Target FP: Introduce target-float.{c,h}
This patch introduces the new set of target floating-point handling routines
in target-float.{c,h}. In the end, the intention is that this file will
contain support for all operations in target FP format, fully replacing
both the current doublest.{c,h} and dfp.{c,h}.
To begin with, this patch only adds a target_float_is_zero routine,
which handles the equivalent of decimal_is_zero for both binary and
decimal FP. For the binary case, to avoid conversion to DOUBLEST,
this is implemented using the floatformat_classify routine.
However, it turns out that floatformat_classify actually has a bug
(it was not used to check for zero before), so this is fixed as well.
The new routine is used in both value_logical_not and valpy_nonzero.
There is one extra twist: the code previously used value_as_double
to convert to DOUBLEST and then compare against zero. That routine
performs an extra task: it detects invalid floating-point values
and raises an error. In any place where value_as_double is removed
in favor of some target-float.c routine, we need to replace that check.
To keep this check centralized in one place, I've added a new routine
is_floating_value, which returns a boolean determining whether a
value's type is floating point (binary or decimal), and if so, also
performs the validity check. Since we need to check whether a value
is FP before calling any of the target-float routines anyway, this
seems a good place to add the check without much code size overhead.
In some places where we only want to check for floating-point types
and not perform a validity check (e.g. for the *output* of an operation),
we can use the new is_floating_type routine (in gdbarch) instead.
The validity check itself is done by a new target_float_is_valid
routine in target-float, encapsulating floatformat_is_valid.
ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* Makefile.c (SFILES): Add target-float.c.
(HFILES_NO_SRCDIR): Add target-float.h.
(COMMON_OBS): Add target-float.o.
* target-float.h: New file.
* target-float.c: New file.
* doublest.c (floatformat_classify): Fix detection of float_zero.
* gdbtypes.c (is_floating_type): New function.
* gdbtypes.h (is_floating_type): Add prototype.
* value.c: Do not include "floatformat.h".
(unpack_double): Use target_float_is_valid.
(is_floating_value): New function.
* value.h (is_floating_value): Add prototype-
* valarith.c: Include "target-float.h".
(value_logical_not): Use target_float_is_zero.
* python/py-value.c: Include "target-float.h".
(valpy_nonzero): Use target_float_is_zero.
2017-11-06 15:55:11 +01:00
|
|
|
/* Floating point definitions for GDB.
|
|
|
|
|
|
2020-01-01 07:20:01 +01:00
|
|
|
Copyright (C) 1986-2020 Free Software Foundation, Inc.
|
Target FP: Introduce target-float.{c,h}
This patch introduces the new set of target floating-point handling routines
in target-float.{c,h}. In the end, the intention is that this file will
contain support for all operations in target FP format, fully replacing
both the current doublest.{c,h} and dfp.{c,h}.
To begin with, this patch only adds a target_float_is_zero routine,
which handles the equivalent of decimal_is_zero for both binary and
decimal FP. For the binary case, to avoid conversion to DOUBLEST,
this is implemented using the floatformat_classify routine.
However, it turns out that floatformat_classify actually has a bug
(it was not used to check for zero before), so this is fixed as well.
The new routine is used in both value_logical_not and valpy_nonzero.
There is one extra twist: the code previously used value_as_double
to convert to DOUBLEST and then compare against zero. That routine
performs an extra task: it detects invalid floating-point values
and raises an error. In any place where value_as_double is removed
in favor of some target-float.c routine, we need to replace that check.
To keep this check centralized in one place, I've added a new routine
is_floating_value, which returns a boolean determining whether a
value's type is floating point (binary or decimal), and if so, also
performs the validity check. Since we need to check whether a value
is FP before calling any of the target-float routines anyway, this
seems a good place to add the check without much code size overhead.
In some places where we only want to check for floating-point types
and not perform a validity check (e.g. for the *output* of an operation),
we can use the new is_floating_type routine (in gdbarch) instead.
