binutils-gdb/gprof/hist.c

756 lines
21 KiB
C
Raw Normal View History

/* hist.c - Histogram related operations.
Copyright 1999, 2000, 2001, 2002, 2004, 2005, 2007, 2009
2005-03-03 13:05:13 +01:00
Free Software Foundation, Inc.
This file is part of GNU Binutils.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
2007-07-06 12:40:34 +02:00
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
2005-05-09 08:55:25 +02:00
Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
02110-1301, USA. */
1999-05-03 09:29:11 +02:00
#include "gprof.h"
#include "libiberty.h"
* alpha.c (alpha_Instruction): Don't use. (alpha_find_call): Avoid use of bitfields and casts between pointers and integers of different sizes. Avoid endian problems when cross-compiling. * vax.c (vax_find_call): Likewise. (struct modebyte): Don't use. (vax_operandmode): Pass in an unsigned char *. (vax_operandlength): Likewise. (vax_reladdr): Rename to vax_offset and return relative offset rather than address. * i386.c (i386_find_call): Avoid casts between pointers and integers of different sizes. * sparc.c (sparc_find_call): Likewise. Avoid endian problems. * tahoe.c (tahoe_find_call): Likewise. (tahoe_reladdr): Rename to tahoe_offset and return relative offset rather than address. * basic_blocks.h: Don't include headers here. * call_graph.h: Likewise. * cg_arcs.h: Likewise. * cg_print.h: Likewise. * corefile.h: Likewise. * gmon_io.h: Likewise. * gmon_out.h: Likewise. * hertz.h: Likewise. * hist.h: Likewise. * source.h: Likewise. * sym_ids.h: Likewise. * symtab.h: Likewise. * gprof.h: Don't include ansidecl.h, do include bfd.h. (bool): Don't typedef. * alpha.c: Adjust #include's for above header changes. * basic_blocks.c: Likewise. * call_graph.c: Likewise. * cg_arcs.c: Likewise. * cg_dfn.c: Likewise. * cg_print.c: Likewise. * corefile.c: Likewise. * gmon_io.c: Likewise. * gprof.c: Likewise. * hertz.c: Likewise. * hist.c: Likewise. * i386.c: Likewise. * mips.c: Likewise. * sparc.c: Likewise. * sym_ids.c: Likewise. * symtab.c: Likewise. * tahoe.c: Likewise. * utils.c: Likewise. * vax.c: Likewise. * po/POTFILES.in: Regenerate.
2002-01-31 13:56:08 +01:00
#include "search_list.h"
#include "source.h"
#include "symtab.h"
1999-05-03 09:29:11 +02:00
#include "corefile.h"
#include "gmon_io.h"
#include "gmon_out.h"
#include "hist.h"
#include "sym_ids.h"
#include "utils.h"
#include "math.h"
#include "stdio.h"
#include "stdlib.h"
1999-05-03 09:29:11 +02:00
#define UNITS_TO_CODE (offset_to_code / sizeof(UNIT))
static void scale_and_align_entries (void);
static void print_header (int);
static void print_line (Sym *, double);
static int cmp_time (const PTR, const PTR);
1999-05-03 09:29:11 +02:00
/* Declarations of automatically generated functions to output blurbs. */
extern void flat_blurb (FILE * fp);
1999-05-03 09:29:11 +02:00
static histogram *find_histogram (bfd_vma lowpc, bfd_vma highpc);
static histogram *find_histogram_for_pc (bfd_vma pc);
histogram * histograms;
unsigned num_histograms;
1999-05-03 09:29:11 +02:00
double hist_scale;
static char hist_dimension[16] = "seconds";
static char hist_dimension_abbrev = 's';
1999-05-03 09:29:11 +02:00
static double accum_time; /* Accumulated time so far for print_line(). */
static double total_time; /* Total time for all routines. */
/* Table of SI prefixes for powers of 10 (used to automatically
scale some of the values in the flat profile). */
1999-05-03 09:29:11 +02:00
const struct
{
char prefix;
double scale;
}
SItab[] =
{
{ 'T', 1e-12 }, /* tera */
{ 'G', 1e-09 }, /* giga */
{ 'M', 1e-06 }, /* mega */
{ 'K', 1e-03 }, /* kilo */
{ ' ', 1e-00 },
{ 'm', 1e+03 }, /* milli */
{ 'u', 1e+06 }, /* micro */
{ 'n', 1e+09 }, /* nano */
{ 'p', 1e+12 }, /* pico */
{ 'f', 1e+15 }, /* femto */
{ 'a', 1e+18 } /* ato */
1999-05-03 09:29:11 +02:00
};
/* Reads just the header part of histogram record into
*RECORD from IFP. FILENAME is the name of IFP and
is provided for formatting error messages only.
