Now that the AMD64 check in match_template() applies to 64-bit code
only, the non-64-bit and the Amd64 template can be folded, as being
otherwise compatible with one another. (Oddly enough the same doesn't
apply to CALL, due to the suffixes it permits, while JMP doesn't
allow for any.)
AMD and Intel differ in their handling of far indirect branches as well
as LFS/LGS/LSS: AMD CPUs ignore REX.W while Intel ones honors it. (Note
how the latter three were hybrids so far, while far branches were fully
AMD-like.)
Correct fallout from commit 919adfe840 ("Move gdbserver to top level")
and revert to not building `gdbserver' in a cross-configuration, that is
where host != target, matching the documented behaviour. We have no way
to support non-native `gdbserver', and native `gdbserver' is usually of
no use with cross-GDB of the chosen host.
gdbserver/ChangeLog:
2020-02-12 Maciej W. Rozycki <macro@wdc.com>
Pedro Alves <palves@redhat.com>
Skip building gdbserver in a cross-configuration.
* configure.srv: Set $gdbserver_host depending on whether $target
is $host. Use $gdbserver_host instead of $host.
When using configure flag --with-iconv-bin=$(which iconv), we run into:
...
gdb/charset.c: In function 'void find_charset_names()':
gdb/charset.c:821:75: error: missing sentinel in function call [-Werror=format=]
iconv_program = concat (iconv_dir.c_str(), SLASH_STRING, "iconv", NULL);
^
cc1plus: all warnings being treated as errors
...
Fix the warning.
Build and reg-tested on x86_64-linux.
2020-02-12 Lukas Durfina <ldurfina@tachyum.com>
Tom de Vries <tdevries@suse.de>
* charset.c (find_charset_names): Cast concat NULL sentinel to char *.
Along the lines of be4c5e58bd ("x86: Always disallow double word suffix
with word general register") also adjust check_{byte,word}_reg(), to make
overall behavior consistent again in this regard.
The diagnostics issued by check_*_reg() are pretty AT&T-centric. Re-use
logic already used for SIMD memory operand size checking also for ones
where GPRs would alternatively also be allowed. (There's certainly room
for further improvement here.)
This updates a comment in psymtab.h to reflect the current reality.
gdb/ChangeLog
2020-02-11 Tom Tromey <tom@tromey.com>
* psymtab.h: Update comment.
Change-Id: I438bb5929c3ebd1a4c6e9a902490f2ef63014ab3
Add DISABLE_COPY_AND_ASSIGN to struct auto_obstack, to prevent copying
it. Copying an auto_obstack would be a bug.
2020-02-11 Tom Tromey <tom@tromey.com>
* gdb_obstack.h (struct auto_obstack): Use
DISABLE_COPY_AND_ASSIGN.
Change-Id: Ic9e5ab20acfcfa61c241fed4d99bbb1caefba3cd
dwarf2/frame.h forward-declares struct objfile, but there's no need
for this.
gdb/ChangeLog
2020-02-11 Tom Tromey <tom@tromey.com>
* dwarf2/frame.h (struct objfile): Don't forward declare.
Change-Id: I4d54d46ac9422eeb64dc5f0b934792e77a875aa5
Since plugin treats each object as independent, we must do a fresh dlopen
of plugin for each object.
PR binutils/25355
* plugin.c (try_claim): Always clean up for LTO wrapper.
(try_load_plugin): Treat each object as independent. Create a
copy for plugin name.
The non-deprecated equivalent is implementing the gdbarch function
iterate_over_regset_sections, this patch does that.
Tested by generating a core file on cris under qemu and comparing
the output of "info registers".
This also fixes this warning when loading cris core files:
warning: Unexpected size of section `.reg/164' in core file.
gdb/ChangeLog:
2020-02-11 Christian Biesinger <cbiesinger@google.com>
* cris-tdep.c (cris_supply_gregset): Change signature to match
what struct regset expects.
(cris_regset): New struct.
(fetch_core_registers): Remove.
(cris_iterate_over_regset_sections): New function.
