move some rsp bits into rsp-low.h
This moves various low-level remote serial protocol bits into
common/rsp-low.[ch].
This is as close to a pure move as possible. There are some
redundancies remaining but those will be dealt with in a subsequent
patch.
Note that the two variants of remote_escape_output disagreed on the
treatment of "*". On the theory that quoting cannot hurt but the
absence possibly can, I chose the gdbserver variant to be the
canonical one.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
* remote.c: Include rsp-low.h.
(hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
(fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
(remote_unescape_input): Move to common/rsp-low.c.
* common/rsp-low.h: New file.
* common/rsp-low.c: New file.
* Makefile.in (SFILES): Add common/rsp-low.c.
(HFILES_NO_SRCDIR): Add common/rsp-low.h.
(COMMON_OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* server.c: Include rsp-low.h.
* remote-utils.h (convert_ascii_to_int, convert_int_to_ascii)
(unhexify, hexify, remote_escape_output, unpack_varlen_hex): Don't
declare.
* remote-utils.c: Include rsp-low.h.
(fromhex, hexchars, ishex, unhexify, tohex, hexify)
(remote_escape_output, remote_unescape_input, unpack_varlen_hex)
(convert_int_to_ascii, convert_ascii_to_int): Move to
common/rsp-low.c.
* regcache.c: Include rsp-low.h.
* ax.c: Include rsp-low.h.
* Makefile.in (SFILES): Add common/rsp-low.c.
(OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-01-18 22:32:47 +01:00
|
|
|
/* Low-level RSP routines for GDB, the GNU debugger.
|
|
|
|
|
2020-01-01 07:20:01 +01:00
|
|
|
Copyright (C) 1988-2020 Free Software Foundation, Inc.
|
move some rsp bits into rsp-low.h
This moves various low-level remote serial protocol bits into
common/rsp-low.[ch].
This is as close to a pure move as possible. There are some
redundancies remaining but those will be dealt with in a subsequent
patch.
Note that the two variants of remote_escape_output disagreed on the
treatment of "*". On the theory that quoting cannot hurt but the
absence possibly can, I chose the gdbserver variant to be the
canonical one.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
* remote.c: Include rsp-low.h.
(hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
(fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
(remote_unescape_input): Move to common/rsp-low.c.
* common/rsp-low.h: New file.
* common/rsp-low.c: New file.
* Makefile.in (SFILES): Add common/rsp-low.c.
(HFILES_NO_SRCDIR): Add common/rsp-low.h.
(COMMON_OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* server.c: Include rsp-low.h.
* remote-utils.h (convert_ascii_to_int, convert_int_to_ascii)
(unhexify, hexify, remote_escape_output, unpack_varlen_hex): Don't
declare.
* remote-utils.c: Include rsp-low.h.
(fromhex, hexchars, ishex, unhexify, tohex, hexify)
(remote_escape_output, remote_unescape_input, unpack_varlen_hex)
(convert_int_to_ascii, convert_ascii_to_int): Move to
common/rsp-low.c.
* regcache.c: Include rsp-low.h.
* ax.c: Include rsp-low.h.
* Makefile.in (SFILES): Add common/rsp-low.c.
(OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-01-18 22:32:47 +01:00
|
|
|
|
|
|
|
This file is part of GDB.
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
|
|
|
|
#ifndef COMMON_RSP_LOW_H
|
|
|
|
#define COMMON_RSP_LOW_H
|
|
|
|
|
Rename common to gdbsupport
This is the next patch in the ongoing series to move gdbsever to the
top level.
This patch just renames the "common" directory. The idea is to do
this move in two parts: first rename the directory (this patch), then
move the directory to the top. This approach makes the patches a bit
more tractable.
I chose the name "gdbsupport" for the directory. However, as this
patch was largely written by sed, we could pick a new name without too
much difficulty.
Tested by the buildbot.
gdb/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* contrib/ari/gdb_ari.sh: Change common to gdbsupport.
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* gdbsupport: Rename from common.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES)
(HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to
gdbsupport.
* aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c,
amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c,
amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c,
amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c,
amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c,
arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c,
arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c,
arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c,
arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c,
auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h,
btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c,
charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c,
cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c,
coff-pe-read.c, command.h, compile/compile-c-support.c,
compile/compile-c.h, compile/compile-cplus-symbols.c,
compile/compile-cplus-types.c, compile/compile-cplus.h,
compile/compile-loc2c.c, compile/compile.c, completer.c,
completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c,
cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c,
darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c,
disasm.h, dtrace-probe.c, dwarf-index-cache.c,
dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c,
dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c,
event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c,
features/aarch64-core.c, features/aarch64-fpu.c,
features/aarch64-pauth.c, features/aarch64-sve.c,
features/i386/32bit-avx.c, features/i386/32bit-avx512.c,
features/i386/32bit-core.c, features/i386/32bit-linux.c,
features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c,
features/i386/32bit-segments.c, features/i386/32bit-sse.c,
features/i386/64bit-avx.c, features/i386/64bit-avx512.c,
features/i386/64bit-core.c, features/i386/64bit-linux.c,
features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c,
features/i386/64bit-segments.c, features/i386/64bit-sse.c,
features/i386/x32-core.c, features/riscv/32bit-cpu.c,
features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c,
features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c,
features/riscv/64bit-fpu.c, features/tic6x-c6xp.c,
features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h,
findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h,
gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c,
gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c,
go32-nat.c, guile/guile.c, guile/scm-ports.c,
guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c,
i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c,
i386-linux-tdep.c, i386-tdep.c, i387-tdep.c,
ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c,
inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h,
inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h,
inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c,
linux-tdep.c, linux-thread-db.c, location.c, machoread.c,
macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h,
mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c,
mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h,
minsyms.c, mips-linux-tdep.c, namespace.h,
nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h,
nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c,
nat/amd64-linux-siginfo.c, nat/fork-inferior.c,
nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c,
nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c,
nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h,
nat/linux-waitpid.c, nat/mips-linux-watch.c,
nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c,
nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c,
nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h,
obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c,
parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c,
procfs.c, producer.c, progspace.h, psymtab.h,
python/py-framefilter.c, python/py-inferior.c, python/py-ref.h,
python/py-type.c, python/python.c, record-btrace.c, record-full.c,
record.c, record.h, regcache-dump.c, regcache.c, regcache.h,
remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c,
riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c,
selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c,
ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c,
source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c,
stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h,
symtab.c, symtab.h, target-descriptions.c, target-descriptions.h,
target-memory.c, target.c, target.h, target/waitstatus.c,
target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c,
top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c,
tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h,
unittests/array-view-selftests.c,
unittests/child-path-selftests.c, unittests/cli-utils-selftests.c,
unittests/common-utils-selftests.c,
unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c,
unittests/format_pieces-selftests.c,
unittests/function-view-selftests.c,
unittests/lookup_name_info-selftests.c,
unittests/memory-map-selftests.c, unittests/memrange-selftests.c,
unittests/mkdir-recursive-selftests.c,
unittests/observable-selftests.c,
unittests/offset-type-selftests.c, unittests/optional-selftests.c,
unittests/parse-connection-spec-selftests.c,
unittests/ptid-selftests.c, unittests/rsp-low-selftests.c,
unittests/scoped_fd-selftests.c,
unittests/scoped_mmap-selftests.c,
unittests/scoped_restore-selftests.c,
unittests/string_view-selftests.c, unittests/style-selftests.c,
unittests/tracepoint-selftests.c, unittests/unpack-selftests.c,
unittests/utils-selftests.c, unittests/xml-utils-selftests.c,
utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c,
value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c,
xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c,
xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport.
gdb/gdbserver/ChangeLog
2019-07-09 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac: Change common to gdbsupport.
* acinclude.m4: Change common to gdbsupport.
* Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS)
(version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change
common to gdbsupport.
* ax.c, event-loop.c, fork-child.c, gdb_proc_service.h,
gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c,
inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c,
linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c,
linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c,
linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h,
nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c,
server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h,
thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change
common to gdbsupport.
2019-05-06 04:29:24 +02:00
|
|
|
#include "gdbsupport/byte-vector.h"
|
remote: C++ify thread_item and threads_listing_context
This patch C++ifies the thread_item and threads_listing_context
structures in remote.c. thread_item::{extra,name} are changed to
std::string. As a result, there's a bit of awkwardness in
remote_update_thread_list, where we have to xstrdup those strings when
filling the private_thread_info structure. This is removed in the
following patch, where private_thread_info is also C++ified and its
corresponding fields made std::string too. The xstrdup then becomes an
std::move.
Other than that there's nothing really special, it's a usual day-to-day
VEC -> vector and char* -> std::string change. It allows removing a
cleanup in remote_update_thread_list.
Note that an overload of hex2bin that returns a gdb::byte_vector is
added, with corresponding selftests.
gdb/ChangeLog:
* remote.c (struct thread_item): Add constructor, disable copy
construction and copy assignment, define default move
construction and move assignment.
<extra, name>: Change type to std::string.
<core>: Initialize.
<thread_handle>: Make non-pointer.
(thread_item_t): Remove typedef.
(DEF_VEC_O(thread_item_t)): Remove.
(threads_listing_context) <contains_thread>: New method.
<remove_thread>: New method.
<items>: Change type to std::vector.
(clear_threads_listing_context): Remove.
(threads_listing_context_remove): Remove.
(remote_newthread_step): Use thread_item constructor, adjust to
change to std::vector.
(start_thread): Use thread_item constructor, adjust to change to
std::vector.
(end_thread): Adjust to change to std::vector and std::string.
(remote_get_threads_with_qthreadinfo): Use thread_item
constructor, adjust to std::vector.
(remote_update_thread_list): Adjust to change to std::vector and
std::string, use threads_listing_context methods.
(remove_child_of_pending_fork): Adjust.
(remove_new_fork_children): Adjust.
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add rsp-low-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add rsp-low-selftests.o.
* unittests/rsp-low-selftests.c: New file.
* common/rsp-low.h: Include common/byte-vector.h.
(hex2bin): New overload.
* common/rsp-low.c (hex2bin): New overload.
2017-11-24 16:40:13 +01:00
|
|
|
|
move some rsp bits into rsp-low.h
This moves various low-level remote serial protocol bits into
common/rsp-low.[ch].
