OpenE2K/binutils-gdb
12
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
a8d0866480
binutils-gdb/gdb/maint.c

296 lines
8.9 KiB
C
Raw Normal View History

* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
/* Support for GDB maintenance commands.
* symmisc.c (maintenance_check_symtabs): New function to check consistency of psymtabs and symtabs. * symtab.h (maintenance_check_symtabs): Add prototype. * maint.c: Add new `maint check-symtabs' command.
1994-03-21 22:14:27 +01:00
Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc.
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
Written by Fred Fish at Cygnus Support.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#include "defs.h"
#if MAINTENANCE_CMDS /* Entire file goes away if not including maint cmds */
#include <signal.h>
#include "command.h"
#include "gdbcmd.h"
#include "symtab.h"
#include "gdbtypes.h"
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
#include "demangle.h"
* Makefile.in: Add i386lynx-tdep to the right places. (TARDIRS): Add gdbserver. * exec.c (print_section_info): Print entry point. * i386lynx-nat.c (i386lynx_saved_pc_after_call): Move into i386lynx-tdep.c. Add core file support. * i386lynx-tdep.c: New module for Lynx/386 target dependant code. * maint.c: Add `maint info sections' command to print info about all sections that BFD knows about for exec and core files. * sparc-tdep.c (sparc_push_dummy_frame): Update stack pointer before putting frame on the stack. Consolidate writes to reduce traffic for remote debugging. * config/i386/i386lynx.mh (NATDEPFILES): Remove exec.o. * config/i386/i386lynx.mt (TDEPFILES): Add exec.o, i386lynx-tdep.o. * config/i386/nm-i386lynx.h: Add target_pid_to_str(). * config/i386/tm-i386lynx.h: Remove target_pid_to_str(). * sparclite/Makefile.in: Add deps to keep Sun make happy.
1993-09-22 17:23:53 +02:00
#include "gdbcore.h"
* Makefile.in (c-exp.tab.o): Remove notice about shift/reduce conflicts which no longer occur. gcc -Wall lint: * findvar.c (symbol_read_needs_frame), corelow.c (ignore), inflow.c (gdb_has_a_terminal): Make sure to return a value. * regex.h: Declare re_set_syntax. * printcmd.c: Include valprint.h. * infcmd.c, exec.c, maint.c, core.c: Include language.h. * maint.c: Include expression.h. * infrun.c, fork-child.c, corelow.c, inflow.c: Include thread.h. * inftarg.c: Include command.h. * coredep.c: Include value.h. * c-exp.y, m2-exp.y, ch-exp.y: Include bfd.h, symfile.h and objfiles.h. * ch-typeprint.c: Include typeprint.h. * ch-valprint.c: Include c-lang.h. * nlmread.c: Include buildsym.h. * environ.c: Include gdbcore.h. Only include defs.h once. (set_in_environ): Cast const char * to char * when passing to set_gnutarget. Remove unused variables: * printcmd.c (printf_command): args_to_vprintf. * coffread.c (coff_symfile_init): strsection. Move variables to within the #ifdefs where they are used: * symtab.c (gdb_mangle_name): opname. * inftarg.c (child_attach): pid and exec_file. * inftarg.c (child_detach): siggnal. * objfiles.c (allocate_objfile): mapto, md, and fd. * objfiles.c (free_objfile): mmfd. * infrun.c (wait_for_inferior): Include BPSTAT_WHAT_LAST in switch. * infrun.c (wait_for_inferior): Remove unused same_pid label. * inferior.h: Declare set_sigint_trap and clear_sigint_trap. * parser-defs.h: Declare write_exp_elt_block. * stabsread.h: Declare elfstab_offset_sections and coffstab_build_psymtabs.
