* acinclude.m4: Include libtool and gettext macros from the

top level.
* aclocal.m4, configure: Rebuilt.
This commit is contained in:
Alexandre Oliva 2000-08-31 09:46:11 +00:00
parent 6cf86f7f46
commit ac48eca1ad
24 changed files with 5159 additions and 6342 deletions

View File

@ -1,3 +1,9 @@
2000-08-31 Alexandre Oliva <aoliva@redhat.com>
* acinclude.m4: Include libtool and gettext macros from the
top level.
* aclocal.m4, configure: Rebuilt.
2000-08-29 Michael Snyder <msnyder@seadog.cygnus.com>
* elf.c: Eliminate references to __sparcv9 macro; replace with

View File

@ -108,4 +108,18 @@ AC_DEFUN(BFD_HAVE_SYS_PROCFS_TYPE_MEMBER,
AC_MSG_RESULT($bfd_cv_have_sys_procfs_type_member_$1_$2)
])
sinclude(../libtool.m4)
dnl The lines below arrange for aclocal not to bring libtool.m4
dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
dnl to add a definition of LIBTOOL to Makefile.in.
ifelse(yes,no,[
AC_DEFUN([AM_PROG_LIBTOOL],)
AC_DEFUN([AM_DISABLE_SHARED],)
AC_SUBST(LIBTOOL)
])
sinclude(../gettext.m4)
ifelse(yes,no,[
AC_DEFUN([CY_WITH_NLS],)
AC_SUBST(INTLLIBS)
])

764
bfd/aclocal.m4 vendored
View File

@ -1,4 +1,3 @@
dnl aclocal.m4 generated automatically by aclocal 1.4
dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
@ -121,7 +120,21 @@ AC_DEFUN(BFD_HAVE_SYS_PROCFS_TYPE_MEMBER,
AC_MSG_RESULT($bfd_cv_have_sys_procfs_type_member_$1_$2)
])
sinclude(../libtool.m4)
dnl The lines below arrange for aclocal not to bring libtool.m4
dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
dnl to add a definition of LIBTOOL to Makefile.in.
ifelse(yes,no,[
AC_DEFUN([AM_PROG_LIBTOOL],)
AC_DEFUN([AM_DISABLE_SHARED],)
AC_SUBST(LIBTOOL)
])
sinclude(../gettext.m4)
ifelse(yes,no,[
AC_DEFUN([CY_WITH_NLS],)
AC_SUBST(INTLLIBS)
])
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
@ -215,410 +228,6 @@ else
fi
AC_SUBST($1)])
# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Save cache, so that ltconfig can load it
AC_CACHE_SAVE
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])
AC_DEFUN(AC_LIBTOOL_SETUP,
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[libtool_flags="$libtool_flags --enable-win32-dll"])
AC_ARG_ENABLE(libtool-lock,
[ --disable-libtool-lock avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$host" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw*)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
])
esac
])
# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_SHARED, [dnl
define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_STATIC, [dnl
define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])
AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
fi])
])
# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
break
else
ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
])
# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case "$host" in
*-*-beos* | *-*-cygwin*)
# These system don't have libm
;;
*-ncr-sysv4.3*)
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
*)
AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library, adds --enable-ltdl-convenience to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library, and adds --enable-ltdl-install to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_CHECK_LIB(ltdl, main,
[test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
[if test x"$enable_ltdl_install" = xno; then
AC_MSG_WARN([libltdl not installed, but installation disabled])
else
enable_ltdl_install=yes
fi
])
if test x"$enable_ltdl_install" = x"yes"; then
ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
else
ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
LIBLTDL="-lltdl"
INCLTDL=
fi
])
dnl old names
AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl
# Like AC_CONFIG_HEADER, but automatically create stamp file.
AC_DEFUN(AM_CONFIG_HEADER,
@ -675,348 +284,3 @@ else
$1_FALSE=
fi])
# This file is derived from `gettext.m4'. The difference is that the
# included macros assume Cygnus-style source and build trees.
# Macro to add for using GNU gettext.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 3
AC_DEFUN(CY_WITH_NLS,
[AC_MSG_CHECKING([whether NLS is requested])
dnl Default is enabled NLS
AC_ARG_ENABLE(nls,
[ --disable-nls do not use Native Language Support],
USE_NLS=$enableval, USE_NLS=yes)
AC_MSG_RESULT($USE_NLS)
AC_SUBST(USE_NLS)
USE_INCLUDED_LIBINTL=no
dnl If we use NLS figure out what method
if test "$USE_NLS" = "yes"; then
AC_DEFINE(ENABLE_NLS, 1, [Define to 1 if NLS is requested])
AC_MSG_CHECKING([whether included gettext is requested])
AC_ARG_WITH(included-gettext,
[ --with-included-gettext use the GNU gettext library included here],
nls_cv_force_use_gnu_gettext=$withval,
nls_cv_force_use_gnu_gettext=no)
AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
dnl User does not insist on using GNU NLS library. Figure out what
dnl to use. If gettext or catgets are available (in this order) we
dnl use this. Else we have to fall back to GNU NLS library.
dnl catgets is only used if permitted by option --with-catgets.
nls_cv_header_intl=
nls_cv_header_libgt=
CATOBJEXT=NONE
AC_CHECK_HEADER(libintl.h,
[AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
[AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
if test "$gt_cv_func_gettext_libc" != "yes"; then
AC_CHECK_LIB(intl, bindtextdomain,
[AC_CACHE_CHECK([for gettext in libintl],
gt_cv_func_gettext_libintl,
[AC_TRY_LINK([], [return (int) gettext ("")],
gt_cv_func_gettext_libintl=yes,
gt_cv_func_gettext_libintl=no)])])
fi
if test "$gt_cv_func_gettext_libc" = "yes" \
|| test "$gt_cv_func_gettext_libintl" = "yes"; then
AC_DEFINE(HAVE_GETTEXT, 1,
[Define as 1 if you have gettext and don't want to use GNU gettext.])
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
if test "$MSGFMT" != "no"; then
AC_CHECK_FUNCS(dcgettext)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
return _nl_msg_cat_cntr],
[CATOBJEXT=.gmo
DATADIRNAME=share],
[CATOBJEXT=.mo
DATADIRNAME=lib])
INSTOBJEXT=.mo
fi
fi
])
dnl In the standard gettext, we would now check for catgets.
dnl However, we never want to use catgets for our releases.
if test "$CATOBJEXT" = "NONE"; then
dnl Neither gettext nor catgets in included in the C library.
dnl Fall back on GNU gettext library.
nls_cv_use_gnu_gettext=yes
fi
fi
if test "$nls_cv_use_gnu_gettext" = "yes"; then
dnl Mark actions used to generate GNU NLS library.
INTLOBJS="\$(GETTOBJS)"
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_SUBST(MSGFMT)
USE_INCLUDED_LIBINTL=yes
CATOBJEXT=.gmo
INSTOBJEXT=.mo
DATADIRNAME=share
INTLDEPS='$(top_builddir)/../intl/libintl.a'
INTLLIBS=$INTLDEPS
LIBS=`echo $LIBS | sed -e 's/-lintl//'`
nls_cv_header_intl=libintl.h
nls_cv_header_libgt=libgettext.h
fi
dnl Test whether we really found GNU xgettext.
if test "$XGETTEXT" != ":"; then
dnl If it is no GNU xgettext we define it as : so that the
dnl Makefiles still can work.
if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
: ;
else
AC_MSG_RESULT(
[found xgettext programs is not GNU xgettext; ignore it])
XGETTEXT=":"
fi
fi
# We need to process the po/ directory.
POSUB=po
else
DATADIRNAME=share
nls_cv_header_intl=libintl.h
nls_cv_header_libgt=libgettext.h
fi
# If this is used in GNU gettext we have to set USE_NLS to `yes'
# because some of the sources are only built for this goal.
if test "$PACKAGE" = gettext; then
USE_NLS=yes
USE_INCLUDED_LIBINTL=yes
fi
dnl These rules are solely for the distribution goal. While doing this
dnl we only have to keep exactly one list of the available catalogs
dnl in configure.in.
for lang in $ALL_LINGUAS; do
GMOFILES="$GMOFILES $lang.gmo"
POFILES="$POFILES $lang.po"
done
dnl Make all variables we use known to autoconf.
AC_SUBST(USE_INCLUDED_LIBINTL)
AC_SUBST(CATALOGS)
AC_SUBST(CATOBJEXT)
AC_SUBST(DATADIRNAME)
AC_SUBST(GMOFILES)
AC_SUBST(INSTOBJEXT)
AC_SUBST(INTLDEPS)
AC_SUBST(INTLLIBS)
AC_SUBST(INTLOBJS)
AC_SUBST(POFILES)
AC_SUBST(POSUB)
])
AC_DEFUN(CY_GNU_GETTEXT,
[AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_ISC_POSIX])dnl
AC_REQUIRE([AC_HEADER_STDC])dnl
AC_REQUIRE([AC_C_CONST])dnl
AC_REQUIRE([AC_C_INLINE])dnl
AC_REQUIRE([AC_TYPE_OFF_T])dnl
AC_REQUIRE([AC_TYPE_SIZE_T])dnl
AC_REQUIRE([AC_FUNC_ALLOCA])dnl
AC_REQUIRE([AC_FUNC_MMAP])dnl
AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
unistd.h values.h sys/param.h])
AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
__argz_count __argz_stringify __argz_next])
if test "${ac_cv_func_stpcpy+set}" != "set"; then
AC_CHECK_FUNCS(stpcpy)
fi
if test "${ac_cv_func_stpcpy}" = "yes"; then
AC_DEFINE(HAVE_STPCPY, 1, [Define if you have the stpcpy function])
fi
AM_LC_MESSAGES
CY_WITH_NLS
if test "x$CATOBJEXT" != "x"; then
if test "x$ALL_LINGUAS" = "x"; then
LINGUAS=
else
AC_MSG_CHECKING(for catalogs to be installed)
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
*$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
esac
done
LINGUAS=$NEW_LINGUAS
AC_MSG_RESULT($LINGUAS)
fi
dnl Construct list of names of catalog files to be constructed.
if test -n "$LINGUAS"; then
for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
fi
fi
dnl The reference to <locale.h> in the installed <libintl.h> file
dnl must be resolved because we cannot expect the users of this
dnl to define HAVE_LOCALE_H.
if test $ac_cv_header_locale_h = yes; then
INCLUDE_LOCALE_H="#include <locale.h>"
else
INCLUDE_LOCALE_H="\
/* The system does not provide the header <locale.h>. Take care yourself. */"
fi
AC_SUBST(INCLUDE_LOCALE_H)
dnl Determine which catalog format we have (if any is needed)
dnl For now we know about two different formats:
dnl Linux libc-5 and the normal X/Open format
if test -f $srcdir/po2tbl.sed.in; then
if test "$CATOBJEXT" = ".cat"; then
AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
dnl Transform the SED scripts while copying because some dumb SEDs
dnl cannot handle comments.
sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
fi
dnl po2tbl.sed is always needed.
sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
$srcdir/po2tbl.sed.in > po2tbl.sed
fi
dnl In the intl/Makefile.in we have a special dependency which makes
dnl only sense for gettext. We comment this out for non-gettext
dnl packages.
if test "$PACKAGE" = "gettext"; then
GT_NO="#NO#"
GT_YES=
else
GT_NO=
GT_YES="#YES#"
fi
AC_SUBST(GT_NO)
AC_SUBST(GT_YES)
MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
AC_SUBST(MKINSTALLDIRS)
dnl *** For now the libtool support in intl/Makefile is not for real.
l=
AC_SUBST(l)
dnl Generate list of files to be processed by xgettext which will
dnl be included in po/Makefile. But only do this if the po directory
dnl exists in srcdir.
if test -d $srcdir/po; then
test -d po || mkdir po
if test "x$srcdir" != "x."; then
if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
posrcprefix="$srcdir/"
else
posrcprefix="../$srcdir/"
fi
else
posrcprefix="../"
fi
rm -f po/POTFILES
sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
< $srcdir/po/POTFILES.in > po/POTFILES
fi
])
# Search path for a program which passes the given test.
# Ulrich Drepper <drepper@cygnus.com>, 1996.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
AC_DEFUN(AM_PATH_PROG_WITH_TEST,
[# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=[$]2
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL(ac_cv_path_$1,
[case "[$]$1" in
/*)
ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in ifelse([$5], , $PATH, [$5]); do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if [$3]; then
ac_cv_path_$1="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
dnl If no 4th arg is given, leave the cache variable unset,
dnl so AC_PATH_PROGS will keep looking.
ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
])dnl
;;
esac])dnl
$1="$ac_cv_path_$1"
if test -n "[$]$1"; then
AC_MSG_RESULT([$]$1)
else
AC_MSG_RESULT(no)
fi
AC_SUBST($1)dnl
])
# Check whether LC_MESSAGES is available in <locale.h>.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
AC_DEFUN(AM_LC_MESSAGES,
[if test $ac_cv_header_locale_h = yes; then
AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
[AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
if test $am_cv_val_LC_MESSAGES = yes; then
AC_DEFINE(HAVE_LC_MESSAGES, 1,
[Define if your locale.h file contains LC_MESSAGES.])
fi
fi])

