* findvar.c (read_register_gen): Add "target byte-order" comment.

Wed Apr 17 17:09:48 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)

	* i386-tdep.c (i386_get_frame_setup): Use SWAP_TARGET_AND_HOST
	before returning locals or slocals.

	* i386-tdep.c (i386_follow_jump): Do not add data16 to pos in
	call to codestream_seek; add one to pos if (and only if)
	we are dealing with a jump with data16 == 1 (i.e. 0x66, 0xe9).

Mon Apr 15 12:04:32 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)

	* valops.c (call_function_by_hand): Put dummy1 in target order
	before FIX_CALL_DUMMY.

	* tm-i386v.h (FIX_CALL_DUMMY): Don't depend on host byte order.

Sun Apr 14 11:55:19 1991  Jim Kingdon  (kingdon at cygint.cygnus.com)

	* valops.c (push_word): Add SWAP_TARGET_AND_HOST.

	* remote.c (remote_open): Send '+' before calling putpkt().

	* tm-i386v.h (REGISTER_VIRTUAL_TYPE): Return pointer to void,
	not int, for pc, fp, and sp.

	* remote.c (remote_open): Call start_remote after putpkt("?");

gdb/exec.c

@@ -39,6 +39,7 @@ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
 #include <sys/file.h>
 #endif
 
+#include <ctype.h>
 #include <sys/stat.h>
 
 extern char *getenv();

gdb/findvar.c

@@ -267,8 +267,9 @@ read_register_bytes (regbyte, myaddr, len)
 }
 
 /* Read register REGNO into memory at MYADDR, which must be large enough
-   for REGISTER_RAW_BYTES (REGNO).  If the register is known to be the
+   for REGISTER_RAW_BYTES (REGNO).  Target byte-order.
-   size of a CORE_ADDR or smaller, read_register can be used instead.  */
+   If the register is known to be the size of a CORE_ADDR or smaller,
+   read_register can be used instead.  */
 void
 read_register_gen (regno, myaddr)
      int regno;

gdb/i386-tdep.c

@@ -1,5 +1,5 @@
-/* Intel 386 stuff.
+/* Intel 386 target-dependent stuff.
-   Copyright (C) 1988, 1989 Free Software Foundation, Inc.
+   Copyright (C) 1988, 1989, 1991 Free Software Foundation, Inc.
 
 This file is part of GDB.
 
@@ -46,15 +46,7 @@ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
 #include <sys/file.h>
 #include <sys/stat.h>
 
-/* I don't know whether this is right for cross-debugging even if you
+/* helper functions for tm-i386.h */
-   do somehow manage to get the right include file.  */
-#if defined (USE_MACHINE_REG_H)
-#include <machine/reg.h>
-#else
-#include <sys/reg.h>
-#endif
-
-/* helper functions for m-i386.h */
 
 /* stdio style buffering to minimize calls to ptrace */
 static CORE_ADDR codestream_next_addr;
@@ -133,7 +125,9 @@ i386_follow_jump ()
       if (data16)
 	{
 	  codestream_read ((unsigned char *)&short_delta, 2);
-	  pos += short_delta + 3; /* include size of jmp inst */
+
+	  /* include size of jmp inst (including the 0x66 prefix).  */
+	  pos += short_delta + 4; 
 	}
       else
 	{
@@ -147,7 +141,7 @@ i386_follow_jump ()
       pos += byte_delta + 2;
       break;
     }
-  codestream_seek (pos + data16);
+  codestream_seek (pos);
 }
 
 /*
@@ -252,6 +246,7 @@ i386_get_frame_setup (pc)
 	    }
 	  /* subl with 32 bit immediate */
 	  codestream_read ((unsigned char *)&locals, 4);
+	  SWAP_TARGET_AND_HOST (&locals, 4);
 	  return (locals);
 	}
       else
@@ -264,6 +259,7 @@ i386_get_frame_setup (pc)
       /* enter instruction: arg is 16 bit unsigned immed */
       unsigned short slocals;
       codestream_read ((unsigned char *)&slocals, 2);
+      SWAP_TARGET_AND_HOST (&slocals, 2);
       codestream_get (); /* flush final byte of enter instruction */
       return (slocals);
     }

gdb/remote.c

@@ -187,7 +187,6 @@ device is attached to the remote system (e.g. /dev/ttya).");
   if (from_tty)
     printf ("Remote debugging using %s\n", name);
   push_target (&remote_ops);	/* Switch to using remote target now */
-  start_remote ();		/* Initialize gdb process mechanisms */
 
