This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
This changes some functions in cli-script.c to use function_view
rather than a function pointer and closure argument. This simplifies
the code a bit and is useful in a subsequent patch.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* tracepoint.c (actions_command): Update.
* mi/mi-cmd-break.c (mi_command_line_array)
(mi_command_line_array_cnt, mi_command_line_array_ptr)
(mi_read_next_line): Remove.
(mi_cmd_break_commands): Update.
* cli/cli-script.h (read_command_lines, read_command_lines_1): Use
function_view.
* cli/cli-script.c (get_command_line): Update.
(process_next_line): Use function_view. Constify.
(recurse_read_control_structure, read_command_lines)
(read_command_lines_1): Change argument types to function_view.
(do_define_command, document_command): Update.
* breakpoint.h (check_tracepoint_command): Don't declare.
* breakpoint.c (check_tracepoint_command): Remove.
(commands_command_1, create_tracepoint_from_upload): Update.
Currently command lines are reference counted using shared_ptr only
when attached to breakpoints. This patch changes gdb to use
shared_ptr in commands as well. This allows for the removal of
copy_command_lines.
Note that the change to execute_user_command explicitly makes a new
reference to the command line. This will be used in a later patch.
This simplifies struct command_line based on the observation that a
given command can have at most two child bodies: an "if" can have both
"then" and "else" parts. Perhaps the names I've chosen for the
replacements here are not very good -- your input requested.
ChangeLog
2018-05-04 Tom Tromey <tom@tromey.com>
* tracepoint.c (all_tracepoint_actions): Rename from
all_tracepoint_actions_and_cleanup. Change return type.
(actions_command, encode_actions_1, encode_actions)
(trace_dump_actions, tdump_command): Update.
* remote.c (remote_download_command_source): Update.
* python/python.c (gdbpy_eval_from_control_command)
(python_command, python_interactive_command): Update.
* mi/mi-cmd-break.c (mi_cmd_break_commands): Update.
* guile/guile.c (guile_command)
(gdbscm_eval_from_control_command, guile_command): Update.
* compile/compile.c (compile_code_command)
(compile_print_command, compile_to_object): Update.
* cli/cli-script.h (struct command_lines_deleter): New.
(counted_command_line): New typedef.
(struct command_line): Add constructor, destructor.
<body_list>: Remove.
<body_list_0, body_list_1>: New members.
(command_line_up): Remove typedef.
(read_command_lines, read_command_lines_1, get_command_line):
Update.
(copy_command_lines): Don't declare.
* cli/cli-script.c (build_command_line): Use "new".
(get_command_line): Return counted_command_line.
(print_command_lines, execute_user_command)
(execute_control_command_1, while_command, if_command): Update.
(realloc_body_list): Remove.
(process_next_line, recurse_read_control_structure): Update.
(read_command_lines, read_command_lines_1): Return counted_command_line.
(free_command_lines): Use "delete".
(copy_command_lines): Remove.
(define_command, document_command, show_user_1): Update.
* cli/cli-decode.h (struct cmd_list_element) <user_commands>: Now
a counted_command_line.
* breakpoint.h (counted_command_line): Remove typedef.
(breakpoint_set_commands): Update.
* breakpoint.c (check_no_tracepoint_commands)
(validate_commands_for_breakpoint): Update.
(breakpoint_set_commands): Change commands to be a
counted_command_line.
(commands_command_1, update_dprintf_command_list)
(create_tracepoint_from_upload): Update.
This converts observers from using a special source-generating script
to be plain C++. This version of the patch takes advantage of C++11
by using std::function and variadic templates; incorporates Pedro's
patches; and renames the header file to "observable.h" (this change
eliminates the need for a clean rebuild).
Note that Pedro's patches used a template lambda in tui-hooks.c, but
this failed to compile on some buildbot instances (presumably due to
differing C++ versions); I replaced this with an ordinary template
function.
Regression tested on the buildbot.
gdb/ChangeLog
2018-03-19 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/observable-selftests.c: New file.
* common/observable.h: New file.
* observable.h: New file.
* ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c,
arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c,
breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c,
corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c,
extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c,
infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c,
linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c,
mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c,
ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c,
python/py-breakpoint.c, python/py-finishbreakpoint.c,
python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c,
record-btrace.c, record-full.c, record.c, regcache.c, remote.c,
riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c,
spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c,
symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c,
tui/tui-interp.c, valops.c: Update all users.
* tui/tui-hooks.c (tui_bp_created_observer)
(tui_bp_deleted_observer, tui_bp_modified_observer)
(tui_inferior_exit_observer, tui_before_prompt_observer)
(tui_normal_stop_observer, tui_register_changed_observer):
Remove.
(tui_observers_token): New global.
(attach_or_detach, tui_attach_detach_observers): New functions.
(tui_install_hooks, tui_remove_hooks): Use
tui_attach_detach_observers.
* record-btrace.c (record_btrace_thread_observer): Remove.
(record_btrace_thread_observer_token): New global.
* observer.sh: Remove.
* observer.c: Rename to observable.c.
* observable.c (namespace gdb_observers): Define new objects.
(observer_debug): Move into gdb_observers namespace.
(struct observer, struct observer_list, xalloc_observer_list_node)
(xfree_observer_list_node, generic_observer_attach)
(generic_observer_detach, generic_observer_notify): Remove.
(_initialize_observer): Update.
Don't include observer.inc.
* Makefile.in (generated_files): Remove observer.h, observer.inc.
(clean mostlyclean): Likewise.
(observer.h, observer.inc): Remove targets.
(SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c.
(COMMON_SFILES): Use observable.c, not observer.c.
* .gitignore: Remove observer.h.
gdb/doc/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* observer.texi: Remove.
gdb/testsuite/ChangeLog
2018-03-19 Tom Tromey <tom@tromey.com>
* gdb.gdb/observer.exp: Remove.
This patch teaches GDB about setting breakpoints in all scopes
(namespaces and classes) by default.
Here's a contrived example:
(gdb) b func<tab>
(anonymous namespace)::A::function() Bn::(anonymous namespace)::B::function() function(int, int)
(anonymous namespace)::B::function() Bn::(anonymous namespace)::function() gdb::(anonymous namespace)::A::function()
(anonymous namespace)::B::function() const Bn::(anonymous namespace)::function(int, int) gdb::(anonymous namespace)::function()
(anonymous namespace)::function() Bn::B::func() gdb::(anonymous namespace)::function(int, int)
(anonymous namespace)::function(int, int) Bn::B::function() gdb::A::func()
A::func() Bn::func() gdb::A::function()
A::function() Bn::function() gdb::func()
B::func() Bn::function(int, int) gdb::function()
B::function() Bn::function(long) gdb::function(int, int)
B::function() const func() gdb::function(long)
B::function_const() const function()
(gdb) b function
Breakpoint 1 at 0x4005ce: function. (26 locations)
(gdb) b B::function<tab>
(anonymous namespace)::B::function() B::function() const Bn::B::function()
(anonymous namespace)::B::function() const B::function_const() const
B::function() Bn::(anonymous namespace)::B::function()
(gdb) b B::function
Breakpoint 1 at 0x40072c: B::function. (6 locations)
To get back the original behavior of interpreting the function name as
a fully-qualified name, you can use the new "-qualified" (or "-q")
option/flag (added by this commit). For example:
(gdb) b B::function
(anonymous namespace)::B::function() B::function() const Bn::B::function()
(anonymous namespace)::B::function() const B::function_const() const
B::function() Bn::(anonymous namespace)::B::function()
vs:
(gdb) b -qualified B::function
B::function() B::function() const B::function_const() const
I've chosen "-qualified" / "-q" because "-f" (for "full" or
"fully-qualified") is already taken for "-function".
Note: the "-qualified" option works with both linespecs and explicit
locations. I.e., these are equivalent:
(gdb) b -q func
(gdb) b -q -f func
and so are these:
(gdb) b -q filename.cc:func
(gdb) b -q -s filename.cc -f func
(gdb) b -s filename.cc -q -f func
(gdb) b -s filename.cc -f func -q
To better understand why I consider wild matching the better default,
consider what happens when we get to the point when _all_ of GDB is
wrapped under "namespace gdb {}". I have a patch series that does
that, and when I started debugging that GDB, I immediately became
frustrated. You'd have to write "b gdb::internal_error", "b
gdb::foo", "b gdb::bar", etc. etc., which gets annoying pretty
quickly. OTOH, consider how this makes it very easy to set
breakpoints in classes wrapped in anonymous namespaces. You just
don't think of them, GDB finds the symbols for you automatically.
(At the Cauldron a couple months ago, several people told me that they
run into a similar issue when debugging other C++ projects. One
example was when debugging LLVM, which puts all its code under the
"llvm" namespace.)
Implementation-wise, what the patch does is:
- makes C++ symbol name hashing only consider the last component of
a symbol name. (so that we can look up symbol names by
last-component name only).
- adds a C++ symbol name matcher for symbol_name_match_type::WILD,
which ignores missing leading specifiers / components.
- adjusts a few preexisting testsuite tests to use "-qualified" when
they mean it.
- adds new testsuite tests.
- adds unit tests.
Grows the gdb.linespec/ tests like this:
-# of expected passes 7823
+# of expected passes 8977
gdb/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* NEWS: Mention that breakpoints on C++ functions are now set on
on all namespaces/classes by default, and mention "break
-qualified".
* ax-gdb.c (agent_command_1): Adjust to pass a
symbol_name_match_type to new_linespec_location.
* breakpoint.c (parse_breakpoint_sals): Adjust to
get_linespec_location's return type change.
(strace_marker_create_sals_from_location): Adjust to pass a
symbol_name_match_type to new_linespec_location.
(strace_marker_decode_location): Adjust to get_linespec_location's
return type change.
(strace_command): Adjust to pass a symbol_name_match_type to
new_linespec_location.
(LOCATION_HELP_STRING): Add paragraph about wildmatching, and
mention "-qualified".
* c-lang.c (cplus_language_defn): Install cp_search_name_hash.
* completer.c (explicit_location_match_type::MATCH_QUALIFIED): New
enumerator.
(complete_address_and_linespec_locations): New parameter
'match_type'. Pass it down.
(explicit_options): Add "-qualified".
(collect_explicit_location_matches): Pass the requested match type
to the linespec completers. Handle MATCH_QUALIFIED.
(location_completer): Handle "-qualified" combined with linespecs.
* cp-support.c (cp_search_name_hash): New.
(cp_symbol_name_matches_1): Implement wild matching for C++.
(cp_fq_symbol_name_matches): Reimplement.
(cp_get_symbol_name_matcher): Return different matchers depending
on the lookup name's match type.
(selftests::test_cp_symbol_name_matches): Add wild matching tests.
* cp-support.h (cp_search_name_hash): New declaration.
* dwarf2read.c
(selftests::dw2_expand_symtabs_matching::test_symbols): Add
symbols.