1993-10-21 21:41:50 +01:00
#include "expression.h" /* For language.h */
#include "language.h"
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
static void
maintenance_command PARAMS ((char *, int));
static void
maintenance_dump_me PARAMS ((char *, int));
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
static void
maintenance_demangle PARAMS ((char *, int));
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
/*
LOCAL FUNCTION
maintenance_command -- access the maintenance subcommands
SYNOPSIS
void maintenance_command (char *args, int from_tty)
DESCRIPTION
*/
static void
maintenance_command (args, from_tty)
char *args;
int from_tty;
{
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-01 23:25:23 +01:00
printf_unfiltered ("\"maintenance\" must be followed by the name of a maintenance command.\n");
help_list (maintenancelist, "maintenance ", -1, gdb_stdout);
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
}
/* ARGSUSED */
static void
maintenance_dump_me (args, from_tty)
char *args;
int from_tty;
{
if (query ("Should GDB dump core? "))
{
signal (SIGQUIT, SIG_DFL);
kill (getpid (), SIGQUIT);
}
}
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
/* Someday we should allow demangling for things other than just
explicit strings. For example, we might want to be able to
specify the address of a string in either GDB's process space
or the debuggee's process space, and have gdb fetch and demangle
that string. If we have a char* pointer "ptr" that points to
a string, we might want to be able to given just the name and
have GDB demangle and print what it points to, etc. (FIXME) */
static void
maintenance_demangle (args, from_tty)
char *args;
int from_tty;
{
char *demangled;
if (args == NULL || *args == '\0')
{
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-01 23:25:23 +01:00
printf_unfiltered ("\"maintenance demangle\" takes an argument to demangle.\n");
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
}
else
{
demangled = cplus_demangle (args, DMGL_ANSI | DMGL_PARAMS);
if (demangled != NULL)
{
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-01 23:25:23 +01:00
printf_unfiltered ("%s\n", demangled);
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
free (demangled);
}
else
{
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-01 23:25:23 +01:00
printf_unfiltered ("Can't demangle \"%s\"\n", args);
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
}
}
}
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
/* The "maintenance info" command is defined as a prefix, with allow_unknown 0.
Therefore, its own definition is called only for "maintenance info" with
no args. */
/* ARGSUSED */
static void
maintenance_info_command (arg, from_tty)
char *arg;
int from_tty;
{
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-01 23:25:23 +01:00
printf_unfiltered ("\"maintenance info\" must be followed by the name of an info command.\n");
help_list (maintenanceinfolist, "maintenance info ", -1, gdb_stdout);
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
}
* Makefile.in: Add i386lynx-tdep to the right places. (TARDIRS): Add gdbserver. * exec.c (print_section_info): Print entry point. * i386lynx-nat.c (i386lynx_saved_pc_after_call): Move into i386lynx-tdep.c. Add core file support. * i386lynx-tdep.c: New module for Lynx/386 target dependant code. * maint.c: Add `maint info sections' command to print info about all sections that BFD knows about for exec and core files. * sparc-tdep.c (sparc_push_dummy_frame): Update stack pointer before putting frame on the stack. Consolidate writes to reduce traffic for remote debugging. * config/i386/i386lynx.mh (NATDEPFILES): Remove exec.o. * config/i386/i386lynx.mt (TDEPFILES): Add exec.o, i386lynx-tdep.o. * config/i386/nm-i386lynx.h: Add target_pid_to_str(). * config/i386/tm-i386lynx.h: Remove target_pid_to_str(). * sparclite/Makefile.in: Add deps to keep Sun make happy.
