OpenE2K
/
binutils-gdb
12
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
binutils-gdb/sim/configure.tgt

121 lines
2.4 KiB
Plaintext
Raw Normal View History

sim: unify target->subdir handling for default tests The testsuite subdir has a note about unifying the target->subdir logic, so do just that. The end goal here is to have `make check` work out of the box without having to delve into dejagnu internals. The target-specific logic is split out of the top level configure.ac file and into a dedicated configure.tgt similar to other subprojects (gdb and ld and etc...) with the difference that this file has to be included at the m4 level instead of the shell level. This is necessary only because autoconf requires AC_CONFIG_SUBDIRS be given a string literal and not a variable value. Then the toplevel and the testsuite configure files pull this in, the sim subdir gets expanded into testsuite/site.exp, and the default sim run code uses this info to set the sim path to the local compiled run file if it hasn't already been specified. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-04-26 18:23:24 +02:00
dnl Note that this file is intended to be included at the m4 level and not
dnl the shell level, so use sinclude(...) to pull it in.
# WHEN ADDING ENTRIES TO THIS MATRIX:
# Make sure that the left side always has two dashes. Otherwise you
# can get spurious matches. Even for unambiguous cases, do this as a
# convention, else the table becomes a real mess to understand and
# maintain.
dnl glue to avoid code duplication at top level
m4_ifndef([SIM_ARCH], [AC_DEFUN([SIM_ARCH],[sim_arch=$1])])
sim_testsuite=no
sim_common=yes
sim_igen=no
sim_arch=
case "${target}" in
gdb: * configure.host (xscale*): Don't handle target. * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't handle targets. gdb/gdbserver: * README: Don't mention xscale*-*-linux*. * configure.srv (xscale*-*-linux*): Don't handle target. gdb/testsuite: * gdb.base/a2-run.exp (strongarm-*-coff): Don't handle target. * gdb.base/float.exp (xscale*-*-*, strongarm*-*-*): Don't handle targets. * gdb.base/long_long.exp (xscale*-*-*, strongarm*-*-*): Don't handle targets. sim: * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't handle targets. * configure: Regenerate. sim/testsuite: * configure: Regenerate. * sim/arm/allinsn.exp (xscale*-*-*): Don't handle target. * sim/arm/misc.exp (thumb*-*-*, xscale*-*-*): Don't handle targets. * sim/arm/iwmmxt/iwmmxt.exp: Test for arm*-*-* instead of xscale*-*-*. * sim/arm/thumb/allthumb.exp (thumb*-*-*): Don't handle target. * sim/arm/xscale/xscale.exp: Test for arm*-*-* instead of xscale*-*-*.
2011-05-04 21:28:16 +02:00
arm*-*-*)
sim: unify target->subdir handling for default tests The testsuite subdir has a note about unifying the target->subdir logic, so do just that. The end goal here is to have `make check` work out of the box without having to delve into dejagnu internals. The target-specific logic is split out of the top level configure.ac file and into a dedicated configure.tgt similar to other subprojects (gdb and ld and etc...) with the difference that this file has to be included at the m4 level instead of the shell level. This is necessary only because autoconf requires AC_CONFIG_SUBDIRS be given a string literal and not a variable value. Then the toplevel and the testsuite configure files pull this in, the sim subdir gets expanded into testsuite/site.exp, and the default sim run code uses this info to set the sim path to the local compiled run file if it hasn't already been specified. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-04-26 18:23:24 +02:00
SIM_ARCH(arm)
sim_testsuite=yes
;;
avr*-*-*)
SIM_ARCH(avr)
;;
sim: bfin: new port This can boot Das U-Boot and a Linux kernel. It also supports Linux userspace FLAT and FDPIC (dynamic and static) ELFs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-06 01:20:21 +01:00
bfin-*-*)
SIM_ARCH(bfin)
