src-release.sh: Convert src-release to a shell script
This began as an attempt to make a few small changes to src-release but heeding the comments at the top of the file it seemed it might be wise to convert it to a shell script instead which should hopefully be more maintainable. This shell script contains most of the functionality of the Makefile version. It can be run like this: # This will build gdb and compress with bzip2, gzip and xz ./src-release.sh -bgx gdb The functionality that has been removed is building tarballs for insight and gnats, which were broken in the current repository layout and gas+binutils which amounted to basically the same thing as binutils so didn't seem worth keeping. The script always builds a tar file, compression is optional, so no need for specific commands to build tar files rather than compressed tar files. The build of gas releases has been fixed, as has extraction of version numbers which had been broken since the switch to configure.ac files and AC_INIT. I also removed the code for distcleaning the intl sub-directory as it seems like that issue has been fixed. The script is capable of compressing with bzip2, gzip and xz which should cover all formats available on gnu.org. I tested it by producing release tarballs which are substantially identical to the ones produced by the src-release script. ChangeLog: 2014-08-27 Will Newton <will.newton@linaro.org> * src-release.sh: New file. * src-release: Remove file.
This commit is contained in:
Will Newton
parent
7322eefb9e
commit
2536ee9d03
@ -1,3 +1,8 @@
|
||||
2014-08-27 Will Newton <will.newton@linaro.org>
|
||||
|
||||
* src-release.sh: New file.
|
||||
* src-release: Remove file.
