/obj-coff.h, obj-coffbfd.h: Rewrote several macros to use
S_GET_VALUE rather than ost_entry.n_value.
* config/obj-aout.c (obj_symbol_to_chars), config/obj-bout.c
(obj_symbol_to_chars), config/obj-coff.c (obj_symbol_to_chars),
config/obj-coffbfd.c (symbol_to_chars): Get value to write out
using S_GET_VALUE--don't assume it is already set.
* config/obj-ieee.c (do_symbols): Set BFD symbol value to gas
symbol value.
* config/obj-vms.c (various): Don't assign directly to
S_GET_VALUE; use S_SET_VALUE instead.
Wed Jul 14 09:35:23 1993 Doug Evans (dje@canuck.cygnus.com)
* configure.in: Make sparc64-*-aout* use bfd gas.
* configure.in: Recognize h8300h.
Tue Jul 13 12:09:44 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
* config/tc-h8500.c (line_comment_chars): Add hash.
(parse_exp, skip_colonthing, build_bytes): Add support for
R_H8500_HIGH16 relocation type.
Mon Jul 12 11:15:34 1993 Ken Raeburn (raeburn@deneb.cygnus.com)
* config/obj-elf.c (obj_elf_section): Allow `@' to introduce an
attribute name. Handle `execinstr' attribute.
Mon Jul 12 07:22:28 1993 Ian Lance Taylor (ian@cygnus.com)
* config/tc-mips.c (mips_ip): Don't warn on 'i' or 'j' mismatch if
there is another alternative for the instruction.
Fri Jul 9 17:31:34 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* doc/as.texinfo: updates for H8/300H
Thu Jul 8 14:41:43 1993 Mark Eichin (eichin@cygnus.com)
* config/tc-i960.c (md_create_short_jump, md_create_long_jump,
md_number_to_chars, md_section_align): Adjusted to use valueT,
addressT, to match tc.h.
Thu Jul 8 14:15:05 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-sparc.c (s_common): Revamp to handle both syntaxes,
independent of format.
Thu Jul 8 07:25:25 1993 Doug Evans (dje@canuck.cygnus.com)
* ChangeLog-9295: Fix a typo. * README: Likewise. * config/tc-d10v.c: Fix a comment typo. * config/tc-dlx.c: Likewise. * config/tc-h8300.h: Likewise. * config/tc-h8500.h: Likewise. * config/tc-mips.c: Likewise. * config/tc-s390.c: Likewise. * config/tc-sh.h: Likewise. * config/tc-tic80.h: Likewise. * config/tc-w65.h: Likewise. * config/tc-z8k.c: Likewise. * config/tc-z8k.h: Likewise. * testsuite/gas/h8300/cmpsi2.s: Likewise.
2002-12-17 02:13:56 +01:00
* config/tc-h8300.h (TC_CONS_RELOC): Use R_RELLONG if H8/300H.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Wed Jul 7 18:11:07 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
* configure.in: define CROSS=-DCROSS_COMPILE if it is a cross
build; also recognize h8300-*-coff
Wed Jul 7 10:21:24 1993 Ian Lance Taylor (ian@cygnus.com)
* symbols.c (fb_label_instance, fb_label_instance_inc): Don't dump
core just because somebody uses a label before it is defined.
* config/mips-opcode.h: Moved to opcode/mips.h.
* config/tc-mips.c: Include opcode/mips.h rather than
mips-opcode.h.
(append_insn): An extra NOP is only needed after instructions
which set HI or LO, not after instructions which read it.
(macro_build, mips_ip): Support new 'E', 'G' and 'B' arguments.
(macro): cfc1 and ctc1 now take "t,G" rather than "t,d".
* config/tc-mips.h (struct mips_opcode): Don't define.
* config/mips-big.mt, config/mips-lit.mt (TARG_CPU_DEPENDENTS):
Set to $(srcdir)/../include/opcode/mips.h.
Get the MIPS assembler up to speed with other gas changes:
* config/obj-ecoff.c (ecoff_set_vma, ecoff_frob_symbol):
Removed; don't change the symbol value.
(ecoff_build_symbols, ecoff_build_procs, ecoff_frob_file): Use
bfd_asymbol_value rather than S_GET_VALUE to include section
vma in symbol value.
(ecoff_frob_file): Ignore BSF_SECTION_SYM symbols, since ECOFF
doesn't output them. Set the vma of sections.
* config/obj-ecoff.h: Don't define obj_frob_symbol.
* config/tc-mips.c (tc_gen_reloc): Adjustment by section vma is no
longer necessary.
(various): use valueT rather than long.
Wed Jul 7 08:33:30 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-sparc.h (ENV64): Define for v9.
* config/tc-sparc.c (s_xword): For numbers, call big_cons.
(sparc_ip, md_apply_fix, tc_gen_reloc): Handle some sparc64
relocation types.
(md_number_to_chars): Handle 8-byte value.
* config/obj-elf.h (elf_symbol): For v9, use 64-bit symbol type.
* as.h (valueT): Typedef moved here.
* struc-symbol.h (valueT): ...from here.
* write.c (write_object_file): Locals from_addr, to_addr,
table_addr are now addressT. Supply prototype for bfd_alloc for
now.
(fixup_segment): Local add_number is now valueT. Correct some
range-checking bugs.
(relax_align): Type `int' should be sufficient for the exponent.
(fix_new): Argument offset is type offsetT. Locals size and
newsize are type valueT.
* write.h (struct fix): Fields fx_offset and fx_addnumber are now
type valueT.
(fix_new): Fix prototype.
* symbols.c (symbol_new): Symbol value is type valueT.
(S_SET_VALUE, S_GET_VALUE): Likewise.
(S_IS_*): Specify int return type explicitly.
* symbols.h (symbol_new, S_GET_VALUE, S_SET_VALUE): Fixed
prototypes.
* read.c (s_comm): Values read are type valueT.
* expr.h (expressionS): Field X_add_number is an offsetT.
* tc.h (md_create_long_jump, md_create_short_jump,
md_section_align): Addresses are now type addressT.
(md_number_to_chars, md_apply_fix): Pass value as valueT.
* config/tc-i386.c (md_create_short_jump, md_create_long_jump,
md_number_to_chars, md_section_align): Adjusted.
* config/tc-sparc.c (sparc_ip): Initialize `len' variable to make
gcc shut up.
(md_create_short_jump, md_create_long_jump, md_number_to_chars,
md_section_align): Adjusted.
* config/tc-sparc.c (s_reserve): Permit use for other than a.out
format.
(s_common): Handle Solaris-2 version.
* config/ho-generic.h (free): Returns void if __STDC__.
* config/obj-elf.h (obj_elf_frob_symbol, elf_frob_file,
elf_file_symbol): Declare.
* expr.c (floating_constant, integer_constant): Now return void.
Thu Jul 1 12:13:43 1993 Ian Lance Taylor (ian@cygnus.com)
* configure.in: Match on sparc*-fujitsu-none rather than
sparclite*-fujitsu-none.
Wed Jun 30 11:12:02 1993 Ian Lance Taylor (ian@cygnus.com)
* read.c (cons): Conditionalize parsing of expression. Move
putting value into object file into separate function. Separate
out MRI and WANT_BITFIELDS cases into separate functions.
(emit_expr): New function to write data into object file.
Conditionalize on TC_CONS_FIX_NEW and TC_CONS_RELOC rather than on
processor types.
(parse_bitfield_cons): New function to parse bitfield expressions
as used by i960 assemblers. Only compiled if
BITFIELD_CONS_EXPRESSIONS is defined.
(parse_mri_cons): New function to parse MRI style strings. Only
compiled if MRI is defined.
(parse_repeat_cons): New function to parse repeat counts. Only
compiled if REPEAT_CONS_EXPRESSIONS is defined.
* read.h (emit_expr): Added declaration of new function.
* config/tc-a29k.h (TC_CONS_RELOC): Define to be RELOC_32.
* config/tc-h8300.h (TC_CONS_RELOC): Define to be R_RELWORD.
* config/tc-hppa.c (parse_cons_expression_hppa): New function to
parse a HPPA expression, rather than special case in cons
function.
(cons_fix_new_hppa): New function to emit an HPPA fixup, rather
than special case in emit_expr function.
* config/tc-hppa.h (TC_PARSE_CONS_EXPRESSION, TC_CONS_FIX_NEW):
Define to use new functions from tc-hppa.c.
* config/tc-i960.h (BITFIELD_CONS_EXPRESSIONS): Define.
(WANT_BITFIELDS): Removed; now obsolete.
* config/tc-mips.h (REPEAT_CONS_EXPRESSIONS): Define.
* config/tc-ns32k.c (cons_fix_new_ns32k): New function to emit an
NS32K fixup, rather than special case in emit_expr function.
* config/tc-ns32k.h (TC_CONS_FIX_NEW): Define to be
cons_fix_new_ns32k. Also use PARAMS rather than checking
__STDC__.
* config/tc-sparc.h (TC_CONS_RELOC): Define to RELOC_32.
* write.c (relax_and_size_seg, adjust_reloc_syms, write_contents):
Don't core dump if gas has no information about a section.
Wed Jun 30 06:21:27 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-sparc.c (md_begin): If sparcv9 is defined, reset
current_architecture to v9 automatically.
* config/tc-sparc.h (TARGET_FORMAT): Use elf64-sparc for v9.
* config/tc-sparc64.h, config/tc-sparc64.c: New files.
* configure.in: Use sparc64 cpu files for v9, and default to elf
format.
* write.c (relax_and_size_seg): Always fully process a section.
Section size is last frag's (vm)address plus its size. If no
relocations are present, force SEC_RELOC flag clear.
(dump_section_relocs): New debugging routine.
(adjust_reloc_syms): New routine, broken out from write_contents.
Don't adjust relocs that are already relative to section symbol.
Look for obj_fix_adjustable macro to know what else to skip,
instead of obj_write_symbol. Look for section symbol stored in
section information.
(write_object_file): Map adjust_reloc_syms over all sections.
(write_contents): Clear SEC_RELOC flag if no relocations are
found.
* as.h (__PTR_TO_INT, __INT_TO_PTR): New versions for Saber, to
keep it quiet.
* write.c (remove_subsegs): Don't define for BFD_ASSEMBLER.
Fri Jun 25 14:42:53 1993 K. Richard Pixley (rich@sendai.cygnus.com)
* Makefile.in (all, dvi, info, install-info, clean-info): do not
echo recursion lines.
(install-info, clean-info): collapse into the dvi and info rule.
Fri Jun 25 10:47:24 1993 Doug Evans (dje@canuck.cygnus.com)
* config/tc-sparc.c (sparc_ip): Remove support for %d/%q fp regs.
All fp regs are now specified as %f.
(priv_reg_table): fpq -> fq.
Fri Jun 25 03:43:06 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
* as.h (strstr): Disable declaration for now.
(fprint_value, sprint_value): Declare.
* subsegs.c (subseg_new_rest): Use memset to clear new frag.
(subseg_new) [BFD_ASSEMBLER]: Initialize all seginfo fields.
* expr.c (expr_part): Made sanity checks a.out-specific.
(expr): Disabled sanity checks.
* subsegs.h (segment_info_type) [BFD_ASSEMBLER]: Add field for
section symbol.
* subsegs.c (subseg_change): Initialize section symbol pointer
when setting up a new section.
* symbols.c (symbol_new) [BFD_ASSEMBLER]: Point BFD symbol's udata
field back at gas symbol structure.
* symbols.c (colon): Cast obstack_next_free value to char* before
doing arithmetic on it.
* subsegs.c (subseg_new_rest): Likewise.
* as.h (frag_now_fix): Likewise.
* config/obj-elf.c (elf_file_symbol): Use subseg_new instead of
calling bfd_make_section_old_way directly, and call subseg_set
instead of subseg_change. Now returns void.
(obj_elf_write_symbol): Only check local symbols for now.
(elf_stab_symbol): Now static and void, and disabled until it
works completely.
(obj_elf_size): For expression values, fail silently for now.
(obj_symbol_new_hook): Do nothing.
* config/tc-sparc.c (tc_gen_reloc): Handle BFD_RELOC_SPARC_WDISP22
relocation.
(s_local) [OBJ_ELF]: New function.
(md_pseudo_table) [OBJ_ELF]: Call it for "local".
(s_common): Rearrange to handle Solaris .common pseudo, which may
sometimes use bss space instead of common.
* config/obj-elf.h (TARGET_SYMBOL_FIELDS): Add new `local' field.
Thu Jun 24 16:33:53 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* configure.in: set host config to hpux for hppa*-hp-hpux
Thu Jun 24 13:35:06 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
* app.c (app_pop, app_push): Fix bug reported by Chris Arthur.
Tue Jun 22 01:04:23 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
* subsegs.c (subseg_new): Don't special-case a.out -R flag here.
* config/obj-aout.c (s_sect): Do it here.
* as.h (BAD_CASE): Don't make some lame compilers think we want
substitution inside strings.
* as.c (print_version_id): New function, split off from main.
(main): Call it.
* config/tc-sparc.c (md_parse_option) [OBJ_ELF]: Print version id
for -V. Ignore -Q and -s options for now.
Mon Jun 21 17:37:59 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* Makefile.in: make installation & builds work again for crosses
Sun Jun 20 18:18:26 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
* listing.c (list_symbol_table): Rewrite to print wide (>32 bits)
symbol values correctly.
* write.c (write_object_file): Deleted unused variables.
(fixup_segment): Use sprint_value.
* messages.c (sprint_value, fprint_value): New routines.
* config/obj-elf.c (elf_stab_symbol): Now returns void.
(obj_elf_stab_generic): Fix typo in logic.
* Makefile.in (INCLUDES): Look in ../bfd for bfd.h.
* as.h (addressT, offsetT): New types, using BFD types if
available.
(relax_addressT, struct frag): Use them.
* struc-symbol.h (valueT, struct broken_word): Likewise.
* as.h (subseg_new) [BFD_ASSEMBLER]: Name argument is const.
* subsegs.c (subseg_new) [BFD_ASSEMBLER]: Name argument is const.
Thu Jun 17 16:53:56 1993 david d `zoo' zuhn (zoo@cygnus.com)
* Makefile.in: canonicalize install.sh; for use within
this directory (and subdirs)
Sun Jun 20 02:34:04 1993 Ashley Saulsbury (ans@sics.se)
* m88k-opcode.h : fixed tiny tiny mistake - xcr was incorrectly
specified, should have both S1 and S2 fields identical
If only finding the problem was as fast as fixing the bug !!!!