(_initialize_cris_tdep): Don't call deprecated_add_core_fns.
(cris_gdbarch_init): Call set_gdbarch_iterate_over_regset_sections.
Change-Id: Ieef895b5a2fdc797d1a913cd1c0c07563edfe8e7
I'm dealing with a Fedora GDB bug that is related to PR tui/25126, and
I thought I'd write a specific testcase for it because I couldn't find
one.
The idea is to get the simple reproducer from the bug and tweak the
testcase around it. This one was a bit hard because, since we need to
modify the source file and recompile it, it involved a bit of TCL-foo
to do things. Also for this reason, I'm only enabling the test for
native boards.
I tested this with an upstream GDB and made sure everything is
passing. I also tested with a faulty GDB and made sure the test
failed.
gdb/testsuite/ChangeLog:
2020-02-11 Sergio Durigan Junior <sergiodj@redhat.com>
PR tui/25126
https://bugzilla.redhat.com/show_bug.cgi?id=1784210
* gdb.base/cached-source-file.c: New file.
* gdb.base/cached-source-file.exp: New file.
Change-Id: Ib1b074342ebe8613c6d1dfde631691ebdf6d81c6
These are for the obsolete FPA architecture.
gdb/ChangeLog:
2020-02-11 Christian Biesinger <cbiesinger@google.com>
* arch/arm.h (enum gdb_regnum): Add comment for the FP0..7
registers.
Change-Id: I6920616318ee637493d4ca12b91fa2ebcd103d76
In my previous commit, I did a last minute modification of warning.m4,
but forgot to re-generate the configure scripts, this commit fixes that.
gdb/ChangeLog:
* configure: Re-generate.
gdbserver/ChangeLog:
* configure: Re-generate.
gdbsupport/ChangeLog:
* configure: Re-generate.
Commit 85f0dd3ce ("[gdb] Fix -Wstrict-null-sentinel warnings") fixed
some violations of -Wstrict-null-sentinel. If we want to enforce this
warning, I think we should enable it in our warning.m4 file.
gdbsupport/ChangeLog:
* warning.m4: Add -Wstrict-null-sentinel.
* configure: Re-generate.
gdbserver/ChangeLog:
* configure: Re-generate.
gdb/ChangeLog:
* configure: Re-generate.
This file is used by gdbsupport, gdbserver and gdb, so I think it
belongs in gdbsupport. Move it there and update the references the
various acinclude.m4 files.
gdbsupport/ChangeLog:
* warning.m4: Move here, from gdb/warning.m4.
* acinclude.m4: Update warning.m4 path.
* Makefile.in: Re-generate.
gdbserver/ChangeLog:
* acinclude.m4: Update warning.m4 path.
gdb/ChangeLog:
* acinclude: Update warning.m4 path.
* warning.m4: Move to gdbsupport.
Since gdbsupport has been given its own build system, it is no longer
compiled with the warning flags specified in gdb/warning.m4.
This patch makes it use AM_GDB_WARNINGS.
gdbsupport/ChangeLog:
* acinclude.m4: Include ../gdb/warning.m4.
* configure.ac: Use AM_GDB_WARNINGS.
* Makefile.am: Set AM_CFLAGS to WARN_CFLAGS and WERROR_CFLAGS.
* Makefile.in: Re-generate.
* configure: Re-generate.
My previous patch introduced the use of a C99 feature. C99 standard is
not required for gas, so this feature should be removed.
Committed as obvious.
gas/ChangeLog:
2020-02-11 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (vcx_handle_register_arguments): Remove `for`
loop initial declaration.
The test-case gdb.server/server-kill-python.exp runs fine by itself:
...
Running src/gdb/testsuite/gdb.server/server-kill-python.exp ...
=== gdb Summary ===
nr of expected passes 3
...
But if we run f.i. gdb.server/file-transfer.exp before it, we get instead:
...
Running src/gdb/testsuite/gdb.server/server-kill-python.exp ...
ERROR: GDB process no longer exists
=== gdb Summary ===
nr of expected passes 13
nr of unresolved testcases 1
...
