binutils-gdb/gdb/expprint.c

651 lines
21 KiB
C
Raw Normal View History

1991-03-28 17:26:26 +01:00
/* Print in infix form a struct expression.
Copyright (C) 1986, 1989, 1991 Free Software Foundation, Inc.
1991-03-28 17:26:26 +01:00
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
1991-03-28 17:26:26 +01:00
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
1991-03-28 17:26:26 +01:00
This program is distributed in the hope that it will be useful,
1991-03-28 17:26:26 +01:00
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
* breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET around calls to create_longjmp_breakpoint. Why install the breakpoints if we can't find the longjmp target? * infrun.c (wait_for_inferior): Cleanup comments near call test. * remote-mips.c: Fixed a bunch of prototypes to avoid char/int complaint from picky compilers. Add comment to mips_expect. Replace all instances of sr_get_debug with remote_debug. * (mips_readchar): Don't jam init string to monitor. mips_initialize() handles that. * (mips_receive_header): Print better message when we get too much garbage. * (mips_request): Allow caller to pass in buff to allow them to analyze the returned message. * (mips_initialize): Re-do initialization to try sending a BREAK, a ^C, and then a download escape sequence. Cleanup protocol startup. Eliminate sleeps. Clear breakpoints (if using monitor breakpoints). Re-init frame. * (mips_detach): Close down target. start-sanitize-gm * (mips_resume): Pass signal down to target. * (mips_create_inferior): Start target with TARGET_SIGNAL_PWR. end-sanitize-gm * (mips_wait): Handle return status with registers, or breakpoint stuff. * (mips_kill): Add ^C handling. * (mips_insert_breakpoint mips_remove_breakpoint): Call new breakpoint stuff if enabled. * (calculate_mask remote_mips_set_watchpoint remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint): Hardware watchpoint/breakpoint stuff. * (common_breakpoint): Common code for new monitor breakpoint commands. * (mips_load): Don't use `prompt'. It's a global variable. * top.c (dont_repeat_command): New command for use in user-defined commands to suppress auto-repeat (by hittin return key). start-sanitize-gm * utils.c (request_quit): Call target_kill here. Good idea. Needs a better implementation. end-sanitize-gm * valops.c: Add start of auto function-call abandonment capability. start-sanitize-gm * c-exp.y: Add code (currently disabled) to handle GM dynamic structures (it conflicts with @!). * eval.c (evaluate_subexp_standard): ditto. * expprint.c (print_subexp dump_expression): ditto. * expression.h (enum exp_opcode): ditto. * parse.c (length_of_subexp): ditto. * configure, configure.in: Add mip*-*-magic* target. * magic.c magic.h: Special routines to handle GM stuff (like stepping through dispatcher). end-sanitize-gm
1995-10-27 18:48:36 +01:00
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
1991-03-28 17:26:26 +01:00
#include "defs.h"
#include "symtab.h"
#include "gdbtypes.h"
1991-03-28 17:26:26 +01:00
#include "expression.h"
#include "value.h"
#include "language.h"
#include "parser-defs.h"
1991-03-28 17:26:26 +01:00
/* Prototypes for local functions */
static void
print_subexp PARAMS ((struct expression *, int *, GDB_FILE *, enum precedence));
1991-03-28 17:26:26 +01:00
void
print_expression (exp, stream)
struct expression *exp;
GDB_FILE *stream;
1991-03-28 17:26:26 +01:00
{
int pc = 0;
print_subexp (exp, &pc, stream, PREC_NULL);
}
/* Print the subexpression of EXP that starts in position POS, on STREAM.
PREC is the precedence of the surrounding operator;
if the precedence of the main operator of this subexpression is less,
parentheses are needed here. */
static void
print_subexp (exp, pos, stream, prec)
register struct expression *exp;
register int *pos;
GDB_FILE *stream;
1991-03-28 17:26:26 +01:00
enum precedence prec;
{
register unsigned tem;
register const struct op_print *op_print_tab;
1991-03-28 17:26:26 +01:00
register int pc;
unsigned nargs;
register char *op_str;
int assign_modify = 0;
enum exp_opcode opcode;
enum precedence myprec = PREC_NULL;
1991-03-28 17:26:26 +01:00
/* Set to 1 for a right-associative operator. */
int assoc = 0;
value_ptr val;
char *tempstr = NULL;
1991-03-28 17:26:26 +01:00
op_print_tab = exp->language_defn->la_op_print_tab;
1991-03-28 17:26:26 +01:00
pc = (*pos)++;
opcode = exp->elts[pc].opcode;
switch (opcode)
{
/* Common ops */
1991-03-28 17:26:26 +01:00
case OP_SCOPE:
* defs.h (sevenbit_strings): Add declaration. * defs.h (printchar): Replace with gdb_printchar. * language.h (language_defn): Add new function pointers la_printchar and la_printstr, to do language dependent printing of characters and strings. * language.h (local_printchar, local_printstr): New macros to call language dependent functions pointed to by la_printchar and la_printstr respectively. * c-exp.y (emit_char, c_printchar, c_printstr): New language dependent functions for printing characters and strings. * c-exp.y (c_language_defn, cplus_language_defn): Add c_printchar and c_printstr. * command.c (do_setshow_command): Rename printchar use to gdb_printchar. * expprint.c (print_subexp): Replace C style string output with call to local_printstr. * language.c (unk_lang_printchar, unk_lang_printstr): New stubs, currently errors. * language.c (unknown_language_defn, auto_language_defn, local_language_defn): Add unk_lang_printchar and unk_lang_printstr. * m2-exp.y (emit_char, m2_printchar, m2_printstr): New language dependent functions to print characters and strings. * m2-exp.y (m2_language_defn): Add m2_printchar and m2_printstr. * utils.c (printchar): Renamed to gdb_printchar. * valprint.c (print_string): Remove prototype, function moved to c-exp.y, where it becomes c_printstr. * valprint.c (print_max): Made global for reference from the language dependent printing routines in *-exp.y. * valprint.c (repeat_count_threshold): New variable with function of old REPEAT_COUNT_THREHOLD define, but now settable by user. Change all references to old macro to references to new variable. * valprint.c (value_print, val_print): Replace calls to print_string with calls to local_printstr. * valprint.c (val_print): Replace C style character printing with call to local_printchar. * valprint.c (val_print): Add case for TYPE_CODE_CHAR. * valprint.c (_initialize_valprint): Add add_show_from_set call for setting up repeat_count_threshold as print variable. **** start-sanitize-chill **** * ch-exp.y (decode_integer_value): New function. * ch-exp.y (decode_integer_literal): Use decode_integer_value. * ch-exp.y (chill_printchar, chill_printstr): New language dependent functions for printing characters and strings. * ch-exp.y (chill_language_defn): Add chill_printchar and chill_printstr. **** end-sanitize-chill ****
1992-11-21 07:10:08 +01:00
myprec = PREC_PREFIX;
assoc = 0;
fputs_filtered (type_name_no_tag (exp->elts[pc + 1].type), stream);
fputs_filtered ("::", stream);
* Makefile.in (VERSION): Bump to 4.7.4. * Makefile.in (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c, m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c. * Makefile.in (HFILES): Add valprint.h. * Makefile.in (OBS): Add typeprint.o, c-typeprint.o, m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o. * typeprint.c, typeprint.h: New files for language independent type printing functions. * c-typeprint.c, m2-typeprint.c: New files for language dependent type printing functions and definitions. * valprint.h: New include file for language independent value printing definitions. * c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language dependent value printing functions. * c-exp.y (production ptype): Add range_type variable and use new create_range_type function. * c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab), infcmd.c (path_var_name), language.c (unk_op_print_tab), m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * c-exp.y (c_create_fundamental_type): Remove unused nbytes. * c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type, and c_val_print. * c-lang.h (c_print_type, c_val_print): Add prototypes. * coffread.c (decode_type): Add range_type variable and call to new create_range_type function. * complaints.c (complain): Remove unused val variable. * complaints.c (_initialize_complaints): Make it void. * convex-tdep.c (value_of_trapped_internalvar): Add range_type variable and call new create_range_type function. * defs.h (enum val_prettyprint): Move enum from value.h to here so we can avoid having to include value.h just for prototypes that need the enum (thanks ANSI). * dwarfread.c (struct_type): Local anonymous_size variable is only used if !BITS_BIG_ENDIAN. * dwarfread.c (decode_subscript_data_item): Add rangetype variable and call new create_range_type function. * elfread.c (elf_symfile_read): Remove unused dbx and text_sect variables. * eval.c (evaluate_subexp): Remove unused local variable name and the statement with no side effects that initializes it. * expprint.c (print_subexp): Change local_printstr to LA_PRINT_STRING. * gdbtypes.c (create_range_type): New function that creates a range type using code fragments from object file readers as an example of what has to be initialized. * gdbtypes.c (create_array_type): Removed index_type, low_bound, and high_bound parameters, replaced with a single range_type parameter. Change function body to use passed in range_type rather than handcrafting one. * gdbtypes.h (create_range_type): Add prototype. * gdbtypes.h (create_array_type): Change prototype parameters. * infrun.c (normal_stop): Remove unused local variables tem and c. * infrun.c (hook_stop_stub): Return 0 rather than random value. * language.c (unk_lang_print_type, unk_lang_val_print): Add stub functions that call error if called. * language.c (unknown_language_defn, auto_language_defn, local_language_defn): Add initializers unk_lang_print_type and unk_lang_val_print. * language.h (struct language_defn): Reformat for larger comments, add la_print_type and la_val_print members. Add LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING. * m2-lang.c (m2_create_fundamental_type): Remove unused local variable nbytes. * m2-lang.c (m2_language_defn): Add initializers m2_print_type and m2_val_print. * m2-lang.h (m2_print_type, m2_val_print): Add prototypes. * main.c (execute_command): Remove unused local variable cmdlines. * main.c (echo_command), stabsread.c (read_type), printcmd.c (clear_displays), symmisc.c (block_depth), values.c (clear_value_history): Make testing of truth value of assignment result explicit. * mipsread.c (upgrade_type): Update FIXME to include future use of create_range_type. * printcmd.c (ptype_command, ptype_eval, whatis_command, whatis_exp, maintenance_print_type): Move prototypes and functions to new typeprint.c. * printcmd.c (_initialize_printcmd): Move add_com calls for ptype_command and whatis_command to new typeprint.c. * ser-bsd.c (serial_open): Remove unused variable sgttyb. * source.c (find_source_lines): Local variable c only used when LSEEK_NOT_LINEAR is defined. * stabsread.c (read_array_type): Use new create_range_type function. * stabsread.c (read_range_type): Add new index_type variable and call new create_range_type function rather than handcrafting range types. * symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE. * symtab.c (typedef_print usages): Use c_typedef_print, renamed. * symtab.c (type_print_base usages): Use c_type_print_base. * symtab.c (type_print_varspec_prefix usages): Use c_type_print_varspec_prefix. * symtab.c (type_print_method_args usages): Use cp_type_print_method_args. * valprint.c: Completely ripped apart and the fragments used to create c-valprint.c, cp-valprint.c, m2-valprint.c, and valprint.h. Remaining stuff is language independent. * value.h (struct fn_field): Forward declare for prototypes. * value.h (type_print_1): Remove prototype. * value.h (enum val_prettyprint): Moved to defs.h. * value.h (typedef_print): Prototype renamed to c_typedef_print. * value.h (baseclass_offset): Add prototype. **** start-sanitize-chill **** * Makefile.in (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c. * Makefile.in (OBS): Add ch-typeprint.o, ch-valprint.o. * ch-typeprint.c: New file for language dependent type printing. * ch-valprint.c: New file for language dependent value printing. * ch-exp.y (parse_number): Remove prototype and stub function. * ch-exp.y (decode_integer_literal): Removed unused digits and temp variables. * ch-exp.y (convert_float): Completely ifdef out for now. * ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5), ch-lang.c (chill_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * ch-exp.y (yylex): Add unhandled storage class enumeration literals to switch statement for completeness. * ch-lang.c (chill_create_fundamental_types): Remove unused nbytes variable. Change dummy type to 2 bytes to match int. Handle FT_VOID types gratuituously added to chill DWARF by compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR type rather than a one byte TYPE_CODE_INT type. * ch-lang.c (chill_language_defn): Add chill_print_type and chill_val_print. * ch-lang.h (chill_print_type, chill_val_print): Add prototypes. **** end-sanitize-chill ****
1992-12-18 21:21:32 +01:00
nargs = longest_to_int (exp->elts[pc + 2].longconst);
(*pos) += 4 + BYTES_TO_EXP_ELEM (nargs + 1);
* Makefile.in (VERSION): Bump to 4.7.4. * Makefile.in (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c, m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c. * Makefile.in (HFILES): Add valprint.h. * Makefile.in (OBS): Add typeprint.o, c-typeprint.o, m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o. * typeprint.c, typeprint.h: New files for language independent type printing functions. * c-typeprint.c, m2-typeprint.c: New files for language dependent type printing functions and definitions. * valprint.h: New include file for language independent value printing definitions. * c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language dependent value printing functions. * c-exp.y (production ptype): Add range_type variable and use new create_range_type function. * c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab), infcmd.c (path_var_name), language.c (unk_op_print_tab), m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * c-exp.y (c_create_fundamental_type): Remove unused nbytes. * c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type, and c_val_print. * c-lang.h (c_print_type, c_val_print): Add prototypes. * coffread.c (decode_type): Add range_type variable and call to new create_range_type function. * complaints.c (complain): Remove unused val variable. * complaints.c (_initialize_complaints): Make it void. * convex-tdep.c (value_of_trapped_internalvar): Add range_type variable and call new create_range_type function. * defs.h (enum val_prettyprint): Move enum from value.h to here so we can avoid having to include value.h just for prototypes that need the enum (thanks ANSI). * dwarfread.c (struct_type): Local anonymous_size variable is only used if !BITS_BIG_ENDIAN. * dwarfread.c (decode_subscript_data_item): Add rangetype variable and call new create_range_type function. * elfread.c (elf_symfile_read): Remove unused dbx and text_sect variables. * eval.c (evaluate_subexp): Remove unused local variable name and the statement with no side effects that initializes it. * expprint.c (print_subexp): Change local_printstr to LA_PRINT_STRING. * gdbtypes.c (create_range_type): New function that creates a range type using code fragments from object file readers as an example of what has to be initialized. * gdbtypes.c (create_array_type): Removed index_type, low_bound, and high_bound parameters, replaced with a single range_type parameter. Change function body to use passed in range_type rather than handcrafting one. * gdbtypes.h (create_range_type): Add prototype. * gdbtypes.h (create_array_type): Change prototype parameters. * infrun.c (normal_stop): Remove unused local variables tem and c. * infrun.c (hook_stop_stub): Return 0 rather than random value. * language.c (unk_lang_print_type, unk_lang_val_print): Add stub functions that call error if called. * language.c (unknown_language_defn, auto_language_defn, local_language_defn): Add initializers unk_lang_print_type and unk_lang_val_print. * language.h (struct language_defn): Reformat for larger comments, add la_print_type and la_val_print members. Add LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING. * m2-lang.c (m2_create_fundamental_type): Remove unused local variable nbytes. * m2-lang.c (m2_language_defn): Add initializers m2_print_type and m2_val_print. * m2-lang.h (m2_print_type, m2_val_print): Add prototypes. * main.c (execute_command): Remove unused local variable cmdlines. * main.c (echo_command), stabsread.c (read_type), printcmd.c (clear_displays), symmisc.c (block_depth), values.c (clear_value_history): Make testing of truth value of assignment result explicit. * mipsread.c (upgrade_type): Update FIXME to include future use of create_range_type. * printcmd.c (ptype_command, ptype_eval, whatis_command, whatis_exp, maintenance_print_type): Move prototypes and functions to new typeprint.c. * printcmd.c (_initialize_printcmd): Move add_com calls for ptype_command and whatis_command to new typeprint.c. * ser-bsd.c (serial_open): Remove unused variable sgttyb. * source.c (find_source_lines): Local variable c only used when LSEEK_NOT_LINEAR is defined. * stabsread.c (read_array_type): Use new create_range_type function. * stabsread.c (read_range_type): Add new index_type variable and call new create_range_type function rather than handcrafting range types. * symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE. * symtab.c (typedef_print usages): Use c_typedef_print, renamed. * symtab.c (type_print_base usages): Use c_type_print_base. * symtab.c (type_print_varspec_prefix usages): Use c_type_print_varspec_prefix. * symtab.c (type_print_method_args usages): Use cp_type_print_method_args. * valprint.c: Completely ripped apart and the fragments used to create c-valprint.c, cp-valprint.c, m2-valprint.c, and valprint.h. Remaining stuff is language independent. * value.h (struct fn_field): Forward declare for prototypes. * value.h (type_print_1): Remove prototype. * value.h (enum val_prettyprint): Moved to defs.h. * value.h (typedef_print): Prototype renamed to c_typedef_print. * value.h (baseclass_offset): Add prototype. **** start-sanitize-chill **** * Makefile.in (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c. * Makefile.in (OBS): Add ch-typeprint.o, ch-valprint.o. * ch-typeprint.c: New file for language dependent type printing. * ch-valprint.c: New file for language dependent value printing. * ch-exp.y (parse_number): Remove prototype and stub function. * ch-exp.y (decode_integer_literal): Removed unused digits and temp variables. * ch-exp.y (convert_float): Completely ifdef out for now. * ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5), ch-lang.c (chill_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * ch-exp.y (yylex): Add unhandled storage class enumeration literals to switch statement for completeness. * ch-lang.c (chill_create_fundamental_types): Remove unused nbytes variable. Change dummy type to 2 bytes to match int. Handle FT_VOID types gratuituously added to chill DWARF by compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR type rather than a one byte TYPE_CODE_INT type. * ch-lang.c (chill_language_defn): Add chill_print_type and chill_val_print. * ch-lang.h (chill_print_type, chill_val_print): Add prototypes. **** end-sanitize-chill ****
1992-12-18 21:21:32 +01:00
fputs_filtered (&exp->elts[pc + 3].string, stream);
1991-03-28 17:26:26 +01:00
return;
case OP_LONG:
(*pos) += 3;
value_print (value_from_longest (exp->elts[pc + 1].type,
* Makefile.in (VERSION): Bump to 4.7.4. * Makefile.in (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c, m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c. * Makefile.in (HFILES): Add valprint.h. * Makefile.in (OBS): Add typeprint.o, c-typeprint.o, m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o. * typeprint.c, typeprint.h: New files for language independent type printing functions. * c-typeprint.c, m2-typeprint.c: New files for language dependent type printing functions and definitions. * valprint.h: New include file for language independent value printing definitions. * c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language dependent value printing functions. * c-exp.y (production ptype): Add range_type variable and use new create_range_type function. * c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab), infcmd.c (path_var_name), language.c (unk_op_print_tab), m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * c-exp.y (c_create_fundamental_type): Remove unused nbytes. * c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type, and c_val_print. * c-lang.h (c_print_type, c_val_print): Add prototypes. * coffread.c (decode_type): Add range_type variable and call to new create_range_type function. * complaints.c (complain): Remove unused val variable. * complaints.c (_initialize_complaints): Make it void. * convex-tdep.c (value_of_trapped_internalvar): Add range_type variable and call new create_range_type function. * defs.h (enum val_prettyprint): Move enum from value.h to here so we can avoid having to include value.h just for prototypes that need the enum (thanks ANSI). * dwarfread.c (struct_type): Local anonymous_size variable is only used if !BITS_BIG_ENDIAN. * dwarfread.c (decode_subscript_data_item): Add rangetype variable and call new create_range_type function. * elfread.c (elf_symfile_read): Remove unused dbx and text_sect variables. * eval.c (evaluate_subexp): Remove unused local variable name and the statement with no side effects that initializes it. * expprint.c (print_subexp): Change local_printstr to LA_PRINT_STRING. * gdbtypes.c (create_range_type): New function that creates a range type using code fragments from object file readers as an example of what has to be initialized. * gdbtypes.c (create_array_type): Removed index_type, low_bound, and high_bound parameters, replaced with a single range_type parameter. Change function body to use passed in range_type rather than handcrafting one. * gdbtypes.h (create_range_type): Add prototype. * gdbtypes.h (create_array_type): Change prototype parameters. * infrun.c (normal_stop): Remove unused local variables tem and c. * infrun.c (hook_stop_stub): Return 0 rather than random value. * language.c (unk_lang_print_type, unk_lang_val_print): Add stub functions that call error if called. * language.c (unknown_language_defn, auto_language_defn, local_language_defn): Add initializers unk_lang_print_type and unk_lang_val_print. * language.h (struct language_defn): Reformat for larger comments, add la_print_type and la_val_print members. Add LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING. * m2-lang.c (m2_create_fundamental_type): Remove unused local variable nbytes. * m2-lang.c (m2_language_defn): Add initializers m2_print_type and m2_val_print. * m2-lang.h (m2_print_type, m2_val_print): Add prototypes. * main.c (execute_command): Remove unused local variable cmdlines. * main.c (echo_command), stabsread.c (read_type), printcmd.c (clear_displays), symmisc.c (block_depth), values.c (clear_value_history): Make testing of truth value of assignment result explicit. * mipsread.c (upgrade_type): Update FIXME to include future use of create_range_type. * printcmd.c (ptype_command, ptype_eval, whatis_command, whatis_exp, maintenance_print_type): Move prototypes and functions to new typeprint.c. * printcmd.c (_initialize_printcmd): Move add_com calls for ptype_command and whatis_command to new typeprint.c. * ser-bsd.c (serial_open): Remove unused variable sgttyb. * source.c (find_source_lines): Local variable c only used when LSEEK_NOT_LINEAR is defined. * stabsread.c (read_array_type): Use new create_range_type function. * stabsread.c (read_range_type): Add new index_type variable and call new create_range_type function rather than handcrafting range types. * symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE. * symtab.c (typedef_print usages): Use c_typedef_print, renamed. * symtab.c (type_print_base usages): Use c_type_print_base. * symtab.c (type_print_varspec_prefix usages): Use c_type_print_varspec_prefix. * symtab.c (type_print_method_args usages): Use cp_type_print_method_args. * valprint.c: Completely ripped apart and the fragments used to create c-valprint.c, cp-valprint.c, m2-valprint.c, and valprint.h. Remaining stuff is language independent. * value.h (struct fn_field): Forward declare for prototypes. * value.h (type_print_1): Remove prototype. * value.h (enum val_prettyprint): Moved to defs.h. * value.h (typedef_print): Prototype renamed to c_typedef_print. * value.h (baseclass_offset): Add prototype. **** start-sanitize-chill **** * Makefile.in (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c. * Makefile.in (OBS): Add ch-typeprint.o, ch-valprint.o. * ch-typeprint.c: New file for language dependent type printing. * ch-valprint.c: New file for language dependent value printing. * ch-exp.y (parse_number): Remove prototype and stub function. * ch-exp.y (decode_integer_literal): Removed unused digits and temp variables. * ch-exp.y (convert_float): Completely ifdef out for now. * ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5), ch-lang.c (chill_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * ch-exp.y (yylex): Add unhandled storage class enumeration literals to switch statement for completeness. * ch-lang.c (chill_create_fundamental_types): Remove unused nbytes variable. Change dummy type to 2 bytes to match int. Handle FT_VOID types gratuituously added to chill DWARF by compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR type rather than a one byte TYPE_CODE_INT type. * ch-lang.c (chill_language_defn): Add chill_print_type and chill_val_print. * ch-lang.h (chill_print_type, chill_val_print): Add prototypes. **** end-sanitize-chill ****
1992-12-18 21:21:32 +01:00
exp->elts[pc + 2].longconst),
1991-03-28 17:26:26 +01:00
stream, 0, Val_no_prettyprint);
return;
case OP_DOUBLE:
(*pos) += 3;
value_print (value_from_double (exp->elts[pc + 1].type,
exp->elts[pc + 2].doubleconst),
stream, 0, Val_no_prettyprint);
return;
case OP_VAR_VALUE:
{
struct block *b;
(*pos) += 3;
b = exp->elts[pc + 1].block;
if (b != NULL
&& BLOCK_FUNCTION (b) != NULL
&& SYMBOL_SOURCE_NAME (BLOCK_FUNCTION (b)) != NULL)
{
fputs_filtered (SYMBOL_SOURCE_NAME (BLOCK_FUNCTION (b)), stream);
fputs_filtered ("::", stream);
}
fputs_filtered (SYMBOL_SOURCE_NAME (exp->elts[pc + 2].symbol), stream);
}
1991-03-28 17:26:26 +01:00
return;
case OP_LAST:
(*pos) += 2;
fprintf_filtered (stream, "$%d",
longest_to_int (exp->elts[pc + 1].longconst));
1991-03-28 17:26:26 +01:00
return;
case OP_REGISTER:
(*pos) += 2;
fprintf_filtered (stream, "$%s",
reg_names[longest_to_int (exp->elts[pc + 1].longconst)]);
1991-03-28 17:26:26 +01:00
return;
* defs.h (sevenbit_strings): Add declaration. * defs.h (printchar): Replace with gdb_printchar. * language.h (language_defn): Add new function pointers la_printchar and la_printstr, to do language dependent printing of characters and strings. * language.h (local_printchar, local_printstr): New macros to call language dependent functions pointed to by la_printchar and la_printstr respectively. * c-exp.y (emit_char, c_printchar, c_printstr): New language dependent functions for printing characters and strings. * c-exp.y (c_language_defn, cplus_language_defn): Add c_printchar and c_printstr. * command.c (do_setshow_command): Rename printchar use to gdb_printchar. * expprint.c (print_subexp): Replace C style string output with call to local_printstr. * language.c (unk_lang_printchar, unk_lang_printstr): New stubs, currently errors. * language.c (unknown_language_defn, auto_language_defn, local_language_defn): Add unk_lang_printchar and unk_lang_printstr. * m2-exp.y (emit_char, m2_printchar, m2_printstr): New language dependent functions to print characters and strings. * m2-exp.y (m2_language_defn): Add m2_printchar and m2_printstr. * utils.c (printchar): Renamed to gdb_printchar. * valprint.c (print_string): Remove prototype, function moved to c-exp.y, where it becomes c_printstr. * valprint.c (print_max): Made global for reference from the language dependent printing routines in *-exp.y. * valprint.c (repeat_count_threshold): New variable with function of old REPEAT_COUNT_THREHOLD define, but now settable by user. Change all references to old macro to references to new variable. * valprint.c (value_print, val_print): Replace calls to print_string with calls to local_printstr. * valprint.c (val_print): Replace C style character printing with call to local_printchar. * valprint.c (val_print): Add case for TYPE_CODE_CHAR. * valprint.c (_initialize_valprint): Add add_show_from_set call for setting up repeat_count_threshold as print variable. **** start-sanitize-chill **** * ch-exp.y (decode_integer_value): New function. * ch-exp.y (decode_integer_literal): Use decode_integer_value. * ch-exp.y (chill_printchar, chill_printstr): New language dependent functions for printing characters and strings. * ch-exp.y (chill_language_defn): Add chill_printchar and chill_printstr. **** end-sanitize-chill ****
1992-11-21 07:10:08 +01:00
case OP_BOOL:
(*pos) += 2;
fprintf_filtered (stream, "%s",
longest_to_int (exp->elts[pc + 1].longconst)
? "TRUE" : "FALSE");
return;
1991-03-28 17:26:26 +01:00
case OP_INTERNALVAR:
(*pos) += 2;
fprintf_filtered (stream, "$%s",
1991-03-28 17:26:26 +01:00
internalvar_name (exp->elts[pc + 1].internalvar));
return;
case OP_FUNCALL:
(*pos) += 2;
nargs = longest_to_int (exp->elts[pc + 1].longconst);
1991-03-28 17:26:26 +01:00
print_subexp (exp, pos, stream, PREC_SUFFIX);
fputs_filtered (" (", stream);
1991-03-28 17:26:26 +01:00
for (tem = 0; tem < nargs; tem++)
{
if (tem != 0)
fputs_filtered (", ", stream);
1991-03-28 17:26:26 +01:00
print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
}
fputs_filtered (")", stream);
1991-03-28 17:26:26 +01:00
return;
* breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET around calls to create_longjmp_breakpoint. Why install the breakpoints if we can't find the longjmp target? * infrun.c (wait_for_inferior): Cleanup comments near call test. * remote-mips.c: Fixed a bunch of prototypes to avoid char/int complaint from picky compilers. Add comment to mips_expect. Replace all instances of sr_get_debug with remote_debug. * (mips_readchar): Don't jam init string to monitor. mips_initialize() handles that. * (mips_receive_header): Print better message when we get too much garbage. * (mips_request): Allow caller to pass in buff to allow them to analyze the returned message. * (mips_initialize): Re-do initialization to try sending a BREAK, a ^C, and then a download escape sequence. Cleanup protocol startup. Eliminate sleeps. Clear breakpoints (if using monitor breakpoints). Re-init frame. * (mips_detach): Close down target. start-sanitize-gm * (mips_resume): Pass signal down to target. * (mips_create_inferior): Start target with TARGET_SIGNAL_PWR. end-sanitize-gm * (mips_wait): Handle return status with registers, or breakpoint stuff. * (mips_kill): Add ^C handling. * (mips_insert_breakpoint mips_remove_breakpoint): Call new breakpoint stuff if enabled. * (calculate_mask remote_mips_set_watchpoint remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint): Hardware watchpoint/breakpoint stuff. * (common_breakpoint): Common code for new monitor breakpoint commands. * (mips_load): Don't use `prompt'. It's a global variable. * top.c (dont_repeat_command): New command for use in user-defined commands to suppress auto-repeat (by hittin return key). start-sanitize-gm * utils.c (request_quit): Call target_kill here. Good idea. Needs a better implementation. end-sanitize-gm * valops.c: Add start of auto function-call abandonment capability. start-sanitize-gm * c-exp.y: Add code (currently disabled) to handle GM dynamic structures (it conflicts with @!). * eval.c (evaluate_subexp_standard): ditto. * expprint.c (print_subexp dump_expression): ditto. * expression.h (enum exp_opcode): ditto. * parse.c (length_of_subexp): ditto. * configure, configure.in: Add mip*-*-magic* target. * magic.c magic.h: Special routines to handle GM stuff (like stepping through dispatcher). end-sanitize-gm