The validity check itself is done by a new target_float_is_valid
routine in target-float, encapsulating floatformat_is_valid.
ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* Makefile.c (SFILES): Add target-float.c.
(HFILES_NO_SRCDIR): Add target-float.h.
(COMMON_OBS): Add target-float.o.
* target-float.h: New file.
* target-float.c: New file.
* doublest.c (floatformat_classify): Fix detection of float_zero.
* gdbtypes.c (is_floating_type): New function.
* gdbtypes.h (is_floating_type): Add prototype.
* value.c: Do not include "floatformat.h".
(unpack_double): Use target_float_is_valid.
(is_floating_value): New function.
* value.h (is_floating_value): Add prototype-
* valarith.c: Include "target-float.h".
(value_logical_not): Use target_float_is_zero.
* python/py-value.c: Include "target-float.h".
(valpy_nonzero): Use target_float_is_zero.
2017-11-06 15:55:11 +01:00
|
|
|
|
|
|
|
|
This file is part of GDB.
|
|
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
|
|
2019-01-27 20:51:36 +01:00
|
|
|
#ifndef TARGET_FLOAT_H
|
|
|
|
|
#define TARGET_FLOAT_H
|
Target FP: Introduce target-float.{c,h}
This patch introduces the new set of target floating-point handling routines
in target-float.{c,h}. In the end, the intention is that this file will
contain support for all operations in target FP format, fully replacing
both the current doublest.{c,h} and dfp.{c,h}.
To begin with, this patch only adds a target_float_is_zero routine,
which handles the equivalent of decimal_is_zero for both binary and
decimal FP. For the binary case, to avoid conversion to DOUBLEST,
this is implemented using the floatformat_classify routine.
However, it turns out that floatformat_classify actually has a bug
(it was not used to check for zero before), so this is fixed as well.
The new routine is used in both value_logical_not and valpy_nonzero.
There is one extra twist: the code previously used value_as_double
to convert to DOUBLEST and then compare against zero. That routine
performs an extra task: it detects invalid floating-point values
and raises an error. In any place where value_as_double is removed
in favor of some target-float.c routine, we need to replace that check.
To keep this check centralized in one place, I've added a new routine
is_floating_value, which returns a boolean determining whether a
value's type is floating point (binary or decimal), and if so, also
performs the validity check. Since we need to check whether a value
is FP before calling any of the target-float routines anyway, this
seems a good place to add the check without much code size overhead.
In some places where we only want to check for floating-point types
and not perform a validity check (e.g. for the *output* of an operation),
we can use the new is_floating_type routine (in gdbarch) instead.
The validity check itself is done by a new target_float_is_valid
routine in target-float, encapsulating floatformat_is_valid.
ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* Makefile.c (SFILES): Add target-float.c.
(HFILES_NO_SRCDIR): Add target-float.h.
(COMMON_OBS): Add target-float.o.
* target-float.h: New file.
* target-float.c: New file.
* doublest.c (floatformat_classify): Fix detection of float_zero.
* gdbtypes.c (is_floating_type): New function.
* gdbtypes.h (is_floating_type): Add prototype.
* value.c: Do not include "floatformat.h".
(unpack_double): Use target_float_is_valid.
(is_floating_value): New function.
* value.h (is_floating_value): Add prototype-
* valarith.c: Include "target-float.h".
(value_logical_not): Use target_float_is_zero.
* python/py-value.c: Include "target-float.h".
(valpy_nonzero): Use target_float_is_zero.
2017-11-06 15:55:11 +01:00
|
|
|
|
2017-11-06 15:58:46 +01:00
|
|
|
#include "expression.h"
|
|
|
|
|
|
Target FP: Introduce target-float.{c,h}
This patch introduces the new set of target floating-point handling routines
in target-float.{c,h}. In the end, the intention is that this file will
contain support for all operations in target FP format, fully replacing
both the current doublest.{c,h} and dfp.{c,h}.
To begin with, this patch only adds a target_float_is_zero routine,
which handles the equivalent of decimal_is_zero for both binary and
decimal FP. For the binary case, to avoid conversion to DOUBLEST,
this is implemented using the floatformat_classify routine.