We can see the origin of the problem here:
...
spawn gdbserver --once localhost:2347 \
build/gdb/testsuite/outputs/gdb.server/file-transfer/file-transfer \
build/gdb/testsuite/outputs/gdb.server/server-kill-python/server-kill-python^M
Process build/gdb/testsuite/outputs/gdb.server/file-transfer/file-transfer
\ created; pid = 9464^M
Listening on port 2347^M
...
The spawn of the gdbserver for the server-kill-python test-case gets as
executable argument the file-transfer binary.
This is caused by proc gdbserver_spawn attempting to load the exec file in
$file_last_loaded. This is something that is meant to load the same exec in
the gdbserver that was earlier loaded into gdb.
In this test-case however, nothing has been loaded into gdb by the test-case,
and consequently we load the file that was loaded into gdb in the previous
test-case.
Fix this by unsetting $file_last_loaded in gdb_init.
Build and reg-tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-02-11 Tom de Vries <tdevries@suse.de>
PR testsuite/25488
* lib/gdb.exp (gdb_init): Unset $file_last_loaded.
Change-Id: Ic385e08cbd34cbf85518720cf5695b4ff6619f4b
GCC LTO wrapper is needed to extract real symbols from LTO IR objects.
This patch does the following:
1. Set up GCC LTO wrapper for each LTO IR object.
2. Run GCC LTO wrapper to get the real object.
3. Extract symbol info from the real object.
4. Cleanup afterwards.
bfd/
PR binutils/25355
* configure.ac (HAVE_EXECUTABLE_SUFFIX): New AC_DEFINE.
(EXECUTABLE_SUFFIX): Likewise.
* config.in: Regenerated.
* configure: Likewise.
* plugin.c (bfd_plugin_close_and_cleanup): Removed.
(plugin_list_entry): Add all_symbols_read, cleanup_handler,
gcc, lto_wrapper, resolution_file, resolution_option, gcc_env,
real_bfd, real_nsyms, real_syms, lto_nsyms and lto_syms.
(get_lto_wrapper): New.
(setup_lto_wrapper_env): Likewise.
(current_plugin): Likewise.
(register_all_symbols_read): Likewise.
(register_cleanup): Likewise.
(get_symbols): Likewise.
(add_input_file): Likewise.
(bfd_plugin_close_and_cleanup): Likewise.
(claim_file): Removed.
(register_claim_file): Set current_plugin->claim_file.
(add_symbols): Make a copy of LTO symbols. Set lto_nsyms and
lto_syms in current_plugin.
(try_claim): Use current_plugin->claim_file. Call LTO plugin
all_symbols_read handler. Copy real symbols to plugin_data.
Call LTO plugin cleanup handler. Clean up for LTO wrapper.
(try_load_plugin): Don't reuse the previous plugin for LTO
wrapper. Set up GCC LTO wrapper if possible. Don't set
plugin_list_iter->claim_file.
(bfd_plugin_canonicalize_symtab): Use real LTO symbols if
possible.
* plugin.h (plugin_data_struct): Add real_bfd, real_nsyms and
real_syms.
ld/
PR binutils/25355
* testsuite/ld-plugin/lto.exp: Run PR binutils/25355 test.
* testsuite/ld-plugin/pr25355.c: New file.
* testsuite/ld-plugin/pr25355.d: Likewise.
* testsuite/lib/ld-lib.exp (run_cc_link_tests): Support compile
only dump.
This patch fixes execution failures which occur when the BR in a
sequence such as:
J<cond> 1f
BR
1:
is relaxed to a JMP, and the pc-relative offset for the destination of
the J<cond> instruction is hard-coded to be 2 words ahead of the
instruction.
The hard-coded offset will cause execution to jump 1 word ahead of where
it should actually go.
Instead we now detect the hard-coded offset is one we inserted earlier,
and invert the condition, allowing us to remove the BR entirely.
bfd/ChangeLog:
2020-02-10 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* elf32-msp430.c (msp430_elf_relax_section): Before relaxing a branch,
check if previous instruction matches a conditional jump inserted
earlier. Invert conditional jump and delete branch in this case.