(test_dw2_expand_symtabs_matching_symbol): Add wild matching
tests.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Adjust to
pass a symbol_name_match_type to new_linespec_location.
* linespec.c (linespec_parse_basic): Lookup function symbols using
the parser's symbol name match type.
(convert_explicit_location_to_linespec): New
symbol_name_match_type parameter. Pass it down to
find_linespec_symbols.
(convert_explicit_location_to_sals): Pass the location's name
match type to convert_explicit_location_to_linespec.
(parse_linespec): New match_type parameter. Save it in the
parser.
(linespec_parser_new): Default to symbol_name_match_type::WILD.
(linespec_complete_function): New symbol_name_match_type
parameter. Use it.
(complete_linespec_component): Pass down the parser's recorded
name match type.
(linespec_complete_label): New symbol_name_match_type parameter.
Use it.
(linespec_complete): New symbol_name_match_type parameter. Save
it in the parser and pass it down. Adjust to
get_linespec_location's prototype change.
(find_function_symbols, find_linespec_symbols): New
symbol_name_match_type parameter. Pass it down instead of
assuming symbol_name_match_type::WILD.
* linespec.h (linespec_complete, linespec_complete_function)
(linespec_complete_label): New symbol_name_match_type parameter.
* location.c (event_location::linespec_location): Now a struct
linespec_location.
(EL_LINESPEC): Adjust.
(initialize_explicit_location): Default to
symbol_name_match_type::WILD.
(new_linespec_location): New symbol_name_match_type parameter.
Record it in the location.
(get_linespec_location): Now returns a struct linespec_location.
(new_explicit_location): Also copy func_name_match_type.
(explicit_to_string_internal)
(string_to_explicit_location): Handle "-qualified".
(copy_event_location): Adjust to LINESPEC_LOCATION type change.
Copy symbol_name_match_type fields.
(event_location_deleter::operator()): Adjust to LINESPEC_LOCATION
type change.
(event_location_to_string): Adjust to LINESPEC_LOCATION type
change. Handle "-qualfied".
(string_to_explicit_location): Handle "-qualified".
(string_to_event_location_basic): New symbol_name_match_type
parameter. Pass it down.
(string_to_event_location): Handle "-qualified".
* location.h (struct linespec_location): New.
(explicit_location::func_name_match_type): New field.
(new_linespec_location): Now returns a const linespec_location *.
(string_to_event_location_basic): New symbol_name_match_type
parameter.
(explicit_completion_info::saw_explicit_location_option): New
field.
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Adjust to pass a
symbol_name_match_type to new_linespec_location.
* python/py-breakpoint.c (bppy_init): Likewise.
* python/python.c (gdbpy_decode_line): Likewise.
gdb/testsuite/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* gdb.base/langs.exp: Use -qualified.
* gdb.cp/meth-typedefs.exp: Use -qualified, and add tests without
it.
* gdb.cp/namespace.exp: Use -qualified.
* gdb.linespec/cpcompletion.exp (overload-2, fqn, fqn-2)
(overload-3, template-overload, template-ret-type, const-overload)
(const-overload-quoted, anon-ns, ambiguous-prefix): New
procedures.
(test_driver): Call them.
* gdb.cp/save-bp-qualified.cc: New.
* gdb.cp/save-bp-qualified.exp: New.
* gdb.linespec/explicit.exp: Test -qualified.
* lib/completion-support.exp (completion::explicit_opts_list): Add
"-qualified".
* lib/gdb.exp (gdb_breakpoint): Handle "qualified".
gdb/doc/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Linespec Locations): Document how "function" is
interpreted in C++ and Ada. Document "-qualified".
(Explicit Locations): Document how "-function" is interpreted in
C++ and Ada. Document "-qualified".
This patch gets rid of catch_exceptions / catch_exceptions_with_msg.
The latter is done mostly by getting rid of the three remaining
vestigial libgdb wrapper functions, which are really pointless
nowadays. This results in a good number of simplifications.
(I checked that Insight doesn't use those functions.)
The gdb.mi/mi-pthreads.exp change is necessary because this actually
fixes a bug, IMO -- the patch stops MI's -thread-select causing output
on the CLI stream.
I.e., before:
-thread-select 123456789
&"Thread ID 123456789 not known.\n"
^error,msg="Thread ID 123456789 not known."
(gdb)
After:
-thread-select 123456789
^error,msg="Thread ID 123456789 not known."
(gdb)
gdb/ChangeLog
2017-10-10 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* breakpoint.c (struct captured_breakpoint_query_args)
(do_captured_breakpoint_query, gdb_breakpoint_query): Delete.
(print_breakpoint): New.
* breakpoint.h (print_breakpoint): Declare.
* common/common-exceptions.h (enum return_reason): Remove
references to catch_exceptions.
* exceptions.c (catch_exceptions, catch_exceptions_with_msg):
Delete.
* exceptions.h (catch_exceptions_ftype, catch_exceptions)
(catch_exception_ftype, catch_exceptions_with_msg): Delete.
* gdb.h: Delete.
* gdbthread.h (thread_select): Declare.
* mi/mi-cmd-break.c: Don't include gdb.h.
(breakpoint_notify): Use print_breakpoint.
* mi/mi-cmd-catch.c: Don't include gdb.h.
* mi/mi-interp.c: Don't include gdb.h.
(mi_print_breakpoint_for_event): New.
(mi_breakpoint_created, mi_breakpoint_modified): Use
mi_print_breakpoint_for_event.
* mi/mi-main.c: Don't include gdb.h.
(mi_cmd_thread_select): Parse the global thread ID here. Use
thread_select instead of gdb_thread_select.