1993-09-22 17:23:53 +02:00
static void
print_section_table (abfd, asect, ignore)
bfd *abfd;
asection *asect;
PTR ignore;
{
flagword flags;
flags = bfd_get_section_flags (abfd, asect);
Fix many sins which will come up in 32 bit x 64 bit GDB, and various miscellaneous things discovered in the process: * printcmd.c, defs.h (print_address_numeric): New function. * c-valprint.c (c_val_print), ch-valprint.c (chill_val_print) breakpoint.c (describe_other_breakpoints, breakpoint_1, mention), cp-valprint.c (cplus_print_value), infcmd.c (jump_command), printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c: Use it. * utils.c, defs.h (gdb_print_address): New function. * expprint (dump_expression), gdbtypes.h: Use it. * breakpoint.c (describe_other_breakpoints), symmisc.c (dump_symtab, print_symbol): Use filtered not unfiltered I/O. (remove_breakpoints): Remove BREAKPOINT_DEBUG code. Might as well just run gdb under a debugger for this (and it had problems with printing addresses, how to print b->shadow, etc.). * buildsym.c (make_blockvector), core.c (memory_error), exec.c (print_section_info), maint.c (print_section_table), mdebugread.c (parse_procedure), solib.c, source.c, symfile.c, symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c: Add comments saying code is broken. Marked with "FIXME-32x64". * dbxread.c (process_one_symbol), partial-stab.h (default), remote-vx.c (vx_run_files_info): Don't cast int being passed to local_hex_string. * symmisc.c (print_symbol): Don't cast long being passed to %lx. * symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE only being a long. * symmisc.c (print_symbol): Print "offset" in message for LOC_ARG and LOC_LOCAL. * printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE. * source.c: Include <sys/types.h> regardless of USG.
1994-01-27 01:36:05 +01:00
/* FIXME-32x64: Need print_address_numeric with field width. */
* Makefile.in: Add i386lynx-tdep to the right places. (TARDIRS): Add gdbserver. * exec.c (print_section_info): Print entry point. * i386lynx-nat.c (i386lynx_saved_pc_after_call): Move into i386lynx-tdep.c. Add core file support. * i386lynx-tdep.c: New module for Lynx/386 target dependant code. * maint.c: Add `maint info sections' command to print info about all sections that BFD knows about for exec and core files. * sparc-tdep.c (sparc_push_dummy_frame): Update stack pointer before putting frame on the stack. Consolidate writes to reduce traffic for remote debugging. * config/i386/i386lynx.mh (NATDEPFILES): Remove exec.o. * config/i386/i386lynx.mt (TDEPFILES): Add exec.o, i386lynx-tdep.o. * config/i386/nm-i386lynx.h: Add target_pid_to_str(). * config/i386/tm-i386lynx.h: Remove target_pid_to_str(). * sparclite/Makefile.in: Add deps to keep Sun make happy.
1993-09-22 17:23:53 +02:00
printf_filtered (" %s",
Tue Sep 28 09:45:38 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * symmisc.c (print_symbol): Use %02x not %2x for LOC_CONST_BYTES. Clean up problems with targets and hosts that have 64 bit longs and pointers and 32 bit ints. * breakpoint.c, buildsym.c, c-lang.c, c-valprint.c, ch-lang.c, ch-valprint.c, core.c, cp-valprint.c, dbxread.c, exec.c, expprint.c, gdbtypes.c, infcmd.c, language.c, language.h, m2-lang.c, maint.c, mips-tdep.c, mipsread.c, partial-stab.h, printcmd.c, remote-vx.c, solib.c, source.c, stack.c, symfile.c, symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c: Change all printf formats from %x to %lx if outputting an address. Change la_*_format to use long format. local_hex_string, local_hex_string_custom now take an unsigned long argument, change all callers. * coffread.c (read_coff_symtab): Remove superfluous cast for complaint output. * dbxread.c (end_psymtab): Cast MSYMBOL_INFO to long, not int. * findvar.c, value.h (write_register): Change register value to long. * gdbtypes.h (struct type): Change `bitsize' to long as TYPE_FIELD_STATIC_PHYSNAME uses this field as a pointer. * inferior.h (struct inferior_status): Change type of stop_pc to CORE_ADDR. * language.h (local_octal_string, local_octal_string_custom): Remove prototype, the functions are neither defined nor used. * mipsread.c (parse_symbol): Use temporary variable for bitsize as f->bitsize is a long now. * objfiles.c (add_to_objfile_sections, build_objfile_section_table): Use unsigned long casts instead of int for abusing sections_end pointer as integer. * stack.c (parse_frame_specification): Change type of `args' to CORE_ADDR for SETUP_ARBITRARY_FRAME. * printcmd.c (make_vasize): Allow redefinition via MAKEVA_SIZE. * mipsread.c (parse_type): Alpha cc now supports the t->continued bit, update algorithm to match the way the compiler uses it.