1227
bfd/configure vendored

File diff suppressed because it is too large Load Diff

View File

@ -1,3 +1,9 @@
2000-08-31 Alexandre Oliva <aoliva@redhat.com>
* acinclude.m4: Include libtool and gettext macros from the
top level.
* aclocal.m4, configure: Rebuilt.
2000-08-30 Jamie Guinan <guinan@bluebutton.com>
* resrc.c (close_input_stream): delete extraneous logic

View File

@ -1 +1,16 @@
sinclude(../bfd/acinclude.m4)
dnl sinclude(../libtool.m4) already included in bfd/acinclude.m4
dnl The lines below arrange for aclocal not to bring libtool.m4
dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
dnl to add a definition of LIBTOOL to Makefile.in.
ifelse(yes,no,[
AC_DEFUN([AM_PROG_LIBTOOL],)
AC_SUBST(LIBTOOL)
])
dnl sinclude(../gettext.m4) already included in bfd/acinclude.m4
ifelse(yes,no,[
AC_DEFUN([CY_WITH_NLS],)
AC_SUBST(INTLLIBS)
])

769
binutils/aclocal.m4 vendored
View File

@ -12,6 +12,21 @@ dnl PARTICULAR PURPOSE.
sinclude(../bfd/acinclude.m4)
dnl sinclude(../libtool.m4) already included in bfd/acinclude.m4
dnl The lines below arrange for aclocal not to bring libtool.m4
dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
dnl to add a definition of LIBTOOL to Makefile.in.
ifelse(yes,no,[
AC_DEFUN([AM_PROG_LIBTOOL],)
AC_SUBST(LIBTOOL)
])
dnl sinclude(../gettext.m4) already included in bfd/acinclude.m4
ifelse(yes,no,[
AC_DEFUN([CY_WITH_NLS],)
AC_SUBST(INTLLIBS)
])
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
@ -104,415 +119,6 @@ else
fi
AC_SUBST($1)])
# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Save cache, so that ltconfig can load it
AC_CACHE_SAVE
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])
AC_DEFUN(AC_LIBTOOL_SETUP,
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
case "$target" in
NONE) lt_target="$host" ;;
*) lt_target="$target" ;;
esac
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[libtool_flags="$libtool_flags --enable-win32-dll"])
AC_ARG_ENABLE(libtool-lock,
[ --disable-libtool-lock avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw*)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
])
esac
])
# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_SHARED, [dnl
define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_STATIC, [dnl
define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])
AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
fi])
])
# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
break
else
ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
])
# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case "$lt_target" in
*-*-beos* | *-*-cygwin*)
# These system don't have libm
;;
*-ncr-sysv4.3*)
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
*)
AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library, adds --enable-ltdl-convenience to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library, and adds --enable-ltdl-install to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_CHECK_LIB(ltdl, main,
[test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
[if test x"$enable_ltdl_install" = xno; then
AC_MSG_WARN([libltdl not installed, but installation disabled])
else
enable_ltdl_install=yes
fi
])
if test x"$enable_ltdl_install" = x"yes"; then
ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
else
ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
LIBLTDL="-lltdl"
INCLTDL=
fi
])
dnl old names
AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl
# Like AC_CONFIG_HEADER, but automatically create stamp file.
AC_DEFUN(AM_CONFIG_HEADER,
@ -545,351 +151,6 @@ AC_CHECK_PROGS(LEX, flex lex, "$missing_dir/missing flex")
AC_PROG_LEX
AC_DECL_YYTEXT])
# This file is derived from `gettext.m4'. The difference is that the
# included macros assume Cygnus-style source and build trees.
# Macro to add for using GNU gettext.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 3
AC_DEFUN(CY_WITH_NLS,
[AC_MSG_CHECKING([whether NLS is requested])
dnl Default is enabled NLS
AC_ARG_ENABLE(nls,
[ --disable-nls do not use Native Language Support],
USE_NLS=$enableval, USE_NLS=yes)
AC_MSG_RESULT($USE_NLS)
AC_SUBST(USE_NLS)
USE_INCLUDED_LIBINTL=no
dnl If we use NLS figure out what method
if test "$USE_NLS" = "yes"; then
AC_DEFINE(ENABLE_NLS, 1, [Define to 1 if NLS is requested])
AC_MSG_CHECKING([whether included gettext is requested])
AC_ARG_WITH(included-gettext,
[ --with-included-gettext use the GNU gettext library included here],
nls_cv_force_use_gnu_gettext=$withval,
nls_cv_force_use_gnu_gettext=no)
AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
dnl User does not insist on using GNU NLS library. Figure out what
dnl to use. If gettext or catgets are available (in this order) we
dnl use this. Else we have to fall back to GNU NLS library.
dnl catgets is only used if permitted by option --with-catgets.
nls_cv_header_intl=
nls_cv_header_libgt=
CATOBJEXT=NONE
AC_CHECK_HEADER(libintl.h,
[AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
[AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
if test "$gt_cv_func_gettext_libc" != "yes"; then
AC_CHECK_LIB(intl, bindtextdomain,
[AC_CACHE_CHECK([for gettext in libintl],
gt_cv_func_gettext_libintl,
[AC_TRY_LINK([], [return (int) gettext ("")],
gt_cv_func_gettext_libintl=yes,
gt_cv_func_gettext_libintl=no)])])
fi
if test "$gt_cv_func_gettext_libc" = "yes" \
|| test "$gt_cv_func_gettext_libintl" = "yes"; then
AC_DEFINE(HAVE_GETTEXT, 1,
[Define as 1 if you have gettext and don't want to use GNU gettext.])
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
if test "$MSGFMT" != "no"; then
AC_CHECK_FUNCS(dcgettext)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
return _nl_msg_cat_cntr],
[CATOBJEXT=.gmo
DATADIRNAME=share],
[CATOBJEXT=.mo
DATADIRNAME=lib])
INSTOBJEXT=.mo
fi
fi
])
dnl In the standard gettext, we would now check for catgets.
dnl However, we never want to use catgets for our releases.
if test "$CATOBJEXT" = "NONE"; then
dnl Neither gettext nor catgets in included in the C library.
dnl Fall back on GNU gettext library.
nls_cv_use_gnu_gettext=yes
fi
fi
if test "$nls_cv_use_gnu_gettext" = "yes"; then
dnl Mark actions used to generate GNU NLS library.
INTLOBJS="\$(GETTOBJS)"
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_SUBST(MSGFMT)
USE_INCLUDED_LIBINTL=yes
CATOBJEXT=.gmo
INSTOBJEXT=.mo
DATADIRNAME=share
INTLDEPS='$(top_builddir)/../intl/libintl.a'
INTLLIBS=$INTLDEPS
LIBS=`echo $LIBS | sed -e 's/-lintl//'`
nls_cv_header_intl=libintl.h
nls_cv_header_libgt=libgettext.h
