binutils-gdb/gdb/rdi-share/serdrv.c

668 lines
16 KiB
C
Raw Normal View History

/*
* Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
*
* This software may be freely used, copied, modified, and distributed
* provided that the above copyright notice is preserved in all copies of the
* software.
*/
/* -*-C-*-
*
* $Revision$
* $Date$
*
*
* serdrv.c - Synchronous Serial Driver for Angel.
* This is nice and simple just to get something going.
*/
#ifdef __hpux
# define _POSIX_SOURCE 1
#endif
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "crc.h"
#include "devices.h"
#include "buffers.h"
#include "rxtx.h"
#include "hostchan.h"
#include "params.h"
#include "logging.h"
2000-01-11 04:07:37 +01:00
extern int baud_rate; /* From gdb/top.c */
#ifdef COMPILING_ON_WINDOWS
# undef ERROR
# undef IGNORE
# include <windows.h>
# include "angeldll.h"
# include "comb_api.h"
#else
# ifdef __hpux
# define _TERMIOS_INCLUDED
# include <sys/termio.h>
# undef _TERMIOS_INCLUDED
# else
# include <termios.h>
# endif
# include "unixcomm.h"
#endif
#ifndef UNUSED
# define UNUSED(x) (x = x) /* Silence compiler warnings */
#endif
#define MAXREADSIZE 512
#define MAXWRITESIZE 512
#define SERIAL_FC_SET ((1<<serial_XON)|(1<<serial_XOFF))
#define SERIAL_CTL_SET ((1<<serial_STX)|(1<<serial_ETX)|(1<<serial_ESC))
#define SERIAL_ESC_SET (SERIAL_FC_SET|SERIAL_CTL_SET)
static const struct re_config config = {
serial_STX, serial_ETX, serial_ESC, /* self-explanatory? */
SERIAL_FC_SET, /* set of flow-control characters */
SERIAL_ESC_SET, /* set of characters to be escaped */
NULL /* serial_flow_control */, NULL , /* what to do with FC chars */
angel_DD_RxEng_BufferAlloc, NULL /* how to get a buffer */
};
static struct re_state rxstate;
typedef struct writestate {
unsigned int wbindex;
/* static te_status testatus;*/
unsigned char writebuf[MAXWRITESIZE];
struct te_state txstate;
} writestate;
static struct writestate wstate;
/*
* The set of parameter options supported by the device
*/
static unsigned int baud_options[] = {
2000-01-18 01:55:13 +01:00
#if defined(B115200) || defined(__hpux)
2000-01-11 04:07:37 +01:00
115200,
#endif
2000-01-18 01:55:13 +01:00
#if defined(B57600) || defined(__hpux)
2000-01-11 04:07:37 +01:00
57600,
#endif
38400, 19200, 9600
};
static ParameterList param_list[] = {
{ AP_BAUD_RATE,
sizeof(baud_options)/sizeof(unsigned int),
baud_options }
};
static const ParameterOptions serial_options = {
sizeof(param_list)/sizeof(ParameterList), param_list };
/*
* The default parameter config for the device
*/
static Parameter param_default[] = {
{ AP_BAUD_RATE, 9600 }
};
static ParameterConfig serial_defaults = {
sizeof(param_default)/sizeof(Parameter), param_default };
/*
* The user-modified options for the device
*/
static unsigned int user_baud_options[sizeof(baud_options)/sizeof(unsigned)];
static ParameterList param_user_list[] = {
{ AP_BAUD_RATE,
sizeof(user_baud_options)/sizeof(unsigned),
user_baud_options }
};
static ParameterOptions user_options = {
sizeof(param_user_list)/sizeof(ParameterList), param_user_list };
static bool user_options_set;
/* forward declarations */
static int serial_reset( void );
static int serial_set_params( const ParameterConfig *config );
static int SerialMatch(const char *name, const char *arg);
static void process_baud_rate( unsigned int target_baud_rate )
{
const ParameterList *full_list;
ParameterList *user_list;
/* create subset of full options */
