* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* config.in. Generated from configure.ac by autoheader. */
|
2002-02-20 00:48:14 +01:00
|
|
|
|
2010-09-01 03:51:07 +02:00
|
|
|
/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP
|
|
|
|
|
systems. This function is required for `alloca.c' support on those systems.
|
|
|
|
|
*/
|
|
|
|
|
#undef CRAY_STACKSEG_END
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if using `alloca.c'. */
|
|
|
|
|
#undef C_ALLOCA
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have `alloca', as a function or macro. */
|
|
|
|
|
#undef HAVE_ALLOCA
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).
|
|
|
|
|
*/
|
|
|
|
|
#undef HAVE_ALLOCA_H
|
|
|
|
|
|
2006-07-23 05:52:15 +02:00
|
|
|
/* Define to 1 if you have the <arpa/inet.h> header file. */
|
|
|
|
|
#undef HAVE_ARPA_INET_H
|
|
|
|
|
|
2011-10-07 14:06:48 +02:00
|
|
|
/* Define to 1 if you have the declaration of `ADDR_NO_RANDOMIZE', and to 0 if
|
|
|
|
|
you don't. */
|
|
|
|
|
#undef HAVE_DECL_ADDR_NO_RANDOMIZE
|
|
|
|
|
|
Create libiberty.m4, have GDB and GDBserver use it
Converting GDB to be a C++ program, I stumbled on 'basename' issues,
like:
src/gdb/../include/ansidecl.h:169:64: error: new declaration ‘char* basename(const char*)’
/usr/include/string.h:597:26: error: ambiguates old declaration ‘const char* basename(const char*)’
which I believe led to this bit in gold's configure.ac:
dnl We have to check these in C, not C++, because autoconf generates
dnl tests which have no type information, and current glibc provides
dnl multiple declarations of functions like basename when compiling
dnl with C++.
AC_CHECK_DECLS([basename, ffs, asprintf, vasprintf, snprintf, vsnprintf, strverscmp])
These checks IIUC intend to generate all the HAVE_DECL_FOO symbols
that libiberty.h and ansidecl.h check.
GDB is missing these checks currently, which results in the conflict
shown above.
This adds an m4 file that both GDB and GDBserver's configury use to
pull in the autoconf checks that libiberty clients needs done in order
to use these libiberty.h/ansidecl.h.
gdb/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* libiberty.m4: New file.
* acinclude.m4: Include libiberty.m4.
* configure.ac: Call libiberty_INIT.
* config.in, configure: Regenerate.
gdb/gdbserver/
2015-02-27 Pedro Alves <palves@redhat.com>
* acinclude.m4: Include libiberty.m4.
* configure.ac: Call libiberty_INIT.
* config.in, configure: Regenerate.
2015-02-27 16:52:02 +01:00
|
|
|
/* Define to 1 if you have the declaration of `asprintf', and to 0 if you
|
|
|
|
|
don't. */
|
|
|
|
|
#undef HAVE_DECL_ASPRINTF
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have the declaration of `basename(char *)', and to 0 if
|
|
|
|
|
you don't. */
|
|
|
|
|
#undef HAVE_DECL_BASENAME
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have the declaration of `ffs', and to 0 if you don't. */
|
|
|
|
|
#undef HAVE_DECL_FFS
|
|
|
|
|
|
gdb/
* arm-wince-tdep.c: New.
* config/arm/wince.mt (DEPRECATED_TM_FILE): Use tm-arm.h.
(MT_CFLAGS): Delete.
(TM_CLIBS): Delete.
(TDEPFILES): Add arm-wince-tdep.o, corelow.o, solib.o,
solib-legacy.o, solib-svr4.o, and remove wince.o.
* configure.tgt (arm*-*-mingw32ce*): Add.
* signals/signals.c [HAVE_SIGNAL_H]: Check.
(do_target_signal_to_host): Silence 'not used' warning.
* config/arm/tm-wince.h: Remove.
gdb/gdbserver/
* gdbserver/configure.ac: Add errno checking.
(AC_CHECK_HEADERS): Add errno.h, fcntl.h, signal.h,
sys/file.h and malloc.h.
(AC_CHECK_DECLS): Add perror.
(srv_mingwce): Handle.
* gdbserver/configure.srv (i[34567]86-*-cygwin*): Add
win32-i386-low.o to srv_tgtobj.
(i[34567]86-*-mingw*): Likewise.
(arm*-*-mingw32ce*): Add case.
* gdbreplay.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H,
HAVE_FCNTL_H, HAVE_ERRNO_H, HAVE_MALLOC_H]: Check.
[__MINGW32CE__] (strerror): New function.
[__MINGW32CE__] (errno): Define to GetLastError.
[__MINGW32CE__] (COUNTOF): New macro.
(remote_open): Remove extra close call.
* mem-break.c (delete_breakpoint_at): New function.
* mem-break.h (delete_breakpoint_at): Declare.
* remote-utils.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H,
HAVE_FCNTL_H, HAVE_UNISTD_H, HAVE_ERRNO_H]: Check.
[USE_WIN32API] (read, write): Add char* casts.
* server.c [HAVE_UNISTD_H, HAVE_SIGNAL_H]: Check.
* server.h: Include wincecompat.h on Windows CE.
[HAVE_ERRNO_H]: Check.
(perror): Declare if not declared.
* utils.c: Add stdlib.h, errno.h and malloc.h includes.
(perror_with_name): Remove errno declaration.
* wincecompat.h: New.
* wincecompat.c: New.
* win32-low.h: New.
* win32-arm-low.c: New.
* win32-i386-low.c: New.
(win32-low.c): Include mem-break.h and win32-low.h, and winnt.h.
(OUTMSG2): Make it safe.
(_T): New macro.
(COUNTOF): New macro.
(NUM_REGS): Get it from the low target.
(CONTEXT_EXTENDED_REGISTERS, CONTEXT_FLOATING_POINT,
CONTEXT_DEBUG_REGISTERS): Add fallbacks to 0.
(thread_rec): Let low target handle debug registers.
(child_add_thread): Likewise.
(child_init_thread_list): Likewise.
(continue_one_thread): Likewise.
(regptr): New.
(do_child_fetch_inferior_registers): Move to ...
* win32-i386-low.c: ... here, and rename to ...
(do_fetch_inferior_registers): ... this.
* win32-low.c (child_fetch_inferior_registers):
Go through the low target.
(do_child_store_inferior_registers): Use regptr.
(strwinerror): New function.
(win32_create_inferior): Handle Windows CE.
Use strwinerror instead of strerror on Windows error
codes. Add program to the error output.
Don't close the main thread handle on Windows CE.
(win32_attach): Use coredll.dll on Windows CE.
(win32_kill): Close current process and current
thread handles.
(win32_detach): Use coredll.dll on Windows CE.
(win32_resume): Let low target handle debug registers, and
step request.
(handle_exception): Add/Remove initial breakpoint. Avoid
non-existant WSTOPSIG on Windows CE.
(win32_read_inferior_memory): Cast to remove warning.
(win32_arch_string): Go through the low target.
(initialize_low): Call set_breakpoint_data with the low
target's breakpoint.
* win32-low.c (dr, FLAG_TRACE_BIT, FCS_REGNUM,
FOP_REGNUM, mappings): Move to ...
* win32-i386-low.c: ... here.
* win32-low.c (win32_thread_info): Move to ...
* win32-low.h: ... here.
* Makefile.in (SFILES): Add win32-low.c, win32-i386-low.c,
win32-arm-low.c and wincecompat.c.
(all:): Add $EXEEXT.
(install-only:): Likewise.
(gdbserver:): Likewise.
(gdbreplay:): Likewise.
* config.in: Regenerate.
* configure: Regenerate.
2007-03-29 03:06:48 +02:00
|
|
|
/* Define to 1 if you have the declaration of `perror', and to 0 if you don't.
|
|
|
|
|
*/
|
|
|
|
|
#undef HAVE_DECL_PERROR
|
|
|
|
|
|
2015-07-24 15:57:19 +02:00
|
|
|
/* Define to 1 if you have the declaration of `ptrace', and to 0 if you don't.
|
|
|
|
|
*/
|
|
|
|
|
#undef HAVE_DECL_PTRACE
|
|
|
|
|
|
Create libiberty.m4, have GDB and GDBserver use it
Converting GDB to be a C++ program, I stumbled on 'basename' issues,
like:
src/gdb/../include/ansidecl.h:169:64: error: new declaration ‘char* basename(const char*)’
/usr/include/string.h:597:26: error: ambiguates old declaration ‘const char* basename(const char*)’
which I believe led to this bit in gold's configure.ac:
dnl We have to check these in C, not C++, because autoconf generates
dnl tests which have no type information, and current glibc provides
dnl multiple declarations of functions like basename when compiling
dnl with C++.
AC_CHECK_DECLS([basename, ffs, asprintf, vasprintf, snprintf, vsnprintf, strverscmp])
These checks IIUC intend to generate all the HAVE_DECL_FOO symbols
that libiberty.h and ansidecl.h check.
GDB is missing these checks currently, which results in the conflict
shown above.
This adds an m4 file that both GDB and GDBserver's configury use to
pull in the autoconf checks that libiberty clients needs done in order
to use these libiberty.h/ansidecl.h.
gdb/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* libiberty.m4: New file.
* acinclude.m4: Include libiberty.m4.
* configure.ac: Call libiberty_INIT.
* config.in, configure: Regenerate.
gdb/gdbserver/
2015-02-27 Pedro Alves <palves@redhat.com>
* acinclude.m4: Include libiberty.m4.
* configure.ac: Call libiberty_INIT.
* config.in, configure: Regenerate.
2015-02-27 16:52:02 +01:00
|
|
|
/* Define to 1 if you have the declaration of `snprintf', and to 0 if you
|
|
|
|
|
don't. */
|
|
|
|
|
#undef HAVE_DECL_SNPRINTF
|
|
|
|
|
|
2005-07-01 19:18:06 +02:00
|
|
|
/* Define to 1 if you have the declaration of `strerror', and to 0 if you
|
|
|
|
|
don't. */
|
|
|
|
|
#undef HAVE_DECL_STRERROR
|
|
|
|
|
|
2012-08-08 21:48:19 +02:00
|
|
|
/* Define to 1 if you have the declaration of `strstr', and to 0 if you don't.
|
|
|
|
|
*/
|
|
|
|
|
#undef HAVE_DECL_STRSTR
|
|
|
|
|
|
Create libiberty.m4, have GDB and GDBserver use it
Converting GDB to be a C++ program, I stumbled on 'basename' issues,
like:
src/gdb/../include/ansidecl.h:169:64: error: new declaration ‘char* basename(const char*)’
/usr/include/string.h:597:26: error: ambiguates old declaration ‘const char* basename(const char*)’
which I believe led to this bit in gold's configure.ac:
dnl We have to check these in C, not C++, because autoconf generates
dnl tests which have no type information, and current glibc provides
dnl multiple declarations of functions like basename when compiling
dnl with C++.
AC_CHECK_DECLS([basename, ffs, asprintf, vasprintf, snprintf, vsnprintf, strverscmp])
These checks IIUC intend to generate all the HAVE_DECL_FOO symbols
that libiberty.h and ansidecl.h check.
GDB is missing these checks currently, which results in the conflict
shown above.
This adds an m4 file that both GDB and GDBserver's configury use to
pull in the autoconf checks that libiberty clients needs done in order
to use these libiberty.h/ansidecl.h.
gdb/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* libiberty.m4: New file.
* acinclude.m4: Include libiberty.m4.
* configure.ac: Call libiberty_INIT.
* config.in, configure: Regenerate.
gdb/gdbserver/
2015-02-27 Pedro Alves <palves@redhat.com>
* acinclude.m4: Include libiberty.m4.
* configure.ac: Call libiberty_INIT.
* config.in, configure: Regenerate.
2015-02-27 16:52:02 +01:00
|
|
|
/* Define to 1 if you have the declaration of `strtol', and to 0 if you don't.
|
|
|
|
|
*/
|
|
|
|
|
#undef HAVE_DECL_STRTOL
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have the declaration of `strtoll', and to 0 if you
|
|
|
|
|
don't. */
|
|
|
|
|
#undef HAVE_DECL_STRTOLL
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have the declaration of `strtoul', and to 0 if you
|
|
|
|
|
don't. */
|
|
|
|
|
#undef HAVE_DECL_STRTOUL
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have the declaration of `strtoull', and to 0 if you
|
|
|
|
|
don't. */
|
|
|
|
|
#undef HAVE_DECL_STRTOULL
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have the declaration of `strverscmp', and to 0 if you
|
|
|
|
|
don't. */
|
|
|
|
|
#undef HAVE_DECL_STRVERSCMP
|
|
|
|
|
|
2010-09-01 20:56:45 +02:00
|
|
|
/* Define to 1 if you have the declaration of `vasprintf', and to 0 if you
|
|
|
|
|
don't. */
|
|
|
|
|
#undef HAVE_DECL_VASPRINTF
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have the declaration of `vsnprintf', and to 0 if you
|
|
|
|
|
don't. */
|
|
|
|
|
#undef HAVE_DECL_VSNPRINTF
|
|
|
|
|
|
2009-12-21 21:52:53 +01:00
|
|
|
/* Define to 1 if you have the `dladdr' function. */
|
|
|
|
|
#undef HAVE_DLADDR
|
|
|
|
|
|
2012-03-30 22:23:16 +02:00
|
|
|
/* Define to 1 if the system has the type `Elf32_auxv_t'. */
|
|
|
|
|
#undef HAVE_ELF32_AUXV_T
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if the system has the type `Elf64_auxv_t'. */
|
|
|
|
|
#undef HAVE_ELF64_AUXV_T
|
|
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define if <sys/procfs.h> has elf_fpregset_t. */
|
|
|
|
|
#undef HAVE_ELF_FPREGSET_T
|
2002-02-20 00:48:14 +01:00
|
|
|
|
gdb/
* arm-wince-tdep.c: New.
* config/arm/wince.mt (DEPRECATED_TM_FILE): Use tm-arm.h.
(MT_CFLAGS): Delete.
(TM_CLIBS): Delete.
(TDEPFILES): Add arm-wince-tdep.o, corelow.o, solib.o,
solib-legacy.o, solib-svr4.o, and remove wince.o.
* configure.tgt (arm*-*-mingw32ce*): Add.
* signals/signals.c [HAVE_SIGNAL_H]: Check.
(do_target_signal_to_host): Silence 'not used' warning.
* config/arm/tm-wince.h: Remove.
gdb/gdbserver/
* gdbserver/configure.ac: Add errno checking.
(AC_CHECK_HEADERS): Add errno.h, fcntl.h, signal.h,
sys/file.h and malloc.h.
(AC_CHECK_DECLS): Add perror.
(srv_mingwce): Handle.
* gdbserver/configure.srv (i[34567]86-*-cygwin*): Add
win32-i386-low.o to srv_tgtobj.
(i[34567]86-*-mingw*): Likewise.
(arm*-*-mingw32ce*): Add case.
* gdbreplay.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H,
HAVE_FCNTL_H, HAVE_ERRNO_H, HAVE_MALLOC_H]: Check.
[__MINGW32CE__] (strerror): New function.
[__MINGW32CE__] (errno): Define to GetLastError.
[__MINGW32CE__] (COUNTOF): New macro.
(remote_open): Remove extra close call.
* mem-break.c (delete_breakpoint_at): New function.
* mem-break.h (delete_breakpoint_at): Declare.
* remote-utils.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H,
HAVE_FCNTL_H, HAVE_UNISTD_H, HAVE_ERRNO_H]: Check.
[USE_WIN32API] (read, write): Add char* casts.
* server.c [HAVE_UNISTD_H, HAVE_SIGNAL_H]: Check.
* server.h: Include wincecompat.h on Windows CE.
[HAVE_ERRNO_H]: Check.
(perror): Declare if not declared.
* utils.c: Add stdlib.h, errno.h and malloc.h includes.
(perror_with_name): Remove errno declaration.
* wincecompat.h: New.
* wincecompat.c: New.
* win32-low.h: New.
* win32-arm-low.c: New.
* win32-i386-low.c: New.
(win32-low.c): Include mem-break.h and win32-low.h, and winnt.h.
(OUTMSG2): Make it safe.
(_T): New macro.
(COUNTOF): New macro.
(NUM_REGS): Get it from the low target.
(CONTEXT_EXTENDED_REGISTERS, CONTEXT_FLOATING_POINT,
CONTEXT_DEBUG_REGISTERS): Add fallbacks to 0.
(thread_rec): Let low target handle debug registers.
(child_add_thread): Likewise.
(child_init_thread_list): Likewise.
(continue_one_thread): Likewise.
(regptr): New.
(do_child_fetch_inferior_registers): Move to ...
* win32-i386-low.c: ... here, and rename to ...
(do_fetch_inferior_registers): ... this.
* win32-low.c (child_fetch_inferior_registers):
Go through the low target.
(do_child_store_inferior_registers): Use regptr.
(strwinerror): New function.
(win32_create_inferior): Handle Windows CE.
Use strwinerror instead of strerror on Windows error
codes. Add program to the error output.
Don't close the main thread handle on Windows CE.
(win32_attach): Use coredll.dll on Windows CE.
(win32_kill): Close current process and current
thread handles.
(win32_detach): Use coredll.dll on Windows CE.
(win32_resume): Let low target handle debug registers, and
step request.
(handle_exception): Add/Remove initial breakpoint. Avoid
non-existant WSTOPSIG on Windows CE.
(win32_read_inferior_memory): Cast to remove warning.
(win32_arch_string): Go through the low target.
(initialize_low): Call set_breakpoint_data with the low
target's breakpoint.
* win32-low.c (dr, FLAG_TRACE_BIT, FCS_REGNUM,
FOP_REGNUM, mappings): Move to ...
* win32-i386-low.c: ... here.
* win32-low.c (win32_thread_info): Move to ...
* win32-low.h: ... here.
* Makefile.in (SFILES): Add win32-low.c, win32-i386-low.c,
win32-arm-low.c and wincecompat.c.
(all:): Add $EXEEXT.
(install-only:): Likewise.
(gdbserver:): Likewise.
(gdbreplay:): Likewise.
* config.in: Regenerate.
* configure: Regenerate.
