2003-08-30 Michael Chastain <mec@shout.net>

* Makefile.in: Remove tm-hp300bsd.h, tm-hp300hpux.h.
	* config/m68k/nm-hp300hpux.h: Delete.
	* config/m68k/tm-hp300hpux.h: Delete.
	* config/m68k/xm-hp300hpux.h: Delete.
	* config/m68k/xm-hp300bsd.h: Delete.
	* config/djgpp/fnchange.lst: Remove nm-hp300hpux.h,
	tm-hp300hpux.h, xm-hp300hpux.h.
	* somsolib.c: Remove comment about hp300 shared libraries.
This commit is contained in:
Michael Chastain 2003-09-01 02:11:07 +00:00
parent c79496d4be
commit 12e035e235
8 changed files with 13 additions and 329 deletions

View File

@ -1,3 +1,14 @@
2003-08-30 Michael Chastain <mec@shout.net>
* Makefile.in: Remove tm-hp300bsd.h, tm-hp300hpux.h.
* config/m68k/nm-hp300hpux.h: Delete.
* config/m68k/tm-hp300hpux.h: Delete.
* config/m68k/xm-hp300hpux.h: Delete.
* config/m68k/xm-hp300bsd.h: Delete.
* config/djgpp/fnchange.lst: Remove nm-hp300hpux.h,
tm-hp300hpux.h, xm-hp300hpux.h.
* somsolib.c: Remove comment about hp300 shared libraries.
2003-08-31 Mark Kettenis <kettenis@gnu.org>
* i386-linux-nat.c (ps_get_thread_area): Don't define as extern.

View File

@ -1098,8 +1098,8 @@ gdb1$(EXEEXT): gdb$(EXEEXT)
# for some machines.
# But these rules don't do what we want; we want to hack the foo.o: tm.h
# dependency to do the right thing.
tm-sun3.h tm-hp300bsd.h tm-altos.h: tm-m68k.h
tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-m68k.h
tm-sun3.h tm-altos.h: tm-m68k.h
tm-sun2.h tm-3b1.h: tm-m68k.h
xm-i386-sv32.h: xm-i386.h
tm-i386gas.h: tm-i386.h
tm-sun4os4.h: tm-sparc.h

View File

@ -100,10 +100,7 @@
@V@/gdb/config/i386/xm-i386v4.h @V@/gdb/config/i386/xm-v4.h
@V@/gdb/config/m68k/apollo68v.mh @V@/gdb/config/m68k/apollo-v.mh
@V@/gdb/config/m68k/nm-apollo68v.h @V@/gdb/config/m68k/nm-apolv.h
@V@/gdb/config/m68k/nm-hp300hpux.h @V@/gdb/config/m68k/nm-300ux.h
@V@/gdb/config/m68k/tm-hp300hpux.h @V@/gdb/config/m68k/tm-300ux.h
@V@/gdb/config/m68k/xm-apollo68v.h @V@/gdb/config/m68k/xm-apolv.h
@V@/gdb/config/m68k/xm-hp300hpux.h @V@/gdb/config/m68k/xm-300ux.h
@V@/gdb/config/m88k/tm-delta88v4.h @V@/gdb/config/m88k/tm-d88v4.h
@V@/gdb/config/m88k/xm-delta88v4.h @V@/gdb/config/m88k/xm-d88v4.h
@V@/gdb/config/mips/tm-bigmips64.h @V@/gdb/config/mips/tm-bigm64.h

View File

@ -1,55 +0,0 @@
/* Parameters for native support on HP 9000 model 320, for GDB, the GNU debugger.
Copyright 1986, 1987, 1989, 1992, 1993, 1996
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/* Do implement the attach and detach commands. */
#define ATTACH_DETACH
/* fetch_inferior_registers is in nat-hp300hpux.c. */
#define FETCH_INFERIOR_REGISTERS
/* Get registers from a core file. The floating point stuff is just
guesses. */
#define NEED_SYS_CORE_H
#define REGISTER_U_ADDR(addr, blockend, regno) \
{ \
if (regno < PS_REGNUM) \
addr = (int) (&((struct proc_regs *)(blockend))->d0 + regno); \
else if (regno == PS_REGNUM) \
addr = (int) ((char *) (&((struct proc_regs *)(blockend))->ps) - 2); \
else if (regno == PC_REGNUM) \
addr = (int) &((struct proc_regs *)(blockend))->pc; \
else if (regno < FPC_REGNUM) \
addr = (int) (((struct proc_regs *)(blockend))->mc68881 \
+ ((regno) - FP0_REGNUM) / 2); \
else \
addr = (int) (((struct proc_regs *)(blockend))->p_float \
+ (regno) - FPC_REGNUM); \
}
/* HPUX 8.0, in its infinite wisdom, has chosen to prototype ptrace
with five arguments, so programs written for normal ptrace lose.
Idiots.
(They should have just made it varadic). */
#define FIVE_ARG_PTRACE