|
||||
|
||||
2014-07-27 Joel Sherrill <joel.sherrill@oarcorp.com>
|
||||
|
||||
GDB not supported for or1k*-*-rtems*
|
||||
|
||||
318
src-release
318
src-release
@ -1,318 +0,0 @@
|
||||
# Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
|
||||
# 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation
|
||||
#
|
||||
# This file is free software; you can redistribute it and/or modify
|
||||
# it under the terms of the GNU General Public License as published by
|
||||
# the Free Software Foundation; either version 2 of the License, or
|
||||
# (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
|
||||
#
|
||||
|
||||
# This Makefile contains release scripts for gdb, binutils, and other
|
||||
# packages which live in src. It used to be part of the top level Makefile,
|
||||
# but that turned out to be very messy and hard to maintain.
|
||||
|
||||
# This stuff really ought to be cleaned up and turned into something other
|
||||
# than a Makefile. As it is it's heavily recursive.
|
||||
|
||||
# This is the name of this script (!). Needed due to horrible recursion.
|
||||
SELF = src-release
|
||||
|
||||
SHELL = /bin/sh
|
||||
|
||||
BZIPPROG = bzip2
|
||||
MD5PROG = md5sum
|
||||
|
||||
# (Default to avoid splitting info files by setting the threshold high.)
|
||||
MAKEINFOFLAGS = --split-size=5000000
|
||||
|
||||
# pwd command to use. Allow user to override default by setting PWDCMD in
|
||||
# the environment to account for automounters. The make variable must not
|
||||
# be called PWDCMD, otherwise the value set here is passed to make
|
||||
# subprocesses and overrides the setting from the user's environment.
|
||||
PWD = $${PWDCMD-pwd}
|
||||
|
||||
#
|
||||
# Support for building net releases
|
||||
|
||||
# Files in devo used in any net release.
|
||||
DEVO_SUPPORT= README Makefile.in configure configure.ac \
|
||||
config.guess config.sub config move-if-change \
|
||||
COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
|
||||
mkinstalldirs ltmain.sh missing ylwrap \
|
||||
libtool.m4 ltsugar.m4 ltversion.m4 ltoptions.m4 \
|
||||
Makefile.def Makefile.tpl src-release config.rpath \
|
||||
ChangeLog MAINTAINERS README-maintainer-mode \
|
||||
lt~obsolete.m4 ltgcc.m4 depcomp mkdep compile \
|
||||
COPYING3 COPYING3.LIB
|
||||
|
||||
# Files in devo/etc used in any net release.
|
||||
ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
|
||||
make-stds.texi standards.info* configure.texi configure.info* \
|
||||
ChangeLog configbuild.* configdev.* fdl.texi texi2pod.pl gnu-oids.texi
|
||||
|
||||
|
||||
# When you use `make setup-dirs' or `make taz' you should always redefine
|
||||
# this macro.
|
||||
SUPPORT_FILES = list-of-support-files-for-tool-in-question
|
||||
|
||||
# NOTE: No double quotes in the below. It is used within shell script
|
||||
# as VER="$(VER)"
|
||||
VER = ` if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
|
||||
bfd/configure --version | sed -n -e '1s,.* ,,p'; \
|
||||
elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
|
||||
sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
|
||||
elif test -f $(TOOL)/common/create-version.sh; then \
|
||||
$(TOOL)/common/create-version.sh $(TOOL) \
|
||||
'dummy-host' 'dummy-target' \
|
||||
VER.tmp; \
|
||||
cat VER.tmp | grep 'version\[\]' | sed 's/.*"\([^"]*\)".*/\1/' | sed 's/-cvs$$//'; \
|
||||
rm -f VER.tmp; \
|
||||
elif test -f $(TOOL)/version.in; then \
|
||||
head -1 $(TOOL)/version.in; \
|
||||
elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
|
||||
sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
|
||||
else \
|
||||
echo VERSION; \
|
||||
fi`
|
||||
PACKAGE = $(TOOL)
|
||||
|
||||
.PHONY: taz
|
||||
taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
|
||||
$(MAKE) -f $(SELF) do-proto-toplev \
|
||||
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(SUPPORT_FILES)"
|
||||
$(MAKE) -f $(SELF) do-md5sum \
|
||||
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(SUPPORT_FILES)"
|
||||
$(MAKE) -f $(SELF) do-tar \
|
||||
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(SUPPORT_FILES)"
|
||||
$(MAKE) -f $(SELF) do-bz2 \
|
||||
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(SUPPORT_FILES)"
|
||||
|
||||
.PHONY: gdb-tar
|
||||
gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
|
||||
$(MAKE) -f $(SELF) do-proto-toplev \
|
||||
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(SUPPORT_FILES)"
|
||||
$(MAKE) -f $(SELF) do-md5sum \
|
||||
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(SUPPORT_FILES)"
|
||||
$(MAKE) -f $(SELF) do-djunpack \
|
||||
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(SUPPORT_FILES)"
|
||||
$(MAKE) -f $(SELF) do-tar \
|
||||
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(SUPPORT_FILES)"
|
||||
|
||||
.PHONY: gdb-taz
|
||||
gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
|
||||
$(MAKE) -f $(SELF) gdb-tar \
|
||||
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(SUPPORT_FILES)"
|
||||
$(MAKE) -f $(SELF) do-bz2 \
|
||||
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(SUPPORT_FILES)"
|
||||
|
||||
.PHONY: do-proto-toplev
|
||||
do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
|
||||
echo "==> Making $(PACKAGE)-$(VER)/"