Tue Jun 15 16:01:57 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* write.c (write_contents): Do write out non-loadable sections.
Debug sections can fall in this category.
* read.c (s_app_file): Call elf_file_symbol for ELF files.
* config/obj-elf.c (elf_file_symbol): New function.
* config/obj-elf.c (elf_stab_symbol_string): Renamed from pa_...,
added argument to specify section base name.
(obj_elf_stab_generic): Renamed from ..._stab. New argument
specifies section base name.
(obj_elf_stab): New function, calls obj_elf_stab_generic with
".stab" as section base name.
(obj_elf_xstab): New function, calls obj_elf_stab_generic.
(obj_elf_type): Handle "object". Use bitwise-or to merge in
symbol flags rather than simply replacing, so global/local flags
are preserved.
(obj_elf_ident): Rewrite.
Tue Jun 15 17:03:25 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* Makefile.in: remove parentdir support; use INSTALL_XFORM
Wed Jun 9 11:26:07 1993 Ian Lance Taylor (ian@cygnus.com)
* config/tc-i386.c (md_pseudo_table): .align uses a power of two
for any a.out target, not just Linux and 386BSD.
* config/tc-i386.h (DOT_LABEL_PREFIX): Do not define for any a.out
target.
Mon Jun 7 13:33:19 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-m88k.c: Don't include flonum.h, md.h, m88k.h. They
don't exist or duplicate other inclusions.
* config/tc-vax.h (NO_RELOC): Define.
Mon Jun 7 09:55:03 1993 Doug Evans (dje@canuck.cygnus.com)
* config/tc-sparc.c (sparc_ip): Fix parsing of asi number.
Fix error message.
Sat Jun 5 19:32:52 1993 Torbjorn Granlund (tege@nada.kth.se)
* gas/config/m88k-opcode.h (m88k_opcodes): Add 88110 instructions.
* gas/config/tc-m88k.c (get_reg): New arg reg_prefix. Compare first
char to reg_prefix instead of to 'r'.
(calcop): Change calls to get_reg.
(calcop): Handle new case 'x' to set reg_prefix.
(calcop): Set reg_prefix to 'r' after each call to get_reg.
(cmpslot): Add 88110 conditions.
* gas/config/m88k-opcode.h: Swap cases for "rot" for consistency.
* gas/config/tc-m88k.c (get_bf): Always restore input_line_pointer
before returning.
* gas/config/m88k-opcode.h (m88k_opcodes): Make equal mnemonics
adjacent; mov.s and mov.d swapped.
(m88k_opcodes): Fix typo `r2' -> `2'.
Fri Jun 4 15:59:31 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
* config/h8300.c: Support for H8/300-H opcodes.
* config/obj-coffbfd.c (w_strings): String table length is 4
bytes, no matter what the host int size is.
* configure.in (alpha-*-osf*): New.
Fri Jun 4 07:51:18 1993 Ian Lance Taylor (ian@cygnus.com)
* configure.in (mips-*-ecoffl*): New target; use ecoff and
mips-lit.
(mips-*-ecoff*): Added trailing '*'.
* config/obj-ecoff.c (ecoff_build_procs): Force the adr of the
first FDR in a file to be zero.
Thu Jun 3 14:09:59 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* Makefile.in (VERSION): Jump to 2.1.4.
* config/ho-hppabsd.h: New file, from Peter Hoogenboom.
* config/tc-mips.c (md_assemble): Call bfd_set_gp_size only for
ECOFF format.
Tue Jun 1 15:21:57 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-m68k.c (md_assemble): The 68040 cpu doesn't want a
separate '851 mmu.
* config/obj-elf.c, config/obj-elf.h: Update for new type, macro,
and routine names. Assuming 32 bits for now.
* config/obj-elf.c (elf_frob_file): Look for macro
elf_tc_final_processing_hook, instead of assuming a function
always exists.
* config/tc-hppa.c (elf_hppa_final_processing_hook): Renamed from
tc_final_processing_hook.
* config/tc-hppa.h (elf_tc_final_processing_hook): Use it.
* config/tc-hppa.h (elf_tc_symbol, elf_tc_make_sections): Macros
moved here from obj-elf.h.
* config/obj-elf.h: Don't include CPU-specific header files.
Sun May 30 16:49:37 1993 Peter Hoogenboom (hoogen@fast.cs.utah.edu)
* configure.in: configurations should match on 'hppa*' not 'hppa'.
* read.c: Add support for HPPA assembly language syntax (denoted
with '#ifdef TC_HPPA').
* symbols.c: Add support for HPPA assembly language syntax (denoted
with '#ifdef TC_HPPA').
* write.c (write_contents): Add support for HPPA-style
relocations.
* config/obj-elf.c: Stab symbols weren't written properly.
(obj_elf_version):
(obj_elf_desc):
(obj_elf_write_symbol):
(obj_elf_write_symbol_p):
(obj_elf_frob_symbol):
(elf_stab_symbol):
(elf_frob_file):
* config/tc-hppa.c: Support for HPPA symbol extension sections.
Remove some unused code. Support for HPPA assembly language
syntax.
* app.c:
* symbols.c:
* config/obj-elf.h:
(obj_write_symbol):
(obj_frob_file):
(elf_tc_symbol):
(elf_tc_make_sections):
* config/tc-hppa.h:
Sun May 30 21:44:45 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* config/obj-ecoff.c (obj_read_begin_hook, add_file): Assume
hash_new will have succeeded if it returns.
* config/tc-a29k.c (md_begin): Likewise.
* config/tc-i386.c (tc_aout_fix_to_chars): Now nbytes_r_length is
const.
(mode_from_disp_size, opcode_suffic_to_type): Now inline under
gcc.
(fits_in_{signed,unsigned}_{byte,word}): Likewise.
* expr.c: Delete register declarations; gcc ignores them anyways.
Fri May 28 19:03:32 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* hash.c (hash_new): Use xmalloc, since many callers don't check
for failure.
Thu May 27 13:02:15 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* frags.c (zero_address_frag, bss_address_frag): These are
external.
* tc.h (md_reloc_size): This is const.
* config/tc-{a29k,h8300,h8500,i386,i860,i960,m68k,ns32k,z8k}.c
(md_reloc_size): Now const.
* config/aout_gnu.h (enum machine_type, enum reloc_type): Delete
trailing commas.
* as.h (enum _segT): Ditto.
* struc-symbol.h (N_TYPE_seg): This should be const.
Thu May 27 11:43:59 1993 Michael Meissner (meissner@osf.org)
* config/obj-ecoff.c (add_file): Cast file_name to char * in
listing_source_file call.
* config/obj-elf.c (elf_stab_symbol_string): Cast first argument
of subseg_new call to eliminate const attribute.
(obj_elf_stab): Ditto.
(obj_symbol_new_hook): Cast first argument of bzero call to char *.
* read.c (s_align_bytes): Properly record alignment.
* expr.c (__): Undefine __ macro before use, since OSF/1 uses it
for the prototype/no prototype macro.
* as.c (got_sig): Don't do return ((SIGTY) 0), SIGTY might well be
void.
* as.h (relax_stateT enum): Delete trailing comma.
Thu May 27 11:07:50 1993 Ian Lance Taylor (ian@cygnus.com)
* app.c (do_scrub_begin): Let line_comment_chars override
comment_chars.
(do_scrub_next_char): If a line comment character is not at the
start of a line, treat it as a comment character if it is one.
For a CPP line comment use pseudo-op .appline rather than .line.
* input-scrub.c (logical_input_line): Make int rather than
unsigned.
(input_scrub_push, input_scrub_begin): Initialize
logical_input_line to -1 rather than 0.
(bump_line_counters): Increment logical_input_line.
(new_logical_line): If line_number is -2, decrement
logical_input_line.
(as_where): Use logical_input_line even if it is 0.
* read.h (s_app_file prototype): Now takes an int argument.
* read.c (potable): Make .appfile call s_app_file with 1. New
.appline pseudo-op calls s_app_line.
(s_app_file): If .appfile, call new_logical_line with -2 to
account for newline inserted by do_scrub_next_char. If listing,
call listing_source_file.
(s_app_line): New function to handle fake pseudo-op .appline.
* config/obj-coff.c (obj_pseudo_table): Make .appline call
obj_coff_ln.
(obj_coff_ln): Added argument to indicate whether .appline.
* config/obj-coffbfd.c (obj_pseudo_table): Make .appline call
obj_coff_ln.
(obj_coff_ln): Added argument to indicate whether .appline.
* config/tc-mips.c (s_file): Pass argument to s_app_file.
Tue May 25 11:59:07 1993 Ian Lance Taylor (ian@cygnus.com)
* config/obj-bout.h (S_GET_VALUE): Removed unnecessary cast.
Thu May 20 19:14:24 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-m68k.c (md_apply_fix_2): Straighten out check for
invalid values.
Wed May 19 07:33:17 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
* config/tc-h5000.c (build_bytes): Understand @rd mode and build
relocations correctly.
Mon May 17 15:06:26 1993 Ken Raeburn (raeburn@deneb.cygnus.com)
* Makefile.in (FLAGS_TO_PASS): Leave out TEXI2DVI for now, because
it's wrong.
* config/tc-m68k.c (md_apply_fix_2): Apply range checks and warn
if value is out of range.
Patch from Minh Tran-Le:
* config/tc-i386.c (i386_operand): For in/out port register used
as base reg, include InOutPortReg in operand type.
(MATCH): Accept overlap value of InOutPortReg.
Mon May 17 09:29:34 1993 Ian Lance Taylor (ian@cygnus.com)
* config/obj-ecoff.c (add_file, obj_ecoff_loc, obj_ecoff_stab):
Add calls to listing routines to produce combined source/assembler
listings.
(obj_ecoff_stab): Create a file pointer if none used yet.
(ecoff_frob_file): Set symcount to correct value.
Fri May 14 06:53:33 1993 Ken Raeburn (raeburn@deneb.cygnus.com)
* Makefile.in (VERSION): Bump to version 2.1, in preparation for
release.
* config/obj-aout.h (H_GET_HEADER_SIZE, H_SET_SYMBOL_TABLE_SIZE):
Define in terms of constants, not C structure sizes.
* config/tc-rs6000.c, config/tc-rs6000.h: Delete empty files.
Thu May 13 17:01:55 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/obj-aout.c (obj_header_append): Don't define if it's
defined as a macro.
* config/obj-hp300.h (obj_header_append): Define it as a macro.
* config/obj-hp300.c (hp300_header_append): New function.
* Makefile.in (distclean): Don't bother cleaning up doc files;
they aren't going to be in this directory.
Thu May 13 07:51:35 1993 Ian Lance Taylor (ian@cygnus.com)
* config/obj-ecoff.c (ecoff_build_symbols): Handle absolute
symbols.
* tc.h (TC_COFF_SIZEMACHDEP): Don't define here.
* config/tc-sh.h (TC_COFF_SIZEMACHDEP): Define here instead.
Mon May 10 06:01:12 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* config/obj-vms.c (VMS_Symbol_type_list): Don't bother with
initialization.
* configure.in (targets): Treat m68*-*-sysv* like m68k-*-coff.
Wed May 5 14:00:49 1993 Ian Lance Taylor (ian@cygnus.com)
* config/tc-mips.c (macro): Correct floating point double word
loads and stores for big endian target.
Wed May 5 08:39:21 1993 Ken Raeburn (raeburn@deneb.cygnus.com)
* config/tc-i386.c: Replace SEG_* with *_section, fix up subseg_*
calls. Deleted some unused code.
* config/obj-coff.c: Likewise.
ELF support, mostly contributed by Utah:
* config/obj-elf.c (obj_elf_section, obj_elf_stab, obj_elf_line,
obj_elf_type): Rewrite.
(obj_elf_frob_symbol, elf_stab_symbol_string, elf_stab_symbol,
obj_elf_desc, obj_elf_version, obj_symbol_new_hook, obj_elf_size):
New functions.
(obj_elf_ident): Dummy.
* config/obj-elf.h (FALSE, TRUE, S_*, tc_frob_symbol,
TARGET_SYMBOL_FIELDS): New macros.
(gdb_section): New variable decl.
* config/tc-i386.c (md_atof): Return zero, not empty string, on
success.
BFD_ASSEMBLER conditional changes:
* config/obj-coff.c (lineno_rootP, seg_N_TYPE, *_section_header):
Don't define these.
(SA_SET_SYM_ENDNDX, SA_SET_SYM_TAGNDX): New functions.
(fetch_coff_debug_section): Ditto.
(obj_coff_endef): Call fetch_coff_debug_section.
(struct line_no): New type.
(c_symbol_merge): New way for copying aux fields.
(c_dot_file_symbol): Put symbol in absolute section, and set flag
BSF_DEBUGGING.
(function_lineoff): New symbol.
(function_lineoff, text_lineno_number, our_lineno_number,
lineno_lastP): Don't define.
(c_line_new): Don't define.
(obj_emit_lineno, obj_coff_endef): Use abort calls as, uh,
placeholders, until
line-number recording gets implemented.
(obj_new_symbol_hook): New code for handling aux fields.
(add_lineno, add_linesym): New functions.
(obj_coff_ln): Call add_lineno, not c_line_new.
(obj_coff_endef): New code for handling symbol names. New lineno
code. Look for section name "*DEBUG*" for debugging section.
(align, coff_check_file_symbols, obj_coff_section,
coff_frob_file): New functions.
* config/obj-coff.h: Reordered some includes.
(BYTE_ORDERING, FILE_HEADER_MAGIC, seg_N_TYPE, N_TYPE_seg,
DEFAULT_MAGIC_NUMBER_FOR_OBJECT_FILE, AOUTHDR, AOUTHDRSIZE): Don't
define these.
(TARGET_SYMBOL_FIELDS, I960_SYM_FIELDS): New macros.
(SYM_AUXENT): New macro (for non-BFD_ASSEMBLER too) for accessing
aux entries. Most SA_* macros now use it unconditionally.
(S_*): Use `bsym' field, and access BFD private data.
(SF_*): Use `sy_flags' symbol field for most of these.
(H_*, object_headers, lineno, lineno_*P, OBJ_EMIT_LINENO): Don't
define.
(*_section_header): Don't define.
* config/tc-i386.c (md_convert_frag, md_apply_fix): Changed
interface.
(tc_gen_reloc) [I386COFF]: New function.
(tc_aout_fix_to_chars, tc_coff_fix2rtype): Don't define.
