Now that the ppc64 breakpoint regression is fixed, running the
gdb.cell test suite showed a few more test case problems, caused
by tests that haven't been updated to adapt to GDB changes.
gdb/testsuite/ChangeLog:
2017-11-30 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.cell/gcore.exp: Fix typo when setting spu_bin.
Update for changed thread numbering.
* gdb.cell/bt.exp: Update for changed GDB output.
local-board.exp was introduced recently, containing the code required to
force the gdbserver boards to be non-remote (from the DejaGNU point of
view). Other board files use the same trick of forcing isremote to 0.
Instead of doing it by hand in each file, include local-board.exp.
gdb/testsuite/ChangeLog:
* boards/cc-with-tweaks.exp: Include local-board.exp instead of
setting isremote by hand.
* boards/dwarf4-gdb-index.exp: Likewise.
* boards/fission.exp: Likewise.
* boards/stabs.exp: Likewise.
gdb.linespec/cpls-ops.exp is currently failing on x86-64 -m32 and other
32-bit ports:
b test_op_new::operator new(unsigned int) FAIL: gdb.linespec/cpls-ops.exp: operator-new: tab complete "b test_op_new::operator" (timeout)
^CQuit
(gdb) complete b test_op_new::operator
b test_op_new::operator new(unsigned int)
(gdb) FAIL: gdb.linespec/cpls-ops.exp: operator-new: cmd complete "b test_op_new::operator"
The problem is simply that the testcase incorrectly assumes that
size_t is "unsigned long".
Fix this by extracting the right type with the "ptype" command.
gdb/testsuite/ChangeLog:
2017-11-30 Pedro Alves <palves@redhat.com>
* gdb.linespec/cpls-ops.exp
(check_explicit_skips_function_argument): Extract the underlying
type of size_t instead of hardcoding it.
This is the previously mentioned patch to get rid of
unstructured/ioctl-based procfs support in procfs.c. Given that support
for structured procfs was introduced in Solaris 2.6 back in 1997 and
we're just removing support for Solaris < 10, there's no point in
carrying that baggage (and tons of support for IRIX and OSF/1 as well)
around any longer.
Most of the patch should be straightforward (removing support for
!NEW_PROC_API, non-Solaris OSes and pre-Solaris 10 quirks).
Only a few points need explanations:
* <sys/syscall.h> was already included unconditionally in most places,
so there's no need to have guards in a few remaining ones.
* configure.host already obsoletes i?86-*-sysv4.2, i?86-*-sysv5, so
NEW_PROC_API detection for those in configure.ac can go.
* I'm still including <sys/procfs.h> with #define _STRUCTURED_PROC 1.
Theoretically, it would be better to include <procfs.h> on Solaris
(which includes that define), but that breaks the build over
<procfs.h> vs. gdb's "procfs.h", and doesn't exist on Linux.
* I've regenerated syscall_table[] in proc-events.c with a small script
from Solaris 10, 11.3, 11.4 <sys/syscall.h>, so there should be no
traces of older Solaris versions and other OSes left.
* prsysent_t and DYNAMIC_SYSCALLS was only used for AIX 5, but AIX
doesn't use procfs.c any longer, so all related code can go.
The patch was generated with diff -w so one can easier see changes
without being distracted by simple reindentations.
So far, it has only been compiled and smoke-tested on
amd64-pc-solaris2.1[01], sparcv9-sun-solaris2.1[01], and
x86_64-pc-linux-gnu. Certainly needs more testing (Solaris 11.3
vs. 11.4, 32-bit gdb, testsuite once I've figured out what's wrong on
Solaris 10 etc.), but it's enough to get a first impression how much
cleanup is possible here.
* configure.ac Don't check for sys/fault.h, sys/syscall.h,
sys/proc.h.
(NEW_PROC_API): Remove.
(prsysent_t, pr_sigset_t, pr_sigaction64_t, pr_siginfo64_t):
Likewise.
* common/common.m4 (GDB_AC_COMMON): Don't check for sys/syscall.h.
* configure: Regenerate.
* config.in: Regenerate.
* gdbserver/configure: Regenerate.
* gdbserver/config.in: Regenerate.
* i386-sol2-nat.c (_initialize_amd64_sol2_nat): Remove
NEW_PROC_API test.
* sparc-sol2-nat.c (_initialize_sparc_sol2_nat): Likewise.
* linux-btrace.c: Remove HAVE_SYS_SYSCALL_H test.
* proc-api.c: Remove !NEW_PROC_API support.
Remove HAVE_SYS_PROC_H and HAVE_SYS_USER_H tests.
Remove tests for macros always defined on Solaris.
* proc-events.c: Remove !NEW_PROC_API support.
Remove Remove HAVE_SYS_SYSCALL_H, HAVE_SYS_PROC_H and
HAVE_SYS_USER_H tests.
(init_syscall_table): Remove non-Solaris syscalls.