1995-10-27 18:48:36 +01:00
case OP_NAME:
case OP_EXPRSTRING:
nargs = longest_to_int (exp -> elts[pc + 1].longconst);
(*pos) += 3 + BYTES_TO_EXP_ELEM (nargs + 1);
fputs_filtered (&exp->elts[pc + 2].string, stream);
return;
1991-03-28 17:26:26 +01:00
case OP_STRING:
* Makefile.in (VERSION): Bump to 4.7.4. * Makefile.in (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c, m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c. * Makefile.in (HFILES): Add valprint.h. * Makefile.in (OBS): Add typeprint.o, c-typeprint.o, m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o. * typeprint.c, typeprint.h: New files for language independent type printing functions. * c-typeprint.c, m2-typeprint.c: New files for language dependent type printing functions and definitions. * valprint.h: New include file for language independent value printing definitions. * c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language dependent value printing functions. * c-exp.y (production ptype): Add range_type variable and use new create_range_type function. * c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab), infcmd.c (path_var_name), language.c (unk_op_print_tab), m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * c-exp.y (c_create_fundamental_type): Remove unused nbytes. * c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type, and c_val_print. * c-lang.h (c_print_type, c_val_print): Add prototypes. * coffread.c (decode_type): Add range_type variable and call to new create_range_type function. * complaints.c (complain): Remove unused val variable. * complaints.c (_initialize_complaints): Make it void. * convex-tdep.c (value_of_trapped_internalvar): Add range_type variable and call new create_range_type function. * defs.h (enum val_prettyprint): Move enum from value.h to here so we can avoid having to include value.h just for prototypes that need the enum (thanks ANSI). * dwarfread.c (struct_type): Local anonymous_size variable is only used if !BITS_BIG_ENDIAN. * dwarfread.c (decode_subscript_data_item): Add rangetype variable and call new create_range_type function. * elfread.c (elf_symfile_read): Remove unused dbx and text_sect variables. * eval.c (evaluate_subexp): Remove unused local variable name and the statement with no side effects that initializes it. * expprint.c (print_subexp): Change local_printstr to LA_PRINT_STRING. * gdbtypes.c (create_range_type): New function that creates a range type using code fragments from object file readers as an example of what has to be initialized. * gdbtypes.c (create_array_type): Removed index_type, low_bound, and high_bound parameters, replaced with a single range_type parameter. Change function body to use passed in range_type rather than handcrafting one. * gdbtypes.h (create_range_type): Add prototype. * gdbtypes.h (create_array_type): Change prototype parameters. * infrun.c (normal_stop): Remove unused local variables tem and c. * infrun.c (hook_stop_stub): Return 0 rather than random value. * language.c (unk_lang_print_type, unk_lang_val_print): Add stub functions that call error if called. * language.c (unknown_language_defn, auto_language_defn, local_language_defn): Add initializers unk_lang_print_type and unk_lang_val_print. * language.h (struct language_defn): Reformat for larger comments, add la_print_type and la_val_print members. Add LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING. * m2-lang.c (m2_create_fundamental_type): Remove unused local variable nbytes. * m2-lang.c (m2_language_defn): Add initializers m2_print_type and m2_val_print. * m2-lang.h (m2_print_type, m2_val_print): Add prototypes. * main.c (execute_command): Remove unused local variable cmdlines. * main.c (echo_command), stabsread.c (read_type), printcmd.c (clear_displays), symmisc.c (block_depth), values.c (clear_value_history): Make testing of truth value of assignment result explicit. * mipsread.c (upgrade_type): Update FIXME to include future use of create_range_type. * printcmd.c (ptype_command, ptype_eval, whatis_command, whatis_exp, maintenance_print_type): Move prototypes and functions to new typeprint.c. * printcmd.c (_initialize_printcmd): Move add_com calls for ptype_command and whatis_command to new typeprint.c. * ser-bsd.c (serial_open): Remove unused variable sgttyb. * source.c (find_source_lines): Local variable c only used when LSEEK_NOT_LINEAR is defined. * stabsread.c (read_array_type): Use new create_range_type function. * stabsread.c (read_range_type): Add new index_type variable and call new create_range_type function rather than handcrafting range types. * symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE. * symtab.c (typedef_print usages): Use c_typedef_print, renamed. * symtab.c (type_print_base usages): Use c_type_print_base. * symtab.c (type_print_varspec_prefix usages): Use c_type_print_varspec_prefix. * symtab.c (type_print_method_args usages): Use cp_type_print_method_args. * valprint.c: Completely ripped apart and the fragments used to create c-valprint.c, cp-valprint.c, m2-valprint.c, and valprint.h. Remaining stuff is language independent. * value.h (struct fn_field): Forward declare for prototypes. * value.h (type_print_1): Remove prototype. * value.h (enum val_prettyprint): Moved to defs.h. * value.h (typedef_print): Prototype renamed to c_typedef_print. * value.h (baseclass_offset): Add prototype. **** start-sanitize-chill **** * Makefile.in (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c. * Makefile.in (OBS): Add ch-typeprint.o, ch-valprint.o. * ch-typeprint.c: New file for language dependent type printing. * ch-valprint.c: New file for language dependent value printing. * ch-exp.y (parse_number): Remove prototype and stub function. * ch-exp.y (decode_integer_literal): Removed unused digits and temp variables. * ch-exp.y (convert_float): Completely ifdef out for now. * ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5), ch-lang.c (chill_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * ch-exp.y (yylex): Add unhandled storage class enumeration literals to switch statement for completeness. * ch-lang.c (chill_create_fundamental_types): Remove unused nbytes variable. Change dummy type to 2 bytes to match int. Handle FT_VOID types gratuituously added to chill DWARF by compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR type rather than a one byte TYPE_CODE_INT type. * ch-lang.c (chill_language_defn): Add chill_print_type and chill_val_print. * ch-lang.h (chill_print_type, chill_val_print): Add prototypes. **** end-sanitize-chill ****
1992-12-18 21:21:32 +01:00
nargs = longest_to_int (exp -> elts[pc + 1].longconst);
* c-exp.y (exp:STRING): Convert C strings into array-of-char constants with an explicit null byte terminator. OP_STRING is now used for real string types. * c-lang.c (builtin_type_*): Move declarations to lang.c since they are used by all languages. * c-lang.c (_initialize_c_language): Move initializations of builtin_type_* to lang.c. * c-typeprint.c (c_type_print_varspec_prefix, c_type_print_varspec_suffix): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * c-valprint.c (c_val_print): Change the way character arrays are printed as strings to be consistent with the way strings are printed when pointer-to-char types are dereferenced. Remove test of print_max before calling val_print_string, which now does it's own test. * eval.c (evaluate_subexp): Add case for OP_ARRAY. * expprint.c (print_subexp, dump_expression): Add case for OP_ARRAY. * expression.h (enum exp_opcode): Add OP_ARRAY and document. * gdbtypes.c (builtin_type_*): Add declarations moved from c-lang.c. * gdbtypes.c (create_string_type): New function to create real string types. * gdbtypes.c (recursive_dump_type): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * gdbtypes.c (_initialize_gdbtypes): Add initializations of builtin_type_* types moved from c-lang.c. * gdbtypes.h (enum type_code): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * gdbtypes.h (builtin_type_string): Add extern declaration. * gdbtypes.h (create_string_type): Add prototype. * m2-lang.c (m2_create_fundamental_type): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * m88k-tdep.c (pushed_size): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * mipsread.c (_initialize_mipsread): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * parse.c (length_of_subexp, prefixify_subexp): Add case for OP_ARRAY. * printcmd.c (print_formatted): Recognize TYPE_CODE_STRING. * typeprint.c (print_type_scalar): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * valops.c (allocate_space_in_inferior): New function and prototype, using code ripped out of value_string. * valops.c (value_string): Rewritten to use new function allocate_space_in_inferior, but temporarily disabled until some other support is in place. * valops.c (value_array): New function to create array constants. * valprint.c (val_print_string): Add comment to document use, complete rewrite to fix several small buglets. * value.h (value_array): Add prototype. * value.h (val_print_string): Change prototype to match rewrite. **** start-sanitize-chill **** * ch-valprint.c (chill_val_print): Add case for TYPE_CODE_STRING. * ch-exp.y (match_character_literal): Disable recognition of control sequence form of character literals and document why. **** end-sanitize-chill ****
1993-01-16 06:15:58 +01:00
(*pos) += 3 + BYTES_TO_EXP_ELEM (nargs + 1);
* Makefile.in (VERSION): Bump to 4.7.4. * Makefile.in (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c, m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c. * Makefile.in (HFILES): Add valprint.h. * Makefile.in (OBS): Add typeprint.o, c-typeprint.o, m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o. * typeprint.c, typeprint.h: New files for language independent type printing functions. * c-typeprint.c, m2-typeprint.c: New files for language dependent type printing functions and definitions. * valprint.h: New include file for language independent value printing definitions. * c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language dependent value printing functions. * c-exp.y (production ptype): Add range_type variable and use new create_range_type function. * c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab), infcmd.c (path_var_name), language.c (unk_op_print_tab), m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * c-exp.y (c_create_fundamental_type): Remove unused nbytes. * c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type, and c_val_print. * c-lang.h (c_print_type, c_val_print): Add prototypes. * coffread.c (decode_type): Add range_type variable and call to new create_range_type function. * complaints.c (complain): Remove unused val variable. * complaints.c (_initialize_complaints): Make it void. * convex-tdep.c (value_of_trapped_internalvar): Add range_type variable and call new create_range_type function. * defs.h (enum val_prettyprint): Move enum from value.h to here so we can avoid having to include value.h just for prototypes that need the enum (thanks ANSI). * dwarfread.c (struct_type): Local anonymous_size variable is only used if !BITS_BIG_ENDIAN. * dwarfread.c (decode_subscript_data_item): Add rangetype variable and call new create_range_type function. * elfread.c (elf_symfile_read): Remove unused dbx and text_sect variables. * eval.c (evaluate_subexp): Remove unused local variable name and the statement with no side effects that initializes it. * expprint.c (print_subexp): Change local_printstr to LA_PRINT_STRING. * gdbtypes.c (create_range_type): New function that creates a range type using code fragments from object file readers as an example of what has to be initialized. * gdbtypes.c (create_array_type): Removed index_type, low_bound, and high_bound parameters, replaced with a single range_type parameter. Change function body to use passed in range_type rather than handcrafting one. * gdbtypes.h (create_range_type): Add prototype. * gdbtypes.h (create_array_type): Change prototype parameters. * infrun.c (normal_stop): Remove unused local variables tem and c. * infrun.c (hook_stop_stub): Return 0 rather than random value. * language.c (unk_lang_print_type, unk_lang_val_print): Add stub functions that call error if called. * language.c (unknown_language_defn, auto_language_defn, local_language_defn): Add initializers unk_lang_print_type and unk_lang_val_print. * language.h (struct language_defn): Reformat for larger comments, add la_print_type and la_val_print members. Add LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING. * m2-lang.c (m2_create_fundamental_type): Remove unused local variable nbytes. * m2-lang.c (m2_language_defn): Add initializers m2_print_type and m2_val_print. * m2-lang.h (m2_print_type, m2_val_print): Add prototypes. * main.c (execute_command): Remove unused local variable cmdlines. * main.c (echo_command), stabsread.c (read_type), printcmd.c (clear_displays), symmisc.c (block_depth), values.c (clear_value_history): Make testing of truth value of assignment result explicit. * mipsread.c (upgrade_type): Update FIXME to include future use of create_range_type. * printcmd.c (ptype_command, ptype_eval, whatis_command, whatis_exp, maintenance_print_type): Move prototypes and functions to new typeprint.c. * printcmd.c (_initialize_printcmd): Move add_com calls for ptype_command and whatis_command to new typeprint.c. * ser-bsd.c (serial_open): Remove unused variable sgttyb. * source.c (find_source_lines): Local variable c only used when LSEEK_NOT_LINEAR is defined. * stabsread.c (read_array_type): Use new create_range_type function. * stabsread.c (read_range_type): Add new index_type variable and call new create_range_type function rather than handcrafting range types. * symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE. * symtab.c (typedef_print usages): Use c_typedef_print, renamed. * symtab.c (type_print_base usages): Use c_type_print_base. * symtab.c (type_print_varspec_prefix usages): Use c_type_print_varspec_prefix. * symtab.c (type_print_method_args usages): Use cp_type_print_method_args. * valprint.c: Completely ripped apart and the fragments used to create c-valprint.c, cp-valprint.c, m2-valprint.c, and valprint.h. Remaining stuff is language independent. * value.h (struct fn_field): Forward declare for prototypes. * value.h (type_print_1): Remove prototype. * value.h (enum val_prettyprint): Moved to defs.h. * value.h (typedef_print): Prototype renamed to c_typedef_print. * value.h (baseclass_offset): Add prototype. **** start-sanitize-chill **** * Makefile.in (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c. * Makefile.in (OBS): Add ch-typeprint.o, ch-valprint.o. * ch-typeprint.c: New file for language dependent type printing. * ch-valprint.c: New file for language dependent value printing. * ch-exp.y (parse_number): Remove prototype and stub function. * ch-exp.y (decode_integer_literal): Removed unused digits and temp variables. * ch-exp.y (convert_float): Completely ifdef out for now. * ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5), ch-lang.c (chill_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * ch-exp.y (yylex): Add unhandled storage class enumeration literals to switch statement for completeness. * ch-lang.c (chill_create_fundamental_types): Remove unused nbytes variable. Change dummy type to 2 bytes to match int. Handle FT_VOID types gratuituously added to chill DWARF by compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR type rather than a one byte TYPE_CODE_INT type. * ch-lang.c (chill_language_defn): Add chill_print_type and chill_val_print. * ch-lang.h (chill_print_type, chill_val_print): Add prototypes. **** end-sanitize-chill ****
1992-12-18 21:21:32 +01:00
/* LA_PRINT_STRING will print using the current repeat count threshold.