* config/tc-i386.h (TARGET_ARCH, TARGET_BYTES_BIG_ENDIAN): New
macros.
* config/obj-coff.c (stack_init): Don't do assignments inside
conditions.
(obj_coff_def): Simplified handling of symbol name a bit.
(tag_insert): Name argument is now pointer to CONST.
(obj_crawl_symbol_chain): Commented out.
* config/obj-coff.h: Use PARAMS macro in prototypes.
* write.c (relax_and_size_seg) [BFD_ASSEMBLER]: Don't indirect
through frchainP pointer if it is null.
* configure.in: Warn if BFD mode is explicitly turned off but is
required by specified target.
(mips ecoff targets): Don't need to set bfd_gas here; it gets
taken care of later.
* config/obj-coffbfd.c (crawl_symbols): Don't clear sy_forward
field.
(yank_symbols): Merge symbols only if sy_forward is null.
* config/tc-m68k.h (AOUT_MACHTYPE): Don't define if already
defined.
* tc.h (md_convert_frag) [BFD_ASSEMBLER]: Section arg is not
pointer.
* config/tc-m68k.c (md_convert_frag) [BFD_ASSEMBLER]: Ditto.
* config/tc-sparc.h (LOCAL_LABEL) [OBJ_ELF]: Anything starting
with "." is a local label.
* config/te-hppa.h, config/tc-hppa.h, config/tc-hppa.c: New config
files.
* config/te-linux.h, config/te-386bsd.h: New config files.
* configure.in (i386-*-linux, i386-*-bsd): Use them.
* config/tc-i386.h (TARGET_FORMAT): Select format based on target
environment.
(DOT_LABEL_PREFIX): Don't define for 386bsd or Linux.
Wed May 5 13:14:01 1993 Ian Lance Taylor (ian@cygnus.com)
* config/obj-ecoff.c (init_file): Set fMerge to 0 since dbx seems
to want it that way.
(ecoff_build_symbols): Turn local st_Proc symbols into
st_StaticProc symbols. Set index field of external st_Proc and
st_staticProc symbols correctly.
* config/tc-mips.h (NO_LISTING): Don't define. People might want
listings.
Tue May 4 21:22:54 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/obj-hp300.h, config/obj-hp300.c, config/te-hp300.h: New
files.
* configure.in (m68k-*-hpux): Use them.
* config/obj-aout.c (obj_pre_write_hook): Use AOUT_VERSION if
defined, otherwise zero.
* config/aout_gnu.h (OMAGIC): Don't define if already defined.
Mon May 3 15:59:32 1993 Steve Chamberlain (sac@thepub.cygnus.com)
* config/tc-sparc.c (sparc_ip): Allow any abs expression as an
address space number.
Wed Apr 28 19:11:22 1993 Ken Raeburn (raeburn@deneb.cygnus.com)
* config/obj-aout.h (TARGET_DEFAULT): Don't default this at all.
* config/tc-a29k.c: Include ctype.h.
(define_some_regs): Added special-purpose registers for 29050.
* config/tc-i386.c (comment_chars) [TE_I386AIX]: Include "/".
* config/obj-coffbfd.c (fill_section): Don't set STYP_REG here.
(change_to_section): Set it here instead.
Wed Apr 28 13:40:29 1993 Ian Lance Taylor (ian@rtl.cygnus.com)
* config/obj-ecoff.c (obj_symbol_new_hook): Make up a .file if one
hasn't been seen yet.
(add_ecoff_symbol): Don't refer to cur_file_ptr if it is NULL.
Mon Apr 26 18:29:05 1993 Steve Chamberlain (sac@thepub.cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-sh.c, config/tc-sh.h: New files supporting Hitachi
19990502 sourceware import
1999-05-03 09:29:11 +02:00
SH.
Mon Apr 26 12:28:27 1993 Ian Lance Taylor (ian@cygnus.com)
* expr.c (operand): Fix unary plus operator (previously was the
same as '~' operator!).
Wed Apr 21 00:20:11 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* write.c (cvt_frag_to_fill): Define even if BFD is defined.
(write_object_file): Do define if BFD_ASSEMBLER. Invoke
obj_check_file_symbols if defined. Call verify_symbol_chain_2
instead of open-coding it. Fix some bugs in patching up symbol
chain.
(relax_segment): Make some code we "ought to be able to" use for
all targets no longer conditionalized on ns32k target; instead, do
it always, and if the appropriate conditions fail, abort.
* symbols.c (DEBUG): Enabled.
(symbol_new): Make sure bfd_make_empty_symbol works.
(verify_symbol_chain_2): New function; takes one symbol as
argument, anywhere in the chain.
(dollar_label*): Use default initializers.
* as.c (perform_an_assembly_pass): Call md_begin here...
(main): ...and not here.
* config/tc-m68k.h (TARGET_FORMAT): Use a.out-sunos-big for a.out.
(tc_frob_symbol): New macro: Get rid of symbols in reg_section.
* config/tc-m68k.c (omagic): Don't define for BFD_ASSEMBLER.
(add_fix, add_frag): Now functions instead of macros.
(m68k_reg_parse, m68k_ip, md_estimate_size_before_relax, get_num,
s_data1, s_data2, s_bss): Use new *_section names, for
compatibility with BFD_ASSEMBLER mode; rewrite switch statements
to handle non-integral segT.
(tc_coff_fix2rtype, tc_aout_fix_to_chars,
tc_coff_symbol_emit_hook): Don't define for BFD_ASSEMBLER.
(tc_gen_reloc): New routine for BFD_ASSEMBLER.
(md_apply_fix, md_apply_fix_2): Renamed old md_apply_fix to
md_apply_fix_2; new md_apply_fix definition varies interface
depending on BFD_ASSEMBLER.
(md_convert_frag, md_convert_frag_1): Likewise. Use new *_section
names.
* config/obj-vms.c: Include config.h.
(version_string): Delete declaration.
(Write_VMS_MHD_Records): Use GAS_VERSION instead.
(vms_resolve_symbol_redef): New function, taken from VMS code in
symbols.c.
(_doprnt): Deleted.
(VMS_Store_Struct, VMS_Def_Struct, VMS_Set_Struct,
VMS_TBT_Block_End, get_VMS_time_on_unix, generate_suffix,
VMS_Psect_Spec): Fixed to compile under traditional C.
* config/obj-vms.h: Use PARAMS macro.
(vms_resolve_symbol_redef): Declare.
(RESOLVE_SYMBOL_REDEFINITION): New macro.
* symbols.c (colon): Remove some VMS-specific code, look for
RESOLVE_SYMBOL_REDEFINITION macro instead.
* config/tc-m68k.c (m68k_ip): Don't try expanding DBcc
instructions.
* config/tc-i386.c: Reordered some functions so inlining might
work. Use PARAMS in function declarations.
(reloc): New routine.
(md_assemble): Rearrange switch statements to work with
non-integral segT.
* struc-symbol.h [BFD_ASSEMBLER]: Undefine
SYMBOLS_NEED_BACKPOINTERS before defining it.
* subsegs.c (subseg_new_rest): Now static.
* read.c (pseudo_set): Better error message for difference of
symbols in different frags.
* Makefile.in (check): Pass down some new variables, indicating
pathname or program name for cc, nm, objdump.
* as.h (OUTPUT_FLAVOR): New macro.
* config/tc-sparc.c (tc_gen_reloc): Use OUTPUT_FLAVOR.
* configure.in: Initialize bfd_gas properly. Warn that ELF
support is incomplete.
Thu Apr 15 22:39:05 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* read.c (float_cons): Accept null pointer return from md_atof.
* config/tc-m68k.c (md_atof): Return null for success.
* config/tc-sparc.c (md_atof): Ditto.
Thu Apr 15 16:04:39 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* doc/as.texinfo: formatting and comment cleanups; show SPARC
alternative options in same style as other machines; simplify some
conditional use; include GPL as separate file (from texinfo dir)
* doc/Makefile.in: (as.info) include directory containing GPL in
makeinfo search path
* doc/h8.texi: new file; conditional settings for GAS manual
on Hitachi chips
Tue Apr 13 15:31:40 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* doc/as.texinfo: mention SPARC architecture options.
Fri Apr 9 17:43:11 1993 Ken Raeburn (raeburn@cygnus.com)
* configure.in: Rearranged whitespace in per-host/per-target
sections. Added hooks for dropping in HPPA support (not included
yet). Separate out overrides of variables based on target format
and bfd-gas selection from actual target-specific commands. Add
error message for recognized but unsupported format name.
Fri Apr 9 09:05:47 1993 Ian Lance Taylor (ian@cygnus.com)
* config/obj-ecoff.h (ecoff_build_lineno): Make ilineMax in
symbolic header match cline in FDR; the native linker seems to
want that.
Thu Apr 8 15:51:28 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* doc/Makefile.in: as.texinfo is in $(srcdir). Use
$(srcdir)/as.texinfo explicitly in several places
Thu Apr 8 15:15:02 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* doc/Makefile.in: update dvi, clean targets for new source
file structure
Thu Apr 8 12:52:46 1993 Ian Lance Taylor (ian@cygnus.com)
* config/ho-decstatn.h: Define BROKEN_ASSERT if not __GNUC__,
rather than undefining know.
* configure.in: Match ultrix*, not just ultrix.
Wed Apr 7 20:18:10 1993 Roland H. Pesch (pesch@fowanton.cygnus.com)
* doc/as.texinfo: converted conditional markup to use new
Texinfo facilities, avoiding m4.
* doc/as-all.texinfo, all.m4, pretex.m4: deleted.
* doc/Makefile.in: recast doc configuration to use a link to an
included texinfo file.
* doc/all.texi: settings for generic form of documentation.
Tue Apr 6 11:56:21 1993 Ian Lance Taylor (ian@cygnus.com)
* read.c (cons): Zero out frag when creating reloc.
Mon Apr 5 09:41:58 1993 Ian Lance Taylor (ian@cygnus.com)
* config/tc-mips.c (gp_reference): Certain magic symbols can never
be referenced off the GP register.
* app.c (do_scrub_next_char): Handle states 9 and 10 correctly
when dealing with characters of type LEX_IS_TWOCHAR_COMMENT_1ST,
LEX_IS_STRINGQUOTE, and LEX_IS_ONECHAR_QUOTE.
* config/te-irix.h: New file; irix needs a different LOCAL_LABEL
definition from other MIPS targets.
* configure.in (mips-*-irix): Use emulation irix.
Sun Apr 4 15:21:09 1993 Steve Chamberlain (sac@thepub.cygnus.com)
* config/tc-h8500.c: Get relax size of branch instructions right,
(get_operand): Parse @sp+ correctly.
Fri Apr 2 15:59:49 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* subsegs.h (segment_info_type) [BFD_ASSEMBLER]: Don't include
COFF section header field.
* configure.in: Print error message if host or target is not
supported.
* configure.in: If with-bfd-assembler, use obj-coff instead of
obj-coffbfd.
* config/ho-generic.h: Include string.h.
Fri Apr 2 08:54:57 1993 Ian Lance Taylor (ian@cygnus.com)
* config/tc-mips.h (LOCAL_LABEL): Treat any label starting with
'$' as local, for any object file format.
* config/tc-mips.c (macro): Optimizations to branching code and a
couple of bug fixes from ralphc@pyrps5.eng.pyramid.com (Ralph
Campbell).
* config/ho-irix.h: New file; if not gcc, define BROKEN_ASSERT.
* configure.in (mips-sgi-irix*): Set gas_host to irix.
Wed Mar 31 17:53:54 1993 Ian Lance Taylor (ian@cygnus.com)
* subsegs.c (subseg_new): Set output_section of new section.
* as.c (perform_an_assemly_pass): Don't set output_section here.
* expr.c (expr_part, expr): Turn off section assertions for ECOFF,
since it has additional sections.
* read.c (s_lcomm): For MIPS ECOFF, put small objects in .sbss,
not bss_section.
* config/obj-ecoff.h (TARGET_SYMBOL_FIELDS): Added
ecoff_undefined field.
* config/obj-ecoff.c (obj_symbol_new_hook): Initialize
ecoff_undefined field.
(add_file): If using stabs, just output a stabs symbol rather than
creating a new fdr.
(obj_ecoff_begin, obj_ecoff_bend): Ignore line number by reading
it with get_absolute_expression, rather than skipping it by hand.
(obj_ecoff_loc): If using stabs, just output a stabs symbol rather
than ECOFF line number information.
(obj_ecoff_stab): Accept non-zero values for stabs line number.
(ecoff_build_symbols): Set ifilesym correctly. Set storage class
to small, undefined and/or readonly sections if appropriate.
Don't output symbol names containing \001 characters.
(ecoff_frob_file): Make sure at least one fdr is output.
* config/tc-mips.h: Define TC_MIPS.
* config/tc-mips.c (g_switch_value): New static variable.
(md_assemble): Set gp size of output BFD.
(gp_reference): New function; returns 1 if expression can be
accesssed via gp. Always returns 0 if not using ECOFF.
(macro_build): Convert BFD_RELOC_LO16 to BFD_RELOC_MIPS_GPREL if
possible.
(macro): Generate sequences using gp if possible.
(md_parse_option): Ignore -EL and -EB. Parse -G.
(md_apply_fix): Added BFD_RELOC_MIPS_GPREL to ignored case.
(s_change_sec): Handle .rdata and .sdata for ECOFF.
(s_extern): Mark symbol as external. Set ecoff_undefined field.
Tue Mar 30 10:11:41 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* output-file.c (output_file_create): Don't call as_perror for
filename rejected by application.
* as.c (main) [BFD_ASSEMBLER]: If errors occur, close and unlink
the output file.
* doc/as.texinfo: Don't use @value in node names for the moment;
references don't appear to work right.
* as.h (const, volatile): Put these definitions back, and use
them.
* doc/as.texinfo: First pass at using new texinfo features --
variables, conditional tests. Far from complete.
Mon Mar 29 16:05:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* read.c: Temporary hack to handle some 64-bit constants. This
should be redone later.
(target_big_endian): Declare.
(big_cons): If it's set, reverse order of bytes being copied.
* config/tc-sparc.c (md_begin): Set target_big_endian.
* read.c (s_ignore): Delete declaration of is_end_of_line.
* config/obj-coffbfd.c (yank_symbols): Build list of file symbol
forward pointers properly.
Mon Mar 29 13:47:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
* config/obj-coffbfd.c (do_relocs_for): Fix bug where nrelocs
wasn't being stored into scnhdr.
