gas/ELF: don't accumulate .type settings

Recently a patch was submitted for a Xen Project test harness binary to
override the compiler specified @object to @func (see [1]). In a reply I
suggested we shouldn't make ourselves dependent on currently unspecified
behavior of gas here: It accumulates all requests, and then
bfd/elf.c:swap_out_syms(), in an apparently ad hoc manner, prioritizes
certain flags over others.

Make the behavior predictable: Generally the last .type is what counts.
Exceptions are directives which set multiple bits (TLS, IFUNC, and
UNIQUE): Subsequent directives requesting just the more generic bit
(i.e. FUNC following IFUNC) won't clear the more specific one.  Warn
about incompatible changes, except from/to STT_NOTYPE.

Also add a new target hook, which hppa wants to use right away afaict.

In the course of adding the warning I ran into two ld testsuite
failures.  I can only assume that it was a copy-and-paste mistake that
lead to the same symbol having its type set twice.

[1] https://lists.xenproject.org/archives/html/xen-devel/2019-05/msg01980.html
This commit is contained in:
Jan Beulich 2019-07-04 10:35:47 +02:00
parent db7fbcbeb7
commit f2d4ba38f5
10 changed files with 123 additions and 2 deletions

View File

@ -1,3 +1,14 @@
2019-07-04 Jan Beulich <jbeulich@suse.com>
* config/obj-elf.c (obj_elf_type): Check for conflicts between
old and new types.
* config/tc-hppa.h (md_elf_symbol_type_change): New.
* doc/as.texi: Mention warning behavior for the ELF flavor of
.type.
* testsuite/gas/elf/type-2.e, testsuite/gas/elf/type-2.l,
testsuite/gas/elf/type-2.s: New.
* testsuite/gas/elf/elf.exp: Run new test.
2019-07-03 Nick Clifton <nickc@redhat.com>
* testsuite/gas/aarch64/codealign.d: Update to work with a

View File

@ -2069,7 +2069,38 @@ obj_elf_type (int ignore ATTRIBUTE_UNUSED)
if (*input_line_pointer == '"')
++input_line_pointer;
elfsym->symbol.flags |= type;
#ifdef md_elf_symbol_type_change
if (!md_elf_symbol_type_change (sym, elfsym, type))
#endif
{
flagword mask = BSF_FUNCTION | BSF_OBJECT;
if (type != BSF_FUNCTION)
mask |= BSF_GNU_INDIRECT_FUNCTION;
if (type != BSF_OBJECT)
{
mask |= BSF_GNU_UNIQUE | BSF_THREAD_LOCAL;
if (S_IS_COMMON (sym))
{
as_bad (_("cannot change type of common symbol '%s'"),
S_GET_NAME (sym));
mask = type = 0;
}
}
/* Don't warn when changing to STT_NOTYPE. */
if (type)
{
flagword new = (elfsym->symbol.flags & ~mask) | type;
if (new != (elfsym->symbol.flags | type))
as_warn (_("symbol '%s' already has its type set"), S_GET_NAME (sym));
elfsym->symbol.flags = new;
}
else
elfsym->symbol.flags &= ~mask;
}
demand_empty_rest_of_line ();
}

View File

@ -177,6 +177,14 @@ int hppa_fix_adjustable (struct fix *);
), BSF_FUNCTION) \
: -1)
/* Handle type change from .type pseudo: Zap STT_PARISC_MILLI when
switching to a non-function type. */
#define md_elf_symbol_type_change(sym, elf, type) \
((type) != BSF_FUNCTION \
&& (((elf)->internal_elf_sym.st_info = \
ELF_ST_INFO (ELF_ST_BIND ((elf)->internal_elf_sym.st_info), \
STT_NOTYPE)), 0))
#define tc_frob_symbol(sym,punt) \
{ \
if ((S_GET_SEGMENT (sym) == bfd_und_section_ptr \

View File

@ -7215,6 +7215,10 @@ systems).
@end table
Changing between incompatible types other than from/to STT_NOTYPE will
result in a diagnostic. An intermediate change to STT_NOTYPE will silence
this.
Note: Some targets support extra types in addition to those listed above.
@end ifset

View File

@ -229,6 +229,7 @@ if { [is_elf_format] } then {
} else {
run_dump_test ifunc-1
run_elf_list_test "type" "" "" "-s" "| grep \"1 *\\\[FIONTCU\\\]\""
run_elf_list_test "type-2" "" "--warn" "-s" "| grep \"0 *\\\[FIONT\\\]\""
}
run_dump_test "section6"

View File

@ -0,0 +1,10 @@
+.+: 0+0 +0 +NOTYPE +LOCAL +DEFAULT +UND *
+.+: 0+0 +0 +OBJECT +LOCAL +DEFAULT +. test1
+.+: 0+1 +0 +FUNC +LOCAL +DEFAULT +. test2
+.+: 0+2 +0 +NOTYPE +LOCAL +DEFAULT +. test3
+.+: 0+3 +0 +NOTYPE +LOCAL +DEFAULT +. test4
+.+: 0+4 +0 +NOTYPE +LOCAL +DEFAULT +. test5
+.+: 0+5 +0 +NOTYPE +LOCAL +DEFAULT +. test6
+.+: 0+6 +0 +OBJECT +LOCAL +DEFAULT +. test7
+.+: 0+7 +0 +TLS +LOCAL +DEFAULT +. test8
+.+: 0+8 +0 +IFUNC +LOCAL +DEFAULT +. test9

View File

@ -0,0 +1,3 @@
.*: Assembler messages:
.*:4: Warning: .*
.*:9: Warning: .*

View File

@ -0,0 +1,49 @@
.text
.type test1,%function
.type test1,%object
test1:
.byte 0x0
.type test2,%object
.type test2,%function
test2:
.byte 0x0
.type test3,%object
.type test3,%notype
test3:
.byte 0x0
.type test4,%function
.type test4,%notype
test4:
.byte 0x0
.type test5,%tls_object
.type test5,%notype
test5:
.byte 0x0
.type test6,%gnu_indirect_function
.type test6,%notype
test6:
.byte 0x0
.type test7,%function
.type test7,%notype
.type test7,%object
test7:
.byte 0x0
.type test8,%object
.type test8,%tls_object
.type test8,%object
test8:
.byte 0x0
.type test9,%function
.type test9,%gnu_indirect_function
.type test9,%function
test9:
.byte 0x0

View File

@ -1,3 +1,7 @@
2019-07-04 Jan Beulich <jbeulich@suse.com>
* testsuite/ld-elf/group9.s: Correct argument of .type.
2019-07-02 Nick Clifton <nickc@redhat.com>
PR 24753

View File

@ -5,7 +5,7 @@ foo:
.byte 0
.section .data.foo,"axG",%progbits,foo,comdat
.globl foo.data
.type foo,%object
.type foo.data,%object
foo.data:
.byte 0
.section .text.bar,"axG",%progbits,bar,comdat