binutils-gdb/gdb/infrun.h

238 lines
8.5 KiB
C
Raw Normal View History

/* Copyright (C) 1986-2016 Free Software Foundation, Inc.
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 13:29:11 +02:00
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#ifndef INFRUN_H
#define INFRUN_H 1
#include "symtab.h"
struct target_waitstatus;
struct frame_info;
struct address_space;
Replace "struct continuation" mechanism by something more extensible This adds an object oriented replacement for the "struct continuation" mechanism, and converts the stepping commands (step, next, stepi, nexti) and the "finish" commands to use it. It adds a new thread "class" (struct thread_fsm) that contains the necessary info and callbacks to manage the state machine of a thread's execution command. This allows getting rid of some hacks. E.g., in fetch_inferior_event and normal_stop we no longer need to know whether a thread is doing a multi-step (e.g., step N). This effectively makes the intermediate_continuations unused -- they'll be garbage collected in a separate patch. (They were never a proper abstraction, IMO. See how fetch_inferior_event needs to check step_multi before knowing whether to call INF_EXEC_CONTINUE or INF_EXEC_COMPLETE.) The target async vs !async uiout hacks in mi_on_normal_stop go away too. print_stop_event is no longer called from normal_stop. Instead it is now called from within each interpreter's normal_stop observer. This clears the path to make each interpreter print a stop event the way it sees fit. Currently we have some hacks in common code to differenciate CLI vs TUI vs MI around this area. The "finish" command's FSM class stores the return value plus that value's position in the value history, so that those can be printed to both MI and CLI's streams. This fixes the CLI "finish" command when run from MI -- it now also includes the function's return value in the CLI stream: (gdb) ~"callee3 (strarg=0x400730 \"A string argument.\") at src/gdb/testsuite/gdb.mi/basics.c:35\n" ~"35\t}\n" +~"Value returned is $1 = 0\n" *stopped,reason="function-finished",frame=...,gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0" -FAIL: gdb.mi/mi-cli.exp: CLI finish: check CLI output +PASS: gdb.mi/mi-cli.exp: CLI finish: check CLI output gdb/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_OBS): Add thread-fsm.o. * breakpoint.c (handle_jit_event): Print debug output. (bpstat_what): Split event callback handling to ... (bpstat_run_callbacks): ... this new function. (momentary_bkpt_print_it): No longer handle bp_finish here. * breakpoint.h (bpstat_run_callbacks): Declare. * gdbthread.h (struct thread_info) <step_multi>: Delete field. <thread_fsm>: New field. (thread_cancel_execution_command): Declare. * infcmd.c: Include thread-fsm.h. (struct step_command_fsm): New. (step_command_fsm_ops): New global. (new_step_command_fsm, step_command_fsm_prepare): New functions. (step_1): Adjust to use step_command_fsm_prepare and prepare_one_step. (struct step_1_continuation_args): Delete. (step_1_continuation): Delete. (step_command_fsm_should_stop): New function. (step_once): Delete. (step_command_fsm_clean_up, step_command_fsm_async_reply_reason) (prepare_one_step): New function, based on step_once. (until_next_command): Remove step_multi reference. (struct return_value_info): New. (print_return_value): Rename to ... (print_return_value_1): ... this. New struct return_value_info parameter. Adjust. (print_return_value): Reimplement as wrapper around print_return_value_1. (struct finish_command_fsm): New. (finish_command_continuation): Delete. (finish_command_fsm_ops): New global. (new_finish_command_fsm, finish_command_fsm_should_stop): New functions. (finish_command_fsm_clean_up, finish_command_fsm_return_value): New. (finish_command_continuation_free_arg): Delete. (finish_command_fsm_async_reply_reason): New. (finish_backward, finish_forward): Change symbol parameter to a finish_command_fsm. Adjust. (finish_command): Create a finish_command_fsm. Adjust. * infrun.c: Include "thread-fsm.h". (clear_proceed_status_thread): Delete the thread's FSM. (infrun_thread_stop_requested_callback): Cancel the thread's execution command. (clean_up_just_stopped_threads_fsms): New function. (fetch_inferior_event): Handle the event_thread's should_stop method saying the command isn't done yet. (process_event_stop_test): Run breakpoint callbacks here. (print_stop_event): Rename to ... (print_stop_location): ... this. (restore_current_uiout_cleanup): New function. (print_stop_event): Reimplement. (normal_stop): No longer notify the end_stepping_range observers here handle "step N" nor "finish" here. No longer call print_stop_event here. * infrun.h (struct return_value_info): Forward declare. (print_return_value): Declare. (print_stop_event): Change prototype. * thread-fsm.c: New file. * thread-fsm.h: New file. * thread.c: Include "thread-fsm.h". (thread_cancel_execution_command): New function. (clear_thread_inferior_resources): Call it. * cli/cli-interp.c (cli_on_normal_stop): New function. (cli_interpreter_init): Install cli_on_normal_stop as normal_stop observer. * mi/mi-interp.c: Include "thread-fsm.h". (restore_current_uiout_cleanup): Delete. (mi_on_normal_stop): If the thread has an FSM associated, and it finished, ask it for the async-reply-reason to print. Always call print_stop_event here, regardless of the top-level interpreter. Check bpstat_what to tell whether an asynchronous breakpoint hit triggered. * tui/tui-interp.c (tui_on_normal_stop): New function. (tui_init): Install tui_on_normal_stop as normal_stop observer. gdb/testsuite/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * gdb.mi/mi-cli.exp: Add CLI finish tests.
2015-09-09 19:23:24 +02:00
struct return_value_info;
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 13:29:11 +02:00
/* True if we are debugging run control. */
extern unsigned int debug_infrun;
/* True if we are debugging displaced stepping. */
extern int debug_displaced;
/* Nonzero if we want to give control to the user when we're notified
of shared library events by the dynamic linker. */
extern int stop_on_solib_events;
/* Are we simulating synchronous execution? This is used in async gdb
to implement the 'run', 'continue' etc commands, which will not
redisplay the prompt until the execution is actually over. */
extern int sync_execution;
/* True if execution commands resume all threads of all processes by
default; otherwise, resume only threads of the current inferior
process. */
extern int sched_multi;
/* When set, stop the 'step' command if we enter a function which has
no line number information. The normal behavior is that we step
over such function. */
extern int step_stop_if_no_debug;
/* If set, the inferior should be controlled in non-stop mode. In
this mode, each thread is controlled independently. Execution
commands apply only to the selected thread by default, and stop
events stop only the thread that had the event -- the other threads
are kept running freely. */
extern int non_stop;
/* When set (default), the target should attempt to disable the
operating system's address space randomization feature when
starting an inferior. */
extern int disable_randomization;
Bail out of processing stop if hook-stop resumes target / changes context This patch, relative to a tree with https://sourceware.org/ml/gdb-patches/2015-08/msg00295.html, fixes issues/crashes that trigger if something unexpected happens during a hook-stop. E.g., if the inferior disappears while running the hook-stop, we hit failed assertions: (gdb) define hook-stop Type commands for definition of "hook-stop". End with a line saying just "end". >kill >end (gdb) si Kill the program being debugged? (y or n) [answered Y; input not from terminal] /home/pedro/gdb/mygit/build/../src/gdb/thread.c:88: internal-error: inferior_thread: Assertion `tp' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. Quit this debugging session? (y or n) I noticed that if a hook-stop issues a synchronous execution command, we print the same stop event twice: (gdb) define hook-stop Type commands for definition of "hook-stop". End with a line saying just "end". >si >end (gdb) si 0x000000000040074a 42 args[i] = 1; /* Init value. */ <<<<<<< once 0x000000000040074a 42 args[i] = 1; /* Init value. */ <<<<<<< twice (gdb) In MI: *stopped,reason="end-stepping-range",frame={addr="0x000000000040074a",func="main",args=[],file="threads.c",fullname="/home/pedro/gdb/tests/threads.c",line="42"},thread-id="1",stopped-threads="all",core="0" *stopped,reason="end-stepping-range",frame={addr="0x000000000040074a",func="main",args=[],file="threads.c",fullname="/home/pedro/gdb/tests/threads.c",line="42"},thread-id="1",stopped-threads="all",core="0" (gdb) The fix has GDB stop processing the event if the context changed. I don't expect people to be doing crazy things from the hook-stop. E.g., it gives me headaches to try to come up a proper behavior for handling a thread change from a hook-stop... (E.g., imagine the hook-stop does thread N; step, with scheduler-locing on). I think the most important bit here is preventing crashes. The patch adds a new hook-stop.exp test that covers the above and also merges in the old hook-stop-continue.exp and hook-stop-frame.exp into the same framework. gdb/ChangeLog: 2015-09-14 Pedro Alves <palves@redhat.com> * infrun.c (current_stop_id): New global. (get_stop_id, new_stop_id): New functions. (fetch_inferior_event): Handle normal_stop proceeding the target. (struct stop_context): New. (save_stop_context, release_stop_context_cleanup) (stop_context_changed): New functions. (normal_stop): Return true if the hook-stop changes the stop context. * infrun.h (get_stop_id): Declare. (normal_stop): Now returns int. Add documentation. gdb/testsuite/ChangeLog: 2015-09-14 Pedro Alves <palves@redhat.com> * gdb.base/hook-stop-continue.c: Delete. * gdb.base/hook-stop-continue.exp: Delete. * gdb.base/hook-stop-frame.c: Delete. * gdb.base/hook-stop-frame.exp: Delete. * gdb.base/hook-stop.c: New file. * gdb.base/hook-stop.exp: New file.
