binutils-gdb/gdb/frame.h

885 lines
35 KiB
C
Raw Normal View History

/* Definitions for dealing with stack frames, for GDB, the GNU debugger.
Copyright (C) 1986-2018 Free Software Foundation, Inc.
1999-07-07 22:19:36 +02:00
This file is part of GDB.
1999-07-07 22:19:36 +02:00
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
1999-07-07 22:19:36 +02:00
(at your option) any later version.
1999-07-07 22:19:36 +02:00
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
1999-07-07 22:19:36 +02:00
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#if !defined (FRAME_H)
#define FRAME_H 1
/* The following is the intended naming schema for frame functions.
It isn't 100% consistent, but it is aproaching that. Frame naming
schema:
Prefixes:
get_frame_WHAT...(): Get WHAT from the THIS frame (functionally
equivalent to THIS->next->unwind->what)
frame_unwind_WHAT...(): Unwind THIS frame's WHAT from the NEXT
frame.
frame_unwind_caller_WHAT...(): Unwind WHAT for NEXT stack frame's
real caller. Any inlined functions in NEXT's stack frame are
skipped. Use these to ignore any potentially inlined functions,
e.g. inlined into the first instruction of a library trampoline.
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
get_stack_frame_WHAT...(): Get WHAT for THIS frame, but if THIS is
inlined, skip to the containing stack frame.
put_frame_WHAT...(): Put a value into this frame (unsafe, need to
invalidate the frame / regcache afterwards) (better name more
strongly hinting at its unsafeness)
safe_....(): Safer version of various functions, doesn't throw an
error (leave this for later?). Returns non-zero / non-NULL if the
request succeeds, zero / NULL otherwize.
Suffixes:
void /frame/_WHAT(): Read WHAT's value into the buffer parameter.
ULONGEST /frame/_WHAT_unsigned(): Return an unsigned value (the
alternative is *frame_unsigned_WHAT).
LONGEST /frame/_WHAT_signed(): Return WHAT signed value.
What:
/frame/_memory* (frame, coreaddr, len [, buf]): Extract/return
*memory.
/frame/_register* (frame, regnum [, buf]): extract/return register.
CORE_ADDR /frame/_{pc,sp,...} (frame): Resume address, innner most
stack *address, ...
*/
#include "language.h"
struct symtab_and_line;
struct frame_unwind;
struct frame_base;
2003-02-19 David Carlton <carlton@math.stanford.edu> * Makefile.in (SFILES): Add block.c. (block_h): New. (COMMON_OBS): Add block.o. (block.o): New. (x86-64-tdep.o): Add $(block_h). (values.o, valops.o, tracepoint.o, symtab.o, symmisc.o, symfile.o) (stack.o, printcmd.o, p-exp.tab.o, parse.o, objfiles.o) (objc-exp.tab.o, objc-lang.o, nlmread.o, mips-tdep.o, mdebugread.o) (m2-exp.tab.o, linespec.o, jv-lang.o, jv-exp.tab.o, infcmd.o) (f-valprint.o, findvar.o, f-exp.tab.o, expprint.o, coffread.o) (c-exp.tab.o, buildsym.o, breakpoint.o, blockframe.o, ax-gdb.o) (alpha-tdep.o, ada-lang.o, ada-exp.tab.o, mi-cmd-stack.o): Ditto. * value.h: Add opaque declaration for struct block. * parser-defs.h, objc-lang.h, buildsym.h, breakpoint.h: Ditto. * ada-lang.h: Ditto. * x86-64-tdep.c: #include "block.h" * values.c, valops.c, tracepoint.c, symtab.c, symmisc.c: Ditto. * symfile.c, stack.c, printcmd.c, p-exp.y, parse.c: Ditto. * objfiles.c, objc-exp.y, objc-lang.c, nlmread.c: Ditto. * mips-tdep.c, mdebugread.c, m2-exp.y, linespec.c: Ditto. * jv-lang.c, jv-exp.y, infcmd.c, f-valprint.c: Ditto. * findvar.c, f-exp.y, expprint.c, coffread.c, c-exp.y: Ditto. * buildsym.c, breakpoint.c, blockframe.c, ax-gdb.c: Ditto. * alpha-tdep.c, ada-lang.c, ada-exp.y: Ditto. * blockframe.c (blockvector_for_pc_sect): Move to "block.c". (blockvector_for_pc, block_for_pc_sect, block_for_pc): Ditto. * symtab.c (block_function): Ditto. (contained_in): Ditto. * frame.h: Move block_for_pc and block_for_pc_sect declarations to block.h. Add opaque declaration for struct block. * symtab.h: Move block_function and contained_in declarations to block.h. Add opaque declarations for struct block, struct blockvector. (struct block): Move to block.h. (struct blockvector): Ditto. (BLOCK_START, BLOCK_END, BLOCK_FUNCTION, BLOCK_SUPERBLOCK) (BLOCK_GCC_COMPILED, BLOCK_HASHTABLE, BLOCK_NSYMS, BLOCK_SYM) (BLOCK_BUCKETS, BLOCK_BUCKET, BLOCK_HASHTABLE_SIZE) (ALL_BLOCK_SYMBOLS, BLOCK_SHOULD_SORT, BLOCKVECTOR_NBLOCKS) (BLOCKVECTOR_BLOCK, GLOBAL_BLOCK, STATIC_BLOCK, FIRST_LOCAL_BLOCK): Ditto. * block.c: New file. * block.h: New file. 2003-02-19 David Carlton <carlton@math.stanford.edu> * mi-cmd-stack.c: #include "block.h"
2003-02-20 01:01:07 +01:00
struct block;
struct gdbarch;
struct ui_file;
struct ui_out;
"tfind" across unavailable-stack frames. Like when stepping, the current stack frame location is expected to be printed as result of tfind command, if that results in moving to a different function. In tfind_1 we see: if (from_tty && (has_stack_frames () || traceframe_number >= 0)) { enum print_what print_what; /* NOTE: in imitation of the step command, try to determine whether we have made a transition from one function to another. If so, we'll print the "stack frame" (ie. the new function and it's arguments) -- otherwise we'll just show the new source line. */ if (frame_id_eq (old_frame_id, get_frame_id (get_current_frame ()))) print_what = SRC_LINE; else print_what = SRC_AND_LOC; print_stack_frame (get_selected_frame (NULL), 1, print_what, 1); do_displays (); } However, when we haven't collected any registers in the tracepoint (collect $regs), that doesn't actually work: (gdb) tstart (gdb) info tracepoints Num Type Disp Enb Address What 1 tracepoint keep y 0x080483b7 in func0 at ../.././../git/gdb/testsuite/gdb.trace/circ.c:28 collect testload installed on target 2 tracepoint keep y 0x080483bc in func1 at ../.././../git/gdb/testsuite/gdb.trace/circ.c:32 collect testload installed on target (gdb) c Continuing. Breakpoint 3, end () at ../.././../git/gdb/testsuite/gdb.trace/circ.c:72 72 } (gdb) tstop (gdb) tfind start Found trace frame 0, tracepoint 1 #0 func0 () at ../.././../git/gdb/testsuite/gdb.trace/circ.c:28 28 } (gdb) tfind Found trace frame 1, tracepoint 2 32 } (gdb) When we don't have info about the stack available (UNWIND_UNAVAILABLE), frames end up with outer_frame_id as frame ID. And in the scenario above, the issue is that both frames before and after the second tfind (the frames for func0 an func1) have the same id (outer_frame_id), so the frame_id_eq check returns false, even though the frames were of different functions. GDB knows that, because the PC is inferred from the tracepoint's address, even if no registers were collected. To fix this, this patch adds support for frame ids with a valid code address, but <unavailable> stack address, and then makes the unwinders use that instead of the catch-all outer_frame_id for such frames. The frame_id_eq check in tfind_1 then automatically does the right thing as expected. I tested with --directory=gdb.trace/ , before/after the patch, and compared the resulting gdb.logs, then adjusted the tests to expect the extra output that came out. Turns out that was only circ.exp, the original test that actually brought this issue to light. Tested on x86_64 Fedora 17, native and gdbserver. gdb/ 2013-12-17 Pedro Alves <palves@redhat.com> * frame.h (enum frame_id_stack_status): New enum. (struct frame_id) <stack_addr>: Adjust comment. <stack_addr_p>: Delete field, replaced with ... <stack_status>: ... this new field. (frame_id_build_unavailable_stack): Declare. * frame.c (frame_addr_hash, fprint_field, outer_frame_id) (frame_id_build_special): Adjust. (frame_id_build_unavailable_stack): New function. (frame_id_build, frame_id_build_wild): Adjust. (frame_id_p, frame_id_eq, frame_id_inner): Adjust to take into account frames with unavailable stack. * amd64-tdep.c (amd64_frame_this_id) (amd64_sigtramp_frame_this_id, amd64_epilogue_frame_this_id): Use frame_id_build_unavailable_stack. * dwarf2-frame.c (dwarf2_frame_this_id): Likewise. * i386-tdep.c (i386_frame_this_id, i386_epilogue_frame_this_id) (i386_sigtramp_frame_this_id): Likewise. gdb/testsuite/ 2013-12-17 Pedro Alves <palves@redhat.com> * gdb.trace/circ.exp: Expect frame info to be printed when switching between frames with unavailable stack, but different functions.
2013-12-17 21:47:36 +01:00
/* Status of a given frame's stack. */
enum frame_id_stack_status
{
/* Stack address is invalid. E.g., this frame is the outermost
(i.e., _start), and the stack hasn't been setup yet. */
FID_STACK_INVALID = 0,
/* Stack address is valid, and is found in the stack_addr field. */
FID_STACK_VALID = 1,
Distinguish sentinel frame from null frame. This patch replaces the `current_frame' static global in frame.c with `sentinel_frame'. It also makes the sentinel frame id unique and different from the null frame. By itself, there is not much point to this patch, but it makes the code cleaner for the VALUE_FRAME_ID changes in another patch. Since we now allow "navigation" to the sentinel frame, it removes the necessity of adding special cases to other parts of GDB. Note that a new function, get_next_frame_sentinel_okay, is introduced in this patch. It will be used by the VALUE_FRAME_ID changes that I've made. Thanks to Pedro Alves for this suggestion. gdb/ChangeLog: * frame.h (enum frame_id_stack_status): Add FID_STACK_SENTINEL. (struct frame_id): Increase number of bits required for storing stack status to 3 from 2. (sentinel_frame_id): New declaration. (get_next_frame_sentinel_okay): Declare. (frame_find_by_id_sentinel_okay): Declare. * frame.c (current_frame): Rename this static global to... (sentinel_frame): ...this static global, which has also been moved an earlier location in the file. (fprint_frame_id): Add case for sentinel frame id. (get_frame_id): Return early for sentinel frame. (sentinel_frame_id): Define. (frame_find_by_id): Add case for sentinel_frame_id. (create_sentinel_frame): Use sentinel_frame_id for this_id.value instead of null_frame_id. (get_current_frame): Add local declaration for `current_frame'. Remove local declaration for `sentinel_frame.' (get_next_frame_sentinel_okay): New function. (reinit_frame_cache): Use `sentinel_frame' in place of `current_frame'.
2016-09-28 05:33:38 +02:00
/* Sentinel frame. */
FID_STACK_SENTINEL = 2,
"tfind" across unavailable-stack frames. Like when stepping, the current stack frame location is expected to be printed as result of tfind command, if that results in moving to a different function. In tfind_1 we see: if (from_tty && (has_stack_frames () || traceframe_number >= 0)) { enum print_what print_what; /* NOTE: in imitation of the step command, try to determine whether we have made a transition from one function to another. If so, we'll print the "stack frame" (ie. the new function and it's arguments) -- otherwise we'll just show the new source line. */ if (frame_id_eq (old_frame_id, get_frame_id (get_current_frame ()))) print_what = SRC_LINE; else print_what = SRC_AND_LOC; print_stack_frame (get_selected_frame (NULL), 1, print_what, 1); do_displays (); } However, when we haven't collected any registers in the tracepoint (collect $regs), that doesn't actually work: (gdb) tstart (gdb) info tracepoints Num Type Disp Enb Address What 1 tracepoint keep y 0x080483b7 in func0 at ../.././../git/gdb/testsuite/gdb.trace/circ.c:28 collect testload installed on target 2 tracepoint keep y 0x080483bc in func1 at ../.././../git/gdb/testsuite/gdb.trace/circ.c:32 collect testload installed on target (gdb) c Continuing. Breakpoint 3, end () at ../.././../git/gdb/testsuite/gdb.trace/circ.c:72 72 } (gdb) tstop (gdb) tfind start Found trace frame 0, tracepoint 1 #0 func0 () at ../.././../git/gdb/testsuite/gdb.trace/circ.c:28 28 } (gdb) tfind Found trace frame 1, tracepoint 2 32 } (gdb) When we don't have info about the stack available (UNWIND_UNAVAILABLE), frames end up with outer_frame_id as frame ID. And in the scenario above, the issue is that both frames before and after the second tfind (the frames for func0 an func1) have the same id (outer_frame_id), so the frame_id_eq check returns false, even though the frames were of different functions. GDB knows that, because the PC is inferred from the tracepoint's address, even if no registers were collected. To fix this, this patch adds support for frame ids with a valid code address, but <unavailable> stack address, and then makes the unwinders use that instead of the catch-all outer_frame_id for such frames. The frame_id_eq check in tfind_1 then automatically does the right thing as expected. I tested with --directory=gdb.trace/ , before/after the patch, and compared the resulting gdb.logs, then adjusted the tests to expect the extra output that came out. Turns out that was only circ.exp, the original test that actually brought this issue to light. Tested on x86_64 Fedora 17, native and gdbserver. gdb/ 2013-12-17 Pedro Alves <palves@redhat.com> * frame.h (enum frame_id_stack_status): New enum. (struct frame_id) <stack_addr>: Adjust comment. <stack_addr_p>: Delete field, replaced with ... <stack_status>: ... this new field. (frame_id_build_unavailable_stack): Declare. * frame.c (frame_addr_hash, fprint_field, outer_frame_id) (frame_id_build_special): Adjust. (frame_id_build_unavailable_stack): New function. (frame_id_build, frame_id_build_wild): Adjust. (frame_id_p, frame_id_eq, frame_id_inner): Adjust to take into account frames with unavailable stack. * amd64-tdep.c (amd64_frame_this_id) (amd64_sigtramp_frame_this_id, amd64_epilogue_frame_this_id): Use frame_id_build_unavailable_stack. * dwarf2-frame.c (dwarf2_frame_this_id): Likewise. * i386-tdep.c (i386_frame_this_id, i386_epilogue_frame_this_id) (i386_sigtramp_frame_this_id): Likewise. gdb/testsuite/ 2013-12-17 Pedro Alves <palves@redhat.com> * gdb.trace/circ.exp: Expect frame info to be printed when switching between frames with unavailable stack, but different functions.
2013-12-17 21:47:36 +01:00
/* Stack address is unavailable. I.e., there's a valid stack, but
we don't know where it is (because memory or registers we'd
compute it from were not collected). */
FID_STACK_UNAVAILABLE = -1
};
/* The frame object. */
struct frame_info;
/* The frame object's ID. This provides a per-frame unique identifier
that can be used to relocate a `struct frame_info' after a target
resume or a frame cache destruct. It of course assumes that the
inferior hasn't unwound the stack past that frame. */
struct frame_id
{
/* The frame's stack address. This shall be constant through out
the lifetime of a frame. Note that this requirement applies to
not just the function body, but also the prologue and (in theory
at least) the epilogue. Since that value needs to fall either on
the boundary, or within the frame's address range, the frame's
outer-most address (the inner-most address of the previous frame)
is used. Watch out for all the legacy targets that still use the
function pointer register or stack pointer register. They are
wrong.
"tfind" across unavailable-stack frames. Like when stepping, the current stack frame location is expected to be printed as result of tfind command, if that results in moving to a different function. In tfind_1 we see: if (from_tty && (has_stack_frames () || traceframe_number >= 0)) { enum print_what print_what; /* NOTE: in imitation of the step command, try to determine whether we have made a transition from one function to another. If so, we'll print the "stack frame" (ie. the new function and it's arguments) -- otherwise we'll just show the new source line. */ if (frame_id_eq (old_frame_id, get_frame_id (get_current_frame ()))) print_what = SRC_LINE; else print_what = SRC_AND_LOC; print_stack_frame (get_selected_frame (NULL), 1, print_what, 1); do_displays (); } However, when we haven't collected any registers in the tracepoint (collect $regs), that doesn't actually work: (gdb) tstart (gdb) info tracepoints Num Type Disp Enb Address What 1 tracepoint keep y 0x080483b7 in func0 at ../.././../git/gdb/testsuite/gdb.trace/circ.c:28 collect testload installed on target 2 tracepoint keep y 0x080483bc in func1 at ../.././../git/gdb/testsuite/gdb.trace/circ.c:32 collect testload installed on target (gdb) c Continuing. Breakpoint 3, end () at ../.././../git/gdb/testsuite/gdb.trace/circ.c:72 72 } (gdb) tstop (gdb) tfind start Found trace frame 0, tracepoint 1 #0 func0 () at ../.././../git/gdb/testsuite/gdb.trace/circ.c:28 28 } (gdb) tfind Found trace frame 1, tracepoint 2 32 } (gdb) When we don't have info about the stack available (UNWIND_UNAVAILABLE), frames end up with outer_frame_id as frame ID. And in the scenario above, the issue is that both frames before and after the second tfind (the frames for func0 an func1) have the same id (outer_frame_id), so the frame_id_eq check returns false, even though the frames were of different functions. GDB knows that, because the PC is inferred from the tracepoint's address, even if no registers were collected. To fix this, this patch adds support for frame ids with a valid code address, but <unavailable> stack address, and then makes the unwinders use that instead of the catch-all outer_frame_id for such frames. The frame_id_eq check in tfind_1 then automatically does the right thing as expected. I tested with --directory=gdb.trace/ , before/after the patch, and compared the resulting gdb.logs, then adjusted the tests to expect the extra output that came out. Turns out that was only circ.exp, the original test that actually brought this issue to light. Tested on x86_64 Fedora 17, native and gdbserver. gdb/ 2013-12-17 Pedro Alves <palves@redhat.com> * frame.h (enum frame_id_stack_status): New enum. (struct frame_id) <stack_addr>: Adjust comment. <stack_addr_p>: Delete field, replaced with ... <stack_status>: ... this new field. (frame_id_build_unavailable_stack): Declare. * frame.c (frame_addr_hash, fprint_field, outer_frame_id) (frame_id_build_special): Adjust. (frame_id_build_unavailable_stack): New function. (frame_id_build, frame_id_build_wild): Adjust. (frame_id_p, frame_id_eq, frame_id_inner): Adjust to take into account frames with unavailable stack. * amd64-tdep.c (amd64_frame_this_id) (amd64_sigtramp_frame_this_id, amd64_epilogue_frame_this_id): Use frame_id_build_unavailable_stack. * dwarf2-frame.c (dwarf2_frame_this_id): Likewise. * i386-tdep.c (i386_frame_this_id, i386_epilogue_frame_this_id) (i386_sigtramp_frame_this_id): Likewise. gdb/testsuite/ 2013-12-17 Pedro Alves <palves@redhat.com> * gdb.trace/circ.exp: Expect frame info to be printed when switching between frames with unavailable stack, but different functions.
2013-12-17 21:47:36 +01:00
This field is valid only if frame_id.stack_status is
FID_STACK_VALID. It will be 0 for other
FID_STACK_... statuses. */
CORE_ADDR stack_addr;
/* The frame's code address. This shall be constant through out the
lifetime of the frame. While the PC (a.k.a. resume address)
changes as the function is executed, this code address cannot.
Typically, it is set to the address of the entry point of the
frame's function (as returned by get_frame_func).
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
For inlined functions (INLINE_DEPTH != 0), this is the address of
the first executed instruction in the block corresponding to the
inlined function.
This field is valid only if code_addr_p is true. Otherwise, this
frame is considered to have a wildcard code address, i.e. one that
matches every address value in frame comparisons. */
CORE_ADDR code_addr;
/* The frame's special address. This shall be constant through out the
lifetime of the frame. This is used for architectures that may have
frames that do not change the stack but are still distinct and have
some form of distinct identifier (e.g. the ia64 which uses a 2nd
stack for registers). This field is treated as unordered - i.e. will
not be used in frame ordering comparisons.
This field is valid only if special_addr_p is true. Otherwise, this
frame is considered to have a wildcard special address, i.e. one that
matches every address value in frame comparisons. */
CORE_ADDR special_addr;
/* Flags to indicate the above fields have valid contents. */
Distinguish sentinel frame from null frame. This patch replaces the `current_frame' static global in frame.c with `sentinel_frame'. It also makes the sentinel frame id unique and different from the null frame. By itself, there is not much point to this patch, but it makes the code cleaner for the VALUE_FRAME_ID changes in another patch. Since we now allow "navigation" to the sentinel frame, it removes the necessity of adding special cases to other parts of GDB. Note that a new function, get_next_frame_sentinel_okay, is introduced in this patch. It will be used by the VALUE_FRAME_ID changes that I've made. Thanks to Pedro Alves for this suggestion. gdb/ChangeLog: * frame.h (enum frame_id_stack_status): Add FID_STACK_SENTINEL. (struct frame_id): Increase number of bits required for storing stack status to 3 from 2. (sentinel_frame_id): New declaration. (get_next_frame_sentinel_okay): Declare. (frame_find_by_id_sentinel_okay): Declare. * frame.c (current_frame): Rename this static global to... (sentinel_frame): ...this static global, which has also been moved an earlier location in the file. (fprint_frame_id): Add case for sentinel frame id. (get_frame_id): Return early for sentinel frame. (sentinel_frame_id): Define. (frame_find_by_id): Add case for sentinel_frame_id. (create_sentinel_frame): Use sentinel_frame_id for this_id.value instead of null_frame_id. (get_current_frame): Add local declaration for `current_frame'. Remove local declaration for `sentinel_frame.' (get_next_frame_sentinel_okay): New function. (reinit_frame_cache): Use `sentinel_frame' in place of `current_frame'.
