binutils-gdb/gdb/inline-frame.c

438 lines
13 KiB
C
Raw Normal View History

gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
/* Inline frame unwinder for GDB.
Copyright (C) 2008-2019 Free Software Foundation, Inc.
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
Don't elide all inlined frames This patch essentially causes GDB to treat inlined frames like "normal" frames from the user's perspective. This means, for example, that when a user sets a breakpoint in an inlined function, GDB will now actually stop "in" that function. Using the test case from breakpoints/17534, 3 static inline void NVIC_EnableIRQ(int IRQn) 4 { 5 volatile int y; 6 y = IRQn; 7 } 8 9 __attribute__( ( always_inline ) ) static inline void __WFI(void) 10 { 11 __asm volatile ("nop"); 12 } 13 14 int main(void) { 15 16 x= 42; 17 18 if (x) 19 NVIC_EnableIRQ(16); 20 else 21 NVIC_EnableIRQ(18); (gdb) b NVIC_EnableIRQ Breakpoint 1 at 0x4003e4: NVIC_EnableIRQ. (2 locations) (gdb) r Starting program: 17534 Breakpoint 1, main () at 17534.c:19 19 NVIC_EnableIRQ(16); Because skip_inline_frames currently skips every inlined frame, GDB "stops" in the caller. This patch adds a new parameter to skip_inline_frames that allows us to pass in a bpstat stop chain. The breakpoint locations on the stop chain can be used to determine if we've stopped inside an inline function (due to a user breakpoint). If we have, we do not elide the frame. With this patch, GDB now reports that the inferior has stopped inside the inlined function: (gdb) r Starting program: 17534 Breakpoint 1, NVIC_EnableIRQ (IRQn=16) at 17534.c:6 6 y = IRQn; Many thanks to Jan and Pedro for guidance on this. gdb/ChangeLog: * breakpoint.c (build_bpstat_chain): New function, moved from bpstat_stop_status. (bpstat_stop_status): Add optional parameter, `stop_chain'. If no stop chain is passed, call build_bpstat_chain to build it. * breakpoint.h (build_bpstat_chain): Declare. (bpstat_stop_status): Move documentation here from breakpoint.c. * infrun.c (handle_signal_stop): Before eliding inlined frames, build the stop chain and pass it to skip_inline_frames. Pass this stop chain to bpstat_stop_status. * inline-frame.c: Include breakpoint.h. (stopped_by_user_bp_inline_frame): New function. (skip_inline_frames): Add parameter `stop_chain'. Move documention to inline-frame.h. If non-NULL, use stopped_by_user_bp_inline_frame to determine whether the frame should be elided. * inline-frame.h (skip_inline_frames): Add parameter `stop_chain'. Add moved documentation and update for new parameter. gdb/testsuite/ChangeLog: * gdb.ada/bp_inlined_func.exp: Update inlined frame locations in expected breakpoint stop locations. * gdb.dwarf2/implptr.exp (implptr_test_baz): Use up/down to move to proper scope to test variable values. * gdb.opt/inline-break.c (inline_func1, not_inline_func1) (inline_func2, not_inline_func2, inline_func3, not_inline_func3): New functions. (main): Call not_inline_func3. * gdb.opt/inline-break.exp: Start inferior and set breakpoints at inline_func1, inline_func2, and inline_func3. Test that when each breakpoint is hit, GDB properly reports both the stop location and the backtrace. Repeat tests for temporary breakpoints.
2018-05-17 21:15:11 +02:00
#include "breakpoint.h"
#include "inline-frame.h"
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
#include "addrmap.h"
#include "block.h"
#include "frame-unwind.h"
#include "inferior.h"
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
#include "gdbthread.h"
#include "regcache.h"
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
#include "symtab.h"
Normalize includes to use common/ This changes all includes to use the form "common/filename.h" rather than just "filename.h". This was written by a script. gdb/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * xtensa-linux-nat.c: Fix common/ includes. * xml-support.h: Fix common/ includes. * xml-support.c: Fix common/ includes. * x86-linux-nat.c: Fix common/ includes. * windows-nat.c: Fix common/ includes. * varobj.h: Fix common/ includes. * varobj.c: Fix common/ includes. * value.c: Fix common/ includes. * valops.c: Fix common/ includes. * utils.c: Fix common/ includes. * unittests/xml-utils-selftests.c: Fix common/ includes. * unittests/utils-selftests.c: Fix common/ includes. * unittests/unpack-selftests.c: Fix common/ includes. * unittests/tracepoint-selftests.c: Fix common/ includes. * unittests/style-selftests.c: Fix common/ includes. * unittests/string_view-selftests.c: Fix common/ includes. * unittests/scoped_restore-selftests.c: Fix common/ includes. * unittests/scoped_mmap-selftests.c: Fix common/ includes. * unittests/scoped_fd-selftests.c: Fix common/ includes. * unittests/rsp-low-selftests.c: Fix common/ includes. * unittests/parse-connection-spec-selftests.c: Fix common/ includes. * unittests/optional-selftests.c: Fix common/ includes. * unittests/offset-type-selftests.c: Fix common/ includes. * unittests/observable-selftests.c: Fix common/ includes. * unittests/mkdir-recursive-selftests.c: Fix common/ includes. * unittests/memrange-selftests.c: Fix common/ includes. * unittests/memory-map-selftests.c: Fix common/ includes. * unittests/lookup_name_info-selftests.c: Fix common/ includes. * unittests/function-view-selftests.c: Fix common/ includes. * unittests/environ-selftests.c: Fix common/ includes. * unittests/copy_bitwise-selftests.c: Fix common/ includes. * unittests/common-utils-selftests.c: Fix common/ includes. * unittests/cli-utils-selftests.c: Fix common/ includes. * unittests/array-view-selftests.c: Fix common/ includes. * ui-file.c: Fix common/ includes. * tui/tui-io.c: Fix common/ includes. * tracepoint.h: Fix common/ includes. * tracepoint.c: Fix common/ includes. * tracefile-tfile.c: Fix common/ includes. * top.h: Fix common/ includes. * top.c: Fix common/ includes. * thread.c: Fix common/ includes. * target/waitstatus.h: Fix common/ includes. * target/waitstatus.c: Fix common/ includes. * target.h: Fix common/ includes. * target.c: Fix common/ includes. * target-memory.c: Fix common/ includes. * target-descriptions.c: Fix common/ includes. * symtab.h: Fix common/ includes. * symfile.c: Fix common/ includes. * stap-probe.c: Fix common/ includes. * spu-linux-nat.c: Fix common/ includes. * sparc-nat.c: Fix common/ includes. * source.c: Fix common/ includes. * solib.c: Fix common/ includes. * solib-target.c: Fix common/ includes. * ser-unix.c: Fix common/ includes. * ser-tcp.c: Fix common/ includes. * ser-pipe.c: Fix common/ includes. * ser-base.c: Fix common/ includes. * selftest-arch.c: Fix common/ includes. * s12z-tdep.c: Fix common/ includes. * rust-exp.y: Fix common/ includes. * rs6000-aix-tdep.c: Fix common/ includes. * riscv-tdep.c: Fix common/ includes. * remote.c: Fix common/ includes. * remote-notif.h: Fix common/ includes. * remote-fileio.h: Fix common/ includes. * remote-fileio.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * record-btrace.c: Fix common/ includes. * python/python.c: Fix common/ includes. * python/py-type.c: Fix common/ includes. * python/py-inferior.c: Fix common/ includes. * progspace.h: Fix common/ includes. * producer.c: Fix common/ includes. * procfs.c: Fix common/ includes. * proc-api.c: Fix common/ includes. * printcmd.c: Fix common/ includes. * ppc-linux-nat.c: Fix common/ includes. * parser-defs.h: Fix common/ includes. * osdata.c: Fix common/ includes. * obsd-nat.c: Fix common/ includes. * nat/x86-linux.c: Fix common/ includes. * nat/x86-linux-dregs.c: Fix common/ includes. * nat/x86-dregs.h: Fix common/ includes. * nat/x86-dregs.c: Fix common/ includes. * nat/ppc-linux.c: Fix common/ includes. * nat/mips-linux-watch.h: Fix common/ includes. * nat/mips-linux-watch.c: Fix common/ includes. * nat/linux-waitpid.c: Fix common/ includes. * nat/linux-ptrace.h: Fix common/ includes. * nat/linux-ptrace.c: Fix common/ includes. * nat/linux-procfs.c: Fix common/ includes. * nat/linux-personality.c: Fix common/ includes. * nat/linux-osdata.c: Fix common/ includes. * nat/linux-namespaces.c: Fix common/ includes. * nat/linux-btrace.h: Fix common/ includes. * nat/linux-btrace.c: Fix common/ includes. * nat/fork-inferior.c: Fix common/ includes. * nat/amd64-linux-siginfo.c: Fix common/ includes. * nat/aarch64-sve-linux-ptrace.c: Fix common/ includes. * nat/aarch64-linux.c: Fix common/ includes. * nat/aarch64-linux-hw-point.h: Fix common/ includes. * nat/aarch64-linux-hw-point.c: Fix common/ includes. * namespace.h: Fix common/ includes. * mips-linux-tdep.c: Fix common/ includes. * minsyms.c: Fix common/ includes. * mi/mi-parse.h: Fix common/ includes. * mi/mi-main.c: Fix common/ includes. * mi/mi-cmd-env.c: Fix common/ includes. * memrange.h: Fix common/ includes. * memattr.c: Fix common/ includes. * maint.h: Fix common/ includes. * maint.c: Fix common/ includes. * main.c: Fix common/ includes. * machoread.c: Fix common/ includes. * location.c: Fix common/ includes. * linux-thread-db.c: Fix common/ includes. * linux-nat.c: Fix common/ includes. * linux-fork.c: Fix common/ includes. * inline-frame.c: Fix common/ includes. * infrun.c: Fix common/ includes. * inflow.c: Fix common/ includes. * inferior.h: Fix common/ includes. * inferior.c: Fix common/ includes. * infcmd.c: Fix common/ includes. * inf-ptrace.c: Fix common/ includes. * inf-child.c: Fix common/ includes. * ia64-linux-nat.c: Fix common/ includes. * i387-tdep.c: Fix common/ includes. * i386-tdep.c: Fix common/ includes. * i386-linux-tdep.c: Fix common/ includes. * i386-linux-nat.c: Fix common/ includes. * i386-go32-tdep.c: Fix common/ includes. * i386-fbsd-tdep.c: Fix common/ includes. * i386-fbsd-nat.c: Fix common/ includes. * guile/scm-type.c: Fix common/ includes. * guile/guile.c: Fix common/ includes. * go32-nat.c: Fix common/ includes. * gnu-nat.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbarch-selftests.c: Fix common/ includes. * gdb_usleep.c: Fix common/ includes. * gdb_select.h: Fix common/ includes. * gdb_bfd.c: Fix common/ includes. * gcore.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * findvar.c: Fix common/ includes. * fbsd-nat.c: Fix common/ includes. * event-top.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * dwarf2read.c: Fix common/ includes. * dwarf2loc.c: Fix common/ includes. * dwarf2-frame.c: Fix common/ includes. * dwarf-index-cache.c: Fix common/ includes. * dtrace-probe.c: Fix common/ includes. * disasm-selftests.c: Fix common/ includes. * defs.h: Fix common/ includes. * csky-tdep.c: Fix common/ includes. * cp-valprint.c: Fix common/ includes. * cp-support.h: Fix common/ includes. * cp-support.c: Fix common/ includes. * corelow.c: Fix common/ includes. * completer.h: Fix common/ includes. * completer.c: Fix common/ includes. * compile/compile.c: Fix common/ includes. * compile/compile-loc2c.c: Fix common/ includes. * compile/compile-cplus-types.c: Fix common/ includes. * compile/compile-cplus-symbols.c: Fix common/ includes. * command.h: Fix common/ includes. * cli/cli-dump.c: Fix common/ includes. * cli/cli-cmds.c: Fix common/ includes. * charset.c: Fix common/ includes. * build-id.c: Fix common/ includes. * btrace.h: Fix common/ includes. * btrace.c: Fix common/ includes. * breakpoint.h: Fix common/ includes. * breakpoint.c: Fix common/ includes. * ax.h: (enum agent_op): Fix common/ includes. * ax-general.c (struct aop_map): Fix common/ includes. * ax-gdb.c: Fix common/ includes. * auxv.c: Fix common/ includes. * auto-load.c: Fix common/ includes. * arm-tdep.c: Fix common/ includes. * arch/riscv.c: Fix common/ includes. * arch/ppc-linux-common.c: Fix common/ includes. * arch/i386.c: Fix common/ includes. * arch/arm.c: Fix common/ includes. * arch/arm-linux.c: Fix common/ includes. * arch/arm-get-next-pcs.c: Fix common/ includes. * arch/amd64.c: Fix common/ includes. * arch/aarch64.c: Fix common/ includes. * arch/aarch64-insn.c: Fix common/ includes. * arch-utils.c: Fix common/ includes. * amd64-windows-tdep.c: Fix common/ includes. * amd64-tdep.c: Fix common/ includes. * amd64-sol2-tdep.c: Fix common/ includes. * amd64-obsd-tdep.c: Fix common/ includes. * amd64-nbsd-tdep.c: Fix common/ includes. * amd64-linux-tdep.c: Fix common/ includes. * amd64-linux-nat.c: Fix common/ includes. * amd64-fbsd-tdep.c: Fix common/ includes. * amd64-fbsd-nat.c: Fix common/ includes. * amd64-dicos-tdep.c: Fix common/ includes. * amd64-darwin-tdep.c: Fix common/ includes. * agent.c: Fix common/ includes. * ada-lang.h: Fix common/ includes. * ada-lang.c: Fix common/ includes. * aarch64-tdep.c: Fix common/ includes. gdb/gdbserver/ChangeLog 2019-01-25 Tom Tromey <tom@tromey.com> * win32-low.c: Fix common/ includes. * win32-i386-low.c: Fix common/ includes. * tracepoint.c: Fix common/ includes. * thread-db.c: Fix common/ includes. * target.h: Fix common/ includes. * symbol.c: Fix common/ includes. * spu-low.c: Fix common/ includes. * server.h: Fix common/ includes. * server.c: Fix common/ includes. * remote-utils.c: Fix common/ includes. * regcache.h: Fix common/ includes. * regcache.c: Fix common/ includes. * nto-x86-low.c: Fix common/ includes. * notif.h: Fix common/ includes. * mem-break.h: Fix common/ includes. * lynx-low.c: Fix common/ includes. * lynx-i386-low.c: Fix common/ includes. * linux-x86-tdesc-selftest.c: Fix common/ includes. * linux-x86-low.c: Fix common/ includes. * linux-low.c: Fix common/ includes. * inferiors.h: Fix common/ includes. * i387-fp.c: Fix common/ includes. * hostio.c: Fix common/ includes. * hostio-errno.c: Fix common/ includes. * gdbthread.h: Fix common/ includes. * gdbreplay.c: Fix common/ includes. * fork-child.c: Fix common/ includes. * event-loop.c: Fix common/ includes. * ax.c: (enum gdb_agent_op): Fix common/ includes.
