While debugging something, i noticed this odd FIXME comment. It seems stale
and therefore here's a patch removing it.
gdb/ChangeLog:
2019-12-02 Luis Machado <luis.machado@linaro.org>
* infrun.c (follow_fork_inferior): Remove outdated FIXME comment.
Change-Id: I2436ca4ae4a6741012cafe8123325f738b692c9c
This changes various spots in gdb to use the new %p format suffixes.
gdb/ChangeLog
2019-10-01 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* symtab.c (print_symbol_info): Use %ps.
(print_msymbol_info): Use %ps.
* symfile.c (symbol_file_add_with_addrs): Use %ps.
* printcmd.c (print_variable_and_value): Use %ps.
* macrocmd.c (show_pp_source_pos): Use %ps.
* infrun.c (print_exited_reason): Use ui_out::message.
* breakpoint.c (watchpoint_check, print_one_breakpoint_location)
(describe_other_breakpoints): Use ui_out::message and new
formats.
(say_where): Use new formats.
(bkpt_print_it, tracepoint_print_one_detail): Use ui_out::message
and new formats.
I recently noticed the following behavior while debugging
dw2-ranges-func-low-cold. This is one of the test programs associated
with the test gdb.dwarf2/dw2-ranges-func.exp.
(gdb) b 70
Breakpoint 1 at 0x401129: file dw2-ranges-func-lo-cold.c, line 70.
(gdb) run
Starting program: dw2-ranges-func-lo-cold
Breakpoint 1, foo ()
at dw2-ranges-func-lo-cold.c:70
70 if (e) foo_cold (); /* foo foo_cold call */
(gdb) set var e=1
(gdb) step
[Inferior 1 (process 12545) exited normally]
This is incorrect. When stepping, we expect a step to occur. We do not
expect the program to exit. Instead, we should see the following behavior:
...
(gdb) set var e=1
(gdb) step
foo ()
at dw2-ranges-func-lo-cold.c:54
54 baz (); /* foo_cold baz call */
(Note that I've shortened the paths in the above sessions to improve
readability.)
The bug is in fill_in_stop_func() in infrun.c. While working on
non-contiguous address range improvements in 2018, I replaced the
call to find_pc_partial_function() with a call to
find_function_entry_range_from_pc(). Although this seemed like the
right thing to do at the time, I now think that calling
find_pc_partial_function (along with some other tweaks) is the right
thing to do.
For blocks with a single contiguous range, these functions do pretty
much the same thing: when the function succeeds, the function name,
start address, and end address are all filled in. Additionally,
find_pc_partial_function contains an additional output parameter
which is set to the block containing that PC.
For blocks with non-contiguous ranges, find_pc_partial_function
sets the start and end addresses to the start and end addresses
of the range containing the pc. find_function_entry_range_from_pc
does what it says; it sets the start and end addresses to those
of the range containing the entry pc.
The reason that I had thought that using the entry pc range was
correct is due to the fact that fill_in_stop_func() contains some
code for advancing past the function start and entry point. To do
this, we'd need the range that contains the entry pc.
However, when stepping, we actually want the range that contains the
stop pc. If that range also contains the entry pc, we should then
attempt to advance stop_func_start past the start offset and entry
point. (I haven't thought very hard about the reason for advancing
the stop_func_start in this manner. Since it's been there for quite
a while, I'm assuming that it's still a good idea.)
Back when I wrote the test case, I had included a test for doing the
step shown in the example above. I had problems with it, however. At
the time, I thought it was due to differing compiler versions, so I
disabled that portion of the test. I have now reenabled those tests,
but have left in place the logic which may be used to disable it.
The changes to dw2-ranges-func.exp depend on my other recent changes
to the file which have not been pushed yet.
Finally, I'll note that the only caller of
find_function_entry_range_from_pc() is/was fill_in_stop_func(). Once
this commit goes in, it'll be dead code. I considered removing it,
but I think that it ought to be used (instead of
find_pc_partial_function) for determining the correct range to scan
for prologue analysis, so I'm going to leave it in place for now.
gdb/ChangeLog:
* infrun.c (fill_in_stop_func): Use find_pc_partial_function
instead of find_function_entry_range_from_pc.
testsuite/ChangeLog:
* gdb.dwarf2/dw2-ranges-func.exp (enable_foo_cold_stepping):
Enable tests associated with this flag. Adjust regex
referencing "foo_low" to now refer to "foo_cold" instead.
This replaces uses of field_fmt with a "%s" format string to use
field_string instead. Also, one use of "%9lx" is replaced with a call
to phex_nz; the '9' is dropped as it is implicit in the field width.
2019-07-15 Tom Tromey <tromey@adacore.com>
* mi/mi-main.c (list_available_thread_groups): Use field_string.
* mi/mi-interp.c (mi_memory_changed): Use field_string.
* target.c (flash_erase_command): Use field_string.
* infrun.c (print_signal_received_reason): Use field_string.
* i386-tdep.c (i386_mpx_print_bounds): Use field_string.
* breakpoint.c (maybe_print_thread_hit_breakpoint): Use
field_string.
* ada-tasks.c (print_ada_task_info): Use field_string.
I noticed that target_ops::follow_exec took a "char *" parameter,
where "const char *" would be more correct. This patch changes this
(and related functions) to be constified.
Tested by rebuilding.
gdb/ChangeLog
2019-05-22 Tom Tromey <tromey@adacore.com>
* target.c (target_follow_exec): Constify parameter.
* target-delegates.c: Rebuild.
* remote.c (remote_target::follow_exec): Constify parameter.
* infrun.c (follow_exec): Constify parameter.
* target.h (struct target_ops) <follow_exec>: Constify parameter.
(target_follow_exec): Likewise.
When debugging any of the testcases added by this commit, which do a
vfork in a thread with "set follow-fork-mode child" + "set
detach-on-fork on", we run into this assertion:
...
src/gdb/nat/x86-linux-dregs.c:146: internal-error: \
void x86_linux_update_debug_registers(lwp_info*): \
Assertion `lwp_is_stopped (lwp)' failed.
...
The assert is caused by the following: the vfork-child exit or exec
event is handled by handle_vfork_child_exec_or_exit, which calls
target_detach to detach from the vfork parent. During target_detach
we call linux_nat_target::detach, which:
#1 - stops all the threads
#2 - waits for all the threads to be stopped
#3 - detaches all the threads
However, during the second step we run into this code in
stop_wait_callback:
...
/* If this is a vfork parent, bail out, it is not going to report
any SIGSTOP until the vfork is done with. */
if (inf->vfork_child != NULL)
return 0;
...
and we don't wait for the threads to be stopped, which results in this
assert in x86_linux_update_debug_registers triggering during the third
step:
...
gdb_assert (lwp_is_stopped (lwp));
...
The fix is to reset the vfork parent's vfork_child field before
calling target_detach in handle_vfork_child_exec_or_exit. There's
already similar code for the other paths handled by
handle_vfork_child_exec_or_exit, so this commit refactors the code a
bit so that all paths share the same code.
The new tests cover both a vfork child exiting, and a vfork child
execing, since both cases would trigger the assertion.
The new testcases also exercise following the vfork children with "set
detach-on-fork off", since it doesn't seem to be tested anywhere.
Tested on x86_64-linux, using native and native-gdbserver.
gdb/ChangeLog:
2019-04-18 Tom de Vries <tdevries@suse.de>
Pedro Alves <palves@redhat.com>
PR gdb/24454
* infrun.c (handle_vfork_child_exec_or_exit): Reset vfork parent's
vfork_child field before calling target_detach.
gdb/testsuite/ChangeLog:
2019-04-18 Tom de Vries <tdevries@suse.de>
Pedro Alves <palves@redhat.com>
PR gdb/24454
* gdb.threads/vfork-follow-child-exec.c: New file.
* gdb.threads/vfork-follow-child-exec.exp: New file.
* gdb.threads/vfork-follow-child-exit.c: New file.
* gdb.threads/vfork-follow-child-exit.exp: New file.
This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was
largely written by script, though one change (to a comment in
common-exceptions.h) was reverted by hand.
gdb/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* xml-support.c: Use C++ exception handling.
* x86-linux-nat.c: Use C++ exception handling.
* windows-nat.c: Use C++ exception handling.