fi
dnl Test whether we really found GNU xgettext.
if test "$XGETTEXT" != ":"; then
dnl If it is no GNU xgettext we define it as : so that the
dnl Makefiles still can work.
if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
: ;
else
AC_MSG_RESULT(
[found xgettext programs is not GNU xgettext; ignore it])
XGETTEXT=":"
fi
fi
# We need to process the po/ directory.
POSUB=po
else
DATADIRNAME=share
nls_cv_header_intl=libintl.h
nls_cv_header_libgt=libgettext.h
fi
# If this is used in GNU gettext we have to set USE_NLS to `yes'
# because some of the sources are only built for this goal.
if test "$PACKAGE" = gettext; then
USE_NLS=yes
USE_INCLUDED_LIBINTL=yes
fi
dnl These rules are solely for the distribution goal. While doing this
dnl we only have to keep exactly one list of the available catalogs
dnl in configure.in.
for lang in $ALL_LINGUAS; do
GMOFILES="$GMOFILES $lang.gmo"
POFILES="$POFILES $lang.po"
done
dnl Make all variables we use known to autoconf.
AC_SUBST(USE_INCLUDED_LIBINTL)
AC_SUBST(CATALOGS)
AC_SUBST(CATOBJEXT)
AC_SUBST(DATADIRNAME)
AC_SUBST(GMOFILES)
AC_SUBST(INSTOBJEXT)
AC_SUBST(INTLDEPS)
AC_SUBST(INTLLIBS)
AC_SUBST(INTLOBJS)
AC_SUBST(POFILES)
AC_SUBST(POSUB)
])
AC_DEFUN(CY_GNU_GETTEXT,
[AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_ISC_POSIX])dnl
AC_REQUIRE([AC_HEADER_STDC])dnl
AC_REQUIRE([AC_C_CONST])dnl
AC_REQUIRE([AC_C_INLINE])dnl
AC_REQUIRE([AC_TYPE_OFF_T])dnl
AC_REQUIRE([AC_TYPE_SIZE_T])dnl
AC_REQUIRE([AC_FUNC_ALLOCA])dnl
AC_REQUIRE([AC_FUNC_MMAP])dnl
AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
unistd.h values.h sys/param.h])
AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
__argz_count __argz_stringify __argz_next])
if test "${ac_cv_func_stpcpy+set}" != "set"; then
AC_CHECK_FUNCS(stpcpy)
fi
if test "${ac_cv_func_stpcpy}" = "yes"; then
AC_DEFINE(HAVE_STPCPY, 1, [Define if you have the stpcpy function])
fi
AM_LC_MESSAGES
CY_WITH_NLS
if test "x$CATOBJEXT" != "x"; then
if test "x$ALL_LINGUAS" = "x"; then
LINGUAS=
else
AC_MSG_CHECKING(for catalogs to be installed)
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
*$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
esac
done
LINGUAS=$NEW_LINGUAS
AC_MSG_RESULT($LINGUAS)
fi
dnl Construct list of names of catalog files to be constructed.
if test -n "$LINGUAS"; then
for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
fi
fi
dnl The reference to <locale.h> in the installed <libintl.h> file
dnl must be resolved because we cannot expect the users of this
dnl to define HAVE_LOCALE_H.
if test $ac_cv_header_locale_h = yes; then
INCLUDE_LOCALE_H="#include <locale.h>"
else
INCLUDE_LOCALE_H="\
/* The system does not provide the header <locale.h>. Take care yourself. */"
fi
AC_SUBST(INCLUDE_LOCALE_H)
dnl Determine which catalog format we have (if any is needed)
dnl For now we know about two different formats:
dnl Linux libc-5 and the normal X/Open format
if test -f $srcdir/po2tbl.sed.in; then
if test "$CATOBJEXT" = ".cat"; then
AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
dnl Transform the SED scripts while copying because some dumb SEDs
dnl cannot handle comments.
sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
fi
dnl po2tbl.sed is always needed.
sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
$srcdir/po2tbl.sed.in > po2tbl.sed
fi
dnl In the intl/Makefile.in we have a special dependency which makes
dnl only sense for gettext. We comment this out for non-gettext
dnl packages.
if test "$PACKAGE" = "gettext"; then
GT_NO="#NO#"
GT_YES=
else
GT_NO=
GT_YES="#YES#"
fi
AC_SUBST(GT_NO)
AC_SUBST(GT_YES)
MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
AC_SUBST(MKINSTALLDIRS)
dnl *** For now the libtool support in intl/Makefile is not for real.
l=
AC_SUBST(l)
dnl Generate list of files to be processed by xgettext which will
dnl be included in po/Makefile. But only do this if the po directory
dnl exists in srcdir.
if test -d $srcdir/po; then
test -d po || mkdir po
if test "x$srcdir" != "x."; then
if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
posrcprefix="$srcdir/"
else
posrcprefix="../$srcdir/"
fi
else
posrcprefix="../"
fi
rm -f po/POTFILES
sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
< $srcdir/po/POTFILES.in > po/POTFILES
fi
])
# Search path for a program which passes the given test.
# Ulrich Drepper <drepper@cygnus.com>, 1996.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
AC_DEFUN(AM_PATH_PROG_WITH_TEST,
[# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=[$]2
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL(ac_cv_path_$1,
[case "[$]$1" in
/*)
ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in ifelse([$5], , $PATH, [$5]); do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if [$3]; then
ac_cv_path_$1="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
dnl If no 4th arg is given, leave the cache variable unset,
dnl so AC_PATH_PROGS will keep looking.
ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
])dnl
;;
esac])dnl
$1="$ac_cv_path_$1"
if test -n "[$]$1"; then
AC_MSG_RESULT([$]$1)
else
AC_MSG_RESULT(no)
fi
AC_SUBST($1)dnl
])
# Check whether LC_MESSAGES is available in <locale.h>.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
AC_DEFUN(AM_LC_MESSAGES,
[if test $ac_cv_header_locale_h = yes; then
AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
[AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
if test $am_cv_val_LC_MESSAGES = yes; then
AC_DEFINE(HAVE_LC_MESSAGES, 1,
[Define if your locale.h file contains LC_MESSAGES.])
fi
fi])
# Add --enable-maintainer-mode option to configure.
# From Jim Meyering

1172
binutils/configure vendored

File diff suppressed because it is too large Load Diff

View File

@ -1,3 +1,9 @@
2000-08-31 Alexandre Oliva <aoliva@redhat.com>
* acinclude.m4: Include libtool and gettext macros from the
top level.
* aclocal.m4, configure: Rebuilt.
2000-08-30 Mark Hatle <mhatle@mvista.com>
* config/tc-ppc.c (md_parse_option): Recognize -m405.

View File

@ -54,3 +54,19 @@ for _gas_uniq_i in _gas_uniq_dummy [$]_gas_uniq_list ; do
done
$1=[$]_gas_uniq_newlist
])dnl
sinclude(../libtool.m4)
dnl The lines below arrange for aclocal not to bring libtool.m4
dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
dnl to add a definition of LIBTOOL to Makefile.in.
ifelse(yes,no,[
AC_DEFUN([AM_PROG_LIBTOOL],)
AC_DEFUN([AC_CHECK_LIBM],)
AC_SUBST(LIBTOOL)
])
sinclude(../gettext.m4)
ifelse(yes,no,[
AC_DEFUN([CY_WITH_NLS],)
AC_SUBST(INTLLIBS)
])