2016-09-28 05:33:38 +02:00
ENUM_BITFIELD(frame_id_stack_status) stack_status : 3;
unsigned int code_addr_p : 1;
unsigned int special_addr_p : 1;
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
/* It is non-zero for a frame made up by GDB without stack data
representation in inferior, such as INLINE_FRAME or TAILCALL_FRAME.
Caller of inlined function will have it zero, each more inner called frame
will have it increasingly one, two etc. Similarly for TAILCALL_FRAME. */
int artificial_depth;
};
/* Save and restore the currently selected frame. */
class scoped_restore_selected_frame
{
public:
/* Save the currently selected frame. */
scoped_restore_selected_frame ();
/* Restore the currently selected frame. */
~scoped_restore_selected_frame ();
DISABLE_COPY_AND_ASSIGN (scoped_restore_selected_frame);
private:
/* The ID of the previously selected frame. */
struct frame_id m_fid;
};
/* Methods for constructing and comparing Frame IDs. */
/* For convenience. All fields are zero. This means "there is no frame". */
extern const struct frame_id null_frame_id;
Distinguish sentinel frame from null frame. This patch replaces the `current_frame' static global in frame.c with `sentinel_frame'. It also makes the sentinel frame id unique and different from the null frame. By itself, there is not much point to this patch, but it makes the code cleaner for the VALUE_FRAME_ID changes in another patch. Since we now allow "navigation" to the sentinel frame, it removes the necessity of adding special cases to other parts of GDB. Note that a new function, get_next_frame_sentinel_okay, is introduced in this patch. It will be used by the VALUE_FRAME_ID changes that I've made. Thanks to Pedro Alves for this suggestion. gdb/ChangeLog: * frame.h (enum frame_id_stack_status): Add FID_STACK_SENTINEL. (struct frame_id): Increase number of bits required for storing stack status to 3 from 2. (sentinel_frame_id): New declaration. (get_next_frame_sentinel_okay): Declare. (frame_find_by_id_sentinel_okay): Declare. * frame.c (current_frame): Rename this static global to... (sentinel_frame): ...this static global, which has also been moved an earlier location in the file. (fprint_frame_id): Add case for sentinel frame id. (get_frame_id): Return early for sentinel frame. (sentinel_frame_id): Define. (frame_find_by_id): Add case for sentinel_frame_id. (create_sentinel_frame): Use sentinel_frame_id for this_id.value instead of null_frame_id. (get_current_frame): Add local declaration for `current_frame'. Remove local declaration for `sentinel_frame.' (get_next_frame_sentinel_okay): New function. (reinit_frame_cache): Use `sentinel_frame' in place of `current_frame'.
2016-09-28 05:33:38 +02:00
/* Sentinel frame. */
extern const struct frame_id sentinel_frame_id;
/* This means "there is no frame ID, but there is a frame". It should be
replaced by best-effort frame IDs for the outermost frame, somehow.
The implementation is only special_addr_p set. */
extern const struct frame_id outer_frame_id;
Convert frame unwinders to use the current frame and "struct value". * frame.c (frame_debug): Make global. (get_frame_id): Pass this frame to unwinder routines. (frame_pc_unwind): Remove unused unwind->prev_pc support. (do_frame_register_read): Do not discard the return value of frame_register_read. (frame_register_unwind): Remove debug messages. Use frame_unwind_register_value. (frame_unwind_register_value, get_frame_register_value): New functions. (create_new_frame, get_frame_base_address, get_frame_locals_address) (get_frame_args_address, get_frame_type): Pass this frame to unwinder routines. (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New functions. * frame.h: Update comments. (frame_debug, frame_unwind_register_value, get_frame_register_value) (frame_prepare_for_sniffer): Declare. * frame-unwind.h: Update comments and parameter names. (default_frame_sniffer): Declare. (frame_prev_register_ftype): Return a struct value *. (struct frame_unwind): Remove prev_pc member. (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): Declare. * frame-base.h: Update comments and parameter names. * valops.c (value_fetch_lazy): Use get_frame_register_value. Iterate if necessary. Add debugging output. * sentinel-frame.c (sentinel_frame_prev_register) (sentinel_frame_this_id): Update for new signature. (sentinel_frame_prev_pc): Delete. (sentinel_frame_unwinder): Remove prev_pc. * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize prev_pc. * libunwind-frame.c (libunwind_frame_unwind): Likewise. * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer. (frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder): New function. (frame_unwind_find_by_frame): Take this frame. Only use sniffers from unwinders. Use frame_prepare_for_sniffer. (default_frame_sniffer, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): New functions. * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id. (dummy_frame_prev_register, dummy_frame_this_id): Update for new signature. * gdbarch.sh: Replace unwind_dummy_id with dummy_id. * gdbarch.c, gdbarch.c: Regenerated. * frame-base.c (default_frame_base_address) (default_frame_locals_address, default_frame_args_address): Update for new signature. (frame_base_find_by_frame): Pass this frame to unwinder routines. * infcall.c (call_function_by_hand): Update comments. * Makefile.in (frame-unwind.o): Update dependencies. * gdbint.texinfo (Stack Frames): New chapter. (Algorithms): Move Frames text to the new chapter. (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS. Document gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
2008-04-30 23:16:46 +02:00
/* Flag to control debugging. */
gdb/ * dwarf2loc.c (entry_values_debug): Add 'unsigned'. (_initialize_dwarf2loc): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * dwarf2loc.h: Update the declaration of 'entry_values_debug'. * dwarf2read.c (dwarf2_die_debug): Add 'unsigned'. (_initialize_dwarf2_read): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * darwin-nat.c (dwarwin_debug_flag): Add 'unsigned'. (_initialize_darwin_inferior): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * frame.c (frame_debug): Add 'unsigned'. (_intialize_frame): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * frame.h: Update the declaration of 'frame_debug'. * gdbtypes.c (overload_debug): Add 'unsigned'. (_initialize_gdbtypes): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * inferior.h: Update declaration of 'debug_infrun'. * infrun.c (debug_infrun): Add 'unsigned'. (_initialize_infrun): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * jit.c (jit_debug): Add 'unsigned'. (_initialize_jit): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * linux-nat.c (debug_linux_nat): Add 'unsigned'. (_initialize_linux_nat): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * linux-thread-db.c (libthread_db_debug): Add 'unsigned'. (_initialize_thread_db): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * machoread.c (mach_o_debug_level): Add 'unsigned'. (_initialize_machoread): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * mi/mi-cmd-var.c: Update the declaration of 'varobjdebug'. * microblaze-tdep.c (microblaze_debug_flag): Add 'unsigned'. (_initialize_microblaze_tdep): Call add_setshow_zuinteger_cmd intead of add_setshow_zinteger_cmd. * mips-tdep.c (mips_debug): Add 'unsigned'. (_initialize_mips_tdep): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * monitor.c (monitor_debug): Add 'unsigned'. (_initialize_remote_monitors): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * observer.c (observer_debug): Add 'unsigned'. (_initialize_observer): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * parse.c (expressiondebug): Add 'unsigned'. (_initialize_parse): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * record.c (record_debug): Add 'unsigned'. (_initialize_record): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * record.h: Update the declaration of 'record_debug'. * stap-probe.c (stap_expression_debug): Add 'unsigned'. (_initialize_stap_probe): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * serial.c (global_serial_debug_p): Add 'unsigned'. (_initialize_serial): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * solib-dsbt.c (solib_dsbt_debug): Add 'unsigned'. (_initialize_dsbt_solib): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * solib-frv.c (solib_frv_debug): Add 'unsigned'. (_initialize_frv_solib): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * target.c (targetdebug): Add 'unsigned'. (initialize_targets): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * valops.c (overload_debug): Add 'unsigned'. * varobj.c (varobjdebug): Add 'unsigned'. (_initialize_varobj): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * xtensa-tdep.c (xtensa_debug_level): Add 'unsigned'. (_initialize_xtensa_tdep): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * arch-utils.h: Remove the declaration of 'gdbarch_debug'. * gdbarch.sh (gdbarch_debug): Add 'unsigned'. (extern void _initialize_gdbarch): Call add_setshow_zuinteger_cmd instead of add_setshow_zinteger_cmd. * gdbarch.c, gdbarch.h: Re-generated.
2012-08-02 11:36:40 +02:00
extern unsigned int frame_debug;
Convert frame unwinders to use the current frame and "struct value". * frame.c (frame_debug): Make global. (get_frame_id): Pass this frame to unwinder routines. (frame_pc_unwind): Remove unused unwind->prev_pc support. (do_frame_register_read): Do not discard the return value of frame_register_read. (frame_register_unwind): Remove debug messages. Use frame_unwind_register_value. (frame_unwind_register_value, get_frame_register_value): New functions. (create_new_frame, get_frame_base_address, get_frame_locals_address) (get_frame_args_address, get_frame_type): Pass this frame to unwinder routines. (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New functions. * frame.h: Update comments. (frame_debug, frame_unwind_register_value, get_frame_register_value) (frame_prepare_for_sniffer): Declare. * frame-unwind.h: Update comments and parameter names. (default_frame_sniffer): Declare. (frame_prev_register_ftype): Return a struct value *. (struct frame_unwind): Remove prev_pc member. (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): Declare. * frame-base.h: Update comments and parameter names. * valops.c (value_fetch_lazy): Use get_frame_register_value. Iterate if necessary. Add debugging output. * sentinel-frame.c (sentinel_frame_prev_register) (sentinel_frame_this_id): Update for new signature. (sentinel_frame_prev_pc): Delete. (sentinel_frame_unwinder): Remove prev_pc. * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize prev_pc. * libunwind-frame.c (libunwind_frame_unwind): Likewise. * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer. (frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder): New function. (frame_unwind_find_by_frame): Take this frame. Only use sniffers from unwinders. Use frame_prepare_for_sniffer. (default_frame_sniffer, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): New functions. * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id. (dummy_frame_prev_register, dummy_frame_this_id): Update for new signature. * gdbarch.sh: Replace unwind_dummy_id with dummy_id. * gdbarch.c, gdbarch.c: Regenerated. * frame-base.c (default_frame_base_address) (default_frame_locals_address, default_frame_args_address): Update for new signature. (frame_base_find_by_frame): Pass this frame to unwinder routines. * infcall.c (call_function_by_hand): Update comments. * Makefile.in (frame-unwind.o): Update dependencies. * gdbint.texinfo (Stack Frames): New chapter. (Algorithms): Move Frames text to the new chapter. (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS. Document gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
2008-04-30 23:16:46 +02:00
/* Construct a frame ID. The first parameter is the frame's constant
stack address (typically the outer-bound), and the second the
frame's constant code address (typically the entry point).
The special identifier address is set to indicate a wild card. */
extern struct frame_id frame_id_build (CORE_ADDR stack_addr,
CORE_ADDR code_addr);
/* Construct a special frame ID. The first parameter is the frame's constant
stack address (typically the outer-bound), the second is the
frame's constant code address (typically the entry point),
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-07 20:36:19 +01:00
and the third parameter is the frame's special identifier address. */
extern struct frame_id frame_id_build_special (CORE_ADDR stack_addr,
CORE_ADDR code_addr,
CORE_ADDR special_addr);
"tfind" across unavailable-stack frames. Like when stepping, the current stack frame location is expected to be printed as result of tfind command, if that results in moving to a different function. In tfind_1 we see: if (from_tty && (has_stack_frames () || traceframe_number >= 0)) { enum print_what print_what; /* NOTE: in imitation of the step command, try to determine whether we have made a transition from one function to another. If so, we'll print the "stack frame" (ie. the new function and it's arguments) -- otherwise we'll just show the new source line. */ if (frame_id_eq (old_frame_id, get_frame_id (get_current_frame ()))) print_what = SRC_LINE; else print_what = SRC_AND_LOC; print_stack_frame (get_selected_frame (NULL), 1, print_what, 1); do_displays (); } However, when we haven't collected any registers in the tracepoint (collect $regs), that doesn't actually work: (gdb) tstart (gdb) info tracepoints Num Type Disp Enb Address What 1 tracepoint keep y 0x080483b7 in func0 at ../.././../git/gdb/testsuite/gdb.trace/circ.c:28 collect testload installed on target 2 tracepoint keep y 0x080483bc in func1 at ../.././../git/gdb/testsuite/gdb.trace/circ.c:32 collect testload installed on target (gdb) c Continuing. Breakpoint 3, end () at ../.././../git/gdb/testsuite/gdb.trace/circ.c:72 72 } (gdb) tstop (gdb) tfind start Found trace frame 0, tracepoint 1 #0 func0 () at ../.././../git/gdb/testsuite/gdb.trace/circ.c:28 28 } (gdb) tfind Found trace frame 1, tracepoint 2 32 } (gdb) When we don't have info about the stack available (UNWIND_UNAVAILABLE), frames end up with outer_frame_id as frame ID. And in the scenario above, the issue is that both frames before and after the second tfind (the frames for func0 an func1) have the same id (outer_frame_id), so the frame_id_eq check returns false, even though the frames were of different functions. GDB knows that, because the PC is inferred from the tracepoint's address, even if no registers were collected. To fix this, this patch adds support for frame ids with a valid code address, but <unavailable> stack address, and then makes the unwinders use that instead of the catch-all outer_frame_id for such frames. The frame_id_eq check in tfind_1 then automatically does the right thing as expected. I tested with --directory=gdb.trace/ , before/after the patch, and compared the resulting gdb.logs, then adjusted the tests to expect the extra output that came out. Turns out that was only circ.exp, the original test that actually brought this issue to light. Tested on x86_64 Fedora 17, native and gdbserver. gdb/ 2013-12-17 Pedro Alves <palves@redhat.com> * frame.h (enum frame_id_stack_status): New enum. (struct frame_id) <stack_addr>: Adjust comment. <stack_addr_p>: Delete field, replaced with ... <stack_status>: ... this new field. (frame_id_build_unavailable_stack): Declare. * frame.c (frame_addr_hash, fprint_field, outer_frame_id) (frame_id_build_special): Adjust. (frame_id_build_unavailable_stack): New function. (frame_id_build, frame_id_build_wild): Adjust. (frame_id_p, frame_id_eq, frame_id_inner): Adjust to take into account frames with unavailable stack. * amd64-tdep.c (amd64_frame_this_id) (amd64_sigtramp_frame_this_id, amd64_epilogue_frame_this_id): Use frame_id_build_unavailable_stack. * dwarf2-frame.c (dwarf2_frame_this_id): Likewise. * i386-tdep.c (i386_frame_this_id, i386_epilogue_frame_this_id) (i386_sigtramp_frame_this_id): Likewise. gdb/testsuite/ 2013-12-17 Pedro Alves <palves@redhat.com> * gdb.trace/circ.exp: Expect frame info to be printed when switching between frames with unavailable stack, but different functions.
2013-12-17 21:47:36 +01:00
/* Construct a frame ID representing a frame where the stack address
exists, but is unavailable. CODE_ADDR is the frame's constant code
address (typically the entry point). The special identifier
address is set to indicate a wild card. */
extern struct frame_id frame_id_build_unavailable_stack (CORE_ADDR code_addr);
/* Construct a frame ID representing a frame where the stack address
exists, but is unavailable. CODE_ADDR is the frame's constant code
address (typically the entry point). SPECIAL_ADDR is the special
identifier address. */
extern struct frame_id
frame_id_build_unavailable_stack_special (CORE_ADDR code_addr,
CORE_ADDR special_addr);
/* Construct a wild card frame ID. The parameter is the frame's constant
stack address (typically the outer-bound). The code address as well
as the special identifier address are set to indicate wild cards. */
extern struct frame_id frame_id_build_wild (CORE_ADDR stack_addr);
/* Returns non-zero when L is a valid frame (a valid frame has a
non-zero .base). The outermost frame is valid even without an
ID. */
extern int frame_id_p (struct frame_id l);
/* Returns non-zero when L is a valid frame representing a frame made up by GDB
without stack data representation in inferior, such as INLINE_FRAME or
TAILCALL_FRAME. */
extern int frame_id_artificial_p (struct frame_id l);
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
/* Returns non-zero when L and R identify the same frame, or, if
either L or R have a zero .func, then the same frame base. */
extern int frame_id_eq (struct frame_id l, struct frame_id r);
/* Write the internal representation of a frame ID on the specified
stream. */
extern void fprint_frame_id (struct ui_file *file, struct frame_id id);
/* Frame types. Some are real, some are signal trampolines, and some
are completely artificial (dummy). */
enum frame_type
{
/* A true stack frame, created by the target program during normal
execution. */
NORMAL_FRAME,
/* A fake frame, created by GDB when performing an inferior function
call. */
DUMMY_FRAME,
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
/* A frame representing an inlined function, associated with an
upcoming (prev, outer, older) NORMAL_FRAME. */
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
INLINE_FRAME,
gdb/ Recognize virtual tail call frames. * Makefile.in (SFILES): Add dwarf2-frame-tailcall.c. (HFILES_NO_SRCDIR): Add dwarf2-frame-tailcall.h. (COMMON_OBS): Add dwarf2-frame-tailcall.o. * dwarf2-frame-tailcall.c: New file. * dwarf2-frame-tailcall.h: New file. * dwarf2-frame.c: Include dwarf2-frame-tailcall.h. (execute_cfa_program): New function comment. Return INSN_PTR. Reset REGS.PREV only after CIE execution. (struct dwarf2_frame_cache): New field tailcall_cache. (dwarf2_frame_cache): New variables entry_pc, entry_cfa_sp_offset, entry_cfa_sp_offset_p and instr. Execute FDE instructions in two parts, try to find entry_cfa_sp_offset. Call dwarf2_tailcall_sniffer_first. (dwarf2_frame_prev_register): Call dwarf2_tailcall_prev_register_first when appropriate. (dwarf2_frame_dealloc_cache): New function. (dwarf2_frame_sniffer): Preinitialize cache by dwarf2_frame_cache. (dwarf2_frame_unwind): Install dwarf2_frame_dealloc_cache. (dwarf2_signal_frame_unwind): Do not install dwarf2_frame_dealloc_cache. (dwarf2_append_unwinders): Add dwarf2_tailcall_frame_unwind. (dwarf2_frame_cfa): Support also dwarf2_tailcall_frame_unwind. * dwarf2loc.c (func_addr_to_tail_call_list) (tailcall_dump, call_sitep, VEC (call_sitep), chain_candidate) (call_site_find_chain_1, call_site_find_chain): New. * dwarf2loc.h (struct call_site_chain): New. (call_site_find_chain): New declaration. * frame.c (get_frame_address_in_block): Support also TAILCALL_FRAME. * frame.h (enum frame_type): New entry TAILCALL_FRAME. * python/py-frame.c (gdbpy_initialize_frames): Add TAILCALL_FRAME. * stack.c (frame_info): Support also TAILCALL_FRAME. gdb/doc/ Recognize virtual tail call frames. * gdb.texinfo (Optimized Code): Add reference to Tail Call Frames. (Tail Call Frames): New node. (Frames In Python): Add gdb.TAILCALL_FRAME. gdb/testsuite/ Recognize virtual tail call frames. * gdb.arch/amd64-entry-value.cc (c, a, b, amb_z, amb_y, amb_x, amb) (amb_b, amb_a): New. (main): Call a and b. * gdb.arch/amd64-entry-value.exp (tailcall: breakhere, tailcall: bt) (tailcall: p i, tailcall: p j, set $sp0=$sp, up, p $sp0 == $sp, frame 3) (p $sp0 + sizeof (void *) == $sp, ambiguous: breakhere, ambiguous: bt): New tests.
2011-10-09 21:26:44 +02:00
/* A virtual frame of a tail call - see dwarf2_tailcall_frame_unwind. */
TAILCALL_FRAME,
/* In a signal handler, various OSs handle this in various ways.
The main thing is that the frame may be far from normal. */
SIGTRAMP_FRAME,
/* Fake frame representing a cross-architecture call. */
ARCH_FRAME,
/* Sentinel or registers frame. This frame obtains register values
direct from the inferior's registers. */
SENTINEL_FRAME
};
/* For every stopped thread, GDB tracks two frames: current and
selected. Current frame is the inner most frame of the selected
thread. Selected frame is the one being examined by the GDB
CLI (selected using `up', `down', ...). The frames are created
on-demand (via get_prev_frame()) and then held in a frame cache. */
/* FIXME: cagney/2002-11-28: Er, there is a lie here. If you do the
sequence: `thread 1; up; thread 2; thread 1' you lose thread 1's
selected frame. At present GDB only tracks the selected frame of
the current thread. But be warned, that might change. */
/* FIXME: cagney/2002-11-14: At any time, only one thread's selected
and current frame can be active. Switching threads causes gdb to
discard all that cached frame information. Ulgh! Instead, current
and selected frame should be bound to a thread. */
/* On demand, create the inner most frame using information found in
the inferior. If the inner most frame can't be created, throw an
error. */
extern struct frame_info *get_current_frame (void);
/* Does the current target interface have enough state to be able to
query the current inferior for frame info, and is the inferior in a
state where that is possible? */
extern int has_stack_frames (void);
/* Invalidates the frame cache (this function should have been called
invalidate_cached_frames).