Remove tests for syscalls present on all Solaris versions.
Add missing Solaris 10+ syscalls.
(signal_table): Remove non-Solaris signals.
Remove tests for signals present on all Solaris versions.
(fault_table): Remove non-Solaris faults.
Remove tests for faults present on all Solaris versions.
* proc-flags.c: Remove !NEW_PROC_API support.
(pr_flag_table): Remove non-Solaris and pre-Solaris 7 comments.
Remove non-Solaris flags.
* proc-why.c: Remove !NEW_PROC_API support.
(pr_why_table): Remove meaningless comments.
Remove tests for reasons present on all Solaris versions.
Remove OSF/1 cases.
(proc_prettyfprint_why): Likewise.
* procfs.c: Remove !NEW_PROC_API and DYNAMIC_SYSCALLS support.
Remove HAVE_SYS_FAULT_H and HAVE_SYS_SYSCALL_H tests.
Remove WA_READ test, IRIX watchpoint support.
(gdb_sigset_t, gdb_sigaction_t, gdb_siginfo_t): Replace by base
types. Change users.
(gdb_praddset, gdb_prdelset, gdb_premptysysset, gdb_praddsysset)
(gdb_prdelset, gdb_pr_issyssetmember): Replace by base macros.
Change callers.
Remove CTL_PROC_NAME_FMT tests.
(gdb_prstatus_t, gdb_lwpstatus_t): Replace by base types. Change
users.
(sysset_t_size): Remove. Use sizeof (sysset_t) in callers.
Remove PROCFS_DONT_PIOCSSIG_CURSIG support.
(proc_modify_flag): Replace GDBRESET by PCUNSET.
Remove PR_ASYNC, PR_KLC tests.
(proc_unset_inherit_on_fork): Remove PR_ASYNC test.
(proc_parent_pid): Remove PCWATCH etc. tests.
(proc_set_watchpoint): Remove !PCWATCH && !PIOCSWATCH support.
Remove PCAGENT test.
(proc_get_nthreads) [PIOCNTHR && PIOCTLIST]: Remove.
Remove SYS_lwpcreate || SYS_lwp_create test.
(proc_get_current_thread): Likewise.
[PIOCNTHR && PIOCTLIST]: Remove.
[PIOCLSTATUS]: Remove.
(procfs_debug_inferior): Remove non-Solaris cases, conditionals.
[PRFS_STOPEXEC]: Remove.
(syscall_is_lwp_exit): Remove non-Solaris cases, conditionals.
(syscall_is_exit): Likewise.
(syscall_is_exec): Likewise.
(syscall_is_lwp_create): Likewise.
Remove SYS_syssgi support.
(procfs_wait): Remove PR_ASYNC, !PIOCSSPCACT tests.
[SYS_syssgi]: Remove.
Remove non-Solaris cases, conditionals.
(unconditionally_kill_inferior) [PROCFS_NEED_PIOCSSIG_FOR_KILL]:
Remove.
(procfs_init_inferior) [SYS_syssgi]: Remove.
(procfs_set_exec_trap) [PRFS_STOPEXEC]: Remove.
(procfs_inferior_created) [SYS_syssgi]: Remove.
(procfs_set_watchpoint): Remove !AIX5 test.
(procfs_stopped_by_watchpoint): Remove FLTWATCH test, FLTKWATCH
case.
(mappingflags) [MA_PHYS]: Remove.
(info_mappings_callback): Remove PCAGENT test.
Remove PIOCOPENLWP || PCAGENT test.
Building current gdb mainline with gcc 7.1 on Solaris 11.4 fails:
/vol/src/gnu/gdb/gdb/dist/gdb/sol-thread.c: In function `void _initialize_sol_thread()':
/vol/src/gnu/gdb/gdb/dist/gdb/sol-thread.c:1229:66: error: invalid conversion from `void (*)(char*, int)' to `void (*)(const char*, int)' [-fpermissive]
_("Show info on Solaris user threads."), &maintenanceinfolist);
^
In file included from /vol/src/gnu/gdb/gdb/dist/gdb/completer.h:21:0,
from /vol/src/gnu/gdb/gdb/dist/gdb/symtab.h:31,
from /vol/src/gnu/gdb/gdb/dist/gdb/language.h:26,
from /vol/src/gnu/gdb/gdb/dist/gdb/frame.h:72,
from /vol/src/gnu/gdb/gdb/dist/gdb/gdbarch.h:39,
from /vol/src/gnu/gdb/gdb/dist/gdb/defs.h:557,
from /vol/src/gnu/gdb/gdb/dist/gdb/sol-thread.c:51:
/vol/src/gnu/gdb/gdb/dist/gdb/command.h:140:33: note: initializing argument 3 of `cmd_list_element* add_cmd(const char*, command_class, void (*)(const char*, int), const char*, cmd_list_element**)'
extern struct cmd_list_element *add_cmd (const char *, enum command_class,
^~~~~~~
The following patch allows compilation to succeed on i386-pc-solaris2.11
and sparc-sun-solaris2.11.