* defs.h (sevenbit_strings): Add declaration. * defs.h (printchar): Replace with gdb_printchar. * language.h (language_defn): Add new function pointers la_printchar and la_printstr, to do language dependent printing of characters and strings. * language.h (local_printchar, local_printstr): New macros to call language dependent functions pointed to by la_printchar and la_printstr respectively. * c-exp.y (emit_char, c_printchar, c_printstr): New language dependent functions for printing characters and strings. * c-exp.y (c_language_defn, cplus_language_defn): Add c_printchar and c_printstr. * command.c (do_setshow_command): Rename printchar use to gdb_printchar. * expprint.c (print_subexp): Replace C style string output with call to local_printstr. * language.c (unk_lang_printchar, unk_lang_printstr): New stubs, currently errors. * language.c (unknown_language_defn, auto_language_defn, local_language_defn): Add unk_lang_printchar and unk_lang_printstr. * m2-exp.y (emit_char, m2_printchar, m2_printstr): New language dependent functions to print characters and strings. * m2-exp.y (m2_language_defn): Add m2_printchar and m2_printstr. * utils.c (printchar): Renamed to gdb_printchar. * valprint.c (print_string): Remove prototype, function moved to c-exp.y, where it becomes c_printstr. * valprint.c (print_max): Made global for reference from the language dependent printing routines in *-exp.y. * valprint.c (repeat_count_threshold): New variable with function of old REPEAT_COUNT_THREHOLD define, but now settable by user. Change all references to old macro to references to new variable. * valprint.c (value_print, val_print): Replace calls to print_string with calls to local_printstr. * valprint.c (val_print): Replace C style character printing with call to local_printchar. * valprint.c (val_print): Add case for TYPE_CODE_CHAR. * valprint.c (_initialize_valprint): Add add_show_from_set call for setting up repeat_count_threshold as print variable. **** start-sanitize-chill **** * ch-exp.y (decode_integer_value): New function. * ch-exp.y (decode_integer_literal): Use decode_integer_value. * ch-exp.y (chill_printchar, chill_printstr): New language dependent functions for printing characters and strings. * ch-exp.y (chill_language_defn): Add chill_printchar and chill_printstr. **** end-sanitize-chill ****
1992-11-21 07:10:08 +01:00
If necessary, we can temporarily set it to zero, or pass it as an
* Makefile.in (VERSION): Bump to 4.7.4. * Makefile.in (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c, m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c. * Makefile.in (HFILES): Add valprint.h. * Makefile.in (OBS): Add typeprint.o, c-typeprint.o, m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o. * typeprint.c, typeprint.h: New files for language independent type printing functions. * c-typeprint.c, m2-typeprint.c: New files for language dependent type printing functions and definitions. * valprint.h: New include file for language independent value printing definitions. * c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language dependent value printing functions. * c-exp.y (production ptype): Add range_type variable and use new create_range_type function. * c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab), infcmd.c (path_var_name), language.c (unk_op_print_tab), m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * c-exp.y (c_create_fundamental_type): Remove unused nbytes. * c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type, and c_val_print. * c-lang.h (c_print_type, c_val_print): Add prototypes. * coffread.c (decode_type): Add range_type variable and call to new create_range_type function. * complaints.c (complain): Remove unused val variable. * complaints.c (_initialize_complaints): Make it void. * convex-tdep.c (value_of_trapped_internalvar): Add range_type variable and call new create_range_type function. * defs.h (enum val_prettyprint): Move enum from value.h to here so we can avoid having to include value.h just for prototypes that need the enum (thanks ANSI). * dwarfread.c (struct_type): Local anonymous_size variable is only used if !BITS_BIG_ENDIAN. * dwarfread.c (decode_subscript_data_item): Add rangetype variable and call new create_range_type function. * elfread.c (elf_symfile_read): Remove unused dbx and text_sect variables. * eval.c (evaluate_subexp): Remove unused local variable name and the statement with no side effects that initializes it. * expprint.c (print_subexp): Change local_printstr to LA_PRINT_STRING. * gdbtypes.c (create_range_type): New function that creates a range type using code fragments from object file readers as an example of what has to be initialized. * gdbtypes.c (create_array_type): Removed index_type, low_bound, and high_bound parameters, replaced with a single range_type parameter. Change function body to use passed in range_type rather than handcrafting one. * gdbtypes.h (create_range_type): Add prototype. * gdbtypes.h (create_array_type): Change prototype parameters. * infrun.c (normal_stop): Remove unused local variables tem and c. * infrun.c (hook_stop_stub): Return 0 rather than random value. * language.c (unk_lang_print_type, unk_lang_val_print): Add stub functions that call error if called. * language.c (unknown_language_defn, auto_language_defn, local_language_defn): Add initializers unk_lang_print_type and unk_lang_val_print. * language.h (struct language_defn): Reformat for larger comments, add la_print_type and la_val_print members. Add LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING. * m2-lang.c (m2_create_fundamental_type): Remove unused local variable nbytes. * m2-lang.c (m2_language_defn): Add initializers m2_print_type and m2_val_print. * m2-lang.h (m2_print_type, m2_val_print): Add prototypes. * main.c (execute_command): Remove unused local variable cmdlines. * main.c (echo_command), stabsread.c (read_type), printcmd.c (clear_displays), symmisc.c (block_depth), values.c (clear_value_history): Make testing of truth value of assignment result explicit. * mipsread.c (upgrade_type): Update FIXME to include future use of create_range_type. * printcmd.c (ptype_command, ptype_eval, whatis_command, whatis_exp, maintenance_print_type): Move prototypes and functions to new typeprint.c. * printcmd.c (_initialize_printcmd): Move add_com calls for ptype_command and whatis_command to new typeprint.c. * ser-bsd.c (serial_open): Remove unused variable sgttyb. * source.c (find_source_lines): Local variable c only used when LSEEK_NOT_LINEAR is defined. * stabsread.c (read_array_type): Use new create_range_type function. * stabsread.c (read_range_type): Add new index_type variable and call new create_range_type function rather than handcrafting range types. * symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE. * symtab.c (typedef_print usages): Use c_typedef_print, renamed. * symtab.c (type_print_base usages): Use c_type_print_base. * symtab.c (type_print_varspec_prefix usages): Use c_type_print_varspec_prefix. * symtab.c (type_print_method_args usages): Use cp_type_print_method_args. * valprint.c: Completely ripped apart and the fragments used to create c-valprint.c, cp-valprint.c, m2-valprint.c, and valprint.h. Remaining stuff is language independent. * value.h (struct fn_field): Forward declare for prototypes. * value.h (type_print_1): Remove prototype. * value.h (enum val_prettyprint): Moved to defs.h. * value.h (typedef_print): Prototype renamed to c_typedef_print. * value.h (baseclass_offset): Add prototype. **** start-sanitize-chill **** * Makefile.in (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c. * Makefile.in (OBS): Add ch-typeprint.o, ch-valprint.o. * ch-typeprint.c: New file for language dependent type printing. * ch-valprint.c: New file for language dependent value printing. * ch-exp.y (parse_number): Remove prototype and stub function. * ch-exp.y (decode_integer_literal): Removed unused digits and temp variables. * ch-exp.y (convert_float): Completely ifdef out for now. * ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5), ch-lang.c (chill_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * ch-exp.y (yylex): Add unhandled storage class enumeration literals to switch statement for completeness. * ch-lang.c (chill_create_fundamental_types): Remove unused nbytes variable. Change dummy type to 2 bytes to match int. Handle FT_VOID types gratuituously added to chill DWARF by compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR type rather than a one byte TYPE_CODE_INT type. * ch-lang.c (chill_language_defn): Add chill_print_type and chill_val_print. * ch-lang.h (chill_print_type, chill_val_print): Add prototypes. **** end-sanitize-chill ****
1992-12-18 21:21:32 +01:00
additional parameter to LA_PRINT_STRING. -fnf */
LA_PRINT_STRING (stream, &exp->elts[pc + 2].string, nargs, 0);
1991-03-28 17:26:26 +01:00
return;
* c-exp.y (exp:STRING): Convert C strings into array-of-char constants with an explicit null byte terminator. OP_STRING is now used for real string types. * c-lang.c (builtin_type_*): Move declarations to lang.c since they are used by all languages. * c-lang.c (_initialize_c_language): Move initializations of builtin_type_* to lang.c. * c-typeprint.c (c_type_print_varspec_prefix, c_type_print_varspec_suffix): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * c-valprint.c (c_val_print): Change the way character arrays are printed as strings to be consistent with the way strings are printed when pointer-to-char types are dereferenced. Remove test of print_max before calling val_print_string, which now does it's own test. * eval.c (evaluate_subexp): Add case for OP_ARRAY. * expprint.c (print_subexp, dump_expression): Add case for OP_ARRAY. * expression.h (enum exp_opcode): Add OP_ARRAY and document. * gdbtypes.c (builtin_type_*): Add declarations moved from c-lang.c. * gdbtypes.c (create_string_type): New function to create real string types. * gdbtypes.c (recursive_dump_type): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * gdbtypes.c (_initialize_gdbtypes): Add initializations of builtin_type_* types moved from c-lang.c. * gdbtypes.h (enum type_code): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * gdbtypes.h (builtin_type_string): Add extern declaration. * gdbtypes.h (create_string_type): Add prototype. * m2-lang.c (m2_create_fundamental_type): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * m88k-tdep.c (pushed_size): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * mipsread.c (_initialize_mipsread): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * parse.c (length_of_subexp, prefixify_subexp): Add case for OP_ARRAY. * printcmd.c (print_formatted): Recognize TYPE_CODE_STRING. * typeprint.c (print_type_scalar): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * valops.c (allocate_space_in_inferior): New function and prototype, using code ripped out of value_string. * valops.c (value_string): Rewritten to use new function allocate_space_in_inferior, but temporarily disabled until some other support is in place. * valops.c (value_array): New function to create array constants. * valprint.c (val_print_string): Add comment to document use, complete rewrite to fix several small buglets. * value.h (value_array): Add prototype. * value.h (val_print_string): Change prototype to match rewrite. **** start-sanitize-chill **** * ch-valprint.c (chill_val_print): Add case for TYPE_CODE_STRING. * ch-exp.y (match_character_literal): Disable recognition of control sequence form of character literals and document why. **** end-sanitize-chill ****
1993-01-16 06:15:58 +01:00
case OP_BITSTRING:
* breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET around calls to create_longjmp_breakpoint. Why install the breakpoints if we can't find the longjmp target? * infrun.c (wait_for_inferior): Cleanup comments near call test. * remote-mips.c: Fixed a bunch of prototypes to avoid char/int complaint from picky compilers. Add comment to mips_expect. Replace all instances of sr_get_debug with remote_debug. * (mips_readchar): Don't jam init string to monitor. mips_initialize() handles that. * (mips_receive_header): Print better message when we get too much garbage. * (mips_request): Allow caller to pass in buff to allow them to analyze the returned message. * (mips_initialize): Re-do initialization to try sending a BREAK, a ^C, and then a download escape sequence. Cleanup protocol startup. Eliminate sleeps. Clear breakpoints (if using monitor breakpoints). Re-init frame. * (mips_detach): Close down target. start-sanitize-gm * (mips_resume): Pass signal down to target. * (mips_create_inferior): Start target with TARGET_SIGNAL_PWR. end-sanitize-gm * (mips_wait): Handle return status with registers, or breakpoint stuff. * (mips_kill): Add ^C handling. * (mips_insert_breakpoint mips_remove_breakpoint): Call new breakpoint stuff if enabled. * (calculate_mask remote_mips_set_watchpoint remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint): Hardware watchpoint/breakpoint stuff. * (common_breakpoint): Common code for new monitor breakpoint commands. * (mips_load): Don't use `prompt'. It's a global variable. * top.c (dont_repeat_command): New command for use in user-defined commands to suppress auto-repeat (by hittin return key). start-sanitize-gm * utils.c (request_quit): Call target_kill here. Good idea. Needs a better implementation. end-sanitize-gm * valops.c: Add start of auto function-call abandonment capability. start-sanitize-gm * c-exp.y: Add code (currently disabled) to handle GM dynamic structures (it conflicts with @!). * eval.c (evaluate_subexp_standard): ditto. * expprint.c (print_subexp dump_expression): ditto. * expression.h (enum exp_opcode): ditto. * parse.c (length_of_subexp): ditto. * configure, configure.in: Add mip*-*-magic* target. * magic.c magic.h: Special routines to handle GM stuff (like stepping through dispatcher). end-sanitize-gm
1995-10-27 18:48:36 +01:00
nargs = longest_to_int (exp -> elts[pc + 1].longconst);
(*pos)
+= 3 + BYTES_TO_EXP_ELEM ((nargs + HOST_CHAR_BIT - 1) / HOST_CHAR_BIT);
fprintf (stream, "B'<unimplemented>'");
return;
* c-exp.y (exp:STRING): Convert C strings into array-of-char constants with an explicit null byte terminator. OP_STRING is now used for real string types. * c-lang.c (builtin_type_*): Move declarations to lang.c since they are used by all languages. * c-lang.c (_initialize_c_language): Move initializations of builtin_type_* to lang.c. * c-typeprint.c (c_type_print_varspec_prefix, c_type_print_varspec_suffix): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * c-valprint.c (c_val_print): Change the way character arrays are printed as strings to be consistent with the way strings are printed when pointer-to-char types are dereferenced. Remove test of print_max before calling val_print_string, which now does it's own test. * eval.c (evaluate_subexp): Add case for OP_ARRAY. * expprint.c (print_subexp, dump_expression): Add case for OP_ARRAY. * expression.h (enum exp_opcode): Add OP_ARRAY and document. * gdbtypes.c (builtin_type_*): Add declarations moved from c-lang.c. * gdbtypes.c (create_string_type): New function to create real string types. * gdbtypes.c (recursive_dump_type): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * gdbtypes.c (_initialize_gdbtypes): Add initializations of builtin_type_* types moved from c-lang.c. * gdbtypes.h (enum type_code): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * gdbtypes.h (builtin_type_string): Add extern declaration. * gdbtypes.h (create_string_type): Add prototype. * m2-lang.c (m2_create_fundamental_type): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * m88k-tdep.c (pushed_size): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * mipsread.c (_initialize_mipsread): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * parse.c (length_of_subexp, prefixify_subexp): Add case for OP_ARRAY. * printcmd.c (print_formatted): Recognize TYPE_CODE_STRING. * typeprint.c (print_type_scalar): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * valops.c (allocate_space_in_inferior): New function and prototype, using code ripped out of value_string. * valops.c (value_string): Rewritten to use new function allocate_space_in_inferior, but temporarily disabled until some other support is in place. * valops.c (value_array): New function to create array constants. * valprint.c (val_print_string): Add comment to document use, complete rewrite to fix several small buglets. * value.h (value_array): Add prototype. * value.h (val_print_string): Change prototype to match rewrite. **** start-sanitize-chill **** * ch-valprint.c (chill_val_print): Add case for TYPE_CODE_STRING. * ch-exp.y (match_character_literal): Disable recognition of control sequence form of character literals and document why. **** end-sanitize-chill ****
1993-01-16 06:15:58 +01:00
case OP_ARRAY:
(*pos) += 3;
nargs = longest_to_int (exp->elts[pc + 2].longconst);
nargs -= longest_to_int (exp->elts[pc + 1].longconst);
nargs++;
tem = 0;
if (exp->elts[pc + 4].opcode == OP_LONG
&& exp->elts[pc + 5].type == builtin_type_char
&& exp->language_defn->la_language == language_c)
{
/* Attempt to print C character arrays using string syntax.
Walk through the args, picking up one character from each
of the OP_LONG expression elements. If any array element
does not match our expection of what we should find for
a simple string, revert back to array printing. Note that
the last expression element is an explicit null terminator
byte, which doesn't get printed. */
tempstr = alloca (nargs);
pc += 4;
while (tem < nargs)
{
if (exp->elts[pc].opcode != OP_LONG
|| exp->elts[pc + 1].type != builtin_type_char)
{
/* Not a simple array of char, use regular array printing. */
tem = 0;
break;
}
else
{
tempstr[tem++] =
longest_to_int (exp->elts[pc + 2].longconst);
pc += 4;
}
}
}
if (tem > 0)
{
LA_PRINT_STRING (stream, tempstr, nargs - 1, 0);
(*pos) = pc;
}
else
{
int is_chill = exp->language_defn->la_language == language_chill;
fputs_filtered (is_chill ? " [" : " {", stream);
for (tem = 0; tem < nargs; tem++)
{
if (tem != 0)
{
fputs_filtered (", ", stream);
}
print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
}
fputs_filtered (is_chill ? "]" : "}", stream);
}
return;
* c-exp.y (exp:STRING): Convert C strings into array-of-char constants with an explicit null byte terminator. OP_STRING is now used for real string types. * c-lang.c (builtin_type_*): Move declarations to lang.c since they are used by all languages. * c-lang.c (_initialize_c_language): Move initializations of builtin_type_* to lang.c. * c-typeprint.c (c_type_print_varspec_prefix, c_type_print_varspec_suffix): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * c-valprint.c (c_val_print): Change the way character arrays are printed as strings to be consistent with the way strings are printed when pointer-to-char types are dereferenced. Remove test of print_max before calling val_print_string, which now does it's own test. * eval.c (evaluate_subexp): Add case for OP_ARRAY. * expprint.c (print_subexp, dump_expression): Add case for OP_ARRAY. * expression.h (enum exp_opcode): Add OP_ARRAY and document. * gdbtypes.c (builtin_type_*): Add declarations moved from c-lang.c. * gdbtypes.c (create_string_type): New function to create real string types. * gdbtypes.c (recursive_dump_type): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * gdbtypes.c (_initialize_gdbtypes): Add initializations of builtin_type_* types moved from c-lang.c. * gdbtypes.h (enum type_code): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * gdbtypes.h (builtin_type_string): Add extern declaration. * gdbtypes.h (create_string_type): Add prototype. * m2-lang.c (m2_create_fundamental_type): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * m88k-tdep.c (pushed_size): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * mipsread.c (_initialize_mipsread): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * parse.c (length_of_subexp, prefixify_subexp): Add case for OP_ARRAY. * printcmd.c (print_formatted): Recognize TYPE_CODE_STRING. * typeprint.c (print_type_scalar): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * valops.c (allocate_space_in_inferior): New function and prototype, using code ripped out of value_string. * valops.c (value_string): Rewritten to use new function allocate_space_in_inferior, but temporarily disabled until some other support is in place. * valops.c (value_array): New function to create array constants. * valprint.c (val_print_string): Add comment to document use, complete rewrite to fix several small buglets. * value.h (value_array): Add prototype. * value.h (val_print_string): Change prototype to match rewrite. **** start-sanitize-chill **** * ch-valprint.c (chill_val_print): Add case for TYPE_CODE_STRING. * ch-exp.y (match_character_literal): Disable recognition of control sequence form of character literals and document why. **** end-sanitize-chill ****
1993-01-16 06:15:58 +01:00
case OP_LABELED:
tem = longest_to_int (exp->elts[pc + 1].longconst);
(*pos) += 3 + BYTES_TO_EXP_ELEM (tem + 1);
if (exp->language_defn->la_language == language_chill)
{
fputs_filtered (".", stream);
fputs_filtered (&exp->elts[pc + 2].string, stream);
fputs_filtered (exp->elts[*pos].opcode == OP_LABELED ? ", "
: ": ",
stream);
}
else
{
/* Gcc support both these syntaxes. Unsure which is preferred. */
#if 1
fputs_filtered (&exp->elts[pc + 2].string, stream);
fputs_filtered (": ", stream);
#else
fputs_filtered (".", stream);
fputs_filtered (&exp->elts[pc + 2].string, stream);
fputs_filtered ("=", stream);
#endif
}
print_subexp (exp, pos, stream, PREC_SUFFIX);
return;
1991-03-28 17:26:26 +01:00
case TERNOP_COND:
if ((int) prec > (int) PREC_COMMA)
fputs_filtered ("(", stream);
1991-03-28 17:26:26 +01:00
/* Print the subexpressions, forcing parentheses
around any binary operations within them.
