OpenE2K/binutils-gdb
12
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
binutils-gdb/ld/testsuite/ld-powerpc/notoc.d

103 lines
3.7 KiB
D
Raw Normal View History

R_PPC64_REL24_NOTOC support R_PPC64_REL24_NOTOC is used on calls like "bl foo@notoc" to tell the linker that linkage stubs for PLT calls or long branches can't use r2 for pic addressing. Instead, new stubs that generate pc-relative addresses are used. One complication is that pc-relative offsets to the PLT may need to be 64-bit in large programs, in contrast to the toc-relative addressing used by older PLT linkage stubs where a 32-bit offset is sufficient until the PLT itself exceeds 2G in size. .eh_frame info to cover the _notoc stubs is yet to be implemented. bfd/ * elf64-ppc.c (ADDI_R12_R11, ADDI_R12_R12, LIS_R12), (ADDIS_R12_R11, ORIS_R12_R12_0, ORI_R12_R12_0), (SLDI_R12_R12_32, LDX_R12_R11_R12, ADD_R12_R11_R12): Define. (ppc64_elf_howto_raw): Add R_PPC64_REL24_NOTOC entry. (ppc64_elf_reloc_type_lookup): Support R_PPC64_REL24_NOTOC. (ppc_stub_type): Add ppc_stub_long_branch_notoc, ppc_stub_long_branch_both, ppc_stub_plt_branch_notoc, ppc_stub_plt_branch_both, ppc_stub_plt_call_notoc, and ppc_stub_plt_call_both. (is_branch_reloc): Add R_PPC64_REL24_NOTOC. (build_offset, size_offset): New functions. (plt_stub_size): Support plt_call_notoc and plt_call_both. (ppc_build_one_stub, ppc_size_one_stub): Support new stubs. (toc_adjusting_stub_needed): Handle R_PPC64_REL24_NOTOC. (ppc64_elf_size_stubs): Likewise, and new stubs. (ppc64_elf_build_stubs, ppc64_elf_relocate_section): Likewise. * reloc.c: Add BFD_RELOC_PPC64_REL24_NOTOC. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Support @notoc. (ppc_force_relocation, ppc_fix_adjustable): Handle REL24_NOTOC. ld/ * testsuite/ld-powerpc/ext.d, * testsuite/ld-powerpc/ext.s, * testsuite/ld-powerpc/ext.lnk, * testsuite/ld-powerpc/notoc.d, * testsuite/ld-powerpc/notoc.s: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them.
2018-08-03 16:41:22 +09:30
#source: notoc.s
#as: -a64
Power10 stub selection This patch better supports mixing of power10 and non-power10 code, as might be seen in a cpu-optimized library using ifuncs to select functions optimized for a given cpu. Using -Wl,--no-power10-stubs isn't that good in this situation since non-power10 notoc stubs are slower and larger than the power10 variants, which you'd like to use on power10 code paths. With this change, power10 pc-relative code that makes calls marked @notoc uses power10 stubs if stubs are necessary, and other calls use non-power10 instructions in stubs. This will mean that if gcc is generating code for -mcpu=power10 but with pc-rel disabled then you'll get the older stubs even on power10 (unless you force with -Wl,--power10-stubs). That shouldn't be too big a problem: stubs that use r2 are reasonable. It's just the ones that set up addressing using "mflr 12; bcl 20,31,.+4; mflr 11; mtlr 12" that should be avoided if possible. bfd/ * elf64-ppc.c (struct ppc_link_hash_table): Add has_power10_relocs. (select_alt_stub): New function. (ppc_get_stub_entry): Use it here. (ppc64_elf_check_relocs): Set had_power10_relocs rather than power10_stubs. (ppc64_elf_size_stubs): Clear power10_stubs here instead. Don't merge notoc stubs with other varieties when power10_stubs is "auto". Instead dup the stub hash table entry. (plt_stub_size, ppc_build_one_stub, ppc_size_one_stub): Adjust tests of power10_stubs. ld/ * emultempl/ppc64elf.em (power10-stubs): Accept optional "auto" arg. * ld.texi (power10-stubs): Update. * testsuite/ld-powerpc/callstub-1.d: Force --power10-stubs. * testsuite/ld-powerpc/callstub-2.d: Relax branch offset comparison. * testsuite/ld-powerpc/callstub-4.d: New test. * testsuite/ld-powerpc/notoc.d: Force --no-power10-stubs. * testsuite/ld-powerpc/notoc3.d, * testsuite/ld-powerpc/notoc3.s, * testsuite/ld-powerpc/notoc3.wf: New test. * testsuite/ld-powerpc/powerpc.exp: Run new tests. Pass --no-power10-stubs for notoc link. (cherry picked from commit e10a07b32dc1faed25b5bbcbbc47d68e2ff537b9)
2020-07-17 16:47:28 +09:30
#ld: --no-plt-localentry --no-power10-stubs -T ext.lnk
PowerPC64 EH info for _notoc linkage stubs This patch generates EH info for the new _notoc linkage stubs, to support unwinding from asynchronous signal handlers. Unwinding through the __tls_get_addr_opt stub was already supported, but that was just a single stub. With multiple stubs the EH opcodes need to be emitted and sized when iterating over stubs, so this is done when emitting and sizing the stub code. Emitting the CIEs and FDEs is done when sizing the stubs, as we did before in order to have the linker generated FDEs indexed in .eh_frame_hdr. I moved the final tweaks to FDEs from ppc64_elf_finish_dynamic_sections to ppc64_elf_build_stubs simply because it's tidier to be done with them at that point. bfd/ * elf64-ppc.c (struct map_stub): Delete tls_get_addr_opt_bctrl. Add lr_restore, eh_size and eh_base. (eh_advance, eh_advance_size): New functions. (build_tls_get_addr_stub): Emit EH info for stub. (ppc_build_one_stub): Likewise for _notoc stubs. (ppc_size_one_stub): Size EH info for stub. (group_sections): Init new map_stub fields. (stub_eh_frame_size): Delete. (ppc64_elf_size_stubs): Size EH info for stubs. Set up dummy EH program for stubs. (ppc64_elf_build_stubs): Reinit new map_stub fields. Set FDE offset to stub section here.. (ppc64_elf_finish_dynamic_sections): ..rather than here. ld/ * testsuite/ld-powerpc/notoc.s: Generate some cfi. * testsuite/ld-powerpc/notoc.d: Adjust. * testsuite/ld-powerpc/notoc.wf: New file. * testsuite/ld-powerpc/powerpc.exp: Run "ext" and "notoc" tests as run_ld_link_tests rather than run_dump_test.
2018-08-06 21:43:51 +09:30
#objdump: -d
R_PPC64_REL24_NOTOC support R_PPC64_REL24_NOTOC is used on calls like "bl foo@notoc" to tell the linker that linkage stubs for PLT calls or long branches can't use r2 for pic addressing. Instead, new stubs that generate pc-relative addresses are used. One complication is that pc-relative offsets to the PLT may need to be 64-bit in large programs, in contrast to the toc-relative addressing used by older PLT linkage stubs where a 32-bit offset is sufficient until the PLT itself exceeds 2G in size. .eh_frame info to cover the _notoc stubs is yet to be implemented. bfd/ * elf64-ppc.c (ADDI_R12_R11, ADDI_R12_R12, LIS_R12), (ADDIS_R12_R11, ORIS_R12_R12_0, ORI_R12_R12_0), (SLDI_R12_R12_32, LDX_R12_R11_R12, ADD_R12_R11_R12): Define. (ppc64_elf_howto_raw): Add R_PPC64_REL24_NOTOC entry. (ppc64_elf_reloc_type_lookup): Support R_PPC64_REL24_NOTOC. (ppc_stub_type): Add ppc_stub_long_branch_notoc, ppc_stub_long_branch_both, ppc_stub_plt_branch_notoc, ppc_stub_plt_branch_both, ppc_stub_plt_call_notoc, and ppc_stub_plt_call_both. (is_branch_reloc): Add R_PPC64_REL24_NOTOC. (build_offset, size_offset): New functions. (plt_stub_size): Support plt_call_notoc and plt_call_both. (ppc_build_one_stub, ppc_size_one_stub): Support new stubs. (toc_adjusting_stub_needed): Handle R_PPC64_REL24_NOTOC. (ppc64_elf_size_stubs): Likewise, and new stubs. (ppc64_elf_build_stubs, ppc64_elf_relocate_section): Likewise. * reloc.c: Add BFD_RELOC_PPC64_REL24_NOTOC. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Support @notoc. (ppc_force_relocation, ppc_fix_adjustable): Handle REL24_NOTOC. ld/ * testsuite/ld-powerpc/ext.d, * testsuite/ld-powerpc/ext.s, * testsuite/ld-powerpc/ext.lnk, * testsuite/ld-powerpc/notoc.d, * testsuite/ld-powerpc/notoc.s: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them.
2018-08-03 16:41:22 +09:30
#target: powerpc64*-*-*
.*
Disassembly of section \.text:
.* <.*\.long_branch\.f1>:
.*: (18 00 41 f8|f8 41 00 18) std r2,24\(r1\)
.*: (7c 00 00 48|48 00 00 7c) b .* <f1>
.* <.*\.long_branch\.g1>:
.*: (18 00 41 f8|f8 41 00 18) std r2,24\(r1\)
.*: (8c 00 00 48|48 00 00 8c) b .* <g1>
.* <.*\.plt_branch\.ext>:
.*: (a6 02 88 7d|7d 88 02 a6) mflr r12
.*: (05 00 9f 42|42 9f 00 05) bcl .*
.*: (a6 02 68 7d|7d 68 02 a6) mflr r11
.*: (a6 03 88 7d|7d 88 03 a6) mtlr r12
.*: (ff 7f 80 3d|3d 80 7f ff) lis r12,32767
.*: (ff ff 8c 61|61 8c ff ff) ori r12,r12,65535
.*: (c6 07 9c 79|79 9c 07 c6) rldicr r28,r12,32,31
.*: (ff ef 8c 65|65 8c ef ff) oris r12,r12,61439
.*: (28 ff 8c 61|61 8c ff 28) ori r12,r12,65320
.*: (14 62 8b 7d|7d 8b 62 14) add r12,r11,r12
.*: (a6 03 89 7d|7d 89 03 a6) mtctr r12
.*: (20 04 80 4e|4e 80 04 20) bctr
.* <.*\.long_branch\.f2>:
.*: (a6 02 88 7d|7d 88 02 a6) mflr r12
.*: (05 00 9f 42|42 9f 00 05) bcl .*
.*: (a6 02 68 7d|7d 68 02 a6) mflr r11
.*: (a6 03 88 7d|7d 88 03 a6) mtlr r12
.*: (64 00 8b 39|39 8b 00 64) addi r12,r11,100
.*: (58 00 00 48|48 00 00 58) b .* <f2>
.* <.*\.long_branch\.g2>:
.*: (a6 02 88 7d|7d 88 02 a6) mflr r12
.*: (05 00 9f 42|42 9f 00 05) bcl .*
.*: (a6 02 68 7d|7d 68 02 a6) mflr r11
.*: (a6 03 88 7d|7d 88 03 a6) mtlr r12
.*: (80 00 8b 39|39 8b 00 80) addi r12,r11,128
.*: (74 00 00 48|48 00 00 74) b .* <g2>
\.\.\.
.* <f1>:
.*: (01 00 00 48|48 00 00 01) bl .* <f1>
.*: (bd ff ff 4b|4b ff ff bd) bl .* <.*\.long_branch\.f2>
.*: (11 00 00 48|48 00 00 11) bl .* <g1>
.*: (cd ff ff 4b|4b ff ff cd) bl .* <.*\.long_branch\.g2>
.*: (81 ff ff 4b|4b ff ff 81) bl .* <.*\.plt_branch\.ext>
.*: (20 00 80 4e|4e 80 00 20) blr
.* <g1>:
.*: (a9 ff ff 4b|4b ff ff a9) bl .* <.*\.long_branch\.f2>
.*: (e5 ff ff 4b|4b ff ff e5) bl .* <f1>
.*: (b9 ff ff 4b|4b ff ff b9) bl .* <.*\.long_branch\.g2>
.*: (f5 ff ff 4b|4b ff ff f5) bl .* <g1>
.*: (20 00 80 4e|4e 80 00 20) blr
.* <f2>:
PowerPC64 EH info for _notoc linkage stubs This patch generates EH info for the new _notoc linkage stubs, to support unwinding from asynchronous signal handlers. Unwinding through the __tls_get_addr_opt stub was already supported, but that was just a single stub. With multiple stubs the EH opcodes need to be emitted and sized when iterating over stubs, so this is done when emitting and sizing the stub code. Emitting the CIEs and FDEs is done when sizing the stubs, as we did before in order to have the linker generated FDEs indexed in .eh_frame_hdr. I moved the final tweaks to FDEs from ppc64_elf_finish_dynamic_sections to ppc64_elf_build_stubs simply because it's tidier to be done with them at that point. bfd/ * elf64-ppc.c (struct map_stub): Delete tls_get_addr_opt_bctrl. Add lr_restore, eh_size and eh_base. (eh_advance, eh_advance_size): New functions. (build_tls_get_addr_stub): Emit EH info for stub. (ppc_build_one_stub): Likewise for _notoc stubs. (ppc_size_one_stub): Size EH info for stub. (group_sections): Init new map_stub fields. (stub_eh_frame_size): Delete. (ppc64_elf_size_stubs): Size EH info for stubs. Set up dummy EH program for stubs. (ppc64_elf_build_stubs): Reinit new map_stub fields. Set FDE offset to stub section here.. (ppc64_elf_finish_dynamic_sections): ..rather than here. ld/ * testsuite/ld-powerpc/notoc.s: Generate some cfi. * testsuite/ld-powerpc/notoc.d: Adjust. * testsuite/ld-powerpc/notoc.wf: New file. * testsuite/ld-powerpc/powerpc.exp: Run "ext" and "notoc" tests as run_ld_link_tests rather than run_dump_test.
2018-08-06 21:43:51 +09:30
.*: (01 10 40 3c|3c 40 10 01) lis r2,4097
.*: (00 80 42 38|38 42 80 00) addi r2,r2,-32768
R_PPC64_REL24_NOTOC support R_PPC64_REL24_NOTOC is used on calls like "bl foo@notoc" to tell the linker that linkage stubs for PLT calls or long branches can't use r2 for pic addressing. Instead, new stubs that generate pc-relative addresses are used. One complication is that pc-relative offsets to the PLT may need to be 64-bit in large programs, in contrast to the toc-relative addressing used by older PLT linkage stubs where a 32-bit offset is sufficient until the PLT itself exceeds 2G in size. .eh_frame info to cover the _notoc stubs is yet to be implemented. bfd/ * elf64-ppc.c (ADDI_R12_R11, ADDI_R12_R12, LIS_R12), (ADDIS_R12_R11, ORIS_R12_R12_0, ORI_R12_R12_0), (SLDI_R12_R12_32, LDX_R12_R11_R12, ADD_R12_R11_R12): Define. (ppc64_elf_howto_raw): Add R_PPC64_REL24_NOTOC entry. (ppc64_elf_reloc_type_lookup): Support R_PPC64_REL24_NOTOC. (ppc_stub_type): Add ppc_stub_long_branch_notoc, ppc_stub_long_branch_both, ppc_stub_plt_branch_notoc, ppc_stub_plt_branch_both, ppc_stub_plt_call_notoc, and ppc_stub_plt_call_both. (is_branch_reloc): Add R_PPC64_REL24_NOTOC. (build_offset, size_offset): New functions. (plt_stub_size): Support plt_call_notoc and plt_call_both. (ppc_build_one_stub, ppc_size_one_stub): Support new stubs. (toc_adjusting_stub_needed): Handle R_PPC64_REL24_NOTOC. (ppc64_elf_size_stubs): Likewise, and new stubs. (ppc64_elf_build_stubs, ppc64_elf_relocate_section): Likewise. * reloc.c: Add BFD_RELOC_PPC64_REL24_NOTOC. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Support @notoc. (ppc_force_relocation, ppc_fix_adjustable): Handle REL24_NOTOC. ld/ * testsuite/ld-powerpc/ext.d, * testsuite/ld-powerpc/ext.s, * testsuite/ld-powerpc/ext.lnk, * testsuite/ld-powerpc/notoc.d, * testsuite/ld-powerpc/notoc.s: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them.
2018-08-03 16:41:22 +09:30
.*: (4d ff ff 4b|4b ff ff 4d) bl .* <.*\.long_branch\.f1>
.*: (18 00 41 e8|e8 41 00 18) ld r2,24\(r1\)
.*: (f9 ff ff 4b|4b ff ff f9) bl .* <f2\+0x8>
.*: (00 00 00 60|60 00 00 00) nop
.*: (45 ff ff 4b|4b ff ff 45) bl .* <.*\.long_branch\.g1>
.*: (18 00 41 e8|e8 41 00 18) ld r2,24\(r1\)
.*: (1d 00 00 48|48 00 00 1d) bl .* <g2\+0x8>
.*: (00 00 00 60|60 00 00 00) nop
.*: (3d ff ff 4b|4b ff ff 3d) bl .* <.*\.plt_branch\.ext>
.*: (00 00 00 60|60 00 00 00) nop
.*: (20 00 80 4e|4e 80 00 20) blr
.* <g2>:
PowerPC64 EH info for _notoc linkage stubs This patch generates EH info for the new _notoc linkage stubs, to support unwinding from asynchronous signal handlers. Unwinding through the __tls_get_addr_opt stub was already supported, but that was just a single stub. With multiple stubs the EH opcodes need to be emitted and sized when iterating over stubs, so this is done when emitting and sizing the stub code. Emitting the CIEs and FDEs is done when sizing the stubs, as we did before in order to have the linker generated FDEs indexed in .eh_frame_hdr. I moved the final tweaks to FDEs from ppc64_elf_finish_dynamic_sections to ppc64_elf_build_stubs simply because it's tidier to be done with them at that point. bfd/ * elf64-ppc.c (struct map_stub): Delete tls_get_addr_opt_bctrl. Add lr_restore, eh_size and eh_base. (eh_advance, eh_advance_size): New functions. (build_tls_get_addr_stub): Emit EH info for stub. (ppc_build_one_stub): Likewise for _notoc stubs. (ppc_size_one_stub): Size EH info for stub. (group_sections): Init new map_stub fields. (stub_eh_frame_size): Delete. (ppc64_elf_size_stubs): Size EH info for stubs. Set up dummy EH program for stubs. (ppc64_elf_build_stubs): Reinit new map_stub fields. Set FDE offset to stub section here.. (ppc64_elf_finish_dynamic_sections): ..rather than here. ld/ * testsuite/ld-powerpc/notoc.s: Generate some cfi. * testsuite/ld-powerpc/notoc.d: Adjust. * testsuite/ld-powerpc/notoc.wf: New file. * testsuite/ld-powerpc/powerpc.exp: Run "ext" and "notoc" tests as run_ld_link_tests rather than run_dump_test.
2018-08-06 21:43:51 +09:30
.*: (01 10 40 3c|3c 40 10 01) lis r2,4097
.*: (00 80 42 38|38 42 80 00) addi r2,r2,-32768
R_PPC64_REL24_NOTOC support R_PPC64_REL24_NOTOC is used on calls like "bl foo@notoc" to tell the linker that linkage stubs for PLT calls or long branches can't use r2 for pic addressing. Instead, new stubs that generate pc-relative addresses are used. One complication is that pc-relative offsets to the PLT may need to be 64-bit in large programs, in contrast to the toc-relative addressing used by older PLT linkage stubs where a 32-bit offset is sufficient until the PLT itself exceeds 2G in size. .eh_frame info to cover the _notoc stubs is yet to be implemented. bfd/ * elf64-ppc.c (ADDI_R12_R11, ADDI_R12_R12, LIS_R12), (ADDIS_R12_R11, ORIS_R12_R12_0, ORI_R12_R12_0), (SLDI_R12_R12_32, LDX_R12_R11_R12, ADD_R12_R11_R12): Define. (ppc64_elf_howto_raw): Add R_PPC64_REL24_NOTOC entry. (ppc64_elf_reloc_type_lookup): Support R_PPC64_REL24_NOTOC. (ppc_stub_type): Add ppc_stub_long_branch_notoc, ppc_stub_long_branch_both, ppc_stub_plt_branch_notoc, ppc_stub_plt_branch_both, ppc_stub_plt_call_notoc, and ppc_stub_plt_call_both. (is_branch_reloc): Add R_PPC64_REL24_NOTOC. (build_offset, size_offset): New functions. (plt_stub_size): Support plt_call_notoc and plt_call_both. (ppc_build_one_stub, ppc_size_one_stub): Support new stubs. (toc_adjusting_stub_needed): Handle R_PPC64_REL24_NOTOC. (ppc64_elf_size_stubs): Likewise, and new stubs. (ppc64_elf_build_stubs, ppc64_elf_relocate_section): Likewise. * reloc.c: Add BFD_RELOC_PPC64_REL24_NOTOC. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Support @notoc. (ppc_force_relocation, ppc_fix_adjustable): Handle REL24_NOTOC. ld/ * testsuite/ld-powerpc/ext.d, * testsuite/ld-powerpc/ext.s, * testsuite/ld-powerpc/ext.lnk, * testsuite/ld-powerpc/notoc.d, * testsuite/ld-powerpc/notoc.s: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them.
2018-08-03 16:41:22 +09:30
.*: (cd ff ff 4b|4b ff ff cd) bl .* <f2\+0x8>
.*: (00 00 00 60|60 00 00 00) nop
.*: (11 ff ff 4b|4b ff ff 11) bl .* <.*\.long_branch\.f1>
.*: (18 00 41 e8|e8 41 00 18) ld r2,24\(r1\)
.*: (f1 ff ff 4b|4b ff ff f1) bl .* <g2\+0x8>
.*: (00 00 00 60|60 00 00 00) nop
.*: (09 ff ff 4b|4b ff ff 09) bl .* <.*\.long_branch\.g1>
.*: (18 00 41 e8|e8 41 00 18) ld r2,24\(r1\)
.*: (20 00 80 4e|4e 80 00 20) blr
.* <_start>:
.*: (00 00 00 48|48 00 00 00) b .* <_start>
Disassembly of section \.text\.ext:
8000000000000000 <ext>:
PowerPC64 EH info for _notoc linkage stubs This patch generates EH info for the new _notoc linkage stubs, to support unwinding from asynchronous signal handlers. Unwinding through the __tls_get_addr_opt stub was already supported, but that was just a single stub. With multiple stubs the EH opcodes need to be emitted and sized when iterating over stubs, so this is done when emitting and sizing the stub code. Emitting the CIEs and FDEs is done when sizing the stubs, as we did before in order to have the linker generated FDEs indexed in .eh_frame_hdr. I moved the final tweaks to FDEs from ppc64_elf_finish_dynamic_sections to ppc64_elf_build_stubs simply because it's tidier to be done with them at that point. bfd/ * elf64-ppc.c (struct map_stub): Delete tls_get_addr_opt_bctrl. Add lr_restore, eh_size and eh_base. (eh_advance, eh_advance_size): New functions. (build_tls_get_addr_stub): Emit EH info for stub. (ppc_build_one_stub): Likewise for _notoc stubs. (ppc_size_one_stub): Size EH info for stub. (group_sections): Init new map_stub fields. (stub_eh_frame_size): Delete. (ppc64_elf_size_stubs): Size EH info for stubs. Set up dummy EH program for stubs. (ppc64_elf_build_stubs): Reinit new map_stub fields. Set FDE offset to stub section here.. (ppc64_elf_finish_dynamic_sections): ..rather than here. ld/ * testsuite/ld-powerpc/notoc.s: Generate some cfi. * testsuite/ld-powerpc/notoc.d: Adjust. * testsuite/ld-powerpc/notoc.wf: New file. * testsuite/ld-powerpc/powerpc.exp: Run "ext" and "notoc" tests as run_ld_link_tests rather than run_dump_test.
2018-08-06 21:43:51 +09:30
8000000000000000: (01 10 40 3c|3c 40 10 01) lis r2,4097
8000000000000004: (00 80 42 38|38 42 80 00) addi r2,r2,-32768
R_PPC64_REL24_NOTOC support R_PPC64_REL24_NOTOC is used on calls like "bl foo@notoc" to tell the linker that linkage stubs for PLT calls or long branches can't use r2 for pic addressing. Instead, new stubs that generate pc-relative addresses are used. One complication is that pc-relative offsets to the PLT may need to be 64-bit in large programs, in contrast to the toc-relative addressing used by older PLT linkage stubs where a 32-bit offset is sufficient until the PLT itself exceeds 2G in size. .eh_frame info to cover the _notoc stubs is yet to be implemented. bfd/ * elf64-ppc.c (ADDI_R12_R11, ADDI_R12_R12, LIS_R12), (ADDIS_R12_R11, ORIS_R12_R12_0, ORI_R12_R12_0), (SLDI_R12_R12_32, LDX_R12_R11_R12, ADD_R12_R11_R12): Define. (ppc64_elf_howto_raw): Add R_PPC64_REL24_NOTOC entry. (ppc64_elf_reloc_type_lookup): Support R_PPC64_REL24_NOTOC. (ppc_stub_type): Add ppc_stub_long_branch_notoc, ppc_stub_long_branch_both, ppc_stub_plt_branch_notoc, ppc_stub_plt_branch_both, ppc_stub_plt_call_notoc, and ppc_stub_plt_call_both. (is_branch_reloc): Add R_PPC64_REL24_NOTOC. (build_offset, size_offset): New functions. (plt_stub_size): Support plt_call_notoc and plt_call_both. (ppc_build_one_stub, ppc_size_one_stub): Support new stubs. (toc_adjusting_stub_needed): Handle R_PPC64_REL24_NOTOC. (ppc64_elf_size_stubs): Likewise, and new stubs. (ppc64_elf_build_stubs, ppc64_elf_relocate_section): Likewise. * reloc.c: Add BFD_RELOC_PPC64_REL24_NOTOC. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. gas/ * config/tc-ppc.c (ppc_elf_suffix): Support @notoc. (ppc_force_relocation, ppc_fix_adjustable): Handle REL24_NOTOC. ld/ * testsuite/ld-powerpc/ext.d, * testsuite/ld-powerpc/ext.s, * testsuite/ld-powerpc/ext.lnk, * testsuite/ld-powerpc/notoc.d, * testsuite/ld-powerpc/notoc.s: New tests. * testsuite/ld-powerpc/powerpc.exp: Run them.
2018-08-03 16:41:22 +09:30
8000000000000008: (00 00 00 60|60 00 00 00) nop
800000000000000c: (20 00 80 4e|4e 80 00 20) blr
Reference in New Issue Copy Permalink