* sol-thread.c (info_solthreads): Constify args.
Cast args to void *.
mpfr.h uses a non-portable test to guess if intmax_t is available and
if API functions using intmax_t should be exposed. Define
MPFR_USE_INTMAX_T to override the non-portable test and always expose
these functions. This fixes the build on platforms where the test
guesses incorrectly.
gdb/ChangeLog:
* target-float.c [HAVE_LIBMPFR]: Define MPFR_USE_INTMAX_T.
This patch fixes a potential issue which was noticed by code inspection:
ada-lang.c::to_fixed_range_type uses gdbtypes.c::create_static_range_type
to create most of the range type, which relies on create_range_type to
do most of the work. The latter has the following piece of code which
sets the length of the range type to match the length of the index_type:
if (TYPE_STUB (index_type))
TYPE_TARGET_STUB (result_type) = 1;
else
TYPE_LENGTH (result_type) = TYPE_LENGTH (check_typedef (index_type));
In Ada, it is actually possible to have a range type whose size
is smaller than its base type. For instance, with:
type Unsigned2_T is range 0 .. 2 ** 16 - 1;
for Unsigned2_T'SIZE use 16;
The compiler generates the following DWARF:
.uleb128 0x3 # (DIE (0x4e) DW_TAG_subrange_type)
.byte 0x2 # DW_AT_byte_size
.byte 0 # DW_AT_lower_bound
.value 0xffff # DW_AT_upper_bound
.long .LASF64 # DW_AT_name: "try__unsigned2_t___XDLU_0__65535"
.long 0x616 # DW_AT_type
... which points to the following base type...
.uleb128 0x1d # (DIE (0x616) DW_TAG_base_type)
.byte 0x4 # DW_AT_byte_size
.byte 0x5 # DW_AT_encoding
.long .LASF57 # DW_AT_name: "try__Tunsigned2_tB"
# DW_AT_artificial
... which has a size of 4 bytes.
With a type like this one, create_range_type returns a type whose
size is 4 bytes, instead of 2, which is not what we we would normally
expect.
Currently, this function is only used to handle array index types,
so the length of the type actually does not matter and there should
not be any user-visible consequences of the current behavior. But
it seems best to plug this latent bug now, rather than wait for it
to surface....
gdb/ChangeLog:
* ada-lang.c (to_fixed_range_type): Make sure that the size
of the range type being returned is the same as the size
of the range type being fixed.
Tested on x86_64-linux, no regression.
Trying to set a breakpoint in a function with an ABI tag does not work
currently. E.g., debugging gdb itself, we see this with the
"string_printf" function:
(top-gdb) b string_print [TAB]
(top-gdb) b string_printf[abi:cxx11](char const*, ...) [RET]
No source file named string_printf[abi.
Make breakpoint pending on future shared library load? (y or [n])
Quoting doesn't help:
(top-gdb) b 'string_printf[abi:cxx11]'(char const*, ...)
malformed linespec error: unexpected string, "(char const*, ...)"
(top-gdb) b 'string_printf[abi:cxx11](char const*, ...)'
No source file named string_printf[abi.
Make breakpoint pending on future shared library load? (y or [n]) n
This patch fixes this, and takes it a bit further.
The actual symbol name as demangled by libiberty's demangler is really
string_printf[abi:cxx11](char const*, ...)
however, this patch makes it possible to set the breakpoint with
string_printf(char const*, ...)
too. I.e., ignoring the ABI tag.
And to match, it teaches the completer to complete the symbol name
without the ABI tag, i.e.,
"string_pri<TAB>" -> "string_printf(char const*, ...)"
If however, you really want to break on a symbol with the tag, then
you simply start writing the tag, and GDB will preserve it, like:
"string_printf[a<TAB>" -> "string_printf[abi:cxx11](char const*, ...)"
Grows the gdb.linespec/ tests like this:
-# of expected passes 8977
+# of expected passes 9176
gdb/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
PR c++/19436
* NEWS: Mention setting breakpoints on functions with C++ ABI
tags.
* completer.h (completion_match_for_lcd) <match,
mark_ignored_range>: New methods.
<finish>: Consider ignored ranges.
<clear>: Clear ignored ranges.
<m_ignored_ranges, m_finished_storage>: New fields.
* cp-support.c (cp_search_name_hash): Ignore ABI tags.
(cp_symbol_name_matches_1, cp_fq_symbol_name_matches): Pass the
completion_match_for_lcd pointer to strncmp_iw_with_mode.
(test_cp_symbol_name_cmp): Add [abi:...] tags unit tests.
* language.c (default_symbol_name_matcher): Pass the
completion_match_for_lcd pointer to strncmp_iw_with_mode.