This is more parentheses than are strictly necessary,
but it looks clearer. */
print_subexp (exp, pos, stream, PREC_HYPER);
fputs_filtered (" ? ", stream);
1991-03-28 17:26:26 +01:00
print_subexp (exp, pos, stream, PREC_HYPER);
fputs_filtered (" : ", stream);
1991-03-28 17:26:26 +01:00
print_subexp (exp, pos, stream, PREC_HYPER);
if ((int) prec > (int) PREC_COMMA)
fputs_filtered (")", stream);
1991-03-28 17:26:26 +01:00
return;
* breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET around calls to create_longjmp_breakpoint. Why install the breakpoints if we can't find the longjmp target? * infrun.c (wait_for_inferior): Cleanup comments near call test. * remote-mips.c: Fixed a bunch of prototypes to avoid char/int complaint from picky compilers. Add comment to mips_expect. Replace all instances of sr_get_debug with remote_debug. * (mips_readchar): Don't jam init string to monitor. mips_initialize() handles that. * (mips_receive_header): Print better message when we get too much garbage. * (mips_request): Allow caller to pass in buff to allow them to analyze the returned message. * (mips_initialize): Re-do initialization to try sending a BREAK, a ^C, and then a download escape sequence. Cleanup protocol startup. Eliminate sleeps. Clear breakpoints (if using monitor breakpoints). Re-init frame. * (mips_detach): Close down target. start-sanitize-gm * (mips_resume): Pass signal down to target. * (mips_create_inferior): Start target with TARGET_SIGNAL_PWR. end-sanitize-gm * (mips_wait): Handle return status with registers, or breakpoint stuff. * (mips_kill): Add ^C handling. * (mips_insert_breakpoint mips_remove_breakpoint): Call new breakpoint stuff if enabled. * (calculate_mask remote_mips_set_watchpoint remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint): Hardware watchpoint/breakpoint stuff. * (common_breakpoint): Common code for new monitor breakpoint commands. * (mips_load): Don't use `prompt'. It's a global variable. * top.c (dont_repeat_command): New command for use in user-defined commands to suppress auto-repeat (by hittin return key). start-sanitize-gm * utils.c (request_quit): Call target_kill here. Good idea. Needs a better implementation. end-sanitize-gm * valops.c: Add start of auto function-call abandonment capability. start-sanitize-gm * c-exp.y: Add code (currently disabled) to handle GM dynamic structures (it conflicts with @!). * eval.c (evaluate_subexp_standard): ditto. * expprint.c (print_subexp dump_expression): ditto. * expression.h (enum exp_opcode): ditto. * parse.c (length_of_subexp): ditto. * configure, configure.in: Add mip*-*-magic* target. * magic.c magic.h: Special routines to handle GM stuff (like stepping through dispatcher). end-sanitize-gm
1995-10-27 18:48:36 +01:00
case TERNOP_SLICE:
case TERNOP_SLICE_COUNT:
print_subexp (exp, pos, stream, PREC_SUFFIX);
fputs_filtered ("(", stream);
print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
fputs_filtered (opcode == TERNOP_SLICE ? " : " : " UP ", stream);
print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
fputs_filtered (")", stream);
return;
1991-03-28 17:26:26 +01:00
case STRUCTOP_STRUCT:
* Makefile.in (VERSION): Bump to 4.7.4. * Makefile.in (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c, m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c. * Makefile.in (HFILES): Add valprint.h. * Makefile.in (OBS): Add typeprint.o, c-typeprint.o, m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o. * typeprint.c, typeprint.h: New files for language independent type printing functions. * c-typeprint.c, m2-typeprint.c: New files for language dependent type printing functions and definitions. * valprint.h: New include file for language independent value printing definitions. * c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language dependent value printing functions. * c-exp.y (production ptype): Add range_type variable and use new create_range_type function. * c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab), infcmd.c (path_var_name), language.c (unk_op_print_tab), m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * c-exp.y (c_create_fundamental_type): Remove unused nbytes. * c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type, and c_val_print. * c-lang.h (c_print_type, c_val_print): Add prototypes. * coffread.c (decode_type): Add range_type variable and call to new create_range_type function. * complaints.c (complain): Remove unused val variable. * complaints.c (_initialize_complaints): Make it void. * convex-tdep.c (value_of_trapped_internalvar): Add range_type variable and call new create_range_type function. * defs.h (enum val_prettyprint): Move enum from value.h to here so we can avoid having to include value.h just for prototypes that need the enum (thanks ANSI). * dwarfread.c (struct_type): Local anonymous_size variable is only used if !BITS_BIG_ENDIAN. * dwarfread.c (decode_subscript_data_item): Add rangetype variable and call new create_range_type function. * elfread.c (elf_symfile_read): Remove unused dbx and text_sect variables. * eval.c (evaluate_subexp): Remove unused local variable name and the statement with no side effects that initializes it. * expprint.c (print_subexp): Change local_printstr to LA_PRINT_STRING. * gdbtypes.c (create_range_type): New function that creates a range type using code fragments from object file readers as an example of what has to be initialized. * gdbtypes.c (create_array_type): Removed index_type, low_bound, and high_bound parameters, replaced with a single range_type parameter. Change function body to use passed in range_type rather than handcrafting one. * gdbtypes.h (create_range_type): Add prototype. * gdbtypes.h (create_array_type): Change prototype parameters. * infrun.c (normal_stop): Remove unused local variables tem and c. * infrun.c (hook_stop_stub): Return 0 rather than random value. * language.c (unk_lang_print_type, unk_lang_val_print): Add stub functions that call error if called. * language.c (unknown_language_defn, auto_language_defn, local_language_defn): Add initializers unk_lang_print_type and unk_lang_val_print. * language.h (struct language_defn): Reformat for larger comments, add la_print_type and la_val_print members. Add LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING. * m2-lang.c (m2_create_fundamental_type): Remove unused local variable nbytes. * m2-lang.c (m2_language_defn): Add initializers m2_print_type and m2_val_print. * m2-lang.h (m2_print_type, m2_val_print): Add prototypes. * main.c (execute_command): Remove unused local variable cmdlines. * main.c (echo_command), stabsread.c (read_type), printcmd.c (clear_displays), symmisc.c (block_depth), values.c (clear_value_history): Make testing of truth value of assignment result explicit. * mipsread.c (upgrade_type): Update FIXME to include future use of create_range_type. * printcmd.c (ptype_command, ptype_eval, whatis_command, whatis_exp, maintenance_print_type): Move prototypes and functions to new typeprint.c. * printcmd.c (_initialize_printcmd): Move add_com calls for ptype_command and whatis_command to new typeprint.c. * ser-bsd.c (serial_open): Remove unused variable sgttyb. * source.c (find_source_lines): Local variable c only used when LSEEK_NOT_LINEAR is defined. * stabsread.c (read_array_type): Use new create_range_type function. * stabsread.c (read_range_type): Add new index_type variable and call new create_range_type function rather than handcrafting range types. * symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE. * symtab.c (typedef_print usages): Use c_typedef_print, renamed. * symtab.c (type_print_base usages): Use c_type_print_base. * symtab.c (type_print_varspec_prefix usages): Use c_type_print_varspec_prefix. * symtab.c (type_print_method_args usages): Use cp_type_print_method_args. * valprint.c: Completely ripped apart and the fragments used to create c-valprint.c, cp-valprint.c, m2-valprint.c, and valprint.h. Remaining stuff is language independent. * value.h (struct fn_field): Forward declare for prototypes. * value.h (type_print_1): Remove prototype. * value.h (enum val_prettyprint): Moved to defs.h. * value.h (typedef_print): Prototype renamed to c_typedef_print. * value.h (baseclass_offset): Add prototype. **** start-sanitize-chill **** * Makefile.in (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c. * Makefile.in (OBS): Add ch-typeprint.o, ch-valprint.o. * ch-typeprint.c: New file for language dependent type printing. * ch-valprint.c: New file for language dependent value printing. * ch-exp.y (parse_number): Remove prototype and stub function. * ch-exp.y (decode_integer_literal): Removed unused digits and temp variables. * ch-exp.y (convert_float): Completely ifdef out for now. * ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5), ch-lang.c (chill_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * ch-exp.y (yylex): Add unhandled storage class enumeration literals to switch statement for completeness. * ch-lang.c (chill_create_fundamental_types): Remove unused nbytes variable. Change dummy type to 2 bytes to match int. Handle FT_VOID types gratuituously added to chill DWARF by compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR type rather than a one byte TYPE_CODE_INT type. * ch-lang.c (chill_language_defn): Add chill_print_type and chill_val_print. * ch-lang.h (chill_print_type, chill_val_print): Add prototypes. **** end-sanitize-chill ****
1992-12-18 21:21:32 +01:00
tem = longest_to_int (exp->elts[pc + 1].longconst);
* c-exp.y (exp:STRING): Convert C strings into array-of-char constants with an explicit null byte terminator. OP_STRING is now used for real string types. * c-lang.c (builtin_type_*): Move declarations to lang.c since they are used by all languages. * c-lang.c (_initialize_c_language): Move initializations of builtin_type_* to lang.c. * c-typeprint.c (c_type_print_varspec_prefix, c_type_print_varspec_suffix): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * c-valprint.c (c_val_print): Change the way character arrays are printed as strings to be consistent with the way strings are printed when pointer-to-char types are dereferenced. Remove test of print_max before calling val_print_string, which now does it's own test. * eval.c (evaluate_subexp): Add case for OP_ARRAY. * expprint.c (print_subexp, dump_expression): Add case for OP_ARRAY. * expression.h (enum exp_opcode): Add OP_ARRAY and document. * gdbtypes.c (builtin_type_*): Add declarations moved from c-lang.c. * gdbtypes.c (create_string_type): New function to create real string types. * gdbtypes.c (recursive_dump_type): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * gdbtypes.c (_initialize_gdbtypes): Add initializations of builtin_type_* types moved from c-lang.c. * gdbtypes.h (enum type_code): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * gdbtypes.h (builtin_type_string): Add extern declaration. * gdbtypes.h (create_string_type): Add prototype. * m2-lang.c (m2_create_fundamental_type): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * m88k-tdep.c (pushed_size): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * mipsread.c (_initialize_mipsread): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * parse.c (length_of_subexp, prefixify_subexp): Add case for OP_ARRAY. * printcmd.c (print_formatted): Recognize TYPE_CODE_STRING. * typeprint.c (print_type_scalar): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * valops.c (allocate_space_in_inferior): New function and prototype, using code ripped out of value_string. * valops.c (value_string): Rewritten to use new function allocate_space_in_inferior, but temporarily disabled until some other support is in place. * valops.c (value_array): New function to create array constants. * valprint.c (val_print_string): Add comment to document use, complete rewrite to fix several small buglets. * value.h (value_array): Add prototype. * value.h (val_print_string): Change prototype to match rewrite. **** start-sanitize-chill **** * ch-valprint.c (chill_val_print): Add case for TYPE_CODE_STRING. * ch-exp.y (match_character_literal): Disable recognition of control sequence form of character literals and document why. **** end-sanitize-chill ****
1993-01-16 06:15:58 +01:00
(*pos) += 3 + BYTES_TO_EXP_ELEM (tem + 1);
1991-03-28 17:26:26 +01:00
print_subexp (exp, pos, stream, PREC_SUFFIX);
fputs_filtered (".", stream);
* Makefile.in (VERSION): Bump to 4.7.4. * Makefile.in (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c, m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c. * Makefile.in (HFILES): Add valprint.h. * Makefile.in (OBS): Add typeprint.o, c-typeprint.o, m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o. * typeprint.c, typeprint.h: New files for language independent type printing functions. * c-typeprint.c, m2-typeprint.c: New files for language dependent type printing functions and definitions. * valprint.h: New include file for language independent value printing definitions. * c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language dependent value printing functions. * c-exp.y (production ptype): Add range_type variable and use new create_range_type function. * c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab), infcmd.c (path_var_name), language.c (unk_op_print_tab), m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * c-exp.y (c_create_fundamental_type): Remove unused nbytes. * c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type, and c_val_print. * c-lang.h (c_print_type, c_val_print): Add prototypes. * coffread.c (decode_type): Add range_type variable and call to new create_range_type function. * complaints.c (complain): Remove unused val variable. * complaints.c (_initialize_complaints): Make it void. * convex-tdep.c (value_of_trapped_internalvar): Add range_type variable and call new create_range_type function. * defs.h (enum val_prettyprint): Move enum from value.h to here so we can avoid having to include value.h just for prototypes that need the enum (thanks ANSI). * dwarfread.c (struct_type): Local anonymous_size variable is only used if !BITS_BIG_ENDIAN. * dwarfread.c (decode_subscript_data_item): Add rangetype variable and call new create_range_type function. * elfread.c (elf_symfile_read): Remove unused dbx and text_sect variables. * eval.c (evaluate_subexp): Remove unused local variable name and the statement with no side effects that initializes it. * expprint.c (print_subexp): Change local_printstr to LA_PRINT_STRING. * gdbtypes.c (create_range_type): New function that creates a range type using code fragments from object file readers as an example of what has to be initialized. * gdbtypes.c (create_array_type): Removed index_type, low_bound, and high_bound parameters, replaced with a single range_type parameter. Change function body to use passed in range_type rather than handcrafting one. * gdbtypes.h (create_range_type): Add prototype. * gdbtypes.h (create_array_type): Change prototype parameters. * infrun.c (normal_stop): Remove unused local variables tem and c. * infrun.c (hook_stop_stub): Return 0 rather than random value. * language.c (unk_lang_print_type, unk_lang_val_print): Add stub functions that call error if called. * language.c (unknown_language_defn, auto_language_defn, local_language_defn): Add initializers unk_lang_print_type and unk_lang_val_print. * language.h (struct language_defn): Reformat for larger comments, add la_print_type and la_val_print members. Add LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING. * m2-lang.c (m2_create_fundamental_type): Remove unused local variable nbytes. * m2-lang.c (m2_language_defn): Add initializers m2_print_type and m2_val_print. * m2-lang.h (m2_print_type, m2_val_print): Add prototypes. * main.c (execute_command): Remove unused local variable cmdlines. * main.c (echo_command), stabsread.c (read_type), printcmd.c (clear_displays), symmisc.c (block_depth), values.c (clear_value_history): Make testing of truth value of assignment result explicit. * mipsread.c (upgrade_type): Update FIXME to include future use of create_range_type. * printcmd.c (ptype_command, ptype_eval, whatis_command, whatis_exp, maintenance_print_type): Move prototypes and functions to new typeprint.c. * printcmd.c (_initialize_printcmd): Move add_com calls for ptype_command and whatis_command to new typeprint.c. * ser-bsd.c (serial_open): Remove unused variable sgttyb. * source.c (find_source_lines): Local variable c only used when LSEEK_NOT_LINEAR is defined. * stabsread.c (read_array_type): Use new create_range_type function. * stabsread.c (read_range_type): Add new index_type variable and call new create_range_type function rather than handcrafting range types. * symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE. * symtab.c (typedef_print usages): Use c_typedef_print, renamed. * symtab.c (type_print_base usages): Use c_type_print_base. * symtab.c (type_print_varspec_prefix usages): Use c_type_print_varspec_prefix. * symtab.c (type_print_method_args usages): Use cp_type_print_method_args. * valprint.c: Completely ripped apart and the fragments used to create c-valprint.c, cp-valprint.c, m2-valprint.c, and valprint.h. Remaining stuff is language independent. * value.h (struct fn_field): Forward declare for prototypes. * value.h (type_print_1): Remove prototype. * value.h (enum val_prettyprint): Moved to defs.h. * value.h (typedef_print): Prototype renamed to c_typedef_print. * value.h (baseclass_offset): Add prototype. **** start-sanitize-chill **** * Makefile.in (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c. * Makefile.in (OBS): Add ch-typeprint.o, ch-valprint.o. * ch-typeprint.c: New file for language dependent type printing. * ch-valprint.c: New file for language dependent value printing. * ch-exp.y (parse_number): Remove prototype and stub function. * ch-exp.y (decode_integer_literal): Removed unused digits and temp variables. * ch-exp.y (convert_float): Completely ifdef out for now. * ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5), ch-lang.c (chill_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * ch-exp.y (yylex): Add unhandled storage class enumeration literals to switch statement for completeness. * ch-lang.c (chill_create_fundamental_types): Remove unused nbytes variable. Change dummy type to 2 bytes to match int. Handle FT_VOID types gratuituously added to chill DWARF by compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR type rather than a one byte TYPE_CODE_INT type. * ch-lang.c (chill_language_defn): Add chill_print_type and chill_val_print. * ch-lang.h (chill_print_type, chill_val_print): Add prototypes. **** end-sanitize-chill ****
1992-12-18 21:21:32 +01:00
fputs_filtered (&exp->elts[pc + 2].string, stream);
1991-03-28 17:26:26 +01:00
return;
/* Will not occur for Modula-2 */
1991-03-28 17:26:26 +01:00
case STRUCTOP_PTR:
* Makefile.in (VERSION): Bump to 4.7.4. * Makefile.in (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c, m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c. * Makefile.in (HFILES): Add valprint.h. * Makefile.in (OBS): Add typeprint.o, c-typeprint.o, m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o. * typeprint.c, typeprint.h: New files for language independent type printing functions. * c-typeprint.c, m2-typeprint.c: New files for language dependent type printing functions and definitions. * valprint.h: New include file for language independent value printing definitions. * c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language dependent value printing functions. * c-exp.y (production ptype): Add range_type variable and use new create_range_type function. * c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab), infcmd.c (path_var_name), language.c (unk_op_print_tab), m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * c-exp.y (c_create_fundamental_type): Remove unused nbytes. * c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type, and c_val_print. * c-lang.h (c_print_type, c_val_print): Add prototypes. * coffread.c (decode_type): Add range_type variable and call to new create_range_type function. * complaints.c (complain): Remove unused val variable. * complaints.c (_initialize_complaints): Make it void. * convex-tdep.c (value_of_trapped_internalvar): Add range_type variable and call new create_range_type function. * defs.h (enum val_prettyprint): Move enum from value.h to here so we can avoid having to include value.h just for prototypes that need the enum (thanks ANSI). * dwarfread.c (struct_type): Local anonymous_size variable is only used if !BITS_BIG_ENDIAN. * dwarfread.c (decode_subscript_data_item): Add rangetype variable and call new create_range_type function. * elfread.c (elf_symfile_read): Remove unused dbx and text_sect variables. * eval.c (evaluate_subexp): Remove unused local variable name and the statement with no side effects that initializes it. * expprint.c (print_subexp): Change local_printstr to LA_PRINT_STRING. * gdbtypes.c (create_range_type): New function that creates a range type using code fragments from object file readers as an example of what has to be initialized. * gdbtypes.c (create_array_type): Removed index_type, low_bound, and high_bound parameters, replaced with a single range_type parameter. Change function body to use passed in range_type rather than handcrafting one. * gdbtypes.h (create_range_type): Add prototype. * gdbtypes.h (create_array_type): Change prototype parameters. * infrun.c (normal_stop): Remove unused local variables tem and c. * infrun.c (hook_stop_stub): Return 0 rather than random value. * language.c (unk_lang_print_type, unk_lang_val_print): Add stub functions that call error if called. * language.c (unknown_language_defn, auto_language_defn, local_language_defn): Add initializers unk_lang_print_type and unk_lang_val_print. * language.h (struct language_defn): Reformat for larger comments, add la_print_type and la_val_print members. Add LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING. * m2-lang.c (m2_create_fundamental_type): Remove unused local variable nbytes. * m2-lang.c (m2_language_defn): Add initializers m2_print_type and m2_val_print. * m2-lang.h (m2_print_type, m2_val_print): Add prototypes. * main.c (execute_command): Remove unused local variable cmdlines. * main.c (echo_command), stabsread.c (read_type), printcmd.c (clear_displays), symmisc.c (block_depth), values.c (clear_value_history): Make testing of truth value of assignment result explicit. * mipsread.c (upgrade_type): Update FIXME to include future use of create_range_type. * printcmd.c (ptype_command, ptype_eval, whatis_command, whatis_exp, maintenance_print_type): Move prototypes and functions to new typeprint.c. * printcmd.c (_initialize_printcmd): Move add_com calls for ptype_command and whatis_command to new typeprint.c. * ser-bsd.c (serial_open): Remove unused variable sgttyb. * source.c (find_source_lines): Local variable c only used when LSEEK_NOT_LINEAR is defined. * stabsread.c (read_array_type): Use new create_range_type function. * stabsread.c (read_range_type): Add new index_type variable and call new create_range_type function rather than handcrafting range types. * symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE. * symtab.c (typedef_print usages): Use c_typedef_print, renamed. * symtab.c (type_print_base usages): Use c_type_print_base. * symtab.c (type_print_varspec_prefix usages): Use c_type_print_varspec_prefix. * symtab.c (type_print_method_args usages): Use cp_type_print_method_args. * valprint.c: Completely ripped apart and the fragments used to create c-valprint.c, cp-valprint.c, m2-valprint.c, and valprint.h. Remaining stuff is language independent. * value.h (struct fn_field): Forward declare for prototypes. * value.h (type_print_1): Remove prototype. * value.h (enum val_prettyprint): Moved to defs.h. * value.h (typedef_print): Prototype renamed to c_typedef_print. * value.h (baseclass_offset): Add prototype. **** start-sanitize-chill **** * Makefile.in (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c. * Makefile.in (OBS): Add ch-typeprint.o, ch-valprint.o. * ch-typeprint.c: New file for language dependent type printing. * ch-valprint.c: New file for language dependent value printing. * ch-exp.y (parse_number): Remove prototype and stub function. * ch-exp.y (decode_integer_literal): Removed unused digits and temp variables. * ch-exp.y (convert_float): Completely ifdef out for now. * ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5), ch-lang.c (chill_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * ch-exp.y (yylex): Add unhandled storage class enumeration literals to switch statement for completeness. * ch-lang.c (chill_create_fundamental_types): Remove unused nbytes variable. Change dummy type to 2 bytes to match int. Handle FT_VOID types gratuituously added to chill DWARF by compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR type rather than a one byte TYPE_CODE_INT type. * ch-lang.c (chill_language_defn): Add chill_print_type and chill_val_print. * ch-lang.h (chill_print_type, chill_val_print): Add prototypes. **** end-sanitize-chill ****
1992-12-18 21:21:32 +01:00
tem = longest_to_int (exp->elts[pc + 1].longconst);
* c-exp.y (exp:STRING): Convert C strings into array-of-char constants with an explicit null byte terminator. OP_STRING is now used for real string types. * c-lang.c (builtin_type_*): Move declarations to lang.c since they are used by all languages. * c-lang.c (_initialize_c_language): Move initializations of builtin_type_* to lang.c. * c-typeprint.c (c_type_print_varspec_prefix, c_type_print_varspec_suffix): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * c-valprint.c (c_val_print): Change the way character arrays are printed as strings to be consistent with the way strings are printed when pointer-to-char types are dereferenced. Remove test of print_max before calling val_print_string, which now does it's own test. * eval.c (evaluate_subexp): Add case for OP_ARRAY. * expprint.c (print_subexp, dump_expression): Add case for OP_ARRAY. * expression.h (enum exp_opcode): Add OP_ARRAY and document. * gdbtypes.c (builtin_type_*): Add declarations moved from c-lang.c. * gdbtypes.c (create_string_type): New function to create real string types. * gdbtypes.c (recursive_dump_type): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * gdbtypes.c (_initialize_gdbtypes): Add initializations of builtin_type_* types moved from c-lang.c. * gdbtypes.h (enum type_code): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * gdbtypes.h (builtin_type_string): Add extern declaration. * gdbtypes.h (create_string_type): Add prototype. * m2-lang.c (m2_create_fundamental_type): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * m88k-tdep.c (pushed_size): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * mipsread.c (_initialize_mipsread): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * parse.c (length_of_subexp, prefixify_subexp): Add case for OP_ARRAY. * printcmd.c (print_formatted): Recognize TYPE_CODE_STRING. * typeprint.c (print_type_scalar): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * valops.c (allocate_space_in_inferior): New function and prototype, using code ripped out of value_string. * valops.c (value_string): Rewritten to use new function allocate_space_in_inferior, but temporarily disabled until some other support is in place. * valops.c (value_array): New function to create array constants. * valprint.c (val_print_string): Add comment to document use, complete rewrite to fix several small buglets. * value.h (value_array): Add prototype. * value.h (val_print_string): Change prototype to match rewrite. **** start-sanitize-chill **** * ch-valprint.c (chill_val_print): Add case for TYPE_CODE_STRING. * ch-exp.y (match_character_literal): Disable recognition of control sequence form of character literals and document why. **** end-sanitize-chill ****
1993-01-16 06:15:58 +01:00
(*pos) += 3 + BYTES_TO_EXP_ELEM (tem + 1);
1991-03-28 17:26:26 +01:00
print_subexp (exp, pos, stream, PREC_SUFFIX);
fputs_filtered ("->", stream);
* Makefile.in (VERSION): Bump to 4.7.4. * Makefile.in (SFILES_MAINDIR): Add typeprint.c, c-typeprint.c, m2-typeprint.c, c-valprint.c cp-valprint.c m2-valprint.c. * Makefile.in (HFILES): Add valprint.h. * Makefile.in (OBS): Add typeprint.o, c-typeprint.o, m2-typeprint.o, c-valprint.o, cp-valprint.o m2-valprint.o. * typeprint.c, typeprint.h: New files for language independent type printing functions. * c-typeprint.c, m2-typeprint.c: New files for language dependent type printing functions and definitions. * valprint.h: New include file for language independent value printing definitions. * c-valprint.c, cp-valprint.c, m2-valprint.c: New files for language dependent value printing functions. * c-exp.y (production ptype): Add range_type variable and use new create_range_type function. * c-exp.y (tokentab2, tokentab3), c-lang.c (c_op_print_tab), infcmd.c (path_var_name), language.c (unk_op_print_tab), m2-lang.c (m2_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * c-exp.y (c_create_fundamental_type): Remove unused nbytes. * c-exp.y (c_language_defn, cplus_language_defn): Add c_print_type, and c_val_print. * c-lang.h (c_print_type, c_val_print): Add prototypes. * coffread.c (decode_type): Add range_type variable and call to new create_range_type function. * complaints.c (complain): Remove unused val variable. * complaints.c (_initialize_complaints): Make it void. * convex-tdep.c (value_of_trapped_internalvar): Add range_type variable and call new create_range_type function. * defs.h (enum val_prettyprint): Move enum from value.h to here so we can avoid having to include value.h just for prototypes that need the enum (thanks ANSI). * dwarfread.c (struct_type): Local anonymous_size variable is only used if !BITS_BIG_ENDIAN. * dwarfread.c (decode_subscript_data_item): Add rangetype variable and call new create_range_type function. * elfread.c (elf_symfile_read): Remove unused dbx and text_sect variables. * eval.c (evaluate_subexp): Remove unused local variable name and the statement with no side effects that initializes it. * expprint.c (print_subexp): Change local_printstr to LA_PRINT_STRING. * gdbtypes.c (create_range_type): New function that creates a range type using code fragments from object file readers as an example of what has to be initialized. * gdbtypes.c (create_array_type): Removed index_type, low_bound, and high_bound parameters, replaced with a single range_type parameter. Change function body to use passed in range_type rather than handcrafting one. * gdbtypes.h (create_range_type): Add prototype. * gdbtypes.h (create_array_type): Change prototype parameters. * infrun.c (normal_stop): Remove unused local variables tem and c. * infrun.c (hook_stop_stub): Return 0 rather than random value. * language.c (unk_lang_print_type, unk_lang_val_print): Add stub functions that call error if called. * language.c (unknown_language_defn, auto_language_defn, local_language_defn): Add initializers unk_lang_print_type and unk_lang_val_print. * language.h (struct language_defn): Reformat for larger comments, add la_print_type and la_val_print members. Add LA_PRINT_TYPE and LA_VAL_PRINT macros. Change local_printchar to LA_PRINT_CHAR and local_printstr to LA_PRINT_STRING. * m2-lang.c (m2_create_fundamental_type): Remove unused local variable nbytes. * m2-lang.c (m2_language_defn): Add initializers m2_print_type and m2_val_print. * m2-lang.h (m2_print_type, m2_val_print): Add prototypes. * main.c (execute_command): Remove unused local variable cmdlines. * main.c (echo_command), stabsread.c (read_type), printcmd.c (clear_displays), symmisc.c (block_depth), values.c (clear_value_history): Make testing of truth value of assignment result explicit. * mipsread.c (upgrade_type): Update FIXME to include future use of create_range_type. * printcmd.c (ptype_command, ptype_eval, whatis_command, whatis_exp, maintenance_print_type): Move prototypes and functions to new typeprint.c. * printcmd.c (_initialize_printcmd): Move add_com calls for ptype_command and whatis_command to new typeprint.c. * ser-bsd.c (serial_open): Remove unused variable sgttyb. * source.c (find_source_lines): Local variable c only used when LSEEK_NOT_LINEAR is defined. * stabsread.c (read_array_type): Use new create_range_type function. * stabsread.c (read_range_type): Add new index_type variable and call new create_range_type function rather than handcrafting range types. * symmisc.c (type_print_1): Change usages to LA_PRINT_TYPE. * symtab.c (typedef_print usages): Use c_typedef_print, renamed. * symtab.c (type_print_base usages): Use c_type_print_base. * symtab.c (type_print_varspec_prefix usages): Use c_type_print_varspec_prefix. * symtab.c (type_print_method_args usages): Use cp_type_print_method_args. * valprint.c: Completely ripped apart and the fragments used to create c-valprint.c, cp-valprint.c, m2-valprint.c, and valprint.h. Remaining stuff is language independent. * value.h (struct fn_field): Forward declare for prototypes. * value.h (type_print_1): Remove prototype. * value.h (enum val_prettyprint): Moved to defs.h. * value.h (typedef_print): Prototype renamed to c_typedef_print. * value.h (baseclass_offset): Add prototype. **** start-sanitize-chill **** * Makefile.in (SFILES_MAINDIR): Add ch-typeprint.c, ch-valprint.c. * Makefile.in (OBS): Add ch-typeprint.o, ch-valprint.o. * ch-typeprint.c: New file for language dependent type printing. * ch-valprint.c: New file for language dependent value printing. * ch-exp.y (parse_number): Remove prototype and stub function. * ch-exp.y (decode_integer_literal): Removed unused digits and temp variables. * ch-exp.y (convert_float): Completely ifdef out for now. * ch-exp.y (tokentab2, tokentab3, tokentab4, tokentab5), ch-lang.c (chill_op_print_tab): Change from ANSI-obsolescent "const static" to ANSI-conformant "static const". * ch-exp.y (yylex): Add unhandled storage class enumeration literals to switch statement for completeness. * ch-lang.c (chill_create_fundamental_types): Remove unused nbytes variable. Change dummy type to 2 bytes to match int. Handle FT_VOID types gratuituously added to chill DWARF by compiler. Change FT_CHAR case to generate an TYPE_CODE_CHAR type rather than a one byte TYPE_CODE_INT type. * ch-lang.c (chill_language_defn): Add chill_print_type and chill_val_print. * ch-lang.h (chill_print_type, chill_val_print): Add prototypes. **** end-sanitize-chill ****
1992-12-18 21:21:32 +01:00
fputs_filtered (&exp->elts[pc + 2].string, stream);
1991-03-28 17:26:26 +01:00
return;
* breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET around calls to create_longjmp_breakpoint. Why install the breakpoints if we can't find the longjmp target? * infrun.c (wait_for_inferior): Cleanup comments near call test. * remote-mips.c: Fixed a bunch of prototypes to avoid char/int complaint from picky compilers. Add comment to mips_expect. Replace all instances of sr_get_debug with remote_debug. * (mips_readchar): Don't jam init string to monitor. mips_initialize() handles that. * (mips_receive_header): Print better message when we get too much garbage. * (mips_request): Allow caller to pass in buff to allow them to analyze the returned message. * (mips_initialize): Re-do initialization to try sending a BREAK, a ^C, and then a download escape sequence. Cleanup protocol startup. Eliminate sleeps. Clear breakpoints (if using monitor breakpoints). Re-init frame. * (mips_detach): Close down target. start-sanitize-gm * (mips_resume): Pass signal down to target. * (mips_create_inferior): Start target with TARGET_SIGNAL_PWR. end-sanitize-gm * (mips_wait): Handle return status with registers, or breakpoint stuff. * (mips_kill): Add ^C handling. * (mips_insert_breakpoint mips_remove_breakpoint): Call new breakpoint stuff if enabled. * (calculate_mask remote_mips_set_watchpoint remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint): Hardware watchpoint/breakpoint stuff. * (common_breakpoint): Common code for new monitor breakpoint commands. * (mips_load): Don't use `prompt'. It's a global variable. * top.c (dont_repeat_command): New command for use in user-defined commands to suppress auto-repeat (by hittin return key). start-sanitize-gm * utils.c (request_quit): Call target_kill here. Good idea. Needs a better implementation. end-sanitize-gm * valops.c: Add start of auto function-call abandonment capability. start-sanitize-gm * c-exp.y: Add code (currently disabled) to handle GM dynamic structures (it conflicts with @!). * eval.c (evaluate_subexp_standard): ditto. * expprint.c (print_subexp dump_expression): ditto. * expression.h (enum exp_opcode): ditto. * parse.c (length_of_subexp): ditto. * configure, configure.in: Add mip*-*-magic* target. * magic.c magic.h: Special routines to handle GM stuff (like stepping through dispatcher). end-sanitize-gm
1995-10-27 18:48:36 +01:00
/* start-sanitize-gm */
#ifdef GENERAL_MAGIC_HACKS
case STRUCTOP_FIELD:
tem = longest_to_int (exp->elts[pc + 1].longconst);
(*pos) += 3 + BYTES_TO_EXP_ELEM (tem + 1);
print_subexp (exp, pos, stream, PREC_SUFFIX);
fputs_filtered ("@", stream);
fputs_filtered (&exp->elts[pc + 2].string, stream);
return;
#endif /* GENERAL_MAGIC_HACKS */
/* end-sanitize-gm */
1991-03-28 17:26:26 +01:00
case BINOP_SUBSCRIPT:
print_subexp (exp, pos, stream, PREC_SUFFIX);
fputs_filtered ("[", stream);
1991-03-28 17:26:26 +01:00
print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
fputs_filtered ("]", stream);
1991-03-28 17:26:26 +01:00
return;
case UNOP_POSTINCREMENT:
print_subexp (exp, pos, stream, PREC_SUFFIX);
fputs_filtered ("++", stream);
1991-03-28 17:26:26 +01:00
return;
case UNOP_POSTDECREMENT:
print_subexp (exp, pos, stream, PREC_SUFFIX);
fputs_filtered ("--", stream);
1991-03-28 17:26:26 +01:00
return;
case UNOP_CAST:
(*pos) += 2;
if ((int) prec > (int) PREC_PREFIX)
fputs_filtered ("(", stream);
fputs_filtered ("(", stream);
1991-03-28 17:26:26 +01:00
type_print (exp->elts[pc + 1].type, "", stream, 0);
fputs_filtered (") ", stream);
1991-03-28 17:26:26 +01:00
print_subexp (exp, pos, stream, PREC_PREFIX);
if ((int) prec > (int) PREC_PREFIX)
fputs_filtered (")", stream);
1991-03-28 17:26:26 +01:00
return;
case UNOP_MEMVAL:
(*pos) += 2;
if ((int) prec > (int) PREC_PREFIX)
fputs_filtered ("(", stream);
if (exp->elts[pc + 1].type->code == TYPE_CODE_FUNC &&
exp->elts[pc + 3].opcode == OP_LONG) {
/* We have a minimal symbol fn, probably. It's encoded
as a UNOP_MEMVAL (function-type) of an OP_LONG (int, address).
