OpenE2K
/
binutils-gdb
12
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
binutils-gdb/gdb/tm-sun386.h

306 lines
9.8 KiB
C
Raw Normal View History

Johns release
1991-03-28 17:28:29 +01:00
/* Parameters for execution on a Sun 386i, for GDB, the GNU debugger.
Copyright (C) 1986, 1987 Free Software Foundation, Inc.
This file is part of GDB.
GDB is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 1, or (at your option)
any later version.
GDB is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GDB; see the file COPYING. If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
#define TARGET_BYTE_ORDER LITTLE_ENDIAN
#ifndef sun386
#define sun386
#endif
#define SUNOS4
#define USE_MACHINE_REG_H
/* Perhaps some day this will work even without the following #define */
#define COFF_ENCAPSULATE
#ifdef COFF_ENCAPSULATE
#define NAMES_HAVE_UNDERSCORE
/* Avoid conflicts between "a.out.gnu.h" and <sys/exec.h> */
#define _EXEC_
#endif
#define BROKEN_LARGE_ALLOCA
/* sun386 ptrace seems unable to change the frame pointer */
#define PTRACE_FP_BUG
/* Debugger information will be in DBX format. */
#define READ_DBX_FORMAT
/* Offset from address of function to start of its code.
Zero on most machines. */
#define FUNCTION_START_OFFSET 0
/* Advance PC across any function entry prologue instructions
to reach some "real" code. */
#define SKIP_PROLOGUE(frompc) {(frompc) = i386_skip_prologue((frompc));}
/* Immediately after a function call, return the saved pc.
Can't always go through the frames for this because on some machines
the new frame is not set up until the new function executes
some instructions. */
#define SAVED_PC_AFTER_CALL(frame) \
(read_memory_integer (read_register (SP_REGNUM), 4))
/* Address of end of stack space. */
#define STACK_END_ADDR 0xfc000000
/* Stack grows downward. */
#define INNER_THAN <
/* Sequence of bytes for breakpoint instruction. */
#define BREAKPOINT {0xcc}
/* Amount PC must be decremented by after a breakpoint.
This is often the number of bytes in BREAKPOINT
but not always. */
#define DECR_PC_AFTER_BREAK 1
/* Nonzero if instruction at PC is a return instruction. */
#define ABOUT_TO_RETURN(pc) (read_memory_integer (pc, 1) == 0xc3)
/* Return 1 if P points to an invalid floating point value.
LEN is the length in bytes -- not relevant on the 386. */
#define INVALID_FLOAT(p, len) (0)
/* Largest integer type */
#define LONGEST long
/* Name of the builtin type for the LONGEST type above. */
#define BUILTIN_TYPE_LONGEST builtin_type_long
/* Say how long (ordinary) registers are. */
#define REGISTER_TYPE long
/* Number of machine registers */
#define NUM_REGS 35
/* Initializer for an array of names of registers.
There should be NUM_REGS strings in this initializer. */
/* the order of the first 8 registers must match the compiler's
* numbering scheme (which is the same as the 386 scheme)
* also, this table must match regmap in i386-pinsn.c.
*/
#define REGISTER_NAMES { "gs", "fs", "es", "ds", \
"edi", "esi", "ebp", "esp", \
"ebx", "edx", "ecx", "eax", \
"retaddr", "trapnum", "errcode", "ip", \
"cs", "ps", "sp", "ss", \
"fst0", "fst1", "fst2", "fst3", \
"fst4", "fst5", "fst6", "fst7", \
"fctrl", "fstat", "ftag", "fip", \
"fcs", "fopoff", "fopsel" \
}
/* Register numbers of various important registers.