2019-01-23 18:21:39 +01:00
#include "common/vec.h"
Fix PR backtrace/15558 This PR is about an assertion failure in GDB that can be triggered by setting "backtrace limit" to a value that causes GDB to stop unwinding after an inline frame. In this case, an assertion in inline_frame_this_id will trigger: /* We need a valid frame ID, so we need to be based on a valid frame. (...). */ gdb_assert (frame_id_p (*this_id)); Looking at the function: static void inline_frame_this_id (struct frame_info *this_frame, void **this_cache, struct frame_id *this_id) { struct symbol *func; /* In order to have a stable frame ID for a given inline function, we must get the stack / special addresses from the underlying real frame's this_id method. So we must call get_prev_frame. Because we are inlined into some function, there must be previous frames, so this is safe - as long as we're careful not to create any cycles. */ *this_id = get_frame_id (get_prev_frame (this_frame)); we see we're computing the frame id for the inline frame. If this is an inline frame, which is a virtual frame constructed based on debug info, on top of a real stack frame, we should _always_ be able to find where the frame was inlined into, as that ultimately just means peeling off the virtual frames on top of the real stack frame. If there ultimately was no prev (real) stack frame, then we wouldn't have been able to construct the inline frame either, by design. That's what the assertion catches. So we have an inline frame, we should _always_ be able to compute its ID, even if that means bypassing the user backtrace limits to get at the real stack frame's info. The problem is that inline_frame_id calls get_prev_frame, and that takes user backtrace limits into account. Code that wants to bypass the limits calls get_prev_frame_1 instead. Note how get_prev_frame_1 already skips all checks for inline frames: /* If we are unwinding from an inline frame, all of the below tests were already performed when we unwound from the next non-inline frame. We must skip them, since we can not get THIS_FRAME's ID until we have unwound all the way down to the previous non-inline frame. */ if (get_frame_type (this_frame) == INLINE_FRAME) return get_prev_frame_if_no_cycle (this_frame); And note how the related frame_unwind_caller_id function also uses get_prev_frame_1: struct frame_id frame_unwind_caller_id (struct frame_info *next_frame) { struct frame_info *this_frame; /* Use get_prev_frame_1, and not get_prev_frame. The latter will truncate the frame chain, leading to this function unintentionally returning a null_frame_id (e.g., when a caller requests the frame ID of "main()"s caller. */ next_frame = skip_artificial_frames (next_frame); this_frame = get_prev_frame_1 (next_frame); if (this_frame) return get_frame_id (skip_artificial_frames (this_frame)); else return null_frame_id; } get_prev_frame_1 is currently static in frame.c. As a _1 suffix is not a good name for an extern function, I've renamed it. Tested on x86-64 Fedora 17. gdb/ 2014-04-18 Pedro alves <palves@redhat.com> Tom Tromey <tromey@redhat.com> PR backtrace/15558 * frame.c (get_prev_frame_1): Rename to ... (get_prev_frame_always): ... this, and make extern. Adjust. (skip_artificial_frames): Use get_prev_frame_always. (frame_unwind_caller_id, frame_pop, get_prev_frame) (get_frame_unwind_stop_reason): Adjust to rename. * frame.h (get_prev_frame_always): Declare. * inline-frame.c: Include frame.h. (inline_frame_this_id): Use get_prev_frame_always. gdb/testsuite/ 2014-04-18 Tom Tromey <palves@redhat.com> Pedro alves <tromey@redhat.com> PR backtrace/15558 * gdb.opt/inline-bt.exp: Test backtracing from an inline function with a backtrace limit. * gdb.python/py-frame-inline.exp: Test running to an inline function with a backtrace limit, and printing the newest frame. * gdb.python/py-frame-inline.c (main): Call f.
2014-04-18 11:15:21 +02:00
#include "frame.h"
#include <algorithm>
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
/* We need to save a few variables for every thread stopped at the
virtual call site of an inlined function. If there was always a
"struct thread_info", we could hang it off that; in the mean time,
keep our own list. */
struct inline_state
{
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
inline_state (thread_info *thread_, int skipped_frames_, CORE_ADDR saved_pc_,
symbol *skipped_symbol_)
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
: thread (thread_), skipped_frames (skipped_frames_), saved_pc (saved_pc_),
skipped_symbol (skipped_symbol_)
{}
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
/* The thread this data relates to. It should be a currently
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
stopped thread. */
thread_info *thread;
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
/* The number of inlined functions we are skipping. Each of these
functions can be stepped in to. */
int skipped_frames;
/* Only valid if SKIPPED_FRAMES is non-zero. This is the PC used
when calculating SKIPPED_FRAMES; used to check whether we have
moved to a new location by user request. If so, we invalidate
any skipped frames. */
CORE_ADDR saved_pc;
/* Only valid if SKIPPED_FRAMES is non-zero. This is the symbol
of the outermost skipped inline function. It's used to find the
call site of the current frame. */
struct symbol *skipped_symbol;
};
static std::vector<inline_state> inline_states;
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
/* Locate saved inlined frame state for THREAD, if it exists and is
valid. */
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
static struct inline_state *
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
find_inline_frame_state (thread_info *thread)
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
{
auto state_it = std::find_if (inline_states.begin (), inline_states.end (),
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
[thread] (const inline_state &state)
{
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
return state.thread == thread;
});
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
if (state_it == inline_states.end ())
return nullptr;
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
inline_state &state = *state_it;
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
struct regcache *regcache = get_thread_regcache (thread);
CORE_ADDR current_pc = regcache_read_pc (regcache);
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
if (current_pc != state.saved_pc)
{
/* PC has changed - this context is invalid. Use the
default behavior. */
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
unordered_remove (inline_states, state_it);
return nullptr;
}
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
return &state;
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
}
/* Forget about any hidden inlined functions in PTID, which is new or
about to be resumed. PTID may be minus_one_ptid (all processes)
or a PID (all threads in this process). */
void
clear_inline_frame_state (ptid_t ptid)
{
if (ptid == minus_one_ptid)
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
{
inline_states.clear ();
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
return;
}
if (ptid.is_pid ())
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
{
int pid = ptid.pid ();
auto it = std::remove_if (inline_states.begin (), inline_states.end (),
[pid] (const inline_state &state)
{
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
return pid == state.thread->inf->pid;
});
inline_states.erase (it, inline_states.end ());
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
return;
}
auto it = std::find_if (inline_states.begin (), inline_states.end (),
[&ptid] (const inline_state &state)
{
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
return ptid == state.thread->ptid;
});
if (it != inline_states.end ())
unordered_remove (inline_states, it);
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
}
static void
inline_frame_this_id (struct frame_info *this_frame,
void **this_cache,
struct frame_id *this_id)
{
struct symbol *func;
/* In order to have a stable frame ID for a given inline function,
we must get the stack / special addresses from the underlying
Fix PR backtrace/15558 This PR is about an assertion failure in GDB that can be triggered by setting "backtrace limit" to a value that causes GDB to stop unwinding after an inline frame. In this case, an assertion in inline_frame_this_id will trigger: /* We need a valid frame ID, so we need to be based on a valid frame. (...). */ gdb_assert (frame_id_p (*this_id)); Looking at the function: static void inline_frame_this_id (struct frame_info *this_frame, void **this_cache, struct frame_id *this_id) { struct symbol *func; /* In order to have a stable frame ID for a given inline function, we must get the stack / special addresses from the underlying real frame's this_id method. So we must call get_prev_frame. Because we are inlined into some function, there must be previous frames, so this is safe - as long as we're careful not to create any cycles. */ *this_id = get_frame_id (get_prev_frame (this_frame)); we see we're computing the frame id for the inline frame. If this is an inline frame, which is a virtual frame constructed based on debug info, on top of a real stack frame, we should _always_ be able to find where the frame was inlined into, as that ultimately just means peeling off the virtual frames on top of the real stack frame. If there ultimately was no prev (real) stack frame, then we wouldn't have been able to construct the inline frame either, by design. That's what the assertion catches. So we have an inline frame, we should _always_ be able to compute its ID, even if that means bypassing the user backtrace limits to get at the real stack frame's info. The problem is that inline_frame_id calls get_prev_frame, and that takes user backtrace limits into account. Code that wants to bypass the limits calls get_prev_frame_1 instead. Note how get_prev_frame_1 already skips all checks for inline frames: /* If we are unwinding from an inline frame, all of the below tests were already performed when we unwound from the next non-inline frame. We must skip them, since we can not get THIS_FRAME's ID until we have unwound all the way down to the previous non-inline frame. */ if (get_frame_type (this_frame) == INLINE_FRAME) return get_prev_frame_if_no_cycle (this_frame); And note how the related frame_unwind_caller_id function also uses get_prev_frame_1: struct frame_id frame_unwind_caller_id (struct frame_info *next_frame) { struct frame_info *this_frame; /* Use get_prev_frame_1, and not get_prev_frame. The latter will truncate the frame chain, leading to this function unintentionally returning a null_frame_id (e.g., when a caller requests the frame ID of "main()"s caller. */ next_frame = skip_artificial_frames (next_frame); this_frame = get_prev_frame_1 (next_frame); if (this_frame) return get_frame_id (skip_artificial_frames (this_frame)); else return null_frame_id; } get_prev_frame_1 is currently static in frame.c. As a _1 suffix is not a good name for an extern function, I've renamed it. Tested on x86-64 Fedora 17. gdb/ 2014-04-18 Pedro alves <palves@redhat.com> Tom Tromey <tromey@redhat.com> PR backtrace/15558 * frame.c (get_prev_frame_1): Rename to ... (get_prev_frame_always): ... this, and make extern. Adjust. (skip_artificial_frames): Use get_prev_frame_always. (frame_unwind_caller_id, frame_pop, get_prev_frame) (get_frame_unwind_stop_reason): Adjust to rename. * frame.h (get_prev_frame_always): Declare. * inline-frame.c: Include frame.h. (inline_frame_this_id): Use get_prev_frame_always. gdb/testsuite/ 2014-04-18 Tom Tromey <palves@redhat.com> Pedro alves <tromey@redhat.com> PR backtrace/15558 * gdb.opt/inline-bt.exp: Test backtracing from an inline function with a backtrace limit. * gdb.python/py-frame-inline.exp: Test running to an inline function with a backtrace limit, and printing the newest frame. * gdb.python/py-frame-inline.c (main): Call f.