* linespec.c (linespec_lexer_lex_string): Don't tokenize ABI tags.
* utils.c (skip_abi_tag): New function.
(strncmp_iw_with_mode): Add completion_match_for_lcd parameter.
Handle ABI tags.
* utils.h (strncmp_iw_with_mode): Add completion_match_for_lcd
parameter.
gdb/testsuite/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
PR c++/19436
* gdb.linespec/cpls-abi-tag.cc: New file.
* gdb.linespec/cpls-abi-tag.exp: New file.
gdb/doc/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
PR c++/19436
* gdb.texinfo (Debugging C Plus Plus): Document setting
breakpoints in functions with ABI tags.
This patch teaches GDB about setting breakpoints in all scopes
(namespaces and classes) by default.
Here's a contrived example:
(gdb) b func<tab>
(anonymous namespace)::A::function() Bn::(anonymous namespace)::B::function() function(int, int)
(anonymous namespace)::B::function() Bn::(anonymous namespace)::function() gdb::(anonymous namespace)::A::function()
(anonymous namespace)::B::function() const Bn::(anonymous namespace)::function(int, int) gdb::(anonymous namespace)::function()
(anonymous namespace)::function() Bn::B::func() gdb::(anonymous namespace)::function(int, int)
(anonymous namespace)::function(int, int) Bn::B::function() gdb::A::func()
A::func() Bn::func() gdb::A::function()
A::function() Bn::function() gdb::func()
B::func() Bn::function(int, int) gdb::function()
B::function() Bn::function(long) gdb::function(int, int)
B::function() const func() gdb::function(long)
B::function_const() const function()
(gdb) b function
Breakpoint 1 at 0x4005ce: function. (26 locations)
(gdb) b B::function<tab>
(anonymous namespace)::B::function() B::function() const Bn::B::function()
(anonymous namespace)::B::function() const B::function_const() const
B::function() Bn::(anonymous namespace)::B::function()
(gdb) b B::function
Breakpoint 1 at 0x40072c: B::function. (6 locations)
To get back the original behavior of interpreting the function name as
a fully-qualified name, you can use the new "-qualified" (or "-q")
option/flag (added by this commit). For example:
(gdb) b B::function
(anonymous namespace)::B::function() B::function() const Bn::B::function()
(anonymous namespace)::B::function() const B::function_const() const
B::function() Bn::(anonymous namespace)::B::function()
vs:
(gdb) b -qualified B::function
B::function() B::function() const B::function_const() const
I've chosen "-qualified" / "-q" because "-f" (for "full" or
"fully-qualified") is already taken for "-function".
Note: the "-qualified" option works with both linespecs and explicit
locations. I.e., these are equivalent:
(gdb) b -q func
(gdb) b -q -f func
and so are these:
(gdb) b -q filename.cc:func
(gdb) b -q -s filename.cc -f func
(gdb) b -s filename.cc -q -f func
(gdb) b -s filename.cc -f func -q
To better understand why I consider wild matching the better default,
consider what happens when we get to the point when _all_ of GDB is
wrapped under "namespace gdb {}". I have a patch series that does
that, and when I started debugging that GDB, I immediately became
frustrated. You'd have to write "b gdb::internal_error", "b
gdb::foo", "b gdb::bar", etc. etc., which gets annoying pretty
quickly. OTOH, consider how this makes it very easy to set
breakpoints in classes wrapped in anonymous namespaces. You just
don't think of them, GDB finds the symbols for you automatically.
(At the Cauldron a couple months ago, several people told me that they
run into a similar issue when debugging other C++ projects. One
example was when debugging LLVM, which puts all its code under the
"llvm" namespace.)
Implementation-wise, what the patch does is:
- makes C++ symbol name hashing only consider the last component of
a symbol name. (so that we can look up symbol names by
last-component name only).
- adds a C++ symbol name matcher for symbol_name_match_type::WILD,
which ignores missing leading specifiers / components.
- adjusts a few preexisting testsuite tests to use "-qualified" when
they mean it.
- adds new testsuite tests.
- adds unit tests.
Grows the gdb.linespec/ tests like this:
-# of expected passes 7823
+# of expected passes 8977
gdb/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* NEWS: Mention that breakpoints on C++ functions are now set on
on all namespaces/classes by default, and mention "break
-qualified".
* ax-gdb.c (agent_command_1): Adjust to pass a
symbol_name_match_type to new_linespec_location.
* breakpoint.c (parse_breakpoint_sals): Adjust to
get_linespec_location's return type change.
(strace_marker_create_sals_from_location): Adjust to pass a
symbol_name_match_type to new_linespec_location.
(strace_marker_decode_location): Adjust to get_linespec_location's
return type change.
(strace_command): Adjust to pass a symbol_name_match_type to
new_linespec_location.
(LOCATION_HELP_STRING): Add paragraph about wildmatching, and
mention "-qualified".
