binutils-gdb/gdb/i386-cygwin-tdep.c

301 lines
7.9 KiB
C
Raw Normal View History

/* Target-dependent code for Cygwin running on i386's, for GDB.
* i386-tdep.h (i386bsd_sigcontext_addr): Remove prototype. (I386_SIZEOF_GREGS, I386_SIZEOF_FREGS, I386_SIZEOF_XREGS): Remove defenitions. (IS_FP_REGNUM, IS_SSE_REGNUM): Remove definitions. * i386-tdep.c: Mark functions that are 64-bit safe as such. (I386_EAX_REGNUM, I386_EDX_REGNUM, I386_ESP_REGNUM, I386_EBP_REGNUM, I386_EIP_REGNUM, I386_EFLAGS_REGNUM, I386_ST0_REGNUM): New defines. (CODESTREAM_BUFSIZ, codestream_tell, codestream_peek, codestream_get): Remove define. (codestream_next_addr, condestream_addr, condestream_buf, codestream_off, codestream_cnt): Remove variables. (codestream_fill, codestream_seek, codestream_read): Remove functions. (i386_follow_jump): Rewrite to avoid usage of removed codestream functionality. (i386_get_frame_setup, i386_frameless_signal_p, i386_frame_chain, i386_sigtramp_saved_pc, i386_sigtramp_saved_sp, i386_frame_saved_pc, i386_saved_pc_after_call, i386_frame_num_args, i386_frame_init_saved_regs, i386_push_return_address, i386_do_pop_frame, i386_pop_frame, i386_push_arguments): Remove functions. (i386_skip_prologue): Rewrite to avoid usage of removed codestream functionality. Use i386_analyze_prologue instead of i386_get_frame_setup. (I386_NUM_SAVED_REGS): New define. (struct i386_frame_cache): New structure. (i386_alloc_frame_cache, i386_analyze_struct_return, i386_skip_probe, i386_analyze_frame_setup, i386_analyze_register_saves, i386_analyze_prologue, i386_unwind_pc, i386_frame_cache, i386_frame_this_id, i386_frame_prev_register, i386_sigtramp_frame_cache, i386_sigtramp_frame_this_id, i386_sigtramp_frame_prev_register, i386_frame_p, i386_sigtramp_frame_p, i386_frame_base_address, i386_unwind_dummy_id, i386_save_dummy_tos, i386_push_dummy_call): New functions. (i386_frame_unwind, i386_sigtramp_frame_unwind, i386_frame_base): New variables. (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Define in terms of I386_EAX_REGNUM and I386_EDX_REGNUM. (i386_extract_return_value, i386_store_return_value): Use I386_ST0_REGNUM where appropriate. (i386_extract_struct_value_address): Rewrite to use extract_address. (i386_svr4_pc_in_sigtramp): Add comment. (i386_svr4_sigcontext_addr): Rewrite. (i386_svr4_init_abi): Adjust TDEP->sc_pc_offset and TDEP->sc_sp_offset. (i386_gdbarch_init): Don't set deprecated_init_frame_pc. Set sp_regnum, fp_regnum, pc_regnum, ps_regnum and fp0_regnum in terms of new defines. Set push_dummy_call, don't set deprecated_push_arguments, deprecated_push_return_address, deprecated_pop_frame. Don't set parm_boundary. Don't set deprecated_frame_chain, deprecated_frame_saved_pc, deprecated_saved_pc_after_call. Set unwind_dummy_id, save_dummy_frame_tos, unwind_pc. Call frame_unwind_append_predicate and frame_base_set_default. Don't set deprecated_dummy_write_pc. Don't set deprecated_fp_regnum. Don't set frameless_function_invocation. Don't set deprecated_register_bytes, deprecated_register_size, deprecated_call_dummy_words and deprecated_sizeof_call_dummy. * i386-linux-tdep.c: Fix formatting in some comments. (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0, LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1, LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0, LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): Drop redundant parentheses. (I386_LINUX_UCONTEXT_SIGCONTEXT_OFFSET): New define. (i386_linux_sigcontext_addr): Use it. Rewrite. (find_minsym_and_objfile): Change name of second argument. (skip_gnu_resolver): Renamed from skip_hurd_resolver. All callers changed. Use frame_pc_unwind instead of DEPRECATED_SAVED_PC_AFTER_CALL. (i386_linux_init_abi): Don't set deprecated_register_bytes. * i386bsd-tdep.c (i386bsd_sigcontext_addr): Rewrite. * i386-nto-tdep.c (i386nto_sigcontext_addr): Adapt for new frame unwinder. * i386-cygwin-tdep.c: Don't include "gdbcore.h", "frame.h" and "dummy-frame.h". (i386_cygwin_frame_chain_valid, i386_cygwin_frame_chain): Removed. (_initialize_i386_cygwin_tdep): New prototype. (i386_cygwin_init_abi): Don't set deprecated_frame_chain and deprecated_frame_chain_valid. * i386-sol2-tdep.c (i386_sol2_init_abi): Don't set TDEP->sigcontext_addr, TDEP->sc_pc_offset and TDEP->sc_sp_offset. Rely on the SVR4 defaults. * config/i386/i386sol2.mt (TDEPFILES): Remove i386bsd-tdep.o. * Makefile.in (i386-tdep.o, i386-cygwin-tdep.o): Update dependencies.
2003-05-30 21:24:30 +02:00
Copyright (C) 2003, 2007-2012 Free Software Foundation, Inc.
* i386-tdep.h (i386bsd_sigcontext_addr): Remove prototype. (I386_SIZEOF_GREGS, I386_SIZEOF_FREGS, I386_SIZEOF_XREGS): Remove defenitions. (IS_FP_REGNUM, IS_SSE_REGNUM): Remove definitions. * i386-tdep.c: Mark functions that are 64-bit safe as such. (I386_EAX_REGNUM, I386_EDX_REGNUM, I386_ESP_REGNUM, I386_EBP_REGNUM, I386_EIP_REGNUM, I386_EFLAGS_REGNUM, I386_ST0_REGNUM): New defines. (CODESTREAM_BUFSIZ, codestream_tell, codestream_peek, codestream_get): Remove define. (codestream_next_addr, condestream_addr, condestream_buf, codestream_off, codestream_cnt): Remove variables. (codestream_fill, codestream_seek, codestream_read): Remove functions. (i386_follow_jump): Rewrite to avoid usage of removed codestream functionality. (i386_get_frame_setup, i386_frameless_signal_p, i386_frame_chain, i386_sigtramp_saved_pc, i386_sigtramp_saved_sp, i386_frame_saved_pc, i386_saved_pc_after_call, i386_frame_num_args, i386_frame_init_saved_regs, i386_push_return_address, i386_do_pop_frame, i386_pop_frame, i386_push_arguments): Remove functions. (i386_skip_prologue): Rewrite to avoid usage of removed codestream functionality. Use i386_analyze_prologue instead of i386_get_frame_setup. (I386_NUM_SAVED_REGS): New define. (struct i386_frame_cache): New structure. (i386_alloc_frame_cache, i386_analyze_struct_return, i386_skip_probe, i386_analyze_frame_setup, i386_analyze_register_saves, i386_analyze_prologue, i386_unwind_pc, i386_frame_cache, i386_frame_this_id, i386_frame_prev_register, i386_sigtramp_frame_cache, i386_sigtramp_frame_this_id, i386_sigtramp_frame_prev_register, i386_frame_p, i386_sigtramp_frame_p, i386_frame_base_address, i386_unwind_dummy_id, i386_save_dummy_tos, i386_push_dummy_call): New functions. (i386_frame_unwind, i386_sigtramp_frame_unwind, i386_frame_base): New variables. (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Define in terms of I386_EAX_REGNUM and I386_EDX_REGNUM. (i386_extract_return_value, i386_store_return_value): Use I386_ST0_REGNUM where appropriate. (i386_extract_struct_value_address): Rewrite to use extract_address. (i386_svr4_pc_in_sigtramp): Add comment. (i386_svr4_sigcontext_addr): Rewrite. (i386_svr4_init_abi): Adjust TDEP->sc_pc_offset and TDEP->sc_sp_offset. (i386_gdbarch_init): Don't set deprecated_init_frame_pc. Set sp_regnum, fp_regnum, pc_regnum, ps_regnum and fp0_regnum in terms of new defines. Set push_dummy_call, don't set deprecated_push_arguments, deprecated_push_return_address, deprecated_pop_frame. Don't set parm_boundary. Don't set deprecated_frame_chain, deprecated_frame_saved_pc, deprecated_saved_pc_after_call. Set unwind_dummy_id, save_dummy_frame_tos, unwind_pc. Call frame_unwind_append_predicate and frame_base_set_default. Don't set deprecated_dummy_write_pc. Don't set deprecated_fp_regnum. Don't set frameless_function_invocation. Don't set deprecated_register_bytes, deprecated_register_size, deprecated_call_dummy_words and deprecated_sizeof_call_dummy. * i386-linux-tdep.c: Fix formatting in some comments. (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0, LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1, LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0, LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): Drop redundant parentheses. (I386_LINUX_UCONTEXT_SIGCONTEXT_OFFSET): New define. (i386_linux_sigcontext_addr): Use it. Rewrite. (find_minsym_and_objfile): Change name of second argument. (skip_gnu_resolver): Renamed from skip_hurd_resolver. All callers changed. Use frame_pc_unwind instead of DEPRECATED_SAVED_PC_AFTER_CALL. (i386_linux_init_abi): Don't set deprecated_register_bytes. * i386bsd-tdep.c (i386bsd_sigcontext_addr): Rewrite. * i386-nto-tdep.c (i386nto_sigcontext_addr): Adapt for new frame unwinder. * i386-cygwin-tdep.c: Don't include "gdbcore.h", "frame.h" and "dummy-frame.h". (i386_cygwin_frame_chain_valid, i386_cygwin_frame_chain): Removed. (_initialize_i386_cygwin_tdep): New prototype. (i386_cygwin_init_abi): Don't set deprecated_frame_chain and deprecated_frame_chain_valid. * i386-sol2-tdep.c (i386_sol2_init_abi): Don't set TDEP->sigcontext_addr, TDEP->sc_pc_offset and TDEP->sc_sp_offset. Rely on the SVR4 defaults. * config/i386/i386sol2.mt (TDEPFILES): Remove i386bsd-tdep.o. * Makefile.in (i386-tdep.o, i386-cygwin-tdep.o): Update dependencies.
2003-05-30 21:24:30 +02:00
This file is part of GDB.
* i386-tdep.h (i386bsd_sigcontext_addr): Remove prototype. (I386_SIZEOF_GREGS, I386_SIZEOF_FREGS, I386_SIZEOF_XREGS): Remove defenitions. (IS_FP_REGNUM, IS_SSE_REGNUM): Remove definitions. * i386-tdep.c: Mark functions that are 64-bit safe as such. (I386_EAX_REGNUM, I386_EDX_REGNUM, I386_ESP_REGNUM, I386_EBP_REGNUM, I386_EIP_REGNUM, I386_EFLAGS_REGNUM, I386_ST0_REGNUM): New defines. (CODESTREAM_BUFSIZ, codestream_tell, codestream_peek, codestream_get): Remove define. (codestream_next_addr, condestream_addr, condestream_buf, codestream_off, codestream_cnt): Remove variables. (codestream_fill, codestream_seek, codestream_read): Remove functions. (i386_follow_jump): Rewrite to avoid usage of removed codestream functionality. (i386_get_frame_setup, i386_frameless_signal_p, i386_frame_chain, i386_sigtramp_saved_pc, i386_sigtramp_saved_sp, i386_frame_saved_pc, i386_saved_pc_after_call, i386_frame_num_args, i386_frame_init_saved_regs, i386_push_return_address, i386_do_pop_frame, i386_pop_frame, i386_push_arguments): Remove functions. (i386_skip_prologue): Rewrite to avoid usage of removed codestream functionality. Use i386_analyze_prologue instead of i386_get_frame_setup. (I386_NUM_SAVED_REGS): New define. (struct i386_frame_cache): New structure. (i386_alloc_frame_cache, i386_analyze_struct_return, i386_skip_probe, i386_analyze_frame_setup, i386_analyze_register_saves, i386_analyze_prologue, i386_unwind_pc, i386_frame_cache, i386_frame_this_id, i386_frame_prev_register, i386_sigtramp_frame_cache, i386_sigtramp_frame_this_id, i386_sigtramp_frame_prev_register, i386_frame_p, i386_sigtramp_frame_p, i386_frame_base_address, i386_unwind_dummy_id, i386_save_dummy_tos, i386_push_dummy_call): New functions. (i386_frame_unwind, i386_sigtramp_frame_unwind, i386_frame_base): New variables. (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Define in terms of I386_EAX_REGNUM and I386_EDX_REGNUM. (i386_extract_return_value, i386_store_return_value): Use I386_ST0_REGNUM where appropriate. (i386_extract_struct_value_address): Rewrite to use extract_address. (i386_svr4_pc_in_sigtramp): Add comment. (i386_svr4_sigcontext_addr): Rewrite. (i386_svr4_init_abi): Adjust TDEP->sc_pc_offset and TDEP->sc_sp_offset. (i386_gdbarch_init): Don't set deprecated_init_frame_pc. Set sp_regnum, fp_regnum, pc_regnum, ps_regnum and fp0_regnum in terms of new defines. Set push_dummy_call, don't set deprecated_push_arguments, deprecated_push_return_address, deprecated_pop_frame. Don't set parm_boundary. Don't set deprecated_frame_chain, deprecated_frame_saved_pc, deprecated_saved_pc_after_call. Set unwind_dummy_id, save_dummy_frame_tos, unwind_pc. Call frame_unwind_append_predicate and frame_base_set_default. Don't set deprecated_dummy_write_pc. Don't set deprecated_fp_regnum. Don't set frameless_function_invocation. Don't set deprecated_register_bytes, deprecated_register_size, deprecated_call_dummy_words and deprecated_sizeof_call_dummy. * i386-linux-tdep.c: Fix formatting in some comments. (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0, LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1, LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0, LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): Drop redundant parentheses. (I386_LINUX_UCONTEXT_SIGCONTEXT_OFFSET): New define. (i386_linux_sigcontext_addr): Use it. Rewrite. (find_minsym_and_objfile): Change name of second argument. (skip_gnu_resolver): Renamed from skip_hurd_resolver. All callers changed. Use frame_pc_unwind instead of DEPRECATED_SAVED_PC_AFTER_CALL. (i386_linux_init_abi): Don't set deprecated_register_bytes. * i386bsd-tdep.c (i386bsd_sigcontext_addr): Rewrite. * i386-nto-tdep.c (i386nto_sigcontext_addr): Adapt for new frame unwinder. * i386-cygwin-tdep.c: Don't include "gdbcore.h", "frame.h" and "dummy-frame.h". (i386_cygwin_frame_chain_valid, i386_cygwin_frame_chain): Removed. (_initialize_i386_cygwin_tdep): New prototype. (i386_cygwin_init_abi): Don't set deprecated_frame_chain and deprecated_frame_chain_valid. * i386-sol2-tdep.c (i386_sol2_init_abi): Don't set TDEP->sigcontext_addr, TDEP->sc_pc_offset and TDEP->sc_sp_offset. Rely on the SVR4 defaults. * config/i386/i386sol2.mt (TDEPFILES): Remove i386bsd-tdep.o. * Makefile.in (i386-tdep.o, i386-cygwin-tdep.o): Update dependencies.
2003-05-30 21:24:30 +02:00
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
* i386-tdep.h (i386bsd_sigcontext_addr): Remove prototype. (I386_SIZEOF_GREGS, I386_SIZEOF_FREGS, I386_SIZEOF_XREGS): Remove defenitions. (IS_FP_REGNUM, IS_SSE_REGNUM): Remove definitions. * i386-tdep.c: Mark functions that are 64-bit safe as such. (I386_EAX_REGNUM, I386_EDX_REGNUM, I386_ESP_REGNUM, I386_EBP_REGNUM, I386_EIP_REGNUM, I386_EFLAGS_REGNUM, I386_ST0_REGNUM): New defines. (CODESTREAM_BUFSIZ, codestream_tell, codestream_peek, codestream_get): Remove define. (codestream_next_addr, condestream_addr, condestream_buf, codestream_off, codestream_cnt): Remove variables. (codestream_fill, codestream_seek, codestream_read): Remove functions. (i386_follow_jump): Rewrite to avoid usage of removed codestream functionality. (i386_get_frame_setup, i386_frameless_signal_p, i386_frame_chain, i386_sigtramp_saved_pc, i386_sigtramp_saved_sp, i386_frame_saved_pc, i386_saved_pc_after_call, i386_frame_num_args, i386_frame_init_saved_regs, i386_push_return_address, i386_do_pop_frame, i386_pop_frame, i386_push_arguments): Remove functions. (i386_skip_prologue): Rewrite to avoid usage of removed codestream functionality. Use i386_analyze_prologue instead of i386_get_frame_setup. (I386_NUM_SAVED_REGS): New define. (struct i386_frame_cache): New structure. (i386_alloc_frame_cache, i386_analyze_struct_return, i386_skip_probe, i386_analyze_frame_setup, i386_analyze_register_saves, i386_analyze_prologue, i386_unwind_pc, i386_frame_cache, i386_frame_this_id, i386_frame_prev_register, i386_sigtramp_frame_cache, i386_sigtramp_frame_this_id, i386_sigtramp_frame_prev_register, i386_frame_p, i386_sigtramp_frame_p, i386_frame_base_address, i386_unwind_dummy_id, i386_save_dummy_tos, i386_push_dummy_call): New functions. (i386_frame_unwind, i386_sigtramp_frame_unwind, i386_frame_base): New variables. (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Define in terms of I386_EAX_REGNUM and I386_EDX_REGNUM. (i386_extract_return_value, i386_store_return_value): Use I386_ST0_REGNUM where appropriate. (i386_extract_struct_value_address): Rewrite to use extract_address. (i386_svr4_pc_in_sigtramp): Add comment. (i386_svr4_sigcontext_addr): Rewrite. (i386_svr4_init_abi): Adjust TDEP->sc_pc_offset and TDEP->sc_sp_offset. (i386_gdbarch_init): Don't set deprecated_init_frame_pc. Set sp_regnum, fp_regnum, pc_regnum, ps_regnum and fp0_regnum in terms of new defines. Set push_dummy_call, don't set deprecated_push_arguments, deprecated_push_return_address, deprecated_pop_frame. Don't set parm_boundary. Don't set deprecated_frame_chain, deprecated_frame_saved_pc, deprecated_saved_pc_after_call. Set unwind_dummy_id, save_dummy_frame_tos, unwind_pc. Call frame_unwind_append_predicate and frame_base_set_default. Don't set deprecated_dummy_write_pc. Don't set deprecated_fp_regnum. Don't set frameless_function_invocation. Don't set deprecated_register_bytes, deprecated_register_size, deprecated_call_dummy_words and deprecated_sizeof_call_dummy. * i386-linux-tdep.c: Fix formatting in some comments. (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0, LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1, LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0, LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): Drop redundant parentheses. (I386_LINUX_UCONTEXT_SIGCONTEXT_OFFSET): New define. (i386_linux_sigcontext_addr): Use it. Rewrite. (find_minsym_and_objfile): Change name of second argument. (skip_gnu_resolver): Renamed from skip_hurd_resolver. All callers changed. Use frame_pc_unwind instead of DEPRECATED_SAVED_PC_AFTER_CALL. (i386_linux_init_abi): Don't set deprecated_register_bytes. * i386bsd-tdep.c (i386bsd_sigcontext_addr): Rewrite. * i386-nto-tdep.c (i386nto_sigcontext_addr): Adapt for new frame unwinder. * i386-cygwin-tdep.c: Don't include "gdbcore.h", "frame.h" and "dummy-frame.h". (i386_cygwin_frame_chain_valid, i386_cygwin_frame_chain): Removed. (_initialize_i386_cygwin_tdep): New prototype. (i386_cygwin_init_abi): Don't set deprecated_frame_chain and deprecated_frame_chain_valid. * i386-sol2-tdep.c (i386_sol2_init_abi): Don't set TDEP->sigcontext_addr, TDEP->sc_pc_offset and TDEP->sc_sp_offset. Rely on the SVR4 defaults. * config/i386/i386sol2.mt (TDEPFILES): Remove i386bsd-tdep.o. * Makefile.in (i386-tdep.o, i386-cygwin-tdep.o): Update dependencies.
2003-05-30 21:24:30 +02:00
(at your option) any later version.