765
gas/aclocal.m4 vendored
View File

@ -67,6 +67,22 @@ done
$1=[$]_gas_uniq_newlist
])dnl
sinclude(../libtool.m4)
dnl The lines below arrange for aclocal not to bring libtool.m4
dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
dnl to add a definition of LIBTOOL to Makefile.in.
ifelse(yes,no,[
AC_DEFUN([AM_PROG_LIBTOOL],)
AC_DEFUN([AC_CHECK_LIBM],)
AC_SUBST(LIBTOOL)
])
sinclude(../gettext.m4)
ifelse(yes,no,[
AC_DEFUN([CY_WITH_NLS],)
AC_SUBST(INTLLIBS)
])
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
@ -159,410 +175,6 @@ else
fi
AC_SUBST($1)])
# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Save cache, so that ltconfig can load it
AC_CACHE_SAVE
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])
AC_DEFUN(AC_LIBTOOL_SETUP,
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[libtool_flags="$libtool_flags --enable-win32-dll"])
AC_ARG_ENABLE(libtool-lock,
[ --disable-libtool-lock avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$host" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw*)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
])
esac
])
# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_SHARED, [dnl
define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_STATIC, [dnl
define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])
AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
fi])
])
# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
break
else
ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
])
# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case "$host" in
*-*-beos* | *-*-cygwin*)
# These system don't have libm
;;
*-ncr-sysv4.3*)
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
*)
AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library, adds --enable-ltdl-convenience to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library, and adds --enable-ltdl-install to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_CHECK_LIB(ltdl, main,
[test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
[if test x"$enable_ltdl_install" = xno; then
AC_MSG_WARN([libltdl not installed, but installation disabled])
else
enable_ltdl_install=yes
fi
])
if test x"$enable_ltdl_install" = x"yes"; then
ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
else
ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
LIBLTDL="-lltdl"
INCLTDL=
fi
])
dnl old names
AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl
# Like AC_CONFIG_HEADER, but automatically create stamp file.
AC_DEFUN(AM_CONFIG_HEADER,
@ -595,351 +207,6 @@ AC_CHECK_PROGS(LEX, flex lex, "$missing_dir/missing flex")
AC_PROG_LEX
AC_DECL_YYTEXT])
# This file is derived from `gettext.m4'. The difference is that the
# included macros assume Cygnus-style source and build trees.
# Macro to add for using GNU gettext.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 3
AC_DEFUN(CY_WITH_NLS,
[AC_MSG_CHECKING([whether NLS is requested])
dnl Default is enabled NLS
AC_ARG_ENABLE(nls,
[ --disable-nls do not use Native Language Support],
USE_NLS=$enableval, USE_NLS=yes)
AC_MSG_RESULT($USE_NLS)
AC_SUBST(USE_NLS)
USE_INCLUDED_LIBINTL=no
dnl If we use NLS figure out what method
if test "$USE_NLS" = "yes"; then
AC_DEFINE(ENABLE_NLS, 1, [Define to 1 if NLS is requested])
AC_MSG_CHECKING([whether included gettext is requested])
AC_ARG_WITH(included-gettext,
[ --with-included-gettext use the GNU gettext library included here],
nls_cv_force_use_gnu_gettext=$withval,
nls_cv_force_use_gnu_gettext=no)
AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
dnl User does not insist on using GNU NLS library. Figure out what
dnl to use. If gettext or catgets are available (in this order) we
dnl use this. Else we have to fall back to GNU NLS library.
dnl catgets is only used if permitted by option --with-catgets.
nls_cv_header_intl=
nls_cv_header_libgt=
CATOBJEXT=NONE
AC_CHECK_HEADER(libintl.h,
[AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
[AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
if test "$gt_cv_func_gettext_libc" != "yes"; then
AC_CHECK_LIB(intl, bindtextdomain,
[AC_CACHE_CHECK([for gettext in libintl],
gt_cv_func_gettext_libintl,
[AC_TRY_LINK([], [return (int) gettext ("")],
gt_cv_func_gettext_libintl=yes,
gt_cv_func_gettext_libintl=no)])])
fi
if test "$gt_cv_func_gettext_libc" = "yes" \
|| test "$gt_cv_func_gettext_libintl" = "yes"; then
AC_DEFINE(HAVE_GETTEXT, 1,
[Define as 1 if you have gettext and don't want to use GNU gettext.])
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
if test "$MSGFMT" != "no"; then
AC_CHECK_FUNCS(dcgettext)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
return _nl_msg_cat_cntr],
[CATOBJEXT=.gmo
DATADIRNAME=share],
[CATOBJEXT=.mo
DATADIRNAME=lib])
INSTOBJEXT=.mo
fi
fi
])
dnl In the standard gettext, we would now check for catgets.
dnl However, we never want to use catgets for our releases.
if test "$CATOBJEXT" = "NONE"; then
dnl Neither gettext nor catgets in included in the C library.
dnl Fall back on GNU gettext library.
nls_cv_use_gnu_gettext=yes
fi
fi
if test "$nls_cv_use_gnu_gettext" = "yes"; then
dnl Mark actions used to generate GNU NLS library.
INTLOBJS="\$(GETTOBJS)"
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_SUBST(MSGFMT)
USE_INCLUDED_LIBINTL=yes
CATOBJEXT=.gmo
INSTOBJEXT=.mo
DATADIRNAME=share
INTLDEPS='$(top_builddir)/../intl/libintl.a'
INTLLIBS=$INTLDEPS
LIBS=`echo $LIBS | sed -e 's/-lintl//'`
nls_cv_header_intl=libintl.h
nls_cv_header_libgt=libgettext.h
fi
dnl Test whether we really found GNU xgettext.
if test "$XGETTEXT" != ":"; then
dnl If it is no GNU xgettext we define it as : so that the
dnl Makefiles still can work.
if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
: ;
else
AC_MSG_RESULT(
[found xgettext programs is not GNU xgettext; ignore it])
XGETTEXT=":"
fi
fi
# We need to process the po/ directory.
POSUB=po
else
DATADIRNAME=share
nls_cv_header_intl=libintl.h
nls_cv_header_libgt=libgettext.h
fi
# If this is used in GNU gettext we have to set USE_NLS to `yes'
# because some of the sources are only built for this goal.
if test "$PACKAGE" = gettext; then
USE_NLS=yes
USE_INCLUDED_LIBINTL=yes
fi
dnl These rules are solely for the distribution goal. While doing this
dnl we only have to keep exactly one list of the available catalogs
dnl in configure.in.
for lang in $ALL_LINGUAS; do
GMOFILES="$GMOFILES $lang.gmo"
POFILES="$POFILES $lang.po"
done
dnl Make all variables we use known to autoconf.
AC_SUBST(USE_INCLUDED_LIBINTL)
AC_SUBST(CATALOGS)
AC_SUBST(CATOBJEXT)
AC_SUBST(DATADIRNAME)
AC_SUBST(GMOFILES)
AC_SUBST(INSTOBJEXT)
AC_SUBST(INTLDEPS)
AC_SUBST(INTLLIBS)
AC_SUBST(INTLOBJS)
AC_SUBST(POFILES)
AC_SUBST(POSUB)
])
AC_DEFUN(CY_GNU_GETTEXT,
[AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_ISC_POSIX])dnl
AC_REQUIRE([AC_HEADER_STDC])dnl
AC_REQUIRE([AC_C_CONST])dnl
AC_REQUIRE([AC_C_INLINE])dnl
AC_REQUIRE([AC_TYPE_OFF_T])dnl
AC_REQUIRE([AC_TYPE_SIZE_T])dnl
AC_REQUIRE([AC_FUNC_ALLOCA])dnl
AC_REQUIRE([AC_FUNC_MMAP])dnl
AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
unistd.h values.h sys/param.h])
AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
__argz_count __argz_stringify __argz_next])
if test "${ac_cv_func_stpcpy+set}" != "set"; then
AC_CHECK_FUNCS(stpcpy)
fi
if test "${ac_cv_func_stpcpy}" = "yes"; then
AC_DEFINE(HAVE_STPCPY, 1, [Define if you have the stpcpy function])
fi
AM_LC_MESSAGES
CY_WITH_NLS
if test "x$CATOBJEXT" != "x"; then
if test "x$ALL_LINGUAS" = "x"; then
LINGUAS=
else
AC_MSG_CHECKING(for catalogs to be installed)
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
*$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
esac
done
LINGUAS=$NEW_LINGUAS
AC_MSG_RESULT($LINGUAS)
fi
dnl Construct list of names of catalog files to be constructed.
if test -n "$LINGUAS"; then
for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
fi
fi
dnl The reference to <locale.h> in the installed <libintl.h> file
dnl must be resolved because we cannot expect the users of this
dnl to define HAVE_LOCALE_H.
if test $ac_cv_header_locale_h = yes; then
INCLUDE_LOCALE_H="#include <locale.h>"
else
INCLUDE_LOCALE_H="\
/* The system does not provide the header <locale.h>. Take care yourself. */"
fi
AC_SUBST(INCLUDE_LOCALE_H)
dnl Determine which catalog format we have (if any is needed)
dnl For now we know about two different formats:
dnl Linux libc-5 and the normal X/Open format
if test -f $srcdir/po2tbl.sed.in; then
if test "$CATOBJEXT" = ".cat"; then
AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
dnl Transform the SED scripts while copying because some dumb SEDs
dnl cannot handle comments.
sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
fi
dnl po2tbl.sed is always needed.
sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
$srcdir/po2tbl.sed.in > po2tbl.sed
fi
dnl In the intl/Makefile.in we have a special dependency which makes
dnl only sense for gettext. We comment this out for non-gettext
dnl packages.
if test "$PACKAGE" = "gettext"; then
GT_NO="#NO#"
GT_YES=
else
GT_NO=
GT_YES="#YES#"
fi
AC_SUBST(GT_NO)
AC_SUBST(GT_YES)
MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
AC_SUBST(MKINSTALLDIRS)
dnl *** For now the libtool support in intl/Makefile is not for real.
l=
AC_SUBST(l)
dnl Generate list of files to be processed by xgettext which will
dnl be included in po/Makefile. But only do this if the po directory
dnl exists in srcdir.
if test -d $srcdir/po; then
test -d po || mkdir po
if test "x$srcdir" != "x."; then
if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
posrcprefix="$srcdir/"
else
posrcprefix="../$srcdir/"
fi
else
posrcprefix="../"
fi
rm -f po/POTFILES
sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
< $srcdir/po/POTFILES.in > po/POTFILES
fi
])
# Search path for a program which passes the given test.
# Ulrich Drepper <drepper@cygnus.com>, 1996.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
AC_DEFUN(AM_PATH_PROG_WITH_TEST,
[# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=[$]2
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL(ac_cv_path_$1,
[case "[$]$1" in
/*)
ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in ifelse([$5], , $PATH, [$5]); do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if [$3]; then
ac_cv_path_$1="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
dnl If no 4th arg is given, leave the cache variable unset,
dnl so AC_PATH_PROGS will keep looking.
ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
])dnl
;;
esac])dnl
$1="$ac_cv_path_$1"
if test -n "[$]$1"; then
AC_MSG_RESULT([$]$1)
else
AC_MSG_RESULT(no)
fi
AC_SUBST($1)dnl
])
# Check whether LC_MESSAGES is available in <locale.h>.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
AC_DEFUN(AM_LC_MESSAGES,
[if test $ac_cv_header_locale_h = yes; then
AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
[AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
if test $am_cv_val_LC_MESSAGES = yes; then
AC_DEFINE(HAVE_LC_MESSAGES, 1,
[Define if your locale.h file contains LC_MESSAGES.])
fi
fi])
# Add --enable-maintainer-mode option to configure.
# From Jim Meyering

