diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 33c63276df..a57814311d 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,14 @@ +Thu Nov 21 19:13:58 1996 Mark Alexander + + * mips-tdep.c: Replace hard-coded constants with MIPS_INSTLEN. + (common_breakpoint): Use paddr instead of %x to print 64-bit values. + (heuristic_proc_desc): Add tests for 64-bit instructions. + (init_extra_frame_info, mips_push_arguments): Recognize additional + registers for EABI. + * remote-mips.c: Extend DDB target to allow TFTP downloads. + * config/mips/tm-mips.h (MIPS_LAST_ARG_REGNUM, MIPS_NUM_ARG_REGS): + Define. + Wed Nov 20 19:09:16 1996 Martin M. Hunt * infcmd.c (do_registers_info): Call val_print with the diff --git a/gdb/config/mips/tm-mips.h b/gdb/config/mips/tm-mips.h index b31a64f6e4..83f2f1ddd3 100644 --- a/gdb/config/mips/tm-mips.h +++ b/gdb/config/mips/tm-mips.h @@ -163,6 +163,13 @@ extern int in_sigtramp PARAMS ((CORE_ADDR, char *)); #define ZERO_REGNUM 0 /* read-only register, always 0 */ #define V0_REGNUM 2 /* Function integer return value */ #define A0_REGNUM 4 /* Loc of first arg during a subr call */ +#if MIPS_EABI + #define MIPS_LAST_ARG_REGNUM 11 /* EABI uses R4 through R11 for args */ + #define MIPS_NUM_ARG_REGS 8 +#else + #define MIPS_LAST_ARG_REGNUM 7 /* old ABI uses R4 through R7 for args */ + #define MIPS_NUM_ARG_REGS 4 +#endif #define SP_REGNUM 29 /* Contains address of top of stack */ #define RA_REGNUM 31 /* Contains return address value */ #define PS_REGNUM 32 /* Contains processor status */ diff --git a/gdb/remote-mips.c b/gdb/remote-mips.c index 4956e226d2..55ae2fb7b1 100644 --- a/gdb/remote-mips.c +++ b/gdb/remote-mips.c @@ -29,8 +29,11 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "serial.h" #include "target.h" #include "remote-utils.h" +#include "gdb_string.h" #include +#include +#include #ifdef ANSI_PROTOTYPES #include #else @@ -118,7 +121,13 @@ static void pmon_make_fastrec PARAMS ((char **outbuf, unsigned char *inbuf, int *inptr, int inamount, int *recsize, unsigned int *csum, unsigned int *zerofill)); -static int pmon_check_ack PARAMS ((void)); +static int pmon_check_ack PARAMS ((char *mesg)); + +static void pmon_start_download PARAMS ((void)); + +static void pmon_end_download PARAMS ((int final, int bintotal)); + +static void pmon_download PARAMS ((char *buffer, int length)); static void pmon_load_fast PARAMS ((char *file)); @@ -239,7 +248,7 @@ extern struct target_ops ddb_ops; (((hdr)[HDR_INDX_TYPE_LEN] & TYPE_LEN_DA_BIT) == TYPE_LEN_DATA) #define HDR_GET_LEN(hdr) \ ((((hdr)[HDR_INDX_TYPE_LEN] & 0x1f) << 6) + (((hdr)[HDR_INDX_LEN1] & 0x3f))) -#define HDR_GET_SEQ(hdr) ((hdr)[HDR_INDX_SEQ] & 0x3f) +#define HDR_GET_SEQ(hdr) ((unsigned int)(hdr)[HDR_INDX_SEQ] & 0x3f) /* The maximum data length. */ #define DATA_MAXLEN 1023 @@ -271,6 +280,10 @@ extern struct target_ops ddb_ops; /* The sequence number modulos. */ #define SEQ_MODULOS (64) +/* PMON commands to load from the serial port or UDP socket. */ +#define LOAD_CMD "load -b -s tty0\r" +#define LOAD_CMD_UDP "load -b -s udp\r" + enum mips_monitor_type { /* IDT/SIM monitor being used: */ MON_IDT, @@ -329,6 +342,17 @@ static int mips_need_reply = 0; /* Handle used to access serial I/O stream. */ static serial_t mips_desc; +/* UDP handle used to download files to target. */ +static serial_t udp_desc; +static int udp_in_use; + +/* TFTP filename used to download files to DDB board, in the form + host:filename. */ +static char *tftp_name; /* host:filename */ +static char *tftp_localname; /* filename portion of above */ +static