|
||||
# Take out texinfo from a few places.
|
||||
sed -e '/^all\.normal: /s/\all-texinfo //' \
|
||||
-e '/^ install-texinfo /d' \
|
||||
<Makefile.in >tmp
|
||||
mv -f tmp Makefile.in
|
||||
#
|
||||
./configure i686-pc-linux-gnu
|
||||
$(MAKE) configure-host configure-target \
|
||||
ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
|
||||
CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
|
||||
# Make links, and run "make diststuff" or "make info" when needed.
|
||||
rm -rf proto-toplev ; mkdir proto-toplev
|
||||
set -e ; dirs="$(DEVO_SUPPORT) $(SUPPORT_FILES) $(TOOL)" ; \
|
||||
for d in $$dirs ; do \
|
||||
if [ -d $$d ]; then \
|
||||
if [ ! -f $$d/Makefile ] ; then true ; \
|
||||
elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
|
||||
(cd $$d ; $(MAKE) MAKEINFOFLAGS="$(MAKEINFOFLAGS)" \
|
||||
diststuff ) || exit 1 ; \
|
||||
elif grep '^info:' $$d/Makefile >/dev/null ; then \
|
||||
(cd $$d ; $(MAKE) MAKEINFOFLAGS="$(MAKEINFOFLAGS)" \
|
||||
info ) || exit 1 ; \
|
||||
fi ; \
|
||||
if [ -d $$d/proto-$$d.dir ]; then \
|
||||
ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
|
||||
else \
|
||||
ln -s ../$$d proto-toplev/$$d ; \
|
||||
fi ; \
|
||||
else \
|
||||
if (echo x$$d | grep / >/dev/null); then \
|
||||
mkdir -p proto-toplev/`dirname $$d` ; \
|
||||
x=`dirname $$d` ; \
|
||||
ln -s ../`echo $$x/ | sed -e 's,[^/]*/,../,g'`$$d proto-toplev/$$d ; \
|
||||
else \
|
||||
ln -s ../$$d proto-toplev/$$d ; \
|
||||
fi ; \
|
||||
fi ; \
|
||||
done
|
||||
cd etc && $(MAKE) MAKEINFOFLAGS="$(MAKEINFOFLAGS)" info
|
||||
$(MAKE) distclean
|
||||
# Kludge for pr gdb/857. intl/Makefile.in lacks a couple
|
||||
# of files in the distclean rule. Zack W is planning to make
|
||||
# the gcc version of intl/ the master version and then push
|
||||
# that version to src soon. See:
|
||||
# http://sources.redhat.com/ml/binutils/2003-07/msg00032.html
|
||||
# After the src version of intl/ is upgraded, we can look at
|
||||
# moving this logic into intl/Makefile.in distclean rule
|
||||
# if it is still needed. -- chastain 2003-09-12
|
||||
rm -f intl/config.cache
|
||||
rm -f intl/config.status
|
||||
rm -f intl/config.h
|
||||
rm -f intl/stamp-h
|
||||
#
|
||||
mkdir proto-toplev/etc
|
||||
(cd proto-toplev/etc; \
|
||||
for i in $(ETC_SUPPORT); do \
|
||||
ln -s ../../etc/$$i . ; \
|
||||
done)
|
||||
#
|
||||
# Take out texinfo from configurable dirs
|
||||
rm proto-toplev/configure.ac
|
||||
sed -e '/^host_tools=/s/texinfo //' \
|
||||
<configure.ac >proto-toplev/configure.ac
|
||||
#
|
||||
mkdir proto-toplev/texinfo
|
||||
ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
|
||||
if test -r texinfo/util/tex3patch ; then \
|
||||
mkdir proto-toplev/texinfo/util && \
|
||||
ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
|
||||
else true; fi
|
||||
chmod -R og=u . || chmod og=u `find . -print`
|
||||
#
|
||||
# Create .gmo files from .po files.
|
||||
for f in `find . -name '*.po' -type f -print`; do \
|
||||
msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
|
||||
done
|
||||
#
|
||||
-rm -f $(PACKAGE)-$(VER)
|
||||
ln -s proto-toplev $(PACKAGE)-$(VER)
|
||||
|
||||
CVS_NAMES= \( -name CVS -o -name '.cvsignore' \)
|
||||
|
||||
.PHONY: do-tar
|
||||
do-tar:
|
||||
echo "==> Making $(PACKAGE)-$(VER).tar"
|
||||
-rm -f $(PACKAGE)-$(VER).tar
|
||||
find $(PACKAGE)-$(VER) -follow $(CVS_NAMES) -prune \
|
||||
-o -type f -print \
|
||||
| tar cTfh - $(PACKAGE)-$(VER).tar
|
||||
|
||||
.PHONY: do-bz2
|
||||
do-bz2:
|
||||
echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
|
||||
-rm -f $(PACKAGE)-$(VER).tar.bz2
|
||||
$(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
|
||||
|
||||
.PHONY: do-md5sum
|
||||
do-md5sum:
|
||||
echo "==> Adding md5 checksum to top-level directory"
|
||||
cd proto-toplev && find * -follow $(CVS_NAMES) -prune \
|
||||
-o -type f -print \
|
||||
| xargs $(MD5PROG) > ../md5.new
|
||||
-rm -f proto-toplev/md5.sum
|
||||
mv md5.new proto-toplev/md5.sum
|
||||
|
||||
.PHONY: do-djunpack
|
||||
do-djunpack:
|
||||
echo "==> Adding updated djunpack.bat to top-level directory"
|
||||
echo - 's /gdb-[0-9\.]*/$(PACKAGE)-'"$(VER)"'/'
|
||||
sed < djunpack.bat > djunpack.new \
|
||||
-e 's/gdb-[0-9][0-9\.]*/$(PACKAGE)-'"$(VER)"'/'
|
||||
-rm -f proto-toplev/djunpack.bat
|
||||
mv djunpack.new proto-toplev/djunpack.bat
|
||||
|
||||
TEXINFO_SUPPORT= texinfo/texinfo.tex
|
||||
DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
|
||||
|
||||
.PHONY: gas.tar.bz2
|
||||
GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep
|
||||
gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
|
||||
$(MAKE) -f $(SELF) taz TOOL=gas \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