full_list = Angel_FindParamList( &serial_options, AP_BAUD_RATE );
user_list = Angel_FindParamList( &user_options, AP_BAUD_RATE );
if ( full_list != NULL && user_list != NULL )
{
unsigned int i, j;
unsigned int def_baud = 0;
/* find lower or equal to */
for ( i = 0; i < full_list->num_options; ++i )
if ( target_baud_rate >= full_list->option[i] )
{
/* copy remaining */
for ( j = 0; j < (full_list->num_options - i); ++j )
user_list->option[j] = full_list->option[i+j];
user_list->num_options = j;
/* check this is not the default */
Angel_FindParam( AP_BAUD_RATE, &serial_defaults, &def_baud );
if ( (j == 1) && (user_list->option[0] == def_baud) )
{
#ifdef DEBUG
printf( "user selected default\n" );
#endif
}
else
{
user_options_set = TRUE;
#ifdef DEBUG
printf( "user options are: " );
for ( j = 0; j < user_list->num_options; ++j )
printf( "%u ", user_list->option[j] );
printf( "\n" );
#endif
}
break; /* out of i loop */
}
#ifdef DEBUG
if ( i >= full_list->num_options )
printf( "couldn't match baud rate %u\n", target_baud_rate );
#endif
}
#ifdef DEBUG
else
printf( "failed to find lists\n" );
#endif
}
static int SerialOpen(const char *name, const char *arg)
{
const char *port_name = name;
#ifdef DEBUG
printf("SerialOpen: name %s arg %s\n", name, arg ? arg : "<NULL>");
#endif
#ifdef COMPILING_ON_WINDOWS
if (IsOpenSerial()) return -1;
#else
if (Unix_IsSerialInUse()) return -1;
#endif
#ifdef COMPILING_ON_WINDOWS
if (SerialMatch(name, arg) != adp_ok)
return adp_failed;
#else
port_name = Unix_MatchValidSerialDevice(port_name);
# ifdef DEBUG
printf("translated port to %s\n", port_name == 0 ? "NULL" : port_name);
# endif
if (port_name == 0) return adp_failed;
#endif
user_options_set = FALSE;
/* interpret and store the arguments */
if ( arg != NULL )
{
unsigned int target_baud_rate;
target_baud_rate = (unsigned int)strtoul(arg, NULL, 10);
if (target_baud_rate > 0)
{
#ifdef DEBUG
printf( "user selected baud rate %u\n", target_baud_rate );
#endif
process_baud_rate( target_baud_rate );
}
#ifdef DEBUG
else
printf( "could not understand baud rate %s\n", arg );
#endif
}
2000-01-11 04:07:37 +01:00
else if (baud_rate > 0)
{
/* If the user specified a baud rate on the command line "-b" or via
the "set remotebaud" command then try to use that one */
process_baud_rate( baud_rate );
}
#ifdef COMPILING_ON_WINDOWS
{
int port = IsValidDevice(name);
if (OpenSerial(port, FALSE) != COM_OK)
return -1;
}
#else
if (Unix_OpenSerial(port_name) < 0)
return -1;
#endif
serial_reset();
#if defined(__unix) || defined(__CYGWIN__)
Unix_ioctlNonBlocking();
#endif
Angel_RxEngineInit(&config, &rxstate);
/*
* DANGER!: passing in NULL as the packet is ok for now as it is just
* IGNOREd but this may well change
*/
Angel_TxEngineInit(&config, NULL, &wstate.txstate);
return 0;
}
static int SerialMatch(const char *name, const char *arg)
{
UNUSED(arg);
#ifdef COMPILING_ON_WINDOWS
if (IsValidDevice(name) == COM_DEVICENOTVALID)
return -1;
else
return 0;
#else
return Unix_MatchValidSerialDevice(name) == 0 ? -1 : 0;
#endif
}
static void SerialClose(void)
{
#ifdef DO_TRACE
printf("SerialClose()\n");
#endif
#ifdef COMPILING_ON_WINDOWS
CloseSerial();
#else
Unix_CloseSerial();
#endif
}
static int SerialRead(DriverCall *dc, bool block) {
static unsigned char readbuf[MAXREADSIZE];
static int rbindex=0;
int nread;
int read_errno;
int c=0;
re_status restatus;
int ret_code = -1; /* assume bad packet or error */