1150
gas/configure vendored

File diff suppressed because it is too large Load Diff

View File

@ -1,3 +1,9 @@
2000-08-31 Alexandre Oliva <aoliva@redhat.com>
* acinclude.m4: Include libtool and gettext macros from the
top level.
* aclocal.m4, configure: Rebuilt.
2000-07-26 Nick Clifton <nickc@cygnus.com>
* bb_exit_func.c: Assign copyright to FSF. Note that David

14
gprof/acinclude.m4 Normal file
View File

@ -0,0 +1,14 @@
sinclude(../libtool.m4)
dnl The lines below arrange for aclocal not to bring libtool.m4
dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
dnl to add a definition of LIBTOOL to Makefile.in.
ifelse(yes,no,[
AC_DEFUN([AM_PROG_LIBTOOL],)
AC_SUBST(LIBTOOL)
])
sinclude(../gettext.m4)
ifelse(yes,no,[
AC_DEFUN([CY_WITH_NLS],)
AC_SUBST(INTLLIBS)
])

769
gprof/aclocal.m4 vendored
View File

@ -10,6 +10,21 @@ dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
dnl PARTICULAR PURPOSE.
sinclude(../libtool.m4)
dnl The lines below arrange for aclocal not to bring libtool.m4
dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
dnl to add a definition of LIBTOOL to Makefile.in.
ifelse(yes,no,[
AC_DEFUN([AM_PROG_LIBTOOL],)
AC_SUBST(LIBTOOL)
])
sinclude(../gettext.m4)
ifelse(yes,no,[
AC_DEFUN([CY_WITH_NLS],)
AC_SUBST(INTLLIBS)
])
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
@ -102,415 +117,6 @@ else
fi
AC_SUBST($1)])
# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Save cache, so that ltconfig can load it
AC_CACHE_SAVE
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])
AC_DEFUN(AC_LIBTOOL_SETUP,
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
case "$target" in
NONE) lt_target="$host" ;;
*) lt_target="$target" ;;
esac
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[libtool_flags="$libtool_flags --enable-win32-dll"])
AC_ARG_ENABLE(libtool-lock,
[ --disable-libtool-lock avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw*)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
])
esac
])
# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_SHARED, [dnl
define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_STATIC, [dnl
define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])
AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
fi])
])
# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
break
else
ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
])
# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case "$lt_target" in
*-*-beos* | *-*-cygwin*)
# These system don't have libm
;;
*-ncr-sysv4.3*)
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
*)
AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library, adds --enable-ltdl-convenience to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library, and adds --enable-ltdl-install to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_CHECK_LIB(ltdl, main,
[test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
[if test x"$enable_ltdl_install" = xno; then
AC_MSG_WARN([libltdl not installed, but installation disabled])
else
enable_ltdl_install=yes
fi
])
if test x"$enable_ltdl_install" = x"yes"; then
ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
else
ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
LIBLTDL="-lltdl"
INCLTDL=
fi
])
dnl old names
AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl
# Like AC_CONFIG_HEADER, but automatically create stamp file.
AC_DEFUN(AM_CONFIG_HEADER,
@ -534,351 +140,6 @@ for am_file in <<$1>>; do
done<<>>dnl>>)
changequote([,]))])
# This file is derived from `gettext.m4'. The difference is that the
# included macros assume Cygnus-style source and build trees.
# Macro to add for using GNU gettext.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 3
AC_DEFUN(CY_WITH_NLS,
[AC_MSG_CHECKING([whether NLS is requested])
dnl Default is enabled NLS
AC_ARG_ENABLE(nls,
[ --disable-nls do not use Native Language Support],
USE_NLS=$enableval, USE_NLS=yes)
AC_MSG_RESULT($USE_NLS)
AC_SUBST(USE_NLS)
USE_INCLUDED_LIBINTL=no
dnl If we use NLS figure out what method
if test "$USE_NLS" = "yes"; then
AC_DEFINE(ENABLE_NLS, 1, [Define to 1 if NLS is requested])
AC_MSG_CHECKING([whether included gettext is requested])
AC_ARG_WITH(included-gettext,
[ --with-included-gettext use the GNU gettext library included here],
nls_cv_force_use_gnu_gettext=$withval,
nls_cv_force_use_gnu_gettext=no)
AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
dnl User does not insist on using GNU NLS library. Figure out what
dnl to use. If gettext or catgets are available (in this order) we
dnl use this. Else we have to fall back to GNU NLS library.
dnl catgets is only used if permitted by option --with-catgets.
nls_cv_header_intl=
nls_cv_header_libgt=
CATOBJEXT=NONE
AC_CHECK_HEADER(libintl.h,
[AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
[AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
if test "$gt_cv_func_gettext_libc" != "yes"; then
AC_CHECK_LIB(intl, bindtextdomain,
[AC_CACHE_CHECK([for gettext in libintl],
gt_cv_func_gettext_libintl,
[AC_TRY_LINK([], [return (int) gettext ("")],
gt_cv_func_gettext_libintl=yes,
gt_cv_func_gettext_libintl=no)])])
fi
if test "$gt_cv_func_gettext_libc" = "yes" \
|| test "$gt_cv_func_gettext_libintl" = "yes"; then
AC_DEFINE(HAVE_GETTEXT, 1,
[Define as 1 if you have gettext and don't want to use GNU gettext.])
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
if test "$MSGFMT" != "no"; then
AC_CHECK_FUNCS(dcgettext)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
return _nl_msg_cat_cntr],
[CATOBJEXT=.gmo
DATADIRNAME=share],
[CATOBJEXT=.mo
DATADIRNAME=lib])
INSTOBJEXT=.mo
fi
fi
])
dnl In the standard gettext, we would now check for catgets.
dnl However, we never want to use catgets for our releases.
if test "$CATOBJEXT" = "NONE"; then
dnl Neither gettext nor catgets in included in the C library.
dnl Fall back on GNU gettext library.
nls_cv_use_gnu_gettext=yes
fi
fi
if test "$nls_cv_use_gnu_gettext" = "yes"; then
dnl Mark actions used to generate GNU NLS library.
INTLOBJS="\$(GETTOBJS)"
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_SUBST(MSGFMT)
USE_INCLUDED_LIBINTL=yes
CATOBJEXT=.gmo
INSTOBJEXT=.mo
DATADIRNAME=share
INTLDEPS='$(top_builddir)/../intl/libintl.a'
INTLLIBS=$INTLDEPS
LIBS=`echo $LIBS | sed -e 's/-lintl//'`
nls_cv_header_intl=libintl.h
nls_cv_header_libgt=libgettext.h
fi
dnl Test whether we really found GNU xgettext.
if test "$XGETTEXT" != ":"; then
dnl If it is no GNU xgettext we define it as : so that the
dnl Makefiles still can work.
if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
: ;
else
AC_MSG_RESULT(
[found xgettext programs is not GNU xgettext; ignore it])
XGETTEXT=":"
fi
fi
# We need to process the po/ directory.
POSUB=po
else
DATADIRNAME=share
nls_cv_header_intl=libintl.h
nls_cv_header_libgt=libgettext.h
fi
# If this is used in GNU gettext we have to set USE_NLS to `yes'
# because some of the sources are only built for this goal.
if test "$PACKAGE" = gettext; then
USE_NLS=yes
USE_INCLUDED_LIBINTL=yes
fi
dnl These rules are solely for the distribution goal. While doing this
dnl we only have to keep exactly one list of the available catalogs
dnl in configure.in.
for lang in $ALL_LINGUAS; do
GMOFILES="$GMOFILES $lang.gmo"
POFILES="$POFILES $lang.po"
done
dnl Make all variables we use known to autoconf.
AC_SUBST(USE_INCLUDED_LIBINTL)
AC_SUBST(CATALOGS)
AC_SUBST(CATOBJEXT)
AC_SUBST(DATADIRNAME)
AC_SUBST(GMOFILES)
AC_SUBST(INSTOBJEXT)
AC_SUBST(INTLDEPS)
AC_SUBST(INTLLIBS)
AC_SUBST(INTLOBJS)
AC_SUBST(POFILES)
AC_SUBST(POSUB)
])
AC_DEFUN(CY_GNU_GETTEXT,
[AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_ISC_POSIX])dnl
AC_REQUIRE([AC_HEADER_STDC])dnl
AC_REQUIRE([AC_C_CONST])dnl
AC_REQUIRE([AC_C_INLINE])dnl
AC_REQUIRE([AC_TYPE_OFF_T])dnl
AC_REQUIRE([AC_TYPE_SIZE_T])dnl
AC_REQUIRE([AC_FUNC_ALLOCA])dnl
AC_REQUIRE([AC_FUNC_MMAP])dnl
AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
unistd.h values.h sys/param.h])
AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
__argz_count __argz_stringify __argz_next])
if test "${ac_cv_func_stpcpy+set}" != "set"; then
AC_CHECK_FUNCS(stpcpy)
fi
if test "${ac_cv_func_stpcpy}" = "yes"; then
AC_DEFINE(HAVE_STPCPY, 1, [Define if you have the stpcpy function])
fi
AM_LC_MESSAGES
CY_WITH_NLS
if test "x$CATOBJEXT" != "x"; then
if test "x$ALL_LINGUAS" = "x"; then
LINGUAS=
else
AC_MSG_CHECKING(for catalogs to be installed)
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
*$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
esac
done
LINGUAS=$NEW_LINGUAS
AC_MSG_RESULT($LINGUAS)
fi
dnl Construct list of names of catalog files to be constructed.
if test -n "$LINGUAS"; then
for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
fi
fi
dnl The reference to <locale.h> in the installed <libintl.h> file
dnl must be resolved because we cannot expect the users of this
dnl to define HAVE_LOCALE_H.
if test $ac_cv_header_locale_h = yes; then
INCLUDE_LOCALE_H="#include <locale.h>"
else
INCLUDE_LOCALE_H="\
/* The system does not provide the header <locale.h>. Take care yourself. */"
fi
AC_SUBST(INCLUDE_LOCALE_H)
dnl Determine which catalog format we have (if any is needed)
dnl For now we know about two different formats:
dnl Linux libc-5 and the normal X/Open format
if test -f $srcdir/po2tbl.sed.in; then
if test "$CATOBJEXT" = ".cat"; then
AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
dnl Transform the SED scripts while copying because some dumb SEDs
dnl cannot handle comments.
sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
fi
dnl po2tbl.sed is always needed.
sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
$srcdir/po2tbl.sed.in > po2tbl.sed
fi
dnl In the intl/Makefile.in we have a special dependency which makes
dnl only sense for gettext. We comment this out for non-gettext
dnl packages.
if test "$PACKAGE" = "gettext"; then
GT_NO="#NO#"
GT_YES=
else
GT_NO=
GT_YES="#YES#"
fi
AC_SUBST(GT_NO)
AC_SUBST(GT_YES)
MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
AC_SUBST(MKINSTALLDIRS)
dnl *** For now the libtool support in intl/Makefile is not for real.
l=
AC_SUBST(l)
dnl Generate list of files to be processed by xgettext which will
dnl be included in po/Makefile. But only do this if the po directory
dnl exists in srcdir.
if test -d $srcdir/po; then
test -d po || mkdir po
if test "x$srcdir" != "x."; then
if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
posrcprefix="$srcdir/"
else
posrcprefix="../$srcdir/"
fi
else
posrcprefix="../"
fi
rm -f po/POTFILES
sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
< $srcdir/po/POTFILES.in > po/POTFILES
fi
])
# Search path for a program which passes the given test.
# Ulrich Drepper <drepper@cygnus.com>, 1996.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
AC_DEFUN(AM_PATH_PROG_WITH_TEST,
[# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=[$]2
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL(ac_cv_path_$1,
[case "[$]$1" in
/*)
ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in ifelse([$5], , $PATH, [$5]); do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if [$3]; then
ac_cv_path_$1="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
dnl If no 4th arg is given, leave the cache variable unset,
dnl so AC_PATH_PROGS will keep looking.
ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
])dnl
;;
esac])dnl
$1="$ac_cv_path_$1"
if test -n "[$]$1"; then
AC_MSG_RESULT([$]$1)
else
AC_MSG_RESULT(no)
fi
AC_SUBST($1)dnl
])
# Check whether LC_MESSAGES is available in <locale.h>.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
AC_DEFUN(AM_LC_MESSAGES,
[if test $ac_cv_header_locale_h = yes; then
AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
[AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
if test $am_cv_val_LC_MESSAGES = yes; then
AC_DEFINE(HAVE_LC_MESSAGES, 1,
[Define if your locale.h file contains LC_MESSAGES.])
fi
fi])
# Add --enable-maintainer-mode option to configure.
# From Jim Meyering