1993-09-28 18:43:25 +01:00
local_hex_string_custom
((unsigned long) bfd_section_vma (abfd, asect), "08l"));
* Makefile.in: Add i386lynx-tdep to the right places. (TARDIRS): Add gdbserver. * exec.c (print_section_info): Print entry point. * i386lynx-nat.c (i386lynx_saved_pc_after_call): Move into i386lynx-tdep.c. Add core file support. * i386lynx-tdep.c: New module for Lynx/386 target dependant code. * maint.c: Add `maint info sections' command to print info about all sections that BFD knows about for exec and core files. * sparc-tdep.c (sparc_push_dummy_frame): Update stack pointer before putting frame on the stack. Consolidate writes to reduce traffic for remote debugging. * config/i386/i386lynx.mh (NATDEPFILES): Remove exec.o. * config/i386/i386lynx.mt (TDEPFILES): Add exec.o, i386lynx-tdep.o. * config/i386/nm-i386lynx.h: Add target_pid_to_str(). * config/i386/tm-i386lynx.h: Remove target_pid_to_str(). * sparclite/Makefile.in: Add deps to keep Sun make happy.
1993-09-22 17:23:53 +02:00
printf_filtered ("->%s",
Tue Sep 28 09:45:38 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * symmisc.c (print_symbol): Use %02x not %2x for LOC_CONST_BYTES. Clean up problems with targets and hosts that have 64 bit longs and pointers and 32 bit ints. * breakpoint.c, buildsym.c, c-lang.c, c-valprint.c, ch-lang.c, ch-valprint.c, core.c, cp-valprint.c, dbxread.c, exec.c, expprint.c, gdbtypes.c, infcmd.c, language.c, language.h, m2-lang.c, maint.c, mips-tdep.c, mipsread.c, partial-stab.h, printcmd.c, remote-vx.c, solib.c, source.c, stack.c, symfile.c, symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c: Change all printf formats from %x to %lx if outputting an address. Change la_*_format to use long format. local_hex_string, local_hex_string_custom now take an unsigned long argument, change all callers. * coffread.c (read_coff_symtab): Remove superfluous cast for complaint output. * dbxread.c (end_psymtab): Cast MSYMBOL_INFO to long, not int. * findvar.c, value.h (write_register): Change register value to long. * gdbtypes.h (struct type): Change `bitsize' to long as TYPE_FIELD_STATIC_PHYSNAME uses this field as a pointer. * inferior.h (struct inferior_status): Change type of stop_pc to CORE_ADDR. * language.h (local_octal_string, local_octal_string_custom): Remove prototype, the functions are neither defined nor used. * mipsread.c (parse_symbol): Use temporary variable for bitsize as f->bitsize is a long now. * objfiles.c (add_to_objfile_sections, build_objfile_section_table): Use unsigned long casts instead of int for abusing sections_end pointer as integer. * stack.c (parse_frame_specification): Change type of `args' to CORE_ADDR for SETUP_ARBITRARY_FRAME. * printcmd.c (make_vasize): Allow redefinition via MAKEVA_SIZE. * mipsread.c (parse_type): Alpha cc now supports the t->continued bit, update algorithm to match the way the compiler uses it.