|
||||
|
||||
# The FSF "binutils" release includes gprof and ld.
|
||||
.PHONY: binutils.tar.bz2
|
||||
BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld elfcpp gold gprof intl setup.com makefile.vms cpu
|
||||
binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
|
||||
$(MAKE) -f $(SELF) taz TOOL=binutils \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
|
||||
|
||||
.PHONY: gas+binutils.tar.bz2
|
||||
GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
|
||||
gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
|
||||
$(MAKE) -f $(SELF) taz TOOL=gas \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
|
||||
|
||||
GNATS_SUPPORT_DIRS=include libiberty send-pr
|
||||
gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
|
||||
$(MAKE) -f $(SELF) taz TOOL=gnats \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
|
||||
|
||||
.PHONY: gdb.tar.bz2
|
||||
GDB_SUPPORT_DIRS= bfd include libiberty opcodes readline sim intl libdecnumber cpu
|
||||
gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
|
||||
$(MAKE) -f $(SELF) gdb-taz TOOL=gdb \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
|
||||
.PHONY: gdb.tar
|
||||
gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
|
||||
$(MAKE) -f $(SELF) gdb-tar TOOL=gdb \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
|
||||
|
||||
# Corresponding to the CVS "sim" module.
|
||||
.PHONY: sim.tar.bz2
|
||||
SIM_SUPPORT_DIRS= bfd opcodes libiberty include intl gdb/version.in makefile.vms
|
||||
sim.tar.bz2: $(DIST_SUPPORT) $(SIM_SUPPORT_DIRS) sim
|
||||
$(MAKE) -f $(SELF) taz TOOL=sim \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(SIM_SUPPORT_DIRS)"
|
||||
|
||||
.PHONY: insight.tar.bz2
|
||||
INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl libgui
|
||||
insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
|
||||
$(MAKE) -f $(SELF) gdb-taz TOOL=gdb PACKAGE=insight \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
|
||||
.PHONY: insight.tar
|
||||
insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
|
||||
$(MAKE) -f $(SELF) gdb-tar TOOL=gdb PACKAGE=insight \
|
||||
MD5PROG="$(MD5PROG)" \
|
||||
SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
|
||||
|
||||
.NOEXPORT:
|
||||
MAKEOVERRIDES=
|
||||
352
src-release.sh
Executable file
352
src-release.sh
Executable file
@ -0,0 +1,352 @@
|
||||
#!/usr/bin/env bash
|
||||
# Copyright (C) 1990-2014 Free Software Foundation
|
||||
#
|
||||
# This file is free software; you can redistribute it and/or modify
|
||||
# it under the terms of the GNU General Public License as published by
|
||||
# the Free Software Foundation; either version 3 of the License, or
|
||||
# (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#
|
||||
|
||||
# This script creates release packages for gdb, binutils, and other
|
||||
# packages which live in src. It used to be implemented as the src-release
|
||||
# Makefile and prior to that was part of the top level Makefile, but that
|
||||
# turned out to be very messy and hard to maintain.
|
||||
|
||||
set -e
|
||||
|
||||
BZIPPROG=bzip2
|
||||
GZIPPROG=gzip
|
||||
XZPROG=xz
|
||||
MD5PROG=md5sum
|
||||
MAKE=make
|
||||
CC=gcc
|
||||
CXX=g++
|
||||
|
||||
# Default to avoid splitting info files by setting the threshold high.
|
||||
MAKEINFOFLAGS=--split-size=5000000
|
||||
|
||||
#
|
||||
# Support for building net releases
|
||||
|
||||
# Files in devo used in any net release.
|
||||
DEVO_SUPPORT="README Makefile.in configure configure.ac \
|
||||
config.guess config.sub config move-if-change \
|
||||
COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
|
||||
mkinstalldirs ltmain.sh missing ylwrap \
|
||||
libtool.m4 ltsugar.m4 ltversion.m4 ltoptions.m4 \
|
||||
Makefile.def Makefile.tpl src-release config.rpath \
|
||||
ChangeLog MAINTAINERS README-maintainer-mode \
|
||||
lt~obsolete.m4 ltgcc.m4 depcomp mkdep compile \
|
||||
COPYING3 COPYING3.LIB"
|
||||
|
||||
# Files in devo/etc used in any net release.
|
||||
ETC_SUPPORT="Makefile.in configure configure.in standards.texi \
|
||||
make-stds.texi standards.info* configure.texi configure.info* \
|
||||
ChangeLog configbuild.* configdev.* fdl.texi texi2pod.pl gnu-oids.texi"
|
||||
|
||||
# Get the version number of a given tool
|
||||
getver()
|
||||
{
|
||||
tool=$1
|
||||
if grep 'AC_INIT.*BFD_VERSION' $tool/configure.ac >/dev/null 2>&1; then
|
||||
bfd/configure --version | sed -n -e '1s,.* ,,p'
|
||||
elif test -f $tool/common/create-version.sh; then
|
||||
$tool/common/create-version.sh $tool 'dummy-host' 'dummy-target' VER.tmp
|
||||
cat VER.tmp | grep 'version\[\]' | sed 's/.*"\([^"]*\)".*/\1/' | sed 's/-cvs$//'
|
||||
rm -f VER.tmp
|
||||
elif test -f $tool/version.in; then
|
||||
head -1 $tool/version.in
|
||||
else
|
||||
echo VERSION
|
||||
fi
|
||||
}
|
||||
|
||||
# Setup build directory for building release tarball
|
||||
do_proto_toplev()
|
||||
{
|
||||
package=$1
|
||||
ver=$2
|
||||
tool=$3
|
||||
support_files=$4
|
||||
echo "==> Making $package-$ver/"
|
||||
# Take out texinfo from a few places.
|
||||
sed -e '/^all\.normal: /s/\all-texinfo //' \
|
||||
-e '/^ install-texinfo /d' \
|
||||
<Makefile.in >tmp
|
||||
mv -f tmp Makefile.in
|
||||
#
|
||||
./configure i686-pc-linux-gnu
|
||||
$MAKE configure-host configure-target \
|
||||
ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
|
||||
CC_FOR_TARGET="$CC" CXX_FOR_TARGET="$CXX"
|
||||
# Make links, and run "make diststuff" or "make info" when needed.
|
||||
rm -rf proto-toplev
|
||||
mkdir proto-toplev
|
||||
dirs="$DEVO_SUPPORT $support_files $tool"
|
||||
for d in $dirs ; do
|
||||
if [ -d $d ]; then
|
||||
if [ ! -f $d/Makefile ] ; then
|
||||
true
|
||||
elif grep '^diststuff:' $d/Makefile >/dev/null ; then
|
||||
(cd $d ; $MAKE MAKEINFOFLAGS="$MAKEINFOFLAGS" diststuff) \
|
||||
|| exit 1
|
||||
elif grep '^info:' $d/Makefile >/dev/null ; then
|
||||
(cd $d ; $MAKE MAKEINFOFLAGS="$MAKEINFOFLAGS" info) \
|
||||
|| exit 1
|
||||
fi
|
||||
if [ -d $d/proto-$d.dir ]; then
|
||||
ln -s ../$d/proto-$d.dir proto-toplev/$d
|
||||
else
|
||||
ln -s ../$d proto-toplev/$d
|
||||
fi
|
||||
else
|
||||
if (echo x$d | grep / >/dev/null); then
|
||||
mkdir -p proto-toplev/`dirname $d`
|
||||
x=`dirname $d`
|
||||
ln -s ../`echo $x/ | sed -e 's,[^/]*/,../,g'`$d proto-toplev/$d
|
||||
else
|
||||
ln -s ../$d proto-toplev/$d
|
||||
fi
|
||||
fi
|
||||
done
|
||||
(cd etc; $MAKE MAKEINFOFLAGS="$MAKEINFOFLAGS" info)
|
||||
$MAKE distclean
|
||||
mkdir proto-toplev/etc
|
||||
(cd proto-toplev/etc;
|
||||
for i in $ETC_SUPPORT; do
|
||||
ln -s ../../etc/$i .