This is as close to a pure move as possible. There are some
redundancies remaining but those will be dealt with in a subsequent
patch.
Note that the two variants of remote_escape_output disagreed on the
treatment of "*". On the theory that quoting cannot hurt but the
absence possibly can, I chose the gdbserver variant to be the
canonical one.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
* remote.c: Include rsp-low.h.
(hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
(fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
(remote_unescape_input): Move to common/rsp-low.c.
* common/rsp-low.h: New file.
* common/rsp-low.c: New file.
* Makefile.in (SFILES): Add common/rsp-low.c.
(HFILES_NO_SRCDIR): Add common/rsp-low.h.
(COMMON_OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* server.c: Include rsp-low.h.
* remote-utils.h (convert_ascii_to_int, convert_int_to_ascii)
(unhexify, hexify, remote_escape_output, unpack_varlen_hex): Don't
declare.
* remote-utils.c: Include rsp-low.h.
(fromhex, hexchars, ishex, unhexify, tohex, hexify)
(remote_escape_output, remote_unescape_input, unpack_varlen_hex)
(convert_int_to_ascii, convert_ascii_to_int): Move to
common/rsp-low.c.
* regcache.c: Include rsp-low.h.
* ax.c: Include rsp-low.h.
* Makefile.in (SFILES): Add common/rsp-low.c.
(OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-01-18 22:32:47 +01:00
|
|
|
/* Convert hex digit A to a number, or throw an exception. */
|
|
|
|
|
|
|
|
extern int fromhex (int a);
|
|
|
|
|
|
|
|
/* Convert number NIB to a hex digit. */
|
|
|
|
|
|
|
|
extern int tohex (int nib);
|
|
|
|
|
2014-01-20 18:38:07 +01:00
|
|
|
/* Write a character representing the low order four bits of NIBBLE in
|
|
|
|
hex to *BUF. Returns BUF+1. */
|
|
|
|
|
move some rsp bits into rsp-low.h
This moves various low-level remote serial protocol bits into
common/rsp-low.[ch].
This is as close to a pure move as possible. There are some
redundancies remaining but those will be dealt with in a subsequent
patch.
Note that the two variants of remote_escape_output disagreed on the
treatment of "*". On the theory that quoting cannot hurt but the
absence possibly can, I chose the gdbserver variant to be the
canonical one.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
* remote.c: Include rsp-low.h.
(hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
(fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
(remote_unescape_input): Move to common/rsp-low.c.
* common/rsp-low.h: New file.
* common/rsp-low.c: New file.
* Makefile.in (SFILES): Add common/rsp-low.c.
(HFILES_NO_SRCDIR): Add common/rsp-low.h.
(COMMON_OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* server.c: Include rsp-low.h.
* remote-utils.h (convert_ascii_to_int, convert_int_to_ascii)
(unhexify, hexify, remote_escape_output, unpack_varlen_hex): Don't
declare.
* remote-utils.c: Include rsp-low.h.
(fromhex, hexchars, ishex, unhexify, tohex, hexify)
(remote_escape_output, remote_unescape_input, unpack_varlen_hex)
(convert_int_to_ascii, convert_ascii_to_int): Move to
common/rsp-low.c.
* regcache.c: Include rsp-low.h.
* ax.c: Include rsp-low.h.
* Makefile.in (SFILES): Add common/rsp-low.c.
(OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-01-18 22:32:47 +01:00
|
|
|
extern char *pack_nibble (char *buf, int nibble);
|
|
|
|
|
2014-01-20 18:38:07 +01:00
|
|
|
/* Write the low byte of BYTE in hex to *BUF. Returns BUF+2. */
|
|
|
|
|
move some rsp bits into rsp-low.h
This moves various low-level remote serial protocol bits into
common/rsp-low.[ch].
This is as close to a pure move as possible. There are some
redundancies remaining but those will be dealt with in a subsequent
patch.
Note that the two variants of remote_escape_output disagreed on the
treatment of "*". On the theory that quoting cannot hurt but the
absence possibly can, I chose the gdbserver variant to be the
canonical one.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
* remote.c: Include rsp-low.h.
(hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
(fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
(remote_unescape_input): Move to common/rsp-low.c.
* common/rsp-low.h: New file.
* common/rsp-low.c: New file.
* Makefile.in (SFILES): Add common/rsp-low.c.
(HFILES_NO_SRCDIR): Add common/rsp-low.h.
(COMMON_OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* server.c: Include rsp-low.h.
* remote-utils.h (convert_ascii_to_int, convert_int_to_ascii)
(unhexify, hexify, remote_escape_output, unpack_varlen_hex): Don't
declare.
* remote-utils.c: Include rsp-low.h.
(fromhex, hexchars, ishex, unhexify, tohex, hexify)
(remote_escape_output, remote_unescape_input, unpack_varlen_hex)
(convert_int_to_ascii, convert_ascii_to_int): Move to
common/rsp-low.c.
* regcache.c: Include rsp-low.h.
* ax.c: Include rsp-low.h.
* Makefile.in (SFILES): Add common/rsp-low.c.
(OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-01-18 22:32:47 +01:00
|
|
|
extern char *pack_hex_byte (char *pkt, int byte);
|
|
|
|
|
2014-01-20 18:38:07 +01:00
|
|
|
/* Read hex digits from BUFF and convert to a number, which is stored
|
|
|
|
in RESULT. Reads until a non-hex digit is seen. Returns a pointer
|
|
|
|
to the terminating character. */
|
|
|
|
|
Constify unpack_varlen_hex & fix fallout
I ran into non-const unpack_varlen_hex while working on something
else, and decided to just fix it first. Ends up constifying a good
deal of remote packet parsing.
gdb/ChangeLog:
2017-09-29 Pedro Alves <palves@redhat.com>
* common/rsp-low.c (unpack_varlen_hex): Constify.
* common/rsp-low.h (unpack_varlen_hex): Constify.
* linux-nat.c (linux_child_static_tracepoint_markers_by_strid):
Constify.
* remote.c (remote_set_permissions, read_ptid)
(remote_current_thread, remote_get_threads_with_qthreadinfo)
(remote_static_tracepoint_marker_at)
(remote_static_tracepoint_markers_by_strid)
(stop_reply_extract_thread, remote_parse_stop_reply): Constify.
* tracepoint.c (parse_trace_status, parse_tracepoint_status)
(parse_tracepoint_definition, parse_tsv_definition)
(parse_static_tracepoint_marker_definition): Constify.
* tracepoint.h (parse_static_tracepoint_marker_definition)
(parse_trace_status, parse_tracepoint_status)
(parse_tracepoint_definition, parse_tsv_definition): Constify.
gdb/gdbserver/ChangeLog:
2017-09-29 Pedro Alves <palves@redhat.com>
* ax.c (gdb_parse_agent_expr): Constify.
* ax.h (gdb_parse_agent_expr): Constify.
* mem-break.c (add_breakpoint_condition, add_breakpoint_commands):
Constify.
* mem-break.h (add_breakpoint_condition, add_breakpoint_commands): Constify.
* remote-utils.c (hex_or_minus_one, read_ptid): Constify.
* remote-utils.h (read_ptid): Constify.
* server.c (handle_qxfer_exec_file, handle_query, handle_v_cont)
(process_point_options, process_serial_event): Constify.
* tracepoint.c (add_tracepoint_action, cmd_qtdp, cmd_qtdpsrc)
(cmd_qtdv, cmd_qtenable_disable, cmd_qtro, cmd_qtframe, cmd_qtp)
(cmd_qtbuffer): Constify.
2017-09-29 18:15:36 +02:00
|
|
|
extern const char *unpack_varlen_hex (const char *buff, ULONGEST *result);
|
move some rsp bits into rsp-low.h
This moves various low-level remote serial protocol bits into
common/rsp-low.[ch].
This is as close to a pure move as possible. There are some
redundancies remaining but those will be dealt with in a subsequent
patch.
Note that the two variants of remote_escape_output disagreed on the
treatment of "*". On the theory that quoting cannot hurt but the
absence possibly can, I chose the gdbserver variant to be the
canonical one.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
* remote.c: Include rsp-low.h.
(hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
(fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
(remote_unescape_input): Move to common/rsp-low.c.
* common/rsp-low.h: New file.
* common/rsp-low.c: New file.
* Makefile.in (SFILES): Add common/rsp-low.c.
(HFILES_NO_SRCDIR): Add common/rsp-low.h.
(COMMON_OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* server.c: Include rsp-low.h.
* remote-utils.h (convert_ascii_to_int, convert_int_to_ascii)
(unhexify, hexify, remote_escape_output, unpack_varlen_hex): Don't
declare.
* remote-utils.c: Include rsp-low.h.
(fromhex, hexchars, ishex, unhexify, tohex, hexify)
(remote_escape_output, remote_unescape_input, unpack_varlen_hex)
(convert_int_to_ascii, convert_ascii_to_int): Move to
common/rsp-low.c.
* regcache.c: Include rsp-low.h.
* ax.c: Include rsp-low.h.
* Makefile.in (SFILES): Add common/rsp-low.c.
(OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-01-18 22:32:47 +01:00
|
|
|
|
2014-01-20 18:38:07 +01:00
|
|
|
/* HEX is a string of characters representing hexadecimal digits.
|
|
|
|
Convert pairs of hex digits to bytes and store sequentially into
|
|
|
|
BIN. COUNT is the maximum number of characters to convert. This
|
|
|
|
will convert fewer characters if the number of hex characters
|
|
|
|
actually seen is odd, or if HEX terminates before COUNT characters.
|
|
|
|
Returns the number of characters actually converted. */
|
|
|
|
|
move some rsp bits into rsp-low.h
This moves various low-level remote serial protocol bits into
common/rsp-low.[ch].
This is as close to a pure move as possible. There are some
redundancies remaining but those will be dealt with in a subsequent
patch.
Note that the two variants of remote_escape_output disagreed on the
treatment of "*". On the theory that quoting cannot hurt but the
absence possibly can, I chose the gdbserver variant to be the
canonical one.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
* remote.c: Include rsp-low.h.
(hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
(fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
(remote_unescape_input): Move to common/rsp-low.c.
