binutils-gdb/gdb/i386-tdep.c

1246 lines
34 KiB
C
Raw Normal View History

/* Intel 386 target-dependent stuff.
2001-03-06 09:22:02 +01:00
Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
1998, 1999, 2000, 2001
Free Software Foundation, Inc.
1999-07-07 22:19:36 +02:00
This file is part of GDB.
1999-07-07 22:19:36 +02:00
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
1999-07-07 22:19:36 +02:00
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
1999-07-07 22:19:36 +02:00
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "gdb_string.h"
#include "frame.h"
#include "inferior.h"
#include "gdbcore.h"
#include "target.h"
#include "floatformat.h"
#include "symtab.h"
#include "gdbcmd.h"
#include "command.h"
#include "arch-utils.h"
#include "regcache.h"
2001-08-01 20:39:27 +02:00
#include "doublest.h"
#include "gdb_assert.h"
1999-10-19 04:47:02 +02:00
/* i386_register_byte[i] is the offset into the register file of the
start of register number i. We initialize this from
i386_register_raw_size. */
int i386_register_byte[MAX_NUM_REGS];
2000-02-23 23:11:07 +01:00
/* i386_register_raw_size[i] is the number of bytes of storage in
GDB's register array occupied by register i. */
1999-10-19 04:47:02 +02:00
int i386_register_raw_size[MAX_NUM_REGS] = {
4, 4, 4, 4,
4, 4, 4, 4,
4, 4, 4, 4,
4, 4, 4, 4,
10, 10, 10, 10,
10, 10, 10, 10,
4, 4, 4, 4,
4, 4, 4, 4,
16, 16, 16, 16,
16, 16, 16, 16,
4
};
/* i386_register_virtual_size[i] is the size in bytes of the virtual
type of register i. */
int i386_register_virtual_size[MAX_NUM_REGS];
/* Convert stabs register number REG to the appropriate register
number used by GDB. */
int
i386_stab_reg_to_regnum (int reg)
{
/* This implements what GCC calls the "default" register map. */
if (reg >= 0 && reg <= 7)
{
/* General registers. */
return reg;
}
else if (reg >= 12 && reg <= 19)
{
/* Floating-point registers. */
return reg - 12 + FP0_REGNUM;
}
else if (reg >= 21 && reg <= 28)
{
/* SSE registers. */
return reg - 21 + XMM0_REGNUM;
}
else if (reg >= 29 && reg <= 36)
{
/* MMX registers. */
/* FIXME: kettenis/2001-07-28: Should we have the MMX registers
as pseudo-registers? */
return reg - 29 + FP0_REGNUM;
}
/* This will hopefully provoke a warning. */
return NUM_REGS + NUM_PSEUDO_REGS;
}
/* Convert Dwarf register number REG to the appropriate register
number used by GDB. */
int
i386_dwarf_reg_to_regnum (int reg)
{
/* The DWARF register numbering includes %eip and %eflags, and
numbers the floating point registers differently. */
if (reg >= 0 && reg <= 9)
{
/* General registers. */
return reg;
}
else if (reg >= 11 && reg <= 18)
{
/* Floating-point registers. */
return reg - 11 + FP0_REGNUM;
}
else if (reg >= 21)
{
/* The SSE and MMX registers have identical numbers as in stabs. */
return i386_stab_reg_to_regnum (reg);
}
/* This will hopefully provoke a warning. */
return NUM_REGS + NUM_PSEUDO_REGS;
}
1999-10-19 04:47:02 +02:00
/* This is the variable that is set with "set disassembly-flavor", and
its legitimate values. */
static const char att_flavor[] = "att";
static const char intel_flavor[] = "intel";
static const char *valid_flavors[] =
1999-07-07 22:19:36 +02:00
{
att_flavor,
intel_flavor,
NULL
};
static const char *disassembly_flavor = att_flavor;
/* This is used to keep the bfd arch_info in sync with the disassembly
flavor. */
2000-05-28 03:12:42 +02:00
static void set_disassembly_flavor_sfunc (char *, int,
struct cmd_list_element *);
static void set_disassembly_flavor (void);
/* Stdio style buffering was used to minimize calls to ptrace, but
this buffering did not take into account that the code section
being accessed may not be an even number of buffers long (even if
the buffer is only sizeof(int) long). In cases where the code
section size happened to be a non-integral number of buffers long,
attempting to read the last buffer would fail. Simply using
target_read_memory and ignoring errors, rather than read_memory, is
not the correct solution, since legitimate access errors would then
be totally ignored. To properly handle this situation and continue
to use buffering would require that this code be able to determine
the minimum code section size granularity (not the alignment of the
section itself, since the actual failing case that pointed out this
problem had a section alignment of 4 but was not a multiple of 4
bytes long), on a target by target basis, and then adjust it's
buffer size accordingly. This is messy, but potentially feasible.