(mi_cmd_thread_list_ids): Output "thread-ids" tuple here instead
of using gdb_list_thread_ids.
* remote-fileio.c (do_remote_fileio_request): Change type. Reply
FILEIO_ENOSYS here.
(remote_fileio_request): Use TRY/CATCH instead of
catch_exceptions.
* symfile-mem.c (struct symbol_file_add_from_memory_args)
(symbol_file_add_from_memory_wrapper): Delete.
(add_vsyscall_page): Use TRY/CATCH instead of catch_exceptions.
* thread.c: Don't include gdb.h.
(do_captured_list_thread_ids, gdb_list_thread_ids): Delete.
(thread_alive): Use thread_select.
(do_captured_thread_select): Delete, parts salvaged as ...
(thread_select): ... this new function.
(gdb_thread_select): Delete.
gdb/testsuite/ChangeLog
2017-10-10 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-pthreads.exp (check_mi_thread_command_set): Don't
expect CLI output.
This changes mi_argv_to_format to return a string, allowing the
removal of some cleanups.
gdb/ChangeLog
2017-09-29 Tom Tromey <tom@tromey.com>
* mi/mi-cmd-break.c (mi_argv_to_format): Return std::string.
(mi_cmd_break_insert_1): Update.
This changes setup_breakpoint_reporting to return a scoped_restore,
allowing for some cleanup removal.
ChangeLog
2017-09-11 Tom Tromey <tom@tromey.com>
* mi/mi-cmd-catch.c (mi_cmd_catch_assert)
(mi_cmd_catch_exception, mi_catch_load_unload): Update.
* mi/mi-cmd-break.c (setup_breakpoint_reporting): Return a
scoped_restore.
(mi_cmd_break_insert_1): Update.
* mi/mi-cmd-break.h (setup_breakpoint_reporting): Return a
scoped_restore.
We already have macro obstack_grow_str, which is helpful to shorten the
code.
gdb:
2017-06-28 Yao Qi <yao.qi@linaro.org>
* mi/mi-cmd-break.c (mi_argv_to_format): Use obstack_grow_str
instead of obstack_grow.
Breakpoints are currently in a limbo state between C and C++. There is
a pseudo class hierarchy implemented using struct fields. Taking
watchpoint as an example:
struct watchpoint
{
/* The base class. */
struct breakpoint base;
...
}
and it is instantianted with "new watchpoint ()". When destroyed, a
destructor is first invoked through the breakpoint_ops, and then the
memory is freed by calling delete through a pointer to breakpoint.
Address sanitizer complains about this, for example, because we new and
delete the same memory using different types.
This patch takes the logical step of making breakpoint subclasses extend
the breakpoint class for real, and converts their destructors to actual
C++ destructors.
Regtested on the buildbot.
gdb/ChangeLog:
* breakpoint.h (struct breakpoint_ops) <dtor>: Remove.
(struct breakpoint) <~breakpoint>: New.
(struct watchpoint): Inherit from breakpoint.
<~watchpoint>: New.
<base>: Remove.
(struct tracepoint): Inherit from breakpoint.
<base>: Remove.
* breakpoint.c (longjmp_breakpoint_ops): Remove.
(struct longjmp_breakpoint): Inherit from breakpoint.
<~longjmp_breakpoint>: New.
<base>: Remove.
(new_breakpoint_from_type): Remove casts.
(watchpoint_in_thread_scope): Remove reference to base field.
(watchpoint_del_at_next_stop): Likewise.
(update_watchpoint): Likewise.
(watchpoint_check): Likewise.
(bpstat_check_watchpoint): Likewise.
(set_longjmp_breakpoint): Likewise.
(struct fork_catchpoint): Inherit from breakpoint.
<base>: Remove.
(struct solib_catchpoint): Inherit from breakpoint.
<~solib_catchpoint>: New.
<base>: Remove.
(dtor_catch_solib): Change to ...
(solib_catchpoint::~solib_catchpoint): ... this.
(breakpoint_hit_catch_solib): Remove reference to base field.
(add_solib_catchpoint): Likewise.
(create_fork_vfork_event_catchpoint): Likewise.
(struct exec_catchpoint): Inherit from breakpoint.
<~exec_catchpoint>: New.
<base>: Remove.
(dtor_catch_exec): Change to ...
(exec_catchpoint::~exec_catchpoint): ... this.
(dtor_watchpoint): Change to ...
(watchpoint::~watchpoint): ... this.
(watch_command_1): Remove reference to base field.
(catch_exec_command_1): Likewise.
(base_breakpoint_dtor): Change to ...
(breakpoint::~breakpoint): ... this.
(base_breakpoint_ops): Remove dtor field value.
(longjmp_bkpt_dtor): Change to ...
(longjmp_breakpoint::~longjmp_breakpoint): ... this.
(strace_marker_create_breakpoints_sal): Remove reference to base
field.
(delete_breakpoint): Don't manually call breakpoint destructor.
(create_tracepoint_from_upload): Remove reference to base field.
(trace_pass_set_count): Likewise.
(initialize_breakpoint_ops): Don't initialize
momentary_breakpoint_ops, don't set dtors.
* ada-lang.c (struct ada_catchpoint): Inherit from breakpoint.
<~ada_catchpoint>: New.
<base>: Remove.
(create_excep_cond_exprs): Remove reference to base field.
(dtor_exception): Change to ...
(ada_catchpoint::~ada_catchpoint): ... this.
(dtor_catch_exception): Remove.
(dtor_catch_exception_unhandled): Remove.
(dtor_catch_assert): Remove.