* config/obj-coffbfd.h: Add prototype of s_get_segment.
* read.c (TC_START_LABEL): Default definition.
(read_a_source_file): Use TC_START_LABEL macro to work out
if a label has been seen.
Mon Mar 29 12:56:56 1993 Ian Lance Taylor (ian@cygnus.com)
* configure.in: Set BFDDEF and BFDLIB at the top of Makefile, not
the bottom (make expands variables in dependencies when the
dependencies are read, not when they are used).
* config/obj-coffbfd.c (fill_section): Don't set NOLOAD bit for
a29k .bss section; the mondfe program doesn't like it.
Sun Mar 28 08:12:53 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* config/tc-m68k.c: Use PARAMS macro, and use CONST instead of
const.
(current_architecture): Don't need initializer.
Fri Mar 26 08:12:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* doc/none.m4: Define Z8000.
* doc/Makefile.in (as-*.texinfo): Refer to $(srcdir). Remove the
texinfo file before recreating it.
(TEXI2DVI): Need to set TEXINPUTS if "make as.dvi" is to work in
this directory.
(srcdir): Delete second, bogus definition.
(as.info): Look for as-*.texinfo in current directory rather than
in $(srcdir).
(as.dvi): Ditto.
(dvi): New rule.
* doc/configure.in: Create links to all as-*.texinfo files in the
source directory, if that's not the current directory.
* configure.in (per-host): Accept MIPS host with BSD version
number.
(per-target): Classify i486 as i386. Use generic cpu_type instead
of target_cpu in selecting format etc.
* app.c (do_scrub_next_char): Use .appfile, not .app-file.
* read.c (potable): Change .app-file to .appfile.
* config/ho-decstatn.h: Renamed from ho-decstation.h.
* configure.in: Adjusted.
* config/obj-bfd-sunos.*: Unused; deleted.
* Makefile.in (version.c, vers-stamp): Deleted.
(config.h): Define GAS_VERSION.
* as.c (version_string): Deleted declaration.
(main): Look for GAS_VERSION instead.
* doc/as.texinfo: Updated description of -a* (listing) options,
and describe how to pass them through from gcc.
* config/obj-coffbfd.c (do_relocs_for): Don't allocate storage or
process relocs if there aren't any relocs to process. Avoids
malloc/free bug on SCO too.
* as.h: Move local include files below system include files, to
avoid some redefinition complaints on some systems.
(const, volatile): Don't need these conditionally defined if we
use CONST and VOLATILE from ansidecl.h.
(seg_name): Use CONST, not const.
Fri Mar 26 10:22:04 1993 Ian Lance Taylor (ian@cygnus.com)
* config/tc-mips.c: Reindented to GNU standards.
Thu Mar 25 08:59:14 1993 Ian Lance Taylor (ian@cygnus.com)
* config/obj-coffbfd.c (do_relocs_for): Remove a29k special case.
(fixup_segment): Add a29k special case; the linker is not prepared
to see a segment offset here.
* app.c (do_scrub_next_char): Added new state, 10, modifying state
9 to only keep a space in between identifier characters.
Wed Mar 24 02:16:22 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
* Makefile.in: add dvi target; as-$(config).texinfo might live in
srcdir, might be in objdir.
* doc/Makefile.in: dvi depends on as.dvi
Mon Mar 22 23:59:13 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* Makefile.in: add installcheck target
Mon Mar 22 16:25:57 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
* config/tc-sparc.c (sparc_ip): Add support for membar mask names.
Add missing colons in prefetch error messages. Add support for
ASI names.
Mon Mar 22 10:19:00 1993 Ian Lance Taylor (ian@cygnus.com)
* config/tc-mips.c (macro): Use $AT for any floating point load.
Sat Mar 20 12:50:51 1993 Ken Raeburn (raeburn@urth.cygnus.com)
* config/tc-m68k.c (m68k_ip): For operand type 'M', reject
bignums, but don't emit error message.
Fri Mar 19 21:02:19 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
* Makefile.in (targ-cpu.o): Depend on config.h.
Wed Mar 17 16:44:06 1993 Ian Lance Taylor (ian@cygnus.com)
* app.c (do_scrub_next_char): Added new state, 9, to avoid
dropping a space immediately following an identifier.
* expr.c, write.c: Rewrote assert expressions to not use multiple
lines; I don't think that can be done portably.
* config/tc-mips.c (macro): Use $AT if target register is zero in
load instruction, which it can be for a floating point load.
Mon Mar 15 12:17:28 1993 Ian Lance Taylor (ian@cygnus.com)
* write.c (write_contents): Compute the relocs before writing out
the section contents.
* config/obj-ecoff.h, config/obj-ecoff.c: Numerous changes to get
symbol table and values right.
* config/tc-mips.h (LOCAL_LABEL): If OBJ_ECOFF, any label starting
with $L is local.
* config/tc-mips.c (tc_gen_reloc): If OBJ_ECOFF, adjust the addend
by the section vma.
* config/z8k.mt (TARG_CPU_DEPENDENTS): The relevant file is
z8k-opc.h, not z8k.h.
* config/obj-coffbfd.c (obj_coff_endef): Correct test for .bf
symbol.
Fri Mar 12 18:33:36 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* configure.in: recognize sparc-sun-solaris2* instead of -solaris2
Fri Mar 12 12:00:07 1993 Ian Lance Taylor (ian@cygnus.com)
* expr.c, write.c: Ultrix native 4.2 cc requires assert condition
to be on a single line.
Thu Mar 11 17:56:22 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* Makefile.in (config.h): Create file, writing out definitions of
target cpu, alias, and canonical name.
(ALL_CFLAGS): No longer define TARGET_CPU.
* Makefile.in (check): Print a message, instead of quitting
silently.
* as.c (main): Don't catch any signals, for now.
* version.c: Deleted.
* Makefile.in: Generate it, putting in only the version number
itself.
(VERSION): New variable.
* as.c: Include config.h.
(main): Reformatted version string. Include target alias. Don't
print if not requested (i.e., unknown -v argument).
* as.c (stralloc): Deleted.
(main): Call strdup instead.
* configure.in: Handle all 68300 series chips.
* config/tc-m68k.c: Include config.h.
(md_assemble): Assume TARGET_CPU is defined. Accept some 68300
series cpus as defaults.
(md_parse_option): Accept some m68300 series CPUs as defaults.
Wed Mar 10 17:41:16 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* as.c (EXIT_SUCCESS, EXIT_FAILURE): Define to normal values if
not already defined.
(main, got_sig): Use them.
* config/ho-vms.h (EXIT_SUCCESS, EXIT_FAILURE): Reverse default
values.
Tue Mar 9 07:40:06 1993 Ian Lance Taylor (ian@cygnus.com)
* config/obj-ecoff.c, config/obj-ecoff.h: Preliminary ECOFF
support.
* config/tc-mips.h (TARGET_FORMAT): Define based on OBJ_AOUT vs.
OBJ_ECOFF as well as TARGET_BYTES_*_ENDIAN.
(struct loc, struct proc, struct file): Moved to tc-mips.c within
#ifndef OBJ_ECOFF block, since ECOFF uses different versions.
* config/tc-mips.c: Rearranged for ECOFF support. Added
prototypes for all static functions. Moved existing minimal
debugging format support info #ifndef OBJ_ECOFF blocks.
(macro_build_lui): Eliminated sign_extend argument, because ECOFF
does not support a non sign extended high 16 bits reloc. Adjusted
all callers accordingly.
(tc_get_register): Renamed from get_register, and made non-static.
* config/mips-big.mt, config/mips-lit.mt: New files. Define
TARGET_BYTES_BIG_ENDIAN and TARGET_BYTES_LITTLE_ENDIAN,
respectively.
* configure.in (mips-*-bsd*): Use gas_target mips-lit.
(mips-*-ultrix*, mips-*-irix*, mips-*-ecoff): New targets, using
obj_format ecoff and gas_target mips-lit or mips-big.
Tue Mar 9 07:43:01 1993 Ken Raeburn (raeburn@cygnus.com)
* version.c: Bump to version 2.0.1.
Tue Mar 9 07:40:06 1993 Ian Lance Taylor (ian@cygnus.com)
* write.c (chain_frchains_together): Check that seg_info (section)
is not NULL.
(write_object_file): Call obj_frob_file after setting the symbols,
not before.
Tue Mar 9 00:00:00 1993 Ken Raeburn (raeburn@cygnus.com)
* Version 2.0 released.
Mon Mar 8 14:57:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-i386.h (TC_COUNT_RELOC): Look for fx_addsy only.
Fri Mar 5 09:05:55 1993 Ian Lance Taylor (ian@cygnus.com)
* read.h: Define stringer here.
Fix typos
2001-03-09 00:06:04 +01:00
* read.c, config/obj-ieee.c, config/obj-tcm88k.c: Not any of these
19990502 sourceware import
1999-05-03 09:29:11 +02:00
places.
Thu Mar 4 11:52:23 1993 Steve Chamberlain (sac@thepub.cygnus.com)
* read.c (s_space): Multiply repeat count by mult, not fill.
Thu Mar 4 05:20:42 1993 Ken Raeburn (raeburn@cygnus.com)
* read.c: Include ctype.h.
Wed Mar 3 10:41:46 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
Patches from Eric Youngdale:
* make-gas.com: Find obstack.obj if it's not in the current
directory.
* read.c (s_ignore): Don't declare is_end_of_line. It's
redundant, and triggers a VMS gcc compiler bug.
* write.c (write_object_file): Macro SUB_SEGMENT_ALIGN now takes
current segment as an argument. (Ignored in all cases but VMS.)
All callers and definitions changed.
Tue Mar 2 11:56:19 1993 Ian Lance Taylor (ian@cygnus.com)
* listing.c: Cleaned up a bit, added prototypes, made NO_LISTING
case compile again.
Tue Mar 2 08:53:34 1993 Ken Raeburn (raeburn@cygnus.com)
* config/tc-m68k.c (isbyte): Accept all values from -255 to +255,
so "~0x80" won't be rejected.
* config/obj-elf.c: No longer include elf/reloc.h.
(obj_elf_section): Set SEC_READONLY and SEC_CODE for text section.
(obj_elf_stab, obj_elf_desc): Deleted do-nothing and commented-out
routines.
(obj_elf_xstab): New routine.
(obj_elf_set_size): Call as_warn, not fprintf. Pass desired
argument to s_ignore. Put "#if 0" around unused code.
(obj_pseudo_table): Use s_ignore instead of do-nothing routines.
Call elf_xstabs for .stabs and .xstabs operators.
* config/tc-sparc.h (TARGET_FORMAT) [OBJ_ELF]: Now "elf32-sparc".
* write.c (relax_and_size_seg): Set SEC_RELOC only if fixups are
present.
* configure.in: mips-bsd configuration was missing format spec.
Should use aout.
* Makefile.in (Makefile): Depends on configure.in.
* config/tc-mips.c (append_insn): Don't check for alignment of
frag in memory; alignment of instructions in section is a separate
matter.
* config/tc-mips.c (macro_build_lui): Fix some assumptions of ANSI
C availability.
* listing.h: Always provide function declarations, not macros, so
pcc won't lose.
Tue Mar 2 00:50:43 1993 John Gilmore (gnu@cygnus.com)
* CONTRIBUTORS: Update Gilmore entry.
Mon Mar 1 12:03:16 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
* config/tc-sparc.c (sparc_ip): Correctly assemble prefetch
instructions. Accept integer prefetch function numbers.
Wed Feb 24 14:58:19 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-sparc.c (s_xword): Now call big_cons, so large
constants are accepted, but symbolic values are not. GCC will not
generate the latter currently.
* frags.c (frag_init): New function.
(zero_address_frag, bss_address_frag): Now initialized at run
time.
* as.c (main): Call frag_init.
Wed Feb 24 10:32:42 1993 Ian Lance Taylor (ian@cygnus.com)
* app.c (do_scrub_next_char): In LEX_IS_LINE_COMMENT_START case:
Don't unget ch2 if we didn't get it.
Wed Feb 24 04:14:07 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* doc/Makefile.in (TEXIDIR): Updated for new layout.
* config/tc-sparc.c (s_common): Add support for ELF version.
(tc_gen_reloc) [BFD_ASSEMBLER]: New function.
* config/tc-sparc.h (TARGET_ARCH, TARGET_FORMAT) [BFD_ASSEMBLER]:
New macros.
(md_convert_frag): New macro.
* config/tc-m68k.c (m68k_ip): For PC-relative addressing of a
symbol, fix the offset so "+2" isn't required.
* config/tc-i960.c (line_comment_chars, line_separator_chars):
Define as common/bss.
(op_hash, reg_hash, areg_hash, iclasses_seen, br_cnt): Default C
initializers are sufficient.
* config/obj-aout.h [BFD_ASSEMBLER]: Include libaout.h from bfd.
(TARGET_FORMAT) [BFD_ASSEMBLER]: Default to "a.out".
(S_SET_*, S_GET_*, obj_frob_symbol) [BFD_ASSEMBLER]: New macros.
(S_SET_TYPE) [!BFD_ASSEMBLER]: New macro.
* config/obj-aout.c: Use PARAMS macro for declarations. Remove
"IGNORE_DEBUG" conditional, since both branches are identical.
Use S_SET_TYPE, S_GET_TYPE, and S_GET_DESC instead of directly
referencing symbol structure members.
(obj_aout_frob_symbol) [BFD_ASSEMBLER]: New function.
* as.h (struct frag): Reordered a couple of fields for better
packing.
* write.c (record_alignment) [BFD_ASSEMBLER]: Record it in the
section info.
(write_contents) [BFD_ASSEMBLER]: New function.
(write_object_file) [BFD_ASSEMBLER]: Always handle -R here. Call
fix_new with BFD_RELOC_NONE instead of 0 or NO_RELOC. Call
obj_frob_file, obj_frob_symbol, tc_frob_symbol if defined.
(fixup_segment): Make sure common-section symbols get treated the
same as undefined symbols.
(fix_new) [BFD_ASSEMBLER]: Argument r_type is of type
bfd_reloc_code_real_type. Use seg_fix_{root,tail}P derived from
section info.
* write.h (fix_new): Update prototype.
* tc.h (md_operand, md_convert_frag, tc_headers_hook,
md_section_align, md_undefined_symbol): Don't provide prototypes
if these are defined as macros.
(md_convert_frag) [BFD_ASSEMBLER]: BFD version needs bfd and
section passed.