It probably needs the bfd library's help and support. For now, the
buffer size is set to 1. (FIXME -fnf) */
#define CODESTREAM_BUFSIZ 1 /* Was sizeof(int), see note above. */
static CORE_ADDR codestream_next_addr;
static CORE_ADDR codestream_addr;
static unsigned char codestream_buf[CODESTREAM_BUFSIZ];
static int codestream_off;
static int codestream_cnt;
#define codestream_tell() (codestream_addr + codestream_off)
#define codestream_peek() \
(codestream_cnt == 0 ? \
codestream_fill(1) : codestream_buf[codestream_off])
#define codestream_get() \
(codestream_cnt-- == 0 ? \
codestream_fill(0) : codestream_buf[codestream_off++])
1999-07-07 22:19:36 +02:00
static unsigned char
2000-07-30 03:48:28 +02:00
codestream_fill (int peek_flag)
{
codestream_addr = codestream_next_addr;
codestream_next_addr += CODESTREAM_BUFSIZ;
codestream_off = 0;
codestream_cnt = CODESTREAM_BUFSIZ;
read_memory (codestream_addr, (char *) codestream_buf, CODESTREAM_BUFSIZ);
1999-07-07 22:19:36 +02:00
if (peek_flag)
1999-07-07 22:19:36 +02:00
return (codestream_peek ());
else
1999-07-07 22:19:36 +02:00
return (codestream_get ());
}
static void
2000-07-30 03:48:28 +02:00
codestream_seek (CORE_ADDR place)
{
codestream_next_addr = place / CODESTREAM_BUFSIZ;
codestream_next_addr *= CODESTREAM_BUFSIZ;
codestream_cnt = 0;
codestream_fill (1);
1999-07-07 22:19:36 +02:00
while (codestream_tell () != place)
codestream_get ();
}
static void
2000-07-30 03:48:28 +02:00
codestream_read (unsigned char *buf, int count)
{
unsigned char *p;
int i;
p = buf;
for (i = 0; i < count; i++)
*p++ = codestream_get ();
}
/* If the next instruction is a jump, move to its target. */
static void
2000-07-30 03:48:28 +02:00
i386_follow_jump (void)
{
unsigned char buf[4];
long delta;
int data16;
CORE_ADDR pos;
pos = codestream_tell ();
data16 = 0;
if (codestream_peek () == 0x66)
{
codestream_get ();
data16 = 1;
}
switch (codestream_get ())
{
case 0xe9:
/* Relative jump: if data16 == 0, disp32, else disp16. */
if (data16)
{
codestream_read (buf, 2);
delta = extract_signed_integer (buf, 2);
/* Include the size of the jmp instruction (including the
0x66 prefix). */
1999-07-07 22:19:36 +02:00
pos += delta + 4;
}
else
{
codestream_read (buf, 4);
delta = extract_signed_integer (buf, 4);
pos += delta + 5;
}
break;
case 0xeb:
/* Relative jump, disp8 (ignore data16). */
codestream_read (buf, 1);
/* Sign-extend it. */
delta = extract_signed_integer (buf, 1);
pos += delta + 2;
break;
}
codestream_seek (pos);
}
/* Find & return the amount a local space allocated, and advance the
codestream to the first register push (if any).
If the entry sequence doesn't make sense, return -1, and leave
codestream pointer at a random spot. */
static long
2000-07-30 03:48:28 +02:00
i386_get_frame_setup (CORE_ADDR pc)
{
unsigned char op;
codestream_seek (pc);
i386_follow_jump ();
op = codestream_get ();
if (op == 0x58) /* popl %eax */
{
/* This function must start with
popl %eax 0x58
xchgl %eax, (%esp) 0x87 0x04 0x24
or xchgl %eax, 0(%esp) 0x87 0x44 0x24 0x00
(the System V compiler puts out the second `xchg'
instruction, and the assembler doesn't try to optimize it, so
the 'sib' form gets generated). This sequence is used to get
the address of the return buffer for a function that returns
a structure. */
int pos;
unsigned char buf[4];
static unsigned char proto1[3] = { 0x87, 0x04, 0x24 };
static unsigned char proto2[4] = { 0x87, 0x44, 0x24, 0x00 };
pos = codestream_tell ();
codestream_read (buf, 4);
if (memcmp (buf, proto1, 3) == 0)
pos += 3;
else if (memcmp (buf, proto2, 4) == 0)
pos += 4;
codestream_seek (pos);
op = codestream_get (); /* Update next opcode. */
}
if (op == 0x68 || op == 0x6a)
{
/* This function may start with
pushl constant
call _probe
addl $4, %esp
followed by
pushl %ebp
etc. */
int pos;
unsigned char buf[8];
/* Skip past the `pushl' instruction; it has either a one-byte
or a four-byte operand, depending on the opcode. */
pos = codestream_tell ();
if (op == 0x68)
pos += 4;
else
pos += 1;
codestream_seek (pos);
/* Read the following 8 bytes, which should be "call _probe" (6
bytes) followed by "addl $4,%esp" (2 bytes). */
codestream_read (buf, sizeof (buf));
if (buf[0] == 0xe8 && buf[6] == 0xc4 && buf[7] == 0x4)
pos += sizeof (buf);