(create_ada_exception_catchpoint): Remove reference to base
field.
(initialize_ada_catchpoint_ops): Don't set dtors.
* break-catch-sig.c (struct signal_catchpoint): Inherit from
breakpoint.
<~signal_catchpoint>: New.
<base>: Remove.
(signal_catchpoint_dtor): Change to ...
(signal_catchpoint::~signal_catchpoint): ... this.
(create_signal_catchpoint): Remove reference to base field.
(initialize_signal_catchpoint_ops): Don't set dtor.
* break-catch-syscall.c (struct syscall_catchpoint): Inherit
from breakpoint.
<~syscall_catchpoint>: New.
<base>: Remove.
(dtor_catch_syscall): Change to ...
(syscall_catchpoint::~syscall_catchpoint): ... this.
(create_syscall_event_catchpoint): Remove reference to base
field.
(initialize_syscall_catchpoint_ops): Don't set dtor.
* break-catch-throw.c (struct exception_catchpoint): Inherit
from breakpoint.
<~exception_catchpoint>: New.
<base>: Remove.
(dtor_exception_catchpoint): Change to ...
(exception_catchpoint::~exception_catchpoint): ... this.
(handle_gnu_v3_exceptions): Remove reference to base field.
(initialize_throw_catchpoint_ops): Don't set dtor.
* ctf.c (ctf_get_traceframe_address): Remove reference to base
field.
* remote.c (remote_get_tracepoint_status): Likewise.
* tracefile-tfile.c (tfile_get_traceframe_address): Likewise.
* tracefile.c (tracefile_fetch_registers): Likewise.
* tracepoint.c (actions_command): Likewise.
(validate_actionline): Likewise.
(tfind_1): Likewise.
(get_traceframe_location): Likewise.
(find_matching_tracepoint_location): Likewise.
(parse_tracepoint_status): Likewise.
* mi/mi-cmd-break.c (mi_cmd_break_passcount): Likewise.
This introduces command_line_up, a unique_ptr for command_line
objects, and changes many places to use it. This removes a number of
cleanups.
Command lines are funny in that sometimes they are reference counted.
Once there is more C++-ification of some of the users, perhaps all of
these can be changed to use shared_ptr instead.
gdb/ChangeLog
2017-04-12 Tom Tromey <tom@tromey.com>
* tracepoint.c (actions_command): Update.
* python/python.c (python_command, python_interactive_command):
Update.
* mi/mi-cmd-break.c (mi_cmd_break_commands): Update.
* guile/guile.c (guile_command): Update.
* defs.h (read_command_lines, read_command_lines_1): Return
command_line_up.
(command_lines_deleter): New struct.
(command_line_up): New typedef.
* compile/compile.c (compile_code_command)
(compile_print_command): Update.
* cli/cli-script.h (get_command_line, copy_command_lines): Return
command_line_up.
(make_cleanup_free_command_lines): Remove.
* cli/cli-script.c (get_command_line, read_command_lines_1)
(copy_command_lines): Return command_line_up.
(while_command, if_command, read_command_lines, define_command)
(document_command): Update.
(do_free_command_lines_cleanup, make_cleanup_free_command_lines):
Remove.
* breakpoint.h (breakpoint_set_commands): Change type of
"commands".
* breakpoint.c (breakpoint_set_commands): Change type of
"commands". Update.
(do_map_commands_command, update_dprintf_command_list)
(create_tracepoint_from_upload): Update.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
MI is currently using string_to_event_location to enable the use of legacy
linespecs, but using this function (until this patchset) had the (as yet
unnoticed) side effect of allowing both MI and CLI representation for
explicit locations.
This patch simply changes MI to use the same legacy linespec functions
that the python and guile interpreters use. This eliminates the CLI syntax
for explicit locations (in MI).
gdb/ChangeLog
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Use
string_to_event_location_basic instead of string_to_event_location.
BuildBot reminded me that "explicit" is a reserved keyword in C++.
This patch simply renames all the (illegal) uses of "explicit". This should
fix the build errors with --enable-build-with-cxx bots.
gdb/ChangeLog
* break-catch-throw.c (re_set_exception_catchpoint) Rename
reserved C++ keyword "explicit" to "explicit_loc".
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint, update_static_tracepoint):
Rename reserved C++ keyword "explicit" to "explicit_loc".
* completer.c (collect_explicit_location_matches)
(explicit_location_completer): Rename reserved C++ keyword
"explicit" to "explicit_loc".
* linespec.c (struct linespec) <explicit>: Rename to "explicit_loc".
(canonicalize_linespec, create_sals_line_offset)
(convert_linespec_to_sals, convert_explicit_location_to_sals)
(event_location_to_sals, decode_objc): Rename reserved C++ keyword
"explicit" to "explicit_loc".
* location.c (struct event_location) <explicit>: Rename to
"explicit_loc".
(initialize_explicit_location, new_explicit_location)
(explicit_location_to_string_internal, explicit_location_to_linespec):
Rename reserved C++ keyword "explicit" to "explicit_loc".
* location.h (explicit_location_to_string)
(explicit_location_to_linespec, initialize_explicit_location)
(new_explicit_location): Rename reserved C++ keyword "explicit"
to "explicit_loc".
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Rename reserved C++
keyword "explicit" to "explicit_loc".
This patch adds support for explicit locations to MI's -break-insert
command. The new options, documented in the User Manual, are
--source, --line, --function, and --label.
gdb/ChangeLog:
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Add support for
explicit locations, options "--source", "--function",
"--label", and "--line".
gdb/testsuite/ChangeLog:
* gdb.mi/mi-break.exp (test_explicit_breakpoints): New proc.