FIXME: cagney/2002-11-28: There should be two methods: one that
reverts the thread's selected frame back to current frame (for when
the inferior resumes) and one that does not (for when the user
modifies the target invalidating the frame cache). */
extern void reinit_frame_cache (void);
/* On demand, create the selected frame and then return it. If the
selected frame can not be created, this function prints then throws
an error. When MESSAGE is non-NULL, use it for the error message,
otherwize use a generic error message. */
/* FIXME: cagney/2002-11-28: At present, when there is no selected
frame, this function always returns the current (inner most) frame.
It should instead, when a thread has previously had its frame
selected (but not resumed) and the frame cache invalidated, find
and then return that thread's previously selected frame. */
extern struct frame_info *get_selected_frame (const char *message);
/* If there is a selected frame, return it. Otherwise, return NULL. */
extern struct frame_info *get_selected_frame_if_set (void);
/* Select a specific frame. NULL, apparently implies re-select the
inner most frame. */
extern void select_frame (struct frame_info *);
/* Given a FRAME, return the next (more inner, younger) or previous
(more outer, older) frame. */
extern struct frame_info *get_prev_frame (struct frame_info *);
extern struct frame_info *get_next_frame (struct frame_info *);
Distinguish sentinel frame from null frame. This patch replaces the `current_frame' static global in frame.c with `sentinel_frame'. It also makes the sentinel frame id unique and different from the null frame. By itself, there is not much point to this patch, but it makes the code cleaner for the VALUE_FRAME_ID changes in another patch. Since we now allow "navigation" to the sentinel frame, it removes the necessity of adding special cases to other parts of GDB. Note that a new function, get_next_frame_sentinel_okay, is introduced in this patch. It will be used by the VALUE_FRAME_ID changes that I've made. Thanks to Pedro Alves for this suggestion. gdb/ChangeLog: * frame.h (enum frame_id_stack_status): Add FID_STACK_SENTINEL. (struct frame_id): Increase number of bits required for storing stack status to 3 from 2. (sentinel_frame_id): New declaration. (get_next_frame_sentinel_okay): Declare. (frame_find_by_id_sentinel_okay): Declare. * frame.c (current_frame): Rename this static global to... (sentinel_frame): ...this static global, which has also been moved an earlier location in the file. (fprint_frame_id): Add case for sentinel frame id. (get_frame_id): Return early for sentinel frame. (sentinel_frame_id): Define. (frame_find_by_id): Add case for sentinel_frame_id. (create_sentinel_frame): Use sentinel_frame_id for this_id.value instead of null_frame_id. (get_current_frame): Add local declaration for `current_frame'. Remove local declaration for `sentinel_frame.' (get_next_frame_sentinel_okay): New function. (reinit_frame_cache): Use `sentinel_frame' in place of `current_frame'.
2016-09-28 05:33:38 +02:00
/* Like get_next_frame(), but allows return of the sentinel frame. NULL
is never returned. */
extern struct frame_info *get_next_frame_sentinel_okay (struct frame_info *);
Fix PR backtrace/15558 This PR is about an assertion failure in GDB that can be triggered by setting "backtrace limit" to a value that causes GDB to stop unwinding after an inline frame. In this case, an assertion in inline_frame_this_id will trigger: /* We need a valid frame ID, so we need to be based on a valid frame. (...). */ gdb_assert (frame_id_p (*this_id)); Looking at the function: static void inline_frame_this_id (struct frame_info *this_frame, void **this_cache, struct frame_id *this_id) { struct symbol *func; /* In order to have a stable frame ID for a given inline function, we must get the stack / special addresses from the underlying real frame's this_id method. So we must call get_prev_frame. Because we are inlined into some function, there must be previous frames, so this is safe - as long as we're careful not to create any cycles. */ *this_id = get_frame_id (get_prev_frame (this_frame)); we see we're computing the frame id for the inline frame. If this is an inline frame, which is a virtual frame constructed based on debug info, on top of a real stack frame, we should _always_ be able to find where the frame was inlined into, as that ultimately just means peeling off the virtual frames on top of the real stack frame. If there ultimately was no prev (real) stack frame, then we wouldn't have been able to construct the inline frame either, by design. That's what the assertion catches. So we have an inline frame, we should _always_ be able to compute its ID, even if that means bypassing the user backtrace limits to get at the real stack frame's info. The problem is that inline_frame_id calls get_prev_frame, and that takes user backtrace limits into account. Code that wants to bypass the limits calls get_prev_frame_1 instead. Note how get_prev_frame_1 already skips all checks for inline frames: /* If we are unwinding from an inline frame, all of the below tests were already performed when we unwound from the next non-inline frame. We must skip them, since we can not get THIS_FRAME's ID until we have unwound all the way down to the previous non-inline frame. */ if (get_frame_type (this_frame) == INLINE_FRAME) return get_prev_frame_if_no_cycle (this_frame); And note how the related frame_unwind_caller_id function also uses get_prev_frame_1: struct frame_id frame_unwind_caller_id (struct frame_info *next_frame) { struct frame_info *this_frame; /* Use get_prev_frame_1, and not get_prev_frame. The latter will truncate the frame chain, leading to this function unintentionally returning a null_frame_id (e.g., when a caller requests the frame ID of "main()"s caller. */ next_frame = skip_artificial_frames (next_frame); this_frame = get_prev_frame_1 (next_frame); if (this_frame) return get_frame_id (skip_artificial_frames (this_frame)); else return null_frame_id; } get_prev_frame_1 is currently static in frame.c. As a _1 suffix is not a good name for an extern function, I've renamed it. Tested on x86-64 Fedora 17. gdb/ 2014-04-18 Pedro alves <palves@redhat.com> Tom Tromey <tromey@redhat.com> PR backtrace/15558 * frame.c (get_prev_frame_1): Rename to ... (get_prev_frame_always): ... this, and make extern. Adjust. (skip_artificial_frames): Use get_prev_frame_always. (frame_unwind_caller_id, frame_pop, get_prev_frame) (get_frame_unwind_stop_reason): Adjust to rename. * frame.h (get_prev_frame_always): Declare. * inline-frame.c: Include frame.h. (inline_frame_this_id): Use get_prev_frame_always. gdb/testsuite/ 2014-04-18 Tom Tromey <palves@redhat.com> Pedro alves <tromey@redhat.com> PR backtrace/15558 * gdb.opt/inline-bt.exp: Test backtracing from an inline function with a backtrace limit. * gdb.python/py-frame-inline.exp: Test running to an inline function with a backtrace limit, and printing the newest frame. * gdb.python/py-frame-inline.c (main): Call f.
2014-04-18 11:15:21 +02:00
/* Return a "struct frame_info" corresponding to the frame that called
THIS_FRAME. Returns NULL if there is no such frame.
Unlike get_prev_frame, this function always tries to unwind the
frame. */
extern struct frame_info *get_prev_frame_always (struct frame_info *);
/* Given a frame's ID, relocate the frame. Returns NULL if the frame
is not found. */
extern struct frame_info *frame_find_by_id (struct frame_id id);
Change meaning of VALUE_FRAME_ID; rename to VALUE_NEXT_FRAME_ID The VALUE_FRAME_ID macro provides access to a member in struct value that's used to hold the frame id that's used when determining a register's value or when assigning to a register. The underlying member has a long and obscure name. I won't refer to it here, but will simply refer to VALUE_FRAME_ID as if it's the struct value member instead of being a convenient macro. At the moment, without this patch in place, VALUE_FRAME_ID is set in value_of_register_lazy() and several other locations to hold the frame id of the frame passed to those functions. VALUE_FRAME_ID is used in the lval_register case of value_fetch_lazy(). To fetch the register's value, it calls get_frame_register_value() which, in turn, calls frame_unwind_register_value() with frame->next. A python based unwinder may wish to determine the value of a register or evaluate an expression containing a register. When it does this, value_fetch_lazy() will be called under some circumstances. It will attempt to determine the frame id associated with the frame passed to it. In so doing, it will end up back in the frame sniffer of the very same python unwinder that's attempting to learn the value of a register as part of the sniffing operation. This recursion is not desirable. As noted above, when value_fetch_lazy() wants to fetch a register's value, it does so (indirectly) by unwinding from frame->next. With this in mind, a solution suggests itself: Change VALUE_FRAME_ID to hold the frame id associated with the next frame. Then, when it comes time to obtain the value associated with the register, we can simply unwind from the frame corresponding to the frame id stored in VALUE_FRAME_ID. This neatly avoids the python unwinder recursion problem by changing when the "next" operation occurs. Instead of the "next" operation occuring when the register value is fetched, it occurs earlier on when assigning a frame id to VALUE_FRAME_ID. (Thanks to Pedro for this suggestion.) This patch implements this idea. It builds on the patch "Distinguish sentinel frame from null frame". Without that work in place, it's necessary to check for null_id at several places and then obtain the sentinel frame. It also renames most occurences of VALUE_FRAME_ID to VALUE_NEXT_FRAME_ID to reflect the new meaning of this field. There are several uses of VALUE_FRAME_ID which were not changed. In each case, the original meaning of VALUE_FRAME_ID is required to get correct results. In all but one of these uses, either put_frame_register_bytes() or get_frame_register_bytes() is being called with the frame value obtained from VALUE_FRAME_ID. Both of these functions perform some unwinding by performing a "->next" operation on the frame passed to it. If we were to use the new VALUE_NEXT_FRAME_ID macro, this would effectively do two "->next" operations, which is not what we want. The VALUE_FRAME_ID macro has been redefined in terms of VALUE_NEXT_FRAME_ID. It simply fetches the previous frame's id, providing this id as the value of the macro. gdb/ChangeLog: * value.h (VALUE_FRAME_ID): Rename to VALUE_NEXT_FRAME_ID. Update comment. Create new VALUE_FRAME_ID which is defined in terms of VALUE_NEXT_FRAME_ID. (deprecated_value_frame_id_hack): Rename to deprecated_value_next_frame_id_hack. * dwarf2loc.c, findvar.c, frame-unwind.c, sentinel-frame.c, valarith.c, valops.c, value.c: Adjust nearly all occurences of VALUE_FRAME_ID to VALUE_NEXT_FRAME_ID. Add comments for those which did not change. * value.c (struct value): Rename frame_id field to next_frame_id. Update comment. (deprecated_value_frame_id_hack): Rename to deprecated_value_next_frame_id_hack. (value_fetch_lazy): Call frame_unwind_register_value() instead of get_frame_register_value(). * frame.c (get_prev_frame_id_by_id): New function. * frame.h (get_prev_frame_id_by_id): Declare. * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Make VALUE_NEXT_FRAME_ID refer to the next frame. * findvar.c (value_of_register_lazy): Likewise. (default_value_from_register): Likewise. (value_from_register): Likewise. * frame_unwind.c (frame_unwind_got_optimized): Likewise. * sentinel-frame.c (sentinel_frame_prev_register): Likewise. * value.h (VALUE_FRAME_ID): Update comment describing this macro.
2016-09-28 06:18:44 +02:00
/* Given a frame's ID, find the previous frame's ID. Returns null_frame_id
if the frame is not found. */
extern struct frame_id get_prev_frame_id_by_id (struct frame_id id);
/* Base attributes of a frame: */
/* The frame's `resume' address. Where the program will resume in
this frame.
This replaced: frame->pc; */
extern CORE_ADDR get_frame_pc (struct frame_info *);
/* Same as get_frame_pc, but return a boolean indication of whether
the PC is actually available, instead of throwing an error. */
extern int get_frame_pc_if_available (struct frame_info *frame,
CORE_ADDR *pc);
/* An address (not necessarily aligned to an instruction boundary)
that falls within THIS frame's code block.
When a function call is the last statement in a block, the return
address for the call may land at the start of the next block.
Similarly, if a no-return function call is the last statement in
the function, the return address may end up pointing beyond the
function, and possibly at the start of the next function.
These methods make an allowance for this. For call frames, this
function returns the frame's PC-1 which "should" be an address in
the frame's block. */
extern CORE_ADDR get_frame_address_in_block (struct frame_info *this_frame);
/* Same as get_frame_address_in_block, but returns a boolean
indication of whether the frame address is determinable (when the
PC is unavailable, it will not be), instead of possibly throwing an
error trying to read an unavailable PC. */
extern int
get_frame_address_in_block_if_available (struct frame_info *this_frame,
CORE_ADDR *pc);
/* The frame's inner-most bound. AKA the stack-pointer. Confusingly
known as top-of-stack. */
extern CORE_ADDR get_frame_sp (struct frame_info *);
/* Following on from the `resume' address. Return the entry point
address of the function containing that resume address, or zero if
that function isn't known. */
extern CORE_ADDR get_frame_func (struct frame_info *fi);
/* Same as get_frame_func, but returns a boolean indication of whether
the frame function is determinable (when the PC is unavailable, it
will not be), instead of possibly throwing an error trying to read
an unavailable PC. */
extern int get_frame_func_if_available (struct frame_info *fi, CORE_ADDR *);
/* Closely related to the resume address, various symbol table
attributes that are determined by the PC. Note that for a normal
frame, the PC refers to the resume address after the return, and
not the call instruction. In such a case, the address is adjusted
so that it (approximately) identifies the call site (and not the
return site).
NOTE: cagney/2002-11-28: The frame cache could be used to cache the
computed value. Working on the assumption that the bottle-neck is
in the single step code, and that code causes the frame cache to be
constantly flushed, caching things in a frame is probably of little
benefit. As they say `show us the numbers'.
NOTE: cagney/2002-11-28: Plenty more where this one came from:
find_frame_block(), find_frame_partial_function(),
find_frame_symtab(), find_frame_function(). Each will need to be
carefully considered to determine if the real intent was for it to
apply to the PC or the adjusted PC. */
Kill init_sal Instead, make symtab_and_line initialize its members itself. Many symtab_and_line declarations are moved to where the object is initialized at the same time both for clarity and to avoid double initialization. A few functions, like e.g., find_frame_sal are adjusted to return the sal using normal function return instead of an output parameter likewise to avoid having to default-construct a sal and then immediately have the object overwritten. gdb/ChangeLog: 2017-09-04 Pedro Alves <palves@redhat.com> * ada-lang.c (is_known_support_routine): Move sal declaration to where it is initialized. * breakpoint.c (create_internal_breakpoint, init_catchpoint) (parse_breakpoint_sals, decode_static_tracepoint_spec) (clear_command, update_static_tracepoint): Remove init_sal references. Move declarations closer to initializations. * cli/cli-cmds.c (list_command): Move sal declarations closer to initializations. * elfread.c (elf_gnu_ifunc_resolver_stop): Remove init_sal references. Move sal declarations closer to initializations. * frame.c (find_frame_sal): Return a symtab_and_line via function return instead of output parameter. Remove init_sal references. * frame.h (find_frame_sal): Return a symtab_and_line via function return instead of output parameter. * guile/scm-frame.c (gdbscm_frame_sal): Adjust. * guile/scm-symtab.c (stscm_make_sal_smob): Use in-place new instead of memset. (gdbscm_find_pc_line): Remove init_sal reference. * infcall.c (call_function_by_hand_dummy): Remove init_sal references. Move declarations closer to initializations. * infcmd.c (set_step_frame): Update. Move declarations closer to initializations. (finish_backward): Remove init_sal references. Move declarations closer to initializations. * infrun.c (process_event_stop_test, handle_step_into_function) (insert_hp_step_resume_breakpoint_at_frame) (insert_step_resume_breakpoint_at_caller): Likewise. * linespec.c (create_sals_line_offset, decode_digits_ordinary) (symbol_to_sal): Likewise. * probe.c (parse_probes_in_pspace): Remove init_sal reference. * python/py-frame.c (frapy_find_sal): Move sal declaration closer to its initialization. * reverse.c (save_bookmark_command): Use new/delete. Remove init_sal references. Move declarations closer to initializations. * source.c (get_current_source_symtab_and_line): Remove brace initialization. (set_current_source_symtab_and_line): Now takes the sal by const reference. Remove brace initialization. (line_info): Remove init_sal reference. * source.h (set_current_source_symtab_and_line): Now takes a symtab_and_line via const reference. * stack.c (set_current_sal_from_frame): Adjust. (print_frame_info): Adjust. (get_last_displayed_sal): Return the sal via function return instead of via output parameter. Simplify. (frame_info): Adjust. * stack.h (get_last_displayed_sal): Return the sal via function return instead of via output parameter. * symtab.c (init_sal): Delete. (find_pc_sect_line): Remove init_sal references. Move declarations closer to initializations. (find_function_start_sal): Remove init_sal references. Move declarations closer to initializations. * symtab.h (struct symtab_and_line): In-class initialize all fields. * tracepoint.c (set_traceframe_context) (print_one_static_tracepoint_marker): Remove init_sal references. Move declarations closer to initializations. * tui/tui-disasm.c (tui_show_disassem_and_update_source): Adjust. * tui/tui-stack.c (tui_show_frame_info): Adjust. Move declarations closer to initializations. * tui/tui-winsource.c (tui_update_source_window_as_is): Remove init_sal references. Adjust.
2017-09-04 18:10:13 +02:00
extern symtab_and_line find_frame_sal (frame_info *frame);
/* Set the current source and line to the location given by frame
PR gdb/13860: make -interpreter-exec console "list" behave more like "list". I noticed that "list" behaves differently in CLI vs MI. Particularly: $ ./gdb -nx -q ./testsuite/gdb.mi/mi-cli Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/mi-cli...done. (gdb) start Temporary breakpoint 1 at 0x40054d: file ../../../src/gdb/testsuite/gdb.mi/basics.c, line 62. Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/mi-cli Temporary breakpoint 1, main () at ../../../src/gdb/testsuite/gdb.mi/basics.c:62 62 callee1 (2, "A string argument.", 3.5); (gdb) list 57 { 58 } 59 60 main () 61 { 62 callee1 (2, "A string argument.", 3.5); 63 callee1 (2, "A string argument.", 3.5); 64 65 do_nothing (); /* Hello, World! */ 66 (gdb) Note the list started at line 57. IOW, the program stopped at line 62, and GDB centered the list on that. compare with: $ ./gdb -nx -q ./testsuite/gdb.mi/mi-cli -i=mi =thread-group-added,id="i1" ~"Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/mi-cli..." ~"done.\n" (gdb) start &"start\n" ... ~"\nTemporary breakpoint " ~"1, main () at ../../../src/gdb/testsuite/gdb.mi/basics.c:62\n" ~"62\t callee1 (2, \"A string argument.\", 3.5);\n" *stopped,reason="breakpoint-hit",disp="del",bkptno="1",frame={addr="0x000000000040054d",func="main",args=[],file="../../../src/gdb/testsuite/gdb.mi/basics.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.mi/basics.c",line="62"},thread-id="1",stopped-threads="all",core="0" =breakpoint-deleted,id="1" (gdb) -interpreter-exec console list ~"62\t callee1 (2, \"A string argument.\", 3.5);\n" ~"63\t callee1 (2, \"A string argument.\", 3.5);\n" ~"64\t\n" ~"65\t do_nothing (); /* Hello, World! */\n" ~"66\t\n" ~"67\t callme (1);\n" ~"68\t callme (2);\n" ~"69\t\n" ~"70\t return 0;\n" ~"71\t}\n" ^done (gdb) Here the list starts at line 62, where the program was stopped. This happens because print_stack_frame, called from both normal_stop and mi_on_normal_stop, is the function responsible for setting the current sal from the selected frame, overrides the PRINT_WHAT argument, and only after that does it decide whether to center the current sal line or not, based on the overridden value, and it will always decide false. (The print_stack_frame call in mi_on_normal_stop is a little different from the call in normal_stop, in that it is an unconditional SRC_AND_LOC call. A future patch will make those uniform.) A previous version of this patch made MI uniform with CLI here, by making print_stack_frame also center when MI is active. That changed the output of a "list" command in mi-cli.exp, to expect line 57 instead of 62, as per the example above. However, looking deeper, that list in question is the first "list" after the program stops, and right after the stop, before the "list", the test did "set listsize 1". Let's try the same thing with the CLI: (gdb) start 62 callee1 (2, "A string argument.", 3.5); (gdb) set listsize 1 (gdb) list 57 { Huh, that's unexpected. Why the 57? It's because print_stack_frame, called in reaction to the breakpoint stop, expecting the next "list" to show 10 lines (the listsize at the time) around line 62, sets the lines listed range to 57-67 (62 +/- 5). If the user changes the listsize before "list", why would we still show that range? Looks bogus to me. So the fix for this whole issue should be delay trying to center the listing to until actually listing, so that the correct listsize can be taken into account. This makes MI and CLI uniform too, as it deletes the center code from print_stack_frame. A series of tests are added to list.exp to cover this. mi-cli.exp was after all correct all along, but it now gains an additional test that lists lines with listsize 10, to ensure the centering is consistent with CLI's. One related Python test changed related output -- it's a test that prints the line number after stopping for a breakpoint, similar to the new list.exp tests. Previously we'd print the stop line minus 5 (due to the premature centering), now we print the stop line. I think that's a good change. Tested on x86_64 Fedora 20. gdb/ 2014-05-21 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (list_command): Handle the first "list" after the current source line having changed. * frame.h (set_current_sal_from_frame): Remove 'center' parameter. * infrun.c (normal_stop): Adjust call to set_current_sal_from_frame. * source.c (clear_lines_listed_range): New function. (set_current_source_symtab_and_line, identify_source_line): Clear the lines listed range. (line_info): Handle the first "info line" after the current source line having changed. * stack.c (print_stack_frame): Remove center handling. (set_current_sal_from_frame): Remove 'center' parameter. Don't center sal.line. gdb/testsuite/ 2014-05-21 Pedro Alves <palves@redhat.com> * gdb.base/list.exp (build_pattern, test_list): New procedures. Use them to test variations of "list" after reaching a breakpoint. * gdb.mi/mi-cli.exp (line_main_callme_2): New global. Test "list" with listsize 10 after reaching a breakpoint. * gdb.python/python.exp (decode_line current location line number): Adjust expected line number.