* symbols.c (symbol_new): Argument NAME is now pointer to const.
Simplified STRIP_UNDERSCORE code. Remove assumptions about null
pointers in freshly allocated storage. [BFD_ASSEMBLER]: Get new
BFD symbol.
(colon): Display other/desc fields of redefined symbol only if
S_GET_OTHER and S_GET_DESC are defined.
(symbol_make): Argument NAME is now pointer to const.
(symbol_find, symbol_find_base): Likewise.
(S_IS_*, S_GET_*, S_SET_*) [BFD_ASSEMBLER]: New functions.
* symbols.h: Fix prototypes for new const arguments. Add
prototypes for BFD_ASSEMBLER S_* functions.
* subsegs.c (subseg_change) [BFD_ASSEMBLER]: BFD version of code
for changing to an existing section.
(subseg_new_rest) [BFD_ASSEMBLER]: Split off from subseg_new,
called by subseg_new and subseg_set.
(subseg_new) [BFD_ASSEMBLER]: Rewritten to change to new section,
given section name and subseg number.
(subseg_set) [BFD_ASSEMBLER]: New function; change to a possibly
new section/subsection.
* read.c: Don't include ctype.h.
(cons) [BFD_ASSEMBLER]: For undefined symbols, use BFD_RELOC_32
for now; should be machine-dependent.
* configure.in: Accept *-*-elf and *-*-solaris* as ELF format
targets, forcing BFD use.
Wed Feb 17 18:59:03 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-sparc.c: Use PARAMS macro for static function
declarations. Use BFD_RELOC_ macros everywhere, with
compatibility macros declared for non-BFD mode.
(struct sparc_it) [BFD_ASSEMBLER]: Use bfd_reloc_code_real_type
instead of enum reloc_type.
(emit_sparc_reloc): Commented-out function deleted.
(md_convert_frag): Deleted.
(tc_aout_pre_write_hook): Don't define for BFD_ASSEMBLER.
(md_apply_fix): Changed calling sequence (conditionally) for BFD
version.
* config/tc-sparc.h (md_convert_frag): New macro.
* config/obj-aout.c (obj_aout_stab): Refer to undefined_section,
not SEG_UNKNOWN. Use S_SET_TYPE, S_GET_TYPE, S_GET_DESC instead
of referencing fields directly.
* write.c (cvt_frag_to_fill): New function; extracted from
write_object_file.
(write_object_file) [! BFD_ASSEMBLER]: Call it.
(relax_and_size_seg) [BFD_ASSEMBLER]: New function; relax section
and set its size and flags.
* struc-symbol.h (struct symbol) [BFD_ASSEMBLER]: Replace some
fields with BFD equivalents. Turn on back-pointers, and add
target-specific fields at end.
Thu Feb 11 09:20:37 1993 Ian Lance Taylor (ian@cygnus.com)
* config/obj-coffbfd.c (fill_section): Don't set vaddr here.
(write_object_file): Set it here instead, so that fixup_segment
can see the correct value.
Mon Feb 8 13:56:17 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* write.c (write_object_file): Check for errors and warnings and
bail out before processing contents.
(chain_frchains_together_1): New function, does most of the work
of remove_subsegs.
(chain_frchains_together) [BFD_ASSEMBLER]: New function.
(remove_subsegs) [! BFD]: Call it.
(write_object_file) [BFD_ASSEMBLER]: Converted to use BFD
structures and routines.
* config/obj-elf.*: New files.
* config/mips.mt, config/rs6000.mt: Deleted.
* config/h8300.mt: Don't specify compiler here.
* config/z8k.mt: The z8k code depends on the z8k opcode table,
not the h8300 one.
* config/tc-z8k.h: Comment fix.
* write.c: Reordered some functions for better inlining.
(fixup_segment): Linkrelax code is no longer conditional on
TC_I960.
Thu Feb 4 12:45:16 1993 Steve Chamberlain (sac@thepub.cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/{h8500.mt, config/tc-h8500.c, config/tc-h8500.h,
config/obj-coffbfd.c, obj-coffbfd.h}: support for the H8/500.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Wed Feb 3 19:28:18 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/obj-vms.h (SUB_SEGMENT_ALIGN): Define VMS version here.
* write.c (write_object_file): Not here.
(fix_new): Initialize fx_addnumber.
* listing.c: Don't include target-cpu.h explicitly, since as.h
includes it.
Thu Jan 28 00:35:40 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* write.h [BFD_ASSEMBLER]: Don't declare next_object_file_charP,
*_fix_root, *_fix_tail, seg_fix_rootP, seg_fix_tailP.
(struct fix): Reordered fields for compactness and efficiency.
Converted some logical fields to 1-bit fields.
* config/obj-aout.h: Use PARAMS.
[BFD_ASSEMBLER]: Don't define/declare AOUT_MACHTYPE, seg_N_TYPE,
N_TYPE_seg, DEFAULT_MAGIC_NUMBER_FOR_OBJECT_FILE.
* read.c: Don't include listing.h; as.h includes it. Removed
DONTDEF code.
[BFD_ASSEMBLER]: Include subsegs.h.
(old_buffer, new_broken_words): Default initialization is
sufficient.
* output-file.c [BFD_ASSEMBLER]: Include bfd.h, default TARGET_MACH
to 0, define stdoutput.
(output_file_create) [BFD_ASSEMBLER]: Call bfd_perror on failure.
Call bfd_set_arch_mach.
(output_file_close) [BFD_ASSEMBLER]: Call bfd_close, not
bfd_close_all_done. Call bfd_perror on failure.
(output_file_append) [BFD_ASSEMBLER]: Don't define.
* config/m68kcoff.mt (LOCAL_LOADLIBES): Delete definition.
* subsegs.h (segment_info_type): Always define. Omit field scnhdr
if not MANY_SEGMENTS. Define new field bfd_section if
BFD_ASSEMBLER.
(seg_info): New macro.
* expr.c, input-scrub.c: Use PARAMS macro. Deleted unused
variables, and some irrelevant comments.
* Makefile.in (ALL_CFLAGS): Include $(BFDDEF).
(LIBS): Include $(BFDLIB). Don't bother with $(CLIB).
* configure.in: Permit --with-bfd-assembler now, with a warning.
Variable need_bfd is now a boolean, as is new variable bfd_gas.
Set BFDDEF and BFDLIB in Makefile when appropriate.
* as.c: Removed "#ifdef DONTDEF" and "#ifdef comment" code.
(main): Refer to flag_always_generate_output instead of
flagseen['Z'].
* as.c (main) [BFD_ASSEMBLER]: Open output bfd.
(*_section) [BFD_ASSEMBLER]: Define them.
(perform_an_assembly_pass) [BFD_ASSEMBLER]: Initialize them, and
set section flags when appropriate.
* as.h (SEG_NORMAL) [BFD_ASSEMBLER]: Require that the specified
section is not absolute, undefined, or an assembler internal one.
(absolute_section, undefined_section): Always define.
* expr.c, read.c, symbols.c: Refer to *_section, not SEG_*; break
switch statements into if-else trees.
* symbols.c [MANY_SEGMENTS]: Deleted redundant definitions of
SEG_BSS and SEG_DATA.
* as.h (frag_now_fix): New macro.
* symbols.c (colon): Use it.
Wed Jan 27 21:43:53 PST 1993 Ralph Campbell (ralphc@pyramid.com)
* config/tc-mips.c: Added mips support for mips-dec-bsd.
* config/tc-mips.h: Added mips support for mips-dec-bsd.
* config/ho-mipsbsd.h: Added mips support for mips-dec-bsd.
* config/mips-opcode.h: Added mips support for mips-dec-bsd.
* configure.in: Added mips support for mips-dec-bsd.
* atof-generic.c: Define TRUE and FALSE if not defined.
Thu Jan 21 12:48:19 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* version.c: Bumped version number to 1.93.05.
Wed Jan 20 17:11:53 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/obj-coff.c (obj_emit_relocations): Don't use #elif.
(obj_emit_lineno): Don't need return at end of void function.
(obj_symbol_new_hook): Ditto.
* config/tc-m68k.c: Removed some unused code.
(tc_aout_fix_to_chars): Array nbytes_r_length is now const.
* config/tc-m68k.h (TC_COUNT_RELOC): Don't emit reloc if only
offset field is set.
Fri Jan 8 05:44:49 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-sparc.c (sparc_ip): For %uhi and %ulo, if not
ENV64, emit no reloc.
(md_pseudo_table): For ".xword", call s_xword.
(s_xword): New function.
* config/tc-sparc.c (architecture_requested, warn_on_bump,
md_relax_table): Use default zero initialization.
(s_reserve): Since SEG_E2 is equivalent to SEG_BSS, just use the
latter, instead of selecting with preprocessor conditionals.
Thu Jan 7 08:58:21 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* configure.in: recognise all sparclite variants
Thu Jan 7 05:25:25 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* read.c (s_data) [!BFD_ASSEMBLER]: Fix typo in 4 Jan change --
accidentally changed to use subseg_change where it should have
been subseg_new.
Tue Jan 5 08:42:16 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* expr.c (operand): If character other than comma or newline is a
logical end-of-line character, use the newline case.
From Eric Youngdale:
(operand): Set X_add_number field for floating-point numbers.
(operand): Treat zero byte as end-of-operand.
* configure.in (per-target): Look for with_bfd_assembler option.
For now, only accept "no", until the merge is done.
Merged changes from Eric Youngdale (youngdale@v6550c.nrl.navy.mil):
* as.c, flonum-konst.c, hex-value.c, input-file.c, version.c,
config/obj-aout.h, config/obj-vms.c: VMS -> HO_VMS.
* read.c: Finish conversion to S_* macros in the VMS only
parts of the program. Add "const" modifier to hex_value.
* as.c, read.c, symbols.c, write.c: Change "ifdef VMS" to
"ifdef OBJ_VMS".
* expr.c: Add "const" modifier to hex_value.
* symbols.c: Finish conversion to S_* macros in the VMS only
parts of the program. Add "const" modifier to
md_[long,short]_jump_size. Remove declaration of const_flag
(which will be declared in obj-vms.h).
* write.c: Add "const" modifier to md_[long,short]_jump_size.
Fix arguments to VMS_write_object_file.
* config-gas.com: New file. Script for VMS systems to set up the
configuration to build gas for VMS, and create config.status.
* make-gas.com: Redone to work with new scheme.
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-vms.c: Patch to fix bug where we were not correctly parsing the
19990502 sourceware import
1999-05-03 09:29:11 +02:00
stabs directives.
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-vms.c: Define macros COPY_LONG and COPY_SHORT which
19990502 sourceware import
1999-05-03 09:29:11 +02:00
will swap bytes if needed on a big endian system. Use throughout
as needed.
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-vms.c (obj_aout_stab): Add code to generate listing file.
* config/obj-vms.c (VMS_typedef_parse): Add alias to correctly handle certain
19990502 sourceware import
1999-05-03 09:29:11 +02:00
types of malformed stabs. Change parsing algorithm so that we are
more certain of having all of the information that we need on hand.
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-vms.c (final_forward_reference): New function, used to help
19990502 sourceware import
1999-05-03 09:29:11 +02:00
resolve the data types of as many struct elements as possible
when some part of the struct is not fully defined by the compiler.
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-vms.c (VMS_LSYM_Parse): Correctly handle case of continuation
19990502 sourceware import
1999-05-03 09:29:11 +02:00
stabs directives.
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-vms.c (VMS_write_object_file): Define all vtable psects
19990502 sourceware import
1999-05-03 09:29:11 +02:00
as symbols as well in the object file. Look for external functions
that start with "__vt.", and turn them into variables, since the
g++ compiler is incapable of doing this.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-vax.c: Add '1' option for backward compatibility with older GCC
19990502 sourceware import
1999-05-03 09:29:11 +02:00
versions.
* bignum-copy.c (bignum_copy): Fix bug where we pad with zeroes.
* input-scrub.c (as_where): Fix bug where as would crash if we did not
have the name of the source file yet.
* config/ho-vms.h: define HO_VMS, not HO_VAX.
Mon Jan 4 05:17:26 1993 Ken Raeburn (raeburn@cygnus.com)
* read.c (s_data): Always use "data_section", since it'll map to
SEG_DATA or SEG_E1 if needed.
(s_lcomm): Likewise with bss_section.
(s_fill): Use memset, not bzero.
Thu Dec 31 04:29:27 1992 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* read.c: Deleted some code under "#ifdef DONTDEF" that was for
handling GDB symbol table data.
* config/obj-aout.h (segment_name): Delete definition.
(seg_name): Delete declaration.
* config/obj-bout.h (segment_name, seg_name): Ditto.
* config/obj-vms.h (segment_name, seg_name): Ditto.
* config/obj-coff.h (segment_name): Ditto.
* config/obj-coffbfd.h (segment_name): Ditto.
* Changes for BFD_ASSEMBLER:
* obj.h (obj_crawl_symbol_chain): Declare only if not
BFD_ASSEMBLER.
(obj_header_append, obj_pre_write_hook): Ditto.
* as.h (stdoutput): New var, defined only if BFD_ASSEMBLER.
(segT) [BFD_ASSEMBLER]: New typedef for "asection *".
(segment_name) If BFD_ASSEMBLER, look up BFD section name;
otherwise, use seg_name array.
(seg_name): Declare only if not BFD_ASSEMBLER.
(section_alignment): Declare only if not BFD_ASSEMBLER.
(big_section, reg_section, pass1_section, diff_section,
absent_section, text_section, data_section, bss_section): If
BFD_ASSEMBLER, declare as variables; otherwise, declare as macros,
mapping to segT enum values.
(tc_aout_fix_to_chars, next_object_file_charP): Force parse errors
if these are used or defined, if BFD_ASSEMBLER.
(subseg_set, subseg_new) [BFD_ASSEMBLER]: Functionality of old
subseg_new split into two functions.
(SEG_NORMAL): For BFD_ASSEMBLER, always return true, for now.
* as.h (volatile): Don't define if already defined.
(had_errors, had_warnings): Provide prototypes for ANSI C even if
NO_STDARG.
(as_bad, as_fatal, as_tsktsk, as_warn): For GNU C version 2,
declare with format attribute for -Wformat checking.
Wed Dec 30 10:18:57 1992 Ian Lance Taylor (ian@cygnus.com)
* app.c, config/tc-*.c: Don't include read.h, since it is already
included by as.h.
* These are based on patches from Minh Tran-le
<mtranle@paris.intellicorp.com>.