* i386-tdep.h (i386bsd_sigcontext_addr): Remove prototype. (I386_SIZEOF_GREGS, I386_SIZEOF_FREGS, I386_SIZEOF_XREGS): Remove defenitions. (IS_FP_REGNUM, IS_SSE_REGNUM): Remove definitions. * i386-tdep.c: Mark functions that are 64-bit safe as such. (I386_EAX_REGNUM, I386_EDX_REGNUM, I386_ESP_REGNUM, I386_EBP_REGNUM, I386_EIP_REGNUM, I386_EFLAGS_REGNUM, I386_ST0_REGNUM): New defines. (CODESTREAM_BUFSIZ, codestream_tell, codestream_peek, codestream_get): Remove define. (codestream_next_addr, condestream_addr, condestream_buf, codestream_off, codestream_cnt): Remove variables. (codestream_fill, codestream_seek, codestream_read): Remove functions. (i386_follow_jump): Rewrite to avoid usage of removed codestream functionality. (i386_get_frame_setup, i386_frameless_signal_p, i386_frame_chain, i386_sigtramp_saved_pc, i386_sigtramp_saved_sp, i386_frame_saved_pc, i386_saved_pc_after_call, i386_frame_num_args, i386_frame_init_saved_regs, i386_push_return_address, i386_do_pop_frame, i386_pop_frame, i386_push_arguments): Remove functions. (i386_skip_prologue): Rewrite to avoid usage of removed codestream functionality. Use i386_analyze_prologue instead of i386_get_frame_setup. (I386_NUM_SAVED_REGS): New define. (struct i386_frame_cache): New structure. (i386_alloc_frame_cache, i386_analyze_struct_return, i386_skip_probe, i386_analyze_frame_setup, i386_analyze_register_saves, i386_analyze_prologue, i386_unwind_pc, i386_frame_cache, i386_frame_this_id, i386_frame_prev_register, i386_sigtramp_frame_cache, i386_sigtramp_frame_this_id, i386_sigtramp_frame_prev_register, i386_frame_p, i386_sigtramp_frame_p, i386_frame_base_address, i386_unwind_dummy_id, i386_save_dummy_tos, i386_push_dummy_call): New functions. (i386_frame_unwind, i386_sigtramp_frame_unwind, i386_frame_base): New variables. (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Define in terms of I386_EAX_REGNUM and I386_EDX_REGNUM. (i386_extract_return_value, i386_store_return_value): Use I386_ST0_REGNUM where appropriate. (i386_extract_struct_value_address): Rewrite to use extract_address. (i386_svr4_pc_in_sigtramp): Add comment. (i386_svr4_sigcontext_addr): Rewrite. (i386_svr4_init_abi): Adjust TDEP->sc_pc_offset and TDEP->sc_sp_offset. (i386_gdbarch_init): Don't set deprecated_init_frame_pc. Set sp_regnum, fp_regnum, pc_regnum, ps_regnum and fp0_regnum in terms of new defines. Set push_dummy_call, don't set deprecated_push_arguments, deprecated_push_return_address, deprecated_pop_frame. Don't set parm_boundary. Don't set deprecated_frame_chain, deprecated_frame_saved_pc, deprecated_saved_pc_after_call. Set unwind_dummy_id, save_dummy_frame_tos, unwind_pc. Call frame_unwind_append_predicate and frame_base_set_default. Don't set deprecated_dummy_write_pc. Don't set deprecated_fp_regnum. Don't set frameless_function_invocation. Don't set deprecated_register_bytes, deprecated_register_size, deprecated_call_dummy_words and deprecated_sizeof_call_dummy. * i386-linux-tdep.c: Fix formatting in some comments. (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0, LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1, LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0, LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): Drop redundant parentheses. (I386_LINUX_UCONTEXT_SIGCONTEXT_OFFSET): New define. (i386_linux_sigcontext_addr): Use it. Rewrite. (find_minsym_and_objfile): Change name of second argument. (skip_gnu_resolver): Renamed from skip_hurd_resolver. All callers changed. Use frame_pc_unwind instead of DEPRECATED_SAVED_PC_AFTER_CALL. (i386_linux_init_abi): Don't set deprecated_register_bytes. * i386bsd-tdep.c (i386bsd_sigcontext_addr): Rewrite. * i386-nto-tdep.c (i386nto_sigcontext_addr): Adapt for new frame unwinder. * i386-cygwin-tdep.c: Don't include "gdbcore.h", "frame.h" and "dummy-frame.h". (i386_cygwin_frame_chain_valid, i386_cygwin_frame_chain): Removed. (_initialize_i386_cygwin_tdep): New prototype. (i386_cygwin_init_abi): Don't set deprecated_frame_chain and deprecated_frame_chain_valid. * i386-sol2-tdep.c (i386_sol2_init_abi): Don't set TDEP->sigcontext_addr, TDEP->sc_pc_offset and TDEP->sc_sp_offset. Rely on the SVR4 defaults. * config/i386/i386sol2.mt (TDEPFILES): Remove i386bsd-tdep.o. * Makefile.in (i386-tdep.o, i386-cygwin-tdep.o): Update dependencies.
2003-05-30 21:24:30 +02:00
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
* i386-tdep.h (i386bsd_sigcontext_addr): Remove prototype. (I386_SIZEOF_GREGS, I386_SIZEOF_FREGS, I386_SIZEOF_XREGS): Remove defenitions. (IS_FP_REGNUM, IS_SSE_REGNUM): Remove definitions. * i386-tdep.c: Mark functions that are 64-bit safe as such. (I386_EAX_REGNUM, I386_EDX_REGNUM, I386_ESP_REGNUM, I386_EBP_REGNUM, I386_EIP_REGNUM, I386_EFLAGS_REGNUM, I386_ST0_REGNUM): New defines. (CODESTREAM_BUFSIZ, codestream_tell, codestream_peek, codestream_get): Remove define. (codestream_next_addr, condestream_addr, condestream_buf, codestream_off, codestream_cnt): Remove variables. (codestream_fill, codestream_seek, codestream_read): Remove functions. (i386_follow_jump): Rewrite to avoid usage of removed codestream functionality. (i386_get_frame_setup, i386_frameless_signal_p, i386_frame_chain, i386_sigtramp_saved_pc, i386_sigtramp_saved_sp, i386_frame_saved_pc, i386_saved_pc_after_call, i386_frame_num_args, i386_frame_init_saved_regs, i386_push_return_address, i386_do_pop_frame, i386_pop_frame, i386_push_arguments): Remove functions. (i386_skip_prologue): Rewrite to avoid usage of removed codestream functionality. Use i386_analyze_prologue instead of i386_get_frame_setup. (I386_NUM_SAVED_REGS): New define. (struct i386_frame_cache): New structure. (i386_alloc_frame_cache, i386_analyze_struct_return, i386_skip_probe, i386_analyze_frame_setup, i386_analyze_register_saves, i386_analyze_prologue, i386_unwind_pc, i386_frame_cache, i386_frame_this_id, i386_frame_prev_register, i386_sigtramp_frame_cache, i386_sigtramp_frame_this_id, i386_sigtramp_frame_prev_register, i386_frame_p, i386_sigtramp_frame_p, i386_frame_base_address, i386_unwind_dummy_id, i386_save_dummy_tos, i386_push_dummy_call): New functions. (i386_frame_unwind, i386_sigtramp_frame_unwind, i386_frame_base): New variables. (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Define in terms of I386_EAX_REGNUM and I386_EDX_REGNUM. (i386_extract_return_value, i386_store_return_value): Use I386_ST0_REGNUM where appropriate. (i386_extract_struct_value_address): Rewrite to use extract_address. (i386_svr4_pc_in_sigtramp): Add comment. (i386_svr4_sigcontext_addr): Rewrite. (i386_svr4_init_abi): Adjust TDEP->sc_pc_offset and TDEP->sc_sp_offset. (i386_gdbarch_init): Don't set deprecated_init_frame_pc. Set sp_regnum, fp_regnum, pc_regnum, ps_regnum and fp0_regnum in terms of new defines. Set push_dummy_call, don't set deprecated_push_arguments, deprecated_push_return_address, deprecated_pop_frame. Don't set parm_boundary. Don't set deprecated_frame_chain, deprecated_frame_saved_pc, deprecated_saved_pc_after_call. Set unwind_dummy_id, save_dummy_frame_tos, unwind_pc. Call frame_unwind_append_predicate and frame_base_set_default. Don't set deprecated_dummy_write_pc. Don't set deprecated_fp_regnum. Don't set frameless_function_invocation. Don't set deprecated_register_bytes, deprecated_register_size, deprecated_call_dummy_words and deprecated_sizeof_call_dummy. * i386-linux-tdep.c: Fix formatting in some comments. (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0, LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1, LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0, LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): Drop redundant parentheses. (I386_LINUX_UCONTEXT_SIGCONTEXT_OFFSET): New define. (i386_linux_sigcontext_addr): Use it. Rewrite. (find_minsym_and_objfile): Change name of second argument. (skip_gnu_resolver): Renamed from skip_hurd_resolver. All callers changed. Use frame_pc_unwind instead of DEPRECATED_SAVED_PC_AFTER_CALL. (i386_linux_init_abi): Don't set deprecated_register_bytes. * i386bsd-tdep.c (i386bsd_sigcontext_addr): Rewrite. * i386-nto-tdep.c (i386nto_sigcontext_addr): Adapt for new frame unwinder. * i386-cygwin-tdep.c: Don't include "gdbcore.h", "frame.h" and "dummy-frame.h". (i386_cygwin_frame_chain_valid, i386_cygwin_frame_chain): Removed. (_initialize_i386_cygwin_tdep): New prototype. (i386_cygwin_init_abi): Don't set deprecated_frame_chain and deprecated_frame_chain_valid. * i386-sol2-tdep.c (i386_sol2_init_abi): Don't set TDEP->sigcontext_addr, TDEP->sc_pc_offset and TDEP->sc_sp_offset. Rely on the SVR4 defaults. * config/i386/i386sol2.mt (TDEPFILES): Remove i386bsd-tdep.o. * Makefile.in (i386-tdep.o, i386-cygwin-tdep.o): Update dependencies.
2003-05-30 21:24:30 +02:00
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "osabi.h"
* i386-tdep.h (i386bsd_sigcontext_addr): Remove prototype. (I386_SIZEOF_GREGS, I386_SIZEOF_FREGS, I386_SIZEOF_XREGS): Remove defenitions. (IS_FP_REGNUM, IS_SSE_REGNUM): Remove definitions. * i386-tdep.c: Mark functions that are 64-bit safe as such. (I386_EAX_REGNUM, I386_EDX_REGNUM, I386_ESP_REGNUM, I386_EBP_REGNUM, I386_EIP_REGNUM, I386_EFLAGS_REGNUM, I386_ST0_REGNUM): New defines. (CODESTREAM_BUFSIZ, codestream_tell, codestream_peek, codestream_get): Remove define. (codestream_next_addr, condestream_addr, condestream_buf, codestream_off, codestream_cnt): Remove variables. (codestream_fill, codestream_seek, codestream_read): Remove functions. (i386_follow_jump): Rewrite to avoid usage of removed codestream functionality. (i386_get_frame_setup, i386_frameless_signal_p, i386_frame_chain, i386_sigtramp_saved_pc, i386_sigtramp_saved_sp, i386_frame_saved_pc, i386_saved_pc_after_call, i386_frame_num_args, i386_frame_init_saved_regs, i386_push_return_address, i386_do_pop_frame, i386_pop_frame, i386_push_arguments): Remove functions. (i386_skip_prologue): Rewrite to avoid usage of removed codestream functionality. Use i386_analyze_prologue instead of i386_get_frame_setup. (I386_NUM_SAVED_REGS): New define. (struct i386_frame_cache): New structure. (i386_alloc_frame_cache, i386_analyze_struct_return, i386_skip_probe, i386_analyze_frame_setup, i386_analyze_register_saves, i386_analyze_prologue, i386_unwind_pc, i386_frame_cache, i386_frame_this_id, i386_frame_prev_register, i386_sigtramp_frame_cache, i386_sigtramp_frame_this_id, i386_sigtramp_frame_prev_register, i386_frame_p, i386_sigtramp_frame_p, i386_frame_base_address, i386_unwind_dummy_id, i386_save_dummy_tos, i386_push_dummy_call): New functions. (i386_frame_unwind, i386_sigtramp_frame_unwind, i386_frame_base): New variables. (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Define in terms of I386_EAX_REGNUM and I386_EDX_REGNUM. (i386_extract_return_value, i386_store_return_value): Use I386_ST0_REGNUM where appropriate. (i386_extract_struct_value_address): Rewrite to use extract_address. (i386_svr4_pc_in_sigtramp): Add comment. (i386_svr4_sigcontext_addr): Rewrite. (i386_svr4_init_abi): Adjust TDEP->sc_pc_offset and TDEP->sc_sp_offset. (i386_gdbarch_init): Don't set deprecated_init_frame_pc. Set sp_regnum, fp_regnum, pc_regnum, ps_regnum and fp0_regnum in terms of new defines. Set push_dummy_call, don't set deprecated_push_arguments, deprecated_push_return_address, deprecated_pop_frame. Don't set parm_boundary. Don't set deprecated_frame_chain, deprecated_frame_saved_pc, deprecated_saved_pc_after_call. Set unwind_dummy_id, save_dummy_frame_tos, unwind_pc. Call frame_unwind_append_predicate and frame_base_set_default. Don't set deprecated_dummy_write_pc. Don't set deprecated_fp_regnum. Don't set frameless_function_invocation. Don't set deprecated_register_bytes, deprecated_register_size, deprecated_call_dummy_words and deprecated_sizeof_call_dummy. * i386-linux-tdep.c: Fix formatting in some comments. (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0, LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1, LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0, LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): Drop redundant parentheses. (I386_LINUX_UCONTEXT_SIGCONTEXT_OFFSET): New define. (i386_linux_sigcontext_addr): Use it. Rewrite. (find_minsym_and_objfile): Change name of second argument. (skip_gnu_resolver): Renamed from skip_hurd_resolver. All callers changed. Use frame_pc_unwind instead of DEPRECATED_SAVED_PC_AFTER_CALL. (i386_linux_init_abi): Don't set deprecated_register_bytes. * i386bsd-tdep.c (i386bsd_sigcontext_addr): Rewrite. * i386-nto-tdep.c (i386nto_sigcontext_addr): Adapt for new frame unwinder. * i386-cygwin-tdep.c: Don't include "gdbcore.h", "frame.h" and "dummy-frame.h". (i386_cygwin_frame_chain_valid, i386_cygwin_frame_chain): Removed. (_initialize_i386_cygwin_tdep): New prototype. (i386_cygwin_init_abi): Don't set deprecated_frame_chain and deprecated_frame_chain_valid. * i386-sol2-tdep.c (i386_sol2_init_abi): Don't set TDEP->sigcontext_addr, TDEP->sc_pc_offset and TDEP->sc_sp_offset. Rely on the SVR4 defaults. * config/i386/i386sol2.mt (TDEPFILES): Remove i386bsd-tdep.o. * Makefile.in (i386-tdep.o, i386-cygwin-tdep.o): Update dependencies.
2003-05-30 21:24:30 +02:00
#include "gdb_string.h"
#include "i386-tdep.h"
#include "windows-tdep.h"
#include "regset.h"
#include "gdb_obstack.h"
#include "xml-support.h"
#include "gdbcore.h"
#include "solib.h"
#include "solib-target.h"
* corelow.c (core_pid_to_str): Default to using normal_pid_to_str instead of printing "Thread" here. * linux-tdep.c: Include inferior.h. (linux_core_pid_to_str): New. (linux_init_abi): New. * linux-tdep.h (linux_init_abi): Declare. * alpha-linux-tdep.c: Include linux-tdep.h. (alpha_linux_init_abi): Call linux_init_abi. * amd64-linux-tdep.c (amd64_linux_init_abi): Call linux_init_abi. * arm-linux-tdep.c (arm_linux_init_abi): Call linux_init_abi. * frv-linux-tdep.c: Include linux-tdep.h (frv_linux_init_abi): Call linux_init_abi. * hppa-linux-tdep.c: Include linux-tdep.h (hppa_linux_init_abi): Call linux_init_abi. * i386-linux-tdep.c (i386_linux_init_abi): Call linux_init_abi. * ia64-linux-tdep.c: Include linux-tdep.h. (ia64_linux_init_abi): Call linux_init_abi. * m32r-linux-tdep.c: Include linux-tdep.h. (m32r_linux_init_abi): Call linux_init_abi. * m68klinux-tdep.c: Include linux-tdep.h. (m68k_linux_init_abi): Call linux_init_abi. * microblaze-linux-tdep.c: Include linux-tdep.h. (microblaze_linux_init_abi): Call linux_init_abi. * mips-linux-tdep.c: Include linux-tdep.h. (mips_linux_init_abi): Call linux_init_abi. * mn10300-linux-tdep.c: Include linux-tdep.h. (am33_linux_init_osabi): Call linux_init_abi. Rename the 'gdbinfo' parameter to 'info'. * ppc-linux-tdep.c: Include linux-tdep.h. (ppc_linux_init_abi): Call linux_init_abi. * sh-linux-tdep.c: Include linux-tdep.h. (sh_linux_init_abi): Call linux_init_abi. * sparc-linux-tdep.c: Include linux-tdep.h. (sparc32_linux_init_abi): Call linux_init_abi. * sparc64-linux-tdep.c: Include linux-tdep.h. (sparc64_linux_init_abi): Call linux_init_abi. * xtensa-linux-tdep.c: Include linux-tdep.h. (xtensa_linux_init_abi): Call linux_init_abi. * i386-cygwin-tdep.c (i386_windows_core_pid_to_str): New. (i386_cygwin_init_abi): Install it as gdbarch_core_pid_to_str callback.