2007-03-29 03:06:48 +02:00
|
|
|
/* Define to 1 if you have the <fcntl.h> header file. */
|
|
|
|
|
#undef HAVE_FCNTL_H
|
|
|
|
|
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 18:46:15 +02:00
|
|
|
/* Define to 1 if you have the `fdwalk' function. */
|
|
|
|
|
#undef HAVE_FDWALK
|
|
|
|
|
|
2016-01-18 10:45:10 +01:00
|
|
|
/* Define to 1 if you have the `fork' function. */
|
|
|
|
|
#undef HAVE_FORK
|
|
|
|
|
|
2014-11-28 02:18:26 +01:00
|
|
|
/* Define to 1 if you have the `getauxval' function. */
|
|
|
|
|
#undef HAVE_GETAUXVAL
|
|
|
|
|
|
2013-04-24 18:45:45 +02:00
|
|
|
/* Define to 1 if you have the `getrlimit' function. */
|
|
|
|
|
#undef HAVE_GETRLIMIT
|
|
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to 1 if you have the <inttypes.h> header file. */
|
|
|
|
|
#undef HAVE_INTTYPES_H
|
|
|
|
|
|
2013-04-24 18:45:45 +02:00
|
|
|
/* Define if you have <langinfo.h> and nl_langinfo(CODESET). */
|
|
|
|
|
#undef HAVE_LANGINFO_CODESET
|
|
|
|
|
|
2010-05-23 02:57:01 +02:00
|
|
|
/* Define to 1 if you have the `dl' library (-ldl). */
|
|
|
|
|
#undef HAVE_LIBDL
|
|
|
|
|
|
2013-08-21 23:32:42 +02:00
|
|
|
/* Define to 1 if you have the `mcheck' library (-lmcheck). */
|
|
|
|
|
#undef HAVE_LIBMCHECK
|
|
|
|
|
|
2013-03-11 09:35:11 +01:00
|
|
|
/* Define if the target supports branch tracing. */
|
|
|
|
|
#undef HAVE_LINUX_BTRACE
|
|
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to 1 if you have the <linux/elf.h> header file. */
|
|
|
|
|
#undef HAVE_LINUX_ELF_H
|
2002-02-27 08:07:49 +01:00
|
|
|
|
2012-11-28 17:21:58 +01:00
|
|
|
/* Define to 1 if you have the <linux/perf_event.h> header file. */
|
|
|
|
|
#undef HAVE_LINUX_PERF_EVENT_H
|
|
|
|
|
|
2005-07-13 17:21:02 +02:00
|
|
|
/* Define if the target supports register sets. */
|
2002-02-27 08:07:49 +01:00
|
|
|
#undef HAVE_LINUX_REGSETS
|
|
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define if the target supports PTRACE_PEEKUSR for register access. */
|
|
|
|
|
#undef HAVE_LINUX_USRREGS
|
2002-02-27 08:07:49 +01:00
|
|
|
|
2013-04-24 18:45:45 +02:00
|
|
|
/* Define to 1 if you have the <locale.h> header file. */
|
|
|
|
|
#undef HAVE_LOCALE_H
|
|
|
|
|
|
Create libiberty.m4, have GDB and GDBserver use it
Converting GDB to be a C++ program, I stumbled on 'basename' issues,
like:
src/gdb/../include/ansidecl.h:169:64: error: new declaration ‘char* basename(const char*)’
/usr/include/string.h:597:26: error: ambiguates old declaration ‘const char* basename(const char*)’
which I believe led to this bit in gold's configure.ac:
dnl We have to check these in C, not C++, because autoconf generates
dnl tests which have no type information, and current glibc provides
dnl multiple declarations of functions like basename when compiling
dnl with C++.
AC_CHECK_DECLS([basename, ffs, asprintf, vasprintf, snprintf, vsnprintf, strverscmp])
These checks IIUC intend to generate all the HAVE_DECL_FOO symbols
that libiberty.h and ansidecl.h check.
GDB is missing these checks currently, which results in the conflict
shown above.
This adds an m4 file that both GDB and GDBserver's configury use to
pull in the autoconf checks that libiberty clients needs done in order
to use these libiberty.h/ansidecl.h.
gdb/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* libiberty.m4: New file.
* acinclude.m4: Include libiberty.m4.
* configure.ac: Call libiberty_INIT.
* config.in, configure: Regenerate.
gdb/gdbserver/
2015-02-27 Pedro Alves <palves@redhat.com>
* acinclude.m4: Include libiberty.m4.
* configure.ac: Call libiberty_INIT.
* config.in, configure: Regenerate.
2015-02-27 16:52:02 +01:00
|
|
|
/* Define to 1 if the system has the type `long long'. */
|
|
|
|
|
#undef HAVE_LONG_LONG
|
|
|
|
|
|
2012-04-13 21:56:05 +02:00
|
|
|
/* Define if <thread_db.h> has lwpid_t. */
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
#undef HAVE_LWPID_T
|
2002-06-11 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/thread-db.c: New file.
* gdbserver/proc-service.c: New file.
* gdbserver/acinclude.m4: New file.
* gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h,
proc-service.o, and thread-db.o.
(linux-low.o): Add USE_THREAD_DB.
* gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T,
HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN.
* gdbserver/aclocal.m4: Regenerated.
* gdbserver/config.in: Regenerated.
* gdbserver/configure: Regenerated.
* gdbserver/configure.in: Check for proc_service.h, sys/procfs.h,
thread_db.h, and linux/elf.h headrs.
Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and
PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB.
Check for -lthread_db and thread support.
* gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS,
PowerPC, and SuperH.
* gdbserver/i387-fp.c: Constify arguments.
* gdbserver/i387-fp.h: Likewise.
* gdbserver/inferiors.c: (struct thread_info): Renamed from
`struct inferior_info'. Remove PID member. Use generic inferior
list header. All uses updated.
(inferiors, signal_pid): Removed.
(all_threads): New variable.
(get_thread): Define.
(add_inferior_to_list): New function.
(for_each_inferior): New function.
(change_inferior_id): New function.
(add_inferior): Removed.
(remove_inferior): New function.
(add_thread): New function.
(free_one_thread): New function.
(remove_thread): New function.
(clear_inferiors): Use for_each_inferior and free_one_thread.
(find_inferior): New function.
(find_inferior_id): New function.
(inferior_target_data): Update argument type.
(set_inferior_target_data): Likewise.
(inferior_regcache_data): Likewise.
(set_inferior_regcache_data): Likewise.
* gdbserver/linux-low.c (linux_bp_reinsert): Remove.
(all_processes, stopping_threads, using_thrads)
(struct pending_signals, debug_threads, pid_of): New.
(inferior_pid): Replace with macro.
(struct inferior_linux_data): Remove.
(get_stop_pc, add_process): New functions.
(linux_create_inferior): Restore SIGRTMIN+1 before calling exec.
Use add_process and add_thread.
(linux_attach_lwp): New function, based on old linux_attach. Use
add_process and add_thread. Set stop_expected for new threads.
(linux_attach): New function.
(linux_kill_one_process): New function.
(linux_kill): Kill all LWPs.
(linux_thread_alive): Use find_inferior_id.
(check_removed_breakpoints, status_pending_p): New functions.
(linux_wait_for_process): Renamed from linux_wait_for_one_inferior.
Update. Use WNOHANG. Wait for cloned processes also. Update process
struct for the found process.
(linux_wait_for_event): New function.
(linux_wait): Use it. Support LWPs.
(send_sigstop, wait_for_sigstop, stop_all_processes)
(linux_resume_one_process, linux_continue_one_process): New functions.
(linux_resume): Support LWPs.
(REGISTER_RAW_SIZE): Remove.
(fetch_register): Use register_size instead. Call supply_register.
(usr_store_inferior_registers): Likewise. Call collect_register.
Fix recursive case.
(regsets_fetch_inferior_registers): Improve error message.
(regsets_store_inferior_registers): Add debugging.
(linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB.
(unstopped_p, linux_signal_pid): New functions.
(linux_target_ops): Add linux_signal_pid.
(linux_init_signals): New function.
(initialize_low): Call it. Initialize using_threads.
* gdbserver/regcache.c (inferior_regcache_data): Add valid
flag.
(get_regcache): Fetch registers lazily. Add fetch argument
and update all callers.
(regcache_invalidate_one, regcache_invalidate): New
functions.
(new_register_cache): Renamed from create_register_cache.
Return the new regcache.
(free_register_cache): Change argument to a void *.
(registers_to_string, registers_from_string): Call get_regcache
with fetch flag set.
(register_data): Make static. Pass fetch flag to get_regcache.
(supply_register): Call get_regcache with fetch flag clear.
(collect_register): Call get_regcache with fetch flag set.
(collect_register_as_string): New function.
* gdbserver/regcache.h: Update.
* gdbserver/remote-utils.c (putpkt): Flush after debug output and use
stderr.
Handle input interrupts while waiting for an ACK.
(input_interrupt): Use signal_pid method.
(getpkt): Flush after debug output and use stderr.
(outreg): Use collect_register_as_string.
(new_thread_notify, dead_thread_notify): New functions.
(prepare_resume_reply): Check using_threads. Set thread_from_wait
and general_thread.
(look_up_one_symbol): Flush after debug output.
* gdbserver/server.c (step_thread, server_waiting): New variables.
(start_inferior): Don't use signal_pid. Update call to mywait.
(attach_inferior): Update call to mywait.
(handle_query): Handle qfThreadInfo and qsThreadInfo.
(main): Don't fetch/store registers explicitly. Use
set_desired_inferior. Support proposed ``Hs'' packet. Update
calls to mywait.
* gdbserver/server.h: Update.
(struct inferior_list, struct_inferior_list_entry): New.
* gdbserver/target.c (set_desired_inferior): New.
(write_inferior_memory): Constify.
(mywait): New function.
* gdbserver/target.h: Update.
(struct target_ops): New signal_pid method.
(mywait): Removed macro, added prototype.
* gdbserver/linux-low.h (regset_func): Removed.
(regset_fill_func, regset_store_func): New.
(enum regset_type): New.
(struct regset_info): Add type field. Use new operation types.
(struct linux_target_ops): stop_pc renamed to get_pc.
Add decr_pc_after_break and breakpoint_at.
(get_process, get_thread_proess, get_process_thread)
(strut process_info, all_processes, linux_attach_lwp)
(thread_db_init): New.
* gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc,
arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset)
(i386_store_fpxregset): Constify.
(target_regsets): Add new kind identifier.
(i386_get_pc): Renamed from i386_stop_pc. Simplify.
(i386_set_pc): Add debugging.
(i386_breakpoint_at): New function.
(the_low_target): Add new members.
* gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc)
(mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr)
(mips_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc)
(ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc)
(sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-x86-64-low.c (target_regsets): Add new kind
identifier.
2002-06-11 19:32:40 +02:00
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to 1 if you have the <memory.h> header file. */
|
|
|
|
|
#undef HAVE_MEMORY_H
|
|
|
|
|
|
2006-07-23 05:52:15 +02:00
|
|
|
/* Define to 1 if you have the <netdb.h> header file. */
|
|
|
|
|
#undef HAVE_NETDB_H
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have the <netinet/in.h> header file. */
|
|
|
|
|
#undef HAVE_NETINET_IN_H
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have the <netinet/tcp.h> header file. */
|
|
|
|
|
#undef HAVE_NETINET_TCP_H
|
|
|
|
|
|
2011-10-07 14:06:48 +02:00
|
|
|
/* Define if you support the personality syscall. */
|
|
|
|
|
#undef HAVE_PERSONALITY
|
|
|
|
|
|
2013-04-24 18:45:45 +02:00
|
|
|
/* Define to 1 if you have the `pipe' function. */
|
|
|
|
|
#undef HAVE_PIPE
|
|
|
|
|
|
PR gdb/7912:
* Makefile.in (SFILES): Add filestuff.c
(COMMON_OBS): Add filestuff.o.
(filestuff.o): New target.
* auto-load.c (auto_load_objfile_script_1): Use
gdb_fopen_cloexec.
* auxv.c (procfs_xfer_auxv): Use gdb_open_cloexec.
* cli/cli-cmds.c (shell_escape): Call close_most_fds.
* cli/cli-dump.c (fopen_with_cleanup): Use gdb_fopen_cloexec.
* common/agent.c (gdb_connect_sync_socket): Use
gdb_socket_cloexec.
* common/filestuff.c: New file.
* common/filestuff.h: New file.
* common/linux-osdata.c (linux_common_core_of_thread)
(command_from_pid, commandline_from_pid, print_source_lines)
(linux_xfer_osdata_shm, linux_xfer_osdata_sem)
(linux_xfer_osdata_msg, linux_xfer_osdata_modules): Use
gdb_fopen_cloexec.
* common/linux-procfs.c (linux_proc_get_int)
(linux_proc_pid_has_state): Use gdb_fopen_cloexec.
* config.in, configure: Rebuild.
* configure.ac: Don't check for sys/socket.h. Check for
fdwalk, pipe2.
* corelow.c (core_open): Use gdb_open_cloexec.
* dwarf2read.c (write_psymtabs_to_index): Use gdb_fopen_cloexec.
* fork-child.c (fork_inferior): Call close_most_fds.
* gdb_bfd.c (gdb_bfd_open): Use gdb_open_cloexec.
* inf-child.c (inf_child_fileio_readlink): Use gdb_open_cloexec.
* linux-nat.c (linux_nat_thread_name, linux_proc_pending_signals):
Use gdb_fopen_cloexec.
(linux_proc_xfer_partial, linux_proc_xfer_spu): Use
gdb_open_cloexec.
(linux_async_pipe): Use gdb_pipe_cloexec.
* remote-fileio.c (remote_fileio_func_open): Use
gdb_open_cloexec.
* remote.c (remote_file_put, remote_file_get): Use
gdb_fopen_cloexec.
* ser-pipe.c (pipe_open): Use gdb_socketpair_cloexec,
close_most_fds.
* ser-tcp.c (net_open): Use gdb_socket_cloexec.
* ser-unix.c (hardwire_open): Use gdb_open_cloexec.
* solib.c (solib_find): Use gdb_open_cloexec.
* source.c (openp, find_and_open_source): Use gdb_open_cloexec.
* tracepoint.c (tfile_start): Use gdb_fopen_cloexec.
(tfile_open): Use gdb_open_cloexec.
* tui/tui-io.c (tui_initialize_io): Use gdb_pipe_cloexec.
* ui-file.c (gdb_fopen): Use gdb_fopen_cloexec.
* xml-support.c (xml_fetch_content_from_file): Use
gdb_fopen_cloexec.
* main.c (captured_main): Call notice_open_fds.
gdbserver
* Makefile.in (SFILES): Add filestuff.c.
(OBS): Add filestuff.o.
(filestuff.o): New target.
* config.in, configure: Rebuild.
* configure.ac: Check for fdwalk, pipe2.
2013-04-22 18:46:15 +02:00
|
|
|
/* Define to 1 if you have the `pipe2' function. */
|
|
|
|
|
#undef HAVE_PIPE2
|
|
|
|
|
|
2007-12-16 22:50:05 +01:00
|
|
|
/* Define to 1 if you have the `pread' function. */
|
|
|
|
|
#undef HAVE_PREAD
|
|
|
|
|
|
2007-09-19 16:41:50 +02:00
|
|
|
/* Define to 1 if you have the `pread64' function. */
|
|
|
|
|
#undef HAVE_PREAD64
|
|
|
|
|
|
Fix gdbserver build failure on arm-android.
The following patch...
| proc-service, extern "C"
|
| libthread_db.so calls symbols in the client (GDB), through the
| proc-service interface. These routines must have extern "C" linkage
| so their symbol names are not mangled when GDB is built as a C++
| program. On the GDBserver side, we were missing fallback declarations for
| all these symbols.
|
| gdb/ChangeLog:
|
| * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
|
| gdb/gdbserver/ChangeLog:
| 2015-02-27 Pedro Alves <palves@redhat.com>
|
| * gdb_proc_service.h: Wrap with EXTERN_C_PUSH/EXTERN_C_POP.
| [!HAVE_PROC_SERVICE_H] (struct ps_prochandle): Forward declare.
| [!HAVE_PROC_SERVICE_H] (ps_pdread, ps_pdwrite, ps_ptread)
| ps_ptwrite, ps_lgetregs, ps_lsetregs, ps_lgetfpregs)
| (ps_lsetfpregs, ps_getpid)
| (ps_get_thread_area, ps_pglobal_lookup, ps_pstop, ps_pcontinue)
| (ps_lstop, ps_lcontinue, ps_lgetxregsize, ps_lgetxregs)
| (ps_lsetxregs, ps_plog): Declare.
... added a number of declarations which do not compile when cross-
compiling GDBserver on arm-android. The problem comes from type
prfpregset_t not being declared:
/[...]/gdbserver/gdb_proc_service.h:98:47:
error: unknown type name 'prfpregset_t'
After searching through the includes of the install we have,
I could not find that type being declared anywhere. So I did
the same as for prgregset_t, and created the typedef if the
type isn't declared.
gdb/gdbserver/ChangeLog:
* configure.ac: Add prfpregset_t BFD_HAVE_SYS_PROCFS_TYPE check.
* configure, config.in: Regenerate.
* gdb_proc_service.h [HAVE_PRFPREGSET_T] (prfpregset_t):
Declare typedef.
2015-03-24 18:19:10 +01:00
|
|
|
/* Define if <sys/procfs.h> has prfpregset_t. */
|
|
|
|
|
#undef HAVE_PRFPREGSET_T
|
|
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define if <sys/procfs.h> has prgregset_t. */
|
|
|
|
|
#undef HAVE_PRGREGSET_T
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have the <proc_service.h> header file. */
|
2002-06-11 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/thread-db.c: New file.
* gdbserver/proc-service.c: New file.
* gdbserver/acinclude.m4: New file.
* gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h,
proc-service.o, and thread-db.o.
(linux-low.o): Add USE_THREAD_DB.
* gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T,
HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN.
* gdbserver/aclocal.m4: Regenerated.
* gdbserver/config.in: Regenerated.
* gdbserver/configure: Regenerated.
* gdbserver/configure.in: Check for proc_service.h, sys/procfs.h,
thread_db.h, and linux/elf.h headrs.
Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and
PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB.
Check for -lthread_db and thread support.
* gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS,
PowerPC, and SuperH.
* gdbserver/i387-fp.c: Constify arguments.
* gdbserver/i387-fp.h: Likewise.
* gdbserver/inferiors.c: (struct thread_info): Renamed from
`struct inferior_info'. Remove PID member. Use generic inferior
list header. All uses updated.
(inferiors, signal_pid): Removed.
(all_threads): New variable.
(get_thread): Define.
(add_inferior_to_list): New function.
(for_each_inferior): New function.
(change_inferior_id): New function.
(add_inferior): Removed.
(remove_inferior): New function.
(add_thread): New function.
(free_one_thread): New function.
(remove_thread): New function.
(clear_inferiors): Use for_each_inferior and free_one_thread.
(find_inferior): New function.
(find_inferior_id): New function.
(inferior_target_data): Update argument type.
(set_inferior_target_data): Likewise.
(inferior_regcache_data): Likewise.
(set_inferior_regcache_data): Likewise.
* gdbserver/linux-low.c (linux_bp_reinsert): Remove.
(all_processes, stopping_threads, using_thrads)
(struct pending_signals, debug_threads, pid_of): New.
(inferior_pid): Replace with macro.
(struct inferior_linux_data): Remove.
(get_stop_pc, add_process): New functions.
(linux_create_inferior): Restore SIGRTMIN+1 before calling exec.
Use add_process and add_thread.
(linux_attach_lwp): New function, based on old linux_attach. Use
add_process and add_thread. Set stop_expected for new threads.
(linux_attach): New function.
(linux_kill_one_process): New function.
(linux_kill): Kill all LWPs.
(linux_thread_alive): Use find_inferior_id.
(check_removed_breakpoints, status_pending_p): New functions.
(linux_wait_for_process): Renamed from linux_wait_for_one_inferior.
Update. Use WNOHANG. Wait for cloned processes also. Update process
struct for the found process.
(linux_wait_for_event): New function.
(linux_wait): Use it. Support LWPs.
(send_sigstop, wait_for_sigstop, stop_all_processes)
(linux_resume_one_process, linux_continue_one_process): New functions.