2015-09-14 16:45:14 +02:00
/* Returns a unique identifier for the current stop. This can be used
to tell whether a command has proceeded the inferior past the
current location. */
extern ULONGEST get_stop_id (void);
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 13:29:11 +02:00
/* Reverse execution. */
enum exec_direction_kind
{
EXEC_FORWARD,
EXEC_REVERSE
};
/* The current execution direction. */
extern enum exec_direction_kind execution_direction;
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 13:29:11 +02:00
extern void start_remote (int from_tty);
Always pass signals to the right thread Currently, GDB can pass a signal to the wrong thread in several different but related scenarios. E.g., if thread 1 stops for signal SIGFOO, the user switches to thread 2, and then issues "continue", SIGFOO is actually delivered to thread 2, not thread 1. This obviously messes up programs that use pthread_kill to send signals to specific threads. This has been a known issue for a long while. Back in 2008 when I made stop_signal be per-thread (2020b7ab), I kept the behavior -- see code in 'proceed' being removed -- wanting to come back to it later. The time has finally come now. The patch fixes this -- on resumption, intercepted signals are always delivered to the thread that had intercepted them. Another example: if thread 1 stops for a breakpoint, the user switches to thread 2, and then issues "signal SIGFOO", SIGFOO is actually delivered to thread 1, not thread 2, because 'proceed' first switches to thread 1 to step over its breakpoint... If the user deletes the breakpoint before issuing "signal FOO", then the signal is delivered to thread 2 (the current thread). "signal SIGFOO" can be used for two things: inject a signal in the program while the program/thread had stopped for none, bypassing "handle nopass"; or changing/suppressing a signal the program had stopped for. These scenarios are really two faces of the same coin, and GDB can't really guess what the user is trying to do. GDB might have intercepted signals in more than one thread even (see the new signal-command-multiple-signals-pending.exp test). At least in the inject case, it's obviously clear to me that the user means to deliver the signal to the currently selected thread, so best is to make the command's behavior consistent and easy to explain. Then, if the user is trying to suppress/change a signal the program had stopped for instead of injecting a new signal, but, the user had changed threads meanwhile, then she will be surprised that with: (gdb) continue Thread 1 stopped for signal SIGFOO. (gdb) thread 2 (gdb) signal SIGBAR ... GDB actually delivers SIGFOO to thread 1, and SIGBAR to thread 2 (with scheduler-locking off, which is the default, because then "signal" or any other resumption command resumes all threads). So the patch makes GDB detect that, and ask for confirmation: (gdb) thread 1 [Switching to thread 1 (Thread 10979)] (gdb) signal SIGUSR2 Note: Thread 3 previously stopped with signal SIGUSR2, User defined signal 2. Thread 2 previously stopped with signal SIGUSR1, User defined signal 1. Continuing thread 1 (the current thread) with specified signal will still deliver the signals noted above to their respective threads. Continue anyway? (y or n) All these scenarios are covered by the new tests. Tested on x86_64 Fedora 20, native and gdbserver. gdb/ 2014-07-25 Pedro Alves <palves@redhat.com> * NEWS: Mention signal passing and "signal" command changes. * gdbthread.h (struct thread_suspend_state) <stop_signal>: Extend comment. * breakpoint.c (until_break_command): Adjust clear_proceed_status call. * infcall.c (run_inferior_call): Adjust clear_proceed_status call. * infcmd.c (proceed_thread_callback, continue_1, step_once) (jump_command): Adjust clear_proceed_status call. (signal_command): Warn if other thread that are resumed have signals that will be delivered. Adjust clear_proceed_status call. (until_next_command, finish_command) (proceed_after_attach_callback, attach_command_post_wait) (attach_command): Adjust clear_proceed_status call. * infrun.c (proceed_after_vfork_done): Likewise. (proceed_after_attach_callback): Adjust comment. (clear_proceed_status_thread): Clear stop_signal if not in pass state. (clear_proceed_status_callback): Delete. (clear_proceed_status): New 'step' parameter. Only clear the proceed status of threads the command being prepared is about to resume. (proceed): If passed in an explicit signal, override stop_signal with it. Don't pass the last stop signal to the thread we're resuming. (init_wait_for_inferior): Adjust clear_proceed_status call. (switch_back_to_stepped_thread): Clear the signal if it should not be passed. * infrun.h (clear_proceed_status): New 'step' parameter. (user_visible_resume_ptid): Add comment. * linux-nat.c (linux_nat_resume_callback): Don't check whether the signal is in pass state. * remote.c (append_pending_thread_resumptions): Likewise. * mi/mi-main.c (proceed_thread): Adjust clear_proceed_status call. gdb/doc/ 2014-07-25 Pedro Alves <palves@redhat.com> Eli Zaretskii <eliz@gnu.org> * gdb.texinfo (Signaling) <signal command>: Explain what happens with multi-threaded programs. gdb/testsuite/ 2014-07-25 Pedro Alves <palves@redhat.com> * gdb.threads/signal-command-handle-nopass.c: New file. * gdb.threads/signal-command-handle-nopass.exp: New file. * gdb.threads/signal-command-multiple-signals-pending.c: New file. * gdb.threads/signal-command-multiple-signals-pending.exp: New file. * gdb.threads/signal-delivered-right-thread.c: New file. * gdb.threads/signal-delivered-right-thread.exp: New file.