codestream_seek (pos);
op = codestream_get (); /* Update next opcode. */
}
if (op == 0x55) /* pushl %ebp */
1999-07-07 22:19:36 +02:00
{
/* Check for "movl %esp, %ebp" -- can be written in two ways. */
switch (codestream_get ())
{
case 0x8b:
if (codestream_get () != 0xec)
return -1;
break;
case 0x89:
if (codestream_get () != 0xe5)
return -1;
break;
default:
return -1;
}
/* Check for stack adjustment
subl $XXX, %esp
NOTE: You can't subtract a 16 bit immediate from a 32 bit
reg, so we don't have to worry about a data16 prefix. */
op = codestream_peek ();
if (op == 0x83)
{
/* `subl' with 8 bit immediate. */
codestream_get ();
if (codestream_get () != 0xec)
/* Some instruction starting with 0x83 other than `subl'. */
{
codestream_seek (codestream_tell () - 2);
return 0;
}
/* `subl' with signed byte immediate (though it wouldn't
make sense to be negative). */
1999-07-07 22:19:36 +02:00
return (codestream_get ());
}
else if (op == 0x81)
{
char buf[4];
/* Maybe it is `subl' with a 32 bit immedediate. */
1999-07-07 22:19:36 +02:00
codestream_get ();
if (codestream_get () != 0xec)
/* Some instruction starting with 0x81 other than `subl'. */
{
codestream_seek (codestream_tell () - 2);
return 0;
}
/* It is `subl' with a 32 bit immediate. */
1999-07-07 22:19:36 +02:00
codestream_read ((unsigned char *) buf, 4);
return extract_signed_integer (buf, 4);
}
else
{
return 0;
}
}
else if (op == 0xc8)
{
char buf[2];
/* `enter' with 16 bit unsigned immediate. */
1999-07-07 22:19:36 +02:00
codestream_read ((unsigned char *) buf, 2);
codestream_get (); /* Flush final byte of enter instruction. */
return extract_unsigned_integer (buf, 2);
}
return (-1);
}
/* Return the chain-pointer for FRAME. In the case of the i386, the
frame's nominal address is the address of a 4-byte word containing
the calling frame's address. */
CORE_ADDR
i386_frame_chain (struct frame_info *frame)
{
if (frame->signal_handler_caller)
return frame->frame;
if (! inside_entry_file (frame->pc))
return read_memory_unsigned_integer (frame->frame, 4);
return 0;
}
/* Determine whether the function invocation represented by FRAME does
not have a from on the stack associated with it. If it does not,
return non-zero, otherwise return zero. */
int
i386_frameless_function_invocation (struct frame_info *frame)
{
if (frame->signal_handler_caller)
return 0;
return frameless_look_for_prologue (frame);
}
/* Return the saved program counter for FRAME. */
CORE_ADDR
i386_frame_saved_pc (struct frame_info *frame)
{
/* FIXME: kettenis/2001-05-09: Conditionalizing the next bit of code
on SIGCONTEXT_PC_OFFSET and I386V4_SIGTRAMP_SAVED_PC should be
considered a temporary hack. I plan to come up with something
better when we go multi-arch. */
#if defined (SIGCONTEXT_PC_OFFSET) || defined (I386V4_SIGTRAMP_SAVED_PC)
if (frame->signal_handler_caller)
return sigtramp_saved_pc (frame);
#endif
return read_memory_unsigned_integer (frame->frame + 4, 4);
}
/* Immediately after a function call, return the saved pc. */
CORE_ADDR
i386_saved_pc_after_call (struct frame_info *frame)
{
return read_memory_unsigned_integer (read_register (SP_REGNUM), 4);
}
/* Return number of args passed to a frame.
Can return -1, meaning no way to tell. */
int
2000-07-30 03:48:28 +02:00
i386_frame_num_args (struct frame_info *fi)
{
#if 1
return -1;
#else
/* This loses because not only might the compiler not be popping the
args right after the function call, it might be popping args from
both this call and a previous one, and we would say there are
more args than there really are. */
1999-07-07 22:19:36 +02:00
int retpc;
unsigned char op;
struct frame_info *pfi;
/* On the i386, the instruction following the call could be:
popl %ecx - one arg
addl $imm, %esp - imm/4 args; imm may be 8 or 32 bits
anything else - zero args. */
int frameless;
1999-05-25 20:09:09 +02:00
frameless = FRAMELESS_FUNCTION_INVOCATION (fi);
if (frameless)
/* In the absence of a frame pointer, GDB doesn't get correct
values for nameless arguments. Return -1, so it doesn't print
any nameless arguments. */
return -1;
1999-07-07 22:19:36 +02:00
pfi = get_prev_frame (fi);
if (pfi == 0)
{
/* NOTE: This can happen if we are looking at the frame for
main, because FRAME_CHAIN_VALID won't let us go into start.