2014-05-22 00:15:27 +02:00
FRAME, if possible. */
PR gdb/13860: make -interpreter-exec console "list" behave more like "list". I noticed that "list" behaves differently in CLI vs MI. Particularly: $ ./gdb -nx -q ./testsuite/gdb.mi/mi-cli Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/mi-cli...done. (gdb) start Temporary breakpoint 1 at 0x40054d: file ../../../src/gdb/testsuite/gdb.mi/basics.c, line 62. Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/mi-cli Temporary breakpoint 1, main () at ../../../src/gdb/testsuite/gdb.mi/basics.c:62 62 callee1 (2, "A string argument.", 3.5); (gdb) list 57 { 58 } 59 60 main () 61 { 62 callee1 (2, "A string argument.", 3.5); 63 callee1 (2, "A string argument.", 3.5); 64 65 do_nothing (); /* Hello, World! */ 66 (gdb) Note the list started at line 57. IOW, the program stopped at line 62, and GDB centered the list on that. compare with: $ ./gdb -nx -q ./testsuite/gdb.mi/mi-cli -i=mi =thread-group-added,id="i1" ~"Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.mi/mi-cli..." ~"done.\n" (gdb) start &"start\n" ... ~"\nTemporary breakpoint " ~"1, main () at ../../../src/gdb/testsuite/gdb.mi/basics.c:62\n" ~"62\t callee1 (2, \"A string argument.\", 3.5);\n" *stopped,reason="breakpoint-hit",disp="del",bkptno="1",frame={addr="0x000000000040054d",func="main",args=[],file="../../../src/gdb/testsuite/gdb.mi/basics.c",fullname="/home/pedro/gdb/mygit/src/gdb/testsuite/gdb.mi/basics.c",line="62"},thread-id="1",stopped-threads="all",core="0" =breakpoint-deleted,id="1" (gdb) -interpreter-exec console list ~"62\t callee1 (2, \"A string argument.\", 3.5);\n" ~"63\t callee1 (2, \"A string argument.\", 3.5);\n" ~"64\t\n" ~"65\t do_nothing (); /* Hello, World! */\n" ~"66\t\n" ~"67\t callme (1);\n" ~"68\t callme (2);\n" ~"69\t\n" ~"70\t return 0;\n" ~"71\t}\n" ^done (gdb) Here the list starts at line 62, where the program was stopped. This happens because print_stack_frame, called from both normal_stop and mi_on_normal_stop, is the function responsible for setting the current sal from the selected frame, overrides the PRINT_WHAT argument, and only after that does it decide whether to center the current sal line or not, based on the overridden value, and it will always decide false. (The print_stack_frame call in mi_on_normal_stop is a little different from the call in normal_stop, in that it is an unconditional SRC_AND_LOC call. A future patch will make those uniform.) A previous version of this patch made MI uniform with CLI here, by making print_stack_frame also center when MI is active. That changed the output of a "list" command in mi-cli.exp, to expect line 57 instead of 62, as per the example above. However, looking deeper, that list in question is the first "list" after the program stops, and right after the stop, before the "list", the test did "set listsize 1". Let's try the same thing with the CLI: (gdb) start 62 callee1 (2, "A string argument.", 3.5); (gdb) set listsize 1 (gdb) list 57 { Huh, that's unexpected. Why the 57? It's because print_stack_frame, called in reaction to the breakpoint stop, expecting the next "list" to show 10 lines (the listsize at the time) around line 62, sets the lines listed range to 57-67 (62 +/- 5). If the user changes the listsize before "list", why would we still show that range? Looks bogus to me. So the fix for this whole issue should be delay trying to center the listing to until actually listing, so that the correct listsize can be taken into account. This makes MI and CLI uniform too, as it deletes the center code from print_stack_frame. A series of tests are added to list.exp to cover this. mi-cli.exp was after all correct all along, but it now gains an additional test that lists lines with listsize 10, to ensure the centering is consistent with CLI's. One related Python test changed related output -- it's a test that prints the line number after stopping for a breakpoint, similar to the new list.exp tests. Previously we'd print the stop line minus 5 (due to the premature centering), now we print the stop line. I think that's a good change. Tested on x86_64 Fedora 20. gdb/ 2014-05-21 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (list_command): Handle the first "list" after the current source line having changed. * frame.h (set_current_sal_from_frame): Remove 'center' parameter. * infrun.c (normal_stop): Adjust call to set_current_sal_from_frame. * source.c (clear_lines_listed_range): New function. (set_current_source_symtab_and_line, identify_source_line): Clear the lines listed range. (line_info): Handle the first "info line" after the current source line having changed. * stack.c (print_stack_frame): Remove center handling. (set_current_sal_from_frame): Remove 'center' parameter. Don't center sal.line. gdb/testsuite/ 2014-05-21 Pedro Alves <palves@redhat.com> * gdb.base/list.exp (build_pattern, test_list): New procedures. Use them to test variations of "list" after reaching a breakpoint. * gdb.mi/mi-cli.exp (line_main_callme_2): New global. Test "list" with listsize 10 after reaching a breakpoint. * gdb.python/python.exp (decode_line current location line number): Adjust expected line number.
2014-05-22 00:15:27 +02:00
void set_current_sal_from_frame (struct frame_info *);
/* Return the frame base (what ever that is) (DEPRECATED).
Old code was trying to use this single method for two conflicting
purposes. Such code needs to be updated to use either of:
get_frame_id: A low level frame unique identifier, that consists of
both a stack and a function address, that can be used to uniquely
identify a frame. This value is determined by the frame's
low-level unwinder, the stack part [typically] being the
top-of-stack of the previous frame, and the function part being the
function's start address. Since the correct identification of a
frameless function requires both a stack and function address,
the old get_frame_base method was not sufficient.
get_frame_base_address: get_frame_locals_address:
get_frame_args_address: A set of high-level debug-info dependant
addresses that fall within the frame. These addresses almost
certainly will not match the stack address part of a frame ID (as
returned by get_frame_base).
This replaced: frame->frame; */
extern CORE_ADDR get_frame_base (struct frame_info *);
/* Return the per-frame unique identifer. Can be used to relocate a
frame after a frame cache flush (and other similar operations). If
FI is NULL, return the null_frame_id.
NOTE: kettenis/20040508: These functions return a structure. On
platforms where structures are returned in static storage (vax,
m68k), this may trigger compiler bugs in code like:
if (frame_id_eq (get_frame_id (l), get_frame_id (r)))
where the return value from the first get_frame_id (l) gets
overwritten by the second get_frame_id (r). Please avoid writing
code like this. Use code like:
struct frame_id id = get_frame_id (l);
if (frame_id_eq (id, get_frame_id (r)))
instead, since that avoids the bug. */
extern struct frame_id get_frame_id (struct frame_info *fi);
gdb/ * NEWS: Document inlined function support. * Makefile.in (SFILES): Add inline-frame.c. (COMMON_OBS): Add inline-frame.o. * block.c (contained_in): Rewrite to use lexical nesting. (block_linkage_function): Skip inlined function blocks. (block_inlined_p): New. * block.h (struct block): Update comment. (block_inlined_p): New prototype. * blockframe.c (get_frame_block): Handle inlined functions. (get_frame_function): Do not use block_linkage_function. (block_innermost_frame): Use get_frame_block and contained_in. * breakpoint.c (watchpoint_check): Remove extra reinit_frame_cache. Skip over inlined functions. Simplify epilogue check. (bpstat_check_breakpoint_conditions): Use get_stack_frame_id. Update comments. (set_momentary_breakpoint): Only accept non-inlined frames. (watch_command_1): Use frame_unwind_caller_pc and frame_unwind_caller_id instead of get_prev_frame. (until_break_command): Likewise. Use get_stack_frame_id. * buildsym.c (end_symtab): Set SYMBOL_SYMTAB for block functions. * dwarf2loc.c (dwarf_expr_frame_base): Use block_linkage_function. * dwarf2read.c (process_die): Handle DW_TAG_inlined_subroutine. (read_func_scope, new_symbol): Likewise. Handle arguments specially for inlined functions without call site information. (inherit_abstract_dies): Allow tag mismatch for inlined subroutines. (die_specification): Treat DW_AT_abstract_origin as a specification. (read_type_die): Handle DW_TAG_inlined_subroutine. * frame-unwind.c (frame_unwind_init): Add inline_frame_unwind. * frame.c (fprint_frame_id): Print inline depth. (fprint_frame_type): Handle INLINE_FRAME and SENTINEL_FRAME. (skip_inlined_frames, get_stack_frame_id): New. (frame_unwind_caller_id): Use skip_inlined_frames. (frame_id_inlined_p): New. (frame_id_eq): Make the logic match the comments. Add inline_depth check. (frame_id_inner): Handle inlined functions. (frame_unwind_pc): New function, copied from frame_unwind_caller_pc. (frame_unwind_caller_pc): Use skip_inlined_frames and frame_unwind_pc. (get_prev_frame_1): Check for inline frames. Split out frame allocation to get_prev_frame_raw. (get_prev_frame_raw): New function. (get_prev_frame): Handle inline frames. (get_frame_pc): Use frame_unwind_pc. (get_frame_address_in_block): Skip inlined frames on both sides. (pc_notcurrent): Delete. (find_frame_sal): Rewrite to handle inline call sites. Use get_frame_address_in_block. (deprecated_update_frame_pc_hack): Make static. * frame.h: Update comments. (struct frame_id): Add inline_depth. (enum frame_type): Add INLINE_FRAME. (frame_id_inlined_p, get_stack_frame_id): New prototypes. * gdbthread.h (struct thread_info): Add step_stack_frame_id field. * infcmd.c (set_step_frame): New function. (step_once): Use set_step_frame. Handle inlined functions. (until_next_command): Use set_step_frame. (finish_backward), finish_forward): Use get_stack_frame_id. (finish_command): Support inlined functions. * inferior.h (set_step_info): New prototype. * infrun.c (RESUME_ALL): Use minus_one_ptid. (clear_proceed_status): Clear step_stack_frame_id. (init_wait_for_inferior): Call clear_inline_frame_state. (init_execution_control_state): Make static. (set_step_info): New function. (init_thread_stepping_state): Do not set the symtab or line here. (stepped_in_from): New function. (handle_inferior_event): Handle inlined functions. Use set_step_info. (insert_step_resume_breakpoint_at_frame): Use get_stack_frame_id. (struct inferior_status): Add step_stack_frame_id. (save_inferior_status, restore_inferior_status): Save and restore step_stack_frame_id. * inline-frame.c, inline-frame.h: New files. * minsyms.c (prim_record_minimal_symbol_and_info): Use XCALLOC. * regcache.c (regcache_write_pc): Call reinit_frame_cache. * s390-tdep.c (s390_prologue_frame_unwind_cache): Handle INLINE_FRAME. * stack.c (frame_show_address): New. (print_frame_info, print_frame): Use it. (find_frame_funname): Use get_frame_function. Handle inlined blocks. (frame_info): Mark inlined functions. (backtrace_command_1): Use get_current_user_frame. (print_frame_local_vars, print_frame_label_vars): Update comments. (return_command): Refuse inlined functions. * symtab.c (lookup_symbol_aux_local): Stop at inlined function boundaries. (find_function_start_sal): Avoid inlined functions. (completion_list_add_fields): New function. (default_make_symbol_completion_list): Use it. Use block_static_block and block_global_block. Check for inlined functions. (skip_prologue_using_sal): Avoid line number comparison across inlining. * symtab.h (struct symbol): Add is_inlined. (SYMBOL_INLINED): New. * target.c (target_resume): Call clear_inline_frame_state. * valops.c (value_of_variable): Check block_inlined_p. gdb/doc/ * gdb.texinfo (Debugging Optimized Code): New chapter. (Compiling for Debugging): Reference it. Move some text to the new section. gdb/testsuite/ * gdb.base/break.exp: Add an XFAIL for gcc/36748. * gdb.cp/annota2.exp: Accept frames-invalid in more places. * gdb.opt/Makefile.in (EXECUTABLES): Update. * gdb.opt/clobbered-registers-O2.exp: Update to GPL v3. * gdb.opt/inline-bt.c, gdb.opt/inline-bt.exp, gdb.opt/inline-cmds.c, gdb.opt/inline-cmds.exp, gdb.opt/inline-locals.c, gdb.opt/inline-locals.exp, gdb.opt/inline-markers.c: New files. * lib/gdb.exp (skip_inline_frame_tests): New function. (skip_inline_var_tests): New function.
2009-06-28 02:20:24 +02:00
extern struct frame_id get_stack_frame_id (struct frame_info *fi);
extern struct frame_id frame_unwind_caller_id (struct frame_info *next_frame);
/* Assuming that a frame is `normal', return its base-address, or 0 if
the information isn't available. NOTE: This address is really only
meaningful to the frame's high-level debug info. */
extern CORE_ADDR get_frame_base_address (struct frame_info *);
/* Assuming that a frame is `normal', return the base-address of the
local variables, or 0 if the information isn't available. NOTE:
This address is really only meaningful to the frame's high-level
debug info. Typically, the argument and locals share a single
base-address. */
extern CORE_ADDR get_frame_locals_address (struct frame_info *);
/* Assuming that a frame is `normal', return the base-address of the
parameter list, or 0 if that information isn't available. NOTE:
This address is really only meaningful to the frame's high-level
debug info. Typically, the argument and locals share a single
base-address. */
extern CORE_ADDR get_frame_args_address (struct frame_info *);
/* The frame's level: 0 for innermost, 1 for its caller, ...; or -1
for an invalid frame). */
extern int frame_relative_level (struct frame_info *fi);
/* Return the frame's type. */
extern enum frame_type get_frame_type (struct frame_info *);
2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode".
2009-10-19 11:51:43 +02:00
/* Return the frame's program space. */
extern struct program_space *get_frame_program_space (struct frame_info *);
/* Unwind THIS frame's program space from the NEXT frame. */
extern struct program_space *frame_unwind_program_space (struct frame_info *);
class address_space;
2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode".
2009-10-19 11:51:43 +02:00
/* Return the frame's address space. */
extern const address_space *get_frame_address_space (struct frame_info *);
/* For frames where we can not unwind further, describe why. */
enum unwind_stop_reason
{
#define SET(name, description) name,
#define FIRST_ENTRY(name) UNWIND_FIRST = name,
#define LAST_ENTRY(name) UNWIND_LAST = name,
#define FIRST_ERROR(name) UNWIND_FIRST_ERROR = name,
#include "unwind_stop_reasons.def"
#undef SET
#undef FIRST_ENTRY
#undef LAST_ENTRY
#undef FIRST_ERROR
};
/* Return the reason why we can't unwind past this frame. */
enum unwind_stop_reason get_frame_unwind_stop_reason (struct frame_info *);
Add a TRY_CATCH to get_prev_frame_always to better manage errors during unwind. https://sourceware.org/ml/gdb-patches/2014-05/msg00737.html Currently a MEMORY_ERROR raised during unwinding a frame will cause the unwind to stop with an error message, for example: (gdb) bt #0 breakpt () at amd64-invalid-stack-middle.c:27 #1 0x00000000004008f0 in func5 () at amd64-invalid-stack-middle.c:32 #2 0x0000000000400900 in func4 () at amd64-invalid-stack-middle.c:38 #3 0x0000000000400910 in func3 () at amd64-invalid-stack-middle.c:44 #4 0x0000000000400928 in func2 () at amd64-invalid-stack-middle.c:50 Cannot access memory at address 0x2aaaaaab0000 However, frame #4 is marked as being the end of the stack unwind, so a subsequent request for the backtrace looses the error message, such as: (gdb) bt #0 breakpt () at amd64-invalid-stack-middle.c:27 #1 0x00000000004008f0 in func5 () at amd64-invalid-stack-middle.c:32 #2 0x0000000000400900 in func4 () at amd64-invalid-stack-middle.c:38 #3 0x0000000000400910 in func3 () at amd64-invalid-stack-middle.c:44 #4 0x0000000000400928 in func2 () at amd64-invalid-stack-middle.c:50 When fetching the backtrace, or requesting the stack depth using the MI interface the situation is even worse, the first time a request is made we encounter the memory error and so the MI returns an error instead of the correct result, for example: (gdb) -stack-info-depth ^error,msg="Cannot access memory at address 0x2aaaaaab0000" Or, (gdb) -stack-list-frames ^error,msg="Cannot access memory at address 0x2aaaaaab0000" However, once one of these commands has been used gdb has, internally, walked the stack and figured that out that frame #4 is the bottom of the stack, so the second time an MI command is tried you'll get the "expected" result: (gdb) -stack-info-depth ^done,depth="5" Or, (gdb) -stack-list-frames ^done,stack=[frame={level="0", .. snip lots .. }] After this patch the MEMORY_ERROR encountered during the frame unwind is attached to frame #4 as the stop reason, and is displayed in the CLI each time the backtrace is requested. In the MI, catching the error means that the "expected" result is returned the first time the MI command is issued. So, from the CLI the results of the backtrace will be: (gdb) bt #0 breakpt () at amd64-invalid-stack-middle.c:27 #1 0x00000000004008f0 in func5 () at amd64-invalid-stack-middle.c:32 #2 0x0000000000400900 in func4 () at amd64-invalid-stack-middle.c:38 #3 0x0000000000400910 in func3 () at amd64-invalid-stack-middle.c:44 #4 0x0000000000400928 in func2 () at amd64-invalid-stack-middle.c:50 Backtrace stopped: Cannot access memory at address 0x2aaaaaab0000 Each and every time that the backtrace is requested, while the MI output will similarly be consistently: (gdb) -stack-info-depth ^done,depth="5" Or, (gdb) -stack-list-frames ^done,stack=[frame={level="0", .. snip lots .. }] gdb/ChangeLog: * frame.c (struct frame_info): Add stop_string field. (get_prev_frame_always_1): Renamed from get_prev_frame_always. (get_prev_frame_always): Old content moved into get_prev_frame_always_1. Call get_prev_frame_always_1 inside TRY_CATCH, handle MEMORY_ERROR exceptions. (frame_stop_reason_string): New function definition. * frame.h (unwind_stop_reason_to_string): Extend comment to mention frame_stop_reason_string. (frame_stop_reason_string): New function declaration. * stack.c (frame_info): Switch to frame_stop_reason_string. (backtrace_command_1): Switch to frame_stop_reason_string. * unwind_stop_reason.def: Add UNWIND_MEMORY_ERROR. (LAST_ENTRY): Changed to UNWIND_MEMORY_ERROR. * guile/lib/gdb.scm: Add FRAME_UNWIND_MEMORY_ERROR to export list. gdb/doc/ChangeLog: * guile.texi (Frames In Guile): Mention FRAME_UNWIND_MEMORY_ERROR. * python.texi (Frames In Python): Mention gdb.FRAME_UNWIND_MEMORY_ERROR. gdb/testsuite/ChangeLog: * gdb.arch/amd64-invalid-stack-middle.exp: Update expected results. * gdb.arch/amd64-invalid-stack-top.exp: Likewise.
2014-05-29 00:34:43 +02:00
/* Translate a reason code to an informative string. This converts the
generic stop reason codes into a generic string describing the code.