* common/rsp-low.h: New file.
* common/rsp-low.c: New file.
* Makefile.in (SFILES): Add common/rsp-low.c.
(HFILES_NO_SRCDIR): Add common/rsp-low.h.
(COMMON_OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* server.c: Include rsp-low.h.
* remote-utils.h (convert_ascii_to_int, convert_int_to_ascii)
(unhexify, hexify, remote_escape_output, unpack_varlen_hex): Don't
declare.
* remote-utils.c: Include rsp-low.h.
(fromhex, hexchars, ishex, unhexify, tohex, hexify)
(remote_escape_output, remote_unescape_input, unpack_varlen_hex)
(convert_int_to_ascii, convert_ascii_to_int): Move to
common/rsp-low.c.
* regcache.c: Include rsp-low.h.
* ax.c: Include rsp-low.h.
* Makefile.in (SFILES): Add common/rsp-low.c.
(OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-01-18 22:32:47 +01:00
|
|
|
extern int hex2bin (const char *hex, gdb_byte *bin, int count);
|
|
|
|
|
remote: C++ify thread_item and threads_listing_context
This patch C++ifies the thread_item and threads_listing_context
structures in remote.c. thread_item::{extra,name} are changed to
std::string. As a result, there's a bit of awkwardness in
remote_update_thread_list, where we have to xstrdup those strings when
filling the private_thread_info structure. This is removed in the
following patch, where private_thread_info is also C++ified and its
corresponding fields made std::string too. The xstrdup then becomes an
std::move.
Other than that there's nothing really special, it's a usual day-to-day
VEC -> vector and char* -> std::string change. It allows removing a
cleanup in remote_update_thread_list.
Note that an overload of hex2bin that returns a gdb::byte_vector is
added, with corresponding selftests.
gdb/ChangeLog:
* remote.c (struct thread_item): Add constructor, disable copy
construction and copy assignment, define default move
construction and move assignment.
<extra, name>: Change type to std::string.
<core>: Initialize.
<thread_handle>: Make non-pointer.
(thread_item_t): Remove typedef.
(DEF_VEC_O(thread_item_t)): Remove.
(threads_listing_context) <contains_thread>: New method.
<remove_thread>: New method.
<items>: Change type to std::vector.
(clear_threads_listing_context): Remove.
(threads_listing_context_remove): Remove.
(remote_newthread_step): Use thread_item constructor, adjust to
change to std::vector.
(start_thread): Use thread_item constructor, adjust to change to
std::vector.
(end_thread): Adjust to change to std::vector and std::string.
(remote_get_threads_with_qthreadinfo): Use thread_item
constructor, adjust to std::vector.
(remote_update_thread_list): Adjust to change to std::vector and
std::string, use threads_listing_context methods.
(remove_child_of_pending_fork): Adjust.
(remove_new_fork_children): Adjust.
* Makefile.in (SUBDIR_UNITTESTS_SRCS): Add rsp-low-selftests.c.
(SUBDIR_UNITTESTS_OBS): Add rsp-low-selftests.o.
* unittests/rsp-low-selftests.c: New file.
* common/rsp-low.h: Include common/byte-vector.h.
(hex2bin): New overload.
* common/rsp-low.c (hex2bin): New overload.
2017-11-24 16:40:13 +01:00
|
|
|
/* Like the above, but return a gdb::byte_vector. */
|
|
|
|
|
|
|
|
gdb::byte_vector hex2bin (const char *hex);
|
|
|
|
|
Implement the ability to set/unset environment variables to GDBserver when starting the inferior
This patch implements the ability to set/unset environment variables
on the remote target, mimicking what GDB already offers to the user.
There are two features present here: user-set and user-unset
environment variables.
User-set environment variables are only the variables that are
explicitly set by the user, using the 'set environment' command. This
means that variables that were already present in the environment when
starting GDB/GDBserver are not transmitted/considered by this feature.
User-unset environment variables are variables that are explicitly
unset by the user, using the 'unset environment' command.
The idea behind this patch is to store user-set and user-unset
environment variables in two separate sets, both part of gdb_environ.
Then, when extended_remote_create_inferior is preparing to start the
inferior, it will iterate over the two sets and set/unset variables
accordingly. Three new packets are introduced:
- QEnvironmentHexEncoded, which is used to set environment variables,
and contains an hex-encoded string in the format "VAR=VALUE" (VALUE
can be empty if the user set a variable with a null value, by doing
'set environment VAR=').
- QEnvironmentUnset, which is used to unset environment variables, and
contains an hex-encoded string in the format "VAR".
- QEnvironmentReset, which is always the first packet to be
transmitted, and is used to reset the environment, i.e., discard any
changes made by the user on previous runs.
The QEnvironmentHexEncoded packet is inspired on LLDB's extensions to
the RSP. Details about it can be seen here:
<https://raw.githubusercontent.com/llvm-mirror/lldb/master/docs/lldb-gdb-remote.txt>
I decided not to implement the QEnvironment packet because it is
considered deprecated by LLDB. This packet, on LLDB, serves the same
purpose of QEnvironmentHexEncoded, but sends the information using a
plain text, non-hex-encoded string.
The other two packets are new.