However, it turns out that floatformat_classify actually has a bug
(it was not used to check for zero before), so this is fixed as well.
The new routine is used in both value_logical_not and valpy_nonzero.
There is one extra twist: the code previously used value_as_double
to convert to DOUBLEST and then compare against zero. That routine
performs an extra task: it detects invalid floating-point values
and raises an error. In any place where value_as_double is removed
in favor of some target-float.c routine, we need to replace that check.
To keep this check centralized in one place, I've added a new routine
is_floating_value, which returns a boolean determining whether a
value's type is floating point (binary or decimal), and if so, also
performs the validity check. Since we need to check whether a value
is FP before calling any of the target-float routines anyway, this
seems a good place to add the check without much code size overhead.
In some places where we only want to check for floating-point types
and not perform a validity check (e.g. for the *output* of an operation),
we can use the new is_floating_type routine (in gdbarch) instead.
The validity check itself is done by a new target_float_is_valid
routine in target-float, encapsulating floatformat_is_valid.
ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* Makefile.c (SFILES): Add target-float.c.
(HFILES_NO_SRCDIR): Add target-float.h.
(COMMON_OBS): Add target-float.o.
* target-float.h: New file.
* target-float.c: New file.
* doublest.c (floatformat_classify): Fix detection of float_zero.
* gdbtypes.c (is_floating_type): New function.
* gdbtypes.h (is_floating_type): Add prototype.
* value.c: Do not include "floatformat.h".
(unpack_double): Use target_float_is_valid.
(is_floating_value): New function.
* value.h (is_floating_value): Add prototype-
* valarith.c: Include "target-float.h".
(value_logical_not): Use target_float_is_zero.
* python/py-value.c: Include "target-float.h".
(valpy_nonzero): Use target_float_is_zero.
2017-11-06 15:55:11 +01:00
|
|
|
extern bool target_float_is_valid (const gdb_byte *addr,
|
|
|
|
|
const struct type *type);
|
|
|
|
|
extern bool target_float_is_zero (const gdb_byte *addr,
|
|
|
|
|
const struct type *type);
|
|
|
|
|
|
2017-11-06 15:56:35 +01:00
|
|
|
extern std::string target_float_to_string (const gdb_byte *addr,
|
|
|
|
|
const struct type *type,
|
|
|
|
|
const char *format = nullptr);
|
|
|
|
|
extern bool target_float_from_string (gdb_byte *addr,
|
|
|
|
|
const struct type *type,
|
|
|
|
|
const std::string &string);
|
|
|
|
|
|
Target FP: Add conversion routines to target-float.{c,h}
This patch adds the following conversion routines:
- target_float_to_longest
- target_float_from_longest
- target_float_from_ulongest
- target_float_convert
which call the equivalent decimal_ routines to handle decimal FP,
and call helper routines that currently still go via DOUBLEST to
handle binary FP.
The target_float_convert routine not only handles BFP<->BFP and
DFP<->DFP conversions, but also BFP<->DFP, which are implemented
by converting to a string and back.
These helpers are used in particular to implement conversion
from and to FP in value_cast, without going through DOUBLEST there.
In order to implement this for the FP<-integer case, the
pack_long / pack_unsigned_long routines are extended to support
floating-point values as output (thereby allowing use of
value_from_[u]longest with a floating-point target type).
This latter change also allows simplification of value_one.
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* target-float.c (floatformat_to_longest): New function.
(floatformat_from_longest, floatformat_from_ulongest): Likewise.
(floatformat_convert): Likewise.
(target_float_to_longest): Likewise.
(target_float_from_longest, target_float_from_ulongest): Likewise.
(target_float_convert): Likewise.
* target-float.h (target_float_to_longest): Add prototype.
(target_float_from_longest, target_float_from_ulongest): Likewise.
(target_float_convert): Likewise.
* value.c (unpack_long): Use target_float_to_longest.
