binutils-gdb/gdb/btrace.h

508 lines
17 KiB
C
Raw Normal View History

/* Branch trace support for GDB, the GNU debugger.
Copyright (C) 2013-2016 Free Software Foundation, Inc.
Contributed by Intel Corp. <markus.t.metzger@intel.com>.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#ifndef BTRACE_H
#define BTRACE_H
/* Branch tracing (btrace) is a per-thread control-flow execution trace of the
inferior. For presentation purposes, the branch trace is represented as a
list of sequential control-flow blocks, one such list per thread. */
#include "btrace-common.h"
record-full/record-btrace: software/hardware breakpoint trap This adjusts the record targets to tell the core whether a trap was caused by a breakpoint. Targets that can do this should report breakpoint traps with the PC already adjusted, so this removes the re-incrementing record-full was doing. These targets need to be adjusted before process_stratum targets beneath are, otherwise target_supports_stopped_by_sw_breakpoint, etc. would fall through to the target beneath while recording/replaying, and the core would get confused. Tested on x86-64 Fedora 20, native and gdbserver. gdb/ChangeLog: 2015-03-04 Pedro Alves <palves@redhat.com> * btrace.h: Include target/waitstatus.h. (struct btrace_thread_info) <stop_reason>: New field. * record-btrace.c (record_btrace_step_thread): Use record_check_stopped_by_breakpoint instead of breakpoint_here_p. (record_btrace_decr_pc_after_break): Delete. (record_btrace_stopped_by_sw_breakpoint) (record_btrace_supports_stopped_by_sw_breakpoint) (record_btrace_stopped_by_hw_breakpoint) (record_btrace_supports_stopped_by_hw_breakpoint): New functions. (init_record_btrace_ops): Install them. * record-full.c (record_full_hw_watchpoint): Delete and replace with ... (record_full_stop_reason): ... this throughout. (record_full_exec_insn): Adjust. (record_full_wait_1): Adjust. No longer re-increment the PC. (record_full_wait_1): Adjust. Use record_check_stopped_by_breakpoint instead of breakpoint_here_p. (record_full_stopped_by_watchpoint): Adjust. (record_full_stopped_by_sw_breakpoint) (record_full_supports_stopped_by_sw_breakpoint) (record_full_supports_stopped_by_sw_breakpoint) (record_full_stopped_by_hw_breakpoint) (record_full_supports_stopped_by_hw_breakpoint): New functions. (init_record_full_ops, init_record_full_core_ops): Install them. * record.c (record_check_stopped_by_breakpoint): New function. * record.h: Include target/waitstatus.h. (record_check_stopped_by_breakpoint): New declaration.
2015-03-04 21:41:15 +01:00
#include "target/waitstatus.h" /* For enum target_stop_reason. */
Type-safe wrapper for enum flags This patch fixes C++ build errors like this: /home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive] | COREFILTER_HUGETLB_PRIVATE); ^ This is a case of enums used as bit flags. Unlike "regular" enums, these values are supposed to be or'ed together. However, in C++, the type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to an enum variable without a cast. That means that this: enum foo_flags flags = 0; if (...) flags |= FOO_FLAG1; if (...) flags |= FOO_FLAG2; ... would have to be written as: enum foo_flags flags = (enum foo_flags) 0; if (...) flags = (enum foo_flags) (flags | FOO_FLAG1); if (...) flags = (enum foo_flags) (flags | FOO_FLAG2); which is ... ugly. Alternatively, we'd have to use an int for the variable's type, which isn't ideal either. This patch instead adds an "enum flags" class. "enum flags" are exactly the enums where the values are bits that are meant to be ORed together. This allows writing code like the below, while with raw enums this would fail to compile without casts to enum type at the assignments to 'f': enum some_flag { flag_val1 = 1 << 1, flag_val2 = 1 << 2, flag_val3 = 1 << 3, flag_val4 = 1 << 4, }; DEF_ENUM_FLAGS_TYPE(enum some_flag, some_flags) some_flags f = flag_val1 | flag_val2; f |= flag_val3; It's also possible to assign literal zero to an enum flags variable (meaning, no flags), dispensing either adding an awkward explicit "no value" value to the enumeration or the cast to assignments from 0. For example: some_flags f = 0; f |= flag_val3 | flag_val4; Note that literal integers other than zero do fail to compile: some_flags f = 1; // error C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that case. gdb/ChangeLog: 2015-11-17 Pedro Alves <palves@redhat.com> * btrace.h: Include common/enum-flags.h. (btrace_insn_flags): Define. (struct btrace_insn) <flags>: Change type. (btrace_function_flags): Define. (struct btrace_function) <flags>: Change type. (btrace_thread_flags): Define. (struct btrace_thread_info) <flags>: Change type. * c-exp.y (token_flags): Rename to ... (token_flag): ... this. (token_flags): Define. (struct token) <flags>: Change type. * common/enum-flags.h: New file. * compile/compile-c-types.c (convert_qualified): Change type of 'quals' local. * compile/compile-internal.h: Include "common/enum-flags.h". (gcc_qualifiers_flags): Define. * completer.c (enum reg_completer_targets): Rename to ... (enum reg_completer_target): ... this. (reg_completer_targets): Define. (reg_or_group_completer_1): Change type of 'targets' parameter. * disasm.c (do_mixed_source_and_assembly_deprecated): Change type of 'psl_flags' local. (do_mixed_source_and_assembly): Change type of 'psl_flags' local. * infrun.c: Include "common/enum-flags.h". (enum step_over_what): Rename to ... (enum step_over_what_flag): ... this. (step_over_what): Change type. (start_step_over): Change type of 'step_what' local. (thread_still_needs_step_over): Now returns a step_over_what. Adjust. (keep_going_pass_signal): Change type of 'step_what' local. * linux-tdep.c: Include "common/enum-flags.h". (enum filterflags): Rename to ... (enum filter_flag): ... this. (filter_flags): Define. (dump_mapping_p): Change type of 'filterflags' parameter. (linux_find_memory_regions_full): Change type of 'filterflags' local. (linux_find_memory_regions_full): Pass the address of an unsigned int to sscanf instead of the address of an enum. * record-btrace.c (btrace_print_lines): Change type of local 'psl_flags'. (btrace_call_history): Replace 'flags' parameter with 'int_flags' parameter. Adjust. (record_btrace_call_history, record_btrace_call_history_range) (record_btrace_call_history_from): Rename 'flags' parameter to 'int_flags'. Use record_print_flags. * record.h: Include "common/enum-flags.h". (record_print_flags): Define. * source.c: Include "common/enum-flags.h". (print_source_lines_base, print_source_lines): Change type of flags parameter. * symtab.h: Include "common/enum-flags.h". (enum print_source_lines_flags): Rename to ... (enum print_source_lines_flag): ... this. (print_source_lines_flags): Define. (print_source_lines): Change prototype.
2015-11-17 14:31:29 +01:00
#include "common/enum-flags.h"
btrace: support Intel(R) Processor Trace Adds a new command "record btrace pt" to configure the kernel to use Intel(R) Processor Trace instead of Branch Trace Strore. The "record btrace" command chooses the tracing format automatically. Intel(R) Processor Trace support requires Linux 4.1 and libipt. gdb/ * NEWS: Announce new commands "record btrace pt" and "record pt". Announce new options "set|show record btrace pt buffer-size". * btrace.c: Include "rsp-low.h". Include "inttypes.h". (btrace_add_pc): Add forward declaration. (pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback) (pt_translate_cpu_vendor, btrace_finalize_ftrace_pt) (btrace_compute_ftrace_pt): New. (btrace_compute_ftrace): Support BTRACE_FORMAT_PT. (check_xml_btrace_version): Update version check. (parse_xml_raw, parse_xml_btrace_pt_config_cpu) (parse_xml_btrace_pt_raw, parse_xml_btrace_pt) (btrace_pt_config_cpu_attributes, btrace_pt_config_children) (btrace_pt_children): New. (btrace_children): Add support for "pt". (parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New. (btrace_conf_children): Add support for "pt". * btrace.h: Include "intel-pt.h". (btrace_pt_error): New. * common/btrace-common.c (btrace_format_string, btrace_data_fini) (btrace_data_empty): Support BTRACE_FORMAT_PT. * common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT. (struct btrace_config_pt): New. (struct btrace_config)<pt>: New. (struct btrace_data_pt_config, struct btrace_data_pt): New. (struct btrace_data)<pt>: New. * features/btrace-conf.dtd (btrace-conf)<pt>: New. (pt): New. * features/btrace.dtd (btrace)<pt>: New. (pt, pt-config, cpu): New. * nat/linux-btrace.c (perf_event_read, perf_event_read_all) (perf_event_pt_event_type, kernel_supports_pt) (linux_supports_pt): New. (linux_supports_btrace): Support BTRACE_FORMAT_PT. (linux_enable_bts): Free tinfo on error. (linux_enable_pt): New. (linux_enable_btrace): Support BTRACE_FORMAT_PT. (linux_disable_pt): New. (linux_disable_btrace): Support BTRACE_FORMAT_PT. (linux_fill_btrace_pt_config, linux_read_pt): New. (linux_read_btrace): Support BTRACE_FORMAT_PT. * nat/linux-btrace.h (struct btrace_tinfo_pt): New. (struct btrace_target_info)<pt>: New. * record-btrace.c (set_record_btrace_pt_cmdlist) (show_record_btrace_pt_cmdlist): New. (record_btrace_print_pt_conf): New. (record_btrace_print_conf): Support BTRACE_FORMAT_PT. (btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT. (cmd_record_btrace_pt_start): New. (cmd_record_btrace_start): Support BTRACE_FORMAT_PT. (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New. (_initialize_record_btrace): Add new commands. * remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New. (remote_protocol_features): Add "Qbtrace:pt". Add "Qbtrace-conf:pt:size". (remote_supports_btrace): Support BTRACE_FORMAT_PT. (btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size. (remote_enable_btrace): Support BTRACE_FORMAT_PT. (_initialize_remote): Add new commands. gdbserver/ * linux-low.c: Include "rsp-low.h" (linux_low_encode_pt_config, linux_low_encode_raw): New. (linux_low_read_btrace): Support BTRACE_FORMAT_PT. (linux_low_btrace_conf): Support BTRACE_FORMAT_PT. (handle_btrace_enable_pt): New. (handle_btrace_general_set): Support "pt". (handle_btrace_conf_general_set): Support "pt:size". doc/ * gdb.texinfo (Process Record and Replay): Spell out that variables and registers are not available during btrace replay. Describe the new "record btrace pt" command. Describe the new "set|show record btrace pt buffer-size" options. (General Query Packets): Describe the new Qbtrace:pt and Qbtrace-conf:pt:size packets. Expand "bts" to "Branch Trace Store". Update the branch trace DTD.
2014-01-24 13:45:47 +01:00
#if defined (HAVE_LIBIPT)
# include <intel-pt.h>
#endif
struct thread_info;
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
struct btrace_function;
/* A coarse instruction classification. */
enum btrace_insn_class
{
/* The instruction is something not listed below. */
BTRACE_INSN_OTHER,
/* The instruction is a function call. */
BTRACE_INSN_CALL,
/* The instruction is a function return. */
BTRACE_INSN_RETURN,
/* The instruction is an unconditional jump. */
BTRACE_INSN_JUMP
};
/* Instruction flags. */
enum btrace_insn_flag
{
/* The instruction has been executed speculatively. */
BTRACE_INSN_FLAG_SPECULATIVE = (1 << 0)
};
Type-safe wrapper for enum flags This patch fixes C++ build errors like this: /home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive] | COREFILTER_HUGETLB_PRIVATE); ^ This is a case of enums used as bit flags. Unlike "regular" enums, these values are supposed to be or'ed together. However, in C++, the type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to an enum variable without a cast. That means that this: enum foo_flags flags = 0; if (...) flags |= FOO_FLAG1; if (...) flags |= FOO_FLAG2; ... would have to be written as: enum foo_flags flags = (enum foo_flags) 0; if (...) flags = (enum foo_flags) (flags | FOO_FLAG1); if (...) flags = (enum foo_flags) (flags | FOO_FLAG2); which is ... ugly. Alternatively, we'd have to use an int for the variable's type, which isn't ideal either. This patch instead adds an "enum flags" class. "enum flags" are exactly the enums where the values are bits that are meant to be ORed together. This allows writing code like the below, while with raw enums this would fail to compile without casts to enum type at the assignments to 'f': enum some_flag { flag_val1 = 1 << 1, flag_val2 = 1 << 2, flag_val3 = 1 << 3, flag_val4 = 1 << 4, }; DEF_ENUM_FLAGS_TYPE(enum some_flag, some_flags) some_flags f = flag_val1 | flag_val2; f |= flag_val3; It's also possible to assign literal zero to an enum flags variable (meaning, no flags), dispensing either adding an awkward explicit "no value" value to the enumeration or the cast to assignments from 0. For example: some_flags f = 0; f |= flag_val3 | flag_val4; Note that literal integers other than zero do fail to compile: some_flags f = 1; // error C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that case. gdb/ChangeLog: 2015-11-17 Pedro Alves <palves@redhat.com> * btrace.h: Include common/enum-flags.h. (btrace_insn_flags): Define. (struct btrace_insn) <flags>: Change type. (btrace_function_flags): Define. (struct btrace_function) <flags>: Change type. (btrace_thread_flags): Define. (struct btrace_thread_info) <flags>: Change type. * c-exp.y (token_flags): Rename to ... (token_flag): ... this. (token_flags): Define. (struct token) <flags>: Change type. * common/enum-flags.h: New file. * compile/compile-c-types.c (convert_qualified): Change type of 'quals' local. * compile/compile-internal.h: Include "common/enum-flags.h". (gcc_qualifiers_flags): Define. * completer.c (enum reg_completer_targets): Rename to ... (enum reg_completer_target): ... this. (reg_completer_targets): Define. (reg_or_group_completer_1): Change type of 'targets' parameter. * disasm.c (do_mixed_source_and_assembly_deprecated): Change type of 'psl_flags' local. (do_mixed_source_and_assembly): Change type of 'psl_flags' local. * infrun.c: Include "common/enum-flags.h". (enum step_over_what): Rename to ... (enum step_over_what_flag): ... this. (step_over_what): Change type. (start_step_over): Change type of 'step_what' local. (thread_still_needs_step_over): Now returns a step_over_what. Adjust. (keep_going_pass_signal): Change type of 'step_what' local. * linux-tdep.c: Include "common/enum-flags.h". (enum filterflags): Rename to ... (enum filter_flag): ... this. (filter_flags): Define. (dump_mapping_p): Change type of 'filterflags' parameter. (linux_find_memory_regions_full): Change type of 'filterflags' local. (linux_find_memory_regions_full): Pass the address of an unsigned int to sscanf instead of the address of an enum. * record-btrace.c (btrace_print_lines): Change type of local 'psl_flags'. (btrace_call_history): Replace 'flags' parameter with 'int_flags' parameter. Adjust. (record_btrace_call_history, record_btrace_call_history_range) (record_btrace_call_history_from): Rename 'flags' parameter to 'int_flags'. Use record_print_flags. * record.h: Include "common/enum-flags.h". (record_print_flags): Define. * source.c: Include "common/enum-flags.h". (print_source_lines_base, print_source_lines): Change type of flags parameter. * symtab.h: Include "common/enum-flags.h". (enum print_source_lines_flags): Rename to ... (enum print_source_lines_flag): ... this. (print_source_lines_flags): Define. (print_source_lines): Change prototype.