If we have debugging symbols, that's not really a big deal;
it just means it will only show as many arguments to main as
are declared. */
return -1;
}
else
{
1999-07-07 22:19:36 +02:00
retpc = pfi->pc;
op = read_memory_integer (retpc, 1);
if (op == 0x59) /* pop %ecx */
1999-07-07 22:19:36 +02:00
return 1;
else if (op == 0x83)
{
1999-07-07 22:19:36 +02:00
op = read_memory_integer (retpc + 1, 1);
if (op == 0xc4)
/* addl $<signed imm 8 bits>, %esp */
return (read_memory_integer (retpc + 2, 1) & 0xff) / 4;
else
return 0;
}
else if (op == 0x81) /* `add' with 32 bit immediate. */
{
1999-07-07 22:19:36 +02:00
op = read_memory_integer (retpc + 1, 1);
if (op == 0xc4)
/* addl $<imm 32>, %esp */
return read_memory_integer (retpc + 2, 4) / 4;
else
return 0;
}
else
{
return 0;
}
}
#endif
}
/* Parse the first few instructions the function to see what registers
were stored.
We handle these cases:
The startup sequence can be at the start of the function, or the
function can start with a branch to startup code at the end.
%ebp can be set up with either the 'enter' instruction, or "pushl
%ebp, movl %esp, %ebp" (`enter' is too slow to be useful, but was
once used in the System V compiler).
Local space is allocated just below the saved %ebp by either the
'enter' instruction, or by "subl $<size>, %esp". 'enter' has a 16
bit unsigned argument for space to allocate, and the 'addl'
instruction could have either a signed byte, or 32 bit immediate.
Next, the registers used by this function are pushed. With the
System V compiler they will always be in the order: %edi, %esi,
%ebx (and sometimes a harmless bug causes it to also save but not
restore %eax); however, the code below is willing to see the pushes
in any order, and will handle up to 8 of them.
If the setup sequence is at the end of the function, then the next
instruction will be a branch back to the start. */
void
2000-07-30 03:48:28 +02:00
i386_frame_init_saved_regs (struct frame_info *fip)
{
long locals = -1;
unsigned char op;
CORE_ADDR dummy_bottom;
CORE_ADDR addr;
CORE_ADDR pc;
int i;
1999-07-07 22:19:36 +02:00
if (fip->saved_regs)
return;
frame_saved_regs_zalloc (fip);
1999-07-07 22:19:36 +02:00
/* If the frame is the end of a dummy, compute where the beginning
would be. */
dummy_bottom = fip->frame - 4 - REGISTER_BYTES - CALL_DUMMY_LENGTH;
1999-07-07 22:19:36 +02:00
/* Check if the PC points in the stack, in a dummy frame. */
1999-07-07 22:19:36 +02:00
if (dummy_bottom <= fip->pc && fip->pc <= fip->frame)
{
/* All registers were saved by push_call_dummy. */
addr = fip->frame;
1999-07-07 22:19:36 +02:00
for (i = 0; i < NUM_REGS; i++)
{
addr -= REGISTER_RAW_SIZE (i);
fip->saved_regs[i] = addr;
}
return;
}
1999-07-07 22:19:36 +02:00
pc = get_pc_function_start (fip->pc);
if (pc != 0)
locals = i386_get_frame_setup (pc);
1999-07-07 22:19:36 +02:00
if (locals >= 0)
{
addr = fip->frame - 4 - locals;
1999-07-07 22:19:36 +02:00
for (i = 0; i < 8; i++)
{
op = codestream_get ();
if (op < 0x50 || op > 0x57)
break;
#ifdef I386_REGNO_TO_SYMMETRY
/* Dynix uses different internal numbering. Ick. */
fip->saved_regs[I386_REGNO_TO_SYMMETRY (op - 0x50)] = addr;
#else
fip->saved_regs[op - 0x50] = addr;
#endif
addr -= 4;
}
}
1999-07-07 22:19:36 +02:00
fip->saved_regs[PC_REGNUM] = fip->frame + 4;
fip->saved_regs[FP_REGNUM] = fip->frame;
}
/* Return PC of first real instruction. */
int
2000-07-30 03:48:28 +02:00
i386_skip_prologue (int pc)
{
unsigned char op;
int i;
1999-07-07 22:19:36 +02:00
static unsigned char pic_pat[6] =
{ 0xe8, 0, 0, 0, 0, /* call 0x0 */
0x5b, /* popl %ebx */
1999-07-07 22:19:36 +02:00
};
CORE_ADDR pos;
1999-07-07 22:19:36 +02:00
if (i386_get_frame_setup (pc) < 0)
return (pc);
1999-07-07 22:19:36 +02:00
/* Found valid frame setup -- codestream now points to start of push
instructions for saving registers. */
1999-07-07 22:19:36 +02:00
/* Skip over register saves. */
for (i = 0; i < 8; i++)
{
op = codestream_peek ();
/* Break if not `pushl' instrunction. */
1999-07-07 22:19:36 +02:00
if (op < 0x50 || op > 0x57)
break;
codestream_get ();
}
/* The native cc on SVR4 in -K PIC mode inserts the following code