If FIRST is non-zero, sets global variables HZ, HIST_DIMENSION,
HIST_DIMENSION_ABBREV, HIST_SCALE. If FIRST is zero, checks
that the new histogram is compatible with already-set values
of those variables and emits an error if that's not so. */
static void
read_histogram_header (histogram *record,
FILE *ifp, const char *filename,
int first)
1999-05-03 09:29:11 +02:00
{
unsigned int profrate;
char n_hist_dimension[15];
char n_hist_dimension_abbrev;
double n_hist_scale;
if (gmon_io_read_vma (ifp, &record->lowpc)
|| gmon_io_read_vma (ifp, &record->highpc)
|| gmon_io_read_32 (ifp, &record->num_bins)
|| gmon_io_read_32 (ifp, &profrate)
|| gmon_io_read (ifp, n_hist_dimension, 15)
|| gmon_io_read (ifp, &n_hist_dimension_abbrev, 1))
1999-05-03 09:29:11 +02:00
{
fprintf (stderr, _("%s: %s: unexpected end of file\n"),
whoami, filename);
1999-05-03 09:29:11 +02:00
done (1);
}
n_hist_scale = (double)((record->highpc - record->lowpc) / sizeof (UNIT))
/ record->num_bins;
if (first)
1999-05-03 09:29:11 +02:00
{
/* We don't try to veryfy profrate is the same for all histogram
records. If we have two histogram records for the same
address range and profiling samples is done as often
as possible as opposed on timer, then the actual profrate will
be slightly different. Most of the time the difference does not
matter and insisting that profiling rate is exactly the same
will only create inconvenient. */
1999-05-03 09:29:11 +02:00
hz = profrate;
memcpy (hist_dimension, n_hist_dimension, 15);
hist_dimension_abbrev = n_hist_dimension_abbrev;
hist_scale = n_hist_scale;
1999-05-03 09:29:11 +02:00
}
else
1999-05-03 09:29:11 +02:00
{
if (strncmp (n_hist_dimension, hist_dimension, 15) != 0)
{
fprintf (stderr,
_("%s: dimension unit changed between histogram records\n"
"%s: from '%s'\n"
"%s: to '%s'\n"),
whoami, whoami, hist_dimension, whoami, n_hist_dimension);
done (1);
}
if (n_hist_dimension_abbrev != hist_dimension_abbrev)
{
fprintf (stderr,
_("%s: dimension abbreviation changed between histogram records\n"
"%s: from '%c'\n"
"%s: to '%c'\n"),
whoami, whoami, hist_dimension_abbrev, whoami, n_hist_dimension_abbrev);
done (1);
}
/* The only reason we require the same scale for histograms is that
there's code (notably printing code), that prints units,
and it would be very confusing to have one unit mean different
things for different functions. */
if (fabs (hist_scale - n_hist_scale) > 0.000001)
{
fprintf (stderr,
_("%s: different scales in histogram records"),
whoami);
done (1);
}
1999-05-03 09:29:11 +02:00
}
}
1999-05-03 09:29:11 +02:00
/* Read the histogram from file IFP. FILENAME is the name of IFP and
is provided for formatting error messages only. */
void
hist_read_rec (FILE * ifp, const char *filename)
{
bfd_vma lowpc, highpc;
histogram n_record;
histogram *record, *existing_record;
unsigned i;
/* 1. Read the header and see if there's existing record for the
same address range and that there are no overlapping records. */
read_histogram_header (&n_record, ifp, filename, num_histograms == 0);
existing_record = find_histogram (n_record.lowpc, n_record.highpc);
if (existing_record)
1999-05-03 09:29:11 +02:00
{
record = existing_record;
}
else
{
/* If this record overlaps, but does not completely match an existing
record, it's an error. */
lowpc = n_record.lowpc;
highpc = n_record.highpc;
hist_clip_symbol_address (&lowpc, &highpc);
if (lowpc != highpc)
{
fprintf (stderr,
_("%s: overlapping histogram records\n"),
whoami);
done (1);
}
/* This is new record. Add it to global array and allocate space for
the samples. */