* varobj.c: Use C++ exception handling.
* value.c: Use C++ exception handling.
* valprint.c: Use C++ exception handling.
* valops.c: Use C++ exception handling.
* unittests/parse-connection-spec-selftests.c: Use C++ exception
handling.
* unittests/cli-utils-selftests.c: Use C++ exception handling.
* typeprint.c: Use C++ exception handling.
* tui/tui.c: Use C++ exception handling.
* tracefile-tfile.c: Use C++ exception handling.
* top.c: Use C++ exception handling.
* thread.c: Use C++ exception handling.
* target.c: Use C++ exception handling.
* symmisc.c: Use C++ exception handling.
* symfile-mem.c: Use C++ exception handling.
* stack.c: Use C++ exception handling.
* sparc64-linux-tdep.c: Use C++ exception handling.
* solib.c: Use C++ exception handling.
* solib-svr4.c: Use C++ exception handling.
* solib-spu.c: Use C++ exception handling.
* solib-frv.c: Use C++ exception handling.
* solib-dsbt.c: Use C++ exception handling.
* selftest-arch.c: Use C++ exception handling.
* s390-tdep.c: Use C++ exception handling.
* rust-lang.c: Use C++ exception handling.
* rust-exp.y: Use C++ exception handling.
* rs6000-tdep.c: Use C++ exception handling.
* rs6000-aix-tdep.c: Use C++ exception handling.
* riscv-tdep.c: Use C++ exception handling.
* remote.c: Use C++ exception handling.
* remote-fileio.c: Use C++ exception handling.
* record-full.c: Use C++ exception handling.
* record-btrace.c: Use C++ exception handling.
* python/python.c: Use C++ exception handling.
* python/py-value.c: Use C++ exception handling.
* python/py-utils.c: Use C++ exception handling.
* python/py-unwind.c: Use C++ exception handling.
* python/py-type.c: Use C++ exception handling.
* python/py-symbol.c: Use C++ exception handling.
* python/py-record.c: Use C++ exception handling.
* python/py-record-btrace.c: Use C++ exception handling.
* python/py-progspace.c: Use C++ exception handling.
* python/py-prettyprint.c: Use C++ exception handling.
* python/py-param.c: Use C++ exception handling.
* python/py-objfile.c: Use C++ exception handling.
* python/py-linetable.c: Use C++ exception handling.
* python/py-lazy-string.c: Use C++ exception handling.
* python/py-infthread.c: Use C++ exception handling.
* python/py-inferior.c: Use C++ exception handling.
* python/py-gdb-readline.c: Use C++ exception handling.
* python/py-framefilter.c: Use C++ exception handling.
* python/py-frame.c: Use C++ exception handling.
* python/py-finishbreakpoint.c: Use C++ exception handling.
* python/py-cmd.c: Use C++ exception handling.
* python/py-breakpoint.c: Use C++ exception handling.
* python/py-arch.c: Use C++ exception handling.
* printcmd.c: Use C++ exception handling.
* ppc-linux-tdep.c: Use C++ exception handling.
* parse.c: Use C++ exception handling.
* p-valprint.c: Use C++ exception handling.
* objc-lang.c: Use C++ exception handling.
* mi/mi-main.c: Use C++ exception handling.
* mi/mi-interp.c: Use C++ exception handling.
* mi/mi-cmd-stack.c: Use C++ exception handling.
* mi/mi-cmd-break.c: Use C++ exception handling.
* main.c: Use C++ exception handling.
* linux-thread-db.c: Use C++ exception handling.
* linux-tdep.c: Use C++ exception handling.
* linux-nat.c: Use C++ exception handling.
* linux-fork.c: Use C++ exception handling.
* linespec.c: Use C++ exception handling.
* language.c: Use C++ exception handling.
* jit.c: Use C++ exception handling.
* infrun.c: Use C++ exception handling.
* infcmd.c: Use C++ exception handling.
* infcall.c: Use C++ exception handling.
* inf-loop.c: Use C++ exception handling.
* i386-tdep.c: Use C++ exception handling.
* i386-linux-tdep.c: Use C++ exception handling.
* guile/scm-value.c: Use C++ exception handling.
* guile/scm-type.c: Use C++ exception handling.
* guile/scm-symtab.c: Use C++ exception handling.
* guile/scm-symbol.c: Use C++ exception handling.
* guile/scm-pretty-print.c: Use C++ exception handling.
* guile/scm-ports.c: Use C++ exception handling.
* guile/scm-param.c: Use C++ exception handling.
* guile/scm-math.c: Use C++ exception handling.
* guile/scm-lazy-string.c: Use C++ exception handling.
* guile/scm-frame.c: Use C++ exception handling.
* guile/scm-disasm.c: Use C++ exception handling.
* guile/scm-cmd.c: Use C++ exception handling.
* guile/scm-breakpoint.c: Use C++ exception handling.
* guile/scm-block.c: Use C++ exception handling.
* guile/guile-internal.h: Use C++ exception handling.
* gnu-v3-abi.c: Use C++ exception handling.
* gdbtypes.c: Use C++ exception handling.
* frame.c: Use C++ exception handling.
* frame-unwind.c: Use C++ exception handling.
* fbsd-tdep.c: Use C++ exception handling.
* f-valprint.c: Use C++ exception handling.
* exec.c: Use C++ exception handling.
* event-top.c: Use C++ exception handling.
* event-loop.c: Use C++ exception handling.
* eval.c: Use C++ exception handling.
* dwarf2read.c: Use C++ exception handling.
* dwarf2loc.c: Use C++ exception handling.
* dwarf2-frame.c: Use C++ exception handling.
* dwarf2-frame-tailcall.c: Use C++ exception handling.
* dwarf-index-write.c: Use C++ exception handling.
* dwarf-index-cache.c: Use C++ exception handling.
* dtrace-probe.c: Use C++ exception handling.
* disasm-selftests.c: Use C++ exception handling.
* darwin-nat.c: Use C++ exception handling.
* cp-valprint.c: Use C++ exception handling.
* cp-support.c: Use C++ exception handling.
* cp-abi.c: Use C++ exception handling.
* corelow.c: Use C++ exception handling.
* completer.c: Use C++ exception handling.
* compile/compile-object-run.c: Use C++ exception handling.
* compile/compile-object-load.c: Use C++ exception handling.
* compile/compile-cplus-symbols.c: Use C++ exception handling.
* compile/compile-c-symbols.c: Use C++ exception handling.
* common/selftest.c: Use C++ exception handling.
* common/new-op.c: Use C++ exception handling.
* cli/cli-script.c: Use C++ exception handling.
* cli/cli-interp.c: Use C++ exception handling.
* cli/cli-cmds.c: Use C++ exception handling.
* c-varobj.c: Use C++ exception handling.
* btrace.c: Use C++ exception handling.
* breakpoint.c: Use C++ exception handling.
* break-catch-throw.c: Use C++ exception handling.
* arch-utils.c: Use C++ exception handling.
* amd64-tdep.c: Use C++ exception handling.
* ada-valprint.c: Use C++ exception handling.
* ada-typeprint.c: Use C++ exception handling.
* ada-lang.c: Use C++ exception handling.
* aarch64-tdep.c: Use C++ exception handling.
gdb/gdbserver/ChangeLog
2019-04-08 Tom Tromey <tom@tromey.com>
* server.c: Use C++ exception handling.
* linux-low.c: Use C++ exception handling.
* gdbreplay.c: Use C++ exception handling.
The test gdb.threads/watchthreads-reorder.exp verifies that the
'set debug infrun 1' debug output does not crash GDB.
Under high load, the test can still cause a GDB internal error (see details
below).
This patch fixes this crash, and improves/factorises some wait kind traces.
Tested on debian/amd64 + run one test with 'set debug infrun 1'.
Changes compared to the first version:
* Handles the suggestions of Kevin to trace the relevant elements
of the wait status (this is done by calling target_waitstatus_to_string).
* Some other changes to factorise wait status tracing.
Note that using target_waitstatus_to_string instead of the 'locally printed'
status kind strings means that debug trace that was using strings such as:
"EXITED" or "TARGET_WAITKIND_EXITED"
will now use what is printed by target_waitstatus_to_string e.g.