2014-04-18 11:15:21 +02:00
real frame's this_id method. So we must call
get_prev_frame_always. Because we are inlined into some
function, there must be previous frames, so this is safe - as
long as we're careful not to create any cycles. */
*this_id = get_frame_id (get_prev_frame_always (this_frame));
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
/* We need a valid frame ID, so we need to be based on a valid
frame. FSF submission NOTE: this would be a good assertion to
apply to all frames, all the time. That would fix the ambiguity
of null_frame_id (between "no/any frame" and "the outermost
frame"). This will take work. */
gdb_assert (frame_id_p (*this_id));
/* For now, require we don't match outer_frame_id either (see
comment above). */
gdb_assert (!frame_id_eq (*this_id, outer_frame_id));
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
/* Future work NOTE: Alexandre Oliva applied a patch to GCC 4.3
which generates DW_AT_entry_pc for inlined functions when
possible. If this attribute is available, we should use it
in the frame ID (and eventually, to set breakpoints). */
func = get_frame_function (this_frame);
gdb_assert (func != NULL);
Use BLOCK_ENTRY_PC in place of most uses of BLOCK_START This change/patch substitues BLOCK_ENTRY_PC for BLOCK_START in places where BLOCK_START is used to obtain the address at which execution should enter the block. Since blocks can now contain non-contiguous ranges, the BLOCK_START - which is still be the very lowest address in the block - might not be the same as BLOCK_ENTRY_PC. There is a change to infrun.c which is less obvious and less mechanical. I'm posting it as a separate patch. gdb/ChangeLog: * ax-gdb.c (gen_var_ref): Use BLOCK_ENTRY_PC in place of BLOCK_START. * blockframe.c (get_pc_function_start): Likewise. * compile/compile-c-symbols.c (convert_one_symbol): Likewise. (gcc_symbol_address): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * compile/compile.c (get_expr_block_and_pc): Likewise. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. (func_addr_to_tail_call_list): Likewise. * findvar.c (default_read_var_value): Likewise. * inline-frame.c (inline_frame_this_id): Likewise. (skip-inline_frames): Likewise. * infcmd.c (until_next_command): Likewise. * linespec.c (convert_linespec_to_sals): Likewise. * parse.c (parse_exp_in_context_1): Likewise. * printcmd.c (build_address_symbolic): likewise. (info_address_command): Likewise. symtab.c (find_function_start_sal): Likewise. (skip_prologue_sal): Likewise. (find_function_alias_target): Likewise. (find_gnu_ifunc): Likewise. * stack.c (find_frame_funname): Likewise. * symtab.c (fixup_symbol_section): Likewise. (find_function_start_sal): Likewise. (skip_prologue_sal): Likewsie. (find_function_alias_target): Likewise. (find_gnu_ifunc): Likewise. * tracepoint.c (info_scope_command): Likewise. * value.c (value_fn_field): Likewise.
2018-08-24 01:00:49 +02:00
(*this_id).code_addr = BLOCK_ENTRY_PC (SYMBOL_BLOCK_VALUE (func));
(*this_id).artificial_depth++;
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
}
static struct value *
inline_frame_prev_register (struct frame_info *this_frame, void **this_cache,
int regnum)
{
/* Use get_frame_register_value instead of
frame_unwind_got_register, to avoid requiring this frame's ID.
This frame's ID depends on the previous frame's ID (unusual), and
the previous frame's ID depends on this frame's unwound
registers. If unwinding registers from this frame called
get_frame_id, there would be a loop.
Do not copy this code into any other unwinder! Inlined functions
are special; other unwinders must not have a dependency on the
previous frame's ID, and therefore can and should use
frame_unwind_got_register instead. */
return get_frame_register_value (this_frame, regnum);
}
/* Check whether we are at an inlining site that does not already
have an associated frame. */
static int
inline_frame_sniffer (const struct frame_unwind *self,
struct frame_info *this_frame,
void **this_cache)
{
CORE_ADDR this_pc;
constify struct block in some places This makes some spots in gdb, particularly general_symbol_info, use a "const struct block", then fixes the fallout. The justification is that, ordinarily, blocks ought to be readonly. Note though that we can't add "const" in the blockvector due to block relocation. This can be done once blocks are made independent of the program space. 2014-06-18 Tom Tromey <tromey@redhat.com> * varobj.c (varobj_create): Update. * valops.c (value_of_this): Update. * tracepoint.c (add_local_symbols, scope_info): Update. * symtab.h (struct general_symbol_info) <block>: Now const. * symtab.c (skip_prologue_sal) (default_make_symbol_completion_list_break_on) (skip_prologue_using_sal): Update. * stack.h (iterate_over_block_locals) (iterate_over_block_local_vars): Update. * stack.c (print_frame_args): Update. (iterate_over_block_locals, iterate_over_block_local_vars): Make parameter const. (get_selected_block): Make return type const. * python/py-frame.c (frapy_block): Update. * python/py-block.c (gdbpy_block_for_pc): Update. * p-exp.y (%union) <bval>: Now const. * mi/mi-cmd-stack.c (list_args_or_locals): Update. * mdebugread.c (mylookup_symbol, parse_procedure): Update. * m2-exp.y (%union) <bval>: Now const. * linespec.c (get_current_search_block): Make return type const. (create_sals_line_offset, find_label_symbols): Update. * inline-frame.c (inline_frame_sniffer, skip_inline_frames): Update. (block_starting_point_at): Make "block" const. * infrun.c (insert_exception_resume_breakpoint): Make "b" const. (check_exception_resume): Update. * guile/scm-frame.c (gdbscm_frame_block): Update. * guile/scm-block.c (gdbscm_lookup_block): Update. * frame.h (get_frame_block): Update. (get_selected_block): Make return type const. * frame.c (frame_id_inner): Update. * f-valprint.c (info_common_command_for_block) (info_common_command): Update. * dwarf2loc.c (dwarf2_find_location_expression) (dwarf_expr_frame_base, dwarf2_compile_expr_to_ax) (locexpr_describe_location_piece): Update. * c-exp.y (%union) <bval>: Now const. * breakpoint.c (resolve_sal_pc): Update. * blockframe.c (get_frame_block):Make return type const. (get_pc_function_start, get_frame_function, find_pc_sect_function) (block_innermost_frame): Update. * block.h (blockvector_for_pc, blockvector_for_pc_sect) (block_for_pc, block_for_pc_sect): Update. * block.c (blockvector_for_pc_sect, blockvector_for_pc): Make 'pblock' const. (block_for_pc_sect, block_for_pc): Make return type const. * ax-gdb.c (gen_expr): Update. * alpha-mdebug-tdep.c (find_proc_desc): Update. * ada-lang.c (ada_read_renaming_var_value): Make 'block' const. (ada_make_symbol_completion_list, ada_add_exceptions_from_frame) (ada_read_var_value): Update. * ada-exp.y (struct name_info) <block>: Now const. (%union): Likewise. (block_lookup): Constify.
2013-03-12 16:51:37 +01:00
const struct block *frame_block, *cur_block;
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
int depth;
struct frame_info *next_frame;
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
struct inline_state *state = find_inline_frame_state (inferior_thread ());
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
this_pc = get_frame_address_in_block (this_frame);
frame_block = block_for_pc (this_pc);
if (frame_block == NULL)
return 0;
/* Calculate DEPTH, the number of inlined functions at this
location. */
depth = 0;
cur_block = frame_block;
while (BLOCK_SUPERBLOCK (cur_block))
{
if (block_inlined_p (cur_block))
depth++;
out of line functions nested inside inline functions. This patch improves the handling of out-of-line functions nested inside functions that have been inlined. Consider for instance a situation where function Foo_O224_021 has a function Child1 declared in it, which itself has a function Child2 nested inside Child1. After compiling the program with optimization on, Child1 gets inlined, but not Child2. After inserting a breakpoint on Child2, and running the program until reaching that breakpoint, we get the following backtrace: % gdb foo_o224_021 (gdb) break foo_o224_021.child1.child2 (gdb) run [...] Breakpoint 1, foo_o224_021 () at foo_o224_021.adb:28 28 Child1; (gdb) bt #0 0x0000000000402400 in foo_o224_021 () at foo_o224_021.adb:28 #1 0x00000000004027a4 in foo_o224_021.child1 () at foo_o224_021.adb:23 #2 0x00000000004027a4 in foo_o224_021 () at foo_o224_021.adb:28 GDB reports the wrong function name for frame #0. We also get the same kind of error in the "Breakpoint 1, foo_o224_021 () [...]" message. In both cases, the function name should be foo_o224_021.child1.child2, and the parameters should be "s=...". What happens is that the inlined frame handling does not handle well the case where an inlined function is calling an out-of-line function which was declared inside the inlined function's scope. In particular, looking first at the inlined-frame sniffer when applying to frame #0: /* Calculate DEPTH, the number of inlined functions at this location. */ depth = 0; cur_block = frame_block; while (BLOCK_SUPERBLOCK (cur_block)) { if (block_inlined_p (cur_block)) depth++; cur_block = BLOCK_SUPERBLOCK (cur_block); } What happens is that cur_block starts as the block associated to child2, which is not inlined. We shoud be stopping here, but instead, we keep walking the superblock chain, which takes us all the way to Foo_O224_021's block, via Child2's block. And since Child1 was inlined, we end up with a depth count of 1, wrongly making GDB think that frame #0 is an inlined frame. Same kind of issue inside skip_inline_frames. The fix is to stop checking for inlined frames as soon as we see a block corresponding to a function which is not inlined. This is the behavior we now obtain: (gdb) run [...] Breakpoint 1, foo_o224_021.child1.child2 (s=...) at foo_o224_021.adb:9 9 function Child2 (S : String) return Boolean is (gdb) bt #0 0x0000000000402400 in foo_o224_021.child1.child2 (s=...) at foo_o224_021.adb:9 #1 0x00000000004027a4 in foo_o224_021.child1 () at foo_o224_021.adb:23 #2 0x00000000004027a4 in foo_o224_021 () at foo_o224_021.adb:28 gdb/ChangeLog: * inline-frame.c (inline_frame_sniffer, skip_inline_frames): Stop counting inlined frames as soon as an out-of-line function is found. gdb/testsuite/ChangeLog: * gdb.ada/out_of_line_in_inlined.exp: Add run and "bt" tests.