1050
gprof/configure vendored

File diff suppressed because it is too large Load Diff

View File

@ -1,3 +1,9 @@
2000-08-31 Alexandre Oliva <aoliva@redhat.com>
* acinclude.m4: Include libtool and gettext macros from the
top level.
* aclocal.m4, configure: Rebuilt.
2000-08-25 Nick Clifton <nickc@redhat.com>
* ldlang.c (open_output): When choosing the target for a

View File

@ -1 +1,16 @@
sinclude(../bfd/acinclude.m4)
dnl sinclude(../libtool.m4) already included in bfd/acinclude.m4
dnl The lines below arrange for aclocal not to bring libtool.m4
dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
dnl to add a definition of LIBTOOL to Makefile.in.
ifelse(yes,no,[
AC_DEFUN([AM_PROG_LIBTOOL],)
AC_SUBST(LIBTOOL)
])
dnl sinclude(../gettext.m4) already included in bfd/acinclude.m4
ifelse(yes,no,[
AC_DEFUN([CY_WITH_NLS],)
AC_SUBST(INTLLIBS)
])

769
ld/aclocal.m4 vendored
View File

@ -12,6 +12,21 @@ dnl PARTICULAR PURPOSE.
sinclude(../bfd/acinclude.m4)
dnl sinclude(../libtool.m4) already included in bfd/acinclude.m4
dnl The lines below arrange for aclocal not to bring libtool.m4
dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
dnl to add a definition of LIBTOOL to Makefile.in.
ifelse(yes,no,[
AC_DEFUN([AM_PROG_LIBTOOL],)
AC_SUBST(LIBTOOL)
])
dnl sinclude(../gettext.m4) already included in bfd/acinclude.m4
ifelse(yes,no,[
AC_DEFUN([CY_WITH_NLS],)
AC_SUBST(INTLLIBS)
])
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
@ -104,415 +119,6 @@ else
fi
AC_SUBST($1)])
# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Save cache, so that ltconfig can load it
AC_CACHE_SAVE
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])
AC_DEFUN(AC_LIBTOOL_SETUP,
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
case "$target" in
NONE) lt_target="$host" ;;
*) lt_target="$target" ;;
esac
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[libtool_flags="$libtool_flags --enable-win32-dll"])
AC_ARG_ENABLE(libtool-lock,
[ --disable-libtool-lock avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$lt_target" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw*)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
])
esac
])
# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_SHARED, [dnl
define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_STATIC, [dnl
define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])
AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
fi])
])
# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
break
else
ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
])
# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case "$lt_target" in
*-*-beos* | *-*-cygwin*)
# These system don't have libm
;;
*-ncr-sysv4.3*)
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
*)
AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library, adds --enable-ltdl-convenience to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library, and adds --enable-ltdl-install to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_CHECK_LIB(ltdl, main,
[test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
[if test x"$enable_ltdl_install" = xno; then
AC_MSG_WARN([libltdl not installed, but installation disabled])
else
enable_ltdl_install=yes
fi
])
if test x"$enable_ltdl_install" = x"yes"; then
ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
else
ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
LIBLTDL="-lltdl"
INCLTDL=
fi
])
dnl old names
AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl
# Like AC_CONFIG_HEADER, but automatically create stamp file.
AC_DEFUN(AM_CONFIG_HEADER,
@ -536,351 +142,6 @@ for am_file in <<$1>>; do
done<<>>dnl>>)
changequote([,]))])
# This file is derived from `gettext.m4'. The difference is that the
# included macros assume Cygnus-style source and build trees.
# Macro to add for using GNU gettext.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 3
AC_DEFUN(CY_WITH_NLS,
[AC_MSG_CHECKING([whether NLS is requested])
dnl Default is enabled NLS
AC_ARG_ENABLE(nls,
[ --disable-nls do not use Native Language Support],
USE_NLS=$enableval, USE_NLS=yes)
AC_MSG_RESULT($USE_NLS)
AC_SUBST(USE_NLS)
USE_INCLUDED_LIBINTL=no
dnl If we use NLS figure out what method
if test "$USE_NLS" = "yes"; then
AC_DEFINE(ENABLE_NLS, 1, [Define to 1 if NLS is requested])
AC_MSG_CHECKING([whether included gettext is requested])
AC_ARG_WITH(included-gettext,
[ --with-included-gettext use the GNU gettext library included here],
nls_cv_force_use_gnu_gettext=$withval,
nls_cv_force_use_gnu_gettext=no)
AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
dnl User does not insist on using GNU NLS library. Figure out what
dnl to use. If gettext or catgets are available (in this order) we
dnl use this. Else we have to fall back to GNU NLS library.
dnl catgets is only used if permitted by option --with-catgets.
nls_cv_header_intl=
nls_cv_header_libgt=
CATOBJEXT=NONE
AC_CHECK_HEADER(libintl.h,
[AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
[AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
if test "$gt_cv_func_gettext_libc" != "yes"; then
AC_CHECK_LIB(intl, bindtextdomain,
[AC_CACHE_CHECK([for gettext in libintl],
gt_cv_func_gettext_libintl,
[AC_TRY_LINK([], [return (int) gettext ("")],
gt_cv_func_gettext_libintl=yes,
gt_cv_func_gettext_libintl=no)])])
fi
if test "$gt_cv_func_gettext_libc" = "yes" \
|| test "$gt_cv_func_gettext_libintl" = "yes"; then
AC_DEFINE(HAVE_GETTEXT, 1,
[Define as 1 if you have gettext and don't want to use GNU gettext.])
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
if test "$MSGFMT" != "no"; then
AC_CHECK_FUNCS(dcgettext)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
return _nl_msg_cat_cntr],
[CATOBJEXT=.gmo
DATADIRNAME=share],
[CATOBJEXT=.mo
DATADIRNAME=lib])
INSTOBJEXT=.mo
fi
fi
])
dnl In the standard gettext, we would now check for catgets.
dnl However, we never want to use catgets for our releases.
if test "$CATOBJEXT" = "NONE"; then
dnl Neither gettext nor catgets in included in the C library.
dnl Fall back on GNU gettext library.
nls_cv_use_gnu_gettext=yes
fi
fi
if test "$nls_cv_use_gnu_gettext" = "yes"; then
dnl Mark actions used to generate GNU NLS library.
INTLOBJS="\$(GETTOBJS)"
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_SUBST(MSGFMT)
USE_INCLUDED_LIBINTL=yes
CATOBJEXT=.gmo
INSTOBJEXT=.mo
DATADIRNAME=share
INTLDEPS='$(top_builddir)/../intl/libintl.a'
INTLLIBS=$INTLDEPS
LIBS=`echo $LIBS | sed -e 's/-lintl//'`
nls_cv_header_intl=libintl.h
nls_cv_header_libgt=libgettext.h