Note that some of these values are "real" register numbers,
and correspond to the general registers of the machine,
and some are "phony" register numbers which are too large
to be actual register numbers as far as the user is concerned
but do serve to get the desired values when passed to read_register. */
#define FP_REGNUM 6 /* Contains address of executing stack frame */
#define SP_REGNUM 18 /* Contains address of top of stack */
#define PS_REGNUM 17 /* Contains processor status */
#define PC_REGNUM 15 /* Contains program counter */
#define FP0_REGNUM 20 /* Floating point register 0 */
#define FPC_REGNUM 28 /* 80387 control register */
/* Total amount of space needed to store our copies of the machine's
register state, the array `registers'. */
#define REGISTER_BYTES (20*4+8*10+7*4)
/* Index within `registers' of the first byte of the space for
register N. */
#define REGISTER_BYTE(N) \
((N) >= FPC_REGNUM ? (((N) - FPC_REGNUM) * 4) + 160 \
: (N) >= FP0_REGNUM ? (((N) - FP0_REGNUM) * 10) + 80 \
: (N) * 4)
/* Number of bytes of storage in the actual machine representation
for register N. */
#define REGISTER_RAW_SIZE(N) (((unsigned)((N) - FP0_REGNUM)) < 8 ? 10 : 4)
/* Number of bytes of storage in the program's representation
for register N. */
#define REGISTER_VIRTUAL_SIZE(N) (((unsigned)((N) - FP0_REGNUM)) < 8 ? 8 : 4)
/* Largest value REGISTER_RAW_SIZE can have. */
#define MAX_REGISTER_RAW_SIZE 10
/* Largest value REGISTER_VIRTUAL_SIZE can have. */
#define MAX_REGISTER_VIRTUAL_SIZE 8
/* Nonzero if register N requires conversion
from raw format to virtual format. */
#define REGISTER_CONVERTIBLE(N) (((unsigned)((N) - FP0_REGNUM)) < 8)
/* Convert data from raw format for register REGNUM
to virtual format for register REGNUM. */
#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) \
{ if ((REGNUM) >= FP0_REGNUM && (REGNUM) < FPC_REGNUM) \
i387_to_double ((FROM), (TO)); \
else \
bcopy ((FROM), (TO), 4); }
/* Convert data from virtual format for register REGNUM
to raw format for register REGNUM. */
#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO) \
{ if ((REGNUM) >= FP0_REGNUM && (REGNUM) < FPC_REGNUM) \
double_to_i387 ((FROM), (TO)); \
else \
bcopy ((FROM), (TO), 4); }
/* Return the GDB type object for the "standard" data type
of data in register N. */
#define REGISTER_VIRTUAL_TYPE(N) \
(((unsigned)((N) - FP0_REGNUM)) < 8 ? builtin_type_double : builtin_type_int)
/* Store the address of the place in which to copy the structure the
subroutine will return. This is called from call_function. */
#define STORE_STRUCT_RETURN(ADDR, SP) \
{ (SP) -= sizeof (ADDR); \
write_memory ((SP), &(ADDR), sizeof (ADDR)); }
/* Extract from an array REGBUF containing the (raw) register state
a function return value of type TYPE, and copy that, in virtual format,
into VALBUF. */
#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
bcopy (REGBUF + REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 11), VALBUF, TYPE_LENGTH (TYPE))
/* Write into appropriate registers a function return value
of type TYPE, given in virtual format. */
#define STORE_RETURN_VALUE(TYPE,VALBUF) \
write_register_bytes (REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 11), VALBUF, TYPE_LENGTH (TYPE))
/* Extract from an array REGBUF containing the (raw) register state
the address in which a function should return its structure value,
as a CORE_ADDR (or an expression that can be used as one). */
#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF))
/* Describe the pointer in each stack frame to the previous stack frame
(its caller). */
/* FRAME_CHAIN takes a frame's nominal address
and produces the frame's chain-pointer.
FRAME_CHAIN_COMBINE takes the chain pointer and the frame's nominal address
and produces the nominal address of the caller frame.
However, if FRAME_CHAIN_VALID returns zero,
it means the given frame is the outermost one and has no caller.
In that case, FRAME_CHAIN_COMBINE is not used. */
#define FRAME_CHAIN(thisframe) \
(outside_startup_file ((thisframe)->pc) ? \
read_memory_integer ((thisframe)->frame, 4) :\
0)
#define FRAME_CHAIN_VALID(chain, thisframe) \
(chain != 0 && (outside_startup_file (FRAME_SAVED_PC (thisframe))))
#define FRAME_CHAIN_COMBINE(chain, thisframe) (chain)
/* Define other aspects of the stack frame. */
/* A macro that tells us whether the function invocation represented
by FI does not have a frame on the stack associated with it. If it
does not, FRAMELESS is set to 1, else 0. */
#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
{ (FRAMELESS) = frameless_look_for_prologue (FI); }
#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 4, 4))
#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
/* Return number of args passed to a frame.
Can return -1, meaning no way to tell. */
#define FRAME_NUM_ARGS(numargs, fi) (numargs) = i386_frame_num_args(fi)
/* Return number of bytes at start of arglist that are not really args. */
#define FRAME_ARGS_SKIP 8
/* Put here the code to store, into a struct frame_saved_regs,
the addresses of the saved registers of frame described by FRAME_INFO.
This includes special registers such as pc and fp saved in special
ways in the stack frame. sp is even more special:
the address we return for it IS the sp for the next frame. */
#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
{ i386_frame_find_saved_regs ((frame_info), &(frame_saved_regs)); }
/* Things needed for making the inferior call functions. */
/* Push an empty stack frame, to record the current PC, etc. */
#define PUSH_DUMMY_FRAME { i386_push_dummy_frame (); }
/* Discard from the stack the innermost frame, restoring all registers. */
#define POP_FRAME { i386_pop_frame (); }
/* this is
* call 11223344 (32 bit relative)
* int3
*/
#define CALL_DUMMY { 0x223344e8, 0xcc11 }
#define CALL_DUMMY_LENGTH 8
#define CALL_DUMMY_START_OFFSET 0 /* Start execution at beginning of dummy */
/* Insert the specified number of args and function address
into a call sequence of the above form stored at DUMMYNAME. */
#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
{ \
*(int *)((char *)(dummyname) + 1) = (int)(fun) - (pc) - 5; \
}