1993-09-28 18:43:25 +01:00
local_hex_string_custom
((unsigned long) (bfd_section_vma (abfd, asect)
+ bfd_section_size (abfd, asect)),
"08l"));
printf_filtered (" at %s",
local_hex_string_custom
((unsigned long) asect->filepos, "08l"));
* Makefile.in: Add i386lynx-tdep to the right places. (TARDIRS): Add gdbserver. * exec.c (print_section_info): Print entry point. * i386lynx-nat.c (i386lynx_saved_pc_after_call): Move into i386lynx-tdep.c. Add core file support. * i386lynx-tdep.c: New module for Lynx/386 target dependant code. * maint.c: Add `maint info sections' command to print info about all sections that BFD knows about for exec and core files. * sparc-tdep.c (sparc_push_dummy_frame): Update stack pointer before putting frame on the stack. Consolidate writes to reduce traffic for remote debugging. * config/i386/i386lynx.mh (NATDEPFILES): Remove exec.o. * config/i386/i386lynx.mt (TDEPFILES): Add exec.o, i386lynx-tdep.o. * config/i386/nm-i386lynx.h: Add target_pid_to_str(). * config/i386/tm-i386lynx.h: Remove target_pid_to_str(). * sparclite/Makefile.in: Add deps to keep Sun make happy.
1993-09-22 17:23:53 +02:00
printf_filtered (": %s", bfd_section_name (abfd, asect));
if (flags & SEC_ALLOC)
printf_filtered (" ALLOC");
if (flags & SEC_LOAD)
printf_filtered (" LOAD");
if (flags & SEC_RELOC)
printf_filtered (" RELOC");
if (flags & SEC_READONLY)
printf_filtered (" READONLY");
if (flags & SEC_CODE)
printf_filtered (" CODE");
if (flags & SEC_DATA)
printf_filtered (" DATA");
if (flags & SEC_ROM)
printf_filtered (" ROM");
if (flags & SEC_CONSTRUCTOR)
printf_filtered (" CONSTRUCTOR");
if (flags & SEC_HAS_CONTENTS)
printf_filtered (" HAS_CONTENTS");
if (flags & SEC_NEVER_LOAD)
printf_filtered (" NEVER_LOAD");
* maint.c (print_section_table): Rename SEC_SHARED_LIBRARY to SEC_COFF_SHARED_LIBRARY to match corresponding change in bfd.
1994-05-10 20:43:51 +02:00
if (flags & SEC_COFF_SHARED_LIBRARY)
printf_filtered (" COFF_SHARED_LIBRARY");
* Makefile.in: Add i386lynx-tdep to the right places. (TARDIRS): Add gdbserver. * exec.c (print_section_info): Print entry point. * i386lynx-nat.c (i386lynx_saved_pc_after_call): Move into i386lynx-tdep.c. Add core file support. * i386lynx-tdep.c: New module for Lynx/386 target dependant code. * maint.c: Add `maint info sections' command to print info about all sections that BFD knows about for exec and core files. * sparc-tdep.c (sparc_push_dummy_frame): Update stack pointer before putting frame on the stack. Consolidate writes to reduce traffic for remote debugging. * config/i386/i386lynx.mh (NATDEPFILES): Remove exec.o. * config/i386/i386lynx.mt (TDEPFILES): Add exec.o, i386lynx-tdep.o. * config/i386/nm-i386lynx.h: Add target_pid_to_str(). * config/i386/tm-i386lynx.h: Remove target_pid_to_str(). * sparclite/Makefile.in: Add deps to keep Sun make happy.