2015-04-21 19:34:04 +02:00
else if (BLOCK_FUNCTION (cur_block) != NULL)
break;
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
cur_block = BLOCK_SUPERBLOCK (cur_block);
}
/* Check how many inlined functions already have frames. */
for (next_frame = get_next_frame (this_frame);
next_frame && get_frame_type (next_frame) == INLINE_FRAME;
next_frame = get_next_frame (next_frame))
{
gdb_assert (depth > 0);
depth--;
}
/* If this is the topmost frame, or all frames above us are inlined,
then check whether we were requested to skip some frames (so they
can be stepped into later). */
if (state != NULL && state->skipped_frames > 0 && next_frame == NULL)
{
gdb_assert (depth >= state->skipped_frames);
depth -= state->skipped_frames;
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
}
/* If all the inlined functions here already have frames, then pass
to the normal unwinder for this PC. */
if (depth == 0)
return 0;
/* If the next frame is an inlined function, but not the outermost, then
we are the next outer. If it is not an inlined function, then we
are the innermost inlined function of a different real frame. */
return 1;
}
const struct frame_unwind inline_frame_unwind = {
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
INLINE_FRAME,
gdb/ * frame.c (frame_unwind_register): Throw an error if unwinding the register failed. * get_prev_frame_1 (get_prev_frame_1): Ask the unwinder if there's an unwind stop reason. (frame_stop_reason_string): Handle UNWIND_UNAVAILABLE. * frame.h (enum unwind_stop_reason) <UNWIND_OUTERMOST, UNWIND_UNAVAILABLE>: New. * inline-frame.c (inline_frame_unwind): Install default_frame_unwind_stop_reason. * frame-unwind.c: Include "exceptions.h". (frame_unwind_find_by_frame): Swallow NOT_AVAILABLE_ERROR errors. (default_frame_unwind_stop_reason): New. * frame-unwind.h (frame_unwind_stop_reason_ftype): New typedef. (default_frame_unwind_stop_reason): Declare. (struct frame_unwind) <stop_reason>: New function pointer. * dummy-frame.c: Install default_frame_unwind_stop_reason. * dwarf2-frame.c: Include exceptions.h. (struct dwarf2_frame_cache) <unavailable_retaddr>: New field. (dwarf2_frame_cache): Swallow NOT_AVAILABLE_ERROR errors when computing the CFA. If such an error was thrown, set unavailable_retaddr. (dwarf2_frame_unwind_stop_reason): New. (dwarf2_frame_this_id): Don't build a frame id if the CFA was unavailable. (dwarf2_frame_unwind): Install dwarf2_frame_unwind_stop_reason. (dwarf2_signal_frame_unwind): Ditto. * amd64-tdep.c: Include "exceptions.h". (struct amd64_frame_cache): New field "base_p". (amd64_init_frame_cache): Clear it. (amd64_frame_cache_1): New, factored out from amd64_frame_cache. Avoid reading registers with functions that throw if the register is not necessary to compute the frame base. (amd64_frame_cache): Reimplement wrapping amd64_frame_cache_1, and swallowing NOT_AVAILABLE_ERROR. (amd64_frame_unwind_stop_reason): New. (amd64_frame_this_id): Don't build a frame id if the frame base was unavailable. (amd64_frame_unwind): Install amd64_frame_unwind_stop_reason. (amd64_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set base_p if the frame base was computable. (amd64_sigtramp_frame_unwind_stop_reason): New. (amd64_sigtramp_frame_this_id): Don't build a frame id if the frame base was unavailable. (amd64_sigtramp_frame_unwind): Install amd64_sigtramp_frame_unwind_stop_reason. (amd64_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set base_p if the frame base was computable. (amd64_epilogue_frame_unwind_stop_reason): New. (amd64_epilogue_frame_this_id): Don't build a frame id if the frame base was unavailable. (amd64_epilogue_frame_unwind): Install amd64_epilogue_frame_unwind_stop_reason. * i386-tdep.c: Include "exceptions.h". (struct i386_frame_cache): New field "base_p". (i386_init_frame_cache): Clear it. (i386_frame_cache_1): New, factored out from amd64_frame_cache. Avoid reading registers with functions that throw if the register is not necessary to compute the frame base. (i386_frame_cache): Reimplement wrapping amd64_frame_cache_1, and swallowing NOT_AVAILABLE_ERROR. (i386_frame_unwind_stop_reason): New. (i386_frame_this_id): Don't build a frame id if the frame base was unavailable. (i386_frame_prev_register): Handle unavailable SP. (i386_frame_unwind): Install i386_frame_unwind_stop_reason. (i386_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set base_p if the frame base was computable. (i386_epilogue_frame_unwind_stop_reason): New. (i386_epilogue_frame_this_id): Don't build a frame id if the frame base was unavailable. (i386_epilogue_frame_unwind): Install i386_epilogue_frame_unwind_stop_reason. (i386_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set base_p if the frame base was computable. (i386_sigtramp_frame_unwind_stop_reason): New. (i386_sigtramp_frame_this_id): Don't build a frame id if the frame base was unavailable. (i386_sigtramp_frame_unwind): Install i386_sigtramp_frame_unwind_stop_reason. * sentinel-frame.c (sentinel_frame_prev_register): Use the value type's size, not the register's. (sentinel_frame_unwind): Install default_frame_unwind_stop_reason. * alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind): Install default_frame_unwind_stop_reason. * alpha-tdep.c (alpha_sigtramp_frame_unwind) (alpha_heuristic_frame_unwind): Ditto. * amd64obsd-tdep.c (amd64obsd_trapframe_unwind): Ditto. * arm-tdep.c (arm_prologue_unwind, arm_stub_unwind): Ditto. * avr-tdep.c (avr_frame_unwind): Ditto. * cris-tdep.c (cris_sigtramp_frame_unwind, cris_frame_unwind): Ditto. * frv-linux-tdep.c (frv_linux_sigtramp_frame_unwind): Ditto. * frv-tdep.c (frv_frame_unwind): Ditto. * h8300-tdep.c (h8300_frame_unwind): Ditto. * hppa-hpux-tdep.c (hppa_hpux_sigtramp_frame_unwind): Ditto. * hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind): Ditto. * hppa-tdep.c (hppa_frame_unwind, hppa_fallback_frame_unwind) (hppa_stub_frame_unwind): Ditto. * i386obsd-tdep.c (i386obsd_trapframe_unwind): Ditto. * ia64-tdep.c (ia64_frame_unwind, ia64_sigtramp_frame_unwind) (ia64_libunwind_frame_unwind) (ia64_libunwind_sigtramp_frame_unwind): Ditto. * iq2000-tdep.c (iq2000_frame_unwind): Ditto. * lm32-tdep.c (lm32_frame_unwind): Ditto. * m32c-tdep.c (m32c_unwind): Ditto. * m32r-linux-tdep.c (m32r_linux_sigtramp_frame_unwind): Ditto. * m32r-tdep.c (m32r_frame_unwind): Ditto. * m68hc11-tdep.c (m68hc11_frame_unwind): Ditto. * m68k-tdep.c (m68k_frame_unwind): Ditto. * m68klinux-tdep.c (m68k_linux_sigtramp_frame_unwind): Ditto. * m88k-tdep.c (m88k_frame_unwind): Ditto. * mep-tdep.c (mep_frame_unwind): Ditto. * microblaze-tdep.c (microblaze_frame_unwind): Ditto. * mips-tdep.c (mips_insn16_frame_unwind, mips_insn32_frame_unwind) (mips_stub_frame_unwind): Ditto. * mn10300-tdep.c (mn10300_frame_unwind): Ditto. * moxie-tdep.c (moxie_frame_unwind): Ditto. * mt-tdep.c (mt_frame_unwind): Ditto. * ppc-linux-tdep.c (ppu2spu_unwind): Ditto. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_unwind): Ditto. * rs6000-tdep.c (rs6000_frame_unwind): Ditto. * s390-tdep.c (s390_frame_unwind, s390_stub_frame_unwind) (s390_sigtramp_frame_unwind): Ditto. * score-tdep.c (score_prologue_unwind): Ditto. * sh-tdep.c (sh_frame_unwind): Ditto. * sh64-tdep.c (sh64_frame_unwind): Ditto. * sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_unwind): Ditto. * sparc-tdep.c (sparc32_frame_unwind): Ditto. * sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_unwind): Ditto. * sparc64-tdep.c (sparc64_frame_unwind): Ditto. * sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_unwind): Ditto. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_unwind): Ditto. * sparc64obsd-tdep.c (sparc64obsd_frame_unwind) (sparc64obsd_trapframe_unwind): Ditto. * sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_unwind): Ditto. * sparcobsd-tdep.c (sparc32obsd_sigtramp_frame_unwind): Ditto. * spu-tdep.c (spu_frame_unwind, spu2ppu_unwind): Ditto. * v850-tdep.c (v850_frame_unwind): Ditto. * vax-tdep.c (vax_frame_unwind): Ditto. * vaxobsd-tdep.c (vaxobsd_sigtramp_frame_unwind): Ditto. * xstormy16-tdep.c (frame_unwind xstormy16_frame_unwind): Ditto. * xtensa-tdep.c (xtensa_unwind): Ditto.
2011-03-18 19:52:32 +01:00
default_frame_unwind_stop_reason,
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
inline_frame_this_id,
inline_frame_prev_register,
NULL,
inline_frame_sniffer
};
/* Return non-zero if BLOCK, an inlined function block containing PC,
has a group of contiguous instructions starting at PC (but not
before it). */
static int
constify struct block in some places This makes some spots in gdb, particularly general_symbol_info, use a "const struct block", then fixes the fallout. The justification is that, ordinarily, blocks ought to be readonly. Note though that we can't add "const" in the blockvector due to block relocation. This can be done once blocks are made independent of the program space. 2014-06-18 Tom Tromey <tromey@redhat.com> * varobj.c (varobj_create): Update. * valops.c (value_of_this): Update. * tracepoint.c (add_local_symbols, scope_info): Update. * symtab.h (struct general_symbol_info) <block>: Now const. * symtab.c (skip_prologue_sal) (default_make_symbol_completion_list_break_on) (skip_prologue_using_sal): Update. * stack.h (iterate_over_block_locals) (iterate_over_block_local_vars): Update. * stack.c (print_frame_args): Update. (iterate_over_block_locals, iterate_over_block_local_vars): Make parameter const. (get_selected_block): Make return type const. * python/py-frame.c (frapy_block): Update. * python/py-block.c (gdbpy_block_for_pc): Update. * p-exp.y (%union) <bval>: Now const. * mi/mi-cmd-stack.c (list_args_or_locals): Update. * mdebugread.c (mylookup_symbol, parse_procedure): Update. * m2-exp.y (%union) <bval>: Now const. * linespec.c (get_current_search_block): Make return type const. (create_sals_line_offset, find_label_symbols): Update. * inline-frame.c (inline_frame_sniffer, skip_inline_frames): Update. (block_starting_point_at): Make "block" const. * infrun.c (insert_exception_resume_breakpoint): Make "b" const. (check_exception_resume): Update. * guile/scm-frame.c (gdbscm_frame_block): Update. * guile/scm-block.c (gdbscm_lookup_block): Update. * frame.h (get_frame_block): Update. (get_selected_block): Make return type const. * frame.c (frame_id_inner): Update. * f-valprint.c (info_common_command_for_block) (info_common_command): Update. * dwarf2loc.c (dwarf2_find_location_expression) (dwarf_expr_frame_base, dwarf2_compile_expr_to_ax) (locexpr_describe_location_piece): Update. * c-exp.y (%union) <bval>: Now const. * breakpoint.c (resolve_sal_pc): Update. * blockframe.c (get_frame_block):Make return type const. (get_pc_function_start, get_frame_function, find_pc_sect_function) (block_innermost_frame): Update. * block.h (blockvector_for_pc, blockvector_for_pc_sect) (block_for_pc, block_for_pc_sect): Update. * block.c (blockvector_for_pc_sect, blockvector_for_pc): Make 'pblock' const. (block_for_pc_sect, block_for_pc): Make return type const. * ax-gdb.c (gen_expr): Update. * alpha-mdebug-tdep.c (find_proc_desc): Update. * ada-lang.c (ada_read_renaming_var_value): Make 'block' const. (ada_make_symbol_completion_list, ada_add_exceptions_from_frame) (ada_read_var_value): Update. * ada-exp.y (struct name_info) <block>: Now const. (%union): Likewise. (block_lookup): Constify.
