binutils-gdb/gdb/build-id.c

163 lines
4.2 KiB
C
Raw Normal View History

fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
/* build-id-related functions.
Copyright (C) 1991-2017 Free Software Foundation, Inc.
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "bfd.h"
#include "gdb_bfd.h"
#include "build-id.h"
#include "gdb_vecs.h"
#include "symfile.h"
#include "objfiles.h"
#include "filenames.h"
Convert "remote:" sysroots to "target:" and remove "remote:" The functionality of "target:" sysroots is a superset of the functionality of "remote:" sysroots. This commit causes the "set sysroot" command to rewrite "remote:" sysroots as "target:" sysroots and replaces "remote:" specific code with "target:" specific code where still necessary. gdb/ChangeLog: * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition. (remote_filename_p): Remove declaration. (remote_bfd_open): Likewise. * remote.c (remote_bfd_iovec_open): Remove function. (remote_bfd_iovec_close): Likewise. (remote_bfd_iovec_pread): Likewise. (remote_bfd_iovec_stat): Likewise. (remote_filename_p): Likewise. (remote_bfd_open): Likewise. * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration. * symfile.c (separate_debug_file_exists): Use gdb_bfd_open. (gdb_bfd_open_maybe_remote): Remove function. (symfile_bfd_open): Replace remote filename check with target filename check. (reread_symbols): Use gdb_bfd_open. * build-id.c (gdbcore.h): New include. (build_id_to_debug_bfd): Use gdb_bfd_open. * infcmd.c (attach_command_post_wait): Remove remote filename check. * solib.c (solib_find): Replace remote-specific handling with target-specific handling. Update comments where necessary. (solib_bfd_open): Replace remote-specific handling with target-specific handling. (gdb_sysroot_changed): New function. (_initialize_solib): Call the above when gdb_sysroot changes. * windows-tdep.c (gdbcore.h): New include. (windows_xfer_shared_library): Use gdb_bfd_open.
2015-04-02 14:38:29 +02:00
#include "gdbcore.h"
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
/* See build-id.h. */
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
Allow gdb to find debug symbols file by build-id for PE file format also This promotes BFD's struct elf_build_id to the generic struct bfd_build_id, populated when an ELF or PE BFD is read. gdb is updated to use that, and to use the build-id to find symbols for PE files also. There is currently no generic way to extract the build-id from an object file, perhaps an option to objdump to do this might make sense? On x86_64-pc-cygwin, gdb's sepdebug.exp changes: -# of unsupported tests 1 +# of expected passes 90 I don't seem to get consistent testsuite runs on i686-linux-gnu, but there don't appear to be any regressions. bfd/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * elf-bfd.h : Remove struct elf_build_id. * bfd.c : Add struct bfd_build_id. * bfd-in2.h: Regenerate. * elf.c (elfobj_grok_gnu_build_id): Update to use bfd_build_id. * libpei.h: Add protoype and macros for bfd_XXi_slurp_codeview_record. * peXXigen.c (_bfd_XXi_slurp_codeview_record): Make public * peicode.h (pe_bfd_read_buildid): Add. (pe_bfd_object_p): Use pe_bfd_read_buildid(). gdb/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * build-id.c: Don't include elf-bfd.h. (build_id_bfd_get): Use bfd_build_id. (build_id_verify): Ditto. * build-id.h: Ditto. (find_separate_debug_file_by_buildid): Ditto. * python/py-objfile.c: Don't include elf-bfd.h. (objfpy_get_build_id) Use bfd_build_id. (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto. * coffread.c: Include build-id.h. (coff_symfile_read): Try find_separate_debug_file_by_buildid. gdb/doc/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.texinfo (Separate Debug Files): Document that PE is also supported. gdb/testsuite/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.base/sepdebug.exp: Add EXEEXT where needed. * lib/gdb.exp (get_build_id): Teach how to extract build-id from a PE file. * lib/future.exp (gdb_find_objdump): Add gdb_find_objdump. Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
2015-04-07 21:49:08 +02:00
const struct bfd_build_id *
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
build_id_bfd_get (bfd *abfd)
{
Allow gdb to find debug symbols file by build-id for PE file format also This promotes BFD's struct elf_build_id to the generic struct bfd_build_id, populated when an ELF or PE BFD is read. gdb is updated to use that, and to use the build-id to find symbols for PE files also. There is currently no generic way to extract the build-id from an object file, perhaps an option to objdump to do this might make sense? On x86_64-pc-cygwin, gdb's sepdebug.exp changes: -# of unsupported tests 1 +# of expected passes 90 I don't seem to get consistent testsuite runs on i686-linux-gnu, but there don't appear to be any regressions. bfd/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * elf-bfd.h : Remove struct elf_build_id. * bfd.c : Add struct bfd_build_id. * bfd-in2.h: Regenerate. * elf.c (elfobj_grok_gnu_build_id): Update to use bfd_build_id. * libpei.h: Add protoype and macros for bfd_XXi_slurp_codeview_record. * peXXigen.c (_bfd_XXi_slurp_codeview_record): Make public * peicode.h (pe_bfd_read_buildid): Add. (pe_bfd_object_p): Use pe_bfd_read_buildid(). gdb/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * build-id.c: Don't include elf-bfd.h. (build_id_bfd_get): Use bfd_build_id. (build_id_verify): Ditto. * build-id.h: Ditto. (find_separate_debug_file_by_buildid): Ditto. * python/py-objfile.c: Don't include elf-bfd.h. (objfpy_get_build_id) Use bfd_build_id. (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto. * coffread.c: Include build-id.h. (coff_symfile_read): Try find_separate_debug_file_by_buildid. gdb/doc/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.texinfo (Separate Debug Files): Document that PE is also supported. gdb/testsuite/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.base/sepdebug.exp: Add EXEEXT where needed. * lib/gdb.exp (get_build_id): Teach how to extract build-id from a PE file. * lib/future.exp (gdb_find_objdump): Add gdb_find_objdump. Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
2015-04-07 21:49:08 +02:00
if (!bfd_check_format (abfd, bfd_object))
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
return NULL;
Allow gdb to find debug symbols file by build-id for PE file format also This promotes BFD's struct elf_build_id to the generic struct bfd_build_id, populated when an ELF or PE BFD is read. gdb is updated to use that, and to use the build-id to find symbols for PE files also. There is currently no generic way to extract the build-id from an object file, perhaps an option to objdump to do this might make sense? On x86_64-pc-cygwin, gdb's sepdebug.exp changes: -# of unsupported tests 1 +# of expected passes 90 I don't seem to get consistent testsuite runs on i686-linux-gnu, but there don't appear to be any regressions. bfd/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * elf-bfd.h : Remove struct elf_build_id. * bfd.c : Add struct bfd_build_id. * bfd-in2.h: Regenerate. * elf.c (elfobj_grok_gnu_build_id): Update to use bfd_build_id. * libpei.h: Add protoype and macros for bfd_XXi_slurp_codeview_record. * peXXigen.c (_bfd_XXi_slurp_codeview_record): Make public * peicode.h (pe_bfd_read_buildid): Add. (pe_bfd_object_p): Use pe_bfd_read_buildid(). gdb/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * build-id.c: Don't include elf-bfd.h. (build_id_bfd_get): Use bfd_build_id. (build_id_verify): Ditto. * build-id.h: Ditto. (find_separate_debug_file_by_buildid): Ditto. * python/py-objfile.c: Don't include elf-bfd.h. (objfpy_get_build_id) Use bfd_build_id. (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto. * coffread.c: Include build-id.h. (coff_symfile_read): Try find_separate_debug_file_by_buildid. gdb/doc/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.texinfo (Separate Debug Files): Document that PE is also supported. gdb/testsuite/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.base/sepdebug.exp: Add EXEEXT where needed. * lib/gdb.exp (get_build_id): Teach how to extract build-id from a PE file. * lib/future.exp (gdb_find_objdump): Add gdb_find_objdump. Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
2015-04-07 21:49:08 +02:00
if (abfd->build_id != NULL)
return abfd->build_id;
/* No build-id */
return NULL;
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
}
/* See build-id.h. */
int
build_id_verify (bfd *abfd, size_t check_len, const bfd_byte *check)
{
Allow gdb to find debug symbols file by build-id for PE file format also This promotes BFD's struct elf_build_id to the generic struct bfd_build_id, populated when an ELF or PE BFD is read. gdb is updated to use that, and to use the build-id to find symbols for PE files also. There is currently no generic way to extract the build-id from an object file, perhaps an option to objdump to do this might make sense? On x86_64-pc-cygwin, gdb's sepdebug.exp changes: -# of unsupported tests 1 +# of expected passes 90 I don't seem to get consistent testsuite runs on i686-linux-gnu, but there don't appear to be any regressions. bfd/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * elf-bfd.h : Remove struct elf_build_id. * bfd.c : Add struct bfd_build_id. * bfd-in2.h: Regenerate. * elf.c (elfobj_grok_gnu_build_id): Update to use bfd_build_id. * libpei.h: Add protoype and macros for bfd_XXi_slurp_codeview_record. * peXXigen.c (_bfd_XXi_slurp_codeview_record): Make public * peicode.h (pe_bfd_read_buildid): Add. (pe_bfd_object_p): Use pe_bfd_read_buildid(). gdb/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * build-id.c: Don't include elf-bfd.h. (build_id_bfd_get): Use bfd_build_id. (build_id_verify): Ditto. * build-id.h: Ditto. (find_separate_debug_file_by_buildid): Ditto. * python/py-objfile.c: Don't include elf-bfd.h. (objfpy_get_build_id) Use bfd_build_id. (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto. * coffread.c: Include build-id.h. (coff_symfile_read): Try find_separate_debug_file_by_buildid. gdb/doc/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.texinfo (Separate Debug Files): Document that PE is also supported. gdb/testsuite/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.base/sepdebug.exp: Add EXEEXT where needed. * lib/gdb.exp (get_build_id): Teach how to extract build-id from a PE file. * lib/future.exp (gdb_find_objdump): Add gdb_find_objdump. Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
2015-04-07 21:49:08 +02:00
const struct bfd_build_id *found;
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
int retval = 0;
found = build_id_bfd_get (abfd);
if (found == NULL)
warning (_("File \"%s\" has no build-id, file skipped"),
bfd_get_filename (abfd));
else if (found->size != check_len
|| memcmp (found->data, check, found->size) != 0)
warning (_("File \"%s\" has a different build-id, file skipped"),
bfd_get_filename (abfd));
else
retval = 1;
return retval;
}
/* See build-id.h. */
Use class to manage BFD reference counts This introduces a new specialization of gdb::ref_ptr that can be used to manage BFD reference counts. Then it changes most places in gdb to use this new class, rather than explicit reference-counting or cleanups. This patch removes make_cleanup_bfd_unref. If you look you will see a couple of spots using "release" where a use of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next patch. I think this patch fixes some latent bugs. For example, it seems to me that previously objfpy_add_separate_debug_file leaked a BFD. I'm not 100% certain that the macho_symfile_read_all_oso change is correct. The existing code here is hard for me to follow. One goal of this sort of automated reference counting, though, is to make it more difficult to make logic errors; so hopefully the code is clear now. 2017-01-10 Tom Tromey <tom@tromey.com> * windows-tdep.c (windows_xfer_shared_library): Update. * windows-nat.c (windows_make_so): Update. * utils.h (make_cleanup_bfd_unref): Remove. * utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove. * symfile.h (symfile_bfd_open) (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * symfile.c (read_symbols, symbol_file_add) (separate_debug_file_exists): Update. (symfile_bfd_open): Return gdb_bfd_ref_ptr. (generic_load, reread_symbols): Update. * symfile-mem.c (symbol_file_add_from_memory): Update. * spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr. (spu_symbol_file_add_from_memory): Update. * solist.h (struct target_so_ops) <bfd_open>: Return gdb_bfd_ref_ptr. (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. * solib.c (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. (solib_map_sections, reload_shared_libraries_1): Update. * solib-svr4.c (enable_break): Update. * solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr. * solib-frv.c (enable_break2): Update. * solib-dsbt.c (enable_break): Update. * solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return gdb_bfd_ref_ptr. (darwin_solib_get_all_image_info_addr_at_init): Update. (darwin_bfd_open): Return gdb_bfd_ref_ptr. * solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr. * record-full.c (record_full_save): Update. * python/py-objfile.c (objfpy_add_separate_debug_file): Update. * procfs.c (insert_dbx_link_bpt_in_file): Update. * minidebug.c (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * machoread.c (macho_add_oso_symfile): Change abfd to gdb_bfd_ref_ptr. (macho_symfile_read_all_oso): Update. (macho_check_dsym): Return gdb_bfd_ref_ptr. (macho_symfile_read): Update. * jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr. (jit_bfd_try_read_symtab): Update. * gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. (gdb_bfd_ref_policy): New struct. (gdb_bfd_ref_ptr): New typedef. * gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. * gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr. * gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr. (gcore_command): Update. * exec.c (exec_file_attach): Update. * elfread.c (elf_symfile_read): Update. * dwarf2read.c (dwarf2_get_dwz_file): Update. (try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr. (open_and_init_dwo_file): Update. (open_dwp_file): Return gdb_bfd_ref_ptr. (open_and_init_dwp_file): Update. * corelow.c (core_open): Update. * compile/compile-object-load.c (compile_object_load): Update. * common/gdb_ref_ptr.h (ref_ptr::operator->): New operator. * coffread.c (coff_symfile_read): Update. * cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return gdb_bfd_ref_ptr. Rename. (dump_bfd_file, restore_command): Update. * build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. * build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. (find_separate_debug_file_by_buildid): Update.