2015-11-17 14:31:29 +01:00
DEF_ENUM_FLAGS_TYPE (enum btrace_insn_flag, btrace_insn_flags);
/* A branch trace instruction.
This represents a single instruction in a branch trace. */
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
struct btrace_insn
{
/* The address of this instruction. */
CORE_ADDR pc;
/* The size of this instruction in bytes. */
gdb_byte size;
/* The instruction class of this instruction. */
enum btrace_insn_class iclass;
/* A bit vector of BTRACE_INSN_FLAGS. */
Type-safe wrapper for enum flags This patch fixes C++ build errors like this: /home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive] | COREFILTER_HUGETLB_PRIVATE); ^ This is a case of enums used as bit flags. Unlike "regular" enums, these values are supposed to be or'ed together. However, in C++, the type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to an enum variable without a cast. That means that this: enum foo_flags flags = 0; if (...) flags |= FOO_FLAG1; if (...) flags |= FOO_FLAG2; ... would have to be written as: enum foo_flags flags = (enum foo_flags) 0; if (...) flags = (enum foo_flags) (flags | FOO_FLAG1); if (...) flags = (enum foo_flags) (flags | FOO_FLAG2); which is ... ugly. Alternatively, we'd have to use an int for the variable's type, which isn't ideal either. This patch instead adds an "enum flags" class. "enum flags" are exactly the enums where the values are bits that are meant to be ORed together. This allows writing code like the below, while with raw enums this would fail to compile without casts to enum type at the assignments to 'f': enum some_flag { flag_val1 = 1 << 1, flag_val2 = 1 << 2, flag_val3 = 1 << 3, flag_val4 = 1 << 4, }; DEF_ENUM_FLAGS_TYPE(enum some_flag, some_flags) some_flags f = flag_val1 | flag_val2; f |= flag_val3; It's also possible to assign literal zero to an enum flags variable (meaning, no flags), dispensing either adding an awkward explicit "no value" value to the enumeration or the cast to assignments from 0. For example: some_flags f = 0; f |= flag_val3 | flag_val4; Note that literal integers other than zero do fail to compile: some_flags f = 1; // error C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that case. gdb/ChangeLog: 2015-11-17 Pedro Alves <palves@redhat.com> * btrace.h: Include common/enum-flags.h. (btrace_insn_flags): Define. (struct btrace_insn) <flags>: Change type. (btrace_function_flags): Define. (struct btrace_function) <flags>: Change type. (btrace_thread_flags): Define. (struct btrace_thread_info) <flags>: Change type. * c-exp.y (token_flags): Rename to ... (token_flag): ... this. (token_flags): Define. (struct token) <flags>: Change type. * common/enum-flags.h: New file. * compile/compile-c-types.c (convert_qualified): Change type of 'quals' local. * compile/compile-internal.h: Include "common/enum-flags.h". (gcc_qualifiers_flags): Define. * completer.c (enum reg_completer_targets): Rename to ... (enum reg_completer_target): ... this. (reg_completer_targets): Define. (reg_or_group_completer_1): Change type of 'targets' parameter. * disasm.c (do_mixed_source_and_assembly_deprecated): Change type of 'psl_flags' local. (do_mixed_source_and_assembly): Change type of 'psl_flags' local. * infrun.c: Include "common/enum-flags.h". (enum step_over_what): Rename to ... (enum step_over_what_flag): ... this. (step_over_what): Change type. (start_step_over): Change type of 'step_what' local. (thread_still_needs_step_over): Now returns a step_over_what. Adjust. (keep_going_pass_signal): Change type of 'step_what' local. * linux-tdep.c: Include "common/enum-flags.h". (enum filterflags): Rename to ... (enum filter_flag): ... this. (filter_flags): Define. (dump_mapping_p): Change type of 'filterflags' parameter. (linux_find_memory_regions_full): Change type of 'filterflags' local. (linux_find_memory_regions_full): Pass the address of an unsigned int to sscanf instead of the address of an enum. * record-btrace.c (btrace_print_lines): Change type of local 'psl_flags'. (btrace_call_history): Replace 'flags' parameter with 'int_flags' parameter. Adjust. (record_btrace_call_history, record_btrace_call_history_range) (record_btrace_call_history_from): Rename 'flags' parameter to 'int_flags'. Use record_print_flags. * record.h: Include "common/enum-flags.h". (record_print_flags): Define. * source.c: Include "common/enum-flags.h". (print_source_lines_base, print_source_lines): Change type of flags parameter. * symtab.h: Include "common/enum-flags.h". (enum print_source_lines_flags): Rename to ... (enum print_source_lines_flag): ... this. (print_source_lines_flags): Define. (print_source_lines): Change prototype.
2015-11-17 14:31:29 +01:00
btrace_insn_flags flags;
};
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
/* A vector of branch trace instructions. */
typedef struct btrace_insn btrace_insn_s;
DEF_VEC_O (btrace_insn_s);
/* A doubly-linked list of branch trace function segments. */
struct btrace_func_link
{
struct btrace_function *prev;
struct btrace_function *next;
};
/* Flags for btrace function segments. */
enum btrace_function_flag
{
/* The 'up' link interpretation.
If set, it points to the function segment we returned to.
If clear, it points to the function segment we called from. */
BFUN_UP_LINKS_TO_RET = (1 << 0),
/* The 'up' link points to a tail call. This obviously only makes sense
if bfun_up_links_to_ret is clear. */
BFUN_UP_LINKS_TO_TAILCALL = (1 << 1)
};
Type-safe wrapper for enum flags This patch fixes C++ build errors like this: /home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive] | COREFILTER_HUGETLB_PRIVATE); ^ This is a case of enums used as bit flags. Unlike "regular" enums, these values are supposed to be or'ed together. However, in C++, the type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to an enum variable without a cast. That means that this: enum foo_flags flags = 0; if (...) flags |= FOO_FLAG1; if (...) flags |= FOO_FLAG2; ... would have to be written as: enum foo_flags flags = (enum foo_flags) 0; if (...) flags = (enum foo_flags) (flags | FOO_FLAG1); if (...) flags = (enum foo_flags) (flags | FOO_FLAG2); which is ... ugly. Alternatively, we'd have to use an int for the variable's type, which isn't ideal either. This patch instead adds an "enum flags" class. "enum flags" are exactly the enums where the values are bits that are meant to be ORed together. This allows writing code like the below, while with raw enums this would fail to compile without casts to enum type at the assignments to 'f': enum some_flag { flag_val1 = 1 << 1, flag_val2 = 1 << 2, flag_val3 = 1 << 3, flag_val4 = 1 << 4, }; DEF_ENUM_FLAGS_TYPE(enum some_flag, some_flags) some_flags f = flag_val1 | flag_val2; f |= flag_val3; It's also possible to assign literal zero to an enum flags variable (meaning, no flags), dispensing either adding an awkward explicit "no value" value to the enumeration or the cast to assignments from 0. For example: some_flags f = 0; f |= flag_val3 | flag_val4; Note that literal integers other than zero do fail to compile: some_flags f = 1; // error C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that case. gdb/ChangeLog: 2015-11-17 Pedro Alves <palves@redhat.com> * btrace.h: Include common/enum-flags.h. (btrace_insn_flags): Define. (struct btrace_insn) <flags>: Change type. (btrace_function_flags): Define. (struct btrace_function) <flags>: Change type. (btrace_thread_flags): Define. (struct btrace_thread_info) <flags>: Change type. * c-exp.y (token_flags): Rename to ... (token_flag): ... this. (token_flags): Define. (struct token) <flags>: Change type. * common/enum-flags.h: New file. * compile/compile-c-types.c (convert_qualified): Change type of 'quals' local. * compile/compile-internal.h: Include "common/enum-flags.h". (gcc_qualifiers_flags): Define. * completer.c (enum reg_completer_targets): Rename to ... (enum reg_completer_target): ... this. (reg_completer_targets): Define. (reg_or_group_completer_1): Change type of 'targets' parameter. * disasm.c (do_mixed_source_and_assembly_deprecated): Change type of 'psl_flags' local. (do_mixed_source_and_assembly): Change type of 'psl_flags' local. * infrun.c: Include "common/enum-flags.h". (enum step_over_what): Rename to ... (enum step_over_what_flag): ... this. (step_over_what): Change type. (start_step_over): Change type of 'step_what' local. (thread_still_needs_step_over): Now returns a step_over_what. Adjust. (keep_going_pass_signal): Change type of 'step_what' local. * linux-tdep.c: Include "common/enum-flags.h". (enum filterflags): Rename to ... (enum filter_flag): ... this. (filter_flags): Define. (dump_mapping_p): Change type of 'filterflags' parameter. (linux_find_memory_regions_full): Change type of 'filterflags' local. (linux_find_memory_regions_full): Pass the address of an unsigned int to sscanf instead of the address of an enum. * record-btrace.c (btrace_print_lines): Change type of local 'psl_flags'. (btrace_call_history): Replace 'flags' parameter with 'int_flags' parameter. Adjust. (record_btrace_call_history, record_btrace_call_history_range) (record_btrace_call_history_from): Rename 'flags' parameter to 'int_flags'. Use record_print_flags. * record.h: Include "common/enum-flags.h". (record_print_flags): Define. * source.c: Include "common/enum-flags.h". (print_source_lines_base, print_source_lines): Change type of flags parameter. * symtab.h: Include "common/enum-flags.h". (enum print_source_lines_flags): Rename to ... (enum print_source_lines_flag): ... this. (print_source_lines_flags): Define. (print_source_lines): Change prototype.