* c-lang.c (cplus_language_defn): Install cp_search_name_hash.
* completer.c (explicit_location_match_type::MATCH_QUALIFIED): New
enumerator.
(complete_address_and_linespec_locations): New parameter
'match_type'. Pass it down.
(explicit_options): Add "-qualified".
(collect_explicit_location_matches): Pass the requested match type
to the linespec completers. Handle MATCH_QUALIFIED.
(location_completer): Handle "-qualified" combined with linespecs.
* cp-support.c (cp_search_name_hash): New.
(cp_symbol_name_matches_1): Implement wild matching for C++.
(cp_fq_symbol_name_matches): Reimplement.
(cp_get_symbol_name_matcher): Return different matchers depending
on the lookup name's match type.
(selftests::test_cp_symbol_name_matches): Add wild matching tests.
* cp-support.h (cp_search_name_hash): New declaration.
* dwarf2read.c
(selftests::dw2_expand_symtabs_matching::test_symbols): Add
symbols.
(test_dw2_expand_symtabs_matching_symbol): Add wild matching
tests.
* guile/scm-breakpoint.c (gdbscm_register_breakpoint_x): Adjust to
pass a symbol_name_match_type to new_linespec_location.
* linespec.c (linespec_parse_basic): Lookup function symbols using
the parser's symbol name match type.
(convert_explicit_location_to_linespec): New
symbol_name_match_type parameter. Pass it down to
find_linespec_symbols.
(convert_explicit_location_to_sals): Pass the location's name
match type to convert_explicit_location_to_linespec.
(parse_linespec): New match_type parameter. Save it in the
parser.
(linespec_parser_new): Default to symbol_name_match_type::WILD.
(linespec_complete_function): New symbol_name_match_type
parameter. Use it.
(complete_linespec_component): Pass down the parser's recorded
name match type.
(linespec_complete_label): New symbol_name_match_type parameter.
Use it.
(linespec_complete): New symbol_name_match_type parameter. Save
it in the parser and pass it down. Adjust to
get_linespec_location's prototype change.
(find_function_symbols, find_linespec_symbols): New
symbol_name_match_type parameter. Pass it down instead of
assuming symbol_name_match_type::WILD.
* linespec.h (linespec_complete, linespec_complete_function)
(linespec_complete_label): New symbol_name_match_type parameter.
* location.c (event_location::linespec_location): Now a struct
linespec_location.
(EL_LINESPEC): Adjust.
(initialize_explicit_location): Default to
symbol_name_match_type::WILD.
(new_linespec_location): New symbol_name_match_type parameter.
Record it in the location.
(get_linespec_location): Now returns a struct linespec_location.
(new_explicit_location): Also copy func_name_match_type.
(explicit_to_string_internal)
(string_to_explicit_location): Handle "-qualified".
(copy_event_location): Adjust to LINESPEC_LOCATION type change.
Copy symbol_name_match_type fields.
(event_location_deleter::operator()): Adjust to LINESPEC_LOCATION
type change.
(event_location_to_string): Adjust to LINESPEC_LOCATION type
change. Handle "-qualfied".
(string_to_explicit_location): Handle "-qualified".
(string_to_event_location_basic): New symbol_name_match_type
parameter. Pass it down.
(string_to_event_location): Handle "-qualified".
* location.h (struct linespec_location): New.
(explicit_location::func_name_match_type): New field.
(new_linespec_location): Now returns a const linespec_location *.
(string_to_event_location_basic): New symbol_name_match_type
parameter.
(explicit_completion_info::saw_explicit_location_option): New
field.
* mi/mi-cmd-break.c (mi_cmd_break_insert_1): Adjust to pass a
symbol_name_match_type to new_linespec_location.
* python/py-breakpoint.c (bppy_init): Likewise.
* python/python.c (gdbpy_decode_line): Likewise.
gdb/testsuite/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* gdb.base/langs.exp: Use -qualified.
* gdb.cp/meth-typedefs.exp: Use -qualified, and add tests without
it.
* gdb.cp/namespace.exp: Use -qualified.
* gdb.linespec/cpcompletion.exp (overload-2, fqn, fqn-2)
(overload-3, template-overload, template-ret-type, const-overload)
(const-overload-quoted, anon-ns, ambiguous-prefix): New
procedures.
(test_driver): Call them.
* gdb.cp/save-bp-qualified.cc: New.
* gdb.cp/save-bp-qualified.exp: New.
* gdb.linespec/explicit.exp: Test -qualified.
* lib/completion-support.exp (completion::explicit_opts_list): Add
"-qualified".
* lib/gdb.exp (gdb_breakpoint): Handle "qualified".
gdb/doc/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Linespec Locations): Document how "function" is
interpreted in C++ and Ada. Document "-qualified".
(Explicit Locations): Document how "-function" is interpreted in
C++ and Ada. Document "-qualified".