Swallow the OP_LONG (including both its opcodes); ignore
its type; print the value in the type of the MEMVAL. */
(*pos) += 4;
val = value_at_lazy (exp->elts[pc + 1].type,
(CORE_ADDR) exp->elts[pc + 5].longconst);
value_print (val, stream, 0, Val_no_prettyprint);
} else {
fputs_filtered ("{", stream);
type_print (exp->elts[pc + 1].type, "", stream, 0);
fputs_filtered ("} ", stream);
print_subexp (exp, pos, stream, PREC_PREFIX);
}
1991-03-28 17:26:26 +01:00
if ((int) prec > (int) PREC_PREFIX)
fputs_filtered (")", stream);
1991-03-28 17:26:26 +01:00
return;
case BINOP_ASSIGN_MODIFY:
opcode = exp->elts[pc + 1].opcode;
(*pos) += 2;
myprec = PREC_ASSIGN;
assoc = 1;
assign_modify = 1;
op_str = "???";
for (tem = 0; op_print_tab[tem].opcode != OP_NULL; tem++)
1991-03-28 17:26:26 +01:00
if (op_print_tab[tem].opcode == opcode)
{
op_str = op_print_tab[tem].string;
break;
}
if (op_print_tab[tem].opcode != opcode)
/* Not found; don't try to keep going because we don't know how
to interpret further elements. */
error ("Invalid expression");
break;
1991-03-28 17:26:26 +01:00
/* C++ ops */
1991-03-28 17:26:26 +01:00
case OP_THIS:
++(*pos);
fputs_filtered ("this", stream);
1991-03-28 17:26:26 +01:00
return;
/* Modula-2 ops */
case MULTI_SUBSCRIPT:
(*pos) += 2;
nargs = longest_to_int (exp->elts[pc + 1].longconst);
print_subexp (exp, pos, stream, PREC_SUFFIX);
fprintf_unfiltered (stream, " [");
for (tem = 0; tem < nargs; tem++)
{
if (tem != 0)
fprintf_unfiltered (stream, ", ");
print_subexp (exp, pos, stream, PREC_ABOVE_COMMA);
}
fprintf_unfiltered (stream, "]");
return;
case BINOP_VAL:
(*pos)+=2;
fprintf_unfiltered(stream,"VAL(");
type_print(exp->elts[pc+1].type,"",stream,0);
fprintf_unfiltered(stream,",");
print_subexp(exp,pos,stream,PREC_PREFIX);
fprintf_unfiltered(stream,")");
return;
case BINOP_INCL:
case BINOP_EXCL:
error("print_subexp: Not implemented.");
/* Default ops */
1991-03-28 17:26:26 +01:00
default:
op_str = "???";
for (tem = 0; op_print_tab[tem].opcode != OP_NULL; tem++)
1991-03-28 17:26:26 +01:00
if (op_print_tab[tem].opcode == opcode)
{
op_str = op_print_tab[tem].string;
myprec = op_print_tab[tem].precedence;
assoc = op_print_tab[tem].right_assoc;
break;
}
if (op_print_tab[tem].opcode != opcode)
/* Not found; don't try to keep going because we don't know how
to interpret further elements. For example, this happens
if opcode is OP_TYPE. */
error ("Invalid expression");
}
1991-03-28 17:26:26 +01:00
* breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET around calls to create_longjmp_breakpoint. Why install the breakpoints if we can't find the longjmp target? * infrun.c (wait_for_inferior): Cleanup comments near call test. * remote-mips.c: Fixed a bunch of prototypes to avoid char/int complaint from picky compilers. Add comment to mips_expect. Replace all instances of sr_get_debug with remote_debug. * (mips_readchar): Don't jam init string to monitor. mips_initialize() handles that. * (mips_receive_header): Print better message when we get too much garbage. * (mips_request): Allow caller to pass in buff to allow them to analyze the returned message. * (mips_initialize): Re-do initialization to try sending a BREAK, a ^C, and then a download escape sequence. Cleanup protocol startup. Eliminate sleeps. Clear breakpoints (if using monitor breakpoints). Re-init frame. * (mips_detach): Close down target. start-sanitize-gm * (mips_resume): Pass signal down to target. * (mips_create_inferior): Start target with TARGET_SIGNAL_PWR. end-sanitize-gm * (mips_wait): Handle return status with registers, or breakpoint stuff. * (mips_kill): Add ^C handling. * (mips_insert_breakpoint mips_remove_breakpoint): Call new breakpoint stuff if enabled. * (calculate_mask remote_mips_set_watchpoint remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint): Hardware watchpoint/breakpoint stuff. * (common_breakpoint): Common code for new monitor breakpoint commands. * (mips_load): Don't use `prompt'. It's a global variable. * top.c (dont_repeat_command): New command for use in user-defined commands to suppress auto-repeat (by hittin return key). start-sanitize-gm * utils.c (request_quit): Call target_kill here. Good idea. Needs a better implementation. end-sanitize-gm * valops.c: Add start of auto function-call abandonment capability. start-sanitize-gm * c-exp.y: Add code (currently disabled) to handle GM dynamic structures (it conflicts with @!). * eval.c (evaluate_subexp_standard): ditto. * expprint.c (print_subexp dump_expression): ditto. * expression.h (enum exp_opcode): ditto. * parse.c (length_of_subexp): ditto. * configure, configure.in: Add mip*-*-magic* target. * magic.c magic.h: Special routines to handle GM stuff (like stepping through dispatcher). end-sanitize-gm
1995-10-27 18:48:36 +01:00
/* Note that PREC_BUILTIN will always emit parentheses. */
1991-03-28 17:26:26 +01:00
if ((int) myprec < (int) prec)
fputs_filtered ("(", stream);
1991-03-28 17:26:26 +01:00
if ((int) opcode > (int) BINOP_END)
{
if (assoc)
{
/* Unary postfix operator. */
print_subexp (exp, pos, stream, PREC_SUFFIX);
fputs_filtered (op_str, stream);
}
else
{
/* Unary prefix operator. */
fputs_filtered (op_str, stream);
* breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET around calls to create_longjmp_breakpoint. Why install the breakpoints if we can't find the longjmp target? * infrun.c (wait_for_inferior): Cleanup comments near call test. * remote-mips.c: Fixed a bunch of prototypes to avoid char/int complaint from picky compilers. Add comment to mips_expect. Replace all instances of sr_get_debug with remote_debug. * (mips_readchar): Don't jam init string to monitor. mips_initialize() handles that. * (mips_receive_header): Print better message when we get too much garbage. * (mips_request): Allow caller to pass in buff to allow them to analyze the returned message. * (mips_initialize): Re-do initialization to try sending a BREAK, a ^C, and then a download escape sequence. Cleanup protocol startup. Eliminate sleeps. Clear breakpoints (if using monitor breakpoints). Re-init frame. * (mips_detach): Close down target. start-sanitize-gm * (mips_resume): Pass signal down to target. * (mips_create_inferior): Start target with TARGET_SIGNAL_PWR. end-sanitize-gm * (mips_wait): Handle return status with registers, or breakpoint stuff. * (mips_kill): Add ^C handling. * (mips_insert_breakpoint mips_remove_breakpoint): Call new breakpoint stuff if enabled. * (calculate_mask remote_mips_set_watchpoint remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint): Hardware watchpoint/breakpoint stuff. * (common_breakpoint): Common code for new monitor breakpoint commands. * (mips_load): Don't use `prompt'. It's a global variable. * top.c (dont_repeat_command): New command for use in user-defined commands to suppress auto-repeat (by hittin return key). start-sanitize-gm * utils.c (request_quit): Call target_kill here. Good idea. Needs a better implementation. end-sanitize-gm * valops.c: Add start of auto function-call abandonment capability. start-sanitize-gm * c-exp.y: Add code (currently disabled) to handle GM dynamic structures (it conflicts with @!). * eval.c (evaluate_subexp_standard): ditto. * expprint.c (print_subexp dump_expression): ditto. * expression.h (enum exp_opcode): ditto. * parse.c (length_of_subexp): ditto. * configure, configure.in: Add mip*-*-magic* target. * magic.c magic.h: Special routines to handle GM stuff (like stepping through dispatcher). end-sanitize-gm
1995-10-27 18:48:36 +01:00
if (myprec == PREC_BUILTIN_FUNCTION)
fputs_filtered ("(", stream);
print_subexp (exp, pos, stream, PREC_PREFIX);
* breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET around calls to create_longjmp_breakpoint. Why install the breakpoints if we can't find the longjmp target? * infrun.c (wait_for_inferior): Cleanup comments near call test. * remote-mips.c: Fixed a bunch of prototypes to avoid char/int complaint from picky compilers. Add comment to mips_expect. Replace all instances of sr_get_debug with remote_debug. * (mips_readchar): Don't jam init string to monitor. mips_initialize() handles that. * (mips_receive_header): Print better message when we get too much garbage. * (mips_request): Allow caller to pass in buff to allow them to analyze the returned message. * (mips_initialize): Re-do initialization to try sending a BREAK, a ^C, and then a download escape sequence. Cleanup protocol startup. Eliminate sleeps. Clear breakpoints (if using monitor breakpoints). Re-init frame. * (mips_detach): Close down target. start-sanitize-gm * (mips_resume): Pass signal down to target. * (mips_create_inferior): Start target with TARGET_SIGNAL_PWR. end-sanitize-gm * (mips_wait): Handle return status with registers, or breakpoint stuff. * (mips_kill): Add ^C handling. * (mips_insert_breakpoint mips_remove_breakpoint): Call new breakpoint stuff if enabled. * (calculate_mask remote_mips_set_watchpoint remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint): Hardware watchpoint/breakpoint stuff. * (common_breakpoint): Common code for new monitor breakpoint commands. * (mips_load): Don't use `prompt'. It's a global variable. * top.c (dont_repeat_command): New command for use in user-defined commands to suppress auto-repeat (by hittin return key). start-sanitize-gm * utils.c (request_quit): Call target_kill here. Good idea. Needs a better implementation. end-sanitize-gm * valops.c: Add start of auto function-call abandonment capability. start-sanitize-gm * c-exp.y: Add code (currently disabled) to handle GM dynamic structures (it conflicts with @!). * eval.c (evaluate_subexp_standard): ditto. * expprint.c (print_subexp dump_expression): ditto. * expression.h (enum exp_opcode): ditto. * parse.c (length_of_subexp): ditto. * configure, configure.in: Add mip*-*-magic* target. * magic.c magic.h: Special routines to handle GM stuff (like stepping through dispatcher). end-sanitize-gm
1995-10-27 18:48:36 +01:00
if (myprec == PREC_BUILTIN_FUNCTION)
fputs_filtered (")", stream);
}
1991-03-28 17:26:26 +01:00
}
else
{
/* Binary operator. */
/* Print left operand.
If operator is right-associative,
increment precedence for this operand. */
print_subexp (exp, pos, stream,
(enum precedence) ((int) myprec + assoc));
1991-03-28 17:26:26 +01:00
/* Print the operator itself. */
if (assign_modify)
fprintf_filtered (stream, " %s= ", op_str);
1991-03-28 17:26:26 +01:00
else if (op_str[0] == ',')
fprintf_filtered (stream, "%s ", op_str);
1991-03-28 17:26:26 +01:00
else
fprintf_filtered (stream, " %s ", op_str);
1991-03-28 17:26:26 +01:00
/* Print right operand.