This patch fixes relocation overflows caused by an inability to relax
unconditional JMP instructions to BR instructions.
bfd/ChangeLog:
2020-02-10 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* elf32-msp430.c (msp430_elf_relax_add_two_words): Rename to
msp430_elf_relax_add_words. Support insertion of either one or two
words.
(msp430_elf_relax_section): Catch opcode of 0x3c00 when relocation
needs to be grown. Handle insertion of branch instruction to replace
jump.
Here we implement the custom datapath extensions for MVE.
This required the following changes:
- Adding a new register argument type (that takes either an MVE vector or
a Neon S or D register).
- Adding two new immediate operands types (0-127 and 0-4095).
- Using the Neon type machinery to distinguish between instruction
types. This required the introduction of new neon shapes to account
for the coprocessor operands to these instructions.
- Adding a new disassembly character to `print_insn_cde` to handle the
new register types.
Specification can be found at
https://developer.arm.com/docs/ddi0607/latest
Successfully regression tested on arm-none-eabi, and arm-wince-pe.
gas/ChangeLog:
2020-02-10 Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (NEON_MAX_TYPE_ELS): Increment to account for
instructions that can have 5 arguments.
(enum operand_parse_code): Add new operands.
(parse_operands): Account for new operands.
(S5): New macro.
(enum neon_shape_el): Introduce P suffixes for coprocessor.
(neon_select_shape): Account for P suffix.
(LOW1): Move macro to global position.
(HI4): Move macro to global position.
(vcx_assign_vec_d): New.
(vcx_assign_vec_m): New.
(vcx_assign_vec_n): New.
(enum vcx_reg_type): New.
(vcx_get_reg_type): New.
(vcx_size_pos): New.
(vcx_vec_pos): New.
(vcx_handle_shape): New.
(vcx_ensure_register_in_range): New.
(vcx_handle_register_arguments): New.
(vcx_handle_insn_block): New.
(vcx_handle_common_checks): New.
(do_vcx1): New.
(do_vcx2): New.
(do_vcx3): New.
* testsuite/gas/arm/cde-missing-fp.d: New test.
* testsuite/gas/arm/cde-missing-fp.l: New test.
* testsuite/gas/arm/cde-missing-mve.d: New test.
* testsuite/gas/arm/cde-missing-mve.l: New test.
* testsuite/gas/arm/cde-mve-or-neon.d: New test.
* testsuite/gas/arm/cde-mve-or-neon.s: New test.
* testsuite/gas/arm/cde-mve.s: New test.
* testsuite/gas/arm/cde-warnings.l:
* testsuite/gas/arm/cde-warnings.s:
* testsuite/gas/arm/cde.d:
* testsuite/gas/arm/cde.s:
opcodes/ChangeLog:
2020-02-10 Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (print_insn_cde): Define 'V' parse character.
(cde_opcodes): Add VCX* instructions.
This patch is part of a series that adds support for the Armv8.m
ARMv8.m Custom Datapath Extension to binutils.
This patch introduces the Custom Instructions Class 1/2/3 (Single/
Dual, Accumulator/Non-accumulator varianats) to the arm backend.
The following Custom Instructions are added: cx1, cx1a,
cx1d, cx1da, cx2, cx2a, cx2d, cx2da, cx3, cx3a, cx3d, cx3da.
Specification can be found at
https://developer.arm.com/docs/ddi0607/latest
This patch distinguishes between enabling CDE for different coprocessor
numbers by defining multiple architecture flags. This means that the
parsing of the architecture extension flags is kept entirely in the
existing code path.
We introduce a new IT block state to indicate the behaviour of these
instructions. This new state allows being used in an IT block or
outside an IT block, but does not allow the instruction to be used
inside a VPT block.
We need this since the CX*A instruction versions can be used in IT
blocks, but they aren't to have the conditional suffixes on them. Hence
we need to mark an instruction as allowed in either position.
We also need a new flag to objdump, in order to determine whether to
disassemble an instruction as CDE related or not.
