binutils-gdb/gdb/tm-mips.h

364 lines
13 KiB
C
Raw Normal View History

1991-03-28 17:28:29 +01:00
/* Definitions to make GDB run on a mips box under 4.3bsd.
Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
Contributed by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin
and by Alessandro Forin(af@cs.cmu.edu) at CMU
This file is part of GDB.
GDB is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 1, or (at your option)
any later version.
GDB is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GDB; see the file COPYING. If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
#if !defined (TARGET_BYTE_ORDER)
#define TARGET_BYTE_ORDER LITTLE_ENDIAN
#endif
/* Floating point is IEEE compliant */
#define IEEE_FLOAT
/* Define this if the C compiler puts an underscore at the front
of external names before giving them to the linker. */
/*#define NAMES_HAVE_UNDERSCORE*/
/* Debugger information will be in mips' format */
#define READ_MIPS_FORMAT
/* File format is coff, but with additions */
#define COFF_FORMAT
/* Offset from address of function to start of its code.
Zero on most machines. */
#define FUNCTION_START_OFFSET 0
/* Advance PC across any function entry prologue instructions
to reach some "real" code. */
#define SKIP_PROLOGUE(pc) pc = mips_skip_prologue(pc)
/* Immediately after a function call, return the saved pc.
Can't always go through the frames for this because on some machines
the new frame is not set up until the new function executes
some instructions. */
#define SAVED_PC_AFTER_CALL(frame) read_register(RA_REGNUM)
/* Are we currently handling a signal */
#define IN_SIGTRAMP(pc, name) in_sigtramp(pc, name)
/* Address of end of stack space. */
#define STACK_END_ADDR (0x7ffff000)
/* Stack grows downward. */
#define INNER_THAN <
#define BIG_ENDIAN 4321
#if TARGET_BYTE_ORDER == BIG_ENDIAN
#define BREAKPOINT {0, 0x5, 0, 0xd}
#else
#define BREAKPOINT {0xd, 0, 0x5, 0}
#endif
/* Amount PC must be decremented by after a breakpoint.
This is often the number of bytes in BREAKPOINT
but not always. */
#define DECR_PC_AFTER_BREAK 0
/* Nonzero if instruction at PC is a return instruction. "j ra" on mips. */
#define ABOUT_TO_RETURN(pc) (read_memory_integer (pc, 4) == 0x3e00008)
/* Return 1 if P points to an invalid floating point value. */
#define INVALID_FLOAT(p,l) isa_NAN(p,l)
/* Say how long (all) registers are. */
#define REGISTER_TYPE long
/* Number of machine registers */
#define NUM_REGS 73
/* Initializer for an array of names of registers.
There should be NUM_REGS strings in this initializer. */
#define REGISTER_NAMES \
{ "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", \
"t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", \
"s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", \
"t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra", \
"sr", "lo", "hi", "bad", "cause","pc", \
"f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \
"f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \
"f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",\
"f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",\
"fsr", "fir", "fp" \
}
/* Register numbers of various important registers.
Note that some of these values are "real" register numbers,
and correspond to the general registers of the machine,
and some are "phony" register numbers which are too large
to be actual register numbers as far as the user is concerned
but do serve to get the desired values when passed to read_register. */
#define SP_REGNUM 29 /* Contains address of top of stack */
#define PC_REGNUM 37 /* Contains program counter */
#define RA_REGNUM 31 /* Contains return address value */
#define PS_REGNUM 32 /* Contains processor status */
#define HI_REGNUM 34 /* Multiple/divide temp */
#define LO_REGNUM 33 /* ... */
#define FP0_REGNUM 38 /* Floating point register 0 (single float) */
#define FCRCS_REGNUM 70 /* FP control/status */
#define FCRIR_REGNUM 71 /* FP implementation/revision */
#define FP_REGNUM 72 /* Pseudo register that contains true address of executing stack frame */
/* Define DO_REGISTERS_INFO() to do machine-specific formatting
of register dumps. */
#define DO_REGISTERS_INFO(_regnum) mips_do_registers_info(_regnum)
#define REGISTER_U_ADDR(addr, blockend, regno) \