* configure.in (i[34]86-ibm-aix*): Accept i486 for host. Use
obj_format coffbfd and gas_target i386coff for target.
(i[34]86-*-isc*): New host (uses sysv).
* config/i386aix.mt: Removed (no longer used).
* config/mh-i386aix (RANLIB): Use true rather than /bin/true.
(MINUS_G): Removed.
(LDFLAGS): Added, defined as -shlib.
* config/te-i386aix.h (REVERSE_SORT_RELOCS): Undefine.
* config/te-sco386.h (LOCAL_LABEL): Don't define.
(DOT_LABEL_PREFIX): Define.
* expr.c (operand): If DOT_LABEL_PREFIX, use .L0\001 as a label
name rather than L0\001.
* read.c (s_lcomm): Make a frag in SEG_BSS rather than using
local_bss_counter.
* symbols.c, symbols.h (local_bss_counter): Removed.
* write.c (write_object_file): bss no longer uses
local_bss_counter. Pass correct data and bss size to
VMS_write_object_file.
* config/obj-vms.c (VMS_write_object_file): Accept bss size as
argument, rather than using local_bss_counter.
* config/tc-m88k.c (s_bss): Don't use local_bss_counter.
* config/tc-sparc.c (s_reserve): Don't use local_bss_counter.
* config/obj-coffbfd.c (had_lineno, had_reloc): Removed.
(size_section): Restored sanity check.
(do_relocs_for): Base section address on s_paddr rather than
computing it. Adjust a29k R_IHIHALF special case to account for
section paddr (used to require paddr to be zero). If there are no
reclos, set s_relptr to 0. Set relocation size in object_headers.
(fill_section): Always set s_vaddr here, removing
ZERO_BASED_SEGMENTS case. Force s_scnptr for bss to 0. Don't set
NOLOAD for i386 .bss, because it confuses the SVR3 native linker.
Set STYP_INFO for .comment.
(coff_header_append): Use object headers and H_{SET,GET}_* macros.
Make aouthdr writing depend on OBJ_COFF_OMIT_OPTIONAL_HEADER.
(crawl_symbols): Handle 8 character section name correctly. Use
H_{SET,GET}_* macros.
(do_linenos_for): Set lineno size in object_headers.
(write_object_file): Use H_{SET,GET}_* macros. Don't bother to
set s_vaddr here. If string_byte_count remains 4, set it back to
0, and only write strings out if there are some. Call
fill_section before do_relocs_for and do_linenos_for.
(obj_coff_section): Handle optional quoted second argument giving
section characteristics.
(obj_coff_bss): Added to handle .bss.
(obj_coff_ident): Added to handle .ident (puts string in .comment
section).
(obj_coff_lcomm): Put common symbols in .bss, not .data.
(fixup_mdeps): Change to segment. Call frag_wane after
md_convert_frag.
(fixup_segment): Explicitly check S_IS_COMMON before making 386
adjustment (already happened only for common symbols, but this is
clearer).
* config/obj-coffbfd.h (OBJ_COFF_OMIT_OPTIONAL_HEADER): Define.
* config/tc-i386.c (s_bss): Don't use if I386COFF.
(md_pseudo_table): Ignore .optim and .noopt.
(tc_coff_sizemachdep): New function.
* config/tc-i386.h (REVERSE_SORT_RELOCS): Undef, for SVR3
compatibility.
(LOCAL_LABEL): Removed definition.
(DOT_LABEL_PREFIX): Defined.
Mon Dec 28 10:32:05 1992 Ken Raeburn (raeburn@cygnus.com)
* app.c (app_push): Use memcpy, not bcopy.
(do_scrub_next_char): For \", return " not '.
(symbol_chars): Now const.
* expr.c (operand): If not LOCAL_LABELS_FB, don't look for "0f"
and "0b". If LOCAL_LABELS_DOLLAR, check for "0$".
* config/obj-coff.h: Don't use #elif.
* config/ho-sunos.h: Don't include sys/stdtypes.h; 4.0.3 doesn't
have it. (Reported by Noah Friedman, friedman@gnu.ai.mit.edu.)
Wed Dec 16 12:12:33 1992 Ian Lance Taylor (ian@cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* write.c, config/obj-ieee.c: don't define SUB_SEGMENT_ALIGN
if it is already defined.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Tue Dec 15 12:40:11 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* app.c (do_scrub_begin): allow single quote strings if so
configured.
* config/*z8k*: checkpoint
Sun Dec 13 00:04:38 1992 Ian Lance Taylor (ian@cygnus.com)
* read.c (read_a_source_file): avoid calling xmalloc (0).
Sat Dec 12 15:26:34 1992 Ian Lance Taylor (ian@cygnus.com)
* listing.c: Call xmalloc, not malloc; don't declare malloc.
* Changes to support SCO 3.2v4:
* read.c (s_align_bytes, s_align_ptwo): If not SEG_DATA or
SEG_BSS, fill with NOP_OPCODE.
* config/i386coff.mt: Add opcode/i386.h to TARG_CPU_DEPENDENTS.
* config/obj-coffbfd.c (do_relocs_for): Increment addr even if not
using ZERO_BASED_SEGMENTS.
(fill_section): If ZERO_BASED_SEGMENTS, set segment addresses, but
never set segment address for SEG_E2 (.bss) and don't write out
SEG_E2 contents. Set .init and .fini sections to STYP_TEXT.
(obj_coff_endef): Don't merge labels or symbols awaiting forward
definitions, and don't merge tags with non-tags. Check for .bf
rather than just checking whether the second character is b and
the third character is f.
(obj_coff_val): gcc can generate values which we don't handle
correctly; discard information for now, since it only affects the
debugging information.
(tag_find_or_name): Don't insert tags in the symbol table.
(yank_symbols): Don't merge labels.
(write_object_file): Don't define SUB_SEGMENT_ALIGN if it is
already defined. Fill subsegments with NOP_OPCODE, not 0. Don't
set segment address if ZERO_BASED_SEGMENTS.
(obj_coff_section): Accept and ignore a trailing quoted string, as
used in AT&T i386 syntax.
(fixup_segment): Take segment as argument. On the i386, adjust PC
relative addends by the segment vaddr.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-i386.h: Define SUB_SEGMENT_ALIGN.
* config/tc-a29k.h: Define ZERO_BASED_SEGMENTS.
* config/tc-i386.c: (i386_operand): If I386COFF, accept any segment type.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Tue Dec 8 00:06:48 1992 Ken Raeburn (raeburn@rtl.cygnus.com)
* config/obj-coffbfd.c: Include libcoff.h.
* version.c: Now version 1.93.
Mon Dec 7 00:39:09 1992 Ken Raeburn (raeburn@cygnus.com)
* config/tc-i386.c (md_pseudo_table): For 386bsd and linux, do
power-of-two alignment for .align.
* as.h: If BROKEN_ASSERT, just redefine `assert' to be trivial,
and leave everything else alone.
Fri Dec 4 16:58:42 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
* Makefile.in (as.new): Don't bother saving as.old.
* write.c: Conditionalize on OBJ_VMS, not VMS.
(magic_number_for_object_file): Don't define if OBJ_VMS.
* config/obj-vms.c: Changes for traditional C.
Thu Dec 3 01:24:07 1992 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* config/ho-generic.h (malloc, realloc): Declare.
* Lots of comment/whitespace changes.
* write.h (struct fix): Some fields reordered, narrowed.
* read.c (MASK_CHAR): Define using C types, not magic number.
* as.c, input-file.c: Deleted some unused code.
* app.c, as.h: Doc fix.
* flonum-konst.c, flonum-mult.c: Include ansidecl.h.
* as.h (xmalloc): Argument is long.
* xmalloc.c (error): Remove declaration; as.h takes care of it.
* doc/as.texinfo: Regrouped documentation of some command-line
options. Updated options documentation for m68k. Some minor
wording/punctuation changes.
Mon Nov 30 11:42:11 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
* configure.in: Accept target OS "vms".
* symbols.c: Merged ANSI and non-ANSI function decls, using
PARAMS macro.
* xmalloc.c: Just include as.h, don't bother trying to figure out
other header files.
* strstr.c, strerror.c: Deleted.
* Makefile.in: Deleted references.
* config/tc-ns32k.c: Don't include header file for string
declarations; leave that to ho-*.h.
Fri Nov 27 04:11:36 1992 Ken Raeburn (raeburn at cambridge-laptop.cygnus.com)
* config/coff_gnu.h [TC_I860]: Guesses for reloc type values,
imported from FSF sources.
* messages.c (strerror): Declare unconditionally.
* as.h: Delete alloca and register definitions.
* config/atof-ieee.c (mask): Now const.
* obstack.c, obstack.h: Deleted.
* as.h (flag_readonly_data_in_text): New flag.
* as.c (main): Set it for -R.
* as.h (flag_suppress_warnings): New flag.
* as.c (main): Set it for -W.
* messages.c (as_warn): Check it instead of flagseen['W'].
* as.h (flag_always_generate_output): New flag.
* as.c (main): Set it for -Z.
* config/tc-sparc.h: Define NEED_FX_R_TYPE.
* config/tc-a29k.h: Ditto.
* write.h (struct fix): Don't conditionalize fx_r_type field on TC
macros.
* as.h: Merged ANSI and non-ANSI function decls, using PARAMS
macro.
* bignum.h, expr.h, flonum.h, frags.h, input-file.h, listing.h,
obj.h, output-file.h, read.h, struc-symbol.h, symbols.h, tc.h,
write.h: Likewise.
* read.c: Likewise.
* xmalloc.c: Conditionalize on HAVE_MALLOC_H, not USG. Fold in
xrealloc from xrealloc.c.
* xrealloc.c: Deleted.
* Makefile.in (REAL_SOURCES, OBJS): Adjusted.
* configure.in: For host CPU a29k, rs6000, vax, consider using bsd
or vms ho- files.
* config/ho-sysv.h (setbuffer, HO_USG): Deleted.
* config/atof-ieee.c (atof_ieee): Exponent field isn't a pointer;
don't initialize it with NULL.
* config/ho-vax.h (M_VAX): Deleted; was unused.
* README-vms, config/ho-vms.h, config/obj-vms.c, config/obj-vms.h:
New files imported from FSF version, contributed by Eric Youngdale.
* README-vms-dbg, config/vms: Deleted.
* ChangeLog, config/ChangeLog: Merged.
* config/*tahoe*, configure.in: Tahoe support brought in from FSF
version.
* input-file.c (input_file_open): Eliminate call to setvbuf.
[USG] (setbuffer): Deleted macro.
Mon Nov 23 11:00:16 1992 Ken Raeburn (raeburn@cygnus.com)
* all files: Whitespace changes for GNU indentation style, done by
GNU `indent'. Some cleanup still needed, especially of comments.
* configure.in: No te-386bsd.h file exists; don't try to use it.
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-coff.c (obj_coff_endef): Use as_warn, not fprintf.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.c (md_assemble): Don't complain about 68000 with 68881;
19990502 sourceware import
1999-05-03 09:29:11 +02:00
could be doing emulation.
Thu Nov 19 11:47:19 1992 Steve Chamberlain (sac@thepub.cygnus.com)
z8000 documentation
* doc/Makefile.in, doc/all.m4, doc/as-all.texinfo, doc/as.texinfo:
all modified.
Tue Nov 10 09:49:24 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in (as.o, obj-format.o): added dependency on subsegs.h.
* subsegs.h: add extern to segment_info declaration.
* read.h: added extern declarations for comment_chars,
line_comment_chars, and line_separator_chars.
read.c, app.c: removed definitions of comment_chars,
line_comment_chars, and line_separator_chars.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.c (m68k_reg_parse): If REGISTER_PREFIX isn't defined,
19990502 sourceware import
1999-05-03 09:29:11 +02:00
still accept (but don't require) OPTIONAL_REGISTER_PREFIX before
the register name.
(insert_reg): put REGISTER_PREFIX before register names before
putting them in the symbol table.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.h (OPTIONAL_REGISTER_PREFIX): Define to be "%", if not
19990502 sourceware import
1999-05-03 09:29:11 +02:00
M68KCOFF.
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-coffbfd.c (fill_section): set STYP_NOLOAD bit for .bss
19990502 sourceware import
1999-05-03 09:29:11 +02:00
section.
Fix typos
2001-03-09 00:06:04 +01:00
* config/atof-ieee.c, config/atof-ns32k.c, config/tc-*.c: made
EXP_CHARS, FLT_CHARS, comment_chars, line_comment_chars and
line_seperator_chars consistently const, and always
initialized them. Included read.h.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Thu Nov 5 17:55:41 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-sparc.c (sparc_ip): Add code to flag error if an absolute
19990502 sourceware import
1999-05-03 09:29:11 +02:00
constant will not fit in an immediate field.
(md_apply_fix, RELOC_BASE13 case): Check for relocation overflow.
Wed Nov 4 07:50:46 1992 Ken Raeburn (raeburn@cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-coff.c (callj_table): Delete global variable.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
(obj_emit_relocations): Define it locally here, and only if
TC_I960 is defined.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.c (m68k_reg_parse): Underscore is part of a symbol name.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
(m68k_ip): Don't warn about bignum used as float bit-pattern.
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-coff.c: Replaced ANSI and non-ANSI function declarations
19990502 sourceware import
1999-05-03 09:29:11 +02:00
with a single set using PARAMS macro.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-i960.c (tc_bout_fix_to_chars): Bit-field fixups want a length
19990502 sourceware import
1999-05-03 09:29:11 +02:00
of 2.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-i960.c: Missed a couple of 0->NO_RELOC conversions.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-i960.h (N_BALNAME, N_CALLNAME): Define as char-type values,
19990502 sourceware import
1999-05-03 09:29:11 +02:00
so widening works consistently.
Wed Oct 28 08:52:34 1992 Ken Raeburn (raeburn@cygnus.com)
* version.c: Put conditional "const" before version_string, not
before dummy function for VMS. Now version 1.91.03.
* app.c (do_scrub_next_char): Need double-\ before `000' to show
printed rep of null character.
Fri Oct 23 14:40:38 1992 Ian Lance Taylor (ian@cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-coffbfd.c (write_object_file): check return value of
19990502 sourceware import
1999-05-03 09:29:11 +02:00
bfd_close_all_done.
Tue Oct 20 12:18:08 1992 Ian Lance Taylor (ian@cygnus.com)
* Support for i386-sysv.
obj-coffbfd.c (do_relocs_for, write_object_file): set segment
addresses to reasonable sizes. New define ZERO_BASED_SEGMENTS can
be used to set them all to zero as was done before.