* po/bfd.pot: Updated by the Translation project. * po/binutils.pot: Updated by the Translation project. * po/gold.pot: Updated by the Translation project. * po/gold.pot: Updated by the Translation project. * po/gprof.pot: Updated by the Translation project. * po/sv.po: Updated Swedish translation. * po/ld.pot: Updated by the Translation project. * po/fi.po: Updated Finnish translation. * po/ld.pot: Updated by the Translation project. * po/fi.po: Updated Finnish translation. Updated sources to compile cleanly with -Wc++-compat: * basic_blocks.c: Add casts. * cg_dfn.c: Add cast. * corefile.c: Add casts. * gmon_io.c: Add casts. * hist.c: Add cast. * source.c: Add cast. * sym_ids.c (struct match): Moved to top level. Updated soruces in ld/* to compile cleanly with -Wc++-compat: * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level. * ldcref.c: Add casts. * ldctor.c: Add casts. * ldexp.c * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level. * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer. * ldlang.h (enum statement_enum): Move to top level. * ldmain.c: Add casts. * ldwrite.c: Add casts. * lexsup.c: Add casts. (enum control_enum): Move to top level. * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer. Updated sources to compile cleanly with -Wc++-compat: * basic_blocks.c: Add casts. * cg_dfn.c: Add cast. * corefile.c: Add casts. * gmon_io.c: Add casts. * hist.c: Add cast. * source.c: Add cast. * sym_ids.c (struct match): Moved to top level. * as.c (main): Call dwarf2_init. * config/obj-elf.c (struct group_list): New field. (build_group_lists): Use hash lookup. (free_section_idx): New function. (elf_frob_file): Adjust. * dwarf2dbg.c (all_segs_hash, last_seg_ptr): New variables. (get_line_subseg): Adjust. (dwarf2_init): New function. * dwarf2dbg.h (dwarf2_init): New declaration.
2009-09-11 17:27:38 +02:00
histograms = (struct histogram *)
xrealloc (histograms, sizeof (histogram) * (num_histograms + 1));
memcpy (histograms + num_histograms,
&n_record, sizeof (histogram));
record = &histograms[num_histograms];
++num_histograms;
record->sample = (int *) xmalloc (record->num_bins
* sizeof (record->sample[0]));
memset (record->sample, 0, record->num_bins * sizeof (record->sample[0]));
1999-05-03 09:29:11 +02:00
}
/* 2. We have either a new record (with zeroed histogram data), or an existing
record with some data in the histogram already. Read new data into the
record, adding hit counts. */
DBG (SAMPLEDEBUG,
printf ("[hist_read_rec] n_lowpc 0x%lx n_highpc 0x%lx ncnt %u\n",
(unsigned long) record->lowpc, (unsigned long) record->highpc,
record->num_bins));
for (i = 0; i < record->num_bins; ++i)
1999-05-03 09:29:11 +02:00
{
UNIT count;
1999-05-03 09:29:11 +02:00
if (fread (&count[0], sizeof (count), 1, ifp) != 1)
{
fprintf (stderr,
_("%s: %s: unexpected EOF after reading %u of %u samples\n"),
whoami, filename, i, record->num_bins);
1999-05-03 09:29:11 +02:00
done (1);
}
record->sample[i] += bfd_get_16 (core_bfd, (bfd_byte *) & count[0]);
DBG (SAMPLEDEBUG,
printf ("[hist_read_rec] 0x%lx: %u\n",
(unsigned long) (record->lowpc
+ i * (record->highpc - record->lowpc)
/ record->num_bins),
record->sample[i]));
1999-05-03 09:29:11 +02:00
}
}
/* Write all execution histograms file OFP. FILENAME is the name
of OFP and is provided for formatting error-messages only. */
1999-05-03 09:29:11 +02:00
void
hist_write_hist (FILE * ofp, const char *filename)
1999-05-03 09:29:11 +02:00
{
UNIT count;
unsigned int i, r;
1999-05-03 09:29:11 +02:00
for (r = 0; r < num_histograms; ++r)
1999-05-03 09:29:11 +02:00
{
histogram *record = &histograms[r];
/* Write header. */
if (gmon_io_write_8 (ofp, GMON_TAG_TIME_HIST)
|| gmon_io_write_vma (ofp, record->lowpc)
|| gmon_io_write_vma (ofp, record->highpc)
|| gmon_io_write_32 (ofp, record->num_bins)
|| gmon_io_write_32 (ofp, hz)
|| gmon_io_write (ofp, hist_dimension, 15)
|| gmon_io_write (ofp, &hist_dimension_abbrev, 1))