(linux_resume): Support LWPs.
(REGISTER_RAW_SIZE): Remove.
(fetch_register): Use register_size instead. Call supply_register.
(usr_store_inferior_registers): Likewise. Call collect_register.
Fix recursive case.
(regsets_fetch_inferior_registers): Improve error message.
(regsets_store_inferior_registers): Add debugging.
(linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB.
(unstopped_p, linux_signal_pid): New functions.
(linux_target_ops): Add linux_signal_pid.
(linux_init_signals): New function.
(initialize_low): Call it. Initialize using_threads.
* gdbserver/regcache.c (inferior_regcache_data): Add valid
flag.
(get_regcache): Fetch registers lazily. Add fetch argument
and update all callers.
(regcache_invalidate_one, regcache_invalidate): New
functions.
(new_register_cache): Renamed from create_register_cache.
Return the new regcache.
(free_register_cache): Change argument to a void *.
(registers_to_string, registers_from_string): Call get_regcache
with fetch flag set.
(register_data): Make static. Pass fetch flag to get_regcache.
(supply_register): Call get_regcache with fetch flag clear.
(collect_register): Call get_regcache with fetch flag set.
(collect_register_as_string): New function.
* gdbserver/regcache.h: Update.
* gdbserver/remote-utils.c (putpkt): Flush after debug output and use
stderr.
Handle input interrupts while waiting for an ACK.
(input_interrupt): Use signal_pid method.
(getpkt): Flush after debug output and use stderr.
(outreg): Use collect_register_as_string.
(new_thread_notify, dead_thread_notify): New functions.
(prepare_resume_reply): Check using_threads. Set thread_from_wait
and general_thread.
(look_up_one_symbol): Flush after debug output.
* gdbserver/server.c (step_thread, server_waiting): New variables.
(start_inferior): Don't use signal_pid. Update call to mywait.
(attach_inferior): Update call to mywait.
(handle_query): Handle qfThreadInfo and qsThreadInfo.
(main): Don't fetch/store registers explicitly. Use
set_desired_inferior. Support proposed ``Hs'' packet. Update
calls to mywait.
* gdbserver/server.h: Update.
(struct inferior_list, struct_inferior_list_entry): New.
* gdbserver/target.c (set_desired_inferior): New.
(write_inferior_memory): Constify.
(mywait): New function.
* gdbserver/target.h: Update.
(struct target_ops): New signal_pid method.
(mywait): Removed macro, added prototype.
* gdbserver/linux-low.h (regset_func): Removed.
(regset_fill_func, regset_store_func): New.
(enum regset_type): New.
(struct regset_info): Add type field. Use new operation types.
(struct linux_target_ops): stop_pc renamed to get_pc.
Add decr_pc_after_break and breakpoint_at.
(get_process, get_thread_proess, get_process_thread)
(strut process_info, all_processes, linux_attach_lwp)
(thread_db_init): New.
* gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc,
arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset)
(i386_store_fpxregset): Constify.
(target_regsets): Add new kind identifier.
(i386_get_pc): Renamed from i386_stop_pc. Simplify.
(i386_set_pc): Add debugging.
(i386_breakpoint_at): New function.
(the_low_target): Add new members.
* gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc)
(mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr)
(mips_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc)
(ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc)
(sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-x86-64-low.c (target_regsets): Add new kind
identifier.
2002-06-11 19:32:40 +02:00
|
|
|
#undef HAVE_PROC_SERVICE_H
|
|
|
|
|
|
2012-04-13 21:56:05 +02:00
|
|
|
/* Define if <thread_db.h> has psaddr_t. */
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
#undef HAVE_PSADDR_T
|
|
|
|
|
|
|
|
|
|
/* Define if the target supports PTRACE_GETFPXREGS for extended register
|
|
|
|
|
access. */
|
|
|
|
|
#undef HAVE_PTRACE_GETFPXREGS
|
|
|
|
|
|
2005-07-13 17:21:02 +02:00
|
|
|
/* Define if the target supports PTRACE_GETREGS for register access. */
|
|
|
|
|
#undef HAVE_PTRACE_GETREGS
|
|
|
|
|
|
2015-07-24 15:57:19 +02:00
|
|
|
/* Define to 1 if you have the <ptrace.h> header file. */
|
|
|
|
|
#undef HAVE_PTRACE_H
|
|
|
|
|
|
2007-12-16 22:50:05 +01:00
|
|
|
/* Define to 1 if you have the `pwrite' function. */
|
|
|
|
|
#undef HAVE_PWRITE
|
|
|
|
|
|
2015-06-10 15:28:43 +02:00
|
|
|
/* Define to 1 if you have the `setns' function. */
|
|
|
|
|
#undef HAVE_SETNS
|
|
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to 1 if you have the <sgtty.h> header file. */
|
2002-02-20 00:48:14 +01:00
|
|
|
#undef HAVE_SGTTY_H
|
|
|
|
|
|
2016-08-09 21:16:20 +02:00
|
|
|
/* Define to 1 if you have the `sigaction' function. */
|
|
|
|
|
#undef HAVE_SIGACTION
|
|
|
|
|
|
gdb/
* arm-wince-tdep.c: New.
* config/arm/wince.mt (DEPRECATED_TM_FILE): Use tm-arm.h.
(MT_CFLAGS): Delete.
(TM_CLIBS): Delete.
(TDEPFILES): Add arm-wince-tdep.o, corelow.o, solib.o,
solib-legacy.o, solib-svr4.o, and remove wince.o.
* configure.tgt (arm*-*-mingw32ce*): Add.
* signals/signals.c [HAVE_SIGNAL_H]: Check.
(do_target_signal_to_host): Silence 'not used' warning.
* config/arm/tm-wince.h: Remove.
gdb/gdbserver/
* gdbserver/configure.ac: Add errno checking.
(AC_CHECK_HEADERS): Add errno.h, fcntl.h, signal.h,
sys/file.h and malloc.h.
(AC_CHECK_DECLS): Add perror.
(srv_mingwce): Handle.
* gdbserver/configure.srv (i[34567]86-*-cygwin*): Add
win32-i386-low.o to srv_tgtobj.
(i[34567]86-*-mingw*): Likewise.
(arm*-*-mingw32ce*): Add case.
* gdbreplay.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H,
HAVE_FCNTL_H, HAVE_ERRNO_H, HAVE_MALLOC_H]: Check.
[__MINGW32CE__] (strerror): New function.
[__MINGW32CE__] (errno): Define to GetLastError.
[__MINGW32CE__] (COUNTOF): New macro.
(remote_open): Remove extra close call.
* mem-break.c (delete_breakpoint_at): New function.
* mem-break.h (delete_breakpoint_at): Declare.
* remote-utils.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H,
HAVE_FCNTL_H, HAVE_UNISTD_H, HAVE_ERRNO_H]: Check.
[USE_WIN32API] (read, write): Add char* casts.
* server.c [HAVE_UNISTD_H, HAVE_SIGNAL_H]: Check.
* server.h: Include wincecompat.h on Windows CE.
[HAVE_ERRNO_H]: Check.
(perror): Declare if not declared.
* utils.c: Add stdlib.h, errno.h and malloc.h includes.
(perror_with_name): Remove errno declaration.
* wincecompat.h: New.
* wincecompat.c: New.
* win32-low.h: New.
* win32-arm-low.c: New.
* win32-i386-low.c: New.
(win32-low.c): Include mem-break.h and win32-low.h, and winnt.h.
(OUTMSG2): Make it safe.
(_T): New macro.
(COUNTOF): New macro.
(NUM_REGS): Get it from the low target.
(CONTEXT_EXTENDED_REGISTERS, CONTEXT_FLOATING_POINT,
CONTEXT_DEBUG_REGISTERS): Add fallbacks to 0.
(thread_rec): Let low target handle debug registers.
(child_add_thread): Likewise.
(child_init_thread_list): Likewise.
(continue_one_thread): Likewise.
(regptr): New.
(do_child_fetch_inferior_registers): Move to ...
* win32-i386-low.c: ... here, and rename to ...
(do_fetch_inferior_registers): ... this.
* win32-low.c (child_fetch_inferior_registers):
Go through the low target.
(do_child_store_inferior_registers): Use regptr.
(strwinerror): New function.
(win32_create_inferior): Handle Windows CE.
Use strwinerror instead of strerror on Windows error
codes. Add program to the error output.
Don't close the main thread handle on Windows CE.
(win32_attach): Use coredll.dll on Windows CE.
(win32_kill): Close current process and current
thread handles.
(win32_detach): Use coredll.dll on Windows CE.
(win32_resume): Let low target handle debug registers, and
step request.
(handle_exception): Add/Remove initial breakpoint. Avoid
non-existant WSTOPSIG on Windows CE.
(win32_read_inferior_memory): Cast to remove warning.
(win32_arch_string): Go through the low target.
(initialize_low): Call set_breakpoint_data with the low
target's breakpoint.
* win32-low.c (dr, FLAG_TRACE_BIT, FCS_REGNUM,
FOP_REGNUM, mappings): Move to ...
* win32-i386-low.c: ... here.
* win32-low.c (win32_thread_info): Move to ...
* win32-low.h: ... here.
* Makefile.in (SFILES): Add win32-low.c, win32-i386-low.c,
win32-arm-low.c and wincecompat.c.
(all:): Add $EXEEXT.
(install-only:): Likewise.
(gdbserver:): Likewise.
(gdbreplay:): Likewise.
* config.in: Regenerate.
* configure: Regenerate.
2007-03-29 03:06:48 +02:00
|
|
|
/* Define to 1 if you have the <signal.h> header file. */
|
|
|
|
|
#undef HAVE_SIGNAL_H
|
|
|
|
|
|
2014-08-07 16:53:21 +02:00
|
|
|
/* Define if sigsetjmp is available. */
|
|
|
|
|
#undef HAVE_SIGSETJMP
|
|
|
|
|
|
2013-04-24 18:45:45 +02:00
|
|
|
/* Define to 1 if you have the `socketpair' function. */
|
|
|
|
|
#undef HAVE_SOCKETPAIR
|
|
|
|
|
|
2005-06-14 23:36:29 +02:00
|
|
|
/* Define to 1 if the system has the type `socklen_t'. */
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
#undef HAVE_SOCKLEN_T
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have the <stdint.h> header file. */
|
|
|
|
|
#undef HAVE_STDINT_H
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have the <stdlib.h> header file. */
|
2003-03-17 20:39:53 +01:00
|
|
|
#undef HAVE_STDLIB_H
|
|
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to 1 if you have the <strings.h> header file. */
|
|
|
|
|
#undef HAVE_STRINGS_H
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have the <string.h> header file. */
|
2002-04-09 23:11:35 +02:00
|
|
|
#undef HAVE_STRING_H
|
|
|
|
|
|
2015-03-11 18:53:57 +01:00
|
|
|
/* Define to 1 if `struct stat' is a member of `st_blksize'. */
|
|
|
|
|
#undef HAVE_STRUCT_STAT_ST_BLKSIZE
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if `struct stat' is a member of `st_blocks'. */
|
|
|
|
|
#undef HAVE_STRUCT_STAT_ST_BLOCKS
|
|
|
|
|
|
gdb/gdbserver/
2010-06-01 Pedro Alves <pedro@codesourcery.com>
Stan Shebs <stan@codesourcery.com>
* Makefile.in (IPA_DEPFILES, extra_libraries): New.
(all): Depend on $(extra_libraries).
(install-only): Install the IPA.
(IPA_OBJS, IPA_LIB): New.
(clean): Remove the IPA lib.
(IPAGENT_CFLAGS): New.
(tracepoint-ipa.o, utils-ipa.o, remote-utils-ipa.o)
(regcache-ipa.o, i386-linux-ipa.o, linux-i386-ipa.o)
(linux-amd64-ipa.o, amd64-linux-ipa.o): New rules.
* linux-amd64-ipa.c, linux-i386-ipa.c: New files.
* configure.ac: Check for atomic builtins support in the compiler.
(IPA_DEPFILES, extra_libraries): Define.
* configure.srv (ipa_obj): Add description.
(ipa_i386_linux_regobj, ipa_amd64_linux_regobj): Define.
(i[34567]86-*-linux*): Set ipa_obj.
(x86_64-*-linux*): Set ipa_obj.
* linux-low.c (stabilizing_threads): New.
(supports_fast_tracepoints): New.
(linux_detach): Stabilize threads before detaching.
(handle_tracepoints): Handle internal tracing breakpoints. Assert
the lwp is either not stabilizing, or is moving out of a jump pad.
(linux_fast_tracepoint_collecting): New.
(maybe_move_out_of_jump_pad): New.
(enqueue_one_deferred_signal): New.
(dequeue_one_deferred_signal): New.
(linux_wait_for_event_1): If moving out of a jump pad, defer
pending signals to later.
(linux_stabilize_threads): New.
(linux_wait_1): Check if threads need moving out of jump pads, and
do it if so.
(stuck_in_jump_pad_callback): New.
(move_out_of_jump_pad_callback): New.
(lwp_running): New.
(linux_resume_one_lwp): Handle moving out of jump pads.
(linux_set_resume_request): Dequeue deferred signals.
(need_step_over_p): Also step over fast tracepoint jumps.
(start_step_over): Also uninsert fast tracepoint jumps.
(finish_step_over): Also reinsert fast tracepoint jumps.
(linux_install_fast_tracepoint_jump): New.
(linux_target_ops): Install linux_stabilize_threads and
linux_install_fast_tracepoint_jump_pad.
* linux-low.h (linux_target_ops) <get_thread_area,
install_fast_tracepoint_jump_pad>: New fields.
(struct lwp_info) <collecting_fast_tracepoint,
pending_signals_to_report, exit_jump_pad_bkpt>: New fields.
(linux_get_thread_area): Declare.
* linux-x86-low.c (jump_insn): New.
(x86_get_thread_area): New.
(append_insns): New.
(push_opcode): New.
(amd64_install_fast_tracepoint_jump_pad): New.
(i386_install_fast_tracepoint_jump_pad): New.
(x86_install_fast_tracepoint_jump_pad): New.
(the_low_target): Install x86_get_thread_area and
x86_install_fast_tracepoint_jump_pad.
* mem-break.c (set_raw_breakpoint_at): Use read_inferior_memory.
(struct fast_tracepoint_jump): New.
(fast_tracepoint_jump_insn): New.
(fast_tracepoint_jump_shadow): New.
(find_fast_tracepoint_jump_at): New.
(fast_tracepoint_jump_here): New.
(delete_fast_tracepoint_jump): New.
(set_fast_tracepoint_jump): New.
(uninsert_fast_tracepoint_jumps_at): New.
(reinsert_fast_tracepoint_jumps_at): New.
(set_breakpoint_at): Use write_inferior_memory.
(uninsert_raw_breakpoint): Use write_inferior_memory.
(check_mem_read): Mask out fast tracepoint jumps.
(check_mem_write): Mask out fast tracepoint jumps.
* mem-break.h (struct fast_tracepoint_jump): Forward declare.
(set_fast_tracepoint_jump): Declare.
(delete_fast_tracepoint_jump)
(fast_tracepoint_jump_here, uninsert_fast_tracepoint_jumps_at)
(reinsert_fast_tracepoint_jumps_at): Declare.
* regcache.c: Don't compile many functions when building the
in-process agent library.
(init_register_cache) [IN_PROCESS_AGENT]: Don't allow allocating
the register buffer in the heap.
(free_register_cache): If the register buffer isn't owned by the
regcache, don't free it.
(set_register_cache) [IN_PROCESS_AGENT]: Don't re-alocate
pre-existing register caches.
* remote-utils.c (convert_int_to_ascii): Constify `from' parameter
type.
(convert_ascii_to_int): : Constify `from' parameter type.
(decode_M_packet, decode_X_packet): Replace the `to' parameter by
a `to_p' pointer to pointer parameter. If TO_P is NULL, malloc
the needed buffer in-place.
(relocate_instruction): New.
* server.c (handle_query) <qSymbols>: If the target supports
tracepoints, give it a chance of looking up symbols. Report
support for fast tracepoints.
(handle_status): Stabilize threads.
(process_serial_event): Adjust.
* server.h (struct fast_tracepoint_jump): Forward declare.
(struct process_info) <fast_tracepoint_jumps>: New field.
(convert_ascii_to_int, convert_int_to_ascii): Adjust.
(decode_X_packet, decode_M_packet): Adjust.
(relocate_instruction): Declare.
(in_process_agent_loaded): Declare.
(tracepoint_look_up_symbols): Declare.
(struct fast_tpoint_collect_status): Declare.
(fast_tracepoint_collecting): Declare.
(force_unlock_trace_buffer): Declare.
(handle_tracepoint_bkpts): Declare.
(initialize_low_tracepoint)
(supply_fast_tracepoint_registers) [IN_PROCESS_AGENT]: Declare.
* target.h (struct target_ops) <stabilize_threads,
install_fast_tracepoint_jump_pad>: New fields.
(stabilize_threads, install_fast_tracepoint_jump_pad): New.
* tracepoint.c [HAVE_MALLOC_H]: Include malloc.h.
[HAVE_STDINT_H]: Include stdint.h.
(trace_debug_1): Rename to ...
(trace_vdebug): ... this.
(trace_debug): Rename to ...
(trace_debug_1): ... this. Add `level' parameter.
(trace_debug): New.
(ATTR_USED, ATTR_NOINLINE): New.
(IP_AGENT_EXPORT): New.
(gdb_tp_heap_buffer, gdb_jump_pad_buffer, gdb_jump_pad_buffer_end)
(collecting, gdb_collect, stop_tracing, flush_trace_buffer)
(about_to_request_buffer_space, trace_buffer_is_full)
(stopping_tracepoint, expr_eval_result, error_tracepoint)
(tracepoints, tracing, trace_buffer_ctrl, trace_buffer_ctrl_curr)
(trace_buffer_lo, trace_buffer_hi, traceframe_read_count)
(traceframe_write_count, traceframes_created)
(trace_state_variables)
New renaming defines.
(struct ipa_sym_addresses): New.
(STRINGIZE_1, STRINGIZE, IPA_SYM): New.
(symbol_list): New.
(ipa_sym_addrs): New.
(all_tracepoint_symbols_looked_up): New.
(in_process_agent_loaded): New.
(write_e_ipa_not_loaded): New.
(maybe_write_ipa_not_loaded): New.
(tracepoint_look_up_symbols): New.
(debug_threads) [IN_PROCESS_AGENT]: New.
(read_inferior_memory) [IN_PROCESS_AGENT]: New.
(UNKNOWN_SIDE_EFFECTS): New.
(stop_tracing): New.
(flush_trace_buffer): New.
(stop_tracing_bkpt): New.
(flush_trace_buffer_bkpt): New.
(read_inferior_integer): New.
(read_inferior_uinteger): New.
(read_inferior_data_pointer): New.
(write_inferior_data_pointer): New.
(write_inferior_integer): New.
(write_inferior_uinteger): New.
(struct collect_static_trace_data_action): Delete.
(enum tracepoint_type): New.
(struct tracepoint) <type>: New field `type'.
<actions_str, step_actions, step_actions_str>: Only include in GDBserver.