int tftp_in_use; +static FILE *tftp_file; + /* Counts the number of times the user tried to interrupt the target (usually via ^C. */ static int interrupt_count; @@ -341,11 +365,27 @@ static monitor_supports_breakpoints = 0; /* Data cache header. */ +#if 0 /* not used (yet?) */ static DCACHE *mips_dcache; +#endif /* Non-zero means that we've just hit a read or write watchpoint */ static int hit_watchpoint; +static void +close_ports() +{ + mips_is_open = 0; + SERIAL_CLOSE (mips_desc); + + if (udp_in_use) + { + SERIAL_CLOSE (udp_desc); + udp_in_use = 0; + } + tftp_in_use = 0; +} + /* Handle low-level error that we can't recover from. Note that just error()ing out from target_wait or some such low-level place will cause all hell to break loose--the rest of GDB will tend to get left in an @@ -382,8 +422,7 @@ mips_error (va_alist) /* Clean up in such a way that mips_close won't try to talk to the board (it almost surely won't work since we weren't able to talk to it). */ - mips_is_open = 0; - SERIAL_CLOSE (mips_desc); + close_ports (); printf_unfiltered ("Ending remote MIPS debugging.\n"); target_mourn_inferior (); @@ -391,15 +430,58 @@ mips_error (va_alist) return_to_top_level (RETURN_ERROR); } -/* Wait until STRING shows up in mips_desc. Returns 1 if successful, else 0 if - timed out. */ +/* putc_readable - print a character, displaying non-printable chars in + ^x notation or in hex. */ -int -mips_expect (string) +static void +putc_readable (ch) + int ch; +{ + if (ch == '\n') + putchar_unfiltered ('\n'); + else if (ch == '\r') + printf_unfiltered ("\\r"); + else if (ch < 0x20) /* ASCII control character */ + printf_unfiltered ("^%c", ch + '@'); + else if (ch >= 0x7f) /* non-ASCII characters (rubout or greater) */ + printf_unfiltered ("[%02x]", ch & 0xff); + else + putchar_unfiltered (ch); +} + + +/* puts_readable - print a string, displaying non-printable chars in + ^x notation or in hex. */ + +static void +puts_readable (string) char *string; +{ + int c; + + while ((c = *string++) != '\0') + putc_readable (c); +} + + +/* Wait until STRING shows up in mips_desc. Returns 1 if successful, else 0 if + timed out. TIMEOUT specifies timeout value in seconds. +*/ + +int +mips_expect_timeout (string, timeout) + char *string; + int timeout; { char *p = string; + if (remote_debug) + { + printf_unfiltered ("Expected \""); + puts_readable (string); + printf_unfiltered ("\", got \""); + } + immediate_quit = 1; while (1) { @@ -408,16 +490,25 @@ mips_expect (string) /* Must use SERIAL_READCHAR here cuz mips_readchar would get confused if we were waiting for the mips_monitor_prompt... */ - c = SERIAL_READCHAR (mips_desc, 2); + c = SERIAL_READCHAR (mips_desc, timeout); if (c == SERIAL_TIMEOUT) - return 0; + { + if (remote_debug) + printf_unfiltered ("\": FAIL\n"); + return 0; + } + + if (remote_debug) + putc_readable (c); if (c == *p++) { if (*p == '\0') { immediate_quit = 0; + if (remote_debug) + printf_unfiltered ("\": OK\n"); return 1; } } @@ -430,6 +521,18 @@ mips_expect (string) } } +/* Wait until STRING shows up in mips_desc. Returns 1 if successful, else 0 if + timed out. The timeout value is hard-coded to 2 seconds. Use + mips_expect_timeout if a different timeout value is needed. +*/ + +int +mips_expect (string) + char *string; +{ + return mips_expect_timeout (string, 2); +} + /* Read the required number of characters into the given buffer (which is assumed to be large enough). The only failure is a timeout. */ int @@ -481,7 +584,7 @@ mips_readchar (timeout) /* NASTY, since we assume that the prompt does not change