"exited".
gdb/ChangeLog
2019-04-01 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* infrun.c (stop_all_threads): If debug_infrun, always
trace the wait status after wait_one, using
target_waitstatus_to_string and target_pid_to_str.
(handle_inferior_event): Replace various trace of
wait status kind by a single trace.
* gdb/gnu-nat.c (gnu_nat_target::wait): Replace local
wait status kind image by target_waitstatus_to_string.
* target/waitstatus.c (target_waitstatus_to_string): Fix
obsolete comment.
(top-gdb) bt
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
#1 0x00007f3d54a0642a in __GI_abort () at abort.c:89
#2 0x0000555c24c60e66 in dump_core () at ../../fixleaks/gdb/utils.c:201
#3 0x0000555c24c63d49 in internal_vproblem(internal_problem *, const char *, int, const char *, typedef __va_list_tag __va_list_tag *) (problem=problem@entry=0x555c25338d40 <internal_error_problem>, file=<optimized out>, line=287,
fmt=<optimized out>, ap=<optimized out>) at ../../fixleaks/gdb/utils.c:411
#4 0x0000555c24c63eab in internal_verror (file=<optimized out>, line=<optimized out>, fmt=<optimized out>,
ap=<optimized out>) at ../../fixleaks/gdb/utils.c:436
#5 0x0000555c249e8c22 in internal_error (file=file@entry=0x555c24e0f2ad "../../fixleaks/gdb/inferior.c",
line=line@entry=287, fmt=<optimized out>) at ../../fixleaks/gdb/common/errors.c:55
#6 0x0000555c247d3f5c in find_inferior_pid (pid=<optimized out>) at ../../fixleaks/gdb/inferior.c:287
#7 0x0000555c24ad2248 in find_inferior_pid (pid=<optimized out>) at ../../fixleaks/gdb/inferior.c:302
#8 find_inferior_ptid (ptid=...) at ../../fixleaks/gdb/inferior.c:301
#9 0x0000555c24c35f25 in find_thread_ptid (ptid=...) at ../../fixleaks/gdb/thread.c:522
#10 0x0000555c24b0ab4d in thread_db_target::pid_to_str[abi:cxx11](ptid_t) (
this=0x555c2532e3e0 <the_thread_db_target>, ptid=...) at ../../fixleaks/gdb/linux-thread-db.c:1637
#11 0x0000555c24c2f420 in target_pid_to_str[abi:cxx11](ptid_t) (ptid=...) at ../../fixleaks/gdb/target.c:2083
#12 0x0000555c24ad9cab in stop_all_threads () at ../../fixleaks/gdb/infrun.c:4373
#13 0x0000555c24ada00f in stop_waiting (ecs=<optimized out>) at ../../fixleaks/gdb/infrun.c:7464
#14 0x0000555c24adc401 in process_event_stop_test (ecs=ecs@entry=0x7ffc9402d9d0) at ../../fixleaks/gdb/infrun.c:6181
...
(top-gdb) fr 12
#12 0x0000555c24ad9cab in stop_all_threads () at ../../fixleaks/gdb/infrun.c:4373
(top-gdb) p event_ptid
$5 = {m_pid = 25419, m_lwp = 25427, m_tid = 0}
(top-gdb) p ptid
$6 = {m_pid = 0, m_lwp = 0, m_tid = 0}
(top-gdb) p ws
$7 = {kind = TARGET_WAITKIND_THREAD_EXITED, value = {integer = 0, sig = GDB_SIGNAL_0, related_pid = {m_pid = 0,
m_lwp = 0, m_tid = 0}, execd_pathname = 0x0, syscall_number = 0}}
(top-gdb)
The gdb.log corresponding to the above crash is:
(gdb) PASS: gdb.threads/watchthreads-reorder.exp: reorder1: set debug infrun 1
continue
Continuing.
infrun: clear_proceed_status_thread (Thread 0x7ffff7fcfb40 (LWP 25419))
infrun: clear_proceed_status_thread (Thread 0x7ffff7310700 (LWP 25427))
infrun: clear_proceed_status_thread (Thread 0x7ffff6b0f700 (LWP 25428))
infrun: proceed (addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: proceed: resuming Thread 0x7ffff7fcfb40 (LWP 25419)
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [Thread 0x7ffff7fcfb40 (LWP 25419)] at 0x7ffff7344317
infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: proceed: resuming Thread 0x7ffff7310700 (LWP 25427)
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [Thread 0x7ffff7310700 (LWP 25427)] at 0x5555555553d7
infrun: prepare_to_wait
infrun: proceed: resuming Thread 0x7ffff6b0f700 (LWP 25428)
infrun: resume (step=0, signal=GDB_SIGNAL_0), trap_expected=0, current thread [Thread 0x7ffff6b0f700 (LWP 25428)] at 0x5555555554c8
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: -1.0.0 [process -1],
infrun: status->kind = ignore
infrun: TARGET_WAITKIND_IGNORE
infrun: prepare_to_wait
Joining the threads.
[Thread 0x7ffff6b0f700 (LWP 25428) exited]
infrun: target_wait (-1.0.0, status) =
infrun: -1.0.0 [process -1],
infrun: status->kind = ignore
infrun: TARGET_WAITKIND_IGNORE
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: 25419.25419.0 [Thread 0x7ffff7fcfb40 (LWP 25419)],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x555555555e50
infrun: context switch
infrun: Switching context from Thread 0x7ffff6b0f700 (LWP 25428) to Thread 0x7ffff7fcfb40 (LWP 25419)
infrun: BPSTAT_WHAT_STOP_NOISY
infrun: stop_waiting
infrun: stop_all_threads
infrun: stop_all_threads, pass=0, iterations=0
infrun: Thread 0x7ffff7fcfb40 (LWP 25419) not executing
infrun: Thread 0x7ffff7310700 (LWP 25427) executing, need stop
[Thread 0x7ffff7310700 (LWP 25427) exited]
infrun: target_wait (-1.0.0, status) =
infrun: 25419.25427.0 [LWP 25427],
infrun: status->kind = thread exited, status = 0
infrun: infrun_async(0)
../../fixleaks/gdb/inferior.c:287: internal-error: inferior* find_inferior_pid(int): Assertion `pid != 0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/watchthreads-reorder.exp: reorder1: continue to breakpoint: break-at-exit (GDB internal error)
Resyncing due to internal error.
n
infrun: infrun_async(1)
This is a bug, please report it. For instructions, see:
<http://www.gnu.org/software/gdb/bugs/>.
infrun: infrun_async(0)
../../fixleaks/gdb/inferior.c:287: internal-error: inferior* find_inferior_pid(int): Assertion `pid != 0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Create a core file of GDB? (y or n) y
When running under valgrind, multi-arch-exec.exp blocks forever.
Some (painful) investigation shows this is due to valgrind slowing
down GDB, and GDB has to output some messages at a different time,
when GDB does not have the terminal for output.
To reproduce the problem, you need to slow down GDB.
It can be reproduced by:
cd gdb/testsuite/outputs/gdb.multi/multi-arch-exec/
../../../../gdb -ex 'set debug lin-lwp 1' -ex 'break all_started' -ex 'run' ./2-multi-arch-exec
The above stops at a breakpoint. Do continue.
GDB is then suspended because of SIGTTOU.
The stacktrace that leads to the hanging GDB is:
(top-gdb) bt
at ../../binutils-gdb/gdb/exceptions.c:130
....
Alternatively, the same happens when doing
strace -o s.out ../../../../gdb -ex 'break all_started' -ex 'run' ./2-multi-arch-exec
And of course, valgrind is also sufficiently slowing down GDB to
reproduce this :).
Fix this by calling target_terminal::ours_for_output ();
at the beginning of follow_exec.
Note that all this terminal handling is not very clear to me:
* Some code takes the terminal, and then takes care to give it back to the inferior
if the terminal was belonging to the inferior.
(e.g. annotate_breakpoints_invalid).
* some code takes the terminal, but does not give it back
(e.g. update_inserted_breakpoint_locations).
* some code takes it, and unconditionally gives it back
(e.g. handle_jit_event)
* here and there, we also find
gdb::optional<target_terminal::scoped_restore_terminal_state> term_state;
before a (sometimes optional) call to ours_for_output.