1993-09-22 17:23:53 +02:00
if (flags & SEC_IS_COMMON)
printf_filtered (" IS_COMMON");
printf_filtered ("\n");
}
/* ARGSUSED */
static void
maintenance_info_sections (arg, from_tty)
char *arg;
int from_tty;
{
if (exec_bfd)
{
printf_filtered ("Exec file:\n");
printf_filtered (" `%s', ", bfd_get_filename(exec_bfd));
wrap_here (" ");
printf_filtered ("file type %s.\n", bfd_get_target(exec_bfd));
bfd_map_over_sections(exec_bfd, print_section_table, 0);
}
if (core_bfd)
{
printf_filtered ("Core file:\n");
printf_filtered (" `%s', ", bfd_get_filename(core_bfd));
wrap_here (" ");
printf_filtered ("file type %s.\n", bfd_get_target(core_bfd));
bfd_map_over_sections(core_bfd, print_section_table, 0);
}
}
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
/* The "maintenance print" command is defined as a prefix, with allow_unknown
0. Therefore, its own definition is called only for "maintenance print"
with no args. */
/* ARGSUSED */
static void
maintenance_print_command (arg, from_tty)
char *arg;
int from_tty;
{
Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.
1993-11-01 23:25:23 +01:00
printf_unfiltered ("\"maintenance print\" must be followed by the name of a print command.\n");
help_list (maintenanceprintlist, "maintenance print ", -1, gdb_stdout);
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
}
* Makefile.in (init.c): Generate using the source, not munch. This cleans up all kinds of hassles (which nm to use in munch, etc). The new formatting conventions (mostly already followed) are that the name of the _initialize_* routines must start in column zero, and must not be inside #if. * munch: Removed. * Makefile.in: Remove references to munch. * serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c, alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c, procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c, i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c, z8k-tdep.c: Make sure the above conventions are followed. Make sure they are all declared as returning void. Clean up miscellaneous comments and such.
1993-10-22 06:55:58 +01:00
#endif /* MAINTENANCE_CMDS */
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
void
_initialize_maint_cmds ()
{
* Makefile.in (init.c): Generate using the source, not munch. This cleans up all kinds of hassles (which nm to use in munch, etc). The new formatting conventions (mostly already followed) are that the name of the _initialize_* routines must start in column zero, and must not be inside #if. * munch: Removed. * Makefile.in: Remove references to munch. * serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c, alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c, procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c, i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c, z8k-tdep.c: Make sure the above conventions are followed. Make sure they are all declared as returning void. Clean up miscellaneous comments and such.
1993-10-22 06:55:58 +01:00
#if MAINTENANCE_CMDS /* Entire file goes away if not including maint cmds */
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
add_prefix_cmd ("maintenance", class_maintenance, maintenance_command,
"Commands for use by GDB maintainers.\n\
Includes commands to dump specific internal GDB structures in\n\
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
a human readable form, to cause GDB to deliberately dump core,\n\
to test internal functions such as the C++ demangler, etc.",
* maint.c (maintenance_command, maintenance_info_command): Install with allow_unknown as 0 and call help_list to show list of possibilities when no subcommand is specified.
1992-07-07 18:00:30 +02:00
&maintenancelist, "maintenance ", 0,
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
&cmdlist);
* Makefile.in (VERSION): Roll to 4.6.8. (OBS): Put version.o first, so Makefile rebuild happens early. * command.h: Publicize prototype for not_just_help_class_command. * command.c: Remove proto. * maint.c: Mark "mt" as an abbrev, to avoid duplicated help output. Move "maint info" from class info to class maintenance, and improve text. * infrun.c: Move "stop" to class_obscure, and give it a function so it will not be seen as a global help topic. FIXME, it should be possible to set these attributes independently. * core.c (core_command): Make nicer error message for no core support.
1992-10-15 14:42:10 +01:00
add_com_alias ("mt", "maintenance", class_maintenance, 1);
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
* Makefile.in (VERSION): Roll to 4.6.8. (OBS): Put version.o first, so Makefile rebuild happens early. * command.h: Publicize prototype for not_just_help_class_command. * command.c: Remove proto. * maint.c: Mark "mt" as an abbrev, to avoid duplicated help output. Move "maint info" from class info to class maintenance, and improve text. * infrun.c: Move "stop" to class_obscure, and give it a function so it will not be seen as a global help topic. FIXME, it should be possible to set these attributes independently. * core.c (core_command): Make nicer error message for no core support.