For a possibly frame specific string explaining the stop reason, use
FRAME_STOP_REASON_STRING instead. */
const char *unwind_stop_reason_to_string (enum unwind_stop_reason);
Add a TRY_CATCH to get_prev_frame_always to better manage errors during unwind. https://sourceware.org/ml/gdb-patches/2014-05/msg00737.html Currently a MEMORY_ERROR raised during unwinding a frame will cause the unwind to stop with an error message, for example: (gdb) bt #0 breakpt () at amd64-invalid-stack-middle.c:27 #1 0x00000000004008f0 in func5 () at amd64-invalid-stack-middle.c:32 #2 0x0000000000400900 in func4 () at amd64-invalid-stack-middle.c:38 #3 0x0000000000400910 in func3 () at amd64-invalid-stack-middle.c:44 #4 0x0000000000400928 in func2 () at amd64-invalid-stack-middle.c:50 Cannot access memory at address 0x2aaaaaab0000 However, frame #4 is marked as being the end of the stack unwind, so a subsequent request for the backtrace looses the error message, such as: (gdb) bt #0 breakpt () at amd64-invalid-stack-middle.c:27 #1 0x00000000004008f0 in func5 () at amd64-invalid-stack-middle.c:32 #2 0x0000000000400900 in func4 () at amd64-invalid-stack-middle.c:38 #3 0x0000000000400910 in func3 () at amd64-invalid-stack-middle.c:44 #4 0x0000000000400928 in func2 () at amd64-invalid-stack-middle.c:50 When fetching the backtrace, or requesting the stack depth using the MI interface the situation is even worse, the first time a request is made we encounter the memory error and so the MI returns an error instead of the correct result, for example: (gdb) -stack-info-depth ^error,msg="Cannot access memory at address 0x2aaaaaab0000" Or, (gdb) -stack-list-frames ^error,msg="Cannot access memory at address 0x2aaaaaab0000" However, once one of these commands has been used gdb has, internally, walked the stack and figured that out that frame #4 is the bottom of the stack, so the second time an MI command is tried you'll get the "expected" result: (gdb) -stack-info-depth ^done,depth="5" Or, (gdb) -stack-list-frames ^done,stack=[frame={level="0", .. snip lots .. }] After this patch the MEMORY_ERROR encountered during the frame unwind is attached to frame #4 as the stop reason, and is displayed in the CLI each time the backtrace is requested. In the MI, catching the error means that the "expected" result is returned the first time the MI command is issued. So, from the CLI the results of the backtrace will be: (gdb) bt #0 breakpt () at amd64-invalid-stack-middle.c:27 #1 0x00000000004008f0 in func5 () at amd64-invalid-stack-middle.c:32 #2 0x0000000000400900 in func4 () at amd64-invalid-stack-middle.c:38 #3 0x0000000000400910 in func3 () at amd64-invalid-stack-middle.c:44 #4 0x0000000000400928 in func2 () at amd64-invalid-stack-middle.c:50 Backtrace stopped: Cannot access memory at address 0x2aaaaaab0000 Each and every time that the backtrace is requested, while the MI output will similarly be consistently: (gdb) -stack-info-depth ^done,depth="5" Or, (gdb) -stack-list-frames ^done,stack=[frame={level="0", .. snip lots .. }] gdb/ChangeLog: * frame.c (struct frame_info): Add stop_string field. (get_prev_frame_always_1): Renamed from get_prev_frame_always. (get_prev_frame_always): Old content moved into get_prev_frame_always_1. Call get_prev_frame_always_1 inside TRY_CATCH, handle MEMORY_ERROR exceptions. (frame_stop_reason_string): New function definition. * frame.h (unwind_stop_reason_to_string): Extend comment to mention frame_stop_reason_string. (frame_stop_reason_string): New function declaration. * stack.c (frame_info): Switch to frame_stop_reason_string. (backtrace_command_1): Switch to frame_stop_reason_string. * unwind_stop_reason.def: Add UNWIND_MEMORY_ERROR. (LAST_ENTRY): Changed to UNWIND_MEMORY_ERROR. * guile/lib/gdb.scm: Add FRAME_UNWIND_MEMORY_ERROR to export list. gdb/doc/ChangeLog: * guile.texi (Frames In Guile): Mention FRAME_UNWIND_MEMORY_ERROR. * python.texi (Frames In Python): Mention gdb.FRAME_UNWIND_MEMORY_ERROR. gdb/testsuite/ChangeLog: * gdb.arch/amd64-invalid-stack-middle.exp: Update expected results. * gdb.arch/amd64-invalid-stack-top.exp: Likewise.
2014-05-29 00:34:43 +02:00
/* Return a possibly frame specific string explaining why the unwind
stopped here. E.g., if unwinding tripped on a memory error, this
will return the error description string, which includes the address
that we failed to access. If there's no specific reason stored for
a frame then a generic reason string will be returned.
Should only be called for frames that don't have a previous frame. */
const char *frame_stop_reason_string (struct frame_info *);
/* Unwind the stack frame so that the value of REGNUM, in the previous
(up, older) frame is returned. If VALUEP is NULL, don't
fetch/compute the value. Instead just return the location of the
value. */
extern void frame_register_unwind (frame_info *frame, int regnum,
int *optimizedp, int *unavailablep,
enum lval_type *lvalp,
CORE_ADDR *addrp, int *realnump,
gdb_byte *valuep);
/* Fetch a register from this, or unwind a register from the next
frame. Note that the get_frame methods are wrappers to
frame->next->unwind. They all [potentially] throw an error if the
Convert frame unwinders to use the current frame and "struct value". * frame.c (frame_debug): Make global. (get_frame_id): Pass this frame to unwinder routines. (frame_pc_unwind): Remove unused unwind->prev_pc support. (do_frame_register_read): Do not discard the return value of frame_register_read. (frame_register_unwind): Remove debug messages. Use frame_unwind_register_value. (frame_unwind_register_value, get_frame_register_value): New functions. (create_new_frame, get_frame_base_address, get_frame_locals_address) (get_frame_args_address, get_frame_type): Pass this frame to unwinder routines. (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New functions. * frame.h: Update comments. (frame_debug, frame_unwind_register_value, get_frame_register_value) (frame_prepare_for_sniffer): Declare. * frame-unwind.h: Update comments and parameter names. (default_frame_sniffer): Declare. (frame_prev_register_ftype): Return a struct value *. (struct frame_unwind): Remove prev_pc member. (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): Declare. * frame-base.h: Update comments and parameter names. * valops.c (value_fetch_lazy): Use get_frame_register_value. Iterate if necessary. Add debugging output. * sentinel-frame.c (sentinel_frame_prev_register) (sentinel_frame_this_id): Update for new signature. (sentinel_frame_prev_pc): Delete. (sentinel_frame_unwinder): Remove prev_pc. * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize prev_pc. * libunwind-frame.c (libunwind_frame_unwind): Likewise. * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer. (frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder): New function. (frame_unwind_find_by_frame): Take this frame. Only use sniffers from unwinders. Use frame_prepare_for_sniffer. (default_frame_sniffer, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): New functions. * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id. (dummy_frame_prev_register, dummy_frame_this_id): Update for new signature. * gdbarch.sh: Replace unwind_dummy_id with dummy_id. * gdbarch.c, gdbarch.c: Regenerated. * frame-base.c (default_frame_base_address) (default_frame_locals_address, default_frame_args_address): Update for new signature. (frame_base_find_by_frame): Pass this frame to unwinder routines. * infcall.c (call_function_by_hand): Update comments. * Makefile.in (frame-unwind.o): Update dependencies. * gdbint.texinfo (Stack Frames): New chapter. (Algorithms): Move Frames text to the new chapter. (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS. Document gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
2008-04-30 23:16:46 +02:00
fetch fails. The value methods never return NULL, but usually
do return a lazy value. */
extern void frame_unwind_register (frame_info *next_frame,
int regnum, gdb_byte *buf);
extern void get_frame_register (struct frame_info *frame,
int regnum, gdb_byte *buf);
struct value *frame_unwind_register_value (frame_info *next_frame,
Convert frame unwinders to use the current frame and "struct value". * frame.c (frame_debug): Make global. (get_frame_id): Pass this frame to unwinder routines. (frame_pc_unwind): Remove unused unwind->prev_pc support. (do_frame_register_read): Do not discard the return value of frame_register_read. (frame_register_unwind): Remove debug messages. Use frame_unwind_register_value. (frame_unwind_register_value, get_frame_register_value): New functions. (create_new_frame, get_frame_base_address, get_frame_locals_address) (get_frame_args_address, get_frame_type): Pass this frame to unwinder routines. (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New functions. * frame.h: Update comments. (frame_debug, frame_unwind_register_value, get_frame_register_value) (frame_prepare_for_sniffer): Declare. * frame-unwind.h: Update comments and parameter names. (default_frame_sniffer): Declare. (frame_prev_register_ftype): Return a struct value *. (struct frame_unwind): Remove prev_pc member. (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): Declare. * frame-base.h: Update comments and parameter names. * valops.c (value_fetch_lazy): Use get_frame_register_value. Iterate if necessary. Add debugging output. * sentinel-frame.c (sentinel_frame_prev_register) (sentinel_frame_this_id): Update for new signature. (sentinel_frame_prev_pc): Delete. (sentinel_frame_unwinder): Remove prev_pc. * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize prev_pc. * libunwind-frame.c (libunwind_frame_unwind): Likewise. * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer. (frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder): New function. (frame_unwind_find_by_frame): Take this frame. Only use sniffers from unwinders. Use frame_prepare_for_sniffer. (default_frame_sniffer, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): New functions. * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id. (dummy_frame_prev_register, dummy_frame_this_id): Update for new signature. * gdbarch.sh: Replace unwind_dummy_id with dummy_id. * gdbarch.c, gdbarch.c: Regenerated. * frame-base.c (default_frame_base_address) (default_frame_locals_address, default_frame_args_address): Update for new signature. (frame_base_find_by_frame): Pass this frame to unwinder routines. * infcall.c (call_function_by_hand): Update comments. * Makefile.in (frame-unwind.o): Update dependencies. * gdbint.texinfo (Stack Frames): New chapter. (Algorithms): Move Frames text to the new chapter. (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS. Document gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
2008-04-30 23:16:46 +02:00
int regnum);
struct value *get_frame_register_value (struct frame_info *frame,
int regnum);
extern LONGEST frame_unwind_register_signed (frame_info *next_frame,
int regnum);
extern LONGEST get_frame_register_signed (struct frame_info *frame,
int regnum);
extern ULONGEST frame_unwind_register_unsigned (frame_info *frame,
int regnum);
extern ULONGEST get_frame_register_unsigned (struct frame_info *frame,
int regnum);
/* Read a register from this, or unwind a register from the next
frame. Note that the read_frame methods are wrappers to
get_frame_register_value, that do not throw if the result is
optimized out or unavailable. */
extern int read_frame_register_unsigned (struct frame_info *frame,
int regnum, ULONGEST *val);
/* Get the value of the register that belongs to this FRAME. This
2004-09-08 06:56:20 +02:00
function is a wrapper to the call sequence ``frame_register_unwind
(get_next_frame (FRAME))''. As per frame_register_unwind(), if
VALUEP is NULL, the registers value is not fetched/computed. */
extern void frame_register (struct frame_info *frame, int regnum,
int *optimizedp, int *unavailablep,
enum lval_type *lvalp,
CORE_ADDR *addrp, int *realnump,
gdb_byte *valuep);
2003-06-14 Andrew Cagney <cagney@redhat.com> Mark Kettenis <kettenis@gnu.org> * gdbarch.sh (CONVERT_REGISTER_P): Add "type" parameter. (REGISTER_TO_VALUE, VALUE_TO_REGISTER): Replace raw buffer parameter with "frame". * gdbarch.h, gdbarch.c: Re-generate. * frame.h (put_frame_register): Declare. * frame.c (put_frame_register): New function. * arch-utils.c (legacy_convert_register_p): Add "type" parameter. (legacy_register_to_value): Rewrite, use "frame" to get the register value. (legacy_value_to_register): Rewrite, use "frame" to find the register's location before storing. * arch-utils.h (legacy_convert_register_p): Update. (legacy_register_to_value, legacy_value_to_register): Update. * findvar.c (value_from_register): Rewrite, eliminate use of REGISTER_CONVERT_TO_TYPE, pass "type" to CONVERT_REGISTER_P, pass "frame" to REGISTER_TO_VALUE. * valops.c (value_assign): Move the CONVERT_REGISTER code to the lval_reg_frame_relative + lval_register branch of the switch. Do not use REGISTER_CONVERT_FROM_TYPE. Use put_frame_register. * i386-tdep.c (I386_EBX_REGNUM, I386_ECX_REGNUM, I386_ESI_REGNUM, I386_EDI_REGNUM): New defines. (i386_next_regnum, i386_convert_register_p, i386_register_to_value, i386_value_to_register): New functions. (i386_register_convertible, i386_register_convert_to_virtual, i386_convert_to_raw): Remove functions. (i386_gdbarch_init): Set convert_register_p, register_to_value and value_to_register instead of register_convertible, register_convert_to_virtual and register_convert_to_raw. * mips-tdep.c (mips_convert_register_p): New function. (mips_value_to_register): Replace mips_register_convert_from_type. (mips_register_to_value): Replace mips_register_convert_to_type. (mips_gdbarch_init): Set conver_register_p, value_to_register and register_to_value. * alpha-tdep.c (alpha_convert_register_p): Update. (alpha_value_to_register): Update, store the register. (alpha_register_to_value): Update, fetch the register.
2003-06-15 00:35:25 +02:00
/* The reverse. Store a register value relative to the specified
frame. Note: this call makes the frame's state undefined. The
register and frame caches must be flushed. */
extern void put_frame_register (struct frame_info *frame, int regnum,
const gdb_byte *buf);
2003-06-14 Andrew Cagney <cagney@redhat.com> Mark Kettenis <kettenis@gnu.org> * gdbarch.sh (CONVERT_REGISTER_P): Add "type" parameter. (REGISTER_TO_VALUE, VALUE_TO_REGISTER): Replace raw buffer parameter with "frame". * gdbarch.h, gdbarch.c: Re-generate. * frame.h (put_frame_register): Declare. * frame.c (put_frame_register): New function. * arch-utils.c (legacy_convert_register_p): Add "type" parameter. (legacy_register_to_value): Rewrite, use "frame" to get the register value. (legacy_value_to_register): Rewrite, use "frame" to find the register's location before storing. * arch-utils.h (legacy_convert_register_p): Update. (legacy_register_to_value, legacy_value_to_register): Update. * findvar.c (value_from_register): Rewrite, eliminate use of REGISTER_CONVERT_TO_TYPE, pass "type" to CONVERT_REGISTER_P, pass "frame" to REGISTER_TO_VALUE. * valops.c (value_assign): Move the CONVERT_REGISTER code to the lval_reg_frame_relative + lval_register branch of the switch. Do not use REGISTER_CONVERT_FROM_TYPE. Use put_frame_register. * i386-tdep.c (I386_EBX_REGNUM, I386_ECX_REGNUM, I386_ESI_REGNUM, I386_EDI_REGNUM): New defines. (i386_next_regnum, i386_convert_register_p, i386_register_to_value, i386_value_to_register): New functions. (i386_register_convertible, i386_register_convert_to_virtual, i386_convert_to_raw): Remove functions. (i386_gdbarch_init): Set convert_register_p, register_to_value and value_to_register instead of register_convertible, register_convert_to_virtual and register_convert_to_raw. * mips-tdep.c (mips_convert_register_p): New function. (mips_value_to_register): Replace mips_register_convert_from_type. (mips_register_to_value): Replace mips_register_convert_to_type. (mips_gdbarch_init): Set conver_register_p, value_to_register and register_to_value. * alpha-tdep.c (alpha_convert_register_p): Update. (alpha_value_to_register): Update, store the register. (alpha_register_to_value): Update, fetch the register.
2003-06-15 00:35:25 +02:00
/* Read LEN bytes from one or multiple registers starting with REGNUM
gdb/ * dwarf2loc.c (read_pieced_value): Handle get_frame_register_bytes returning that the register piece is unavailable/optimized out. (write_pieced_value): Handle get_frame_register_bytes returning that the register piece is unavailable/optimized out when doing a read-modify write of a bitfield. * findvar.c (value_from_register): Handle get_frame_register_bytes returning that the register piece is unavailable/optimized out. * frame.c (get_frame_register_bytes): New parameters `optimizedp' and `unavailablep'. Throw error on bad debug info. Use frame_register instead of frame_register_read, to fill in the new arguments. * frame.h (get_frame_register_bytes): New parameters `optimizedp' and `unavailablep'. * valops.c: (value_assign): Adjust, and handle get_frame_register_bytes failing. * spu-tdep.c: Include exceptions.h. (spu_software_single_step): Adjust, and handle get_frame_register_bytes failing. (spu_get_longjmp_target): Ditto. * gdbarch.sh (register_to_value): Change to return int. New parameters `optimizedp' and `unavailablep'. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.c (i386_register_to_value): Adjust to new gdbarch_register_to_value interface. * i387-tdep.c (i387_register_to_value): Ditto. * i387-tdep.h (i387_register_to_value): Ditto. * alpha-tdep.c (alpha_register_to_value): Ditto. * ia64-tdep.c (ia64_register_to_value): Ditto. * m68k-tdep.c (m68k_register_to_value): Ditto. * mips-tdep.c (mips_register_to_value): Ditto. * rs6000-tdep.c (rs6000_register_to_value): Ditto.
2011-03-18 19:42:41 +01:00
in frame FRAME, starting at OFFSET, into BUF. If the register
contents are optimized out or unavailable, set *OPTIMIZEDP,
*UNAVAILABLEP accordingly. */
extern int get_frame_register_bytes (struct frame_info *frame, int regnum,
CORE_ADDR offset, int len,
gdb/ * dwarf2loc.c (read_pieced_value): Handle get_frame_register_bytes returning that the register piece is unavailable/optimized out. (write_pieced_value): Handle get_frame_register_bytes returning that the register piece is unavailable/optimized out when doing a read-modify write of a bitfield. * findvar.c (value_from_register): Handle get_frame_register_bytes returning that the register piece is unavailable/optimized out. * frame.c (get_frame_register_bytes): New parameters `optimizedp' and `unavailablep'. Throw error on bad debug info. Use frame_register instead of frame_register_read, to fill in the new arguments. * frame.h (get_frame_register_bytes): New parameters `optimizedp' and `unavailablep'. * valops.c: (value_assign): Adjust, and handle get_frame_register_bytes failing. * spu-tdep.c: Include exceptions.h. (spu_software_single_step): Adjust, and handle get_frame_register_bytes failing. (spu_get_longjmp_target): Ditto. * gdbarch.sh (register_to_value): Change to return int. New parameters `optimizedp' and `unavailablep'. * gdbarch.h, gdbarch.c: Regenerate. * i386-tdep.c (i386_register_to_value): Adjust to new gdbarch_register_to_value interface. * i387-tdep.c (i387_register_to_value): Ditto. * i387-tdep.h (i387_register_to_value): Ditto. * alpha-tdep.c (alpha_register_to_value): Ditto. * ia64-tdep.c (ia64_register_to_value): Ditto. * m68k-tdep.c (m68k_register_to_value): Ditto. * mips-tdep.c (mips_register_to_value): Ditto. * rs6000-tdep.c (rs6000_register_to_value): Ditto.
2011-03-18 19:42:41 +01:00
gdb_byte *myaddr,
int *optimizedp, int *unavailablep);
/* Write LEN bytes to one or multiple registers starting with REGNUM
in frame FRAME, starting at OFFSET, into BUF. */
extern void put_frame_register_bytes (struct frame_info *frame, int regnum,
CORE_ADDR offset, int len,
const gdb_byte *myaddr);
/* Unwind the PC. Strictly speaking return the resume address of the
calling frame. For GDB, `pc' is the resume address and not a
specific register. */
extern CORE_ADDR frame_unwind_caller_pc (struct frame_info *frame);
/* Discard the specified frame. Restoring the registers to the state
of the caller. */
extern void frame_pop (struct frame_info *frame);
/* Return memory from the specified frame. A frame knows its thread /
LWP and hence can find its way down to a target. The assumption
here is that the current and previous frame share a common address
space.
If the memory read fails, these methods throw an error.
NOTE: cagney/2003-06-03: Should there be unwind versions of these
methods? That isn't clear. Can code, for instance, assume that
this and the previous frame's memory or architecture are identical?