2015-11-17 14:31:29 +01:00
DEF_ENUM_FLAGS_TYPE (enum btrace_function_flag, btrace_function_flags);
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
record-btrace: indicate gaps Indicate gaps in the trace due to decode errors. Internally, a gap is represented as a btrace function segment without instructions and with a non-zero format-specific error code. Show the gap when traversing the instruction or function call history. Also indicate gaps in "info record". It looks like this: (gdb) info record Active record target: record-btrace Recording format: Branch Trace Store. Buffer size: 64KB. Recorded 32 instructions in 5 functions (1 gaps) for thread 1 (process 7182). (gdb) record function-call-history /cli 1 fib inst 1,9 at src/fib.c:9,14 2 fib inst 10,20 at src/fib.c:6,14 3 [decode error (1): instruction overflow] 4 fib inst 21,28 at src/fib.c:11,14 5 fib inst 29,33 at src/fib.c:6,9 (gdb) record instruction-history 20,22 20 0x000000000040062f <fib+47>: sub $0x1,%rax [decode error (1): instruction overflow] 21 0x0000000000400613 <fib+19>: add $0x1,%rax 22 0x0000000000400617 <fib+23>: mov %rax,0x200a3a(%rip) (gdb) Gaps are ignored during reverse execution and replay. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * btrace.c (ftrace_find_call): Skip gaps. (ftrace_new_function): Initialize level. (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return) (ftrace_new_switch): Update level computation. (ftrace_new_gap): New. (ftrace_update_function): Create new function after gap. (btrace_compute_ftrace_bts): Create gap on error. (btrace_stitch_bts): Update parameters. Clear trace if it becomes empty. (btrace_stitch_trace): Update parameters. Update callers. (btrace_clear): Reset the number of gaps. (btrace_insn_get): Return NULL if the iterator points to a gap. (btrace_insn_number): Return zero if the iterator points to a gap. (btrace_insn_end): Allow gaps at the end. (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps. (btrace_find_insn_by_number): Assert that the found iterator does not point to a gap. (btrace_call_next, btrace_call_prev): Assert that the last function is not a gap. * btrace.h (btrace_bts_error): New. (btrace_function): Update comment. (btrace_function) <insn, insn_offset, number>: Update comment. (btrace_function) <errcode>: New. (btrace_thread_info) <ngaps>: New. (btrace_thread_info) <replay>: Update comment. (btrace_insn_get): Update comment. * record-btrace.c (btrace_ui_out_decode_error): New. (record_btrace_info): Print number of gaps. (btrace_insn_history, btrace_call_history): Call btrace_ui_out_decode_error for gaps. (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps. testsuite/ * gdb.btrace/buffer-size.exp: Update "info record" output. * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2014-01-30 09:51:10 +01:00
/* Decode errors for the BTS recording format. */
enum btrace_bts_error
{
/* The instruction trace overflowed the end of the trace block. */
BDE_BTS_OVERFLOW = 1,
/* The instruction size could not be determined. */
BDE_BTS_INSN_SIZE
};
/* Decode errors for the Intel Processor Trace recording format. */
btrace: support Intel(R) Processor Trace Adds a new command "record btrace pt" to configure the kernel to use Intel(R) Processor Trace instead of Branch Trace Strore. The "record btrace" command chooses the tracing format automatically. Intel(R) Processor Trace support requires Linux 4.1 and libipt. gdb/ * NEWS: Announce new commands "record btrace pt" and "record pt". Announce new options "set|show record btrace pt buffer-size". * btrace.c: Include "rsp-low.h". Include "inttypes.h". (btrace_add_pc): Add forward declaration. (pt_reclassify_insn, ftrace_add_pt, btrace_pt_readmem_callback) (pt_translate_cpu_vendor, btrace_finalize_ftrace_pt) (btrace_compute_ftrace_pt): New. (btrace_compute_ftrace): Support BTRACE_FORMAT_PT. (check_xml_btrace_version): Update version check. (parse_xml_raw, parse_xml_btrace_pt_config_cpu) (parse_xml_btrace_pt_raw, parse_xml_btrace_pt) (btrace_pt_config_cpu_attributes, btrace_pt_config_children) (btrace_pt_children): New. (btrace_children): Add support for "pt". (parse_xml_btrace_conf_pt, btrace_conf_pt_attributes): New. (btrace_conf_children): Add support for "pt". * btrace.h: Include "intel-pt.h". (btrace_pt_error): New. * common/btrace-common.c (btrace_format_string, btrace_data_fini) (btrace_data_empty): Support BTRACE_FORMAT_PT. * common/btrace-common.h (btrace_format): Add BTRACE_FORMAT_PT. (struct btrace_config_pt): New. (struct btrace_config)<pt>: New. (struct btrace_data_pt_config, struct btrace_data_pt): New. (struct btrace_data)<pt>: New. * features/btrace-conf.dtd (btrace-conf)<pt>: New. (pt): New. * features/btrace.dtd (btrace)<pt>: New. (pt, pt-config, cpu): New. * nat/linux-btrace.c (perf_event_read, perf_event_read_all) (perf_event_pt_event_type, kernel_supports_pt) (linux_supports_pt): New. (linux_supports_btrace): Support BTRACE_FORMAT_PT. (linux_enable_bts): Free tinfo on error. (linux_enable_pt): New. (linux_enable_btrace): Support BTRACE_FORMAT_PT. (linux_disable_pt): New. (linux_disable_btrace): Support BTRACE_FORMAT_PT. (linux_fill_btrace_pt_config, linux_read_pt): New. (linux_read_btrace): Support BTRACE_FORMAT_PT. * nat/linux-btrace.h (struct btrace_tinfo_pt): New. (struct btrace_target_info)<pt>: New. * record-btrace.c (set_record_btrace_pt_cmdlist) (show_record_btrace_pt_cmdlist): New. (record_btrace_print_pt_conf): New. (record_btrace_print_conf): Support BTRACE_FORMAT_PT. (btrace_ui_out_decode_error): Support BTRACE_FORMAT_PT. (cmd_record_btrace_pt_start): New. (cmd_record_btrace_start): Support BTRACE_FORMAT_PT. (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): New. (_initialize_record_btrace): Add new commands. * remote.c (PACKET_Qbtrace_pt, PACKET_Qbtrace_conf_pt_size): New. (remote_protocol_features): Add "Qbtrace:pt". Add "Qbtrace-conf:pt:size". (remote_supports_btrace): Support BTRACE_FORMAT_PT. (btrace_sync_conf): Support PACKET_Qbtrace_conf_pt_size. (remote_enable_btrace): Support BTRACE_FORMAT_PT. (_initialize_remote): Add new commands. gdbserver/ * linux-low.c: Include "rsp-low.h" (linux_low_encode_pt_config, linux_low_encode_raw): New. (linux_low_read_btrace): Support BTRACE_FORMAT_PT. (linux_low_btrace_conf): Support BTRACE_FORMAT_PT. (handle_btrace_enable_pt): New. (handle_btrace_general_set): Support "pt". (handle_btrace_conf_general_set): Support "pt:size". doc/ * gdb.texinfo (Process Record and Replay): Spell out that variables and registers are not available during btrace replay. Describe the new "record btrace pt" command. Describe the new "set|show record btrace pt buffer-size" options. (General Query Packets): Describe the new Qbtrace:pt and Qbtrace-conf:pt:size packets. Expand "bts" to "Branch Trace Store". Update the branch trace DTD.
2014-01-24 13:45:47 +01:00
enum btrace_pt_error
{
/* The user cancelled trace processing. */
BDE_PT_USER_QUIT = 1,
/* Tracing was temporarily disabled. */
BDE_PT_DISABLED,
/* Trace recording overflowed. */
BDE_PT_OVERFLOW
/* Negative numbers are used by the decoder library. */
};
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
/* A branch trace function segment.
This represents a function segment in a branch trace, i.e. a consecutive
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
number of instructions belonging to the same function.
record-btrace: indicate gaps Indicate gaps in the trace due to decode errors. Internally, a gap is represented as a btrace function segment without instructions and with a non-zero format-specific error code. Show the gap when traversing the instruction or function call history. Also indicate gaps in "info record". It looks like this: (gdb) info record Active record target: record-btrace Recording format: Branch Trace Store. Buffer size: 64KB. Recorded 32 instructions in 5 functions (1 gaps) for thread 1 (process 7182). (gdb) record function-call-history /cli 1 fib inst 1,9 at src/fib.c:9,14 2 fib inst 10,20 at src/fib.c:6,14 3 [decode error (1): instruction overflow] 4 fib inst 21,28 at src/fib.c:11,14 5 fib inst 29,33 at src/fib.c:6,9 (gdb) record instruction-history 20,22 20 0x000000000040062f <fib+47>: sub $0x1,%rax [decode error (1): instruction overflow] 21 0x0000000000400613 <fib+19>: add $0x1,%rax 22 0x0000000000400617 <fib+23>: mov %rax,0x200a3a(%rip) (gdb) Gaps are ignored during reverse execution and replay. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * btrace.c (ftrace_find_call): Skip gaps. (ftrace_new_function): Initialize level. (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return) (ftrace_new_switch): Update level computation. (ftrace_new_gap): New. (ftrace_update_function): Create new function after gap. (btrace_compute_ftrace_bts): Create gap on error. (btrace_stitch_bts): Update parameters. Clear trace if it becomes empty. (btrace_stitch_trace): Update parameters. Update callers. (btrace_clear): Reset the number of gaps. (btrace_insn_get): Return NULL if the iterator points to a gap. (btrace_insn_number): Return zero if the iterator points to a gap. (btrace_insn_end): Allow gaps at the end. (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps. (btrace_find_insn_by_number): Assert that the found iterator does not point to a gap. (btrace_call_next, btrace_call_prev): Assert that the last function is not a gap. * btrace.h (btrace_bts_error): New. (btrace_function): Update comment. (btrace_function) <insn, insn_offset, number>: Update comment. (btrace_function) <errcode>: New. (btrace_thread_info) <ngaps>: New. (btrace_thread_info) <replay>: Update comment. (btrace_insn_get): Update comment. * record-btrace.c (btrace_ui_out_decode_error): New. (record_btrace_info): Print number of gaps. (btrace_insn_history, btrace_call_history): Call btrace_ui_out_decode_error for gaps. (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps. testsuite/ * gdb.btrace/buffer-size.exp: Update "info record" output. * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2014-01-30 09:51:10 +01:00
In case of decode errors, we add an empty function segment to indicate
the gap in the trace.
We do not allow function segments without instructions otherwise. */
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
struct btrace_function
{
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
/* The full and minimal symbol for the function. Both may be NULL. */
struct minimal_symbol *msym;
struct symbol *sym;
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
/* The previous and next segment belonging to the same function.
If a function calls another function, the former will have at least
two segments: one before the call and another after the return. */
struct btrace_func_link segment;
/* The previous and next function in control flow order. */
struct btrace_func_link flow;
/* The directly preceding function segment in a (fake) call stack. */
struct btrace_function *up;
/* The instructions in this function segment.
record-btrace: indicate gaps Indicate gaps in the trace due to decode errors. Internally, a gap is represented as a btrace function segment without instructions and with a non-zero format-specific error code. Show the gap when traversing the instruction or function call history. Also indicate gaps in "info record". It looks like this: (gdb) info record Active record target: record-btrace Recording format: Branch Trace Store. Buffer size: 64KB. Recorded 32 instructions in 5 functions (1 gaps) for thread 1 (process 7182). (gdb) record function-call-history /cli 1 fib inst 1,9 at src/fib.c:9,14 2 fib inst 10,20 at src/fib.c:6,14 3 [decode error (1): instruction overflow] 4 fib inst 21,28 at src/fib.c:11,14 5 fib inst 29,33 at src/fib.c:6,9 (gdb) record instruction-history 20,22 20 0x000000000040062f <fib+47>: sub $0x1,%rax [decode error (1): instruction overflow] 21 0x0000000000400613 <fib+19>: add $0x1,%rax 22 0x0000000000400617 <fib+23>: mov %rax,0x200a3a(%rip) (gdb) Gaps are ignored during reverse execution and replay. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * btrace.c (ftrace_find_call): Skip gaps. (ftrace_new_function): Initialize level. (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return) (ftrace_new_switch): Update level computation. (ftrace_new_gap): New. (ftrace_update_function): Create new function after gap. (btrace_compute_ftrace_bts): Create gap on error. (btrace_stitch_bts): Update parameters. Clear trace if it becomes empty. (btrace_stitch_trace): Update parameters. Update callers. (btrace_clear): Reset the number of gaps. (btrace_insn_get): Return NULL if the iterator points to a gap. (btrace_insn_number): Return zero if the iterator points to a gap. (btrace_insn_end): Allow gaps at the end. (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps. (btrace_find_insn_by_number): Assert that the found iterator does not point to a gap. (btrace_call_next, btrace_call_prev): Assert that the last function is not a gap. * btrace.h (btrace_bts_error): New. (btrace_function): Update comment. (btrace_function) <insn, insn_offset, number>: Update comment. (btrace_function) <errcode>: New. (btrace_thread_info) <ngaps>: New. (btrace_thread_info) <replay>: Update comment. (btrace_insn_get): Update comment. * record-btrace.c (btrace_ui_out_decode_error): New. (record_btrace_info): Print number of gaps. (btrace_insn_history, btrace_call_history): Call btrace_ui_out_decode_error for gaps. (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps. testsuite/ * gdb.btrace/buffer-size.exp: Update "info record" output. * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2014-01-30 09:51:10 +01:00
The instruction vector will be empty if the function segment
represents a decode error. */
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
VEC (btrace_insn_s) *insn;
record-btrace: indicate gaps Indicate gaps in the trace due to decode errors. Internally, a gap is represented as a btrace function segment without instructions and with a non-zero format-specific error code. Show the gap when traversing the instruction or function call history. Also indicate gaps in "info record". It looks like this: (gdb) info record Active record target: record-btrace Recording format: Branch Trace Store. Buffer size: 64KB. Recorded 32 instructions in 5 functions (1 gaps) for thread 1 (process 7182). (gdb) record function-call-history /cli 1 fib inst 1,9 at src/fib.c:9,14 2 fib inst 10,20 at src/fib.c:6,14 3 [decode error (1): instruction overflow] 4 fib inst 21,28 at src/fib.c:11,14 5 fib inst 29,33 at src/fib.c:6,9 (gdb) record instruction-history 20,22 20 0x000000000040062f <fib+47>: sub $0x1,%rax [decode error (1): instruction overflow] 21 0x0000000000400613 <fib+19>: add $0x1,%rax 22 0x0000000000400617 <fib+23>: mov %rax,0x200a3a(%rip) (gdb) Gaps are ignored during reverse execution and replay. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * btrace.c (ftrace_find_call): Skip gaps. (ftrace_new_function): Initialize level. (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return) (ftrace_new_switch): Update level computation. (ftrace_new_gap): New. (ftrace_update_function): Create new function after gap. (btrace_compute_ftrace_bts): Create gap on error. (btrace_stitch_bts): Update parameters. Clear trace if it becomes empty. (btrace_stitch_trace): Update parameters. Update callers. (btrace_clear): Reset the number of gaps. (btrace_insn_get): Return NULL if the iterator points to a gap. (btrace_insn_number): Return zero if the iterator points to a gap. (btrace_insn_end): Allow gaps at the end. (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps. (btrace_find_insn_by_number): Assert that the found iterator does not point to a gap. (btrace_call_next, btrace_call_prev): Assert that the last function is not a gap. * btrace.h (btrace_bts_error): New. (btrace_function): Update comment. (btrace_function) <insn, insn_offset, number>: Update comment. (btrace_function) <errcode>: New. (btrace_thread_info) <ngaps>: New. (btrace_thread_info) <replay>: Update comment. (btrace_insn_get): Update comment. * record-btrace.c (btrace_ui_out_decode_error): New. (record_btrace_info): Print number of gaps. (btrace_insn_history, btrace_call_history): Call btrace_ui_out_decode_error for gaps. (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps. testsuite/ * gdb.btrace/buffer-size.exp: Update "info record" output. * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2014-01-30 09:51:10 +01:00
/* The error code of a decode error that led to a gap.