<orig_size, obj_addr_on_target, adjusted_insn_addr>
<adjusted_insn_addr_end, jump_pad, jump_pad_end>: New fields.
(tracepoints): Use IP_AGENT_EXPORT.
(last_tracepoint): Don't include in the IPA.
(stopping_tracepoint): Use IP_AGENT_EXPORT.
(trace_buffer_is_full): Use IP_AGENT_EXPORT.
(alloced_trace_state_variables): New.
(trace_state_variables): Use IP_AGENT_EXPORT.
(traceframe_t): Delete unused variable.
(circular_trace_buffer): Don't include in the IPA.
(trace_buffer_start): Delete.
(struct trace_buffer_control): New.
(trace_buffer_free): Delete.
(struct ipa_trace_buffer_control): New.
(GDBSERVER_FLUSH_COUNT_MASK, GDBSERVER_FLUSH_COUNT_MASK_PREV)
(GDBSERVER_FLUSH_COUNT_MASK_CURR, GDBSERVER_UPDATED_FLUSH_COUNT_BIT):
New.
(trace_buffer_ctrl): New.
(TRACE_BUFFER_CTRL_CURR): New.
(trace_buffer_start, trace_buffer_free, trace_buffer_end_free):
Reimplement as macros.
(trace_buffer_wrap): Delete.
(traceframe_write_count, traceframe_read_count)
(traceframes_created, tracing): Use IP_AGENT_EXPORT.
(struct tracepoint_hit_ctx) <type>: New field.
(struct fast_tracepoint_ctx): New.
(memory_barrier): New.
(cmpxchg): New.
(record_tracepoint_error): Update atomically in the IPA.
(clear_inferior_trace_buffer): New.
(about_to_request_buffer_space): New.
(trace_buffer_alloc): Handle GDBserver and inferior simulatenous
updating the same buffer.
(add_tracepoint): Default the tracepoint's type to trap
tracepoint, and orig_size to -1.
(get_trace_state_variable) [IN_PROCESS_AGENT]: Handle allocated
internal variables.
(create_trace_state_variable): New parameter `gdb'. Handle it.
(clear_installed_tracepoints): Clear fast tracepoint jumps.
(cmd_qtdp): Handle fast tracepoints.
(cmd_qtdv): Adjust.
(max_jump_pad_size): New.
(gdb_jump_pad_head): New.
(get_jump_space_head): New.
(claim_jump_space): New.
(sort_tracepoints): New.
(MAX_JUMP_SIZE): New.
(cmd_qtstart): Handle fast tracepoints. Sync tracepoints with the
IPA.
(stop_tracing) [IN_PROCESS_AGENT]: Don't include the tdisconnected
support. Upload fast traceframes, and delete internal IPA
breakpoints.
(stop_tracing_handler): New.
(flush_trace_buffer_handler): New.
(cmd_qtstop): Upload fast tracepoints.
(response_tracepoint): Handle fast tracepoints.
(tracepoint_finished_step): Upload fast traceframes. Set the
tracepoint hit context's tracepoint type.
(handle_tracepoint_bkpts): New.
(tracepoint_was_hit): Set the tracepoint hit context's tracepoint
type. Add comment about fast tracepoints.
(collect_data_at_tracepoint) [IN_PROCESS_AGENT]: Don't access the
non-existing action_str field.
(get_context_regcache): Handle fast tracepoints.
(do_action_at_tracepoint) [!IN_PROCESS_AGENT]: Don't write the PC
to the regcache.
(fast_tracepoint_from_jump_pad_address): New.
(fast_tracepoint_from_ipa_tpoint_address): New.
(collecting_t): New.
(force_unlock_trace_buffer): New.
(fast_tracepoint_collecting): New.
(collecting): New.
(gdb_collect): New.
(write_inferior_data_ptr): New.
(target_tp_heap): New.
(target_malloc): New.
(download_agent_expr): New.
(UALIGN): New.
(download_tracepoints): New.
(download_trace_state_variables): New.
(upload_fast_traceframes): New.
(IPA_FIRST_TRACEFRAME): New.
(IPA_NEXT_TRACEFRAME_1): New.
(IPA_NEXT_TRACEFRAME): New.
[IN_PROCESS_AGENT]: Include sys/mman.h and fcntl.h.
[IN_PROCESS_AGENT] (gdb_tp_heap_buffer, gdb_jump_pad_buffer)
(gdb_jump_pad_buffer_end): New.
[IN_PROCESS_AGENT] (initialize_tracepoint_ftlib): New.
(initialize_tracepoint): Adjust.
[IN_PROCESS_AGENT]: Allocate the IPA heap, and jump pad scratch
buffer. Initialize the low module.
* utils.c (PREFIX, TOOLNAME): New.
(malloc_failure): Use PREFIX.
(error): In the IPA, an error causes an exit.
(fatal, warning): Use PREFIX.
(internal_error): Use TOOLNAME.
(NUMCELLS): Increase to 10.
* configure, config.in: Regenerate.
gdb/
2010-06-01 Pedro Alves <pedro@codesourcery.com>
* NEWS: Mention gdbserver fast tracepoints support.
gdb/doc/
2010-06-01 Pedro Alves <pedro@codesourcery.com>
* gdb.texinfo (Set Tracepoints): Mention tracepoints support in
gdbserver, and add cross reference.
(Tracepoints support in gdbserver): New subsection.
2010-06-01 15:20:52 +02:00
|
|
|
/* Define to 1 if the target supports __sync_*_compare_and_swap */
|
|
|
|
|
#undef HAVE_SYNC_BUILTINS
|
|
|
|
|
|
gdb/
* arm-wince-tdep.c: New.
* config/arm/wince.mt (DEPRECATED_TM_FILE): Use tm-arm.h.
(MT_CFLAGS): Delete.
(TM_CLIBS): Delete.
(TDEPFILES): Add arm-wince-tdep.o, corelow.o, solib.o,
solib-legacy.o, solib-svr4.o, and remove wince.o.
* configure.tgt (arm*-*-mingw32ce*): Add.
* signals/signals.c [HAVE_SIGNAL_H]: Check.
(do_target_signal_to_host): Silence 'not used' warning.
* config/arm/tm-wince.h: Remove.
gdb/gdbserver/
* gdbserver/configure.ac: Add errno checking.
(AC_CHECK_HEADERS): Add errno.h, fcntl.h, signal.h,
sys/file.h and malloc.h.
(AC_CHECK_DECLS): Add perror.
(srv_mingwce): Handle.
* gdbserver/configure.srv (i[34567]86-*-cygwin*): Add
win32-i386-low.o to srv_tgtobj.
(i[34567]86-*-mingw*): Likewise.
(arm*-*-mingw32ce*): Add case.
* gdbreplay.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H,
HAVE_FCNTL_H, HAVE_ERRNO_H, HAVE_MALLOC_H]: Check.
[__MINGW32CE__] (strerror): New function.
[__MINGW32CE__] (errno): Define to GetLastError.
[__MINGW32CE__] (COUNTOF): New macro.
(remote_open): Remove extra close call.
* mem-break.c (delete_breakpoint_at): New function.
* mem-break.h (delete_breakpoint_at): Declare.
* remote-utils.c [HAVE_SYS_FILE_H, HAVE_SIGNAL_H,
HAVE_FCNTL_H, HAVE_UNISTD_H, HAVE_ERRNO_H]: Check.
[USE_WIN32API] (read, write): Add char* casts.
* server.c [HAVE_UNISTD_H, HAVE_SIGNAL_H]: Check.
* server.h: Include wincecompat.h on Windows CE.
[HAVE_ERRNO_H]: Check.
(perror): Declare if not declared.
* utils.c: Add stdlib.h, errno.h and malloc.h includes.
(perror_with_name): Remove errno declaration.
* wincecompat.h: New.
* wincecompat.c: New.
* win32-low.h: New.
* win32-arm-low.c: New.
* win32-i386-low.c: New.
(win32-low.c): Include mem-break.h and win32-low.h, and winnt.h.
(OUTMSG2): Make it safe.
(_T): New macro.
(COUNTOF): New macro.
(NUM_REGS): Get it from the low target.
(CONTEXT_EXTENDED_REGISTERS, CONTEXT_FLOATING_POINT,
CONTEXT_DEBUG_REGISTERS): Add fallbacks to 0.
(thread_rec): Let low target handle debug registers.
(child_add_thread): Likewise.
(child_init_thread_list): Likewise.
(continue_one_thread): Likewise.
(regptr): New.
(do_child_fetch_inferior_registers): Move to ...
* win32-i386-low.c: ... here, and rename to ...
(do_fetch_inferior_registers): ... this.
* win32-low.c (child_fetch_inferior_registers):
Go through the low target.
(do_child_store_inferior_registers): Use regptr.
(strwinerror): New function.
(win32_create_inferior): Handle Windows CE.
Use strwinerror instead of strerror on Windows error
codes. Add program to the error output.
Don't close the main thread handle on Windows CE.
(win32_attach): Use coredll.dll on Windows CE.
(win32_kill): Close current process and current
thread handles.
(win32_detach): Use coredll.dll on Windows CE.
(win32_resume): Let low target handle debug registers, and
step request.
(handle_exception): Add/Remove initial breakpoint. Avoid
non-existant WSTOPSIG on Windows CE.
(win32_read_inferior_memory): Cast to remove warning.
(win32_arch_string): Go through the low target.
(initialize_low): Call set_breakpoint_data with the low
target's breakpoint.
* win32-low.c (dr, FLAG_TRACE_BIT, FCS_REGNUM,
FOP_REGNUM, mappings): Move to ...
* win32-i386-low.c: ... here.
* win32-low.c (win32_thread_info): Move to ...
* win32-low.h: ... here.
* Makefile.in (SFILES): Add win32-low.c, win32-i386-low.c,
win32-arm-low.c and wincecompat.c.
(all:): Add $EXEEXT.
(install-only:): Likewise.
(gdbserver:): Likewise.
(gdbreplay:): Likewise.
* config.in: Regenerate.
* configure: Regenerate.
2007-03-29 03:06:48 +02:00
|
|
|
/* Define to 1 if you have the <sys/file.h> header file. */
|
|
|
|
|
#undef HAVE_SYS_FILE_H
|
|
|
|
|
|
2006-07-23 05:52:15 +02:00
|
|
|
/* Define to 1 if you have the <sys/ioctl.h> header file. */
|
|
|
|
|
#undef HAVE_SYS_IOCTL_H
|
|
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to 1 if you have the <sys/procfs.h> header file. */
|
2002-06-11 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/thread-db.c: New file.
* gdbserver/proc-service.c: New file.
* gdbserver/acinclude.m4: New file.
* gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h,
proc-service.o, and thread-db.o.
(linux-low.o): Add USE_THREAD_DB.
* gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T,
HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN.
* gdbserver/aclocal.m4: Regenerated.
* gdbserver/config.in: Regenerated.
* gdbserver/configure: Regenerated.
* gdbserver/configure.in: Check for proc_service.h, sys/procfs.h,
thread_db.h, and linux/elf.h headrs.
Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and
PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB.
Check for -lthread_db and thread support.
* gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS,
PowerPC, and SuperH.
* gdbserver/i387-fp.c: Constify arguments.
* gdbserver/i387-fp.h: Likewise.
* gdbserver/inferiors.c: (struct thread_info): Renamed from
`struct inferior_info'. Remove PID member. Use generic inferior
list header. All uses updated.
(inferiors, signal_pid): Removed.
(all_threads): New variable.
(get_thread): Define.
(add_inferior_to_list): New function.
(for_each_inferior): New function.
(change_inferior_id): New function.
(add_inferior): Removed.
(remove_inferior): New function.
(add_thread): New function.
(free_one_thread): New function.
(remove_thread): New function.
(clear_inferiors): Use for_each_inferior and free_one_thread.
(find_inferior): New function.
(find_inferior_id): New function.
(inferior_target_data): Update argument type.
(set_inferior_target_data): Likewise.
(inferior_regcache_data): Likewise.
(set_inferior_regcache_data): Likewise.
* gdbserver/linux-low.c (linux_bp_reinsert): Remove.
(all_processes, stopping_threads, using_thrads)
(struct pending_signals, debug_threads, pid_of): New.
(inferior_pid): Replace with macro.
(struct inferior_linux_data): Remove.
(get_stop_pc, add_process): New functions.
(linux_create_inferior): Restore SIGRTMIN+1 before calling exec.
Use add_process and add_thread.
(linux_attach_lwp): New function, based on old linux_attach. Use
add_process and add_thread. Set stop_expected for new threads.
(linux_attach): New function.
(linux_kill_one_process): New function.
(linux_kill): Kill all LWPs.
(linux_thread_alive): Use find_inferior_id.
(check_removed_breakpoints, status_pending_p): New functions.
(linux_wait_for_process): Renamed from linux_wait_for_one_inferior.
Update. Use WNOHANG. Wait for cloned processes also. Update process
struct for the found process.
(linux_wait_for_event): New function.
(linux_wait): Use it. Support LWPs.
(send_sigstop, wait_for_sigstop, stop_all_processes)
(linux_resume_one_process, linux_continue_one_process): New functions.
(linux_resume): Support LWPs.
(REGISTER_RAW_SIZE): Remove.
(fetch_register): Use register_size instead. Call supply_register.
(usr_store_inferior_registers): Likewise. Call collect_register.
Fix recursive case.
(regsets_fetch_inferior_registers): Improve error message.
(regsets_store_inferior_registers): Add debugging.
(linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB.
(unstopped_p, linux_signal_pid): New functions.
(linux_target_ops): Add linux_signal_pid.
(linux_init_signals): New function.
(initialize_low): Call it. Initialize using_threads.
* gdbserver/regcache.c (inferior_regcache_data): Add valid
flag.
(get_regcache): Fetch registers lazily. Add fetch argument
and update all callers.
(regcache_invalidate_one, regcache_invalidate): New
functions.
(new_register_cache): Renamed from create_register_cache.
Return the new regcache.
(free_register_cache): Change argument to a void *.
(registers_to_string, registers_from_string): Call get_regcache
with fetch flag set.
(register_data): Make static. Pass fetch flag to get_regcache.
(supply_register): Call get_regcache with fetch flag clear.
(collect_register): Call get_regcache with fetch flag set.
(collect_register_as_string): New function.
* gdbserver/regcache.h: Update.
* gdbserver/remote-utils.c (putpkt): Flush after debug output and use
stderr.
Handle input interrupts while waiting for an ACK.
(input_interrupt): Use signal_pid method.
(getpkt): Flush after debug output and use stderr.
(outreg): Use collect_register_as_string.
(new_thread_notify, dead_thread_notify): New functions.
(prepare_resume_reply): Check using_threads. Set thread_from_wait
and general_thread.
(look_up_one_symbol): Flush after debug output.
* gdbserver/server.c (step_thread, server_waiting): New variables.
(start_inferior): Don't use signal_pid. Update call to mywait.
(attach_inferior): Update call to mywait.
(handle_query): Handle qfThreadInfo and qsThreadInfo.
(main): Don't fetch/store registers explicitly. Use
set_desired_inferior. Support proposed ``Hs'' packet. Update
calls to mywait.
* gdbserver/server.h: Update.
(struct inferior_list, struct_inferior_list_entry): New.
* gdbserver/target.c (set_desired_inferior): New.
(write_inferior_memory): Constify.
(mywait): New function.
* gdbserver/target.h: Update.
(struct target_ops): New signal_pid method.
(mywait): Removed macro, added prototype.
* gdbserver/linux-low.h (regset_func): Removed.
(regset_fill_func, regset_store_func): New.
(enum regset_type): New.
(struct regset_info): Add type field. Use new operation types.
(struct linux_target_ops): stop_pc renamed to get_pc.
Add decr_pc_after_break and breakpoint_at.
(get_process, get_thread_proess, get_process_thread)
(strut process_info, all_processes, linux_attach_lwp)
(thread_db_init): New.
* gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc,
arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset)
(i386_store_fpxregset): Constify.
(target_regsets): Add new kind identifier.
(i386_get_pc): Renamed from i386_stop_pc. Simplify.
(i386_set_pc): Add debugging.
(i386_breakpoint_at): New function.
(the_low_target): Add new members.
* gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc)
(mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr)
(mips_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc)
(ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc)
(sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-x86-64-low.c (target_regsets): Add new kind
identifier.
2002-06-11 19:32:40 +02:00
|
|
|
#undef HAVE_SYS_PROCFS_H
|
|
|
|
|
|
2015-07-24 15:57:19 +02:00
|
|
|
/* Define to 1 if you have the <sys/ptrace.h> header file. */
|
|
|
|
|
#undef HAVE_SYS_PTRACE_H
|
|
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to 1 if you have the <sys/reg.h> header file. */
|
2002-02-20 00:48:14 +01:00
|
|
|
#undef HAVE_SYS_REG_H
|
|
|
|
|
|
2013-04-24 18:45:45 +02:00
|
|
|
/* Define to 1 if you have the <sys/resource.h> header file. */
|
|
|
|
|
#undef HAVE_SYS_RESOURCE_H
|
|
|
|
|
|
2006-07-23 05:52:15 +02:00
|
|
|
/* Define to 1 if you have the <sys/socket.h> header file. */
|
|
|
|
|
#undef HAVE_SYS_SOCKET_H
|
|
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to 1 if you have the <sys/stat.h> header file. */
|
|
|
|
|
#undef HAVE_SYS_STAT_H
|
|
|
|
|
|
2013-09-29 05:57:34 +02:00
|
|
|
/* Define to 1 if you have the <sys/syscall.h> header file. */
|
|
|
|
|
#undef HAVE_SYS_SYSCALL_H
|
|
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to 1 if you have the <sys/types.h> header file. */
|
|
|
|
|
#undef HAVE_SYS_TYPES_H
|
2002-02-20 00:48:14 +01:00
|
|
|
|
2012-03-03 04:08:36 +01:00
|
|
|
/* Define to 1 if you have the <sys/un.h> header file. */
|
|
|
|
|
#undef HAVE_SYS_UN_H
|
|
|
|
|
|
2006-07-23 05:52:15 +02:00
|
|
|
/* Define to 1 if you have the <sys/wait.h> header file. */
|
|
|
|
|
#undef HAVE_SYS_WAIT_H
|
|
|
|
|
|
2005-09-18 01:14:37 +02:00
|
|
|
/* Define if TD_VERSION is available. */
|
|
|
|
|
#undef HAVE_TD_VERSION
|
|
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to 1 if you have the <termios.h> header file. */
|
2002-02-20 00:48:14 +01:00
|
|
|
#undef HAVE_TERMIOS_H
|
2002-06-11 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/thread-db.c: New file.
* gdbserver/proc-service.c: New file.
* gdbserver/acinclude.m4: New file.
* gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h,
proc-service.o, and thread-db.o.
(linux-low.o): Add USE_THREAD_DB.
* gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T,
HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN.
* gdbserver/aclocal.m4: Regenerated.
* gdbserver/config.in: Regenerated.
* gdbserver/configure: Regenerated.
* gdbserver/configure.in: Check for proc_service.h, sys/procfs.h,
thread_db.h, and linux/elf.h headrs.
Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and
PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB.
Check for -lthread_db and thread support.
* gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS,
PowerPC, and SuperH.
* gdbserver/i387-fp.c: Constify arguments.