2016-11-21 19:12:23 +01:00
gdb_bfd_ref_ptr
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
build_id_to_debug_bfd (size_t build_id_len, const bfd_byte *build_id)
{
char *link, *debugdir;
VEC (char_ptr) *debugdir_vec;
struct cleanup *back_to;
int ix;
Use class to manage BFD reference counts This introduces a new specialization of gdb::ref_ptr that can be used to manage BFD reference counts. Then it changes most places in gdb to use this new class, rather than explicit reference-counting or cleanups. This patch removes make_cleanup_bfd_unref. If you look you will see a couple of spots using "release" where a use of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next patch. I think this patch fixes some latent bugs. For example, it seems to me that previously objfpy_add_separate_debug_file leaked a BFD. I'm not 100% certain that the macho_symfile_read_all_oso change is correct. The existing code here is hard for me to follow. One goal of this sort of automated reference counting, though, is to make it more difficult to make logic errors; so hopefully the code is clear now. 2017-01-10 Tom Tromey <tom@tromey.com> * windows-tdep.c (windows_xfer_shared_library): Update. * windows-nat.c (windows_make_so): Update. * utils.h (make_cleanup_bfd_unref): Remove. * utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove. * symfile.h (symfile_bfd_open) (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * symfile.c (read_symbols, symbol_file_add) (separate_debug_file_exists): Update. (symfile_bfd_open): Return gdb_bfd_ref_ptr. (generic_load, reread_symbols): Update. * symfile-mem.c (symbol_file_add_from_memory): Update. * spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr. (spu_symbol_file_add_from_memory): Update. * solist.h (struct target_so_ops) <bfd_open>: Return gdb_bfd_ref_ptr. (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. * solib.c (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. (solib_map_sections, reload_shared_libraries_1): Update. * solib-svr4.c (enable_break): Update. * solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr. * solib-frv.c (enable_break2): Update. * solib-dsbt.c (enable_break): Update. * solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return gdb_bfd_ref_ptr. (darwin_solib_get_all_image_info_addr_at_init): Update. (darwin_bfd_open): Return gdb_bfd_ref_ptr. * solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr. * record-full.c (record_full_save): Update. * python/py-objfile.c (objfpy_add_separate_debug_file): Update. * procfs.c (insert_dbx_link_bpt_in_file): Update. * minidebug.c (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * machoread.c (macho_add_oso_symfile): Change abfd to gdb_bfd_ref_ptr. (macho_symfile_read_all_oso): Update. (macho_check_dsym): Return gdb_bfd_ref_ptr. (macho_symfile_read): Update. * jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr. (jit_bfd_try_read_symtab): Update. * gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. (gdb_bfd_ref_policy): New struct. (gdb_bfd_ref_ptr): New typedef. * gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. * gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr. * gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr. (gcore_command): Update. * exec.c (exec_file_attach): Update. * elfread.c (elf_symfile_read): Update. * dwarf2read.c (dwarf2_get_dwz_file): Update. (try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr. (open_and_init_dwo_file): Update. (open_dwp_file): Return gdb_bfd_ref_ptr. (open_and_init_dwp_file): Update. * corelow.c (core_open): Update. * compile/compile-object-load.c (compile_object_load): Update. * common/gdb_ref_ptr.h (ref_ptr::operator->): New operator. * coffread.c (coff_symfile_read): Update. * cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return gdb_bfd_ref_ptr. Rename. (dump_bfd_file, restore_command): Update. * build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. * build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. (find_separate_debug_file_by_buildid): Update.
2016-11-21 19:12:23 +01:00
gdb_bfd_ref_ptr abfd;
Add casts to memory allocation related calls Most allocation functions (if not all) return a void* pointing to the allocated memory. In C++, we need to add an explicit cast when assigning the result to a pointer to another type (which is the case more often than not). The content of this patch is taken from Pedro's branch, from commit "(mostly) auto-generated patch to insert casts needed for C++". I validated that the changes make sense and manually reflowed the code to make it respect the coding style. I also found multiple places where I could use XNEW/XNEWVEC/XRESIZEVEC/etc. Thanks a lot to whoever did that automated script to insert casts, doing it completely by hand would have taken a ridiculous amount of time. Only files built on x86 with --enable-targets=all are modified. This means that all other -nat.c files are untouched and will have to be dealt with later by using appropiate compilers. Or maybe we can try to build them with a regular g++ just to know where to add casts, I don't know. I built-tested this with --enable-targets=all and reg-tested. Here's the changelog entry, which was not too bad to make despite the size, thanks to David Malcom's script. I fixed some bits by hand, but there might be some wrong parts left (hopefully not). gdb/ChangeLog: * aarch64-linux-tdep.c (aarch64_stap_parse_special_token): Add cast to allocation result assignment. * ada-exp.y (write_object_renaming): Likewise. (write_ambiguous_var): Likewise. (ada_nget_field_index): Likewise. (write_var_or_type): Likewise. * ada-lang.c (ada_decode_symbol): Likewise. (ada_value_assign): Likewise. (value_pointer): Likewise. (cache_symbol): Likewise. (add_nonlocal_symbols): Likewise. (ada_name_for_lookup): Likewise. (symbol_completion_add): Likewise. (ada_to_fixed_type_1): Likewise. (ada_get_next_arg): Likewise. (defns_collected): Likewise. * ada-lex.l (processId): Likewise. (processString): Likewise. * ada-tasks.c (read_known_tasks_array): Likewise. (read_known_tasks_list): Likewise. * ada-typeprint.c (decoded_type_name): Likewise. * addrmap.c (addrmap_mutable_create_fixed): Likewise. * amd64-tdep.c (amd64_push_arguments): Likewise. (amd64_displaced_step_copy_insn): Likewise. (amd64_classify_insn_at): Likewise. (amd64_relocate_instruction): Likewise. * amd64obsd-tdep.c (amd64obsd_sigtramp_p): Likewise. * arch-utils.c (simple_displaced_step_copy_insn): Likewise. (initialize_current_architecture): Likewise. * arm-linux-tdep.c (arm_stap_parse_special_token): Likewise. * arm-symbian-tdep.c (arm_symbian_osabi_sniffer): Likewise. * arm-tdep.c (arm_exidx_new_objfile): Likewise. (arm_push_dummy_call): Likewise. (extend_buffer_earlier): Likewise. (arm_adjust_breakpoint_address): Likewise. (arm_skip_stub): Likewise. * auto-load.c (filename_is_in_pattern): Likewise. (maybe_add_script_file): Likewise. (maybe_add_script_text): Likewise. (auto_load_objfile_script_1): Likewise. * auxv.c (ld_so_xfer_auxv): Likewise. * ax-general.c (new_agent_expr): Likewise. (grow_expr): Likewise. (ax_reg_mask): Likewise. * bcache.c (bcache_full): Likewise. * breakpoint.c (program_breakpoint_here_p): Likewise. * btrace.c (parse_xml_raw): Likewise. * build-id.c (build_id_to_debug_bfd): Likewise. * buildsym.c (end_symtab_with_blockvector): Likewise. * c-exp.y (string_exp): Likewise. (qualified_name): Likewise. (write_destructor_name): Likewise. (operator_stoken): Likewise. (parse_number): Likewise. (scan_macro_expansion): Likewise. (yylex): Likewise. (c_print_token): Likewise. * c-lang.c (c_get_string): Likewise. (emit_numeric_character): Likewise. * charset.c (wchar_iterate): Likewise. * cli/cli-cmds.c (complete_command): Likewise. (make_command): Likewise. * cli/cli-dump.c (restore_section_callback): Likewise. (restore_binary_file): Likewise. * cli/cli-interp.c (cli_interpreter_exec): Likewise. * cli/cli-script.c (execute_control_command): Likewise. * cli/cli-setshow.c (do_set_command): Likewise. * coff-pe-read.c (add_pe_forwarded_sym): Likewise. (read_pe_exported_syms): Likewise. * coffread.c (coff_read_struct_type): Likewise. (coff_read_enum_type): Likewise. * common/btrace-common.c (btrace_data_append): Likewise. * common/buffer.c (buffer_grow): Likewise. * common/filestuff.c (gdb_fopen_cloexec): Likewise. * common/format.c (parse_format_string): Likewise. * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): Likewise. * common/xml-utils.c (xml_escape_text): Likewise. * compile/compile-object-load.c (copy_sections): Likewise. (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * completer.c (filename_completer): Likewise. * corefile.c (read_memory_typed_address): Likewise. (write_memory_unsigned_integer): Likewise. (write_memory_signed_integer): Likewise. (complete_set_gnutarget): Likewise. * corelow.c (get_core_register_section): Likewise. * cp-name-parser.y (d_grab): Likewise. (allocate_info): Likewise. (cp_new_demangle_parse_info): Likewise. * cp-namespace.c (cp_scan_for_anonymous_namespaces): Likewise. (cp_lookup_symbol_in_namespace): Likewise. (lookup_namespace_scope): Likewise. (find_symbol_in_baseclass): Likewise. (cp_lookup_nested_symbol): Likewise. (cp_lookup_transparent_type_loop): Likewise. * cp-support.c (copy_string_to_obstack): Likewise. (make_symbol_overload_list): Likewise. (make_symbol_overload_list_namespace): Likewise. (make_symbol_overload_list_adl_namespace): Likewise. (first_component_command): Likewise. * cp-valprint.c (cp_print_value): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * d-exp.y (StringExp): Likewise. * d-namespace.c (d_lookup_symbol_in_module): Likewise. (lookup_module_scope): Likewise. (find_symbol_in_baseclass): Likewise. (d_lookup_nested_symbol): Likewise. * dbxread.c (find_stab_function_addr): Likewise. (read_dbx_symtab): Likewise. (dbx_end_psymtab): Likewise. (cp_set_block_scope): Likewise. * dcache.c (dcache_alloc): Likewise. * demangle.c (_initialize_demangler): Likewise. * dicos-tdep.c (dicos_load_module_p): Likewise. * dictionary.c (dict_create_hashed_expandable): Likewise. (dict_create_linear_expandable): Likewise. (expand_hashtable): Likewise. (add_symbol_linear_expandable): Likewise. * dwarf2-frame.c (add_cie): Likewise. (add_fde): Likewise. (dwarf2_build_frame_info): Likewise. * dwarf2expr.c (dwarf_expr_grow_stack): Likewise. (dwarf_expr_fetch_address): Likewise. (add_piece): Likewise. (execute_stack_op): Likewise. * dwarf2loc.c (chain_candidate): Likewise. (dwarf_entry_parameter_to_value): Likewise. (read_pieced_value): Likewise. (write_pieced_value): Likewise. * dwarf2read.c (dwarf2_read_section): Likewise. (add_type_unit): Likewise. (read_comp_units_from_section): Likewise. (fixup_go_packaging): Likewise. (dwarf2_compute_name): Likewise. (dwarf2_physname): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (read_func_scope): Likewise. (read_call_site_scope): Likewise. (dwarf2_attach_fields_to_type): Likewise. (process_structure_scope): Likewise. (mark_common_block_symbol_computed): Likewise. (read_common_block): Likewise. (abbrev_table_read_table): Likewise. (guess_partial_die_structure_name): Likewise. (fixup_partial_die): Likewise. (add_file_name): Likewise. (dwarf2_const_value_data): Likewise. (dwarf2_const_value_attr): Likewise. (build_error_marker_type): Likewise. (guess_full_die_structure_name): Likewise. (anonymous_struct_prefix): Likewise. (typename_concat): Likewise. (dwarf2_canonicalize_name): Likewise. (dwarf2_name): Likewise. (write_constant_as_bytes): Likewise. (dwarf2_fetch_constant_bytes): Likewise. (copy_string): Likewise. (parse_macro_definition): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_rel_plt_read): Likewise. (elf_gnu_ifunc_resolve_by_cache): Likewise. (elf_gnu_ifunc_resolve_by_got): Likewise. (elf_read_minimal_symbols): Likewise. (elf_gnu_ifunc_record_cache): Likewise. * event-top.c (top_level_prompt): Likewise. (command_line_handler): Likewise. * exec.c (resize_section_table): Likewise. * expprint.c (print_subexp_standard): Likewise. * fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise. * findcmd.c (parse_find_args): Likewise. * findvar.c (address_from_register): Likewise. * frame.c (get_prev_frame_always): Likewise. * gdb_bfd.c (gdb_bfd_ref): Likewise. (get_section_descriptor): Likewise. * gdb_obstack.c (obconcat): Likewise. (obstack_strdup): Likewise. * gdbtypes.c (lookup_function_type_with_arguments): Likewise. (create_set_type): Likewise. (lookup_unsigned_typename): Likewise. (lookup_signed_typename): Likewise. (resolve_dynamic_union): Likewise. (resolve_dynamic_struct): Likewise. (add_dyn_prop): Likewise. (copy_dynamic_prop_list): Likewise. (arch_flags_type): Likewise. (append_composite_type_field_raw): Likewise. * gdbtypes.h (INIT_FUNC_SPECIFIC): Likewise. * gnu-v3-abi.c (gnuv3_rtti_type): Likewise. * go-exp.y (string_exp): Likewise. * go-lang.c (go_demangle): Likewise. * guile/guile.c (compute_scheme_string): Likewise. * guile/scm-cmd.c (gdbscm_parse_command_name): Likewise. (gdbscm_canonicalize_command_name): Likewise. * guile/scm-ports.c (ioscm_init_stdio_buffers): Likewise. (ioscm_init_memory_port): Likewise. (ioscm_reinit_memory_port): Likewise. * guile/scm-utils.c (gdbscm_gc_xstrdup): Likewise. (gdbscm_gc_dup_argv): Likewise. * h8300-tdep.c (h8300_push_dummy_call): Likewise. * hppa-tdep.c (internalize_unwinds): Likewise. (read_unwind_info): Likewise. * i386-cygwin-tdep.c (core_process_module_section): Likewise. (windows_core_xfer_shared_libraries): Likewise. * i386-tdep.c (i386_displaced_step_copy_insn): Likewise. (i386_stap_parse_special_token_triplet): Likewise. (i386_stap_parse_special_token_three_arg_disp): Likewise. * i386obsd-tdep.c (i386obsd_sigtramp_p): Likewise. * inf-child.c (inf_child_fileio_readlink): Likewise. * inf-ptrace.c (inf_ptrace_fetch_register): Likewise. (inf_ptrace_store_register): Likewise. * infrun.c (follow_exec): Likewise. (displaced_step_prepare_throw): Likewise. (save_stop_context): Likewise. (save_infcall_suspend_state): Likewise. * jit.c (jit_read_descriptor): Likewise. (jit_read_code_entry): Likewise. (jit_symtab_line_mapping_add_impl): Likewise. (finalize_symtab): Likewise. (jit_unwind_reg_get_impl): Likewise. * jv-exp.y (QualifiedName): Likewise. * jv-lang.c (get_java_utf8_name): Likewise. (type_from_class): Likewise. (java_demangle_type_signature): Likewise. (java_class_name_from_physname): Likewise. * jv-typeprint.c (java_type_print_base): Likewise. * jv-valprint.c (java_value_print): Likewise. * language.c (add_language): Likewise. * linespec.c (add_sal_to_sals_basic): Likewise. (add_sal_to_sals): Likewise. (decode_objc): Likewise. (find_linespec_symbols): Likewise. * linux-fork.c (fork_save_infrun_state): Likewise. * linux-nat.c (linux_nat_detach): Likewise. (linux_nat_fileio_readlink): Likewise. * linux-record.c (record_linux_sockaddr): Likewise. (record_linux_msghdr): Likewise. (Do): Likewise. * linux-tdep.c (linux_core_info_proc_mappings): Likewise. (linux_collect_regset_section_cb): Likewise. (linux_get_siginfo_data): Likewise. * linux-thread-db.c (try_thread_db_load_from_pdir_1): Likewise. (try_thread_db_load_from_dir): Likewise. (thread_db_load_search): Likewise. (info_auto_load_libthread_db): Likewise. * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise. (m32c_m16c_pointer_to_address): Likewise. * m68hc11-tdep.c (m68hc11_pseudo_register_write): Likewise. * m68k-tdep.c (m68k_get_longjmp_target): Likewise. * machoread.c (macho_check_dsym): Likewise. * macroexp.c (resize_buffer): Likewise. (gather_arguments): Likewise. (maybe_expand): Likewise. * macrotab.c (new_macro_key): Likewise. (new_source_file): Likewise. (new_macro_definition): Likewise. * mdebugread.c (parse_symbol): Likewise. (parse_type): Likewise. (parse_partial_symbols): Likewise. (psymtab_to_symtab_1): Likewise. * mem-break.c (default_memory_insert_breakpoint): Likewise. * mi/mi-cmd-break.c (mi_argv_to_format): Likewise. * mi/mi-main.c (mi_cmd_data_read_memory): Likewise. (mi_cmd_data_read_memory_bytes): Likewise. (mi_cmd_data_write_memory_bytes): Likewise. (mi_cmd_trace_frame_collected): Likewise. * mi/mi-parse.c (mi_parse_argv): Likewise. (mi_parse): Likewise. * minidebug.c (lzma_open): Likewise. (lzma_pread): Likewise. * mips-tdep.c (mips_read_fp_register_single): Likewise. (mips_print_fp_register): Likewise. * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Likewise. * mipsread.c (read_alphacoff_dynamic_symtab): Likewise. * mt-tdep.c (mt_register_name): Likewise. (mt_registers_info): Likewise. (mt_push_dummy_call): Likewise. * namespace.c (add_using_directive): Likewise. * nat/linux-btrace.c (perf_event_read): Likewise. (linux_enable_bts): Likewise. * nat/linux-osdata.c (linux_common_core_of_thread): Likewise. * nat/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Likewise. * nto-tdep.c (nto_find_and_open_solib): Likewise. (nto_parse_redirection): Likewise. * objc-lang.c (objc_demangle): Likewise. (find_methods): Likewise. * objfiles.c (get_objfile_bfd_data): Likewise. (set_objfile_main_name): Likewise. (allocate_objfile): Likewise. (objfile_relocate): Likewise. (update_section_map): Likewise. * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Likewise. * p-exp.y (exp): Likewise. (yylex): Likewise. * p-valprint.c (pascal_object_print_value): Likewise. * parse.c (initialize_expout): Likewise. (mark_completion_tag): Likewise. (copy_name): Likewise. (parse_float): Likewise. (type_stack_reserve): Likewise. * ppc-linux-tdep.c (ppc_stap_parse_special_token): Likewise. (ppu2spu_prev_register): Likewise. * ppc-ravenscar-thread.c (supply_register_at_address): Likewise. * printcmd.c (printf_wide_c_string): Likewise. (printf_pointer): Likewise. * probe.c (parse_probes): Likewise. * python/py-cmd.c (gdbpy_parse_command_name): Likewise. (cmdpy_init): Likewise. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Likewise. * python/py-symtab.c (set_sal): Likewise. * python/py-unwind.c (pyuw_sniffer): Likewise. * python/python.c (python_interactive_command): Likewise. (compute_python_string): Likewise. * ravenscar-thread.c (get_running_thread_id): Likewise. * record-full.c (record_full_exec_insn): Likewise. (record_full_core_open_1): Likewise. * regcache.c (regcache_raw_read_signed): Likewise. (regcache_raw_read_unsigned): Likewise. (regcache_cooked_read_signed): Likewise. (regcache_cooked_read_unsigned): Likewise. * remote-fileio.c (remote_fileio_func_open): Likewise. (remote_fileio_func_rename): Likewise. (remote_fileio_func_unlink): Likewise. (remote_fileio_func_stat): Likewise. (remote_fileio_func_system): Likewise. * remote-mips.c (mips_xfer_memory): Likewise. (mips_load_srec): Likewise. (pmon_end_download): Likewise. * remote.c (new_remote_state): Likewise. (map_regcache_remote_table): Likewise. (remote_register_number_and_offset): Likewise. (init_remote_state): Likewise. (get_memory_packet_size): Likewise. (remote_pass_signals): Likewise. (remote_program_signals): Likewise. (remote_start_remote): Likewise. (remote_check_symbols): Likewise. (remote_query_supported): Likewise. (extended_remote_attach): Likewise. (process_g_packet): Likewise. (store_registers_using_G): Likewise. (putpkt_binary): Likewise. (read_frame): Likewise. (compare_sections_command): Likewise. (remote_hostio_pread): Likewise. (remote_hostio_readlink): Likewise. (remote_file_put): Likewise. (remote_file_get): Likewise. (remote_pid_to_exec_file): Likewise. (_initialize_remote): Likewise. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. * rs6000-tdep.c (ppc_displaced_step_copy_insn): Likewise. (bfd_uses_spe_extensions): Likewise. * s390-linux-tdep.c (s390_displaced_step_copy_insn): Likewise. * score-tdep.c (score7_malloc_and_get_memblock): Likewise. * solib-dsbt.c (decode_loadmap): Likewise. (fetch_loadmap): Likewise. (scan_dyntag): Likewise. (enable_break): Likewise. (dsbt_relocate_main_executable): Likewise. * solib-frv.c (fetch_loadmap): Likewise. (enable_break2): Likewise. (frv_relocate_main_executable): Likewise. * solib-spu.c (spu_relocate_main_executable): Likewise. (spu_bfd_open): Likewise. * solib-svr4.c (lm_info_read): Likewise. (read_program_header): Likewise. (find_program_interpreter): Likewise. (scan_dyntag): Likewise. (elf_locate_base): Likewise. (open_symbol_file_object): Likewise. (read_program_headers_from_bfd): Likewise. (svr4_relocate_main_executable): Likewise. * solib-target.c (solib_target_relocate_section_addresses): Likewise. * solib.c (solib_find_1): Likewise. (exec_file_find): Likewise. (solib_find): Likewise. * source.c (openp): Likewise. (print_source_lines_base): Likewise. (forward_search_command): Likewise. * sparc-ravenscar-thread.c (supply_register_at_address): Likewise. * spu-tdep.c (spu2ppu_prev_register): Likewise. (spu_get_overlay_table): Likewise. * stabsread.c (patch_block_stabs): Likewise. (define_symbol): Likewise. (again:): Likewise. (read_member_functions): Likewise. (read_one_struct_field): Likewise. (read_enum_type): Likewise. (common_block_start): Likewise. * stack.c (read_frame_arg): Likewise. (backtrace_command): Likewise. * stap-probe.c (stap_parse_register_operand): Likewise. * symfile.c (syms_from_objfile_1): Likewise. (find_separate_debug_file): Likewise. (load_command): Likewise. (load_progress): Likewise. (load_section_callback): Likewise. (reread_symbols): Likewise. (add_filename_language): Likewise. (allocate_compunit_symtab): Likewise. (read_target_long_array): Likewise. (simple_read_overlay_table): Likewise. * symtab.c (symbol_set_names): Likewise. (resize_symbol_cache): Likewise. (rbreak_command): Likewise. (completion_list_add_name): Likewise. (completion_list_objc_symbol): Likewise. (add_filename_to_list): Likewise. * target-descriptions.c (maint_print_c_tdesc_cmd): Likewise. * target-memory.c (target_write_memory_blocks): Likewise. * target.c (target_read_string): Likewise. (read_whatever_is_readable): Likewise. (target_read_alloc_1): Likewise. (simple_search_memory): Likewise. (target_fileio_read_alloc_1): Likewise. * tilegx-tdep.c (tilegx_push_dummy_call): Likewise. * top.c (command_line_input): Likewise. * tracefile-tfile.c (tfile_fetch_registers): Likewise. * tracefile.c (tracefile_fetch_registers): Likewise. * tracepoint.c (add_memrange): Likewise. (init_collection_list): Likewise. (add_aexpr): Likewise. (trace_dump_actions): Likewise. (parse_trace_status): Likewise. (parse_tracepoint_definition): Likewise. (parse_tsv_definition): Likewise. (parse_static_tracepoint_marker_definition): Likewise. * tui/tui-file.c (tui_sfileopen): Likewise. (tui_file_adjust_strbuf): Likewise. * tui/tui-io.c (tui_expand_tabs): Likewise. * tui/tui-source.c (tui_set_source_content): Likewise. * typeprint.c (find_global_typedef): Likewise. * ui-file.c (do_ui_file_xstrdup): Likewise. (ui_file_obsavestring): Likewise. (mem_file_write): Likewise. * utils.c (make_hex_string): Likewise. (get_regcomp_error): Likewise. (puts_filtered_tabular): Likewise. (gdb_realpath_keepfile): Likewise. (ldirname): Likewise. (gdb_bfd_errmsg): Likewise. (substitute_path_component): Likewise. * valops.c (search_struct_method): Likewise. (find_oload_champ_namespace_loop): Likewise. * valprint.c (print_decimal_chars): Likewise. (read_string): Likewise. (generic_emit_char): Likewise. * varobj.c (varobj_delete): Likewise. (varobj_value_get_print_value): Likewise. * vaxobsd-tdep.c (vaxobsd_sigtramp_sniffer): Likewise. * windows-tdep.c (display_one_tib): Likewise. * xcoffread.c (read_xcoff_symtab): Likewise. (process_xcoff_symbol): Likewise. (swap_sym): Likewise. (scan_xcoff_symtab): Likewise. (xcoff_initial_scan): Likewise. * xml-support.c (gdb_xml_end_element): Likewise. (xml_process_xincludes): Likewise. (xml_fetch_content_from_file): Likewise. * xml-syscall.c (xml_list_of_syscalls): Likewise. * xstormy16-tdep.c (xstormy16_push_dummy_call): Likewise. gdb/gdbserver/ChangeLog: * ax.c (gdb_parse_agent_expr): Add cast to allocation result assignment. (gdb_unparse_agent_expr): Likewise. * hostio.c (require_data): Likewise. (handle_pread): Likewise. * linux-low.c (disable_regset): Likewise. (fetch_register): Likewise. (store_register): Likewise. (get_dynamic): Likewise. (linux_qxfer_libraries_svr4): Likewise. * mem-break.c (delete_fast_tracepoint_jump): Likewise. (set_fast_tracepoint_jump): Likewise. (uninsert_fast_tracepoint_jumps_at): Likewise. (reinsert_fast_tracepoint_jumps_at): Likewise. (validate_inserted_breakpoint): Likewise. (clone_agent_expr): Likewise. * regcache.c (init_register_cache): Likewise. * remote-utils.c (putpkt_binary_1): Likewise. (decode_M_packet): Likewise. (decode_X_packet): Likewise. (look_up_one_symbol): Likewise. (relocate_instruction): Likewise. (monitor_output): Likewise. * server.c (handle_search_memory): Likewise. (handle_qxfer_exec_file): Likewise. (handle_qxfer_libraries): Likewise. (handle_qxfer): Likewise. (handle_query): Likewise. (handle_v_cont): Likewise. (handle_v_run): Likewise. (captured_main): Likewise. * target.c (write_inferior_memory): Likewise. * thread-db.c (try_thread_db_load_from_dir): Likewise. * tracepoint.c (init_trace_buffer): Likewise. (add_tracepoint_action): Likewise. (add_traceframe): Likewise. (add_traceframe_block): Likewise. (cmd_qtdpsrc): Likewise. (cmd_qtdv): Likewise. (cmd_qtstatus): Likewise. (response_source): Likewise. (response_tsv): Likewise. (cmd_qtnotes): Likewise. (gdb_collect): Likewise. (initialize_tracepoint): Likewise.
2015-09-25 20:08:06 +02:00
int alloc_len;
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
/* DEBUG_FILE_DIRECTORY/.build-id/ab/cdef */
Add casts to memory allocation related calls Most allocation functions (if not all) return a void* pointing to the allocated memory. In C++, we need to add an explicit cast when assigning the result to a pointer to another type (which is the case more often than not). The content of this patch is taken from Pedro's branch, from commit "(mostly) auto-generated patch to insert casts needed for C++". I validated that the changes make sense and manually reflowed the code to make it respect the coding style. I also found multiple places where I could use XNEW/XNEWVEC/XRESIZEVEC/etc. Thanks a lot to whoever did that automated script to insert casts, doing it completely by hand would have taken a ridiculous amount of time. Only files built on x86 with --enable-targets=all are modified. This means that all other -nat.c files are untouched and will have to be dealt with later by using appropiate compilers. Or maybe we can try to build them with a regular g++ just to know where to add casts, I don't know. I built-tested this with --enable-targets=all and reg-tested. Here's the changelog entry, which was not too bad to make despite the size, thanks to David Malcom's script. I fixed some bits by hand, but there might be some wrong parts left (hopefully not). gdb/ChangeLog: * aarch64-linux-tdep.c (aarch64_stap_parse_special_token): Add cast to allocation result assignment. * ada-exp.y (write_object_renaming): Likewise. (write_ambiguous_var): Likewise. (ada_nget_field_index): Likewise. (write_var_or_type): Likewise. * ada-lang.c (ada_decode_symbol): Likewise. (ada_value_assign): Likewise. (value_pointer): Likewise. (cache_symbol): Likewise. (add_nonlocal_symbols): Likewise. (ada_name_for_lookup): Likewise. (symbol_completion_add): Likewise. (ada_to_fixed_type_1): Likewise. (ada_get_next_arg): Likewise. (defns_collected): Likewise. * ada-lex.l (processId): Likewise. (processString): Likewise. * ada-tasks.c (read_known_tasks_array): Likewise. (read_known_tasks_list): Likewise. * ada-typeprint.c (decoded_type_name): Likewise. * addrmap.c (addrmap_mutable_create_fixed): Likewise. * amd64-tdep.c (amd64_push_arguments): Likewise. (amd64_displaced_step_copy_insn): Likewise. (amd64_classify_insn_at): Likewise. (amd64_relocate_instruction): Likewise. * amd64obsd-tdep.c (amd64obsd_sigtramp_p): Likewise. * arch-utils.c (simple_displaced_step_copy_insn): Likewise. (initialize_current_architecture): Likewise. * arm-linux-tdep.c (arm_stap_parse_special_token): Likewise. * arm-symbian-tdep.c (arm_symbian_osabi_sniffer): Likewise. * arm-tdep.c (arm_exidx_new_objfile): Likewise. (arm_push_dummy_call): Likewise. (extend_buffer_earlier): Likewise. (arm_adjust_breakpoint_address): Likewise. (arm_skip_stub): Likewise. * auto-load.c (filename_is_in_pattern): Likewise. (maybe_add_script_file): Likewise. (maybe_add_script_text): Likewise. (auto_load_objfile_script_1): Likewise. * auxv.c (ld_so_xfer_auxv): Likewise. * ax-general.c (new_agent_expr): Likewise. (grow_expr): Likewise. (ax_reg_mask): Likewise. * bcache.c (bcache_full): Likewise. * breakpoint.c (program_breakpoint_here_p): Likewise. * btrace.c (parse_xml_raw): Likewise. * build-id.c (build_id_to_debug_bfd): Likewise. * buildsym.c (end_symtab_with_blockvector): Likewise. * c-exp.y (string_exp): Likewise. (qualified_name): Likewise. (write_destructor_name): Likewise. (operator_stoken): Likewise. (parse_number): Likewise. (scan_macro_expansion): Likewise. (yylex): Likewise. (c_print_token): Likewise. * c-lang.c (c_get_string): Likewise. (emit_numeric_character): Likewise. * charset.c (wchar_iterate): Likewise. * cli/cli-cmds.c (complete_command): Likewise. (make_command): Likewise. * cli/cli-dump.c (restore_section_callback): Likewise. (restore_binary_file): Likewise. * cli/cli-interp.c (cli_interpreter_exec): Likewise. * cli/cli-script.c (execute_control_command): Likewise. * cli/cli-setshow.c (do_set_command): Likewise. * coff-pe-read.c (add_pe_forwarded_sym): Likewise. (read_pe_exported_syms): Likewise. * coffread.c (coff_read_struct_type): Likewise. (coff_read_enum_type): Likewise. * common/btrace-common.c (btrace_data_append): Likewise. * common/buffer.c (buffer_grow): Likewise. * common/filestuff.c (gdb_fopen_cloexec): Likewise. * common/format.c (parse_format_string): Likewise. * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): Likewise. * common/xml-utils.c (xml_escape_text): Likewise. * compile/compile-object-load.c (copy_sections): Likewise. (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * completer.c (filename_completer): Likewise. * corefile.c (read_memory_typed_address): Likewise. (write_memory_unsigned_integer): Likewise. (write_memory_signed_integer): Likewise. (complete_set_gnutarget): Likewise. * corelow.c (get_core_register_section): Likewise. * cp-name-parser.y (d_grab): Likewise. (allocate_info): Likewise. (cp_new_demangle_parse_info): Likewise. * cp-namespace.c (cp_scan_for_anonymous_namespaces): Likewise. (cp_lookup_symbol_in_namespace): Likewise. (lookup_namespace_scope): Likewise. (find_symbol_in_baseclass): Likewise. (cp_lookup_nested_symbol): Likewise. (cp_lookup_transparent_type_loop): Likewise. * cp-support.c (copy_string_to_obstack): Likewise. (make_symbol_overload_list): Likewise. (make_symbol_overload_list_namespace): Likewise. (make_symbol_overload_list_adl_namespace): Likewise. (first_component_command): Likewise. * cp-valprint.c (cp_print_value): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * d-exp.y (StringExp): Likewise. * d-namespace.c (d_lookup_symbol_in_module): Likewise. (lookup_module_scope): Likewise. (find_symbol_in_baseclass): Likewise. (d_lookup_nested_symbol): Likewise. * dbxread.c (find_stab_function_addr): Likewise. (read_dbx_symtab): Likewise. (dbx_end_psymtab): Likewise. (cp_set_block_scope): Likewise. * dcache.c (dcache_alloc): Likewise. * demangle.c (_initialize_demangler): Likewise. * dicos-tdep.c (dicos_load_module_p): Likewise. * dictionary.c (dict_create_hashed_expandable): Likewise. (dict_create_linear_expandable): Likewise. (expand_hashtable): Likewise. (add_symbol_linear_expandable): Likewise. * dwarf2-frame.c (add_cie): Likewise. (add_fde): Likewise. (dwarf2_build_frame_info): Likewise. * dwarf2expr.c (dwarf_expr_grow_stack): Likewise. (dwarf_expr_fetch_address): Likewise. (add_piece): Likewise. (execute_stack_op): Likewise. * dwarf2loc.c (chain_candidate): Likewise. (dwarf_entry_parameter_to_value): Likewise. (read_pieced_value): Likewise. (write_pieced_value): Likewise. * dwarf2read.c (dwarf2_read_section): Likewise. (add_type_unit): Likewise. (read_comp_units_from_section): Likewise. (fixup_go_packaging): Likewise. (dwarf2_compute_name): Likewise. (dwarf2_physname): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (read_func_scope): Likewise. (read_call_site_scope): Likewise. (dwarf2_attach_fields_to_type): Likewise. (process_structure_scope): Likewise. (mark_common_block_symbol_computed): Likewise. (read_common_block): Likewise. (abbrev_table_read_table): Likewise. (guess_partial_die_structure_name): Likewise. (fixup_partial_die): Likewise. (add_file_name): Likewise. (dwarf2_const_value_data): Likewise. (dwarf2_const_value_attr): Likewise. (build_error_marker_type): Likewise. (guess_full_die_structure_name): Likewise. (anonymous_struct_prefix): Likewise. (typename_concat): Likewise. (dwarf2_canonicalize_name): Likewise. (dwarf2_name): Likewise. (write_constant_as_bytes): Likewise. (dwarf2_fetch_constant_bytes): Likewise. (copy_string): Likewise. (parse_macro_definition): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_rel_plt_read): Likewise. (elf_gnu_ifunc_resolve_by_cache): Likewise. (elf_gnu_ifunc_resolve_by_got): Likewise. (elf_read_minimal_symbols): Likewise. (elf_gnu_ifunc_record_cache): Likewise. * event-top.c (top_level_prompt): Likewise. (command_line_handler): Likewise. * exec.c (resize_section_table): Likewise. * expprint.c (print_subexp_standard): Likewise. * fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise. * findcmd.c (parse_find_args): Likewise. * findvar.c (address_from_register): Likewise. * frame.c (get_prev_frame_always): Likewise. * gdb_bfd.c (gdb_bfd_ref): Likewise. (get_section_descriptor): Likewise. * gdb_obstack.c (obconcat): Likewise. (obstack_strdup): Likewise. * gdbtypes.c (lookup_function_type_with_arguments): Likewise. (create_set_type): Likewise. (lookup_unsigned_typename): Likewise. (lookup_signed_typename): Likewise. (resolve_dynamic_union): Likewise. (resolve_dynamic_struct): Likewise. (add_dyn_prop): Likewise. (copy_dynamic_prop_list): Likewise. (arch_flags_type): Likewise. (append_composite_type_field_raw): Likewise. * gdbtypes.h (INIT_FUNC_SPECIFIC): Likewise. * gnu-v3-abi.c (gnuv3_rtti_type): Likewise. * go-exp.y (string_exp): Likewise. * go-lang.c (go_demangle): Likewise. * guile/guile.c (compute_scheme_string): Likewise. * guile/scm-cmd.c (gdbscm_parse_command_name): Likewise. (gdbscm_canonicalize_command_name): Likewise. * guile/scm-ports.c (ioscm_init_stdio_buffers): Likewise. (ioscm_init_memory_port): Likewise. (ioscm_reinit_memory_port): Likewise. * guile/scm-utils.c (gdbscm_gc_xstrdup): Likewise. (gdbscm_gc_dup_argv): Likewise. * h8300-tdep.c (h8300_push_dummy_call): Likewise. * hppa-tdep.c (internalize_unwinds): Likewise. (read_unwind_info): Likewise. * i386-cygwin-tdep.c (core_process_module_section): Likewise. (windows_core_xfer_shared_libraries): Likewise. * i386-tdep.c (i386_displaced_step_copy_insn): Likewise. (i386_stap_parse_special_token_triplet): Likewise. (i386_stap_parse_special_token_three_arg_disp): Likewise. * i386obsd-tdep.c (i386obsd_sigtramp_p): Likewise. * inf-child.c (inf_child_fileio_readlink): Likewise. * inf-ptrace.c (inf_ptrace_fetch_register): Likewise. (inf_ptrace_store_register): Likewise. * infrun.c (follow_exec): Likewise. (displaced_step_prepare_throw): Likewise. (save_stop_context): Likewise. (save_infcall_suspend_state): Likewise. * jit.c (jit_read_descriptor): Likewise. (jit_read_code_entry): Likewise. (jit_symtab_line_mapping_add_impl): Likewise. (finalize_symtab): Likewise. (jit_unwind_reg_get_impl): Likewise. * jv-exp.y (QualifiedName): Likewise. * jv-lang.c (get_java_utf8_name): Likewise. (type_from_class): Likewise. (java_demangle_type_signature): Likewise. (java_class_name_from_physname): Likewise. * jv-typeprint.c (java_type_print_base): Likewise. * jv-valprint.c (java_value_print): Likewise. * language.c (add_language): Likewise. * linespec.c (add_sal_to_sals_basic): Likewise. (add_sal_to_sals): Likewise. (decode_objc): Likewise. (find_linespec_symbols): Likewise. * linux-fork.c (fork_save_infrun_state): Likewise. * linux-nat.c (linux_nat_detach): Likewise. (linux_nat_fileio_readlink): Likewise. * linux-record.c (record_linux_sockaddr): Likewise. (record_linux_msghdr): Likewise. (Do): Likewise. * linux-tdep.c (linux_core_info_proc_mappings): Likewise. (linux_collect_regset_section_cb): Likewise. (linux_get_siginfo_data): Likewise. * linux-thread-db.c (try_thread_db_load_from_pdir_1): Likewise. (try_thread_db_load_from_dir): Likewise. (thread_db_load_search): Likewise. (info_auto_load_libthread_db): Likewise. * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise. (m32c_m16c_pointer_to_address): Likewise. * m68hc11-tdep.c (m68hc11_pseudo_register_write): Likewise. * m68k-tdep.c (m68k_get_longjmp_target): Likewise. * machoread.c (macho_check_dsym): Likewise. * macroexp.c (resize_buffer): Likewise. (gather_arguments): Likewise. (maybe_expand): Likewise. * macrotab.c (new_macro_key): Likewise. (new_source_file): Likewise. (new_macro_definition): Likewise. * mdebugread.c (parse_symbol): Likewise. (parse_type): Likewise. (parse_partial_symbols): Likewise. (psymtab_to_symtab_1): Likewise. * mem-break.c (default_memory_insert_breakpoint): Likewise. * mi/mi-cmd-break.c (mi_argv_to_format): Likewise. * mi/mi-main.c (mi_cmd_data_read_memory): Likewise. (mi_cmd_data_read_memory_bytes): Likewise. (mi_cmd_data_write_memory_bytes): Likewise. (mi_cmd_trace_frame_collected): Likewise. * mi/mi-parse.c (mi_parse_argv): Likewise. (mi_parse): Likewise. * minidebug.c (lzma_open): Likewise. (lzma_pread): Likewise. * mips-tdep.c (mips_read_fp_register_single): Likewise. (mips_print_fp_register): Likewise. * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Likewise. * mipsread.c (read_alphacoff_dynamic_symtab): Likewise. * mt-tdep.c (mt_register_name): Likewise. (mt_registers_info): Likewise. (mt_push_dummy_call): Likewise. * namespace.c (add_using_directive): Likewise. * nat/linux-btrace.c (perf_event_read): Likewise. (linux_enable_bts): Likewise. * nat/linux-osdata.c (linux_common_core_of_thread): Likewise. * nat/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Likewise. * nto-tdep.c (nto_find_and_open_solib): Likewise. (nto_parse_redirection): Likewise. * objc-lang.c (objc_demangle): Likewise. (find_methods): Likewise. * objfiles.c (get_objfile_bfd_data): Likewise. (set_objfile_main_name): Likewise. (allocate_objfile): Likewise. (objfile_relocate): Likewise. (update_section_map): Likewise. * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Likewise. * p-exp.y (exp): Likewise. (yylex): Likewise. * p-valprint.c (pascal_object_print_value): Likewise. * parse.c (initialize_expout): Likewise. (mark_completion_tag): Likewise. (copy_name): Likewise. (parse_float): Likewise. (type_stack_reserve): Likewise. * ppc-linux-tdep.c (ppc_stap_parse_special_token): Likewise. (ppu2spu_prev_register): Likewise. * ppc-ravenscar-thread.c (supply_register_at_address): Likewise. * printcmd.c (printf_wide_c_string): Likewise. (printf_pointer): Likewise. * probe.c (parse_probes): Likewise. * python/py-cmd.c (gdbpy_parse_command_name): Likewise. (cmdpy_init): Likewise. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Likewise. * python/py-symtab.c (set_sal): Likewise. * python/py-unwind.c (pyuw_sniffer): Likewise. * python/python.c (python_interactive_command): Likewise. (compute_python_string): Likewise. * ravenscar-thread.c (get_running_thread_id): Likewise. * record-full.c (record_full_exec_insn): Likewise. (record_full_core_open_1): Likewise. * regcache.c (regcache_raw_read_signed): Likewise. (regcache_raw_read_unsigned): Likewise. (regcache_cooked_read_signed): Likewise. (regcache_cooked_read_unsigned): Likewise. * remote-fileio.c (remote_fileio_func_open): Likewise. (remote_fileio_func_rename): Likewise. (remote_fileio_func_unlink): Likewise. (remote_fileio_func_stat): Likewise. (remote_fileio_func_system): Likewise. * remote-mips.c (mips_xfer_memory): Likewise. (mips_load_srec): Likewise. (pmon_end_download): Likewise. * remote.c (new_remote_state): Likewise. (map_regcache_remote_table): Likewise. (remote_register_number_and_offset): Likewise. (init_remote_state): Likewise. (get_memory_packet_size): Likewise. (remote_pass_signals): Likewise. (remote_program_signals): Likewise. (remote_start_remote): Likewise. (remote_check_symbols): Likewise. (remote_query_supported): Likewise. (extended_remote_attach): Likewise. (process_g_packet): Likewise. (store_registers_using_G): Likewise. (putpkt_binary): Likewise. (read_frame): Likewise. (compare_sections_command): Likewise. (remote_hostio_pread): Likewise. (remote_hostio_readlink): Likewise. (remote_file_put): Likewise. (remote_file_get): Likewise. (remote_pid_to_exec_file): Likewise. (_initialize_remote): Likewise. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. * rs6000-tdep.c (ppc_displaced_step_copy_insn): Likewise. (bfd_uses_spe_extensions): Likewise. * s390-linux-tdep.c (s390_displaced_step_copy_insn): Likewise. * score-tdep.c (score7_malloc_and_get_memblock): Likewise. * solib-dsbt.c (decode_loadmap): Likewise. (fetch_loadmap): Likewise. (scan_dyntag): Likewise. (enable_break): Likewise. (dsbt_relocate_main_executable): Likewise. * solib-frv.c (fetch_loadmap): Likewise. (enable_break2): Likewise. (frv_relocate_main_executable): Likewise. * solib-spu.c (spu_relocate_main_executable): Likewise. (spu_bfd_open): Likewise. * solib-svr4.c (lm_info_read): Likewise. (read_program_header): Likewise. (find_program_interpreter): Likewise. (scan_dyntag): Likewise. (elf_locate_base): Likewise. (open_symbol_file_object): Likewise. (read_program_headers_from_bfd): Likewise. (svr4_relocate_main_executable): Likewise. * solib-target.c (solib_target_relocate_section_addresses): Likewise. * solib.c (solib_find_1): Likewise. (exec_file_find): Likewise. (solib_find): Likewise. * source.c (openp): Likewise. (print_source_lines_base): Likewise. (forward_search_command): Likewise. * sparc-ravenscar-thread.c (supply_register_at_address): Likewise. * spu-tdep.c (spu2ppu_prev_register): Likewise. (spu_get_overlay_table): Likewise. * stabsread.c (patch_block_stabs): Likewise. (define_symbol): Likewise. (again:): Likewise. (read_member_functions): Likewise. (read_one_struct_field): Likewise. (read_enum_type): Likewise. (common_block_start): Likewise. * stack.c (read_frame_arg): Likewise. (backtrace_command): Likewise. * stap-probe.c (stap_parse_register_operand): Likewise. * symfile.c (syms_from_objfile_1): Likewise. (find_separate_debug_file): Likewise. (load_command): Likewise. (load_progress): Likewise. (load_section_callback): Likewise. (reread_symbols): Likewise. (add_filename_language): Likewise. (allocate_compunit_symtab): Likewise. (read_target_long_array): Likewise. (simple_read_overlay_table): Likewise. * symtab.c (symbol_set_names): Likewise. (resize_symbol_cache): Likewise. (rbreak_command): Likewise. (completion_list_add_name): Likewise. (completion_list_objc_symbol): Likewise. (add_filename_to_list): Likewise. * target-descriptions.c (maint_print_c_tdesc_cmd): Likewise. * target-memory.c (target_write_memory_blocks): Likewise. * target.c (target_read_string): Likewise. (read_whatever_is_readable): Likewise. (target_read_alloc_1): Likewise. (simple_search_memory): Likewise. (target_fileio_read_alloc_1): Likewise. * tilegx-tdep.c (tilegx_push_dummy_call): Likewise. * top.c (command_line_input): Likewise. * tracefile-tfile.c (tfile_fetch_registers): Likewise. * tracefile.c (tracefile_fetch_registers): Likewise. * tracepoint.c (add_memrange): Likewise. (init_collection_list): Likewise. (add_aexpr): Likewise. (trace_dump_actions): Likewise. (parse_trace_status): Likewise. (parse_tracepoint_definition): Likewise. (parse_tsv_definition): Likewise. (parse_static_tracepoint_marker_definition): Likewise. * tui/tui-file.c (tui_sfileopen): Likewise. (tui_file_adjust_strbuf): Likewise. * tui/tui-io.c (tui_expand_tabs): Likewise. * tui/tui-source.c (tui_set_source_content): Likewise. * typeprint.c (find_global_typedef): Likewise. * ui-file.c (do_ui_file_xstrdup): Likewise. (ui_file_obsavestring): Likewise. (mem_file_write): Likewise. * utils.c (make_hex_string): Likewise. (get_regcomp_error): Likewise. (puts_filtered_tabular): Likewise. (gdb_realpath_keepfile): Likewise. (ldirname): Likewise. (gdb_bfd_errmsg): Likewise. (substitute_path_component): Likewise. * valops.c (search_struct_method): Likewise. (find_oload_champ_namespace_loop): Likewise. * valprint.c (print_decimal_chars): Likewise. (read_string): Likewise. (generic_emit_char): Likewise. * varobj.c (varobj_delete): Likewise. (varobj_value_get_print_value): Likewise. * vaxobsd-tdep.c (vaxobsd_sigtramp_sniffer): Likewise. * windows-tdep.c (display_one_tib): Likewise. * xcoffread.c (read_xcoff_symtab): Likewise. (process_xcoff_symbol): Likewise. (swap_sym): Likewise. (scan_xcoff_symtab): Likewise. (xcoff_initial_scan): Likewise. * xml-support.c (gdb_xml_end_element): Likewise. (xml_process_xincludes): Likewise. (xml_fetch_content_from_file): Likewise. * xml-syscall.c (xml_list_of_syscalls): Likewise. * xstormy16-tdep.c (xstormy16_push_dummy_call): Likewise. gdb/gdbserver/ChangeLog: * ax.c (gdb_parse_agent_expr): Add cast to allocation result assignment. (gdb_unparse_agent_expr): Likewise. * hostio.c (require_data): Likewise. (handle_pread): Likewise. * linux-low.c (disable_regset): Likewise. (fetch_register): Likewise. (store_register): Likewise. (get_dynamic): Likewise. (linux_qxfer_libraries_svr4): Likewise. * mem-break.c (delete_fast_tracepoint_jump): Likewise. (set_fast_tracepoint_jump): Likewise. (uninsert_fast_tracepoint_jumps_at): Likewise. (reinsert_fast_tracepoint_jumps_at): Likewise. (validate_inserted_breakpoint): Likewise. (clone_agent_expr): Likewise. * regcache.c (init_register_cache): Likewise. * remote-utils.c (putpkt_binary_1): Likewise. (decode_M_packet): Likewise. (decode_X_packet): Likewise. (look_up_one_symbol): Likewise. (relocate_instruction): Likewise. (monitor_output): Likewise. * server.c (handle_search_memory): Likewise. (handle_qxfer_exec_file): Likewise. (handle_qxfer_libraries): Likewise. (handle_qxfer): Likewise. (handle_query): Likewise. (handle_v_cont): Likewise. (handle_v_run): Likewise. (captured_main): Likewise. * target.c (write_inferior_memory): Likewise. * thread-db.c (try_thread_db_load_from_dir): Likewise. * tracepoint.c (init_trace_buffer): Likewise. (add_tracepoint_action): Likewise. (add_traceframe): Likewise. (add_traceframe_block): Likewise. (cmd_qtdpsrc): Likewise. (cmd_qtdv): Likewise. (cmd_qtstatus): Likewise. (response_source): Likewise. (response_tsv): Likewise. (cmd_qtnotes): Likewise. (gdb_collect): Likewise. (initialize_tracepoint): Likewise.
2015-09-25 20:08:06 +02:00
alloc_len = (strlen (debug_file_directory)
+ (sizeof "/.build-id/" - 1) + 1
+ 2 * build_id_len + (sizeof ".debug" - 1) + 1);
link = (char *) alloca (alloc_len);
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
/* Keep backward compatibility so that DEBUG_FILE_DIRECTORY being "" will
cause "/.build-id/..." lookups. */
debugdir_vec = dirnames_to_char_ptr_vec (debug_file_directory);
back_to = make_cleanup_free_char_ptr_vec (debugdir_vec);
for (ix = 0; VEC_iterate (char_ptr, debugdir_vec, ix, debugdir); ++ix)
{
size_t debugdir_len = strlen (debugdir);
const gdb_byte *data = build_id;
size_t size = build_id_len;
char *s;
char *filename = NULL;
struct cleanup *inner;
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
memcpy (link, debugdir, debugdir_len);
s = &link[debugdir_len];
s += sprintf (s, "/.build-id/");
if (size > 0)
{
size--;
s += sprintf (s, "%02x", (unsigned) *data++);
}
if (size > 0)
*s++ = '/';
while (size-- > 0)
s += sprintf (s, "%02x", (unsigned) *data++);
strcpy (s, ".debug");
/* lrealpath() is expensive even for the usually non-existent files. */
if (access (link, F_OK) == 0)
filename = lrealpath (link);
if (filename == NULL)
continue;
/* We expect to be silent on the non-existing files. */
inner = make_cleanup (xfree, filename);
Convert "remote:" sysroots to "target:" and remove "remote:" The functionality of "target:" sysroots is a superset of the functionality of "remote:" sysroots. This commit causes the "set sysroot" command to rewrite "remote:" sysroots as "target:" sysroots and replaces "remote:" specific code with "target:" specific code where still necessary. gdb/ChangeLog: * remote.h (REMOTE_SYSROOT_PREFIX): Remove definition. (remote_filename_p): Remove declaration. (remote_bfd_open): Likewise. * remote.c (remote_bfd_iovec_open): Remove function. (remote_bfd_iovec_close): Likewise. (remote_bfd_iovec_pread): Likewise. (remote_bfd_iovec_stat): Likewise. (remote_filename_p): Likewise. (remote_bfd_open): Likewise. * symfile.h (gdb_bfd_open_maybe_remote): Remove declaration. * symfile.c (separate_debug_file_exists): Use gdb_bfd_open. (gdb_bfd_open_maybe_remote): Remove function. (symfile_bfd_open): Replace remote filename check with target filename check. (reread_symbols): Use gdb_bfd_open. * build-id.c (gdbcore.h): New include. (build_id_to_debug_bfd): Use gdb_bfd_open. * infcmd.c (attach_command_post_wait): Remove remote filename check. * solib.c (solib_find): Replace remote-specific handling with target-specific handling. Update comments where necessary. (solib_bfd_open): Replace remote-specific handling with target-specific handling. (gdb_sysroot_changed): New function. (_initialize_solib): Call the above when gdb_sysroot changes. * windows-tdep.c (gdbcore.h): New include. (windows_xfer_shared_library): Use gdb_bfd_open.