Must be zero unless INSN is empty; non-zero otherwise. */
int errcode;
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
/* The instruction number offset for the first instruction in this
record-btrace: indicate gaps Indicate gaps in the trace due to decode errors. Internally, a gap is represented as a btrace function segment without instructions and with a non-zero format-specific error code. Show the gap when traversing the instruction or function call history. Also indicate gaps in "info record". It looks like this: (gdb) info record Active record target: record-btrace Recording format: Branch Trace Store. Buffer size: 64KB. Recorded 32 instructions in 5 functions (1 gaps) for thread 1 (process 7182). (gdb) record function-call-history /cli 1 fib inst 1,9 at src/fib.c:9,14 2 fib inst 10,20 at src/fib.c:6,14 3 [decode error (1): instruction overflow] 4 fib inst 21,28 at src/fib.c:11,14 5 fib inst 29,33 at src/fib.c:6,9 (gdb) record instruction-history 20,22 20 0x000000000040062f <fib+47>: sub $0x1,%rax [decode error (1): instruction overflow] 21 0x0000000000400613 <fib+19>: add $0x1,%rax 22 0x0000000000400617 <fib+23>: mov %rax,0x200a3a(%rip) (gdb) Gaps are ignored during reverse execution and replay. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * btrace.c (ftrace_find_call): Skip gaps. (ftrace_new_function): Initialize level. (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return) (ftrace_new_switch): Update level computation. (ftrace_new_gap): New. (ftrace_update_function): Create new function after gap. (btrace_compute_ftrace_bts): Create gap on error. (btrace_stitch_bts): Update parameters. Clear trace if it becomes empty. (btrace_stitch_trace): Update parameters. Update callers. (btrace_clear): Reset the number of gaps. (btrace_insn_get): Return NULL if the iterator points to a gap. (btrace_insn_number): Return zero if the iterator points to a gap. (btrace_insn_end): Allow gaps at the end. (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps. (btrace_find_insn_by_number): Assert that the found iterator does not point to a gap. (btrace_call_next, btrace_call_prev): Assert that the last function is not a gap. * btrace.h (btrace_bts_error): New. (btrace_function): Update comment. (btrace_function) <insn, insn_offset, number>: Update comment. (btrace_function) <errcode>: New. (btrace_thread_info) <ngaps>: New. (btrace_thread_info) <replay>: Update comment. (btrace_insn_get): Update comment. * record-btrace.c (btrace_ui_out_decode_error): New. (record_btrace_info): Print number of gaps. (btrace_insn_history, btrace_call_history): Call btrace_ui_out_decode_error for gaps. (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps. testsuite/ * gdb.btrace/buffer-size.exp: Update "info record" output. * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2014-01-30 09:51:10 +01:00
function segment.
If INSN is empty this is the insn_offset of the succeding function
segment in control-flow order. */
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
unsigned int insn_offset;
record-btrace: indicate gaps Indicate gaps in the trace due to decode errors. Internally, a gap is represented as a btrace function segment without instructions and with a non-zero format-specific error code. Show the gap when traversing the instruction or function call history. Also indicate gaps in "info record". It looks like this: (gdb) info record Active record target: record-btrace Recording format: Branch Trace Store. Buffer size: 64KB. Recorded 32 instructions in 5 functions (1 gaps) for thread 1 (process 7182). (gdb) record function-call-history /cli 1 fib inst 1,9 at src/fib.c:9,14 2 fib inst 10,20 at src/fib.c:6,14 3 [decode error (1): instruction overflow] 4 fib inst 21,28 at src/fib.c:11,14 5 fib inst 29,33 at src/fib.c:6,9 (gdb) record instruction-history 20,22 20 0x000000000040062f <fib+47>: sub $0x1,%rax [decode error (1): instruction overflow] 21 0x0000000000400613 <fib+19>: add $0x1,%rax 22 0x0000000000400617 <fib+23>: mov %rax,0x200a3a(%rip) (gdb) Gaps are ignored during reverse execution and replay. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * btrace.c (ftrace_find_call): Skip gaps. (ftrace_new_function): Initialize level. (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return) (ftrace_new_switch): Update level computation. (ftrace_new_gap): New. (ftrace_update_function): Create new function after gap. (btrace_compute_ftrace_bts): Create gap on error. (btrace_stitch_bts): Update parameters. Clear trace if it becomes empty. (btrace_stitch_trace): Update parameters. Update callers. (btrace_clear): Reset the number of gaps. (btrace_insn_get): Return NULL if the iterator points to a gap. (btrace_insn_number): Return zero if the iterator points to a gap. (btrace_insn_end): Allow gaps at the end. (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps. (btrace_find_insn_by_number): Assert that the found iterator does not point to a gap. (btrace_call_next, btrace_call_prev): Assert that the last function is not a gap. * btrace.h (btrace_bts_error): New. (btrace_function): Update comment. (btrace_function) <insn, insn_offset, number>: Update comment. (btrace_function) <errcode>: New. (btrace_thread_info) <ngaps>: New. (btrace_thread_info) <replay>: Update comment. (btrace_insn_get): Update comment. * record-btrace.c (btrace_ui_out_decode_error): New. (record_btrace_info): Print number of gaps. (btrace_insn_history, btrace_call_history): Call btrace_ui_out_decode_error for gaps. (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps. testsuite/ * gdb.btrace/buffer-size.exp: Update "info record" output. * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2014-01-30 09:51:10 +01:00
/* The function number in control-flow order.
If INSN is empty indicating a gap in the trace due to a decode error,
we still count the gap as a function. */
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
unsigned int number;
/* The function level in a back trace across the entire branch trace.
A caller's level is one lower than the level of its callee.
Levels can be negative if we see returns for which we have not seen
the corresponding calls. The branch trace thread information provides
a fixup to normalize function levels so the smallest level is zero. */
int level;
/* A bit-vector of btrace_function_flag. */
Type-safe wrapper for enum flags This patch fixes C++ build errors like this: /home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive] | COREFILTER_HUGETLB_PRIVATE); ^ This is a case of enums used as bit flags. Unlike "regular" enums, these values are supposed to be or'ed together. However, in C++, the type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to an enum variable without a cast. That means that this: enum foo_flags flags = 0; if (...) flags |= FOO_FLAG1; if (...) flags |= FOO_FLAG2; ... would have to be written as: enum foo_flags flags = (enum foo_flags) 0; if (...) flags = (enum foo_flags) (flags | FOO_FLAG1); if (...) flags = (enum foo_flags) (flags | FOO_FLAG2); which is ... ugly. Alternatively, we'd have to use an int for the variable's type, which isn't ideal either. This patch instead adds an "enum flags" class. "enum flags" are exactly the enums where the values are bits that are meant to be ORed together. This allows writing code like the below, while with raw enums this would fail to compile without casts to enum type at the assignments to 'f': enum some_flag { flag_val1 = 1 << 1, flag_val2 = 1 << 2, flag_val3 = 1 << 3, flag_val4 = 1 << 4, }; DEF_ENUM_FLAGS_TYPE(enum some_flag, some_flags) some_flags f = flag_val1 | flag_val2; f |= flag_val3; It's also possible to assign literal zero to an enum flags variable (meaning, no flags), dispensing either adding an awkward explicit "no value" value to the enumeration or the cast to assignments from 0. For example: some_flags f = 0; f |= flag_val3 | flag_val4; Note that literal integers other than zero do fail to compile: some_flags f = 1; // error C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that case. gdb/ChangeLog: 2015-11-17 Pedro Alves <palves@redhat.com> * btrace.h: Include common/enum-flags.h. (btrace_insn_flags): Define. (struct btrace_insn) <flags>: Change type. (btrace_function_flags): Define. (struct btrace_function) <flags>: Change type. (btrace_thread_flags): Define. (struct btrace_thread_info) <flags>: Change type. * c-exp.y (token_flags): Rename to ... (token_flag): ... this. (token_flags): Define. (struct token) <flags>: Change type. * common/enum-flags.h: New file. * compile/compile-c-types.c (convert_qualified): Change type of 'quals' local. * compile/compile-internal.h: Include "common/enum-flags.h". (gcc_qualifiers_flags): Define. * completer.c (enum reg_completer_targets): Rename to ... (enum reg_completer_target): ... this. (reg_completer_targets): Define. (reg_or_group_completer_1): Change type of 'targets' parameter. * disasm.c (do_mixed_source_and_assembly_deprecated): Change type of 'psl_flags' local. (do_mixed_source_and_assembly): Change type of 'psl_flags' local. * infrun.c: Include "common/enum-flags.h". (enum step_over_what): Rename to ... (enum step_over_what_flag): ... this. (step_over_what): Change type. (start_step_over): Change type of 'step_what' local. (thread_still_needs_step_over): Now returns a step_over_what. Adjust. (keep_going_pass_signal): Change type of 'step_what' local. * linux-tdep.c: Include "common/enum-flags.h". (enum filterflags): Rename to ... (enum filter_flag): ... this. (filter_flags): Define. (dump_mapping_p): Change type of 'filterflags' parameter. (linux_find_memory_regions_full): Change type of 'filterflags' local. (linux_find_memory_regions_full): Pass the address of an unsigned int to sscanf instead of the address of an enum. * record-btrace.c (btrace_print_lines): Change type of local 'psl_flags'. (btrace_call_history): Replace 'flags' parameter with 'int_flags' parameter. Adjust. (record_btrace_call_history, record_btrace_call_history_range) (record_btrace_call_history_from): Rename 'flags' parameter to 'int_flags'. Use record_print_flags. * record.h: Include "common/enum-flags.h". (record_print_flags): Define. * source.c: Include "common/enum-flags.h". (print_source_lines_base, print_source_lines): Change type of flags parameter. * symtab.h: Include "common/enum-flags.h". (enum print_source_lines_flags): Rename to ... (enum print_source_lines_flag): ... this. (print_source_lines_flags): Define. (print_source_lines): Change prototype.
2015-11-17 14:31:29 +01:00
btrace_function_flags flags;
};
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
/* A branch trace instruction iterator. */
struct btrace_insn_iterator
{
/* The branch trace function segment containing the instruction.
Will never be NULL. */
const struct btrace_function *function;
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
/* The index into the function segment's instruction vector. */
unsigned int index;
};
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
/* A branch trace function call iterator. */
struct btrace_call_iterator
{
/* The branch trace information for this thread. Will never be NULL. */
const struct btrace_thread_info *btinfo;
/* The branch trace function segment.
This will be NULL for the iterator pointing to the end of the trace. */
const struct btrace_function *function;
};
/* Branch trace iteration state for "record instruction-history". */
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
struct btrace_insn_history
{
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
/* The branch trace instruction range from BEGIN (inclusive) to
END (exclusive) that has been covered last time. */
struct btrace_insn_iterator begin;
struct btrace_insn_iterator end;
};
/* Branch trace iteration state for "record function-call-history". */
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
struct btrace_call_history
{
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
/* The branch trace function range from BEGIN (inclusive) to END (exclusive)
that has been covered last time. */
struct btrace_call_iterator begin;
struct btrace_call_iterator end;
};
record-btrace: add (reverse-)stepping support Provide to_resume and to_wait target methods for the btrace record target to allow reverse stepping and replay support. Replay is limited in the sense that only stepping and source correlation are supported. We do not record data and thus can not show variables. Non-stop mode is not working. Do not allow record-btrace in non-stop mode. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (btrace_thread_flag): New. (struct btrace_thread_info) <flags>: New. * record-btrace.c (record_btrace_resume_thread) (record_btrace_find_thread_to_move, btrace_step_no_history) (btrace_step_stopped, record_btrace_start_replaying) (record_btrace_step_thread, record_btrace_decr_pc_after_break) (record_btrace_find_resume_thread): New. (record_btrace_resume, record_btrace_wait): Extend. (record_btrace_can_execute_reverse): New. (record_btrace_open): Fail in non-stop mode. (record_btrace_set_replay): Split into this, ... (record_btrace_stop_replaying): ... this, ... (record_btrace_clear_histories): ... and this. (init_record_btrace_ops): Init to_can_execute_reverse. * NEWS: Announce it. testsuite/ * gdb.btrace/delta.exp: Check reverse stepi. * gdb.btrace/tailcall.exp: Update. Add stepping tests. * gdb.btrace/finish.exp: New. * gdb.btrace/next.exp: New. * gdb.btrace/nexti.exp: New. * gdb.btrace/record_goto.c: Add comments. * gdb.btrace/step.exp: New. * gdb.btrace/stepi.exp: New. * gdb.btrace/multi-thread-step.c: New. * gdb.btrace/multi-thread-step.exp: New. * gdb.btrace/rn-dl-bind.c: New. * gdb.btrace/rn-dl-bind.exp: New. * gdb.btrace/data.c: New. * gdb.btrace/data.exp: New. * gdb.btrace/Makefile.in (EXECUTABLES): Add new. doc/ * gdb.texinfo: Document limited reverse/replay support for target record-btrace.