A following patch will add support for wild matching for C++ symbols,
making completing on "b push_ba" on a C++ program complete to
std::vector<...>::push_back, std::string::push_back etc., like:
(gdb) b push_ba[TAB]
std::vector<...>::push_back(....)
std::string<...>::push_back(....)
Currently, we compute the "lowest common denominator" between all
completion candidates (what the input line is adjusted to) as the
common prefix of all matches. That's problematic with wild matching
as above, as then we'd end up with TAB changing the input line to
"b std::", losing the original input, like:
(gdb) b push_ba[TAB]
std::vector<...>::push_back(....)
std::string<...>::push_back(....)
(gdb) b std::
while obviously we'd want it to adjust itself to "b push_back(" instead:
(gdb) b push_ba[TAB]
std::vector<...>::push_back(....)
std::string<...>::push_back(....)
(gdb) b push_back(
This patch adds the core code necessary to support this, though
nothing really makes use of it yet in this patch.
gdb/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* ada-lang.c (ada_lookup_name_info::matches): Change type of
parameter from completion_match to completion_match_result.
Adjust.
(do_wild_match, do_full_match, ada_symbol_name_matches): Likewise.
* completer.c (completion_tracker::maybe_add_completion): Add
match_for_lcd parameter and use it.
(completion_tracker::add_completion): Likewise.
* completer.h (class completion_match_for_lcd): New class.
(completion_match_result::match_for_lcd): New field.
(completion_match_result::set_match): New method.
(completion_tracker): Add comments.
(completion_tracker::add_completion): Add match_for_lcd parameter.
(completion_tracker::reset_completion_match_result): Reset
match_for_lcd too.
(completion_tracker::maybe_add_completion): Add match_for_lcd
parameter.
(completion_tracker::m_lowest_common_denominator_unique): Extend
comments.
* cp-support.c (cp_symbol_name_matches_1)
(cp_fq_symbol_name_matches): Change type of parameter from
completion_match to completion_match_result. Adjust.
* language.c (default_symbol_name_matcher): Change type of
parameter from completion_match to completion_match_result.
Adjust.
* language.h (completion_match_for_lcd): Forward declare.
(default_symbol_name_matcher): Change type of parameter from
completion_match to completion_match_result.
* symtab.c (compare_symbol_name): Adjust.
(completion_list_add_name): Pass the match_for_lcd to the tracker.
* symtab.h (ada_lookup_name_info::matches): Change type of
parameter from completion_match to completion_match_result.
(symbol_name_matcher_ftype): Likewise, and update comments.
The recent-ish commit e5f25bc5d6 ('Fix "list ambiguous_variable"')
caused a serious regression on PPC64. See
<https://sourceware.org/ml/gdb-patches/2017-11/msg00666.html>.
Basically, after that patch, GDB sets breakpoints in function
descriptors instead of where the descriptors point to, which is
incorrect.
The problem is that GDB now only runs a minsym's address through
gdbarch_convert_from_func_ptr_addr if msymbol_is_text returns true.
However, if the symbol points to a function descriptor,
msymbol_is_text is false since function descriptors are in fact
outside the text section.
The fix is to also run a non-text address through
gdbarch_convert_from_func_ptr_addr, and if that detects that it was
indeed a function descriptor, treat the resulting address as a
function.
While implementing that directly in linespec.c:minsym_found (where the
bad msymbol_is_text check is) fixes the issue, I noticed that
linespec.c:add_minsym has some code that also basically needs to do
the same checks, however it's implemented differently. Also,
add_minsym is calling find_pc_sect_line on non-function symbols, which
also doesn't look right.
So I introduced msymbol_is_function, so that we have a simple place to
consider minsyms and function descriptors.
And then, the only other use of msymbol_is_text is in
find_function_alias_target, which turns out to also be incorrect.
Changing that one to use msymbol_is_function, i.e., to consider
function descriptors too fixes (on PPC64):
-FAIL: gdb.base/symbol-alias.exp: p func_alias
-FAIL: gdb.base/symbol-alias.exp: p *func_alias()
+PASS: gdb.base/symbol-alias.exp: p func_alias
+PASS: gdb.base/symbol-alias.exp: p *func_alias()
And then after that, msymbol_is_text is no longer used anywhere, so it
can be removed.
Tested on x86_64 GNU/Linux, no regressions. Tested on PPC64 GNU/Linux
and results compared to a testrun of e5f25bc5d6db^ (before the
offending commit), also no regressions. (there's a couple new FAILs
and some new symbol name matching unit tests are crashing, but that
looks unrelated).
gdb/ChangeLog:
2017-11-29 Pedro Alves <palves@redhat.com>
* linespec.c (minsym_found, add_minsym): Use msymbol_is_function.
* minsyms.c (msymbol_is_text): Delete.
(msymbol_is_function): New function.
* minsyms.h (msymbol_is_text): Delete.
(msymbol_is_function): New declaration.