And such calls to ours_for_output is sometimes protected by:
if (target_supports_terminal_ours ())
(e.g. exceptions.c: print_flush).
but most of the code calls it without checking if the target supports it.
* some code is outputting some errors, but only takes the terminal
after. E.g. infcmd.c: prepare_one_step
gdb/ChangeLog
2019-03-28 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* infrun.c (follow_exec): Call target_terminal::ours_for_output.
I noticed that handle_inferior_event is just a small wrapper that
frees the value chain. This patch replaces it with a
scoped_value_mark, reducing the number of lines of code here.
Regression tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-03-20 Tom Tromey <tromey@adacore.com>
* infrun.c (handle_inferior_event): Rename from
handle_inferior_event_1. Create a scoped_value_mark.
(handle_inferior_event): Remove.
If you run "gdb -i=mi2" and set a "display", then when "next"ing the
displays will be shown twice:
~"1: x = 23\n"
~"7\t printf(\"%d\\n\", x);\n"
~"1: x = 23\n"
*stopped,reason="end-stepping-range",frame={addr="0x0000000000400565",func="main",args=[],file="q.c",fullname="/tmp/q.c",line="7"},thread-id="1",stopped-threads="all",core="1"
The immediate cause of this is this code in mi_on_normal_stop_1:
print_stop_event (mi_uiout);
console_interp = interp_lookup (current_ui, INTERP_CONSOLE);
if (should_print_stop_to_console (console_interp, tp))
print_stop_event (mi->cli_uiout);
... which obviously prints the stop twice.
However, I think the first call to print_stop_event is intended just
to emit the MI *stopped notification, which explains why the source
line does not show up two times.
This patch fixes the bug by changing print_stop_event to only call
do_displays for non-MI-like ui-outs.
Tested on x86-64 Fedora 29.
gdb/ChangeLog
2019-03-19 Tom Tromey <tromey@adacore.com>
* mi/mi-interp.c (mi_on_normal_stop_1): Only show displays once.
* infrun.h (print_stop_event): Add "displays" parameter.
* infrun.c (print_stop_event): Add "displays" parameter.
gdb/testsuite/ChangeLog
2019-03-19 Tom Tromey <tromey@adacore.com>
* gdb.mi/mi2-cli-display.c: New file.
* gdb.mi/mi2-cli-display.exp: New file.
TARGET_WAITKIND_NO_RESUMED doesn't have an associated event thread, so
we shouldn't be referring to inferior_thread() assuming it points to
one.
This was caught on the multi-target branch, where we always switch to
no-thread-selected whenever we start handling an event, exactly to
catch places that incorrectly use "inferior_ptid/inferior_thread()"
without switching to the right event thread / target.
Here, on the branch, we assert in inferior_thread() because
TARGET_WAITKIND_NO_RESUMED doesn't have an associated event thread, so
inferior_ptid is still null_ptid.
gdb/ChangeLog:
2019-03-07 Pedro Alves <palves@redhat.com>
* infrun.c (normal_stop): Also check for
TARGET_WAITKIND_NO_RESUMED before referring to inferior_thread().
This changes displaced_step_clear_cleanup to be a forward_scope_exit
and updates the callers.
gdb/ChangeLog
2019-03-06 Tom Tromey <tom@tromey.com>
* infrun.c (displaced_step_clear_cleanup): Now a
forward_scope_exit type.
(displaced_step_prepare_throw): Update.
(displaced_step_fixup): Update.
A customer noticed some mildly odd MI output, where CLI output was
split into multiple MI strings at unusual boundaries, like this:
~"$1 = (b => true"
~", p => 0x407260"
This is technically correct according to the MI spec, but still
unusual, in that there's no particular reason for the string to be
split where it is.
I tracked this down to a call to gdb_flush in generic_val_print.
Then, I went through all calls to gdb_flush and removed the ones I
thought were superfluous. In particular:
* Any call in the value-printing code;
* Likewise the type-printing code (just a single call); and
* Any call that immediately followed a printf that obviously
ended with a newline, my belief being that gdb's standard output
streams are line buffered (by inheriting the behavior from stdio)
Regression tested on x86-64 Fedora 29.
I didn't add a new test case. I tend to think we don't necessarily
want to specify this behavior in the tests. Let me know what you
think of this.
gdb/ChangeLog
2019-03-05 Tom Tromey <tromey@adacore.com>
* windows-nat.c (windows_nat_target::attach)
(windows_nat_target::detach): Don't call gdb_flush.
* valprint.c (generic_val_print, val_print, val_print_string):
Don't call gdb_flush.
* utils.c (defaulted_query): Don't call gdb_flush.
* typeprint.c (print_type_scalar): Don't call gdb_flush.
* target.c (target_announce_detach): Don't call gdb_flush.
* sparc64-tdep.c (adi_print_versions): Don't call gdb_flush.
* remote.c (extended_remote_target::attach): Don't call
gdb_flush.
* procfs.c (procfs_target::detach): Don't call gdb_flush.
* printcmd.c (do_examine): Don't call gdb_flush.
(info_display_command): Don't call gdb_flush.
* p-valprint.c (pascal_val_print): Don't call gdb_flush.
* nto-procfs.c (nto_procfs_target::attach): Don't call gdb_flush.
* memattr.c (info_mem_command): Don't call gdb_flush.
* mdebugread.c (mdebug_build_psymtabs): Don't call gdb_flush.
* m2-valprint.c (m2_val_print): Don't call gdb_flush.
* infrun.c (follow_exec, handle_command): Don't call gdb_flush.
* inf-ptrace.c (inf_ptrace_target::attach): Don't call gdb_flush.
* hppa-tdep.c (unwind_command): Don't call gdb_flush.
* gnu-nat.c (gnu_nat_target::attach): Don't call gdb_flush.
(gnu_nat_target::detach): Don't call gdb_flush.
* f-valprint.c (f_val_print): Don't call gdb_flush.
* darwin-nat.c (darwin_nat_target::attach): Don't call gdb_flush.
* cli/cli-script.c (read_command_lines): Don't call gdb_flush.
* cli/cli-cmds.c (shell_escape, print_disassembly): Don't call
gdb_flush.
* c-valprint.c (c_val_print): Don't call gdb_flush.
* ada-valprint.c (ada_print_scalar): Don't call gdb_flush.
This replaces the pointer and length parameters of target_pass_signals
and target_program_signals with a gdb::array_view parameter, and fixes
the fallout.
In infrun.c, the signal_stop, signal_print, signal_program,
signal_catch, signal_pass globals are currently pointers to
heap-allocated memory. I see no point in that, so I converted them to
arrays. This allows simplifying the calls to
target_pass_signals/target_program_signals, since we can pass the
array directly, which can implicitly convert to gdb::array_view.
gdb/ChangeLog:
2019-01-24 Pedro Alves <palves@redhat.com>
* infrun.c (signal_stop, signal_print, signal_program)
(signal_catch, signal_pass): Now arrays instead of pointers.
(update_signals_program_target, do_target_resume)
(signal_catch_update, handle_command, _initialize_infrun): Adjust.
* linux-nat.c (linux_nat_target::pass_signals)
(linux_nat_target::create_inferior, linux_nat_target::attach):
Adjust.
* linux-nat.h (linux_nat_target::pass_signals): Adjust.
* nto-procfs.c (nto_procfs_target::pass_signals): Adjust.
* procfs.c (procfs_target::pass_signals): Adjust.
* record-full.c (record_full_target::resume): Adjust.
* remote.c (remote_target::pass_signals)
(remote_target::program_signals): Adjust.
* target-debug.h (target_debug_print_signals): Now takes a
gdb::array_view as parameter. Adjust.
* target.h (target_ops) <pass_signals, program_signals>: Replace
pointer and length parameters with gdb::array_view.
(target_pass_signals, target_program_signals): Likewise.
* target-delegates.c: Regenerate.
This updates a comment in fetch_inferior_event. The comment refers to
a cleanup that is now a scoped_restore_current_thread.
gdb/ChangeLog:
2019-01-23 Tom Tromey <tom@tromey.com>
* infrun.c (fetch_inferior_event): Update comment.