2013-03-12 16:51:37 +01:00
block_starting_point_at (CORE_ADDR pc, const struct block *block)
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
{
constify some blockvector APIs Generally, the blockvector ought to be readonly. So, this patch makes the blockvector const in the symtab, and also changes various blockvector APIs to be const. This patch has a couple of spots that cast away const. I consider these to be ok because they occur in mdebugread and are used while constructing the blockvector. I have added comments at these spots. 2014-06-18 Tom Tromey <tromey@redhat.com> * symtab.h (struct symtab) <blockvector>: Now const. * ada-lang.c (ada_add_global_exceptions): Update. * buildsym.c (augment_type_symtab): Update. * dwarf2read.c (dw2_lookup_symbol): Update. * jit.c (finalize_symtab): Update. * jv-lang.c (add_class_symtab_symbol): Update. * mdebugread.c (parse_symbol, add_block, sort_blocks, new_symtab): Update. * objfiles.c (objfile_relocate1): Update. * psymtab.c (lookup_symbol_aux_psymtabs) (maintenance_check_psymtabs): Update. * python/py-symtab.c (stpy_global_block, stpy_static_block): Update. * spu-tdep.c (spu_catch_start): Update. * symmisc.c (dump_symtab_1): Update. * symtab.c (lookup_global_symbol_from_objfile) (lookup_symbol_aux_objfile, lookup_symbol_aux_quick) (basic_lookup_transparent_type_quick) (basic_lookup_transparent_type, find_pc_sect_symtab) (find_pc_sect_line, search_symbols): Update. * block.c (find_block_in_blockvector): Make "bl" const. (blockvector_for_pc_sect, blockvector_for_pc): Make return type const. (blockvector_contains_pc): Make "bv" const. (block_for_pc_sect): Update. * block.h (blockvector_for_pc, blockvector_for_pc_sect) (blockvector_contains_pc): Update. * breakpoint.c (resolve_sal_pc): Update. * inline-frame.c (block_starting_point_at): Update.
2014-06-10 21:11:19 +02:00
const struct blockvector *bv;
More block constification I noticed that there are still many places referring to non-const blocks. This constifies all the remaining ones that I found that could be constified. In a few spots, this search found unused variables or fields. I removed these. I've also removed some unnecessary casts to "struct block *". gdb/ChangeLog 2019-03-24 Tom Tromey <tom@tromey.com> * c-exp.y (typebase): Remove casts. * gdbtypes.c (lookup_unsigned_typename, ) (lookup_signed_typename): Remove cast. * eval.c (parse_to_comma_and_eval): Remove cast. * parse.c (write_dollar_variable): Remove cast. * block.h (struct block) <superblock>: Now const. * symfile-debug.c (debug_qf_map_matching_symbols): Update. * psymtab.c (psym_map_matching_symbols): Make "block" const. (map_block): Make "block" const. * symfile.h (struct quick_symbol_functions) <map_matching_symbols>: Constify block argument to "callback". * symtab.c (basic_lookup_transparent_type_quick): Make "block" const. (find_pc_sect_compunit_symtab): Make "b" const. (find_symbol_at_address): Likewise. (search_symbols): Likewise. * dwarf2read.c (dw2_lookup_symbol): Make "block" const. (dw2_debug_names_lookup_symbol): Likewise. (dw2_map_matching_symbols): Update. * p-valprint.c (pascal_val_print): Remove "block". * ada-lang.c (ada_add_global_exceptions): Make "b" const. (aux_add_nonlocal_symbols): Make "block" const. (resolve_subexp): Remove cast. * linespec.c (iterate_over_all_matching_symtabs): Make "block" const. (iterate_over_file_blocks): Likewise. * f-exp.y (%union) <bval>: Remove. * coffread.c (patch_opaque_types): Make "b" const. * spu-tdep.c (spu_catch_start): Make "block" const. * c-valprint.c (print_unpacked_pointer): Remove "block". * symmisc.c (dump_symtab_1): Make "b" const. (block_depth): Make "block" const. * d-exp.y (%union) <bval>: Remove. * cp-support.h (cp_lookup_rtti_type): Update. * cp-support.c (cp_lookup_rtti_type): Make "block" const. * psymtab.c (psym_lookup_symbol): Make "block" const. (maintenance_check_psymtabs): Make "b" const. * python/py-framefilter.c (extract_sym): Make "sym_block" const. (enumerate_locals, enumerate_args): Update. * python/py-symtab.c (stpy_global_block): Make "block" const. (stpy_static_block): Likewise. * inline-frame.c (block_starting_point_at): Make "new_block" const. * block.c (find_block_in_blockvector): Make return type const. (blockvector_for_pc_sect): Make "b" const. (find_block_in_blockvector): Make "b" const.
2019-03-22 22:54:10 +01:00
const struct block *new_block;
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
bv = blockvector_for_pc (pc, NULL);
if (BLOCKVECTOR_MAP (bv) == NULL)
return 0;
More block constification I noticed that there are still many places referring to non-const blocks. This constifies all the remaining ones that I found that could be constified. In a few spots, this search found unused variables or fields. I removed these. I've also removed some unnecessary casts to "struct block *". gdb/ChangeLog 2019-03-24 Tom Tromey <tom@tromey.com> * c-exp.y (typebase): Remove casts. * gdbtypes.c (lookup_unsigned_typename, ) (lookup_signed_typename): Remove cast. * eval.c (parse_to_comma_and_eval): Remove cast. * parse.c (write_dollar_variable): Remove cast. * block.h (struct block) <superblock>: Now const. * symfile-debug.c (debug_qf_map_matching_symbols): Update. * psymtab.c (psym_map_matching_symbols): Make "block" const. (map_block): Make "block" const. * symfile.h (struct quick_symbol_functions) <map_matching_symbols>: Constify block argument to "callback". * symtab.c (basic_lookup_transparent_type_quick): Make "block" const. (find_pc_sect_compunit_symtab): Make "b" const. (find_symbol_at_address): Likewise. (search_symbols): Likewise. * dwarf2read.c (dw2_lookup_symbol): Make "block" const. (dw2_debug_names_lookup_symbol): Likewise. (dw2_map_matching_symbols): Update. * p-valprint.c (pascal_val_print): Remove "block". * ada-lang.c (ada_add_global_exceptions): Make "b" const. (aux_add_nonlocal_symbols): Make "block" const. (resolve_subexp): Remove cast. * linespec.c (iterate_over_all_matching_symtabs): Make "block" const. (iterate_over_file_blocks): Likewise. * f-exp.y (%union) <bval>: Remove. * coffread.c (patch_opaque_types): Make "b" const. * spu-tdep.c (spu_catch_start): Make "block" const. * c-valprint.c (print_unpacked_pointer): Remove "block". * symmisc.c (dump_symtab_1): Make "b" const. (block_depth): Make "block" const. * d-exp.y (%union) <bval>: Remove. * cp-support.h (cp_lookup_rtti_type): Update. * cp-support.c (cp_lookup_rtti_type): Make "block" const. * psymtab.c (psym_lookup_symbol): Make "block" const. (maintenance_check_psymtabs): Make "b" const. * python/py-framefilter.c (extract_sym): Make "sym_block" const. (enumerate_locals, enumerate_args): Update. * python/py-symtab.c (stpy_global_block): Make "block" const. (stpy_static_block): Likewise. * inline-frame.c (block_starting_point_at): Make "new_block" const. * block.c (find_block_in_blockvector): Make return type const. (blockvector_for_pc_sect): Make "b" const. (find_block_in_blockvector): Make "b" const.
2019-03-22 22:54:10 +01:00
new_block = (const struct block *) addrmap_find (BLOCKVECTOR_MAP (bv),
pc - 1);
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
if (new_block == NULL)
return 1;
if (new_block == block || contained_in (new_block, block))
return 0;
/* The immediately preceding address belongs to a different block,
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
which is not a child of this one. Treat this as an entrance into
BLOCK. */
return 1;
}
Don't elide all inlined frames This patch essentially causes GDB to treat inlined frames like "normal" frames from the user's perspective. This means, for example, that when a user sets a breakpoint in an inlined function, GDB will now actually stop "in" that function. Using the test case from breakpoints/17534, 3 static inline void NVIC_EnableIRQ(int IRQn) 4 { 5 volatile int y; 6 y = IRQn; 7 } 8 9 __attribute__( ( always_inline ) ) static inline void __WFI(void) 10 { 11 __asm volatile ("nop"); 12 } 13 14 int main(void) { 15 16 x= 42; 17 18 if (x) 19 NVIC_EnableIRQ(16); 20 else 21 NVIC_EnableIRQ(18); (gdb) b NVIC_EnableIRQ Breakpoint 1 at 0x4003e4: NVIC_EnableIRQ. (2 locations) (gdb) r Starting program: 17534 Breakpoint 1, main () at 17534.c:19 19 NVIC_EnableIRQ(16); Because skip_inline_frames currently skips every inlined frame, GDB "stops" in the caller. This patch adds a new parameter to skip_inline_frames that allows us to pass in a bpstat stop chain. The breakpoint locations on the stop chain can be used to determine if we've stopped inside an inline function (due to a user breakpoint). If we have, we do not elide the frame. With this patch, GDB now reports that the inferior has stopped inside the inlined function: (gdb) r Starting program: 17534 Breakpoint 1, NVIC_EnableIRQ (IRQn=16) at 17534.c:6 6 y = IRQn; Many thanks to Jan and Pedro for guidance on this. gdb/ChangeLog: * breakpoint.c (build_bpstat_chain): New function, moved from bpstat_stop_status. (bpstat_stop_status): Add optional parameter, `stop_chain'. If no stop chain is passed, call build_bpstat_chain to build it. * breakpoint.h (build_bpstat_chain): Declare. (bpstat_stop_status): Move documentation here from breakpoint.c. * infrun.c (handle_signal_stop): Before eliding inlined frames, build the stop chain and pass it to skip_inline_frames. Pass this stop chain to bpstat_stop_status. * inline-frame.c: Include breakpoint.h. (stopped_by_user_bp_inline_frame): New function. (skip_inline_frames): Add parameter `stop_chain'. Move documention to inline-frame.h. If non-NULL, use stopped_by_user_bp_inline_frame to determine whether the frame should be elided. * inline-frame.h (skip_inline_frames): Add parameter `stop_chain'. Add moved documentation and update for new parameter. gdb/testsuite/ChangeLog: * gdb.ada/bp_inlined_func.exp: Update inlined frame locations in expected breakpoint stop locations. * gdb.dwarf2/implptr.exp (implptr_test_baz): Use up/down to move to proper scope to test variable values. * gdb.opt/inline-break.c (inline_func1, not_inline_func1) (inline_func2, not_inline_func2, inline_func3, not_inline_func3): New functions. (main): Call not_inline_func3. * gdb.opt/inline-break.exp: Start inferior and set breakpoints at inline_func1, inline_func2, and inline_func3. Test that when each breakpoint is hit, GDB properly reports both the stop location and the backtrace. Repeat tests for temporary breakpoints.