* symtab.c (find_function_alias_target): Use msymbol_is_function.
Joel pointed out that gdb snapshots were broken by my Makefile patch
series. The bug is that rmdir in distclean was failing, because the
directory did not exist. This fixes the bug by only invoking rmdir when
the directory exists.
Tested using "src-release.sh gdb".
2017-11-29 Tom Tromey <tom@tromey.com>
* Makefile.in (distclean): Handle the case where rmdir fails.
This updates the usage text for the add-symbol-file, symbol-file, and
load commands.
gdb/ChangeLog
2017-11-29 Tom Tromey <tom@tromey.com>
* symfile.c (_initialize_symfile): Update usage text for
add-symbol-file, symbol-file, load.
This patch updates add-symbol-file help and error text.
It changes add-symbol-file to throw an exception if "-s" is seen but
not all of the arguments are given. Previously this was silently
ignored.
It changes the unrecognized argument message to more clearly state
what went wrong.
Finally, it updates the usage line in the help text to follow GNU
style regarding "metasyntactic variables"; a change I believe should
be made to all gdb help messages.
gdb/ChangeLog
2017-11-29 Tom Tromey <tom@tromey.com>
* symfile.c (add_symbol_file_command): Error if some arguments to
-s are missing. Change unrecognized-argument error message.
(_initialize_symfile): Fix usage text for add-symbol-file.
gdb/testsuite/ChangeLog
2017-11-29 Tom Tromey <tom@tromey.com>
* gdb.base/relocate.exp: Update invalid argument test.
Add new tests for invalid arguments.
As pointed out by Pedro Alves, psymtab-parameter testcase rely on the
return type being long. This patch revert the changes made in
f106e10e5e and change psymtab-parameter.cc
to return 0 long instead.
2017-11-29 Thomas Preud'homme <thomas.preudhomme@arm.com>
gdb/testsuite/
* gdb.cp/psymtab-parameter.cc (func): Change return type back to long.
Return 0 as a long.
* gdb.cp/psymtab-parameter.exp: Change func's return type back to long.
The following tests are marked untested with latest GCC due to a warning
being emitted for a mismatch between their return type and what the lack
of return statement:
* gdb.cp/breakpoint.exp
* gdb.cp/psymtab-parameter.exp
* gdb.cp/shadow.exp
This patch fix the return type to match the function definitions.
2017-11-29 Thomas Preud'homme <thomas.preudhomme@arm.com>
gdb/testsuite/
* gdb.cp/breakpoint.cc (bar): Set return type to void.
* gdb.cp/psymtab-parameter.cc (func): Likewise.
* gdb.cp/psymtab-parameter.exp: Update comment regarding prototype of
func ().
* gdb.cp/shadow.cc (B.func): Return 0.
This removes REMOTE_OBS from the Makefile. It is no longer needed, as
remote support is always built into gdb. The relevant sources are now
added to COMMON_SFILES, where they are treated like other ordinary
sources.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (REMOTE_OBS): Remove.
(SFILES): Remove remote sources.
(COMMON_SFILES): Add remote sources.
(ALLDEPFILES): Remove dcache.c.
Move the object files corresponding to target/*.c to the target
subdirectory in the build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_TARGET_SRCS, SUBDIR_TARGET_OBS): New
variables.
(SFILES): Use SUBDIR_TARGET_SRCS.
(COMMON_OBS): Use SUBDIR_TARGET_OBS. Remove waitstatus.o.
(CONFIG_SRC_SUBDIR): Add target.
(%.o): Remove target rule.
While working on the previous patch, I found a few .o files whose
corresponding .c file was not mentioned in Makefile.in. This patch
fixes the problem. I pulled this out separately to make it simpler to
review.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (COMMON_OBS): Remove filename-seen-cache.o,
registry.o, thread-fsm.o, debug.o.
(COMMON_SFILES): Add filename-seen-cache.c, registry.c,
thread-fsm.c, debug.c.
This introduces a new COMMON_SFILES variable, and then defines some of
COMMON_OBS in terms of this new variable. This simpifies adding a new
ordinary source file.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (COMMON_SFILES): New.
(SFILES): Move some entries to COMMON_SFILES.
(COMMON_OBS): Use COMMON_SFILES.
Change YYOBJ to be defined in terms of YYFILES.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (YYFILES): Update comment.
(YYOBJ): Redefine.
Move the object files corresponding to python/*.c to the python
subdirectory in the build tree.
Because special CFLAGS are passed just to Python compilations, this
patch also required the addition of a pattern rule to update
INTERNAL_CFLAGS for here.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_PYTHON_OBS): Redefine.
(CONFIG_SRC_SUBDIR): Add python.
(%.o): Remove python rule.
(python/%.o): New rule.
* configure: Rebuild.
* configure.ac (CONFIG_OBS): Refer to python/python.o
Move the object files corresponding to guile/*.c to the guile
subdirectory in the build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* configure: Rebuild.