after the first mips_readchar call: */ - if (mips_monitor_prompt_len = -1) + if (mips_monitor_prompt_len == -1) mips_monitor_prompt_len = strlen(mips_monitor_prompt); #ifdef MAINTENANCE_CMDS @@ -584,19 +687,7 @@ mips_receive_header (hdr, pgarbage, ch, timeout) we can't deal with a QUIT out of target_wait. */ if (! mips_initializing || remote_debug > 0) { - /* Note that the host's idea of newline may not - correspond to the target's idea, so recognize - newline by its actual ASCII code, but write it - out using the \n notation. */ - if (ch < 0x20 && ch != '\012') - { - putchar_unfiltered ('^'); - putchar_unfiltered (ch + 0x40); - } - else if (ch == '\012') - putchar_unfiltered ('\n'); - else - putchar_unfiltered (ch); + putc_readable (ch); gdb_flush (gdb_stdout); } @@ -692,7 +783,7 @@ mips_send_packet (s, get_ack) const char *s; int get_ack; { - unsigned int len; + /* unsigned */ int len; unsigned char *packet; register int cksum; int try; @@ -749,7 +840,7 @@ mips_send_packet (s, get_ack) unsigned char hdr[HDR_LENGTH + 1]; unsigned char trlr[TRLR_LENGTH + 1]; int err; - int seq; + unsigned int seq; /* Get the packet header. If we time out, resend the data packet. */ @@ -1145,7 +1236,7 @@ mips_send_command (cmd, prompt) { SERIAL_WRITE (mips_desc, cmd, strlen(cmd)); mips_expect (cmd); - mips_expect ("\012"); + mips_expect ("\n"); if (prompt) mips_expect (mips_monitor_prompt); } @@ -1159,18 +1250,18 @@ mips_enter_debug () mips_receive_seq = 0; if (mips_monitor == MON_PMON || mips_monitor == MON_DDB) - mips_send_command ("debug\015", 0); + mips_send_command ("debug\r", 0); else /* assume IDT monitor by default */ - mips_send_command ("db tty0\015", 0); + mips_send_command ("db tty0\r", 0); - SERIAL_WRITE (mips_desc, "\015", sizeof "\015" - 1); + SERIAL_WRITE (mips_desc, "\r", sizeof "\r" - 1); /* We don't need to absorb any spurious characters here, since the mips_receive_header will eat up a reasonable number of characters whilst looking for the SYN, however this avoids the "garbage" being displayed to the user. */ if (mips_monitor == MON_PMON || mips_monitor == MON_DDB) - mips_expect ("\015"); + mips_expect ("\r"); { char buff[DATA_MAXLEN + 1]; @@ -1204,11 +1295,11 @@ mips_exit_debug () if (mips_monitor == MON_DDB) { - if (!mips_expect ("\012")) + if (!mips_expect ("\n")) return -1; } else - if (!mips_expect ("\015\012")) + if (!mips_expect ("\r\n")) return -1; if (!mips_expect (mips_monitor_prompt)) @@ -1255,7 +1346,7 @@ mips_initialize () { case 0: /* First, try sending a CR */ SERIAL_FLUSH_INPUT (mips_desc); - SERIAL_WRITE (mips_desc, "\015", 1); + SERIAL_WRITE (mips_desc, "\r", 1); break; case 1: /* First, try sending a break */ SERIAL_SEND_BREAK (mips_desc); @@ -1276,7 +1367,7 @@ mips_initialize () we flush the output buffer before inserting a termination sequence. */ SERIAL_FLUSH_OUTPUT (mips_desc); - sprintf (tbuff, "\015/E/E\015"); + sprintf (tbuff, "\r/E/E\r"); SERIAL_WRITE (mips_desc, tbuff, 6); } else @@ -1317,11 +1408,11 @@ mips_initialize () if (mips_monitor == MON_PMON || mips_monitor == MON_DDB) { /* Ensure the correct target state: */ - mips_send_command ("set regsize 64\015", -1); - mips_send_command ("set hostport tty0\015", -1); - mips_send_command ("set brkcmd \"\"\015", -1); + mips_send_command ("set regsize 64\r", -1); + mips_send_command ("set hostport tty0\r", -1); + mips_send_command ("set brkcmd \"\"\r", -1); /* Delete all the current breakpoints: */ - mips_send_command ("db *\015", -1); + mips_send_command ("db *\r", -1); /* NOTE: PMON does not have breakpoint support through the "debug" mode, only at the monitor command-line. */ } @@ -1353,39 +1444,97 @@ common_open (ops, name, from_tty) int from_tty; { char *ptype; + char *serial_port_name; + char *remote_name = 0; + char *local_name = 0; + char **argv; if (name == 0) error ( "To open a MIPS remote debugging connection, you need to specify what serial\n\ -device is attached to the target board (e.g., /dev/ttya)."); +device is attached to the target board (e.g., /dev/ttya).