Successfully regression tested on arm-none-eabi, and arm-wince-pe.
gas/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* config/tc-arm.c (arm_ext_cde*): New feature sets for each
CDE coprocessor that can be enabled.
(enum pred_instruction_type): New pred type.
(BAD_NO_VPT): New error message.
(BAD_CDE): New error message.
(BAD_CDE_COPROC): New error message.
(enum operand_parse_code): Add new immediate operands.
(parse_operands): Account for new immediate operands.
(check_cde_operand): New.
(cde_coproc_enabled): New.
(cde_coproc_pos): New.
(cde_handle_coproc): New.
(cxn_handle_predication): New.
(do_custom_instruction_1): New.
(do_custom_instruction_2): New.
(do_custom_instruction_3): New.
(do_cx1): New.
(do_cx1a): New.
(do_cx1d): New.
(do_cx1da): New.
(do_cx2): New.
(do_cx2a): New.
(do_cx2d): New.
(do_cx2da): New.
(do_cx3): New.
(do_cx3a): New.
(do_cx3d): New.
(do_cx3da): New.
(handle_pred_state): Define new IT block behaviour.
(insns): Add newn CX*{,d}{,a} instructions.
(CDE_EXTENSIONS,armv8m_main_ext_table,armv8_1m_main_ext_table):
Define new cdecp extension strings.
* doc/c-arm.texi: Document new cdecp extension arguments.
* testsuite/gas/arm/cde-scalar.d: New test.
* testsuite/gas/arm/cde-scalar.s: New test.
* testsuite/gas/arm/cde-warnings.d: New test.
* testsuite/gas/arm/cde-warnings.l: New test.
* testsuite/gas/arm/cde-warnings.s: New test.
* testsuite/gas/arm/cde.d: New test.
* testsuite/gas/arm/cde.s: New test.
include/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* opcode/arm.h (ARM_EXT2_CDE): New extension macro.
(ARM_EXT2_CDE0): New extension macro.
(ARM_EXT2_CDE1): New extension macro.
(ARM_EXT2_CDE2): New extension macro.
(ARM_EXT2_CDE3): New extension macro.
(ARM_EXT2_CDE4): New extension macro.
(ARM_EXT2_CDE5): New extension macro.
(ARM_EXT2_CDE6): New extension macro.
(ARM_EXT2_CDE7): New extension macro.
opcodes/ChangeLog:
2020-02-10 Stam Markianos-Wright <stam.markianos-wright@arm.com>
Matthew Malcomson <matthew.malcomson@arm.com>
* arm-dis.c (struct cdeopcode32): New.
(CDE_OPCODE): New macro.
(cde_opcodes): New disassembly table.
(regnames): New option to table.
(cde_coprocs): New global variable.
(print_insn_cde): New
(print_insn_thumb32): Use print_insn_cde.
(parse_arm_disassembler_options): Parse coprocN args.
Commit d835a58baa disabled sysenter/sysenter in 64-bit mode by
default. By default, assembler should accept common, Intel64 only
and AMD64 ISAs since there are no conflicts.
gas/
PR gas/25516
* config/tc-i386.c (intel64): Renamed to ...
(isa64): This.
(match_template): Accept Intel64 only instruction by default.
(i386_displacement): Updated.
(md_parse_option): Updated.
* c-i386.texi: Update -mamd64/-mintel64 documentation.
* testsuite/gas/i386/i386.exp: Run x86-64-sysenter. Pass
-mamd64 to x86-64-sysenter-amd.
* testsuite/gas/i386/x86-64-sysenter.d: New file.
opcodes/
PR gas/25516
* i386-gen.c (opcode_modifiers): Replace AMD64 and Intel64
with ISA64.
* i386-opc.h (AMD64): Removed.
(Intel64): Likewose.
(AMD64): New.
(INTEL64): Likewise.
(INTEL64ONLY): Likewise.
(i386_opcode_modifier): Replace amd64 and intel64 with isa64.
* i386-opc.tbl (Amd64): New.
(Intel64): Likewise.
(Intel64Only): Likewise.