2018-05-17 21:15:11 +02:00
/* Loop over the stop chain and determine if execution stopped in an
Change inline frame breakpoint skipping logic (fix gdb.gdb/selftest.exp) Currently, gdb.gdb/selftest.exp fails if you build GDB with optimization (-O2, etc.). The reason is that after setting a breakpoint in captured_main, we stop at: ... Breakpoint 1, captured_main_1 (context=<optimized out>) at src/gdb/main.c:492 ... while selftest_setup expects a stop at captured_main. Here, captured_main_1 has been inlined into captured_main, and captured_main has been inlined into gdb_main: ... $ nm ./build/gdb/gdb | egrep ' [tT] .*captured_main|gdb_main' | c++filt 000000000061b950 T gdb_main(captured_main_args*) ... Indeed, the two inlined functions show up in the backtrace: ... (gdb) bt #0 captured_main_1 (context=<optimized out>) at main.c:492 #1 captured_main (data=<optimized out>) at main.c:1147 #2 gdb_main (args=args@entry=0x7fffffffdb80) at main.c:1173 #3 0x000000000040fea5 in main (argc=<optimized out>, argv=<optimized out>) at gdb.c:32 ... We're now stopping at captured_main_1 because commit ddfe970e6bec ("Don't elide all inlined frames") makes GDB present a stop at the innermost inlined frame if the program stopped by a user breakpoint. Now, the selftest.exp testcase explicitly asks to stop at "captured_main", not "captured_main_1", so I'm thinking that it's GDB'S behavior that should be improved. That is what this commit does, by only showing a stop at an inline frame if the user breakpoint was set in that frame's block. Before this commit: (top-gdb) b captured_main Breakpoint 1 at 0x792f99: file src/gdb/main.c, line 492. (top-gdb) r Starting program: build/gdb/gdb Breakpoint 1, captured_main_1 (context=<optimized out>) at src/gdb/main.c:492 492 lim_at_start = (char *) sbrk (0); (top-gdb) After this commit, we now instead get: (top-gdb) b captured_main Breakpoint 1 at 0x791339: file src/gdb/main.c, line 492. (top-gdb) r Starting program: build/gdb/gdb Breakpoint 1, captured_main (data=<optimized out>) at src/gdb/main.c:1147 1147 captured_main_1 (context); (top-gdb) and: (top-gdb) b captured_main_1 Breakpoint 2 at 0x791339: file src/gdb/main.c, line 492. (top-gdb) r Starting program: build/gdb/gdb Breakpoint 2, captured_main_1 (context=<optimized out>) at src/gdb/main.c:492 492 lim_at_start = (char *) sbrk (0); (top-gdb) Note that both captured_main and captured_main_1 resolved to the same address, 0x791339. That is necessary to trigger the issue in question. The gdb.base/inline-break.exp testcase currently does not exercise that, but the new test added by this commit does. That new test fails without the GDB fix and passes with the fix. No regressions on x86-64 GNU/Linux. While at it, the THIS_PC comparison in stopped_by_user_bp_inline_frame is basically a nop, so just remove it -- if a software or hardware breakpoint explains the stop, then it must be that it was installed at the current PC. gdb/ChangeLog: 2018-06-19 Pedro Alves <palves@redhat.com> * inline-frame.c (stopped_by_user_bp_inline_frame): Replace PC parameter with a block parameter. Compare location's block symbol with the frame's block instead of addresses. (skip_inline_frames): Pass the current block instead of the frame's address. Break out as soon as we determine the frame should not be skipped. gdb/testsuite/ChangeLog: 2018-06-19 Pedro Alves <palves@redhat.com> * gdb.opt/inline-break.c (func_inline_callee, func_inline_caller) (func_extern_caller): New. (main): Call func_extern_caller. * gdb.opt/inline-break.exp: Add tests for inline frame skipping logic change.
2018-06-19 17:30:13 +02:00
inlined frame because of a user breakpoint set at FRAME_BLOCK. */
Don't elide all inlined frames This patch essentially causes GDB to treat inlined frames like "normal" frames from the user's perspective. This means, for example, that when a user sets a breakpoint in an inlined function, GDB will now actually stop "in" that function. Using the test case from breakpoints/17534, 3 static inline void NVIC_EnableIRQ(int IRQn) 4 { 5 volatile int y; 6 y = IRQn; 7 } 8 9 __attribute__( ( always_inline ) ) static inline void __WFI(void) 10 { 11 __asm volatile ("nop"); 12 } 13 14 int main(void) { 15 16 x= 42; 17 18 if (x) 19 NVIC_EnableIRQ(16); 20 else 21 NVIC_EnableIRQ(18); (gdb) b NVIC_EnableIRQ Breakpoint 1 at 0x4003e4: NVIC_EnableIRQ. (2 locations) (gdb) r Starting program: 17534 Breakpoint 1, main () at 17534.c:19 19 NVIC_EnableIRQ(16); Because skip_inline_frames currently skips every inlined frame, GDB "stops" in the caller. This patch adds a new parameter to skip_inline_frames that allows us to pass in a bpstat stop chain. The breakpoint locations on the stop chain can be used to determine if we've stopped inside an inline function (due to a user breakpoint). If we have, we do not elide the frame. With this patch, GDB now reports that the inferior has stopped inside the inlined function: (gdb) r Starting program: 17534 Breakpoint 1, NVIC_EnableIRQ (IRQn=16) at 17534.c:6 6 y = IRQn; Many thanks to Jan and Pedro for guidance on this. gdb/ChangeLog: * breakpoint.c (build_bpstat_chain): New function, moved from bpstat_stop_status. (bpstat_stop_status): Add optional parameter, `stop_chain'. If no stop chain is passed, call build_bpstat_chain to build it. * breakpoint.h (build_bpstat_chain): Declare. (bpstat_stop_status): Move documentation here from breakpoint.c. * infrun.c (handle_signal_stop): Before eliding inlined frames, build the stop chain and pass it to skip_inline_frames. Pass this stop chain to bpstat_stop_status. * inline-frame.c: Include breakpoint.h. (stopped_by_user_bp_inline_frame): New function. (skip_inline_frames): Add parameter `stop_chain'. Move documention to inline-frame.h. If non-NULL, use stopped_by_user_bp_inline_frame to determine whether the frame should be elided. * inline-frame.h (skip_inline_frames): Add parameter `stop_chain'. Add moved documentation and update for new parameter. gdb/testsuite/ChangeLog: * gdb.ada/bp_inlined_func.exp: Update inlined frame locations in expected breakpoint stop locations. * gdb.dwarf2/implptr.exp (implptr_test_baz): Use up/down to move to proper scope to test variable values. * gdb.opt/inline-break.c (inline_func1, not_inline_func1) (inline_func2, not_inline_func2, inline_func3, not_inline_func3): New functions. (main): Call not_inline_func3. * gdb.opt/inline-break.exp: Start inferior and set breakpoints at inline_func1, inline_func2, and inline_func3. Test that when each breakpoint is hit, GDB properly reports both the stop location and the backtrace. Repeat tests for temporary breakpoints.
2018-05-17 21:15:11 +02:00
static bool
Change inline frame breakpoint skipping logic (fix gdb.gdb/selftest.exp) Currently, gdb.gdb/selftest.exp fails if you build GDB with optimization (-O2, etc.). The reason is that after setting a breakpoint in captured_main, we stop at: ... Breakpoint 1, captured_main_1 (context=<optimized out>) at src/gdb/main.c:492 ... while selftest_setup expects a stop at captured_main. Here, captured_main_1 has been inlined into captured_main, and captured_main has been inlined into gdb_main: ... $ nm ./build/gdb/gdb | egrep ' [tT] .*captured_main|gdb_main' | c++filt 000000000061b950 T gdb_main(captured_main_args*) ... Indeed, the two inlined functions show up in the backtrace: ... (gdb) bt #0 captured_main_1 (context=<optimized out>) at main.c:492 #1 captured_main (data=<optimized out>) at main.c:1147 #2 gdb_main (args=args@entry=0x7fffffffdb80) at main.c:1173 #3 0x000000000040fea5 in main (argc=<optimized out>, argv=<optimized out>) at gdb.c:32 ... We're now stopping at captured_main_1 because commit ddfe970e6bec ("Don't elide all inlined frames") makes GDB present a stop at the innermost inlined frame if the program stopped by a user breakpoint. Now, the selftest.exp testcase explicitly asks to stop at "captured_main", not "captured_main_1", so I'm thinking that it's GDB'S behavior that should be improved. That is what this commit does, by only showing a stop at an inline frame if the user breakpoint was set in that frame's block. Before this commit: (top-gdb) b captured_main Breakpoint 1 at 0x792f99: file src/gdb/main.c, line 492. (top-gdb) r Starting program: build/gdb/gdb Breakpoint 1, captured_main_1 (context=<optimized out>) at src/gdb/main.c:492 492 lim_at_start = (char *) sbrk (0); (top-gdb) After this commit, we now instead get: (top-gdb) b captured_main Breakpoint 1 at 0x791339: file src/gdb/main.c, line 492. (top-gdb) r Starting program: build/gdb/gdb Breakpoint 1, captured_main (data=<optimized out>) at src/gdb/main.c:1147 1147 captured_main_1 (context); (top-gdb) and: (top-gdb) b captured_main_1 Breakpoint 2 at 0x791339: file src/gdb/main.c, line 492. (top-gdb) r Starting program: build/gdb/gdb Breakpoint 2, captured_main_1 (context=<optimized out>) at src/gdb/main.c:492 492 lim_at_start = (char *) sbrk (0); (top-gdb) Note that both captured_main and captured_main_1 resolved to the same address, 0x791339. That is necessary to trigger the issue in question. The gdb.base/inline-break.exp testcase currently does not exercise that, but the new test added by this commit does. That new test fails without the GDB fix and passes with the fix. No regressions on x86-64 GNU/Linux. While at it, the THIS_PC comparison in stopped_by_user_bp_inline_frame is basically a nop, so just remove it -- if a software or hardware breakpoint explains the stop, then it must be that it was installed at the current PC. gdb/ChangeLog: 2018-06-19 Pedro Alves <palves@redhat.com> * inline-frame.c (stopped_by_user_bp_inline_frame): Replace PC parameter with a block parameter. Compare location's block symbol with the frame's block instead of addresses. (skip_inline_frames): Pass the current block instead of the frame's address. Break out as soon as we determine the frame should not be skipped. gdb/testsuite/ChangeLog: 2018-06-19 Pedro Alves <palves@redhat.com> * gdb.opt/inline-break.c (func_inline_callee, func_inline_caller) (func_extern_caller): New. (main): Call func_extern_caller. * gdb.opt/inline-break.exp: Add tests for inline frame skipping logic change.
2018-06-19 17:30:13 +02:00
stopped_by_user_bp_inline_frame (const block *frame_block, bpstat stop_chain)
Don't elide all inlined frames This patch essentially causes GDB to treat inlined frames like "normal" frames from the user's perspective. This means, for example, that when a user sets a breakpoint in an inlined function, GDB will now actually stop "in" that function. Using the test case from breakpoints/17534, 3 static inline void NVIC_EnableIRQ(int IRQn) 4 { 5 volatile int y; 6 y = IRQn; 7 } 8 9 __attribute__( ( always_inline ) ) static inline void __WFI(void) 10 { 11 __asm volatile ("nop"); 12 } 13 14 int main(void) { 15 16 x= 42; 17 18 if (x) 19 NVIC_EnableIRQ(16); 20 else 21 NVIC_EnableIRQ(18); (gdb) b NVIC_EnableIRQ Breakpoint 1 at 0x4003e4: NVIC_EnableIRQ. (2 locations) (gdb) r Starting program: 17534 Breakpoint 1, main () at 17534.c:19 19 NVIC_EnableIRQ(16); Because skip_inline_frames currently skips every inlined frame, GDB "stops" in the caller. This patch adds a new parameter to skip_inline_frames that allows us to pass in a bpstat stop chain. The breakpoint locations on the stop chain can be used to determine if we've stopped inside an inline function (due to a user breakpoint). If we have, we do not elide the frame. With this patch, GDB now reports that the inferior has stopped inside the inlined function: (gdb) r Starting program: 17534 Breakpoint 1, NVIC_EnableIRQ (IRQn=16) at 17534.c:6 6 y = IRQn; Many thanks to Jan and Pedro for guidance on this. gdb/ChangeLog: * breakpoint.c (build_bpstat_chain): New function, moved from bpstat_stop_status. (bpstat_stop_status): Add optional parameter, `stop_chain'. If no stop chain is passed, call build_bpstat_chain to build it. * breakpoint.h (build_bpstat_chain): Declare. (bpstat_stop_status): Move documentation here from breakpoint.c. * infrun.c (handle_signal_stop): Before eliding inlined frames, build the stop chain and pass it to skip_inline_frames. Pass this stop chain to bpstat_stop_status. * inline-frame.c: Include breakpoint.h. (stopped_by_user_bp_inline_frame): New function. (skip_inline_frames): Add parameter `stop_chain'. Move documention to inline-frame.h. If non-NULL, use stopped_by_user_bp_inline_frame to determine whether the frame should be elided. * inline-frame.h (skip_inline_frames): Add parameter `stop_chain'. Add moved documentation and update for new parameter. gdb/testsuite/ChangeLog: * gdb.ada/bp_inlined_func.exp: Update inlined frame locations in expected breakpoint stop locations. * gdb.dwarf2/implptr.exp (implptr_test_baz): Use up/down to move to proper scope to test variable values. * gdb.opt/inline-break.c (inline_func1, not_inline_func1) (inline_func2, not_inline_func2, inline_func3, not_inline_func3): New functions. (main): Call not_inline_func3. * gdb.opt/inline-break.exp: Start inferior and set breakpoints at inline_func1, inline_func2, and inline_func3. Test that when each breakpoint is hit, GDB properly reports both the stop location and the backtrace. Repeat tests for temporary breakpoints.