to get the address of the global offset table (GOT) into register
%ebx
call 0x0
popl %ebx
movl %ebx,x(%ebp) (optional)
addl y,%ebx
This code is with the rest of the prologue (at the end of the
function), so we have to skip it to get to the first real
instruction at the start of the function. */
1999-07-07 22:19:36 +02:00
pos = codestream_tell ();
for (i = 0; i < 6; i++)
{
op = codestream_get ();
1999-07-07 22:19:36 +02:00
if (pic_pat[i] != op)
break;
}
if (i == 6)
{
unsigned char buf[4];
long delta = 6;
op = codestream_get ();
1999-07-07 22:19:36 +02:00
if (op == 0x89) /* movl %ebx, x(%ebp) */
{
op = codestream_get ();
if (op == 0x5d) /* One byte offset from %ebp. */
{
delta += 3;
codestream_read (buf, 1);
}
else if (op == 0x9d) /* Four byte offset from %ebp. */
{
delta += 6;
codestream_read (buf, 4);
}
else /* Unexpected instruction. */
1999-07-07 22:19:36 +02:00
delta = -1;
op = codestream_get ();
}
1999-07-07 22:19:36 +02:00
/* addl y,%ebx */
if (delta > 0 && op == 0x81 && codestream_get () == 0xc3)
{
1999-07-07 22:19:36 +02:00
pos += delta + 6;
}
}
codestream_seek (pos);
1999-07-07 22:19:36 +02:00
i386_follow_jump ();
1999-07-07 22:19:36 +02:00
return (codestream_tell ());
}
void
2000-07-30 03:48:28 +02:00
i386_push_dummy_frame (void)
{
CORE_ADDR sp = read_register (SP_REGNUM);
int regnum;
char regbuf[MAX_REGISTER_RAW_SIZE];
1999-07-07 22:19:36 +02:00
sp = push_word (sp, read_register (PC_REGNUM));
sp = push_word (sp, read_register (FP_REGNUM));
write_register (FP_REGNUM, sp);
for (regnum = 0; regnum < NUM_REGS; regnum++)
{
read_register_gen (regnum, regbuf);
sp = push_bytes (sp, regbuf, REGISTER_RAW_SIZE (regnum));
}
write_register (SP_REGNUM, sp);
}
/* Insert the (relative) function address into the call sequence
stored at DYMMY. */
void
i386_fix_call_dummy (char *dummy, CORE_ADDR pc, CORE_ADDR fun, int nargs,
2001-07-15 22:10:02 +02:00
struct value **args, struct type *type, int gcc_p)
{
int from, to, delta, loc;
loc = (int)(read_register (SP_REGNUM) - CALL_DUMMY_LENGTH);
from = loc + 5;
to = (int)(fun);
delta = to - from;
*((char *)(dummy) + 1) = (delta & 0xff);
*((char *)(dummy) + 2) = ((delta >> 8) & 0xff);
*((char *)(dummy) + 3) = ((delta >> 16) & 0xff);
*((char *)(dummy) + 4) = ((delta >> 24) & 0xff);
}
void
2000-07-30 03:48:28 +02:00
i386_pop_frame (void)
{
struct frame_info *frame = get_current_frame ();
CORE_ADDR fp;
int regnum;
char regbuf[MAX_REGISTER_RAW_SIZE];
1999-07-07 22:19:36 +02:00
fp = FRAME_FP (frame);
i386_frame_init_saved_regs (frame);
1999-07-07 22:19:36 +02:00
for (regnum = 0; regnum < NUM_REGS; regnum++)
{
CORE_ADDR addr;
addr = frame->saved_regs[regnum];
if (addr)
{
read_memory (addr, regbuf, REGISTER_RAW_SIZE (regnum));
write_register_bytes (REGISTER_BYTE (regnum), regbuf,
REGISTER_RAW_SIZE (regnum));
}
}
write_register (FP_REGNUM, read_memory_integer (fp, 4));
write_register (PC_REGNUM, read_memory_integer (fp + 4, 4));
write_register (SP_REGNUM, fp + 8);
flush_cached_frames ();
}
#ifdef GET_LONGJMP_TARGET
/* Figure out where the longjmp will land. Slurp the args out of the
stack. We expect the first arg to be a pointer to the jmp_buf
structure from which we extract the pc (JB_PC) that we will land
at. The pc is copied into PC. This routine returns true on
success. */
int
2000-07-30 03:48:28 +02:00
get_longjmp_target (CORE_ADDR *pc)
{
char buf[TARGET_PTR_BIT / TARGET_CHAR_BIT];
CORE_ADDR sp, jb_addr;
sp = read_register (SP_REGNUM);
if (target_read_memory (sp + SP_ARG0, /* Offset of first arg on stack. */
buf,
TARGET_PTR_BIT / TARGET_CHAR_BIT))
return 0;
jb_addr = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
if (target_read_memory (jb_addr + JB_PC * JB_ELEMENT_SIZE, buf,
TARGET_PTR_BIT / TARGET_CHAR_BIT))
return 0;
*pc = extract_address (buf, TARGET_PTR_BIT / TARGET_CHAR_BIT);
return 1;
}
#endif /* GET_LONGJMP_TARGET */
CORE_ADDR
2001-07-15 22:10:02 +02:00
i386_push_arguments (int nargs, struct value **args, CORE_ADDR sp,
int struct_return, CORE_ADDR struct_addr)
{
sp = default_push_arguments (nargs, args, sp, struct_return, struct_addr);