Replace AMD64 with Amd64. Update sysenter/sysenter with
Cpu64 and Intel64Only. Remove AMD64 from sysenter/sysenter.
* i386-tbl.h: Regenerated.
Start server before setting environment variable.
Specify tmpdir as the location of the server's
database.
Check additional server metrics at start-up.
When passed in CXXFLAGS, -Wstrict-null-sentinel triggers twice in a
gdb/gdbserver build.
Fix the two occurrences.
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2020-02-10 Tom de Vries <tdevries@suse.de>
* dwarf2/read.c (process_psymtab_comp_unit_reader): Cast concat NULL
sentinel to char *.
gdbsupport/ChangeLog:
2020-02-10 Tom de Vries <tdevries@suse.de>
* environ.c (gdb_environ::set): Cast concat NULL sentinel to char *.
Pre-commit 919adfe840 "Move gdbserver to top level", if we build gdb with
--disable-gdbserver, and run test-case gdb.multi/multi-target.exp, we run
into:
...
(gdb) PASS: gdb.multi/multi-target.exp: continue: non-stop=off: set remote-exec file in inferior 2
spawn of --once --multi localhost:2346 failed
ERROR: tcl error sourcing /data/gdb_versions/devel/src/gdb/testsuite/gdb.multi/multi-target.exp.
ERROR: Timeout waiting for gdbserver response.
...
Fix this by using skip_gdbserver_tests in multi-target.exp.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-02-10 Tom de Vries <tdevries@suse.de>
* gdb.multi/multi-target.exp: Skip if skip_gdbserver_tests.
Fix a catastrophic failure in gdb.base/step-over-no-symbols.exp where
remote target communication issues cause the value of the PC retrieved
to be empty:
(gdb) FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: stepi
p /x $pc
Remote 'g' packet reply is too long (expected 264 bytes, got 532 bytes): 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
(gdb) FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: get after PC
ERROR: tcl error sourcing .../gdb/testsuite/gdb.base/step-over-no-symbols.exp.
ERROR: missing operand at _@_
in expression " _@_!= "
(parsing expression " != ")
invoked from within
"expr $before_addr != $after_addr"
("uplevel" body line 1)
invoked from within
"uplevel 1 expr $condition"
(procedure "gdb_assert" line 6)
invoked from within
"gdb_assert {$before_addr != $after_addr} "advanced""
(procedure "test_step_over" line 36)
invoked from within
"test_step_over $displaced"
("uplevel" body line 2)
invoked from within
"uplevel 1 $body"
invoked from within
"with_test_prefix "displaced=$displaced" {
test_step_over $displaced
}"
("foreach" body line 6)
invoked from within
"foreach displaced { "off" "on" "auto" } {
if { $displaced != "off" && ![support_displaced_stepping] } {
continue
}
with_test_prefix "dis..."
(file ".../gdb/testsuite/gdb.base/step-over-no-symbols.exp" line 84)
invoked from within
"source .../gdb/testsuite/gdb.base/step-over-no-symbols.exp"
("uplevel" body line 1)
invoked from within
"uplevel #0 source .../gdb/testsuite/gdb.base/step-over-no-symbols.exp"
invoked from within
"catch "uplevel #0 source $test_file_name""
Remote debugging from host xxx.xxx.xxx.xxx, port 47130
monitor exit
Killing process(es): 1092
Remote communication error. Target disconnected.: Connection reset by peer.
(gdb)
To do so verify first, before making an arithmetic comparison, that the
values to compare are actually integers (using a string comparison would
result in a false PASS if both operands were empty, as in this case),
making the test script proceed normally:
(gdb) FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: stepi
p /x $pc
Remote 'g' packet reply is too long (expected 264 bytes, got 532 bytes): 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
(gdb) FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: get after PC
FAIL: gdb.base/step-over-no-symbols.exp: displaced=off: advanced
Remote debugging from host xxx.xxx.xxx.xxx, port 48404
monitor exit
Killing process(es): 1795
Remote communication error. Target disconnected.: Connection reset by peer.
