binutils-gdb/gdb/rdi-share/serpardr.c

731 lines
17 KiB
C
Raw Normal View History

/*
* Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
*
* This software may be freely used, copied, modified, and distributed
* provided that the above copyright notice is preserved in all copies of the
* software.
*/
/* -*-C-*-
*
* $Revision$
* $Date$
*
*
* serpardv.c - Serial/Parallel Driver for Angel.
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "crc.h"
#include "devices.h"
#include "buffers.h"
#include "rxtx.h"
#include "hostchan.h"
#include "params.h"
#include "logging.h"
#include "hsys.h"
#ifdef COMPILING_ON_WINDOWS
# undef ERROR
# undef IGNORE
# include <windows.h>
# include "angeldll.h"
# include "comb_api.h"
#else
# ifdef __hpux
# define _TERMIOS_INCLUDED
# include <sys/termio.h>
# undef _TERMIOS_INCLUDED
# else
# include <termios.h>
# endif
# include "unixcomm.h"
#endif
#ifndef UNUSED
# define UNUSED(x) (x = x) /* Silence compiler warnings */
#endif
#define MAXREADSIZE 512
#define MAXWRITESIZE 512
#define SERPAR_FC_SET ((1 << serial_XON) | (1 << serial_XOFF))
#define SERPAR_CTL_SET ((1 << serial_STX) | (1 << serial_ETX) | \
(1 << serial_ESC))
#define SERPAR_ESC_SET (SERPAR_FC_SET | SERPAR_CTL_SET)
static const struct re_config config = {
serial_STX, serial_ETX, serial_ESC, /* self-explanatory? */
SERPAR_FC_SET, /* set of flow-control characters */
SERPAR_ESC_SET, /* set of characters to be escaped */
NULL, /* serial_flow_control */
NULL, /* what to do with FC chars */
angel_DD_RxEng_BufferAlloc, NULL /* how to get a buffer */
};
static struct re_state rxstate;
/*
* structure used for manipulating transmit data
*/
typedef struct TxState
{
struct te_state state;
unsigned int index;
unsigned char writebuf[MAXWRITESIZE];
} TxState;
/*
* The set of parameter options supported by the device
*/
static unsigned int baud_options[] =
{
#ifdef __hpux
115200, 57600,
#endif
38400, 19200, 9600
};
static ParameterList param_list[] =
{
{
AP_BAUD_RATE,
sizeof(baud_options) / sizeof(unsigned int),
baud_options
}
};
static const ParameterOptions serpar_options =
{
sizeof(param_list) / sizeof(ParameterList),
param_list
};
/*
* The default parameter config for the device
*/
static Parameter param_default[] =
{
{ AP_BAUD_RATE, 9600 }
};
static const ParameterConfig serpar_defaults =
{
sizeof(param_default)/sizeof(Parameter),
param_default
};
/*
* The user-modified options for the device
*/
static unsigned int user_baud_options[sizeof(baud_options) /
sizeof(unsigned int)];
static ParameterList param_user_list[] =
{
{
AP_BAUD_RATE,
sizeof(user_baud_options) / sizeof(unsigned),
user_baud_options
}
};
static ParameterOptions user_options =
{
sizeof(param_user_list) / sizeof(ParameterList),
param_user_list
};
static bool user_options_set;
/* forward declarations */
static int serpar_reset(void);
static int serpar_set_params(const ParameterConfig *config);
static int SerparMatch(const char *name, const char *arg);
static void process_baud_rate(unsigned int target_baud_rate)
{
const ParameterList *full_list;
ParameterList *user_list;
/* create subset of full options */
full_list = Angel_FindParamList(&serpar_options, AP_BAUD_RATE);
user_list = Angel_FindParamList(&user_options, AP_BAUD_RATE);
if (full_list != NULL && user_list != NULL)
{
unsigned int i, j;
unsigned int def_baud = 0;
/* find lower or equal to */
for (i = 0; i < full_list->num_options; ++i)
if (target_baud_rate >= full_list->option[i])
{
/* copy remaining */
for (j = 0; j < (full_list->num_options - i); ++j)
user_list->option[j] = full_list->option[i+j];
user_list->num_options = j;
/* check this is not the default */