This patch also includes updates to the documentation, testsuite, and
unit tests, without introducing regressions.
gdb/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0): Add entry mentioning new support
for setting/unsetting environment variables on the remote target.
(New remote packets): Add entries for QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset.
* common/environ.c (gdb_environ::operator=): Extend method to
handle m_user_set_env_list and m_user_unset_env_list.
(gdb_environ::clear): Likewise.
(match_var_in_string): Change type of first parameter from 'char
*' to 'const char *'.
(gdb_environ::set): Extend method to handle
m_user_set_env_list and m_user_unset_env_list.
(gdb_environ::unset): Likewise.
(gdb_environ::clear_user_set_env): New method.
(gdb_environ::user_set_envp): Likewise.
(gdb_environ::user_unset_envp): Likewise.
* common/environ.h (gdb_environ): Handle m_user_set_env_list and
m_user_unset_env_list on move constructor/assignment.
(unset): Add new default parameter 'update_unset_list = true'.
(clear_user_set_env): New method.
(user_set_envp): Likewise.
(user_unset_envp): Likewise.
(m_user_set_env_list): New std::set.
(m_user_unset_env_list): Likewise.
* common/rsp-low.c (hex2str): New function.
(bin2hex): New overload for bin2hex function.
* common/rsp-low.c (hex2str): New prototype.
(str2hex): New overload prototype.
* remote.c: Include "environ.h". Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset.
(remote_protocol_features): Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packets.
(send_environment_packet): New function.
(extended_remote_environment_support): Likewise.
(extended_remote_create_inferior): Call
extended_remote_environment_support.
(_initialize_remote): Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packet configs.
* unittests/environ-selftests.c (gdb_selftest_env_var):
New variable.
(test_vector_initialization): New function.
(test_init_from_host_environ): Likewise.
(test_reinit_from_host_environ): Likewise.
(test_set_A_unset_B_unset_A_cannot_find_A_can_find_B):
Likewise.
(test_unset_set_empty_vector): Likewise.
(test_vector_clear): Likewise.
(test_std_move): Likewise.
(test_move_constructor):
(test_self_move): Likewise.
(test_set_unset_reset): Likewise.
(run_tests): Rewrite in terms of the functions above.
gdb/gdbserver/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (handle_general_set): Handle QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packets.
(handle_query): Inform remote that QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset are supported.
gdb/doc/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (set environment): Add @anchor. Explain that
environment variables set by the user are sent to GDBserver.
(unset environment): Likewise, but for unsetting variables.
(Connecting) <Remote Packet>: Add "environment-hex-encoded",
"QEnvironmentHexEncoded", "environment-unset", "QEnvironmentUnset",
"environment-reset" and "QEnvironmentReset" to the table.
(Remote Protocol) <QEnvironmentHexEncoded, QEnvironmentUnset,
QEnvironmentReset>: New item, explaining the packet.
gdb/testsuite/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/share-env-with-gdbserver.c: New file.
* gdb.base/share-env-with-gdbserver.exp: Likewise.
2017-06-29 21:06:07 +02:00
|
|
|
/* Like hex2bin, but return a std::string. */
|
|
|
|
|
|
|
|
extern std::string hex2str (const char *hex);
|
|
|
|
|
2018-03-22 05:27:19 +01:00
|
|
|
/* Like hex2bin, but return a std::string. */
|
|
|
|
|
|
|
|
extern std::string hex2str (const char *hex, int count);
|
|
|
|
|
2014-01-20 18:38:07 +01:00
|
|
|
/* Convert some bytes to a hexadecimal representation. BIN holds the
|
|
|
|
bytes to convert. COUNT says how many bytes to convert. The
|
|
|
|
resulting characters are stored in HEX, followed by a NUL
|
|
|
|
character. Returns the number of bytes actually converted. */
|
|
|
|
|
move some rsp bits into rsp-low.h
This moves various low-level remote serial protocol bits into
common/rsp-low.[ch].
This is as close to a pure move as possible. There are some
redundancies remaining but those will be dealt with in a subsequent
patch.
Note that the two variants of remote_escape_output disagreed on the
treatment of "*". On the theory that quoting cannot hurt but the
absence possibly can, I chose the gdbserver variant to be the
canonical one.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
* remote.c: Include rsp-low.h.
(hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
(fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
(remote_unescape_input): Move to common/rsp-low.c.
* common/rsp-low.h: New file.
* common/rsp-low.c: New file.
* Makefile.in (SFILES): Add common/rsp-low.c.
(HFILES_NO_SRCDIR): Add common/rsp-low.h.
(COMMON_OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* server.c: Include rsp-low.h.
* remote-utils.h (convert_ascii_to_int, convert_int_to_ascii)
(unhexify, hexify, remote_escape_output, unpack_varlen_hex): Don't
declare.
* remote-utils.c: Include rsp-low.h.
(fromhex, hexchars, ishex, unhexify, tohex, hexify)
(remote_escape_output, remote_unescape_input, unpack_varlen_hex)
(convert_int_to_ascii, convert_ascii_to_int): Move to
common/rsp-low.c.
* regcache.c: Include rsp-low.h.
* ax.c: Include rsp-low.h.