If architecture / memory changes are always separated by special
adaptor frames this should be ok. */
extern void get_frame_memory (struct frame_info *this_frame, CORE_ADDR addr,
gdb_byte *buf, int len);
extern LONGEST get_frame_memory_signed (struct frame_info *this_frame,
CORE_ADDR memaddr, int len);
extern ULONGEST get_frame_memory_unsigned (struct frame_info *this_frame,
CORE_ADDR memaddr, int len);
/* Same as above, but return non-zero when the entire memory read
succeeds, zero otherwize. */
extern int safe_frame_unwind_memory (struct frame_info *this_frame,
CORE_ADDR addr, gdb_byte *buf, int len);
/* Return this frame's architecture. */
extern struct gdbarch *get_frame_arch (struct frame_info *this_frame);
/* Return the previous frame's architecture. */
extern struct gdbarch *frame_unwind_arch (frame_info *next_frame);
/* Return the previous frame's architecture, skipping inline functions. */
extern struct gdbarch *frame_unwind_caller_arch (struct frame_info *frame);
/* Values for the source flag to be used in print_frame_info_base(). */
2000-01-18 01:55:13 +01:00
enum print_what
{
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-07 20:36:19 +01:00
/* Print only the source line, like in stepi. */
2000-01-18 01:55:13 +01:00
SRC_LINE = -1,
/* Print only the location, i.e. level, address (sometimes)
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-07 20:36:19 +01:00
function, args, file, line, line num. */
2000-01-18 01:55:13 +01:00
LOCATION,
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-07 20:36:19 +01:00
/* Print both of the above. */
2000-01-18 01:55:13 +01:00
SRC_AND_LOC,
2011-01-07 Michael Snyder <msnyder@vmware.com> * ada-lang.c: Comment cleanup, mostly periods and spaces. * ada-lang.h: Ditto. * ada-tasks.c: Ditto. * ada-valprint.c: Ditto. * aix-threads.c: Ditto. * alpha-linux-nat.c: Ditto. * alpha-linux-tdep.c: Ditto. * alpha-mdebug-tdep.c: Ditto. * alpha-nat.c: Ditto. * alpha-osf1-tdep.c: Ditto. * alpha-tdep.c: Ditto. * alphabsd-nat.c: Ditto. * alphabsd-tdep.c: Ditto. * amd64-darwin-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * amd64-sol2-tdep.c: Ditto. * amd64-tdep.c: Ditto. * amd64-fbsd-tdep.c: Ditto. * amd64-nbsd-tdep.c: Ditto. * amd64-obsd-tdep.c: Ditto. * amd64-linux-nat.c: Ditto. * amd64-linux-tdep.c: Ditto. * arm-tdep.c: Ditto. * arm-tdep.h: Ditto. * armnbsd-nat.c: Ditto. * avr-tdep.c: Ditto. * bfin-tdep.c: Ditto. * bsd-kvm.c: Ditto. * c-typeprintc: Ditto. * c-valprint.c: Ditto. * coff-pe-read.h: Ditto. * coffreead.c: Ditto. * cris-tdep.c: Ditto. * d-lang.c: Ditto. * darwin-nat-info.c: Ditto. * darwin-nat.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * dcache.c: Ditto. * dcache.h: Ditto. * dec-thread.c: Ditto. * defs.h: Ditto. * demangle.c: Ditto. * dicos-tdep.c: Ditto. * dictionary.c: Ditto. * dictionary.h: Ditto. * dink32-rom.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dsrec.c: Ditto. * dummy-frame.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * environ.c: Ditto. * eval.c: Ditto. * event-top.h: Ditto. * exceptions.c: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-exp.y: Ditto. * f-lang.c: Ditto. * f-lang.h: Ditto. * f-typeprint.c: Ditto. * f-valprint.c: Ditto. * fbsd-nat.c: Ditto. * findvar.c: Ditto. * fork-child.c: Ditto. * frame.c: Ditto. * frame.h: Ditto. * frv-linux-tdep.c: Ditto. * frv-tdep.c: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_string.h: Ditto. * gdb_thread_db.h: Ditto. * gdb_wait.h: Ditto. * gdbarch.sh: Ditto. * gdbcore.h: Ditto. * gdbthread.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * gnu-nat.c: Ditto. * gnu-nat.h: Ditto. * gnu-v2-abi.c: Ditto. * gnu-v3-abi.c: Ditto. * go32-nat.c: Ditto. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate.
2011-01-07 20:36:19 +01:00
/* Print location only, but always include the address. */
2000-01-18 01:55:13 +01:00
LOC_AND_ADDRESS
};
/* Allocate zero initialized memory from the frame cache obstack.
Appendices to the frame info (such as the unwind cache) should
allocate memory using this method. */
extern void *frame_obstack_zalloc (unsigned long size);
2011-01-05 Michael Snyder <msnyder@vmware.com> * addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-05 23:22:53 +01:00
#define FRAME_OBSTACK_ZALLOC(TYPE) \
((TYPE *) frame_obstack_zalloc (sizeof (TYPE)))
#define FRAME_OBSTACK_CALLOC(NUMBER,TYPE) \
((TYPE *) frame_obstack_zalloc ((NUMBER) * sizeof (TYPE)))
Class readonly_detached_regcache This patch adds a new class (type) for readonly regcache, which is created via regcache::save. readonly_detached_regcache inherits readable_regcache. gdb: 2018-02-21 Yao Qi <yao.qi@linaro.org> * dummy-frame.c (dummy_frame_cache) <prev_regcache>: Use readonly_detached_regcache. (dummy_frame_prev_register): Use regcache->cooked_read. * frame.c (frame_save_as_regcache): Change return type. (frame_pop): Update. * frame.h (frame_save_as_regcache): Update declaration. * inferior.h (get_infcall_suspend_state_regcache): Update declaration. * infrun.c (infcall_suspend_state) <registers>: use readonly_detached_regcache. (save_infcall_suspend_state): Don't use regcache_dup. (get_infcall_suspend_state_regcache): Change return type. * linux-fork.c (struct fork_info) <savedregs>: Change to readonly_detached_regcache. <pc>: New field. (fork_save_infrun_state): Don't use regcache_dup. (info_checkpoints_command): Adjust. * mi/mi-main.c (register_changed_p): Update declaration. (mi_cmd_data_list_changed_registers): Use readonly_detached_regcache. (register_changed_p): Change parameter type to readonly_detached_regcache. * ppc-linux-tdep.c (ppu2spu_cache) <regcache>: Use readonly_detached_regcache. (ppu2spu_sniffer): Construct a new readonly_detached_regcache. * regcache.c (readonly_detached_regcache::readonly_detached_regcache): New. (regcache::save): Move it to reg_buffer. (regcache::restore): Change parameter type. (regcache_dup): Remove. * regcache.h (reg_buffer) <save>: New method. (readonly_detached_regcache): New class. * spu-tdep.c (spu2ppu_cache) <regcache>: Use readonly_detached_regcache. (spu2ppu_sniffer): Construct a new readonly_detached_regcache.
2018-02-21 12:20:03 +01:00
class readonly_detached_regcache;
/* Create a regcache, and copy the frame's registers into it. */
Class readonly_detached_regcache This patch adds a new class (type) for readonly regcache, which is created via regcache::save. readonly_detached_regcache inherits readable_regcache. gdb: 2018-02-21 Yao Qi <yao.qi@linaro.org> * dummy-frame.c (dummy_frame_cache) <prev_regcache>: Use readonly_detached_regcache. (dummy_frame_prev_register): Use regcache->cooked_read. * frame.c (frame_save_as_regcache): Change return type. (frame_pop): Update. * frame.h (frame_save_as_regcache): Update declaration. * inferior.h (get_infcall_suspend_state_regcache): Update declaration. * infrun.c (infcall_suspend_state) <registers>: use readonly_detached_regcache. (save_infcall_suspend_state): Don't use regcache_dup. (get_infcall_suspend_state_regcache): Change return type. * linux-fork.c (struct fork_info) <savedregs>: Change to readonly_detached_regcache. <pc>: New field. (fork_save_infrun_state): Don't use regcache_dup. (info_checkpoints_command): Adjust. * mi/mi-main.c (register_changed_p): Update declaration. (mi_cmd_data_list_changed_registers): Use readonly_detached_regcache. (register_changed_p): Change parameter type to readonly_detached_regcache. * ppc-linux-tdep.c (ppu2spu_cache) <regcache>: Use readonly_detached_regcache. (ppu2spu_sniffer): Construct a new readonly_detached_regcache. * regcache.c (readonly_detached_regcache::readonly_detached_regcache): New. (regcache::save): Move it to reg_buffer. (regcache::restore): Change parameter type. (regcache_dup): Remove. * regcache.h (reg_buffer) <save>: New method. (readonly_detached_regcache): New class. * spu-tdep.c (spu2ppu_cache) <regcache>: Use readonly_detached_regcache. (spu2ppu_sniffer): Construct a new readonly_detached_regcache.
2018-02-21 12:20:03 +01:00
std::unique_ptr<readonly_detached_regcache> frame_save_as_regcache
(struct frame_info *this_frame);
constify struct block in some places This makes some spots in gdb, particularly general_symbol_info, use a "const struct block", then fixes the fallout. The justification is that, ordinarily, blocks ought to be readonly. Note though that we can't add "const" in the blockvector due to block relocation. This can be done once blocks are made independent of the program space. 2014-06-18 Tom Tromey <tromey@redhat.com> * varobj.c (varobj_create): Update. * valops.c (value_of_this): Update. * tracepoint.c (add_local_symbols, scope_info): Update. * symtab.h (struct general_symbol_info) <block>: Now const. * symtab.c (skip_prologue_sal) (default_make_symbol_completion_list_break_on) (skip_prologue_using_sal): Update. * stack.h (iterate_over_block_locals) (iterate_over_block_local_vars): Update. * stack.c (print_frame_args): Update. (iterate_over_block_locals, iterate_over_block_local_vars): Make parameter const. (get_selected_block): Make return type const. * python/py-frame.c (frapy_block): Update. * python/py-block.c (gdbpy_block_for_pc): Update. * p-exp.y (%union) <bval>: Now const. * mi/mi-cmd-stack.c (list_args_or_locals): Update. * mdebugread.c (mylookup_symbol, parse_procedure): Update. * m2-exp.y (%union) <bval>: Now const. * linespec.c (get_current_search_block): Make return type const. (create_sals_line_offset, find_label_symbols): Update. * inline-frame.c (inline_frame_sniffer, skip_inline_frames): Update. (block_starting_point_at): Make "block" const. * infrun.c (insert_exception_resume_breakpoint): Make "b" const. (check_exception_resume): Update. * guile/scm-frame.c (gdbscm_frame_block): Update. * guile/scm-block.c (gdbscm_lookup_block): Update. * frame.h (get_frame_block): Update. (get_selected_block): Make return type const. * frame.c (frame_id_inner): Update. * f-valprint.c (info_common_command_for_block) (info_common_command): Update. * dwarf2loc.c (dwarf2_find_location_expression) (dwarf_expr_frame_base, dwarf2_compile_expr_to_ax) (locexpr_describe_location_piece): Update. * c-exp.y (%union) <bval>: Now const. * breakpoint.c (resolve_sal_pc): Update. * blockframe.c (get_frame_block):Make return type const. (get_pc_function_start, get_frame_function, find_pc_sect_function) (block_innermost_frame): Update. * block.h (blockvector_for_pc, blockvector_for_pc_sect) (block_for_pc, block_for_pc_sect): Update. * block.c (blockvector_for_pc_sect, blockvector_for_pc): Make 'pblock' const. (block_for_pc_sect, block_for_pc): Make return type const. * ax-gdb.c (gen_expr): Update. * alpha-mdebug-tdep.c (find_proc_desc): Update. * ada-lang.c (ada_read_renaming_var_value): Make 'block' const. (ada_make_symbol_completion_list, ada_add_exceptions_from_frame) (ada_read_var_value): Update. * ada-exp.y (struct name_info) <block>: Now const. (%union): Likewise. (block_lookup): Constify.
2013-03-12 16:51:37 +01:00
extern const struct block *get_frame_block (struct frame_info *,
CORE_ADDR *addr_in_block);
/* Return the `struct block' that belongs to the selected thread's
selected frame. If the inferior has no state, return NULL.
NOTE: cagney/2002-11-29:
No state? Does the inferior have any execution state (a core file
does, an executable does not). At present the code tests
`target_has_stack' but I'm left wondering if it should test
`target_has_registers' or, even, a merged target_has_state.
Should it look at the most recently specified SAL? If the target
has no state, should this function try to extract a block from the
most recently selected SAL? That way `list foo' would give it some
sort of reference point. Then again, perhaps that would confuse
things.
Calls to this function can be broken down into two categories: Code
that uses the selected block as an additional, but optional, data
point; Code that uses the selected block as a prop, when it should
have the relevant frame/block/pc explicitly passed in.
The latter can be eliminated by correctly parameterizing the code,
the former though is more interesting. Per the "address" command,
it occurs in the CLI code and makes it possible for commands to
work, even when the inferior has no state. */
constify struct block in some places This makes some spots in gdb, particularly general_symbol_info, use a "const struct block", then fixes the fallout. The justification is that, ordinarily, blocks ought to be readonly. Note though that we can't add "const" in the blockvector due to block relocation. This can be done once blocks are made independent of the program space. 2014-06-18 Tom Tromey <tromey@redhat.com> * varobj.c (varobj_create): Update. * valops.c (value_of_this): Update. * tracepoint.c (add_local_symbols, scope_info): Update. * symtab.h (struct general_symbol_info) <block>: Now const. * symtab.c (skip_prologue_sal) (default_make_symbol_completion_list_break_on) (skip_prologue_using_sal): Update. * stack.h (iterate_over_block_locals) (iterate_over_block_local_vars): Update. * stack.c (print_frame_args): Update. (iterate_over_block_locals, iterate_over_block_local_vars): Make parameter const. (get_selected_block): Make return type const. * python/py-frame.c (frapy_block): Update. * python/py-block.c (gdbpy_block_for_pc): Update. * p-exp.y (%union) <bval>: Now const. * mi/mi-cmd-stack.c (list_args_or_locals): Update. * mdebugread.c (mylookup_symbol, parse_procedure): Update. * m2-exp.y (%union) <bval>: Now const. * linespec.c (get_current_search_block): Make return type const. (create_sals_line_offset, find_label_symbols): Update. * inline-frame.c (inline_frame_sniffer, skip_inline_frames): Update. (block_starting_point_at): Make "block" const. * infrun.c (insert_exception_resume_breakpoint): Make "b" const. (check_exception_resume): Update. * guile/scm-frame.c (gdbscm_frame_block): Update. * guile/scm-block.c (gdbscm_lookup_block): Update. * frame.h (get_frame_block): Update. (get_selected_block): Make return type const. * frame.c (frame_id_inner): Update. * f-valprint.c (info_common_command_for_block) (info_common_command): Update. * dwarf2loc.c (dwarf2_find_location_expression) (dwarf_expr_frame_base, dwarf2_compile_expr_to_ax) (locexpr_describe_location_piece): Update. * c-exp.y (%union) <bval>: Now const. * breakpoint.c (resolve_sal_pc): Update. * blockframe.c (get_frame_block):Make return type const. (get_pc_function_start, get_frame_function, find_pc_sect_function) (block_innermost_frame): Update. * block.h (blockvector_for_pc, blockvector_for_pc_sect) (block_for_pc, block_for_pc_sect): Update. * block.c (blockvector_for_pc_sect, blockvector_for_pc): Make 'pblock' const. (block_for_pc_sect, block_for_pc): Make return type const. * ax-gdb.c (gen_expr): Update. * alpha-mdebug-tdep.c (find_proc_desc): Update. * ada-lang.c (ada_read_renaming_var_value): Make 'block' const. (ada_make_symbol_completion_list, ada_add_exceptions_from_frame) (ada_read_var_value): Update. * ada-exp.y (struct name_info) <block>: Now const. (%union): Likewise. (block_lookup): Constify.
2013-03-12 16:51:37 +01:00
extern const struct block *get_selected_block (CORE_ADDR *addr_in_block);
2000-05-28 03:12:42 +02:00
extern struct symbol *get_frame_function (struct frame_info *);
2000-05-28 03:12:42 +02:00
extern CORE_ADDR get_pc_function_start (CORE_ADDR);
2000-05-28 03:12:42 +02:00
extern struct frame_info *find_relative_frame (struct frame_info *, int *);
Emit inferior, thread and frame selection events to all UIs With this patch, when an inferior, thread or frame is explicitly selected by the user, notifications will appear on all CLI and MI UIs. When a GDB console is integrated in a front-end, this allows the front-end to follow a selection made by the user ont he CLI, and it informs the user about selection changes made behind the scenes by the front-end. This patch addresses PR gdb/20487. In order to communicate frame changes to the front-end, this patch adds a new field to the =thread-selected event for the selected frame. The idea is that since inferior/thread/frame can be seen as a composition, it makes sense to send them together in the same event. The vision would be to eventually send the inferior information as well, if we find that it's needed, although the "=thread-selected" event would be ill-named for that job. Front-ends need to handle this new field if they want to follow the frame selection changes that originate from the console. The format of the frame attribute is the same as what is found in the *stopped events. Here's a detailed example for each command and the events they generate: thread ------ 1. CLI command: thread 1.3 MI event: =thread-selected,id="3",frame={...} 2. MI command: -thread-select 3 CLI event: [Switching to thread 1.3 ...] 3. MI command (CLI-in-MI): thread 1.3 MI event/reply: &"thread 1.3\n" ~"#0 child_sub_function () ... =thread-selected,id="3",frame={level="0",...} ^done frame ----- 1. CLI command: frame 1 MI event: =thread-selected,id="3",frame={level="1",...} 2. MI command: -stack-select-frame 1 CLI event: #1 0x00000000004007f0 in child_function... 3. MI command (CLI-in-MI): frame 1 MI event/reply: &"frame 1\n" ~"#1 0x00000000004007f9 in ..." =thread-selected,id="3",frame={level="1"...} ^done inferior -------- Inferior selection events only go from the console to MI, since there's no way to select the inferior in pure MI. 1. CLI command: inferior 2 MI event: =thread-selected,id="3" Note that if the user selects an inferior that is not started or exited, the MI doesn't receive a notification. Since there is no threads to select, the =thread-selected event does not apply... 2. MI command (CLI-in-MI): inferior 2 MI event/reply: &"inferior 2\n" ~"[Switching to inferior 2 ...]" =thread-selected,id="4",frame={level="0"...} ^done Internal implementation detail: this patch makes it possible to suppress notifications caused by a CLI command, like what is done in mi-interp.c. This means that it's now possible to use the add_com_suppress_notification function to register a command with some event suppressed. It is used to implement the select-frame command in this patch. The function command_notifies_uscc_observer was added to extract the rather complicated logical expression from the if statement. It is also now clearer what that logic does: if the command used by the user already notifies the user_selected_context_changed observer, there is not need to notify it again. It therefore protects again emitting the event twice. No regressions, tested on ubuntu 14.04 x86 with target boards unix and native-extended-gdbserver. gdb/ChangeLog: YYYY-MM-DD Antoine Tremblay <antoine.tremblay@ericsson.com> YYYY-MM-DD Simon Marchi <simon.marchi@ericsson.com> PR gdb/20487 * NEWS: Mention new frame field of =thread-selected event. * cli/cli-decode.c (add_cmd): Initialize c->suppress_notification. (add_com_suppress_notification): New function definition. (cmd_func): Set and restore the suppress_notification flag. * cli/cli-deicode.h (struct cmd_list_element) <suppress_notification>: New field. * cli/cli-interp.c (cli_suppress_notification): New global variable. (cli_on_user_selected_context_changed): New function. (_initialize_cli_interp): Attach to user_selected_context_changed observer. * command.h (struct cli_suppress_notification): New structure. (cli_suppress_notification): New global variable declaration. (add_com_suppress_notification): New function declaration. * defs.h (enum user_selected_what_flag): New enum. (user_selected_what): New enum flag type. * frame.h (print_stack_frame_to_uiout): New function declaration. * gdbthread.h (print_selected_thread_frame): New function declaration. * inferior.c (print_selected_inferior): New function definition. (inferior_command): Remove printing of inferior/thread/frame switch notifications, notify user_selected_context_changed observer. * inferior.h (print_selected_inferior): New function declaration. * mi/mi-cmds.c (struct mi_cmd): Add user_selected_context suppression to stack-select-frame and thread-select commands. * mi/mi-interp.c (struct mi_suppress_notification) <user_selected_context>: Initialize. (mi_user_selected_context_changed): New function definition. (_initialize_mi_interp): Attach to user_selected_context_changed. * mi/mi-main.c (mi_cmd_thread_select): Print thread selection reply. (mi_execute_command): Handle notification suppression. Notify user_selected_context_changed observer on thread change instead of printing event directly. Don't send it if command already sends the notification. (command_notifies_uscc_observer): New function. (mi_cmd_execute): Don't handle notification suppression. * mi/mi-main.h (struct mi_suppress_notification) <user_selected_context>: New field. * stack.c (print_stack_frame_to_uiout): New function definition. (select_frame_command): Notify user_selected_context_changed observer. (frame_command): Call print_selected_thread_frame if there's no frame change or notify user_selected_context_changed observer if there is. (up_command): Notify user_selected_context_changed observer. (down_command): Likewise. (_initialize_stack): Suppress user_selected_context notification for command select-frame. * thread.c (thread_command): Notify user_selected_context_changed if the thread has changed, print thread info directly if it hasn't. (do_captured_thread_select): Do not print thread switch event. (print_selected_thread_frame): New function definition. * tui/tui-interp.c (tui_on_user_selected_context_changed): New function definition. (_initialize_tui_interp): Attach to user_selected_context_changed observer. gdb/doc/ChangeLog: PR gdb/20487 * gdb.texinfo (Context management): Update mention of frame change notifications. (gdb/mi Async Records): Document frame field in =thread-select event. * observer.texi (GDB Observers): New user_selected_context_changed observer. gdb/testsuite/ChangeLog: PR gdb/20487 * gdb.mi/mi-pthreads.exp (check_mi_thread_command_set): Adapt =thread-select-event check.