View File

@ -1,33 +0,0 @@
/* Parameters for execution on an HP 9000 model 320, for GDB, the GNU debugger.
Copyright 1986, 1987, 1989, 1991, 1992, 1993
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/* GCC is the only compiler used for stabs on this OS. So get this
right even if the code which detects gcc2_compiled. is still
broken. */
#define BELIEVE_PCC_PROMOTION 1
/* Define BPT_VECTOR if it is different than the default.
This is the vector number used by traps to indicate a breakpoint. */
#define BPT_VECTOR 0x1
#include "m68k/tm-m68k.h"

View File

@ -1,83 +0,0 @@
/* Parameters for hosting on a Hewlett-Packard 9000/300, running bsd.
Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1995, 1996, 2000, 2001
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/*
* Configuration file for HP9000/300 series machine running
* University of Utah's 4.3bsd (or 4.4BSD) port. This is NOT for HP-UX.
* Problems to hpbsd-bugs@cs.utah.edu
*/
#include <sys/param.h> /* For INT_MIN */
/* Kernel is a bit tenacious about sharing text segments, disallowing bpts. */
#define ONE_PROCESS_WRITETEXT
/* Interface definitions for kernel debugger KDB. */
/* Map machine fault codes into signal numbers.
First subtract 0, divide by 4, then index in a table.
Faults for which the entry in this table is 0
are not handled by KDB; the program's own trap handler
gets to handle then. */
#define FAULT_CODE_ORIGIN 0
#define FAULT_CODE_UNITS 4
#define FAULT_TABLE \
{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \
0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \
0, 0, 0, 0, 0, 0, 0, 0, \
SIGILL }
/* Start running with a stack stretching from BEG to END.
BEG and END should be symbols meaningful to the assembler.
This is used only for kdb. */
#define INIT_STACK(beg, end) \
{ asm (".globl end"); \
asm ("movel #end, sp"); \
asm ("movel #0,a6"); }
/* Push the frame pointer register on the stack. */
#define PUSH_FRAME_PTR \
asm ("movel a6,sp@-");
/* Copy the top-of-stack to the frame pointer register. */
#define POP_FRAME_PTR \
asm ("movl sp@,a6");
/* After KDB is entered by a fault, push all registers
that GDB thinks about (all NUM_REGS of them),
so that they appear in order of ascending GDB register number.
The fault code will be on the stack beyond the last register. */
#define PUSH_REGISTERS \
{ asm ("clrw -(sp)"); \
asm ("pea sp@(10)"); \
asm ("movem #0xfffe,sp@-"); }
/* Assuming the registers (including processor status) have been
pushed on the stack in order of ascending GDB register number,
restore them and return to the address in the saved PC register. */
#define POP_REGISTERS \
{ asm ("subil #8,sp@(28)"); \
asm ("movem sp@,#0xffff"); \
asm ("rte"); }