This removes the remaining cleanup from fetch_inferior_event,
replacing it with a SCOPE_EXIT. This required introducing a new scope
and reindenting.
gdb/ChangeLog:
2019-01-23 Tom Tromey <tom@tromey.com>
Pedro Alves <palves@redhat.com>
* infrun.c (reinstall_readline_callback_handler_cleanup): Remove
parameter.
(fetch_inferior_event): Use SCOPE_EXIT.
This removes the cleanup from stop_all_threads, replacing it with a
scope_exit.
gdb/ChangeLog:
2019-01-23 Tom Tromey <tom@tromey.com>
Pedro Alves <palves@redhat.com>
* infrun.c (disable_thread_events): Delete.
(stop_all_threads): Use SCOPE_EXIT.
This removes make_bpstat_clear_actions_cleanup, replacing it with uses
of scope_exit.
gdb/ChangeLog:
2019-01-23 Tom Tromey <tom@tromey.com>
Andrew Burgess <andrew.burgess@embecosm.com>
Pedro Alves <palves@redhat.com>
* infrun.c (fetch_inferior_event): Use scope_exit.
* utils.h (make_bpstat_clear_actions_cleanup): Don't declare.
* top.c (execute_command): Use scope_exit.
* breakpoint.c (bpstat_do_actions): Use scope_exit.
* utils.c (do_bpstat_clear_actions_cleanup)
(make_bpstat_clear_actions_cleanup): Remove.
v3: sorted earlier in the series, and replaces the cleanup in
fetch_inferior_event here too instead of in some other patch.
This removes delete_just_stopped_threads_infrun_breakpoints_cleanup,
replacing it with uses of scope_exit.
gdb/ChangeLog:
2019-01-23 Tom Tromey <tom@tromey.com>
Pedro Alves <palves@redhat.com>
* infrun.c: Include "common/scope-exit.h"
(delete_just_stopped_threads_infrun_breakpoints_cleanup): Remove.
(wait_for_inferior): Use SCOPE_EXIT.
(fetch_inferior_event): Use scope_exit.
This patch moves the per-inferior data related to displaced stepping to
be directly in the inferior structure, rather than in a container on the
side.
On notable difference is that previously, we deleted the state on
inferior exit, which guaranteed a clean state if re-using the inferior
for a new run or attach. We now need to reset the state manually.
At the same time, I changed step_saved_copy to be a gdb::byte_vector, so
it is automatically freed on destruction (which should plug the leak
reported here [1]).
[1] https://sourceware.org/ml/gdb-patches/2018-11/msg00202.html
gdb/ChangeLog:
* inferior.h (class inferior) <displaced_step_state>: New field.
* infrun.h (struct displaced_step_state): Move here from
infrun.c. Initialize fields, add constructor.
<inf>: Remove field.
<reset>: New method.
* infrun.c (struct displaced_step_inferior_state): Move to
infrun.h.
(displaced_step_inferior_states): Remove.
(get_displaced_stepping_state): Adust.
(displaced_step_in_progress_any_inferior): Adjust.
(displaced_step_in_progress_thread): Adjust.
(displaced_step_in_progress): Adjust.
(add_displaced_stepping_state): Remove.
(get_displaced_step_closure_by_addr): Adjust.
(remove_displaced_stepping_state): Remove.
(infrun_inferior_exit): Call displaced_step_state.reset.
(use_displaced_stepping): Don't check for NULL.
(displaced_step_prepare_throw): Call
get_displaced_stepping_state.
(displaced_step_fixup): Don't check for NULL.
(prepare_for_detach): Don't check for NULL.
This commit applies all changes made after running the gdb/copyright.py
script.
Note that one file was flagged by the script, due to an invalid
copyright header
(gdb/unittests/basic_string_view/element_access/char/empty.cc).
As the file was copied from GCC's libstdc++-v3 testsuite, this commit
leaves this file untouched for the time being; a patch to fix the header
was sent to gcc-patches first.
gdb/ChangeLog:
Update copyright year range in all GDB files.
I ran into a situation where attempting to make an inferior function
call would trigger an assertion, like this:
(gdb) call some_inferior_function ()
../../src/gdb/regcache.c:310: internal-error: void regcache::restore(readonly_detached_regcache*): Assertion `src != NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
The problem that triggers the assertion is that in the function
save_infcall_suspend_state, we basically did this:
1. Create empty infcall_suspend_state object.
2. Fill fields of infcall_suspend_state object.
The problem is causes is that if filling any of the fields triggered
an exception then the infcall_suspend_state object would be deleted
while in a partially filled in state.
In the specific case I encountered, I had a remote RISC-V target that
claimed in its target description to support floating point registers.
However, this was not true, and when GDB tried to read a floating
point register the remote sent back an error. This error would cause
an exception to be thrown while creating the
readonly_detached_regcache, which in turn caused GDB to try and delete
an infcall_suspend_state which didn't have any register state, and
this triggered the assertion.
To prevent this problem we have two possibilities, either, rewrite the
restore code the handle partially initialised infcall_suspend_state
objects, or, prevent partially initialised infcall_suspend_state
objects from existing. The second of these seems like a better
solution.
So, in this patch, I move the filling in of the different
infcall_suspend_state fields within a new constructor for
infcall_suspend_state. Now, if generating one of those fields fails
the destructor for infcall_suspend_state will not be executed and GDB
will not try to restore the partially saved state.
With this patch in place GDB now behaves like this:
(gdb) call some_inferior_function ()
Could not fetch register "ft0"; remote failure reply 'E99'
(gdb)
The inferior function call is aborted due to the error.
This has been tested against x86-64/Linux native, native-gdbserver,
and native-extended-gdbserver with no regressions. I've manually
tested this against my baddly behaving target and confirmed the
inferior function call is aborted as described above.
gdb/ChangeLog:
* infrun.c (infcall_suspend_state::infcall_suspend_state): New.
(infcall_suspend_state::registers): New.
(infcall_suspend_state::restore): New.
(infcall_suspend_state::thread_suspend): Rename to...
(infcall_suspend_state::m_thread_suspend): ...this.
(infcall_suspend_state::registers): Rename to...
(infcall_suspend_state::m_registers): ...this.
(infcall_suspend_state::siginfo_gdbarch): Rename to...
(infcall_suspend_state::m_siginfo_gdbarch): ...this.
(infcall_suspend_state::siginfo_data): Rename to...
(infcall_suspend_state::m_siginfo_data): ...this.
(save_infcall_suspend_state): Rewrite to use infcall_suspend_state
constructor.
(restore_infcall_suspend_state): Rewrite to use
infcall_suspend_state::restore method.
(get_infcall_suspend_state_regcache): Use
infcall_suspend_state::registers method.
As preparation for multi-target, this patch makes each inferior have
its own thread list.
This isn't absolutely necessary for multi-target, but simplifies
things. It originally stemmed from the desire to eliminate the
init_thread_list calls sprinkled around, plus it makes it more
efficient to iterate over threads of a given inferior (no need to
always iterate over threads of all inferiors).
We still need to iterate over threads of all inferiors in a number of
places, which means we'd need adjust the ALL_THREADS /
ALL_NON_EXITED_THREADS macros. However, naively tweaking those macros
to have an extra for loop, like:
#define ALL_THREADS (thr, inf) \
for (inf = inferior_list; inf; inf = inf->next) \
for (thr = inf->thread_list; thr; thr = thr->next)
causes problems with code that does "break" or "continue" within the
ALL_THREADS loop body. Plus, we need to declare the extra "inf" local
variable in order to pass it as temporary variable to ALL_THREADS
(etc.)
It gets even trickier when we consider extending the macros to filter
out threads matching a ptid_t and a target. The macros become tricker
to read/write. Been there.
An alternative (which was my next attempt), is to replace the
ALL_THREADS etc. iteration style with for_each_all_threads,
for_each_non_exited_threads, etc. functions which would take a
callback as parameter, which would usually be passed a lambda.
However, I did not find that satisfactory at all, because the
resulting code ends up a little less natural / more noisy to read,
write and debug/step-through (due to use of lambdas), and in many
places where we use "continue;" to skip to the next thread now need to
use "return;". (I ran into hard to debug bugs caused by a
continue/return confusion.)