if (struct_return)
{
char buf[4];
sp -= 4;
store_address (buf, 4, struct_addr);
write_memory (sp, buf, 4);
}
return sp;
}
void
i386_store_struct_return (CORE_ADDR addr, CORE_ADDR sp)
{
/* Do nothing. Everything was already done by i386_push_arguments. */
}
/* These registers are used for returning integers (and on some
targets also for returning `struct' and `union' values when their
size and alignment match an integer type). */
#define LOW_RETURN_REGNUM 0 /* %eax */
#define HIGH_RETURN_REGNUM 2 /* %edx */
/* Extract from an array REGBUF containing the (raw) register state, a
function return value of TYPE, and copy that, in virtual format,
into VALBUF. */
void
i386_extract_return_value (struct type *type, char *regbuf, char *valbuf)
{
int len = TYPE_LENGTH (type);
if (TYPE_CODE (type) == TYPE_CODE_STRUCT
&& TYPE_NFIELDS (type) == 1)
{
i386_extract_return_value (TYPE_FIELD_TYPE (type, 0), regbuf, valbuf);
return;
}
if (TYPE_CODE (type) == TYPE_CODE_FLT)
{
if (NUM_FREGS == 0)
{
warning ("Cannot find floating-point return value.");
memset (valbuf, 0, len);
return;
}
/* Floating-point return values can be found in %st(0). */
if (len == TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT
&& TARGET_LONG_DOUBLE_FORMAT == &floatformat_i387_ext)
{
/* Copy straight over, but take care of the padding. */
memcpy (valbuf, &regbuf[REGISTER_BYTE (FP0_REGNUM)],
FPU_REG_RAW_SIZE);
memset (valbuf + FPU_REG_RAW_SIZE, 0, len - FPU_REG_RAW_SIZE);
}
else
{
/* Convert the extended floating-point number found in
%st(0) to the desired type. This is probably not exactly
how it would happen on the target itself, but it is the
best we can do. */
DOUBLEST val;
floatformat_to_doublest (&floatformat_i387_ext,
&regbuf[REGISTER_BYTE (FP0_REGNUM)], &val);
store_floating (valbuf, TYPE_LENGTH (type), val);
}
}
else
1999-07-07 22:19:36 +02:00
{
1999-09-09 02:02:17 +02:00
int low_size = REGISTER_RAW_SIZE (LOW_RETURN_REGNUM);
int high_size = REGISTER_RAW_SIZE (HIGH_RETURN_REGNUM);
if (len <= low_size)
memcpy (valbuf, &regbuf[REGISTER_BYTE (LOW_RETURN_REGNUM)], len);
1999-09-09 02:02:17 +02:00
else if (len <= (low_size + high_size))
{
memcpy (valbuf,
&regbuf[REGISTER_BYTE (LOW_RETURN_REGNUM)], low_size);
1999-09-09 02:02:17 +02:00
memcpy (valbuf + low_size,
&regbuf[REGISTER_BYTE (HIGH_RETURN_REGNUM)], len - low_size);
1999-09-09 02:02:17 +02:00
}
else
internal_error (__FILE__, __LINE__,
"Cannot extract return value of %d bytes long.", len);
}
}
/* Write into the appropriate registers a function return value stored
in VALBUF of type TYPE, given in virtual format. */
void
i386_store_return_value (struct type *type, char *valbuf)
{
int len = TYPE_LENGTH (type);
if (TYPE_CODE (type) == TYPE_CODE_STRUCT
&& TYPE_NFIELDS (type) == 1)
{
i386_store_return_value (TYPE_FIELD_TYPE (type, 0), valbuf);
return;
}
if (TYPE_CODE (type) == TYPE_CODE_FLT)
{
unsigned int fstat;
if (NUM_FREGS == 0)
{
warning ("Cannot set floating-point return value.");
return;
}
/* Returning floating-point values is a bit tricky. Apart from
storing the return value in %st(0), we have to simulate the
state of the FPU at function return point. */
if (len == TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT
&& TARGET_LONG_DOUBLE_FORMAT == &floatformat_i387_ext)
{
/* Copy straight over. */
write_register_bytes (REGISTER_BYTE (FP0_REGNUM), valbuf,
FPU_REG_RAW_SIZE);
}
else
{
char buf[FPU_REG_RAW_SIZE];
DOUBLEST val;
/* Convert the value found in VALBUF to the extended
floating-point format used by the FPU. This is probably
not exactly how it would happen on the target itself, but
it is the best we can do. */
val = extract_floating (valbuf, TYPE_LENGTH (type));
floatformat_from_doublest (&floatformat_i387_ext, &val, buf);
write_register_bytes (REGISTER_BYTE (FP0_REGNUM), buf,
FPU_REG_RAW_SIZE);
}
/* Set the top of the floating-point register stack to 7. The
actual value doesn't really matter, but 7 is what a normal
function return would end up with if the program started out
with a freshly initialized FPU. */
fstat = read_register (FSTAT_REGNUM);
fstat |= (7 << 11);
