* linux-low.c (disabled_regsets, num_regsets): New.
(use_regsets_p): Delete.
(linux_wait_for_process): Clear disabled_regsets.
(regsets_fetch_inferior_registers): Check and set it.
(regsets_store_inferior_registers): Likewise.
(linux_fetch_registers, linux_store_registers): Do not use
use_regsets_p.
(initialize_low): Allocate disabled_regsets.
reg-s390.o and reg-s390x.o.
* linux-low.c (new_inferior): New global variable.
(linux_create_inferior, linux_attach): Set it.
(linux_wait_for_process): Call the_low_target.arch_setup after the
target has stopped for the first time.
(initialize_low): Do not call the_low_target.arch_setup.
* linux-s390-low.c (s390_get_pc): Support bi-arch operation.
(s390_set_pc): Likewise.
(s390_arch_setup): New function.
(the_low_target): Use s390_arch_setup as arch_setup routine.
* regcache.c (realloc_register_cache): New function.
(set_register_cache): Call it for each existing regcache.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
reinsert auto-delete breakpoints.
* mem-break.c (struct breakpoint): Change return type of handler to
int.
(set_breakpoint_at): Update handler type.
(reinsert_breakpoint_handler): Return 1 instead of calling
delete_breakpoint.
(reinsert_breakpoint_by_bp): Check for the original breakpoint before
setting a new one.
(check_breakpoints): Delete auto-delete breakpoints and return 2.
* mem-break.h (set_breakpoint_at): Update handler type.
* thread-db.c (thread_db_create_event, thread_db_create_event): Update.
* win32-low.c (auto_delete_breakpoint): New.
(get_child_debug_event): Use it.
(add_pid_to_list, pull_pid_from_list): New.
* linux-low.c (PTRACE_SETOPTIONS, PTRACE_GETEVENTMSG)
(PTRACE_O_TRACESYSGOOD, PTRACE_O_TRACEFORK, PTRACE_O_TRACEVFORK)
(PTRACE_O_TRACECLONE, PTRACE_O_TRACEEXEC, PTRACE_O_TRACEVFORKDONE)
(PTRACE_O_TRACEEXIT, PTRACE_EVENT_FORK, PTRACE_EVENT_VFORK)
(PTRACE_EVENT_CLONE, PTRACE_EVENT_EXEC, PTRACE_EVENT_VFORK_DONE)
(PTRACE_EVENT_EXIT, __WALL): Provide default definitions.
(stopped_pids, thread_db_active, must_set_ptrace_flags): New variables.
(using_threads): Always set to 1.
(handle_extended_wait): New.
(add_process): Do not set TID.
(linux_create_inferior): Set must_set_ptrace_flags.
(linux_attach_lwp): Remove TID argument. Do not check using_threads.
Use PTRACE_SETOPTIONS. Call new_thread_notify. Update all callers.
(linux_thread_alive): Rename TID argument to LWPID.
(linux_wait_for_process): Handle unknown processes. Do not use TID.
(linux_wait_for_event): Do not use TID or check using_threads. Update
call to dead_thread_notify. Call handle_extended_wait.
(linux_create_inferior): Use PTRACE_SETOPTIONS.
(send_sigstop): Delete sigstop_sent.
(wait_for_sigstop): Avoid TID.
(linux_supports_tracefork_flag, linux_tracefork_child, my_waitpid)
(linux_test_for_tracefork): New.
(linux_lookup_signals): Use thread_db_active and
linux_supports_tracefork_flag.
(initialize_low): Use thread_db_active and linux_test_for_tracefork.
* linux-low.h (get_process_thread): Avoid TID.
(struct process_ifo): Move thread_known and tid to the end. Remove
sigstop_sent.
(linux_attach_lwp, thread_db_init): Update prototypes.
* server.h (change_inferior_id): Delete prototype.
(add_pid_to_list, pull_pid_from_list): New prototypes.
* thread-db.c (thread_db_use_events): New.
(find_first_thread): Rename to...
(find_one_thread): ...this. Update callers and messages. Do not
call fatal. Check thread_db_use_events. Do not call
change_inferior_id or new_thread_notify.
(maybe_attach_thread): Update. Do not call new_thread_notify.
(thread_db_init): Set thread_db_use_events. Check use_events.
* utils.c (fatal, warning): Correct message prefix.
(linux_resume_one_process): Take a siginfo_t *. Update all
callers. Queue it if necessary. Use PTRACE_SETSIGINFO.
(struct pending_signals): Add a siginfo_t.
(linux_wait_for_process): Always set last_status.
(linux_wait_for_event): Use PTRACE_GETSIGINFO.
(linux_queue_one_thread): Use PTRACE_GETSIGINFO.
* linux-low.h (struct process_info): Add last_status.
* configure.tgt: Build gdbserver for Cygwin and mingw32.
gdb/gdbserver/
* configure.ac: Check for more headers which are missing on
Windows. Automatically supply -lwsock32 and USE_WIN32API.
* configure.srv: Add Cygwin and mingw32.
* remote-utils.c: Don't include headers unconditionally which
are missing on mingw32. Include <winsock.h> for mingw32.
(remote_open): Adjust for mingw32 support. Flush
standard error after writing to it.
(remote_close, putpkt_binary, input_interrupt, block_async_io)
(unblock_async_io, enable_async_io, disable_async_io)
(readchar, getpkt): Update for Winsock support.
(prepare_resume_reply): Expect a protocol signal number.
* server.c: Disable <sys/wait.h> on mingw32.
(start_inferior): Adjust for mingw32 support. Flush
standard error after writing to it.
(attach_inferior): Likewise. Use protocol signal
numbers.
(main): Skip 'D' packet on mingw32. Use protocol signal numbers
and names.
* win32-i386-low.c: New file.
* Makefile.in (XM_CLIBS): Set.
(gdbserver, gdbreplay): Use $(INTERNAL_CFLAGS).
(win32-i386-low.o): New dependency rule.
* linux-low.c (linux_wait): Use target signal numbers.
* target.h (struct target_ops): Doc fix.
* server.h (target_signal_to_name): New prototype.
* gdbreplay.c: Don't include headers unconditionally which
are missing on mingw32. Include <winsock.h> for mingw32.
(remote_close, remote_open): Adjust for Winsock support.
* configure, config.in: Regenerated.
is not available. Define HAVE_PTRACE_GETREGS if it is.
* config.in, configure: Regenerated.
* configure.srv: Set srv_linux_regsets for PowerPC and PowerPC64.
* linux-i386-low.c, linux-m68k-low.c: Update to use
HAVE_PTRACE_GETREGS.
* linux-low.c (regsets_fetch_inferior_registers)
(regsets_store_inferior_registers): Only return 0 if we processed
GENERAL_REGS.
* linux-ppc-low.c (ppc_fill_gregset, target_regsets): New.
* linux-ppc64-low.c (ppc_fill_gregset, target_regsets): New.