I.e., before:
ALL_NON_EXITED_THREADS (tp)
{
if (tp->not_what_I_want)
continue;
// do something
}
would turn into:
for_each_non_exited_thread ([&] (thread_info *tp)
{
if (tp->not_what_I_want)
return;
// do something
});
Lastly, the solution I settled with was to replace the ALL_THREADS /
ALL_NON_EXITED_THREADS / ALL_INFERIORS macros with (C++20-like) ranges
and iterators, such that you can instead naturaly iterate over
threads/inferiors using range-for, like e.g,.:
// all threads, including THREAD_EXITED threads.
for (thread_info *tp : all_threads ())
{ .... }
// all non-exited threads.
for (thread_info *tp : all_non_exited_threads ())
{ .... }
// all non-exited threads of INF inferior.
for (thread_info *tp : inf->non_exited_threads ())
{ .... }
The all_non_exited_threads() function takes an optional filter ptid_t as
parameter, which is quite convenient when we need to iterate over
threads matching that filter. See e.g., how the
set_executing/set_stop_requested/finish_thread_state etc. functions in
thread.c end up being simplified.
Most of the patch thus is about adding the infrustructure for allowing
the above. Later on when we get to actual multi-target, these
functions/ranges/iterators will gain a "target_ops *" parameter so
that e.g., we can iterate over all threads of a given target that
match a given filter ptid_t.
The only entry points users needs to be aware of are the
all_threads/all_non_exited_threads etc. functions seen above. Thus,
those functions are declared in gdbthread.h/inferior.h. The actual
iterators/ranges are mainly "internals" and thus are put out of view
in the new thread-iter.h/thread-iter.c/inferior-iter.h files. That
keeps the gdbthread.h/inferior.h headers quite a bit more readable.
A common/safe-iterator.h header is added which adds a template that
can be used to build "safe" iterators, which are forward iterators
that can be used to replace the ALL_THREADS_SAFE macro and other
instances of the same idiom in future.
There's a little bit of shuffling of code between
gdbthread.h/thread.c/inferior.h in the patch. That is necessary in
order to avoid circular dependencies between the
gdbthread.h/inferior.h headers.
As for the init_thread_list calls sprinkled around, they're all
eliminated by this patch, and a new, central call is added to
inferior_appeared. Note how also related to that, there's a call to
init_wait_for_inferior in remote.c that is eliminated.
init_wait_for_inferior is currently responsible for discarding skipped
inline frames, which had to be moved elsewhere. Given that nowadays
we always have a thread even for single-threaded processes, the
natural place is to delete a frame's inline frame info when we delete
the thread. I.e., from clear_thread_inferior_resources.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* Makefile.in (COMMON_SFILES): Add thread-iter.c.
* breakpoint.c (breakpoints_should_be_inserted_now): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
(print_one_breakpoint_location): Replace ALL_INFERIORS with
all_inferiors.
* bsd-kvm.c: Include inferior.h.
* btrace.c (btrace_free_objfile): Replace ALL_NON_EXITED_THREADS
with all_non_exited_threads.
* common/filtered-iterator.h: New.
* common/safe-iterator.h: New.
* corelow.c (core_target_open): Don't call init_thread_list here.
* darwin-nat.c (thread_info_from_private_thread_info): Replace
ALL_THREADS with all_threads.
* fbsd-nat.c (fbsd_nat_target::resume): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fbsd-tdep.c (fbsd_make_corefile_notes): Replace
ALL_NON_EXITED_THREADS with inf->non_exited_threads.
* fork-child.c (postfork_hook): Don't call init_thread_list here.
* gdbarch-selftests.c (register_to_value_test): Adjust.
* gdbthread.h: Don't include "inferior.h" here.
(struct inferior): Forward declare.
(enum step_over_calls_kind): Moved here from inferior.h.
(thread_info::deletable): Definition moved to thread.c.
(find_thread_ptid (inferior *, ptid_t)): Declare.
(ALL_THREADS, ALL_THREADS_BY_INFERIOR, ALL_THREADS_SAFE): Delete.
Include "thread-iter.h".
(all_threads, all_non_exited_threads, all_threads_safe): New.
(any_thread_p): Declare.
(thread_list): Delete.
* infcmd.c (signal_command): Replace ALL_NON_EXITED_THREADS with
all_non_exited_threads.
(proceed_after_attach_callback): Delete.
(proceed_after_attach): Take an inferior pointer instead of an
integer PID. Adjust to use range-for.
(attach_post_wait): Pass down inferior pointer instead of pid.
Use range-for instead of ALL_NON_EXITED_THREADS.
(detach_command): Remove init_thread_list call.
* inferior-iter.h: New.
* inferior.c (struct delete_thread_of_inferior_arg): Delete.
(delete_thread_of_inferior): Delete.
(delete_inferior, exit_inferior_1): Use range-for with
inf->threads_safe() instead of iterate_over_threads.
(inferior_appeared): Call init_thread_list here.
(discard_all_inferiors): Use all_non_exited_inferiors.
(find_inferior_id, find_inferior_pid): Use all_inferiors.
(iterate_over_inferiors): Use all_inferiors_safe.
(have_inferiors, number_of_live_inferiors): Use
all_non_exited_inferiors.
(number_of_inferiors): Use all_inferiors and std::distance.
(print_inferior): Use all_inferiors.
* inferior.h: Include gdbthread.h.
(enum step_over_calls_kind): Moved to gdbthread.h.
(struct inferior) <thread_list>: New field.
<threads, non_exited_threads, threads_safe>: New methods.
(ALL_INFERIORS): Delete.
Include "inferior-iter.h".
(ALL_NON_EXITED_INFERIORS): Delete.
(all_inferiors_safe, all_inferiors, all_non_exited_inferiors): New
functions.
* inflow.c (child_interrupt, child_pass_ctrlc): Replace
ALL_NON_EXITED_THREADS with all_non_exited_threads.
* infrun.c (follow_exec): Use all_threads_safe.
(clear_proceed_status, proceed): Use all_non_exited_threads.
(init_wait_for_inferior): Don't clear inline frame state here.
(infrun_thread_stop_requested, for_each_just_stopped_thread): Use
all_threads instead of ALL_NON_EXITED_THREADS.
(random_pending_event_thread): Use all_non_exited_threads instead
of ALL_NON_EXITED_THREADS. Use a lambda for repeated code.
(clean_up_just_stopped_threads_fsms): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(handle_no_resumed): Use all_non_exited_threads instead of
ALL_NON_EXITED_THREADS. Use all_inferiors instead of
ALL_INFERIORS.
(restart_threads, switch_back_to_stepped_thread): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-nat.c (check_zombie_leaders): Replace ALL_INFERIORS with
all_inferiors.
(kill_unfollowed_fork_children): Use inf->non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* linux-tdep.c (linux_make_corefile_notes): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* linux-thread-db.c (thread_db_target::update_thread_list):
Replace ALL_INFERIORS with all_inferiors.
(thread_db_target::thread_handle_to_thread_info): Use
inf->non_exited_threads instead of ALL_NON_EXITED_THREADS.
* mi/mi-interp.c (multiple_inferiors_p): New.
(mi_on_resume_1): Simplify using all_non_exited_threads and
multiple_inferiors_p.
* mi/mi-main.c (mi_cmd_thread_list_ids): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* nto-procfs.c (nto_procfs_target::open): Don't call
init_thread_list here.
* record-btrace.c (record_btrace_target_open)
(record_btrace_target::stop_recording)
(record_btrace_target::close)
(record_btrace_target::record_is_replaying)
(record_btrace_target::resume, record_btrace_target::wait)
(record_btrace_target::record_stop_replaying): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* record-full.c (record_full_wait_1): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
* regcache.c (cooked_read_test): Remove reference to global
thread_list.
* remote-sim.c (gdbsim_target::create_inferior): Don't call
init_thread_list here.
* remote.c (remote_target::update_thread_list): Use
all_threads_safe instead of ALL_NON_EXITED_THREADS.
(remote_target::process_initial_stop_replies): Replace
ALL_INFERIORS with all_non_exited_inferiors and use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
(remote_target::open_1): Don't call init_thread_list here.
(remote_target::append_pending_thread_resumptions)
(remote_target::remote_resume_with_hc): Use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::commit_resume)
(remote_target::remove_new_fork_children): Replace ALL_INFERIORS
with all_non_exited_inferiors and use all_non_exited_threads
instead of ALL_NON_EXITED_THREADS.