View File

@ -1,150 +0,0 @@
/* Parameters for HP 9000 model 320 hosting, for GDB, the GNU debugger.
Copyright 1986, 1987, 1989, 1992, 1993, 1994, 1995, 1996
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/* Define this to indicate problems with traps after continuing. */
#define HP_OS_BUG
/* Set flag to indicate whether HP's assembler is in use. */
#ifdef __GNUC__
#ifdef __HPUX_ASM__
#define HPUX_ASM
#endif
#else /* not GNU C. */
#define HPUX_ASM
#endif /* not GNU C. */
/* Define this for versions of hp-ux older than 6.0 */
/* #define HPUX_VERSION_5 */
/* define USG if you are using sys5 /usr/include's */
#undef USG /* In case it was defined in the Makefile for cplus-dem.c */
#define USG
#define HAVE_TERMIOS
#define REGISTER_ADDR(u_ar0, regno) \
(unsigned int) \
(((regno) < PS_REGNUM) \
? (&((struct exception_stack *) (u_ar0))->e_regs[(regno + R0)]) \
: (((regno) == PS_REGNUM) \
? ((int *) (&((struct exception_stack *) (u_ar0))->e_PS)) \
: (&((struct exception_stack *) (u_ar0))->e_PC)))
#define FP_REGISTER_ADDR(u, regno) \
(((char *) \
(((regno) < FPC_REGNUM) \
? (&u.u_pcb.pcb_mc68881[FMC68881_R0 + (((regno) - FP0_REGNUM) * 3)]) \
: (&u.u_pcb.pcb_mc68881[FMC68881_C + ((regno) - FPC_REGNUM)]))) \
- ((char *) (& u)))
/* Interface definitions for kernel debugger KDB. */
/* Map machine fault codes into signal numbers.
First subtract 0, divide by 4, then index in a table.
Faults for which the entry in this table is 0
are not handled by KDB; the program's own trap handler
gets to handle then. */
#define FAULT_CODE_ORIGIN 0
#define FAULT_CODE_UNITS 4
#define FAULT_TABLE \
{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \
0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \
0, 0, 0, 0, 0, 0, 0, 0, \
SIGILL }
#ifndef HPUX_ASM
/* Start running with a stack stretching from BEG to END.
BEG and END should be symbols meaningful to the assembler.
This is used only for kdb. */
#define INIT_STACK(beg, end) \
{ asm (".globl end"); \
asm ("movel $ end, sp"); \
asm ("clrl fp"); }
/* Push the frame pointer register on the stack. */
#define PUSH_FRAME_PTR \
asm ("movel fp, -(sp)");
/* Copy the top-of-stack to the frame pointer register. */
#define POP_FRAME_PTR \
asm ("movl (sp), fp");
/* After KDB is entered by a fault, push all registers
that GDB thinks about (all NUM_REGS of them),
so that they appear in order of ascending GDB register number.
The fault code will be on the stack beyond the last register. */
#define PUSH_REGISTERS \
{ asm ("clrw -(sp)"); \
asm ("pea 10(sp)"); \
asm ("movem $ 0xfffe,-(sp)"); }
/* Assuming the registers (including processor status) have been
pushed on the stack in order of ascending GDB register number,
restore them and return to the address in the saved PC register. */
#define POP_REGISTERS \
{ asm ("subil $8,28(sp)"); \
asm ("movem (sp),$ 0xffff"); \
asm ("rte"); }
#else /* HPUX_ASM */
/* Start running with a stack stretching from BEG to END.
BEG and END should be symbols meaningful to the assembler.
This is used only for kdb. */
#define INIT_STACK(beg, end) \
{ asm ("global end"); \
asm ("mov.l &end,%sp"); \
asm ("clr.l %a6"); }
/* Push the frame pointer register on the stack. */
#define PUSH_FRAME_PTR \
asm ("mov.l %fp,-(%sp)");
/* Copy the top-of-stack to the frame pointer register. */
#define POP_FRAME_PTR \
asm ("mov.l (%sp),%fp");
/* After KDB is entered by a fault, push all registers
that GDB thinks about (all NUM_REGS of them),
so that they appear in order of ascending GDB register number.
The fault code will be on the stack beyond the last register. */
#define PUSH_REGISTERS \
{ asm ("clr.w -(%sp)"); \
asm ("pea 10(%sp)"); \
asm ("movm.l &0xfffe,-(%sp)"); }
/* Assuming the registers (including processor status) have been
pushed on the stack in order of ascending GDB register number,
restore them and return to the address in the saved PC register. */
#define POP_REGISTERS \
{ asm ("subi.l &8,28(%sp)"); \
asm ("mov.m (%sp),&0xffff"); \
asm ("rte"); }
#endif /* HPUX_ASM */

View File

@ -74,9 +74,6 @@ extern struct unwind_table_entry *find_unwind_entry (CORE_ADDR pc);
/* TODO:
* Most of this code should work for hp300 shared libraries. Does
anyone care enough to weed out any SOM-isms.
* Support for hpux8 dynamic linker. */
/* The basic structure which describes a dynamically loaded object. This