2014-07-25 17:57:31 +02:00
/* Clear out all variables saying what to do when inferior is
continued or stepped. First do this, then set the ones you want,
then call `proceed'. STEP indicates whether we're preparing for a
step/stepi command. */
extern void clear_proceed_status (int step);
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 13:29:11 +02:00
Remove 'step' parameters from 'proceed' and 'resume' The "step" parameters of 'proceed' and 'resume' aren't really useful as indication of whether run control wants to single-step the target, as that information must already be retrievable from currently_stepping. In fact, if currently_stepping disagrees with whether we single-stepped the target, then things break. Thus instead of having the same information in two places, this patch removes those parameters. Setting 'step_start_function' is the only user of proceed's 'step' argument, other than passing the 'step' argument down to 'resume' and debug log output. Move that instead to set_step_frame, where we already set other related fields. clear_proceed_status keeps its "step" parameter for now because it needs to know which set of threads should have their state cleared, and is called before the "stepping_command" flag is set. Tested on x86_64 Fedora 20, native and gdbserver. gdb/ChangeLog: 2015-03-24 Pedro Alves <palves@redhat.com> * breakpoint.c (until_break_command): Adjust call to proceed. * gdbthread.h (struct thread_control_state) <stepping_command>: New field. * infcall.c (run_inferior_call): Adjust call to proceed. * infcmd.c (run_command_1, proceed_thread_callback, continue_1): Adjust calls to proceed. (set_step_frame): Set the current thread's step_start_function here. (step_once): Adjust calls to proceed. (jump_command, signal_command, until_next_command) (finish_backward, finish_forward, proceed_after_attach_callback) (attach_command_post_wait): Adjust calls to proceed. * infrun.c (proceed_after_vfork_done): Adjust call to proceed. (do_target_resume): New function, factored out from ... (resume): ... here. Remove 'step' parameter. Instead, check currently_stepping to determine whether the thread should be single-stepped. (proceed): Remove 'step' parameter and don't set the thread's step_start_function here. Adjust call to 'resume'. (handle_inferior_event): Adjust calls to 'resume'. (switch_back_to_stepped_thread): Use do_target_resume instead of 'resume'. (keep_going): Adjust calls to 'resume'. * infrun.h (proceed): Remove 'step' parameter. (resume): Likewise. * windows-nat.c (do_initial_windows_stuff): Adjust call to 'resume'. * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
2015-03-24 18:50:31 +01:00
extern void proceed (CORE_ADDR, enum gdb_signal);
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 13:29:11 +02:00
/* The `resume' routine should only be called in special circumstances.
Normally, use `proceed', which handles a lot of bookkeeping. */
Remove 'step' parameters from 'proceed' and 'resume' The "step" parameters of 'proceed' and 'resume' aren't really useful as indication of whether run control wants to single-step the target, as that information must already be retrievable from currently_stepping. In fact, if currently_stepping disagrees with whether we single-stepped the target, then things break. Thus instead of having the same information in two places, this patch removes those parameters. Setting 'step_start_function' is the only user of proceed's 'step' argument, other than passing the 'step' argument down to 'resume' and debug log output. Move that instead to set_step_frame, where we already set other related fields. clear_proceed_status keeps its "step" parameter for now because it needs to know which set of threads should have their state cleared, and is called before the "stepping_command" flag is set. Tested on x86_64 Fedora 20, native and gdbserver. gdb/ChangeLog: 2015-03-24 Pedro Alves <palves@redhat.com> * breakpoint.c (until_break_command): Adjust call to proceed. * gdbthread.h (struct thread_control_state) <stepping_command>: New field. * infcall.c (run_inferior_call): Adjust call to proceed. * infcmd.c (run_command_1, proceed_thread_callback, continue_1): Adjust calls to proceed. (set_step_frame): Set the current thread's step_start_function here. (step_once): Adjust calls to proceed. (jump_command, signal_command, until_next_command) (finish_backward, finish_forward, proceed_after_attach_callback) (attach_command_post_wait): Adjust calls to proceed. * infrun.c (proceed_after_vfork_done): Adjust call to proceed. (do_target_resume): New function, factored out from ... (resume): ... here. Remove 'step' parameter. Instead, check currently_stepping to determine whether the thread should be single-stepped. (proceed): Remove 'step' parameter and don't set the thread's step_start_function here. Adjust call to 'resume'. (handle_inferior_event): Adjust calls to 'resume'. (switch_back_to_stepped_thread): Use do_target_resume instead of 'resume'. (keep_going): Adjust calls to 'resume'. * infrun.h (proceed): Remove 'step' parameter. (resume): Likewise. * windows-nat.c (do_initial_windows_stuff): Adjust call to 'resume'. * mi/mi-main.c (proceed_thread): Adjust call to 'proceed'.
2015-03-24 18:50:31 +01:00
extern void resume (enum gdb_signal);
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 13:29:11 +02:00
Always pass signals to the right thread Currently, GDB can pass a signal to the wrong thread in several different but related scenarios. E.g., if thread 1 stops for signal SIGFOO, the user switches to thread 2, and then issues "continue", SIGFOO is actually delivered to thread 2, not thread 1. This obviously messes up programs that use pthread_kill to send signals to specific threads. This has been a known issue for a long while. Back in 2008 when I made stop_signal be per-thread (2020b7ab), I kept the behavior -- see code in 'proceed' being removed -- wanting to come back to it later. The time has finally come now. The patch fixes this -- on resumption, intercepted signals are always delivered to the thread that had intercepted them. Another example: if thread 1 stops for a breakpoint, the user switches to thread 2, and then issues "signal SIGFOO", SIGFOO is actually delivered to thread 1, not thread 2, because 'proceed' first switches to thread 1 to step over its breakpoint... If the user deletes the breakpoint before issuing "signal FOO", then the signal is delivered to thread 2 (the current thread). "signal SIGFOO" can be used for two things: inject a signal in the program while the program/thread had stopped for none, bypassing "handle nopass"; or changing/suppressing a signal the program had stopped for. These scenarios are really two faces of the same coin, and GDB can't really guess what the user is trying to do. GDB might have intercepted signals in more than one thread even (see the new signal-command-multiple-signals-pending.exp test). At least in the inject case, it's obviously clear to me that the user means to deliver the signal to the currently selected thread, so best is to make the command's behavior consistent and easy to explain. Then, if the user is trying to suppress/change a signal the program had stopped for instead of injecting a new signal, but, the user had changed threads meanwhile, then she will be surprised that with: (gdb) continue Thread 1 stopped for signal SIGFOO. (gdb) thread 2 (gdb) signal SIGBAR ... GDB actually delivers SIGFOO to thread 1, and SIGBAR to thread 2 (with scheduler-locking off, which is the default, because then "signal" or any other resumption command resumes all threads). So the patch makes GDB detect that, and ask for confirmation: (gdb) thread 1 [Switching to thread 1 (Thread 10979)] (gdb) signal SIGUSR2 Note: Thread 3 previously stopped with signal SIGUSR2, User defined signal 2. Thread 2 previously stopped with signal SIGUSR1, User defined signal 1. Continuing thread 1 (the current thread) with specified signal will still deliver the signals noted above to their respective threads. Continue anyway? (y or n) All these scenarios are covered by the new tests. Tested on x86_64 Fedora 20, native and gdbserver. gdb/ 2014-07-25 Pedro Alves <palves@redhat.com> * NEWS: Mention signal passing and "signal" command changes. * gdbthread.h (struct thread_suspend_state) <stop_signal>: Extend comment. * breakpoint.c (until_break_command): Adjust clear_proceed_status call. * infcall.c (run_inferior_call): Adjust clear_proceed_status call. * infcmd.c (proceed_thread_callback, continue_1, step_once) (jump_command): Adjust clear_proceed_status call. (signal_command): Warn if other thread that are resumed have signals that will be delivered. Adjust clear_proceed_status call. (until_next_command, finish_command) (proceed_after_attach_callback, attach_command_post_wait) (attach_command): Adjust clear_proceed_status call. * infrun.c (proceed_after_vfork_done): Likewise. (proceed_after_attach_callback): Adjust comment. (clear_proceed_status_thread): Clear stop_signal if not in pass state. (clear_proceed_status_callback): Delete. (clear_proceed_status): New 'step' parameter. Only clear the proceed status of threads the command being prepared is about to resume. (proceed): If passed in an explicit signal, override stop_signal with it. Don't pass the last stop signal to the thread we're resuming. (init_wait_for_inferior): Adjust clear_proceed_status call. (switch_back_to_stepped_thread): Clear the signal if it should not be passed. * infrun.h (clear_proceed_status): New 'step' parameter. (user_visible_resume_ptid): Add comment. * linux-nat.c (linux_nat_resume_callback): Don't check whether the signal is in pass state. * remote.c (append_pending_thread_resumptions): Likewise. * mi/mi-main.c (proceed_thread): Adjust clear_proceed_status call. gdb/doc/ 2014-07-25 Pedro Alves <palves@redhat.com> Eli Zaretskii <eliz@gnu.org> * gdb.texinfo (Signaling) <signal command>: Explain what happens with multi-threaded programs. gdb/testsuite/ 2014-07-25 Pedro Alves <palves@redhat.com> * gdb.threads/signal-command-handle-nopass.c: New file. * gdb.threads/signal-command-handle-nopass.exp: New file. * gdb.threads/signal-command-multiple-signals-pending.c: New file. * gdb.threads/signal-command-multiple-signals-pending.exp: New file. * gdb.threads/signal-delivered-right-thread.c: New file. * gdb.threads/signal-delivered-right-thread.exp: New file.