(remote_target::kill_new_fork_children): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS. Remove
init_thread_list and init_wait_for_inferior calls.
(remote_target::remote_btrace_maybe_reopen)
(remote_target::thread_handle_to_thread_info): Use
all_non_exited_threads instead of ALL_NON_EXITED_THREADS.
* target.c (target_terminal::restore_inferior)
(target_terminal_is_ours_kind): Replace ALL_INFERIORS with
all_non_exited_inferiors.
* thread-iter.c: New file.
* thread-iter.h: New file.
* thread.c: Include "inline-frame.h".
(thread_list): Delete.
(clear_thread_inferior_resources): Call clear_inline_frame_state.
(init_thread_list): Use all_threads_safe instead of
ALL_THREADS_SAFE. Adjust to per-inferior thread lists.
(new_thread): Adjust to per-inferior thread lists.
(add_thread_silent): Pass inferior to find_thread_ptid.
(thread_info::deletable): New, moved from the header.
(delete_thread_1): Adjust to per-inferior thread lists.
(find_thread_global_id): Use inf->threads().
(find_thread_ptid): Use find_inferior_ptid and pass inferior to
find_thread_ptid.
(find_thread_ptid(inferior*, ptid_t)): New overload.
(iterate_over_threads): Use all_threads_safe.
(any_thread_p): New.
(thread_count): Use all_threads and std::distance.
(live_threads_count): Use all_non_exited_threads and
std::distance.
(valid_global_thread_id): Use all_threads.
(in_thread_list): Use find_thread_ptid.
(first_thread_of_inferior): Adjust to per-inferior thread lists.
(any_thread_of_inferior, any_live_thread_of_inferior): Use
inf->non_exited_threads().
(prune_threads, delete_exited_threads): Use all_threads_safe.
(thread_change_ptid): Pass inferior pointer to find_thread_ptid.
(set_resumed, set_running): Use all_non_exited_threads.
(is_thread_state, is_stopped, is_exited, is_running)
(is_executing): Delete.
(set_executing, set_stop_requested, finish_thread_state): Use
all_non_exited_threads.
(print_thread_info_1): Use all_inferiors and all_threads.
(thread_apply_all_command): Use all_non_exited_threads.
(thread_find_command): Use all_threads.
(update_threads_executing): Use all_non_exited_threads.
* tid-parse.c (parse_thread_id): Use inf->threads.
* x86-bsd-nat.c (x86bsd_dr_set): Use inf->non_exited_threads ().
A following commit to make each inferior have its own thread list
exposes a problem with bf93d7ba99 ("Add thread after updating gdbarch
when exec'ing"), which is that we can't defer adding the thread
because that breaks try_open_exec_file which deep inside ends up
calling inferior_thread():
#5 0x0000000000637c78 in internal_error(char const*, int, char const*, ...) (file=0xc151f8 "src/gdb/thread.c", line=165, fmt=0xc15180 "%s: Assertion `%s' failed.") at src/gdb/common/errors.c:55
#6 0x00000000008a3d80 in inferior_thread() () at src/gdb/thread.c:165
#7 0x0000000000456f91 in try_thread_db_load_1(thread_db_info*) (info=0x277eb00) at src/gdb/linux-thread-db.c:830
#8 0x0000000000457554 in try_thread_db_load(char const*, int) (library=0xb01a4f "libthread_db.so.1", check_auto_load_safe=0)
at src/gdb/linux-thread-db.c:1002
#9 0x0000000000457861 in try_thread_db_load_from_sdir() () at src/gdb/linux-thread-db.c:1079
#10 0x0000000000457b72 in thread_db_load_search() () at src/gdb/linux-thread-db.c:1134
#11 0x0000000000457d29 in thread_db_load() () at src/gdb/linux-thread-db.c:1192
#12 0x0000000000457e51 in check_for_thread_db() () at src/gdb/linux-thread-db.c:1244
#13 0x0000000000457ed2 in thread_db_new_objfile(objfile*) (objfile=0x270ff60) at src/gdb/linux-thread-db.c:1273
#14 0x000000000045a92e in std::_Function_handler<void (objfile*), void (*)(objfile*)>::_M_invoke(std::_Any_data const&, objfile*&&) (__functor=..., __args#0=@0x7ffef3efe140: 0x270ff60) at /usr/include/c++/7/bits/std_function.h:316
#15 0x00000000007bbebf in std::function<void (objfile*)>::operator()(objfile*) const (this=0x24e1d18, __args#0=0x270ff60)
at /usr/include/c++/7/bits/std_function.h:706
#16 0x00000000007bba86 in gdb::observers::observable<objfile*>::notify(objfile*) const (this=0x117ce80 <gdb::observers::new_objfile>, args#0=0x270ff60) at src/gdb/common/observable.h:106
#17 0x0000000000856000 in symbol_file_add_with_addrs(bfd*, char const*, symfile_add_flags, section_addr_info*, objfile_flags, objfile*) (abfd=0x1d7dae0, name=0x254bfc0 "/ho
The problem is latent currently because inferior_thread() at that
point manages to return a thread, even though it's the wrong one (of
the old inferior).
The problem originally fixed by bf93d7ba99 was:
(...) we should avoid doing register reads
after a process does an exec and before we've updated that inferior's
gdbarch. Otherwise, we may interpret the registers using the wrong
architecture.
(...) The call to "add_thread" done just after adding the inferior is
problematic, because it ends up reading the registers (because the ptid
is re-used, we end up doing a switch_to_thread to it, which tries to
update stop_pc). (...)
The register-reading issue is no longer a problem nowadays, ever since
switch_to_thread stopped reading the stop_pc in git commit
f2ffa92bbc ("gdb: Eliminate the 'stop_pc' global").
So this commit basically reverts bf93d7ba99.
gdb/ChangeLog:
2018-11-22 Pedro Alves <palves@redhat.com>
* infrun.c (follow_exec) <set follow-exec new>: Add thread and
switch to it before calling into try_open_exec_file.
Commit
39a36629f6 ("Use std::forward_list for displaced_step_inferior_states")
missed removing the "next" field, while changing the hand-made linked
list in favor of std::forward_list. This patch fixes that.
gdb/ChangeLog:
* infrun.c (displaced_step_inferior_state) <next>: Remove.
Use std::forward_list instead of manually implemented list. This
simplifies a bit the code, especially around removal.
Regtested on the buildbot. There are some failures as always, but I
think they are unrelated.
gdb/ChangeLog:
* infrun.c (displaced_step_inferior_states): Change type to
std::forward_list.
(get_displaced_stepping_state): Adjust.
(displaced_step_in_progress_any_inferior): Adjust.
(add_displaced_stepping_state): Adjust.
(remove_displaced_stepping_state): Adjust.
Here's a summary of PR 23368:
#include <unistd.h>
int main (void)
{
char *exec_args[] = { "/bin/ls", NULL };
execve (exec_args[0], exec_args, NULL);
}
$ gdb -nx t -ex "catch exec" -ex "set follow-exec-mode new" -ex run
...
[1] + 13146 suspended (tty output) gdb -q -nx t -ex "catch exec" -ex "set follow-exec-mode new" -ex run
$
Here's what happens: when the inferior execs with "follow-exec-mode
new", we first "mourn" it before creating the new one. This ends up
calling inflow_inferior_exit, which sets the per-inferior terminal state
to "is_ours":
inf->terminal_state = target_terminal_state::is_ours;
At this point, the inferior's terminal_state is is_ours, while the
"reality", tracked by gdb_tty_state, is is_inferior (GDB doesn't own the
terminal).
Later, we continue processing the exec inferior event and decide we want
to stop (because of the "catch exec") and call target_terminal::ours to
make sure we own the terminal. However, we don't actually go to the
target backend to change the settings, because the core thinks that no
inferior owns the terminal (inf->terminal_state is
target_terminal_state::is_ours, as checked in
target_terminal_is_ours_kind, for both inferiors). When something in
readline tries to mess with the terminal settings, it generates a
SIGTTOU.
This patch fixes this by tranferring the state of the terminal from the
old inferior to the new inferior.
gdb/ChangeLog:
PR gdb/23368
* infrun.c (follow_exec): In the follow_exec_mode_new case,
transfer terminal state from old new new inferior.