write_register (FSTAT_REGNUM, fstat);
/* Mark %st(1) through %st(7) as empty. Since we set the top of
the floating-point register stack to 7, the appropriate value
for the tag word is 0x3fff. */
write_register (FTAG_REGNUM, 0x3fff);
}
else
{
int low_size = REGISTER_RAW_SIZE (LOW_RETURN_REGNUM);
int high_size = REGISTER_RAW_SIZE (HIGH_RETURN_REGNUM);
if (len <= low_size)
write_register_bytes (REGISTER_BYTE (LOW_RETURN_REGNUM), valbuf, len);
else if (len <= (low_size + high_size))
{
write_register_bytes (REGISTER_BYTE (LOW_RETURN_REGNUM),
valbuf, low_size);
write_register_bytes (REGISTER_BYTE (HIGH_RETURN_REGNUM),
valbuf + low_size, len - low_size);
}
else
internal_error (__FILE__, __LINE__,
"Cannot store return value of %d bytes long.", len);
}
}
/* Extract from an array REGBUF containing the (raw) register state
the address in which a function should return its structure value,
as a CORE_ADDR. */
CORE_ADDR
i386_extract_struct_value_address (char *regbuf)
{
return extract_address (&regbuf[REGISTER_BYTE (LOW_RETURN_REGNUM)],
REGISTER_RAW_SIZE (LOW_RETURN_REGNUM));
}
/* Return the GDB type object for the "standard" data type of data in
register REGNUM. Perhaps %esi and %edi should go here, but
potentially they could be used for things other than address. */
struct type *
i386_register_virtual_type (int regnum)
{
if (regnum == PC_REGNUM || regnum == FP_REGNUM || regnum == SP_REGNUM)
return lookup_pointer_type (builtin_type_void);
if (IS_FP_REGNUM (regnum))
return builtin_type_long_double;
if (IS_SSE_REGNUM (regnum))
return builtin_type_v4sf;
return builtin_type_int;
}
/* Return true iff register REGNUM's virtual format is different from
its raw format. Note that this definition assumes that the host
supports IEEE 32-bit floats, since it doesn't say that SSE
registers need conversion. Even if we can't find a counterexample,
this is still sloppy. */
int
i386_register_convertible (int regnum)
{
return IS_FP_REGNUM (regnum);
}
/* Convert data from raw format for register REGNUM in buffer FROM to
virtual format with type TYPE in buffer TO. */
void
i386_register_convert_to_virtual (int regnum, struct type *type,
char *from, char *to)
{
char buf[12];
DOUBLEST d;
/* We only support floating-point values. */
if (TYPE_CODE (type) != TYPE_CODE_FLT)
{
warning ("Cannot convert floating-point register value "
"to non-floating-point type.");
memset (to, 0, TYPE_LENGTH (type));
return;
}
/* First add the necessary padding. */
memcpy (buf, from, FPU_REG_RAW_SIZE);
memset (buf + FPU_REG_RAW_SIZE, 0, sizeof buf - FPU_REG_RAW_SIZE);
/* Convert to TYPE. This should be a no-op, if TYPE is equivalent
to the extended floating-point format used by the FPU. */
d = extract_floating (buf, sizeof buf);
store_floating (to, TYPE_LENGTH (type), d);
}
/* Convert data from virtual format with type TYPE in buffer FROM to
raw format for register REGNUM in buffer TO. */
void
i386_register_convert_to_raw (struct type *type, int regnum,
char *from, char *to)
{
gdb_assert (TYPE_CODE (type) == TYPE_CODE_FLT
&& TYPE_LENGTH (type) == 12);
/* Simply omit the two unused bytes. */
memcpy (to, from, FPU_REG_RAW_SIZE);
}
#ifdef I386V4_SIGTRAMP_SAVED_PC
/* Get saved user PC for sigtramp from the pushed ucontext on the
stack for all three variants of SVR4 sigtramps. */
CORE_ADDR
2000-07-30 03:48:28 +02:00
i386v4_sigtramp_saved_pc (struct frame_info *frame)
{
CORE_ADDR saved_pc_offset = 4;
char *name = NULL;
find_pc_partial_function (frame->pc, &name, NULL, NULL);
if (name)
{
if (STREQ (name, "_sigreturn"))
saved_pc_offset = 132 + 14 * 4;
else if (STREQ (name, "_sigacthandler"))
saved_pc_offset = 80 + 14 * 4;
else if (STREQ (name, "sigvechandler"))
saved_pc_offset = 120 + 14 * 4;
}
if (frame->next)
return read_memory_integer (frame->next->frame + saved_pc_offset, 4);
return read_memory_integer (read_register (SP_REGNUM) + saved_pc_offset, 4);
}
#endif /* I386V4_SIGTRAMP_SAVED_PC */
1999-08-03 01:48:37 +02:00
#ifdef STATIC_TRANSFORM_NAME
/* SunPRO encodes the static variables. This is not related to C++
mangling, it is done for C too. */
char *
2000-07-30 03:48:28 +02:00