If operator is left-associative,
increment precedence for this operand. */
print_subexp (exp, pos, stream,
(enum precedence) ((int) myprec + !assoc));
1991-03-28 17:26:26 +01:00
}
1991-03-28 17:26:26 +01:00
if ((int) myprec < (int) prec)
fputs_filtered (")", stream);
1991-03-28 17:26:26 +01:00
}
/* Return the operator corresponding to opcode OP as
a string. NULL indicates that the opcode was not found in the
current language table. */
char *
op_string(op)
enum exp_opcode op;
{
int tem;
register const struct op_print *op_print_tab;
op_print_tab = current_language->la_op_print_tab;
for (tem = 0; op_print_tab[tem].opcode != OP_NULL; tem++)
if (op_print_tab[tem].opcode == op)
return op_print_tab[tem].string;
return NULL;
}
#ifdef DEBUG_EXPRESSIONS
/* Support for dumping the raw data from expressions in a human readable
form. */
void
dump_expression (exp, stream, note)
struct expression *exp;
GDB_FILE *stream;
char *note;
{
int elt;
char *opcode_name;
char *eltscan;
int eltsize;
fprintf_filtered (stream, "Dump of expression @ ");
gdb_print_address (exp, stream);
fprintf_filtered (stream, ", %s:\n", note);
fprintf_filtered (stream, "\tLanguage %s, %d elements, %d bytes each.\n",
exp->language_defn->la_name, exp -> nelts,
sizeof (union exp_element));
fprintf_filtered (stream, "\t%5s %20s %16s %s\n", "Index", "Opcode",
"Hex Value", "String Value");
for (elt = 0; elt < exp -> nelts; elt++)
{
fprintf_filtered (stream, "\t%5d ", elt);
switch (exp -> elts[elt].opcode)
{
default: opcode_name = "<unknown>"; break;
case OP_NULL: opcode_name = "OP_NULL"; break;
case BINOP_ADD: opcode_name = "BINOP_ADD"; break;
case BINOP_SUB: opcode_name = "BINOP_SUB"; break;
case BINOP_MUL: opcode_name = "BINOP_MUL"; break;
case BINOP_DIV: opcode_name = "BINOP_DIV"; break;
case BINOP_REM: opcode_name = "BINOP_REM"; break;
case BINOP_MOD: opcode_name = "BINOP_MOD"; break;
case BINOP_LSH: opcode_name = "BINOP_LSH"; break;
case BINOP_RSH: opcode_name = "BINOP_RSH"; break;
case BINOP_LOGICAL_AND: opcode_name = "BINOP_LOGICAL_AND"; break;
case BINOP_LOGICAL_OR: opcode_name = "BINOP_LOGICAL_OR"; break;
case BINOP_BITWISE_AND: opcode_name = "BINOP_BITWISE_AND"; break;
case BINOP_BITWISE_IOR: opcode_name = "BINOP_BITWISE_IOR"; break;
case BINOP_BITWISE_XOR: opcode_name = "BINOP_BITWISE_XOR"; break;
case BINOP_EQUAL: opcode_name = "BINOP_EQUAL"; break;
case BINOP_NOTEQUAL: opcode_name = "BINOP_NOTEQUAL"; break;
case BINOP_LESS: opcode_name = "BINOP_LESS"; break;
case BINOP_GTR: opcode_name = "BINOP_GTR"; break;
case BINOP_LEQ: opcode_name = "BINOP_LEQ"; break;
case BINOP_GEQ: opcode_name = "BINOP_GEQ"; break;
case BINOP_REPEAT: opcode_name = "BINOP_REPEAT"; break;
case BINOP_ASSIGN: opcode_name = "BINOP_ASSIGN"; break;
case BINOP_COMMA: opcode_name = "BINOP_COMMA"; break;
case BINOP_SUBSCRIPT: opcode_name = "BINOP_SUBSCRIPT"; break;
case MULTI_SUBSCRIPT: opcode_name = "MULTI_SUBSCRIPT"; break;
case BINOP_EXP: opcode_name = "BINOP_EXP"; break;
case BINOP_MIN: opcode_name = "BINOP_MIN"; break;
case BINOP_MAX: opcode_name = "BINOP_MAX"; break;
case BINOP_SCOPE: opcode_name = "BINOP_SCOPE"; break;
case STRUCTOP_MEMBER: opcode_name = "STRUCTOP_MEMBER"; break;
case STRUCTOP_MPTR: opcode_name = "STRUCTOP_MPTR"; break;
case BINOP_INTDIV: opcode_name = "BINOP_INTDIV"; break;
case BINOP_ASSIGN_MODIFY: opcode_name = "BINOP_ASSIGN_MODIFY"; break;
case BINOP_VAL: opcode_name = "BINOP_VAL"; break;
case BINOP_INCL: opcode_name = "BINOP_INCL"; break;
case BINOP_EXCL: opcode_name = "BINOP_EXCL"; break;
case BINOP_CONCAT: opcode_name = "BINOP_CONCAT"; break;
case BINOP_END: opcode_name = "BINOP_END"; break;
case TERNOP_COND: opcode_name = "TERNOP_COND"; break;
* breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET around calls to create_longjmp_breakpoint. Why install the breakpoints if we can't find the longjmp target? * infrun.c (wait_for_inferior): Cleanup comments near call test. * remote-mips.c: Fixed a bunch of prototypes to avoid char/int complaint from picky compilers. Add comment to mips_expect. Replace all instances of sr_get_debug with remote_debug. * (mips_readchar): Don't jam init string to monitor. mips_initialize() handles that. * (mips_receive_header): Print better message when we get too much garbage. * (mips_request): Allow caller to pass in buff to allow them to analyze the returned message. * (mips_initialize): Re-do initialization to try sending a BREAK, a ^C, and then a download escape sequence. Cleanup protocol startup. Eliminate sleeps. Clear breakpoints (if using monitor breakpoints). Re-init frame. * (mips_detach): Close down target. start-sanitize-gm * (mips_resume): Pass signal down to target. * (mips_create_inferior): Start target with TARGET_SIGNAL_PWR. end-sanitize-gm * (mips_wait): Handle return status with registers, or breakpoint stuff. * (mips_kill): Add ^C handling. * (mips_insert_breakpoint mips_remove_breakpoint): Call new breakpoint stuff if enabled. * (calculate_mask remote_mips_set_watchpoint remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint): Hardware watchpoint/breakpoint stuff. * (common_breakpoint): Common code for new monitor breakpoint commands. * (mips_load): Don't use `prompt'. It's a global variable. * top.c (dont_repeat_command): New command for use in user-defined commands to suppress auto-repeat (by hittin return key). start-sanitize-gm * utils.c (request_quit): Call target_kill here. Good idea. Needs a better implementation. end-sanitize-gm * valops.c: Add start of auto function-call abandonment capability. start-sanitize-gm * c-exp.y: Add code (currently disabled) to handle GM dynamic structures (it conflicts with @!). * eval.c (evaluate_subexp_standard): ditto. * expprint.c (print_subexp dump_expression): ditto. * expression.h (enum exp_opcode): ditto. * parse.c (length_of_subexp): ditto. * configure, configure.in: Add mip*-*-magic* target. * magic.c magic.h: Special routines to handle GM stuff (like stepping through dispatcher). end-sanitize-gm
1995-10-27 18:48:36 +01:00
case TERNOP_SLICE: opcode_name = "TERNOP_SLICE"; break;
case TERNOP_SLICE_COUNT: opcode_name = "TERNOP_SLICE_COUNT"; break;
case OP_LONG: opcode_name = "OP_LONG"; break;
case OP_DOUBLE: opcode_name = "OP_DOUBLE"; break;
case OP_VAR_VALUE: opcode_name = "OP_VAR_VALUE"; break;
case OP_LAST: opcode_name = "OP_LAST"; break;
case OP_REGISTER: opcode_name = "OP_REGISTER"; break;
case OP_INTERNALVAR: opcode_name = "OP_INTERNALVAR"; break;
case OP_FUNCALL: opcode_name = "OP_FUNCALL"; break;
case OP_STRING: opcode_name = "OP_STRING"; break;
* c-exp.y (exp:STRING): Convert C strings into array-of-char constants with an explicit null byte terminator. OP_STRING is now used for real string types. * c-lang.c (builtin_type_*): Move declarations to lang.c since they are used by all languages. * c-lang.c (_initialize_c_language): Move initializations of builtin_type_* to lang.c. * c-typeprint.c (c_type_print_varspec_prefix, c_type_print_varspec_suffix): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * c-valprint.c (c_val_print): Change the way character arrays are printed as strings to be consistent with the way strings are printed when pointer-to-char types are dereferenced. Remove test of print_max before calling val_print_string, which now does it's own test. * eval.c (evaluate_subexp): Add case for OP_ARRAY. * expprint.c (print_subexp, dump_expression): Add case for OP_ARRAY. * expression.h (enum exp_opcode): Add OP_ARRAY and document. * gdbtypes.c (builtin_type_*): Add declarations moved from c-lang.c. * gdbtypes.c (create_string_type): New function to create real string types. * gdbtypes.c (recursive_dump_type): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * gdbtypes.c (_initialize_gdbtypes): Add initializations of builtin_type_* types moved from c-lang.c. * gdbtypes.h (enum type_code): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * gdbtypes.h (builtin_type_string): Add extern declaration. * gdbtypes.h (create_string_type): Add prototype. * m2-lang.c (m2_create_fundamental_type): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * m88k-tdep.c (pushed_size): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * mipsread.c (_initialize_mipsread): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * parse.c (length_of_subexp, prefixify_subexp): Add case for OP_ARRAY. * printcmd.c (print_formatted): Recognize TYPE_CODE_STRING. * typeprint.c (print_type_scalar): TYPE_CODE_PASCAL_ARRAY renamed to TYPE_CODE_STRING. * valops.c (allocate_space_in_inferior): New function and prototype, using code ripped out of value_string. * valops.c (value_string): Rewritten to use new function allocate_space_in_inferior, but temporarily disabled until some other support is in place. * valops.c (value_array): New function to create array constants. * valprint.c (val_print_string): Add comment to document use, complete rewrite to fix several small buglets. * value.h (value_array): Add prototype. * value.h (val_print_string): Change prototype to match rewrite. **** start-sanitize-chill **** * ch-valprint.c (chill_val_print): Add case for TYPE_CODE_STRING. * ch-exp.y (match_character_literal): Disable recognition of control sequence form of character literals and document why. **** end-sanitize-chill ****
1993-01-16 06:15:58 +01:00
case OP_BITSTRING: opcode_name = "OP_BITSTRING"; break;
case OP_ARRAY: opcode_name = "OP_ARRAY"; break;
case UNOP_CAST: opcode_name = "UNOP_CAST"; break;
case UNOP_MEMVAL: opcode_name = "UNOP_MEMVAL"; break;
case UNOP_NEG: opcode_name = "UNOP_NEG"; break;
case UNOP_LOGICAL_NOT: opcode_name = "UNOP_LOGICAL_NOT"; break;
case UNOP_COMPLEMENT: opcode_name = "UNOP_COMPLEMENT"; break;
case UNOP_IND: opcode_name = "UNOP_IND"; break;
case UNOP_ADDR: opcode_name = "UNOP_ADDR"; break;
case UNOP_PREINCREMENT: opcode_name = "UNOP_PREINCREMENT"; break;
case UNOP_POSTINCREMENT: opcode_name = "UNOP_POSTINCREMENT"; break;
case UNOP_PREDECREMENT: opcode_name = "UNOP_PREDECREMENT"; break;
case UNOP_POSTDECREMENT: opcode_name = "UNOP_POSTDECREMENT"; break;
case UNOP_SIZEOF: opcode_name = "UNOP_SIZEOF"; break;
* breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET around calls to create_longjmp_breakpoint. Why install the breakpoints if we can't find the longjmp target? * infrun.c (wait_for_inferior): Cleanup comments near call test. * remote-mips.c: Fixed a bunch of prototypes to avoid char/int complaint from picky compilers. Add comment to mips_expect. Replace all instances of sr_get_debug with remote_debug. * (mips_readchar): Don't jam init string to monitor. mips_initialize() handles that. * (mips_receive_header): Print better message when we get too much garbage. * (mips_request): Allow caller to pass in buff to allow them to analyze the returned message. * (mips_initialize): Re-do initialization to try sending a BREAK, a ^C, and then a download escape sequence. Cleanup protocol startup. Eliminate sleeps. Clear breakpoints (if using monitor breakpoints). Re-init frame. * (mips_detach): Close down target. start-sanitize-gm * (mips_resume): Pass signal down to target. * (mips_create_inferior): Start target with TARGET_SIGNAL_PWR. end-sanitize-gm * (mips_wait): Handle return status with registers, or breakpoint stuff. * (mips_kill): Add ^C handling. * (mips_insert_breakpoint mips_remove_breakpoint): Call new breakpoint stuff if enabled. * (calculate_mask remote_mips_set_watchpoint remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint): Hardware watchpoint/breakpoint stuff. * (common_breakpoint): Common code for new monitor breakpoint commands. * (mips_load): Don't use `prompt'. It's a global variable. * top.c (dont_repeat_command): New command for use in user-defined commands to suppress auto-repeat (by hittin return key). start-sanitize-gm * utils.c (request_quit): Call target_kill here. Good idea. Needs a better implementation. end-sanitize-gm * valops.c: Add start of auto function-call abandonment capability. start-sanitize-gm * c-exp.y: Add code (currently disabled) to handle GM dynamic structures (it conflicts with @!). * eval.c (evaluate_subexp_standard): ditto. * expprint.c (print_subexp dump_expression): ditto. * expression.h (enum exp_opcode): ditto. * parse.c (length_of_subexp): ditto. * configure, configure.in: Add mip*-*-magic* target. * magic.c magic.h: Special routines to handle GM stuff (like stepping through dispatcher). end-sanitize-gm
1995-10-27 18:48:36 +01:00
case UNOP_LOWER: opcode_name = "UNOP_LOWER"; break;
case UNOP_UPPER: opcode_name = "UNOP_UPPER"; break;
case UNOP_LENGTH: opcode_name = "UNOP_LENGTH"; break;
case UNOP_PLUS: opcode_name = "UNOP_PLUS"; break;
case UNOP_CAP: opcode_name = "UNOP_CAP"; break;
case UNOP_CHR: opcode_name = "UNOP_CHR"; break;
case UNOP_ORD: opcode_name = "UNOP_ORD"; break;
case UNOP_ABS: opcode_name = "UNOP_ABS"; break;
case UNOP_FLOAT: opcode_name = "UNOP_FLOAT"; break;
case UNOP_HIGH: opcode_name = "UNOP_HIGH"; break;
case UNOP_MAX: opcode_name = "UNOP_MAX"; break;
case UNOP_MIN: opcode_name = "UNOP_MIN"; break;
case UNOP_ODD: opcode_name = "UNOP_ODD"; break;
case UNOP_TRUNC: opcode_name = "UNOP_TRUNC"; break;
case OP_BOOL: opcode_name = "OP_BOOL"; break;
case OP_M2_STRING: opcode_name = "OP_M2_STRING"; break;
case STRUCTOP_STRUCT: opcode_name = "STRUCTOP_STRUCT"; break;
case STRUCTOP_PTR: opcode_name = "STRUCTOP_PTR"; break;
* breakpoint.c (breakpoint_re_set): #ifdef GET_LONGJMP_TARGET around calls to create_longjmp_breakpoint. Why install the breakpoints if we can't find the longjmp target? * infrun.c (wait_for_inferior): Cleanup comments near call test. * remote-mips.c: Fixed a bunch of prototypes to avoid char/int complaint from picky compilers. Add comment to mips_expect. Replace all instances of sr_get_debug with remote_debug. * (mips_readchar): Don't jam init string to monitor. mips_initialize() handles that. * (mips_receive_header): Print better message when we get too much garbage. * (mips_request): Allow caller to pass in buff to allow them to analyze the returned message. * (mips_initialize): Re-do initialization to try sending a BREAK, a ^C, and then a download escape sequence. Cleanup protocol startup. Eliminate sleeps. Clear breakpoints (if using monitor breakpoints). Re-init frame. * (mips_detach): Close down target. start-sanitize-gm * (mips_resume): Pass signal down to target. * (mips_create_inferior): Start target with TARGET_SIGNAL_PWR. end-sanitize-gm * (mips_wait): Handle return status with registers, or breakpoint stuff. * (mips_kill): Add ^C handling. * (mips_insert_breakpoint mips_remove_breakpoint): Call new breakpoint stuff if enabled. * (calculate_mask remote_mips_set_watchpoint remote_mips_remove_watchpoint remote_mips_stopped_by_watchpoint): Hardware watchpoint/breakpoint stuff. * (common_breakpoint): Common code for new monitor breakpoint commands. * (mips_load): Don't use `prompt'. It's a global variable. * top.c (dont_repeat_command): New command for use in user-defined commands to suppress auto-repeat (by hittin return key). start-sanitize-gm * utils.c (request_quit): Call target_kill here. Good idea. Needs a better implementation. end-sanitize-gm * valops.c: Add start of auto function-call abandonment capability. start-sanitize-gm * c-exp.y: Add code (currently disabled) to handle GM dynamic structures (it conflicts with @!). * eval.c (evaluate_subexp_standard): ditto. * expprint.c (print_subexp dump_expression): ditto. * expression.h (enum exp_opcode): ditto. * parse.c (length_of_subexp): ditto. * configure, configure.in: Add mip*-*-magic* target. * magic.c magic.h: Special routines to handle GM stuff (like stepping through dispatcher). end-sanitize-gm
1995-10-27 18:48:36 +01:00
/* start-sanitize-gm */
#ifdef GENERAL_MAGIC_HACKS
+ case STRUCTOP_FIELD: opcode_name = "STRUCTOP_FIELD"; break;
#endif /* GENERAL_MAGIC_HACKS */
/* end-sanitize-gm */
case OP_THIS: opcode_name = "OP_THIS"; break;
case OP_SCOPE: opcode_name = "OP_SCOPE"; break;
case OP_TYPE: opcode_name = "OP_TYPE"; break;
case OP_LABELED: opcode_name = "OP_LABELED"; break;
}
fprintf_filtered (stream, "%20s ", opcode_name);
fprintf_filtered (stream,
#if defined (PRINTF_HAS_LONG_LONG)
"%ll16x ",
#else
"%l16x ",
#endif
exp -> elts[elt].longconst);
for (eltscan = (char *) &exp->elts[elt],
eltsize = sizeof (union exp_element) ;
eltsize-- > 0;
eltscan++)
{
fprintf_filtered (stream, "%c",
isprint (*eltscan) ? (*eltscan & 0xFF) : '.');
}
fprintf_filtered (stream, "\n");
}
}
#endif /* DEBUG_EXPRESSIONS */