* gdbserver/i387-fp.h: Likewise.
* gdbserver/inferiors.c: (struct thread_info): Renamed from
`struct inferior_info'. Remove PID member. Use generic inferior
list header. All uses updated.
(inferiors, signal_pid): Removed.
(all_threads): New variable.
(get_thread): Define.
(add_inferior_to_list): New function.
(for_each_inferior): New function.
(change_inferior_id): New function.
(add_inferior): Removed.
(remove_inferior): New function.
(add_thread): New function.
(free_one_thread): New function.
(remove_thread): New function.
(clear_inferiors): Use for_each_inferior and free_one_thread.
(find_inferior): New function.
(find_inferior_id): New function.
(inferior_target_data): Update argument type.
(set_inferior_target_data): Likewise.
(inferior_regcache_data): Likewise.
(set_inferior_regcache_data): Likewise.
* gdbserver/linux-low.c (linux_bp_reinsert): Remove.
(all_processes, stopping_threads, using_thrads)
(struct pending_signals, debug_threads, pid_of): New.
(inferior_pid): Replace with macro.
(struct inferior_linux_data): Remove.
(get_stop_pc, add_process): New functions.
(linux_create_inferior): Restore SIGRTMIN+1 before calling exec.
Use add_process and add_thread.
(linux_attach_lwp): New function, based on old linux_attach. Use
add_process and add_thread. Set stop_expected for new threads.
(linux_attach): New function.
(linux_kill_one_process): New function.
(linux_kill): Kill all LWPs.
(linux_thread_alive): Use find_inferior_id.
(check_removed_breakpoints, status_pending_p): New functions.
(linux_wait_for_process): Renamed from linux_wait_for_one_inferior.
Update. Use WNOHANG. Wait for cloned processes also. Update process
struct for the found process.
(linux_wait_for_event): New function.
(linux_wait): Use it. Support LWPs.
(send_sigstop, wait_for_sigstop, stop_all_processes)
(linux_resume_one_process, linux_continue_one_process): New functions.
(linux_resume): Support LWPs.
(REGISTER_RAW_SIZE): Remove.
(fetch_register): Use register_size instead. Call supply_register.
(usr_store_inferior_registers): Likewise. Call collect_register.
Fix recursive case.
(regsets_fetch_inferior_registers): Improve error message.
(regsets_store_inferior_registers): Add debugging.
(linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB.
(unstopped_p, linux_signal_pid): New functions.
(linux_target_ops): Add linux_signal_pid.
(linux_init_signals): New function.
(initialize_low): Call it. Initialize using_threads.
* gdbserver/regcache.c (inferior_regcache_data): Add valid
flag.
(get_regcache): Fetch registers lazily. Add fetch argument
and update all callers.
(regcache_invalidate_one, regcache_invalidate): New
functions.
(new_register_cache): Renamed from create_register_cache.
Return the new regcache.
(free_register_cache): Change argument to a void *.
(registers_to_string, registers_from_string): Call get_regcache
with fetch flag set.
(register_data): Make static. Pass fetch flag to get_regcache.
(supply_register): Call get_regcache with fetch flag clear.
(collect_register): Call get_regcache with fetch flag set.
(collect_register_as_string): New function.
* gdbserver/regcache.h: Update.
* gdbserver/remote-utils.c (putpkt): Flush after debug output and use
stderr.
Handle input interrupts while waiting for an ACK.
(input_interrupt): Use signal_pid method.
(getpkt): Flush after debug output and use stderr.
(outreg): Use collect_register_as_string.
(new_thread_notify, dead_thread_notify): New functions.
(prepare_resume_reply): Check using_threads. Set thread_from_wait
and general_thread.
(look_up_one_symbol): Flush after debug output.
* gdbserver/server.c (step_thread, server_waiting): New variables.
(start_inferior): Don't use signal_pid. Update call to mywait.
(attach_inferior): Update call to mywait.
(handle_query): Handle qfThreadInfo and qsThreadInfo.
(main): Don't fetch/store registers explicitly. Use
set_desired_inferior. Support proposed ``Hs'' packet. Update
calls to mywait.
* gdbserver/server.h: Update.
(struct inferior_list, struct_inferior_list_entry): New.
* gdbserver/target.c (set_desired_inferior): New.
(write_inferior_memory): Constify.
(mywait): New function.
* gdbserver/target.h: Update.
(struct target_ops): New signal_pid method.
(mywait): Removed macro, added prototype.
* gdbserver/linux-low.h (regset_func): Removed.
(regset_fill_func, regset_store_func): New.
(enum regset_type): New.
(struct regset_info): Add type field. Use new operation types.
(struct linux_target_ops): stop_pc renamed to get_pc.
Add decr_pc_after_break and breakpoint_at.
(get_process, get_thread_proess, get_process_thread)
(strut process_info, all_processes, linux_attach_lwp)
(thread_db_init): New.
* gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc,
arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset)
(i386_store_fpxregset): Constify.
(target_regsets): Add new kind identifier.
(i386_get_pc): Renamed from i386_stop_pc. Simplify.
(i386_set_pc): Add debugging.
(i386_breakpoint_at): New function.
(the_low_target): Add new members.
* gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc)
(mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr)
(mips_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc)
(ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc)
(sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-x86-64-low.c (target_regsets): Add new kind
identifier.
2002-06-11 19:32:40 +02:00
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to 1 if you have the <termio.h> header file. */
|
|
|
|
|
#undef HAVE_TERMIO_H
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have the <thread_db.h> header file. */
|
2002-06-11 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/thread-db.c: New file.
* gdbserver/proc-service.c: New file.
* gdbserver/acinclude.m4: New file.
* gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h,
proc-service.o, and thread-db.o.
(linux-low.o): Add USE_THREAD_DB.
* gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T,
HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN.
* gdbserver/aclocal.m4: Regenerated.
* gdbserver/config.in: Regenerated.
* gdbserver/configure: Regenerated.
* gdbserver/configure.in: Check for proc_service.h, sys/procfs.h,
thread_db.h, and linux/elf.h headrs.
Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and
PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB.
Check for -lthread_db and thread support.
* gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS,
PowerPC, and SuperH.
* gdbserver/i387-fp.c: Constify arguments.
* gdbserver/i387-fp.h: Likewise.
* gdbserver/inferiors.c: (struct thread_info): Renamed from
`struct inferior_info'. Remove PID member. Use generic inferior
list header. All uses updated.
(inferiors, signal_pid): Removed.
(all_threads): New variable.
(get_thread): Define.
(add_inferior_to_list): New function.
(for_each_inferior): New function.
(change_inferior_id): New function.
(add_inferior): Removed.
(remove_inferior): New function.
(add_thread): New function.
(free_one_thread): New function.
(remove_thread): New function.
(clear_inferiors): Use for_each_inferior and free_one_thread.
(find_inferior): New function.
(find_inferior_id): New function.
(inferior_target_data): Update argument type.
(set_inferior_target_data): Likewise.
(inferior_regcache_data): Likewise.
(set_inferior_regcache_data): Likewise.
* gdbserver/linux-low.c (linux_bp_reinsert): Remove.
(all_processes, stopping_threads, using_thrads)
(struct pending_signals, debug_threads, pid_of): New.
(inferior_pid): Replace with macro.
(struct inferior_linux_data): Remove.
(get_stop_pc, add_process): New functions.
(linux_create_inferior): Restore SIGRTMIN+1 before calling exec.
Use add_process and add_thread.
(linux_attach_lwp): New function, based on old linux_attach. Use
add_process and add_thread. Set stop_expected for new threads.
(linux_attach): New function.
(linux_kill_one_process): New function.
(linux_kill): Kill all LWPs.
(linux_thread_alive): Use find_inferior_id.
(check_removed_breakpoints, status_pending_p): New functions.
(linux_wait_for_process): Renamed from linux_wait_for_one_inferior.
Update. Use WNOHANG. Wait for cloned processes also. Update process
struct for the found process.
(linux_wait_for_event): New function.
(linux_wait): Use it. Support LWPs.
(send_sigstop, wait_for_sigstop, stop_all_processes)
(linux_resume_one_process, linux_continue_one_process): New functions.
(linux_resume): Support LWPs.
(REGISTER_RAW_SIZE): Remove.
(fetch_register): Use register_size instead. Call supply_register.
(usr_store_inferior_registers): Likewise. Call collect_register.
Fix recursive case.
(regsets_fetch_inferior_registers): Improve error message.
(regsets_store_inferior_registers): Add debugging.
(linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB.
(unstopped_p, linux_signal_pid): New functions.
(linux_target_ops): Add linux_signal_pid.
(linux_init_signals): New function.
(initialize_low): Call it. Initialize using_threads.
* gdbserver/regcache.c (inferior_regcache_data): Add valid
flag.
(get_regcache): Fetch registers lazily. Add fetch argument
and update all callers.
(regcache_invalidate_one, regcache_invalidate): New
functions.
(new_register_cache): Renamed from create_register_cache.
Return the new regcache.
(free_register_cache): Change argument to a void *.
(registers_to_string, registers_from_string): Call get_regcache
with fetch flag set.
(register_data): Make static. Pass fetch flag to get_regcache.
(supply_register): Call get_regcache with fetch flag clear.
(collect_register): Call get_regcache with fetch flag set.
(collect_register_as_string): New function.
* gdbserver/regcache.h: Update.
* gdbserver/remote-utils.c (putpkt): Flush after debug output and use
stderr.
Handle input interrupts while waiting for an ACK.
(input_interrupt): Use signal_pid method.
(getpkt): Flush after debug output and use stderr.
(outreg): Use collect_register_as_string.
(new_thread_notify, dead_thread_notify): New functions.
(prepare_resume_reply): Check using_threads. Set thread_from_wait
and general_thread.
(look_up_one_symbol): Flush after debug output.
* gdbserver/server.c (step_thread, server_waiting): New variables.
(start_inferior): Don't use signal_pid. Update call to mywait.
(attach_inferior): Update call to mywait.
(handle_query): Handle qfThreadInfo and qsThreadInfo.
(main): Don't fetch/store registers explicitly. Use
set_desired_inferior. Support proposed ``Hs'' packet. Update
calls to mywait.
* gdbserver/server.h: Update.
(struct inferior_list, struct_inferior_list_entry): New.
* gdbserver/target.c (set_desired_inferior): New.
(write_inferior_memory): Constify.
(mywait): New function.
* gdbserver/target.h: Update.
(struct target_ops): New signal_pid method.
(mywait): Removed macro, added prototype.
* gdbserver/linux-low.h (regset_func): Removed.
(regset_fill_func, regset_store_func): New.
(enum regset_type): New.
(struct regset_info): Add type field. Use new operation types.
(struct linux_target_ops): stop_pc renamed to get_pc.
Add decr_pc_after_break and breakpoint_at.
(get_process, get_thread_proess, get_process_thread)
(strut process_info, all_processes, linux_attach_lwp)
(thread_db_init): New.
* gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc,
arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset)
(i386_store_fpxregset): Constify.
(target_regsets): Add new kind identifier.
(i386_get_pc): Renamed from i386_stop_pc. Simplify.
(i386_set_pc): Add debugging.
(i386_breakpoint_at): New function.
(the_low_target): Add new members.
* gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc)
(mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr)
(mips_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc)
(ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc)
(sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-x86-64-low.c (target_regsets): Add new kind
identifier.
2002-06-11 19:32:40 +02:00
|
|
|
#undef HAVE_THREAD_DB_H
|
|
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to 1 if you have the <unistd.h> header file. */
|
2002-07-24 23:30:46 +02:00
|
|
|
#undef HAVE_UNISTD_H
|
|
|
|
|
|
Static tracepoints support, and UST integration.
gdb/gdbserver/
* configure.ac: Handle --with-ust. substitute ustlibs and ustinc.
* mem-break.c (uninsert_all_breakpoints)
(reinsert_all_breakpoints): New.
* mem-break.h (reinsert_all_breakpoints, uninsert_all_breakpoints):
* tracepoint.c (ust_loaded, helper_thread_id, cmd_buf): New.
(gdb_agent_ust_loaded, helper_thread_id)
(gdb_agent_helper_thread_id): New macros.
(struct ipa_sym_addresses): Add addr_ust_loaded,
addr_helper_thread_id, addr_cmd_buf.
(symbol_list): Add ust_loaded, helper_thread_id, cmd_buf.
(in_process_agent_loaded_ust): New.
(write_e_ust_not_loaded): New.
(maybe_write_ipa_ust_not_loaded): New.
(struct collect_static_trace_data_action): New.
(enum tracepoint_type) <static_tracepoint>: New.
(struct tracepoint) <handle>: Mention static tracepoints.
(struct static_tracepoint_ctx): New.
(CMD_BUF_SIZE): New.
(add_tracepoint_action): Handle static tracepoint actions.
(unprobe_marker_at): New.
(clear_installed_tracepoints): Handle static tracepoints.
(cmd_qtdp): Handle static tracepoints.
(probe_marker_at): New.
(cmd_qtstart): Handle static tracepoints.
(response_tracepoint): Handle static tracepoints.
(cmd_qtfstm, cmd_qtsstm, cmd_qtstmat): New.
(handle_tracepoint_query): Handle qTfSTM, qTsSTM and qTSTMat.
(get_context_regcache): Handle static tracepoints.
(do_action_at_tracepoint): Handle static tracepoint actions.
(traceframe_find_block_type): Handle static trace data blocks.
(traceframe_read_sdata): New.
(download_tracepoints): Download static tracepoint actions.
[HAVE_UST] Include ust/ust.h, dlfcn.h, sys/socket.h, and sys/un.h.
(GDB_PROBE_NAME): New.
(ust_ops): New.
(GET_UST_SYM): New.
(USTF): New.
(dlsym_ust): New.
(ust_marker_to_static_tracepoint): New.
(gdb_probe): New.
(collect_ust_data_at_tracepoint): New.
(gdb_ust_probe): New.
(UNIX_PATH_MAX, SOCK_DIR): New.
(gdb_ust_connect_sync_socket): New.
(resume_thread, stop_thread): New.
(run_inferior_command): New.
(init_named_socket): New.
(gdb_ust_socket_init): New.
(cstr_to_hexstr): New.
(next_st): New.
(first_marker, next_marker): New.
(response_ust_marker): New.
(cmd_qtfstm, cmd_qtsstm): New.
(unprobe_marker_at, probe_marker_at): New.
(cmd_qtstmat, gdb_ust_thread): New.
(gdb_ust_init): New.
(initialize_tracepoint_ftlib): Call gdb_ust_init.
* linux-amd64-ipa.c [HAVE_UST]: Include ust/processor.h
(ST_REGENTRY): New.
(x86_64_st_collect_regmap): New.
(X86_64_NUM_ST_COLLECT_GREGS): New.
(AMD64_RIP_REGNUM): New.
(supply_static_tracepoint_registers): New.
* linux-i386-ipa.c [HAVE_UST]: Include ust/processor.h
(ST_REGENTRY): New.
(i386_st_collect_regmap): New.
(i386_NUM_ST_COLLECT_GREGS): New.
(supply_static_tracepoint_registers): New.
* server.c (handle_query): Handle qXfer:statictrace:read.
<qSupported>: Report support for StaticTracepoints, and
qXfer:statictrace:read features.
* server.h (traceframe_read_sdata)
(supply_static_tracepoint_registers): Declare.
* remote-utils.c (convert_int_to_ascii, hexchars, ishex, tohex)
(unpack_varlen_hex): Include in IPA build.
* Makefile.in (ustlibs, ustinc): New.
(IPA_OBJS): Add remote-utils-ipa.o.
($(IPA_LIB)): Link -ldl and -lpthread.
(UST_CFLAGS): New.
(IPAGENT_CFLAGS): Add UST_CFLAGS.
* config.in, configure: Regenerate.
gdb/
* NEWS: Mention new support for static tracepoints.
(New packets): Mention qTfSTM, qTsSTM, qTSTMat and
qXfer:statictrace:read.
(New features in the GDB remote stub, GDBserver): Mention static
tracepoints support using an UST based backend.
(New commands): Mention "info static-tracepoint-markers" and
"strace".
* breakpoint.c (is_marker_spec): New.
(is_tracepoint): Handle static tracepoints.
(validate_commands_for_breakpoint): Static tracepoints can't do
while-stepping.
(static_tracepoints_here): New.
(bpstat_what): Handle static tracepoints.
(print_one_breakpoint_location, allocate_bp_location, mention):
Ditto.
(create_breakpoint_sal): Ditto.
(decode_static_tracepoint_spec): New.
(create_breakpoint): Replace `hardwareflag', and `traceflag' with
`type_wanted'. Adjust. Handle static tracepoint marker
locations.
(break_command_1): Adjust.
(update_static_tracepoint): New.
(update_breakpoint_locations): Handle static tracepoints.
(breakpoint_re_set_one): Handle static tracepoint marker
locations.
(disable_command, enable_command): Handle static tracepoints.
(trace_command, ftrace_command): Adjust.
(strace_command): New.
(create_tracepoint_from_upload): Adjust.
(save_breakpoints): Handle static tracepoints.
(_initialize_breakpoint): Install the "strace" command.
* breakpoint.h (enum bptype): New bp_static_tracepoint type.
(struct breakpoint): New fields static_trace_marker_id and
static_trace_marker_id_idx.
(breakpoints_here_p): Declare.
(create_breakpoint): Adjust.
(static_tracepoints_here): Declare.
* remote.c (struct remote_state) <static_tracepoints>: New field.
(PACKET_qXfer_statictrace_read, PACKET_StaticTracepoints): New.
(remote_static_tracepoint_marker_at): New.
(remote_static_tracepoint_markers_by_strid): New.
(remote_static_tracepoint_feature): New.
(remote_disconnected_tracing_feature): Handle "StaticTracepoints".
(remote_xfer_partial): Handle TARGET_OBJECT_STATIC_TRACE_DATA.
(remote_supports_static_tracepoints): New.
(remote_download_tracepoint): Download static tracepoints.
(init_remote_ops): Install remote_static_tracepoint_marker_at and
remote_static_tracepoint_markers_by_strid.
(_initialize_remote): Install set|show remote static-tracepoints,
and set|show remote read-sdata-object commands.
* target.c (update_current_target): Inherit and default
to_static_tracepoint_marker_at, and
to_static_tracepoint_markers_by_strid.
* target.h (static_tracepoint_marker): Forward declare.
(enum target_object): New object TARGET_OBJECT_STATIC_TRACE_DATA.
(static_tracepoint_marker_p): New typedef.
(DEF_VEC_P(static_tracepoint_marker_p)): New VEC type.
(struct target_ops): New fields to_static_tracepoint_marker_at and
to_static_tracepoint_markers_by_strid.
(target_static_tracepoint_marker_at)
(target_static_tracepoint_markers_by_strid): New.
* tracepoint.c: Include source.h.
(validate_actionline): Handle $_sdata.
(struct collection_list): New field strace_data.
(add_static_trace_data): New.
(clear_collection_list): Clear strace_data.
(stringify_collection_list): Account for a possible static trace
data collection.
(encode_actions_1): Encode an $_sdata collection.
(parse_tracepoint_definition): Handle static tracepoints.
(parse_static_tracepoint_marker_definition): New.
(release_static_tracepoint_marker): New.
(print_one_static_tracepoint_marker): New.