2018-05-17 21:15:11 +02:00
{
for (bpstat s = stop_chain; s != NULL; s = s->next)
{
struct breakpoint *bpt = s->breakpoint_at;
if (bpt != NULL && user_breakpoint_p (bpt))
{
bp_location *loc = s->bp_location_at;
enum bp_loc_type t = loc->loc_type;
Fix running to breakpoint set in inline function by lineno/address Commit 61b04dd04ac2 ("Change inline frame breakpoint skipping logic (fix gdb.gdb/selftest.exp)") caused a GDB crash when you set a breakpoint by line number in an inline function, and then run to the breakpoint: $ gdb -q test Reading symbols from test...done. (gdb) b inline-break.c:32 Breakpoint 1 at 0x40062f: file inline-break.c, line 32. (gdb) run Starting program: /[...]/test [1] 75618 segmentation fault /[...]/gdb -q test The problem occurs because we assume that a bp_location's symbol is not NULL, which is not true when we set the breakpoint with a linespec location: Program received signal SIGSEGV, Segmentation fault. 0x00000000006f42bb in stopped_by_user_bp_inline_frame ( stop_chain=<optimized out>, frame_block=<optimized out>) at gdb/inline-frame.c:305 305 && frame_block == SYMBOL_BLOCK_VALUE (loc->symbol)) (gdb) p loc->symbol $1 = (const symbol *) 0x0 The same thing happens if you run to a breakpoint set in an inline function by address: (gdb) b *0x40062f Breakpoint 3 at 0x40062f: file inline-break.c, line 32. To fix this, add a null pointer check, to avoid the crash, and make it so that if there's no symbol for the location, then we present the stop at the inline function. This preserves the previous behavior when e.g., setting a breakpoint by address, with "b *ADDRESS". gdb/ChangeLog: 2018-06-29 Pedro Alves <palves@redhat.com> * inline-frame.c (stopped_by_user_bp_inline_frame): Return true if the the location has no symbol. gdb/testsuite/ChangeLog: 2018-06-29 Pedro Alves <palves@redhat.com> * gdb.opt/inline-break.c (func1): Add "break here" marker. * gdb.opt/inline-break.exp: Test setting breakpoints by line number and address and running to them.
2018-06-29 20:31:49 +02:00
if (t == bp_loc_software_breakpoint
|| t == bp_loc_hardware_breakpoint)
{
/* If the location has a function symbol, check whether
the frame was for that inlined function. If it has
no function symbol, then assume it is. I.e., default
to presenting the stop at the innermost inline
function. */
if (loc->symbol == nullptr
|| frame_block == SYMBOL_BLOCK_VALUE (loc->symbol))
return true;
}
Don't elide all inlined frames This patch essentially causes GDB to treat inlined frames like "normal" frames from the user's perspective. This means, for example, that when a user sets a breakpoint in an inlined function, GDB will now actually stop "in" that function. Using the test case from breakpoints/17534, 3 static inline void NVIC_EnableIRQ(int IRQn) 4 { 5 volatile int y; 6 y = IRQn; 7 } 8 9 __attribute__( ( always_inline ) ) static inline void __WFI(void) 10 { 11 __asm volatile ("nop"); 12 } 13 14 int main(void) { 15 16 x= 42; 17 18 if (x) 19 NVIC_EnableIRQ(16); 20 else 21 NVIC_EnableIRQ(18); (gdb) b NVIC_EnableIRQ Breakpoint 1 at 0x4003e4: NVIC_EnableIRQ. (2 locations) (gdb) r Starting program: 17534 Breakpoint 1, main () at 17534.c:19 19 NVIC_EnableIRQ(16); Because skip_inline_frames currently skips every inlined frame, GDB "stops" in the caller. This patch adds a new parameter to skip_inline_frames that allows us to pass in a bpstat stop chain. The breakpoint locations on the stop chain can be used to determine if we've stopped inside an inline function (due to a user breakpoint). If we have, we do not elide the frame. With this patch, GDB now reports that the inferior has stopped inside the inlined function: (gdb) r Starting program: 17534 Breakpoint 1, NVIC_EnableIRQ (IRQn=16) at 17534.c:6 6 y = IRQn; Many thanks to Jan and Pedro for guidance on this. gdb/ChangeLog: * breakpoint.c (build_bpstat_chain): New function, moved from bpstat_stop_status. (bpstat_stop_status): Add optional parameter, `stop_chain'. If no stop chain is passed, call build_bpstat_chain to build it. * breakpoint.h (build_bpstat_chain): Declare. (bpstat_stop_status): Move documentation here from breakpoint.c. * infrun.c (handle_signal_stop): Before eliding inlined frames, build the stop chain and pass it to skip_inline_frames. Pass this stop chain to bpstat_stop_status. * inline-frame.c: Include breakpoint.h. (stopped_by_user_bp_inline_frame): New function. (skip_inline_frames): Add parameter `stop_chain'. Move documention to inline-frame.h. If non-NULL, use stopped_by_user_bp_inline_frame to determine whether the frame should be elided. * inline-frame.h (skip_inline_frames): Add parameter `stop_chain'. Add moved documentation and update for new parameter. gdb/testsuite/ChangeLog: * gdb.ada/bp_inlined_func.exp: Update inlined frame locations in expected breakpoint stop locations. * gdb.dwarf2/implptr.exp (implptr_test_baz): Use up/down to move to proper scope to test variable values. * gdb.opt/inline-break.c (inline_func1, not_inline_func1) (inline_func2, not_inline_func2, inline_func3, not_inline_func3): New functions. (main): Call not_inline_func3. * gdb.opt/inline-break.exp: Start inferior and set breakpoints at inline_func1, inline_func2, and inline_func3. Test that when each breakpoint is hit, GDB properly reports both the stop location and the backtrace. Repeat tests for temporary breakpoints.
2018-05-17 21:15:11 +02:00
}
}
return false;
}
/* See inline-frame.h. */
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
void
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
skip_inline_frames (thread_info *thread, bpstat stop_chain)
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
{
constify struct block in some places This makes some spots in gdb, particularly general_symbol_info, use a "const struct block", then fixes the fallout. The justification is that, ordinarily, blocks ought to be readonly. Note though that we can't add "const" in the blockvector due to block relocation. This can be done once blocks are made independent of the program space. 2014-06-18 Tom Tromey <tromey@redhat.com> * varobj.c (varobj_create): Update. * valops.c (value_of_this): Update. * tracepoint.c (add_local_symbols, scope_info): Update. * symtab.h (struct general_symbol_info) <block>: Now const. * symtab.c (skip_prologue_sal) (default_make_symbol_completion_list_break_on) (skip_prologue_using_sal): Update. * stack.h (iterate_over_block_locals) (iterate_over_block_local_vars): Update. * stack.c (print_frame_args): Update. (iterate_over_block_locals, iterate_over_block_local_vars): Make parameter const. (get_selected_block): Make return type const. * python/py-frame.c (frapy_block): Update. * python/py-block.c (gdbpy_block_for_pc): Update. * p-exp.y (%union) <bval>: Now const. * mi/mi-cmd-stack.c (list_args_or_locals): Update. * mdebugread.c (mylookup_symbol, parse_procedure): Update. * m2-exp.y (%union) <bval>: Now const. * linespec.c (get_current_search_block): Make return type const. (create_sals_line_offset, find_label_symbols): Update. * inline-frame.c (inline_frame_sniffer, skip_inline_frames): Update. (block_starting_point_at): Make "block" const. * infrun.c (insert_exception_resume_breakpoint): Make "b" const. (check_exception_resume): Update. * guile/scm-frame.c (gdbscm_frame_block): Update. * guile/scm-block.c (gdbscm_lookup_block): Update. * frame.h (get_frame_block): Update. (get_selected_block): Make return type const. * frame.c (frame_id_inner): Update. * f-valprint.c (info_common_command_for_block) (info_common_command): Update. * dwarf2loc.c (dwarf2_find_location_expression) (dwarf_expr_frame_base, dwarf2_compile_expr_to_ax) (locexpr_describe_location_piece): Update. * c-exp.y (%union) <bval>: Now const. * breakpoint.c (resolve_sal_pc): Update. * blockframe.c (get_frame_block):Make return type const. (get_pc_function_start, get_frame_function, find_pc_sect_function) (block_innermost_frame): Update. * block.h (blockvector_for_pc, blockvector_for_pc_sect) (block_for_pc, block_for_pc_sect): Update. * block.c (blockvector_for_pc_sect, blockvector_for_pc): Make 'pblock' const. (block_for_pc_sect, block_for_pc): Make return type const. * ax-gdb.c (gen_expr): Update. * alpha-mdebug-tdep.c (find_proc_desc): Update. * ada-lang.c (ada_read_renaming_var_value): Make 'block' const. (ada_make_symbol_completion_list, ada_add_exceptions_from_frame) (ada_read_var_value): Update. * ada-exp.y (struct name_info) <block>: Now const. (%union): Likewise. (block_lookup): Constify.
2013-03-12 16:51:37 +01:00
const struct block *frame_block, *cur_block;
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
struct symbol *last_sym = NULL;
int skip_count = 0;
/* This function is called right after reinitializing the frame
cache. We try not to do more unwinding than absolutely
necessary, for performance. */
CORE_ADDR this_pc = get_frame_pc (get_current_frame ());
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
frame_block = block_for_pc (this_pc);
if (frame_block != NULL)
{
cur_block = frame_block;
while (BLOCK_SUPERBLOCK (cur_block))
{
if (block_inlined_p (cur_block))
{
/* See comments in inline_frame_this_id about this use
Use BLOCK_ENTRY_PC in place of most uses of BLOCK_START This change/patch substitues BLOCK_ENTRY_PC for BLOCK_START in places where BLOCK_START is used to obtain the address at which execution should enter the block. Since blocks can now contain non-contiguous ranges, the BLOCK_START - which is still be the very lowest address in the block - might not be the same as BLOCK_ENTRY_PC. There is a change to infrun.c which is less obvious and less mechanical. I'm posting it as a separate patch. gdb/ChangeLog: * ax-gdb.c (gen_var_ref): Use BLOCK_ENTRY_PC in place of BLOCK_START. * blockframe.c (get_pc_function_start): Likewise. * compile/compile-c-symbols.c (convert_one_symbol): Likewise. (gcc_symbol_address): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * compile/compile.c (get_expr_block_and_pc): Likewise. * dwarf2loc.c (dwarf2_find_location_expression): Likewise. (func_addr_to_tail_call_list): Likewise. * findvar.c (default_read_var_value): Likewise. * inline-frame.c (inline_frame_this_id): Likewise. (skip-inline_frames): Likewise. * infcmd.c (until_next_command): Likewise. * linespec.c (convert_linespec_to_sals): Likewise. * parse.c (parse_exp_in_context_1): Likewise. * printcmd.c (build_address_symbolic): likewise. (info_address_command): Likewise. symtab.c (find_function_start_sal): Likewise. (skip_prologue_sal): Likewise. (find_function_alias_target): Likewise. (find_gnu_ifunc): Likewise. * stack.c (find_frame_funname): Likewise. * symtab.c (fixup_symbol_section): Likewise. (find_function_start_sal): Likewise. (skip_prologue_sal): Likewsie. (find_function_alias_target): Likewise. (find_gnu_ifunc): Likewise. * tracepoint.c (info_scope_command): Likewise. * value.c (value_fn_field): Likewise.