 #ifndef HAVE_TERMIO
 #ifndef NO_SIGINTERRUPT
@@ -201,7 +200,11 @@ device is attached to the remote system (e.g. /dev/ttya).");
     perror ("remote_open: error in signal");
 #endif
 
+  /* Ack any packet which the remote side has already sent.  */
+  write (remote_desc, "+", 1);
   putpkt ("?");			/* initiate a query from remote machine */
+
+  start_remote ();		/* Initialize gdb process mechanisms */
 }
 
 /* remote_detach()

gdb/sun3-xdep.c

@@ -119,6 +119,7 @@ fetch_core_registers (core_reg_sect, core_reg_size, which)
 
     if (core_reg_size >= sizeof (struct fpu))
       {
+#ifdef FP0_REGNUM
 	bcopy (fpustruct->f_fpstatus.fps_regs,
 	      &registers[REGISTER_BYTE (FP0_REGNUM)],
 	      sizeof fpustruct->f_fpstatus.fps_regs);
@@ -126,6 +127,7 @@ fetch_core_registers (core_reg_sect, core_reg_size, which)
 	      &registers[REGISTER_BYTE (FPC_REGNUM)],
 	      sizeof fpustruct->f_fpstatus - 
 		sizeof fpustruct->f_fpstatus.fps_regs);
+#endif
       }
     else
       fprintf (stderr, "Couldn't read float regs from core file\n");

gdb/tm-i386v.h

@@ -191,8 +191,11 @@ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
 
 /* Return the GDB type object for the "standard" data type
    of data in register N.  */
-
+/* Perhaps si and di should go here, but potentially they could be
-#define REGISTER_VIRTUAL_TYPE(N) (builtin_type_int)
+   used for things other than address.  */
+#define REGISTER_VIRTUAL_TYPE(N) \
+  ((N) == PC_REGNUM || (N) == FP_REGNUM || (N) == SP_REGNUM ?         \
+   lookup_pointer_type (builtin_type_void) : builtin_type_int)
 
 /* Store the address of the place in which to copy the structure the
    subroutine will return.  This is called from call_function. */
@@ -308,5 +311,8 @@ the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
 	from = loc + 5; \
 	to = (int)(fun); \
 	delta = to - from; \
-	*(int *)((char *)(dummyname) + 1) = delta; \
+	*((char *)(dummyname) + 1) = (delta & 0xff); \
+	*((char *)(dummyname) + 2) = ((delta >> 8) & 0xff); \
+	*((char *)(dummyname) + 3) = ((delta >> 16) & 0xff); \
+	*((char *)(dummyname) + 4) = ((delta >> 24) & 0xff); \
 }

gdb/valops.c

@@ -511,6 +511,7 @@ push_word (sp, buffer)
 {
   register int len = sizeof (REGISTER_TYPE);
 
+  SWAP_TARGET_AND_HOST (&buffer, len);
 #if 1 INNER_THAN 2
   sp -= len;
   write_memory (sp, (char *)&buffer, len);
@@ -671,6 +672,9 @@ call_function_by_hand (function, nargs, args)
   register CORE_ADDR sp;
   register int i;
   CORE_ADDR start_sp;
+  /* CALL_DUMMY is an array of words (REGISTER_TYPE), but each word
+     in in host byte order.  It is switched to target byte order before calling
+     FIX_CALL_DUMMY.  */
   static REGISTER_TYPE dummy[] = CALL_DUMMY;
   REGISTER_TYPE dummy1[sizeof dummy / sizeof (REGISTER_TYPE)];
   CORE_ADDR old_sp;
@@ -717,6 +721,8 @@ call_function_by_hand (function, nargs, args)
   /* Create a call sequence customized for this function
      and the number of arguments for it.  */
   bcopy (dummy, dummy1, sizeof dummy);
+  for (i = 0; i < sizeof dummy / sizeof (REGISTER_TYPE); i++)
+    SWAP_TARGET_AND_HOST (&dummy1[i], sizeof (REGISTER_TYPE));
   FIX_CALL_DUMMY (dummy1, start_sp, funaddr, nargs, args,
 		  value_type, using_gcc);
 
@@ -1104,7 +1110,9 @@ value_struct_elt (argp, args, name, static_memfuncp, err)
     {
       arg1_as_ptr = *argp;
       *argp = value_ind (*argp);
-      COERCE_ARRAY (*argp);
+      /* Don't coerce fn pointer to fn and then back again!  */
+      if (TYPE_CODE (VALUE_TYPE (*argp)) != TYPE_CODE_FUNC)
+	COERCE_ARRAY (*argp);
       t = VALUE_TYPE (*argp);
     }