1999-05-03 09:29:11 +02:00
{
perror (filename);
done (1);
}
for (i = 0; i < record->num_bins; ++i)
{
bfd_put_16 (core_bfd, (bfd_vma) record->sample[i], (bfd_byte *) &count[0]);
if (fwrite (&count[0], sizeof (count), 1, ofp) != 1)
{
perror (filename);
done (1);
}
}
1999-05-03 09:29:11 +02:00
}
}
/* Calculate scaled entry point addresses (to save time in
hist_assign_samples), and, on architectures that have procedure
entry masks at the start of a function, possibly push the scaled
entry points over the procedure entry mask, if it turns out that
the entry point is in one bin and the code for a routine is in the
next bin. */
1999-05-03 09:29:11 +02:00
static void
scale_and_align_entries ()
{
Sym *sym;
bfd_vma bin_of_entry;
bfd_vma bin_of_code;
for (sym = symtab.base; sym < symtab.limit; sym++)
{
histogram *r = find_histogram_for_pc (sym->addr);
sym->hist.scaled_addr = sym->addr / sizeof (UNIT);
if (r)
1999-05-03 09:29:11 +02:00
{
bin_of_entry = (sym->hist.scaled_addr - r->lowpc) / hist_scale;
bin_of_code = ((sym->hist.scaled_addr + UNITS_TO_CODE - r->lowpc)
/ hist_scale);
if (bin_of_entry < bin_of_code)
{
DBG (SAMPLEDEBUG,
printf ("[scale_and_align_entries] pushing 0x%lx to 0x%lx\n",
(unsigned long) sym->hist.scaled_addr,
(unsigned long) (sym->hist.scaled_addr
+ UNITS_TO_CODE)));
sym->hist.scaled_addr += UNITS_TO_CODE;
}
1999-05-03 09:29:11 +02:00
}
}
}
/* Assign samples to the symbol to which they belong.
Histogram bin I covers some address range [BIN_LOWPC,BIN_HIGH_PC)
which may overlap one more symbol address ranges. If a symbol
overlaps with the bin's address range by O percent, then O percent
of the bin's count is credited to that symbol.
There are three cases as to where BIN_LOW_PC and BIN_HIGH_PC can be
with respect to the symbol's address range [SYM_LOW_PC,
SYM_HIGH_PC) as shown in the following diagram. OVERLAP computes
the distance (in UNITs) between the arrows, the fraction of the
sample that is to be credited to the symbol which starts at
SYM_LOW_PC.
sym_low_pc sym_high_pc
| |
v v
+-----------------------------------------------+
| |
| ->| |<- ->| |<- ->| |<- |
| | | | | |
+---------+ +---------+ +---------+
^ ^ ^ ^ ^ ^
| | | | | |
bin_low_pc bin_high_pc bin_low_pc bin_high_pc bin_low_pc bin_high_pc
For the VAX we assert that samples will never fall in the first two
bytes of any routine, since that is the entry mask, thus we call
scale_and_align_entries() to adjust the entry points if the entry
mask falls in one bin but the code for the routine doesn't start
until the next bin. In conjunction with the alignment of routine
addresses, this should allow us to have only one sample for every
four bytes of text space and never have any overlap (the two end
cases, above). */
static void
hist_assign_samples_1 (histogram *r)
1999-05-03 09:29:11 +02:00
{
bfd_vma bin_low_pc, bin_high_pc;
bfd_vma sym_low_pc, sym_high_pc;
bfd_vma overlap, addr;
unsigned int bin_count;
unsigned int i, j, k;
double count_time, credit;
1999-05-03 09:29:11 +02:00
bfd_vma lowpc = r->lowpc / sizeof (UNIT);
1999-05-03 09:29:11 +02:00
/* Iterate over all sample bins. */
for (i = 0, k = 1; i < r->num_bins; ++i)
1999-05-03 09:29:11 +02:00
{
bin_count = r->sample[i];
if (! bin_count)
continue;
1999-05-03 09:29:11 +02:00
bin_low_pc = lowpc + (bfd_vma) (hist_scale * i);
bin_high_pc = lowpc + (bfd_vma) (hist_scale * (i + 1));
count_time = bin_count;
1999-05-03 09:29:11 +02:00
DBG (SAMPLEDEBUG,
printf (
"[assign_samples] bin_low_pc=0x%lx, bin_high_pc=0x%lx, bin_count=%u\n",
(unsigned long) (sizeof (UNIT) * bin_low_pc),
(unsigned long) (sizeof (UNIT) * bin_high_pc),
1999-05-03 09:29:11 +02:00
bin_count));
total_time += count_time;
1999-05-03 09:29:11 +02:00
/* Credit all symbols that are covered by bin I.