|
||||
done)
|
||||
#
|
||||
# Take out texinfo from configurable dirs
|
||||
rm proto-toplev/configure.ac
|
||||
sed -e '/^host_tools=/s/texinfo //' \
|
||||
<configure.ac >proto-toplev/configure.ac
|
||||
#
|
||||
mkdir proto-toplev/texinfo
|
||||
ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
|
||||
if test -r texinfo/util/tex3patch ; then
|
||||
mkdir proto-toplev/texinfo/util && \
|
||||
ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util
|
||||
else
|
||||
true
|
||||
fi
|
||||
chmod -R og=u . || chmod og=u `find . -print`
|
||||
#
|
||||
# Create .gmo files from .po files.
|
||||
for f in `find . -name '*.po' -type f -print`; do
|
||||
msgfmt -o `echo $f | sed -e 's/\.po$/.gmo/'` $f
|
||||
done
|
||||
#
|
||||
rm -f $package-$ver
|
||||
ln -s proto-toplev $package-$ver
|
||||
}
|
||||
|
||||
CVS_NAMES='-name CVS -o -name .cvsignore'
|
||||
|
||||
# Add an md5sum to the built tarball
|
||||
do_md5sum()
|
||||
{
|
||||
echo "==> Adding md5 checksum to top-level directory"
|
||||
(cd proto-toplev && find * -follow \( $CVS_NAMES \) -prune \
|
||||
-o -type f -print \
|
||||
| xargs $MD5PROG > ../md5.new)
|
||||
rm -f proto-toplev/md5.sum
|
||||
mv md5.new proto-toplev/md5.sum
|
||||
}
|
||||
|
||||
# Build the release tarball
|
||||
do_tar()
|
||||
{
|
||||
package=$1
|
||||
ver=$2
|
||||
echo "==> Making $package-$ver.tar"
|
||||
rm -f $package-$ver.tar
|
||||
find $package-$ver -follow \( $CVS_NAMES \) -prune \
|
||||
-o -type f -print \
|
||||
| tar cTfh - $package-$ver.tar
|
||||
}
|
||||
|
||||
# Compress the output with bzip2
|
||||
do_bz2()
|
||||
{
|
||||
package=$1
|
||||
ver=$2
|
||||
echo "==> Bzipping $package-$ver.tar.bz2"
|
||||
rm -f $package-$ver.tar.bz2
|
||||
$BZIPPROG -k -v -9 $package-$ver.tar
|
||||
}
|
||||
|
||||
# Compress the output with gzip
|
||||
do_gz()
|
||||
{
|
||||
package=$1
|
||||
ver=$2
|
||||
echo "==> Gzipping $package-$ver.tar.gz"
|
||||
rm -f $package-$ver.tar.gz
|
||||
$GZIPPROG -k -v -9 $package-$ver.tar
|
||||
}
|
||||
|
||||
# Compress the output with xz
|
||||
do_xz()
|
||||
{
|
||||
package=$1
|
||||
ver=$2
|
||||
echo "==> Xzipping $package-$ver.tar.xz"
|
||||
rm -f $package-$ver.tar.xz
|
||||
$XZPROG -k -v -9 $package-$ver.tar
|
||||
}
|
||||
|
||||
# Compress the output with all selected compresion methods
|
||||
do_compress()
|
||||
{
|
||||
package=$1
|
||||
ver=$2
|
||||
compressors=$3
|
||||
for comp in $compressors; do
|
||||
case $comp in
|
||||
bz2)
|
||||
do_bz2 $package $ver;;
|
||||
gz)
|
||||
do_gz $package $ver;;
|
||||
xz)
|
||||
do_xz $package $ver;;
|
||||
*)
|
||||
echo "Unknown compression method: $comp" && exit 1;;
|
||||
esac
|
||||
done
|
||||
}
|
||||
|
||||
# Add djunpack.bat the tarball
|
||||
do_djunpack()
|
||||
{
|
||||
package=$1
|
||||
ver=$2
|
||||
echo "==> Adding updated djunpack.bat to top-level directory"
|
||||
echo - 's /gdb-[0-9\.]*/$package-'"$ver"'/'
|
||||
sed < djunpack.bat > djunpack.new \
|
||||
-e 's/gdb-[0-9][0-9\.]*/$package-'"$ver"'/'
|
||||
rm -f proto-toplev/djunpack.bat
|
||||
mv djunpack.new proto-toplev/djunpack.bat
|
||||
}
|
||||
|
||||
# Create a release package, tar it and compress it
|
||||
tar_compress()
|
||||
{
|
||||
package=$1
|
||||
tool=$2
|
||||
support_files=$3
|
||||
compressors=$4
|
||||
ver=$(getver $tool)
|
||||
do_proto_toplev $package $ver $tool "$support_files"
|
||||
do_md5sum
|
||||
do_tar $package $ver
|
||||
do_compress $package $ver "$compressors"
|
||||
}
|
||||
|
||||
# Create a gdb release package, tar it and compress it
|
||||
gdb_tar_compress()
|
||||
{
|
||||
package=$1
|
||||
tool=$2
|
||||
support_files=$3
|
||||
compressors=$4
|
||||
ver=$(getver $tool)
|
||||
do_proto_toplev $package $ver $tool "$support_files"
|
||||
do_md5sum
|
||||
do_djunpack $package $ver
|
||||
do_tar $package $ver
|
||||
do_compress $package $ver "$compressors"