* Makefile.in (SFILES): Add common/rsp-low.c.
(OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-01-18 22:32:47 +01:00
|
|
|
extern int bin2hex (const gdb_byte *bin, char *hex, int count);
|
|
|
|
|
Implement the ability to set/unset environment variables to GDBserver when starting the inferior
This patch implements the ability to set/unset environment variables
on the remote target, mimicking what GDB already offers to the user.
There are two features present here: user-set and user-unset
environment variables.
User-set environment variables are only the variables that are
explicitly set by the user, using the 'set environment' command. This
means that variables that were already present in the environment when
starting GDB/GDBserver are not transmitted/considered by this feature.
User-unset environment variables are variables that are explicitly
unset by the user, using the 'unset environment' command.
The idea behind this patch is to store user-set and user-unset
environment variables in two separate sets, both part of gdb_environ.
Then, when extended_remote_create_inferior is preparing to start the
inferior, it will iterate over the two sets and set/unset variables
accordingly. Three new packets are introduced:
- QEnvironmentHexEncoded, which is used to set environment variables,
and contains an hex-encoded string in the format "VAR=VALUE" (VALUE
can be empty if the user set a variable with a null value, by doing
'set environment VAR=').
- QEnvironmentUnset, which is used to unset environment variables, and
contains an hex-encoded string in the format "VAR".
- QEnvironmentReset, which is always the first packet to be
transmitted, and is used to reset the environment, i.e., discard any
changes made by the user on previous runs.
The QEnvironmentHexEncoded packet is inspired on LLDB's extensions to
the RSP. Details about it can be seen here:
<https://raw.githubusercontent.com/llvm-mirror/lldb/master/docs/lldb-gdb-remote.txt>
I decided not to implement the QEnvironment packet because it is
considered deprecated by LLDB. This packet, on LLDB, serves the same
purpose of QEnvironmentHexEncoded, but sends the information using a
plain text, non-hex-encoded string.
The other two packets are new.
This patch also includes updates to the documentation, testsuite, and
unit tests, without introducing regressions.
gdb/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* NEWS (Changes since GDB 8.0): Add entry mentioning new support
for setting/unsetting environment variables on the remote target.
(New remote packets): Add entries for QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset.
* common/environ.c (gdb_environ::operator=): Extend method to
handle m_user_set_env_list and m_user_unset_env_list.
(gdb_environ::clear): Likewise.
(match_var_in_string): Change type of first parameter from 'char
*' to 'const char *'.
(gdb_environ::set): Extend method to handle
m_user_set_env_list and m_user_unset_env_list.
(gdb_environ::unset): Likewise.
(gdb_environ::clear_user_set_env): New method.
(gdb_environ::user_set_envp): Likewise.
(gdb_environ::user_unset_envp): Likewise.
* common/environ.h (gdb_environ): Handle m_user_set_env_list and
m_user_unset_env_list on move constructor/assignment.
(unset): Add new default parameter 'update_unset_list = true'.
(clear_user_set_env): New method.
(user_set_envp): Likewise.
(user_unset_envp): Likewise.
(m_user_set_env_list): New std::set.
(m_user_unset_env_list): Likewise.
* common/rsp-low.c (hex2str): New function.
(bin2hex): New overload for bin2hex function.
* common/rsp-low.c (hex2str): New prototype.
(str2hex): New overload prototype.
* remote.c: Include "environ.h". Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset.
(remote_protocol_features): Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packets.
(send_environment_packet): New function.
(extended_remote_environment_support): Likewise.
(extended_remote_create_inferior): Call
extended_remote_environment_support.
(_initialize_remote): Add QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packet configs.
* unittests/environ-selftests.c (gdb_selftest_env_var):
New variable.
(test_vector_initialization): New function.
(test_init_from_host_environ): Likewise.
(test_reinit_from_host_environ): Likewise.
(test_set_A_unset_B_unset_A_cannot_find_A_can_find_B):
Likewise.
(test_unset_set_empty_vector): Likewise.
(test_vector_clear): Likewise.
(test_std_move): Likewise.
(test_move_constructor):
(test_self_move): Likewise.
(test_set_unset_reset): Likewise.
(run_tests): Rewrite in terms of the functions above.
gdb/gdbserver/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* server.c (handle_general_set): Handle QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset packets.
(handle_query): Inform remote that QEnvironmentHexEncoded,
QEnvironmentUnset and QEnvironmentReset are supported.
gdb/doc/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (set environment): Add @anchor. Explain that
environment variables set by the user are sent to GDBserver.
(unset environment): Likewise, but for unsetting variables.
(Connecting) <Remote Packet>: Add "environment-hex-encoded",
"QEnvironmentHexEncoded", "environment-unset", "QEnvironmentUnset",
"environment-reset" and "QEnvironmentReset" to the table.
(Remote Protocol) <QEnvironmentHexEncoded, QEnvironmentUnset,
QEnvironmentReset>: New item, explaining the packet.
gdb/testsuite/ChangeLog:
2017-08-31 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.base/share-env-with-gdbserver.c: New file.
* gdb.base/share-env-with-gdbserver.exp: Likewise.