2015-04-02 14:38:29 +02:00
abfd = gdb_bfd_open (filename, gnutarget, -1);
do_cleanups (inner);
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
if (abfd == NULL)
continue;
Use class to manage BFD reference counts This introduces a new specialization of gdb::ref_ptr that can be used to manage BFD reference counts. Then it changes most places in gdb to use this new class, rather than explicit reference-counting or cleanups. This patch removes make_cleanup_bfd_unref. If you look you will see a couple of spots using "release" where a use of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next patch. I think this patch fixes some latent bugs. For example, it seems to me that previously objfpy_add_separate_debug_file leaked a BFD. I'm not 100% certain that the macho_symfile_read_all_oso change is correct. The existing code here is hard for me to follow. One goal of this sort of automated reference counting, though, is to make it more difficult to make logic errors; so hopefully the code is clear now. 2017-01-10 Tom Tromey <tom@tromey.com> * windows-tdep.c (windows_xfer_shared_library): Update. * windows-nat.c (windows_make_so): Update. * utils.h (make_cleanup_bfd_unref): Remove. * utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove. * symfile.h (symfile_bfd_open) (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * symfile.c (read_symbols, symbol_file_add) (separate_debug_file_exists): Update. (symfile_bfd_open): Return gdb_bfd_ref_ptr. (generic_load, reread_symbols): Update. * symfile-mem.c (symbol_file_add_from_memory): Update. * spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr. (spu_symbol_file_add_from_memory): Update. * solist.h (struct target_so_ops) <bfd_open>: Return gdb_bfd_ref_ptr. (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. * solib.c (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. (solib_map_sections, reload_shared_libraries_1): Update. * solib-svr4.c (enable_break): Update. * solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr. * solib-frv.c (enable_break2): Update. * solib-dsbt.c (enable_break): Update. * solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return gdb_bfd_ref_ptr. (darwin_solib_get_all_image_info_addr_at_init): Update. (darwin_bfd_open): Return gdb_bfd_ref_ptr. * solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr. * record-full.c (record_full_save): Update. * python/py-objfile.c (objfpy_add_separate_debug_file): Update. * procfs.c (insert_dbx_link_bpt_in_file): Update. * minidebug.c (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * machoread.c (macho_add_oso_symfile): Change abfd to gdb_bfd_ref_ptr. (macho_symfile_read_all_oso): Update. (macho_check_dsym): Return gdb_bfd_ref_ptr. (macho_symfile_read): Update. * jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr. (jit_bfd_try_read_symtab): Update. * gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. (gdb_bfd_ref_policy): New struct. (gdb_bfd_ref_ptr): New typedef. * gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. * gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr. * gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr. (gcore_command): Update. * exec.c (exec_file_attach): Update. * elfread.c (elf_symfile_read): Update. * dwarf2read.c (dwarf2_get_dwz_file): Update. (try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr. (open_and_init_dwo_file): Update. (open_dwp_file): Return gdb_bfd_ref_ptr. (open_and_init_dwp_file): Update. * corelow.c (core_open): Update. * compile/compile-object-load.c (compile_object_load): Update. * common/gdb_ref_ptr.h (ref_ptr::operator->): New operator. * coffread.c (coff_symfile_read): Update. * cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return gdb_bfd_ref_ptr. Rename. (dump_bfd_file, restore_command): Update. * build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. * build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. (find_separate_debug_file_by_buildid): Update.
2016-11-21 19:12:23 +01:00
if (build_id_verify (abfd.get(), build_id_len, build_id))
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
break;
Use class to manage BFD reference counts This introduces a new specialization of gdb::ref_ptr that can be used to manage BFD reference counts. Then it changes most places in gdb to use this new class, rather than explicit reference-counting or cleanups. This patch removes make_cleanup_bfd_unref. If you look you will see a couple of spots using "release" where a use of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next patch. I think this patch fixes some latent bugs. For example, it seems to me that previously objfpy_add_separate_debug_file leaked a BFD. I'm not 100% certain that the macho_symfile_read_all_oso change is correct. The existing code here is hard for me to follow. One goal of this sort of automated reference counting, though, is to make it more difficult to make logic errors; so hopefully the code is clear now. 2017-01-10 Tom Tromey <tom@tromey.com> * windows-tdep.c (windows_xfer_shared_library): Update. * windows-nat.c (windows_make_so): Update. * utils.h (make_cleanup_bfd_unref): Remove. * utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove. * symfile.h (symfile_bfd_open) (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * symfile.c (read_symbols, symbol_file_add) (separate_debug_file_exists): Update. (symfile_bfd_open): Return gdb_bfd_ref_ptr. (generic_load, reread_symbols): Update. * symfile-mem.c (symbol_file_add_from_memory): Update. * spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr. (spu_symbol_file_add_from_memory): Update. * solist.h (struct target_so_ops) <bfd_open>: Return gdb_bfd_ref_ptr. (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. * solib.c (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. (solib_map_sections, reload_shared_libraries_1): Update. * solib-svr4.c (enable_break): Update. * solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr. * solib-frv.c (enable_break2): Update. * solib-dsbt.c (enable_break): Update. * solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return gdb_bfd_ref_ptr. (darwin_solib_get_all_image_info_addr_at_init): Update. (darwin_bfd_open): Return gdb_bfd_ref_ptr. * solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr. * record-full.c (record_full_save): Update. * python/py-objfile.c (objfpy_add_separate_debug_file): Update. * procfs.c (insert_dbx_link_bpt_in_file): Update. * minidebug.c (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * machoread.c (macho_add_oso_symfile): Change abfd to gdb_bfd_ref_ptr. (macho_symfile_read_all_oso): Update. (macho_check_dsym): Return gdb_bfd_ref_ptr. (macho_symfile_read): Update. * jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr. (jit_bfd_try_read_symtab): Update. * gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. (gdb_bfd_ref_policy): New struct. (gdb_bfd_ref_ptr): New typedef. * gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. * gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr. * gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr. (gcore_command): Update. * exec.c (exec_file_attach): Update. * elfread.c (elf_symfile_read): Update. * dwarf2read.c (dwarf2_get_dwz_file): Update. (try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr. (open_and_init_dwo_file): Update. (open_dwp_file): Return gdb_bfd_ref_ptr. (open_and_init_dwp_file): Update. * corelow.c (core_open): Update. * compile/compile-object-load.c (compile_object_load): Update. * common/gdb_ref_ptr.h (ref_ptr::operator->): New operator. * coffread.c (coff_symfile_read): Update. * cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return gdb_bfd_ref_ptr. Rename. (dump_bfd_file, restore_command): Update. * build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. * build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. (find_separate_debug_file_by_buildid): Update.
2016-11-21 19:12:23 +01:00
abfd.release ();
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
}
do_cleanups (back_to);
return abfd;
}
/* See build-id.h. */
char *
find_separate_debug_file_by_buildid (struct objfile *objfile)
{
Allow gdb to find debug symbols file by build-id for PE file format also This promotes BFD's struct elf_build_id to the generic struct bfd_build_id, populated when an ELF or PE BFD is read. gdb is updated to use that, and to use the build-id to find symbols for PE files also. There is currently no generic way to extract the build-id from an object file, perhaps an option to objdump to do this might make sense? On x86_64-pc-cygwin, gdb's sepdebug.exp changes: -# of unsupported tests 1 +# of expected passes 90 I don't seem to get consistent testsuite runs on i686-linux-gnu, but there don't appear to be any regressions. bfd/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * elf-bfd.h : Remove struct elf_build_id. * bfd.c : Add struct bfd_build_id. * bfd-in2.h: Regenerate. * elf.c (elfobj_grok_gnu_build_id): Update to use bfd_build_id. * libpei.h: Add protoype and macros for bfd_XXi_slurp_codeview_record. * peXXigen.c (_bfd_XXi_slurp_codeview_record): Make public * peicode.h (pe_bfd_read_buildid): Add. (pe_bfd_object_p): Use pe_bfd_read_buildid(). gdb/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * build-id.c: Don't include elf-bfd.h. (build_id_bfd_get): Use bfd_build_id. (build_id_verify): Ditto. * build-id.h: Ditto. (find_separate_debug_file_by_buildid): Ditto. * python/py-objfile.c: Don't include elf-bfd.h. (objfpy_get_build_id) Use bfd_build_id. (objfpy_build_id_matches, objfpy_lookup_objfile_by_build_id): Ditto. * coffread.c: Include build-id.h. (coff_symfile_read): Try find_separate_debug_file_by_buildid. gdb/doc/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.texinfo (Separate Debug Files): Document that PE is also supported. gdb/testsuite/ChangeLog: 2015-06-10 Jon Turney <jon.turney@dronecode.org.uk> * gdb.base/sepdebug.exp: Add EXEEXT where needed. * lib/gdb.exp (get_build_id): Teach how to extract build-id from a PE file. * lib/future.exp (gdb_find_objdump): Add gdb_find_objdump. Signed-off-by: Jon Turney <jon.turney@dronecode.org.uk>
2015-04-07 21:49:08 +02:00
const struct bfd_build_id *build_id;
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
build_id = build_id_bfd_get (objfile->obfd);
if (build_id != NULL)
{
Use class to manage BFD reference counts This introduces a new specialization of gdb::ref_ptr that can be used to manage BFD reference counts. Then it changes most places in gdb to use this new class, rather than explicit reference-counting or cleanups. This patch removes make_cleanup_bfd_unref. If you look you will see a couple of spots using "release" where a use of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next patch. I think this patch fixes some latent bugs. For example, it seems to me that previously objfpy_add_separate_debug_file leaked a BFD. I'm not 100% certain that the macho_symfile_read_all_oso change is correct. The existing code here is hard for me to follow. One goal of this sort of automated reference counting, though, is to make it more difficult to make logic errors; so hopefully the code is clear now. 2017-01-10 Tom Tromey <tom@tromey.com> * windows-tdep.c (windows_xfer_shared_library): Update. * windows-nat.c (windows_make_so): Update. * utils.h (make_cleanup_bfd_unref): Remove. * utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove. * symfile.h (symfile_bfd_open) (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * symfile.c (read_symbols, symbol_file_add) (separate_debug_file_exists): Update. (symfile_bfd_open): Return gdb_bfd_ref_ptr. (generic_load, reread_symbols): Update. * symfile-mem.c (symbol_file_add_from_memory): Update. * spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr. (spu_symbol_file_add_from_memory): Update. * solist.h (struct target_so_ops) <bfd_open>: Return gdb_bfd_ref_ptr. (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. * solib.c (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. (solib_map_sections, reload_shared_libraries_1): Update. * solib-svr4.c (enable_break): Update. * solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr. * solib-frv.c (enable_break2): Update. * solib-dsbt.c (enable_break): Update. * solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return gdb_bfd_ref_ptr. (darwin_solib_get_all_image_info_addr_at_init): Update. (darwin_bfd_open): Return gdb_bfd_ref_ptr. * solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr. * record-full.c (record_full_save): Update. * python/py-objfile.c (objfpy_add_separate_debug_file): Update. * procfs.c (insert_dbx_link_bpt_in_file): Update. * minidebug.c (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * machoread.c (macho_add_oso_symfile): Change abfd to gdb_bfd_ref_ptr. (macho_symfile_read_all_oso): Update. (macho_check_dsym): Return gdb_bfd_ref_ptr. (macho_symfile_read): Update. * jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr. (jit_bfd_try_read_symtab): Update. * gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. (gdb_bfd_ref_policy): New struct. (gdb_bfd_ref_ptr): New typedef. * gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. * gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr. * gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr. (gcore_command): Update. * exec.c (exec_file_attach): Update. * elfread.c (elf_symfile_read): Update. * dwarf2read.c (dwarf2_get_dwz_file): Update. (try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr. (open_and_init_dwo_file): Update. (open_dwp_file): Return gdb_bfd_ref_ptr. (open_and_init_dwp_file): Update. * corelow.c (core_open): Update. * compile/compile-object-load.c (compile_object_load): Update. * common/gdb_ref_ptr.h (ref_ptr::operator->): New operator. * coffread.c (coff_symfile_read): Update. * cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return gdb_bfd_ref_ptr. Rename. (dump_bfd_file, restore_command): Update. * build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. * build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. (find_separate_debug_file_by_buildid): Update.