2010-08-04 17:27:57 +02:00
#include "inferior.h"
/* Core file support. */
/* This vector maps GDB's idea of a register's number into an address
in the windows exception context vector. */
static int i386_windows_gregset_reg_offset[] =
{
176, /* eax */
172, /* ecx */
168, /* edx */
164, /* ebx */
196, /* esp */
180, /* ebp */
160, /* esi */
156, /* edi */
184, /* eip */
192, /* eflags */
188, /* cs */
200, /* ss */
152, /* ds */
148, /* es */
144, /* fs */
140, /* gs */
56, /* FloatSave.RegisterArea[0 * 10] */
66, /* FloatSave.RegisterArea[1 * 10] */
76, /* FloatSave.RegisterArea[2 * 10] */
86, /* FloatSave.RegisterArea[3 * 10] */
96, /* FloatSave.RegisterArea[4 * 10] */
106, /* FloatSave.RegisterArea[5 * 10] */
116, /* FloatSave.RegisterArea[6 * 10] */
126, /* FloatSave.RegisterArea[7 * 10] */
28, /* FloatSave.ControlWord */
32, /* FloatSave.StatusWord */
36, /* FloatSave.TagWord */
44, /* FloatSave.ErrorSelector */
40, /* FloatSave.ErrorOffset */
52, /* FloatSave.DataSelector */
48, /* FloatSave.DataOffset */
44, /* FloatSave.ErrorSelector */
/* XMM0-7 */
364, /* ExtendedRegisters[10*16] */
380, /* ExtendedRegisters[11*16] */
396, /* ExtendedRegisters[12*16] */
412, /* ExtendedRegisters[13*16] */
428, /* ExtendedRegisters[14*16] */
444, /* ExtendedRegisters[15*16] */
460, /* ExtendedRegisters[16*16] */
476, /* ExtendedRegisters[17*16] */
/* MXCSR */
228 /* ExtendedRegisters[24] */
};
#define I386_WINDOWS_SIZEOF_GREGSET 716
/* Return the appropriate register set for the core section identified
by SECT_NAME and SECT_SIZE. */
static const struct regset *
i386_windows_regset_from_core_section (struct gdbarch *gdbarch,
const char *sect_name, size_t sect_size)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
if (strcmp (sect_name, ".reg") == 0
&& sect_size == I386_WINDOWS_SIZEOF_GREGSET)
{
if (tdep->gregset == NULL)
tdep->gregset = regset_alloc (gdbarch, i386_supply_gregset,
i386_collect_gregset);
return tdep->gregset;
}
return NULL;
}
struct cpms_data
{
* defs.h (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter. * utils.c (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter, use it instead of current_gdbarch. * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter. * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter, use it instead of current_gdbarch. Update calls to ui_out_field_core_addr to pass architecture: * ada-lang.c (print_one_exception): Update. * breakpoint.c (print_one_breakpoint_location, print_one_exception_catchpoint): Update. * disasm.c (dump_insns): Update. * darwin-nat-info.c (darwin_debug_regions_recurse): Update. * mi/mi-main.c (mi_cmd_data_read_memory): Update. * mi/mi-symbol-cmds.c: Include "objfiles.h". (mi_cmd_symbol_list_lines): Update. * stack.c (print_frame_info, print_frame): Update. Update callers of paddress to pass architecture: * ada-tasks.c (info_task): Update. * ada-valprint.c (ada_val_print_1): Update. * annotate.c (annotate_source, annotate_frame_begin): Update. * breakpoint.c (insert_bp_location, describe_other_breakpoints, mention): Update. * cli/cli-cmds.c (edit_command, list_command, print_disassembly): Update. * corefile.c (memory_error): Update. * c-valprint.c (print_function_pointer_address, c_val_print): Update. * disasm.c (dis_asm_print_address): Update. * exec.c (print_section_info): Update. * f-valprint.c (f_val_print): Update. * infcmd.c: Include "arch-utils.h". (jump_command, program_info): Update. * linux-fork.c: Include "arch-utils.h". (info_forks_command): Update. * m2-valprint.c (print_function_pointer_address, print_unpacked_pointer, print_variable_at_address, m2_val_print): Update. * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command): Update. * printcmd.c (print_address, print_address_demangle, address_info): Update. * p-valprint.c (pascal_val_print): Update. * source.c: Include "arch-utils.h". (line_info): Update. * stack.c (frame_info, print_block_frame_labels): Update. * symfile.c (add_symbol_file_command, list_overlays_command): Update. * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol, print_partial_symbols, maintenance_info_psymtabs, maintenance_check_symtabs): Update. * symtab.c (find_pc_sect_symtab): Update. * target.c (deprecated_debug_xfer_memory): Update. * tracepoint.c (scope_info): Update. * tui/tui-stack.c (tui_make_status_line): Update. * valprint.c (val_print_string): Update. Update callers of paddr_nz to use paddress instead (keeping user-visible output identical): * alpha-tdep.c (alpha_heuristic_proc_start): Update. * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn, amd64_displaced_step_fixup): Update. * arch-utils.c (simple_displaced_step_copy_insn): Update. * auxv.c (fprint_target_auxv): Update. * breakpoint.c (insert_single_step_breakpoint): Update. * buildsym.c (finish_block): Update. * cli/cli-dump.c (restore_section_callback): Update. * fbsd-nat.c (fbsd_find_memory_regions): Update. * frame.c (frame_unwind_register_value): Update. * gcore.c (gcore_create_callback): Update. * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm, i386_record_lea_modrm_addr, i386_record_lea_modrm, i386_process_record): Update. * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id, ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id, ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update. * infrun.c (displaced_step_prepare, displaced_step_fixup, handle_inferior_event, insert_step_resume_breakpoint_at_sal, insert_longjmp_resume_breakpoint): Update. * linux-nat.c (linux_nat_find_memory_regions): Update. * linux-record.c (record_linux_system_call): Update. * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call): Update. * monitor.c (monitor_error, monitor_remove_breakpoint): Update. * record.c (record_arch_list_add_mem, record_wait, record_xfer_partial): Update. * remote-mips.c (mips_fetch_word, mips_check_lsi_error, mips_common_breakpoint): Update. * remote-sim.c (gdbsim_xfer_inferior_memory): Update. * rs6000-tdep.c (ppc_displaced_step_fixup): Update. * solib-som.c (som_current_sos): Update. * symfile.c (load_progress, generic_load): Update. * symfile-mem.c (add_vsyscall_page): Update. * valops.c (value_fetch_lazy): Update. * windows-tdep.c (windows_xfer_shared_library): Update. Update callers of paddr_nz to use paddress instead (changing user-visible output to make it more correct): * dwarf2loc.c (locexpr_describe_location): Update. * ia64-tdep.c (ia64_memory_insert_breakpoint, ia64_memory_remove_breakpoint): Update. * jv-valprint.c (java_value_print): Update. * m32c-tdep.c (m32c_m16c_address_to_pointer): Update. * monitor.c (monitor_read_memory): Update. Update callers of paddr to use paddress instead (changing user-visible output to make it more correct): * arm-tdep.c (arm_push_dummy_call): Update. * breakpoint.c (insert_bp_location, create_thread_event_breakpoint, create_breakpoint): Update. * darwin-nat-info.c (darwin_debug_regions): Update. * dcache.c (dcache_info): Update. * dsrec.c (load_srec, make_srec): Update. * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program, dwarf2_frame_cache): Update. * gcore.c (gcore_copy_callback): Update. * gnu-nat.c (gnu_xfer_memory): Update. * mips-linux-nat.c (mips_show_dr): Update. * monitor.c (monitor_write_memory, monitor_insert_breakpoint, monitor_remove_breakpoint): Update. * remote.c (compare_sections_command): Update. * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint, m32r_remove_breakpoint, m32r_insert_watchpoint, m32r_remove_watchpoint): Update. * sol-thread.c (info_cb): Update. * symfile.c (load_progress): Update. Update callers of paddress or paddr_nz to use hex_string instead (changes output of internal/error/debug messages only): * dwarf2read.c (dump_die_shallow): Update. * frame.c (fprint_field, fprint_frame, frame_pc_unwind, get_frame_func, create_new_frame): Update. * hppa-tdep.c (find_unwind_entry, unwind_command): Update. * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x, ia64_get_dyn_info_list): Update. * maint.c (maintenance_translate_address): Update. * mi/mi-cmd-var.c (mi_cmd_var_create): Update. * target.c (target_flash_erase): Update. Update callers of paddr/paddr_nz to use phex/phex_nz instead, using an appropriate address size. Remove use of strlen_paddr. * exec.c (exec_files_info): Update. * i386-nat.c (i386_show_dr): Update. * remote.c (remote_flash_erase): Update. * m32r-rom.c (m32r_load_section): Update. * monitor.c (monitor_vsprintf, monitor_store_register): Update. * remote.c (remote_check_symbols, remote_search_memory): Update. * remote-mips.c (mips_request, mips_common_breakpoint): Update. * scm-valprint.c (scm_ipruk, scm_scmval_print): Update. * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update. * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs, sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs): Update. * xcoffsolib.c (sharedlibrary_command): Update. * maint.c (maint_print_section_info): Add ADDR_SIZE parameter. Use hex_string_custom instead of paddr. (print_bfd_section_info): Pass address size. (print_objfile_section_info): Likewise. * annotate.h (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * annotate.c (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * source.c (identify_source_line): Update call to annotate_source. * stack.c (print_frame_info, print_frame): Update call to annotate_frame_begin. * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter. (create_breakpoint, create_ada_exception_breakpoint): Update call. * stack.c (print_block_frame_labels): Add GDBARCH parameter. (print_frame_label_vars): Update call. * symmisc.c (print_partial_symbols): Add GDBARCH parameter. (dump_psymtab): Update call to print_partial_symbols. (struct print_symbol_args): Add GDBARCH member. (dump_symtab_1): Set print_symbol_args architecture member. (print_symbol): Use it. * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH parameter. * windows-tdep.c (windows_xfer_shared_library): Likewise. * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member. (core_process_module_section): Pass architecture from cpms_data to windows_xfer_shared_library. (windows_core_xfer_shared_libraries): Initialize cmps_data architecture member. * windows-nat.c (windows_xfer_shared_libraries): Pass architecture to windows_xfer_shared_library. * defs.h (print_address): Add GDBARCH parameter. * printcmd.c (print_address): Add GDBARCH parameter. (print_scalar_formatted, do_examine): Update call. * findcmd.c (find_command): Update call. * tracepoint.c: Include "arch-utils.h". (trace_find_line_command): Update call. * tui/tui-disasm.c (tui_disassemble): Update call. * value.h (print_address_demangle): Add GDBARCH parameter. * printcmd.c (print_address_demangle): Add GDBARCH parameter. * c-valprint.c (print_function_pointer_address, c_val_print): Update call. * f-valprint.c (f_val_print): Update call. * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call. * jv-valprint.c (java_val_print): Update call. * m2-valprint.c (print_function_pointer_address, m2_val_print): Update call. * p-valprint.c (pascal_val_print): Update call. * disasm.c (gdb_disassemble_info): Install architecture into di.application_data field. testsuite/ChangeLog: * gdb.threads/tls-shared.exp: Update to locexpr_describe_location change to prefix TLS offset in hex with 0x. doc/ChangeLog: * gdbint.texinfo (Item Output Functions): Update signature for ui_out_field_core_addr.
2009-07-02 19:21:10 +02:00
struct gdbarch *gdbarch;
struct obstack *obstack;
int module_count;
};
static void
core_process_module_section (bfd *abfd, asection *sect, void *obj)
{
struct cpms_data *data = obj;
* defs.h (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * gdbcore.h (read_memory_integer, safe_read_memory_integer, read_memory_unsigned_integer, write_memory_signed_integer, write_memory_unsigned_integer): Add BYTE_ORDER parameter. * corefile.c (struct captured_read_memory_integer_arguments): Add BYTE_ORDER member. (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into struct captured_read_memory_integer_arguments. (do_captured_read_memory_integer): Pass it to read_memory_integer. (read_memory_integer): Add BYTE_ORDER parameter. Pass it to extract_signed_integer. (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it to store_signed_integer. (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to store_unsigned_integer. * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter. * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. Update calls to extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer, read_memory_integer, read_memory_unsigned_integer, safe_read_memory_integer, write_memory_signed_integer, write_memory_unsigned_integer, and get_target_memory_unsigned to pass byte order: * ada-lang.c (ada_value_binop): Update. * ada-valprint.c (char_at): Update. * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update. * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call, alpha_extract_return_value, alpha_read_insn, alpha_get_longjmp_target): Update. * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update. * amd64obsd-tdep.c (amd64obsd_supply_uthread, amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update. * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue, amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel, amd64_displaced_step_fixup): Update. * arm-linux-tdep.c (arm_linux_sigreturn_init, arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update. * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value, arm_store_return_value, arm_return_value): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. * auxv.c (default_auxv_parse): Update. * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address, avr_scan_prologue, avr_extract_return_value, avr_frame_prev_register, avr_push_dummy_call): Update. * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset, bsd_uthread_wait, bsd_uthread_thread_alive, bsd_uthread_extra_thread_info): Update. * c-lang.c (c_printstr, print_wchar): Update. * cp-valprint.c (cp_print_class_member): Update. * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache, cris_push_dummy_call, cris_scan_prologue, cris_store_return_value, cris_extract_return_value, find_step_target, dip_prefix, sixteen_bit_offset_branch_op, none_reg_mode_jump_op, move_mem_to_reg_movem_op, get_data_from_address): Update. * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update. * dwarf2-frame.c (execute_cfa_program): Update. * dwarf2loc.c (find_location_expression): Update. * dwarf2read.c (dwarf2_const_value): Update. * expprint.c (print_subexp_standard): Update. * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address, unsigned_address_to_pointer, address_to_signed_pointer, read_var_value): Update. * frame.c (frame_unwind_register_signed, frame_unwind_register_unsigned, get_frame_memory_signed, get_frame_memory_unsigned): Update. * frame-unwind.c (frame_unwind_got_constant): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp, frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache): Update. * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue, frv_extract_return_value, find_func_descr, frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update. * f-valprint.c (f_val_print): Update. * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr): Update. * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue, h8300_push_dummy_call, h8300_extract_return_value, h8300h_extract_return_value, h8300_store_return_value, h8300h_store_return_value): Update. * hppabsd-tdep.c (hppabsd_find_global_pointer): Update. * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline, hppa64_hpux_in_solib_call_trampoline, hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code, hppa_hpux_sigtramp_frame_unwind_cache, hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer, hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern, hppa32_hpux_search_dummy_call_sequence, hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state, hppa_hpux_unwind_adjust_stub): Update. * hppa-linux-tdep.c (insns_match_pattern, hppa_linux_find_global_pointer): Update. * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call, hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call, skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache, hppa_pseudo_register_read, hppa_frame_prev_register_helper, hppa_match_insns): Update. * hpux-thread.c (hpux_thread_fetch_registers): Update. * i386-tdep.c (i386bsd_sigcontext_addr): Update. * i386-cygwin-tdep.c (core_process_module_section): Update. * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn, amd64_darwin_sstep_at_sigreturn): Update. * i386-darwin-tdep.c (i386_darwin_sigcontext_addr, amd64_darwin_sigcontext_addr): Likewise. * i386-linux-nat.c (i386_linux_sigcontext_addr): Update. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update. * i386-nto-tdep.c (i386nto_sigcontext_addr): Update. * i386obsd-nat.c (i386obsd_supply_pcb): Update. * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread, i386obsd_trapframe_cache): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump, i386_analyze_frame_setup, i386_analyze_prologue, i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache, i386_get_longjmp_target, i386_push_dummy_call, i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr, i386_fetch_pointer_argument): Update. * i387-tdep.c (i387_supply_fsave): Update. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update. * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write, examine_prologue, ia64_frame_cache, ia64_frame_prev_register, ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register, ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id, ia64_libunwind_frame_prev_register, ia64_libunwind_sigtramp_frame_this_id, ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer, find_extant_func_descr, find_func_descr, ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id, ia64_unwind_pc): Update. * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer, iq2000_scan_prologue, iq2000_extract_return_value, iq2000_push_dummy_call): Update. * irix5nat.c (fill_gregset): Update. * jv-lang.c (evaluate_subexp_java): Update. * jv-valprint.c (java_value_print): Update. * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call, lm32_extract_return_value, lm32_store_return_value): Update. * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value, m32c_skip_trampoline_code, m32c_m16c_address_to_pointer, m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_store_return_value, decode_prologue, m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value): Update. * m68hc11-tdep.c (m68hc11_pseudo_register_read, m68hc11_pseudo_register_write, m68hc11_analyze_instruction, m68hc11_push_dummy_call): Update. * m68linux-tdep.c (m68k_linux_pc_in_sigtramp, m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache): Update. * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup, m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache, m68k_get_longjmp_target): Update. * m88k-tdep.c (m88k_fetch_instruction): Update. * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write, mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update. * mi/mi-main.c (mi_cmd_data_write_memory): Update. * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg, mips64_linux_get_longjmp_target, mips64_fill_gregset, mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update. * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update. * mips-tdep.c (mips_fetch_instruction, fetch_mips_16, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call, mips_single_step_through_delay, mips_skip_pic_trampoline_code, mips_integer_to_address): Update. * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call): Update. * monitor.c (monitor_supply_register, monitor_write_memory, monitor_read_memory_single): Update. * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value, moxie_analyze_prologue): Update. * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor, mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info, mt_push_dummy_call): Update. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class, find_implementation_from_class): Update. * ppc64-linux-tdep.c (ppc64_desc_entry_point, ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache): Update. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer, ppcobsd_sigtramp_frame_cache): Update. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call, do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_return_value): Update. * ppc-linux-nat.c (ppc_linux_auxv_parse): Update. * procfs.c (procfs_auxv_parse): Update. * p-valprint.c (pascal_val_print): Update. * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned, regcache_raw_write_signed, regcache_raw_write_unsigned, regcache_cooked_read_signed, regcache_cooked_read_unsigned, regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update. * remote-m32r-sdi.c (m32r_fetch_register): Update. * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory): Update. * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value, rs6000_convert_from_func_ptr_addr, branch_dest, rs6000_software_single_step): Update. * rs6000-tdep.c (rs6000_in_function_epilogue_p, ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence, bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue, rs6000_skip_main_prologue, rs6000_skip_trampoline_code, rs6000_frame_cache): Update. * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write, s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load, s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache, extend_simple_arg, s390_push_dummy_call, s390_return_value): Update. * scm-exp.c (scm_lreadr): Update. * scm-lang.c (scm_get_field, scm_unpack): Update. * scm-valprint.c (scm_val_print): Update. * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call, score_fetch_inst): Update. * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way, sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value, sh64_pseudo_register_read, sh64_pseudo_register_write, sh64_frame_prev_register): Update: * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu, sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update. * solib-darwin.c (darwin_load_image_infos): Update. * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2, find_canonical_descriptor_in_load_object): Update. * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Update. * solib-som.c (som_solib_create_inferior_hook, link_map_start, som_current_sos, som_open_symbol_file_object): Update. * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME): Update. * solib-svr4.c (read_program_header, scan_dyntag_auxv, solib_svr4_r_ldsomap): Update. * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update. * sparc64obsd-tdep.c (sparc64obsd_supply_uthread, sparc64obsd_collect_uthread): Update. * sparc64-tdep.c (sparc64_pseudo_register_read, sparc64_pseudo_register_write, sparc64_supply_gregset, sparc64_collect_gregset): Update. * sparc-linux-tdep.c (sparc32_linux_step_trap): Update. * sparcobsd-tdep.c (sparc32obsd_supply_uthread, sparc32obsd_collect_uthread): Update. * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code, sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow, sparc_collect_rwindow): Update. * spu-linux-nat.c (parse_spufs_run): Update. * spu-tdep.c (spu_pseudo_register_read_spu, spu_pseudo_register_write_spu, spu_pointer_to_address, spu_analyze_prologue, spu_in_function_epilogue_p, spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step, spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect, info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist, info_spu_dma_command, info_spu_proxydma_command): Update. * stack.c (print_frame_nameless_args, frame_info): Update. * symfile.c (read_target_long_array, simple_read_overlay_table, simple_read_overlay_region_table): Update. * target.c (debug_print_register): Update. * tramp-frame.c (tramp_frame_start): Update. * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call, v850_extract_return_value, v850_store_return_value, * valarith.c (value_binop, value_bit_index): Update. * valops.c (value_cast): Update. * valprint.c (val_print_type_code_int, val_print_string, read_string): Update. * value.c (unpack_long, unpack_double, unpack_field_as_long, modify_field, pack_long): Update. * vax-tdep.c (vax_store_arguments, vax_push_dummy_call, vax_skip_prologue): Update. * xstormy16-tdep.c (xstormy16_push_dummy_call, xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p, xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry, xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update. * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read, xtensa_pseudo_register_write, xtensa_frame_cache, xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update. * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. (decimal_to_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. Pass it to match_endianness. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. Pass them to match_endianness. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. Pass them to match_endianness. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. Pass them to match_endianness. * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and BYTE_ORDER_Y output parameters. (value_binop): Update call to value_args_as_decimal. Update calls to decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero, decimal_binop, decimal_compare and decimal_convert to pass/receive byte order: * c-exp.y (parse_number): Update. * printcmd.c (printf_command): Update. * valarith.c (value_args_as_decimal, value_binop, value_logical_not, value_equal, value_less): Update. * valops.c (value_cast, value_one): Update. * valprint.c (print_decimal_floating): Update. * value.c (unpack_long, unpack_double): Update. * python/python-value.c (valpy_nonzero): Update. * ada-valprint.c (char_at): Add BYTE_ORDER parameter. (printstr): Update calls to char_at. (ada_val_print_array): Likewise. * valprint.c (read_string): Add BYTE_ORDER parameter. (val_print_string): Update call to read_string. * c-lang.c (c_get_string): Likewise. * charset.h (target_wide_charset): Add BYTE_ORDER parameter. * charset.c (target_wide_charset): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * printcmd.c (printf_command): Update calls to target_wide_charset. * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter. Pass to target_wide_charset. Use it instead of current_gdbarch. (classify_type): Add BYTE_ORDER parameter. Pass to charset_for_string_type. Allow NULL encoding pointer. (print_wchar): Add BYTE_ORDER parameter. (c_emit_char): Update calls to classify_type and print_wchar. (c_printchar, c_printstr): Likewise. * gdbarch.sh (in_solib_return_trampoline): Convert to type "m". * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH parameter. * arch-utils.c (generic_in_solib_return_trampoline): Likewise. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise. (rs6000_skip_trampoline_code): Update call. * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to dynamic_sigtramp_offset and pc_in_sigtramp callbacks. (alpha_read_insn): Add GDBARCH parameter. * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter. (alpha_register_to_value): Pass architecture to alpha_sts. (alpha_extract_return_value): Likewise. (alpha_value_to_register): Pass architecture to alpha_lds. (alpha_store_return_value): Likewise. (alpha_read_insn): Add GDBARCH parameter. (alpha_skip_prologue): Pass architecture to alpha_read_insn. (alpha_heuristic_proc_start): Likewise. (alpha_heuristic_frame_unwind_cache): Likewise. (alpha_next_pc): Likewise. (alpha_sigtramp_frame_this_id): Pass architecture to tdep->dynamic_sigtramp_offset callback. (alpha_sigtramp_frame_sniffer): Pass architecture to tdep->pc_in_sigtramp callback. * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter. (alphafbsd_sigtramp_offset): Likewise. * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH parameter. Pass to alpha_read_insn. (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset_1. (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset. (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn and alpha_linux_sigtramp_offset. * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter. (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alphanbsd_sigtramp_offset. * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter. (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_read_insn. (alphaobsd_sigcontext_addr): Pass architecture to alphaobsd_sigtramp_offset. * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH parameter. * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter. (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue. (amd64_frame_cache): Likewise. * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove. (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros. * arm-wince-tdep.c: Include "frame.h". * avr-tdep.c (EXTRACT_INSN): Remove. (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN. (avr_skip_prologue): Pass architecture to avr_scan_prologue. (avr_frame_unwind_cache): Likewise. * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member. (find_step_target): Initialize it. (get_data_from_address): Add BYTE_ORDER parameter. (bdap_prefix): Pass byte order to get_data_from_address. (handle_prefix_assign_mode_for_aritm_op): Likewise. (three_operand_add_sub_cmp_and_or_op): Likewise. (handle_inc_and_index_mode_for_aritm_op): Likewise. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter. (frv_linux_sigcontext_reg_addr): Pass architecture to frv_linux_pc_in_sigtramp. (frv_linux_sigtramp_frame_sniffer): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter. (h8300_analyze_prologue): Add GDBARCH parameter. Pass to h8300_is_argument_spill. (h8300_frame_cache, h8300_skip_prologue): Pass architecture to h8300_analyze_prologue. * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to in_solib_call_trampoline callback. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH parameter. (hppa64_push_dummy_call): Pass architecture to hppa64_convert_code_addr_to_fptr. (hppa_match_insns): Add GDBARCH parameter. (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to hppa_match_insns. (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to hppa_match_insns_relaxed. (hppa_stub_unwind_sniffer): Pass architecture to tdep->in_solib_call_trampoline callback. * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter. (hppa32_hpux_search_dummy_call_sequence): Pass architecture to hppa_hpux_search_pattern. * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter. (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter. Pass to insns_match_pattern. (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to hppa_linux_sigtramp_find_sigcontext. (hppa_linux_sigtramp_frame_sniffer): Likewise. (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter. (hppa64_hpux_in_solib_call_trampoline): Likewise. * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter. (i386_analyze_frame_setup): Add GDBARCH parameter. (i386_analyze_prologue): Add GDBARCH parameter. Pass to i386_follow_jump and i386_analyze_frame_setup. (i386_skip_prologue): Pass architecture to i386_analyze_prologue and i386_follow_jump. (i386_frame_cache): Pass architecture to i386_analyze_prologue. (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass frame to i386_pe_skip_trampoline_code. * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to sigcontext_register_address callback. * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter. (ia64_find_unwind_table): Pass architecture to ia64_find_global_pointer. (find_extant_func_descr): Add GDBARCH parameter. (find_func_descr): Pass architecture to find_extant_func_descr and ia64_find_global_pointer. (ia64_sigtramp_frame_init_saved_regs): Pass architecture to tdep->sigcontext_register_address callback. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add GDBARCH parameter. * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter. (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue. * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter. (lm32_skip_prologue, lm32_frame_cache): Pass architecture to lm32_analyze_prologue. * m32r-tdep.c (decode_prologue): Add GDBARCH parameter. (m32r_skip_prologue): Pass architecture to decode_prologue. * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter. (m68hc11_scan_prologue): Pass architecture to m68hc11_analyze_instruction. * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter. (m68k_analyze_prologue): Pass architecture to m68k_analyze_frame_setup. * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter. (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order to m88k_fetch_instruction. (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue. (m88k_frame_cache): Likewise. * mep-tdep.c (mep_get_insn): Add GDBARCH parameter. (mep_analyze_prologue): Pass architecture to mep_get_insn. * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter. (mips32_next_pc): Pass architecture to mips_fetch_instruction. (deal_with_atomic_sequence): Likewise. (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction. (mips16_scan_prologue): Likewise. (mips32_scan_prologue): Likewise. (mips16_in_function_epilogue_p): Likewise. (mips32_in_function_epilogue_p): Likewise. (mips_about_to_return): Likewise. (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue. (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue. (mips_skip_prologue): Pass architecture to mips16_scan_prologue and mips32_scan_prologue. (mips_in_function_epilogue_p): Pass architecture to mips16_in_function_epilogue_p and mips32_in_function_epilogue_p. (heuristic_proc_start): Pass architecture to mips_fetch_instruction and mips_about_to_return. (mips_skip_mips16_trampoline_code): Pass architecture to mips_fetch_instruction. (fetch_mips_16): Add GDBARCH parameter. (mips16_next_pc): Pass architecture to fetch_mips_16. (extended_mips16_next_pc): Pass architecture to unpack_mips16 and fetch_mips_16. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class): Add GDBARCH parameter. (find_implementation_from_class): Add GDBARCH parameter, pass to read_objc_class, read_objc_methlist_nmethods, and read_objc_methlist_method. (find_implementation): Add GDBARCH parameter, pass to read_objc_object and find_implementation_from_class. (resolve_msgsend, resolve_msgsend_stret): Pass architecture to find_implementation. (resolve_msgsend_super, resolve_msgsend_super_stret): Pass architecture to read_objc_super and find_implementation_from_class. * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter. (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target, ppc64_standard_linkage3_target): Pass architecture to ppc64_desc_entry_point. * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter. (skip_prologue): Pass byte order to bl_to_blrl_insn_p. (rs6000_fetch_instruction): Add GDBARCH parameter. (rs6000_skip_stack_check): Add GDBARCH parameter, pass to rs6000_fetch_instruction. (skip_prologue): Pass architecture to rs6000_fetch_instruction. * remote-mips.c (mips_store_word): Return old_contents as host integer value instead of target bytes. * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member. (s390_analyze_prologue): Initialize it. (extend_simple_arg): Add GDBARCH parameter. (s390_push_dummy_call): Pass architecture to extend_simple_arg. * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter. * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter. (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field. * scm-valprint.c (scm_scmval_print): Likewise. (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define SCM_BYTE_ORDER. * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter. (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to look_for_args_moves. (sh64_skip_prologue): Pass architecture to sh64_skip_prologue_hard_way. * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter. (sh_skip_prologue): Pass architecture to sh_analyze_prologue. (sh_frame_cache): Likewise. * solib-irix.c (extract_mips_address): Add GDBARCH parameter. (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Pass architecture to extract_mips_address. * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter. * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter. (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture to sparc_fetch_wcookie. (sparc32_frame_prev_register): Likewise. * sparc64-tdep.c (sparc64_frame_prev_register): Likewise. * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter. (spu_skip_prologue): Pass architecture to spu_analyze_prologue. (spu_virtual_frame_pointer): Likewise. (spu_frame_unwind_cache): Likewise. (info_spu_mailbox_list): Add BYTE_ORER parameter. (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list. (info_spu_dma_cmdlist): Add BYTE_ORER parameter. (info_spu_dma_command, info_spu_proxydma_command): Pass byte order to info_spu_dma_cmdlist. * symfile.c (read_target_long_array): Add GDBARCH parameter. (simple_read_overlay_table, simple_read_overlay_region_table, simple_overlay_update_1): Pass architecture to read_target_long_array. * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter. (v850_frame_cache): Pass architecture to v850_analyze_prologue. * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH parameter. (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture to xstormy16_analyze_prologue. (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter. (xstormy16_find_jmp_table_entry): Likewise. (xstormy16_skip_trampoline_code): Pass architecture to xstormy16_resolve_jmp_table_entry. (xstormy16_pointer_to_address): Likewise. (xstormy16_address_to_pointer): Pass architecture to xstormy16_find_jmp_table_entry. * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter. (call0_analyze_prologue): Add GDBARCH parameter, pass to call0_track_op. (call0_frame_cache): Pass architecture to call0_analyze_prologue. (xtensa_skip_prologue): Likewise.