2014-07-25 17:57:31 +02:00
/* Return a ptid representing the set of threads that we will proceed,
in the perspective of the user/frontend. We may actually resume
fewer threads at first, e.g., if a thread is stopped at a
breakpoint that needs stepping-off, but that should not be visible
to the user/frontend, and neither should the frontend/user be
allowed to proceed any of the threads that happen to be stopped for
internal run control handling, if a previous command wanted them
resumed. */
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 13:29:11 +02:00
extern ptid_t user_visible_resume_ptid (int step);
extern void wait_for_inferior (void);
Bail out of processing stop if hook-stop resumes target / changes context This patch, relative to a tree with https://sourceware.org/ml/gdb-patches/2015-08/msg00295.html, fixes issues/crashes that trigger if something unexpected happens during a hook-stop. E.g., if the inferior disappears while running the hook-stop, we hit failed assertions: (gdb) define hook-stop Type commands for definition of "hook-stop". End with a line saying just "end". >kill >end (gdb) si Kill the program being debugged? (y or n) [answered Y; input not from terminal] /home/pedro/gdb/mygit/build/../src/gdb/thread.c:88: internal-error: inferior_thread: Assertion `tp' failed. A problem internal to GDB has been detected, further debugging may prove unreliable. Quit this debugging session? (y or n) I noticed that if a hook-stop issues a synchronous execution command, we print the same stop event twice: (gdb) define hook-stop Type commands for definition of "hook-stop". End with a line saying just "end". >si >end (gdb) si 0x000000000040074a 42 args[i] = 1; /* Init value. */ <<<<<<< once 0x000000000040074a 42 args[i] = 1; /* Init value. */ <<<<<<< twice (gdb) In MI: *stopped,reason="end-stepping-range",frame={addr="0x000000000040074a",func="main",args=[],file="threads.c",fullname="/home/pedro/gdb/tests/threads.c",line="42"},thread-id="1",stopped-threads="all",core="0" *stopped,reason="end-stepping-range",frame={addr="0x000000000040074a",func="main",args=[],file="threads.c",fullname="/home/pedro/gdb/tests/threads.c",line="42"},thread-id="1",stopped-threads="all",core="0" (gdb) The fix has GDB stop processing the event if the context changed. I don't expect people to be doing crazy things from the hook-stop. E.g., it gives me headaches to try to come up a proper behavior for handling a thread change from a hook-stop... (E.g., imagine the hook-stop does thread N; step, with scheduler-locing on). I think the most important bit here is preventing crashes. The patch adds a new hook-stop.exp test that covers the above and also merges in the old hook-stop-continue.exp and hook-stop-frame.exp into the same framework. gdb/ChangeLog: 2015-09-14 Pedro Alves <palves@redhat.com> * infrun.c (current_stop_id): New global. (get_stop_id, new_stop_id): New functions. (fetch_inferior_event): Handle normal_stop proceeding the target. (struct stop_context): New. (save_stop_context, release_stop_context_cleanup) (stop_context_changed): New functions. (normal_stop): Return true if the hook-stop changes the stop context. * infrun.h (get_stop_id): Declare. (normal_stop): Now returns int. Add documentation. gdb/testsuite/ChangeLog: 2015-09-14 Pedro Alves <palves@redhat.com> * gdb.base/hook-stop-continue.c: Delete. * gdb.base/hook-stop-continue.exp: Delete. * gdb.base/hook-stop-frame.c: Delete. * gdb.base/hook-stop-frame.exp: Delete. * gdb.base/hook-stop.c: New file. * gdb.base/hook-stop.exp: New file.
2015-09-14 16:45:14 +02:00
/* Return control to GDB when the inferior stops for real. Print
appropriate messages, remove breakpoints, give terminal our modes,
and run the stop hook. Returns true if the stop hook proceeded the
target, false otherwise. */
extern int normal_stop (void);
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 13:29:11 +02:00
extern void get_last_target_status (ptid_t *ptid,
struct target_waitstatus *status);
Remote all-stop-on-top-of-non-stop This is the first pass at implementing support for all-stop mode running against the remote target using the non-stop variant of the protocol. The trickiest part here is the initial connection setup/synching. We need to fetch all inferiors' target descriptions etc. before stopping threads, because stop_all_threads needs to read the threads' registers (to record each thread's stop_pc). But OTOH, the initial inferior setup (target_post_attach, post_create_inferior, etc.), only works correctly if the inferior is stopped... So I've split that initial setup part from attach_command_post_wait to a separate function, and added a "still needs setup" flag to the inferior structure. This is similar to gdbserver/linux-low.c's handling of discovering the process's target description). Then if on connection all threads of the remote inferior are running, when we go about stopping them, as soon as they stop we call setup_inferior, from within stop_all_threads. Also, in all-stop, we need to process all the initial stop replies to learn about all the pending signal the threads may already be stopped for, and pick the one to report as current. This is exposed by gdb.threads/reconnect-signal.exp. gdb/ 2015-11-30 Pedro Alves <palves@redhat.com> * gdbthread.h (switch_to_thread_no_regs): Declare. * infcmd.c (setup_inferior): New function, factored out from ... (attach_command_post_wait): ... this. Rename to ... (attach_post_wait): ... this. Replace parameter async_exec with attach_post_wait_mode parameter. Adjust. (enum attach_post_wait_mode): New enum. (struct attach_command_continuation_args): Replace 'async_exec' field with 'mode' field. (attach_command_continuation): Adjust. (attach_command): Add comment. Mark the inferior as needing setup. Adjust to use enum attach_post_wait_mode. (notice_new_inferior): Use switch_to_thread_no_regs. Adjust to use enum attach_post_wait_mode. * inferior.h (setup_inferior): Declare. (struct inferior) <needs_setup>: New field. * infrun.c (set_last_target_status): Make extern. (stop_all_threads): Make extern. Setup inferior, if necessary. * infrun.h (set_last_target_status, stop_all_threads): Declare. * remote-notif.c (remote_async_get_pending_events_handler) (handle_notification): Replace non_stop checks with target_is_non_stop_p() checks. * remote.c (remote_notice_new_inferior): Remove non_stop check. (remote_update_thread_list): Replace non_stop check with target_is_non_stop_p() check. (print_one_stopped_thread): New function. (process_initial_stop_replies): New 'from_tty' parameter. "Notice" all new live inferiors after storing initial stops as pending status in each corresponding thread. If all-stop, stop all threads, try picking a signalled thread as current, and print the status of that one thread. Record the last target status. (remote_start_remote): Replace non_stop checks with target_is_non_stop_p() checks. Don't query for the remote current thread of use qOffsets here. Pass from_tty to process_initial_stop_replies. (extended_remote_attach): Replace non_stop checks with target_is_non_stop_p() checks. (extended_remote_post_attach): Send qOffsets here. (remote_vcont_resume, remote_resume, remote_stop) (remote_interrupt, remote_parse_stop_reply, remote_wait): Replace non_stop checks with target_is_non_stop_p() checks. (remote_async): If target is non-stop, mark/clear the pending events token. * thread.c (switch_to_thread_no_regs): New function.