* terminal.h (swap_terminal_info): New function.
* inflow.c (swap_terminal_info): New function.
This fixes all the straightforward -Wshadow=local warnings in gdb. A
few standard approaches are used here:
* Renaming an inner (or outer, but more commonly inner) variable;
* Lowering a declaration to avoid a clash;
* Moving a declaration into a more inner scope to avoid a clash,
including the special case of moving a declaration into a loop header.
I did not consider any of the changes in this patch to be particularly
noteworthy, though of course they should all still be examined.
gdb/ChangeLog
2018-10-04 Tom Tromey <tom@tromey.com>
* ctf.c (SET_ARRAY_FIELD): Rename "u32".
* p-valprint.c (pascal_val_print): Split inner "i" variable.
* xtensa-tdep.c (xtensa_push_dummy_call): Declare "i" in loop
header.
* xstormy16-tdep.c (xstormy16_push_dummy_call): Declare "val" in
more inner scope.
* xcoffread.c (read_xcoff_symtab): Rename inner "symbol".
* varobj.c (varobj_update): Rename inner "newobj",
"type_changed".
* valprint.c (generic_emit_char): Rename inner "buf".
* valops.c (find_overload_match): Rename inner "temp".
(value_struct_elt_for_reference): Declare "v" in more inner
scope.
* v850-tdep.c (v850_push_dummy_call): Rename "len".
* unittests/array-view-selftests.c (run_tests): Rename inner
"vec".
* tui/tui-stack.c (tui_show_frame_info): Declare "i" in loop
header.
* tracepoint.c (merge_uploaded_trace_state_variables): Declare
"tsv" in more inner scope.
(print_one_static_tracepoint_marker): Rename inner
"tuple_emitter".
* tic6x-tdep.c (tic6x_analyze_prologue): Declare "inst" lower.
(tic6x_push_dummy_call): Don't redeclare "addr".
* target-float.c: Declare "dto" lower.
* symtab.c (lookup_local_symbol): Rename inner "sym".
(find_pc_sect_line): Rename inner "pc".
* stack.c (print_frame): Don't redeclare "gdbarch".
(return_command): Rename inner "gdbarch".
* s390-tdep.c (s390_prologue_frame_unwind_cache): Renam inner
"sp".
* rust-lang.c (rust_internal_print_type): Declare "i" in loop
header.
* rs6000-tdep.c (ppc_process_record): Rename inner "addr".
* riscv-tdep.c (riscv_push_dummy_call): Declare "info" in inner
scope.
* remote.c (remote_target::update_thread_list): Don't redeclare
"tp".
(remote_target::process_initial_stop_replies): Rename inner
"thread".
(remote_target::remote_parse_stop_reply): Don't redeclare "p".
(remote_target::wait_as): Don't redeclare "stop_reply".
(remote_target::get_thread_local_address): Rename inner
"result".
(remote_target::get_tib_address): Likewise.
Simon pointed out that save_infcall_suspend_state and
save_infcall_control_state could return unique pointers. This patch
implements this idea.
gdb/ChangeLog
2018-09-17 Tom Tromey <tom@tromey.com>
* infrun.c (save_infcall_suspend_state): Return
infcall_suspend_state_up.
(save_infcall_control_state): Return infcall_control_state_up.
* inferior.h (save_infcall_suspend_state)
(save_infcall_control_state): Declare later. Return unique
pointers.
This removes release_stop_context_cleanup, replacing it with a
stop_context destructor. It also mildly c++-ifies this struct.
gdb/ChangeLog
2018-09-17 Tom Tromey <tom@tromey.com>
* infrun.c (struct stop_context): Declare constructor,
destructor, "changed" method.
(stop_context::stop_context): Rename from save_stop_context.
(stop_context::~stop_context): Rename from
release_stop_context_cleanup.
(normal_stop): Update.
(stop_context::changed): Rename from stop_context_changed. Return
bool.
This removes a couple of cleanups from infrun by introducing a couple
of unique_ptr specializations.
gdb/ChangeLog
2018-09-17 Tom Tromey <tom@tromey.com>
* inferior.h (struct infcall_suspend_state_deleter): New.
(infcall_suspend_state_up): New typedef.
(struct infcall_control_state_deleter): New.
(infcall_control_state_up): New typedef.
(make_cleanup_restore_infcall_suspend_state)
(make_cleanup_restore_infcall_control_state): Don't declare.
* infcall.c (call_function_by_hand_dummy): Update.
* infrun.c (do_restore_infcall_suspend_state_cleanup)
(make_cleanup_restore_infcall_suspend_state): Remove.
(do_restore_infcall_control_state_cleanup)
(make_cleanup_restore_infcall_control_state): Remove.
This removes a cleanup from infrun.c by taking advantage of the
previous patch to introduce a use of unique_xmalloc_ptr.
gdb/ChangeLog
2018-09-17 Tom Tromey <tom@tromey.com>
* infrun.c (struct infcall_suspend_state) <registers>: Now a
unique_ptr.
<siginfo_data>: Now a unique_xmalloc_ptr.
(save_infcall_suspend_state, restore_infcall_suspend_state)
(discard_infcall_suspend_state)
(get_infcall_suspend_state_regcache): Update.
This changes infrun.c to use new and delete for infcall_suspend_state.
This enables the coming cleanups.
gdb/ChangeLog
2018-09-17 Tom Tromey <tom@tromey.com>
* gdbthread.h (struct thread_suspend_state): Add initializers.
(class thread_info) <suspend>: Remove initializer.
* infrun.c (struct infcall_suspend_state): Add initializers.
(save_infcall_suspend_state): Use new.
(discard_infcall_suspend_state): Use delete.
An earlier version of this patch used the returned block in conjunction
with BLOCK_ENTRY_PC to set stop_func_start in fill_in_stop_func() in
infrun.c. While I think this was the correct thing to do, changes
to find_inferior_partial_function could potentially end up with
stop_func_end < stop_func_start, which is definitely wrong. For
this case, we want to set both stop_func_start and stop_func_end
to the start and end of the range containing the function's entry
pc.
I think that this functionality will be useful in many other places
too - it probably ought to be used in all of the various prologue
analyzers in GDB.
The change to infrun.c was simple: the call to
find_pc_partial_function was replaced with a call to
find_function_entry_range_from_pc. The difference between these two
functions is that find_pc_partial_entry_function will (potentially)
return the start and end address corresponding to the range in which
PC is found, but find_function_entry_range_from_pc will (again,
potentially) return the start and end address of the range containing
the entry pc. find_pc_partial_function has the property that
*ADDRESS <= PC < *ENDADDR. This condition does not necessarily hold
for the outputs of find_function_entry_range_from_pc.
It should be noted that for functions which contain only a single
range, the outputs of find_pc_partial_function and
find_function_entry_range_from_pc are identical.
I think it might happen that find_function_entry_range_from_pc will come
to be used in place of many of the calls to find_pc_partial_function
within GDB. Care must be taken in making this change, however, since
some of this code depends on the *ADDRESS <= PC < *ENDADDR property.
Finally, a note regarding the name: I had initially chosen a different
name with a find_pc_partial_ prefix, but Simon suggested the current
name citing the goal of eventually making naming consistent using
the form find_X_from_Y. In this case X is "function_entry_range" and
Y is "pc". Both the name and rationale made sense to me, so that's
how it came to be.
gdb/ChangeLog:
* infrun.c (fill_in_stop_func): Use find_function_entry_range_from_pc
in place of find_pc_partial_function.
* blockframe.c (find_function_entry_range_from_pc): New function.
* symtab.h (find_function_entry_range_from_pc): Declare and document.
Make the infrun.c:resume function static, and update the header
comment on the infrun.c:proceed function. There should be no user
visible change after this commit.
gdb/ChangeLog:
* infrun.c (resume): Make static, add forward declaration.
(proceed): Update header comment.
* infrun.h (resume): Delete declaration.
Luis Machado
Christian Biesinger
Simon Marchi
Tom de Vries
Pedro Alves
Kevin Buettner
Tom Tromey
Tom Tromey
Philippe Waroquiers
Simon Marchi
Joel Brobecker
Andrew Burgess