2009-07-02 19:25:59 +02:00
enum bfd_endian byte_order = gdbarch_byte_order (data->gdbarch);
char *module_name;
size_t module_name_size;
CORE_ADDR base_addr;
char *buf = NULL;
if (strncmp (sect->name, ".module", 7) != 0)
return;
buf = xmalloc (bfd_get_section_size (sect) + 1);
if (!buf)
{
printf_unfiltered ("memory allocation failed for %s\n", sect->name);
goto out;
}
if (!bfd_get_section_contents (abfd, sect,
buf, 0, bfd_get_section_size (sect)))
goto out;
/* A DWORD (data_type) followed by struct windows_core_module_info. */
base_addr =
* defs.h (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * gdbcore.h (read_memory_integer, safe_read_memory_integer, read_memory_unsigned_integer, write_memory_signed_integer, write_memory_unsigned_integer): Add BYTE_ORDER parameter. * corefile.c (struct captured_read_memory_integer_arguments): Add BYTE_ORDER member. (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into struct captured_read_memory_integer_arguments. (do_captured_read_memory_integer): Pass it to read_memory_integer. (read_memory_integer): Add BYTE_ORDER parameter. Pass it to extract_signed_integer. (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it to store_signed_integer. (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to store_unsigned_integer. * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter. * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. Update calls to extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer, read_memory_integer, read_memory_unsigned_integer, safe_read_memory_integer, write_memory_signed_integer, write_memory_unsigned_integer, and get_target_memory_unsigned to pass byte order: * ada-lang.c (ada_value_binop): Update. * ada-valprint.c (char_at): Update. * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update. * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call, alpha_extract_return_value, alpha_read_insn, alpha_get_longjmp_target): Update. * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update. * amd64obsd-tdep.c (amd64obsd_supply_uthread, amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update. * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue, amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel, amd64_displaced_step_fixup): Update. * arm-linux-tdep.c (arm_linux_sigreturn_init, arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update. * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value, arm_store_return_value, arm_return_value): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. * auxv.c (default_auxv_parse): Update. * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address, avr_scan_prologue, avr_extract_return_value, avr_frame_prev_register, avr_push_dummy_call): Update. * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset, bsd_uthread_wait, bsd_uthread_thread_alive, bsd_uthread_extra_thread_info): Update. * c-lang.c (c_printstr, print_wchar): Update. * cp-valprint.c (cp_print_class_member): Update. * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache, cris_push_dummy_call, cris_scan_prologue, cris_store_return_value, cris_extract_return_value, find_step_target, dip_prefix, sixteen_bit_offset_branch_op, none_reg_mode_jump_op, move_mem_to_reg_movem_op, get_data_from_address): Update. * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update. * dwarf2-frame.c (execute_cfa_program): Update. * dwarf2loc.c (find_location_expression): Update. * dwarf2read.c (dwarf2_const_value): Update. * expprint.c (print_subexp_standard): Update. * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address, unsigned_address_to_pointer, address_to_signed_pointer, read_var_value): Update. * frame.c (frame_unwind_register_signed, frame_unwind_register_unsigned, get_frame_memory_signed, get_frame_memory_unsigned): Update. * frame-unwind.c (frame_unwind_got_constant): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp, frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache): Update. * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue, frv_extract_return_value, find_func_descr, frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update. * f-valprint.c (f_val_print): Update. * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr): Update. * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue, h8300_push_dummy_call, h8300_extract_return_value, h8300h_extract_return_value, h8300_store_return_value, h8300h_store_return_value): Update. * hppabsd-tdep.c (hppabsd_find_global_pointer): Update. * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline, hppa64_hpux_in_solib_call_trampoline, hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code, hppa_hpux_sigtramp_frame_unwind_cache, hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer, hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern, hppa32_hpux_search_dummy_call_sequence, hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state, hppa_hpux_unwind_adjust_stub): Update. * hppa-linux-tdep.c (insns_match_pattern, hppa_linux_find_global_pointer): Update. * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call, hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call, skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache, hppa_pseudo_register_read, hppa_frame_prev_register_helper, hppa_match_insns): Update. * hpux-thread.c (hpux_thread_fetch_registers): Update. * i386-tdep.c (i386bsd_sigcontext_addr): Update. * i386-cygwin-tdep.c (core_process_module_section): Update. * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn, amd64_darwin_sstep_at_sigreturn): Update. * i386-darwin-tdep.c (i386_darwin_sigcontext_addr, amd64_darwin_sigcontext_addr): Likewise. * i386-linux-nat.c (i386_linux_sigcontext_addr): Update. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update. * i386-nto-tdep.c (i386nto_sigcontext_addr): Update. * i386obsd-nat.c (i386obsd_supply_pcb): Update. * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread, i386obsd_trapframe_cache): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump, i386_analyze_frame_setup, i386_analyze_prologue, i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache, i386_get_longjmp_target, i386_push_dummy_call, i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr, i386_fetch_pointer_argument): Update. * i387-tdep.c (i387_supply_fsave): Update. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update. * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write, examine_prologue, ia64_frame_cache, ia64_frame_prev_register, ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register, ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id, ia64_libunwind_frame_prev_register, ia64_libunwind_sigtramp_frame_this_id, ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer, find_extant_func_descr, find_func_descr, ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id, ia64_unwind_pc): Update. * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer, iq2000_scan_prologue, iq2000_extract_return_value, iq2000_push_dummy_call): Update. * irix5nat.c (fill_gregset): Update. * jv-lang.c (evaluate_subexp_java): Update. * jv-valprint.c (java_value_print): Update. * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call, lm32_extract_return_value, lm32_store_return_value): Update. * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value, m32c_skip_trampoline_code, m32c_m16c_address_to_pointer, m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_store_return_value, decode_prologue, m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value): Update. * m68hc11-tdep.c (m68hc11_pseudo_register_read, m68hc11_pseudo_register_write, m68hc11_analyze_instruction, m68hc11_push_dummy_call): Update. * m68linux-tdep.c (m68k_linux_pc_in_sigtramp, m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache): Update. * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup, m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache, m68k_get_longjmp_target): Update. * m88k-tdep.c (m88k_fetch_instruction): Update. * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write, mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update. * mi/mi-main.c (mi_cmd_data_write_memory): Update. * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg, mips64_linux_get_longjmp_target, mips64_fill_gregset, mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update. * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update. * mips-tdep.c (mips_fetch_instruction, fetch_mips_16, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call, mips_single_step_through_delay, mips_skip_pic_trampoline_code, mips_integer_to_address): Update. * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call): Update. * monitor.c (monitor_supply_register, monitor_write_memory, monitor_read_memory_single): Update. * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value, moxie_analyze_prologue): Update. * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor, mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info, mt_push_dummy_call): Update. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class, find_implementation_from_class): Update. * ppc64-linux-tdep.c (ppc64_desc_entry_point, ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache): Update. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer, ppcobsd_sigtramp_frame_cache): Update. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call, do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_return_value): Update. * ppc-linux-nat.c (ppc_linux_auxv_parse): Update. * procfs.c (procfs_auxv_parse): Update. * p-valprint.c (pascal_val_print): Update. * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned, regcache_raw_write_signed, regcache_raw_write_unsigned, regcache_cooked_read_signed, regcache_cooked_read_unsigned, regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update. * remote-m32r-sdi.c (m32r_fetch_register): Update. * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory): Update. * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value, rs6000_convert_from_func_ptr_addr, branch_dest, rs6000_software_single_step): Update. * rs6000-tdep.c (rs6000_in_function_epilogue_p, ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence, bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue, rs6000_skip_main_prologue, rs6000_skip_trampoline_code, rs6000_frame_cache): Update. * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write, s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load, s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache, extend_simple_arg, s390_push_dummy_call, s390_return_value): Update. * scm-exp.c (scm_lreadr): Update. * scm-lang.c (scm_get_field, scm_unpack): Update. * scm-valprint.c (scm_val_print): Update. * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call, score_fetch_inst): Update. * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way, sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value, sh64_pseudo_register_read, sh64_pseudo_register_write, sh64_frame_prev_register): Update: * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu, sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update. * solib-darwin.c (darwin_load_image_infos): Update. * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2, find_canonical_descriptor_in_load_object): Update. * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Update. * solib-som.c (som_solib_create_inferior_hook, link_map_start, som_current_sos, som_open_symbol_file_object): Update. * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME): Update. * solib-svr4.c (read_program_header, scan_dyntag_auxv, solib_svr4_r_ldsomap): Update. * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update. * sparc64obsd-tdep.c (sparc64obsd_supply_uthread, sparc64obsd_collect_uthread): Update. * sparc64-tdep.c (sparc64_pseudo_register_read, sparc64_pseudo_register_write, sparc64_supply_gregset, sparc64_collect_gregset): Update. * sparc-linux-tdep.c (sparc32_linux_step_trap): Update. * sparcobsd-tdep.c (sparc32obsd_supply_uthread, sparc32obsd_collect_uthread): Update. * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code, sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow, sparc_collect_rwindow): Update. * spu-linux-nat.c (parse_spufs_run): Update. * spu-tdep.c (spu_pseudo_register_read_spu, spu_pseudo_register_write_spu, spu_pointer_to_address, spu_analyze_prologue, spu_in_function_epilogue_p, spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step, spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect, info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist, info_spu_dma_command, info_spu_proxydma_command): Update. * stack.c (print_frame_nameless_args, frame_info): Update. * symfile.c (read_target_long_array, simple_read_overlay_table, simple_read_overlay_region_table): Update. * target.c (debug_print_register): Update. * tramp-frame.c (tramp_frame_start): Update. * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call, v850_extract_return_value, v850_store_return_value, * valarith.c (value_binop, value_bit_index): Update. * valops.c (value_cast): Update. * valprint.c (val_print_type_code_int, val_print_string, read_string): Update. * value.c (unpack_long, unpack_double, unpack_field_as_long, modify_field, pack_long): Update. * vax-tdep.c (vax_store_arguments, vax_push_dummy_call, vax_skip_prologue): Update. * xstormy16-tdep.c (xstormy16_push_dummy_call, xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p, xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry, xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update. * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read, xtensa_pseudo_register_write, xtensa_frame_cache, xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update. * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. (decimal_to_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. Pass it to match_endianness. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. Pass them to match_endianness. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. Pass them to match_endianness. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. Pass them to match_endianness. * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and BYTE_ORDER_Y output parameters. (value_binop): Update call to value_args_as_decimal. Update calls to decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero, decimal_binop, decimal_compare and decimal_convert to pass/receive byte order: * c-exp.y (parse_number): Update. * printcmd.c (printf_command): Update. * valarith.c (value_args_as_decimal, value_binop, value_logical_not, value_equal, value_less): Update. * valops.c (value_cast, value_one): Update. * valprint.c (print_decimal_floating): Update. * value.c (unpack_long, unpack_double): Update. * python/python-value.c (valpy_nonzero): Update. * ada-valprint.c (char_at): Add BYTE_ORDER parameter. (printstr): Update calls to char_at. (ada_val_print_array): Likewise. * valprint.c (read_string): Add BYTE_ORDER parameter. (val_print_string): Update call to read_string. * c-lang.c (c_get_string): Likewise. * charset.h (target_wide_charset): Add BYTE_ORDER parameter. * charset.c (target_wide_charset): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * printcmd.c (printf_command): Update calls to target_wide_charset. * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter. Pass to target_wide_charset. Use it instead of current_gdbarch. (classify_type): Add BYTE_ORDER parameter. Pass to charset_for_string_type. Allow NULL encoding pointer. (print_wchar): Add BYTE_ORDER parameter. (c_emit_char): Update calls to classify_type and print_wchar. (c_printchar, c_printstr): Likewise. * gdbarch.sh (in_solib_return_trampoline): Convert to type "m". * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH parameter. * arch-utils.c (generic_in_solib_return_trampoline): Likewise. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise. (rs6000_skip_trampoline_code): Update call. * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to dynamic_sigtramp_offset and pc_in_sigtramp callbacks. (alpha_read_insn): Add GDBARCH parameter. * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter. (alpha_register_to_value): Pass architecture to alpha_sts. (alpha_extract_return_value): Likewise. (alpha_value_to_register): Pass architecture to alpha_lds. (alpha_store_return_value): Likewise. (alpha_read_insn): Add GDBARCH parameter. (alpha_skip_prologue): Pass architecture to alpha_read_insn. (alpha_heuristic_proc_start): Likewise. (alpha_heuristic_frame_unwind_cache): Likewise. (alpha_next_pc): Likewise. (alpha_sigtramp_frame_this_id): Pass architecture to tdep->dynamic_sigtramp_offset callback. (alpha_sigtramp_frame_sniffer): Pass architecture to tdep->pc_in_sigtramp callback. * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter. (alphafbsd_sigtramp_offset): Likewise. * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH parameter. Pass to alpha_read_insn. (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset_1. (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset. (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn and alpha_linux_sigtramp_offset. * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter. (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alphanbsd_sigtramp_offset. * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter. (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_read_insn. (alphaobsd_sigcontext_addr): Pass architecture to alphaobsd_sigtramp_offset. * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH parameter. * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter. (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue. (amd64_frame_cache): Likewise. * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove. (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros. * arm-wince-tdep.c: Include "frame.h". * avr-tdep.c (EXTRACT_INSN): Remove. (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN. (avr_skip_prologue): Pass architecture to avr_scan_prologue. (avr_frame_unwind_cache): Likewise. * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member. (find_step_target): Initialize it. (get_data_from_address): Add BYTE_ORDER parameter. (bdap_prefix): Pass byte order to get_data_from_address. (handle_prefix_assign_mode_for_aritm_op): Likewise. (three_operand_add_sub_cmp_and_or_op): Likewise. (handle_inc_and_index_mode_for_aritm_op): Likewise. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter. (frv_linux_sigcontext_reg_addr): Pass architecture to frv_linux_pc_in_sigtramp. (frv_linux_sigtramp_frame_sniffer): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter. (h8300_analyze_prologue): Add GDBARCH parameter. Pass to h8300_is_argument_spill. (h8300_frame_cache, h8300_skip_prologue): Pass architecture to h8300_analyze_prologue. * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to in_solib_call_trampoline callback. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH parameter. (hppa64_push_dummy_call): Pass architecture to hppa64_convert_code_addr_to_fptr. (hppa_match_insns): Add GDBARCH parameter. (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to hppa_match_insns. (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to hppa_match_insns_relaxed. (hppa_stub_unwind_sniffer): Pass architecture to tdep->in_solib_call_trampoline callback. * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter. (hppa32_hpux_search_dummy_call_sequence): Pass architecture to hppa_hpux_search_pattern. * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter. (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter. Pass to insns_match_pattern. (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to hppa_linux_sigtramp_find_sigcontext. (hppa_linux_sigtramp_frame_sniffer): Likewise. (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter. (hppa64_hpux_in_solib_call_trampoline): Likewise. * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter. (i386_analyze_frame_setup): Add GDBARCH parameter. (i386_analyze_prologue): Add GDBARCH parameter. Pass to i386_follow_jump and i386_analyze_frame_setup. (i386_skip_prologue): Pass architecture to i386_analyze_prologue and i386_follow_jump. (i386_frame_cache): Pass architecture to i386_analyze_prologue. (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass frame to i386_pe_skip_trampoline_code. * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to sigcontext_register_address callback. * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter. (ia64_find_unwind_table): Pass architecture to ia64_find_global_pointer. (find_extant_func_descr): Add GDBARCH parameter. (find_func_descr): Pass architecture to find_extant_func_descr and ia64_find_global_pointer. (ia64_sigtramp_frame_init_saved_regs): Pass architecture to tdep->sigcontext_register_address callback. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add GDBARCH parameter. * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter. (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue. * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter. (lm32_skip_prologue, lm32_frame_cache): Pass architecture to lm32_analyze_prologue. * m32r-tdep.c (decode_prologue): Add GDBARCH parameter. (m32r_skip_prologue): Pass architecture to decode_prologue. * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter. (m68hc11_scan_prologue): Pass architecture to m68hc11_analyze_instruction. * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter. (m68k_analyze_prologue): Pass architecture to m68k_analyze_frame_setup. * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter. (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order to m88k_fetch_instruction. (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue. (m88k_frame_cache): Likewise. * mep-tdep.c (mep_get_insn): Add GDBARCH parameter. (mep_analyze_prologue): Pass architecture to mep_get_insn. * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter. (mips32_next_pc): Pass architecture to mips_fetch_instruction. (deal_with_atomic_sequence): Likewise. (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction. (mips16_scan_prologue): Likewise. (mips32_scan_prologue): Likewise. (mips16_in_function_epilogue_p): Likewise. (mips32_in_function_epilogue_p): Likewise. (mips_about_to_return): Likewise. (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue. (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue. (mips_skip_prologue): Pass architecture to mips16_scan_prologue and mips32_scan_prologue. (mips_in_function_epilogue_p): Pass architecture to mips16_in_function_epilogue_p and mips32_in_function_epilogue_p. (heuristic_proc_start): Pass architecture to mips_fetch_instruction and mips_about_to_return. (mips_skip_mips16_trampoline_code): Pass architecture to mips_fetch_instruction. (fetch_mips_16): Add GDBARCH parameter. (mips16_next_pc): Pass architecture to fetch_mips_16. (extended_mips16_next_pc): Pass architecture to unpack_mips16 and fetch_mips_16. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class): Add GDBARCH parameter. (find_implementation_from_class): Add GDBARCH parameter, pass to read_objc_class, read_objc_methlist_nmethods, and read_objc_methlist_method. (find_implementation): Add GDBARCH parameter, pass to read_objc_object and find_implementation_from_class. (resolve_msgsend, resolve_msgsend_stret): Pass architecture to find_implementation. (resolve_msgsend_super, resolve_msgsend_super_stret): Pass architecture to read_objc_super and find_implementation_from_class. * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter. (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target, ppc64_standard_linkage3_target): Pass architecture to ppc64_desc_entry_point. * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter. (skip_prologue): Pass byte order to bl_to_blrl_insn_p. (rs6000_fetch_instruction): Add GDBARCH parameter. (rs6000_skip_stack_check): Add GDBARCH parameter, pass to rs6000_fetch_instruction. (skip_prologue): Pass architecture to rs6000_fetch_instruction. * remote-mips.c (mips_store_word): Return old_contents as host integer value instead of target bytes. * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member. (s390_analyze_prologue): Initialize it. (extend_simple_arg): Add GDBARCH parameter. (s390_push_dummy_call): Pass architecture to extend_simple_arg. * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter. * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter. (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field. * scm-valprint.c (scm_scmval_print): Likewise. (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define SCM_BYTE_ORDER. * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter. (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to look_for_args_moves. (sh64_skip_prologue): Pass architecture to sh64_skip_prologue_hard_way. * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter. (sh_skip_prologue): Pass architecture to sh_analyze_prologue. (sh_frame_cache): Likewise. * solib-irix.c (extract_mips_address): Add GDBARCH parameter. (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Pass architecture to extract_mips_address. * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter. * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter. (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture to sparc_fetch_wcookie. (sparc32_frame_prev_register): Likewise. * sparc64-tdep.c (sparc64_frame_prev_register): Likewise. * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter. (spu_skip_prologue): Pass architecture to spu_analyze_prologue. (spu_virtual_frame_pointer): Likewise. (spu_frame_unwind_cache): Likewise. (info_spu_mailbox_list): Add BYTE_ORER parameter. (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list. (info_spu_dma_cmdlist): Add BYTE_ORER parameter. (info_spu_dma_command, info_spu_proxydma_command): Pass byte order to info_spu_dma_cmdlist. * symfile.c (read_target_long_array): Add GDBARCH parameter. (simple_read_overlay_table, simple_read_overlay_region_table, simple_overlay_update_1): Pass architecture to read_target_long_array. * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter. (v850_frame_cache): Pass architecture to v850_analyze_prologue. * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH parameter. (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture to xstormy16_analyze_prologue. (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter. (xstormy16_find_jmp_table_entry): Likewise. (xstormy16_skip_trampoline_code): Pass architecture to xstormy16_resolve_jmp_table_entry. (xstormy16_pointer_to_address): Likewise. (xstormy16_address_to_pointer): Pass architecture to xstormy16_find_jmp_table_entry. * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter. (call0_analyze_prologue): Add GDBARCH parameter, pass to call0_track_op. (call0_frame_cache): Pass architecture to call0_analyze_prologue. (xtensa_skip_prologue): Likewise.