1992-10-15 14:42:10 +01:00
add_prefix_cmd ("info", class_maintenance, maintenance_info_command,
"Commands for showing internal info about the program being debugged.",
* maint.c (maintenance_command, maintenance_info_command): Install with allow_unknown as 0 and call help_list to show list of possibilities when no subcommand is specified.
1992-07-07 18:00:30 +02:00
&maintenanceinfolist, "maintenance info ", 0,
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
&maintenancelist);
* Makefile.in: Add i386lynx-tdep to the right places. (TARDIRS): Add gdbserver. * exec.c (print_section_info): Print entry point. * i386lynx-nat.c (i386lynx_saved_pc_after_call): Move into i386lynx-tdep.c. Add core file support. * i386lynx-tdep.c: New module for Lynx/386 target dependant code. * maint.c: Add `maint info sections' command to print info about all sections that BFD knows about for exec and core files. * sparc-tdep.c (sparc_push_dummy_frame): Update stack pointer before putting frame on the stack. Consolidate writes to reduce traffic for remote debugging. * config/i386/i386lynx.mh (NATDEPFILES): Remove exec.o. * config/i386/i386lynx.mt (TDEPFILES): Add exec.o, i386lynx-tdep.o. * config/i386/nm-i386lynx.h: Add target_pid_to_str(). * config/i386/tm-i386lynx.h: Remove target_pid_to_str(). * sparclite/Makefile.in: Add deps to keep Sun make happy.
1993-09-22 17:23:53 +02:00
add_cmd ("sections", class_maintenance, maintenance_info_sections,
"List the BFD sections of the exec and core files.",
&maintenanceinfolist);
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
add_prefix_cmd ("print", class_maintenance, maintenance_print_command,
"Maintenance command for printing GDB internal state.",
&maintenanceprintlist, "maintenance print ", 0,
&maintenancelist);
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
add_cmd ("dump-me", class_maintenance, maintenance_dump_me,
"Get fatal error; make debugger dump its core.\n\
GDB sets it's handling of SIGQUIT back to SIG_DFL and then sends\n\
itself a SIGQUIT signal.",
&maintenancelist);
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
add_cmd ("demangle", class_maintenance, maintenance_demangle,
"Demangle a C++ mangled name.\n\
Call internal GDB demangler routine to demangle a C++ link name\n\
and prints the result.",
&maintenancelist);
add_cmd ("type", class_maintenance, maintenance_print_type,
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
"Print a type chain for a given symbol.\n\
For each node in a type chain, print the raw data for each member of\n\
the type structure, and the interpretation of the data.",
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
&maintenanceprintlist);
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
add_cmd ("symbols", class_maintenance, maintenance_print_symbols,
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
"Print dump of current symbol definitions.\n\
Entries in the full symbol table are dumped to file OUTFILE.\n\
If a SOURCE file is specified, dump only that file's symbols.",
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
&maintenanceprintlist);
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
add_cmd ("msymbols", class_maintenance, maintenance_print_msymbols,
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
"Print dump of current minimal symbol definitions.\n\
Entries in the minimal symbol table are dumped to file OUTFILE.\n\
If a SOURCE file is specified, dump only that file's minimal symbols.",
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
&maintenanceprintlist);
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
add_cmd ("psymbols", class_maintenance, maintenance_print_psymbols,
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
"Print dump of current partial symbol definitions.\n\
Entries in the partial symbol table are dumped to file OUTFILE.\n\
If a SOURCE file is specified, dump only that file's partial symbols.",
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
&maintenanceprintlist);
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
add_cmd ("objfiles", class_maintenance, maintenance_print_objfiles,
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
"Print dump of current object file definitions.",
* command.c (lookup_cmd_1): Clarify descriptive comments. * gdbcmd.h (maintenanceprintlist): Add declaration. * main.c (maintenanceprintlist): Add definition. * main.c (gdb_completer_command_word_break_characters): Add. * main.c (symbol_completion_function): Switch completer word break character sets dynamically, based on whether completion is being done on commands or on something else. * main.c (initialize_cmd_lists): Init maintenanceprintlist. * maint.c: Include demangle.h. * maint.c (maintenance_demangle): New function. * maint.c (maintenance_print_command): New function. * maint.c (_initialize_maint_cmds): Reorganize some commands under new maintenance print subcommand.