/* must not overflow buffer and must start after the existing data */
#ifdef COMPILING_ON_WINDOWS
{
BOOL dummy = FALSE;
nread = BytesInRXBufferSerial();
if (nread > MAXREADSIZE - rbindex)
nread = MAXREADSIZE - rbindex;
if ((read_errno = ReadSerial(readbuf+rbindex, nread, &dummy)) == COM_READFAIL)
{
MessageBox(GetFocus(), "Read error\n", "Angel", MB_OK | MB_ICONSTOP);
return -1; /* SJ - This really needs to return a value, which is picked up in */
/* DevSW_Read as meaning stop debugger but don't kill. */
}
else if (pfnProgressCallback != NULL && read_errno == COM_OK)
{
progressInfo.nRead += nread;
(*pfnProgressCallback)(&progressInfo);
}
}
#else
nread = Unix_ReadSerial(readbuf+rbindex, MAXREADSIZE-rbindex, block);
read_errno = errno;
#endif
if ((nread > 0) || (rbindex > 0)) {
#ifdef DO_TRACE
printf("[%d@%d] ", nread, rbindex);
#endif
if (nread>0)
rbindex = rbindex+nread;
do {
restatus = Angel_RxEngine(readbuf[c], &(dc->dc_packet), &rxstate);
#ifdef DO_TRACE
printf("<%02X ",readbuf[c]);
if (!(++c % 16))
printf("\n");
#else
c++;
#endif
} while (c<rbindex &&
((restatus == RS_IN_PKT) || (restatus == RS_WAIT_PKT)));
#ifdef DO_TRACE
if (c % 16)
printf("\n");
#endif
switch(restatus) {
case RS_GOOD_PKT:
ret_code = 1;
/* fall through to: */
case RS_BAD_PKT:
/*
* We now need to shuffle any left over data down to the
* beginning of our private buffer ready to be used
*for the next packet
*/
#ifdef DO_TRACE
printf("SerialRead() processed %d, moving down %d\n", c, rbindex-c);
#endif
if (c != rbindex) memmove((char *) readbuf, (char *) (readbuf+c),
rbindex-c);
rbindex -= c;
break;
case RS_IN_PKT:
case RS_WAIT_PKT:
rbindex = 0; /* will have processed all we had */
ret_code = 0;
break;
default:
#ifdef DEBUG
printf("Bad re_status in serialRead()\n");
#endif
break;
}
} else if (nread == 0)
ret_code = 0; /* nothing to read */
else if (read_errno == ERRNO_FOR_BLOCKED_IO) /* nread < 0 */
ret_code = 0;
#ifdef DEBUG
if ((nread<0) && (read_errno!=ERRNO_FOR_BLOCKED_IO))
perror("read() error in serialRead()");
#endif
return ret_code;
}
static int SerialWrite(DriverCall *dc) {
int nwritten = 0;
te_status testatus = TS_IN_PKT;
if (dc->dc_context == NULL) {
Angel_TxEngineInit(&config, &(dc->dc_packet), &(wstate.txstate));
wstate.wbindex = 0;
dc->dc_context = &wstate;
}
while ((testatus == TS_IN_PKT) && (wstate.wbindex < MAXWRITESIZE))
{
/* send the raw data through the tx engine to escape and encapsulate */
testatus = Angel_TxEngine(&(dc->dc_packet), &(wstate.txstate),
&(wstate.writebuf)[wstate.wbindex]);
if (testatus != TS_IDLE) wstate.wbindex++;
}
if (testatus == TS_IDLE) {
#ifdef DEBUG
printf("SerialWrite: testatus is TS_IDLE during preprocessing\n");
#endif
}
#ifdef DO_TRACE
{
int i = 0;
while (i<wstate.wbindex)
{
printf(">%02X ",wstate.writebuf[i]);
if (!(++i % 16))
printf("\n");
}
if (i % 16)
printf("\n");
}
#endif
#ifdef COMPILING_ON_WINDOWS
if (WriteSerial(wstate.writebuf, wstate.wbindex) == COM_OK)
{
nwritten = wstate.wbindex;
if (pfnProgressCallback != NULL)
{
progressInfo.nWritten += nwritten;
(*pfnProgressCallback)(&progressInfo);
}
}
else
{
MessageBox(GetFocus(), "Write error\n", "Angel", MB_OK | MB_ICONSTOP);
return -1; /* SJ - This really needs to return a value, which is picked up in */
/* DevSW_Read as meaning stop debugger but don't kill. */
}
#else
nwritten = Unix_WriteSerial(wstate.writebuf, wstate.wbindex);
if (nwritten < 0) {
nwritten=0;
}
#endif
#ifdef DEBUG
if (nwritten > 0)