2013-05-06 16:04:46 +02:00
/* Branch trace thread flags. */
enum btrace_thread_flag
{
/* The thread is to be stepped forwards. */
BTHR_STEP = (1 << 0),
/* The thread is to be stepped backwards. */
BTHR_RSTEP = (1 << 1),
/* The thread is to be continued forwards. */
BTHR_CONT = (1 << 2),
/* The thread is to be continued backwards. */
BTHR_RCONT = (1 << 3),
/* The thread is to be moved. */
BTHR_MOVE = (BTHR_STEP | BTHR_RSTEP | BTHR_CONT | BTHR_RCONT),
/* The thread is to be stopped. */
BTHR_STOP = (1 << 4)
record-btrace: add (reverse-)stepping support Provide to_resume and to_wait target methods for the btrace record target to allow reverse stepping and replay support. Replay is limited in the sense that only stepping and source correlation are supported. We do not record data and thus can not show variables. Non-stop mode is not working. Do not allow record-btrace in non-stop mode. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (btrace_thread_flag): New. (struct btrace_thread_info) <flags>: New. * record-btrace.c (record_btrace_resume_thread) (record_btrace_find_thread_to_move, btrace_step_no_history) (btrace_step_stopped, record_btrace_start_replaying) (record_btrace_step_thread, record_btrace_decr_pc_after_break) (record_btrace_find_resume_thread): New. (record_btrace_resume, record_btrace_wait): Extend. (record_btrace_can_execute_reverse): New. (record_btrace_open): Fail in non-stop mode. (record_btrace_set_replay): Split into this, ... (record_btrace_stop_replaying): ... this, ... (record_btrace_clear_histories): ... and this. (init_record_btrace_ops): Init to_can_execute_reverse. * NEWS: Announce it. testsuite/ * gdb.btrace/delta.exp: Check reverse stepi. * gdb.btrace/tailcall.exp: Update. Add stepping tests. * gdb.btrace/finish.exp: New. * gdb.btrace/next.exp: New. * gdb.btrace/nexti.exp: New. * gdb.btrace/record_goto.c: Add comments. * gdb.btrace/step.exp: New. * gdb.btrace/stepi.exp: New. * gdb.btrace/multi-thread-step.c: New. * gdb.btrace/multi-thread-step.exp: New. * gdb.btrace/rn-dl-bind.c: New. * gdb.btrace/rn-dl-bind.exp: New. * gdb.btrace/data.c: New. * gdb.btrace/data.exp: New. * gdb.btrace/Makefile.in (EXECUTABLES): Add new. doc/ * gdb.texinfo: Document limited reverse/replay support for target record-btrace.
2013-05-06 16:04:46 +02:00
};
Type-safe wrapper for enum flags This patch fixes C++ build errors like this: /home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive] | COREFILTER_HUGETLB_PRIVATE); ^ This is a case of enums used as bit flags. Unlike "regular" enums, these values are supposed to be or'ed together. However, in C++, the type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to an enum variable without a cast. That means that this: enum foo_flags flags = 0; if (...) flags |= FOO_FLAG1; if (...) flags |= FOO_FLAG2; ... would have to be written as: enum foo_flags flags = (enum foo_flags) 0; if (...) flags = (enum foo_flags) (flags | FOO_FLAG1); if (...) flags = (enum foo_flags) (flags | FOO_FLAG2); which is ... ugly. Alternatively, we'd have to use an int for the variable's type, which isn't ideal either. This patch instead adds an "enum flags" class. "enum flags" are exactly the enums where the values are bits that are meant to be ORed together. This allows writing code like the below, while with raw enums this would fail to compile without casts to enum type at the assignments to 'f': enum some_flag { flag_val1 = 1 << 1, flag_val2 = 1 << 2, flag_val3 = 1 << 3, flag_val4 = 1 << 4, }; DEF_ENUM_FLAGS_TYPE(enum some_flag, some_flags) some_flags f = flag_val1 | flag_val2; f |= flag_val3; It's also possible to assign literal zero to an enum flags variable (meaning, no flags), dispensing either adding an awkward explicit "no value" value to the enumeration or the cast to assignments from 0. For example: some_flags f = 0; f |= flag_val3 | flag_val4; Note that literal integers other than zero do fail to compile: some_flags f = 1; // error C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that case. gdb/ChangeLog: 2015-11-17 Pedro Alves <palves@redhat.com> * btrace.h: Include common/enum-flags.h. (btrace_insn_flags): Define. (struct btrace_insn) <flags>: Change type. (btrace_function_flags): Define. (struct btrace_function) <flags>: Change type. (btrace_thread_flags): Define. (struct btrace_thread_info) <flags>: Change type. * c-exp.y (token_flags): Rename to ... (token_flag): ... this. (token_flags): Define. (struct token) <flags>: Change type. * common/enum-flags.h: New file. * compile/compile-c-types.c (convert_qualified): Change type of 'quals' local. * compile/compile-internal.h: Include "common/enum-flags.h". (gcc_qualifiers_flags): Define. * completer.c (enum reg_completer_targets): Rename to ... (enum reg_completer_target): ... this. (reg_completer_targets): Define. (reg_or_group_completer_1): Change type of 'targets' parameter. * disasm.c (do_mixed_source_and_assembly_deprecated): Change type of 'psl_flags' local. (do_mixed_source_and_assembly): Change type of 'psl_flags' local. * infrun.c: Include "common/enum-flags.h". (enum step_over_what): Rename to ... (enum step_over_what_flag): ... this. (step_over_what): Change type. (start_step_over): Change type of 'step_what' local. (thread_still_needs_step_over): Now returns a step_over_what. Adjust. (keep_going_pass_signal): Change type of 'step_what' local. * linux-tdep.c: Include "common/enum-flags.h". (enum filterflags): Rename to ... (enum filter_flag): ... this. (filter_flags): Define. (dump_mapping_p): Change type of 'filterflags' parameter. (linux_find_memory_regions_full): Change type of 'filterflags' local. (linux_find_memory_regions_full): Pass the address of an unsigned int to sscanf instead of the address of an enum. * record-btrace.c (btrace_print_lines): Change type of local 'psl_flags'. (btrace_call_history): Replace 'flags' parameter with 'int_flags' parameter. Adjust. (record_btrace_call_history, record_btrace_call_history_range) (record_btrace_call_history_from): Rename 'flags' parameter to 'int_flags'. Use record_print_flags. * record.h: Include "common/enum-flags.h". (record_print_flags): Define. * source.c: Include "common/enum-flags.h". (print_source_lines_base, print_source_lines): Change type of flags parameter. * symtab.h: Include "common/enum-flags.h". (enum print_source_lines_flags): Rename to ... (enum print_source_lines_flag): ... this. (print_source_lines_flags): Define. (print_source_lines): Change prototype.
2015-11-17 14:31:29 +01:00
DEF_ENUM_FLAGS_TYPE (enum btrace_thread_flag, btrace_thread_flags);
record-btrace: add (reverse-)stepping support Provide to_resume and to_wait target methods for the btrace record target to allow reverse stepping and replay support. Replay is limited in the sense that only stepping and source correlation are supported. We do not record data and thus can not show variables. Non-stop mode is not working. Do not allow record-btrace in non-stop mode. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (btrace_thread_flag): New. (struct btrace_thread_info) <flags>: New. * record-btrace.c (record_btrace_resume_thread) (record_btrace_find_thread_to_move, btrace_step_no_history) (btrace_step_stopped, record_btrace_start_replaying) (record_btrace_step_thread, record_btrace_decr_pc_after_break) (record_btrace_find_resume_thread): New. (record_btrace_resume, record_btrace_wait): Extend. (record_btrace_can_execute_reverse): New. (record_btrace_open): Fail in non-stop mode. (record_btrace_set_replay): Split into this, ... (record_btrace_stop_replaying): ... this, ... (record_btrace_clear_histories): ... and this. (init_record_btrace_ops): Init to_can_execute_reverse. * NEWS: Announce it. testsuite/ * gdb.btrace/delta.exp: Check reverse stepi. * gdb.btrace/tailcall.exp: Update. Add stepping tests. * gdb.btrace/finish.exp: New. * gdb.btrace/next.exp: New. * gdb.btrace/nexti.exp: New. * gdb.btrace/record_goto.c: Add comments. * gdb.btrace/step.exp: New. * gdb.btrace/stepi.exp: New. * gdb.btrace/multi-thread-step.c: New. * gdb.btrace/multi-thread-step.exp: New. * gdb.btrace/rn-dl-bind.c: New. * gdb.btrace/rn-dl-bind.exp: New. * gdb.btrace/data.c: New. * gdb.btrace/data.exp: New. * gdb.btrace/Makefile.in (EXECUTABLES): Add new. doc/ * gdb.texinfo: Document limited reverse/replay support for target record-btrace.
2013-05-06 16:04:46 +02:00
btrace: maintenance commands Add maintenance commands that help debugging the btrace record target. The following new commands are added: maint info btrace Print information about branch tracing internals. maint btrace packet-history Print the raw branch tracing data. maint btrace clear-packet-history Discard the stored raw branch tracing data. maint btrace clear Discard all branch tracing data. It will be fetched and processed anew by the next "record" command. maint set|show btrace pt skip-pad Set and show whether PAD packets are skipped when computing the packet history. gdb/ * btrace.c: Include gdbcmd.h, cli/cli-utils.h, and ctype.h. (maint_btrace_cmdlist, maint_btrace_set_cmdlist) (maint_btrace_show_cmdlist, maint_btrace_pt_set_cmdlist) (maint_btrace_pt_show_cmdlist, maint_btrace_pt_skip_pad) (btrace_maint_clear): New. (btrace_fetch, btrace_clear): Call btrace_maint_clear. (pt_print_packet, btrace_maint_decode_pt) (btrace_maint_update_pt_packets, btrace_maint_update_packets) (btrace_maint_print_packets, get_uint, get_context_size, no_chunk) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd, maint_btrace_clear_cmd) (maint_btrace_cmd, maint_btrace_set_cmd, maint_btrace_show_cmd) (maint_btrace_pt_set_cmd, maint_btrace_pt_show_cmd) (maint_info_btrace_cmd, _initialize_btrace): New. * btrace.h (btrace_pt_packet, btrace_pt_packet_s) (btrace_maint_packet_history, btrace_maint_info): New. (btrace_thread_info) <maint>: New. * NEWS: Announce it. doc/ * gdb.texinfo (Maintenance Commands): Document "maint btrace" commands.
2014-02-03 14:35:28 +01:00
#if defined (HAVE_LIBIPT)
/* A packet. */
struct btrace_pt_packet
{
/* The offset in the trace stream. */
uint64_t offset;
/* The decode error code. */
enum pt_error_code errcode;
/* The decoded packet. Only valid if ERRCODE == pte_ok. */
struct pt_packet packet;
};
/* Define functions operating on a vector of packets. */
typedef struct btrace_pt_packet btrace_pt_packet_s;
DEF_VEC_O (btrace_pt_packet_s);
#endif /* defined (HAVE_LIBIPT) */
/* Branch trace iteration state for "maintenance btrace packet-history". */
struct btrace_maint_packet_history
{
/* The branch trace packet range from BEGIN (inclusive) to
END (exclusive) that has been covered last time. */
unsigned int begin;
unsigned int end;
};
/* Branch trace maintenance information per thread.
This information is used by "maintenance btrace" commands. */
struct btrace_maint_info
{
/* Most information is format-specific.
The format can be found in the BTRACE.DATA.FORMAT field of each thread. */
union
{
/* BTRACE.DATA.FORMAT == BTRACE_FORMAT_BTS */
struct
{
/* The packet history iterator.
We are iterating over BTRACE.DATA.FORMAT.VARIANT.BTS.BLOCKS. */
struct btrace_maint_packet_history packet_history;
} bts;
#if defined (HAVE_LIBIPT)
/* BTRACE.DATA.FORMAT == BTRACE_FORMAT_PT */
struct
{
/* A vector of decoded packets. */
VEC (btrace_pt_packet_s) *packets;
/* The packet history iterator.
We are iterating over the above PACKETS vector. */
struct btrace_maint_packet_history packet_history;
} pt;
#endif /* defined (HAVE_LIBIPT) */
} variant;
};
/* Branch trace information per thread.
This represents the branch trace configuration as well as the entry point
into the branch trace data. For the latter, it also contains the index into
an array of branch trace blocks used for iterating though the branch trace
blocks of a thread. */
struct btrace_thread_info
{
/* The target branch trace information for this thread.
This contains the branch trace configuration as well as any
target-specific information necessary for implementing branch tracing on
the underlying architecture. */
struct btrace_target_info *target;
/* The raw branch trace data for the below branch trace. */
struct btrace_data data;
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
/* The current branch trace for this thread (both inclusive).
The last instruction of END is the current instruction, which is not
part of the execution history.