2009-07-02 19:25:59 +02:00
extract_unsigned_integer (buf + 4, 4, byte_order);
module_name_size =
* defs.h (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * gdbcore.h (read_memory_integer, safe_read_memory_integer, read_memory_unsigned_integer, write_memory_signed_integer, write_memory_unsigned_integer): Add BYTE_ORDER parameter. * corefile.c (struct captured_read_memory_integer_arguments): Add BYTE_ORDER member. (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into struct captured_read_memory_integer_arguments. (do_captured_read_memory_integer): Pass it to read_memory_integer. (read_memory_integer): Add BYTE_ORDER parameter. Pass it to extract_signed_integer. (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it to store_signed_integer. (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to store_unsigned_integer. * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter. * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. Update calls to extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer, read_memory_integer, read_memory_unsigned_integer, safe_read_memory_integer, write_memory_signed_integer, write_memory_unsigned_integer, and get_target_memory_unsigned to pass byte order: * ada-lang.c (ada_value_binop): Update. * ada-valprint.c (char_at): Update. * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update. * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call, alpha_extract_return_value, alpha_read_insn, alpha_get_longjmp_target): Update. * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update. * amd64obsd-tdep.c (amd64obsd_supply_uthread, amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update. * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue, amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel, amd64_displaced_step_fixup): Update. * arm-linux-tdep.c (arm_linux_sigreturn_init, arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update. * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value, arm_store_return_value, arm_return_value): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. * auxv.c (default_auxv_parse): Update. * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address, avr_scan_prologue, avr_extract_return_value, avr_frame_prev_register, avr_push_dummy_call): Update. * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset, bsd_uthread_wait, bsd_uthread_thread_alive, bsd_uthread_extra_thread_info): Update. * c-lang.c (c_printstr, print_wchar): Update. * cp-valprint.c (cp_print_class_member): Update. * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache, cris_push_dummy_call, cris_scan_prologue, cris_store_return_value, cris_extract_return_value, find_step_target, dip_prefix, sixteen_bit_offset_branch_op, none_reg_mode_jump_op, move_mem_to_reg_movem_op, get_data_from_address): Update. * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update. * dwarf2-frame.c (execute_cfa_program): Update. * dwarf2loc.c (find_location_expression): Update. * dwarf2read.c (dwarf2_const_value): Update. * expprint.c (print_subexp_standard): Update. * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address, unsigned_address_to_pointer, address_to_signed_pointer, read_var_value): Update. * frame.c (frame_unwind_register_signed, frame_unwind_register_unsigned, get_frame_memory_signed, get_frame_memory_unsigned): Update. * frame-unwind.c (frame_unwind_got_constant): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp, frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache): Update. * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue, frv_extract_return_value, find_func_descr, frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update. * f-valprint.c (f_val_print): Update. * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr): Update. * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue, h8300_push_dummy_call, h8300_extract_return_value, h8300h_extract_return_value, h8300_store_return_value, h8300h_store_return_value): Update. * hppabsd-tdep.c (hppabsd_find_global_pointer): Update. * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline, hppa64_hpux_in_solib_call_trampoline, hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code, hppa_hpux_sigtramp_frame_unwind_cache, hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer, hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern, hppa32_hpux_search_dummy_call_sequence, hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state, hppa_hpux_unwind_adjust_stub): Update. * hppa-linux-tdep.c (insns_match_pattern, hppa_linux_find_global_pointer): Update. * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call, hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call, skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache, hppa_pseudo_register_read, hppa_frame_prev_register_helper, hppa_match_insns): Update. * hpux-thread.c (hpux_thread_fetch_registers): Update. * i386-tdep.c (i386bsd_sigcontext_addr): Update. * i386-cygwin-tdep.c (core_process_module_section): Update. * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn, amd64_darwin_sstep_at_sigreturn): Update. * i386-darwin-tdep.c (i386_darwin_sigcontext_addr, amd64_darwin_sigcontext_addr): Likewise. * i386-linux-nat.c (i386_linux_sigcontext_addr): Update. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update. * i386-nto-tdep.c (i386nto_sigcontext_addr): Update. * i386obsd-nat.c (i386obsd_supply_pcb): Update. * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread, i386obsd_trapframe_cache): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump, i386_analyze_frame_setup, i386_analyze_prologue, i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache, i386_get_longjmp_target, i386_push_dummy_call, i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr, i386_fetch_pointer_argument): Update. * i387-tdep.c (i387_supply_fsave): Update. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update. * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write, examine_prologue, ia64_frame_cache, ia64_frame_prev_register, ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register, ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id, ia64_libunwind_frame_prev_register, ia64_libunwind_sigtramp_frame_this_id, ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer, find_extant_func_descr, find_func_descr, ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id, ia64_unwind_pc): Update. * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer, iq2000_scan_prologue, iq2000_extract_return_value, iq2000_push_dummy_call): Update. * irix5nat.c (fill_gregset): Update. * jv-lang.c (evaluate_subexp_java): Update. * jv-valprint.c (java_value_print): Update. * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call, lm32_extract_return_value, lm32_store_return_value): Update. * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value, m32c_skip_trampoline_code, m32c_m16c_address_to_pointer, m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_store_return_value, decode_prologue, m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value): Update. * m68hc11-tdep.c (m68hc11_pseudo_register_read, m68hc11_pseudo_register_write, m68hc11_analyze_instruction, m68hc11_push_dummy_call): Update. * m68linux-tdep.c (m68k_linux_pc_in_sigtramp, m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache): Update. * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup, m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache, m68k_get_longjmp_target): Update. * m88k-tdep.c (m88k_fetch_instruction): Update. * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write, mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update. * mi/mi-main.c (mi_cmd_data_write_memory): Update. * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg, mips64_linux_get_longjmp_target, mips64_fill_gregset, mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update. * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update. * mips-tdep.c (mips_fetch_instruction, fetch_mips_16, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call, mips_single_step_through_delay, mips_skip_pic_trampoline_code, mips_integer_to_address): Update. * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call): Update. * monitor.c (monitor_supply_register, monitor_write_memory, monitor_read_memory_single): Update. * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value, moxie_analyze_prologue): Update. * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor, mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info, mt_push_dummy_call): Update. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class, find_implementation_from_class): Update. * ppc64-linux-tdep.c (ppc64_desc_entry_point, ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache): Update. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer, ppcobsd_sigtramp_frame_cache): Update. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call, do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_return_value): Update. * ppc-linux-nat.c (ppc_linux_auxv_parse): Update. * procfs.c (procfs_auxv_parse): Update. * p-valprint.c (pascal_val_print): Update. * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned, regcache_raw_write_signed, regcache_raw_write_unsigned, regcache_cooked_read_signed, regcache_cooked_read_unsigned, regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update. * remote-m32r-sdi.c (m32r_fetch_register): Update. * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory): Update. * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value, rs6000_convert_from_func_ptr_addr, branch_dest, rs6000_software_single_step): Update. * rs6000-tdep.c (rs6000_in_function_epilogue_p, ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence, bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue, rs6000_skip_main_prologue, rs6000_skip_trampoline_code, rs6000_frame_cache): Update. * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write, s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load, s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache, extend_simple_arg, s390_push_dummy_call, s390_return_value): Update. * scm-exp.c (scm_lreadr): Update. * scm-lang.c (scm_get_field, scm_unpack): Update. * scm-valprint.c (scm_val_print): Update. * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call, score_fetch_inst): Update. * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way, sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value, sh64_pseudo_register_read, sh64_pseudo_register_write, sh64_frame_prev_register): Update: * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu, sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update. * solib-darwin.c (darwin_load_image_infos): Update. * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2, find_canonical_descriptor_in_load_object): Update. * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Update. * solib-som.c (som_solib_create_inferior_hook, link_map_start, som_current_sos, som_open_symbol_file_object): Update. * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME): Update. * solib-svr4.c (read_program_header, scan_dyntag_auxv, solib_svr4_r_ldsomap): Update. * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update. * sparc64obsd-tdep.c (sparc64obsd_supply_uthread, sparc64obsd_collect_uthread): Update. * sparc64-tdep.c (sparc64_pseudo_register_read, sparc64_pseudo_register_write, sparc64_supply_gregset, sparc64_collect_gregset): Update. * sparc-linux-tdep.c (sparc32_linux_step_trap): Update. * sparcobsd-tdep.c (sparc32obsd_supply_uthread, sparc32obsd_collect_uthread): Update. * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code, sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow, sparc_collect_rwindow): Update. * spu-linux-nat.c (parse_spufs_run): Update. * spu-tdep.c (spu_pseudo_register_read_spu, spu_pseudo_register_write_spu, spu_pointer_to_address, spu_analyze_prologue, spu_in_function_epilogue_p, spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step, spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect, info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist, info_spu_dma_command, info_spu_proxydma_command): Update. * stack.c (print_frame_nameless_args, frame_info): Update. * symfile.c (read_target_long_array, simple_read_overlay_table, simple_read_overlay_region_table): Update. * target.c (debug_print_register): Update. * tramp-frame.c (tramp_frame_start): Update. * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call, v850_extract_return_value, v850_store_return_value, * valarith.c (value_binop, value_bit_index): Update. * valops.c (value_cast): Update. * valprint.c (val_print_type_code_int, val_print_string, read_string): Update. * value.c (unpack_long, unpack_double, unpack_field_as_long, modify_field, pack_long): Update. * vax-tdep.c (vax_store_arguments, vax_push_dummy_call, vax_skip_prologue): Update. * xstormy16-tdep.c (xstormy16_push_dummy_call, xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p, xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry, xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update. * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read, xtensa_pseudo_register_write, xtensa_frame_cache, xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update. * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. (decimal_to_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. Pass it to match_endianness. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. Pass them to match_endianness. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. Pass them to match_endianness. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. Pass them to match_endianness. * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and BYTE_ORDER_Y output parameters. (value_binop): Update call to value_args_as_decimal. Update calls to decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero, decimal_binop, decimal_compare and decimal_convert to pass/receive byte order: * c-exp.y (parse_number): Update. * printcmd.c (printf_command): Update. * valarith.c (value_args_as_decimal, value_binop, value_logical_not, value_equal, value_less): Update. * valops.c (value_cast, value_one): Update. * valprint.c (print_decimal_floating): Update. * value.c (unpack_long, unpack_double): Update. * python/python-value.c (valpy_nonzero): Update. * ada-valprint.c (char_at): Add BYTE_ORDER parameter. (printstr): Update calls to char_at. (ada_val_print_array): Likewise. * valprint.c (read_string): Add BYTE_ORDER parameter. (val_print_string): Update call to read_string. * c-lang.c (c_get_string): Likewise. * charset.h (target_wide_charset): Add BYTE_ORDER parameter. * charset.c (target_wide_charset): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * printcmd.c (printf_command): Update calls to target_wide_charset. * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter. Pass to target_wide_charset. Use it instead of current_gdbarch. (classify_type): Add BYTE_ORDER parameter. Pass to charset_for_string_type. Allow NULL encoding pointer. (print_wchar): Add BYTE_ORDER parameter. (c_emit_char): Update calls to classify_type and print_wchar. (c_printchar, c_printstr): Likewise. * gdbarch.sh (in_solib_return_trampoline): Convert to type "m". * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH parameter. * arch-utils.c (generic_in_solib_return_trampoline): Likewise. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise. (rs6000_skip_trampoline_code): Update call. * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to dynamic_sigtramp_offset and pc_in_sigtramp callbacks. (alpha_read_insn): Add GDBARCH parameter. * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter. (alpha_register_to_value): Pass architecture to alpha_sts. (alpha_extract_return_value): Likewise. (alpha_value_to_register): Pass architecture to alpha_lds. (alpha_store_return_value): Likewise. (alpha_read_insn): Add GDBARCH parameter. (alpha_skip_prologue): Pass architecture to alpha_read_insn. (alpha_heuristic_proc_start): Likewise. (alpha_heuristic_frame_unwind_cache): Likewise. (alpha_next_pc): Likewise. (alpha_sigtramp_frame_this_id): Pass architecture to tdep->dynamic_sigtramp_offset callback. (alpha_sigtramp_frame_sniffer): Pass architecture to tdep->pc_in_sigtramp callback. * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter. (alphafbsd_sigtramp_offset): Likewise. * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH parameter. Pass to alpha_read_insn. (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset_1. (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset. (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn and alpha_linux_sigtramp_offset. * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter. (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alphanbsd_sigtramp_offset. * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter. (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_read_insn. (alphaobsd_sigcontext_addr): Pass architecture to alphaobsd_sigtramp_offset. * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH parameter. * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter. (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue. (amd64_frame_cache): Likewise. * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove. (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros. * arm-wince-tdep.c: Include "frame.h". * avr-tdep.c (EXTRACT_INSN): Remove. (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN. (avr_skip_prologue): Pass architecture to avr_scan_prologue. (avr_frame_unwind_cache): Likewise. * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member. (find_step_target): Initialize it. (get_data_from_address): Add BYTE_ORDER parameter. (bdap_prefix): Pass byte order to get_data_from_address. (handle_prefix_assign_mode_for_aritm_op): Likewise. (three_operand_add_sub_cmp_and_or_op): Likewise. (handle_inc_and_index_mode_for_aritm_op): Likewise. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter. (frv_linux_sigcontext_reg_addr): Pass architecture to frv_linux_pc_in_sigtramp. (frv_linux_sigtramp_frame_sniffer): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter. (h8300_analyze_prologue): Add GDBARCH parameter. Pass to h8300_is_argument_spill. (h8300_frame_cache, h8300_skip_prologue): Pass architecture to h8300_analyze_prologue. * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to in_solib_call_trampoline callback. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH parameter. (hppa64_push_dummy_call): Pass architecture to hppa64_convert_code_addr_to_fptr. (hppa_match_insns): Add GDBARCH parameter. (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to hppa_match_insns. (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to hppa_match_insns_relaxed. (hppa_stub_unwind_sniffer): Pass architecture to tdep->in_solib_call_trampoline callback. * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter. (hppa32_hpux_search_dummy_call_sequence): Pass architecture to hppa_hpux_search_pattern. * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter. (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter. Pass to insns_match_pattern. (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to hppa_linux_sigtramp_find_sigcontext. (hppa_linux_sigtramp_frame_sniffer): Likewise. (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter. (hppa64_hpux_in_solib_call_trampoline): Likewise. * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter. (i386_analyze_frame_setup): Add GDBARCH parameter. (i386_analyze_prologue): Add GDBARCH parameter. Pass to i386_follow_jump and i386_analyze_frame_setup. (i386_skip_prologue): Pass architecture to i386_analyze_prologue and i386_follow_jump. (i386_frame_cache): Pass architecture to i386_analyze_prologue. (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass frame to i386_pe_skip_trampoline_code. * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to sigcontext_register_address callback. * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter. (ia64_find_unwind_table): Pass architecture to ia64_find_global_pointer. (find_extant_func_descr): Add GDBARCH parameter. (find_func_descr): Pass architecture to find_extant_func_descr and ia64_find_global_pointer. (ia64_sigtramp_frame_init_saved_regs): Pass architecture to tdep->sigcontext_register_address callback. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add GDBARCH parameter. * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter. (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue. * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter. (lm32_skip_prologue, lm32_frame_cache): Pass architecture to lm32_analyze_prologue. * m32r-tdep.c (decode_prologue): Add GDBARCH parameter. (m32r_skip_prologue): Pass architecture to decode_prologue. * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter. (m68hc11_scan_prologue): Pass architecture to m68hc11_analyze_instruction. * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter. (m68k_analyze_prologue): Pass architecture to m68k_analyze_frame_setup. * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter. (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order to m88k_fetch_instruction. (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue. (m88k_frame_cache): Likewise. * mep-tdep.c (mep_get_insn): Add GDBARCH parameter. (mep_analyze_prologue): Pass architecture to mep_get_insn. * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter. (mips32_next_pc): Pass architecture to mips_fetch_instruction. (deal_with_atomic_sequence): Likewise. (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction. (mips16_scan_prologue): Likewise. (mips32_scan_prologue): Likewise. (mips16_in_function_epilogue_p): Likewise. (mips32_in_function_epilogue_p): Likewise. (mips_about_to_return): Likewise. (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue. (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue. (mips_skip_prologue): Pass architecture to mips16_scan_prologue and mips32_scan_prologue. (mips_in_function_epilogue_p): Pass architecture to mips16_in_function_epilogue_p and mips32_in_function_epilogue_p. (heuristic_proc_start): Pass architecture to mips_fetch_instruction and mips_about_to_return. (mips_skip_mips16_trampoline_code): Pass architecture to mips_fetch_instruction. (fetch_mips_16): Add GDBARCH parameter. (mips16_next_pc): Pass architecture to fetch_mips_16. (extended_mips16_next_pc): Pass architecture to unpack_mips16 and fetch_mips_16. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class): Add GDBARCH parameter. (find_implementation_from_class): Add GDBARCH parameter, pass to read_objc_class, read_objc_methlist_nmethods, and read_objc_methlist_method. (find_implementation): Add GDBARCH parameter, pass to read_objc_object and find_implementation_from_class. (resolve_msgsend, resolve_msgsend_stret): Pass architecture to find_implementation. (resolve_msgsend_super, resolve_msgsend_super_stret): Pass architecture to read_objc_super and find_implementation_from_class. * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter. (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target, ppc64_standard_linkage3_target): Pass architecture to ppc64_desc_entry_point. * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter. (skip_prologue): Pass byte order to bl_to_blrl_insn_p. (rs6000_fetch_instruction): Add GDBARCH parameter. (rs6000_skip_stack_check): Add GDBARCH parameter, pass to rs6000_fetch_instruction. (skip_prologue): Pass architecture to rs6000_fetch_instruction. * remote-mips.c (mips_store_word): Return old_contents as host integer value instead of target bytes. * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member. (s390_analyze_prologue): Initialize it. (extend_simple_arg): Add GDBARCH parameter. (s390_push_dummy_call): Pass architecture to extend_simple_arg. * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter. * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter. (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field. * scm-valprint.c (scm_scmval_print): Likewise. (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define SCM_BYTE_ORDER. * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter. (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to look_for_args_moves. (sh64_skip_prologue): Pass architecture to sh64_skip_prologue_hard_way. * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter. (sh_skip_prologue): Pass architecture to sh_analyze_prologue. (sh_frame_cache): Likewise. * solib-irix.c (extract_mips_address): Add GDBARCH parameter. (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Pass architecture to extract_mips_address. * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter. * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter. (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture to sparc_fetch_wcookie. (sparc32_frame_prev_register): Likewise. * sparc64-tdep.c (sparc64_frame_prev_register): Likewise. * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter. (spu_skip_prologue): Pass architecture to spu_analyze_prologue. (spu_virtual_frame_pointer): Likewise. (spu_frame_unwind_cache): Likewise. (info_spu_mailbox_list): Add BYTE_ORER parameter. (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list. (info_spu_dma_cmdlist): Add BYTE_ORER parameter. (info_spu_dma_command, info_spu_proxydma_command): Pass byte order to info_spu_dma_cmdlist. * symfile.c (read_target_long_array): Add GDBARCH parameter. (simple_read_overlay_table, simple_read_overlay_region_table, simple_overlay_update_1): Pass architecture to read_target_long_array. * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter. (v850_frame_cache): Pass architecture to v850_analyze_prologue. * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH parameter. (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture to xstormy16_analyze_prologue. (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter. (xstormy16_find_jmp_table_entry): Likewise. (xstormy16_skip_trampoline_code): Pass architecture to xstormy16_resolve_jmp_table_entry. (xstormy16_pointer_to_address): Likewise. (xstormy16_address_to_pointer): Pass architecture to xstormy16_find_jmp_table_entry. * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter. (call0_analyze_prologue): Add GDBARCH parameter, pass to call0_track_op. (call0_frame_cache): Pass architecture to call0_analyze_prologue. (xtensa_skip_prologue): Likewise.