2016-10-03 22:52:44 +02:00
/* Wrapper over print_stack_frame modifying current_uiout with UIOUT for
the function call. */
extern void print_stack_frame_to_uiout (struct ui_out *uiout,
struct frame_info *, int print_level,
enum print_what print_what,
int set_current_sal);
extern void print_stack_frame (struct frame_info *, int print_level,
PR gdb/15911: "info threads" changes the default source and line (for "break", "list") "info threads" changes the default source for "break" and "list", to whatever the location of the first/bottom thread in the thread list is... (gdb) b start (gdb) c ... (gdb) list *lists "start"* (gdb) b 23 Breakpoint 3 at 0x400614: file test.c, line 23. (gdb) info threads Id Target Id Frame * 2 Thread 0x7ffff7fcb700 (LWP 1760) "test" start (arg=0x0) at test.c:23 1 Thread 0x7ffff7fcc740 (LWP 1748) "test" 0x000000323dc08e60 in pthread_join (threadid=140737353922304, thread_return=0x0) at pthread_join.c:93 (gdb) b 23 Breakpoint 4 at 0x323dc08d90: file pthread_join.c, line 23. ^^^^^^^^^^^^^^^ (gdb) list 93 lll_wait_tid (pd->tid); 94 95 96 /* Restore cancellation mode. */ 97 CANCEL_RESET (oldtype); 98 99 /* Remove the handler. */ 100 pthread_cleanup_pop (0); 101 102 The issue is that print_stack_frame always sets the current sal to the frame's sal. print_frame_info (which print_stack_frame calls to do most of the work) also sets the last displayed sal, but only if print_what isn't LOCATION. Now the call in question, from within thread.c:print_thread_info, does pass in LOCATION as print_what, but print_stack_frame doesn't have the same check print_frame_info has. We could consider adding it, but setting these globals depending on print_what isn't very clean, IMO. What we have is two logically distinct operations mixed in the same function(s): #1 - print frame, in the format specified by {print_what, print_level and print_args}. #2 - We're displaying a frame to the user, and I want the default sal to point here, because the program stopped here, or the user did some context-changing command (up, down, etc.). So I added a new parameter to print_stack_frame & friends for point #2, and went through all calls in the tree adjusting as necessary. Tested on x86_64 Fedora 17. gdb/ 2013-09-17 Pedro Alves <palves@redhat.com> PR gdb/15911 * ada-tasks.c (task_command_1): Adjust call to print_stack_frame. * bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd): * corelow.c (core_open): * frame.h (print_stack_frame, print_frame_info): New 'set_current_sal' parameter. * infcmd.c (finish_command, kill_command): Adjust call to print_stack_frame. * inferior.c (inferior_command): Likewise. * infrun.c (normal_stop): Likewise. * linux-fork.c (linux_fork_context): Likewise. * record-full.c (record_full_goto_entry, record_full_restore): Likewise. * remote-mips.c (common_open): Likewise. * stack.c (print_stack_frame): New 'set_current_sal' parameter. Use it. (print_frame_info): New 'set_current_sal' parameter. Set the last displayed sal depending on the new paremeter instead of looking at print_what. (backtrace_command_1, select_and_print_frame, frame_command) (current_frame_command, up_command, down_command): Adjust call to print_stack_frame. * thread.c (print_thread_info, restore_selected_frame) (do_captured_thread_select): Adjust call to print_stack_frame. * tracepoint.c (tfind_1): Likewise. * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames) (mi_cmd_stack_info_frame): Likewise. * mi/mi-interp.c (mi_on_normal_stop): Likewise. * mi/mi-main.c (mi_cmd_exec_return, mi_cmd_trace_find): Likewise. gdb/testsuite/ * gdb.threads/info-threads-cur-sal-2.c: New file. * gdb.threads/info-threads-cur-sal.c: New file. * gdb.threads/info-threads-cur-sal.exp: New file.
2013-09-17 20:26:41 +02:00
enum print_what print_what,
int set_current_sal);
extern void print_frame_info (struct frame_info *, int print_level,
PR gdb/15911: "info threads" changes the default source and line (for "break", "list") "info threads" changes the default source for "break" and "list", to whatever the location of the first/bottom thread in the thread list is... (gdb) b start (gdb) c ... (gdb) list *lists "start"* (gdb) b 23 Breakpoint 3 at 0x400614: file test.c, line 23. (gdb) info threads Id Target Id Frame * 2 Thread 0x7ffff7fcb700 (LWP 1760) "test" start (arg=0x0) at test.c:23 1 Thread 0x7ffff7fcc740 (LWP 1748) "test" 0x000000323dc08e60 in pthread_join (threadid=140737353922304, thread_return=0x0) at pthread_join.c:93 (gdb) b 23 Breakpoint 4 at 0x323dc08d90: file pthread_join.c, line 23. ^^^^^^^^^^^^^^^ (gdb) list 93 lll_wait_tid (pd->tid); 94 95 96 /* Restore cancellation mode. */ 97 CANCEL_RESET (oldtype); 98 99 /* Remove the handler. */ 100 pthread_cleanup_pop (0); 101 102 The issue is that print_stack_frame always sets the current sal to the frame's sal. print_frame_info (which print_stack_frame calls to do most of the work) also sets the last displayed sal, but only if print_what isn't LOCATION. Now the call in question, from within thread.c:print_thread_info, does pass in LOCATION as print_what, but print_stack_frame doesn't have the same check print_frame_info has. We could consider adding it, but setting these globals depending on print_what isn't very clean, IMO. What we have is two logically distinct operations mixed in the same function(s): #1 - print frame, in the format specified by {print_what, print_level and print_args}. #2 - We're displaying a frame to the user, and I want the default sal to point here, because the program stopped here, or the user did some context-changing command (up, down, etc.). So I added a new parameter to print_stack_frame & friends for point #2, and went through all calls in the tree adjusting as necessary. Tested on x86_64 Fedora 17. gdb/ 2013-09-17 Pedro Alves <palves@redhat.com> PR gdb/15911 * ada-tasks.c (task_command_1): Adjust call to print_stack_frame. * bsd-kvm.c (bsd_kvm_open, bsd_kvm_proc_cmd, bsd_kvm_pcb_cmd): * corelow.c (core_open): * frame.h (print_stack_frame, print_frame_info): New 'set_current_sal' parameter. * infcmd.c (finish_command, kill_command): Adjust call to print_stack_frame. * inferior.c (inferior_command): Likewise. * infrun.c (normal_stop): Likewise. * linux-fork.c (linux_fork_context): Likewise. * record-full.c (record_full_goto_entry, record_full_restore): Likewise. * remote-mips.c (common_open): Likewise. * stack.c (print_stack_frame): New 'set_current_sal' parameter. Use it. (print_frame_info): New 'set_current_sal' parameter. Set the last displayed sal depending on the new paremeter instead of looking at print_what. (backtrace_command_1, select_and_print_frame, frame_command) (current_frame_command, up_command, down_command): Adjust call to print_stack_frame. * thread.c (print_thread_info, restore_selected_frame) (do_captured_thread_select): Adjust call to print_stack_frame. * tracepoint.c (tfind_1): Likewise. * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames) (mi_cmd_stack_info_frame): Likewise. * mi/mi-interp.c (mi_on_normal_stop): Likewise. * mi/mi-main.c (mi_cmd_exec_return, mi_cmd_trace_find): Likewise. gdb/testsuite/ * gdb.threads/info-threads-cur-sal-2.c: New file. * gdb.threads/info-threads-cur-sal.c: New file. * gdb.threads/info-threads-cur-sal.exp: New file.
2013-09-17 20:26:41 +02:00
enum print_what print_what, int args,
int set_current_sal);
extern struct frame_info *block_innermost_frame (const struct block *);
extern int deprecated_frame_register_read (struct frame_info *frame, int regnum,
gdb_byte *buf);
/* From stack.c. */
gdb/ Display @entry parameter values (without references). * dwarf2expr.c (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset): New functions. * dwarf2expr.h (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset): New declarations. * dwarf2loc.c (dwarf2_find_location_expression): Support location list entry record. (dwarf_entry_parameter_to_value, value_of_dwarf_reg_entry) (value_of_dwarf_block_entry, locexpr_read_variable_at_entry): New functions. (dwarf2_locexpr_funcs): Install locexpr_read_variable_at_entry. (loclist_read_variable_at_entry): New function. (dwarf2_loclist_funcs): Install loclist_read_variable_at_entry. * dwarf2read.c (read_call_site_scope): Support also DW_OP_fbreg in DW_AT_location, call dwarf_block_to_sp_offset for it. * frame.h (print_entry_values_no, print_entry_values_only) (print_entry_values_preferred, print_entry_values_if_needed) (print_entry_values_both, print_entry_values_compact) (print_entry_values_default, print_entry_values): New declarations. (struct frame_arg): New field entry_kind. (read_frame_arg): New parameter entryargp. * mi/mi-cmd-stack.c (list_arg_or_local): New gdb_assert for arg->entry_kind. Optionally print the `@entry' suffix. (list_args_or_locals): New variable entryarg, initialize it. Initialize also entry_kind of arg and entryarg. Conditionalize list_arg_or_local for arg, add list_arg_or_local for entryarg. Call xfree for entryarg.error. * stack.c (print_entry_values_no, print_entry_values_only) (print_entry_values_preferred, print_entry_values_if_needed) (print_entry_values_both, print_entry_values_compact) (print_entry_values_default, print_entry_values_choices) (print_entry_values): New variables. (print_frame_arg): New gdb_assert for arg->entry_kind. Optionally print the `@entry' suffix, possibly in combination for print_entry_values_compact. (read_frame_arg): New parameter entryargp, new variables entryval, entryval_error and val_equal. Read in also entryargp, respect print_entry_values, compare the values using val_equal, fill in also argp->entry_kind (together with entryargp->entry_kind). (print_frame_args): New variable entryarg, initialize it. Conditionalize print_frame_arg for arg, add print_frame_arg for entryarg. Call xfree for entryarg.error. (_initialize_stack): Call add_setshow_enum_cmd for `entry-values'. * symtab.h (struct symbol_computed_ops): New field read_variable_at_entry. gdb/doc/ Display @entry parameter values (without references). * gdb.texinfo (Tail Call Frames): Add anchor. Add self tail call example. (Print Settings): New description of set print entry-values and show print entry-values. gdb/testsuite/ Display @entry parameter values (without references). * gdb.arch/amd64-entry-value.cc (locexpr, stacktest, data, data2) (different, validity, invalid): New functions. (main): Call them. * gdb.arch/amd64-entry-value.exp: New breakpoints breakhere_locexpr, stacktest, breakhere_stacktest, different, breakhere_different, breakhere_validity and breakhere_invalid. (entry: bt): Update for @entry. (entry_locexpr: *, entry_stack: *, entry_equal: *, entry_different: *) (entry_validity: *, entry_invalid: *): Many new tests. * gdb.base/break.exp (run until breakpoint set at small function, optimized file): Accept also the @entry suffix. * gdb.mi/Makefile.in (PROGS): Add mi2-amd64-entry-value. * gdb.mi/mi2-amd64-entry-value.c: New files. * gdb.mi/mi2-amd64-entry-value.exp: New files.
2011-10-09 21:34:19 +02:00
extern const char print_entry_values_no[];
extern const char print_entry_values_only[];
extern const char print_entry_values_preferred[];
extern const char print_entry_values_if_needed[];
extern const char print_entry_values_both[];
extern const char print_entry_values_compact[];
extern const char print_entry_values_default[];
extern const char *print_entry_values;
/* Inferior function parameter value read in from a frame. */
struct frame_arg
{
/* Symbol for this parameter used for example for its name. */
struct symbol *sym;
/* Value of the parameter. It is NULL if ERROR is not NULL; if both VAL and
ERROR are NULL this parameter's value should not be printed. */
struct value *val;
/* String containing the error message, it is more usually NULL indicating no
error occured reading this parameter. */
char *error;
gdb/ Display @entry parameter values (without references). * dwarf2expr.c (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset): New functions. * dwarf2expr.h (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset): New declarations. * dwarf2loc.c (dwarf2_find_location_expression): Support location list entry record. (dwarf_entry_parameter_to_value, value_of_dwarf_reg_entry) (value_of_dwarf_block_entry, locexpr_read_variable_at_entry): New functions. (dwarf2_locexpr_funcs): Install locexpr_read_variable_at_entry. (loclist_read_variable_at_entry): New function. (dwarf2_loclist_funcs): Install loclist_read_variable_at_entry. * dwarf2read.c (read_call_site_scope): Support also DW_OP_fbreg in DW_AT_location, call dwarf_block_to_sp_offset for it. * frame.h (print_entry_values_no, print_entry_values_only) (print_entry_values_preferred, print_entry_values_if_needed) (print_entry_values_both, print_entry_values_compact) (print_entry_values_default, print_entry_values): New declarations. (struct frame_arg): New field entry_kind. (read_frame_arg): New parameter entryargp. * mi/mi-cmd-stack.c (list_arg_or_local): New gdb_assert for arg->entry_kind. Optionally print the `@entry' suffix. (list_args_or_locals): New variable entryarg, initialize it. Initialize also entry_kind of arg and entryarg. Conditionalize list_arg_or_local for arg, add list_arg_or_local for entryarg. Call xfree for entryarg.error. * stack.c (print_entry_values_no, print_entry_values_only) (print_entry_values_preferred, print_entry_values_if_needed) (print_entry_values_both, print_entry_values_compact) (print_entry_values_default, print_entry_values_choices) (print_entry_values): New variables. (print_frame_arg): New gdb_assert for arg->entry_kind. Optionally print the `@entry' suffix, possibly in combination for print_entry_values_compact. (read_frame_arg): New parameter entryargp, new variables entryval, entryval_error and val_equal. Read in also entryargp, respect print_entry_values, compare the values using val_equal, fill in also argp->entry_kind (together with entryargp->entry_kind). (print_frame_args): New variable entryarg, initialize it. Conditionalize print_frame_arg for arg, add print_frame_arg for entryarg. Call xfree for entryarg.error. (_initialize_stack): Call add_setshow_enum_cmd for `entry-values'. * symtab.h (struct symbol_computed_ops): New field read_variable_at_entry. gdb/doc/ Display @entry parameter values (without references). * gdb.texinfo (Tail Call Frames): Add anchor. Add self tail call example. (Print Settings): New description of set print entry-values and show print entry-values. gdb/testsuite/ Display @entry parameter values (without references). * gdb.arch/amd64-entry-value.cc (locexpr, stacktest, data, data2) (different, validity, invalid): New functions. (main): Call them. * gdb.arch/amd64-entry-value.exp: New breakpoints breakhere_locexpr, stacktest, breakhere_stacktest, different, breakhere_different, breakhere_validity and breakhere_invalid. (entry: bt): Update for @entry. (entry_locexpr: *, entry_stack: *, entry_equal: *, entry_different: *) (entry_validity: *, entry_invalid: *): Many new tests. * gdb.base/break.exp (run until breakpoint set at small function, optimized file): Accept also the @entry suffix. * gdb.mi/Makefile.in (PROGS): Add mi2-amd64-entry-value. * gdb.mi/mi2-amd64-entry-value.c: New files. * gdb.mi/mi2-amd64-entry-value.exp: New files.
2011-10-09 21:34:19 +02:00
/* One of the print_entry_values_* entries as appropriate specifically for
this frame_arg. It will be different from print_entry_values. With
print_entry_values_no this frame_arg should be printed as a normal
parameter. print_entry_values_only says it should be printed as entry
value parameter. print_entry_values_compact says it should be printed as
both as a normal parameter and entry values parameter having the same
value - print_entry_values_compact is not permitted fi ui_out_is_mi_like_p
(in such case print_entry_values_no and print_entry_values_only is used
for each parameter kind specifically. */
const char *entry_kind;
};
extern void read_frame_arg (struct symbol *sym, struct frame_info *frame,
gdb/ Display @entry parameter values (without references). * dwarf2expr.c (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset): New functions. * dwarf2expr.h (dwarf_block_to_fb_offset, dwarf_block_to_sp_offset): New declarations. * dwarf2loc.c (dwarf2_find_location_expression): Support location list entry record. (dwarf_entry_parameter_to_value, value_of_dwarf_reg_entry) (value_of_dwarf_block_entry, locexpr_read_variable_at_entry): New functions. (dwarf2_locexpr_funcs): Install locexpr_read_variable_at_entry. (loclist_read_variable_at_entry): New function. (dwarf2_loclist_funcs): Install loclist_read_variable_at_entry. * dwarf2read.c (read_call_site_scope): Support also DW_OP_fbreg in DW_AT_location, call dwarf_block_to_sp_offset for it. * frame.h (print_entry_values_no, print_entry_values_only) (print_entry_values_preferred, print_entry_values_if_needed) (print_entry_values_both, print_entry_values_compact) (print_entry_values_default, print_entry_values): New declarations. (struct frame_arg): New field entry_kind. (read_frame_arg): New parameter entryargp. * mi/mi-cmd-stack.c (list_arg_or_local): New gdb_assert for arg->entry_kind. Optionally print the `@entry' suffix. (list_args_or_locals): New variable entryarg, initialize it. Initialize also entry_kind of arg and entryarg. Conditionalize list_arg_or_local for arg, add list_arg_or_local for entryarg. Call xfree for entryarg.error. * stack.c (print_entry_values_no, print_entry_values_only) (print_entry_values_preferred, print_entry_values_if_needed) (print_entry_values_both, print_entry_values_compact) (print_entry_values_default, print_entry_values_choices) (print_entry_values): New variables. (print_frame_arg): New gdb_assert for arg->entry_kind. Optionally print the `@entry' suffix, possibly in combination for print_entry_values_compact. (read_frame_arg): New parameter entryargp, new variables entryval, entryval_error and val_equal. Read in also entryargp, respect print_entry_values, compare the values using val_equal, fill in also argp->entry_kind (together with entryargp->entry_kind). (print_frame_args): New variable entryarg, initialize it. Conditionalize print_frame_arg for arg, add print_frame_arg for entryarg. Call xfree for entryarg.error. (_initialize_stack): Call add_setshow_enum_cmd for `entry-values'. * symtab.h (struct symbol_computed_ops): New field read_variable_at_entry. gdb/doc/ Display @entry parameter values (without references). * gdb.texinfo (Tail Call Frames): Add anchor. Add self tail call example. (Print Settings): New description of set print entry-values and show print entry-values. gdb/testsuite/ Display @entry parameter values (without references). * gdb.arch/amd64-entry-value.cc (locexpr, stacktest, data, data2) (different, validity, invalid): New functions. (main): Call them. * gdb.arch/amd64-entry-value.exp: New breakpoints breakhere_locexpr, stacktest, breakhere_stacktest, different, breakhere_different, breakhere_validity and breakhere_invalid. (entry: bt): Update for @entry. (entry_locexpr: *, entry_stack: *, entry_equal: *, entry_different: *) (entry_validity: *, entry_invalid: *): Many new tests. * gdb.base/break.exp (run until breakpoint set at small function, optimized file): Accept also the @entry suffix. * gdb.mi/Makefile.in (PROGS): Add mi2-amd64-entry-value. * gdb.mi/mi2-amd64-entry-value.c: New files. * gdb.mi/mi2-amd64-entry-value.exp: New files.
2011-10-09 21:34:19 +02:00
struct frame_arg *argp,
struct frame_arg *entryargp);
extern void read_frame_local (struct symbol *sym, struct frame_info *frame,
struct frame_arg *argp);
Constify add_info This patch constifies add_info and updates all the info commands. The bulk of this patch was written using a script; and then I did a manual pass to fix up the remaining compilation errors. I could not compile every changed file; in particular nto-procfs.c, gnu-nat.c, and darwin-nat-info.c; but I at least tried to check the correctness by inspection. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * frame.h (info_locals_command, info_args_command): Constify. * auto-load.h (auto_load_info_scripts): Constify. * inferior.h (registers_info): Constify. * copying.c: Rebuild. * copying.awk: Constify generated commands. * auto-load.c (auto_load_info_scripts) (info_auto_load_gdb_scripts): Constify. * cli/cli-decode.c (struct cmd_list_element): Take a cmd_const_cfunc_ftype. * command.h (add_info): Take a cmd_const_cfunc_ftype. * tui/tui-win.c (tui_all_windows_info): Constify. * python/py-auto-load.c (info_auto_load_python_scripts): Constify. * cli/cli-cmds.c (show_command): Remove non-const overload. * tracepoint.c (info_tvariables_command, info_scope_command): Constify. (info_static_tracepoint_markers_command): Constify. * thread.c (info_threads_command): Constify. (print_thread_info_1): Constify. * target.c (info_target_command): Constify. * symtab.c (info_sources_command, info_functions_command) (info_types_command): Constify. (info_variables_command): Remove non-const overload. * symfile.c (info_ext_lang_command): Constify. * stack.c (info_frame_command, info_locals_command) (info_args_command): Constify. (backtrace_command): Remove non-const overload. * source.c (info_source_command, info_line_command): Constify. * solib.c (info_sharedlibrary_command): Constify. * skip.c (info_skip_command): Constify. * ser-go32.c (info_serial_command): Constify. * reverse.c (info_bookmarks_command): Constify. * printcmd.c (info_symbol_command, info_address_command) (info_display_command): Constify. * osdata.c (info_osdata_command): Constify. * objc-lang.c (info_selectors_command, info_classes_command): Constify. * nto-procfs.c (procfs_pidlist, procfs_meminfo): Constify. * memattr.c (info_mem_command): Constify. * macrocmd.c (info_macro_command, info_macros_command): Constify. * linux-fork.c (info_checkpoints_command): Constify. * infrun.c (info_signals_command): Constify. * inflow.c (info_terminal_command): Constify. * inferior.c (info_inferiors_command): Constify. (print_inferior): Constify. * infcmd.c (info_program_command, info_all_registers_command) (info_registers_command, info_vector_command) (info_float_command): Constify. (registers_info): Constify. * gnu-nat.c (info_send_rights_cmd, info_recv_rights_cmd) (info_port_sets_cmd, info_dead_names_cmd, info_port_rights_cmd): Constify. * f-valprint.c (info_common_command): Constify. * dcache.c (info_dcache_command): Constify. (dcache_info_1): Constify. * darwin-nat-info.c (info_mach_tasks_command) (info_mach_task_command, info_mach_ports_command) (info_mach_port_command, info_mach_threads_command) (info_mach_thread_command, info_mach_regions_command) (info_mach_regions_recurse_command, info_mach_region_command) (info_mach_exceptions_command): Constify. (get_task_from_args): Constify. * cp-support.c (info_vtbl_command): Constify. * breakpoint.c (info_watchpoints_command) (info_tracepoints_command): Constify. (info_breakpoints_command): Remove non-const overload. * avr-tdep.c (avr_io_reg_read_command): Constify. * auxv.c (info_auxv_command): Constify. * ada-tasks.c (info_tasks_command): Constify. (info_task): Constify. * ada-lang.c (info_exceptions_command): Constify.