2018-08-24 01:00:49 +02:00
of BLOCK_ENTRY_PC. */
if (BLOCK_ENTRY_PC (cur_block) == this_pc
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
|| block_starting_point_at (this_pc, cur_block))
{
Don't elide all inlined frames This patch essentially causes GDB to treat inlined frames like "normal" frames from the user's perspective. This means, for example, that when a user sets a breakpoint in an inlined function, GDB will now actually stop "in" that function. Using the test case from breakpoints/17534, 3 static inline void NVIC_EnableIRQ(int IRQn) 4 { 5 volatile int y; 6 y = IRQn; 7 } 8 9 __attribute__( ( always_inline ) ) static inline void __WFI(void) 10 { 11 __asm volatile ("nop"); 12 } 13 14 int main(void) { 15 16 x= 42; 17 18 if (x) 19 NVIC_EnableIRQ(16); 20 else 21 NVIC_EnableIRQ(18); (gdb) b NVIC_EnableIRQ Breakpoint 1 at 0x4003e4: NVIC_EnableIRQ. (2 locations) (gdb) r Starting program: 17534 Breakpoint 1, main () at 17534.c:19 19 NVIC_EnableIRQ(16); Because skip_inline_frames currently skips every inlined frame, GDB "stops" in the caller. This patch adds a new parameter to skip_inline_frames that allows us to pass in a bpstat stop chain. The breakpoint locations on the stop chain can be used to determine if we've stopped inside an inline function (due to a user breakpoint). If we have, we do not elide the frame. With this patch, GDB now reports that the inferior has stopped inside the inlined function: (gdb) r Starting program: 17534 Breakpoint 1, NVIC_EnableIRQ (IRQn=16) at 17534.c:6 6 y = IRQn; Many thanks to Jan and Pedro for guidance on this. gdb/ChangeLog: * breakpoint.c (build_bpstat_chain): New function, moved from bpstat_stop_status. (bpstat_stop_status): Add optional parameter, `stop_chain'. If no stop chain is passed, call build_bpstat_chain to build it. * breakpoint.h (build_bpstat_chain): Declare. (bpstat_stop_status): Move documentation here from breakpoint.c. * infrun.c (handle_signal_stop): Before eliding inlined frames, build the stop chain and pass it to skip_inline_frames. Pass this stop chain to bpstat_stop_status. * inline-frame.c: Include breakpoint.h. (stopped_by_user_bp_inline_frame): New function. (skip_inline_frames): Add parameter `stop_chain'. Move documention to inline-frame.h. If non-NULL, use stopped_by_user_bp_inline_frame to determine whether the frame should be elided. * inline-frame.h (skip_inline_frames): Add parameter `stop_chain'. Add moved documentation and update for new parameter. gdb/testsuite/ChangeLog: * gdb.ada/bp_inlined_func.exp: Update inlined frame locations in expected breakpoint stop locations. * gdb.dwarf2/implptr.exp (implptr_test_baz): Use up/down to move to proper scope to test variable values. * gdb.opt/inline-break.c (inline_func1, not_inline_func1) (inline_func2, not_inline_func2, inline_func3, not_inline_func3): New functions. (main): Call not_inline_func3. * gdb.opt/inline-break.exp: Start inferior and set breakpoints at inline_func1, inline_func2, and inline_func3. Test that when each breakpoint is hit, GDB properly reports both the stop location and the backtrace. Repeat tests for temporary breakpoints.
2018-05-17 21:15:11 +02:00
/* Do not skip the inlined frame if execution
stopped in an inlined frame because of a user
Change inline frame breakpoint skipping logic (fix gdb.gdb/selftest.exp) Currently, gdb.gdb/selftest.exp fails if you build GDB with optimization (-O2, etc.). The reason is that after setting a breakpoint in captured_main, we stop at: ... Breakpoint 1, captured_main_1 (context=<optimized out>) at src/gdb/main.c:492 ... while selftest_setup expects a stop at captured_main. Here, captured_main_1 has been inlined into captured_main, and captured_main has been inlined into gdb_main: ... $ nm ./build/gdb/gdb | egrep ' [tT] .*captured_main|gdb_main' | c++filt 000000000061b950 T gdb_main(captured_main_args*) ... Indeed, the two inlined functions show up in the backtrace: ... (gdb) bt #0 captured_main_1 (context=<optimized out>) at main.c:492 #1 captured_main (data=<optimized out>) at main.c:1147 #2 gdb_main (args=args@entry=0x7fffffffdb80) at main.c:1173 #3 0x000000000040fea5 in main (argc=<optimized out>, argv=<optimized out>) at gdb.c:32 ... We're now stopping at captured_main_1 because commit ddfe970e6bec ("Don't elide all inlined frames") makes GDB present a stop at the innermost inlined frame if the program stopped by a user breakpoint. Now, the selftest.exp testcase explicitly asks to stop at "captured_main", not "captured_main_1", so I'm thinking that it's GDB'S behavior that should be improved. That is what this commit does, by only showing a stop at an inline frame if the user breakpoint was set in that frame's block. Before this commit: (top-gdb) b captured_main Breakpoint 1 at 0x792f99: file src/gdb/main.c, line 492. (top-gdb) r Starting program: build/gdb/gdb Breakpoint 1, captured_main_1 (context=<optimized out>) at src/gdb/main.c:492 492 lim_at_start = (char *) sbrk (0); (top-gdb) After this commit, we now instead get: (top-gdb) b captured_main Breakpoint 1 at 0x791339: file src/gdb/main.c, line 492. (top-gdb) r Starting program: build/gdb/gdb Breakpoint 1, captured_main (data=<optimized out>) at src/gdb/main.c:1147 1147 captured_main_1 (context); (top-gdb) and: (top-gdb) b captured_main_1 Breakpoint 2 at 0x791339: file src/gdb/main.c, line 492. (top-gdb) r Starting program: build/gdb/gdb Breakpoint 2, captured_main_1 (context=<optimized out>) at src/gdb/main.c:492 492 lim_at_start = (char *) sbrk (0); (top-gdb) Note that both captured_main and captured_main_1 resolved to the same address, 0x791339. That is necessary to trigger the issue in question. The gdb.base/inline-break.exp testcase currently does not exercise that, but the new test added by this commit does. That new test fails without the GDB fix and passes with the fix. No regressions on x86-64 GNU/Linux. While at it, the THIS_PC comparison in stopped_by_user_bp_inline_frame is basically a nop, so just remove it -- if a software or hardware breakpoint explains the stop, then it must be that it was installed at the current PC. gdb/ChangeLog: 2018-06-19 Pedro Alves <palves@redhat.com> * inline-frame.c (stopped_by_user_bp_inline_frame): Replace PC parameter with a block parameter. Compare location's block symbol with the frame's block instead of addresses. (skip_inline_frames): Pass the current block instead of the frame's address. Break out as soon as we determine the frame should not be skipped. gdb/testsuite/ChangeLog: 2018-06-19 Pedro Alves <palves@redhat.com> * gdb.opt/inline-break.c (func_inline_callee, func_inline_caller) (func_extern_caller): New. (main): Call func_extern_caller. * gdb.opt/inline-break.exp: Add tests for inline frame skipping logic change.
2018-06-19 17:30:13 +02:00
breakpoint for this inline function. */
if (stopped_by_user_bp_inline_frame (cur_block, stop_chain))
break;
skip_count++;
last_sym = BLOCK_FUNCTION (cur_block);
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
}
else
break;
}
out of line functions nested inside inline functions. This patch improves the handling of out-of-line functions nested inside functions that have been inlined. Consider for instance a situation where function Foo_O224_021 has a function Child1 declared in it, which itself has a function Child2 nested inside Child1. After compiling the program with optimization on, Child1 gets inlined, but not Child2. After inserting a breakpoint on Child2, and running the program until reaching that breakpoint, we get the following backtrace: % gdb foo_o224_021 (gdb) break foo_o224_021.child1.child2 (gdb) run [...] Breakpoint 1, foo_o224_021 () at foo_o224_021.adb:28 28 Child1; (gdb) bt #0 0x0000000000402400 in foo_o224_021 () at foo_o224_021.adb:28 #1 0x00000000004027a4 in foo_o224_021.child1 () at foo_o224_021.adb:23 #2 0x00000000004027a4 in foo_o224_021 () at foo_o224_021.adb:28 GDB reports the wrong function name for frame #0. We also get the same kind of error in the "Breakpoint 1, foo_o224_021 () [...]" message. In both cases, the function name should be foo_o224_021.child1.child2, and the parameters should be "s=...". What happens is that the inlined frame handling does not handle well the case where an inlined function is calling an out-of-line function which was declared inside the inlined function's scope. In particular, looking first at the inlined-frame sniffer when applying to frame #0: /* Calculate DEPTH, the number of inlined functions at this location. */ depth = 0; cur_block = frame_block; while (BLOCK_SUPERBLOCK (cur_block)) { if (block_inlined_p (cur_block)) depth++; cur_block = BLOCK_SUPERBLOCK (cur_block); } What happens is that cur_block starts as the block associated to child2, which is not inlined. We shoud be stopping here, but instead, we keep walking the superblock chain, which takes us all the way to Foo_O224_021's block, via Child2's block. And since Child1 was inlined, we end up with a depth count of 1, wrongly making GDB think that frame #0 is an inlined frame. Same kind of issue inside skip_inline_frames. The fix is to stop checking for inlined frames as soon as we see a block corresponding to a function which is not inlined. This is the behavior we now obtain: (gdb) run [...] Breakpoint 1, foo_o224_021.child1.child2 (s=...) at foo_o224_021.adb:9 9 function Child2 (S : String) return Boolean is (gdb) bt #0 0x0000000000402400 in foo_o224_021.child1.child2 (s=...) at foo_o224_021.adb:9 #1 0x00000000004027a4 in foo_o224_021.child1 () at foo_o224_021.adb:23 #2 0x00000000004027a4 in foo_o224_021 () at foo_o224_021.adb:28 gdb/ChangeLog: * inline-frame.c (inline_frame_sniffer, skip_inline_frames): Stop counting inlined frames as soon as an out-of-line function is found. gdb/testsuite/ChangeLog: * gdb.ada/out_of_line_in_inlined.exp: Add run and "bt" tests.
2015-04-21 19:34:04 +02:00
else if (BLOCK_FUNCTION (cur_block) != NULL)
break;
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
cur_block = BLOCK_SUPERBLOCK (cur_block);
}
}
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
gdb_assert (find_inline_frame_state (thread) == NULL);
inline_states.emplace_back (thread, skip_count, this_pc, last_sym);
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
if (skip_count != 0)
reinit_frame_cache ();
}
/* Step into an inlined function by unhiding it. */
void
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
step_into_inline_frame (thread_info *thread)
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
{
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
inline_state *state = find_inline_frame_state (thread);
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
gdb_assert (state != NULL && state->skipped_frames > 0);
state->skipped_frames--;
reinit_frame_cache ();
}
/* Return the number of hidden functions inlined into the current
frame. */
int
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
inline_skipped_frames (thread_info *thread)
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
{
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
inline_state *state = find_inline_frame_state (thread);
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
if (state == NULL)
return 0;
else
return state->skipped_frames;
}
/* If one or more inlined functions are hidden, return the symbol for
the function inlined into the current frame. */
struct symbol *
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
inline_skipped_symbol (thread_info *thread)
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
{
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
inline_state *state = find_inline_frame_state (thread);
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
gdb_assert (state != NULL);
return state->skipped_symbol;
}
/* Return the number of functions inlined into THIS_FRAME. Some of
the callees may not have associated frames (see
skip_inline_frames). */
int
frame_inlined_callees (struct frame_info *this_frame)
{
struct frame_info *next_frame;
int inline_count = 0;
/* First count how many inlined functions at this PC have frames
above FRAME (are inlined into FRAME). */
for (next_frame = get_next_frame (this_frame);
next_frame && get_frame_type (next_frame) == INLINE_FRAME;
next_frame = get_next_frame (next_frame))
inline_count++;
/* Simulate some most-inner inlined frames which were suppressed, so
they can be stepped into later. If we are unwinding already
outer frames from some non-inlined frame this does not apply. */
if (next_frame == NULL)
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
inline_count += inline_skipped_frames (inferior_thread ());
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
return inline_count;
}