PR gprof/13325: Make sure that K does not get decremented
and J will never be less than 0. */
for (j = k - 1; j < symtab.len; k = ++j)
1999-05-03 09:29:11 +02:00
{
sym_low_pc = symtab.base[j].hist.scaled_addr;
sym_high_pc = symtab.base[j + 1].hist.scaled_addr;
/* If high end of bin is below entry address,
go for next bin. */
1999-05-03 09:29:11 +02:00
if (bin_high_pc < sym_low_pc)
break;
/* If low end of bin is above high end of symbol,
go for next symbol. */
1999-05-03 09:29:11 +02:00
if (bin_low_pc >= sym_high_pc)
continue;
1999-05-03 09:29:11 +02:00
overlap =
MIN (bin_high_pc, sym_high_pc) - MAX (bin_low_pc, sym_low_pc);
if (overlap > 0)
{
DBG (SAMPLEDEBUG,
printf (
"[assign_samples] [0x%lx,0x%lx) %s gets %f ticks %ld overlap\n",
(unsigned long) symtab.base[j].addr,
(unsigned long) (sizeof (UNIT) * sym_high_pc),
symtab.base[j].name, overlap * count_time / hist_scale,
(long) overlap));
1999-05-03 09:29:11 +02:00
addr = symtab.base[j].addr;
credit = overlap * count_time / hist_scale;
/* Credit symbol if it appears in INCL_FLAT or that
table is empty and it does not appear it in
EXCL_FLAT. */
1999-05-03 09:29:11 +02:00
if (sym_lookup (&syms[INCL_FLAT], addr)
|| (syms[INCL_FLAT].len == 0
&& !sym_lookup (&syms[EXCL_FLAT], addr)))
{
symtab.base[j].hist.time += credit;
}
else
{
total_time -= credit;
}
}
}
}
1999-05-03 09:29:11 +02:00
DBG (SAMPLEDEBUG, printf ("[assign_samples] total_time %f\n",
total_time));
}
/* Calls 'hist_assign_sampes_1' for all histogram records read so far. */
void
hist_assign_samples ()
{
unsigned i;
scale_and_align_entries ();
for (i = 0; i < num_histograms; ++i)
hist_assign_samples_1 (&histograms[i]);
}
1999-05-03 09:29:11 +02:00
/* Print header for flag histogram profile. */
1999-05-03 09:29:11 +02:00
static void
print_header (int prefix)
1999-05-03 09:29:11 +02:00
{
char unit[64];
sprintf (unit, _("%c%c/call"), prefix, hist_dimension_abbrev);
if (bsd_style_output)
{
printf (_("\ngranularity: each sample hit covers %ld byte(s)"),
(long) hist_scale * (long) sizeof (UNIT));
1999-05-03 09:29:11 +02:00
if (total_time > 0.0)
{
printf (_(" for %.2f%% of %.2f %s\n\n"),
100.0 / total_time, total_time / hz, hist_dimension);
}
}
else
{
printf (_("\nEach sample counts as %g %s.\n"), 1.0 / hz, hist_dimension);
}
if (total_time <= 0.0)
{
printf (_(" no time accumulated\n\n"));
/* This doesn't hurt since all the numerators will be zero. */
1999-05-03 09:29:11 +02:00
total_time = 1.0;
}
printf ("%5.5s %10.10s %8.8s %8.8s %8.8s %8.8s %-8.8s\n",
"% ", _("cumulative"), _("self "), "", _("self "), _("total "),
"");
1999-05-03 09:29:11 +02:00
printf ("%5.5s %9.9s %8.8s %8.8s %8.8s %8.8s %-8.8s\n",
_("time"), hist_dimension, hist_dimension, _("calls"), unit, unit,
_("name"));
}
static void
print_line (Sym *sym, double scale)
1999-05-03 09:29:11 +02:00
{
if (ignore_zeros && sym->ncalls == 0 && sym->hist.time == 0)
return;
1999-05-03 09:29:11 +02:00
accum_time += sym->hist.time;
1999-05-03 09:29:11 +02:00
if (bsd_style_output)