(at toplevel): Call test_explicit_breakpoints.
* gdb.mi/mi-dprintf.exp: Add tests for explicit dprintf
breakpoints.
* lib/mi-support.exp (mi_make_breakpoint): Add support for
breakpoint conditions, "-cond".
This patch converts the code base to use the new struct event_location
API being introduced. This patch preserves the current functionality and
adds no new features.
The "big picture" API usage introduced by this patch may be illustrated
with a simple exmaple. Where previously developers would write:
void
my_command (char *arg, int from_tty)
{
create_breakpoint (..., arg, ...);
...
}
one now uses:
void
my_command (char *arg, int from_tty)
{
struct event_locaiton *location;
struct cleanup *back_to;
location = string_to_event_locaiton (&arg, ...);
back_to = make_cleanup_delete_event_location (location);
create_breakpoint (..., location, ...);
do_cleanups (back_to);
}
Linespec-decoding functions (now called location-decoding) such as
decode_line_full no longer skip argument pointers over processed input.
That functionality has been moved into string_to_event_location as
demonstrated above.
gdb/ChangeLog
* ax-gdb.c: Include location.h.
(agent_command_1) Use linespec location instead of address
string.
* break-catch-throw.c: Include location.h.
(re_set_exception_catchpoint): Use linespec locations instead
of address strings.
* breakpoint.c: Include location.h.
(create_overlay_event_breakpoint, create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint, update_breakpoints_after_exec):
Use linespec location instead of address string.
(print_breakpoint_location): Use locations and
event_location_to_string.
Print extra_string for pending locations for non-MI streams.
(print_one_breakpoint_location): Use locations and
event_location_to_string.
(init_raw_breakpoint_without_location): Initialize b->location.
(create_thread_event_breakpoint): Use linespec location instead of
address string.
(init_breakpoint_sal): Likewise.
Only save extra_string if it is non-NULL and not the empty string.
Use event_location_to_string instead of `addr_string'.
Constify `p' and `endp'.
Use skip_spaces_const/skip_space_const instead of non-const versions.
Copy the location into the breakpoint.
If LOCATION is NULL, save the breakpoint address as a linespec location
instead of an address string.
(create_breakpoint_sal): Change `addr_string' parameter to a struct
event_location. All uses updated.
(create_breakpoints_sal): Likewise for local variable `addr_string'.
(parse_breakpoint_sals): Use locations instead of address strings.
Remove check for empty linespec with conditional.
Refactor.
(decode_static_tracepoint_spec): Make argument const and update
function.
(create_breakpoint): Change `arg' to a struct event_location and
rename.
Remove `copy_arg' and `addr_start'.
If EXTRA_STRING is empty, set it to NULL.
Don't populate `canonical' for pending breakpoints.
Pass `extra_string' to find_condition_and_thread.
Clear `extra_string' if `rest' was NULL.
Do not error with "garbage after location" if setting a dprintf
breakpoint.
Copy the location into the breakpoint instead of an address string.
(break_command_1): Use string_to_event_location and pass this to
create_breakpoint instead of an address string.
Check against `arg_cp' for a probe linespec.
(dprintf_command): Use string_to_event_location and pass this to
create_breakpoint instead of an address string.
Throw an exception if no format string was specified.
(print_recreate_ranged_breakpoint): Use event_location_to_string
instead of address strings.
(break_range_command, until_break_command)
(init_ada_exception_breakpoint): Use locations instead
of address strings.
(say_where): Print out extra_string for pending locations.
(base_breakpoint_dtor): Delete `location' and `location_range_end' of
the breakpoint.
(base_breakpoint_create_sals_from_location): Use struct event_location
instead of address string.
Remove `addr_start' and `copy_arg' parameters.
(base_breakpoint_decode_location): Use struct event_location instead of
address string.
(bkpt_re_set): Use locations instead of address strings.
Use event_location_empty_p to check for unset location.
(bkpt_print_recreate): Use event_location_to_string instead of
an address string.
Print out extra_string for pending locations.
(bkpt_create_sals_from_location, bkpt_decode_location)
(bkpt_probe_create_sals_from_location): Use struct event_location
instead of address string.
(bkpt_probe_decode_location): Use struct event_location instead of
address string.
(tracepoint_print_recreate): Use event_location_to_string to
recreate the tracepoint.
(tracepoint_create_sals_from_location, tracepoint_decode_location)
(tracepoint_probe_create_sals_from_location)
(tracepoint_probe_decode_location): Use struct event_location
instead of address string.
(dprintf_print_recreate): Use event_location_to_string to recreate
the dprintf.
(dprintf_re_set): Remove check for valid/missing format string.
(strace_marker_create_sals_from_location)
(strace_marker_create_breakpoints_sal, strace_marker_decode_location)
(update_static_tracepoint): Use struct event_location instead of
address string.
(location_to_sals): Likewise.
Pass `extra_string' to find_condition_and_thread.
For newly resolved pending breakpoint locations, clear the location's
string representation.
Assert that the breakpoint's condition string is NULL when
condition_not_parsed.
(breakpoint_re_set_default, create_sals_from_location_default)
(decode_location_default, trace_command, ftrace_command)
(strace_command, create_tracepoint_from_upload): Use locations
instead of address strings.
* breakpoint.h (struct breakpoint_ops) <create_sals_from_location>:
Use struct event_location instead of address string.
Update all uses.
<decode_location>: Likewise.
(struct breakpoint) <addr_string>: Change to struct event_location
and rename `location'.