2015-11-30 17:05:13 +01:00
extern void set_last_target_status (ptid_t ptid,
struct target_waitstatus status);
/* Stop all threads. Only returns after everything is halted. */
extern void stop_all_threads (void);
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 13:29:11 +02:00
extern void prepare_for_detach (void);
extern void fetch_inferior_event (void *);
extern void init_wait_for_inferior (void);
extern void insert_step_resume_breakpoint_at_sal (struct gdbarch *,
struct symtab_and_line ,
struct frame_id);
/* Returns true if we're trying to step past the instruction at
ADDRESS in ASPACE. */
extern int stepping_past_instruction_at (struct address_space *aspace,
CORE_ADDR address);
Rewrite non-continuable watchpoints handling When GDB finds out the target triggered a watchpoint, and the target has non-continuable watchpoints, GDB sets things up to step past the instruction that triggered the watchpoint. This is just like stepping past a breakpoint, but goes through a different mechanism - it resumes only the thread that needs to step past the watchpoint, but also switches a "infwait state" global, that has the effect that the next target_wait only wait for events only from that thread. This forcing of a ptid to pass to target_wait obviously becomes a bottleneck if we ever support stepping past different watchpoints simultaneously (in separate processes). It's also unnecessary -- the target should only return events for threads that have been resumed; if no other thread than the one we're stepping past the watchpoint has been resumed, then those other threads should not report events. If we couldn't assume that, then stepping past regular breakpoints would be broken for not likewise forcing a similar infwait_state. So this patch eliminates infwait_state, and instead teaches keep_going to mark step_over_info in a way that has the breakpoints module skip inserting watchpoints (because we're stepping past one), like it skips breakpoints when we're stepping past one. Tested on: - x86_64 Fedora 20 (continuable watchpoints) - PPC64 Fedora 18 (non-steppable watchpoints) gdb/ 2014-10-15 Pedro Alves <palves@redhat.com> * breakpoint.c (should_be_inserted): Don't insert watchpoints if trying to step past a non-steppable watchpoint. * gdbthread.h (struct thread_info) <stepping_over_watchpoint>: New field. * infrun.c (struct step_over_info): Add new field 'nonsteppable_watchpoint_p' and adjust comments. (set_step_over_info): New 'nonsteppable_watchpoint_p' parameter. Adjust. (clear_step_over_info): Clear nonsteppable_watchpoint_p as well. (stepping_past_nonsteppable_watchpoint): New function. (step_over_info_valid_p): Also return true if stepping past a nonsteppable watchpoint. (proceed): Adjust call to set_step_over_info. Remove reference to init_infwait_state. (init_wait_for_inferior): Remove reference to init_infwait_state. (waiton_ptid): Delete global. (struct execution_control_state) <stepped_after_stopped_by_watchpoint>: Delete field. (wait_for_inferior, fetch_inferior_event): Always pass minus_one_ptid to target_wait. (init_thread_stepping_state): Clear 'stepping_over_watchpoint' field. (init_infwait_state): Delete function. (handle_inferior_event): Remove infwait_state handling. (handle_signal_stop) <watchpoints handling>: Adjust after stepped_after_stopped_by_watchpoint removal. Don't remove breakpoints here nor set infwait_state. Set the thread's stepping_over_watchpoint flag, and call keep_going instead. (keep_going): Handle stepping_over_watchpoint. Adjust set_step_over_info calls. * infrun.h (stepping_past_nonsteppable_watchpoint): Declare function.
2014-10-15 21:18:30 +02:00
/* Returns true if we're trying to step past an instruction that
triggers a non-steppable watchpoint. */
extern int stepping_past_nonsteppable_watchpoint (void);
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 13:29:11 +02:00
extern void set_step_info (struct frame_info *frame,
struct symtab_and_line sal);
PR gdb/13860 - Make MI sync vs async output (closer to) the same. Ignoring expected and desired differences like whether the prompt is output after *stoppped records, GDB MI output is still different in sync and async modes. In sync mode, when a CLI execution command is entered, the "reason" field is missing in the *stopped async record. And in async mode, for some events, like program exits, the corresponding CLI output is missing in the CLI channel. Vis, diff between sync vs async modes: run ^running *running,thread-id="1" (gdb) ... - ~"[Inferior 1 (process 15882) exited normally]\n" =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" si ... (gdb) ~"0x000000000045e033\t29\t memset (&args, 0, sizeof args);\n" - *stopped,frame=...,thread-id="1",stopped-threads="all",core="0" + *stopped,reason="end-stepping-range",frame=...,thread-id="1",stopped-threads="all",core="0" (gdb) In addition, in both cases, when a MI execution command is entered, and a breakpoint triggers, the event is sent to the console too. But some events like program exits have the CLI output missing in the CLI channel: -exec-run ^running *running,thread-id="1" (gdb) ... =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1",exit-code="0" - *stopped + *stopped,reason="exited-normally" We'll want to make background commands always possible by default. IOW, make target-async be the default. But, in order to do that, we'll need to emulate MI sync on top of an async target. That means we'll have yet another combination to care for in the testsuite. Rather than making the testsuite cope with all these differences, I thought it better to just fix GDB to always have the complete output, no matter whether it's in sync or async mode. This is all related to interpreter-exec, and the corresponding uiout switching. (Typing a CLI command directly in MI is shorthand for running it through -interpreter-exec console.) In sync mode, when a CLI command is active, normal_stop is called when the current interpreter and uiout are CLI's. So print_XXX_reason prints the stop reason to CLI uiout (only), and we don't show it in MI. In async mode the stop event is processed when we're back in the MI interpreter, so the stop reason is printed directly to the MI uiout. Fix this by making run control event printing roughly independent of whatever is the current interpreter or uiout. That is, move these prints to interpreter observers, that know whether to print or be quiet, and if printing, which uiout to print to. In the case of the console/tui interpreters, only print if the top interpreter. For MI, always print. Breakpoint hits / normal stops are already handled similarly -- MI has a normal_stop observer that prints the event to both MI and the CLI, though that could be cleaned up further in the direction of this patch. This also makes all of: (gdb) foo and (gdb) interpreter-exec MI "-exec-foo" and (gdb) -exec-foo and (gdb) -interpreter-exec console "foo" print as expected. Tested on x86_64 Fedora 20, sync and async modes. gdb/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * cli/cli-interp.c: Include infrun.h and observer.h. (cli_uiout, cli_interp): New globals. (cli_on_signal_received, cli_on_end_stepping_range) (cli_on_signal_exited, cli_on_exited, cli_on_no_history): New functions. (cli_interpreter_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_cli_interp): Remove cli_interp local. * infrun.c (handle_inferior_event): Call the several stop reason observers instead of printing the stop reason directly. (end_stepping_range): New function. (print_end_stepping_range_reason, print_signal_exited_reason) (print_exited_reason, print_signal_received_reason) (print_no_history_reason): Make static, and add an uiout parameter. Print to that instead of to CURRENT_UIOUT. * infrun.h (print_end_stepping_range_reason) (print_signal_exited_reason, print_exited_reason) (print_signal_received_reason print_no_history_reason): New declarations. * mi/mi-common.h (struct mi_interp): Rename 'uiout' field to 'mi_uiout'. <cli_uiout>: New field. * mi/mi-interp.c (mi_interpreter_init): Adjust. Create the new uiout for CLI output. Install 'signal_received', 'end_stepping_range', 'signal_exited', 'exited' and 'no_history' observers. (find_mi_interpreter, mi_interp_data, mi_on_signal_received) (mi_on_end_stepping_range, mi_on_signal_exited, mi_on_exited) (mi_on_no_history): New functions. (ui_out_free_cleanup): Delete function. (mi_on_normal_stop): Don't allocate a new uiout for CLI output, instead use the one already stored in the MI interpreter data. (mi_ui_out): Adjust. * tui/tui-interp.c: Include infrun.h and observer.h. (tui_interp): New global. (tui_on_signal_received, tui_on_end_stepping_range) (tui_on_signal_exited, tui_on_exited) (tui_on_no_history): New functions. (tui_init): Install them as 'end_stepping_range', 'signal_received' 'signal_exited', 'exited' and 'no_history' observers. (_initialize_tui_interp): Delete tui_interp local. gdb/doc/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * observer.texi (signal_received, end_stepping_range) (signal_exited, exited, no_history): New observer subjects. gdb/testsuite/ 2014-05-29 Pedro Alves <palves@redhat.com> PR gdb/13860 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop reason, even in sync mode.