printf ("%5.1f %10.2f %8.2f",
total_time > 0.0 ? 100 * sym->hist.time / total_time : 0.0,
accum_time / hz, sym->hist.time / hz);
1999-05-03 09:29:11 +02:00
else
printf ("%6.2f %9.2f %8.2f",
total_time > 0.0 ? 100 * sym->hist.time / total_time : 0.0,
accum_time / hz, sym->hist.time / hz);
1999-05-03 09:29:11 +02:00
if (sym->ncalls != 0)
printf (" %8lu %8.2f %8.2f ",
sym->ncalls, scale * sym->hist.time / hz / sym->ncalls,
scale * (sym->hist.time + sym->cg.child_time) / hz / sym->ncalls);
1999-05-03 09:29:11 +02:00
else
printf (" %8.8s %8.8s %8.8s ", "", "", "");
1999-05-03 09:29:11 +02:00
if (bsd_style_output)
print_name (sym);
1999-05-03 09:29:11 +02:00
else
print_name_only (sym);
1999-05-03 09:29:11 +02:00
printf ("\n");
}
/* Compare LP and RP. The primary comparison key is execution time,
the secondary is number of invocation, and the tertiary is the
lexicographic order of the function names. */
1999-05-03 09:29:11 +02:00
static int
cmp_time (const PTR lp, const PTR rp)
1999-05-03 09:29:11 +02:00
{
const Sym *left = *(const Sym **) lp;
const Sym *right = *(const Sym **) rp;
double time_diff;
time_diff = right->hist.time - left->hist.time;
1999-05-03 09:29:11 +02:00
if (time_diff > 0.0)
return 1;
1999-05-03 09:29:11 +02:00
if (time_diff < 0.0)
return -1;
1999-05-03 09:29:11 +02:00
if (right->ncalls > left->ncalls)
return 1;
1999-05-03 09:29:11 +02:00
if (right->ncalls < left->ncalls)
return -1;
1999-05-03 09:29:11 +02:00
return strcmp (left->name, right->name);
}
/* Print the flat histogram profile. */
1999-05-03 09:29:11 +02:00
void
hist_print ()
1999-05-03 09:29:11 +02:00
{
Sym **time_sorted_syms, *top_dog, *sym;
unsigned int sym_index;
unsigned log_scale;
double top_time;
1999-05-03 09:29:11 +02:00
bfd_vma addr;
if (first_output)
first_output = FALSE;
1999-05-03 09:29:11 +02:00
else
printf ("\f\n");
1999-05-03 09:29:11 +02:00
accum_time = 0.0;
1999-05-03 09:29:11 +02:00
if (bsd_style_output)
{
if (print_descriptions)
{
printf (_("\n\n\nflat profile:\n"));
flat_blurb (stdout);
}
}
else
{
printf (_("Flat profile:\n"));
}
/* Sort the symbol table by time (call-count and name as secondary
and tertiary keys). */
1999-05-03 09:29:11 +02:00
time_sorted_syms = (Sym **) xmalloc (symtab.len * sizeof (Sym *));
for (sym_index = 0; sym_index < symtab.len; ++sym_index)
time_sorted_syms[sym_index] = &symtab.base[sym_index];
1999-05-03 09:29:11 +02:00
qsort (time_sorted_syms, symtab.len, sizeof (Sym *), cmp_time);
if (bsd_style_output)
{
log_scale = 5; /* Milli-seconds is BSD-default. */
1999-05-03 09:29:11 +02:00
}
else
{
/* Search for symbol with highest per-call
execution time and scale accordingly. */
1999-05-03 09:29:11 +02:00
log_scale = 0;
top_dog = 0;
top_time = 0.0;
for (sym_index = 0; sym_index < symtab.len; ++sym_index)
1999-05-03 09:29:11 +02:00
{
sym = time_sorted_syms[sym_index];
1999-05-03 09:29:11 +02:00
if (sym->ncalls != 0)
{
double call_time;
call_time = (sym->hist.time + sym->cg.child_time) / sym->ncalls;