(gdb)
Note the double curly braces, to take advantage of `&&' operator's lazy
evaluation.
gdb/testsuite/
* gdb.base/step-over-no-symbols.exp: Verify that $before_addr
and $after_addr are both integers before making a comparison.
* config/obj-elf.c (obj_elf_change_section): Error for section
type, attr or entsize changes in assembly.
* testsuite/gas/elf/elf.exp: Pass -Z to gas for section5 test.
* testsuite/gas/elf/section5.l: Update.
-Z is supposed to "generate object file even after errors". It
doesn't do so at the moment, unless you count a zero length object
file as useful output. Fixed for most targets as follows.
I suspect avr and pru need target patches.
* output-file.c (output_file_close): Do a normal close when
flag_always_generate_output.
* write.c (write_object_file): Don't stop output when
flag_always_generate_output.
bfd-in2.h didn't match what was in archures.c and reloc.c. This
fixes overlong comment lines and regenerates bfd-in2.h.
* archures.c: Wrap overlong z80 comments.
* bfd-in2.h: Regenerate.
Say we're debugging a test-case with CUs with name "<artificial>", meaning
not originating from a single file compilation, and use the verbose setting:
...
$ gdb -iex "set verbose on" -batch cc1
Reading symbols from cc1...
Reading in symbols for <artificial>... \
and /tmp/trunk/gcc/attribs.c... \
...
and /tmp/trunk/gcc/tree-ssa-reassoc.c... \
done.
...
From the "/tmp/trunk/gcc/attribs.c" message, it's clear which CU is loaded. But
that's not the case for the "<artificial>" message.
The message uses the filename field of struct partial_symtab, which is
documented like this:
...
/* Name of the source file which this partial_symtab defines,
or if the psymtab is anonymous then a descriptive name for
debugging purposes, or "". It must not be NULL. */
...
So, fix this by setting the filename field to a more descriptive name than
"<artificial>", by appending the CU offset.
This way, we print instead:
...
$ gdb -iex "set verbose on" -batch cc1
Reading symbols from cc1...
Reading in symbols for <artificial>@0x41146d9 \
and /tmp/trunk/gcc/attribs.c... \
... \
and /tmp/trunk/gcc/tree-ssa-reassoc.c... \
done.
...
Build and reg-tested on x86_64-linux.
gdb/ChangeLog:
2020-02-09 Tom de Vries <tdevries@suse.de>
* dwarf2read.c (process_psymtab_comp_unit_reader): Append CU offset to
filename if it matches "<artificial>".
When running test-case gdb.base/many-headers.exp, we have test output on
stdout/stderr:
...
Running src/gdb/testsuite/gdb.base/many-headers.exp ...
[New LWP 759]
Core was generated by `outputs/gdb.base/many-headers/many'.
Program terminated with signal SIGSEGV, Segmentation fault.
\#0 0x0000000000400688 in ?? ()
=== gdb Summary ===
nr of expected passes 1
...
Furthermore, the only trace in gdb.log that we have of the gdb command issued
is:
...
PASS: gdb.base/many-headers.exp: read core file
...
Fix this by echoing the gdb command in gdb.log, and capturing the
command output and pasting it into gdb.log:
...
( ulimit -s 4096; \
gdb -nw -nx -data-directory data-directory -batch -core=many-headers.core )
[New LWP 1542]
Core was generated by `many'.
Program terminated with signal SIGSEGV, Segmentation fault.
\#0 0x0000000000400688 in ?? ()
PASS: gdb.base/many-headers.exp: read core file
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2020-02-09 Tom de Vries <tdevries@suse.de>
* gdb.base/many-headers.exp: Echo gdb command to gdb.log. Capture gdb
command output and paste it into gdb.log. If any, paste catch message
to gdb.log.
Jan Beulich
Maciej W. Rozycki
Tom de Vries
Tom Tromey
GDB Administrator
H.J. Lu
Christian Biesinger
Sergio Durigan Junior
Simon Marchi
Tom Tromey
Nick Clifton
Matthew Malcomson
Alan Modra
Jozef Lawrynowicz
Fangrui Song
Aaron Merey
Hannes Domani