binutils-gdb/gdbserver/proc-service.cc

166 lines
4.3 KiB
C++
Raw Normal View History

2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
/* libthread_db helper functions for the remote server for GDB.
Copyright (C) 2002-2020 Free Software Foundation, Inc.
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
Contributed by MontaVista Software.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
#include "server.h"
/* This file is currently tied to GNU/Linux. It should scale well to
[gdb] Fix more typos in comments (2) Fix typos in comments. NFC. Tested on x86_64-linux. gdb/ChangeLog: 2019-10-26 Tom de Vries <tdevries@suse.de> * aarch64-linux-tdep.c: Fix typos in comments. * aarch64-tdep.c: Same. * ada-lang.c: Same. * amd64-nat.c: Same. * arc-tdep.c: Same. * arch/aarch64-insn.c: Same. * block.c: Same. * breakpoint.h: Same. * btrace.h: Same. * c-varobj.c: Same. * cli/cli-decode.c: Same. * cli/cli-script.c: Same. * cli/cli-utils.h: Same. * coff-pe-read.c: Same. * coffread.c: Same. * compile/compile-cplus-symbols.c: Same. * compile/compile-object-run.c: Same. * completer.c: Same. * corelow.c: Same. * cp-support.c: Same. * demangle.c: Same. * dwarf-index-write.c: Same. * dwarf2-frame.c: Same. * dwarf2-frame.h: Same. * eval.c: Same. * frame-base.h: Same. * frame.h: Same. * gdbcmd.h: Same. * gdbtypes.h: Same. * gnu-nat.c: Same. * guile/scm-objfile.c: Same. * i386-tdep.c: Same. * i386-tdep.h: Same. * infcall.c: Same. * infcall.h: Same. * linux-nat.c: Same. * m68k-tdep.c: Same. * macroexp.c: Same. * memattr.c: Same. * mi/mi-cmd-disas.c: Same. * mi/mi-getopt.h: Same. * mi/mi-main.c: Same. * minsyms.c: Same. * nat/aarch64-sve-linux-sigcontext.h: Same. * objfiles.h: Same. * ppc-linux-nat.c: Same. * ppc-linux-tdep.c: Same. * ppc-tdep.h: Same. * progspace.h: Same. * prologue-value.h: Same. * python/py-evtregistry.c: Same. * python/py-instruction.h: Same. * record-btrace.c: Same. * record-full.c: Same. * remote.c: Same. * rs6000-tdep.c: Same. * ser-tcp.c: Same. * sol-thread.c: Same. * sparc-sol2-tdep.c: Same. * sparc64-tdep.c: Same. * stabsread.c: Same. * symfile.c: Same. * symtab.h: Same. * target.c: Same. * tracepoint.c: Same. * tui/tui-data.h: Same. * tui/tui-io.c: Same. * tui/tui-win.c: Same. * tui/tui.c: Same. * unittests/rsp-low-selftests.c: Same. * user-regs.h: Same. * utils.c: Same. * utils.h: Same. * valarith.c: Same. * valops.c: Same. * valprint.c: Same. * valprint.h: Same. * value.c: Same. * value.h: Same. * varobj.c: Same. * x86-nat.h: Same. * xtensa-tdep.c: Same. gdb/gdbserver/ChangeLog: 2019-10-26 Tom de Vries <tdevries@suse.de> * linux-aarch64-low.c: Fix typos in comments. * linux-arm-low.c: Same. * linux-low.c: Same. * linux-ppc-low.c: Same. * proc-service.c: Same. * regcache.h: Same. * server.c: Same. * tracepoint.c: Same. * win32-low.c: Same. gdb/stubs/ChangeLog: 2019-10-26 Tom de Vries <tdevries@suse.de> * ia64vms-stub.c: Fix typos in comments. * m32r-stub.c: Same. * m68k-stub.c: Same. * sh-stub.c: Same. gdb/testsuite/ChangeLog: 2019-10-26 Tom de Vries <tdevries@suse.de> * gdb.base/bigcore.c: Fix typos in comments. * gdb.base/ctf-ptype.c: Same. * gdb.base/long_long.c: Same. * gdb.dwarf2/dw2-op-out-param.S: Same. * gdb.python/py-evthreads.c: Same. * gdb.reverse/i387-stack-reverse.c: Same. * gdb.trace/tfile.c: Same. * lib/compiler.c: Same. * lib/compiler.cc: Same. Change-Id: I8573d84a577894270179ae30f46c48d806fc1beb
2019-10-26 09:55:32 +02:00
another libthread_db implementation, with the appropriate gdbserver
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
hooks, but for now this means we can use GNU/Linux's target data. */
#include "linux-low.h"
#include "gdb_proc_service.h"
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
typedef struct ps_prochandle *gdb_ps_prochandle_t;
typedef void *gdb_ps_read_buf_t;
typedef const void *gdb_ps_write_buf_t;
typedef size_t gdb_ps_size_t;
#ifdef HAVE_LINUX_REGSETS
#define HAVE_REGSETS
#endif
#ifdef HAVE_REGSETS
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
static struct regset_info *
[GDBserver] Multi-process + multi-arch This patch makes GDBserver support multi-process + biarch. Currently, if you're debugging more than one process at once with a single gdbserver (in extended-remote mode), then all processes must have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you see this: Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] Reading symbols from /home/pedro/gdb/tests/main32...done. Temporary breakpoint 2 at 0x4004cf: main. (2 locations) Starting program: /home/pedro/gdb/tests/main32 warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64 warning: Architecture rejected target-supplied description Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... etc, etc ... Even though the process was running a 32-bit program, GDBserver sent back to GDB a register set in 64-bit layout. A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a while ago made GDB track a target_gdbarch per inferior, and as consequence, fetch a target description per-inferior. This patch is the GDBserver counterpart, that makes GDBserver keep track of each process'es XML target description and register layout. So in the example above, GDBserver will send the correct register set in 32-bit layout to GDB. A new "struct target_desc" object (tdesc for short) is added, that holds the target description and register layout information about each process. Each `struct process_info' holds a pointer to a target description. The regcache also gains a pointer to a target description, mainly for convenience, and parallel with GDB (and possible future support for programs that flip processor modes). The low target's arch_setup routines are responsible for setting the process'es correct tdesc. This isn't that much different to how things were done before, except that instead of detecting the inferior process'es architecture and calling the corresponding init_registers_FOO routine, which would change the regcache layout globals and recreate the threads' regcaches, the regcache.c globals are gone, and the init_registers_$BAR routines now each initialize a separate global struct target_desc object (one for each arch variant GDBserver supports), and so all the init_registers_$BAR routines that are built into GDBserver are called early at GDBserver startup time (similarly to how GDB handles its built-in target descriptions), and then the arch_setup routine is responsible for making process_info->tdesc point to one of these target description globals. The regcache module is all parameterized to get the regcache's layout from the tdesc object instead of the old register_bytes, etc. globals. The threads' regcaches are now created lazily. The old scheme where we created each of them when we added a new thread doesn't work anymore, because we add the main thread/lwp before we see it stop for the first time, and it is only when we see the thread stop for the first time that we have a chance of determining the inferior's architecture (through the_low_target.arch_setup). Therefore when we add the main thread we don't know which architecture/tdesc its regcache should have. This patch makes the gdb.multi/multi-arch.exp test now pass against (extended-remote) GDBserver. It currently fails, without this patch. The IPA also uses the regcache, so it gains a new global struct target_desc pointer, which points at the description of the process it is loaded in. Re. the linux-low.c & friends changes. Since the register map etc. may differ between processes (64-bit vs 32-bit) etc., the linux_target_ops num_regs, regmap and regset_bitmap data fields are no longer sufficient. A new method is added in their place that returns a pointer to a new struct that includes all info linux-low.c needs to access registers of the current inferior. The patch/discussion that originally introduced linux-low.c:disabled_regsets mentions that the disabled_regsets set may be different per mode (in a biarch setup), and indeed that is cleared whenever we start a new (first) inferior, so that global is moved as well behind the new `struct regs_info'. On the x86 side: I simply replaced the i387-fp.c:num_xmm_registers global with a check for 64-bit or 32-bit process, which is equivalent to how the global was set. This avoided coming up with some more general mechanism that would work for all targets that use this module (GNU/Linux, Windows, etc.). Tested: GNU/Linux IA64 GNU/Linux MIPS64 GNU/Linux PowerPC (Fedora 16) GNU/Linux s390x (Fedora 16) GNU/Linux sparc64 (Debian) GNU/Linux x86_64, -m64 and -m32 (Fedora 17) Cross built, and smoke tested: i686-w64-mingw32, under Wine. GNU/Linux TI C6x, by Yao Qi. Cross built but otherwise not tested: aarch64-linux-gnu arm-linux-gnu m68k-linux nios2-linux-gnu sh-linux-gnu spu tilegx-unknown-linux-gnu Completely untested: GNU/Linux Blackfin GNU/Linux CRIS GNU/Linux CRISv32 GNU/Linux TI Xtensa GNU/Linux M32R LynxOS QNX NTO gdb/gdbserver/ 2013-06-07 Pedro Alves <palves@redhat.com> * Makefile.in (OBS): Add tdesc.o. (IPA_OBJS): Add tdesc-ipa.o. (tdesc-ipa.o): New rule. * ax.c (gdb_eval_agent_expr): Adjust register_size call to new interface. * linux-low.c (new_inferior): Delete. (disabled_regsets, num_regsets): Delete. (linux_add_process): Adjust to set the new per-process new_inferior flag. (linux_detach_one_lwp): Adjust to call regcache_invalidate_thread. (linux_wait_for_lwp): Adjust. Only call arch_setup if the event was a stop. When calling arch_setup, switch the current inferior to the thread that got an event. (linux_resume_one_lwp): Adjust to call regcache_invalidate_thread. (regsets_fetch_inferior_registers) (regsets_store_inferior_registers): New regsets_info parameter. Adjust to use it. (linux_register_in_regsets): New regs_info parameter. Adjust to use it. (register_addr, fetch_register, store_register): New usrregs_info parameter. Adjust to use it. (usr_fetch_inferior_registers, usr_store_inferior_registers): New parameter regs_info. Adjust to use it. (linux_fetch_registers): Get the current inferior's regs_info, and adjust to use it. (linux_store_registers): Ditto. [HAVE_LINUX_REGSETS] (initialize_regsets_info): New. (initialize_low): Don't initialize the target_regsets here. Call initialize_low_arch. * linux-low.h (target_regsets): Delete declaration. (struct regsets_info): New. (struct usrregs_info): New. (struct regs_info): New. (struct process_info_private) <new_inferior>: New field. (struct linux_target_ops): Delete the num_regs, regmap, and regset_bitmap fields. New field regs_info. [HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare. * i387-fp.c (num_xmm_registers): Delete. (i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno calls to new interface. (i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache) (i387_xsave_to_cache): Adjust find_regno calls to new interface. Infer the number of xmm registers from the regcache's target description. * i387-fp.h (num_xmm_registers): Delete. * inferiors.c (add_thread): Don't install the thread's regcache here. * proc-service.c (gregset_info): Fetch the current inferior's regs_info. Adjust to use it. * regcache.c: Include tdesc.h. (register_bytes, reg_defs, num_registers) (gdbserver_expedite_regs): Delete. (get_thread_regcache): If the thread doesn't have a regcache yet, create one, instead of aborting gdbserver. (regcache_invalidate_one): Rename to ... (regcache_invalidate_thread): ... this. (regcache_invalidate_one): New. (regcache_invalidate): Only invalidate registers of the current process. (init_register_cache): Add target_desc parameter, and use it. (new_register_cache): Ditto. Assert the target description has a non zero registers_size. (regcache_cpy): Add assertions. Adjust. (realloc_register_cache, set_register_cache): Delete. (registers_to_string, registers_from_string): Adjust. (find_register_by_name, find_regno, find_register_by_number) (register_cache_size): Add target_desc parameter, and use it. (free_register_cache_thread, free_register_cache_thread_one) (regcache_release, register_cache_size): New. (register_size): Add target_desc parameter, and use it. (register_data, supply_register, supply_register_zeroed) (supply_regblock, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Adjust. * regcache.h (struct target_desc): Forward declare. (struct regcache) <tdesc>: New field. (init_register_cache, new_register_cache): Add target_desc parameter. (regcache_invalidate_thread): Declare. (regcache_invalidate_one): Delete declaration. (regcache_release): Declare. (find_register_by_number, register_cache_size, register_size) (find_regno): Add target_desc parameter. (gdbserver_expedite_regs, gdbserver_xmltarget): Delete declarations. * remote-utils.c: Include tdesc.h. (outreg, prepare_resume_reply): Adjust. * server.c: Include tdesc.h. (gdbserver_xmltarget): Delete declaration. (get_features_xml, process_serial_event): Adjust. * server.h [IN_PROCESS_AGENT] (struct target_desc): Forward declare. (struct process_info) <tdesc>: New field. (ipa_tdesc): Declare. * tdesc.c: New file. * tdesc.h: New file. * tracepoint.c: Include tdesc.h. [IN_PROCESS_AGENT] (ipa_tdesc): Define. (get_context_regcache): Adjust to pass ipa_tdesc down. (do_action_at_tracepoint): Adjust to get the register cache size from the context regcache's description. (traceframe_walk_blocks): Adjust to get the register cache size from the current trace frame's description. (traceframe_get_pc): Adjust to get current trace frame's description and pass it down. (gdb_collect): Adjust to get the register cache size from the IPA's description. * linux-amd64-ipa.c (tdesc_amd64_linux): Declare. (gdbserver_xmltarget): Delete. (initialize_low_tracepoint): Set the ipa's target description. * linux-i386-ipa.c (tdesc_i386_linux): Declare. (initialize_low_tracepoint): Set the ipa's target description. * linux-x86-low.c: Include tdesc.h. [__x86_64__] (is_64bit_tdesc): New. (ps_get_thread_area, x86_get_thread_area): Use it. (i386_cannot_store_register): Rename to ... (x86_cannot_store_register): ... this. Use is_64bit_tdesc. (i386_cannot_fetch_register): Rename to ... (x86_cannot_fetch_register): ... this. Use is_64bit_tdesc. (x86_fill_gregset, x86_store_gregset): Adjust register_size calls to new interface. (target_regsets): Rename to ... (x86_regsets): ... this. (x86_get_pc, x86_set_pc): Adjust register_size calls to new interface. (x86_siginfo_fixup): Use is_64bit_tdesc. [__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux) (tdesc_x32_avx_linux, tdesc_x32_linux) (tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux): Declare. (x86_linux_update_xmltarget): Delete. (I386_LINUX_XSAVE_XCR0_OFFSET): Define. (have_ptrace_getfpxregs, have_ptrace_getregset): New. (AMD64_LINUX_USER64_CS): New. (x86_linux_read_description): New, based on x86_linux_update_xmltarget. (same_process_callback): New. (x86_arch_setup_process_callback): New. (x86_linux_update_xmltarget): New. (x86_regsets_info): New. (amd64_linux_regs_info): New. (i386_linux_usrregs_info): New. (i386_linux_regs_info): New. (x86_linux_regs_info): New. (x86_arch_setup): Reimplement. (x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc. (x86_emit_ops): Ditto. (the_low_target): Adjust. Install x86_linux_regs_info, x86_cannot_fetch_register, and x86_cannot_store_register. (initialize_low_arch): New. * linux-ia64-low.c (tdesc_ia64): Declare. (ia64_fetch_register): Adjust. (ia64_usrregs_info, regs_info): New globals. (ia64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sparc-low.c (tdesc_sparc64): Declare. (sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack): Adjust. (sparc_arch_setup): New function. (sparc_regsets_info, sparc_usrregs_info, regs_info): New globals. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l) (tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l) (tdesc_powerpc_64l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx64l): Declare. (ppc_cannot_store_register, ppc_collect_ptrace_register) (ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc) (ppc_set_pc, ppc_get_hwcap): Adjust. (ppc_usrregs_info): Forward declare. (!