printf("Wrote %#04x bytes\n", nwritten);
#endif
if ((unsigned) nwritten == wstate.wbindex &&
(testatus == TS_DONE_PKT || testatus == TS_IDLE)) {
/* finished sending the packet */
#ifdef DEBUG
printf("SerialWrite: calling Angel_TxEngineInit after sending packet (len=%i)\n",wstate.wbindex);
#endif
testatus = TS_IN_PKT;
wstate.wbindex = 0;
return 1;
}
else {
#ifdef DEBUG
printf("SerialWrite: Wrote part of packet wbindex=%i, nwritten=%i\n",
wstate.wbindex, nwritten);
#endif
/*
* still some data left to send shuffle whats left down and reset
* the ptr
*/
memmove((char *) wstate.writebuf, (char *) (wstate.writebuf+nwritten),
wstate.wbindex-nwritten);
wstate.wbindex -= nwritten;
return 0;
}
return -1;
}
static int serial_reset( void )
{
#ifdef DEBUG
printf( "serial_reset\n" );
#endif
#ifdef COMPILING_ON_WINDOWS
FlushSerial();
#else
Unix_ResetSerial();
#endif
return serial_set_params( &serial_defaults );
}
static int find_baud_rate( unsigned int *speed )
{
static struct {
unsigned int baud;
int termiosValue;
} possibleBaudRates[] = {
#if defined(__hpux)
{115200,_B115200}, {57600,_B57600},
2000-01-11 04:07:37 +01:00
#else
#ifdef B115200
{115200,B115200},
#endif
#ifdef B57600
{57600,B57600},
#endif
#endif
#ifdef COMPILING_ON_WINDOWS
{38400,CBR_38400}, {19200,CBR_19200}, {9600, CBR_9600}, {0,0}
#else
{38400,B38400}, {19200,B19200}, {9600, B9600}, {0,0}
#endif
};
unsigned int i;
/* look for lower or matching -- will always terminate at 0 end marker */
for ( i = 0; possibleBaudRates[i].baud > *speed; ++i )
/* do nothing */ ;
if ( possibleBaudRates[i].baud > 0 )
*speed = possibleBaudRates[i].baud;
return possibleBaudRates[i].termiosValue;
}
static int serial_set_params( const ParameterConfig *config )
{
unsigned int speed;
int termios_value;
#ifdef DEBUG
printf( "serial_set_params\n" );
#endif
if ( ! Angel_FindParam( AP_BAUD_RATE, config, &speed ) )
{
#ifdef DEBUG
printf( "speed not found in config\n" );
#endif
return DE_OKAY;
}
termios_value = find_baud_rate( &speed );
if ( termios_value == 0 )
{
#ifdef DEBUG
printf( "speed not valid: %u\n", speed );
#endif
return DE_OKAY;
}
#ifdef DEBUG
printf( "setting speed to %u\n", speed );
#endif
#ifdef COMPILING_ON_WINDOWS
SetBaudRate((WORD)termios_value);
#else
Unix_SetSerialBaudRate(termios_value);
#endif
return DE_OKAY;
}
static int serial_get_user_params( ParameterOptions **p_options )
{
#ifdef DEBUG
printf( "serial_get_user_params\n" );
#endif
if ( user_options_set )
{
*p_options = &user_options;
}
else
{
*p_options = NULL;
}
return DE_OKAY;
}
static int serial_get_default_params( ParameterConfig **p_config )
{
#ifdef DEBUG
printf( "serial_get_default_params\n" );
#endif
*p_config = (ParameterConfig *) &serial_defaults;
return DE_OKAY;
}
static int SerialIoctl(const int opcode, void *args) {
int ret_code;
#ifdef DEBUG
printf( "SerialIoctl: op %d arg %p\n", opcode, args ? args : "<NULL>");
#endif
switch (opcode)
{
case DC_RESET:
ret_code = serial_reset();
break;
case DC_SET_PARAMS:
ret_code = serial_set_params((const ParameterConfig *)args);
break;
case DC_GET_USER_PARAMS:
ret_code = serial_get_user_params((ParameterOptions **)args);
break;
case DC_GET_DEFAULT_PARAMS:
ret_code = serial_get_default_params((ParameterConfig **)args);
break;
default:
ret_code = DE_BAD_OP;
break;
}
return ret_code;
}
DeviceDescr angel_SerialDevice = {
"SERIAL",
SerialOpen,
SerialMatch,
SerialClose,
SerialRead,
SerialWrite,
SerialIoctl
};