Both will be NULL if there is no branch trace available. If there is
branch trace available, both will be non-NULL. */
struct btrace_function *begin;
struct btrace_function *end;
/* The function level offset. When added to each function's LEVEL,
this normalizes the function levels such that the smallest level
becomes zero. */
int level;
record-btrace: indicate gaps Indicate gaps in the trace due to decode errors. Internally, a gap is represented as a btrace function segment without instructions and with a non-zero format-specific error code. Show the gap when traversing the instruction or function call history. Also indicate gaps in "info record". It looks like this: (gdb) info record Active record target: record-btrace Recording format: Branch Trace Store. Buffer size: 64KB. Recorded 32 instructions in 5 functions (1 gaps) for thread 1 (process 7182). (gdb) record function-call-history /cli 1 fib inst 1,9 at src/fib.c:9,14 2 fib inst 10,20 at src/fib.c:6,14 3 [decode error (1): instruction overflow] 4 fib inst 21,28 at src/fib.c:11,14 5 fib inst 29,33 at src/fib.c:6,9 (gdb) record instruction-history 20,22 20 0x000000000040062f <fib+47>: sub $0x1,%rax [decode error (1): instruction overflow] 21 0x0000000000400613 <fib+19>: add $0x1,%rax 22 0x0000000000400617 <fib+23>: mov %rax,0x200a3a(%rip) (gdb) Gaps are ignored during reverse execution and replay. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * btrace.c (ftrace_find_call): Skip gaps. (ftrace_new_function): Initialize level. (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return) (ftrace_new_switch): Update level computation. (ftrace_new_gap): New. (ftrace_update_function): Create new function after gap. (btrace_compute_ftrace_bts): Create gap on error. (btrace_stitch_bts): Update parameters. Clear trace if it becomes empty. (btrace_stitch_trace): Update parameters. Update callers. (btrace_clear): Reset the number of gaps. (btrace_insn_get): Return NULL if the iterator points to a gap. (btrace_insn_number): Return zero if the iterator points to a gap. (btrace_insn_end): Allow gaps at the end. (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps. (btrace_find_insn_by_number): Assert that the found iterator does not point to a gap. (btrace_call_next, btrace_call_prev): Assert that the last function is not a gap. * btrace.h (btrace_bts_error): New. (btrace_function): Update comment. (btrace_function) <insn, insn_offset, number>: Update comment. (btrace_function) <errcode>: New. (btrace_thread_info) <ngaps>: New. (btrace_thread_info) <replay>: Update comment. (btrace_insn_get): Update comment. * record-btrace.c (btrace_ui_out_decode_error): New. (record_btrace_info): Print number of gaps. (btrace_insn_history, btrace_call_history): Call btrace_ui_out_decode_error for gaps. (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps. testsuite/ * gdb.btrace/buffer-size.exp: Update "info record" output. * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2014-01-30 09:51:10 +01:00
/* The number of gaps in the trace. */
unsigned int ngaps;
record-btrace: add (reverse-)stepping support Provide to_resume and to_wait target methods for the btrace record target to allow reverse stepping and replay support. Replay is limited in the sense that only stepping and source correlation are supported. We do not record data and thus can not show variables. Non-stop mode is not working. Do not allow record-btrace in non-stop mode. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (btrace_thread_flag): New. (struct btrace_thread_info) <flags>: New. * record-btrace.c (record_btrace_resume_thread) (record_btrace_find_thread_to_move, btrace_step_no_history) (btrace_step_stopped, record_btrace_start_replaying) (record_btrace_step_thread, record_btrace_decr_pc_after_break) (record_btrace_find_resume_thread): New. (record_btrace_resume, record_btrace_wait): Extend. (record_btrace_can_execute_reverse): New. (record_btrace_open): Fail in non-stop mode. (record_btrace_set_replay): Split into this, ... (record_btrace_stop_replaying): ... this, ... (record_btrace_clear_histories): ... and this. (init_record_btrace_ops): Init to_can_execute_reverse. * NEWS: Announce it. testsuite/ * gdb.btrace/delta.exp: Check reverse stepi. * gdb.btrace/tailcall.exp: Update. Add stepping tests. * gdb.btrace/finish.exp: New. * gdb.btrace/next.exp: New. * gdb.btrace/nexti.exp: New. * gdb.btrace/record_goto.c: Add comments. * gdb.btrace/step.exp: New. * gdb.btrace/stepi.exp: New. * gdb.btrace/multi-thread-step.c: New. * gdb.btrace/multi-thread-step.exp: New. * gdb.btrace/rn-dl-bind.c: New. * gdb.btrace/rn-dl-bind.exp: New. * gdb.btrace/data.c: New. * gdb.btrace/data.exp: New. * gdb.btrace/Makefile.in (EXECUTABLES): Add new. doc/ * gdb.texinfo: Document limited reverse/replay support for target record-btrace.
2013-05-06 16:04:46 +02:00
/* A bit-vector of btrace_thread_flag. */
Type-safe wrapper for enum flags This patch fixes C++ build errors like this: /home/pedro/gdb/mygit/cxx-convertion/src/gdb/linux-tdep.c:1126:35: error: invalid conversion from ‘int’ to ‘filterflags’ [-fpermissive] | COREFILTER_HUGETLB_PRIVATE); ^ This is a case of enums used as bit flags. Unlike "regular" enums, these values are supposed to be or'ed together. However, in C++, the type of "(ENUM1 | ENUM2)" is int, and you then can't assign an int to an enum variable without a cast. That means that this: enum foo_flags flags = 0; if (...) flags |= FOO_FLAG1; if (...) flags |= FOO_FLAG2; ... would have to be written as: enum foo_flags flags = (enum foo_flags) 0; if (...) flags = (enum foo_flags) (flags | FOO_FLAG1); if (...) flags = (enum foo_flags) (flags | FOO_FLAG2); which is ... ugly. Alternatively, we'd have to use an int for the variable's type, which isn't ideal either. This patch instead adds an "enum flags" class. "enum flags" are exactly the enums where the values are bits that are meant to be ORed together. This allows writing code like the below, while with raw enums this would fail to compile without casts to enum type at the assignments to 'f': enum some_flag { flag_val1 = 1 << 1, flag_val2 = 1 << 2, flag_val3 = 1 << 3, flag_val4 = 1 << 4, }; DEF_ENUM_FLAGS_TYPE(enum some_flag, some_flags) some_flags f = flag_val1 | flag_val2; f |= flag_val3; It's also possible to assign literal zero to an enum flags variable (meaning, no flags), dispensing either adding an awkward explicit "no value" value to the enumeration or the cast to assignments from 0. For example: some_flags f = 0; f |= flag_val3 | flag_val4; Note that literal integers other than zero do fail to compile: some_flags f = 1; // error C is still supported -- DEF_ENUM_FLAGS_TYPE is just a typedef in that case. gdb/ChangeLog: 2015-11-17 Pedro Alves <palves@redhat.com> * btrace.h: Include common/enum-flags.h. (btrace_insn_flags): Define. (struct btrace_insn) <flags>: Change type. (btrace_function_flags): Define. (struct btrace_function) <flags>: Change type. (btrace_thread_flags): Define. (struct btrace_thread_info) <flags>: Change type. * c-exp.y (token_flags): Rename to ... (token_flag): ... this. (token_flags): Define. (struct token) <flags>: Change type. * common/enum-flags.h: New file. * compile/compile-c-types.c (convert_qualified): Change type of 'quals' local. * compile/compile-internal.h: Include "common/enum-flags.h". (gcc_qualifiers_flags): Define. * completer.c (enum reg_completer_targets): Rename to ... (enum reg_completer_target): ... this. (reg_completer_targets): Define. (reg_or_group_completer_1): Change type of 'targets' parameter. * disasm.c (do_mixed_source_and_assembly_deprecated): Change type of 'psl_flags' local. (do_mixed_source_and_assembly): Change type of 'psl_flags' local. * infrun.c: Include "common/enum-flags.h". (enum step_over_what): Rename to ... (enum step_over_what_flag): ... this. (step_over_what): Change type. (start_step_over): Change type of 'step_what' local. (thread_still_needs_step_over): Now returns a step_over_what. Adjust. (keep_going_pass_signal): Change type of 'step_what' local. * linux-tdep.c: Include "common/enum-flags.h". (enum filterflags): Rename to ... (enum filter_flag): ... this. (filter_flags): Define. (dump_mapping_p): Change type of 'filterflags' parameter. (linux_find_memory_regions_full): Change type of 'filterflags' local. (linux_find_memory_regions_full): Pass the address of an unsigned int to sscanf instead of the address of an enum. * record-btrace.c (btrace_print_lines): Change type of local 'psl_flags'. (btrace_call_history): Replace 'flags' parameter with 'int_flags' parameter. Adjust. (record_btrace_call_history, record_btrace_call_history_range) (record_btrace_call_history_from): Rename 'flags' parameter to 'int_flags'. Use record_print_flags. * record.h: Include "common/enum-flags.h". (record_print_flags): Define. * source.c: Include "common/enum-flags.h". (print_source_lines_base, print_source_lines): Change type of flags parameter. * symtab.h: Include "common/enum-flags.h". (enum print_source_lines_flags): Rename to ... (enum print_source_lines_flag): ... this. (print_source_lines_flags): Define. (print_source_lines): Change prototype.
2015-11-17 14:31:29 +01:00
btrace_thread_flags flags;
record-btrace: add (reverse-)stepping support Provide to_resume and to_wait target methods for the btrace record target to allow reverse stepping and replay support. Replay is limited in the sense that only stepping and source correlation are supported. We do not record data and thus can not show variables. Non-stop mode is not working. Do not allow record-btrace in non-stop mode. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (btrace_thread_flag): New. (struct btrace_thread_info) <flags>: New. * record-btrace.c (record_btrace_resume_thread) (record_btrace_find_thread_to_move, btrace_step_no_history) (btrace_step_stopped, record_btrace_start_replaying) (record_btrace_step_thread, record_btrace_decr_pc_after_break) (record_btrace_find_resume_thread): New. (record_btrace_resume, record_btrace_wait): Extend. (record_btrace_can_execute_reverse): New. (record_btrace_open): Fail in non-stop mode. (record_btrace_set_replay): Split into this, ... (record_btrace_stop_replaying): ... this, ... (record_btrace_clear_histories): ... and this. (init_record_btrace_ops): Init to_can_execute_reverse. * NEWS: Announce it. testsuite/ * gdb.btrace/delta.exp: Check reverse stepi. * gdb.btrace/tailcall.exp: Update. Add stepping tests. * gdb.btrace/finish.exp: New. * gdb.btrace/next.exp: New. * gdb.btrace/nexti.exp: New. * gdb.btrace/record_goto.c: Add comments. * gdb.btrace/step.exp: New. * gdb.btrace/stepi.exp: New. * gdb.btrace/multi-thread-step.c: New. * gdb.btrace/multi-thread-step.exp: New. * gdb.btrace/rn-dl-bind.c: New. * gdb.btrace/rn-dl-bind.exp: New. * gdb.btrace/data.c: New. * gdb.btrace/data.exp: New. * gdb.btrace/Makefile.in (EXECUTABLES): Add new. doc/ * gdb.texinfo: Document limited reverse/replay support for target record-btrace.
2013-05-06 16:04:46 +02:00
/* The instruction history iterator. */
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
struct btrace_insn_history *insn_history;
/* The function call history iterator. */
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
struct btrace_call_history *call_history;
record-btrace: indicate gaps Indicate gaps in the trace due to decode errors. Internally, a gap is represented as a btrace function segment without instructions and with a non-zero format-specific error code. Show the gap when traversing the instruction or function call history. Also indicate gaps in "info record". It looks like this: (gdb) info record Active record target: record-btrace Recording format: Branch Trace Store. Buffer size: 64KB. Recorded 32 instructions in 5 functions (1 gaps) for thread 1 (process 7182). (gdb) record function-call-history /cli 1 fib inst 1,9 at src/fib.c:9,14 2 fib inst 10,20 at src/fib.c:6,14 3 [decode error (1): instruction overflow] 4 fib inst 21,28 at src/fib.c:11,14 5 fib inst 29,33 at src/fib.c:6,9 (gdb) record instruction-history 20,22 20 0x000000000040062f <fib+47>: sub $0x1,%rax [decode error (1): instruction overflow] 21 0x0000000000400613 <fib+19>: add $0x1,%rax 22 0x0000000000400617 <fib+23>: mov %rax,0x200a3a(%rip) (gdb) Gaps are ignored during reverse execution and replay. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * btrace.c (ftrace_find_call): Skip gaps. (ftrace_new_function): Initialize level. (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return) (ftrace_new_switch): Update level computation. (ftrace_new_gap): New. (ftrace_update_function): Create new function after gap. (btrace_compute_ftrace_bts): Create gap on error. (btrace_stitch_bts): Update parameters. Clear trace if it becomes empty. (btrace_stitch_trace): Update parameters. Update callers. (btrace_clear): Reset the number of gaps. (btrace_insn_get): Return NULL if the iterator points to a gap. (btrace_insn_number): Return zero if the iterator points to a gap. (btrace_insn_end): Allow gaps at the end. (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps. (btrace_find_insn_by_number): Assert that the found iterator does not point to a gap. (btrace_call_next, btrace_call_prev): Assert that the last function is not a gap. * btrace.h (btrace_bts_error): New. (btrace_function): Update comment. (btrace_function) <insn, insn_offset, number>: Update comment. (btrace_function) <errcode>: New. (btrace_thread_info) <ngaps>: New. (btrace_thread_info) <replay>: Update comment. (btrace_insn_get): Update comment. * record-btrace.c (btrace_ui_out_decode_error): New. (record_btrace_info): Print number of gaps. (btrace_insn_history, btrace_call_history): Call btrace_ui_out_decode_error for gaps. (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps. testsuite/ * gdb.btrace/buffer-size.exp: Update "info record" output. * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2014-01-30 09:51:10 +01:00
/* The current replay position. NULL if not replaying.
Gaps are skipped during replay, so REPLAY always points to a valid
instruction. */
struct btrace_insn_iterator *replay;
record-full/record-btrace: software/hardware breakpoint trap This adjusts the record targets to tell the core whether a trap was caused by a breakpoint. Targets that can do this should report breakpoint traps with the PC already adjusted, so this removes the re-incrementing record-full was doing. These targets need to be adjusted before process_stratum targets beneath are, otherwise target_supports_stopped_by_sw_breakpoint, etc. would fall through to the target beneath while recording/replaying, and the core would get confused. Tested on x86-64 Fedora 20, native and gdbserver. gdb/ChangeLog: 2015-03-04 Pedro Alves <palves@redhat.com> * btrace.h: Include target/waitstatus.h. (struct btrace_thread_info) <stop_reason>: New field. * record-btrace.c (record_btrace_step_thread): Use record_check_stopped_by_breakpoint instead of breakpoint_here_p. (record_btrace_decr_pc_after_break): Delete. (record_btrace_stopped_by_sw_breakpoint) (record_btrace_supports_stopped_by_sw_breakpoint) (record_btrace_stopped_by_hw_breakpoint) (record_btrace_supports_stopped_by_hw_breakpoint): New functions. (init_record_btrace_ops): Install them. * record-full.c (record_full_hw_watchpoint): Delete and replace with ... (record_full_stop_reason): ... this throughout. (record_full_exec_insn): Adjust. (record_full_wait_1): Adjust. No longer re-increment the PC. (record_full_wait_1): Adjust. Use record_check_stopped_by_breakpoint instead of breakpoint_here_p. (record_full_stopped_by_watchpoint): Adjust. (record_full_stopped_by_sw_breakpoint) (record_full_supports_stopped_by_sw_breakpoint) (record_full_supports_stopped_by_sw_breakpoint) (record_full_stopped_by_hw_breakpoint) (record_full_supports_stopped_by_hw_breakpoint): New functions. (init_record_full_ops, init_record_full_core_ops): Install them. * record.c (record_check_stopped_by_breakpoint): New function. * record.h: Include target/waitstatus.h. (record_check_stopped_by_breakpoint): New declaration.