\n" +"If you want to use TFTP to download to the board, specify the name of a\n" +"temporary file to be used by GDB for downloads as the second argument.\n" +"This filename must be in the form host:filename, where host is the name\n" +"of the host running the TFTP server, and the file must be readable by the\n" +"world. If the local name of the temporary file differs from the name as\n", +"seen from the board via TFTP, specify that name as the third parameter\n"); + + /* Parse the serial port name, the optional TFTP name, and the + optional local TFTP name. */ + if ((argv = buildargv (name)) == NULL) + nomem(0); + make_cleanup (freeargv, (char *) argv); + + serial_port_name = strsave (argv[0]); + if (argv[1]) /* remote TFTP name specified? */ + { + remote_name = argv[1]; + if (argv[2]) /* local TFTP filename specified? */ + local_name = argv[2]; + } target_preopen (from_tty); if (mips_is_open) unpush_target (current_ops); - mips_desc = SERIAL_OPEN (name); + /* Open and initialize the serial port. */ + mips_desc = SERIAL_OPEN (serial_port_name); if (mips_desc == (serial_t) NULL) - perror_with_name (name); + perror_with_name (serial_port_name); if (baud_rate != -1) { if (SERIAL_SETBAUDRATE (mips_desc, baud_rate)) { SERIAL_CLOSE (mips_desc); - perror_with_name (name); + perror_with_name (serial_port_name); } } SERIAL_RAW (mips_desc); + /* Open and initialize the optional download port. If it is in the form + hostname#portnumber, it's a UDP socket. If it is in the form + hostname:filename, assume it's the TFTP filename that must be + passed to the DDB board to tell it where to get the load file. */ + if (remote_name) + { + if (strchr (remote_name, '#')) + { + udp_desc = SERIAL_OPEN (remote_name); + if (!udp_desc) + perror_with_name ("Unable to open UDP port"); + udp_in_use = 1; + } + else + { + /* Save the remote and local names of the TFTP temp file. If + the user didn't specify a local name, assume it's the same + as the part of the remote name after the "host:". */ + if (tftp_name) + free (tftp_name); + if (tftp_localname) + free (tftp_localname); + if (local_name == NULL) + if ((local_name = strchr (remote_name, ':')) != NULL) + local_name++; /* skip over the colon */ + if (local_name == NULL) + local_name = remote_name; /* local name same as remote name */ + tftp_name = strsave (remote_name); + tftp_localname = strsave (local_name); + tftp_in_use = 1; + } + } + current_ops = ops; mips_is_open = 1; mips_initialize (); if (from_tty) - printf_unfiltered ("Remote MIPS debugging using %s\n", name); + printf_unfiltered ("Remote MIPS debugging using %s\n", serial_port_name); /* Switch to using remote target now. */ push_target (ops); @@ -1408,6 +1557,7 @@ device is attached to the target board (e.g., /dev/ttya)."); set_current_frame (create_new_frame (read_fp (), stop_pc)); select_frame (get_current_frame (), 0); print_stack_frame (selected_frame, -1, 1); + free (serial_port_name); } static void @@ -1451,14 +1601,10 @@ mips_close (quitting) { if (mips_is_open) { - int err; - - mips_is_open = 0; - /* Get the board out of remote debugging mode. */ (void) mips_exit_debug (); - SERIAL_CLOSE (mips_desc); + close_ports (); } } @@ -1732,7 +1878,7 @@ static void mips_fetch_registers (regno) int regno; { - ULONGEST val; + unsigned LONGEST val; int err; if (regno == -1) @@ -1977,8 +2123,7 @@ Give up (and stop debugging it)? ")) board (it almost surely won't work since we weren't able to talk to it). */ mips_wait_flag = 0; - mips_is_open = 0; - SERIAL_CLOSE (mips_desc); + close_ports(); printf_unfiltered ("Ending remote MIPS debugging.