__powerpc64__) ppc_regmap_adjusted: New global. (ppc_arch_setup): Adjust to the current process'es target description. (ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset) (ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse) (ppc_store_evrregset): Adjust. (target_regsets): Rename to ... (ppc_regsets): ... this, and make static. (ppc_usrregs_info, ppc_regsets_info, regs_info): New globals. (ppc_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1) (tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1) (tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1) (tdesc_s390x_linux64v2): Declare. (s390_collect_ptrace_register, s390_supply_ptrace_register) (s390_fill_gregset, s390_store_last_break): Adjust. (target_regsets): Rename to ... (s390_regsets): ... this, and make static. (s390_get_pc, s390_set_pc): Adjust. (s390_get_hwcap): New target_desc parameter, and use it. [__s390x__] (have_hwcap_s390_high_gprs): New global. (s390_arch_setup): Adjust to set the current process'es target description. Don't adjust the regmap. (s390_usrregs_info, s390_regsets_info, regs_info): New globals. [__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264) (regs_info_3264): New globals. (s390_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux) (tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare. [__mips64] (init_registers_mips_linux) (init_registers_mips_dsp_linux): Delete defines. [__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines. (have_dsp): New global. (mips_read_description): New, based on mips_arch_setup. (mips_arch_setup): Reimplement. (get_usrregs_info): New function. (mips_cannot_fetch_register, mips_cannot_store_register) (mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset) (mips_fill_fpregset, mips_store_fpregset): Adjust. (target_regsets): Rename to ... (mips_regsets): ... this, and make static. (mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info) (dsp_regs_info, regs_info): New globals. (mips_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt) (tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (arm_fill_vfpregset, arm_store_vfpregset): Adjust. (arm_read_description): New, with bits factored from arm_arch_setup. (arm_arch_setup): Reimplement. (target_regsets): Rename to ... (arm_regsets): ... this, and make static. (arm_regsets_info, arm_usrregs_info, regs_info): New globals. (arm_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m68k-low.c (tdesc_m68k): Declare. (target_regsets): Rename to ... (m68k_regsets): ... this, and make static. (m68k_regsets_info, m68k_usrregs_info, regs_info): New globals. (m68k_regs_info): New function. (m68k_arch_setup): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sh-low.c (tdesc_sharch): Declare. (target_regsets): Rename to ... (sh_regsets): ... this, and make static. (sh_regsets_info, sh_usrregs_info, regs_info): New globals. (sh_regs_info, sh_arch_setup): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-bfin-low.c (tdesc_bfin): Declare. (bfin_arch_setup): New function. (bfin_usrregs_info, regs_info): New globals. (bfin_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_cris): Declare. (cris_arch_setup): New function. (cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_crisv32): Declare. (cris_arch_setup): New function. (cris_regsets_info, cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m32r-low.c (tdesc_m32r): Declare. (m32r_arch_setup): New function. (m32r_usrregs_info, regs_info): New globals. (m32r_regs_info): Adjust. (initialize_low_arch): New function. * linux-tic6x-low.c (tdesc_tic6x_c64xp_linux) (tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare. (tic6x_usrregs_info): Forward declare. (tic6x_read_description): New function, based on ... (tic6x_arch_setup): ... this. Reimplement. (target_regsets): Rename to ... (tic6x_regsets): ... this, and make static. (tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals. (tic6x_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-xtensa-low.c (tdesc_xtensa): Declare. (xtensa_fill_gregset, xtensa_store_gregset): Adjust. (target_regsets): Rename to ... (xtensa_regsets): ... this, and make static. (xtensa_regsets_info, xtensa_usrregs_info, regs_info): New globals. (xtensa_arch_setup, xtensa_regs_info): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-nios2-low.c (tdesc_nios2_linux): Declare. (nios2_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (nios2_regsets): ... this. (nios2_regsets_info, nios2_usrregs_info, regs_info): New globals. (nios2_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-aarch64-low.c (tdesc_aarch64): Declare. (aarch64_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (aarch64_regsets): ... this. (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals. (aarch64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare globals. (target_regsets): Rename to ... (tile_regsets): ... this. (tile_regsets_info, tile_usrregs_info, regs_info): New globals. (tile_regs_info): New function. (tile_arch_setup): Set the current process'es tdesc. (the_low_target): Adjust. (initialize_low_arch): New function. * spu-low.c (tdesc_spu): Declare. (spu_create_inferior, spu_attach): Set the new process'es tdesc. * win32-arm-low.c (tdesc_arm): Declare. (arm_arch_setup): New function. (the_low_target): Install arm_arch_setup instead of init_registers_arm. * win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare. (init_windows_x86): Rename to ... (i386_arch_setup): ... this. Set `win32_tdesc'. (the_low_target): Adjust. * win32-low.c (win32_tdesc): New global. (child_add_thread): Don't create the thread cache here. (do_initial_child_stuff): Set the new process'es tdesc. * win32-low.h (struct target_desc): Forward declare. (win32_tdesc): Declare. * lynx-i386-low.c (tdesc_i386): Declare global. (lynx_i386_arch_setup): Set `lynx_tdesc'. * lynx-low.c (lynx_tdesc): New global. (lynx_add_process): Set the new process'es tdesc. * lynx-low.h (struct target_desc): Forward declare. (lynx_tdesc): Declare global. * lynx-ppc-low.c (tdesc_powerpc_32): Declare global. (lynx_ppc_arch_setup): Set `lynx_tdesc'. * nto-low.c (nto_tdesc): New global. (do_attach): Set the new process'es tdesc. * nto-low.h (struct target_desc): Forward declare. (nto_tdesc): Declare. * nto-x86-low.c (tdesc_i386): Declare. (nto_x86_arch_setup): Set `nto_tdesc'. gdb/ 2013-06-07 Pedro Alves <palves@redhat.com> * regformats/regdat.sh: Output #include tdesc.h. Make globals static. Output a global target description pointer. (init_registers_${name}): Adjust to initialize a target description structure.
2013-06-07 12:46:59 +02:00
gregset_info (void)
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
{
int i = 0;
gdbserver/linux-low: turn 'regs_info' into a method gdbserver/ChangeLog: 2020-04-02 Tankut Baris Aktemur <tankut.baris.aktemur@intel.com> Turn the 'regs_info' linux target op into a method of linux_process_target. * linux-low.h (struct linux_target_ops) <regs_info>: Remove. (class linux_process_target) <get_regs_info>: Define. Update the callers below. * linux-low.cc (linux_process_target::fetch_registers) (linux_process_target::store_registers) * proc-service.cc (gregset_info) * linux-x86-low.cc (class x86_target) <get_regs_info>: Declare. (x86_linux_regs_info): Turn into ... (x86_target::get_regs_info): ...this. (the_low_target): Remove the op field. * linux-aarch64-low.cc (class aarch64_target) <get_regs_info>: Declare. (aarch64_regs_info): Turn into ... (aarch64_target::get_regs_info): ...this. (the_low_target): Remove the op field. * linux-arm-low.cc (class arm_target) <get_regs_info>: Declare. (arm_regs_info): Turn into ... (arm_target::get_regs_info): ...this. (the_low_target): Remove the op field. * linux-bfin-low.cc (class bfin_target) <get_regs_info>: Declare. (bfin_regs_info): Turn into ... (bfin_target::get_regs_info): ...this. (the_low_target): Remove the op field. * linux-cris-low.cc (class cris_target) <get_regs_info>: Declare. (cris_regs_info): Turn into ... (cris_target::get_regs_info): ...this. (the_low_target): Remove the op field. * linux-crisv32-low.cc (class crisv32_target) <get_regs_info>: Declare. (crisv32_regs_info): Turn into ... (crisv32_target::get_regs_info): ...this. (the_low_target): Remove the op field. * linux-ia64-low.cc (class ia64_target) <get_regs_info>: Declare. (ia64_regs_info): Turn into ... (ia64_target::get_regs_info): ...this. (the_low_target): Remove the op field. * linux-m32r-low.cc (class m32r_target) <get_regs_info>: Declare. (m32r_regs_info): Turn into ... (m32r_target::get_regs_info): ...this. (the_low_target): Remove the op field. * linux-m68k-low.cc (class m68k_target) <get_regs_info>: Declare. (m68k_regs_info): Turn into ... (m68k_target::get_regs_info): ...this. (the_low_target): Remove the op field. * linux-mips-low.cc (class mips_target) <get_regs_info>: Declare. (mips_regs_info): Turn into ... (mips_target::get_regs_info): ...this. (the_low_target): Remove the op field. (get_usrregs_info): Update the call to the op. * linux-nios2-low.cc (class nios2_target) <get_regs_info>: Declare. (nios2_regs_info): Turn into ... (nios2_target::get_regs_info): ...this. (the_low_target): Remove the op field. * linux-ppc-low.cc (class ppc_target) <get_regs_info>: Declare. (ppc_regs_info): Turn into ... (ppc_target::get_regs_info): ...this. (the_low_target): Remove the op field. * linux-riscv-low.cc (class riscv_target) <get_regs_info>: Declare. (riscv_regs_info): Turn into ... (riscv_target::get_regs_info): ...this. (the_low_target): Remove the op field. * linux-s390-low.cc (class s390_target) <get_regs_info>: Declare. (s390_regs_info): Turn into ... (s390_target::get_regs_info): ...this. (the_low_target): Remove the op field. (s390_collect_ptrace_register) (s390_supply_ptrace_register) (s390_fill_gregset): Update the call to the op. * linux-sh-low.cc (class sh_target) <get_regs_info>: Declare. (sh_regs_info): Turn into ... (sh_target::get_regs_info): ...this. (the_low_target): Remove the op field. * linux-sparc-low.cc (class sparc_target) <get_regs_info>: Declare. (sparc_regs_info): Turn into ... (sparc_target::get_regs_info): ...this. (the_low_target): Remove the op field. * linux-tic6x-low.cc (class tic6x_target) <get_regs_info>: Declare. (tic6x_regs_info): Turn into ... (tic6x_target::get_regs_info): ...this. (the_low_target): Remove the op field. * linux-tile-low.cc (class tile_target) <get_regs_info>: Declare. (tile_regs_info): Turn into ... (tile_target::get_regs_info): ...this. (the_low_target): Remove the op field. * linux-xtensa-low.cc (class xtensa_target) <get_regs_info>: Declare. (xtensa_regs_info): Turn into ... (xtensa_target::get_regs_info): ...this. (the_low_target): Remove the op field.
2020-04-02 15:11:23 +02:00
const regs_info *regs_info = the_linux_target->get_regs_info ();
[GDBserver] Multi-process + multi-arch This patch makes GDBserver support multi-process + biarch. Currently, if you're debugging more than one process at once with a single gdbserver (in extended-remote mode), then all processes must have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you see this: Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] Reading symbols from /home/pedro/gdb/tests/main32...done. Temporary breakpoint 2 at 0x4004cf: main. (2 locations) Starting program: /home/pedro/gdb/tests/main32 warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64 warning: Architecture rejected target-supplied description Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... etc, etc ... Even though the process was running a 32-bit program, GDBserver sent back to GDB a register set in 64-bit layout. A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a while ago made GDB track a target_gdbarch per inferior, and as consequence, fetch a target description per-inferior. This patch is the GDBserver counterpart, that makes GDBserver keep track of each process'es XML target description and register layout. So in the example above, GDBserver will send the correct register set in 32-bit layout to GDB. A new "struct target_desc" object (tdesc for short) is added, that holds the target description and register layout information about each process. Each `struct process_info' holds a pointer to a target description. The regcache also gains a pointer to a target description, mainly for convenience, and parallel with GDB (and possible future support for programs that flip processor modes). The low target's arch_setup routines are responsible for setting the process'es correct tdesc. This isn't that much different to how things were done before, except that instead of detecting the inferior process'es architecture and calling the corresponding init_registers_FOO routine, which would change the regcache layout globals and recreate the threads' regcaches, the regcache.c globals are gone, and the init_registers_$BAR routines now each initialize a separate global struct target_desc object (one for each arch variant GDBserver supports), and so all the init_registers_$BAR routines that are built into GDBserver are called early at GDBserver startup time (similarly to how GDB handles its built-in target descriptions), and then the arch_setup routine is responsible for making process_info->tdesc point to one of these target description globals. The regcache module is all parameterized to get the regcache's layout from the tdesc object instead of the old register_bytes, etc. globals. The threads' regcaches are now created lazily. The old scheme where we created each of them when we added a new thread doesn't work anymore, because we add the main thread/lwp before we see it stop for the first time, and it is only when we see the thread stop for the first time that we have a chance of determining the inferior's architecture (through the_low_target.arch_setup). Therefore when we add the main thread we don't know which architecture/tdesc its regcache should have. This patch makes the gdb.multi/multi-arch.exp test now pass against (extended-remote) GDBserver. It currently fails, without this patch. The IPA also uses the regcache, so it gains a new global struct target_desc pointer, which points at the description of the process it is loaded in. Re. the linux-low.c & friends changes. Since the register map etc. may differ between processes (64-bit vs 32-bit) etc., the linux_target_ops num_regs, regmap and regset_bitmap data fields are no longer sufficient. A new method is added in their place that returns a pointer to a new struct that includes all info linux-low.c needs to access registers of the current inferior. The patch/discussion that originally introduced linux-low.c:disabled_regsets mentions that the disabled_regsets set may be different per mode (in a biarch setup), and indeed that is cleared whenever we start a new (first) inferior, so that global is moved as well behind the new `struct regs_info'. On the x86 side: I simply replaced the i387-fp.c:num_xmm_registers global with a check for 64-bit or 32-bit process, which is equivalent to how the global was set. This avoided coming up with some more general mechanism that would work for all targets that use this module (GNU/Linux, Windows, etc.). Tested: GNU/Linux IA64 GNU/Linux MIPS64 GNU/Linux PowerPC (Fedora 16) GNU/Linux s390x (Fedora 16) GNU/Linux sparc64 (Debian) GNU/Linux x86_64, -m64 and -m32 (Fedora 17) Cross built, and smoke tested: i686-w64-mingw32, under Wine. GNU/Linux TI C6x, by Yao Qi. Cross built but otherwise not tested: aarch64-linux-gnu arm-linux-gnu m68k-linux nios2-linux-gnu sh-linux-gnu spu tilegx-unknown-linux-gnu Completely untested: GNU/Linux Blackfin GNU/Linux CRIS GNU/Linux CRISv32 GNU/Linux TI Xtensa GNU/Linux M32R LynxOS QNX NTO gdb/gdbserver/ 2013-06-07 Pedro Alves <palves@redhat.com> * Makefile.in (OBS): Add tdesc.o. (IPA_OBJS): Add tdesc-ipa.o. (tdesc-ipa.o): New rule. * ax.c (gdb_eval_agent_expr): Adjust register_size call to new interface. * linux-low.c (new_inferior): Delete. (disabled_regsets, num_regsets): Delete. (linux_add_process): Adjust to set the new per-process new_inferior flag. (linux_detach_one_lwp): Adjust to call regcache_invalidate_thread. (linux_wait_for_lwp): Adjust. Only call arch_setup if the event was a stop. When calling arch_setup, switch the current inferior to the thread that got an event. (linux_resume_one_lwp): Adjust to call regcache_invalidate_thread. (regsets_fetch_inferior_registers) (regsets_store_inferior_registers): New regsets_info parameter. Adjust to use it. (linux_register_in_regsets): New regs_info parameter. Adjust to use it. (register_addr, fetch_register, store_register): New usrregs_info parameter. Adjust to use it. (usr_fetch_inferior_registers, usr_store_inferior_registers): New parameter regs_info. Adjust to use it. (linux_fetch_registers): Get the current inferior's regs_info, and adjust to use it. (linux_store_registers): Ditto. [HAVE_LINUX_REGSETS] (initialize_regsets_info): New. (initialize_low): Don't initialize the target_regsets here. Call initialize_low_arch. * linux-low.h (target_regsets): Delete declaration. (struct regsets_info): New. (struct usrregs_info): New. (struct regs_info): New. (struct process_info_private) <new_inferior>: New field. (struct linux_target_ops): Delete the num_regs, regmap, and regset_bitmap fields. New field regs_info. [HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare. * i387-fp.c (num_xmm_registers): Delete. (i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno calls to new interface. (i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache) (i387_xsave_to_cache): Adjust find_regno calls to new interface. Infer the number of xmm registers from the regcache's target description. * i387-fp.h (num_xmm_registers): Delete. * inferiors.c (add_thread): Don't install the thread's regcache here. * proc-service.c (gregset_info): Fetch the current inferior's regs_info. Adjust to use it. * regcache.c: Include tdesc.h. (register_bytes, reg_defs, num_registers) (gdbserver_expedite_regs): Delete. (get_thread_regcache): If the thread doesn't have a regcache yet, create one, instead of aborting gdbserver. (regcache_invalidate_one): Rename to ... (regcache_invalidate_thread): ... this. (regcache_invalidate_one): New. (regcache_invalidate): Only invalidate registers of the current process. (init_register_cache): Add target_desc parameter, and use it. (new_register_cache): Ditto. Assert the target description has a non zero registers_size. (regcache_cpy): Add assertions. Adjust. (realloc_register_cache, set_register_cache): Delete. (registers_to_string, registers_from_string): Adjust. (find_register_by_name, find_regno, find_register_by_number) (register_cache_size): Add target_desc parameter, and use it. (free_register_cache_thread, free_register_cache_thread_one) (regcache_release, register_cache_size): New. (register_size): Add target_desc parameter, and use it. (register_data, supply_register, supply_register_zeroed) (supply_regblock, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Adjust. * regcache.h (struct target_desc): Forward declare. (struct regcache) <tdesc>: New field. (init_register_cache, new_register_cache): Add target_desc parameter. (regcache_invalidate_thread): Declare. (regcache_invalidate_one): Delete