2009-07-02 19:25:59 +02:00
extract_unsigned_integer (buf + 8, 4, byte_order);
module_name = buf + 12;
if (module_name - buf + module_name_size > bfd_get_section_size (sect))
goto out;
/* The first module is the .exe itself. */
if (data->module_count != 0)
* defs.h (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter. * utils.c (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter, use it instead of current_gdbarch. * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter. * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter, use it instead of current_gdbarch. Update calls to ui_out_field_core_addr to pass architecture: * ada-lang.c (print_one_exception): Update. * breakpoint.c (print_one_breakpoint_location, print_one_exception_catchpoint): Update. * disasm.c (dump_insns): Update. * darwin-nat-info.c (darwin_debug_regions_recurse): Update. * mi/mi-main.c (mi_cmd_data_read_memory): Update. * mi/mi-symbol-cmds.c: Include "objfiles.h". (mi_cmd_symbol_list_lines): Update. * stack.c (print_frame_info, print_frame): Update. Update callers of paddress to pass architecture: * ada-tasks.c (info_task): Update. * ada-valprint.c (ada_val_print_1): Update. * annotate.c (annotate_source, annotate_frame_begin): Update. * breakpoint.c (insert_bp_location, describe_other_breakpoints, mention): Update. * cli/cli-cmds.c (edit_command, list_command, print_disassembly): Update. * corefile.c (memory_error): Update. * c-valprint.c (print_function_pointer_address, c_val_print): Update. * disasm.c (dis_asm_print_address): Update. * exec.c (print_section_info): Update. * f-valprint.c (f_val_print): Update. * infcmd.c: Include "arch-utils.h". (jump_command, program_info): Update. * linux-fork.c: Include "arch-utils.h". (info_forks_command): Update. * m2-valprint.c (print_function_pointer_address, print_unpacked_pointer, print_variable_at_address, m2_val_print): Update. * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command): Update. * printcmd.c (print_address, print_address_demangle, address_info): Update. * p-valprint.c (pascal_val_print): Update. * source.c: Include "arch-utils.h". (line_info): Update. * stack.c (frame_info, print_block_frame_labels): Update. * symfile.c (add_symbol_file_command, list_overlays_command): Update. * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol, print_partial_symbols, maintenance_info_psymtabs, maintenance_check_symtabs): Update. * symtab.c (find_pc_sect_symtab): Update. * target.c (deprecated_debug_xfer_memory): Update. * tracepoint.c (scope_info): Update. * tui/tui-stack.c (tui_make_status_line): Update. * valprint.c (val_print_string): Update. Update callers of paddr_nz to use paddress instead (keeping user-visible output identical): * alpha-tdep.c (alpha_heuristic_proc_start): Update. * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn, amd64_displaced_step_fixup): Update. * arch-utils.c (simple_displaced_step_copy_insn): Update. * auxv.c (fprint_target_auxv): Update. * breakpoint.c (insert_single_step_breakpoint): Update. * buildsym.c (finish_block): Update. * cli/cli-dump.c (restore_section_callback): Update. * fbsd-nat.c (fbsd_find_memory_regions): Update. * frame.c (frame_unwind_register_value): Update. * gcore.c (gcore_create_callback): Update. * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm, i386_record_lea_modrm_addr, i386_record_lea_modrm, i386_process_record): Update. * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id, ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id, ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update. * infrun.c (displaced_step_prepare, displaced_step_fixup, handle_inferior_event, insert_step_resume_breakpoint_at_sal, insert_longjmp_resume_breakpoint): Update. * linux-nat.c (linux_nat_find_memory_regions): Update. * linux-record.c (record_linux_system_call): Update. * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call): Update. * monitor.c (monitor_error, monitor_remove_breakpoint): Update. * record.c (record_arch_list_add_mem, record_wait, record_xfer_partial): Update. * remote-mips.c (mips_fetch_word, mips_check_lsi_error, mips_common_breakpoint): Update. * remote-sim.c (gdbsim_xfer_inferior_memory): Update. * rs6000-tdep.c (ppc_displaced_step_fixup): Update. * solib-som.c (som_current_sos): Update. * symfile.c (load_progress, generic_load): Update. * symfile-mem.c (add_vsyscall_page): Update. * valops.c (value_fetch_lazy): Update. * windows-tdep.c (windows_xfer_shared_library): Update. Update callers of paddr_nz to use paddress instead (changing user-visible output to make it more correct): * dwarf2loc.c (locexpr_describe_location): Update. * ia64-tdep.c (ia64_memory_insert_breakpoint, ia64_memory_remove_breakpoint): Update. * jv-valprint.c (java_value_print): Update. * m32c-tdep.c (m32c_m16c_address_to_pointer): Update. * monitor.c (monitor_read_memory): Update. Update callers of paddr to use paddress instead (changing user-visible output to make it more correct): * arm-tdep.c (arm_push_dummy_call): Update. * breakpoint.c (insert_bp_location, create_thread_event_breakpoint, create_breakpoint): Update. * darwin-nat-info.c (darwin_debug_regions): Update. * dcache.c (dcache_info): Update. * dsrec.c (load_srec, make_srec): Update. * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program, dwarf2_frame_cache): Update. * gcore.c (gcore_copy_callback): Update. * gnu-nat.c (gnu_xfer_memory): Update. * mips-linux-nat.c (mips_show_dr): Update. * monitor.c (monitor_write_memory, monitor_insert_breakpoint, monitor_remove_breakpoint): Update. * remote.c (compare_sections_command): Update. * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint, m32r_remove_breakpoint, m32r_insert_watchpoint, m32r_remove_watchpoint): Update. * sol-thread.c (info_cb): Update. * symfile.c (load_progress): Update. Update callers of paddress or paddr_nz to use hex_string instead (changes output of internal/error/debug messages only): * dwarf2read.c (dump_die_shallow): Update. * frame.c (fprint_field, fprint_frame, frame_pc_unwind, get_frame_func, create_new_frame): Update. * hppa-tdep.c (find_unwind_entry, unwind_command): Update. * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x, ia64_get_dyn_info_list): Update. * maint.c (maintenance_translate_address): Update. * mi/mi-cmd-var.c (mi_cmd_var_create): Update. * target.c (target_flash_erase): Update. Update callers of paddr/paddr_nz to use phex/phex_nz instead, using an appropriate address size. Remove use of strlen_paddr. * exec.c (exec_files_info): Update. * i386-nat.c (i386_show_dr): Update. * remote.c (remote_flash_erase): Update. * m32r-rom.c (m32r_load_section): Update. * monitor.c (monitor_vsprintf, monitor_store_register): Update. * remote.c (remote_check_symbols, remote_search_memory): Update. * remote-mips.c (mips_request, mips_common_breakpoint): Update. * scm-valprint.c (scm_ipruk, scm_scmval_print): Update. * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update. * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs, sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs): Update. * xcoffsolib.c (sharedlibrary_command): Update. * maint.c (maint_print_section_info): Add ADDR_SIZE parameter. Use hex_string_custom instead of paddr. (print_bfd_section_info): Pass address size. (print_objfile_section_info): Likewise. * annotate.h (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * annotate.c (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * source.c (identify_source_line): Update call to annotate_source. * stack.c (print_frame_info, print_frame): Update call to annotate_frame_begin. * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter. (create_breakpoint, create_ada_exception_breakpoint): Update call. * stack.c (print_block_frame_labels): Add GDBARCH parameter. (print_frame_label_vars): Update call. * symmisc.c (print_partial_symbols): Add GDBARCH parameter. (dump_psymtab): Update call to print_partial_symbols. (struct print_symbol_args): Add GDBARCH member. (dump_symtab_1): Set print_symbol_args architecture member. (print_symbol): Use it. * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH parameter. * windows-tdep.c (windows_xfer_shared_library): Likewise. * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member. (core_process_module_section): Pass architecture from cpms_data to windows_xfer_shared_library. (windows_core_xfer_shared_libraries): Initialize cmps_data architecture member. * windows-nat.c (windows_xfer_shared_libraries): Pass architecture to windows_xfer_shared_library. * defs.h (print_address): Add GDBARCH parameter. * printcmd.c (print_address): Add GDBARCH parameter. (print_scalar_formatted, do_examine): Update call. * findcmd.c (find_command): Update call. * tracepoint.c: Include "arch-utils.h". (trace_find_line_command): Update call. * tui/tui-disasm.c (tui_disassemble): Update call. * value.h (print_address_demangle): Add GDBARCH parameter. * printcmd.c (print_address_demangle): Add GDBARCH parameter. * c-valprint.c (print_function_pointer_address, c_val_print): Update call. * f-valprint.c (f_val_print): Update call. * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call. * jv-valprint.c (java_val_print): Update call. * m2-valprint.c (print_function_pointer_address, m2_val_print): Update call. * p-valprint.c (pascal_val_print): Update call. * disasm.c (gdb_disassemble_info): Install architecture into di.application_data field. testsuite/ChangeLog: * gdb.threads/tls-shared.exp: Update to locexpr_describe_location change to prefix TLS offset in hex with 0x. doc/ChangeLog: * gdbint.texinfo (Item Output Functions): Update signature for ui_out_field_core_addr.
2009-07-02 19:21:10 +02:00
windows_xfer_shared_library (module_name, base_addr,
data->gdbarch, data->obstack);
data->module_count++;
out:
if (buf)
xfree (buf);
return;
}
static LONGEST
windows_core_xfer_shared_libraries (struct gdbarch *gdbarch,
gdb_byte *readbuf,
ULONGEST offset, LONGEST len)
{
struct obstack obstack;
const char *buf;
LONGEST len_avail;
* defs.h (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter. * utils.c (strlen_paddr, paddr, paddr_nz): Remove. (paddress): Add GDBARCH parameter, use it instead of current_gdbarch. * ui-out.h (ui_out_field_core_addr): Add GDBARCH parameter. * ui-out.c (ui_out_field_core_addr): Add GDBARCH parameter, use it instead of current_gdbarch. Update calls to ui_out_field_core_addr to pass architecture: * ada-lang.c (print_one_exception): Update. * breakpoint.c (print_one_breakpoint_location, print_one_exception_catchpoint): Update. * disasm.c (dump_insns): Update. * darwin-nat-info.c (darwin_debug_regions_recurse): Update. * mi/mi-main.c (mi_cmd_data_read_memory): Update. * mi/mi-symbol-cmds.c: Include "objfiles.h". (mi_cmd_symbol_list_lines): Update. * stack.c (print_frame_info, print_frame): Update. Update callers of paddress to pass architecture: * ada-tasks.c (info_task): Update. * ada-valprint.c (ada_val_print_1): Update. * annotate.c (annotate_source, annotate_frame_begin): Update. * breakpoint.c (insert_bp_location, describe_other_breakpoints, mention): Update. * cli/cli-cmds.c (edit_command, list_command, print_disassembly): Update. * corefile.c (memory_error): Update. * c-valprint.c (print_function_pointer_address, c_val_print): Update. * disasm.c (dis_asm_print_address): Update. * exec.c (print_section_info): Update. * f-valprint.c (f_val_print): Update. * infcmd.c: Include "arch-utils.h". (jump_command, program_info): Update. * linux-fork.c: Include "arch-utils.h". (info_forks_command): Update. * m2-valprint.c (print_function_pointer_address, print_unpacked_pointer, print_variable_at_address, m2_val_print): Update. * m32r-rom.c (m32r_load_section, m32r_load, m32r_upload_command): Update. * printcmd.c (print_address, print_address_demangle, address_info): Update. * p-valprint.c (pascal_val_print): Update. * source.c: Include "arch-utils.h". (line_info): Update. * stack.c (frame_info, print_block_frame_labels): Update. * symfile.c (add_symbol_file_command, list_overlays_command): Update. * symmisc.c (dump_msymbols, dump_psymtab, dump_symtab_1, print_symbol, print_partial_symbols, maintenance_info_psymtabs, maintenance_check_symtabs): Update. * symtab.c (find_pc_sect_symtab): Update. * target.c (deprecated_debug_xfer_memory): Update. * tracepoint.c (scope_info): Update. * tui/tui-stack.c (tui_make_status_line): Update. * valprint.c (val_print_string): Update. Update callers of paddr_nz to use paddress instead (keeping user-visible output identical): * alpha-tdep.c (alpha_heuristic_proc_start): Update. * amd64-tdep.c (fixup_riprel, amd64_displaced_step_copy_insn, amd64_displaced_step_fixup): Update. * arch-utils.c (simple_displaced_step_copy_insn): Update. * auxv.c (fprint_target_auxv): Update. * breakpoint.c (insert_single_step_breakpoint): Update. * buildsym.c (finish_block): Update. * cli/cli-dump.c (restore_section_callback): Update. * fbsd-nat.c (fbsd_find_memory_regions): Update. * frame.c (frame_unwind_register_value): Update. * gcore.c (gcore_create_callback): Update. * hppa-tdep.c (hppa_frame_cache, hppa_skip_trampoline_code): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_record_modrm, i386_record_lea_modrm_addr, i386_record_lea_modrm, i386_process_record): Update. * ia64-tdep.c (ia64_frame_this_id, ia64_sigtramp_frame_this_id, ia64_libunwind_frame_this_id, ia64_libunwind_sigtramp_frame_this_id, ia64_dummy_id, ia64_access_reg, ia64_access_rse_reg): Update. * infrun.c (displaced_step_prepare, displaced_step_fixup, handle_inferior_event, insert_step_resume_breakpoint_at_sal, insert_longjmp_resume_breakpoint): Update. * linux-nat.c (linux_nat_find_memory_regions): Update. * linux-record.c (record_linux_system_call): Update. * mips-tdep.c (heuristic_proc_start, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call): Update. * monitor.c (monitor_error, monitor_remove_breakpoint): Update. * record.c (record_arch_list_add_mem, record_wait, record_xfer_partial): Update. * remote-mips.c (mips_fetch_word, mips_check_lsi_error, mips_common_breakpoint): Update. * remote-sim.c (gdbsim_xfer_inferior_memory): Update. * rs6000-tdep.c (ppc_displaced_step_fixup): Update. * solib-som.c (som_current_sos): Update. * symfile.c (load_progress, generic_load): Update. * symfile-mem.c (add_vsyscall_page): Update. * valops.c (value_fetch_lazy): Update. * windows-tdep.c (windows_xfer_shared_library): Update. Update callers of paddr_nz to use paddress instead (changing user-visible output to make it more correct): * dwarf2loc.c (locexpr_describe_location): Update. * ia64-tdep.c (ia64_memory_insert_breakpoint, ia64_memory_remove_breakpoint): Update. * jv-valprint.c (java_value_print): Update. * m32c-tdep.c (m32c_m16c_address_to_pointer): Update. * monitor.c (monitor_read_memory): Update. Update callers of paddr to use paddress instead (changing user-visible output to make it more correct): * arm-tdep.c (arm_push_dummy_call): Update. * breakpoint.c (insert_bp_location, create_thread_event_breakpoint, create_breakpoint): Update. * darwin-nat-info.c (darwin_debug_regions): Update. * dcache.c (dcache_info): Update. * dsrec.c (load_srec, make_srec): Update. * dwarf2-frame.c (dwarf2_restore_rule, execute_cfa_program, dwarf2_frame_cache): Update. * gcore.c (gcore_copy_callback): Update. * gnu-nat.c (gnu_xfer_memory): Update. * mips-linux-nat.c (mips_show_dr): Update. * monitor.c (monitor_write_memory, monitor_insert_breakpoint, monitor_remove_breakpoint): Update. * remote.c (compare_sections_command): Update. * remote-m32r-sdi.c (m32r_xfer_memory, m32r_insert_breakpoint, m32r_remove_breakpoint, m32r_insert_watchpoint, m32r_remove_watchpoint): Update. * sol-thread.c (info_cb): Update. * symfile.c (load_progress): Update. Update callers of paddress or paddr_nz to use hex_string instead (changes output of internal/error/debug messages only): * dwarf2read.c (dump_die_shallow): Update. * frame.c (fprint_field, fprint_frame, frame_pc_unwind, get_frame_func, create_new_frame): Update. * hppa-tdep.c (find_unwind_entry, unwind_command): Update. * ia64-tdep.c (get_kernel_table, ia64_find_proc_info_x, ia64_get_dyn_info_list): Update. * maint.c (maintenance_translate_address): Update. * mi/mi-cmd-var.c (mi_cmd_var_create): Update. * target.c (target_flash_erase): Update. Update callers of paddr/paddr_nz to use phex/phex_nz instead, using an appropriate address size. Remove use of strlen_paddr. * exec.c (exec_files_info): Update. * i386-nat.c (i386_show_dr): Update. * remote.c (remote_flash_erase): Update. * m32r-rom.c (m32r_load_section): Update. * monitor.c (monitor_vsprintf, monitor_store_register): Update. * remote.c (remote_check_symbols, remote_search_memory): Update. * remote-mips.c (mips_request, mips_common_breakpoint): Update. * scm-valprint.c (scm_ipruk, scm_scmval_print): Update. * sh64-tdep.c (sh64_show_media_regs, sh64_show_compact_regs): Update. * sh-tdep.c (sh_generic_show_regs, sh3_show_regs, sh2e_show_regs, sh2a_show_regs, sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs): Update. * xcoffsolib.c (sharedlibrary_command): Update. * maint.c (maint_print_section_info): Add ADDR_SIZE parameter. Use hex_string_custom instead of paddr. (print_bfd_section_info): Pass address size. (print_objfile_section_info): Likewise. * annotate.h (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * annotate.c (annotate_source): Add GDBARCH parameter. (annotate_frame_begin): Likewise. * source.c (identify_source_line): Update call to annotate_source. * stack.c (print_frame_info, print_frame): Update call to annotate_frame_begin. * breakpoint.c (describe_other_breakpoints): Add GDBARCH parameter. (create_breakpoint, create_ada_exception_breakpoint): Update call. * stack.c (print_block_frame_labels): Add GDBARCH parameter. (print_frame_label_vars): Update call. * symmisc.c (print_partial_symbols): Add GDBARCH parameter. (dump_psymtab): Update call to print_partial_symbols. (struct print_symbol_args): Add GDBARCH member. (dump_symtab_1): Set print_symbol_args architecture member. (print_symbol): Use it. * windows-tdep.h (windows_xfer_shared_library): Add GDBARCH parameter. * windows-tdep.c (windows_xfer_shared_library): Likewise. * i386-cygwin-tdep.c (struct cpms_data): Add GDBARCH member. (core_process_module_section): Pass architecture from cpms_data to windows_xfer_shared_library. (windows_core_xfer_shared_libraries): Initialize cmps_data architecture member. * windows-nat.c (windows_xfer_shared_libraries): Pass architecture to windows_xfer_shared_library. * defs.h (print_address): Add GDBARCH parameter. * printcmd.c (print_address): Add GDBARCH parameter. (print_scalar_formatted, do_examine): Update call. * findcmd.c (find_command): Update call. * tracepoint.c: Include "arch-utils.h". (trace_find_line_command): Update call. * tui/tui-disasm.c (tui_disassemble): Update call. * value.h (print_address_demangle): Add GDBARCH parameter. * printcmd.c (print_address_demangle): Add GDBARCH parameter. * c-valprint.c (print_function_pointer_address, c_val_print): Update call. * f-valprint.c (f_val_print): Update call. * gnu-v3-abi.c (gnuv3_print_method_ptr): Update call. * jv-valprint.c (java_val_print): Update call. * m2-valprint.c (print_function_pointer_address, m2_val_print): Update call. * p-valprint.c (pascal_val_print): Update call. * disasm.c (gdb_disassemble_info): Install architecture into di.application_data field. testsuite/ChangeLog: * gdb.threads/tls-shared.exp: Update to locexpr_describe_location change to prefix TLS offset in hex with 0x. doc/ChangeLog: * gdbint.texinfo (Item Output Functions): Update signature for ui_out_field_core_addr.