\n"); target_mourn_inferior (); @@ -2079,8 +2224,6 @@ mips_insert_breakpoint (addr, contents_cache) CORE_ADDR addr; char *contents_cache; { - int status; - if (monitor_supports_breakpoints) return common_breakpoint ('B', addr, 0x3, "f"); @@ -2126,7 +2269,7 @@ pmon_insert_breakpoint (addr, contents_cache) if (mips_exit_debug ()) mips_error ("Failed to exit debug mode"); - sprintf (tbuff, "b %08x\015", addr); + sprintf (tbuff, "b %08x\r", addr); mips_send_command (tbuff, 0); mips_expect ("Bpt "); @@ -2170,7 +2313,7 @@ pmon_insert_breakpoint (addr, contents_cache) mips_pmon_bp_info[bpnum] = bpaddr; - mips_expect ("\015\012"); + mips_expect ("\r\n"); mips_expect (mips_monitor_prompt); mips_enter_debug (); @@ -2204,7 +2347,7 @@ pmon_remove_breakpoint (addr, contents_cache) if (mips_exit_debug ()) mips_error ("Failed to exit debug mode"); - sprintf (tbuff, "db %02d\015", bpnum); + sprintf (tbuff, "db %02d\r", bpnum); mips_send_command (tbuff, -1); /* NOTE: If the breakpoint does not exist then a "Bpt
not @@ -2328,9 +2471,9 @@ common_breakpoint (cmd, addr, mask, flags) int nfields; if (flags) - sprintf (buf, "0x0 %c 0x%x 0x%x %s", cmd, addr, mask, flags); + sprintf (buf, "0x0 %c 0x%s 0x%s %s", cmd, paddr (addr), paddr (mask), flags); else - sprintf (buf, "0x0 %c 0x%x", cmd, addr); + sprintf (buf, "0x0 %c 0x%s", cmd, paddr (addr)); mips_send_packet (buf, 1); @@ -2397,8 +2540,8 @@ mips_load_srec (args) bfd *abfd; asection *s; char *buffer, srec[1024]; - int i; - int srec_frame = 200; + unsigned int i; + unsigned int srec_frame = 200; int reclen; static int hashmark = 1; @@ -2418,14 +2561,13 @@ mips_load_srec (args) } /* This actually causes a download in the IDT binary format: */ -#define LOAD_CMD "load -b -s tty0\015" mips_send_command (LOAD_CMD, 0); for (s = abfd->sections; s; s = s->next) { if (s->flags & SEC_LOAD) { - int numbytes; + unsigned int numbytes; /* FIXME! vma too small?? */ printf_filtered ("%s\t: 0x%4x .. 0x%4x ", s->name, s->vma, @@ -2646,7 +2788,7 @@ pmon_checkset (recsize, buff, value) sprintf (*buff, "/C"); count = pmon_makeb64 (*value, (*buff + 2), 12, NULL); *buff += (count + 2); - sprintf (*buff, "\015"); + sprintf (*buff, "\n"); *buff += 2; /* include zero terminator */ /* Forcing a checksum validation clears the sum: */ *value = 0; @@ -2722,18 +2864,112 @@ pmon_make_fastrec (outbuf, inbuf, inptr, inamount, recsize, csum, zerofill) return; } -#if defined(DOETXACK) static int -pmon_check_ack() +pmon_check_ack(mesg) + char *mesg; { - int c = SERIAL_READCHAR (mips_desc, 2); - if ((c == SERIAL_TIMEOUT) || (c != 0x06)) { - fprintf_unfiltered (gdb_stderr, "Failed to receive valid ACK\n"); - return(-1); /* terminate the download */ - } +#if defined(DOETXACK) + int c; + + if (!tftp_in_use) + { + c = SERIAL_READCHAR (udp_in_use ? udp_desc : mips_desc, 2); + if ((c == SERIAL_TIMEOUT) || (c != 0x06)) + { + fprintf_unfiltered (gdb_stderr, + "Failed to receive valid ACK for %s\n", mesg); + return(-1); /* terminate the download */ + } + } +#endif /* DOETXACK */ return(0); } -#endif /* DOETXACK */ + +/* pmon_download - Send a sequence