if (blockend == 0) { \
if (regno < 38) addr = (NBPG*UPAGES) + (regno - 38)*sizeof(int);\
else addr = 0; /* ..somewhere in the pcb */ \
} else if (regno < 32) addr = regno; \
else if (regno == PC_REGNUM) addr = 96; \
else if (regno == 36) addr = 97; \
else if (regno == HI_REGNUM) addr = 98; \
else if (regno == LO_REGNUM) addr = 99; \
else if (regno == FCRCS_REGNUM) addr = 100; \
else if (regno == FCRIR_REGNUM) addr = 101; \
else if (regno >= FP0_REGNUM) addr = regno - (FP0_REGNUM-32);\
else addr = 0;
/* Total amount of space needed to store our copies of the machine's
register state, the array `registers'. */
#define REGISTER_BYTES (NUM_REGS*4)
/* Index within `registers' of the first byte of the space for
register N. */
#define REGISTER_BYTE(N) ((N) * 4)
/* Number of bytes of storage in the actual machine representation
for register N. On mips, all regs are 4 bytes. */
#define REGISTER_RAW_SIZE(N) 4
/* Number of bytes of storage in the program's representation
for register N. On mips, all regs are 4 bytes. */
#define REGISTER_VIRTUAL_SIZE(N) 4
/* Largest value REGISTER_RAW_SIZE can have. */
#define MAX_REGISTER_RAW_SIZE 4
/* Largest value REGISTER_VIRTUAL_SIZE can have. */
#define MAX_REGISTER_VIRTUAL_SIZE 4
/* Nonzero if register N requires conversion
from raw format to virtual format. */
#define REGISTER_CONVERTIBLE(N) 0
/* Convert data from raw format for register REGNUM
to virtual format for register REGNUM. */
#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) \
bcopy ((FROM), (TO), 4);
/* Convert data from virtual format for register REGNUM
to raw format for register REGNUM. */
#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) \
bcopy ((FROM), (TO), 4);
/* Return the GDB type object for the "standard" data type
of data in register N. */
#define REGISTER_VIRTUAL_TYPE(N) builtin_type_int
/* Store the address of the place in which to copy the structure the
subroutine will return. This is called from call_function. */
#define STORE_STRUCT_RETURN(addr, sp) \
{ sp = push_word(sp, addr);}
/* Extract from an array REGBUF containing the (raw) register state
a function return value of type TYPE, and copy that, in virtual format,
into VALBUF. XXX floats */
#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
bcopy (REGBUF+REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 2), VALBUF, TYPE_LENGTH (TYPE))
/* Write into appropriate registers a function return value
of type TYPE, given in virtual format. */
#define STORE_RETURN_VALUE(TYPE,VALBUF) \
write_register_bytes (REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 2), VALBUF, TYPE_LENGTH (TYPE))
/* Extract from an array REGBUF containing the (raw) register state
the address in which a function should return its structure value,
as a CORE_ADDR (or an expression that can be used as one). */
#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF+16))
/* Structures are returned by ref in extra arg0 */
#define USE_STRUCT_CONVENTION(gcc_p, type) 1
/* Describe the pointer in each stack frame to the previous stack frame
(its caller). */
/* FRAME_CHAIN takes a frame's nominal address
and produces the frame's chain-pointer.
FRAME_CHAIN_COMBINE takes the chain pointer and the frame's nominal address
and produces the nominal address of the caller frame.
However, if FRAME_CHAIN_VALID returns zero,
it means the given frame is the outermost one and has no caller.
In that case, FRAME_CHAIN_COMBINE is not used. */
#define FRAME_CHAIN(thisframe) (FRAME_ADDR)mips_frame_chain(thisframe)
#define FRAME_CHAIN_VALID(chain, thisframe) \
(chain != 0 && (outside_startup_file (FRAME_SAVED_PC (thisframe))))
#define FRAME_CHAIN_COMBINE(chain, thisframe) (chain)
/* Define other aspects of the stack frame. */
/* A macro that tells us whether the function invocation represented
by FI does not have a frame on the stack associated with it. If it
does not, FRAMELESS is set to 1, else 0. */
/* We handle this differently for mips, and maybe we should not */
#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) {(FRAMELESS) = 0;}
/* Saved Pc. */
#define FRAME_SAVED_PC(FRAME) (mips_frame_saved_pc(FRAME))
#define FRAME_ARGS_ADDRESS(fi) (fi)->frame
#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame
/* Return number of args passed to a frame.