sunpro_static_transform_name (char *name)
{
char *p;
if (IS_STATIC_TRANSFORM_NAME (name))
{
/* For file-local statics there will be a period, a bunch of
junk (the contents of which match a string given in the
1999-07-07 22:19:36 +02:00
N_OPT), a period and the name. For function-local statics
there will be a bunch of junk (which seems to change the
second character from 'A' to 'B'), a period, the name of the
function, and the name. So just skip everything before the
last period. */
p = strrchr (name, '.');
if (p != NULL)
name = p + 1;
}
return name;
}
#endif /* STATIC_TRANSFORM_NAME */
/* Stuff for WIN32 PE style DLL's but is pretty generic really. */
CORE_ADDR
2000-07-30 03:48:28 +02:00
skip_trampoline_code (CORE_ADDR pc, char *name)
{
if (pc && read_memory_unsigned_integer (pc, 2) == 0x25ff) /* jmp *(dest) */
{
1999-07-07 22:19:36 +02:00
unsigned long indirect = read_memory_unsigned_integer (pc + 2, 4);
struct minimal_symbol *indsym =
indirect ? lookup_minimal_symbol_by_pc (indirect) : 0;
1999-07-07 22:19:36 +02:00
char *symname = indsym ? SYMBOL_NAME (indsym) : 0;
1999-07-07 22:19:36 +02:00
if (symname)
{
1999-07-07 22:19:36 +02:00
if (strncmp (symname, "__imp_", 6) == 0
|| strncmp (symname, "_imp_", 5) == 0)
return name ? 1 : read_memory_unsigned_integer (indirect, 4);
}
}
return 0; /* Not a trampoline. */
}
/* We have two flavours of disassembly. The machinery on this page
deals with switching between those. */
static int
2000-07-30 03:48:28 +02:00
gdb_print_insn_i386 (bfd_vma memaddr, disassemble_info *info)
{
if (disassembly_flavor == att_flavor)
return print_insn_i386_att (memaddr, info);
else if (disassembly_flavor == intel_flavor)
return print_insn_i386_intel (memaddr, info);
/* Never reached -- disassembly_flavour is always either att_flavor
or intel_flavor. */
internal_error (__FILE__, __LINE__, "failed internal consistency check");
1999-04-26 20:34:20 +02:00
}
/* If the disassembly mode is intel, we have to also switch the bfd
mach_type. This function is run in the set disassembly_flavor
1999-04-26 20:34:20 +02:00
command, and does that. */
static void
2000-07-30 03:48:28 +02:00
set_disassembly_flavor_sfunc (char *args, int from_tty,
struct cmd_list_element *c)
1999-04-26 20:34:20 +02:00
{
set_disassembly_flavor ();
}
static void
2000-07-30 03:48:28 +02:00
set_disassembly_flavor (void)
1999-04-26 20:34:20 +02:00
{
if (disassembly_flavor == att_flavor)
set_architecture_from_arch_mach (bfd_arch_i386, bfd_mach_i386_i386);
else if (disassembly_flavor == intel_flavor)
set_architecture_from_arch_mach (bfd_arch_i386,
bfd_mach_i386_i386_intel_syntax);
}
1999-10-06 01:13:56 +02:00
/* Provide a prototype to silence -Wmissing-prototypes. */
void _initialize_i386_tdep (void);
void
2000-07-30 03:48:28 +02:00
_initialize_i386_tdep (void)
{
1999-10-19 04:47:02 +02:00
/* Initialize the table saying where each register starts in the
register file. */
{
int i, offset;
offset = 0;
for (i = 0; i < MAX_NUM_REGS; i++)
{
i386_register_byte[i] = offset;
offset += i386_register_raw_size[i];
}
}
/* Initialize the table of virtual register sizes. */
{
int i;
for (i = 0; i < MAX_NUM_REGS; i++)
i386_register_virtual_size[i] = TYPE_LENGTH (REGISTER_VIRTUAL_TYPE (i));
}
1999-07-07 22:19:36 +02:00
tm_print_insn = gdb_print_insn_i386;
tm_print_insn_info.mach = bfd_lookup_arch (bfd_arch_i386, 0)->mach;
/* Add the variable that controls the disassembly flavor. */
1999-10-19 04:47:02 +02:00
{
struct cmd_list_element *new_cmd;
1999-04-26 20:34:20 +02:00
1999-10-19 04:47:02 +02:00
new_cmd = add_set_enum_cmd ("disassembly-flavor", no_class,
valid_flavors,
&disassembly_flavor,
"\
Set the disassembly flavor, the valid values are \"att\" and \"intel\", \
and the default value is \"att\".",
1999-10-19 04:47:02 +02:00
&setlist);
new_cmd->function.sfunc = set_disassembly_flavor_sfunc;
add_show_from_set (new_cmd, &showlist);
}
1999-07-07 22:19:36 +02:00
1999-04-26 20:34:20 +02:00
/* Finally, initialize the disassembly flavor to the default given
in the disassembly_flavor variable. */
1999-04-26 20:34:20 +02:00
set_disassembly_flavor ();
}