Angel_FindParam(AP_BAUD_RATE, &serpar_defaults, &def_baud);
if ((j == 1) && (user_list->option[0] == def_baud))
{
#ifdef DEBUG
printf("user selected default\n");
#endif
}
else
{
user_options_set = TRUE;
#ifdef DEBUG
printf("user options are: ");
for (j = 0; j < user_list->num_options; ++j)
printf("%u ", user_list->option[j]);
printf("\n");
#endif
}
break; /* out of i loop */
}
#ifdef DEBUG
if (i >= full_list->num_options)
printf("couldn't match baud rate %u\n", target_baud_rate);
#endif
}
#ifdef DEBUG
else
printf("failed to find lists\n");
#endif
}
static int SerparOpen(const char *name, const char *arg)
{
char *sername = NULL;
char *parname = NULL;
#ifdef DEBUG
printf("SerparOpen: name %s arg %s\n", name, arg ? arg : "<NULL>");
#endif
#ifdef COMPILING_ON_WINDOWS
if (IsOpenSerial() || IsOpenParallel()) return -1;
#else
if (Unix_IsSerialInUse() || Unix_IsParallelInUse()) return -1;
#endif
#ifdef COMPILING_ON_WINDOWS
if (SerparMatch(name, arg) == -1)
return -1;
#else
Unix_IsValidParallelDevice(name,&sername,&parname);
# ifdef DEBUG
printf("translated %s to serial %s and parallel %s\n",
name==0 ? "NULL" : name,
sername==0 ? "NULL" : sername,
parname==0 ? "NULL" : parname);
# endif
if (sername==NULL || parname==NULL) return -1;
#endif
user_options_set = FALSE;
/* interpret and store the arguments */
if (arg != NULL)
{
unsigned int target_baud_rate;
target_baud_rate = (unsigned int)strtoul(arg, NULL, 10);
if (target_baud_rate > 0)
{
#ifdef DEBUG
printf("user selected baud rate %u\n", target_baud_rate);
#endif
process_baud_rate(target_baud_rate);
}
#ifdef DEBUG
else
printf("could not understand baud rate %s\n", arg);
#endif
}
#ifdef COMPILING_ON_WINDOWS
{
/*
* The serial port number is in name[0] followed by
* the parallel port number in name[1]
*/
int sport = name[0] - '0';
int pport = name[1] - '0';
if (OpenParallel(pport) != COM_OK)
return -1;
if (OpenSerial(sport, FALSE) != COM_OK)
{
CloseParallel();
return -1;
}
}
#else
Unix_OpenParallel(parname);
Unix_OpenSerial(sername);
#endif
serpar_reset();
#if defined(__unix) || defined(__CYGWIN32__)
Unix_ioctlNonBlocking();
#endif
Angel_RxEngineInit(&config, &rxstate);
return 0;
}
#ifdef COMPILING_ON_WINDOWS
static int SerparMatch(const char *name, const char *arg)
{
char sername[2];
char parname[2];
UNUSED(arg);
sername[0] = name[0];
parname[0] = name[1];
sername[1] = parname[1] = 0;
if (IsValidDevice(sername) == COM_DEVICENOTVALID ||
IsValidDevice(parname) == COM_DEVICENOTVALID)
return -1;
else
return 0;
}
#else
static int SerparMatch(const char *portstring, const char *arg)
{
char *sername=NULL, *parname=NULL;
UNUSED(arg);
Unix_IsValidParallelDevice(portstring,&sername,&parname);
/* Match failed if either sername or parname are still NULL */
if (sername==NULL || parname==NULL) return -1;
return 0;
}
#endif
static void SerparClose(void)
{
#ifdef COMPILING_ON_WINDOWS
CloseParallel();
CloseSerial();
#else
Unix_CloseParallel();
Unix_CloseSerial();
#endif
}
static int SerparRead(DriverCall *dc, bool block)
{
static unsigned char readbuf[MAXREADSIZE];
static int rbindex = 0;
int nread;
int read_errno;
int c = 0;
re_status restatus;
int ret_code = -1; /* assume bad packet or error */
/*
* we must not overflow buffer, and must start after
* the existing data
*/
#ifdef COMPILING_ON_WINDOWS
{
BOOL dummy = FALSE;
nread = BytesInRXBufferSerial();
if (nread > MAXREADSIZE - rbindex)
nread = MAXREADSIZE - rbindex;
read_errno = ReadSerial(readbuf+rbindex, nread, &dummy);
if (pfnProgressCallback != NULL && read_errno == COM_OK)
{
progressInfo.nRead += nread;
(*pfnProgressCallback)(&progressInfo);
}
}
#else
nread = Unix_ReadSerial(readbuf+rbindex, MAXREADSIZE-rbindex, block);