(info_static_tracepoint_markers_command): New.
(sdata_make_value): New.
(_initialize_tracepoint): Create the $_sdata convenience variable.
Add the "info static-tracepoint-markers" command.
Mention $_sdata in the "collect" command's help output.
* tracepoint.h (struct static_tracepoint_marker): New.
(parse_static_tracepoint_marker_definition)
(release_static_tracepoint_marker): Declare.
* mi/mi-cmd-break.c (mi_cmd_break_insert): Adjust.
* python/py-breakpoint.c (bppy_new): Adjust.
doc/
* gdb.texinfo (Convenience Variables): Document $_sdata.
(Commands to Set Tracepoints): Describe static tracepoints. Add
`Listing Static Tracepoint Markers' menu entry. Document
"strace".
(Tracepoint Action Lists): Document collecting $_sdata.
(Listing Static Tracepoint Markers): New subsection.
(Tracepoints support in gdbserver): Mention static tracepoints.
(remote packets, enabling and disabling): Mention
read-sdata-object.
(General Query Packets) <qSupported>: Document qXfer:sdata:read
and StaticTracepoint.
Mention qTfSTM, qTsSTM and qTSTMat as tracepoint packets.
Document qXfer:sdata:read.
(Tracepoint packets): Document qTfSTM, qTsSTM and qTSTMat.
2010-07-01 12:36:12 +02:00
|
|
|
/* Define if UST is available */
|
|
|
|
|
#undef HAVE_UST
|
|
|
|
|
|
2016-01-18 10:45:10 +01:00
|
|
|
/* Define to 1 if you have the `vfork' function. */
|
|
|
|
|
#undef HAVE_VFORK
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if you have the <vfork.h> header file. */
|
|
|
|
|
#undef HAVE_VFORK_H
|
|
|
|
|
|
2012-11-15 17:12:19 +01:00
|
|
|
/* Define to 1 if you have the <wait.h> header file. */
|
|
|
|
|
#undef HAVE_WAIT_H
|
|
|
|
|
|
2016-01-18 10:45:10 +01:00
|
|
|
/* Define to 1 if `fork' works. */
|
|
|
|
|
#undef HAVE_WORKING_FORK
|
|
|
|
|
|
|
|
|
|
/* Define to 1 if `vfork' works. */
|
|
|
|
|
#undef HAVE_WORKING_VFORK
|
|
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to the address where bug reports for this package should be sent. */
|
|
|
|
|
#undef PACKAGE_BUGREPORT
|
2002-06-11 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/thread-db.c: New file.
* gdbserver/proc-service.c: New file.
* gdbserver/acinclude.m4: New file.
* gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h,
proc-service.o, and thread-db.o.
(linux-low.o): Add USE_THREAD_DB.
* gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T,
HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN.
* gdbserver/aclocal.m4: Regenerated.
* gdbserver/config.in: Regenerated.
* gdbserver/configure: Regenerated.
* gdbserver/configure.in: Check for proc_service.h, sys/procfs.h,
thread_db.h, and linux/elf.h headrs.
Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and
PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB.
Check for -lthread_db and thread support.
* gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS,
PowerPC, and SuperH.
* gdbserver/i387-fp.c: Constify arguments.
* gdbserver/i387-fp.h: Likewise.
* gdbserver/inferiors.c: (struct thread_info): Renamed from
`struct inferior_info'. Remove PID member. Use generic inferior
list header. All uses updated.
(inferiors, signal_pid): Removed.
(all_threads): New variable.
(get_thread): Define.
(add_inferior_to_list): New function.
(for_each_inferior): New function.
(change_inferior_id): New function.
(add_inferior): Removed.
(remove_inferior): New function.
(add_thread): New function.
(free_one_thread): New function.
(remove_thread): New function.
(clear_inferiors): Use for_each_inferior and free_one_thread.
(find_inferior): New function.
(find_inferior_id): New function.
(inferior_target_data): Update argument type.
(set_inferior_target_data): Likewise.
(inferior_regcache_data): Likewise.
(set_inferior_regcache_data): Likewise.
* gdbserver/linux-low.c (linux_bp_reinsert): Remove.
(all_processes, stopping_threads, using_thrads)
(struct pending_signals, debug_threads, pid_of): New.
(inferior_pid): Replace with macro.
(struct inferior_linux_data): Remove.
(get_stop_pc, add_process): New functions.
(linux_create_inferior): Restore SIGRTMIN+1 before calling exec.
Use add_process and add_thread.
(linux_attach_lwp): New function, based on old linux_attach. Use
add_process and add_thread. Set stop_expected for new threads.
(linux_attach): New function.
(linux_kill_one_process): New function.
(linux_kill): Kill all LWPs.
(linux_thread_alive): Use find_inferior_id.
(check_removed_breakpoints, status_pending_p): New functions.
(linux_wait_for_process): Renamed from linux_wait_for_one_inferior.
Update. Use WNOHANG. Wait for cloned processes also. Update process
struct for the found process.
(linux_wait_for_event): New function.
(linux_wait): Use it. Support LWPs.
(send_sigstop, wait_for_sigstop, stop_all_processes)
(linux_resume_one_process, linux_continue_one_process): New functions.
(linux_resume): Support LWPs.
(REGISTER_RAW_SIZE): Remove.
(fetch_register): Use register_size instead. Call supply_register.
(usr_store_inferior_registers): Likewise. Call collect_register.
Fix recursive case.
(regsets_fetch_inferior_registers): Improve error message.
(regsets_store_inferior_registers): Add debugging.
(linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB.
(unstopped_p, linux_signal_pid): New functions.
(linux_target_ops): Add linux_signal_pid.
(linux_init_signals): New function.
(initialize_low): Call it. Initialize using_threads.
* gdbserver/regcache.c (inferior_regcache_data): Add valid
flag.
(get_regcache): Fetch registers lazily. Add fetch argument
and update all callers.
(regcache_invalidate_one, regcache_invalidate): New
functions.
(new_register_cache): Renamed from create_register_cache.
Return the new regcache.
(free_register_cache): Change argument to a void *.
(registers_to_string, registers_from_string): Call get_regcache
with fetch flag set.
(register_data): Make static. Pass fetch flag to get_regcache.
(supply_register): Call get_regcache with fetch flag clear.
(collect_register): Call get_regcache with fetch flag set.
(collect_register_as_string): New function.
* gdbserver/regcache.h: Update.
* gdbserver/remote-utils.c (putpkt): Flush after debug output and use
stderr.
Handle input interrupts while waiting for an ACK.
(input_interrupt): Use signal_pid method.
(getpkt): Flush after debug output and use stderr.
(outreg): Use collect_register_as_string.
(new_thread_notify, dead_thread_notify): New functions.
(prepare_resume_reply): Check using_threads. Set thread_from_wait
and general_thread.
(look_up_one_symbol): Flush after debug output.
* gdbserver/server.c (step_thread, server_waiting): New variables.
(start_inferior): Don't use signal_pid. Update call to mywait.
(attach_inferior): Update call to mywait.
(handle_query): Handle qfThreadInfo and qsThreadInfo.
(main): Don't fetch/store registers explicitly. Use
set_desired_inferior. Support proposed ``Hs'' packet. Update
calls to mywait.
* gdbserver/server.h: Update.
(struct inferior_list, struct_inferior_list_entry): New.
* gdbserver/target.c (set_desired_inferior): New.
(write_inferior_memory): Constify.
(mywait): New function.
* gdbserver/target.h: Update.
(struct target_ops): New signal_pid method.
(mywait): Removed macro, added prototype.
* gdbserver/linux-low.h (regset_func): Removed.
(regset_fill_func, regset_store_func): New.
(enum regset_type): New.
(struct regset_info): Add type field. Use new operation types.
(struct linux_target_ops): stop_pc renamed to get_pc.
Add decr_pc_after_break and breakpoint_at.
(get_process, get_thread_proess, get_process_thread)
(strut process_info, all_processes, linux_attach_lwp)
(thread_db_init): New.
* gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc,
arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset)
(i386_store_fpxregset): Constify.
(target_regsets): Add new kind identifier.
(i386_get_pc): Renamed from i386_stop_pc. Simplify.
(i386_set_pc): Add debugging.
(i386_breakpoint_at): New function.
(the_low_target): Add new members.
* gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc)
(mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr)
(mips_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc)
(ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc)
(sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-x86-64-low.c (target_regsets): Add new kind
identifier.
2002-06-11 19:32:40 +02:00
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to the full name of this package. */
|
|
|
|
|
#undef PACKAGE_NAME
|
2002-06-11 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/thread-db.c: New file.
* gdbserver/proc-service.c: New file.
* gdbserver/acinclude.m4: New file.
* gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h,
proc-service.o, and thread-db.o.
(linux-low.o): Add USE_THREAD_DB.
* gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T,
HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN.
* gdbserver/aclocal.m4: Regenerated.
* gdbserver/config.in: Regenerated.
* gdbserver/configure: Regenerated.
* gdbserver/configure.in: Check for proc_service.h, sys/procfs.h,
thread_db.h, and linux/elf.h headrs.
Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and
PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB.
Check for -lthread_db and thread support.
* gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS,
PowerPC, and SuperH.
* gdbserver/i387-fp.c: Constify arguments.
* gdbserver/i387-fp.h: Likewise.
* gdbserver/inferiors.c: (struct thread_info): Renamed from
`struct inferior_info'. Remove PID member. Use generic inferior
list header. All uses updated.
(inferiors, signal_pid): Removed.
(all_threads): New variable.
(get_thread): Define.
(add_inferior_to_list): New function.
(for_each_inferior): New function.
(change_inferior_id): New function.
(add_inferior): Removed.
(remove_inferior): New function.
(add_thread): New function.
(free_one_thread): New function.
(remove_thread): New function.
(clear_inferiors): Use for_each_inferior and free_one_thread.
(find_inferior): New function.
(find_inferior_id): New function.
(inferior_target_data): Update argument type.
(set_inferior_target_data): Likewise.
(inferior_regcache_data): Likewise.
(set_inferior_regcache_data): Likewise.
* gdbserver/linux-low.c (linux_bp_reinsert): Remove.
(all_processes, stopping_threads, using_thrads)
(struct pending_signals, debug_threads, pid_of): New.
(inferior_pid): Replace with macro.
(struct inferior_linux_data): Remove.
(get_stop_pc, add_process): New functions.
(linux_create_inferior): Restore SIGRTMIN+1 before calling exec.
Use add_process and add_thread.
(linux_attach_lwp): New function, based on old linux_attach. Use
add_process and add_thread. Set stop_expected for new threads.
(linux_attach): New function.
(linux_kill_one_process): New function.
(linux_kill): Kill all LWPs.
(linux_thread_alive): Use find_inferior_id.
(check_removed_breakpoints, status_pending_p): New functions.
(linux_wait_for_process): Renamed from linux_wait_for_one_inferior.
Update. Use WNOHANG. Wait for cloned processes also. Update process
struct for the found process.
(linux_wait_for_event): New function.
(linux_wait): Use it. Support LWPs.
(send_sigstop, wait_for_sigstop, stop_all_processes)
(linux_resume_one_process, linux_continue_one_process): New functions.
(linux_resume): Support LWPs.
(REGISTER_RAW_SIZE): Remove.
(fetch_register): Use register_size instead. Call supply_register.
(usr_store_inferior_registers): Likewise. Call collect_register.
Fix recursive case.
(regsets_fetch_inferior_registers): Improve error message.
(regsets_store_inferior_registers): Add debugging.
(linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB.
(unstopped_p, linux_signal_pid): New functions.
(linux_target_ops): Add linux_signal_pid.
(linux_init_signals): New function.
(initialize_low): Call it. Initialize using_threads.
* gdbserver/regcache.c (inferior_regcache_data): Add valid
flag.
(get_regcache): Fetch registers lazily. Add fetch argument
and update all callers.
(regcache_invalidate_one, regcache_invalidate): New
functions.
(new_register_cache): Renamed from create_register_cache.
Return the new regcache.
(free_register_cache): Change argument to a void *.
(registers_to_string, registers_from_string): Call get_regcache
with fetch flag set.
(register_data): Make static. Pass fetch flag to get_regcache.
(supply_register): Call get_regcache with fetch flag clear.
(collect_register): Call get_regcache with fetch flag set.
(collect_register_as_string): New function.
* gdbserver/regcache.h: Update.
* gdbserver/remote-utils.c (putpkt): Flush after debug output and use
stderr.
Handle input interrupts while waiting for an ACK.
(input_interrupt): Use signal_pid method.
(getpkt): Flush after debug output and use stderr.
(outreg): Use collect_register_as_string.
(new_thread_notify, dead_thread_notify): New functions.
(prepare_resume_reply): Check using_threads. Set thread_from_wait
and general_thread.
(look_up_one_symbol): Flush after debug output.
* gdbserver/server.c (step_thread, server_waiting): New variables.
(start_inferior): Don't use signal_pid. Update call to mywait.
(attach_inferior): Update call to mywait.
(handle_query): Handle qfThreadInfo and qsThreadInfo.
(main): Don't fetch/store registers explicitly. Use
set_desired_inferior. Support proposed ``Hs'' packet. Update
calls to mywait.
* gdbserver/server.h: Update.
(struct inferior_list, struct_inferior_list_entry): New.
* gdbserver/target.c (set_desired_inferior): New.
(write_inferior_memory): Constify.
(mywait): New function.
* gdbserver/target.h: Update.
(struct target_ops): New signal_pid method.
(mywait): Removed macro, added prototype.
* gdbserver/linux-low.h (regset_func): Removed.
(regset_fill_func, regset_store_func): New.
(enum regset_type): New.
(struct regset_info): Add type field. Use new operation types.
(struct linux_target_ops): stop_pc renamed to get_pc.
Add decr_pc_after_break and breakpoint_at.
(get_process, get_thread_proess, get_process_thread)
(strut process_info, all_processes, linux_attach_lwp)
(thread_db_init): New.
* gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc,
arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset)
(i386_store_fpxregset): Constify.
(target_regsets): Add new kind identifier.
(i386_get_pc): Renamed from i386_stop_pc. Simplify.
(i386_set_pc): Add debugging.
(i386_breakpoint_at): New function.
(the_low_target): Add new members.
* gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc)
(mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr)
(mips_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc)
(ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc)
(sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-x86-64-low.c (target_regsets): Add new kind
identifier.
2002-06-11 19:32:40 +02:00
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to the full name and version of this package. */
|
|
|
|
|
#undef PACKAGE_STRING
|
2002-06-11 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/thread-db.c: New file.
* gdbserver/proc-service.c: New file.
* gdbserver/acinclude.m4: New file.
* gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h,
proc-service.o, and thread-db.o.
(linux-low.o): Add USE_THREAD_DB.
* gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T,
HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN.
* gdbserver/aclocal.m4: Regenerated.
* gdbserver/config.in: Regenerated.
* gdbserver/configure: Regenerated.
* gdbserver/configure.in: Check for proc_service.h, sys/procfs.h,
thread_db.h, and linux/elf.h headrs.
Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and
PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB.
Check for -lthread_db and thread support.
* gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS,
PowerPC, and SuperH.
* gdbserver/i387-fp.c: Constify arguments.
* gdbserver/i387-fp.h: Likewise.
* gdbserver/inferiors.c: (struct thread_info): Renamed from
`struct inferior_info'. Remove PID member. Use generic inferior
list header. All uses updated.
(inferiors, signal_pid): Removed.
(all_threads): New variable.
(get_thread): Define.
(add_inferior_to_list): New function.
(for_each_inferior): New function.
(change_inferior_id): New function.
(add_inferior): Removed.
(remove_inferior): New function.
(add_thread): New function.
(free_one_thread): New function.
(remove_thread): New function.
(clear_inferiors): Use for_each_inferior and free_one_thread.
(find_inferior): New function.
(find_inferior_id): New function.
(inferior_target_data): Update argument type.
(set_inferior_target_data): Likewise.
(inferior_regcache_data): Likewise.
(set_inferior_regcache_data): Likewise.
* gdbserver/linux-low.c (linux_bp_reinsert): Remove.
(all_processes, stopping_threads, using_thrads)
(struct pending_signals, debug_threads, pid_of): New.
(inferior_pid): Replace with macro.
(struct inferior_linux_data): Remove.
(get_stop_pc, add_process): New functions.
(linux_create_inferior): Restore SIGRTMIN+1 before calling exec.
Use add_process and add_thread.
(linux_attach_lwp): New function, based on old linux_attach. Use
add_process and add_thread. Set stop_expected for new threads.
(linux_attach): New function.
(linux_kill_one_process): New function.
(linux_kill): Kill all LWPs.
(linux_thread_alive): Use find_inferior_id.
(check_removed_breakpoints, status_pending_p): New functions.
(linux_wait_for_process): Renamed from linux_wait_for_one_inferior.
Update. Use WNOHANG. Wait for cloned processes also. Update process
struct for the found process.
(linux_wait_for_event): New function.
(linux_wait): Use it. Support LWPs.
(send_sigstop, wait_for_sigstop, stop_all_processes)
(linux_resume_one_process, linux_continue_one_process): New functions.
(linux_resume): Support LWPs.
(REGISTER_RAW_SIZE): Remove.
(fetch_register): Use register_size instead. Call supply_register.
(usr_store_inferior_registers): Likewise. Call collect_register.
Fix recursive case.
(regsets_fetch_inferior_registers): Improve error message.
(regsets_store_inferior_registers): Add debugging.
(linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB.
(unstopped_p, linux_signal_pid): New functions.
(linux_target_ops): Add linux_signal_pid.
(linux_init_signals): New function.
(initialize_low): Call it. Initialize using_threads.
* gdbserver/regcache.c (inferior_regcache_data): Add valid
flag.
(get_regcache): Fetch registers lazily. Add fetch argument
and update all callers.
(regcache_invalidate_one, regcache_invalidate): New
functions.
(new_register_cache): Renamed from create_register_cache.
Return the new regcache.
(free_register_cache): Change argument to a void *.
(registers_to_string, registers_from_string): Call get_regcache
with fetch flag set.
(register_data): Make static. Pass fetch flag to get_regcache.
(supply_register): Call get_regcache with fetch flag clear.
(collect_register): Call get_regcache with fetch flag set.
(collect_register_as_string): New function.
* gdbserver/regcache.h: Update.
* gdbserver/remote-utils.c (putpkt): Flush after debug output and use
stderr.
Handle input interrupts while waiting for an ACK.
(input_interrupt): Use signal_pid method.
(getpkt): Flush after debug output and use stderr.
(outreg): Use collect_register_as_string.
(new_thread_notify, dead_thread_notify): New functions.
(prepare_resume_reply): Check using_threads. Set thread_from_wait
and general_thread.
(look_up_one_symbol): Flush after debug output.
* gdbserver/server.c (step_thread, server_waiting): New variables.
(start_inferior): Don't use signal_pid. Update call to mywait.
(attach_inferior): Update call to mywait.
(handle_query): Handle qfThreadInfo and qsThreadInfo.
(main): Don't fetch/store registers explicitly. Use
set_desired_inferior. Support proposed ``Hs'' packet. Update
calls to mywait.
* gdbserver/server.h: Update.
(struct inferior_list, struct_inferior_list_entry): New.