2014-05-29 14:09:45 +02:00
/* Several print_*_reason helper functions to print why the inferior
has stopped to the passed in UIOUT. */
/* Signal received, print why the inferior has stopped. */
extern void print_signal_received_reason (struct ui_out *uiout,
enum gdb_signal siggnal);
/* Print why the inferior has stopped. We are done with a
step/next/si/ni command, print why the inferior has stopped. */
extern void print_end_stepping_range_reason (struct ui_out *uiout);
/* The inferior was terminated by a signal, print why it stopped. */
extern void print_signal_exited_reason (struct ui_out *uiout,
enum gdb_signal siggnal);
/* The inferior program is finished, print why it stopped. */
extern void print_exited_reason (struct ui_out *uiout, int exitstatus);
/* Reverse execution: target ran out of history info, print why the
inferior has stopped. */
extern void print_no_history_reason (struct ui_out *uiout);
Replace "struct continuation" mechanism by something more extensible This adds an object oriented replacement for the "struct continuation" mechanism, and converts the stepping commands (step, next, stepi, nexti) and the "finish" commands to use it. It adds a new thread "class" (struct thread_fsm) that contains the necessary info and callbacks to manage the state machine of a thread's execution command. This allows getting rid of some hacks. E.g., in fetch_inferior_event and normal_stop we no longer need to know whether a thread is doing a multi-step (e.g., step N). This effectively makes the intermediate_continuations unused -- they'll be garbage collected in a separate patch. (They were never a proper abstraction, IMO. See how fetch_inferior_event needs to check step_multi before knowing whether to call INF_EXEC_CONTINUE or INF_EXEC_COMPLETE.) The target async vs !async uiout hacks in mi_on_normal_stop go away too. print_stop_event is no longer called from normal_stop. Instead it is now called from within each interpreter's normal_stop observer. This clears the path to make each interpreter print a stop event the way it sees fit. Currently we have some hacks in common code to differenciate CLI vs TUI vs MI around this area. The "finish" command's FSM class stores the return value plus that value's position in the value history, so that those can be printed to both MI and CLI's streams. This fixes the CLI "finish" command when run from MI -- it now also includes the function's return value in the CLI stream: (gdb) ~"callee3 (strarg=0x400730 \"A string argument.\") at src/gdb/testsuite/gdb.mi/basics.c:35\n" ~"35\t}\n" +~"Value returned is $1 = 0\n" *stopped,reason="function-finished",frame=...,gdb-result-var="$1",return-value="0",thread-id="1",stopped-threads="all",core="0" -FAIL: gdb.mi/mi-cli.exp: CLI finish: check CLI output +PASS: gdb.mi/mi-cli.exp: CLI finish: check CLI output gdb/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * Makefile.in (COMMON_OBS): Add thread-fsm.o. * breakpoint.c (handle_jit_event): Print debug output. (bpstat_what): Split event callback handling to ... (bpstat_run_callbacks): ... this new function. (momentary_bkpt_print_it): No longer handle bp_finish here. * breakpoint.h (bpstat_run_callbacks): Declare. * gdbthread.h (struct thread_info) <step_multi>: Delete field. <thread_fsm>: New field. (thread_cancel_execution_command): Declare. * infcmd.c: Include thread-fsm.h. (struct step_command_fsm): New. (step_command_fsm_ops): New global. (new_step_command_fsm, step_command_fsm_prepare): New functions. (step_1): Adjust to use step_command_fsm_prepare and prepare_one_step. (struct step_1_continuation_args): Delete. (step_1_continuation): Delete. (step_command_fsm_should_stop): New function. (step_once): Delete. (step_command_fsm_clean_up, step_command_fsm_async_reply_reason) (prepare_one_step): New function, based on step_once. (until_next_command): Remove step_multi reference. (struct return_value_info): New. (print_return_value): Rename to ... (print_return_value_1): ... this. New struct return_value_info parameter. Adjust. (print_return_value): Reimplement as wrapper around print_return_value_1. (struct finish_command_fsm): New. (finish_command_continuation): Delete. (finish_command_fsm_ops): New global. (new_finish_command_fsm, finish_command_fsm_should_stop): New functions. (finish_command_fsm_clean_up, finish_command_fsm_return_value): New. (finish_command_continuation_free_arg): Delete. (finish_command_fsm_async_reply_reason): New. (finish_backward, finish_forward): Change symbol parameter to a finish_command_fsm. Adjust. (finish_command): Create a finish_command_fsm. Adjust. * infrun.c: Include "thread-fsm.h". (clear_proceed_status_thread): Delete the thread's FSM. (infrun_thread_stop_requested_callback): Cancel the thread's execution command. (clean_up_just_stopped_threads_fsms): New function. (fetch_inferior_event): Handle the event_thread's should_stop method saying the command isn't done yet. (process_event_stop_test): Run breakpoint callbacks here. (print_stop_event): Rename to ... (print_stop_location): ... this. (restore_current_uiout_cleanup): New function. (print_stop_event): Reimplement. (normal_stop): No longer notify the end_stepping_range observers here handle "step N" nor "finish" here. No longer call print_stop_event here. * infrun.h (struct return_value_info): Forward declare. (print_return_value): Declare. (print_stop_event): Change prototype. * thread-fsm.c: New file. * thread-fsm.h: New file. * thread.c: Include "thread-fsm.h". (thread_cancel_execution_command): New function. (clear_thread_inferior_resources): Call it. * cli/cli-interp.c (cli_on_normal_stop): New function. (cli_interpreter_init): Install cli_on_normal_stop as normal_stop observer. * mi/mi-interp.c: Include "thread-fsm.h". (restore_current_uiout_cleanup): Delete. (mi_on_normal_stop): If the thread has an FSM associated, and it finished, ask it for the async-reply-reason to print. Always call print_stop_event here, regardless of the top-level interpreter. Check bpstat_what to tell whether an asynchronous breakpoint hit triggered. * tui/tui-interp.c (tui_on_normal_stop): New function. (tui_init): Install tui_on_normal_stop as normal_stop observer. gdb/testsuite/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * gdb.mi/mi-cli.exp: Add CLI finish tests.
2015-09-09 19:23:24 +02:00
/* Print the result of a function at the end of a 'finish' command.