of characters to the PMON download port, + which is either a serial port or a UDP socket. */ + +static void +pmon_start_download () +{ + if (tftp_in_use) + { + /* Create the temporary download file. */ + if ((tftp_file = fopen (tftp_localname, "w")) == NULL) + perror_with_name (tftp_localname); + } + else + { + mips_send_command (udp_in_use ? LOAD_CMD_UDP : LOAD_CMD, 0); + mips_expect ("Downloading from "); + mips_expect (udp_in_use ? "udp" : "tty0"); + mips_expect (", ^C to abort\r\n"); + } +} + +static void +pmon_end_download (final, bintotal) + int final; + int bintotal; +{ + char hexnumber[9]; /* includes '\0' space */ + + if (tftp_in_use) + { + static char *load_cmd_prefix = "load -b -s "; + char *cmd; + struct stat stbuf; + + /* Close off the temporary file containing the load data. */ + fclose (tftp_file); + tftp_file = NULL; + + /* Make the temporary file readable by the world. */ + if (stat (tftp_localname, &stbuf) == 0) + chmod (tftp_localname, stbuf.st_mode | S_IROTH); + + /* Must reinitialize the board to prevent PMON from crashing. */ + mips_send_command ("initEther\r", -1); + + /* Send the load command. */ + cmd = xmalloc (strlen (load_cmd_prefix) + strlen (tftp_name) + 2); + strcpy (cmd, load_cmd_prefix); + strcat (cmd, tftp_name); + strcat (cmd, "\r"); + mips_send_command (cmd, 0); + free (cmd); + mips_expect ("Downloading from "); + mips_expect (tftp_name); + mips_expect (", ^C to abort\r\n"); + } + + /* Wait for the stuff that PMON prints after the load has completed. + The timeout value for use in the tftp case (15 seconds) was picked + arbitrarily but might be too small for really large downloads. FIXME. */ + mips_expect_timeout ("Entry Address = ", tftp_in_use ? 15 : 2); + sprintf (hexnumber,"%x",final); + mips_expect (hexnumber); + mips_expect ("\r\n"); + pmon_check_ack ("termination"); + mips_expect ("\r\ntotal = 0x"); + sprintf (hexnumber,"%x",bintotal); + mips_expect (hexnumber); + if (!mips_expect (" bytes\r\n")) + fprintf_unfiltered (gdb_stderr, "Load did not complete successfully.\n"); + + if (tftp_in_use) + remove (tftp_localname); /* Remove temporary file */ +} + +static void +pmon_download (buffer, length) + char *buffer; + int length; +{ + if (tftp_in_use) + fwrite (buffer, 1, length, tftp_file); + else + SERIAL_WRITE (udp_in_use ? udp_desc : mips_desc, buffer, length); +} static void pmon_load_fast (file) @@ -2745,9 +2981,9 @@ pmon_load_fast (file) char *buffer; int reclen; unsigned int csum = 0; - static int hashmark = 1; + int hashmark = !tftp_in_use; int bintotal = 0; - int final; + int final = 0; int finished = 0; buffer = (char *)xmalloc(MAXRECSIZE + 1); @@ -2767,23 +3003,19 @@ pmon_load_fast (file) } /* Setup the required download state: */ - mips_send_command ("set dlproto etxack\015", -1); - mips_send_command ("set dlecho off\015", -1); + mips_send_command ("set dlproto etxack\r", -1); + mips_send_command ("set dlecho off\r", -1); /* NOTE: We get a "cannot set variable" message if the variable is already defined to have the argument we give. The code doesn't care, since it just scans to the next prompt anyway. */ /* Start the download: */ - mips_send_command (LOAD_CMD, 0); - mips_expect ("Downloading from tty0, ^C to abort\015\012"); + pmon_start_download(); /* Zero the checksum */ - sprintf(buffer,"/Kxx\015"); + sprintf(buffer,"/Kxx\n"); reclen = strlen(buffer); - SERIAL_WRITE (mips_desc, buffer, reclen); - -#if defined(DOETXACK) - finished = pmon_check_ack(); -#endif /* DOETXACK */ + pmon_download (buffer, reclen); + finished = pmon_check_ack("/Kxx"); for (s = abfd->sections; s && !finished; s = s->next) if (s->flags & SEC_LOAD) /* only deal with loadable sections */ @@ -2798,20 +3030,18 @@ pmon_load_fast (file) /* Output the starting address */ sprintf(buffer,"/A"); reclen = pmon_makeb64(s->vma,&buffer[2],36,&csum); - buffer[2 + reclen] = '\015'; + buffer[2 + reclen] = '\n'; buffer[3 + reclen] = '\0'; reclen += 3; /* for the initial escape code and carriage return */ - SERIAL_WRITE (mips_desc, buffer, reclen); -#if defined(DOETXACK) - finished = pmon_check_ack(); -#endif /* DOETXACK */ + pmon_download (buffer, reclen); + finished = pmon_check_ack("/A"); if (!finished) { - int binamount; + unsigned int binamount; unsigned int zerofill = 0; char *bp = buffer; - int i; + unsigned int i; reclen = 0; @@ -2828,14 +3058,12 @@ pmon_load_fast (file) pmon_make_fastrec (&bp, binbuf, &binptr, binamount, &reclen, &csum, &zerofill); if (reclen >= (MAXRECSIZE - CHECKSIZE)) { reclen = pmon_checkset (reclen, &bp, &csum); - SERIAL_WRITE (mips_desc, buffer, reclen); -#if defined(DOETXACK) - finished = pmon_check_ack(); + pmon_download (buffer, reclen); + finished = pmon_check_ack("data record"); if (finished) { zerofill = 0; /* do not transmit pending zerofills */ break; } -#endif /* DOETXACK */ if (hashmark) { putchar_unfiltered ('#'); @@ -2857,38 +3085,24 @@ pmon_load_fast (file) reclen = pmon_checkset (reclen, &bp, &csum); /* Currently pmon_checkset outputs the line terminator by default, so we write out the buffer so far: */ - SERIAL_WRITE (mips_desc, buffer, reclen); -#if defined(DOETXACK) - finished = pmon_check_ack(); -#endif /* DOETXACK */ + pmon_download (buffer, reclen); + finished = pmon_check_ack("record remnant"); } } - if (hashmark) - putchar_unfiltered ('\n'); + putchar_unfiltered ('\n'); } /* Terminate the transfer. We know that we have an empty output buffer at this point. */ - sprintf (buffer, "/E/E\015"); /* include dummy padding characters */ + sprintf (buffer, "/E/E\n"); /* include dummy padding characters */ reclen = strlen (buffer); - SERIAL_WRITE (mips_desc, buffer, reclen); + pmon_download (buffer, reclen); if (finished) { /* Ignore the termination message: */ - SERIAL_FLUSH_INPUT (mips_desc); + SERIAL_FLUSH_INPUT (udp_in_use ? udp_desc : mips_desc); } else { /* Deal with termination message: */ - char hexnumber[9]; /* includes '\0' space */ - mips_expect ("Entry Address = "); - sprintf(hexnumber,"%x",final); - mips_expect (hexnumber); -#if defined(DOETXACK) - mips_expect ("\015\012\006\015\012total = 0x"); -#else /* normal termination */ - mips_expect ("\015\012\015\012total = 0x"); -#endif /* !DOETXACK */ - sprintf(hexnumber,"%x",bintotal); - mips_expect (hexnumber); - mips_expect (" bytes\015\012"); + pmon_end_download (final, bintotal); } return; @@ -3040,8 +3254,12 @@ struct target_ops ddb_ops = "Remote MIPS debugging over serial line", /* to_longname */ "\ Debug a board using the PMON MIPS remote debugging protocol over a serial\n\ -line. The argument is the device it is connected to or, if it contains a\n\ -colon, HOST:PORT to access a board over a network", /* to_doc */ +line. The first argument is the device it is connected to or, if it contains\n\ +a colon, HOST:PORT to access a board over a network. The optional second\n\ +parameter is the temporary file in the form HOST:FILENAME to be used for\n\ +TFTP downloads to the board. The optional third parameter is the local\n\ +of the TFTP temporary file, if it differs from the filename seen by the board", + /* to_doc */ ddb_open, /* to_open */ mips_close, /* to_close */ NULL, /* to_attach */