read_errno = errno;
#endif
if ((nread > 0) || (rbindex > 0))
{
#ifdef DO_TRACE
printf("[%d@%d] ", nread, rbindex);
#endif
if (nread > 0)
rbindex = rbindex + nread;
do
{
restatus = Angel_RxEngine(readbuf[c], &(dc->dc_packet), &rxstate);
#ifdef DO_TRACE
printf("<%02X ",readbuf[c]);
#endif
c++;
} while (c < rbindex &&
((restatus == RS_IN_PKT) || (restatus == RS_WAIT_PKT)));
#ifdef DO_TRACE
printf("\n");
#endif
switch(restatus)
{
case RS_GOOD_PKT:
ret_code = 1;
/* fall through to: */
case RS_BAD_PKT:
/*
* We now need to shuffle any left over data down to the
* beginning of our private buffer ready to be used
*for the next packet
*/
#ifdef DO_TRACE
printf("SerparRead() processed %d, moving down %d\n",
c, rbindex - c);
#endif
if (c != rbindex)
memmove((char *) readbuf, (char *) (readbuf + c), rbindex - c);
rbindex -= c;
break;
case RS_IN_PKT:
case RS_WAIT_PKT:
rbindex = 0; /* will have processed all we had */
ret_code = 0;
break;
default:
#ifdef DEBUG
printf("Bad re_status in SerparRead()\n");
#endif
break;
}
}
else if (nread == 0)
/* nothing to read */
ret_code = 0;
else if (read_errno == ERRNO_FOR_BLOCKED_IO) /* nread < 0 */
ret_code = 0;
#ifdef DEBUG
if ((nread < 0) && (read_errno != ERRNO_FOR_BLOCKED_IO))
perror("read() error in SerparRead()");
#endif
return ret_code;
}
/*
* Function: send_packet
* Purpose: Send a stream of bytes to Angel through the parallel port
*
* Algorithm: We need to present the data in a form that all boards can
* swallow. With the PID board, this is a problem: for reasons
* described in the driver (angel/pid/st16c552.c), data are
* sent a nybble at a time on D0-D2 and D4; D3 is wired to ACK,
* which generates an interrupt when it goes low. This routine
* fills in an array of nybbles, with ACK clear in all but the
* last one. If, for whatever reason, the write fails, then
* ACK is forced high (thereby enabling the next write a chance
* to be noticed when the falling edge of ACK generates an
* interrupt (hopefully).
*
* Params:
* Input: txstate Contains the packet to be sent
*
* Returns: Number of *complete* bytes written
*/
static int SerparWrite(DriverCall *dc)
{
te_status status;
int nwritten = 0;
static TxState txstate;
/*
* is this a new packet?
*/
if (dc->dc_context == NULL)
{
/*
* yes - initialise TxEngine
*/
Angel_TxEngineInit(&config, &dc->dc_packet, &txstate.state);
txstate.index = 0;
dc->dc_context = &txstate;
}
/*
* fill the buffer using the Tx Engine
*/
do
{
status = Angel_TxEngine(&dc->dc_packet, &txstate.state,
&txstate.writebuf[txstate.index]);
if (status != TS_IDLE) txstate.index++;
} while (status == TS_IN_PKT && txstate.index < MAXWRITESIZE);
#ifdef DO_TRACE
{
unsigned int i = 0;
while (i < txstate.index)
{
printf(">%02X ", txstate.writebuf[i]);
if (!(++i % 16))
putc('\n', stdout);
}
if (i % 16)
putc('\n', stdout);
}
#endif
/*
* the data are ready, all we need now is to send them out
* in a form that Angel can swallow.
*/
#ifdef COMPILING_ON_WINDOWS
if (WriteParallel(txstate.writebuf, txstate.index) == COM_OK)
{
nwritten = txstate.index;
if (pfnProgressCallback != NULL)
{
progressInfo.nWritten += nwritten;
(*pfnProgressCallback)(&progressInfo);
}
}
else
{
MessageBox(GetFocus(), "Write error\n", "Angel", MB_OK | MB_ICONSTOP);
return -1; /* SJ - This really needs to return a value, which is picked up in */
/* DevSW_Read as meaning stop debugger but don't kill. */
}
#else
nwritten = Unix_WriteParallel(txstate.writebuf, txstate.index);
#endif
if (nwritten < 0) nwritten = 0;
#ifdef DO_TRACE
printf("SerparWrite: wrote %d out of %d bytes\n",
nwritten, txstate.index);
#endif
/*
* has the whole packet gone?