fi
dnl Test whether we really found GNU xgettext.
if test "$XGETTEXT" != ":"; then
dnl If it is no GNU xgettext we define it as : so that the
dnl Makefiles still can work.
if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
: ;
else
AC_MSG_RESULT(
[found xgettext programs is not GNU xgettext; ignore it])
XGETTEXT=":"
fi
fi
# We need to process the po/ directory.
POSUB=po
else
DATADIRNAME=share
nls_cv_header_intl=libintl.h
nls_cv_header_libgt=libgettext.h
fi
# If this is used in GNU gettext we have to set USE_NLS to `yes'
# because some of the sources are only built for this goal.
if test "$PACKAGE" = gettext; then
USE_NLS=yes
USE_INCLUDED_LIBINTL=yes
fi
dnl These rules are solely for the distribution goal. While doing this
dnl we only have to keep exactly one list of the available catalogs
dnl in configure.in.
for lang in $ALL_LINGUAS; do
GMOFILES="$GMOFILES $lang.gmo"
POFILES="$POFILES $lang.po"
done
dnl Make all variables we use known to autoconf.
AC_SUBST(USE_INCLUDED_LIBINTL)
AC_SUBST(CATALOGS)
AC_SUBST(CATOBJEXT)
AC_SUBST(DATADIRNAME)
AC_SUBST(GMOFILES)
AC_SUBST(INSTOBJEXT)
AC_SUBST(INTLDEPS)
AC_SUBST(INTLLIBS)
AC_SUBST(INTLOBJS)
AC_SUBST(POFILES)
AC_SUBST(POSUB)
])
AC_DEFUN(CY_GNU_GETTEXT,
[AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_ISC_POSIX])dnl
AC_REQUIRE([AC_HEADER_STDC])dnl
AC_REQUIRE([AC_C_CONST])dnl
AC_REQUIRE([AC_C_INLINE])dnl
AC_REQUIRE([AC_TYPE_OFF_T])dnl
AC_REQUIRE([AC_TYPE_SIZE_T])dnl
AC_REQUIRE([AC_FUNC_ALLOCA])dnl
AC_REQUIRE([AC_FUNC_MMAP])dnl
AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
unistd.h values.h sys/param.h])
AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
__argz_count __argz_stringify __argz_next])
if test "${ac_cv_func_stpcpy+set}" != "set"; then
AC_CHECK_FUNCS(stpcpy)
fi
if test "${ac_cv_func_stpcpy}" = "yes"; then
AC_DEFINE(HAVE_STPCPY, 1, [Define if you have the stpcpy function])
fi
AM_LC_MESSAGES
CY_WITH_NLS
if test "x$CATOBJEXT" != "x"; then
if test "x$ALL_LINGUAS" = "x"; then
LINGUAS=
else
AC_MSG_CHECKING(for catalogs to be installed)
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
*$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
esac
done
LINGUAS=$NEW_LINGUAS
AC_MSG_RESULT($LINGUAS)
fi
dnl Construct list of names of catalog files to be constructed.
if test -n "$LINGUAS"; then
for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
fi
fi
dnl The reference to <locale.h> in the installed <libintl.h> file
dnl must be resolved because we cannot expect the users of this
dnl to define HAVE_LOCALE_H.
if test $ac_cv_header_locale_h = yes; then
INCLUDE_LOCALE_H="#include <locale.h>"
else
INCLUDE_LOCALE_H="\
/* The system does not provide the header <locale.h>. Take care yourself. */"
fi
AC_SUBST(INCLUDE_LOCALE_H)
dnl Determine which catalog format we have (if any is needed)
dnl For now we know about two different formats:
dnl Linux libc-5 and the normal X/Open format
if test -f $srcdir/po2tbl.sed.in; then
if test "$CATOBJEXT" = ".cat"; then
AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
dnl Transform the SED scripts while copying because some dumb SEDs
dnl cannot handle comments.
sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
fi
dnl po2tbl.sed is always needed.
sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
$srcdir/po2tbl.sed.in > po2tbl.sed
fi
dnl In the intl/Makefile.in we have a special dependency which makes
dnl only sense for gettext. We comment this out for non-gettext
dnl packages.
if test "$PACKAGE" = "gettext"; then
GT_NO="#NO#"
GT_YES=
else
GT_NO=
GT_YES="#YES#"
fi
AC_SUBST(GT_NO)
AC_SUBST(GT_YES)
MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
AC_SUBST(MKINSTALLDIRS)
dnl *** For now the libtool support in intl/Makefile is not for real.
l=
AC_SUBST(l)
dnl Generate list of files to be processed by xgettext which will
dnl be included in po/Makefile. But only do this if the po directory
dnl exists in srcdir.
if test -d $srcdir/po; then
test -d po || mkdir po
if test "x$srcdir" != "x."; then
if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
posrcprefix="$srcdir/"
else
posrcprefix="../$srcdir/"
fi
else
posrcprefix="../"
fi
rm -f po/POTFILES
sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
< $srcdir/po/POTFILES.in > po/POTFILES
fi
])
# Search path for a program which passes the given test.
# Ulrich Drepper <drepper@cygnus.com>, 1996.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
AC_DEFUN(AM_PATH_PROG_WITH_TEST,
[# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=[$]2
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL(ac_cv_path_$1,
[case "[$]$1" in
/*)
ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in ifelse([$5], , $PATH, [$5]); do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if [$3]; then
ac_cv_path_$1="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
dnl If no 4th arg is given, leave the cache variable unset,
dnl so AC_PATH_PROGS will keep looking.
ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
])dnl
;;
esac])dnl
$1="$ac_cv_path_$1"
if test -n "[$]$1"; then
AC_MSG_RESULT([$]$1)
else
AC_MSG_RESULT(no)
fi
AC_SUBST($1)dnl
])
# Check whether LC_MESSAGES is available in <locale.h>.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
AC_DEFUN(AM_LC_MESSAGES,
[if test $ac_cv_header_locale_h = yes; then
AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
[AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
if test $am_cv_val_LC_MESSAGES = yes; then
AC_DEFINE(HAVE_LC_MESSAGES, 1,
[Define if your locale.h file contains LC_MESSAGES.])
fi
fi])
dnl AM_PROG_LEX
dnl Look for flex, lex or missing, then run AC_PROG_LEX and AC_DECL_YYTEXT

1130
ld/configure vendored

File diff suppressed because it is too large Load Diff

View File

@ -1,3 +1,9 @@
2000-08-31 Alexandre Oliva <aoliva@redhat.com>
* acinclude.m4: Include libtool and gettext macros from the
top level.
* aclocal.m4, configure: Rebuilt.
2000-08-28 Mark Hatle <mhatle@mvista.com>
* ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.

View File

@ -1 +1,17 @@
sinclude(../bfd/acinclude.m4)
dnl sinclude(../libtool.m4) already included in bfd/acinclude.m4
dnl The lines below arrange for aclocal not to bring libtool.m4
dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
dnl to add a definition of LIBTOOL to Makefile.in.
ifelse(yes,no,[
AC_DEFUN([AM_PROG_LIBTOOL],)
AC_DEFUN([AM_DISABLE_SHARED],)
AC_SUBST(LIBTOOL)
])
dnl sinclude(../gettext.m4) already included in bfd/acinclude.m4
ifelse(yes,no,[
AC_DEFUN([CY_WITH_NLS],)
AC_SUBST(INTLLIBS)
])