(fill_section): segment addresses now set in write_object_file.
(fill_section): Don't set STYP_NOLOAD for .bss section.
(fixup_segment): 386 uses strange common symbol format.
tc-i386.c (tc_coff_fix2rtype): use R_DIR32, not R_RELLONG, for
compatibility with SVR3.2 linker.
* configure.in: i386-sysv and i386-sco use coffbfd.
* app.c (do_scrub_next_char): discard whitespace after a label.
Sat Oct 10 12:33:45 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* configure.in: differentiate between SunOS 4 and Solaris2 for Sun4
hosts, use the sysv configuration for solaris2
Mon Oct 5 09:28:57 1992 Steve Chamberlain (sac@thepub.cygnus.com)
fix i960+non-bfd coff bit rot.
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-coff.c (c_dot_file_symbol, obj_coff_ln, obj_coff_line):
19990502 sourceware import
1999-05-03 09:29:11 +02:00
support for C source listings. (obj_coff_endef): look in the right
part of the symbol for the symbol name
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.c (get_num): make it work for all segments, not just the
19990502 sourceware import
1999-05-03 09:29:11 +02:00
first three.
Mon Oct 5 03:30:36 1992 Mark Eichin (eichin at tweedledumber.cygnus.com)
* configure.in: recognize i386-*-bsd emulation.
Thu Oct 1 23:05:12 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* configure.in: use the cpu-vendor-os triple for host and target
Tue Sep 29 12:22:52 1992 Steve Chamberlain (sac@thepub.cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-coffbfd.c (write_object_file): don't fixup for the z8k
* config/tc-z8k.c: lots of bug fixes
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Tue Sep 29 10:51:55 1992 Ian Lance Taylor (ian@cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-i960.h, config/tc-i960.c: avoid the ANSI
preprocessor addition #elif, since it is not supported by old
compilers.
config/ho-rs6000.h, config/tc-m68k.c: the native RS/6000
compiler miscompiles a couple of expressions in tc-m68k.c.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Mon Sep 28 21:18:24 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
* read.c (cons): If NO_RELOC is defined, use it.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-i960.c (get_cdisp): Use NO_RELOC, not 0, in call to fix_new.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Fri Sep 25 18:18:52 1992 Ian Lance Taylor (ian@cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.h: if M68KCOFF, define DOT_LABEL_PREFIX (to require
19990502 sourceware import
1999-05-03 09:29:11 +02:00
local labels to start with a .) and set REGISTER_PREFIX to %.
tc-m68k.c (m68k_reg_parse): accept REGISTER_PREFIX if defined.
Fri Sep 25 17:53:43 1992 John Gilmore (gnu@cygnus.com)
* messages.c: Comment changes.
Fri Sep 25 14:12:58 1992 Ken Raeburn (raeburn@kyriath.cygnus.com)
* as.h: Test if __STDC__ is defined only, don't test its value.
* messages.c: If __STDC__ is not defined, define NO_STDARG.
Thu Sep 24 12:42:32 1992 Brendan Kehoe (brendan@rtl.cygnus.com)
* listing.c (debugging_pseudo): Add stabs and stabn as things to
ignore.
Tue Sep 22 13:02:07 1992 Sean Eric Fagan (sef@cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-coffbfd.c (do_relocs_for,fill_section): now allocate all
19990502 sourceware import
1999-05-03 09:29:11 +02:00
sections starting from zero, rather than making them consecutive.
This makes subsequent reloc calculations easier, esp if the object
format doesn't understand addends. (obj_coff_lcomm): (maybe temporarily)
allocate lcomm in .data rather than in .bss. It seems that some
tools can't cope with a non-zero sized bss before linkage.
Tue Sep 22 15:10:51 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.c: Replace "enum m68k_architecture" with "int"
19990502 sourceware import
1999-05-03 09:29:11 +02:00
throughout. That enum no longer means what we thought it meant.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.c (md_assemble, md_parse_option): Handle new
19990502 sourceware import
1999-05-03 09:29:11 +02:00
"-mno-688[58]1" options.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.c: Added CPU32 support.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Fri Sep 18 08:02:18 1992 Steve Chamberlain (sac@thepub.cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.c (m68k_ip): An(disp) is not pc relative.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Tue Sep 15 17:25:05 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
* Makefile.in (as.new): Remove dependence on LOCAL_LOADLIBES.
Change LIBDEPS dependence to LIBS.
Tue Sep 15 15:32:02 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in (install): if $(tooldir) exists, install as in
$(tooldir)/bin.
Sun Sep 13 20:30:10 1992 Ian Lance Taylor (ian@cygnus.com)
* Added WARN_SIGNED_OVERFLOW_WORD define to give an error if any
.word is < -32768 or > 32767. The -J flag causes the error to be
ignored. This is to catch over-sized switches generated by gcc on
systems which don't support the broken .word hack.
as.c (main): permit -J if WARN_SIGNED_OVERFLOW_WORD.
write.c (fixup_segment): check for signed .word overflow if
WARN_SIGNED_OVERFLOW_WORD.
* write.c (fixup_segment): fixed missing parens in expression
checking for byte or word overflow.
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-coffbfd.h: define WARN_SIGNED_OVERFLOW_WORD.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
obj-coffbfd.c (fixup_segment): check for signed .word overflow if
WARN_SIGNED_OVERFLOW_WORD.
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-coffbfd.c (fixup_segment): fixed missing parens in
19990502 sourceware import
1999-05-03 09:29:11 +02:00
expression checking for byte or word overflow.
Fri Sep 11 10:21:04 1992 Steve Chamberlain (sac@thepub.cygnus.com)
Support for i386 coff
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-coffbfd.h : added stuff
* config/tc-i386.c (tc_coff_fix2rtype): new function
* config/tc-i386.h : new coff defines
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Thu Sep 10 09:23:15 1992 Ian Lance Taylor (ian@cygnus.com)
* input-scrub.c (input_scrub_push): call input_file_begin, not
input_scrub_begin.
messages.c (as_perror): print ": " between the passed in error and
the strerror, like perror does.
Wed Sep 9 11:06:25 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: use gas_target instead of modifying target_cpu.
From Steve Chamberlain:
Makefile.in: Handle m68*-*-coff*.
read.c, read.h: add mult argument to s_space
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.c (m68k_ip, m68k_ip_op, get_num, try_moto_index): merge
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Motorola and MIT syntax; gas can now assemble either type of
file.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68kmote.c, config/tc-m68kmote.h: removed now
superfluous files.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
From Steve Chamberlain:
Fix typos
2001-03-09 00:06:04 +01:00
* config/m68kcoff.mt: for m68k COFF.
* config/obj-coffbfd.c: (fixup_mdeps) added
19990502 sourceware import
1999-05-03 09:29:11 +02:00
(size_section) removed bad sanity check
(fill_section) added rs_machine_dependent case
(write_object_file) call fixup_mdeps
(fixup_segment) set fx_subsy to 0.
Fix typos
2001-03-09 00:06:04 +01:00
* config/ obj-coffbfd.h: define WORKING_DOT_WORD (too hard to
support) and handle m68k.
* config/tc-m68k.c, config/tc-m68k.h: added m68k COFF support
and Motorala pseudo ops.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Tue Sep 8 17:10:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
* Makefile.in (LIBS): Include opcode library.
Fri Sep 4 18:20:56 1992 Ken Raeburn (raeburn@cygnus.com)
* config/tc-m68k.c (get_num, case SEG_BIG): If only small integers
including zero are accepted, pass +0.0.
Sun Aug 30 21:24:46 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: map "as" through program_transform_name when
installing.
* doc/Makefile.in: map "as" through program_transform_name when
installing.
Sat Aug 29 12:11:12 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
* Makefile.in (as.new): Depend on LOCAL_LOADLIBES.
Fri Aug 28 16:25:22 1992 Ian Lance Taylor (ian@cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-bout.h, config/obj-bout.c (obj_header_append,
obj_symbol_to_chars).
* config/tc-i960.c (md_ri_to_chars): Always output bout object
file in little endian byte order (used to use endianness of
host).
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Tue Aug 25 15:50:48 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-m68k.c (init_table): Now const. Always include 68851
data, so that "bc" is available to 68040 cache instructions.
Added "tt0", "tt1", and 68ec030 variants.
(md_assemble): Complain if 68000 (only) and 68881 are specified.
(enum _register): Added TT0, TT1.
(m68k_ip, cases '3' and 't'): Handle new operand type codes. Pass
line number correctly in "internal error" messages. Don't print
architecture-mismatch message for operand errors.
From Colin Smith (colin@wrs.com):
* config/tc-m68k.c (m68k_ip, case '_'): Use addword twice rather
than install_operand.
Tue Aug 25 15:13:48 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* listing.c (buffer_line): rewind to the start of include
files, they might be included twice.
* z8k.c, z8k.h, z8k.mt: z8000 support stuff
Mon Aug 24 12:45:43 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: defined TARGET_CPU for C code so that it can choose
one element of a family.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.c: use TARGET_CPU to choose default cpu type.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Fix typos
2001-03-09 00:06:04 +01:00
* config/te-generic.h: default to LOCAL_LABELS_DOLLAR and LOCAL_LABELS_FB
19990502 sourceware import
1999-05-03 09:29:11 +02:00
so that we can assemble hand-written libgcc code.
Fri Aug 21 14:38:44 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
* messages.c (as_warn): Use fputs, not fprintf, with a buffer that
has already been formatted (but may still contain %-characters).
(as_bad): Likewise.
Wed Aug 19 11:20:59 1992 Ian Lance Taylor (ian@cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.c, tc-m68kmote.c: the cas2 instruction is supposed to be
19990502 sourceware import
1999-05-03 09:29:11 +02:00
written with indirection on the last two operands, which can be
either data or address registers. Added a new operand type 'r'
which accepts either register type. Added '(' to notend stuff in
tc-m68kmote.c to accept (a0):(a2) in cas2 instruction.
Wed Aug 19 09:25:09 1992 Ken Raeburn (raeburn@cygnus.com)
* as.h (enum _relax_state): Start off at one, not zero, to better
catch uninitialized-variable errors.
(linkrelax): Declare new variable.
* messages.c (warning_count, error_count): Default initializer is
sufficient.
* write.c: Merged some declarations, using PARMS macro.
(text_frag_root, data_frag_root, bss_frag_root, text_last_frag,
data_last_frag): No longer static.
(write_object_file, case rs_align or rs_org): If HANDLE_ALIGN is
defined, call it. Change segments before calling fixup_segment.
(relax_align): If linkrelax, provide extra padding.
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-bout.c (obj_emit_relocations): Emit alignment relocs despite
19990502 sourceware import
1999-05-03 09:29:11 +02:00
their not having symbols associated.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-i960.c (norelax, instrument_branches): Default initializer is
19990502 sourceware import
1999-05-03 09:29:11 +02:00
sufficient.
(linkrelax): Delete variable definition.
(mem_fmt): Call fix_new with NO_RELOC.
(tc_bout_fix_to_chars): Handle alignment relocs.
(i960_handle_align): New function.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-i960.h (linkrelax): Delete declaration.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
(HANDLE_ALIGN): New macro; calls i960_handle_align.
(NEED_FX_R_TYPE, NO_RELOC): New macros.
Tue Aug 18 14:59:21 1992 Ken Raeburn (raeburn@cygnus.com)
* config/sparc.mt: New file. Grab sparc opcode table from bfd
library.
Tue Aug 18 14:16:38 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: always create installation directories. Removed
MINUS_G, set CFLAGS to default to -g, added FLAGS_TO_PASS, passed
FLAGS_TO_PASS to recursive makes.
* doc/Makefile.in: always create installation directories.
Mon Aug 17 15:09:56 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* input-scrub.c (input_scrub_pop, input_scrub_push): memcpy was
being used with args swapped, causing occasional lossage when
refilling buffers after an include file.
Mon Aug 17 13:18:51 1992 Ken Raeburn (raeburn@cygnus.com)
* messages.c (as_tsktsk): Use correct ANSI form for stdarg
version. Discard bogus DONTDEF version.
(as_warn, as_bad, as_fatal): Likewise.
Fri Aug 14 18:31:14 1992 Ken Raeburn (raeburn@cygnus.com)
* config/tc-m68k.c (m68k_ip): If instruction is invalid for the
selected architecture, print a message saying so and listing what
processors support it, rather than saying "operands mismatch".
Thu Aug 13 13:53:19 1992 Ken Raeburn (raeburn@cygnus.com)
* as.h [BROKEN_ASSERT]: If defined, turn off all assertion checks.
* config/ho-rs6000.h (M_RS6000): Don't define it.
(free): Declare it.
(BROKEN_ASSERT): Define it if not __STDC__.
Tue Aug 11 12:58:14 1992 Ken Raeburn (raeburn@cygnus.com)
* sparc.mt: New file.
Mon Aug 10 14:37:08 1992 Per Bothner (bothner@cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.c: ".align N" means align to N-byte boundary *only*
19990502 sourceware import
1999-05-03 09:29:11 +02:00
if TN_SUN3; otherwise align to 2**N-byte bounary.
Thu Aug 6 12:10:39 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* read.c (s_fill): make the .fill size clamped error a warn and
fix bug where 0's were always placed.
* config/tc-h8300.c: if a :8 is seen after an operand, fill top
two bytes of any constant with 0xff:
Wed Aug 5 12:02:40 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* config/tc-m68k.c (md_pseudo_table): fix the .align thing
the right way; for just the 68k. Sun 3 .align is nbytes, not ptwo.
Wed Aug 5 01:54:34 1992 John Gilmore (gnu at cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.c (try_index): Error if index scaling specified and
19990502 sourceware import
1999-05-03 09:29:11 +02:00
assembling for an older CPU than a 68020.
Sat Aug 1 19:10:13 1992 Ken Raeburn (raeburn@cygnus.com)
* config/tc-sparc.c (tc_aout_fix_to_chars): If pc-relative, take
fx_offset into account.
Fri Jul 31 21:53:28 1992 Ken Raeburn (raeburn@cygnus.com)
* configure.in (mips host): Accept "ultrix" with version number.
* expr.c (floating_constant): Separate "=-" to avoid confusing
ancient or broken compilers.
* config/tc-m68k.c (m68k_ip): Mismatch error could also indicate
processor/opcode mismatch, so reword the error message.