Can return -1, meaning no way to tell. */
#define FRAME_NUM_ARGS(num, fi) (num = mips_frame_num_args(fi))
/* Return number of bytes at start of arglist that are not really args. */
#define FRAME_ARGS_SKIP 0
/* Put here the code to store, into a struct frame_saved_regs,
the addresses of the saved registers of frame described by FRAME_INFO.
This includes special registers such as pc and fp saved in special
ways in the stack frame. sp is even more special:
the address we return for it IS the sp for the next frame. */
#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) ( \
(frame_saved_regs) = *(frame_info)->saved_regs, \
(frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame)
/* Things needed for making the inferior call functions. */
/* Stack has strict alignment. However, use PUSH_ARGUMENTS
to take care of it. */
/*#define STACK_ALIGN(addr) (((addr)+3)&~3)*/
#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \
sp = mips_push_arguments(nargs, args, sp, struct_return, struct_addr)
/* Push an empty stack frame, to record the current PC, etc. */
#define PUSH_DUMMY_FRAME mips_push_dummy_frame()
/* Discard from the stack the innermost frame, restoring all registers. */
#define POP_FRAME mips_pop_frame()
#define MK_OP(op,rs,rt,offset) (((op)<<26)|((rs)<<21)|((rt)<<16)|(offset))
#define CALL_DUMMY_SIZE (16*4)
#define Dest_Reg 2
#define CALL_DUMMY {\
MK_OP(0,RA_REGNUM,0,8), /* jr $ra # Fake ABOUT_TO_RETURN ...*/\
0, /* nop # ... to stop raw backtrace*/\
0x27bd0000, /* addu sp,?0 # Pseudo prologue */\
/* Start here: */\
MK_OP(061,SP_REGNUM,12,0), /* lwc1 $f12,0(sp) # Reload first 4 args*/\
MK_OP(061,SP_REGNUM,13,4), /* lwc1 $f13,4(sp) */\
MK_OP(061,SP_REGNUM,14,8), /* lwc1 $f14,8(sp) */\
MK_OP(061,SP_REGNUM,15,12), /* lwc1 $f15,12(sp) */\
MK_OP(043,SP_REGNUM,4,0), /* lw $r4,0(sp) # Re-load FP regs*/\
MK_OP(043,SP_REGNUM,5,4), /* lw $r5,4(sp) */\
MK_OP(043,SP_REGNUM,6,8), /* lw $r6,8(sp) */\
MK_OP(043,SP_REGNUM,7,12), /* lw $r7,12(sp) */\
(017<<26)| (Dest_Reg << 16), /* lui $r31,<target upper 16 bits>*/\
MK_OP(13,Dest_Reg,Dest_Reg,0), /* ori $r31,$r31,<lower 16 bits>*/ \
(Dest_Reg<<21) | (31<<11) | 9, /* jalr $r31 */\
MK_OP(043,SP_REGNUM,7,12), /* lw $r7,12(sp) */\
0x5000d, /* bpt */\
}
#define CALL_DUMMY_START_OFFSET 12
/* Insert the specified number of args and function address
into a call sequence of the above form stored at DUMMYNAME. */
#define FIX_CALL_DUMMY(dummyname, start_sp, fun, nargs, args, rettype, gcc_p)\
(((int*)dummyname)[11] |= (((unsigned long)(fun)) >> 16), \
((int*)dummyname)[12] |= (unsigned short)(fun))
/* Specific information about a procedure.
This overlays the MIPS's PDR records,
mipsread.c (ab)uses this to save memory */
typedef struct mips_extra_func_info {
unsigned long adr; /* memory address of start of procedure */
long isym; /* pointer to procedure symbol */
long pad2; /* iline: start of line number entries*/
long regmask; /* save register mask */
long regoffset; /* save register offset */
long numargs; /* number of args to procedure (was iopt) */
long fregmask; /* save floating point register mask */
long fregoffset; /* save floating point register offset */
long framesize; /* frameoffset: frame size */
short framereg; /* frame pointer register */
short pcreg; /* offset or reg of return pc */
long lnLow; /* lowest line in the procedure */
long lnHigh; /* highest line in the procedure */
long pad3; /* cbLineOffset: byte offset for this procedure from the fd base */
} *mips_extra_func_info_t;
#define EXTRA_FRAME_INFO \
char *proc_desc; /* actually, a mips_extra_func_info_t */\
int num_args;\
struct frame_saved_regs *saved_regs;
#define INIT_EXTRA_FRAME_INFO(fci) init_extra_frame_info(fci)