|
||||
}
|
||||
|
||||
# The FSF "binutils" release includes gprof and ld.
|
||||
BINUTILS_SUPPORT_DIRS="bfd gas include libiberty opcodes ld elfcpp gold gprof intl setup.com makefile.vms cpu"
|
||||
binutils_release()
|
||||
{
|
||||
compressors=$1
|
||||
package=binutils
|
||||
tool=binutils
|
||||
tar_compress $package $tool "$BINUTILS_SUPPORT_DIRS" "$compressors"
|
||||
}
|
||||
|
||||
GAS_SUPPORT_DIRS="bfd include libiberty opcodes intl setup.com makefile.vms"
|
||||
gas_release()
|
||||
{
|
||||
compressors=$1
|
||||
package=gas
|
||||
tool=gas
|
||||
tar_compress $package $tool "$GAS_SUPPORT_DIRS" "$compressors"
|
||||
}
|
||||
|
||||
GDB_SUPPORT_DIRS="bfd include libiberty opcodes readline sim intl libdecnumber cpu"
|
||||
gdb_release()
|
||||
{
|
||||
compressors=$1
|
||||
package=gdb
|
||||
tool=gdb
|
||||
gdb_tar_compress $package $tool "$GDB_SUPPORT_DIRS" "$compressors"
|
||||
}
|
||||
|
||||
# Corresponding to the CVS "sim" module.
|
||||
SIM_SUPPORT_DIRS="bfd opcodes libiberty include intl gdb/version.in makefile.vms"
|
||||
sim_release()
|
||||
{
|
||||
compressors=$1
|
||||
package=sim
|
||||
tool=sim
|
||||
tar_compress $package $tool "$SIM_SUPPORT_DIRS" "$compressors"
|
||||
}
|
||||
|
||||
usage()
|
||||
{
|
||||
echo "src-release.sh <options> <release>"
|
||||
echo "options:"
|
||||
echo " -b: Compress with bzip2"
|
||||
echo " -g: Compress with gzip"
|
||||
echo " -x: Compress with xz"
|
||||
exit 1
|
||||
}
|
||||
|
||||
build_release()
|
||||
{
|
||||
release=$1
|
||||
compressors=$2
|
||||
case $release in
|
||||
binutils)
|
||||
binutils_release "$compressors";;
|
||||
gas)
|
||||
gas_release "$compressors";;
|
||||
gdb)
|
||||
gdb_release "$compressors";;
|
||||
sim)
|
||||
sim_release "$compressors";;
|
||||
*)
|
||||
echo "Unknown release name: $release" && usage;;
|
||||
esac
|
||||
}
|
||||
|
||||
compressors=""
|
||||
|
||||
while getopts ":gbx" opt; do
|
||||
case $opt in
|
||||
b)
|
||||
compressors="$compressors bz2";;
|
||||
g)
|
||||
compressors="$compressors gz";;
|
||||
x)
|
||||
compressors="$compressors xz";;
|
||||
\?)
|
||||
echo "Invalid option: -$OPTARG" && usage;;
|
||||
esac
|
||||
done
|
||||
shift $((OPTIND -1))
|
||||
release=$1
|
||||
|
||||
build_release $release "$compressors"
|
||||
Loading…
Reference in New Issue
Block a user