2017-10-14 06:07:26 +02:00
extern void info_args_command (const char *, int);
Constify add_info This patch constifies add_info and updates all the info commands. The bulk of this patch was written using a script; and then I did a manual pass to fix up the remaining compilation errors. I could not compile every changed file; in particular nto-procfs.c, gnu-nat.c, and darwin-nat-info.c; but I at least tried to check the correctness by inspection. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * frame.h (info_locals_command, info_args_command): Constify. * auto-load.h (auto_load_info_scripts): Constify. * inferior.h (registers_info): Constify. * copying.c: Rebuild. * copying.awk: Constify generated commands. * auto-load.c (auto_load_info_scripts) (info_auto_load_gdb_scripts): Constify. * cli/cli-decode.c (struct cmd_list_element): Take a cmd_const_cfunc_ftype. * command.h (add_info): Take a cmd_const_cfunc_ftype. * tui/tui-win.c (tui_all_windows_info): Constify. * python/py-auto-load.c (info_auto_load_python_scripts): Constify. * cli/cli-cmds.c (show_command): Remove non-const overload. * tracepoint.c (info_tvariables_command, info_scope_command): Constify. (info_static_tracepoint_markers_command): Constify. * thread.c (info_threads_command): Constify. (print_thread_info_1): Constify. * target.c (info_target_command): Constify. * symtab.c (info_sources_command, info_functions_command) (info_types_command): Constify. (info_variables_command): Remove non-const overload. * symfile.c (info_ext_lang_command): Constify. * stack.c (info_frame_command, info_locals_command) (info_args_command): Constify. (backtrace_command): Remove non-const overload. * source.c (info_source_command, info_line_command): Constify. * solib.c (info_sharedlibrary_command): Constify. * skip.c (info_skip_command): Constify. * ser-go32.c (info_serial_command): Constify. * reverse.c (info_bookmarks_command): Constify. * printcmd.c (info_symbol_command, info_address_command) (info_display_command): Constify. * osdata.c (info_osdata_command): Constify. * objc-lang.c (info_selectors_command, info_classes_command): Constify. * nto-procfs.c (procfs_pidlist, procfs_meminfo): Constify. * memattr.c (info_mem_command): Constify. * macrocmd.c (info_macro_command, info_macros_command): Constify. * linux-fork.c (info_checkpoints_command): Constify. * infrun.c (info_signals_command): Constify. * inflow.c (info_terminal_command): Constify. * inferior.c (info_inferiors_command): Constify. (print_inferior): Constify. * infcmd.c (info_program_command, info_all_registers_command) (info_registers_command, info_vector_command) (info_float_command): Constify. (registers_info): Constify. * gnu-nat.c (info_send_rights_cmd, info_recv_rights_cmd) (info_port_sets_cmd, info_dead_names_cmd, info_port_rights_cmd): Constify. * f-valprint.c (info_common_command): Constify. * dcache.c (info_dcache_command): Constify. (dcache_info_1): Constify. * darwin-nat-info.c (info_mach_tasks_command) (info_mach_task_command, info_mach_ports_command) (info_mach_port_command, info_mach_threads_command) (info_mach_thread_command, info_mach_regions_command) (info_mach_regions_recurse_command, info_mach_region_command) (info_mach_exceptions_command): Constify. (get_task_from_args): Constify. * cp-support.c (info_vtbl_command): Constify. * breakpoint.c (info_watchpoints_command) (info_tracepoints_command): Constify. (info_breakpoints_command): Remove non-const overload. * avr-tdep.c (avr_io_reg_read_command): Constify. * auxv.c (info_auxv_command): Constify. * ada-tasks.c (info_tasks_command): Constify. (info_task): Constify. * ada-lang.c (info_exceptions_command): Constify.
2017-10-14 06:07:26 +02:00
extern void info_locals_command (const char *, int);
Constify add_com This changes add_com to take a cmd_const_cfunc_ftype, and then fixes up all the command implementations. In most cases this is trivial. In a couple of places I had to again introduce a temporary non-const overload. These overloads will be removed when add_info is constified. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * solib.h (no_shared_libraries): Constify. * frame.h (return_command): Constify. * cli/cli-cmds.h (quit_command): Constify. * top.h (quit_command, execute_command): Constify. * target.h (flash_erase_command): Constify. * inferior.h (set_inferior_args, attach_command): Constify. * tracepoint.h (start_tracing, stop_tracing): Constify. * breakpoint.h (break_command, tbreak_command) (hbreak_command_wrapper, thbreak_command_wrapper) (rbreak_command_wrapper, watch_command_wrapper) (awatch_command_wrapper, rwatch_command_wrapper) (get_tracepoint_by_number): Constify. * symtab.c (info_variables_command, rbreak_command) (symtab_symbol_info): Constify. (info_variables_command): Add non-const overload. * top.c (dont_repeat_command): Constify. * breakpoint.c (ignore_command, commands_command) (condition_command, tbreak_command, hbreak_command) (thbreak_command, clear_command, break_command) (info_breakpoints_command, watch_command, rwatch_command) (awatch_command, trace_command, ftrace_command, strace_command) (trace_pass_command, break_range_command, dprintf_command) (agent_printf_command, get_tracepoint_by_number) (watch_maybe_just_location, trace_pass_command): Constify. (info_breakpoints_command): Add non-const overload. * tracefile.c (tsave_command): Constify. * infcmd.c (attach_command, disconnect_command, signal_command) (queue_signal_command, stepi_command, nexti_command) (finish_command, next_command, step_command, until_command) (advance_command, jump_command, continue_command, run_command) (start_command, starti_command, interrupt_command) (run_command_1, set_inferior_args, step_1): Constify. * inferior.c (add_inferior_command, remove_inferior_command) (clone_inferior_command): Constify. * linux-fork.c (checkpoint_command, restart_command): Constify. * windows-nat.c (signal_event_command): Constify. * guile/guile.c (guile_repl_command, guile_command): Constify. * printcmd.c (x_command, display_command, printf_command) (output_command, set_command, call_command, print_command) (eval_command): Constify. (non_const_set_command): Remove. (_initialize_printcmd): Update. * source.c (forward_search_command, reverse_search_command): Constify. * jit.c (jit_reader_load_command, jit_reader_unload_command): Constify. * infrun.c (handle_command): Constify. * memattr.c (mem_command): Constify. * stack.c (return_command, up_command, up_silently_command) (down_command, down_silently_command, frame_command) (backtrace_command, func_command, backtrace_command_1): Constify. (backtrace_command): Add non-const overload. * remote-sim.c (simulator_command): Constify. * exec.c (set_section_command): Constify. * tracepoint.c (tdump_command, trace_variable_command) (tstatus_command, tstop_command, tstart_command) (end_actions_pseudocommand, while_stepping_pseudocommand) (collect_pseudocommand, teval_pseudocommand, actions_command) (start_tracing, stop_tracing): Constify. * value.c (init_if_undefined_command): Constify. * tui/tui-stack.c (tui_update_command): Constify. * tui/tui-win.c (tui_refresh_all_command) (tui_set_tab_width_command, tui_set_win_height_command) (tui_set_focus_command, tui_scroll_forward_command) (tui_scroll_backward_command, tui_scroll_left_command) (tui_scroll_right_command, parse_scrolling_args, tui_set_focus) (tui_set_win_height): Constify. * tui/tui-layout.c (tui_layout_command): Constify. * procfs.c (proc_trace_syscalls, proc_trace_sysentry_cmd) (proc_trace_sysexit_cmd, proc_untrace_sysentry_cmd) (proc_untrace_sysexit_cmd): Constify. * remote.c (threadlist_test_cmd, threadinfo_test_cmd) (threadset_test_cmd, threadlist_update_test_cmd) (threadalive_test): Constify. * objc-lang.c (print_object_command): Constify. * command.h (add_com): Constify. * cli/cli-dump.c (restore_command): Constify. * cli/cli-cmds.c (pwd_command, echo_command, quit_command) (help_command, complete_command, shell_command, edit_command) (list_command, disassemble_command, make_command) (apropos_command, alias_command): Constify. * cli/cli-script.c (document_command, define_command) (while_command, if_command, validate_comname): Constify. * cli/cli-decode.c (struct cmd_list_element): Change type of "fun". * target.c (do_monitor_command, flash_erase_command): Constify. * regcache.c (reg_flush_command): Constify. * reverse.c (reverse_step, reverse_next, reverse_stepi) (reverse_nexti, reverse_continue, reverse_finish) (save_bookmark_command, goto_bookmark_command) (exec_reverse_once): Constify. * python/python.c (python_interactive_command, python_command): Constify. * typeprint.c (ptype_command, whatis_command, whatis_exp): Constify. * solib.c (sharedlibrary_command, no_shared_libraries): Constify. * gcore.c (gcore_command): Constify.
2017-10-11 23:43:01 +02:00
extern void return_command (const char *, int);
Convert frame unwinders to use the current frame and "struct value". * frame.c (frame_debug): Make global. (get_frame_id): Pass this frame to unwinder routines. (frame_pc_unwind): Remove unused unwind->prev_pc support. (do_frame_register_read): Do not discard the return value of frame_register_read. (frame_register_unwind): Remove debug messages. Use frame_unwind_register_value. (frame_unwind_register_value, get_frame_register_value): New functions. (create_new_frame, get_frame_base_address, get_frame_locals_address) (get_frame_args_address, get_frame_type): Pass this frame to unwinder routines. (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New functions. * frame.h: Update comments. (frame_debug, frame_unwind_register_value, get_frame_register_value) (frame_prepare_for_sniffer): Declare. * frame-unwind.h: Update comments and parameter names. (default_frame_sniffer): Declare. (frame_prev_register_ftype): Return a struct value *. (struct frame_unwind): Remove prev_pc member. (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): Declare. * frame-base.h: Update comments and parameter names. * valops.c (value_fetch_lazy): Use get_frame_register_value. Iterate if necessary. Add debugging output. * sentinel-frame.c (sentinel_frame_prev_register) (sentinel_frame_this_id): Update for new signature. (sentinel_frame_prev_pc): Delete. (sentinel_frame_unwinder): Remove prev_pc. * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize prev_pc. * libunwind-frame.c (libunwind_frame_unwind): Likewise. * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer. (frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder): New function. (frame_unwind_find_by_frame): Take this frame. Only use sniffers from unwinders. Use frame_prepare_for_sniffer. (default_frame_sniffer, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): New functions. * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id. (dummy_frame_prev_register, dummy_frame_this_id): Update for new signature. * gdbarch.sh: Replace unwind_dummy_id with dummy_id. * gdbarch.c, gdbarch.c: Regenerated. * frame-base.c (default_frame_base_address) (default_frame_locals_address, default_frame_args_address): Update for new signature. (frame_base_find_by_frame): Pass this frame to unwinder routines. * infcall.c (call_function_by_hand): Update comments. * Makefile.in (frame-unwind.o): Update dependencies. * gdbint.texinfo (Stack Frames): New chapter. (Algorithms): Move Frames text to the new chapter. (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS. Document gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
2008-04-30 23:16:46 +02:00
/* Set FRAME's unwinder temporarily, so that we can call a sniffer.
If sniffing fails, the caller should be sure to call
frame_cleanup_after_sniffer. */
Convert frame unwinders to use the current frame and "struct value". * frame.c (frame_debug): Make global. (get_frame_id): Pass this frame to unwinder routines. (frame_pc_unwind): Remove unused unwind->prev_pc support. (do_frame_register_read): Do not discard the return value of frame_register_read. (frame_register_unwind): Remove debug messages. Use frame_unwind_register_value. (frame_unwind_register_value, get_frame_register_value): New functions. (create_new_frame, get_frame_base_address, get_frame_locals_address) (get_frame_args_address, get_frame_type): Pass this frame to unwinder routines. (frame_cleanup_after_sniffer, frame_prepare_for_sniffer): New functions. * frame.h: Update comments. (frame_debug, frame_unwind_register_value, get_frame_register_value) (frame_prepare_for_sniffer): Declare. * frame-unwind.h: Update comments and parameter names. (default_frame_sniffer): Declare. (frame_prev_register_ftype): Return a struct value *. (struct frame_unwind): Remove prev_pc member. (frame_unwind_sniffer_ftype, frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): Declare. * frame-base.h: Update comments and parameter names. * valops.c (value_fetch_lazy): Use get_frame_register_value. Iterate if necessary. Add debugging output. * sentinel-frame.c (sentinel_frame_prev_register) (sentinel_frame_this_id): Update for new signature. (sentinel_frame_prev_pc): Delete. (sentinel_frame_unwinder): Remove prev_pc. * ia64-tdep.c (ia64_libunwind_frame_unwind): Do not initialize prev_pc. * libunwind-frame.c (libunwind_frame_unwind): Likewise. * frame-unwind.c (struct frame_unwind_table_entry): Remove sniffer. (frame_unwind_append_sniffer): Delete. (frame_unwind_append_unwinder): New function. (frame_unwind_find_by_frame): Take this frame. Only use sniffers from unwinders. Use frame_prepare_for_sniffer. (default_frame_sniffer, frame_unwind_got_optimized) (frame_unwind_got_register, frame_unwind_got_memory) (frame_unwind_got_constant, frame_unwind_got_address): New functions. * dummy-frame.c (dummy_frame_sniffer): Use gdbarch_dummy_id. (dummy_frame_prev_register, dummy_frame_this_id): Update for new signature. * gdbarch.sh: Replace unwind_dummy_id with dummy_id. * gdbarch.c, gdbarch.c: Regenerated. * frame-base.c (default_frame_base_address) (default_frame_locals_address, default_frame_args_address): Update for new signature. (frame_base_find_by_frame): Pass this frame to unwinder routines. * infcall.c (call_function_by_hand): Update comments. * Makefile.in (frame-unwind.o): Update dependencies. * gdbint.texinfo (Stack Frames): New chapter. (Algorithms): Move Frames text to the new chapter. (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS. Document gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
2008-04-30 23:16:46 +02:00
extern void frame_prepare_for_sniffer (struct frame_info *frame,
const struct frame_unwind *unwind);
/* Clean up after a failed (wrong unwinder) attempt to unwind past
FRAME. */
extern void frame_cleanup_after_sniffer (struct frame_info *frame);
/* Notes (cagney/2002-11-27, drow/2003-09-06):
You might think that calls to this function can simply be replaced by a
call to get_selected_frame().
Unfortunately, it isn't that easy.
The relevant code needs to be audited to determine if it is
possible (or practical) to instead pass the applicable frame in as a
parameter. For instance, DEPRECATED_DO_REGISTERS_INFO() relied on
the deprecated_selected_frame global, while its replacement,
PRINT_REGISTERS_INFO(), is parameterized with the selected frame.
The only real exceptions occur at the edge (in the CLI code) where
user commands need to pick up the selected frame before proceeding.
There are also some functions called with a NULL frame meaning either "the
program is not running" or "use the selected frame".
This is important. GDB is trying to stamp out the hack:
saved_frame = deprecated_safe_get_selected_frame ();
select_frame (...);
hack_using_global_selected_frame ();
select_frame (saved_frame);
Take care!
This function calls get_selected_frame if the inferior should have a
frame, or returns NULL otherwise. */
extern struct frame_info *deprecated_safe_get_selected_frame (void);
/* Create a frame using the specified BASE and PC. */
extern struct frame_info *create_new_frame (CORE_ADDR base, CORE_ADDR pc);
/* Return true if the frame unwinder for frame FI is UNWINDER; false
otherwise. */
extern int frame_unwinder_is (struct frame_info *fi,
const struct frame_unwind *unwinder);
/* Return the language of FRAME. */
extern enum language get_frame_language (struct frame_info *frame);
/* Return the first non-tailcall frame above FRAME or FRAME if it is not a
btrace, frame: fix crash in get_frame_type In skip_artificial_frames we repeatedly call get_prev_frame_always until we get a non-inline and non-tailcall frame assuming that there must be such a frame eventually. For record targets, however, we may have a frame chain that consists only of artificial frames. This leads to a crash in get_frame_type when dereferencing a NULL frame pointer. Change skip_artificial_frames and skip_tailcall_frames to return NULL in such a case and modify each caller to cope with a NULL return. In frame_unwind_caller_pc and frame_unwind_caller_arch, we simply assert that the returned value is not NULL. Their caller was supposed to check frame_unwind_caller_id before calling those functions. In other cases, we thrown an error. In infcmd further move the skip_tailcall_frames call to the forward-stepping case since we don't need a frame for reverse execution and we don't want to fail because of that. Reverse-finish does make sense for a tailcall frame. gdb/ * frame.h (skip_tailcall_frames): Update comment. * frame.c (skip_artificial_frames, skip_tailcall_frames): Return NULL if only artificial frames are found. Update comment. (frame_unwind_caller_id): Handle NULL return. (frame_unwind_caller_pc, frame_unwind_caller_arch): Assert that skip_artificial_frames does not return NULL. (frame_pop): Add an error if only tailcall frames are found. * infcmd.c (finish_command): Move skip_tailcall_frames call into forward- execution case. Add an error if only tailcall frames are found. testsuite/ * gdb.btrace/tailcall-only.exp: New. * gdb.btrace/tailcall-only.c: New. * gdb.btrace/x86_64-tailcall-only.S: New. * gdb.btrace/i686-tailcall-only.S: New.
2016-01-26 14:58:44 +01:00
tailcall frame. Return NULL if FRAME is the start of a tailcall-only
chain. */
extern struct frame_info *skip_tailcall_frames (struct frame_info *frame);
Skip unwritable frames in command "finish" Nowadays, GDB can't insert breakpoint on the return address of the exception handler on ARM M-profile, because the address is a magic one 0xfffffff9, (gdb) bt #0 CT32B1_IRQHandler () at ../src/timer.c:67 #1 <signal handler called> #2 main () at ../src/timer.c:127 (gdb) info frame Stack level 0, frame at 0x200ffa8: pc = 0x4ec in CT32B1_IRQHandler (../src/timer.c:67); saved pc = 0xfffffff9 called by frame at 0x200ffc8 source language c. Arglist at 0x200ffa0, args: Locals at 0x200ffa0, Previous frame's sp is 0x200ffa8 Saved registers: r7 at 0x200ffa0, lr at 0x200ffa4 (gdb) x/x 0xfffffff9 0xfffffff9: Cannot access memory at address 0xfffffff9 (gdb) finish Run till exit from #0 CT32B1_IRQHandler () at ../src/timer.c:67 Ed:15: Target error from Set break/watch: Et:96: Pseudo-address (0xFFFFFFxx) for EXC_RETURN is invalid (GDB error?) Warning: Cannot insert hardware breakpoint 0. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. Command aborted. even some debug probe can't set hardware breakpoint on the magic address too, (gdb) hbreak *0xfffffff9 Hardware assisted breakpoint 2 at 0xfffffff9 (gdb) c Continuing. Ed:15: Target error from Set break/watch: Et:96: Pseudo-address (0xFFFFFFxx) for EXC_RETURN is invalid (GDB error?) Warning: Cannot insert hardware breakpoint 2. Could not insert hardware breakpoints: You may have requested too many hardware breakpoints/watchpoints. Command aborted. The problem described above is quite similar to PR 8841, in which GDB can't set breakpoint on signal trampoline, which is mapped to a read-only page by kernel. The rationale of this patch is to skip "unwritable" frames when looking for caller frames in command "finish", and a new gdbarch method code_of_frame_writable is added. This patch fixes the problem on ARM cortex-m target, but it can be used to fix PR 8841 too. gdb: 2016-05-10 Yao Qi <yao.qi@arm.com> * arch-utils.c (default_code_of_frame_writable): New function. * arch-utils.h (default_code_of_frame_writable): Declare. * arm-tdep.c (arm_code_of_frame_writable): New function. (arm_gdbarch_init): Install gdbarch method code_of_frame_writable if the target is M-profile. * frame.c (skip_unwritable_frames): New function. * frame.h (skip_unwritable_frames): Declare. * gdbarch.sh (code_of_frame_writable): New. * gdbarch.c, gdbarch.h: Re-generated. * infcmd.c (finish_command): Call skip_unwritable_frames.
2016-05-23 18:32:56 +02:00
/* Return the first frame above FRAME or FRAME of which the code is
writable. */
extern struct frame_info *skip_unwritable_frames (struct frame_info *frame);
#endif /* !defined (FRAME_H) */