declaration. (regcache_release): Declare. (find_register_by_number, register_cache_size, register_size) (find_regno): Add target_desc parameter. (gdbserver_expedite_regs, gdbserver_xmltarget): Delete declarations. * remote-utils.c: Include tdesc.h. (outreg, prepare_resume_reply): Adjust. * server.c: Include tdesc.h. (gdbserver_xmltarget): Delete declaration. (get_features_xml, process_serial_event): Adjust. * server.h [IN_PROCESS_AGENT] (struct target_desc): Forward declare. (struct process_info) <tdesc>: New field. (ipa_tdesc): Declare. * tdesc.c: New file. * tdesc.h: New file. * tracepoint.c: Include tdesc.h. [IN_PROCESS_AGENT] (ipa_tdesc): Define. (get_context_regcache): Adjust to pass ipa_tdesc down. (do_action_at_tracepoint): Adjust to get the register cache size from the context regcache's description. (traceframe_walk_blocks): Adjust to get the register cache size from the current trace frame's description. (traceframe_get_pc): Adjust to get current trace frame's description and pass it down. (gdb_collect): Adjust to get the register cache size from the IPA's description. * linux-amd64-ipa.c (tdesc_amd64_linux): Declare. (gdbserver_xmltarget): Delete. (initialize_low_tracepoint): Set the ipa's target description. * linux-i386-ipa.c (tdesc_i386_linux): Declare. (initialize_low_tracepoint): Set the ipa's target description. * linux-x86-low.c: Include tdesc.h. [__x86_64__] (is_64bit_tdesc): New. (ps_get_thread_area, x86_get_thread_area): Use it. (i386_cannot_store_register): Rename to ... (x86_cannot_store_register): ... this. Use is_64bit_tdesc. (i386_cannot_fetch_register): Rename to ... (x86_cannot_fetch_register): ... this. Use is_64bit_tdesc. (x86_fill_gregset, x86_store_gregset): Adjust register_size calls to new interface. (target_regsets): Rename to ... (x86_regsets): ... this. (x86_get_pc, x86_set_pc): Adjust register_size calls to new interface. (x86_siginfo_fixup): Use is_64bit_tdesc. [__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux) (tdesc_x32_avx_linux, tdesc_x32_linux) (tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux): Declare. (x86_linux_update_xmltarget): Delete. (I386_LINUX_XSAVE_XCR0_OFFSET): Define. (have_ptrace_getfpxregs, have_ptrace_getregset): New. (AMD64_LINUX_USER64_CS): New. (x86_linux_read_description): New, based on x86_linux_update_xmltarget. (same_process_callback): New. (x86_arch_setup_process_callback): New. (x86_linux_update_xmltarget): New. (x86_regsets_info): New. (amd64_linux_regs_info): New. (i386_linux_usrregs_info): New. (i386_linux_regs_info): New. (x86_linux_regs_info): New. (x86_arch_setup): Reimplement. (x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc. (x86_emit_ops): Ditto. (the_low_target): Adjust. Install x86_linux_regs_info, x86_cannot_fetch_register, and x86_cannot_store_register. (initialize_low_arch): New. * linux-ia64-low.c (tdesc_ia64): Declare. (ia64_fetch_register): Adjust. (ia64_usrregs_info, regs_info): New globals. (ia64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sparc-low.c (tdesc_sparc64): Declare. (sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack): Adjust. (sparc_arch_setup): New function. (sparc_regsets_info, sparc_usrregs_info, regs_info): New globals. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l) (tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l) (tdesc_powerpc_64l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx64l): Declare. (ppc_cannot_store_register, ppc_collect_ptrace_register) (ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc) (ppc_set_pc, ppc_get_hwcap): Adjust. (ppc_usrregs_info): Forward declare. (!__powerpc64__) ppc_regmap_adjusted: New global. (ppc_arch_setup): Adjust to the current process'es target description. (ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset) (ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse) (ppc_store_evrregset): Adjust. (target_regsets): Rename to ... (ppc_regsets): ... this, and make static. (ppc_usrregs_info, ppc_regsets_info, regs_info): New globals. (ppc_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1) (tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1) (tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1) (tdesc_s390x_linux64v2): Declare. (s390_collect_ptrace_register, s390_supply_ptrace_register) (s390_fill_gregset, s390_store_last_break): Adjust. (target_regsets): Rename to ... (s390_regsets): ... this, and make static. (s390_get_pc, s390_set_pc): Adjust. (s390_get_hwcap): New target_desc parameter, and use it. [__s390x__] (have_hwcap_s390_high_gprs): New global. (s390_arch_setup): Adjust to set the current process'es target description. Don't adjust the regmap. (s390_usrregs_info, s390_regsets_info, regs_info): New globals. [__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264) (regs_info_3264): New globals. (s390_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux) (tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare. [__mips64] (init_registers_mips_linux) (init_registers_mips_dsp_linux): Delete defines. [__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines. (have_dsp): New global. (mips_read_description): New, based on mips_arch_setup. (mips_arch_setup): Reimplement. (get_usrregs_info): New function. (mips_cannot_fetch_register, mips_cannot_store_register) (mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset) (mips_fill_fpregset, mips_store_fpregset): Adjust. (target_regsets): Rename to ... (mips_regsets): ... this, and make static. (mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info) (dsp_regs_info, regs_info): New globals. (mips_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt) (tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (arm_fill_vfpregset, arm_store_vfpregset): Adjust. (arm_read_description): New, with bits factored from arm_arch_setup. (arm_arch_setup): Reimplement. (target_regsets): Rename to ... (arm_regsets): ... this, and make static. (arm_regsets_info, arm_usrregs_info, regs_info): New globals. (arm_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m68k-low.c (tdesc_m68k): Declare. (target_regsets): Rename to ... (m68k_regsets): ... this, and make static. (m68k_regsets_info, m68k_usrregs_info, regs_info): New globals. (m68k_regs_info): New function. (m68k_arch_setup): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sh-low.c (tdesc_sharch): Declare. (target_regsets): Rename to ... (sh_regsets): ... this, and make static. (sh_regsets_info, sh_usrregs_info, regs_info): New globals. (sh_regs_info, sh_arch_setup): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-bfin-low.c (tdesc_bfin): Declare. (bfin_arch_setup): New function. (bfin_usrregs_info, regs_info): New globals. (bfin_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_cris): Declare. (cris_arch_setup): New function. (cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_crisv32): Declare. (cris_arch_setup): New function. (cris_regsets_info, cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m32r-low.c (tdesc_m32r): Declare. (m32r_arch_setup): New function. (m32r_usrregs_info, regs_info): New globals. (m32r_regs_info): Adjust. (initialize_low_arch): New function. * linux-tic6x-low.c (tdesc_tic6x_c64xp_linux) (tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare. (tic6x_usrregs_info): Forward declare. (tic6x_read_description): New function, based on ... (tic6x_arch_setup): ... this. Reimplement. (target_regsets): Rename to ... (tic6x_regsets): ... this, and make static. (tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals. (tic6x_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-xtensa-low.c (tdesc_xtensa): Declare. (xtensa_fill_gregset, xtensa_store_gregset): Adjust. (target_regsets): Rename to ... (xtensa_regsets): ... this, and make static. (xtensa_regsets_info, xtensa_usrregs_info, regs_info): New globals. (xtensa_arch_setup, xtensa_regs_info): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-nios2-low.c (tdesc_nios2_linux): Declare. (nios2_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (nios2_regsets): ... this. (nios2_regsets_info, nios2_usrregs_info, regs_info): New globals. (nios2_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-aarch64-low.c (tdesc_aarch64): Declare. (aarch64_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (aarch64_regsets): ... this. (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals. (aarch64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare globals. (target_regsets): Rename to ... (tile_regsets): ... this. (tile_regsets_info, tile_usrregs_info, regs_info): New globals. (tile_regs_info): New function. (tile_arch_setup): Set the current process'es tdesc. (the_low_target): Adjust. (initialize_low_arch): New function. * spu-low.c (tdesc_spu): Declare. (spu_create_inferior, spu_attach): Set the new process'es tdesc. * win32-arm-low.c (tdesc_arm): Declare. (arm_arch_setup): New function. (the_low_target): Install arm_arch_setup instead of init_registers_arm. * win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare. (init_windows_x86): Rename to ... (i386_arch_setup): ... this. Set `win32_tdesc'. (the_low_target): Adjust. * win32-low.c (win32_tdesc): New global. (child_add_thread): Don't create the thread cache here. (do_initial_child_stuff): Set the new process'es tdesc. * win32-low.h (struct target_desc): Forward declare. (win32_tdesc): Declare. * lynx-i386-low.c (tdesc_i386): Declare global. (lynx_i386_arch_setup): Set `lynx_tdesc'. * lynx-low.c (lynx_tdesc): New global. (lynx_add_process): Set the new process'es tdesc. * lynx-low.h (struct target_desc): Forward declare. (lynx_tdesc): Declare global. * lynx-ppc-low.c (tdesc_powerpc_32): Declare global. (lynx_ppc_arch_setup): Set `lynx_tdesc'. * nto-low.c (nto_tdesc): New global. (do_attach): Set the new process'es tdesc. * nto-low.h (struct target_desc): Forward declare. (nto_tdesc): Declare. * nto-x86-low.c (tdesc_i386): Declare. (nto_x86_arch_setup): Set `nto_tdesc'. gdb/ 2013-06-07 Pedro Alves <palves@redhat.com> * regformats/regdat.sh: Output #include tdesc.h. Make globals static. Output a global target description pointer. (init_registers_${name}): Adjust to initialize a target description structure.
2013-06-07 12:46:59 +02:00
struct regsets_info *regsets_info = regs_info->regsets_info;
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
[GDBserver] Multi-process + multi-arch This patch makes GDBserver support multi-process + biarch. Currently, if you're debugging more than one process at once with a single gdbserver (in extended-remote mode), then all processes must have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you see this: Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] Reading symbols from /home/pedro/gdb/tests/main32...done. Temporary breakpoint 2 at 0x4004cf: main. (2 locations) Starting program: /home/pedro/gdb/tests/main32 warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64 warning: Architecture rejected target-supplied description Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... etc, etc ... Even though the process was running a 32-bit program, GDBserver sent back to GDB a register set in 64-bit layout. A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a while ago made GDB track a target_gdbarch per inferior, and as consequence, fetch a target description per-inferior. This patch is the GDBserver counterpart, that makes GDBserver keep track of each process'es XML target description and register layout. So in the example above, GDBserver will send the correct register set in 32-bit layout to GDB. A new "struct target_desc" object (tdesc for short) is added, that holds the target description and register layout information about each process. Each `struct process_info' holds a pointer to a target description. The regcache also gains a pointer to a target description, mainly for convenience, and parallel with GDB (and possible future support for programs that flip processor modes). The low target's arch_setup routines are responsible for setting the process'es correct tdesc. This isn't that much different to how things were done before, except that instead of detecting the inferior process'es architecture and calling the corresponding init_registers_FOO routine, which would change the regcache layout globals and recreate the threads' regcaches, the regcache.c globals are gone, and the init_registers_$BAR routines now each initialize a separate global struct target_desc object (one for each arch variant GDBserver supports), and so all the init_registers_$BAR routines that are built into GDBserver are called early at GDBserver startup time (similarly to how GDB handles its built-in target descriptions), and then the arch_setup routine is responsible for making process_info->tdesc point to one of these target description globals. The regcache module is all parameterized to get the regcache's layout from the tdesc object instead of the old register_bytes, etc. globals. The threads' regcaches are now created lazily. The old scheme where we created each of them when we added a new thread doesn't work anymore, because we add the main thread/lwp before we see it stop for the first time, and it is only when we see the thread stop for the first time that we have a chance of determining the inferior's architecture (through the_low_target.arch_setup). Therefore when we add the main thread we don't know which architecture/tdesc its regcache should have. This patch makes the gdb.multi/multi-arch.exp test now pass against (extended-remote) GDBserver. It currently fails, without this patch. The IPA also uses the regcache, so it gains a new global struct target_desc pointer, which points at the description of the process it is loaded in. Re. the linux-low.c & friends changes. Since the register map etc. may differ between processes (64-bit vs 32-bit) etc., the linux_target_ops num_regs, regmap and regset_bitmap data fields are no longer sufficient. A new method is added in their place that returns a pointer to a new struct that includes all info linux-low.c needs to access registers of the current inferior. The patch/discussion that originally introduced linux-low.c:disabled_regsets mentions that the disabled_regsets set may be different per mode (in a biarch setup), and indeed that is cleared whenever we start a new (first) inferior, so that global is moved as well behind the new `struct regs_info'. On the x86 side: I simply replaced the i387-fp.c:num_xmm_registers global with a check for 64-bit or 32-bit process, which is equivalent to how the global was set. This avoided coming up with some more general mechanism that would work for all targets that use this module (GNU/Linux, Windows, etc.). Tested: GNU/Linux IA64 GNU/Linux MIPS64 GNU/Linux PowerPC (Fedora 16) GNU/Linux s390x (Fedora 16) GNU/Linux sparc64 (Debian) GNU/Linux x86_64, -m64 and -m32 (Fedora 17) Cross built, and smoke tested: i686-w64-mingw32, under Wine. GNU/Linux TI C6x, by Yao Qi. Cross built but otherwise not tested: aarch64-linux-gnu arm-linux-gnu m68k-linux nios2-linux-gnu sh-linux-gnu spu tilegx-unknown-linux-gnu Completely untested: GNU/Linux Blackfin GNU/Linux CRIS GNU/Linux CRISv32 GNU/Linux TI Xtensa GNU/Linux M32R LynxOS QNX NTO gdb/gdbserver/ 2013-06-07 Pedro Alves <palves@redhat.com> * Makefile.in (OBS): Add tdesc.o. (IPA_OBJS): Add tdesc-ipa.o. (tdesc-ipa.o): New rule. * ax.c (gdb_eval_agent_expr): Adjust register_size call to new interface. * linux-low.c (new_inferior): Delete. (disabled_regsets, num_regsets): Delete. (linux_add_process): Adjust to set the new per-process new_inferior flag. (linux_detach_one_lwp): Adjust to call regcache_invalidate_thread. (linux_wait_for_lwp): Adjust. Only call arch_setup if the event was a stop. When calling arch_setup, switch the current inferior to the thread that got an event. (linux_resume_one_lwp): Adjust to call regcache_invalidate_thread. (regsets_fetch_inferior_registers) (regsets_store_inferior_registers): New regsets_info parameter. Adjust to use it. (linux_register_in_regsets): New regs_info parameter. Adjust to use it. (register_addr, fetch_register, store_register): New usrregs_info parameter. Adjust to use it. (usr_fetch_inferior_registers, usr_store_inferior_registers): New parameter regs_info. Adjust to use it. (linux_fetch_registers): Get the current inferior's regs_info, and adjust to use it. (linux_store_registers): Ditto. [HAVE_LINUX_REGSETS] (initialize_regsets_info): New. (initialize_low): Don't initialize the target_regsets here. Call initialize_low_arch. * linux-low.h (target_regsets): Delete declaration. (struct regsets_info): New. (struct usrregs_info): New. (struct regs_info): New. (struct process_info_private) <new_inferior>: New field. (struct linux_target_ops): Delete the num_regs, regmap, and regset_bitmap fields. New field regs_info. [HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare. * i387-fp.c (num_xmm_registers): Delete. (i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno calls to new interface. (i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache) (i387_xsave_to_cache): Adjust find_regno calls to new interface. Infer the number of xmm registers from the regcache's target description. * i387-fp.h (num_xmm_registers): Delete. * inferiors.c (add_thread): Don't install the thread's regcache here. * proc-service.c (gregset_info): Fetch the current inferior's regs_info. Adjust to use it. * regcache.c: Include tdesc.h. (register_bytes, reg_defs, num_registers) (gdbserver_expedite_regs): Delete. (get_thread_regcache): If the thread doesn't have a regcache yet, create one, instead of aborting gdbserver. (regcache_invalidate_one): Rename to ... (regcache_invalidate_thread): ... this. (regcache_invalidate_one): New. (regcache_invalidate): Only invalidate registers of the current process. (init_register_cache): Add target_desc parameter, and use it. (new_register_cache): Ditto. Assert the target description has a non zero registers_size. (regcache_cpy): Add assertions. Adjust. (realloc_register_cache, set_register_cache): Delete. (registers_to_string, registers_from_string): Adjust. (find_register_by_name, find_regno, find_register_by_number) (register_cache_size): Add target_desc parameter, and use it. (free_register_cache_thread, free_register_cache_thread_one) (regcache_release, register_cache_size): New. (register_size): Add target_desc parameter, and use it. (register_data, supply_register, supply_register_zeroed) (supply_regblock, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Adjust. * regcache.h (struct target_desc): Forward declare. (struct regcache) <tdesc>: New field. (init_register_cache, new_register_cache): Add target_desc parameter. (regcache_invalidate_thread): Declare. (regcache_invalidate_one): Delete declaration. (regcache_release): Declare. (find_register_by_number, register_cache_size, register_size) (find_regno): Add target_desc parameter. (gdbserver_expedite_regs, gdbserver_xmltarget): Delete declarations. * remote-utils.c: Include tdesc.h. (outreg, prepare_resume_reply): Adjust. * server.c: Include tdesc.h. (gdbserver_xmltarget): Delete declaration. (get_features_xml, process_serial_event): Adjust. * server.h [IN_PROCESS_AGENT] (struct target_desc): Forward declare. (struct process_info) <tdesc>: New field. (ipa_tdesc): Declare. * tdesc.c: New file. * tdesc.h: New file. * tracepoint.c: Include tdesc.h. [IN_PROCESS_AGENT] (ipa_tdesc): Define. (get_context_regcache): Adjust to pass ipa_tdesc down. (do_action_at_tracepoint): Adjust to get the register cache size from the context regcache's description. (traceframe_walk_blocks): Adjust to get the register cache size from the current trace frame's description. (traceframe_get_pc): Adjust to get current trace frame's description and pass it down. (gdb_collect): Adjust to get the register cache size from the IPA's description. * linux-amd64-ipa.c (tdesc_amd64_linux): Declare. (gdbserver_xmltarget): Delete. (initialize_low_tracepoint): Set the ipa's target description. * linux-i386-ipa.c (tdesc_i386_linux): Declare. (initialize_low_tracepoint): Set the ipa's target description. * linux-x86-low.c: Include tdesc.h. [__x86_64__] (is_64bit_tdesc): New. (ps_get_thread_area, x86_get_thread_area): Use it. (i386_cannot_store_register): Rename to ... (x86_cannot_store_register): ... this. Use is_64bit_tdesc. (i386_cannot_fetch_register): Rename to ... (x86_cannot_fetch_register): ... this. Use is_64bit_tdesc. (x86_fill_gregset, x86_store_gregset): Adjust register_size calls to new interface. (target_regsets): Rename to ... (x86_regsets): ... this. (x86_get_pc, x86_set_pc): Adjust register_size calls to new interface. (x86_siginfo_fixup): Use is_64bit_tdesc. [__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux) (tdesc_x32_avx_linux, tdesc_x32_linux) (tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux): Declare. (x86_linux_update_xmltarget): Delete. (I386_LINUX_XSAVE_XCR0_OFFSET): Define. (have_ptrace_getfpxregs, have_ptrace_getregset): New. (AMD64_LINUX_USER64_CS): New. (x86_linux_read_description): New, based on x86_linux_update_xmltarget. (same_process_callback): New. (x86_arch_setup_process_callback): New. (x86_linux_update_xmltarget): New. (x86_regsets_info): New. (amd64_linux_regs_info): New. (i386_linux_usrregs_info): New. (i386_linux_regs_info): New. (x86_linux_regs_info): New. (x86_arch_setup): Reimplement. (x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc. (x86_emit_ops): Ditto. (the_low_target): Adjust. Install x86_linux_regs_info, x86_cannot_fetch_register, and x86_cannot_store_register. (initialize_low_arch): New. * linux-ia64-low.c (tdesc_ia64): Declare. (ia64_fetch_register): Adjust. (ia64_usrregs_info, regs_info): New globals. (ia64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sparc-low.c (tdesc_sparc64): Declare. (sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack): Adjust. (sparc_arch_setup): New function. (sparc_regsets_info, sparc_usrregs_info, regs_info): New globals. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l) (tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l) (tdesc_powerpc_64l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx64l): Declare. (ppc_cannot_store_register, ppc_collect_ptrace_register) (ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc) (ppc_set_pc, ppc_get_hwcap): Adjust. (ppc_usrregs_info): Forward declare. (!__powerpc64__) ppc_regmap_adjusted: New global. (ppc_arch_setup): Adjust to the current process'es target description. (ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset) (ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse) (ppc_store_evrregset): Adjust. (target_regsets): Rename to ... (ppc_regsets): ... this, and make static. (ppc_usrregs_info, ppc_regsets_info, regs_info): New globals. (ppc_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1) (tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1) (tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1) (tdesc_s390x_linux64v2): Declare. (s390_collect_ptrace_register, s390_supply_ptrace_register) (s390_fill_gregset, s390_store_last_break): Adjust. (target_regsets): Rename to ... (s390_regsets): ... this, and make static. (s390_get_pc, s390_set_pc): Adjust. (s390_get_hwcap): New target_desc parameter, and use it. [__s390x__] (have_hwcap_s390_high_gprs): New global. (s390_arch_setup): Adjust to set the current process'es target description. Don't adjust the regmap. (s390_usrregs_info, s390_regsets_info, regs_info): New globals. [__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264) (regs_info_3264): New globals. (s390_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux) (tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare. [__mips64] (init_registers_mips_linux) (init_registers_mips_dsp_linux): Delete defines. [__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines. (have_dsp): New global. (mips_read_description): New, based on mips_arch_setup. (mips_arch_setup): Reimplement. (get_usrregs_info): New function. (mips_cannot_fetch_register, mips_cannot_store_register) (mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset) (mips_fill_fpregset, mips_store_fpregset): Adjust. (target_regsets): Rename to ... (mips_regsets): ... this, and make static. (mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info) (dsp_regs_info, regs_info): New globals. (mips_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt) (tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (arm_fill_vfpregset, arm_store_vfpregset): Adjust. (arm_read_description): New, with bits factored from arm_arch_setup. (arm_arch_setup): Reimplement. (target_regsets): Rename to ... (arm_regsets): ... this, and make static. (arm_regsets_info, arm_usrregs_info, regs_info): New globals. (arm_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m68k-low.c (tdesc_m68k): Declare. (target_regsets): Rename to ... (m68k_regsets): ... this, and make static. (m68k_regsets_info, m68k_usrregs_info, regs_info): New globals. (m68k_regs_info): New function. (m68k_arch_setup): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sh-low.c (tdesc_sharch): Declare. (target_regsets): Rename to ... (sh_regsets): ... this, and make static. (sh_regsets_info, sh_usrregs_info, regs_info): New globals. (sh_regs_info, sh_arch_setup): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-bfin-low.c (tdesc_bfin): Declare. (bfin_arch_setup): New function. (bfin_usrregs_info, regs_info): New globals. (bfin_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_cris): Declare. (cris_arch_setup): New function. (cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_crisv32): Declare. (cris_arch_setup): New function. (cris_regsets_info, cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m32r-low.c (tdesc_m32r): Declare. (m32r_arch_setup): New function. (m32r_usrregs_info, regs_info): New globals. (m32r_regs_info): Adjust. (initialize_low_arch): New function. * linux-tic6x-low.c (tdesc_tic6x_c64xp_linux) (tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare. (tic6x_usrregs_info): Forward declare. (tic6x_read_description): New function, based on ... (tic6x_arch_setup): ... this. Reimplement. (target_regsets): Rename to ... (tic6x_regsets): ... this, and make static. (tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals. (tic6x_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-xtensa-low.c (tdesc_xtensa): Declare. (xtensa_fill_gregset, xtensa_store_gregset): Adjust. (target_regsets): Rename to ... (xtensa_regsets): ... this, and make static. (xtensa_regsets_info, xtensa_usrregs_info, regs_info): New globals. (xtensa_arch_setup, xtensa_regs_info): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-nios2-low.c (tdesc_nios2_linux): Declare. (nios2_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (nios2_regsets): ... this. (nios2_regsets_info, nios2_usrregs_info, regs_info): New globals. (nios2_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-aarch64-low.c (tdesc_aarch64): Declare. (aarch64_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (aarch64_regsets): ... this. (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals. (aarch64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare globals. (target_regsets): Rename to ... (tile_regsets): ... this. (tile_regsets_info, tile_usrregs_info, regs_info): New globals. (tile_regs_info): New function. (tile_arch_setup): Set the current process'es tdesc. (the_low_target): Adjust. (initialize_low_arch): New function. * spu-low.c (tdesc_spu): Declare. (spu_create_inferior, spu_attach): Set the new process'es tdesc. * win32-arm-low.c (tdesc_arm): Declare. (arm_arch_setup): New function. (the_low_target): Install arm_arch_setup instead of init_registers_arm. * win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare. (init_windows_x86): Rename to ... (i386_arch_setup): ... this. Set `win32_tdesc'. (the_low_target): Adjust. * win32-low.c (win32_tdesc): New global. (child_add_thread): Don't create the thread cache here. (do_initial_child_stuff): Set the new process'es tdesc. * win32-low.h (struct target_desc): Forward declare. (win32_tdesc): Declare. * lynx-i386-low.c (tdesc_i386): Declare global. (lynx_i386_arch_setup): Set `lynx_tdesc'. * lynx-low.c (lynx_tdesc): New global. (lynx_add_process): Set the new process'es tdesc. * lynx-low.h (struct target_desc): Forward declare. (lynx_tdesc): Declare global. * lynx-ppc-low.c (tdesc_powerpc_32): Declare global. (lynx_ppc_arch_setup): Set `lynx_tdesc'. * nto-low.c (nto_tdesc): New global. (do_attach): Set the new process'es tdesc. * nto-low.h (struct target_desc): Forward declare. (nto_tdesc): Declare. * nto-x86-low.c (tdesc_i386): Declare. (nto_x86_arch_setup): Set `nto_tdesc'. gdb/ 2013-06-07 Pedro Alves <palves@redhat.com> * regformats/regdat.sh: Output #include tdesc.h. Make globals static. Output a global target description pointer. (init_registers_${name}): Adjust to initialize a target description structure.
2013-06-07 12:46:59 +02:00
while (regsets_info->regsets[i].size != -1)
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
{
[GDBserver] Multi-process + multi-arch This patch makes GDBserver support multi-process + biarch. Currently, if you're debugging more than one process at once with a single gdbserver (in extended-remote mode), then all processes must have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you see this: Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] Reading symbols from /home/pedro/gdb/tests/main32...done. Temporary breakpoint 2 at 0x4004cf: main. (2 locations) Starting program: /home/pedro/gdb/tests/main32 warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64 warning: Architecture rejected target-supplied description Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... etc, etc ... Even though the process was running a 32-bit program, GDBserver sent back to GDB a register set in 64-bit layout. A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a while ago made GDB track a target_gdbarch per inferior, and as consequence, fetch a target description per-inferior. This patch is the GDBserver counterpart, that makes GDBserver keep track of each process'es XML target description and register layout. So in the example above, GDBserver will send the correct register set in 32-bit layout to GDB. A new "struct target_desc" object (tdesc for short) is added, that holds the target description and register layout information about each process. Each `struct process_info' holds a pointer to a target description. The regcache also gains a pointer to a target description, mainly for convenience, and parallel with GDB (and possible future support for programs that flip processor modes). The low target's arch_setup routines are responsible for setting the process'es correct tdesc. This isn't that much different to how things were done before, except that instead of detecting the inferior process'es architecture and calling the corresponding init_registers_FOO routine, which would change the regcache layout globals and recreate the threads' regcaches, the regcache.c globals are gone, and the init_registers_$BAR routines now each initialize a separate global struct target_desc object (one for each arch variant GDBserver supports), and so all the init_registers_$BAR routines that are built into GDBserver are called early at GDBserver startup time (similarly to how GDB handles its built-in target descriptions), and then the arch_setup routine is responsible for making process_info->tdesc point to one of these target description globals. The regcache module is all parameterized to get the regcache's layout from the tdesc object instead of the old register_bytes, etc. globals. The threads' regcaches are now created lazily. The old scheme where we created each of them when we added a new thread doesn't work anymore, because we add the main thread/lwp before we see it stop for the first time, and it is only when we see the thread stop for the first time that we have a chance of determining the inferior's architecture (through the_low_target.arch_setup). Therefore when we add the main thread we don't know which architecture/tdesc its regcache should have. This patch makes the gdb.multi/multi-arch.exp test now pass against (extended-remote) GDBserver. It currently fails, without this patch. The IPA also uses the regcache, so it gains a new global struct target_desc pointer, which points at the description of the process it is loaded in. Re. the linux-low.c & friends changes. Since the register map etc. may differ between processes (64-bit vs 32-bit) etc., the linux_target_ops num_regs, regmap and regset_bitmap data fields are no longer sufficient. A new method is added in their place that returns a pointer to a new struct that includes all info linux-low.c needs to access registers of the current inferior. The patch/discussion that originally introduced linux-low.c:disabled_regsets mentions that the disabled_regsets set may be different per mode (in a biarch setup), and indeed that is cleared whenever we start a new (first) inferior, so that global is moved as well behind the new `struct regs_info'. On the x86 side: I simply replaced the i387-fp.c:num_xmm_registers global with a check for 64-bit or 32-bit process, which is equivalent to how the global was set. This avoided coming up with some more general mechanism that would work for all targets that use this module (GNU/Linux, Windows, etc.). Tested: GNU/Linux IA64 GNU/Linux MIPS64 GNU/Linux PowerPC (Fedora 16) GNU/Linux s390x (Fedora 16) GNU/Linux sparc64 (Debian) GNU/Linux x86_64, -m64 and -m32 (Fedora 17) Cross built, and smoke tested: i686-w64-mingw32, under Wine. GNU/Linux TI C6x, by Yao Qi. Cross built but otherwise not tested: aarch64-linux-gnu arm-linux-gnu m68k-linux nios2-linux-gnu sh-linux-gnu spu tilegx-unknown-linux-gnu Completely untested: GNU/Linux Blackfin GNU/Linux CRIS GNU/Linux CRISv32 GNU/Linux TI Xtensa GNU/Linux M32R LynxOS QNX NTO gdb/gdbserver/ 2013-06-07 Pedro Alves <palves@redhat.com> * Makefile.in (OBS): Add tdesc.o. (IPA_OBJS): Add tdesc-ipa.o. (tdesc-ipa.o): New rule. * ax.c (gdb_eval_agent_expr): Adjust register_size call to new interface. * linux-low.c (new_inferior): Delete. (disabled_regsets, num_regsets): Delete. (linux_add_process): Adjust to set the new per-process new_inferior flag. (linux_detach_one_lwp): Adjust to call regcache_invalidate_thread. (linux_wait_for_lwp): Adjust. Only call arch_setup if the event was a stop. When calling arch_setup, switch the current inferior to the thread that got an event. (linux_resume_one_lwp): Adjust to call regcache_invalidate_thread. (regsets_fetch_inferior_registers) (regsets_store_inferior_registers): New regsets_info parameter. Adjust to use it. (linux_register_in_regsets): New regs_info parameter. Adjust to use it. (register_addr, fetch_register, store_register): New usrregs_info parameter. Adjust to use it. (usr_fetch_inferior_registers, usr_store_inferior_registers): New parameter regs_info. Adjust to use it. (linux_fetch_registers): Get the current inferior's regs_info, and adjust to use it. (linux_store_registers): Ditto. [HAVE_LINUX_REGSETS] (initialize_regsets_info): New. (initialize_low): Don't initialize the target_regsets here. Call initialize_low_arch. * linux-low.h (target_regsets): Delete declaration. (struct regsets_info): New. (struct usrregs_info): New. (struct regs_info): New. (struct process_info_private) <new_inferior>: New field. (struct linux_target_ops): Delete the num_regs, regmap, and regset_bitmap fields. New field regs_info. [HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare. * i387-fp.c (num_xmm_registers): Delete. (i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno calls to new interface. (i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache) (i387_xsave_to_cache): Adjust find_regno calls to new interface. Infer the number of xmm registers from the regcache's target description. * i387-fp.h (num_xmm_registers): Delete. * inferiors.c (add_thread): Don't install the thread's regcache here. * proc-service.c (gregset_info): Fetch the current inferior's regs_info. Adjust to use it. * regcache.c: Include tdesc.h. (register_bytes, reg_defs, num_registers) (gdbserver_expedite_regs): Delete. (get_thread_regcache): If the thread doesn't have a regcache yet, create one, instead of aborting gdbserver. (regcache_invalidate_one): Rename to ... (regcache_invalidate_thread): ... this. (regcache_invalidate_one): New. (regcache_invalidate): Only invalidate registers of the current process. (init_register_cache): Add target_desc parameter, and use it. (new_register_cache): Ditto. Assert the target description has a non zero registers_size. (regcache_cpy): Add assertions. Adjust. (realloc_register_cache, set_register_cache): Delete. (registers_to_string, registers_from_string): Adjust. (find_register_by_name, find_regno, find_register_by_number) (register_cache_size): Add target_desc parameter, and use it. (free_register_cache_thread, free_register_cache_thread_one) (regcache_release, register_cache_size): New. (register_size): Add target_desc parameter, and use it. (register_data, supply_register, supply_register_zeroed) (supply_regblock, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Adjust. * regcache.h (struct target_desc): Forward declare. (struct regcache) <tdesc>: New field. (init_register_cache, new_register_cache): Add target_desc parameter. (regcache_invalidate_thread): Declare. (regcache_invalidate_one): Delete declaration. (regcache_release): Declare. (find_register_by_number, register_cache_size, register_size) (find_regno): Add target_desc parameter. (gdbserver_expedite_regs, gdbserver_xmltarget): Delete declarations. * remote-utils.c: Include tdesc.h. (outreg, prepare_resume_reply): Adjust. * server.c: Include tdesc.h. (gdbserver_xmltarget): Delete declaration. (get_features_xml, process_serial_event): Adjust. * server.h [IN_PROCESS_AGENT] (struct target_desc): Forward declare. (struct process_info) <tdesc>: New field. (ipa_tdesc): Declare. * tdesc.c: New file. * tdesc.h: New file. * tracepoint.c: Include tdesc.h. [IN_PROCESS_AGENT] (ipa_tdesc): Define. (get_context_regcache): Adjust to pass ipa_tdesc down. (do_action_at_tracepoint): Adjust to get the register cache size from the context regcache's description. (traceframe_walk_blocks): Adjust to get the register cache size from the current trace frame's description. (traceframe_get_pc): Adjust to get current trace frame's description and pass it down. (gdb_collect): Adjust to get the register cache size from the IPA's description. * linux-amd64-ipa.c (tdesc_amd64_linux): Declare. (gdbserver_xmltarget): Delete. (initialize_low_tracepoint): Set the ipa's target description. * linux-i386-ipa.c (tdesc_i386_linux): Declare. (initialize_low_tracepoint): Set the ipa's target description. * linux-x86-low.c: Include tdesc.h. [__x86_64__] (is_64bit_tdesc): New. (ps_get_thread_area, x86_get_thread_area): Use it. (i386_cannot_store_register): Rename to ... (x86_cannot_store_register): ... this. Use is_64bit_tdesc. (i386_cannot_fetch_register): Rename to ... (x86_cannot_fetch_register): ... this. Use is_64bit_tdesc. (x86_fill_gregset, x86_store_gregset): Adjust register_size calls to new interface. (target_regsets): Rename to ... (x86_regsets): ... this. (x86_get_pc, x86_set_pc): Adjust register_size calls to new interface. (x86_siginfo_fixup): Use is_64bit_tdesc. [__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux) (tdesc_x32_avx_linux, tdesc_x32_linux) (tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux): Declare. (x86_linux_update_xmltarget): Delete. (I386_LINUX_XSAVE_XCR0_OFFSET): Define. (have_ptrace_getfpxregs, have_ptrace_getregset): New. (AMD64_LINUX_USER64_CS): New. (x86_linux_read_description): New, based on x86_linux_update_xmltarget. (same_process_callback): New. (x86_arch_setup_process_callback): New. (x86_linux_update_xmltarget): New. (x86_regsets_info): New. (amd64_linux_regs_info): New. (i386_linux_usrregs_info): New. (i386_linux_regs_info): New. (x86_linux_regs_info): New. (x86_arch_setup): Reimplement. (x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc. (x86_emit_ops): Ditto. (the_low_target): Adjust. Install x86_linux_regs_info, x86_cannot_fetch_register, and x86_cannot_store_register. (initialize_low_arch): New. * linux-ia64-low.c (tdesc_ia64): Declare. (ia64_fetch_register): Adjust. (ia64_usrregs_info, regs_info): New globals. (ia64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sparc-low.c (tdesc_sparc64): Declare. (sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack): Adjust. (sparc_arch_setup): New function. (sparc_regsets_info, sparc_usrregs_info, regs_info): New globals. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l) (tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l) (tdesc_powerpc_64l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx64l): Declare. (ppc_cannot_store_register, ppc_collect_ptrace_register) (ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc) (ppc_set_pc, ppc_get_hwcap): Adjust. (ppc_usrregs_info): Forward declare. (!__powerpc64__) ppc_regmap_adjusted: New global. (ppc_arch_setup): Adjust to the current process'es target description. (ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset) (ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse) (ppc_store_evrregset): Adjust. (target_regsets): Rename to ... (ppc_regsets): ... this, and make static. (ppc_usrregs_info, ppc_regsets_info, regs_info): New globals. (ppc_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1) (tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1) (tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1) (tdesc_s390x_linux64v2): Declare. (s390_collect_ptrace_register, s390_supply_ptrace_register) (s390_fill_gregset, s390_store_last_break): Adjust. (target_regsets): Rename to ... (s390_regsets): ... this, and make static. (s390_get_pc, s390_set_pc): Adjust. (s390_get_hwcap): New target_desc parameter, and use it. [__s390x__] (have_hwcap_s390_high_gprs): New global. (s390_arch_setup): Adjust to set the current process'es target description. Don't adjust the regmap. (s390_usrregs_info, s390_regsets_info, regs_info): New globals. [__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264) (regs_info_3264): New globals. (s390_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux) (tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare. [__mips64] (init_registers_mips_linux) (init_registers_mips_dsp_linux): Delete defines. [__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines. (have_dsp): New global. (mips_read_description): New, based on mips_arch_setup. (mips_arch_setup): Reimplement. (get_usrregs_info): New function. (mips_cannot_fetch_register, mips_cannot_store_register) (mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset) (mips_fill_fpregset, mips_store_fpregset): Adjust. (target_regsets): Rename to ... (mips_regsets): ... this, and make static. (mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info) (dsp_regs_info, regs_info): New globals. (mips_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt) (tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (arm_fill_vfpregset, arm_store_vfpregset): Adjust. (arm_read_description): New, with bits factored from arm_arch_setup. (arm_arch_setup): Reimplement. (target_regsets): Rename to ... (arm_regsets): ... this, and make static. (arm_regsets_info, arm_usrregs_info, regs_info): New globals. (arm_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m68k-low.c (tdesc_m68k): Declare. (target_regsets): Rename to ... (m68k_regsets): ... this, and make static. (m68k_regsets_info, m68k_usrregs_info, regs_info): New globals. (m68k_regs_info): New function. (m68k_arch_setup): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sh-low.c (tdesc_sharch): Declare. (target_regsets): Rename to ... (sh_regsets): ... this, and make static. (sh_regsets_info, sh_usrregs_info, regs_info): New globals. (sh_regs_info, sh_arch_setup): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-bfin-low.c (tdesc_bfin): Declare. (bfin_arch_setup): New function. (bfin_usrregs_info, regs_info): New globals. (bfin_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_cris): Declare. (cris_arch_setup): New function. (cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_crisv32): Declare. (cris_arch_setup): New function. (cris_regsets_info, cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m32r-low.c (tdesc_m32r): Declare. (m32r_arch_setup): New function. (m32r_usrregs_info, regs_info): New globals. (m32r_regs_info): Adjust. (initialize_low_arch): New function. * linux-tic6x-low.c (tdesc_tic6x_c64xp_linux) (tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare. (tic6x_usrregs_info): Forward declare. (tic6x_read_description): New function, based on ... (tic6x_arch_setup): ... this. Reimplement. (target_regsets): Rename to ... (tic6x_regsets): ... this, and make static. (tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals. (tic6x_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-xtensa-low.c (tdesc_xtensa): Declare. (xtensa_fill_gregset, xtensa_store_gregset): Adjust. (target_regsets): Rename to ... (xtensa_regsets): ... this, and make static. (xtensa_regsets_info, xtensa_usrregs_info, regs_info): New globals. (xtensa_arch_setup, xtensa_regs_info): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-nios2-low.c (tdesc_nios2_linux): Declare. (nios2_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (nios2_regsets): ... this. (nios2_regsets_info, nios2_usrregs_info, regs_info): New globals. (nios2_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-aarch64-low.c (tdesc_aarch64): Declare. (aarch64_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (aarch64_regsets): ... this. (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals. (aarch64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare globals. (target_regsets): Rename to ... (tile_regsets): ... this. (tile_regsets_info, tile_usrregs_info, regs_info): New globals. (tile_regs_info): New function. (tile_arch_setup): Set the current process'es tdesc. (the_low_target): Adjust. (initialize_low_arch): New function. * spu-low.c (tdesc_spu): Declare. (spu_create_inferior, spu_attach): Set the new process'es tdesc. * win32-arm-low.c (tdesc_arm): Declare. (arm_arch_setup): New function. (the_low_target): Install arm_arch_setup instead of init_registers_arm. * win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare. (init_windows_x86): Rename to ... (i386_arch_setup): ... this. Set `win32_tdesc'. (the_low_target): Adjust. * win32-low.c (win32_tdesc): New global. (child_add_thread): Don't create the thread cache here. (do_initial_child_stuff): Set the new process'es tdesc. * win32-low.h (struct target_desc): Forward declare. (win32_tdesc): Declare. * lynx-i386-low.c (tdesc_i386): Declare global. (lynx_i386_arch_setup): Set `lynx_tdesc'. * lynx-low.c (lynx_tdesc): New global. (lynx_add_process): Set the new process'es tdesc. * lynx-low.h (struct target_desc): Forward declare. (lynx_tdesc): Declare global. * lynx-ppc-low.c (tdesc_powerpc_32): Declare global. (lynx_ppc_arch_setup): Set `lynx_tdesc'. * nto-low.c (nto_tdesc): New global. (do_attach): Set the new process'es tdesc. * nto-low.h (struct target_desc): Forward declare. (nto_tdesc): Declare. * nto-x86-low.c (tdesc_i386): Declare. (nto_x86_arch_setup): Set `nto_tdesc'. gdb/ 2013-06-07 Pedro Alves <palves@redhat.com> * regformats/regdat.sh: Output #include tdesc.h. Make globals static. Output a global target description pointer. (init_registers_${name}): Adjust to initialize a target description structure.
2013-06-07 12:46:59 +02:00
if (regsets_info->regsets[i].type == GENERAL_REGS)
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
break;
i++;
}
[GDBserver] Multi-process + multi-arch This patch makes GDBserver support multi-process + biarch. Currently, if you're debugging more than one process at once with a single gdbserver (in extended-remote mode), then all processes must have the same architecture (e.g., 64-bit vs 32-bit). Otherwise, you see this: Added inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] Reading symbols from /home/pedro/gdb/tests/main32...done. Temporary breakpoint 2 at 0x4004cf: main. (2 locations) Starting program: /home/pedro/gdb/tests/main32 warning: Selected architecture i386 is not compatible with reported target architecture i386:x86-64 warning: Architecture rejected target-supplied description Remote 'g' packet reply is too long: 000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000090cfffff0000000000000000000000000000000000000000000000000000000000020000000000000000000000000000000000000000000000000000000000000000000000000000b042f7460000000000020000230000002b0000002b0000002b000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000007f03000000000000ffff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000801f00003b0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 ... etc, etc ... Even though the process was running a 32-bit program, GDBserver sent back to GDB a register set in 64-bit layout. A patch (http://sourceware.org/ml/gdb-patches/2012-11/msg00228.html) a while ago made GDB track a target_gdbarch per inferior, and as consequence, fetch a target description per-inferior. This patch is the GDBserver counterpart, that makes GDBserver keep track of each process'es XML target description and register layout. So in the example above, GDBserver will send the correct register set in 32-bit layout to GDB. A new "struct target_desc" object (tdesc for short) is added, that holds the target description and register layout information about each process. Each `struct process_info' holds a pointer to a target description. The regcache also gains a pointer to a target description, mainly for convenience, and parallel with GDB (and possible future support for programs that flip processor modes). The low target's arch_setup routines are responsible for setting the process'es correct tdesc. This isn't that much different to how things were done before, except that instead of detecting the inferior process'es architecture and calling the corresponding init_registers_FOO routine, which would change the regcache layout globals and recreate the threads' regcaches, the regcache.c globals are gone, and the init_registers_$BAR routines now each initialize a separate global struct target_desc object (one for each arch variant GDBserver supports), and so all the init_registers_$BAR routines that are built into GDBserver are called early at GDBserver startup time (similarly to how GDB handles its built-in target descriptions), and then the arch_setup routine is responsible for making process_info->tdesc point to one of these target description globals. The regcache module is all parameterized to get the regcache's layout from the tdesc object instead of the old register_bytes, etc. globals. The threads' regcaches are now created lazily. The old scheme where we created each of them when we added a new thread doesn't work anymore, because we add the main thread/lwp before we see it stop for the first time, and it is only when we see the thread stop for the first time that we have a chance of determining the inferior's architecture (through the_low_target.arch_setup). Therefore when we add the main thread we don't know which architecture/tdesc its regcache should have. This patch makes the gdb.multi/multi-arch.exp test now pass against (extended-remote) GDBserver. It currently fails, without this patch. The IPA also uses the regcache, so it gains a new global struct target_desc pointer, which points at the description of the process it is loaded in. Re. the linux-low.c & friends changes. Since the register map etc. may differ between processes (64-bit vs 32-bit) etc., the linux_target_ops num_regs, regmap and regset_bitmap data fields are no longer sufficient. A new method is added in their place that returns a pointer to a new struct that includes all info linux-low.c needs to access registers of the current inferior. The patch/discussion that originally introduced linux-low.c:disabled_regsets mentions that the disabled_regsets set may be different per mode (in a biarch setup), and indeed that is cleared whenever we start a new (first) inferior, so that global is moved as well behind the new `struct regs_info'. On the x86 side: I simply replaced the i387-fp.c:num_xmm_registers global with a check for 64-bit or 32-bit process, which is equivalent to how the global was set. This avoided coming up with some more general mechanism that would work for all targets that use this module (GNU/Linux, Windows, etc.). Tested: GNU/Linux IA64 GNU/Linux MIPS64 GNU/Linux PowerPC (Fedora 16) GNU/Linux s390x (Fedora 16) GNU/Linux sparc64 (Debian) GNU/Linux x86_64, -m64 and -m32 (Fedora 17) Cross built, and smoke tested: i686-w64-mingw32, under Wine. GNU/Linux TI C6x, by Yao Qi. Cross built but otherwise not tested: aarch64-linux-gnu arm-linux-gnu m68k-linux nios2-linux-gnu sh-linux-gnu spu tilegx-unknown-linux-gnu Completely untested: GNU/Linux Blackfin GNU/Linux CRIS GNU/Linux CRISv32 GNU/Linux TI Xtensa GNU/Linux M32R LynxOS QNX NTO gdb/gdbserver/ 2013-06-07 Pedro Alves <palves@redhat.com> * Makefile.in (OBS): Add tdesc.o. (IPA_OBJS): Add tdesc-ipa.o. (tdesc-ipa.o): New rule. * ax.c (gdb_eval_agent_expr): Adjust register_size call to new interface. * linux-low.c (new_inferior): Delete. (disabled_regsets, num_regsets): Delete. (linux_add_process): Adjust to set the new per-process new_inferior flag. (linux_detach_one_lwp): Adjust to call regcache_invalidate_thread. (linux_wait_for_lwp): Adjust. Only call arch_setup if the event was a stop. When calling arch_setup, switch the current inferior to the thread that got an event. (linux_resume_one_lwp): Adjust to call regcache_invalidate_thread. (regsets_fetch_inferior_registers) (regsets_store_inferior_registers): New regsets_info parameter. Adjust to use it. (linux_register_in_regsets): New regs_info parameter. Adjust to use it. (register_addr, fetch_register, store_register): New usrregs_info parameter. Adjust to use it. (usr_fetch_inferior_registers, usr_store_inferior_registers): New parameter regs_info. Adjust to use it. (linux_fetch_registers): Get the current inferior's regs_info, and adjust to use it. (linux_store_registers): Ditto. [HAVE_LINUX_REGSETS] (initialize_regsets_info): New. (initialize_low): Don't initialize the target_regsets here. Call initialize_low_arch. * linux-low.h (target_regsets): Delete declaration. (struct regsets_info): New. (struct usrregs_info): New. (struct regs_info): New. (struct process_info_private) <new_inferior>: New field. (struct linux_target_ops): Delete the num_regs, regmap, and regset_bitmap fields. New field regs_info. [HAVE_LINUX_REGSETS] (initialize_regsets_info): Declare. * i387-fp.c (num_xmm_registers): Delete. (i387_cache_to_fsave, i387_fsave_to_cache): Adjust find_regno calls to new interface. (i387_cache_to_fxsave, i387_cache_to_xsave, i387_fxsave_to_cache) (i387_xsave_to_cache): Adjust find_regno calls to new interface. Infer the number of xmm registers from the regcache's target description. * i387-fp.h (num_xmm_registers): Delete. * inferiors.c (add_thread): Don't install the thread's regcache here. * proc-service.c (gregset_info): Fetch the current inferior's regs_info. Adjust to use it. * regcache.c: Include tdesc.h. (register_bytes, reg_defs, num_registers) (gdbserver_expedite_regs): Delete. (get_thread_regcache): If the thread doesn't have a regcache yet, create one, instead of aborting gdbserver. (regcache_invalidate_one): Rename to ... (regcache_invalidate_thread): ... this. (regcache_invalidate_one): New. (regcache_invalidate): Only invalidate registers of the current process. (init_register_cache): Add target_desc parameter, and use it. (new_register_cache): Ditto. Assert the target description has a non zero registers_size. (regcache_cpy): Add assertions. Adjust. (realloc_register_cache, set_register_cache): Delete. (registers_to_string, registers_from_string): Adjust. (find_register_by_name, find_regno, find_register_by_number) (register_cache_size): Add target_desc parameter, and use it. (free_register_cache_thread, free_register_cache_thread_one) (regcache_release, register_cache_size): New. (register_size): Add target_desc parameter, and use it. (register_data, supply_register, supply_register_zeroed) (supply_regblock, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Adjust. * regcache.h (struct target_desc): Forward declare. (struct regcache) <tdesc>: New field. (init_register_cache, new_register_cache): Add target_desc parameter. (regcache_invalidate_thread): Declare. (regcache_invalidate_one): Delete declaration. (regcache_release): Declare. (find_register_by_number, register_cache_size, register_size) (find_regno): Add target_desc parameter. (gdbserver_expedite_regs, gdbserver_xmltarget): Delete declarations. * remote-utils.c: Include tdesc.h. (outreg, prepare_resume_reply): Adjust. * server.c: Include tdesc.h. (gdbserver_xmltarget): Delete declaration. (get_features_xml, process_serial_event): Adjust. * server.h [IN_PROCESS_AGENT] (struct target_desc): Forward declare. (struct process_info) <tdesc>: New field. (ipa_tdesc): Declare. * tdesc.c: New file. * tdesc.h: New file. * tracepoint.c: Include tdesc.h. [IN_PROCESS_AGENT] (ipa_tdesc): Define. (get_context_regcache): Adjust to pass ipa_tdesc down. (do_action_at_tracepoint): Adjust to get the register cache size from the context regcache's description. (traceframe_walk_blocks): Adjust to get the register cache size from the current trace frame's description. (traceframe_get_pc): Adjust to get current trace frame's description and pass it down. (gdb_collect): Adjust to get the register cache size from the IPA's description. * linux-amd64-ipa.c (tdesc_amd64_linux): Declare. (gdbserver_xmltarget): Delete. (initialize_low_tracepoint): Set the ipa's target description. * linux-i386-ipa.c (tdesc_i386_linux): Declare. (initialize_low_tracepoint): Set the ipa's target description. * linux-x86-low.c: Include tdesc.h. [__x86_64__] (is_64bit_tdesc): New. (ps_get_thread_area, x86_get_thread_area): Use it. (i386_cannot_store_register): Rename to ... (x86_cannot_store_register): ... this. Use is_64bit_tdesc. (i386_cannot_fetch_register): Rename to ... (x86_cannot_fetch_register): ... this. Use is_64bit_tdesc. (x86_fill_gregset, x86_store_gregset): Adjust register_size calls to new interface. (target_regsets): Rename to ... (x86_regsets): ... this. (x86_get_pc, x86_set_pc): Adjust register_size calls to new interface. (x86_siginfo_fixup): Use is_64bit_tdesc. [__x86_64__] (tdesc_amd64_linux, tdesc_amd64_avx_linux) (tdesc_x32_avx_linux, tdesc_x32_linux) (tdesc_i386_linux, tdesc_i386_mmx_linux, tdesc_i386_avx_linux): Declare. (x86_linux_update_xmltarget): Delete. (I386_LINUX_XSAVE_XCR0_OFFSET): Define. (have_ptrace_getfpxregs, have_ptrace_getregset): New. (AMD64_LINUX_USER64_CS): New. (x86_linux_read_description): New, based on x86_linux_update_xmltarget. (same_process_callback): New. (x86_arch_setup_process_callback): New. (x86_linux_update_xmltarget): New. (x86_regsets_info): New. (amd64_linux_regs_info): New. (i386_linux_usrregs_info): New. (i386_linux_regs_info): New. (x86_linux_regs_info): New. (x86_arch_setup): Reimplement. (x86_install_fast_tracepoint_jump_pad): Use is_64bit_tdesc. (x86_emit_ops): Ditto. (the_low_target): Adjust. Install x86_linux_regs_info, x86_cannot_fetch_register, and x86_cannot_store_register. (initialize_low_arch): New. * linux-ia64-low.c (tdesc_ia64): Declare. (ia64_fetch_register): Adjust. (ia64_usrregs_info, regs_info): New globals. (ia64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sparc-low.c (tdesc_sparc64): Declare. (sparc_fill_gregset_to_stack, sparc_store_gregset_from_stack): Adjust. (sparc_arch_setup): New function. (sparc_regsets_info, sparc_usrregs_info, regs_info): New globals. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-ppc-low.c (tdesc_powerpc_32l, tdesc_powerpc_altivec32l) (tdesc_powerpc_cell32l, tdesc_powerpc_vsx32l) (tdesc_powerpc_isa205_32l, tdesc_powerpc_isa205_altivec32l) (tdesc_powerpc_isa205_vsx32l, tdesc_powerpc_e500l) (tdesc_powerpc_64l, tdesc_powerpc_altivec64l) (tdesc_powerpc_cell64l, tdesc_powerpc_vsx64l) (tdesc_powerpc_isa205_64l, tdesc_powerpc_isa205_altivec64l) (tdesc_powerpc_isa205_vsx64l): Declare. (ppc_cannot_store_register, ppc_collect_ptrace_register) (ppc_supply_ptrace_register, parse_spufs_run, ppc_get_pc) (ppc_set_pc, ppc_get_hwcap): Adjust. (ppc_usrregs_info): Forward declare. (!__powerpc64__) ppc_regmap_adjusted: New global. (ppc_arch_setup): Adjust to the current process'es target description. (ppc_fill_vsxregset, ppc_store_vsxregset, ppc_fill_vrregset) (ppc_store_vrregset, ppc_fill_evrregset, ppc_store_evrregse) (ppc_store_evrregset): Adjust. (target_regsets): Rename to ... (ppc_regsets): ... this, and make static. (ppc_usrregs_info, ppc_regsets_info, regs_info): New globals. (ppc_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-s390-low.c (tdesc_s390_linux32, tdesc_s390_linux32v1) (tdesc_s390_linux32v2, tdesc_s390_linux64, tdesc_s390_linux64v1) (tdesc_s390_linux64v2, tdesc_s390x_linux64, tdesc_s390x_linux64v1) (tdesc_s390x_linux64v2): Declare. (s390_collect_ptrace_register, s390_supply_ptrace_register) (s390_fill_gregset, s390_store_last_break): Adjust. (target_regsets): Rename to ... (s390_regsets): ... this, and make static. (s390_get_pc, s390_set_pc): Adjust. (s390_get_hwcap): New target_desc parameter, and use it. [__s390x__] (have_hwcap_s390_high_gprs): New global. (s390_arch_setup): Adjust to set the current process'es target description. Don't adjust the regmap. (s390_usrregs_info, s390_regsets_info, regs_info): New globals. [__s390x__] (s390_usrregs_info_3264, s390_regsets_info_3264) (regs_info_3264): New globals. (s390_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-mips-low.c (tdesc_mips_linux, tdesc_mips_dsp_linux) (tdesc_mips64_linux, tdesc_mips64_dsp_linux): Declare. [__mips64] (init_registers_mips_linux) (init_registers_mips_dsp_linux): Delete defines. [__mips64] (tdesc_mips_linux, tdesc_mips_dsp_linux): New defines. (have_dsp): New global. (mips_read_description): New, based on mips_arch_setup. (mips_arch_setup): Reimplement. (get_usrregs_info): New function. (mips_cannot_fetch_register, mips_cannot_store_register) (mips_get_pc, mips_set_pc, mips_fill_gregset, mips_store_gregset) (mips_fill_fpregset, mips_store_fpregset): Adjust. (target_regsets): Rename to ... (mips_regsets): ... this, and make static. (mips_regsets_info, mips_dsp_usrregs_info, mips_usrregs_info) (dsp_regs_info, regs_info): New globals. (mips_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-arm-low.c (tdesc_arm, tdesc_arm_with_iwmmxt) (tdesc_arm_with_vfpv2, tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare. (arm_fill_vfpregset, arm_store_vfpregset): Adjust. (arm_read_description): New, with bits factored from arm_arch_setup. (arm_arch_setup): Reimplement. (target_regsets): Rename to ... (arm_regsets): ... this, and make static. (arm_regsets_info, arm_usrregs_info, regs_info): New globals. (arm_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m68k-low.c (tdesc_m68k): Declare. (target_regsets): Rename to ... (m68k_regsets): ... this, and make static. (m68k_regsets_info, m68k_usrregs_info, regs_info): New globals. (m68k_regs_info): New function. (m68k_arch_setup): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-sh-low.c (tdesc_sharch): Declare. (target_regsets): Rename to ... (sh_regsets): ... this, and make static. (sh_regsets_info, sh_usrregs_info, regs_info): New globals. (sh_regs_info, sh_arch_setup): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-bfin-low.c (tdesc_bfin): Declare. (bfin_arch_setup): New function. (bfin_usrregs_info, regs_info): New globals. (bfin_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_cris): Declare. (cris_arch_setup): New function. (cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-cris-low.c (tdesc_crisv32): Declare. (cris_arch_setup): New function. (cris_regsets_info, cris_usrregs_info, regs_info): New globals. (cris_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-m32r-low.c (tdesc_m32r): Declare. (m32r_arch_setup): New function. (m32r_usrregs_info, regs_info): New globals. (m32r_regs_info): Adjust. (initialize_low_arch): New function. * linux-tic6x-low.c (tdesc_tic6x_c64xp_linux) (tdesc_tic6x_c64x_linux, tdesc_tic6x_c62x_linux): Declare. (tic6x_usrregs_info): Forward declare. (tic6x_read_description): New function, based on ... (tic6x_arch_setup): ... this. Reimplement. (target_regsets): Rename to ... (tic6x_regsets): ... this, and make static. (tic6x_regsets_info, tic6x_usrregs_info, regs_info): New globals. (tic6x_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-xtensa-low.c (tdesc_xtensa): Declare. (xtensa_fill_gregset, xtensa_store_gregset): Adjust. (target_regsets): Rename to ... (xtensa_regsets): ... this, and make static. (xtensa_regsets_info, xtensa_usrregs_info, regs_info): New globals. (xtensa_arch_setup, xtensa_regs_info): New functions. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-nios2-low.c (tdesc_nios2_linux): Declare. (nios2_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (nios2_regsets): ... this. (nios2_regsets_info, nios2_usrregs_info, regs_info): New globals. (nios2_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-aarch64-low.c (tdesc_aarch64): Declare. (aarch64_arch_setup): Set the current process'es tdesc. (target_regsets): Rename to ... (aarch64_regsets): ... this. (aarch64_regsets_info, aarch64_usrregs_info, regs_info): New globals. (aarch64_regs_info): New function. (the_low_target): Adjust. (initialize_low_arch): New function. * linux-tile-low.c (tdesc_tilegx, tdesc_tilegx32): Declare globals. (target_regsets): Rename to ... (tile_regsets): ... this. (tile_regsets_info, tile_usrregs_info, regs_info): New globals. (tile_regs_info): New function. (tile_arch_setup): Set the current process'es tdesc. (the_low_target): Adjust. (initialize_low_arch): New function. * spu-low.c (tdesc_spu): Declare. (spu_create_inferior, spu_attach): Set the new process'es tdesc. * win32-arm-low.c (tdesc_arm): Declare. (arm_arch_setup): New function. (the_low_target): Install arm_arch_setup instead of init_registers_arm. * win32-i386-low.c (tdesc_i386, tdesc_amd64): Declare. (init_windows_x86): Rename to ... (i386_arch_setup): ... this. Set `win32_tdesc'. (the_low_target): Adjust. * win32-low.c (win32_tdesc): New global. (child_add_thread): Don't create the thread cache here. (do_initial_child_stuff): Set the new process'es tdesc. * win32-low.h (struct target_desc): Forward declare. (win32_tdesc): Declare. * lynx-i386-low.c (tdesc_i386): Declare global. (lynx_i386_arch_setup): Set `lynx_tdesc'. * lynx-low.c (lynx_tdesc): New global. (lynx_add_process): Set the new process'es tdesc. * lynx-low.h (struct target_desc): Forward declare. (lynx_tdesc): Declare global. * lynx-ppc-low.c (tdesc_powerpc_32): Declare global. (lynx_ppc_arch_setup): Set `lynx_tdesc'. * nto-low.c (nto_tdesc): New global. (do_attach): Set the new process'es tdesc. * nto-low.h (struct target_desc): Forward declare. (nto_tdesc): Declare. * nto-x86-low.c (tdesc_i386): Declare. (nto_x86_arch_setup): Set `nto_tdesc'. gdb/ 2013-06-07 Pedro Alves <palves@redhat.com> * regformats/regdat.sh: Output #include tdesc.h. Make globals static. Output a global target description pointer. (init_registers_${name}): Adjust to initialize a target description structure.
2013-06-07 12:46:59 +02:00
return &regsets_info->regsets[i];
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
}
#endif
/* Search for the symbol named NAME within the object named OBJ within
the target process PH. If the symbol is found the address of the
symbol is stored in SYM_ADDR. */
ps_err_e
ps_pglobal_lookup (gdb_ps_prochandle_t ph, const char *obj,
const char *name, psaddr_t *sym_addr)
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
{
CORE_ADDR addr;
if (thread_db_look_up_one_symbol (name, &addr) == 0)
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
return PS_NOSYM;
*sym_addr = (psaddr_t) (unsigned long) addr;
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
return PS_OK;
}
/* Read SIZE bytes from the target process PH at address ADDR and copy
them into BUF. */
ps_err_e
ps_pdread (gdb_ps_prochandle_t ph, psaddr_t addr,
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
gdb_ps_read_buf_t buf, gdb_ps_size_t size)
{
if (read_inferior_memory ((uintptr_t) addr, (gdb_byte *) buf, size) != 0)
return PS_ERR;
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
return PS_OK;
}
/* Write SIZE bytes from BUF into the target process PH at address ADDR. */
ps_err_e
ps_pdwrite (gdb_ps_prochandle_t ph, psaddr_t addr,
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
gdb_ps_write_buf_t buf, gdb_ps_size_t size)
{
Replace write_inferior_memory with target_write_memory target_write_memory is just a simple wrapper for write_inferior_memory. Because target_write_memory is needed for gdbsupport, and because gdb uses the name "target_write_memory" everywhere, this patch renames write_inferior_memory and removes the wrapper. I think this brings gdb and gdbserver slightly more in sync. gdb/gdbserver/ChangeLog 2019-08-15 Tom Tromey <tromey@adacore.com> * tracepoint.c (write_inferior_data_pointer) (write_inferior_integer, write_inferior_int8) (write_inferior_uinteger, m_tracepoint_action_download) (r_tracepoint_action_download, x_tracepoint_action_download) (l_tracepoint_action_download, clear_inferior_trace_buffer) (download_agent_expr, download_tracepoint_1) (download_trace_state_variables, upload_fast_traceframes): Update. * server.c (gdb_write_memory): Update. * remote-utils.c (relocate_instruction): Update. * proc-service.c (ps_pdwrite): Update. * mem-break.c (remove_memory_breakpoint) (delete_fast_tracepoint_jump, set_fast_tracepoint_jump) (uninsert_fast_tracepoint_jumps_at) (reinsert_fast_tracepoint_jumps_at): Update. * linux-x86-low.c (append_insns) (i386_install_fast_tracepoint_jump_pad) (amd64_write_goto_address, i386_write_goto_address): Update. * linux-s390-low.c (append_insns, s390_write_goto_address): Update. * linux-ppc-low.c (ppc_relocate_instruction) (ppc_install_fast_tracepoint_jump_pad, emit_insns) (ppc_write_goto_address): Update. * linux-aarch64-low.c (append_insns): Update. * target.h (struct target_ops): Update. (write_inferior_memory): Don't declare. * target.c (target_write_memory): Rename from write_inferior_memory. Remove old target_write_memory.
2019-08-14 17:18:21 +02:00
if (target_write_memory ((uintptr_t) addr, (const gdb_byte *) buf, size)
!= 0)
return PS_ERR;
return PS_OK;
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
}
/* Get the general registers of LWP LWPID within the target process PH
and store them in GREGSET. */
ps_err_e
ps_lgetregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, prgregset_t gregset)
{
#ifdef HAVE_REGSETS
Rename "process" to "lwp" throughout. * linux-low.c (all_processes): Rename to... (all_lwps): ... this. (inferior_pid, handle_extended_wait, get_stop_pc): Adjust. (add_process): Rename to ... (add_lwp): ... this. Adjust. (linux_create_inferior): Adjust. (linux_attach_lwp): Adjust. (linux_attach): Adjust. (linux_kill_one_process): Rename to ... (linux_kill_one_lwp): ... this. Adjust. (linux_kill): Adjust. (linux_detach_one_process): Rename to ... (linux_detach_one_lwp): ... this. Adjust. (linux_detach): Adjust. (check_removed_breakpoint): Adjust. (status_pending_p): Adjust. (linux_wait_for_process): Rename to ... (linux_wait_for_lwp): ... this. Adjust. (linux_wait_for_event): Adjust. (send_sigstop): Adjust. (wait_for_sigstop): Adjust. (stop_all_processes): Rename to ... (stop_all_lwps): ... this. (linux_resume_one_process): Rename to ... (linux_resume_one_lwp): ... this. Adjust. (linux_set_resume_request, linux_continue_one_thread) (linux_queue_one_thread, resume_status_pending_p) (usr_store_inferior_registers, regsets_store_inferior_registers) (linux_request_interrupt, linux_read_offsets, linux_xfer_siginfo): Adjust. * linux-low.h (get_process): Rename to ... (get_lwp): ... this. Adjust. (get_thread_process): Rename to ... (get_thread_lwp): ... this. Adjust. (get_process_thread): Rename to ... (get_lwp_thread): ... this. Adjust. (struct process_info): Rename to ... (struct lwp_info): ... this. (all_processes): Rename to ... (all_lwps): ... this. * proc-service.c (ps_lgetregs): Adjust. * thread-db.c (thread_db_create_event, find_one_thread) (maybe_attach_thread, thread_db_get_tls_address): Adjust.
2009-03-17 21:25:35 +01:00
struct lwp_info *lwp;
Rename current_inferior as current_thread in gdbserver GDB has a function named "current_inferior" and gdbserver has a global variable named "current_inferior", but the two are not equivalent; indeed, gdbserver does not have any real equivalent of what GDB calls an inferior. What gdbserver's "current_inferior" is actually pointing to is a structure describing the current thread. This commit renames current_inferior as current_thread in gdbserver to clarify this. It also renames the function "set_desired_inferior" to "set_desired_thread" and renames various local variables from foo_inferior to foo_thread. gdb/gdbserver/ChangeLog: * inferiors.h (current_inferior): Renamed as... (current_thread): New variable. All uses updated. * linux-low.c (get_pc): Renamed saved_inferior as saved_thread. (maybe_move_out_of_jump_pad): Likewise. (cancel_breakpoint): Likewise. (linux_low_filter_event): Likewise. (wait_for_sigstop): Likewise. (linux_resume_one_lwp): Likewise. (need_step_over_p): Likewise. (start_step_over): Likewise. (linux_stabilize_threads): Renamed save_inferior as saved_thread. * linux-x86-low.c (x86_linux_update_xmltarget): Likewise. * proc-service.c (ps_lgetregs): Renamed reg_inferior as reg_thread and save_inferior as saved_thread. * regcache.c (get_thread_regcache): Renamed saved_inferior as saved_thread. (regcache_invalidate_thread): Likewise. * remote-utils.c (prepare_resume_reply): Likewise. * thread-db.c (thread_db_get_tls_address): Likewise. (disable_thread_event_reporting): Likewise. (remove_thread_event_breakpoints): Likewise. * tracepoint.c (gdb_agent_about_to_close): Renamed save_inferior as saved_thread. * target.h (set_desired_inferior): Renamed as... (set_desired_thread): New declaration. All uses updated. * server.c (myresume): Updated comment to reference thread instead of inferior. (handle_serial_event): Likewise. (handle_target_event): Likewise.
2014-09-10 11:37:11 +02:00
struct thread_info *reg_thread, *saved_thread;
* regcache.h (struct thread_info): Forward declare. (struct regcache): New. (new_register_cache): Adjust prototype. (get_thread_regcache): Declare. (free_register_cache): Adjust prototype. (registers_to_string, registers_from_string): Ditto. (supply_register, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Ditto. * regcache.c (struct inferior_regcache_data): Delete. (get_regcache): Rename to ... (get_thread_regcache): ... this. Adjust. Switch inferior before fetching registers. (regcache_invalidate_one): Adjust. (regcache_invalidate): Fix prototype. (new_register_cache): Return the new register cache. (free_register_cache): Change prototype. (realloc_register_cache): Adjust. (registers_to_string): Change prototype to take a regcache. Adjust. (registers_from_string): Ditto. (register_data): Ditto. (supply_register): Ditto. (supply_register_by_name): Ditto. (collect_register): Ditto. (collect_register_as_string): Ditto. (collect_register_by_name): Ditto. * server.c (process_serial_event): Adjust. * linux-low.h (regset_fill_func, regset_store_func): Change prototype. (get_pc, set_pc, collect_ptrace_register, supply_ptrace_register): Change prototype. * linux-low.c (get_stop_pc): Adjust. (check_removed_breakpoint): Adjust. (linux_wait_for_event): Adjust. (linux_resume_one_lwp): Adjust. (fetch_register): Add regcache parameter. Adjust. (usr_store_inferior_registers): Ditto. (regsets_fetch_inferior_registers): Ditto. (regsets_store_inferior_registers): Ditto. (linux_fetch_registers, linux_store_registers): Ditto. * i387-fp.c (i387_cache_to_fsave): Change prototype to take a regcache. Adjust. (i387_fsave_to_cache, i387_cache_to_fxsave, i387_fxsave_to_cache): Ditto. * i387-fp.h (i387_cache_to_fsave, i387_fsave_to_cache): Change prototype to take a regcache. (i387_cache_to_fxsave, i387_fxsave_to_cache): Ditto. * remote-utils.c (convert_ascii_to_int, outreg) (prepare_resume_reply): Change prototype to take a regcache. Adjust. * target.h (struct target_ops) <fetch_registers, store_registers>: Change prototype to take a regcache. (fetch_inferior_registers, store_inferior_registers): Change prototype to take a regcache. Adjust. * proc-service.c (ps_lgetregs): Adjust. * linux-x86-low.c (x86_fill_gregset, x86_store_gregset) (x86_fill_fpregset, x86_store_fpregset, x86_fill_fpxregset) (x86_store_fpxregset, x86_get_pc, x86_set_pc): Change prototype to take a regcache. Adjust. * linux-arm-low.c (arm_fill_gregset, arm_store_gregset) (arm_fill_wmmxregset, arm_store_wmmxregset, arm_fill_vfpregset) (arm_store_vfpregset, arm_get_pc, arm_set_pc): (arm_breakpoint_at): Change prototype to take a regcache. Adjust. * linux-cris-low.c (cris_get_pc, cris_set_pc) (cris_cannot_fetch_register): (cris_breakpoint_at): Change prototype to take a regcache. Adjust. * linux-crisv32-low.c (cris_get_pc, cris_set_pc, cris_reinsert_addr, cris_write_data_breakpoint): Change prototype to take a regcache. Adjust. (cris_breakpoint_at, cris_insert_point, cris_remove_point): Adjust. * linux-m32r-low.c (m32r_get_pc, m32r_set_pc): Change prototype to take a regcache. Adjust. * linux-m68k-low.c (m68k_fill_gregset, m68k_store_gregset) (m68k_fill_fpregset, m68k_store_fpregset, m68k_get_pc, (m68k_set_pc): Change prototype to take a regcache. Adjust. * linux-mips-low.c (mips_get_pc): (mips_set_pc): Change prototype to take a regcache. Adjust. (mips_reinsert_addr): Adjust. (mips_collect_register): Change prototype to take a regcache. Adjust. (mips_supply_register): (mips_collect_register_32bit, mips_supply_register_32bit) (mips_fill_gregset, mips_store_gregset, mips_fill_fpregset) (mips_store_fpregset): Ditto. * linux-ppc-low.c (ppc_supply_ptrace_register, ppc_supply_ptrace_register): Ditto. (parse_spufs_run): Adjust. (ppc_get_pc, ppc_set_pc, ppc_fill_gregset, ppc_fill_vsxregset) (ppc_store_vsxregset, ppc_fill_vrregset, ppc_store_vrregset) (ppc_fill_evrregset, ppc_store_evrregset): Change prototype to take a regcache. Adjust. * linux-s390-low.c (s390_collect_ptrace_register) (s390_supply_ptrace_register, s390_fill_gregset, s390_get_pc) (s390_set_pc): Change prototype to take a regcache. Adjust. (s390_arch_setup): Adjust. * linux-sh-low.c (sh_get_pc, sh_breakpoint_at) (sh_fill_gregset): Change prototype to take a regcache. Adjust. * linux-sparc-low.c (sparc_fill_gregset_to_stack) (sparc_fill_gregset, sparc_store_gregset_from_stack) (sparc_store_gregset, sparc_get_pc): Change prototype to take a regcache. Adjust. (sparc_breakpoint_at): Adjust. * linux-xtensa-low.c (xtensa_fill_gregset): (xtensa_store_gregset): (xtensa_fill_xtregset, xtensa_store_xtregset, xtensa_get_pc) (xtensa_set_pc): Change prototype to take a regcache. Adjust. * nto-low.c (nto_fetch_registers, nto_store_registers): Change prototype to take a regcache. Adjust. * win32-arm-low.c (arm_fetch_inferior_register) (arm_store_inferior_register): Change prototype to take a regcache. Adjust. * win32-i386-low.c (i386_fetch_inferior_register) (i386_store_inferior_register): Change prototype to take a regcache. Adjust. * win32-low.c (child_fetch_inferior_registers) (child_store_inferior_registers): Change prototype to take a regcache. Adjust. (win32_wait): Adjust. (win32_fetch_inferior_registers): Change prototype to take a regcache. Adjust. (win32_store_inferior_registers): Adjust. * win32-low.h (struct win32_target_ops) <fetch_inferior_register, store_inferior_register>: Change prototype to take a regcache.
2010-01-20 23:55:38 +01:00
struct regcache *regcache;
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
lwp = find_lwp_pid (ptid_t (lwpid));
Rename "process" to "lwp" throughout. * linux-low.c (all_processes): Rename to... (all_lwps): ... this. (inferior_pid, handle_extended_wait, get_stop_pc): Adjust. (add_process): Rename to ... (add_lwp): ... this. Adjust. (linux_create_inferior): Adjust. (linux_attach_lwp): Adjust. (linux_attach): Adjust. (linux_kill_one_process): Rename to ... (linux_kill_one_lwp): ... this. Adjust. (linux_kill): Adjust. (linux_detach_one_process): Rename to ... (linux_detach_one_lwp): ... this. Adjust. (linux_detach): Adjust. (check_removed_breakpoint): Adjust. (status_pending_p): Adjust. (linux_wait_for_process): Rename to ... (linux_wait_for_lwp): ... this. Adjust. (linux_wait_for_event): Adjust. (send_sigstop): Adjust. (wait_for_sigstop): Adjust. (stop_all_processes): Rename to ... (stop_all_lwps): ... this. (linux_resume_one_process): Rename to ... (linux_resume_one_lwp): ... this. Adjust. (linux_set_resume_request, linux_continue_one_thread) (linux_queue_one_thread, resume_status_pending_p) (usr_store_inferior_registers, regsets_store_inferior_registers) (linux_request_interrupt, linux_read_offsets, linux_xfer_siginfo): Adjust. * linux-low.h (get_process): Rename to ... (get_lwp): ... this. Adjust. (get_thread_process): Rename to ... (get_thread_lwp): ... this. Adjust. (get_process_thread): Rename to ... (get_lwp_thread): ... this. Adjust. (struct process_info): Rename to ... (struct lwp_info): ... this. (all_processes): Rename to ... (all_lwps): ... this. * proc-service.c (ps_lgetregs): Adjust. * thread-db.c (thread_db_create_event, find_one_thread) (maybe_attach_thread, thread_db_get_tls_address): Adjust.
2009-03-17 21:25:35 +01:00
if (lwp == NULL)
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
return PS_ERR;
Rename current_inferior as current_thread in gdbserver GDB has a function named "current_inferior" and gdbserver has a global variable named "current_inferior", but the two are not equivalent; indeed, gdbserver does not have any real equivalent of what GDB calls an inferior. What gdbserver's "current_inferior" is actually pointing to is a structure describing the current thread. This commit renames current_inferior as current_thread in gdbserver to clarify this. It also renames the function "set_desired_inferior" to "set_desired_thread" and renames various local variables from foo_inferior to foo_thread. gdb/gdbserver/ChangeLog: * inferiors.h (current_inferior): Renamed as... (current_thread): New variable. All uses updated. * linux-low.c (get_pc): Renamed saved_inferior as saved_thread. (maybe_move_out_of_jump_pad): Likewise. (cancel_breakpoint): Likewise. (linux_low_filter_event): Likewise. (wait_for_sigstop): Likewise. (linux_resume_one_lwp): Likewise. (need_step_over_p): Likewise. (start_step_over): Likewise. (linux_stabilize_threads): Renamed save_inferior as saved_thread. * linux-x86-low.c (x86_linux_update_xmltarget): Likewise. * proc-service.c (ps_lgetregs): Renamed reg_inferior as reg_thread and save_inferior as saved_thread. * regcache.c (get_thread_regcache): Renamed saved_inferior as saved_thread. (regcache_invalidate_thread): Likewise. * remote-utils.c (prepare_resume_reply): Likewise. * thread-db.c (thread_db_get_tls_address): Likewise. (disable_thread_event_reporting): Likewise. (remove_thread_event_breakpoints): Likewise. * tracepoint.c (gdb_agent_about_to_close): Renamed save_inferior as saved_thread. * target.h (set_desired_inferior): Renamed as... (set_desired_thread): New declaration. All uses updated. * server.c (myresume): Updated comment to reference thread instead of inferior. (handle_serial_event): Likewise. (handle_target_event): Likewise.
2014-09-10 11:37:11 +02:00
reg_thread = get_lwp_thread (lwp);
saved_thread = current_thread;
current_thread = reg_thread;
regcache = get_thread_regcache (current_thread, 1);
* regcache.h (struct thread_info): Forward declare. (struct regcache): New. (new_register_cache): Adjust prototype. (get_thread_regcache): Declare. (free_register_cache): Adjust prototype. (registers_to_string, registers_from_string): Ditto. (supply_register, supply_register_by_name, collect_register) (collect_register_as_string, collect_register_by_name): Ditto. * regcache.c (struct inferior_regcache_data): Delete. (get_regcache): Rename to ... (get_thread_regcache): ... this. Adjust. Switch inferior before fetching registers. (regcache_invalidate_one): Adjust. (regcache_invalidate): Fix prototype. (new_register_cache): Return the new register cache. (free_register_cache): Change prototype. (realloc_register_cache): Adjust. (registers_to_string): Change prototype to take a regcache. Adjust. (registers_from_string): Ditto. (register_data): Ditto. (supply_register): Ditto. (supply_register_by_name): Ditto. (collect_register): Ditto. (collect_register_as_string): Ditto. (collect_register_by_name): Ditto. * server.c (process_serial_event): Adjust. * linux-low.h (regset_fill_func, regset_store_func): Change prototype. (get_pc, set_pc, collect_ptrace_register, supply_ptrace_register): Change prototype. * linux-low.c (get_stop_pc): Adjust. (check_removed_breakpoint): Adjust. (linux_wait_for_event): Adjust. (linux_resume_one_lwp): Adjust. (fetch_register): Add regcache parameter. Adjust. (usr_store_inferior_registers): Ditto. (regsets_fetch_inferior_registers): Ditto. (regsets_store_inferior_registers): Ditto. (linux_fetch_registers, linux_store_registers): Ditto. * i387-fp.c (i387_cache_to_fsave): Change prototype to take a regcache. Adjust. (i387_fsave_to_cache, i387_cache_to_fxsave, i387_fxsave_to_cache): Ditto. * i387-fp.h (i387_cache_to_fsave, i387_fsave_to_cache): Change prototype to take a regcache. (i387_cache_to_fxsave, i387_fxsave_to_cache): Ditto. * remote-utils.c (convert_ascii_to_int, outreg) (prepare_resume_reply): Change prototype to take a regcache. Adjust. * target.h (struct target_ops) <fetch_registers, store_registers>: Change prototype to take a regcache. (fetch_inferior_registers, store_inferior_registers): Change prototype to take a regcache. Adjust. * proc-service.c (ps_lgetregs): Adjust. * linux-x86-low.c (x86_fill_gregset, x86_store_gregset) (x86_fill_fpregset, x86_store_fpregset, x86_fill_fpxregset) (x86_store_fpxregset, x86_get_pc, x86_set_pc): Change prototype to take a regcache. Adjust. * linux-arm-low.c (arm_fill_gregset, arm_store_gregset) (arm_fill_wmmxregset, arm_store_wmmxregset, arm_fill_vfpregset) (arm_store_vfpregset, arm_get_pc, arm_set_pc): (arm_breakpoint_at): Change prototype to take a regcache. Adjust. * linux-cris-low.c (cris_get_pc, cris_set_pc) (cris_cannot_fetch_register): (cris_breakpoint_at): Change prototype to take a regcache. Adjust. * linux-crisv32-low.c (cris_get_pc, cris_set_pc, cris_reinsert_addr, cris_write_data_breakpoint): Change prototype to take a regcache. Adjust. (cris_breakpoint_at, cris_insert_point, cris_remove_point): Adjust. * linux-m32r-low.c (m32r_get_pc, m32r_set_pc): Change prototype to take a regcache. Adjust. * linux-m68k-low.c (m68k_fill_gregset, m68k_store_gregset) (m68k_fill_fpregset, m68k_store_fpregset, m68k_get_pc, (m68k_set_pc): Change prototype to take a regcache. Adjust. * linux-mips-low.c (mips_get_pc): (mips_set_pc): Change prototype to take a regcache. Adjust. (mips_reinsert_addr): Adjust. (mips_collect_register): Change prototype to take a regcache. Adjust. (mips_supply_register): (mips_collect_register_32bit, mips_supply_register_32bit) (mips_fill_gregset, mips_store_gregset, mips_fill_fpregset) (mips_store_fpregset): Ditto. * linux-ppc-low.c (ppc_supply_ptrace_register, ppc_supply_ptrace_register): Ditto. (parse_spufs_run): Adjust. (ppc_get_pc, ppc_set_pc, ppc_fill_gregset, ppc_fill_vsxregset) (ppc_store_vsxregset, ppc_fill_vrregset, ppc_store_vrregset) (ppc_fill_evrregset, ppc_store_evrregset): Change prototype to take a regcache. Adjust. * linux-s390-low.c (s390_collect_ptrace_register) (s390_supply_ptrace_register, s390_fill_gregset, s390_get_pc) (s390_set_pc): Change prototype to take a regcache. Adjust. (s390_arch_setup): Adjust. * linux-sh-low.c (sh_get_pc, sh_breakpoint_at) (sh_fill_gregset): Change prototype to take a regcache. Adjust. * linux-sparc-low.c (sparc_fill_gregset_to_stack) (sparc_fill_gregset, sparc_store_gregset_from_stack) (sparc_store_gregset, sparc_get_pc): Change prototype to take a regcache. Adjust. (sparc_breakpoint_at): Adjust. * linux-xtensa-low.c (xtensa_fill_gregset): (xtensa_store_gregset): (xtensa_fill_xtregset, xtensa_store_xtregset, xtensa_get_pc) (xtensa_set_pc): Change prototype to take a regcache. Adjust. * nto-low.c (nto_fetch_registers, nto_store_registers): Change prototype to take a regcache. Adjust. * win32-arm-low.c (arm_fetch_inferior_register) (arm_store_inferior_register): Change prototype to take a regcache. Adjust. * win32-i386-low.c (i386_fetch_inferior_register) (i386_store_inferior_register): Change prototype to take a regcache. Adjust. * win32-low.c (child_fetch_inferior_registers) (child_store_inferior_registers): Change prototype to take a regcache. Adjust. (win32_wait): Adjust. (win32_fetch_inferior_registers): Change prototype to take a regcache. Adjust. (win32_store_inferior_registers): Adjust. * win32-low.h (struct win32_target_ops) <fetch_inferior_register, store_inferior_register>: Change prototype to take a regcache.
2010-01-20 23:55:38 +01:00
gregset_info ()->fill_function (regcache, gregset);
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
Rename current_inferior as current_thread in gdbserver GDB has a function named "current_inferior" and gdbserver has a global variable named "current_inferior", but the two are not equivalent; indeed, gdbserver does not have any real equivalent of what GDB calls an inferior. What gdbserver's "current_inferior" is actually pointing to is a structure describing the current thread. This commit renames current_inferior as current_thread in gdbserver to clarify this. It also renames the function "set_desired_inferior" to "set_desired_thread" and renames various local variables from foo_inferior to foo_thread. gdb/gdbserver/ChangeLog: * inferiors.h (current_inferior): Renamed as... (current_thread): New variable. All uses updated. * linux-low.c (get_pc): Renamed saved_inferior as saved_thread. (maybe_move_out_of_jump_pad): Likewise. (cancel_breakpoint): Likewise. (linux_low_filter_event): Likewise. (wait_for_sigstop): Likewise. (linux_resume_one_lwp): Likewise. (need_step_over_p): Likewise. (start_step_over): Likewise. (linux_stabilize_threads): Renamed save_inferior as saved_thread. * linux-x86-low.c (x86_linux_update_xmltarget): Likewise. * proc-service.c (ps_lgetregs): Renamed reg_inferior as reg_thread and save_inferior as saved_thread. * regcache.c (get_thread_regcache): Renamed saved_inferior as saved_thread. (regcache_invalidate_thread): Likewise. * remote-utils.c (prepare_resume_reply): Likewise. * thread-db.c (thread_db_get_tls_address): Likewise. (disable_thread_event_reporting): Likewise. (remove_thread_event_breakpoints): Likewise. * tracepoint.c (gdb_agent_about_to_close): Renamed save_inferior as saved_thread. * target.h (set_desired_inferior): Renamed as... (set_desired_thread): New declaration. All uses updated. * server.c (myresume): Updated comment to reference thread instead of inferior. (handle_serial_event): Likewise. (handle_target_event): Likewise.
2014-09-10 11:37:11 +02:00
current_thread = saved_thread;
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
return PS_OK;
#else
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
return PS_ERR;
#endif
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
}
/* Set the general registers of LWP LWPID within the target process PH
from GREGSET. */
ps_err_e
ps_lsetregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, const prgregset_t gregset)
{
/* Unneeded. */
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
return PS_ERR;
}
/* Get the floating-point registers of LWP LWPID within the target
process PH and store them in FPREGSET. */
ps_err_e
ps_lgetfpregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, prfpregset_t *fpregset)
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
{
/* Unneeded. */
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
return PS_ERR;
}
/* Set the floating-point registers of LWP LWPID within the target
process PH from FPREGSET. */
ps_err_e
ps_lsetfpregs (gdb_ps_prochandle_t ph, lwpid_t lwpid, const prfpregset_t *fpregset)
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
{
/* Unneeded. */
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
return PS_ERR;
}
/* Return overall process id of the target PH. Special for GNU/Linux
-- not used on Solaris. */
pid_t
ps_getpid (gdb_ps_prochandle_t ph)
{
Rename current_inferior as current_thread in gdbserver GDB has a function named "current_inferior" and gdbserver has a global variable named "current_inferior", but the two are not equivalent; indeed, gdbserver does not have any real equivalent of what GDB calls an inferior. What gdbserver's "current_inferior" is actually pointing to is a structure describing the current thread. This commit renames current_inferior as current_thread in gdbserver to clarify this. It also renames the function "set_desired_inferior" to "set_desired_thread" and renames various local variables from foo_inferior to foo_thread. gdb/gdbserver/ChangeLog: * inferiors.h (current_inferior): Renamed as... (current_thread): New variable. All uses updated. * linux-low.c (get_pc): Renamed saved_inferior as saved_thread. (maybe_move_out_of_jump_pad): Likewise. (cancel_breakpoint): Likewise. (linux_low_filter_event): Likewise. (wait_for_sigstop): Likewise. (linux_resume_one_lwp): Likewise. (need_step_over_p): Likewise. (start_step_over): Likewise. (linux_stabilize_threads): Renamed save_inferior as saved_thread. * linux-x86-low.c (x86_linux_update_xmltarget): Likewise. * proc-service.c (ps_lgetregs): Renamed reg_inferior as reg_thread and save_inferior as saved_thread. * regcache.c (get_thread_regcache): Renamed saved_inferior as saved_thread. (regcache_invalidate_thread): Likewise. * remote-utils.c (prepare_resume_reply): Likewise. * thread-db.c (thread_db_get_tls_address): Likewise. (disable_thread_event_reporting): Likewise. (remove_thread_event_breakpoints): Likewise. * tracepoint.c (gdb_agent_about_to_close): Renamed save_inferior as saved_thread. * target.h (set_desired_inferior): Renamed as... (set_desired_thread): New declaration. All uses updated. * server.c (myresume): Updated comment to reference thread instead of inferior. (handle_serial_event): Likewise. (handle_target_event): Likewise.
2014-09-10 11:37:11 +02:00
return pid_of (current_thread);
2002-06-11 Daniel Jacobowitz <drow@mvista.com> * gdbserver/thread-db.c: New file. * gdbserver/proc-service.c: New file. * gdbserver/acinclude.m4: New file. * gdbserver/Makefile.in: Add GDBSERVER_LIBS, gdb_proc_service_h, proc-service.o, and thread-db.o. (linux-low.o): Add USE_THREAD_DB. * gdbserver/acconfig.h: Add HAVE_PRGREGSET_T, HAVE_PRFPREGSET_T, HAVE_LWPID_T, HAVE_PSADDR_T, and PRFPREGSET_T_BROKEN. * gdbserver/aclocal.m4: Regenerated. * gdbserver/config.in: Regenerated. * gdbserver/configure: Regenerated. * gdbserver/configure.in: Check for proc_service.h, sys/procfs.h, thread_db.h, and linux/elf.h headrs. Check for lwpid_t, psaddr_t, prgregset_t, prfpregset_t, and PRFPREGSET_T_BROKEN. Introduce srv_thread_depfiles and USE_THREAD_DB. Check for -lthread_db and thread support. * gdbserver/configure.srv: Enable thread_db support for ARM, i386, MIPS, PowerPC, and SuperH. * gdbserver/i387-fp.c: Constify arguments. * gdbserver/i387-fp.h: Likewise. * gdbserver/inferiors.c: (struct thread_info): Renamed from `struct inferior_info'. Remove PID member. Use generic inferior list header. All uses updated. (inferiors, signal_pid): Removed. (all_threads): New variable. (get_thread): Define. (add_inferior_to_list): New function. (for_each_inferior): New function. (change_inferior_id): New function. (add_inferior): Removed. (remove_inferior): New function. (add_thread): New function. (free_one_thread): New function. (remove_thread): New function. (clear_inferiors): Use for_each_inferior and free_one_thread. (find_inferior): New function. (find_inferior_id): New function. (inferior_target_data): Update argument type. (set_inferior_target_data): Likewise. (inferior_regcache_data): Likewise. (set_inferior_regcache_data): Likewise. * gdbserver/linux-low.c (linux_bp_reinsert): Remove. (all_processes, stopping_threads, using_thrads) (struct pending_signals, debug_threads, pid_of): New. (inferior_pid): Replace with macro. (struct inferior_linux_data): Remove. (get_stop_pc, add_process): New functions. (linux_create_inferior): Restore SIGRTMIN+1 before calling exec. Use add_process and add_thread. (linux_attach_lwp): New function, based on old linux_attach. Use add_process and add_thread. Set stop_expected for new threads. (linux_attach): New function. (linux_kill_one_process): New function. (linux_kill): Kill all LWPs. (linux_thread_alive): Use find_inferior_id. (check_removed_breakpoints, status_pending_p): New functions. (linux_wait_for_process): Renamed from linux_wait_for_one_inferior. Update. Use WNOHANG. Wait for cloned processes also. Update process struct for the found process. (linux_wait_for_event): New function. (linux_wait): Use it. Support LWPs. (send_sigstop, wait_for_sigstop, stop_all_processes) (linux_resume_one_process, linux_continue_one_process): New functions. (linux_resume): Support LWPs. (REGISTER_RAW_SIZE): Remove. (fetch_register): Use register_size instead. Call supply_register. (usr_store_inferior_registers): Likewise. Call collect_register. Fix recursive case. (regsets_fetch_inferior_registers): Improve error message. (regsets_store_inferior_registers): Add debugging. (linux_look_up_symbols): Call thread_db_init if USE_THREAD_DB. (unstopped_p, linux_signal_pid): New functions. (linux_target_ops): Add linux_signal_pid. (linux_init_signals): New function. (initialize_low): Call it. Initialize using_threads. * gdbserver/regcache.c (inferior_regcache_data): Add valid flag. (get_regcache): Fetch registers lazily. Add fetch argument and update all callers. (regcache_invalidate_one, regcache_invalidate): New functions. (new_register_cache): Renamed from create_register_cache. Return the new regcache. (free_register_cache): Change argument to a void *. (registers_to_string, registers_from_string): Call get_regcache with fetch flag set. (register_data): Make static. Pass fetch flag to get_regcache. (supply_register): Call get_regcache with fetch flag clear. (collect_register): Call get_regcache with fetch flag set. (collect_register_as_string): New function. * gdbserver/regcache.h: Update. * gdbserver/remote-utils.c (putpkt): Flush after debug output and use stderr. Handle input interrupts while waiting for an ACK. (input_interrupt): Use signal_pid method. (getpkt): Flush after debug output and use stderr. (outreg): Use collect_register_as_string. (new_thread_notify, dead_thread_notify): New functions. (prepare_resume_reply): Check using_threads. Set thread_from_wait and general_thread. (look_up_one_symbol): Flush after debug output. * gdbserver/server.c (step_thread, server_waiting): New variables. (start_inferior): Don't use signal_pid. Update call to mywait. (attach_inferior): Update call to mywait. (handle_query): Handle qfThreadInfo and qsThreadInfo. (main): Don't fetch/store registers explicitly. Use set_desired_inferior. Support proposed ``Hs'' packet. Update calls to mywait. * gdbserver/server.h: Update. (struct inferior_list, struct_inferior_list_entry): New. * gdbserver/target.c (set_desired_inferior): New. (write_inferior_memory): Constify. (mywait): New function. * gdbserver/target.h: Update. (struct target_ops): New signal_pid method. (mywait): Removed macro, added prototype. * gdbserver/linux-low.h (regset_func): Removed. (regset_fill_func, regset_store_func): New. (enum regset_type): New. (struct regset_info): Add type field. Use new operation types. (struct linux_target_ops): stop_pc renamed to get_pc. Add decr_pc_after_break and breakpoint_at. (get_process, get_thread_proess, get_process_thread) (strut process_info, all_processes, linux_attach_lwp) (thread_db_init): New. * gdbserver/linux-arm-low.c (arm_get_pc, arm_set_pc, arm_breakpoint, arm_breakpoint_len, arm_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-i386-low.c (i386_store_gregset, i386_store_fpregset) (i386_store_fpxregset): Constify. (target_regsets): Add new kind identifier. (i386_get_pc): Renamed from i386_stop_pc. Simplify. (i386_set_pc): Add debugging. (i386_breakpoint_at): New function. (the_low_target): Add new members. * gdbserver/linux-mips-low.c (mips_get_pc, mips_set_pc) (mips_breakpoint, mips_breakpoint_len, mips_reinsert_addr) (mips_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-ppc-low.c (ppc_get_pc, ppc_set_pc) (ppc_breakpoint, ppc_breakpoint_len, ppc_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-sh-low.c (sh_get_pc, sh_set_pc) (sh_breakpoint, sh_breakpoint_len, sh_breakpoint_at): New. (the_low_target): Add new members. * gdbserver/linux-x86-64-low.c (target_regsets): Add new kind identifier.
2002-06-11 19:32:40 +02:00
}