2016-11-21 19:12:23 +01:00
gdb_bfd_ref_ptr abfd (build_id_to_debug_bfd (build_id->size,
build_id->data));
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
/* Prevent looping on a stripped .debug file. */
if (abfd != NULL
Use class to manage BFD reference counts This introduces a new specialization of gdb::ref_ptr that can be used to manage BFD reference counts. Then it changes most places in gdb to use this new class, rather than explicit reference-counting or cleanups. This patch removes make_cleanup_bfd_unref. If you look you will see a couple of spots using "release" where a use of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next patch. I think this patch fixes some latent bugs. For example, it seems to me that previously objfpy_add_separate_debug_file leaked a BFD. I'm not 100% certain that the macho_symfile_read_all_oso change is correct. The existing code here is hard for me to follow. One goal of this sort of automated reference counting, though, is to make it more difficult to make logic errors; so hopefully the code is clear now. 2017-01-10 Tom Tromey <tom@tromey.com> * windows-tdep.c (windows_xfer_shared_library): Update. * windows-nat.c (windows_make_so): Update. * utils.h (make_cleanup_bfd_unref): Remove. * utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove. * symfile.h (symfile_bfd_open) (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * symfile.c (read_symbols, symbol_file_add) (separate_debug_file_exists): Update. (symfile_bfd_open): Return gdb_bfd_ref_ptr. (generic_load, reread_symbols): Update. * symfile-mem.c (symbol_file_add_from_memory): Update. * spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr. (spu_symbol_file_add_from_memory): Update. * solist.h (struct target_so_ops) <bfd_open>: Return gdb_bfd_ref_ptr. (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. * solib.c (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. (solib_map_sections, reload_shared_libraries_1): Update. * solib-svr4.c (enable_break): Update. * solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr. * solib-frv.c (enable_break2): Update. * solib-dsbt.c (enable_break): Update. * solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return gdb_bfd_ref_ptr. (darwin_solib_get_all_image_info_addr_at_init): Update. (darwin_bfd_open): Return gdb_bfd_ref_ptr. * solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr. * record-full.c (record_full_save): Update. * python/py-objfile.c (objfpy_add_separate_debug_file): Update. * procfs.c (insert_dbx_link_bpt_in_file): Update. * minidebug.c (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * machoread.c (macho_add_oso_symfile): Change abfd to gdb_bfd_ref_ptr. (macho_symfile_read_all_oso): Update. (macho_check_dsym): Return gdb_bfd_ref_ptr. (macho_symfile_read): Update. * jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr. (jit_bfd_try_read_symtab): Update. * gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. (gdb_bfd_ref_policy): New struct. (gdb_bfd_ref_ptr): New typedef. * gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. * gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr. * gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr. (gcore_command): Update. * exec.c (exec_file_attach): Update. * elfread.c (elf_symfile_read): Update. * dwarf2read.c (dwarf2_get_dwz_file): Update. (try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr. (open_and_init_dwo_file): Update. (open_dwp_file): Return gdb_bfd_ref_ptr. (open_and_init_dwp_file): Update. * corelow.c (core_open): Update. * compile/compile-object-load.c (compile_object_load): Update. * common/gdb_ref_ptr.h (ref_ptr::operator->): New operator. * coffread.c (coff_symfile_read): Update. * cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return gdb_bfd_ref_ptr. Rename. (dump_bfd_file, restore_command): Update. * build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. * build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. (find_separate_debug_file_by_buildid): Update.
2016-11-21 19:12:23 +01:00
&& filename_cmp (bfd_get_filename (abfd.get ()),
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
objfile_name (objfile)) == 0)
Use class to manage BFD reference counts This introduces a new specialization of gdb::ref_ptr that can be used to manage BFD reference counts. Then it changes most places in gdb to use this new class, rather than explicit reference-counting or cleanups. This patch removes make_cleanup_bfd_unref. If you look you will see a couple of spots using "release" where a use of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next patch. I think this patch fixes some latent bugs. For example, it seems to me that previously objfpy_add_separate_debug_file leaked a BFD. I'm not 100% certain that the macho_symfile_read_all_oso change is correct. The existing code here is hard for me to follow. One goal of this sort of automated reference counting, though, is to make it more difficult to make logic errors; so hopefully the code is clear now. 2017-01-10 Tom Tromey <tom@tromey.com> * windows-tdep.c (windows_xfer_shared_library): Update. * windows-nat.c (windows_make_so): Update. * utils.h (make_cleanup_bfd_unref): Remove. * utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove. * symfile.h (symfile_bfd_open) (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * symfile.c (read_symbols, symbol_file_add) (separate_debug_file_exists): Update. (symfile_bfd_open): Return gdb_bfd_ref_ptr. (generic_load, reread_symbols): Update. * symfile-mem.c (symbol_file_add_from_memory): Update. * spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr. (spu_symbol_file_add_from_memory): Update. * solist.h (struct target_so_ops) <bfd_open>: Return gdb_bfd_ref_ptr. (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. * solib.c (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. (solib_map_sections, reload_shared_libraries_1): Update. * solib-svr4.c (enable_break): Update. * solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr. * solib-frv.c (enable_break2): Update. * solib-dsbt.c (enable_break): Update. * solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return gdb_bfd_ref_ptr. (darwin_solib_get_all_image_info_addr_at_init): Update. (darwin_bfd_open): Return gdb_bfd_ref_ptr. * solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr. * record-full.c (record_full_save): Update. * python/py-objfile.c (objfpy_add_separate_debug_file): Update. * procfs.c (insert_dbx_link_bpt_in_file): Update. * minidebug.c (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * machoread.c (macho_add_oso_symfile): Change abfd to gdb_bfd_ref_ptr. (macho_symfile_read_all_oso): Update. (macho_check_dsym): Return gdb_bfd_ref_ptr. (macho_symfile_read): Update. * jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr. (jit_bfd_try_read_symtab): Update. * gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. (gdb_bfd_ref_policy): New struct. (gdb_bfd_ref_ptr): New typedef. * gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. * gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr. * gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr. (gcore_command): Update. * exec.c (exec_file_attach): Update. * elfread.c (elf_symfile_read): Update. * dwarf2read.c (dwarf2_get_dwz_file): Update. (try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr. (open_and_init_dwo_file): Update. (open_dwp_file): Return gdb_bfd_ref_ptr. (open_and_init_dwp_file): Update. * corelow.c (core_open): Update. * compile/compile-object-load.c (compile_object_load): Update. * common/gdb_ref_ptr.h (ref_ptr::operator->): New operator. * coffread.c (coff_symfile_read): Update. * cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return gdb_bfd_ref_ptr. Rename. (dump_bfd_file, restore_command): Update. * build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. * build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. (find_separate_debug_file_by_buildid): Update.
2016-11-21 19:12:23 +01:00
warning (_("\"%s\": separate debug info file has no debug info"),
bfd_get_filename (abfd.get ()));
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
else if (abfd != NULL)
Use class to manage BFD reference counts This introduces a new specialization of gdb::ref_ptr that can be used to manage BFD reference counts. Then it changes most places in gdb to use this new class, rather than explicit reference-counting or cleanups. This patch removes make_cleanup_bfd_unref. If you look you will see a couple of spots using "release" where a use of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next patch. I think this patch fixes some latent bugs. For example, it seems to me that previously objfpy_add_separate_debug_file leaked a BFD. I'm not 100% certain that the macho_symfile_read_all_oso change is correct. The existing code here is hard for me to follow. One goal of this sort of automated reference counting, though, is to make it more difficult to make logic errors; so hopefully the code is clear now. 2017-01-10 Tom Tromey <tom@tromey.com> * windows-tdep.c (windows_xfer_shared_library): Update. * windows-nat.c (windows_make_so): Update. * utils.h (make_cleanup_bfd_unref): Remove. * utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove. * symfile.h (symfile_bfd_open) (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * symfile.c (read_symbols, symbol_file_add) (separate_debug_file_exists): Update. (symfile_bfd_open): Return gdb_bfd_ref_ptr. (generic_load, reread_symbols): Update. * symfile-mem.c (symbol_file_add_from_memory): Update. * spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr. (spu_symbol_file_add_from_memory): Update. * solist.h (struct target_so_ops) <bfd_open>: Return gdb_bfd_ref_ptr. (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. * solib.c (solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr. (solib_map_sections, reload_shared_libraries_1): Update. * solib-svr4.c (enable_break): Update. * solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr. * solib-frv.c (enable_break2): Update. * solib-dsbt.c (enable_break): Update. * solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return gdb_bfd_ref_ptr. (darwin_solib_get_all_image_info_addr_at_init): Update. (darwin_bfd_open): Return gdb_bfd_ref_ptr. * solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr. * record-full.c (record_full_save): Update. * python/py-objfile.c (objfpy_add_separate_debug_file): Update. * procfs.c (insert_dbx_link_bpt_in_file): Update. * minidebug.c (find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr. * machoread.c (macho_add_oso_symfile): Change abfd to gdb_bfd_ref_ptr. (macho_symfile_read_all_oso): Update. (macho_check_dsym): Return gdb_bfd_ref_ptr. (macho_symfile_read): Update. * jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr. (jit_bfd_try_read_symtab): Update. * gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. (gdb_bfd_ref_policy): New struct. (gdb_bfd_ref_ptr): New typedef. * gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr) (gdb_bfd_openw, gdb_bfd_openr_iovec) (gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return gdb_bfd_ref_ptr. * gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr. * gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr. (gcore_command): Update. * exec.c (exec_file_attach): Update. * elfread.c (elf_symfile_read): Update. * dwarf2read.c (dwarf2_get_dwz_file): Update. (try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr. (open_and_init_dwo_file): Update. (open_dwp_file): Return gdb_bfd_ref_ptr. (open_and_init_dwp_file): Update. * corelow.c (core_open): Update. * compile/compile-object-load.c (compile_object_load): Update. * common/gdb_ref_ptr.h (ref_ptr::operator->): New operator. * coffread.c (coff_symfile_read): Update. * cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return gdb_bfd_ref_ptr. Rename. (dump_bfd_file, restore_command): Update. * build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. * build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr. (find_separate_debug_file_by_buildid): Update.
2016-11-21 19:12:23 +01:00
return xstrdup (bfd_get_filename (abfd.get ()));
fix PR symtab/15597 This patch fixes gdb PR symtab/15597. The bug is that the .gnu_debugaltlink section includes the build-id of the alt file, but gdb does not use it. This patch fixes the problem by changing gdb to do what it ought to always have done: verify the build id of the file found using the filename in .gnu_debugaltlink; and if that does not match, try to find the correct debug file using the build-id and debug-file-directory. This patch touches BFD. Previously, gdb had its own code for parsing .gnu_debugaltlink; I changed it to use the BFD functions after those were introduced. However, the BFD functions are incorrect -- they assume that .gnu_debugaltlink is formatted like .gnu_debuglink. However, it it is not. Instead, it consists of a file name followed by the build-id -- no alignment, and the build-id is not a CRC. Fixing this properly is a bit of a pain. But, because separate_alt_debug_file_exists just has a FIXME for the build-id case, I did not fix it properly. Instead I introduced a hack. This leaves BFD working just as well as it did before my patch. I'm willing to do something better here but I could use some guidance as to what. It seems that the build-id code in BFD is largely punted on. FWIW gdb is the only user of bfd_get_alt_debug_link_info outside of BFD itself. I moved the build-id logic out of elfread.c and into a new file. This seemed cleanest to me. Writing a test case was a bit of a pain. I added a couple new features to the DWARF assembler to handle this. Built and regtested on x86-64 Fedora 18. * bfd-in2.h: Rebuild. * opncls.c (bfd_get_alt_debug_link_info): Add buildid_len parameter. Change type of buildid_out. Update. (get_alt_debug_link_info_shim): New function. (bfd_follow_gnu_debuglink): Use it. * Makefile.in (SFILES): Add build-id.c. (HFILES_NO_SRCDIR): Add build-id.h. * build-id.c: New file, largely from elfread.c. Modified most functions. * build-id.h: New file. * dwarf2read.c (dwarf2_get_dwz_file): Update for change to bfd_get_alt_debug_link_info. Verify dwz file's build-id. Search for dwz file using build-id. * elfread.c (build_id_bfd_get, build_id_verify) (build_id_to_debug_filename, find_separate_debug_file): Remove. * gdb.dwarf2/dwzbuildid.exp: New file. * lib/dwarf.exp (Dwarf::_section): Add "flags" and "type" parameters. (Dwarf::_defer_output): Change "section" parameter to "section_spec"; update. (Dwarf::gnu_debugaltlink, Dwarf::_note, Dwarf::build_id): New procs.
2013-10-08 21:56:15 +02:00
}
return NULL;
}