* gdbserver/target.c (set_desired_inferior): New.
(write_inferior_memory): Constify.
(mywait): New function.
* gdbserver/target.h: Update.
(struct target_ops): New signal_pid method.
(mywait): Removed macro, added prototype.
* gdbserver/linux-low.h (regset_func): Removed.
(regset_fill_func, regset_store_func): New.
(enum regset_type): New.
(struct regset_info): Add type field. Use new operation types.
(struct linux_target_ops): stop_pc renamed to get_pc.
Add decr_pc_after_break and breakpoint_at.
(get_process, get_thread_proess, get_process_thread)
(strut process_info, all_processes, linux_attach_lwp)
(thread_db_init): New.
* gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc,
arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset)
(i386_store_fpxregset): Constify.
(target_regsets): Add new kind identifier.
(i386_get_pc): Renamed from i386_stop_pc. Simplify.
(i386_set_pc): Add debugging.
(i386_breakpoint_at): New function.
(the_low_target): Add new members.
* gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc)
(mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr)
(mips_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc)
(ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc)
(sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-x86-64-low.c (target_regsets): Add new kind
identifier.
2002-06-11 19:32:40 +02:00
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to the one symbol short name of this package. */
|
|
|
|
|
#undef PACKAGE_TARNAME
|
2002-06-11 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/thread-db.c: New file.
* gdbserver/proc-service.c: New file.
* gdbserver/acinclude.m4: New file.
* gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h,
proc-service.o, and thread-db.o.
(linux-low.o): Add USE_THREAD_DB.
* gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T,
HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN.
* gdbserver/aclocal.m4: Regenerated.
* gdbserver/config.in: Regenerated.
* gdbserver/configure: Regenerated.
* gdbserver/configure.in: Check for proc_service.h, sys/procfs.h,
thread_db.h, and linux/elf.h headrs.
Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and
PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB.
Check for -lthread_db and thread support.
* gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS,
PowerPC, and SuperH.
* gdbserver/i387-fp.c: Constify arguments.
* gdbserver/i387-fp.h: Likewise.
* gdbserver/inferiors.c: (struct thread_info): Renamed from
`struct inferior_info'. Remove PID member. Use generic inferior
list header. All uses updated.
(inferiors, signal_pid): Removed.
(all_threads): New variable.
(get_thread): Define.
(add_inferior_to_list): New function.
(for_each_inferior): New function.
(change_inferior_id): New function.
(add_inferior): Removed.
(remove_inferior): New function.
(add_thread): New function.
(free_one_thread): New function.
(remove_thread): New function.
(clear_inferiors): Use for_each_inferior and free_one_thread.
(find_inferior): New function.
(find_inferior_id): New function.
(inferior_target_data): Update argument type.
(set_inferior_target_data): Likewise.
(inferior_regcache_data): Likewise.
(set_inferior_regcache_data): Likewise.
* gdbserver/linux-low.c (linux_bp_reinsert): Remove.
(all_processes, stopping_threads, using_thrads)
(struct pending_signals, debug_threads, pid_of): New.
(inferior_pid): Replace with macro.
(struct inferior_linux_data): Remove.
(get_stop_pc, add_process): New functions.
(linux_create_inferior): Restore SIGRTMIN+1 before calling exec.
Use add_process and add_thread.
(linux_attach_lwp): New function, based on old linux_attach. Use
add_process and add_thread. Set stop_expected for new threads.
(linux_attach): New function.
(linux_kill_one_process): New function.
(linux_kill): Kill all LWPs.
(linux_thread_alive): Use find_inferior_id.
(check_removed_breakpoints, status_pending_p): New functions.
(linux_wait_for_process): Renamed from linux_wait_for_one_inferior.
Update. Use WNOHANG. Wait for cloned processes also. Update process
struct for the found process.
(linux_wait_for_event): New function.
(linux_wait): Use it. Support LWPs.
(send_sigstop, wait_for_sigstop, stop_all_processes)
(linux_resume_one_process, linux_continue_one_process): New functions.
(linux_resume): Support LWPs.
(REGISTER_RAW_SIZE): Remove.
(fetch_register): Use register_size instead. Call supply_register.
(usr_store_inferior_registers): Likewise. Call collect_register.
Fix recursive case.
(regsets_fetch_inferior_registers): Improve error message.
(regsets_store_inferior_registers): Add debugging.
(linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB.
(unstopped_p, linux_signal_pid): New functions.
(linux_target_ops): Add linux_signal_pid.
(linux_init_signals): New function.
(initialize_low): Call it. Initialize using_threads.
* gdbserver/regcache.c (inferior_regcache_data): Add valid
flag.
(get_regcache): Fetch registers lazily. Add fetch argument
and update all callers.
(regcache_invalidate_one, regcache_invalidate): New
functions.
(new_register_cache): Renamed from create_register_cache.
Return the new regcache.
(free_register_cache): Change argument to a void *.
(registers_to_string, registers_from_string): Call get_regcache
with fetch flag set.
(register_data): Make static. Pass fetch flag to get_regcache.
(supply_register): Call get_regcache with fetch flag clear.
(collect_register): Call get_regcache with fetch flag set.
(collect_register_as_string): New function.
* gdbserver/regcache.h: Update.
* gdbserver/remote-utils.c (putpkt): Flush after debug output and use
stderr.
Handle input interrupts while waiting for an ACK.
(input_interrupt): Use signal_pid method.
(getpkt): Flush after debug output and use stderr.
(outreg): Use collect_register_as_string.
(new_thread_notify, dead_thread_notify): New functions.
(prepare_resume_reply): Check using_threads. Set thread_from_wait
and general_thread.
(look_up_one_symbol): Flush after debug output.
* gdbserver/server.c (step_thread, server_waiting): New variables.
(start_inferior): Don't use signal_pid. Update call to mywait.
(attach_inferior): Update call to mywait.
(handle_query): Handle qfThreadInfo and qsThreadInfo.
(main): Don't fetch/store registers explicitly. Use
set_desired_inferior. Support proposed ``Hs'' packet. Update
calls to mywait.
* gdbserver/server.h: Update.
(struct inferior_list, struct_inferior_list_entry): New.
* gdbserver/target.c (set_desired_inferior): New.
(write_inferior_memory): Constify.
(mywait): New function.
* gdbserver/target.h: Update.
(struct target_ops): New signal_pid method.
(mywait): Removed macro, added prototype.
* gdbserver/linux-low.h (regset_func): Removed.
(regset_fill_func, regset_store_func): New.
(enum regset_type): New.
(struct regset_info): Add type field. Use new operation types.
(struct linux_target_ops): stop_pc renamed to get_pc.
Add decr_pc_after_break and breakpoint_at.
(get_process, get_thread_proess, get_process_thread)
(strut process_info, all_processes, linux_attach_lwp)
(thread_db_init): New.
* gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc,
arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset)
(i386_store_fpxregset): Constify.
(target_regsets): Add new kind identifier.
(i386_get_pc): Renamed from i386_stop_pc. Simplify.
(i386_set_pc): Add debugging.
(i386_breakpoint_at): New function.
(the_low_target): Add new members.
* gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc)
(mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr)
(mips_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc)
(ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc)
(sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-x86-64-low.c (target_regsets): Add new kind
identifier.
2002-06-11 19:32:40 +02:00
|
|
|
|
2009-08-22 18:56:56 +02:00
|
|
|
/* Define to the home page for this package. */
|
|
|
|
|
#undef PACKAGE_URL
|
|
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to the version of this package. */
|
|
|
|
|
#undef PACKAGE_VERSION
|
2002-06-11 Daniel Jacobowitz <drow@mvista.com>
* gdbserver/thread-db.c: New file.
* gdbserver/proc-service.c: New file.
* gdbserver/acinclude.m4: New file.
* gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h,
proc-service.o, and thread-db.o.
(linux-low.o): Add USE_THREAD_DB.
* gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T,
HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN.
* gdbserver/aclocal.m4: Regenerated.
* gdbserver/config.in: Regenerated.
* gdbserver/configure: Regenerated.
* gdbserver/configure.in: Check for proc_service.h, sys/procfs.h,
thread_db.h, and linux/elf.h headrs.
Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and
PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB.
Check for -lthread_db and thread support.
* gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS,
PowerPC, and SuperH.
* gdbserver/i387-fp.c: Constify arguments.
* gdbserver/i387-fp.h: Likewise.
* gdbserver/inferiors.c: (struct thread_info): Renamed from
`struct inferior_info'. Remove PID member. Use generic inferior
list header. All uses updated.
(inferiors, signal_pid): Removed.
(all_threads): New variable.
(get_thread): Define.
(add_inferior_to_list): New function.
(for_each_inferior): New function.
(change_inferior_id): New function.
(add_inferior): Removed.
(remove_inferior): New function.
(add_thread): New function.
(free_one_thread): New function.
(remove_thread): New function.
(clear_inferiors): Use for_each_inferior and free_one_thread.
(find_inferior): New function.
(find_inferior_id): New function.
(inferior_target_data): Update argument type.
(set_inferior_target_data): Likewise.
(inferior_regcache_data): Likewise.
(set_inferior_regcache_data): Likewise.
* gdbserver/linux-low.c (linux_bp_reinsert): Remove.
(all_processes, stopping_threads, using_thrads)
(struct pending_signals, debug_threads, pid_of): New.
(inferior_pid): Replace with macro.
(struct inferior_linux_data): Remove.
(get_stop_pc, add_process): New functions.
(linux_create_inferior): Restore SIGRTMIN+1 before calling exec.
Use add_process and add_thread.
(linux_attach_lwp): New function, based on old linux_attach. Use
add_process and add_thread. Set stop_expected for new threads.
(linux_attach): New function.
(linux_kill_one_process): New function.
(linux_kill): Kill all LWPs.
(linux_thread_alive): Use find_inferior_id.
(check_removed_breakpoints, status_pending_p): New functions.
(linux_wait_for_process): Renamed from linux_wait_for_one_inferior.
Update. Use WNOHANG. Wait for cloned processes also. Update process
struct for the found process.
(linux_wait_for_event): New function.
(linux_wait): Use it. Support LWPs.
(send_sigstop, wait_for_sigstop, stop_all_processes)
(linux_resume_one_process, linux_continue_one_process): New functions.
(linux_resume): Support LWPs.
(REGISTER_RAW_SIZE): Remove.
(fetch_register): Use register_size instead. Call supply_register.
(usr_store_inferior_registers): Likewise. Call collect_register.
Fix recursive case.
(regsets_fetch_inferior_registers): Improve error message.
(regsets_store_inferior_registers): Add debugging.
(linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB.
(unstopped_p, linux_signal_pid): New functions.
(linux_target_ops): Add linux_signal_pid.
(linux_init_signals): New function.
(initialize_low): Call it. Initialize using_threads.
* gdbserver/regcache.c (inferior_regcache_data): Add valid
flag.
(get_regcache): Fetch registers lazily. Add fetch argument
and update all callers.
(regcache_invalidate_one, regcache_invalidate): New
functions.
(new_register_cache): Renamed from create_register_cache.
Return the new regcache.
(free_register_cache): Change argument to a void *.
(registers_to_string, registers_from_string): Call get_regcache
with fetch flag set.
(register_data): Make static. Pass fetch flag to get_regcache.
(supply_register): Call get_regcache with fetch flag clear.
(collect_register): Call get_regcache with fetch flag set.
(collect_register_as_string): New function.
* gdbserver/regcache.h: Update.
* gdbserver/remote-utils.c (putpkt): Flush after debug output and use
stderr.
Handle input interrupts while waiting for an ACK.
(input_interrupt): Use signal_pid method.
(getpkt): Flush after debug output and use stderr.
(outreg): Use collect_register_as_string.
(new_thread_notify, dead_thread_notify): New functions.
(prepare_resume_reply): Check using_threads. Set thread_from_wait
and general_thread.
(look_up_one_symbol): Flush after debug output.
* gdbserver/server.c (step_thread, server_waiting): New variables.
(start_inferior): Don't use signal_pid. Update call to mywait.
(attach_inferior): Update call to mywait.
(handle_query): Handle qfThreadInfo and qsThreadInfo.
(main): Don't fetch/store registers explicitly. Use
set_desired_inferior. Support proposed ``Hs'' packet. Update
calls to mywait.
* gdbserver/server.h: Update.
(struct inferior_list, struct_inferior_list_entry): New.
* gdbserver/target.c (set_desired_inferior): New.
(write_inferior_memory): Constify.
(mywait): New function.
* gdbserver/target.h: Update.
(struct target_ops): New signal_pid method.
(mywait): Removed macro, added prototype.
* gdbserver/linux-low.h (regset_func): Removed.
(regset_fill_func, regset_store_func): New.
(enum regset_type): New.
(struct regset_info): Add type field. Use new operation types.
(struct linux_target_ops): stop_pc renamed to get_pc.
Add decr_pc_after_break and breakpoint_at.
(get_process, get_thread_proess, get_process_thread)
(strut process_info, all_processes, linux_attach_lwp)
(thread_db_init): New.
* gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc,
arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset)
(i386_store_fpxregset): Constify.
(target_regsets): Add new kind identifier.
(i386_get_pc): Renamed from i386_stop_pc. Simplify.
(i386_set_pc): Add debugging.
(i386_breakpoint_at): New function.
(the_low_target): Add new members.
* gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc)
(mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr)
(mips_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc)
(ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc)
(sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New.
(the_low_target): Add new members.
* gdbserver/linux-x86-64-low.c (target_regsets): Add new kind
identifier.
2002-06-11 19:32:40 +02:00
|
|
|
|
2008-06-06 00:36:57 +02:00
|
|
|
/* Additional package description */
|
|
|
|
|
#undef PKGVERSION
|
|
|
|
|
|
C++: handle glibc's ptrace(enum __ptrace_request, ...)
Building in C++ mode issues ~40 warnings like this:
../../src/gdb/linux-nat.c: In function ‘int linux_handle_extended_wait(lwp_info*, int, int)’:
../../src/gdb/linux-nat.c:2016:51: warning: invalid conversion from ‘int’ to ‘__ptrace_request’ [-fpermissive]
ptrace (PTRACE_GETEVENTMSG, pid, 0, &new_pid);
The issue is that in glibc, ptrace's first parameter is an enum.
That's not a problem if we pick the PTRACE_XXX requests from
sys/ptrace.h, as those will be values of the corresponding enum.
However, we have fallback definitions for PTRACE_XXX symbols when the
system headers miss them (such as PTRACE_GETEVENTMSG above), and those
are plain integer constants. E.g., nat/linux-ptrace.h:
#define PTRACE_GETEVENTMSG 0x4201
One idea would be to fix this by defining those fallbacks like:
-#define PTRACE_GETEVENTMSG 0x4201
+#define PTRACE_GETEVENTMSG ((enum __ptrace_request) 0x4201)
However, while glibc's ptrace uses enum __ptrace_request for first
parameter:
extern long int ptrace (enum __ptrace_request __request, ...) __THROW;
other libc's, like e.g., Android's bionic do not -- in that case, the
first parameter is int:
long ptrace(int request, pid_t pid, void * addr, void * data);
So the fix I came up is to make configure/ptrace.m4 also detect the
type of the ptrace's first parameter and defin PTRACE_TYPE_ARG1, as
already does the for parameters 3-4, and then simply wrap ptrace with
a macro that casts the first argument to the detected type. (I'm
leaving adding a nicer wrapper for when we drop building in C).
While this adds the wrapper, GNU/Linux files won't use it until the
next patch, which makes all native GNU/Linux files include
gdb_ptrace.h.
gdb/ChangeLog:
2015-07-24 Pedro Alves <palves@redhat.com>
* ptrace.m4 (ptrace tests): Test in C++ mode. Try with 'enum
__ptrace_request as first parameter type instead of int.
(PTRACE_TYPE_ARG1): Define.
* nat/gdb_ptrace.h [!PTRACE_TYPE_ARG5] (ptrace): Define as wrapper
that casts first argument to PTRACE_TYPE_ARG1.
* config.in: Regenerate.
* configure: Regenerate.
gdb/gdbserver/ChangeLog:
2015-07-24 Pedro Alves <palves@redhat.com>
* config.in: Regenerate.
* configure: Regenerate.
2015-07-24 15:57:20 +02:00
|
|
|
/* Define to the type of arg 1 for ptrace. */
|
|
|
|
|
#undef PTRACE_TYPE_ARG1
|
|
|
|
|
|
2015-07-24 15:57:19 +02:00
|
|
|
/* Define to the type of arg 3 for ptrace. */
|
|
|
|
|
#undef PTRACE_TYPE_ARG3
|
|
|
|
|
|
|
|
|
|
/* Define to the type of arg 4 for ptrace. */
|
|
|
|
|
#undef PTRACE_TYPE_ARG4
|
|
|
|
|
|
|
|
|
|
/* Define to the type of arg 5 for ptrace. */
|
|
|
|
|
#undef PTRACE_TYPE_ARG5
|
|
|
|
|
|
|
|
|
|
/* Define as the return type of ptrace. */
|
|
|
|
|
#undef PTRACE_TYPE_RET
|
|
|
|
|
|
2008-06-06 00:36:57 +02:00
|
|
|
/* Bug reporting address */
|
|
|
|
|
#undef REPORT_BUGS_TO
|
|
|
|
|
|
Create libiberty.m4, have GDB and GDBserver use it
Converting GDB to be a C++ program, I stumbled on 'basename' issues,
like:
src/gdb/../include/ansidecl.h:169:64: error: new declaration ‘char* basename(const char*)’
/usr/include/string.h:597:26: error: ambiguates old declaration ‘const char* basename(const char*)’
which I believe led to this bit in gold's configure.ac:
dnl We have to check these in C, not C++, because autoconf generates
dnl tests which have no type information, and current glibc provides
dnl multiple declarations of functions like basename when compiling
dnl with C++.
AC_CHECK_DECLS([basename, ffs, asprintf, vasprintf, snprintf, vsnprintf, strverscmp])
These checks IIUC intend to generate all the HAVE_DECL_FOO symbols
that libiberty.h and ansidecl.h check.
GDB is missing these checks currently, which results in the conflict
shown above.
This adds an m4 file that both GDB and GDBserver's configury use to
pull in the autoconf checks that libiberty clients needs done in order
to use these libiberty.h/ansidecl.h.
gdb/ChangeLog:
2015-02-27 Pedro Alves <palves@redhat.com>
* libiberty.m4: New file.
* acinclude.m4: Include libiberty.m4.
* configure.ac: Call libiberty_INIT.
* config.in, configure: Regenerate.
gdb/gdbserver/
2015-02-27 Pedro Alves <palves@redhat.com>
* acinclude.m4: Include libiberty.m4.
* configure.ac: Call libiberty_INIT.
* config.in, configure: Regenerate.
2015-02-27 16:52:02 +01:00
|
|
|
/* The size of `long long', as computed by sizeof. */
|
|
|
|
|
#undef SIZEOF_LONG_LONG
|
|
|
|
|
|
2010-09-01 03:51:07 +02:00
|
|
|
/* If using the C implementation of alloca, define if you know the
|
|
|
|
|
direction of stack growth for your system; otherwise it will be
|
|
|
|
|
automatically deduced at runtime.
|
|
|
|
|
STACK_DIRECTION > 0 => grows toward higher addresses
|
|
|
|
|
STACK_DIRECTION < 0 => grows toward lower addresses
|
|
|
|
|
STACK_DIRECTION = 0 => direction of growth unknown */
|
|
|
|
|
#undef STACK_DIRECTION
|
|
|
|
|
|
* acconfig.h: Remove.