2015-03-04 21:41:15 +01:00
/* Why the thread stopped, if we need to track it. */
enum target_stop_reason stop_reason;
btrace: maintenance commands Add maintenance commands that help debugging the btrace record target. The following new commands are added: maint info btrace Print information about branch tracing internals. maint btrace packet-history Print the raw branch tracing data. maint btrace clear-packet-history Discard the stored raw branch tracing data. maint btrace clear Discard all branch tracing data. It will be fetched and processed anew by the next "record" command. maint set|show btrace pt skip-pad Set and show whether PAD packets are skipped when computing the packet history. gdb/ * btrace.c: Include gdbcmd.h, cli/cli-utils.h, and ctype.h. (maint_btrace_cmdlist, maint_btrace_set_cmdlist) (maint_btrace_show_cmdlist, maint_btrace_pt_set_cmdlist) (maint_btrace_pt_show_cmdlist, maint_btrace_pt_skip_pad) (btrace_maint_clear): New. (btrace_fetch, btrace_clear): Call btrace_maint_clear. (pt_print_packet, btrace_maint_decode_pt) (btrace_maint_update_pt_packets, btrace_maint_update_packets) (btrace_maint_print_packets, get_uint, get_context_size, no_chunk) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd, maint_btrace_clear_cmd) (maint_btrace_cmd, maint_btrace_set_cmd, maint_btrace_show_cmd) (maint_btrace_pt_set_cmd, maint_btrace_pt_show_cmd) (maint_info_btrace_cmd, _initialize_btrace): New. * btrace.h (btrace_pt_packet, btrace_pt_packet_s) (btrace_maint_packet_history, btrace_maint_info): New. (btrace_thread_info) <maint>: New. * NEWS: Announce it. doc/ * gdb.texinfo (Maintenance Commands): Document "maint btrace" commands.
2014-02-03 14:35:28 +01:00
/* Maintenance information. */
struct btrace_maint_info maint;
};
/* Enable branch tracing for a thread. */
record btrace: add configuration struct Add a struct to describe the branch trace configuration and use it for enabling branch tracing. The user will be able to set configuration fields for each tracing format to be used for new threads. The actual configuration that is active for a given thread will be shown in the "info record" command. At the moment, the configuration struct only contains a format field that is set to the only available format. The format is the only configuration option that can not be set via set commands. It is given as argument to the "record btrace" command when starting recording. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * Makefile.in (XMLFILES): Add btrace-conf.dtd. * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters. (x86_linux_btrace_conf): New. (x86_linux_create_target): Initialize to_btrace_conf. * nat/linux-btrace.c (linux_enable_btrace): Update parameters. Check format. Split into this and ... (linux_enable_bts): ... this. (linux_btrace_conf): New. (perf_event_skip_record): Renamed into ... (perf_event_skip_bts_record): ... this. Updated users. (linux_disable_btrace): Split into this and ... (linux_disable_bts): ... this. (linux_read_btrace): Check format. * nat/linux-btrace.h (linux_enable_btrace): Update parameters. (linux_btrace_conf): New. (btrace_target_info)<ptid>: Moved. (btrace_target_info)<conf>: New. (btrace_target_info): Split into this and ... (btrace_tinfo_bts): ... this. Updated users. * btrace.c (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf) (btrace_conf_children, btrace_conf_attributes) (btrace_conf_elements): New. * btrace.h (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf): New. * common/btrace-common.h (btrace_config): New. * feature/btrace-conf.dtd: New. * record-btrace.c (record_btrace_conf): New. (record_btrace_cmdlist): New. (record_btrace_enable_warn, record_btrace_open): Pass &record_btrace_conf. (record_btrace_info): Print recording format. (cmd_record_btrace_bts_start): New. (cmd_record_btrace_start): Call cmd_record_btrace_bts_start. (_initialize_record_btrace): Add "record btrace bts" subcommand. Add "record bts" alias command. * remote.c (remote_state)<btrace_config>: New. (remote_btrace_reset, PACKET_qXfer_btrace_conf): New. (remote_protocol_features): Add qXfer:btrace-conf:read. (remote_open_1): Call remote_btrace_reset. (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF. (btrace_target_info)<conf>: New. (btrace_sync_conf, btrace_read_config): New. (remote_enable_btrace): Update parameters. Call btrace_sync_conf and btrace_read_conf. (remote_btrace_conf): New. (init_remote_ops): Initialize to_btrace_conf. (_initialize_remote): Add qXfer:btrace-conf packet. * target.c (target_enable_btrace): Update parameters. (target_btrace_conf): New. * target.h (target_enable_btrace): Update parameters. (target_btrace_conf): New. (target_object)<TARGET_OBJECT_BTRACE_CONF>: New. (target_ops)<to_enable_btrace>: Update parameters and comment. (target_ops)<to_btrace_conf>: New. * target-delegates: Regenerate. * target-debug.h (target_debug_print_const_struct_btrace_config_p) (target_debug_print_const_struct_btrace_target_info_p): New. NEWS: Announce new command and new packet. doc/ * gdb.texinfo (Process Record and Replay): Describe the "record btrace bts" command. (General Query Packets): Describe qXfer:btrace-conf:read packet. (Branch Trace Configuration Format): New. gdbserver/ * linux-low.c (linux_low_enable_btrace): Update parameters. (linux_low_btrace_conf): New. (linux_target_ops)<to_btrace_conf>: Initialize. * server.c (current_btrace_conf): New. (handle_btrace_enable): Rename to ... (handle_btrace_enable_bts): ... this. Pass &current_btrace_conf to target_enable_btrace. Update comment. Update users. (handle_qxfer_btrace_conf): New. (qxfer_packets): Add btrace-conf entry. (handle_query): Report qXfer:btrace-conf:read as supported packet. * target.h (target_ops)<enable_btrace>: Update parameters and comment. (target_ops)<read_btrace_conf>: New. (target_enable_btrace): Update parameters. (target_read_btrace_conf): New. testsuite/ * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2013-11-28 15:44:13 +01:00
extern void btrace_enable (struct thread_info *tp,
const struct btrace_config *conf);
/* Get the branch trace configuration for a thread.
Return NULL if branch tracing is not enabled for that thread. */
extern const struct btrace_config *
btrace_conf (const struct btrace_thread_info *);
/* Disable branch tracing for a thread.
This will also delete the current branch trace data. */
extern void btrace_disable (struct thread_info *);
/* Disable branch tracing for a thread during teardown.
This is similar to btrace_disable, except that it will use
target_teardown_btrace instead of target_disable_btrace. */
extern void btrace_teardown (struct thread_info *);
/* Fetch the branch trace for a single thread. */
extern void btrace_fetch (struct thread_info *);
/* Clear the branch trace for a single thread. */
extern void btrace_clear (struct thread_info *);
/* Clear the branch trace for all threads when an object file goes away. */
extern void btrace_free_objfile (struct objfile *);
btrace: add struct btrace_data Add a structure to hold the branch trace data and an enum to describe the format of that data. So far, only BTS is supported. Also added a NONE format to indicate that no branch trace data is available. This will make it easier to support different branch trace formats in the future. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * Makefile.in (SFILES): Add common/btrace-common.c. (COMMON_OBS): Add common/btrace-common.o. (btrace-common.o): Add build rules. * btrace.c (parse_xml_btrace): Update parameters. (parse_xml_btrace_block): Set format field. (btrace_add_pc, btrace_fetch): Use struct btrace_data. (do_btrace_data_cleanup, make_cleanup_btrace_data): New. (btrace_compute_ftrace): Split into this and... (btrace_compute_ftrace_bts): ...this. (btrace_stitch_trace): Split into this and... (btrace_stitch_bts): ...this. * btrace.h (parse_xml_btrace): Update parameters. (make_cleanup_btrace_data): New. * common/btrace-common.c: New. * common/btrace-common.h: Include common-defs.h. (btrace_block_s): Update comment. (btrace_format): New. (btrace_format_string): New. (btrace_data_bts): New. (btrace_data): New. (btrace_data_init, btrace_data_fini, btrace_data_empty): New. * remote.c (remote_read_btrace): Update parameters. * target.c (target_read_btrace): Update parameters. * target.h (target_read_btrace): Update parameters. (target_ops)<to_read_btrace>: Update parameters. * x86-linux-nat.c (x86_linux_read_btrace): Update parameters. * target-delegates.c: Regenerate. * target-debug (target_debug_print_struct_btrace_data_p): New. * nat/linux-btrace.c (linux_read_btrace): Split into this and... (linux_read_bts): ...this. * nat/linux-btrace.h (linux_read_btrace): Update parameters. gdbserver/ * Makefile.in (SFILES): Add common/btrace-common.c. (OBS): Add common/btrace-common.o. (btrace-common.o): Add build rules. * linux-low: Include btrace-common.h. (linux_low_read_btrace): Use struct btrace_data. Call btrace_data_init and btrace_data_fini.
2013-11-13 15:31:07 +01:00
/* Parse a branch trace xml document XML into DATA. */
extern void parse_xml_btrace (struct btrace_data *data, const char *xml);
record btrace: add configuration struct Add a struct to describe the branch trace configuration and use it for enabling branch tracing. The user will be able to set configuration fields for each tracing format to be used for new threads. The actual configuration that is active for a given thread will be shown in the "info record" command. At the moment, the configuration struct only contains a format field that is set to the only available format. The format is the only configuration option that can not be set via set commands. It is given as argument to the "record btrace" command when starting recording. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * Makefile.in (XMLFILES): Add btrace-conf.dtd. * x86-linux-nat.c (x86_linux_enable_btrace): Update parameters. (x86_linux_btrace_conf): New. (x86_linux_create_target): Initialize to_btrace_conf. * nat/linux-btrace.c (linux_enable_btrace): Update parameters. Check format. Split into this and ... (linux_enable_bts): ... this. (linux_btrace_conf): New. (perf_event_skip_record): Renamed into ... (perf_event_skip_bts_record): ... this. Updated users. (linux_disable_btrace): Split into this and ... (linux_disable_bts): ... this. (linux_read_btrace): Check format. * nat/linux-btrace.h (linux_enable_btrace): Update parameters. (linux_btrace_conf): New. (btrace_target_info)<ptid>: Moved. (btrace_target_info)<conf>: New. (btrace_target_info): Split into this and ... (btrace_tinfo_bts): ... this. Updated users. * btrace.c (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf) (btrace_conf_children, btrace_conf_attributes) (btrace_conf_elements): New. * btrace.h (btrace_enable): Update parameters. (btrace_conf, parse_xml_btrace_conf): New. * common/btrace-common.h (btrace_config): New. * feature/btrace-conf.dtd: New. * record-btrace.c (record_btrace_conf): New. (record_btrace_cmdlist): New. (record_btrace_enable_warn, record_btrace_open): Pass &record_btrace_conf. (record_btrace_info): Print recording format. (cmd_record_btrace_bts_start): New. (cmd_record_btrace_start): Call cmd_record_btrace_bts_start. (_initialize_record_btrace): Add "record btrace bts" subcommand. Add "record bts" alias command. * remote.c (remote_state)<btrace_config>: New. (remote_btrace_reset, PACKET_qXfer_btrace_conf): New. (remote_protocol_features): Add qXfer:btrace-conf:read. (remote_open_1): Call remote_btrace_reset. (remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF. (btrace_target_info)<conf>: New. (btrace_sync_conf, btrace_read_config): New. (remote_enable_btrace): Update parameters. Call btrace_sync_conf and btrace_read_conf. (remote_btrace_conf): New. (init_remote_ops): Initialize to_btrace_conf. (_initialize_remote): Add qXfer:btrace-conf packet. * target.c (target_enable_btrace): Update parameters. (target_btrace_conf): New. * target.h (target_enable_btrace): Update parameters. (target_btrace_conf): New. (target_object)<TARGET_OBJECT_BTRACE_CONF>: New. (target_ops)<to_enable_btrace>: Update parameters and comment. (target_ops)<to_btrace_conf>: New. * target-delegates: Regenerate. * target-debug.h (target_debug_print_const_struct_btrace_config_p) (target_debug_print_const_struct_btrace_target_info_p): New. NEWS: Announce new command and new packet. doc/ * gdb.texinfo (Process Record and Replay): Describe the "record btrace bts" command. (General Query Packets): Describe qXfer:btrace-conf:read packet. (Branch Trace Configuration Format): New. gdbserver/ * linux-low.c (linux_low_enable_btrace): Update parameters. (linux_low_btrace_conf): New. (linux_target_ops)<to_btrace_conf>: Initialize. * server.c (current_btrace_conf): New. (handle_btrace_enable): Rename to ... (handle_btrace_enable_bts): ... this. Pass &current_btrace_conf to target_enable_btrace. Update comment. Update users. (handle_qxfer_btrace_conf): New. (qxfer_packets): Add btrace-conf entry. (handle_query): Report qXfer:btrace-conf:read as supported packet. * target.h (target_ops)<enable_btrace>: Update parameters and comment. (target_ops)<read_btrace_conf>: New. (target_enable_btrace): Update parameters. (target_read_btrace_conf): New. testsuite/ * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2013-11-28 15:44:13 +01:00
/* Parse a branch trace configuration xml document XML into CONF. */
extern void parse_xml_btrace_conf (struct btrace_config *conf, const char *xml);
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
/* Dereference a branch trace instruction iterator. Return a pointer to the
record-btrace: indicate gaps Indicate gaps in the trace due to decode errors. Internally, a gap is represented as a btrace function segment without instructions and with a non-zero format-specific error code. Show the gap when traversing the instruction or function call history. Also indicate gaps in "info record". It looks like this: (gdb) info record Active record target: record-btrace Recording format: Branch Trace Store. Buffer size: 64KB. Recorded 32 instructions in 5 functions (1 gaps) for thread 1 (process 7182). (gdb) record function-call-history /cli 1 fib inst 1,9 at src/fib.c:9,14 2 fib inst 10,20 at src/fib.c:6,14 3 [decode error (1): instruction overflow] 4 fib inst 21,28 at src/fib.c:11,14 5 fib inst 29,33 at src/fib.c:6,9 (gdb) record instruction-history 20,22 20 0x000000000040062f <fib+47>: sub $0x1,%rax [decode error (1): instruction overflow] 21 0x0000000000400613 <fib+19>: add $0x1,%rax 22 0x0000000000400617 <fib+23>: mov %rax,0x200a3a(%rip) (gdb) Gaps are ignored during reverse execution and replay. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * btrace.c (ftrace_find_call): Skip gaps. (ftrace_new_function): Initialize level. (ftrace_new_call, ftrace_new_tailcall, ftrace_new_return) (ftrace_new_switch): Update level computation. (ftrace_new_gap): New. (ftrace_update_function): Create new function after gap. (btrace_compute_ftrace_bts): Create gap on error. (btrace_stitch_bts): Update parameters. Clear trace if it becomes empty. (btrace_stitch_trace): Update parameters. Update callers. (btrace_clear): Reset the number of gaps. (btrace_insn_get): Return NULL if the iterator points to a gap. (btrace_insn_number): Return zero if the iterator points to a gap. (btrace_insn_end): Allow gaps at the end. (btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps. (btrace_find_insn_by_number): Assert that the found iterator does not point to a gap. (btrace_call_next, btrace_call_prev): Assert that the last function is not a gap. * btrace.h (btrace_bts_error): New. (btrace_function): Update comment. (btrace_function) <insn, insn_offset, number>: Update comment. (btrace_function) <errcode>: New. (btrace_thread_info) <ngaps>: New. (btrace_thread_info) <replay>: Update comment. (btrace_insn_get): Update comment. * record-btrace.c (btrace_ui_out_decode_error): New. (record_btrace_info): Print number of gaps. (btrace_insn_history, btrace_call_history): Call btrace_ui_out_decode_error for gaps. (record_btrace_step_thread, record_btrace_start_replaying): Skip gaps. testsuite/ * gdb.btrace/buffer-size.exp: Update "info record" output. * gdb.btrace/delta.exp: Update "info record" output. * gdb.btrace/enable.exp: Update "info record" output. * gdb.btrace/finish.exp: Update "info record" output. * gdb.btrace/instruction_history.exp: Update "info record" output. * gdb.btrace/next.exp: Update "info record" output. * gdb.btrace/nexti.exp: Update "info record" output. * gdb.btrace/step.exp: Update "info record" output. * gdb.btrace/stepi.exp: Update "info record" output. * gdb.btrace/nohist.exp: Update "info record" output.