(md_assemble): If no CPU has been set (even if FPU/PMMU
characteristics have been), default to 68020. Don't need extra
quotes around error string.
Fri Jul 31 12:26:34 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
* read.c (potable): Revert sac's incorrect change made Jul 13.
Align really is supposed to be ptwo not nbytes.
Mon Jul 20 02:51:59 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
* Makefile.in: _Do_ include libiberty. (from sef)
Fri Jul 17 15:15:28 1992 Ken Raeburn (raeburn@cygnus.com)
* expr.c (integer_constant): Handle "0f" and "0b" label references
properly.
Thu Jul 16 08:20:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* write.c (fixup_segment): if relaxing, don't do anything.
* config/obj-bout.[ch] : maintain the a_relaxable file header info
* config/tc-i960.c: new option -linkrelax
Mon Jul 13 14:11:36 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* expr.c (expr): allow SEG_BSS in expressions
* read.c (potable): align should be nbytes, not ptwo!
* write.c (write_object_file): extra glue for new bss attributes
(relax_segment): SEG_BSS is ok now
* config/tc-m68k.c (m68k_ip_op): can now parse more @( modes
Mon Jul 6 17:09:32 1992 Steve Chamberlain (sac@cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-coffbfd.c (fill_section): mark .lit sections as STYP_LIT
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Mon Jun 1 16:20:22 1992 Michael Tiemann (tiemann@cygnus.com)
* configure.in: recognize m680x0 as having sun3 emulation mode for
vxworks environment.
Tue Jun 30 20:25:54 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
* Makefile.in: Add program_suffix (parallel to program_prefix)
Wed Jun 24 10:57:54 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* app.c (process_escape): new function to handle escapes the right
way, (do_scrub_next_char): use new function
* cond.c (s_ifdef): do ifdef/ifndef right
* read.c (s_fill): make the , expressions optional like the doc
says
* config/tc-h8300.[ch]: better warnings
Tue Jun 9 07:54:54 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* subsegs.c (subsegs_begin): create bss0_frchainP in the same was
as data0_frchainP
* write.c (write_object_file): various changes to handle data in
the BSS segment in much the same was as stuff in the DATA segment.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.c (m68kip): Fix typo so that only arch's >=68020 do
19990502 sourceware import
1999-05-03 09:29:11 +02:00
pcrel data stuff. (md_estimate_size_before_relax): when relaxing a
68010 bxx into a bra+6 jmpxx, put the bytes of the jmp opcode into
the right place. (s_bss): Don't put .bss stuff into SEG_DATA, put
it into SEG_BSS
Thu Jun 4 11:59:13 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* expr.c(expr): allow SEG_REGISTER in expressions.
* read.c(pseudo_set): register expressions can be the source of a
set.
* subsegs.c (subseg_new): Now -R forces all changes to SEG_DATA to
goto SEG_TEXT (if a.out)
* write.c (write_object_file): If a.out don't use the old way for
-R.
* config/obj-a.out (s_sect): complain if the user tries to use a
subsegment with a value which might interfere with out -R hackery.
* config/tc-m68k.c (m68k_reg_parse): lookup names in symbol table
rather than use ugly if tree. (init_regtable): insert register
names into symbol table.
Tue Jun 2 16:47:09 1992 Steve Chamberlain (sac@cygnus.com)
* write.c (write_object_file): keep the fix_tail clean, which
fixes a bug in -R where relocations were being lost.
Mon Jun 1 16:20:22 1992 Michael Tiemann (tiemann@cygnus.com)
* configure.in: recognize m680x0 as having sun3 emulation mode for
vxworks environment.
Sun May 31 05:33:00 1992 david d `zoo' zuhn (zoo@cygnus.com)
* configure.in: recognize m680x0 as an m68k
Thu May 28 11:22:02 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
* configure.in: Recognize sparclite as a sparc variant.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-sparc.c: Use new ARCHITECTURES_CONFLICT_P macro. Mention new
19990502 sourceware import
1999-05-03 09:29:11 +02:00
-Asparclite flag.
Tue May 26 16:47:56 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* config/tc-a29k.c: lint
* listing.c, expr.c: patches from Andrew Smith
Thu May 14 17:22:48 1992 K. Richard Pixley (rich@rtl.cygnus.com)
* doc/Makefile.in: use m4 rather than gm4.
Mon May 4 18:56:19 1992 Steve Chamberlain (sac@thepub.cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-coffbfd.c: use is a synonym for section, (do_relocs_for):
19990502 sourceware import
1999-05-03 09:29:11 +02:00
calc the base of relocs correctly.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-a29k.c (parse_operand): allow expressions to be in any section.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Mon Apr 27 13:13:31 1992 K. Richard Pixley (rich@cygnus.com)
* as.c, write.c: use -K rather than -k for the broken word warning
option.
Tue Apr 21 13:35:30 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in: do not print recursion lines.
Wed Apr 15 21:19:31 1992 K. Richard Pixley (rich@rtl.cygnus.com)
* Makefile.in: the tooldir copy of gas goes directly in tooldir.
Tue Apr 14 14:50:22 1992 Ken Raeburn (Raeburn@Cygnus.COM)
* write.c (write_object_file): For b.out format, round up section
start addresses to match required alignment.
Thu Apr 9 05:45:29 1992 Ken Raeburn (Raeburn@Cygnus.COM)
* Makefile.in (install): Install into $(tooldir)/bin, since that's
where gcc looks for it.
Tue Apr 7 15:12:15 1992 Sean Eric Fagan (sef@cygnus.com)
* Makefile.in: Changed some lines to be less confusing for some
makes.
* input-file.c: Conditionalize on _IOFBF, not VMS.
* read.c, write.c: Change a series of ifdef/elif to
ifdef/else/ifdef etc.
Fri Mar 27 12:21:16 1992 K. Richard Pixley (rich@cygnus.com)
* symbols.c (fb_label_init): fix sizeof to memset.
Fri Mar 13 15:45:44 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in: install the man page.
* Makefile.in: pass down MAKEINFO explicitly on info.
* doc/Makefile.in: use $(MAKEINFO) not makeinfo.
Fri Mar 13 08:03:03 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* flonum-const.c: renamed flonum-konst.c to stop dos name
conflict.
Thu Mar 12 04:42:38 1992 K. Richard Pixley (rich@cygnus.com)
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m68k.h, config/te-sun3.h: moved LOCAL_LABELS_FB
definition from tc-m68k.h to te-sun3.h.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Wed Mar 11 23:32:42 1992 K. Richard Pixley (rich@cygnus.com)
* configure.in: vxworks68 gets te-sun3.h.
* expr.c: remove limitation that local_labels_dollar or
local_labels_fb must be < 10.
* symbols.c: remove local_labels_dollar, replace with a function
interface for a sparse array. All users adjusted.
Fix typos
2001-03-09 00:06:04 +01:00
* config/te-sun3.h: add LOCAL_LABELS_DOLLAR.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Sat Mar 7 00:06:25 1992 K. Richard Pixley (rich@rtl.cygnus.com)
* doc/Makefile.in: commented out line for building as-all.texinfo.
This is temporary.
* doc/as.texinfo, doc/as-all.texinfo: added menu item hooks.
Fri Mar 6 21:57:18 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in: added check target.
Tue Mar 3 15:45:56 1992 K. Richard Pixley (rich@rtl.cygnus.com)
* Makefile.in: added tooldir and program_prefix.
Sun Mar 1 04:43:19 1992 Michael Tiemann (tiemann@cygnus.com)
* write.{c,h} (fix_new): Make these declarations consistent.
Sat Feb 29 13:59:10 1992 Michael Tiemann (tiemann@cygnus.com)
* Makefile.in (strerror.o): Add rule so that broken Sun make can
work in subdirs.
Wed Feb 26 19:26:28 1992 Steve Chamberlain (sac at thepub.cygnus.com)
* read.c, obj-coffbfd.c : fix h8300 specific bit rot
* expr.c (operand): if can't work out what sort of operand it is,
then look through FLT_CHARS for a hint.
Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in, configure.in: removed traces of namesubdir,
-subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
copyrights to '92, changed some from Cygnus to FSF.
* doc/Makefile.in, doc/configure.in: removed traces of namesubdir,
-subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
copyrights to '92, changed some from Cygnus to FSF.
Tue Feb 25 14:17:15 1992 Steve Chamberlain (sac at rtl.cygnus.com)
* expr.c: If an expression is single comma, then return with
SEG_ABSENT rather than an error - since the sparc front end does
really strange things with things like fbge,a
* as.h: include bfd.h if using many sections
* expr.c: LOCAL_LABELS_FB had been changed to lower case - so
local labels didn't work.
* listing.c (list_symbol_table): don't core dump when there's no
symbol there.
* write.c, write.h: call fix_new with the right number of args on
the H8.
* config/tc-h8300.[ch] : fix bugs reported by HMSI, and make
errors nices
Sat Feb 22 12:26:28 1992 Steve Chamberlain (sac at rtl.cygnus.com)
* app.c: MRI compatibility - allow single quote to start a string.
* as.c: fix typo recently introduced.
* as.h : Don't include aout/reloc.h - it's not right for COFF!
* ChangeLog: Fix typos. * ChangeLog-9295: Likewise. * as.c: Fix comment typos. * as.h: Likewise. * atof-generic.c: Likewise. * bit_fix.h: Likewise. * frags.h: Likewise. * hash.c: Likewise. * input-file.c: Likewise. * input-scrub.c: Likewise. * itbl-ops.c: Likewise. * itbl-parse.y: Likewise. * listing.c: Likewise. * macro.h: Likewise. * read.c: Likewise. * sb.c: Likewise. * sb.h: Likewise. * symbols.c: Likewise. * symbols.h: Likewise.
2003-10-27 13:45:17 +01:00
* expr.c: Much rewriting, to accommodate MRI syntax for
19990502 sourceware import
1999-05-03 09:29:11 +02:00
expressions. Also easier to read now.
* listing.c: Put back defuns
* read.c: modified to accept MRI syntax, put back listing pseudo
ops so that an assembler built with NO_LISTING ignores list ops
rather than pukes.
* write.c, write.h: fixs - only keep a reloc type in a fix if the target
machine is a SPARC or a 29K.
* config/obj-aout.c: added s_sect pseudo op
* config/obj-coffbfd.c: lints, set the filehdr flags right and
fill in the timestamp.
* config/obj-coffbfd.h: Since we don't include aout/reloc.h
anymore, define all the relocs which the tc-<x> bit will use so we
can translate from them to the coff types.
* config/tc-a29k.c: reloc_type isn't ane enum any more
* config/tc-m68k.c: Added NO_RELOC definition.
Fri Feb 21 06:21:07 1992 K. Richard Pixley (rich@rtl.cygnus.com)
* Makefile.in: put header files before C source for TAGS; remove
references to non-existent syscalls.h.
* read.c, write.c subsegs.c: back out the .bss changes.
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-aout.c: do not include stab.gnu.h if NO_LISTING.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-i860.c, a.out.gnu.h: move i860 relocs to a proper place.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
* a.out.h: removed.
Fri Feb 21 01:08:48 1992 Minh Tran-Le (TRANLE@INTELLICORP.COM)
* symbols.c (local_label_name): symbols now start with ^A.
* read.c, subsegs.c, write.c obj-coff.c: added handling of
`.bss` pseudo op for unitialized data. The new gcc (1.37.9x)
generate these sections. .align: will use NOP_OPCODE or 0
for padding. This is just for being nice to the
disassembler.
* expr.c (operand): changed to generate local label "\001L0"
starting with a ^A so that it is recognized as a local label.
* as.c (perform_an_assembly_pass): zero bss_fix_root, too.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-i386.c: tc-i386.c: added handling of the following opcodes:
19990502 sourceware import
1999-05-03 09:29:11 +02:00
i/o opcodes - inb, inw, outb and outw. string manipulation with
att syntax - scmp, slod, smov, ssca, ssto.
Fix typos
2001-03-09 00:06:04 +01:00
* config/obj-coff.c: (for aix386) Moved the symbols .text, .data and .bss
19990502 sourceware import
1999-05-03 09:29:11 +02:00
to just after .file .
In obj_crawl_symbol_chain() where it tries to put the external
symbols apart, with the condition:
(!S_IS_DEFINED(symbolP) &&
!S_IS_DEBUG(symbolP) &&
!SF_GET_STATICS(symbolP))
it was moving too many symbols out. So I switch it back to the
condition:
(S_GET_STORAGE_CLASS(symbolP) == C_EXT && !SF_GET_FUNCTION(symbolP))
In obj_emit_relocations() added the conditional on KEEP_RELOC_INFO
so that we don't use the F_RELFLG which make the linker complain
that somebody has stripped the relocation info.
Also, the AIX ld program require that the relocation table
is sorted by r_vaddr like the standard ATT assembler does.
[he also changed the sizeof(struct ...)'s into the coff
style FOOSZ macros. I'm not sure this is right, but I can't
remember why. xoxorich.]
Fri Feb 21 01:08:48 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in, configure.in, doc: use the doc. Build it, install
it, clean it, etc.
Tue Feb 18 02:21:25 1992 K. Richard Pixley (rich at cygnus.com)
* read.c: white space and comments only.
* configure.in: use the new atof-ns32.c for ns32k.
* write.c: comment change only.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-m88k.[hc]: pulled in from hack's unfinished work. These
19990502 sourceware import
1999-05-03 09:29:11 +02:00
aren't yet integrated.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-i860.[hc]: blew off the dust. Something must still be done
19990502 sourceware import
1999-05-03 09:29:11 +02:00
about conflicting relocation types.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-ns32k.c: Replaced previous tc_aout_fix_to_chars stub with the
19990502 sourceware import
1999-05-03 09:29:11 +02:00
real thing.
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-i960.c, config/tc-sparc.c: white space and comments only.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
Fix typos
2001-03-09 00:06:04 +01:00
* config/tc-a29k.h: delete duplicate macro definition.
19990502 sourceware import
1999-05-03 09:29:11 +02:00
* new file atof-ns32k.c copied from hack's last unreleased gas.
Mon Feb 17 07:51:06 1992 K. Richard Pixley (rich at cygnus.com)
* config/tc-ns32k.c: actually make tc_aout_fix_to_chars work
rather than abort.
* nearly everything. flush ChangeLog, package as gas-1.92.1.
ChangeLog's prior to this are sketchy at best. I have logs.
They just aren't ChangeLogs.
formatting, tack emacs control vars at end
2005-03-03 02:27:10 +01:00
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: