record: set stop_pc in "record goto" command
When navigating in the recorded execution trace via "record goto", we do not
set stop_pc. This may trigger an internal error in infrun.c when stepping
from that location. Set it.
(gdb) rec full
(gdb) c
Continuing.
Breakpoint 1, foo (void) at foo.c:42
42 x = y
(gdb) rn
foo (void)
at foo.c:41
41 y = x
(gdb) rec go end
Go forward to insn number 98724
at foo.c:42
42 x = y
(gdb) n
infrun.c:2382: internal-error: resume: Assertion `sig != GDB_SIGNAL_0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
This happens because there's a breakpoint at PC when the "next"
is issued, so that breapoint should be immediately stepped over.
That should have been detected/done by proceed, here:
if (addr == (CORE_ADDR) -1)
{
if (pc == stop_pc
&& breakpoint_here_p (aspace, pc) == ordinary_breakpoint_here
&& execution_direction != EXEC_REVERSE)
/* There is a breakpoint at the address we will resume at,
step one instruction before inserting breakpoints so that
we do not stop right away (and report a second hit at this
breakpoint).
Note, we don't do this in reverse, because we won't
actually be executing the breakpoint insn anyway.
We'll be (un-)executing the previous instruction. */
tp->stepping_over_breakpoint = 1;
But since stop_pc was stale, the pc == stop_pc check failed, and left the
breakpont at PC inserted.
gdb/
* record-btrace.c (record_btrace_goto_begin, record_btrace_goto_end)
record_btrace_goto): Move call to print_stack_frame ...
(record_btrace_set_replay): ... here. Set stop_pc.
* record-full.c (record_full_goto_entry): Set stop_pc.
testsuite/
* gdb.btrace/record_goto-step.exp: New.
2015-07-06 16:36:45 +02:00
|
|
|
# This testcase is part of GDB, the GNU debugger.
|
|
|
|
|
#
|
2017-01-01 07:50:51 +01:00
|
|
|
# Copyright 2013-2017 Free Software Foundation, Inc.
|
record: set stop_pc in "record goto" command
When navigating in the recorded execution trace via "record goto", we do not
set stop_pc. This may trigger an internal error in infrun.c when stepping
from that location. Set it.
(gdb) rec full
(gdb) c
Continuing.
Breakpoint 1, foo (void) at foo.c:42
42 x = y
(gdb) rn
foo (void)
at foo.c:41
41 y = x
(gdb) rec go end
Go forward to insn number 98724
at foo.c:42
42 x = y
(gdb) n
infrun.c:2382: internal-error: resume: Assertion `sig != GDB_SIGNAL_0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
This happens because there's a breakpoint at PC when the "next"
is issued, so that breapoint should be immediately stepped over.
That should have been detected/done by proceed, here:
if (addr == (CORE_ADDR) -1)
{
if (pc == stop_pc
&& breakpoint_here_p (aspace, pc) == ordinary_breakpoint_here
&& execution_direction != EXEC_REVERSE)
/* There is a breakpoint at the address we will resume at,
step one instruction before inserting breakpoints so that
we do not stop right away (and report a second hit at this
breakpoint).
Note, we don't do this in reverse, because we won't
actually be executing the breakpoint insn anyway.
We'll be (un-)executing the previous instruction. */
tp->stepping_over_breakpoint = 1;
But since stop_pc was stale, the pc == stop_pc check failed, and left the
breakpont at PC inserted.
gdb/
* record-btrace.c (record_btrace_goto_begin, record_btrace_goto_end)
record_btrace_goto): Move call to print_stack_frame ...
(record_btrace_set_replay): ... here. Set stop_pc.
* record-full.c (record_full_goto_entry): Set stop_pc.
testsuite/
* gdb.btrace/record_goto-step.exp: New.
2015-07-06 16:36:45 +02:00
|
|
|
#
|
|
|
|
|
# Contributed by Intel Corp. <markus.t.metzger@intel.com>
|
|
|
|
|
#
|
|
|
|
|
# This program is free software; you can redistribute it and/or modify
|
|
|
|
|
# it under the terms of the GNU General Public License as published by
|
|
|
|
|
# the Free Software Foundation; either version 3 of the License, or
|
|
|
|
|
# (at your option) any later version.
|
|
|
|
|
#
|
|
|
|
|
# This program is distributed in the hope that it will be useful,
|
|
|
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
# GNU General Public License for more details.
|
|
|
|
|
#
|
|
|
|
|
# You should have received a copy of the GNU General Public License
|
|
|
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
|
|
2016-12-09 13:16:22 +01:00
|
|
|
if { [skip_btrace_tests] } {
|
|
|
|
|
unsupported "target does not support record-btrace"
|
|
|
|
|
return -1
|
|
|
|
|
}
|
record: set stop_pc in "record goto" command
When navigating in the recorded execution trace via "record goto", we do not
set stop_pc. This may trigger an internal error in infrun.c when stepping
from that location. Set it.
(gdb) rec full
(gdb) c
Continuing.
Breakpoint 1, foo (void) at foo.c:42
42 x = y
(gdb) rn
foo (void)
at foo.c:41
41 y = x
(gdb) rec go end
Go forward to insn number 98724
at foo.c:42
42 x = y
(gdb) n
infrun.c:2382: internal-error: resume: Assertion `sig != GDB_SIGNAL_0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
This happens because there's a breakpoint at PC when the "next"
is issued, so that breapoint should be immediately stepped over.
That should have been detected/done by proceed, here:
if (addr == (CORE_ADDR) -1)
{
if (pc == stop_pc
&& breakpoint_here_p (aspace, pc) == ordinary_breakpoint_here
&& execution_direction != EXEC_REVERSE)
/* There is a breakpoint at the address we will resume at,
step one instruction before inserting breakpoints so that
we do not stop right away (and report a second hit at this
breakpoint).