<addr_string_range_end>: Change to struct event_location and rename
`location_range_end'.
(create_breakpoint): Use struct event_location instead of address
string.
* cli/cli-cmds.c: Include location.h.
(edit_command, list_command): Use locations instead of address strings.
* elfread.c: Include location.h.
(elf_gnu_ifunc_resolver_return_stop): Use event_location_to_string.
* guile/scm-breakpoint.c: Include location.h.
(bpscm_print_breakpoint_smob): Use event_location_to_string.
(gdbscm_register_breakpoint): Use locations instead of address
strings.
* linespec.c: Include location.h.
(struct ls_parser) <stream>: Change to const char *.
(PARSER_STREAM): Update.
(lionespec_lexer_lex_keyword): According to find_condition_and_thread,
keywords must be followed by whitespace.
(canonicalize_linespec): Save a linespec location into `canonical'.
Save a canonical linespec into `canonical'.
(parse_linespec): Change `argptr' to const char * and rename `arg'.
All uses updated.
Update function description.
(linespec_parser_new): Initialize `parser'.
Update initialization of parsing stream.
(event_location_to_sals): New function.
(decode_line_full): Change `argptr' to a struct event_location and
rename it `location'.
Use locations instead of address strings.
Call event_location_to_sals instead of parse_linespec.
(decode_line_1): Likewise.
(decode_line_with_current_source, decode_line_with_last_displayed)
Use locations instead of address strings.
(decode_objc): Likewise.
Change `argptr' to const char * and rename `arg'.
(destroy_linespec_result): Delete the linespec result's location
instead of freeing the address string.
* linespec.h (struct linespec_result) <addr_string>: Change to
struct event_location and rename to ...
<location>: ... this.
(decode_line_1, decode_line_full): Change `argptr' to struct
event_location. All callers updated.
* mi/mi-cmd-break.c: Include language.h, location.h, and linespec.h.
(mi_cmd_break_insert_1): Use locations instead of address strings.
Throw an error if there was "garbage" at the end of the specified
linespec.
* probe.c: Include location.h.
(parse_probes): Change `argptr' to struct event_location.
Use event locations instead of address strings.
* probe.h (parse_probes): Change `argptr' to struct event_location.
* python/py-breakpoint.c: Include location.h.
(bppy_get_location): Constify local variable `str'.
Use event_location_to_string.
(bppy_init): Use locations instead of address strings.
* python/py-finishbreakpoint.c: Include location.h.
(bpfinishpy_init): Remove local variable `addr_str'.
Use locations instead of address strings.
* python/python.c: Include location.h.
(gdbpy_decode_line): Use locations instead of address strings.
* remote.c: Include location.h.
(remote_download_tracepoint): Use locations instead of address
strings.
* spu-tdep.c: Include location.h.
(spu_catch_start): Remove local variable `buf'.
Use locations instead of address strings.
* tracepoint.c: Include location.h.
(scope_info): Use locations instead of address strings.
(encode_source_string): Constify parameter `src'.
* tracepoint.h (encode_source_string): Likewise.
gdb/testsuite/ChangeLog
* gdb.base/dprintf-pending.exp: Update dprintf "without format"
test.
Add tests for missing ",FMT" and ",".
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
They are equivalent to "catch load" and "catch unload" from CLI.
Rationale: GUIs might be interested in catching solib load or
unload events.
2012-11-16 Mircea Gherzan <mircea.gherzan@intel.com>
* Makefile.in (SUBDIR_MI_OBS): Add mi-cmd-catch.o.
(SUBDIR_MI_SRCS): Add mi/mi-cmd-catch.c.
* breakpoint.c (add_solib_catchpoint): New function that
can be used by both CLI and MI, factored out from
catch_load_or_unload.
(catch_load_or_unload): Strip it down and make it use the
new add_solib_catchpoint.
* breakpoint.h (add_solib_catchpoint): Declare it.
* mi/mi-cmd-break.h: New file.
* mi/mi-cmd-break.c: Include mi-cmd-break.h.
(setup_breakpoint_reporting): New function used for both
catchpoints and breakpoints.
(mi_cmd_break_insert): Use setup_breakpoint_reporting.
* mi/mi-cmd-catch.c: New file.
* mi/mi-cmds.c (mi_cmds): Add the handlers for -catch-load
and -catch-unload.
* mi/mi-cmds.h: Declare the handlers for -catch-load and
-catch-unload.
Implement most breakpoint_ops methods for all breakpoint types,
and move the default handlings to the proper callbacks.
gdb/
* breakpoint.c (update_watchpoint): Always call the breakpoint's
works_in_software_mode method.
(insert_bp_location): Go through breakpoint_ops->insert_location
for software and hardware watchpoints.
(create_internal_breakpoint): Pass bkpt_breakpoint_ops as
breakpoint_ops.
(remove_breakpoint_1): Go through breakpoint_ops->remove_location
for software and hardware watchpoints.
(print_it_typical): Delete.
(print_bp_stop_message): Always call the breakpoint_ops->print_it
method.
(watchpoint_check): Adjust comment.
(bpstat_check_location): Simply always call the breakpoint's
breakpoint_hit method.
(bpstat_stop_status): Always call the breakpoint's check_status
method. Remove special cases for watchpoints and internal event
breakpoints from here (moved to the check_status implementations).
(print_one_breakpoint_location): Assume b->ops is never NULL.
Remove static tracepoint marker id printing from here (moved to
the print_one_detail callback implementation of tracepoints).
(init_bp_location): Assert OPS is never NULL.