if (call_time > top_time)
1999-05-03 09:29:11 +02:00
{
top_dog = sym;
top_time = call_time;
1999-05-03 09:29:11 +02:00
}
}
}
1999-05-03 09:29:11 +02:00
if (top_dog && top_dog->ncalls != 0 && top_time > 0.0)
{
top_time /= hz;
for (log_scale = 0; log_scale < ARRAY_SIZE (SItab); log_scale ++)
1999-05-03 09:29:11 +02:00
{
double scaled_value = SItab[log_scale].scale * top_time;
if (scaled_value >= 1.0 && scaled_value < 1000.0)
break;
1999-05-03 09:29:11 +02:00
}
}
}
/* For now, the dimension is always seconds. In the future, we
may also want to support other (pseudo-)dimensions (such as
I-cache misses etc.). */
1999-05-03 09:29:11 +02:00
print_header (SItab[log_scale].prefix);
for (sym_index = 0; sym_index < symtab.len; ++sym_index)
1999-05-03 09:29:11 +02:00
{
addr = time_sorted_syms[sym_index]->addr;
/* Print symbol if its in INCL_FLAT table or that table
is empty and the symbol is not in EXCL_FLAT. */
1999-05-03 09:29:11 +02:00
if (sym_lookup (&syms[INCL_FLAT], addr)
|| (syms[INCL_FLAT].len == 0
&& !sym_lookup (&syms[EXCL_FLAT], addr)))
print_line (time_sorted_syms[sym_index], SItab[log_scale].scale);
1999-05-03 09:29:11 +02:00
}
1999-05-03 09:29:11 +02:00
free (time_sorted_syms);
if (print_descriptions && !bsd_style_output)
flat_blurb (stdout);
1999-05-03 09:29:11 +02:00
}
int
hist_check_address (unsigned address)
{
unsigned i;
for (i = 0; i < num_histograms; ++i)
if (histograms[i].lowpc <= address && address < histograms[i].highpc)
return 1;
return 0;
}
#if ! defined(min)
#define min(a,b) (((a)<(b)) ? (a) : (b))
#endif
#if ! defined(max)
#define max(a,b) (((a)>(b)) ? (a) : (b))
#endif
void
hist_clip_symbol_address (bfd_vma *p_lowpc, bfd_vma *p_highpc)
{
unsigned i;
int found = 0;
if (num_histograms == 0)
{
*p_highpc = *p_lowpc;
return;
}
for (i = 0; i < num_histograms; ++i)
{
bfd_vma common_low, common_high;
common_low = max (histograms[i].lowpc, *p_lowpc);
common_high = min (histograms[i].highpc, *p_highpc);
if (common_low < common_high)
{
if (found)
{
fprintf (stderr,
_("%s: found a symbol that covers "
2007-04-10 10:47:50 +02:00
"several histogram records"),
whoami);
done (1);
}
found = 1;
*p_lowpc = common_low;
*p_highpc = common_high;
}
}
if (!found)
*p_highpc = *p_lowpc;
}
/* Find and return exising histogram record having the same lowpc and
highpc as passed via the parameters. Return NULL if nothing is found.
The return value is valid until any new histogram is read. */
static histogram *
find_histogram (bfd_vma lowpc, bfd_vma highpc)
{
unsigned i;
for (i = 0; i < num_histograms; ++i)
{
if (histograms[i].lowpc == lowpc && histograms[i].highpc == highpc)
return &histograms[i];
}
return 0;
}
/* Given a PC, return histogram record which address range include this PC.
Return NULL if there's no such record. */
static histogram *
find_histogram_for_pc (bfd_vma pc)
{
unsigned i;
for (i = 0; i < num_histograms; ++i)
{
if (histograms[i].lowpc <= pc && pc < histograms[i].highpc)
return &histograms[i];
}
return 0;
}