Note, we don't do this in reverse, because we won't
actually be executing the breakpoint insn anyway.
We'll be (un-)executing the previous instruction. */
tp->stepping_over_breakpoint = 1;
But since stop_pc was stale, the pc == stop_pc check failed, and left the
breakpont at PC inserted.
gdb/
* record-btrace.c (record_btrace_goto_begin, record_btrace_goto_end)
record_btrace_goto): Move call to print_stack_frame ...
(record_btrace_set_replay): ... here. Set stop_pc.
* record-full.c (record_full_goto_entry): Set stop_pc.
testsuite/
* gdb.btrace/record_goto-step.exp: New.
2015-07-06 16:36:45 +02:00
|
|
|
|
|
|
|
|
standard_testfile record_goto.c
|
2016-12-23 17:52:18 +01:00
|
|
|
if [prepare_for_testing "failed to prepare" $testfile $srcfile] {
|
record: set stop_pc in "record goto" command
When navigating in the recorded execution trace via "record goto", we do not
set stop_pc. This may trigger an internal error in infrun.c when stepping
from that location. Set it.
(gdb) rec full
(gdb) c
Continuing.
Breakpoint 1, foo (void) at foo.c:42
42 x = y
(gdb) rn
foo (void)
at foo.c:41
41 y = x
(gdb) rec go end
Go forward to insn number 98724
at foo.c:42
42 x = y
(gdb) n
infrun.c:2382: internal-error: resume: Assertion `sig != GDB_SIGNAL_0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
This happens because there's a breakpoint at PC when the "next"
is issued, so that breapoint should be immediately stepped over.
That should have been detected/done by proceed, here:
if (addr == (CORE_ADDR) -1)
{
if (pc == stop_pc
&& breakpoint_here_p (aspace, pc) == ordinary_breakpoint_here
&& execution_direction != EXEC_REVERSE)
/* There is a breakpoint at the address we will resume at,
step one instruction before inserting breakpoints so that
we do not stop right away (and report a second hit at this
breakpoint).
Note, we don't do this in reverse, because we won't
actually be executing the breakpoint insn anyway.
We'll be (un-)executing the previous instruction. */
tp->stepping_over_breakpoint = 1;
But since stop_pc was stale, the pc == stop_pc check failed, and left the
breakpont at PC inserted.
gdb/
* record-btrace.c (record_btrace_goto_begin, record_btrace_goto_end)
record_btrace_goto): Move call to print_stack_frame ...
(record_btrace_set_replay): ... here. Set stop_pc.
* record-full.c (record_full_goto_entry): Set stop_pc.
testsuite/
* gdb.btrace/record_goto-step.exp: New.
2015-07-06 16:36:45 +02:00
|
|
|
return -1
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if ![runto_main] {
|
2016-12-09 13:16:22 +01:00
|
|
|
untested "failed to run to main"
|
record: set stop_pc in "record goto" command
When navigating in the recorded execution trace via "record goto", we do not
set stop_pc. This may trigger an internal error in infrun.c when stepping
from that location. Set it.
(gdb) rec full
(gdb) c
Continuing.
Breakpoint 1, foo (void) at foo.c:42
42 x = y
(gdb) rn
foo (void)
at foo.c:41
41 y = x
(gdb) rec go end
Go forward to insn number 98724
at foo.c:42
42 x = y
(gdb) n
infrun.c:2382: internal-error: resume: Assertion `sig != GDB_SIGNAL_0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
This happens because there's a breakpoint at PC when the "next"
is issued, so that breapoint should be immediately stepped over.
That should have been detected/done by proceed, here:
if (addr == (CORE_ADDR) -1)
{
if (pc == stop_pc
&& breakpoint_here_p (aspace, pc) == ordinary_breakpoint_here
&& execution_direction != EXEC_REVERSE)
/* There is a breakpoint at the address we will resume at,
step one instruction before inserting breakpoints so that
we do not stop right away (and report a second hit at this
breakpoint).
Note, we don't do this in reverse, because we won't
actually be executing the breakpoint insn anyway.
We'll be (un-)executing the previous instruction. */
tp->stepping_over_breakpoint = 1;
But since stop_pc was stale, the pc == stop_pc check failed, and left the
breakpont at PC inserted.
gdb/
* record-btrace.c (record_btrace_goto_begin, record_btrace_goto_end)
record_btrace_goto): Move call to print_stack_frame ...
(record_btrace_set_replay): ... here. Set stop_pc.
* record-full.c (record_full_goto_entry): Set stop_pc.
testsuite/
* gdb.btrace/record_goto-step.exp: New.
2015-07-06 16:36:45 +02:00
|
|
|
return -1
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
set bp [gdb_get_line_number "fun4.3" $srcfile]
|
|
|
|
|
gdb_breakpoint $srcfile:$bp
|
|
|
|
|
|
|
|
|
|
# record the execution until we hit a breakpoint
|
|
|
|
|
gdb_test_no_output "record btrace"
|
|
|
|
|
gdb_continue_to_breakpoint "cont to $bp" ".*fun4\.3.*"
|
|
|
|
|
|
|
|
|
|
# reverse-step, then jump to the end of the trace
|
|
|
|
|
gdb_test "reverse-next" ".*fun4\.2.*"
|
|
|
|
|
gdb_test "record goto end" ".*fun4\.3.*"
|
|
|
|
|
|
|
|
|
|
# test that we can step away from a breakpoint after jumping to
|
|
|
|
|
# the breakpoint PC
|
|
|
|
|
gdb_test "next" ".*fun4\.4.*"
|