2009-07-02 19:21:10 +02:00
struct cpms_data data = { gdbarch, &obstack, 0 };
obstack_init (&obstack);
obstack_grow_str (&obstack, "<library-list>\n");
bfd_map_over_sections (core_bfd,
core_process_module_section,
&data);
obstack_grow_str0 (&obstack, "</library-list>\n");
buf = obstack_finish (&obstack);
len_avail = strlen (buf);
if (offset >= len_avail)
return 0;
if (len > len_avail - offset)
len = len_avail - offset;
memcpy (readbuf, buf + offset, len);
obstack_free (&obstack, NULL);
return len;
}
* corelow.c (core_pid_to_str): Default to using normal_pid_to_str instead of printing "Thread" here. * linux-tdep.c: Include inferior.h. (linux_core_pid_to_str): New. (linux_init_abi): New. * linux-tdep.h (linux_init_abi): Declare. * alpha-linux-tdep.c: Include linux-tdep.h. (alpha_linux_init_abi): Call linux_init_abi. * amd64-linux-tdep.c (amd64_linux_init_abi): Call linux_init_abi. * arm-linux-tdep.c (arm_linux_init_abi): Call linux_init_abi. * frv-linux-tdep.c: Include linux-tdep.h (frv_linux_init_abi): Call linux_init_abi. * hppa-linux-tdep.c: Include linux-tdep.h (hppa_linux_init_abi): Call linux_init_abi. * i386-linux-tdep.c (i386_linux_init_abi): Call linux_init_abi. * ia64-linux-tdep.c: Include linux-tdep.h. (ia64_linux_init_abi): Call linux_init_abi. * m32r-linux-tdep.c: Include linux-tdep.h. (m32r_linux_init_abi): Call linux_init_abi. * m68klinux-tdep.c: Include linux-tdep.h. (m68k_linux_init_abi): Call linux_init_abi. * microblaze-linux-tdep.c: Include linux-tdep.h. (microblaze_linux_init_abi): Call linux_init_abi. * mips-linux-tdep.c: Include linux-tdep.h. (mips_linux_init_abi): Call linux_init_abi. * mn10300-linux-tdep.c: Include linux-tdep.h. (am33_linux_init_osabi): Call linux_init_abi. Rename the 'gdbinfo' parameter to 'info'. * ppc-linux-tdep.c: Include linux-tdep.h. (ppc_linux_init_abi): Call linux_init_abi. * sh-linux-tdep.c: Include linux-tdep.h. (sh_linux_init_abi): Call linux_init_abi. * sparc-linux-tdep.c: Include linux-tdep.h. (sparc32_linux_init_abi): Call linux_init_abi. * sparc64-linux-tdep.c: Include linux-tdep.h. (sparc64_linux_init_abi): Call linux_init_abi. * xtensa-linux-tdep.c: Include linux-tdep.h. (xtensa_linux_init_abi): Call linux_init_abi. * i386-cygwin-tdep.c (i386_windows_core_pid_to_str): New. (i386_cygwin_init_abi): Install it as gdbarch_core_pid_to_str callback.
2010-08-04 17:27:57 +02:00
/* This is how we want PTIDs from core files to be printed. */
static char *
i386_windows_core_pid_to_str (struct gdbarch *gdbarch, ptid_t ptid)
{
static char buf[80];
if (ptid_get_lwp (ptid) != 0)
{
snprintf (buf, sizeof (buf), "Thread 0x%lx", ptid_get_lwp (ptid));
return buf;
}
return normal_pid_to_str (ptid);
}
static CORE_ADDR
* gdbarch.sh (skip_trampoline_code): Add FRAME argument. * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.c (generic_skip_trampoline_code): Add FRAME argument. * arch-utils.h (generic_skip_trampoline_code): Likewise. * infrun.c (handle_inferior_event): Pass current frame to gdbarch_skip_trampoline_code and skip_language_trampoline. * language.c (unk_lang_trampoline): Add FRAME argument. (skip_language_trampoline): Add FRAME argument. Pass it to skip_trampoline callback. * language.h: Add forward declaration of struct frame_info. (struct language_defn): Add FRAME argument to skip_trampoline. (skip_language_trampoline): Add FRAME argument. * cp-abi.c (cplus_skip_trampoline): Add FRAME argument. Pass it to skip_trampoline callback. * cp-abi.h: Add forward declaration of struct frame_info. (cplus_skip_trampoline): Add FRAME argument. (struct cp_abi_ops): Add FRAME argument to skip_trampoline callback. * gnu-v3-abi.c (gnuv3_skip_trampoline): Add FRAME argument. Pass it to gdbarch_skip_trampoline_code. * objc-lang.c (objc_skip_trampoline): Add FRAME argument. Pass it to gdbarch_skip_trampoline_code. * minsyms.c (find_solib_trampoline_target): Add FRAME argument. * symtab.h (find_solib_trampoline_target): Likewise. * obsd-tdep.c (obsd_skip_solib_resolver): Pass current frame to find_solib_trampoline_target. * arm-tdep.c (arm_skip_stub): Add FRAME argument. Read registers from FRAME instead of calling read_register. * hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code): Add FRAME argument. Read registers from FRAME instead of using read_register. * hppa-tdep.c (hppa_skip_trampoline_code): Likewise. * hppa-tdep.h (hppa_skip_trampoline_code): Add FRAME argument. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Add FRAME argument. * m32c-tdep.c (m32c_skip_trampoline_code): Add FRAME argument. * mips-tdep.c (mips_skip_trampoline_code): Add FRAME argument. Read registers from FRAME instead of using read_signed_register. * ppc-linux-tdep.c (ppc_linux_skip_trampoline_code): Add FRAME argument. (ppc64_standard_linkage_target): Likewise. Read registers from FRAME instead of using read_register. (ppc64_skip_trampoline_code): Add FRAME argument. Pass it to ppc64_standard_linkage_target. * rs6000-tdep.c (rs6000_skip_trampoline_code): Add FRAME argument. Pass it to find_solib_trampoline_target. Read registers from FRAME instead of using read_register. * xstormy16-tdep.c (xstormy16_skip_trampoline_code): Add FRAME argument.
2007-06-16 00:39:52 +02:00
i386_cygwin_skip_trampoline_code (struct frame_info *frame, CORE_ADDR pc)
{
* defs.h (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * gdbcore.h (read_memory_integer, safe_read_memory_integer, read_memory_unsigned_integer, write_memory_signed_integer, write_memory_unsigned_integer): Add BYTE_ORDER parameter. * corefile.c (struct captured_read_memory_integer_arguments): Add BYTE_ORDER member. (safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into struct captured_read_memory_integer_arguments. (do_captured_read_memory_integer): Pass it to read_memory_integer. (read_memory_integer): Add BYTE_ORDER parameter. Pass it to extract_signed_integer. (read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. (write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it to store_signed_integer. (write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to store_unsigned_integer. * target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter. * target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter. Pass it to extract_unsigned_integer. Update calls to extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer, store_signed_integer, store_unsigned_integer, read_memory_integer, read_memory_unsigned_integer, safe_read_memory_integer, write_memory_signed_integer, write_memory_unsigned_integer, and get_target_memory_unsigned to pass byte order: * ada-lang.c (ada_value_binop): Update. * ada-valprint.c (char_at): Update. * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update. * alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call, alpha_extract_return_value, alpha_read_insn, alpha_get_longjmp_target): Update. * amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update. * amd64obsd-tdep.c (amd64obsd_supply_uthread, amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update. * amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue, amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel, amd64_displaced_step_fixup): Update. * arm-linux-tdep.c (arm_linux_sigreturn_init, arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update. * arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value, arm_store_return_value, arm_return_value): Update. * arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update. * auxv.c (default_auxv_parse): Update. * avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address, avr_scan_prologue, avr_extract_return_value, avr_frame_prev_register, avr_push_dummy_call): Update. * bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset, bsd_uthread_wait, bsd_uthread_thread_alive, bsd_uthread_extra_thread_info): Update. * c-lang.c (c_printstr, print_wchar): Update. * cp-valprint.c (cp_print_class_member): Update. * cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache, cris_push_dummy_call, cris_scan_prologue, cris_store_return_value, cris_extract_return_value, find_step_target, dip_prefix, sixteen_bit_offset_branch_op, none_reg_mode_jump_op, move_mem_to_reg_movem_op, get_data_from_address): Update. * dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update. * dwarf2-frame.c (execute_cfa_program): Update. * dwarf2loc.c (find_location_expression): Update. * dwarf2read.c (dwarf2_const_value): Update. * expprint.c (print_subexp_standard): Update. * findvar.c (unsigned_pointer_to_address, signed_pointer_to_address, unsigned_address_to_pointer, address_to_signed_pointer, read_var_value): Update. * frame.c (frame_unwind_register_signed, frame_unwind_register_unsigned, get_frame_memory_signed, get_frame_memory_unsigned): Update. * frame-unwind.c (frame_unwind_got_constant): Update. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp, frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache): Update. * frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue, frv_extract_return_value, find_func_descr, frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update. * f-valprint.c (f_val_print): Update. * gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr): Update. * h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue, h8300_push_dummy_call, h8300_extract_return_value, h8300h_extract_return_value, h8300_store_return_value, h8300h_store_return_value): Update. * hppabsd-tdep.c (hppabsd_find_global_pointer): Update. * hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register): Update. * hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline, hppa64_hpux_in_solib_call_trampoline, hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code, hppa_hpux_sigtramp_frame_unwind_cache, hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer, hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern, hppa32_hpux_search_dummy_call_sequence, hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state, hppa_hpux_unwind_adjust_stub): Update. * hppa-linux-tdep.c (insns_match_pattern, hppa_linux_find_global_pointer): Update. * hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call, hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call, skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache, hppa_pseudo_register_read, hppa_frame_prev_register_helper, hppa_match_insns): Update. * hpux-thread.c (hpux_thread_fetch_registers): Update. * i386-tdep.c (i386bsd_sigcontext_addr): Update. * i386-cygwin-tdep.c (core_process_module_section): Update. * i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn, amd64_darwin_sstep_at_sigreturn): Update. * i386-darwin-tdep.c (i386_darwin_sigcontext_addr, amd64_darwin_sigcontext_addr): Likewise. * i386-linux-nat.c (i386_linux_sigcontext_addr): Update. * i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update. * i386-nto-tdep.c (i386nto_sigcontext_addr): Update. * i386obsd-nat.c (i386obsd_supply_pcb): Update. * i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread, i386obsd_trapframe_cache): Update. * i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump, i386_analyze_frame_setup, i386_analyze_prologue, i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache, i386_get_longjmp_target, i386_push_dummy_call, i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr, i386_fetch_pointer_argument): Update. * i387-tdep.c (i387_supply_fsave): Update. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update. * ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write, examine_prologue, ia64_frame_cache, ia64_frame_prev_register, ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register, ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id, ia64_libunwind_frame_prev_register, ia64_libunwind_sigtramp_frame_this_id, ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer, find_extant_func_descr, find_func_descr, ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id, ia64_unwind_pc): Update. * iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer, iq2000_scan_prologue, iq2000_extract_return_value, iq2000_push_dummy_call): Update. * irix5nat.c (fill_gregset): Update. * jv-lang.c (evaluate_subexp_java): Update. * jv-valprint.c (java_value_print): Update. * lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call, lm32_extract_return_value, lm32_store_return_value): Update. * m32c-tdep.c (m32c_push_dummy_call, m32c_return_value, m32c_skip_trampoline_code, m32c_m16c_address_to_pointer, m32c_m16c_pointer_to_address): Update. * m32r-tdep.c (m32r_store_return_value, decode_prologue, m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value): Update. * m68hc11-tdep.c (m68hc11_pseudo_register_read, m68hc11_pseudo_register_write, m68hc11_analyze_instruction, m68hc11_push_dummy_call): Update. * m68linux-tdep.c (m68k_linux_pc_in_sigtramp, m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache): Update. * m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup, m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache, m68k_get_longjmp_target): Update. * m88k-tdep.c (m88k_fetch_instruction): Update. * mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write, mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update. * mi/mi-main.c (mi_cmd_data_write_memory): Update. * mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg, mips64_linux_get_longjmp_target, mips64_fill_gregset, mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update. * mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update. * mips-tdep.c (mips_fetch_instruction, fetch_mips_16, mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call, mips_o32_push_dummy_call, mips_o64_push_dummy_call, mips_single_step_through_delay, mips_skip_pic_trampoline_code, mips_integer_to_address): Update. * mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call): Update. * monitor.c (monitor_supply_register, monitor_write_memory, monitor_read_memory_single): Update. * moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value, moxie_analyze_prologue): Update. * mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor, mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info, mt_push_dummy_call): Update. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class, find_implementation_from_class): Update. * ppc64-linux-tdep.c (ppc64_desc_entry_point, ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache): Update. * ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer, ppcobsd_sigtramp_frame_cache): Update. * ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call, do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call, ppc64_sysv_abi_return_value): Update. * ppc-linux-nat.c (ppc_linux_auxv_parse): Update. * procfs.c (procfs_auxv_parse): Update. * p-valprint.c (pascal_val_print): Update. * regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned, regcache_raw_write_signed, regcache_raw_write_unsigned, regcache_cooked_read_signed, regcache_cooked_read_unsigned, regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update. * remote-m32r-sdi.c (m32r_fetch_register): Update. * remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory): Update. * rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value, rs6000_convert_from_func_ptr_addr, branch_dest, rs6000_software_single_step): Update. * rs6000-tdep.c (rs6000_in_function_epilogue_p, ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence, bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue, rs6000_skip_main_prologue, rs6000_skip_trampoline_code, rs6000_frame_cache): Update. * s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write, s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load, s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache, extend_simple_arg, s390_push_dummy_call, s390_return_value): Update. * scm-exp.c (scm_lreadr): Update. * scm-lang.c (scm_get_field, scm_unpack): Update. * scm-valprint.c (scm_val_print): Update. * score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call, score_fetch_inst): Update. * sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way, sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value, sh64_pseudo_register_read, sh64_pseudo_register_write, sh64_frame_prev_register): Update: * sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu, sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update. * solib-darwin.c (darwin_load_image_infos): Update. * solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2, find_canonical_descriptor_in_load_object): Update. * solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Update. * solib-som.c (som_solib_create_inferior_hook, link_map_start, som_current_sos, som_open_symbol_file_object): Update. * solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME): Update. * solib-svr4.c (read_program_header, scan_dyntag_auxv, solib_svr4_r_ldsomap): Update. * sparc64-linux-tdep.c (sparc64_linux_step_trap): Update. * sparc64obsd-tdep.c (sparc64obsd_supply_uthread, sparc64obsd_collect_uthread): Update. * sparc64-tdep.c (sparc64_pseudo_register_read, sparc64_pseudo_register_write, sparc64_supply_gregset, sparc64_collect_gregset): Update. * sparc-linux-tdep.c (sparc32_linux_step_trap): Update. * sparcobsd-tdep.c (sparc32obsd_supply_uthread, sparc32obsd_collect_uthread): Update. * sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code, sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow, sparc_collect_rwindow): Update. * spu-linux-nat.c (parse_spufs_run): Update. * spu-tdep.c (spu_pseudo_register_read_spu, spu_pseudo_register_write_spu, spu_pointer_to_address, spu_analyze_prologue, spu_in_function_epilogue_p, spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step, spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect, info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist, info_spu_dma_command, info_spu_proxydma_command): Update. * stack.c (print_frame_nameless_args, frame_info): Update. * symfile.c (read_target_long_array, simple_read_overlay_table, simple_read_overlay_region_table): Update. * target.c (debug_print_register): Update. * tramp-frame.c (tramp_frame_start): Update. * v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call, v850_extract_return_value, v850_store_return_value, * valarith.c (value_binop, value_bit_index): Update. * valops.c (value_cast): Update. * valprint.c (val_print_type_code_int, val_print_string, read_string): Update. * value.c (unpack_long, unpack_double, unpack_field_as_long, modify_field, pack_long): Update. * vax-tdep.c (vax_store_arguments, vax_push_dummy_call, vax_skip_prologue): Update. * xstormy16-tdep.c (xstormy16_push_dummy_call, xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p, xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry, xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update. * xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read, xtensa_pseudo_register_write, xtensa_frame_cache, xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update. * dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. * dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. (decimal_to_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter. Pass it to match_endianness. (decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT parameters. Pass them to match_endianness. (decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters. Pass them to match_endianness. (decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters. Pass them to match_endianness. * valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and BYTE_ORDER_Y output parameters. (value_binop): Update call to value_args_as_decimal. Update calls to decimal_to_string, decimal_from_string, decimal_from_integral, decimal_from_floating, decimal_to_doublest, decimal_is_zero, decimal_binop, decimal_compare and decimal_convert to pass/receive byte order: * c-exp.y (parse_number): Update. * printcmd.c (printf_command): Update. * valarith.c (value_args_as_decimal, value_binop, value_logical_not, value_equal, value_less): Update. * valops.c (value_cast, value_one): Update. * valprint.c (print_decimal_floating): Update. * value.c (unpack_long, unpack_double): Update. * python/python-value.c (valpy_nonzero): Update. * ada-valprint.c (char_at): Add BYTE_ORDER parameter. (printstr): Update calls to char_at. (ada_val_print_array): Likewise. * valprint.c (read_string): Add BYTE_ORDER parameter. (val_print_string): Update call to read_string. * c-lang.c (c_get_string): Likewise. * charset.h (target_wide_charset): Add BYTE_ORDER parameter. * charset.c (target_wide_charset): Add BYTE_ORDER parameter. Use it instead of current_gdbarch. * printcmd.c (printf_command): Update calls to target_wide_charset. * c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter. Pass to target_wide_charset. Use it instead of current_gdbarch. (classify_type): Add BYTE_ORDER parameter. Pass to charset_for_string_type. Allow NULL encoding pointer. (print_wchar): Add BYTE_ORDER parameter. (c_emit_char): Update calls to classify_type and print_wchar. (c_printchar, c_printstr): Likewise. * gdbarch.sh (in_solib_return_trampoline): Convert to type "m". * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH parameter. * arch-utils.c (generic_in_solib_return_trampoline): Likewise. * hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise. * rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise. (rs6000_skip_trampoline_code): Update call. * alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to dynamic_sigtramp_offset and pc_in_sigtramp callbacks. (alpha_read_insn): Add GDBARCH parameter. * alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter. (alpha_register_to_value): Pass architecture to alpha_sts. (alpha_extract_return_value): Likewise. (alpha_value_to_register): Pass architecture to alpha_lds. (alpha_store_return_value): Likewise. (alpha_read_insn): Add GDBARCH parameter. (alpha_skip_prologue): Pass architecture to alpha_read_insn. (alpha_heuristic_proc_start): Likewise. (alpha_heuristic_frame_unwind_cache): Likewise. (alpha_next_pc): Likewise. (alpha_sigtramp_frame_this_id): Pass architecture to tdep->dynamic_sigtramp_offset callback. (alpha_sigtramp_frame_sniffer): Pass architecture to tdep->pc_in_sigtramp callback. * alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter. (alphafbsd_sigtramp_offset): Likewise. * alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH parameter. Pass to alpha_read_insn. (alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset_1. (alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_linux_sigtramp_offset. (alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn and alpha_linux_sigtramp_offset. * alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter. (alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alphanbsd_sigtramp_offset. * alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter. (alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to alpha_read_insn. (alphaobsd_sigcontext_addr): Pass architecture to alphaobsd_sigtramp_offset. * alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH parameter. * amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter. (amd64_skip_prologue): Pass architecture to amd64_analyze_prologue. (amd64_frame_cache): Likewise. * arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove. (thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue, thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros. * arm-wince-tdep.c: Include "frame.h". * avr-tdep.c (EXTRACT_INSN): Remove. (avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN. (avr_skip_prologue): Pass architecture to avr_scan_prologue. (avr_frame_unwind_cache): Likewise. * cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member. (find_step_target): Initialize it. (get_data_from_address): Add BYTE_ORDER parameter. (bdap_prefix): Pass byte order to get_data_from_address. (handle_prefix_assign_mode_for_aritm_op): Likewise. (three_operand_add_sub_cmp_and_or_op): Likewise. (handle_inc_and_index_mode_for_aritm_op): Likewise. * frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter. (frv_linux_sigcontext_reg_addr): Pass architecture to frv_linux_pc_in_sigtramp. (frv_linux_sigtramp_frame_sniffer): Likewise. * h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter. (h8300_analyze_prologue): Add GDBARCH parameter. Pass to h8300_is_argument_spill. (h8300_frame_cache, h8300_skip_prologue): Pass architecture to h8300_analyze_prologue. * hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to in_solib_call_trampoline callback. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. * hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH parameter. (hppa64_push_dummy_call): Pass architecture to hppa64_convert_code_addr_to_fptr. (hppa_match_insns): Add GDBARCH parameter. (hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to hppa_match_insns. (hppa_skip_trampoline_code): Pass architecture to hppa_match_insns. (hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to hppa_match_insns_relaxed. (hppa_stub_unwind_sniffer): Pass architecture to tdep->in_solib_call_trampoline callback. * hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter. (hppa32_hpux_search_dummy_call_sequence): Pass architecture to hppa_hpux_search_pattern. * hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter. (hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter. Pass to insns_match_pattern. (hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to hppa_linux_sigtramp_find_sigcontext. (hppa_linux_sigtramp_frame_sniffer): Likewise. (hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter. (hppa64_hpux_in_solib_call_trampoline): Likewise. * i386-tdep.c (i386_follow_jump): Add GDBARCH parameter. (i386_analyze_frame_setup): Add GDBARCH parameter. (i386_analyze_prologue): Add GDBARCH parameter. Pass to i386_follow_jump and i386_analyze_frame_setup. (i386_skip_prologue): Pass architecture to i386_analyze_prologue and i386_follow_jump. (i386_frame_cache): Pass architecture to i386_analyze_prologue. (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter. * i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass frame to i386_pe_skip_trampoline_code. * ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to sigcontext_register_address callback. * ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter. (ia64_find_unwind_table): Pass architecture to ia64_find_global_pointer. (find_extant_func_descr): Add GDBARCH parameter. (find_func_descr): Pass architecture to find_extant_func_descr and ia64_find_global_pointer. (ia64_sigtramp_frame_init_saved_regs): Pass architecture to tdep->sigcontext_register_address callback. * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add GDBARCH parameter. * iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter. (iq2000_frame_cache): Pass architecture to iq2000_scan_prologue. * lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter. (lm32_skip_prologue, lm32_frame_cache): Pass architecture to lm32_analyze_prologue. * m32r-tdep.c (decode_prologue): Add GDBARCH parameter. (m32r_skip_prologue): Pass architecture to decode_prologue. * m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter. (m68hc11_scan_prologue): Pass architecture to m68hc11_analyze_instruction. * m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter. (m68k_analyze_prologue): Pass architecture to m68k_analyze_frame_setup. * m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter. (m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order to m88k_fetch_instruction. (m88k_skip_prologue): Pass architecture to m88k_analyze_prologue. (m88k_frame_cache): Likewise. * mep-tdep.c (mep_get_insn): Add GDBARCH parameter. (mep_analyze_prologue): Pass architecture to mep_get_insn. * mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter. (mips32_next_pc): Pass architecture to mips_fetch_instruction. (deal_with_atomic_sequence): Likewise. (unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction. (mips16_scan_prologue): Likewise. (mips32_scan_prologue): Likewise. (mips16_in_function_epilogue_p): Likewise. (mips32_in_function_epilogue_p): Likewise. (mips_about_to_return): Likewise. (mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue. (mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue. (mips_skip_prologue): Pass architecture to mips16_scan_prologue and mips32_scan_prologue. (mips_in_function_epilogue_p): Pass architecture to mips16_in_function_epilogue_p and mips32_in_function_epilogue_p. (heuristic_proc_start): Pass architecture to mips_fetch_instruction and mips_about_to_return. (mips_skip_mips16_trampoline_code): Pass architecture to mips_fetch_instruction. (fetch_mips_16): Add GDBARCH parameter. (mips16_next_pc): Pass architecture to fetch_mips_16. (extended_mips16_next_pc): Pass architecture to unpack_mips16 and fetch_mips_16. * objc-lang.c (read_objc_method, read_objc_methlist_nmethods, read_objc_methlist_method, read_objc_object, read_objc_super, read_objc_class): Add GDBARCH parameter. (find_implementation_from_class): Add GDBARCH parameter, pass to read_objc_class, read_objc_methlist_nmethods, and read_objc_methlist_method. (find_implementation): Add GDBARCH parameter, pass to read_objc_object and find_implementation_from_class. (resolve_msgsend, resolve_msgsend_stret): Pass architecture to find_implementation. (resolve_msgsend_super, resolve_msgsend_super_stret): Pass architecture to read_objc_super and find_implementation_from_class. * ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter. (ppc64_standard_linkage1_target, ppc64_standard_linkage2_target, ppc64_standard_linkage3_target): Pass architecture to ppc64_desc_entry_point. * rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter. (skip_prologue): Pass byte order to bl_to_blrl_insn_p. (rs6000_fetch_instruction): Add GDBARCH parameter. (rs6000_skip_stack_check): Add GDBARCH parameter, pass to rs6000_fetch_instruction. (skip_prologue): Pass architecture to rs6000_fetch_instruction. * remote-mips.c (mips_store_word): Return old_contents as host integer value instead of target bytes. * s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member. (s390_analyze_prologue): Initialize it. (extend_simple_arg): Add GDBARCH parameter. (s390_push_dummy_call): Pass architecture to extend_simple_arg. * scm-lang.c (scm_get_field): Add BYTE_ORDER parameter. * scm-lang.h (scm_get_field): Add BYTE_ORDER parameter. (SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field. * scm-valprint.c (scm_scmval_print): Likewise. (scm_scmlist_print, scm_ipruk, scm_scmval_print): Define SCM_BYTE_ORDER. * sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter. (sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to look_for_args_moves. (sh64_skip_prologue): Pass architecture to sh64_skip_prologue_hard_way. * sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter. (sh_skip_prologue): Pass architecture to sh_analyze_prologue. (sh_frame_cache): Likewise. * solib-irix.c (extract_mips_address): Add GDBARCH parameter. (fetch_lm_info, irix_current_sos, irix_open_symbol_file_object): Pass architecture to extract_mips_address. * sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter. * sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter. (sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture to sparc_fetch_wcookie. (sparc32_frame_prev_register): Likewise. * sparc64-tdep.c (sparc64_frame_prev_register): Likewise. * sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise. * sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise. * spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter. (spu_skip_prologue): Pass architecture to spu_analyze_prologue. (spu_virtual_frame_pointer): Likewise. (spu_frame_unwind_cache): Likewise. (info_spu_mailbox_list): Add BYTE_ORER parameter. (info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list. (info_spu_dma_cmdlist): Add BYTE_ORER parameter. (info_spu_dma_command, info_spu_proxydma_command): Pass byte order to info_spu_dma_cmdlist. * symfile.c (read_target_long_array): Add GDBARCH parameter. (simple_read_overlay_table, simple_read_overlay_region_table, simple_overlay_update_1): Pass architecture to read_target_long_array. * v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter. (v850_frame_cache): Pass architecture to v850_analyze_prologue. * xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH parameter. (xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture to xstormy16_analyze_prologue. (xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter. (xstormy16_find_jmp_table_entry): Likewise. (xstormy16_skip_trampoline_code): Pass architecture to xstormy16_resolve_jmp_table_entry. (xstormy16_pointer_to_address): Likewise. (xstormy16_address_to_pointer): Pass architecture to xstormy16_find_jmp_table_entry. * xtensa-tdep.c (call0_track_op): Add GDBARCH parameter. (call0_analyze_prologue): Add GDBARCH parameter, pass to call0_track_op. (call0_frame_cache): Pass architecture to call0_analyze_prologue. (xtensa_skip_prologue): Likewise.