2017-06-29 21:06:07 +02:00
|
|
|
/* Overloaded version of bin2hex that returns a std::string. */
|
|
|
|
|
|
|
|
extern std::string bin2hex (const gdb_byte *bin, int count);
|
|
|
|
|
2015-06-18 19:12:39 +02:00
|
|
|
/* Convert BUFFER, binary data at least LEN_UNITS addressable memory units
|
|
|
|
long, into escaped binary data in OUT_BUF. Only copy memory units that fit
|
|
|
|
completely in OUT_BUF. Set *OUT_LEN_UNITS to the number of units from
|
|
|
|
BUFFER successfully encoded in OUT_BUF, and return the number of bytes used
|
|
|
|
in OUT_BUF. The total number of bytes in the output buffer will be at most
|
|
|
|
OUT_MAXLEN_BYTES. This function properly escapes '*', and so is suitable
|
move some rsp bits into rsp-low.h
This moves various low-level remote serial protocol bits into
common/rsp-low.[ch].
This is as close to a pure move as possible. There are some
redundancies remaining but those will be dealt with in a subsequent
patch.
Note that the two variants of remote_escape_output disagreed on the
treatment of "*". On the theory that quoting cannot hurt but the
absence possibly can, I chose the gdbserver variant to be the
canonical one.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
* remote.c: Include rsp-low.h.
(hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
(fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
(remote_unescape_input): Move to common/rsp-low.c.
* common/rsp-low.h: New file.
* common/rsp-low.c: New file.
* Makefile.in (SFILES): Add common/rsp-low.c.
(HFILES_NO_SRCDIR): Add common/rsp-low.h.
(COMMON_OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* server.c: Include rsp-low.h.
* remote-utils.h (convert_ascii_to_int, convert_int_to_ascii)
(unhexify, hexify, remote_escape_output, unpack_varlen_hex): Don't
declare.
* remote-utils.c: Include rsp-low.h.
(fromhex, hexchars, ishex, unhexify, tohex, hexify)
(remote_escape_output, remote_unescape_input, unpack_varlen_hex)
(convert_int_to_ascii, convert_ascii_to_int): Move to
common/rsp-low.c.
* regcache.c: Include rsp-low.h.
* ax.c: Include rsp-low.h.
* Makefile.in (SFILES): Add common/rsp-low.c.
(OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-01-18 22:32:47 +01:00
|
|
|
for the server side as well as the client. */
|
|
|
|
|
2015-06-18 19:12:39 +02:00
|
|
|
extern int remote_escape_output (const gdb_byte *buffer, int len_units,
|
|
|
|
int unit_size, gdb_byte *out_buf,
|
|
|
|
int *out_len_units, int out_maxlen_bytes);
|
move some rsp bits into rsp-low.h
This moves various low-level remote serial protocol bits into
common/rsp-low.[ch].
This is as close to a pure move as possible. There are some
redundancies remaining but those will be dealt with in a subsequent
patch.
Note that the two variants of remote_escape_output disagreed on the
treatment of "*". On the theory that quoting cannot hurt but the
absence possibly can, I chose the gdbserver variant to be the
canonical one.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* remote.h (hex2bin, bin2hex, unpack_varlen_hex): Don't declare.
* remote.c: Include rsp-low.h.
(hexchars, ishex, unpack_varlen_hex, pack_nibble, pack_hex_byte)
(fromhex, hex2bin, tohex, bin2hex, remote_escape_output)
(remote_unescape_input): Move to common/rsp-low.c.
* common/rsp-low.h: New file.
* common/rsp-low.c: New file.
* Makefile.in (SFILES): Add common/rsp-low.c.
(HFILES_NO_SRCDIR): Add common/rsp-low.h.
(COMMON_OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-02-12 Tom Tromey <tromey@redhat.com>
* tracepoint.c: Include rsp-low.h.
* server.c: Include rsp-low.h.
* remote-utils.h (convert_ascii_to_int, convert_int_to_ascii)
(unhexify, hexify, remote_escape_output, unpack_varlen_hex): Don't
declare.
* remote-utils.c: Include rsp-low.h.
(fromhex, hexchars, ishex, unhexify, tohex, hexify)
(remote_escape_output, remote_unescape_input, unpack_varlen_hex)
(convert_int_to_ascii, convert_ascii_to_int): Move to
common/rsp-low.c.
* regcache.c: Include rsp-low.h.
* ax.c: Include rsp-low.h.
* Makefile.in (SFILES): Add common/rsp-low.c.
(OBS): Add rsp-low.o.
(rsp-low.o): New target.
2014-01-18 22:32:47 +01:00
|
|
|
|
|
|
|
/* Convert BUFFER, escaped data LEN bytes long, into binary data
|
|
|
|
in OUT_BUF. Return the number of bytes written to OUT_BUF.
|
|
|
|
Raise an error if the total number of bytes exceeds OUT_MAXLEN.
|
|
|
|
|
|
|
|
This function reverses remote_escape_output. */
|
|
|
|
|
|
|
|
extern int remote_unescape_input (const gdb_byte *buffer, int len,
|
|
|
|
gdb_byte *out_buf, int out_maxlen);
|
|
|
|
|
|
|
|
#endif /* COMMON_RSP_LOW_H */
|