1992-07-10 19:22:35 +02:00
&maintenanceprintlist);
* symmisc.c (maintenance_check_symtabs): New function to check consistency of psymtabs and symtabs. * symtab.h (maintenance_check_symtabs): Add prototype. * maint.c: Add new `maint check-symtabs' command.
1994-03-21 22:14:27 +01:00
add_cmd ("check-symtabs", class_maintenance, maintenance_check_symtabs,
"Check consistency of psymtabs and symtabs.",
&maintenancelist);
* maint.c: New file. * Makefile.in (SFILES_MAINDIR): Add new file maint.c. * Makefile.in (OBS): Add new file maint.o. * defs.h (command_class): Add class_maintenance. * defs.h (MAINTENANCE_CMDS): Default to including maintenance commands. Allow for them (and other nonessential parts of gdb) to be selectively left out under special circumstances. * gdbtypes.c (recursive_dump_type): New function; supports maintenance print-type command. * gdbtypes.h (recursive_dump_type, maintenance_print_type): Add prototypes. * main.c (maintenancelist, maintenanceinfolist): Add maintenance command lists. * main.c (initialize_cmd_lists): Eliminate unnecessary casts on initializers. Add initializations for setprintlist, showprintlist, setchecklist, showchecklist, maintenancelist, and maintenanceinfolist. * printcmd.c (maintenance_print_type): New maintenance cmd. * valprint.c (setprintlist, showprintlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * infcmd.c (unsetlist): Move to main.c, as implied by comment that all cmd lists are owned by main.c. * language.c (setchecklist, showchecklist): Move to main.c, as implied by comment that all cmd lists are owned by main.c * breakpoint.c (enablelist, enablebreaklist, disablelist, cmdlist, deletelist): Remove redundant declarations (also in gdbcmd.h). * symmisc.c (printsyms_command): Now maintenance_print_symbols. * symmisc.c (printmsyms_command): Now maintenance_print_msymbols. * symmisc.c (printpsyms_command): Now maintenance_print_psymbols. * symmisc.c (printobjfiles_command): Now maintenance_print_objfiles. * symtab.h (maintenance_print_symbols, maintenance_print_psymbols, maintenance_print_msymbols, maintenance_print_objfiles): Add prototypes. * symmisc.c (printsyms_command, printpsyms_command, printmsyms_command, printobjfiles_command): Removed from _initialize_symmisc. * main.c (dump_me_command): Moved to maint.c and renamed to maintenance_dump_me. * breakpoint.c (all_breakpoints_info): Rename to maintenance_info_breakpoints. * breakpoint.c (_initialize_breakpoint): Convert add_info of all_breakpoints_info to add maintenance_info_breakpoints to the maintenanceinfolist instead. main.c (initialize_main): Set up maintenance class commands.
1992-07-06 02:22:57 +02:00
#endif /* MAINTENANCE_CMDS */
* Makefile.in (init.c): Generate using the source, not munch. This cleans up all kinds of hassles (which nm to use in munch, etc). The new formatting conventions (mostly already followed) are that the name of the _initialize_* routines must start in column zero, and must not be inside #if. * munch: Removed. * Makefile.in: Remove references to munch. * serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c, alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c, procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c, i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c, z8k-tdep.c: Make sure the above conventions are followed. Make sure they are all declared as returning void. Clean up miscellaneous comments and such.
1993-10-22 06:55:58 +01:00
}
Reference in New Issue Copy Permalink