(allocate_bp_location): Always call the breakpoint's
allocate_location method, and remove the default code from here.
(free_bp_location): Always call the location's dtor method, and
remove the default code from here.
(init_raw_breakpoint_without_location): Assert OPS is never NULL.
(set_raw_breakpoint_without_location): Add new breakpoint_ops
parameter. Pass it down.
(set_raw_breakpoint): Ditto.
(print_it_catch_fork): Adjust to take a bpstat as argument.
(catch_fork_breakpoint_ops): Install methods.
(print_it_catch_vfork): Adjust to take a bpstat as argument.
(catch_vfork_breakpoint_ops): Install methods.
(dtor_catch_syscall): Call the base dtor.
(print_it_catch_syscall): Adjust to take a bpstat as argument.
(catch_syscall_breakpoint_ops): Install methods.
(dtor_catch_exec): Call the base dtor.
(print_it_catch_exec): Adjust to take a bpstat as argument.
(catch_exec_breakpoint_ops): Install methods.
(hw_breakpoint_used_count, hw_watchpoint_used_count): Always call
the breakpoint's resources_needed method, and remove the default
code from here.
(set_momentary_breakpoint): Pass bkpt_breakpoint_ops as
breakpoint_ops.
(clone_momentary_breakpoint): Clone the original's ops.
(mention): Always call the breakpoint's print_mention method, and
remove the default code from here.
(create_breakpoint_sal): Adjust to pass the ops to
set_raw_breakpoint rather than setting it manually.
(create_breakpoint): Assert ops is never NULL. Adjust to pass the
ops to set_raw_breakpoint_without_location rather than setting it
manually.
(break_command_1): Pass bkpt_breakpoint_ops as breakpoint_ops.
(print_it_ranged_breakpoint): Adjust to take a bpstat as argument.
(ranged_breakpoint_ops): Install methods.
(break_range_command): Adjust to pass the ops to
set_raw_breakpoint rather than setting it manually.
(re_set_watchpoint, breakpoint_hit_watchpoint)
(check_status_watchpoint, resources_needed_watchpoint)
(works_in_software_mode_watchpoint, print_it_watchpoint)
(print_mention_watchpoint, print_recreate_watchpoint): New
functions.
(watchpoint_breakpoint_ops): Install new methods.
(print_it_masked_watchpoint): New function.
(masked_watchpoint_breakpoint_ops): Install new methods.
(watch_command_1): Adjust to pass the right breakpoint_ops to
set_raw_breakpoint_without_location rather than setting it
manually later. Record the current pspace.
(print_it_exception_catchpoint): Adjust to take a bpstat as
argument.
(gnu_v3_exception_catchpoint_ops): Install new methods.
(say_where): New function.
(null_re_set, null_check_status, null_works_in_software_mode)
(null_resources_needed, null_print_one_detail, bp_location_dtor):
New functions.
(bp_location_ops): New global.
(bkpt_dtor, bkpt_allocate_location, bkpt_re_set)
(bkpt_insert_location, bkpt_remove_location, bkpt_breakpoint_hit)
(bkpt_check_status, bkpt_resources_needed)
(bkpt_works_in_software_mode, bkpt_print_it, bkpt_print_mention)
(bkpt_print_recreate): New functions.
(bkpt_breakpoint_ops): New global.
(tracepoint_re_set, tracepoint_insert_location)
(tracepoint_remove_location, tracepoint_breakpoint_hit)
(tracepoint_check_status, tracepoint_works_in_software_mode)
(tracepoint_print_it, tracepoint_print_one_detail)
(tracepoint_print_mention, tracepoint_print_recreate): New
functions.
(tracepoint_breakpoint_ops): New global.
(delete_breakpoint): Always call the breakpoint's dtor method, and
remove the default handling from here.
(breakpoint_re_set_default): Make static.
(breakpoint_re_set_one): Always call the breakpoints re_set
method, and remove the default handling from here.
(trace_command, ftrace_command, strace_command)
(create_tracepoint_from_upload): Pass appropriate breakpoints_ops
to create_breakpoint.
(save_breakpoints): Always call the breakpoint's print_recreate
method, and remove the default handling from here.
* ada-lang.c (dtor_exception): Call the base dtor.
(re_set_exception): Call the base method.
(print_it_exception, print_it_catch_exception): Adjust to take a
bpstat as argument.
(catch_exception_breakpoint_ops): Install methods.
(print_it_catch_exception_unhandled): Adjust to take a bpstat as
argument.
(catch_exception_unhandled_breakpoint_ops): Install methods.
(print_it_catch_assert): Adjust to take a bpstat as argument.
(catch_assert_breakpoint_ops): Install methods.
* breakpoint.h (struct breakpoint_ops): Adjust the print_it method
to take a bpstat as argument.
(enum print_stop_action): Add describing comments to each enum
value.
(breakpoint_re_set_default): Delete declaration.
(null_re_set, null_works_in_software_mode, null_resources_needed)
(null_check_status, null_print_one_detail): Declare.
(bkpt_breakpoint_ops): Declare.
(bkpt_dtor, bkpt_allocate_location, bkpt_re_set)
(bkpt_insert_location, bkpt_remove_location, bkpt_breakpoint_hit)
(bkpt_check_status, bkpt_resources_needed)
(bkpt_works_in_software_mode, bkpt_print_it)
(null_print_one_detail, bkpt_print_mention, bkpt_print_recreate):
Declare.
* mi/mi-cmd-break.c (mi_cmd_break_insert): Adjust to pass
bkpt_breakpoint_ops.
* python/py-breakpoint.c (bppy_init): Ditto.