RV points at an object representing the captured return value/type
and its position in the value history. */
extern void print_return_value (struct ui_out *uiout,
struct return_value_info *rv);
/* Print current location without a level number, if we have changed
functions or hit a breakpoint. Print source line if we have one.
If the execution command captured a return value, print it. */
extern void print_stop_event (struct ui_out *uiout);
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 13:29:11 +02:00
remote non-stop: Process initially stopped threads before other commands The main motivation for this is making non-stop / all-stop behave similarly on initial connection, in order to move in the direction of reimplementing all-stop mode with the remote target always running in non-stop mode. When we connect to a remote target in non-stop mode, we may find threads either running or already stopped. The act of connecting itself does not force threads to stop. To handle that, the remote non-stop connection is currently roughly like this: #1 - Fetch list of remote threads (qXfer:threads:read, qfThreadInfo, etc). All threads are assumed to be running until the target reports an asynchronous stop reply for them. #2 - Fetch the initial set of threads that were already stopped, with the '?' packet. (In non-stop, this is coupled with the vStopped mechanism to be able to retrieve the status of more than one thread.) The stop replies fetched in #2 are placed in the pending stop reply queue, and left for the regular event loop to process. That is, "target remote" finishes and returns _before_ those stops are processed. That means that it's possible to have GDB process further commands before the initial set of stopped threads is reported to the user. E.g., before the patch, note how the prompt is printed before the frame: Remote debugging using :9999 (gdb) [Thread 15296] #1 stopped. 0x0000003615a011f0 in ?? () Even though thread #1 was not running, for a moment, the user can see it as such: $ gdb a.out -ex "set non-stop 1" -ex "tar rem :9999" -ex "info threads" -ex "info registers" Remote debugging using :9999 Id Target Id Frame * 1 Thread 4772 (running) Target is executing. <<<<<<< info registers (gdb) [Thread 4772] #1 stopped. 0x0000003615a011f0 in ?? () To fix that, this commit makes gdb process all threads found already stopped at connection time, before giving the prompt to the user. The fix takes a cue from fork-child.c:startup_inferior [1], and processes the events locally in remote.c, avoiding the whole wait_for_inferior/handle_inferior_event path. I decided to try this approach after noticing that: - several cases in handle_inferior_event miss checking stop_soon. - we don't want to fetch the thread list in normal_stop. and trying to fix them was resulting in sprinkling stop_soon checks in many places, and uglifying normal_stop even more. While with this patch, I'm avoiding changing GDB's output other than when the prompt is printed, I think this approach is more flexible if we do want to change it. And also, it's likely easier to get rid of the MI *running event that is still sent for threads that are initially found stopped, if we want to. This happens to fix the testsuite too. All non-stop tests are racy against "target remote" / gdbserver testing currently. That is, sometimes the tests run, but other times they're just skipped without any indication of PASS/FAIL. When that happens, the logs show: target remote localhost:2346 Remote debugging using localhost:2346 (gdb) [Thread 25418] #1 stopped. 0x0000003615a011f0 in ?? () ^CQuit (gdb) Remote debugging from host 127.0.0.1 Killing process(es): 25418 monitor exit (gdb) Remote connection closed (gdb) testcase /home/pedro/gdb/mygit/build/../src/gdb/testsuite/gdb.threads/multi-create-ns-info-thr.exp completed in 61 seconds The trouble here is that there's output after the prompt, and the regex in question doesn't expect that: -re "Remote debugging using .*$serialport_re.*$gdb_prompt $" { verbose "Set target to $targetname" return 0 } [1] - before startup_inferior was added, we'd go through wait_for_inferior/handle_inferior_event while going through the shell, and that turned out problematic. Tested on x86_64 Fedora 20, gdbserver. gdb/ChangeLog: 2015-08-20 Pedro Alves <palves@redhat.com> * infrun.c (print_target_wait_results): Make extern. * infrun.h (print_target_wait_results): Declare. * remote.c (set_stop_requested_callback): Delete. (process_initial_stop_replies): New function. (remote_start_remote): Use it. (stop_reply_queue_length): New function. gdb/testsuite/ChangeLog: 2015-08-20 Pedro Alves <palves@redhat.com> * gdb.server/connect-stopped-target.c: New file. * gdb.server/connect-stopped-target.exp: New file.
2015-08-20 19:27:55 +02:00
/* Pretty print the results of target_wait, for debugging purposes. */
extern void print_target_wait_results (ptid_t waiton_ptid, ptid_t result_ptid,
const struct target_waitstatus *ws);
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 13:29:11 +02:00
extern int signal_stop_state (int);
extern int signal_print_state (int);
extern int signal_pass_state (int);
extern int signal_stop_update (int, int);
extern int signal_print_update (int, int);
extern int signal_pass_update (int, int);
extern void update_signals_program_target (void);
/* Clear the convenience variables associated with the exit of the
inferior. Currently, those variables are $_exitcode and
$_exitsignal. */
extern void clear_exit_convenience_vars (void);
/* Dump LEN bytes at BUF in hex to FILE, followed by a newline. */
extern void displaced_step_dump_bytes (struct ui_file *file,
const gdb_byte *buf, size_t len);
extern struct displaced_step_closure *get_displaced_step_closure_by_addr
(CORE_ADDR addr);
extern void update_observer_mode (void);
extern void signal_catch_update (const unsigned int *);
/* In some circumstances we allow a command to specify a numeric
signal. The idea is to keep these circumstances limited so that
users (and scripts) develop portable habits. For comparison,
POSIX.2 `kill' requires that 1,2,3,6,9,14, and 15 work (and using a
numeric signal at all is obsolescent. We are slightly more lenient
and allow 1-15 which should match host signal numbers on most
systems. Use of symbolic signal names is strongly encouraged. */
enum gdb_signal gdb_signal_from_command (int num);
Teach non-stop to do in-line step-overs (stop all, step, restart) That is, step past breakpoints by: - pausing all threads - removing breakpoint at PC - single-step - reinsert breakpoint - restart threads similarly to all-stop (with displaced stepping disabled). This allows non-stop to work on targets/architectures without displaced stepping support. That is, it makes displaced stepping an optimization instead of a requirement. For example, in principle, all GNU/Linux ports support non-stop mode at the target_ops level, but not all corresponding gdbarch's implement displaced stepping. This should make non-stop work for all (albeit, not as efficiently). And then there are scenarios where even if the architecture supports displaced stepping, we can't use it, because we e.g., don't find a usable address to use as displaced step scratch pad. It should also fix stepping past watchpoints on targets that have non-continuable watchpoints in non-stop mode (e.g., PPC, untested). Running the instruction out of line in the displaced stepping scratch pad doesn't help that case, as the copied instruction reads/writes the same watched memory... We can fix that too by teaching GDB to only remove the watchpoint from the thread that we want to move past the watchpoint (currently, removing a watchpoint always removes it from all threads), but again, that can be considered an optimization; not all targets would support it. For those familiar with the gdb and gdbserver Linux target_ops backends, the implementation should look similar, except it is done on the core side. When we pause threads, we may find they stop with an interesting event that should be handled later when the thread is re-resumed, thus we store such events in the thread object, and mark the event as pending. We should only consume pending events if the thread is indeed resumed, thus we add a new "resumed" flag to the thread object. At a later stage, we might add new target methods to accelerate some of this, like "pause all threads", with corresponding RSP packets, but we'd still need a fallback method for remote targets that don't support such packets, so, again, that can be deferred as optimization. My _real_ motivation here is making it possible to reimplement all-stop mode on top of the target always