*/
if (nwritten == (int)txstate.index &&
(status == TS_DONE_PKT || status == TS_IDLE))
/*
* yes it has
*/
return 1;
else
{
/*
* if some data are left, shuffle them
* to the start of the buffer
*/
if (nwritten != (int)txstate.index && nwritten != 0)
{
txstate.index -= nwritten;
(void)memmove((char *) txstate.writebuf,
(char *) (txstate.writebuf + nwritten),
txstate.index);
}
else if (nwritten == (int)txstate.index)
txstate.index = 0;
return 0;
}
}
static int serpar_reset(void)
{
#ifdef COMPILING_ON_WINDOWS
FlushParallel();
FlushSerial();
#else
Unix_ResetParallel();
Unix_ResetSerial();
#endif
return serpar_set_params(&serpar_defaults);
}
static int find_baud_rate(unsigned int *speed)
{
static struct
{
unsigned int baud;
int termiosValue;
} possibleBaudRates[] =
{
#if defined(__hpux)
{115200, _B115200}, {57600, _B57600},
#endif
#ifdef COMPILING_ON_WINDOWS
{38400, CBR_38400}, {19200, CBR_19200}, {9600, CBR_9600}, {0, 0}
#else
{38400, B38400}, {19200, B19200}, {9600, B9600}, {0, 0}
#endif
};
unsigned int i;
/* look for lower or matching -- will always terminate at 0 end marker */
for (i = 0; possibleBaudRates[i].baud > *speed; ++i)
/* do nothing */
;
if (possibleBaudRates[i].baud > 0)
*speed = possibleBaudRates[i].baud;
return possibleBaudRates[i].termiosValue;
}
static int serpar_set_params(const ParameterConfig *config)
{
unsigned int speed;
int termios_value;
#ifdef DEBUG
printf("serpar_set_params\n");
#endif
if (!Angel_FindParam(AP_BAUD_RATE, config, &speed))
{
#ifdef DEBUG
printf("speed not found in config\n");
#endif
return DE_OKAY;
}
termios_value = find_baud_rate(&speed);
if (termios_value == 0)
{
#ifdef DEBUG
printf("speed not valid: %u\n", speed);
#endif
return DE_OKAY;
}
#ifdef DEBUG
printf("setting speed to %u\n", speed);
#endif
#ifdef COMPILING_ON_WINDOWS
SetBaudRate((WORD)termios_value);
#else
Unix_SetSerialBaudRate(termios_value);
#endif
return DE_OKAY;
}
static int serpar_get_user_params(ParameterOptions **p_options)
{
#ifdef DEBUG
printf("serpar_get_user_params\n");
#endif
if (user_options_set)
{
*p_options = &user_options;
}
else
{
*p_options = NULL;
}
return DE_OKAY;
}
static int serial_get_default_params( const ParameterConfig **p_config )
{
#ifdef DEBUG
printf( "serial_get_default_params\n" );
#endif
*p_config = &serpar_defaults;
return DE_OKAY;
}
static int SerparIoctl(const int opcode, void *args)
{
int ret_code;
#ifdef DEBUG
printf("SerparIoctl: op %d arg %p\n", opcode, args ? args : "<NULL>");
#endif
switch (opcode)
{
case DC_RESET:
ret_code = serpar_reset();
break;
case DC_SET_PARAMS:
ret_code = serpar_set_params((const ParameterConfig *)args);
break;
case DC_GET_USER_PARAMS:
ret_code = serpar_get_user_params((ParameterOptions **)args);
break;
case DC_GET_DEFAULT_PARAMS:
ret_code =
serial_get_default_params((const ParameterConfig **)args);
break;
default:
ret_code = DE_BAD_OP;
break;
}
return ret_code;
}
DeviceDescr angel_SerparDevice =
{
"SERPAR",
SerparOpen,
SerparMatch,
SerparClose,
SerparRead,
SerparWrite,
SerparIoctl
};
/* EOF serpardr.c */