* configure.ac: Add a test for socklen_t. Use three-argument
AC_DEFINE throughout.
* config.in: Regenerated using autoheader 2.59.
* configure: Regenerated.
* gdbreplay.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
* remote-utils.c (socklen_t): Provide a default.
(remote_open): Use socklen_t.
(convert_int_to_ascii, convert_ascii_to_int, decode_M_packet): Use
unsigned char.
* i387-fp.c (struct i387_fsave, struct i387_fxsave): Use unsigned
char for buffers.
* linux-low.c (linux_read_memory, linux_write_memory)
(linux_read_auxv): Likewise.
* mem-break.c (breakpoint_data, set_breakpoint_data, check_mem_read)
(check_mem_write): Likewise.
* mem-break.h (set_breakpoint_data, check_mem_read, check_mem_write):
Likewise.
* regcache.c (struct inferior_rgcache_data, registers_to_string)
(registers_from_string, register_data): Likewise.
* server.c (handle_query, main): Likewise.
* server.h (convert_ascii_to_int, convert_int_to_ascii)
(decode_M_packet): Likewise.
* target.c (read_inferior_memory, write_inferior_memory): Likewise.
* target.h (struct target_ops): Update read_memory, write_memory,
and read_auxv.
(read_inferior_memory, write_inferior_memory): Update.
* linux-low.h (struct linux_target_ops): Change type of breakpoint
to unsigned char *.
* linux-arm-low.c, linux-cris-low.c, linux-crisv32-low.c,
linux-i386-low.c, linux-m32r-low.c, linux-m68k-low.c,
linux-mips-low.c, linux-ppc-low.c, linux-ppc64-low.c,
linux-s390-low.c, linux-sh-low.c: Update for changes in
read_inferior_memory and the_low_target->breakpoint.
2005-06-13 03:59:22 +02:00
|
|
|
/* Define to 1 if you have the ANSI C header files. */
|
|
|
|
|
#undef STDC_HEADERS
|
2006-07-23 05:52:15 +02:00
|
|
|
|
2009-10-29 18:43:44 +01:00
|
|
|
/* Define if we should use libthread_db directly. */
|
|
|
|
|
#undef USE_LIBTHREAD_DB_DIRECTLY
|
|
|
|
|
|
2009-08-22 18:56:56 +02:00
|
|
|
/* Enable extensions on AIX 3, Interix. */
|
|
|
|
|
#ifndef _ALL_SOURCE
|
|
|
|
|
# undef _ALL_SOURCE
|
|
|
|
|
#endif
|
|
|
|
|
/* Enable GNU extensions on systems that have them. */
|
|
|
|
|
#ifndef _GNU_SOURCE
|
|
|
|
|
# undef _GNU_SOURCE
|
|
|
|
|
#endif
|
|
|
|
|
/* Enable threading extensions on Solaris. */
|
|
|
|
|
#ifndef _POSIX_PTHREAD_SEMANTICS
|
|
|
|
|
# undef _POSIX_PTHREAD_SEMANTICS
|
|
|
|
|
#endif
|
|
|
|
|
/* Enable extensions on HP NonStop. */
|
|
|
|
|
#ifndef _TANDEM_SOURCE
|
|
|
|
|
# undef _TANDEM_SOURCE
|
|
|
|
|
#endif
|
|
|
|
|
/* Enable general extensions on Solaris. */
|
|
|
|
|
#ifndef __EXTENSIONS__
|
|
|
|
|
# undef __EXTENSIONS__
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
|
2013-04-17 11:58:15 +02:00
|
|
|
/* Define if we should use libthread_db. */
|
|
|
|
|
#undef USE_THREAD_DB
|
|
|
|
|
|
2012-04-19 Pedro Alves <palves@redhat.com>
gdb/
* Makefile.in (GNULIB_BUILDDIR): New.
(LIBGNU, INCGNU, GNULIB_H): Adjust.
(SUBDIRS): Add $(GNULIB_BUILDDIR).
(CLEANDIRS). Remove gnulib/import.
(REQUIRED_SUBDIRS): Replace gnulib/import with $(GNULIB_BUILDDIR).
(all-lib): Ditto.
(distclean): Remove the $(GNULIB_BUILDDIR) directory.
(gnulib/import/Makefile): Replace gnulib/import with
$(GNULIB_BUILDDIR). Set CONFIG_FILES to just Makefile.
(ACLOCAL_AMFLAGS): Remove '-I gnulib/import/m4'.
(aclocal_m4_deps): Remove the gnulib dependencies. Add
acx_configure_dir.m4.
* acinclude.m4: Include acx_configure_dir.m4.
* acx_configure_dir.m4: New file.
* aclocal.m4: Regenerate.
* configure.ac: Remove gl_EARLY, gl_INIT and AM_INIT_AUTOMAKE
calls. Configure gnulib using ACX_CONFIGURE_DIR.
(GNULIB): New variable.
(GNULIB_STDINT_H): Adjust.
(AC_OUTPUT): Don't output gnulib/Makefile.
* gdb/defs.h: Include build-gnulib/config.h.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* gnulib/Makefile.in: New file.
* gnulib/configure.ac: New file.
* gnulib/aclocal.m4: New file.
* gnulib/config.in: New file.
* gnulib/configure: New file.
* gnulib/: Re-run gnulib-tool to adjust.
gdb/gdbserver/
* Makefile.in (GNULIB_BUILDDIR): New.
(LIBGNU, INCGNU, GNULIB_H): Adjust.
(SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): New.
(all, install-only, uninstall, clean-info, all-lib, clean): No
longer pass GNULIB_FLAGS_TO_PASS. Use subdir_do.
(maintainer-clean realclean distclean): Use subdir_do.
(subdir_do): New.
(gnulib/import/Makefile): Adjust. Replace gnulib/import with
$(GNULIB_BUILDDIR). Don't pass argument to config.status.
* acinclude.m4: Include acx_configure_dir.m4.
* configure.ac: Remove gl_EARLY, gl_INIT, and AM_INIT_AUTOMAKE
calls. Call AC_PROG_RANLIB. Configure gnulib using
ACX_CONFIGURE_DIR.
(GNULIB): New.
(GNULIB_STDINT_H): Adjust.
(AC_OUTPUT): Don't output gnulib/Makefile anymore.
* gdbreplay.c: Include build-gnulib/config.h.
* server.h: Likewise.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
2012-04-19 21:34:52 +02:00
|
|
|
/* Define if we should use the Windows API, instead of the POSIX API. On
|
|
|
|
|
Windows, we use the Windows API when building for MinGW, but the POSIX API
|
|
|
|
|
when building for Cygwin. */
|
|
|
|
|
#undef USE_WIN32API
|
2012-04-14 07:24:57 +02:00
|
|
|
|
2012-04-19 Pedro Alves <palves@redhat.com>
gdb/
* Makefile.in (GNULIB_BUILDDIR): New.
(LIBGNU, INCGNU, GNULIB_H): Adjust.
(SUBDIRS): Add $(GNULIB_BUILDDIR).
(CLEANDIRS). Remove gnulib/import.
(REQUIRED_SUBDIRS): Replace gnulib/import with $(GNULIB_BUILDDIR).
(all-lib): Ditto.
(distclean): Remove the $(GNULIB_BUILDDIR) directory.
(gnulib/import/Makefile): Replace gnulib/import with
$(GNULIB_BUILDDIR). Set CONFIG_FILES to just Makefile.
(ACLOCAL_AMFLAGS): Remove '-I gnulib/import/m4'.
(aclocal_m4_deps): Remove the gnulib dependencies. Add
acx_configure_dir.m4.
* acinclude.m4: Include acx_configure_dir.m4.
* acx_configure_dir.m4: New file.
* aclocal.m4: Regenerate.
* configure.ac: Remove gl_EARLY, gl_INIT and AM_INIT_AUTOMAKE
calls. Configure gnulib using ACX_CONFIGURE_DIR.
(GNULIB): New variable.
(GNULIB_STDINT_H): Adjust.
(AC_OUTPUT): Don't output gnulib/Makefile.
* gdb/defs.h: Include build-gnulib/config.h.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* gnulib/Makefile.in: New file.
* gnulib/configure.ac: New file.
* gnulib/aclocal.m4: New file.
* gnulib/config.in: New file.
* gnulib/configure: New file.
* gnulib/: Re-run gnulib-tool to adjust.
gdb/gdbserver/
* Makefile.in (GNULIB_BUILDDIR): New.
(LIBGNU, INCGNU, GNULIB_H): Adjust.
(SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): New.
(all, install-only, uninstall, clean-info, all-lib, clean): No
longer pass GNULIB_FLAGS_TO_PASS. Use subdir_do.
(maintainer-clean realclean distclean): Use subdir_do.
(subdir_do): New.
(gnulib/import/Makefile): Adjust. Replace gnulib/import with
$(GNULIB_BUILDDIR). Don't pass argument to config.status.
* acinclude.m4: Include acx_configure_dir.m4.
* configure.ac: Remove gl_EARLY, gl_INIT, and AM_INIT_AUTOMAKE
calls. Call AC_PROG_RANLIB. Configure gnulib using
ACX_CONFIGURE_DIR.
(GNULIB): New.
(GNULIB_STDINT_H): Adjust.
(AC_OUTPUT): Don't output gnulib/Makefile anymore.
* gdbreplay.c: Include build-gnulib/config.h.
* server.h: Likewise.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
2012-04-19 21:34:52 +02:00
|
|
|
/* Define if an XML target description is available. */
|
|
|
|
|
#undef USE_XML
|
2007-09-19 16:41:50 +02:00
|
|
|
|
2013-02-28 17:51:19 +01:00
|
|
|
/* Number of bits in a file offset, on hosts where this is settable. */
|
|
|
|
|
#undef _FILE_OFFSET_BITS
|
|
|
|
|
|
|
|
|
|
/* Define for large files, on AIX-style hosts. */
|
|
|
|
|
#undef _LARGE_FILES
|
|
|
|
|
|
2012-04-19 Pedro Alves <palves@redhat.com>
gdb/
* Makefile.in (GNULIB_BUILDDIR): New.
(LIBGNU, INCGNU, GNULIB_H): Adjust.
(SUBDIRS): Add $(GNULIB_BUILDDIR).
(CLEANDIRS). Remove gnulib/import.
(REQUIRED_SUBDIRS): Replace gnulib/import with $(GNULIB_BUILDDIR).
(all-lib): Ditto.
(distclean): Remove the $(GNULIB_BUILDDIR) directory.
(gnulib/import/Makefile): Replace gnulib/import with
$(GNULIB_BUILDDIR). Set CONFIG_FILES to just Makefile.
(ACLOCAL_AMFLAGS): Remove '-I gnulib/import/m4'.
(aclocal_m4_deps): Remove the gnulib dependencies. Add
acx_configure_dir.m4.
* acinclude.m4: Include acx_configure_dir.m4.
* acx_configure_dir.m4: New file.
* aclocal.m4: Regenerate.
* configure.ac: Remove gl_EARLY, gl_INIT and AM_INIT_AUTOMAKE
calls. Configure gnulib using ACX_CONFIGURE_DIR.
(GNULIB): New variable.
(GNULIB_STDINT_H): Adjust.
(AC_OUTPUT): Don't output gnulib/Makefile.
* gdb/defs.h: Include build-gnulib/config.h.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* gnulib/Makefile.in: New file.
* gnulib/configure.ac: New file.
* gnulib/aclocal.m4: New file.
* gnulib/config.in: New file.
* gnulib/configure: New file.
* gnulib/: Re-run gnulib-tool to adjust.
gdb/gdbserver/
* Makefile.in (GNULIB_BUILDDIR): New.
(LIBGNU, INCGNU, GNULIB_H): Adjust.
(SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): New.
(all, install-only, uninstall, clean-info, all-lib, clean): No
longer pass GNULIB_FLAGS_TO_PASS. Use subdir_do.
(maintainer-clean realclean distclean): Use subdir_do.
(subdir_do): New.
(gnulib/import/Makefile): Adjust. Replace gnulib/import with
$(GNULIB_BUILDDIR). Don't pass argument to config.status.
* acinclude.m4: Include acx_configure_dir.m4.
* configure.ac: Remove gl_EARLY, gl_INIT, and AM_INIT_AUTOMAKE
calls. Call AC_PROG_RANLIB. Configure gnulib using
ACX_CONFIGURE_DIR.
(GNULIB): New.
(GNULIB_STDINT_H): Adjust.
(AC_OUTPUT): Don't output gnulib/Makefile anymore.
* gdbreplay.c: Include build-gnulib/config.h.
* server.h: Likewise.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
2012-04-19 21:34:52 +02:00
|
|
|
/* Define to 1 if on MINIX. */
|
|
|
|
|
#undef _MINIX
|
2009-08-22 18:56:56 +02:00
|
|
|
|
2012-04-19 Pedro Alves <palves@redhat.com>
gdb/
* Makefile.in (GNULIB_BUILDDIR): New.
(LIBGNU, INCGNU, GNULIB_H): Adjust.
(SUBDIRS): Add $(GNULIB_BUILDDIR).
(CLEANDIRS). Remove gnulib/import.
(REQUIRED_SUBDIRS): Replace gnulib/import with $(GNULIB_BUILDDIR).
(all-lib): Ditto.
(distclean): Remove the $(GNULIB_BUILDDIR) directory.
(gnulib/import/Makefile): Replace gnulib/import with
$(GNULIB_BUILDDIR). Set CONFIG_FILES to just Makefile.
(ACLOCAL_AMFLAGS): Remove '-I gnulib/import/m4'.
(aclocal_m4_deps): Remove the gnulib dependencies. Add
acx_configure_dir.m4.
* acinclude.m4: Include acx_configure_dir.m4.
* acx_configure_dir.m4: New file.
* aclocal.m4: Regenerate.
* configure.ac: Remove gl_EARLY, gl_INIT and AM_INIT_AUTOMAKE
calls. Configure gnulib using ACX_CONFIGURE_DIR.
(GNULIB): New variable.
(GNULIB_STDINT_H): Adjust.
(AC_OUTPUT): Don't output gnulib/Makefile.
* gdb/defs.h: Include build-gnulib/config.h.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* gnulib/Makefile.in: New file.
* gnulib/configure.ac: New file.
* gnulib/aclocal.m4: New file.
* gnulib/config.in: New file.
* gnulib/configure: New file.
* gnulib/: Re-run gnulib-tool to adjust.
gdb/gdbserver/
* Makefile.in (GNULIB_BUILDDIR): New.
(LIBGNU, INCGNU, GNULIB_H): Adjust.
(SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): New.
(all, install-only, uninstall, clean-info, all-lib, clean): No
longer pass GNULIB_FLAGS_TO_PASS. Use subdir_do.
(maintainer-clean realclean distclean): Use subdir_do.
(subdir_do): New.
(gnulib/import/Makefile): Adjust. Replace gnulib/import with
$(GNULIB_BUILDDIR). Don't pass argument to config.status.
* acinclude.m4: Include acx_configure_dir.m4.
* configure.ac: Remove gl_EARLY, gl_INIT, and AM_INIT_AUTOMAKE
calls. Call AC_PROG_RANLIB. Configure gnulib using
ACX_CONFIGURE_DIR.
(GNULIB): New.
(GNULIB_STDINT_H): Adjust.
(AC_OUTPUT): Don't output gnulib/Makefile anymore.
* gdbreplay.c: Include build-gnulib/config.h.
* server.h: Likewise.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
2012-04-19 21:34:52 +02:00
|
|
|
/* Define to 2 if the system does not provide POSIX.1 features except with
|
|
|
|
|
this defined. */
|
|
|
|
|
#undef _POSIX_1_SOURCE
|
2009-08-22 18:56:56 +02:00
|
|
|
|
2012-04-19 Pedro Alves <palves@redhat.com>
gdb/
* Makefile.in (GNULIB_BUILDDIR): New.
(LIBGNU, INCGNU, GNULIB_H): Adjust.
(SUBDIRS): Add $(GNULIB_BUILDDIR).
(CLEANDIRS). Remove gnulib/import.
(REQUIRED_SUBDIRS): Replace gnulib/import with $(GNULIB_BUILDDIR).
(all-lib): Ditto.
(distclean): Remove the $(GNULIB_BUILDDIR) directory.
(gnulib/import/Makefile): Replace gnulib/import with
$(GNULIB_BUILDDIR). Set CONFIG_FILES to just Makefile.
(ACLOCAL_AMFLAGS): Remove '-I gnulib/import/m4'.
(aclocal_m4_deps): Remove the gnulib dependencies. Add
acx_configure_dir.m4.
* acinclude.m4: Include acx_configure_dir.m4.
* acx_configure_dir.m4: New file.
* aclocal.m4: Regenerate.
* configure.ac: Remove gl_EARLY, gl_INIT and AM_INIT_AUTOMAKE
calls. Configure gnulib using ACX_CONFIGURE_DIR.
(GNULIB): New variable.
(GNULIB_STDINT_H): Adjust.
(AC_OUTPUT): Don't output gnulib/Makefile.
* gdb/defs.h: Include build-gnulib/config.h.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* gnulib/Makefile.in: New file.
* gnulib/configure.ac: New file.
* gnulib/aclocal.m4: New file.
* gnulib/config.in: New file.
* gnulib/configure: New file.
* gnulib/: Re-run gnulib-tool to adjust.
gdb/gdbserver/
* Makefile.in (GNULIB_BUILDDIR): New.
(LIBGNU, INCGNU, GNULIB_H): Adjust.
(SUBDIRS, CLEANDIRS, REQUIRED_SUBDIRS): New.
(all, install-only, uninstall, clean-info, all-lib, clean): No
longer pass GNULIB_FLAGS_TO_PASS. Use subdir_do.
(maintainer-clean realclean distclean): Use subdir_do.
(subdir_do): New.
(gnulib/import/Makefile): Adjust. Replace gnulib/import with
$(GNULIB_BUILDDIR). Don't pass argument to config.status.
* acinclude.m4: Include acx_configure_dir.m4.
* configure.ac: Remove gl_EARLY, gl_INIT, and AM_INIT_AUTOMAKE
calls. Call AC_PROG_RANLIB. Configure gnulib using
ACX_CONFIGURE_DIR.
(GNULIB): New.
(GNULIB_STDINT_H): Adjust.
(AC_OUTPUT): Don't output gnulib/Makefile anymore.
* gdbreplay.c: Include build-gnulib/config.h.
* server.h: Likewise.
* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
2012-04-19 21:34:52 +02:00
|
|
|
/* Define to 1 if you need to in order for `stat' and other things to work. */
|
|
|
|
|
#undef _POSIX_SOURCE
|
2016-01-18 10:45:10 +01:00
|
|
|
|
|
|
|
|
/* Define to `int' if <sys/types.h> does not define. */
|
|
|
|
|
#undef pid_t
|
|
|
|
|
|
|
|
|
|
/* Define as `fork' if `vfork' does not work. */
|
|
|
|
|
#undef vfork
|