2014-01-30 09:51:10 +01:00
instruction the iterator points to.
May return NULL if the iterator points to a gap in the trace. */
btrace: change branch trace data structure The branch trace is represented as 3 vectors: - a block vector - a instruction vector - a function vector Each vector (except for the first) is computed from the one above. Change this into a graph where a node represents a sequence of instructions belonging to the same function and where we have three types of edges to connect the function segments: - control flow - same function (instance) - call stack This allows us to navigate in the branch trace. We will need this for "record goto" and reverse execution. This patch introduces the data structure and computes the control flow edges. It also introduces iterator structs to simplify iterating over the branch trace in control-flow order. It also fixes PR gdb/15240 since now recursive calls are handled correctly. Fix the test that got the number of expected fib instances and also the function numbers wrong. The current instruction had been part of the branch trace. This will look odd once we start support for reverse execution. Remove it. We still keep it in the trace itself to allow extending the branch trace more easily in the future. 2014-01-16 Markus Metzger <markus.t.metzger@intel.com> * btrace.h (struct btrace_func_link): New. (enum btrace_function_flag): New. (struct btrace_inst): Rename to ... (struct btrace_insn): ...this. Update all users. (struct btrace_func) <ibegin, iend>: Remove. (struct btrace_func_link): New. (struct btrace_func): Rename to ... (struct btrace_function): ...this. Update all users. (struct btrace_function) <segment, flow, up, insn, insn_offset) (number, level, flags>: New. (struct btrace_insn_iterator): Rename to ... (struct btrace_insn_history): ...this. Update all users. (struct btrace_insn_iterator, btrace_call_iterator): New. (struct btrace_target_info) <btrace, itrace, ftrace>: Remove. (struct btrace_target_info) <begin, end, level> <insn_history, call_history>: New. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * btrace.c (btrace_init_insn_iterator) (btrace_init_func_iterator, compute_itrace): Remove. (ftrace_print_function_name, ftrace_print_filename) (ftrace_skip_file): Change parameter to const. (ftrace_init_func): Remove. (ftrace_debug): Use new btrace_function fields. (ftrace_function_switched): Also consider gaining and losing symbol information). (ftrace_print_insn_addr, ftrace_new_call, ftrace_new_return) (ftrace_new_switch, ftrace_find_caller, ftrace_new_function) (ftrace_update_caller, ftrace_fixup_caller, ftrace_new_tailcall): New. (ftrace_new_function): Move. Remove debug print. (ftrace_update_lines, ftrace_update_insns): New. (ftrace_update_function): Check for call, ret, and jump. (compute_ftrace): Renamed to ... (btrace_compute_ftrace): ...this. Rewritten to compute call stack. (btrace_fetch, btrace_clear): Updated. (btrace_insn_get, btrace_insn_number, btrace_insn_begin) (btrace_insn_end, btrace_insn_prev, btrace_insn_next) (btrace_insn_cmp, btrace_find_insn_by_number, btrace_call_get) (btrace_call_number, btrace_call_begin, btrace_call_end) (btrace_call_prev, btrace_call_next, btrace_call_cmp) (btrace_find_function_by_number, btrace_set_insn_history) (btrace_set_call_history): New. * record-btrace.c (require_btrace): Use new btrace thread info fields. (record_btrace_info, btrace_insn_history) (record_btrace_insn_history, record_btrace_insn_history_range): Use new btrace thread info fields and new iterator. (btrace_func_history_src_line): Rename to ... (btrace_call_history_src_line): ...this. Use new btrace thread info fields. (btrace_func_history): Rename to ... (btrace_call_history): ...this. Use new btrace thread info fields and new iterator. (record_btrace_call_history, record_btrace_call_history_range): Use new btrace thread info fields and new iterator. testsuite/ * gdb.btrace/function_call_history.exp: Fix expected function trace. * gdb.btrace/instruction_history.exp: Initialize traced. Remove traced_functions.
2013-03-22 14:32:47 +01:00
extern const struct btrace_insn *
btrace_insn_get (const struct btrace_insn_iterator *);
/* Return the instruction number for a branch trace iterator.
Returns one past the maximum instruction number for the end iterator.
Returns zero if the iterator does not point to a valid instruction. */
extern unsigned int btrace_insn_number (const struct btrace_insn_iterator *);
/* Initialize a branch trace instruction iterator to point to the begin/end of
the branch trace. Throws an error if there is no branch trace. */
extern void btrace_insn_begin (struct btrace_insn_iterator *,
const struct btrace_thread_info *);
extern void btrace_insn_end (struct btrace_insn_iterator *,
const struct btrace_thread_info *);
/* Increment/decrement a branch trace instruction iterator by at most STRIDE
instructions. Return the number of instructions by which the instruction
iterator has been advanced.
Returns zero, if the operation failed or STRIDE had been zero. */
extern unsigned int btrace_insn_next (struct btrace_insn_iterator *,
unsigned int stride);
extern unsigned int btrace_insn_prev (struct btrace_insn_iterator *,
unsigned int stride);
/* Compare two branch trace instruction iterators.
Return a negative number if LHS < RHS.
Return zero if LHS == RHS.
Return a positive number if LHS > RHS. */
extern int btrace_insn_cmp (const struct btrace_insn_iterator *lhs,
const struct btrace_insn_iterator *rhs);
/* Find an instruction in the function branch trace by its number.
If the instruction is found, initialize the branch trace instruction
iterator to point to this instruction and return non-zero.
Return zero otherwise. */
extern int btrace_find_insn_by_number (struct btrace_insn_iterator *,
const struct btrace_thread_info *,
unsigned int number);
/* Dereference a branch trace call iterator. Return a pointer to the
function the iterator points to or NULL if the interator points past
the end of the branch trace. */
extern const struct btrace_function *
btrace_call_get (const struct btrace_call_iterator *);
/* Return the function number for a branch trace call iterator.
Returns one past the maximum function number for the end iterator.
Returns zero if the iterator does not point to a valid function. */
extern unsigned int btrace_call_number (const struct btrace_call_iterator *);
/* Initialize a branch trace call iterator to point to the begin/end of
the branch trace. Throws an error if there is no branch trace. */
extern void btrace_call_begin (struct btrace_call_iterator *,
const struct btrace_thread_info *);
extern void btrace_call_end (struct btrace_call_iterator *,
const struct btrace_thread_info *);
/* Increment/decrement a branch trace call iterator by at most STRIDE function
segments. Return the number of function segments by which the call
iterator has been advanced.
Returns zero, if the operation failed or STRIDE had been zero. */
extern unsigned int btrace_call_next (struct btrace_call_iterator *,
unsigned int stride);
extern unsigned int btrace_call_prev (struct btrace_call_iterator *,
unsigned int stride);
/* Compare two branch trace call iterators.
Return a negative number if LHS < RHS.
Return zero if LHS == RHS.
Return a positive number if LHS > RHS. */
extern int btrace_call_cmp (const struct btrace_call_iterator *lhs,
const struct btrace_call_iterator *rhs);
/* Find a function in the function branch trace by its NUMBER.
If the function is found, initialize the branch trace call
iterator to point to this function and return non-zero.
Return zero otherwise. */
extern int btrace_find_call_by_number (struct btrace_call_iterator *,
const struct btrace_thread_info *,
unsigned int number);
/* Set the branch trace instruction history from BEGIN (inclusive) to
END (exclusive). */
extern void btrace_set_insn_history (struct btrace_thread_info *,
const struct btrace_insn_iterator *begin,
const struct btrace_insn_iterator *end);
/* Set the branch trace function call history from BEGIN (inclusive) to
END (exclusive). */
extern void btrace_set_call_history (struct btrace_thread_info *,
const struct btrace_call_iterator *begin,
const struct btrace_call_iterator *end);
/* Determine if branch tracing is currently replaying TP. */
extern int btrace_is_replaying (struct thread_info *tp);
/* Return non-zero if the branch trace for TP is empty; zero otherwise. */
extern int btrace_is_empty (struct thread_info *tp);
btrace: add struct btrace_data Add a structure to hold the branch trace data and an enum to describe the format of that data. So far, only BTS is supported. Also added a NONE format to indicate that no branch trace data is available. This will make it easier to support different branch trace formats in the future. 2015-02-09 Markus Metzger <markus.t.metzger@intel.com> * Makefile.in (SFILES): Add common/btrace-common.c. (COMMON_OBS): Add common/btrace-common.o. (btrace-common.o): Add build rules. * btrace.c (parse_xml_btrace): Update parameters. (parse_xml_btrace_block): Set format field. (btrace_add_pc, btrace_fetch): Use struct btrace_data. (do_btrace_data_cleanup, make_cleanup_btrace_data): New. (btrace_compute_ftrace): Split into this and... (btrace_compute_ftrace_bts): ...this. (btrace_stitch_trace): Split into this and... (btrace_stitch_bts): ...this. * btrace.h (parse_xml_btrace): Update parameters. (make_cleanup_btrace_data): New. * common/btrace-common.c: New. * common/btrace-common.h: Include common-defs.h. (btrace_block_s): Update comment. (btrace_format): New. (btrace_format_string): New. (btrace_data_bts): New. (btrace_data): New. (btrace_data_init, btrace_data_fini, btrace_data_empty): New. * remote.c (remote_read_btrace): Update parameters. * target.c (target_read_btrace): Update parameters. * target.h (target_read_btrace): Update parameters. (target_ops)<to_read_btrace>: Update parameters. * x86-linux-nat.c (x86_linux_read_btrace): Update parameters. * target-delegates.c: Regenerate. * target-debug (target_debug_print_struct_btrace_data_p): New. * nat/linux-btrace.c (linux_read_btrace): Split into this and... (linux_read_bts): ...this. * nat/linux-btrace.h (linux_read_btrace): Update parameters. gdbserver/ * Makefile.in (SFILES): Add common/btrace-common.c. (OBS): Add common/btrace-common.o. (btrace-common.o): Add build rules. * linux-low: Include btrace-common.h. (linux_low_read_btrace): Use struct btrace_data. Call btrace_data_init and btrace_data_fini.
2013-11-13 15:31:07 +01:00
/* Create a cleanup for DATA. */
extern struct cleanup *make_cleanup_btrace_data (struct btrace_data *data);
#endif /* BTRACE_H */