(pack_long): Allow FP types. Use target_float_from_longest.
(pack_unsigned_long): Likewise using target_float_from_ulongest.
* valops.c: Include "target-float.h". Do not include "dfp.h".
(value_cast): Handle conversions to FP using target_float_convert,
value_from_ulongest, and value_from_longest.
(value_one): Use value_from_longest for FP types as well.
2017-11-06 15:57:31 +01:00
|
|
|
extern LONGEST target_float_to_longest (const gdb_byte *addr,
|
|
|
|
|
const struct type *type);
|
|
|
|
|
extern void target_float_from_longest (gdb_byte *addr,
|
|
|
|
|
const struct type *type,
|
|
|
|
|
LONGEST val);
|
|
|
|
|
extern void target_float_from_ulongest (gdb_byte *addr,
|
|
|
|
|
const struct type *type,
|
|
|
|
|
ULONGEST val);
|
2017-11-06 16:00:47 +01:00
|
|
|
extern double target_float_to_host_double (const gdb_byte *addr,
|
|
|
|
|
const struct type *type);
|
|
|
|
|
extern void target_float_from_host_double (gdb_byte *addr,
|
|
|
|
|
const struct type *type,
|
|
|
|
|
double val);
|
Target FP: Add conversion routines to target-float.{c,h}
This patch adds the following conversion routines:
- target_float_to_longest
- target_float_from_longest
- target_float_from_ulongest
- target_float_convert
which call the equivalent decimal_ routines to handle decimal FP,
and call helper routines that currently still go via DOUBLEST to
handle binary FP.
The target_float_convert routine not only handles BFP<->BFP and
DFP<->DFP conversions, but also BFP<->DFP, which are implemented
by converting to a string and back.
These helpers are used in particular to implement conversion
from and to FP in value_cast, without going through DOUBLEST there.
In order to implement this for the FP<-integer case, the
pack_long / pack_unsigned_long routines are extended to support
floating-point values as output (thereby allowing use of
value_from_[u]longest with a floating-point target type).
This latter change also allows simplification of value_one.
gdb/ChangeLog:
2017-11-06 Ulrich Weigand <uweigand@de.ibm.com>
* target-float.c (floatformat_to_longest): New function.
(floatformat_from_longest, floatformat_from_ulongest): Likewise.
(floatformat_convert): Likewise.
(target_float_to_longest): Likewise.
(target_float_from_longest, target_float_from_ulongest): Likewise.
(target_float_convert): Likewise.
* target-float.h (target_float_to_longest): Add prototype.
(target_float_from_longest, target_float_from_ulongest): Likewise.
(target_float_convert): Likewise.
* value.c (unpack_long): Use target_float_to_longest.
(pack_long): Allow FP types. Use target_float_from_longest.
(pack_unsigned_long): Likewise using target_float_from_ulongest.
* valops.c: Include "target-float.h". Do not include "dfp.h".
(value_cast): Handle conversions to FP using target_float_convert,
value_from_ulongest, and value_from_longest.
(value_one): Use value_from_longest for FP types as well.
2017-11-06 15:57:31 +01:00
|
|
|
extern void target_float_convert (const gdb_byte *from,
|
|
|
|
|
const struct type *from_type,
|
|
|
|
|
gdb_byte *to, const struct type *to_type);
|
|
|
|
|
|
2017-11-06 15:58:46 +01:00
|
|
|
extern void target_float_binop (enum exp_opcode opcode,
|
|
|
|
|
const gdb_byte *x, const struct type *type_x,
|
|
|
|
|
const gdb_byte *y, const struct type *type_y,
|
|
|
|
|
gdb_byte *res, const struct type *type_res);
|
|
|
|
|
extern int target_float_compare (const gdb_byte *x, const struct type *type_x,
|
|
|
|
|
const gdb_byte *y, const struct type *type_y);
|
|
|
|
|
|
2019-01-27 20:51:36 +01:00
|
|
|
#endif /* TARGET_FLOAT_H */
|