765
opcodes/aclocal.m4 vendored
View File

@ -12,6 +12,22 @@ dnl PARTICULAR PURPOSE.
sinclude(../bfd/acinclude.m4)
dnl sinclude(../libtool.m4) already included in bfd/acinclude.m4
dnl The lines below arrange for aclocal not to bring libtool.m4
dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
dnl to add a definition of LIBTOOL to Makefile.in.
ifelse(yes,no,[
AC_DEFUN([AM_PROG_LIBTOOL],)
AC_DEFUN([AM_DISABLE_SHARED],)
AC_SUBST(LIBTOOL)
])
dnl sinclude(../gettext.m4) already included in bfd/acinclude.m4
ifelse(yes,no,[
AC_DEFUN([CY_WITH_NLS],)
AC_SUBST(INTLLIBS)
])
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
@ -104,410 +120,6 @@ else
fi
AC_SUBST($1)])
# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
# Save cache, so that ltconfig can load it
AC_CACHE_SAVE
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| AC_MSG_ERROR([libtool configure failed])
# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl
# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])
AC_DEFUN(AC_LIBTOOL_SETUP,
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[libtool_flags="$libtool_flags --enable-win32-dll"])
AC_ARG_ENABLE(libtool-lock,
[ --disable-libtool-lock avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$host" in
*-*-irix6*)
# Find out which ABI we are using.
echo '[#]line __oline__ "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw*)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
])
esac
])
# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_SHARED, [dnl
define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_STATIC, [dnl
define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
for pkg in $enableval; do
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$ac_save_ifs"
;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])
AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
ac_cv_prog_gnu_ld=yes
else
ac_cv_prog_gnu_ld=no
fi])
])
# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -B"
break
elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
ac_cv_path_NM="$ac_dir/nm -p"
break
else
ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
])
# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case "$host" in
*-*-beos* | *-*-cygwin*)
# These system don't have libm
;;
*-ncr-sysv4.3*)
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
*)
AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library, adds --enable-ltdl-convenience to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
esac
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])
# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library, and adds --enable-ltdl-install to
# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'. Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_CHECK_LIB(ltdl, main,
[test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
[if test x"$enable_ltdl_install" = xno; then
AC_MSG_WARN([libltdl not installed, but installation disabled])
else
enable_ltdl_install=yes
fi
])
if test x"$enable_ltdl_install" = x"yes"; then
ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
else
ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
LIBLTDL="-lltdl"
INCLTDL=
fi
])
dnl old names
AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl
# Like AC_CONFIG_HEADER, but automatically create stamp file.
AC_DEFUN(AM_CONFIG_HEADER,
@ -564,348 +176,3 @@ else
$1_FALSE=
fi])
# This file is derived from `gettext.m4'. The difference is that the
# included macros assume Cygnus-style source and build trees.
# Macro to add for using GNU gettext.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 3
AC_DEFUN(CY_WITH_NLS,
[AC_MSG_CHECKING([whether NLS is requested])
dnl Default is enabled NLS
AC_ARG_ENABLE(nls,
[ --disable-nls do not use Native Language Support],
USE_NLS=$enableval, USE_NLS=yes)
AC_MSG_RESULT($USE_NLS)
AC_SUBST(USE_NLS)
USE_INCLUDED_LIBINTL=no
dnl If we use NLS figure out what method
if test "$USE_NLS" = "yes"; then
AC_DEFINE(ENABLE_NLS, 1, [Define to 1 if NLS is requested])
AC_MSG_CHECKING([whether included gettext is requested])
AC_ARG_WITH(included-gettext,
[ --with-included-gettext use the GNU gettext library included here],
nls_cv_force_use_gnu_gettext=$withval,
nls_cv_force_use_gnu_gettext=no)
AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
dnl User does not insist on using GNU NLS library. Figure out what
dnl to use. If gettext or catgets are available (in this order) we
dnl use this. Else we have to fall back to GNU NLS library.
dnl catgets is only used if permitted by option --with-catgets.
nls_cv_header_intl=
nls_cv_header_libgt=
CATOBJEXT=NONE
AC_CHECK_HEADER(libintl.h,
[AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
[AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
if test "$gt_cv_func_gettext_libc" != "yes"; then
AC_CHECK_LIB(intl, bindtextdomain,
[AC_CACHE_CHECK([for gettext in libintl],
gt_cv_func_gettext_libintl,
[AC_TRY_LINK([], [return (int) gettext ("")],
gt_cv_func_gettext_libintl=yes,
gt_cv_func_gettext_libintl=no)])])
fi
if test "$gt_cv_func_gettext_libc" = "yes" \
|| test "$gt_cv_func_gettext_libintl" = "yes"; then
AC_DEFINE(HAVE_GETTEXT, 1,
[Define as 1 if you have gettext and don't want to use GNU gettext.])
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
if test "$MSGFMT" != "no"; then
AC_CHECK_FUNCS(dcgettext)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
return _nl_msg_cat_cntr],
[CATOBJEXT=.gmo
DATADIRNAME=share],
[CATOBJEXT=.mo
DATADIRNAME=lib])
INSTOBJEXT=.mo
fi
fi
])
dnl In the standard gettext, we would now check for catgets.
dnl However, we never want to use catgets for our releases.
if test "$CATOBJEXT" = "NONE"; then
dnl Neither gettext nor catgets in included in the C library.
dnl Fall back on GNU gettext library.
nls_cv_use_gnu_gettext=yes
fi
fi
if test "$nls_cv_use_gnu_gettext" = "yes"; then
dnl Mark actions used to generate GNU NLS library.
INTLOBJS="\$(GETTOBJS)"
AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
[test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
AC_SUBST(MSGFMT)
USE_INCLUDED_LIBINTL=yes
CATOBJEXT=.gmo
INSTOBJEXT=.mo
DATADIRNAME=share
INTLDEPS='$(top_builddir)/../intl/libintl.a'
INTLLIBS=$INTLDEPS
LIBS=`echo $LIBS | sed -e 's/-lintl//'`
nls_cv_header_intl=libintl.h
nls_cv_header_libgt=libgettext.h
fi
dnl Test whether we really found GNU xgettext.
if test "$XGETTEXT" != ":"; then
dnl If it is no GNU xgettext we define it as : so that the
dnl Makefiles still can work.
if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
: ;
else
AC_MSG_RESULT(
[found xgettext programs is not GNU xgettext; ignore it])
XGETTEXT=":"
fi
fi
# We need to process the po/ directory.
POSUB=po
else
DATADIRNAME=share
nls_cv_header_intl=libintl.h
nls_cv_header_libgt=libgettext.h
fi
# If this is used in GNU gettext we have to set USE_NLS to `yes'
# because some of the sources are only built for this goal.
if test "$PACKAGE" = gettext; then
USE_NLS=yes
USE_INCLUDED_LIBINTL=yes
fi
dnl These rules are solely for the distribution goal. While doing this
dnl we only have to keep exactly one list of the available catalogs
dnl in configure.in.
for lang in $ALL_LINGUAS; do
GMOFILES="$GMOFILES $lang.gmo"
POFILES="$POFILES $lang.po"
done
dnl Make all variables we use known to autoconf.
AC_SUBST(USE_INCLUDED_LIBINTL)
AC_SUBST(CATALOGS)
AC_SUBST(CATOBJEXT)
AC_SUBST(DATADIRNAME)
AC_SUBST(GMOFILES)
AC_SUBST(INSTOBJEXT)
AC_SUBST(INTLDEPS)
AC_SUBST(INTLLIBS)
AC_SUBST(INTLOBJS)
AC_SUBST(POFILES)
AC_SUBST(POSUB)
])
AC_DEFUN(CY_GNU_GETTEXT,
[AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_ISC_POSIX])dnl
AC_REQUIRE([AC_HEADER_STDC])dnl
AC_REQUIRE([AC_C_CONST])dnl
AC_REQUIRE([AC_C_INLINE])dnl
AC_REQUIRE([AC_TYPE_OFF_T])dnl
AC_REQUIRE([AC_TYPE_SIZE_T])dnl
AC_REQUIRE([AC_FUNC_ALLOCA])dnl
AC_REQUIRE([AC_FUNC_MMAP])dnl
AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
unistd.h values.h sys/param.h])
AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
__argz_count __argz_stringify __argz_next])
if test "${ac_cv_func_stpcpy+set}" != "set"; then
AC_CHECK_FUNCS(stpcpy)
fi
if test "${ac_cv_func_stpcpy}" = "yes"; then
AC_DEFINE(HAVE_STPCPY, 1, [Define if you have the stpcpy function])
fi
AM_LC_MESSAGES
CY_WITH_NLS
if test "x$CATOBJEXT" != "x"; then
if test "x$ALL_LINGUAS" = "x"; then
LINGUAS=
else
AC_MSG_CHECKING(for catalogs to be installed)
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
*$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
esac
done
LINGUAS=$NEW_LINGUAS
AC_MSG_RESULT($LINGUAS)
fi
dnl Construct list of names of catalog files to be constructed.
if test -n "$LINGUAS"; then
for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
fi
fi
dnl The reference to <locale.h> in the installed <libintl.h> file
dnl must be resolved because we cannot expect the users of this
dnl to define HAVE_LOCALE_H.
if test $ac_cv_header_locale_h = yes; then
INCLUDE_LOCALE_H="#include <locale.h>"
else
INCLUDE_LOCALE_H="\
/* The system does not provide the header <locale.h>. Take care yourself. */"
fi
AC_SUBST(INCLUDE_LOCALE_H)
dnl Determine which catalog format we have (if any is needed)
dnl For now we know about two different formats:
dnl Linux libc-5 and the normal X/Open format
if test -f $srcdir/po2tbl.sed.in; then
if test "$CATOBJEXT" = ".cat"; then
AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
dnl Transform the SED scripts while copying because some dumb SEDs
dnl cannot handle comments.
sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
fi
dnl po2tbl.sed is always needed.
sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
$srcdir/po2tbl.sed.in > po2tbl.sed
fi
dnl In the intl/Makefile.in we have a special dependency which makes
dnl only sense for gettext. We comment this out for non-gettext
dnl packages.
if test "$PACKAGE" = "gettext"; then
GT_NO="#NO#"
GT_YES=
else
GT_NO=
GT_YES="#YES#"
fi
AC_SUBST(GT_NO)
AC_SUBST(GT_YES)
MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
AC_SUBST(MKINSTALLDIRS)
dnl *** For now the libtool support in intl/Makefile is not for real.
l=
AC_SUBST(l)
dnl Generate list of files to be processed by xgettext which will
dnl be included in po/Makefile. But only do this if the po directory
dnl exists in srcdir.
if test -d $srcdir/po; then
test -d po || mkdir po
if test "x$srcdir" != "x."; then
if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
posrcprefix="$srcdir/"
else
posrcprefix="../$srcdir/"
fi
else
posrcprefix="../"
fi
rm -f po/POTFILES
sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
< $srcdir/po/POTFILES.in > po/POTFILES
fi
])
# Search path for a program which passes the given test.
# Ulrich Drepper <drepper@cygnus.com>, 1996.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
AC_DEFUN(AM_PATH_PROG_WITH_TEST,
[# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=[$]2
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL(ac_cv_path_$1,
[case "[$]$1" in
/*)
ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in ifelse([$5], , $PATH, [$5]); do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if [$3]; then
ac_cv_path_$1="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
dnl If no 4th arg is given, leave the cache variable unset,
dnl so AC_PATH_PROGS will keep looking.
ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
])dnl
;;
esac])dnl
$1="$ac_cv_path_$1"
if test -n "[$]$1"; then
AC_MSG_RESULT([$]$1)
else
AC_MSG_RESULT(no)
fi
AC_SUBST($1)dnl
])
# Check whether LC_MESSAGES is available in <locale.h>.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
# serial 1
AC_DEFUN(AM_LC_MESSAGES,
[if test $ac_cv_header_locale_h = yes; then
AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
[AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
if test $am_cv_val_LC_MESSAGES = yes; then
AC_DEFINE(HAVE_LC_MESSAGES, 1,
[Define if your locale.h file contains LC_MESSAGES.])
fi
fi])

1045
opcodes/configure vendored

File diff suppressed because it is too large Load Diff