working on non-stop mode, so that e.g., we can send RSP packets to a remote target even while the target is running -- can't do that in the all-stop RSP variant, by design). Tested on x86_64 Fedora 20, with and without "set displaced off" forced. The latter forces the new code paths whenever GDB needs to step past a breakpoint. gdb/ChangeLog: 2015-08-07 Pedro Alves <pedro@codesourcery.com> * breakpoint.c (breakpoints_should_be_inserted_now): If any thread has a pending status, return true. * gdbthread.h: Include target/waitstatus.h. (struct thread_suspend_state) <stop_reason, waitstatus_pending_p, stop_pc>: New fields. (struct thread_info) <resumed>: New field. (set_resumed): Declare. * infrun.c: Include "event-loop.h". (infrun_async_inferior_event_token, infrun_is_async): New globals. (infrun_async): New function. (clear_step_over_info): Add debug output. (displaced_step_in_progress_any_inferior): New function. (displaced_step_fixup): New returns int. (start_step_over): Handle in-line step-overs too. Assert the thread is marked resumed. (resume_cleanups): Clear the thread's resumed flag. (resume): Set the thread's resumed flag. Return early if the thread has a pending status. Allow stepping a breakpoint with no signal. (proceed): Adjust to check 'resumed' instead of 'executing'. (clear_proceed_status_thread): If the thread has a pending status, and that status is a finished step, discard the pending status. (clear_proceed_status): Don't clear step_over_info here. (random_pending_event_thread, do_target_wait): New functions. (prepare_for_detach, wait_for_inferior, fetch_inferior_event): Use do_target_wait. (wait_one): New function. (THREAD_STOPPED_BY): New macro. (thread_stopped_by_watchpoint, thread_stopped_by_sw_breakpoint) (thread_stopped_by_hw_breakpoint): New functions. (switch_to_thread_cleanup, save_waitstatus, stop_all_threads): New functions. (handle_inferior_event): Also call set_resumed(false) on all threads implicitly stopped by the event. (restart_threads, resumed_thread_with_pending_status): New functions. (finish_step_over): If we were doing an in-line step-over before, and no longer are after trying to start a new step-over, restart all threads. If we have multiple threads with pending events, save the current event and go through the event loop again. (handle_signal_stop): Return early if finish_step_over returns false. <random signal>: If we get a signal while stepping over a breakpoint in-line in non-stop mode, restart all threads. Clear step_over_info before delivering the signal. (keep_going_stepped_thread): Use internal_error instead of gdb_assert. Mark the thread as resumed. (keep_going_pass_signal): Assert the thread isn't already resumed. If some other thread is doing an in-line step-over, defer the resume. If we just started a new in-line step-over, stop all threads. Don't clear step_over_info. (infrun_async_inferior_event_handler): New function. (_initialize_infrun): Create async event handler with infrun_async_inferior_event_handler as callback. (infrun_async): New declaration. * target.c (target_async): New function. * target.h (target_async): Declare macro and readd as function declaration. * target/waitstatus.h (enum target_stop_reason) <TARGET_STOPPED_BY_SINGLE_STEP>: New value. * thread.c (new_thread): Clear the new waitstatus field. (set_resumed): New function.
2015-08-07 18:24:00 +02:00
/* Enables/disables infrun's async event source in the event loop. */
extern void infrun_async (int enable);
Merge async and sync code paths some more This patch makes the execution control code use largely the same mechanisms in both sync- and async-capable targets. This means using continuations and use the event loop to react to target events on sync targets as well. The trick is to immediately mark infrun's event loop source after resume instead of calling wait_for_inferior. Then fetch_inferior_event is adjusted to do a blocking wait on sync targets. Tested on x86_64 Fedora 20, native and gdbserver, with and without "maint set target-async off". gdb/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * breakpoint.c (bpstat_do_actions_1, until_break_command): Don't check whether the target can async. * inf-loop.c (inferior_event_handler): Only call target_async if the target can async. * infcall.c: Include top.h and interps.h. (run_inferior_call): For the interpreter to sync mode while running the infcall. Call wait_sync_command_done instead of wait_for_inferior plus normal_stop. * infcmd.c (prepare_execution_command): Don't check whether the target can async when running in the foreground. (step_1): Delete synchronous case handling. (step_once): Always install a continuation, even in sync mode. (until_next_command, finish_forward): Don't check whether the target can async. (attach_command_post_wait, notice_new_inferior): Always install a continuation, even in sync mode. * infrun.c (mark_infrun_async_event_handler): New function. (proceed): In sync mode, mark infrun's event source instead of waiting for events here. (fetch_inferior_event): If the target can't async, do a blocking wait. (prepare_to_wait): In sync mode, mark infrun's event source. (infrun_async_inferior_event_handler): No longer bail out if the target can't async. * infrun.h (mark_infrun_async_event_handler): New declaration. * linux-nat.c (linux_nat_wait_1): Remove calls to set_sigint_trap/clear_sigint_trap. (linux_nat_terminal_inferior): No longer check whether the target can async. * mi/mi-interp.c (mi_on_sync_execution_done): Update and simplify comment. (mi_execute_command_input_handler): No longer check whether the target is async. Update and simplify comment. * target.c (default_target_wait): New function. * target.h (struct target_ops) <to_wait>: Now defaults to default_target_wait. (default_target_wait): Declare. * top.c (wait_sync_command_done): New function, factored out from ... (maybe_wait_sync_command_done): ... this. * top.h (wait_sync_command_done): Declare. * target-delegates.c: Regenerate.
2015-09-09 19:23:23 +02:00
/* Call infrun's event handler the next time through the event
loop. */
extern void mark_infrun_async_event_handler (void);
Embed the pending step-over chain in thread_info objects In order to teach non-stop mode to do in-line step-overs (pause all threads, remove breakpoint, single-step, reinsert breakpoint, restart threads), we'll need to be able to queue in-line step over requests, much like we queue displaced stepping (out-of-line) requests. Actually, the queue should be the same -- threads wait for their turn to step past something (breakpoint, watchpoint), doesn't matter what technique we end up using when the step over actually starts. I found that the queue management ends up simpler and more efficient if embedded in the thread objects themselves. This commit converts the existing displaced stepping queue to that. Later patches will make the in-line step-overs code paths use it too. gdb/ChangeLog: 2015-08-07 Pedro Alves <palves@redhat.com> * gdbthread.h (struct thread_info) <step_over_prev, step_over_next>: New fields. (thread_step_over_chain_enqueue, thread_step_over_chain_remove) (thread_step_over_chain_next, thread_is_in_step_over_chain): New declarations. * infrun.c (struct displaced_step_request): Delete. (struct displaced_step_inferior_state) <step_request_queue>: Delete field. (displaced_step_prepare): Assert that trap_expected is set. Use thread_step_over_chain_enqueue. Split starting a new displaced step to ... (start_step_over): ... this new function. (resume): Assert the thread isn't waiting for a step over already. (proceed): Assert the thread isn't waiting for a step over already. (infrun_thread_stop_requested): Adjust to remove threads from the embedded step-over chain. (handle_inferior_event) <fork/vfork>: Call start_step_over after displaced_step_fixup. (handle_signal_stop): Call start_step_over after displaced_step_fixup. * infrun.h (step_over_queue_head): New declaration. * thread.c (step_over_chain_enqueue, step_over_chain_remove) (thread_step_over_chain_next, thread_is_in_step_over_chain) (thread_step_over_chain_enqueue) (thread_step_over_chain_remove): New functions. (delete_thread_1): Remove thread from the step-over chain.
2015-08-07 18:23:57 +02:00
/* The global queue of threads that need to do a step-over operation
to get past e.g., a breakpoint. */
extern struct thread_info *step_over_queue_head;
/* Remove breakpoints if possible (usually that means, if everything
is stopped). On failure, print a message. */
extern void maybe_remove_breakpoints (void);
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 13:29:11 +02:00
#endif /* INFRUN_H */