2009-07-02 19:25:59 +02:00
return i386_pe_skip_trampoline_code (frame, pc, NULL);
}
gdb 2010-03-05 Corinna Vinschen <vinschen@redhat.com> Tom Tromey <tromey@redhat.com> * utils.c (host_char_to_target): Add 'gdbarch' argument. (parse_escape): Likewise. * python/py-utils.c (unicode_to_target_string): Update. (unicode_to_target_python_string): Update. (target_string_to_unicode): Update. * printcmd.c (printf_command): Update. * p-exp.y (yylex): Update. * objc-exp.y (yylex): Update. * mi/mi-parse.c: Include charset.h. (mi_parse_escape): New function. (mi_parse_argv): Use it. * jv-exp.y (yylex): Update. * i386-cygwin-tdep.c (i386_cygwin_auto_wide_charset): New function. (i386_cygwin_init_abi): Call set_gdbarch_auto_wide_charset. * gdbarch.sh (auto_charset, auto_wide_charset): New. * gdbarch.c: Rebuild. * gdbarch.h: Rebuild. * defs.h (parse_escape): Update. * cli/cli-setshow.c: Include arch-utils.h. (do_setshow_command): Update. * cli/cli-cmds.c (echo_command): Update. * charset.h (target_charset, target_wide_charset): Update. * charset.c: Include arch-utils.h. (target_charset_name): Default to "auto". (target_wide_charset_name): Likewise. (show_target_charset_name): Handle "auto". (show_target_wide_charset_name): Likewise. (be_le_arch): New global. (set_be_le_names): Add 'gdbarch' argument. (validate): Likewise. Don't call set_be_le_names. (set_charset_sfunc, set_host_charset_sfunc) (set_target_charset_sfunc, set_target_wide_charset_sfunc): Update. (target_charset): Add 'gdbarch' argument. (target_wide_charset): Likewise. Remove 'byte_order' argument. (auto_target_charset_name): New global. (default_auto_charset, default_auto_wide_charset): New functions. (_initialize_charset): Set auto_target_charset_name. Allow "auto" for target charsets. Copy result of nl_langinfo. Use GetACP if USE_WIN32API. * c-lang.c (charset_for_string_type): Add 'gdbarch' argument, remove 'byte_order' argument. Update. (classify_type): Likewise. (c_emit_char): Update. (c_printchar): Update. (c_printstr): Update. (c_get_string): Update. (evaluate_subexp_c): Update. * arch-utils.h (default_auto_charset, default_auto_wide_charset): Declare. * python/python.c (gdbpy_target_charset): New function. (gdbpy_target_wide_charset): Likewise. (GdbMethods): Update. * NEWS: Update. gdb/doc * gdb.texinfo (Basic Python): Document target_charset and target_wide_charset. gdb/testsuite * gdb.python/py-prettyprint.py (pp_nullstr.to_string): Use gdb.target_charset. (pp_ns.to_string): Likewise.
2010-03-05 21:18:19 +01:00
static const char *
i386_cygwin_auto_wide_charset (void)
{
return "UTF-16";
}
static void
i386_cygwin_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
set_gdbarch_skip_trampoline_code (gdbarch, i386_cygwin_skip_trampoline_code);
set_gdbarch_skip_main_prologue (gdbarch, i386_skip_main_prologue);
tdep->struct_return = reg_struct_return;
tdep->gregset_reg_offset = i386_windows_gregset_reg_offset;
tdep->gregset_num_regs = ARRAY_SIZE (i386_windows_gregset_reg_offset);
tdep->sizeof_gregset = I386_WINDOWS_SIZEOF_GREGSET;
set_solib_ops (gdbarch, &solib_target_so_ops);
/* Core file support. */
set_gdbarch_regset_from_core_section
(gdbarch, i386_windows_regset_from_core_section);
set_gdbarch_core_xfer_shared_libraries
(gdbarch, windows_core_xfer_shared_libraries);
* corelow.c (core_pid_to_str): Default to using normal_pid_to_str instead of printing "Thread" here. * linux-tdep.c: Include inferior.h. (linux_core_pid_to_str): New. (linux_init_abi): New. * linux-tdep.h (linux_init_abi): Declare. * alpha-linux-tdep.c: Include linux-tdep.h. (alpha_linux_init_abi): Call linux_init_abi. * amd64-linux-tdep.c (amd64_linux_init_abi): Call linux_init_abi. * arm-linux-tdep.c (arm_linux_init_abi): Call linux_init_abi. * frv-linux-tdep.c: Include linux-tdep.h (frv_linux_init_abi): Call linux_init_abi. * hppa-linux-tdep.c: Include linux-tdep.h (hppa_linux_init_abi): Call linux_init_abi. * i386-linux-tdep.c (i386_linux_init_abi): Call linux_init_abi. * ia64-linux-tdep.c: Include linux-tdep.h. (ia64_linux_init_abi): Call linux_init_abi. * m32r-linux-tdep.c: Include linux-tdep.h. (m32r_linux_init_abi): Call linux_init_abi. * m68klinux-tdep.c: Include linux-tdep.h. (m68k_linux_init_abi): Call linux_init_abi. * microblaze-linux-tdep.c: Include linux-tdep.h. (microblaze_linux_init_abi): Call linux_init_abi. * mips-linux-tdep.c: Include linux-tdep.h. (mips_linux_init_abi): Call linux_init_abi. * mn10300-linux-tdep.c: Include linux-tdep.h. (am33_linux_init_osabi): Call linux_init_abi. Rename the 'gdbinfo' parameter to 'info'. * ppc-linux-tdep.c: Include linux-tdep.h. (ppc_linux_init_abi): Call linux_init_abi. * sh-linux-tdep.c: Include linux-tdep.h. (sh_linux_init_abi): Call linux_init_abi. * sparc-linux-tdep.c: Include linux-tdep.h. (sparc32_linux_init_abi): Call linux_init_abi. * sparc64-linux-tdep.c: Include linux-tdep.h. (sparc64_linux_init_abi): Call linux_init_abi. * xtensa-linux-tdep.c: Include linux-tdep.h. (xtensa_linux_init_abi): Call linux_init_abi. * i386-cygwin-tdep.c (i386_windows_core_pid_to_str): New. (i386_cygwin_init_abi): Install it as gdbarch_core_pid_to_str callback.
2010-08-04 17:27:57 +02:00
set_gdbarch_core_pid_to_str (gdbarch, i386_windows_core_pid_to_str);
gdb 2010-03-05 Corinna Vinschen <vinschen@redhat.com> Tom Tromey <tromey@redhat.com> * utils.c (host_char_to_target): Add 'gdbarch' argument. (parse_escape): Likewise. * python/py-utils.c (unicode_to_target_string): Update. (unicode_to_target_python_string): Update. (target_string_to_unicode): Update. * printcmd.c (printf_command): Update. * p-exp.y (yylex): Update. * objc-exp.y (yylex): Update. * mi/mi-parse.c: Include charset.h. (mi_parse_escape): New function. (mi_parse_argv): Use it. * jv-exp.y (yylex): Update. * i386-cygwin-tdep.c (i386_cygwin_auto_wide_charset): New function. (i386_cygwin_init_abi): Call set_gdbarch_auto_wide_charset. * gdbarch.sh (auto_charset, auto_wide_charset): New. * gdbarch.c: Rebuild. * gdbarch.h: Rebuild. * defs.h (parse_escape): Update. * cli/cli-setshow.c: Include arch-utils.h. (do_setshow_command): Update. * cli/cli-cmds.c (echo_command): Update. * charset.h (target_charset, target_wide_charset): Update. * charset.c: Include arch-utils.h. (target_charset_name): Default to "auto". (target_wide_charset_name): Likewise. (show_target_charset_name): Handle "auto". (show_target_wide_charset_name): Likewise. (be_le_arch): New global. (set_be_le_names): Add 'gdbarch' argument. (validate): Likewise. Don't call set_be_le_names. (set_charset_sfunc, set_host_charset_sfunc) (set_target_charset_sfunc, set_target_wide_charset_sfunc): Update. (target_charset): Add 'gdbarch' argument. (target_wide_charset): Likewise. Remove 'byte_order' argument. (auto_target_charset_name): New global. (default_auto_charset, default_auto_wide_charset): New functions. (_initialize_charset): Set auto_target_charset_name. Allow "auto" for target charsets. Copy result of nl_langinfo. Use GetACP if USE_WIN32API. * c-lang.c (charset_for_string_type): Add 'gdbarch' argument, remove 'byte_order' argument. Update. (classify_type): Likewise. (c_emit_char): Update. (c_printchar): Update. (c_printstr): Update. (c_get_string): Update. (evaluate_subexp_c): Update. * arch-utils.h (default_auto_charset, default_auto_wide_charset): Declare. * python/python.c (gdbpy_target_charset): New function. (gdbpy_target_wide_charset): Likewise. (GdbMethods): Update. * NEWS: Update. gdb/doc * gdb.texinfo (Basic Python): Document target_charset and target_wide_charset. gdb/testsuite * gdb.python/py-prettyprint.py (pp_nullstr.to_string): Use gdb.target_charset. (pp_ns.to_string): Likewise.
2010-03-05 21:18:19 +01:00
set_gdbarch_auto_wide_charset (gdbarch, i386_cygwin_auto_wide_charset);
/* Canonical paths on this target look like
`c:\Program Files\Foo App\mydll.dll', for example. */
set_gdbarch_has_dos_based_file_system (gdbarch, 1);
}
static enum gdb_osabi
i386_cygwin_osabi_sniffer (bfd *abfd)
{
char *target_name = bfd_get_target (abfd);
/* Interix also uses pei-i386.
We need a way to distinguish between the two. */
if (strcmp (target_name, "pei-i386") == 0)
return GDB_OSABI_CYGWIN;
/* Cygwin uses elf core dumps. Do not claim all ELF executables,
check whether there is a .reg section of proper size. */
if (strcmp (target_name, "elf32-i386") == 0)
{
asection *section = bfd_get_section_by_name (abfd, ".reg");
if (section
&& bfd_section_size (abfd, section) == I386_WINDOWS_SIZEOF_GREGSET)
return GDB_OSABI_CYGWIN;
}
return GDB_OSABI_UNKNOWN;
}
* i386-tdep.h (i386bsd_sigcontext_addr): Remove prototype. (I386_SIZEOF_GREGS, I386_SIZEOF_FREGS, I386_SIZEOF_XREGS): Remove defenitions. (IS_FP_REGNUM, IS_SSE_REGNUM): Remove definitions. * i386-tdep.c: Mark functions that are 64-bit safe as such. (I386_EAX_REGNUM, I386_EDX_REGNUM, I386_ESP_REGNUM, I386_EBP_REGNUM, I386_EIP_REGNUM, I386_EFLAGS_REGNUM, I386_ST0_REGNUM): New defines. (CODESTREAM_BUFSIZ, codestream_tell, codestream_peek, codestream_get): Remove define. (codestream_next_addr, condestream_addr, condestream_buf, codestream_off, codestream_cnt): Remove variables. (codestream_fill, codestream_seek, codestream_read): Remove functions. (i386_follow_jump): Rewrite to avoid usage of removed codestream functionality. (i386_get_frame_setup, i386_frameless_signal_p, i386_frame_chain, i386_sigtramp_saved_pc, i386_sigtramp_saved_sp, i386_frame_saved_pc, i386_saved_pc_after_call, i386_frame_num_args, i386_frame_init_saved_regs, i386_push_return_address, i386_do_pop_frame, i386_pop_frame, i386_push_arguments): Remove functions. (i386_skip_prologue): Rewrite to avoid usage of removed codestream functionality. Use i386_analyze_prologue instead of i386_get_frame_setup. (I386_NUM_SAVED_REGS): New define. (struct i386_frame_cache): New structure. (i386_alloc_frame_cache, i386_analyze_struct_return, i386_skip_probe, i386_analyze_frame_setup, i386_analyze_register_saves, i386_analyze_prologue, i386_unwind_pc, i386_frame_cache, i386_frame_this_id, i386_frame_prev_register, i386_sigtramp_frame_cache, i386_sigtramp_frame_this_id, i386_sigtramp_frame_prev_register, i386_frame_p, i386_sigtramp_frame_p, i386_frame_base_address, i386_unwind_dummy_id, i386_save_dummy_tos, i386_push_dummy_call): New functions. (i386_frame_unwind, i386_sigtramp_frame_unwind, i386_frame_base): New variables. (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Define in terms of I386_EAX_REGNUM and I386_EDX_REGNUM. (i386_extract_return_value, i386_store_return_value): Use I386_ST0_REGNUM where appropriate. (i386_extract_struct_value_address): Rewrite to use extract_address. (i386_svr4_pc_in_sigtramp): Add comment. (i386_svr4_sigcontext_addr): Rewrite. (i386_svr4_init_abi): Adjust TDEP->sc_pc_offset and TDEP->sc_sp_offset. (i386_gdbarch_init): Don't set deprecated_init_frame_pc. Set sp_regnum, fp_regnum, pc_regnum, ps_regnum and fp0_regnum in terms of new defines. Set push_dummy_call, don't set deprecated_push_arguments, deprecated_push_return_address, deprecated_pop_frame. Don't set parm_boundary. Don't set deprecated_frame_chain, deprecated_frame_saved_pc, deprecated_saved_pc_after_call. Set unwind_dummy_id, save_dummy_frame_tos, unwind_pc. Call frame_unwind_append_predicate and frame_base_set_default. Don't set deprecated_dummy_write_pc. Don't set deprecated_fp_regnum. Don't set frameless_function_invocation. Don't set deprecated_register_bytes, deprecated_register_size, deprecated_call_dummy_words and deprecated_sizeof_call_dummy. * i386-linux-tdep.c: Fix formatting in some comments. (LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0, LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1, LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0, LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): Drop redundant parentheses. (I386_LINUX_UCONTEXT_SIGCONTEXT_OFFSET): New define. (i386_linux_sigcontext_addr): Use it. Rewrite. (find_minsym_and_objfile): Change name of second argument. (skip_gnu_resolver): Renamed from skip_hurd_resolver. All callers changed. Use frame_pc_unwind instead of DEPRECATED_SAVED_PC_AFTER_CALL. (i386_linux_init_abi): Don't set deprecated_register_bytes. * i386bsd-tdep.c (i386bsd_sigcontext_addr): Rewrite. * i386-nto-tdep.c (i386nto_sigcontext_addr): Adapt for new frame unwinder. * i386-cygwin-tdep.c: Don't include "gdbcore.h", "frame.h" and "dummy-frame.h". (i386_cygwin_frame_chain_valid, i386_cygwin_frame_chain): Removed. (_initialize_i386_cygwin_tdep): New prototype. (i386_cygwin_init_abi): Don't set deprecated_frame_chain and deprecated_frame_chain_valid. * i386-sol2-tdep.c (i386_sol2_init_abi): Don't set TDEP->sigcontext_addr, TDEP->sc_pc_offset and TDEP->sc_sp_offset. Rely on the SVR4 defaults. * config/i386/i386sol2.mt (TDEPFILES): Remove i386bsd-tdep.o. * Makefile.in (i386-tdep.o, i386-cygwin-tdep.o): Update dependencies.
2003-05-30 21:24:30 +02:00
/* Provide a prototype to silence -Wmissing-prototypes. */
void _initialize_i386_cygwin_tdep (void);
void
_initialize_i386_cygwin_tdep (void)
{
gdbarch_register_osabi_sniffer (bfd_arch_i386, bfd_target_coff_flavour,
i386_cygwin_osabi_sniffer);
/* Cygwin uses elf core dumps. */
gdbarch_register_osabi_sniffer (bfd_arch_i386, bfd_target_elf_flavour,
i386_cygwin_osabi_sniffer);
gdbarch_register_osabi (bfd_arch_i386, 0, GDB_OSABI_CYGWIN,
i386_cygwin_init_abi);
}