sim: bfin: import testsuite Now that the common sim testsuite code supports .S and .c files, we can import the Blackfin testsuite. There are about ~800 tests here, so I'm only attaching a compressed patch of them. Other than adding files to sim/testsuite/sim/bfin/, the sim/configure.tgt file was updated to mark Blackfin as having a testsuite, and sim/configure regenerated. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-04 19:44:22 +02:00
sim_testsuite=yes
sim: bfin: new port This can boot Das U-Boot and a Linux kernel. It also supports Linux userspace FLAT and FDPIC (dynamic and static) ELFs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-06 01:20:21 +01:00
;;
sim: unify target->subdir handling for default tests The testsuite subdir has a note about unifying the target->subdir logic, so do just that. The end goal here is to have `make check` work out of the box without having to delve into dejagnu internals. The target-specific logic is split out of the top level configure.ac file and into a dedicated configure.tgt similar to other subprojects (gdb and ld and etc...) with the difference that this file has to be included at the m4 level instead of the shell level. This is necessary only because autoconf requires AC_CONFIG_SUBDIRS be given a string literal and not a variable value. Then the toplevel and the testsuite configure files pull this in, the sim subdir gets expanded into testsuite/site.exp, and the default sim run code uses this info to set the sim path to the local compiled run file if it hasn't already been specified. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-04-26 18:23:24 +02:00
cr16*-*-*)
SIM_ARCH(cr16)
sim_testsuite=yes
;;
cris-*-* | crisv32-*-*)
SIM_ARCH(cris)
sim_testsuite=yes
;;
d10v-*-*)
SIM_ARCH(d10v)
;;
frv-*-*)
SIM_ARCH(frv)
sim_testsuite=yes
;;
h8300*-*-*)
SIM_ARCH(h8300)
sim_testsuite=yes
;;
iq2000-*-*)
SIM_ARCH(iq2000)
sim_testsuite=yes
;;
lm32-*-*)
SIM_ARCH(lm32)
sim_testsuite=yes
;;
m32c-*-*)
SIM_ARCH(m32c)
;;
m32r-*-*)
SIM_ARCH(m32r)
sim_testsuite=yes
;;
m68hc11-*-*|m6811-*-*)
SIM_ARCH(m68hc11)
sim_testsuite=yes
;;
mcore-*-*)
SIM_ARCH(mcore)
sim_testsuite=yes
;;
microblaze-*-*)
SIM_ARCH(microblaze)
sim_testsuite=yes
;;
mips*-*-*)
SIM_ARCH(mips)
sim_testsuite=yes
sim_igen=yes
;;
mn10300*-*-*)
SIM_ARCH(mn10300)
sim_igen=yes
;;
moxie-*-*)
SIM_ARCH(moxie)
sim_testsuite=yes
;;
[sim] * configure.tgt: Add rl78 support. * configure: Regenerate. * rl78: New directory. * MAINTAINERS: Add myself as RL78 maintainer. [gdb] * NEWS: Mention RL78 simulator.
2011-11-29 04:49:09 +01:00
rl78-*-*)
SIM_ARCH(rl78)
;;
sim: unify target->subdir handling for default tests The testsuite subdir has a note about unifying the target->subdir logic, so do just that. The end goal here is to have `make check` work out of the box without having to delve into dejagnu internals. The target-specific logic is split out of the top level configure.ac file and into a dedicated configure.tgt similar to other subprojects (gdb and ld and etc...) with the difference that this file has to be included at the m4 level instead of the shell level. This is necessary only because autoconf requires AC_CONFIG_SUBDIRS be given a string literal and not a variable value. Then the toplevel and the testsuite configure files pull this in, the sim subdir gets expanded into testsuite/site.exp, and the default sim run code uses this info to set the sim path to the local compiled run file if it hasn't already been specified. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-04-26 18:23:24 +02:00
rx-*-*)
SIM_ARCH(rx)
;;
sh64*-*-*)
SIM_ARCH(sh64)
sim_testsuite=yes
;;
sh*-*-*)
SIM_ARCH(sh)
sim_testsuite=yes
;;
sparc-*-rtems*|sparc-*-elf*)
SIM_ARCH(erc32)
sim_testsuite=yes
;;
powerpc*-*-*)
SIM_ARCH(ppc)
;;
v850*-*-*)
SIM_ARCH(v850)
sim_igen=yes
sim_testsuite=yes
;;
*)
# No simulator subdir, so the subdir "common" isn't needed.
sim_common=no
;;
esac
AC_SUBST(sim_arch)