* configure.ac (CONFIG_OBS): Refer to guile/guile.o.
* Makefile.in (SUBDIR_GUILE_OBS): Redefine.
(CONFIG_SRC_SUBDIR): Add guile.
(%.o): Remove guile rule.
Move the object files corresponding to unittests/*.c to the unittests
subdirectory in the build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_UNITTESTS_OBS): Redefine.
(%.o): Remove unittests rule.
(CONFIG_SRC_SUBDIR): Add unittests.
Move the object files corresponding to tui/*.c to the tui subdirectory
in the build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_TUI_OBS): Redefine.
(CONFIG_SRC_SUBDIR): Add tui.
(%.o): Remove tui rule.
Move the object files corresponding to compile/*.c to the compile
subdirectory in the build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_GCC_COMPILE_OBS): Redefine.
(%.o): Remove compile rule.
(CONFIG_SRC_SUBDIR): Add compile.
Move object files corresponding to mi/*.c to a subdirectory in the
build tree.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_MI_OBS): Redefine.
(%.o): Remove mi rule.
(CONFIG_SRC_SUBDIR): Add mi.
(COMMON_OBS): Use mi/mi-common.o
Following the "arch" move, this moves the object files corresponding
to the cli/*.c source files to the "cli" build directory.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* Makefile.in (SUBDIR_CLI_OBS): Redefine.
(%.o): Remove cli rule.
(CONFIG_SRC_SUBDIR): Add cli.
This implements a simpler way to make the "arch" build directory --
namely, now it is done as an order-only dependency in the Makefile,
rather than being created when config.status is run. This simpler
because it means that the build directories can be changed without
re-running autoconf.
ChangeLog
2017-11-27 Tom Tromey <tom@tromey.com>
* configure.ac (CONFIG_SRC_SUBDIR): Don't subst.
* configure: Rebuild.
* Makefile.in (CONFIG_SRC_SUBDIR): Redefine.
(CONFIG_DEP_SUBDIR): New variable.
(%.o): Add order-only dependency.
($(CONFIG_DEP_SUBDIR)): New target.
The following patch introduced a new feature related to Ada exception
catchpoints:
commit e547c119d0
Author: Joel Brobecker <brobecker@adacore.com>
Date: Fri Nov 24 17:09:42 2017 -0500
Subject: (Ada) provide the exception message when hitting an exception catchpoint
Unfortunately, the patch left 2 errors in gdb.ada/mi_catch_ex.exp,
both inside the "continue_to_exception" function:
1. The exception message on the console can include the exception
message, and thus this patch adjust the expected output in
the corresponding gdb_expect call to allow it;
to allow it.
2. There was a TCL syntax confusion in "$exception_name(..."
that caused TCL to evaluate "exception_name as an array,
rather than as a variable. This patch fixes this by escaping
the '(' (and the corresponding closing parenthesis, for
consistency).
gdb/testsuite/ChangeLog:
* gdb.ada/mi_catch_ex.exp (continue_to_exception): Adjust
expected output in gdb_expect call to allow the exception
message to be present as well. Fix syntax confusion to avoid
TCL thinking that exception_name is an array.
Tested on x86_64-linux, with:
DejaGnu version 1.6
Expect version 5.45
Tcl version 8.6
This patch updates the `find` command help and docs description to show
how to search for not null terminated strings when current language's
strings includes it.
gdb/ChangeLog:
PR gdb/21945
* findcmd.c (_initialize_mem_search): Update find command help
text.
gdb/doc/ChangeLog:
PR gdb/21945
* gdb.texinfo (Search Memory): Update description and example
about how to search a string without NULL terminator.
While playing with valgrind, I noticed that with Python 3, the progname
variable in do_start_initialization is not being freed (concat returns a
malloc'ed string). This patch uses unique_xmalloc_ptr to manage it.
With Python 2, we pass progname it directly to Py_SetProgramName, so it
should not be freed. We therefore release it before passing it.
gdb/ChangeLog:
* python/python.c (do_start_initialization): Change progname
type to gdb::unique_xmalloc_ptr. Release the pointer when using
Python 2.
This changes maybe_disable_address_space_randomization to be an RAII
class, rather than having it return a cleanup.
Regression tested by the buildbot.
ChangeLog
2017-11-26 Tom Tromey <tom@tromey.com>
* nat/linux-personality.h (class
maybe_disable_address_space_randomization): New class.
(maybe_disable_address_space_randomization): Don't declare
function.
* nat/linux-personality.c (restore_personality)
(make_disable_asr_cleanup): Remove.
(maybe_disable_address_space_randomization): Now a constructor.
(~maybe_disable_address_space_randomization): New destructor.
* linux-nat.c (linux_nat_create_inferior): Update.
gdbserver/ChangeLog
2017-11-26 Tom Tromey <tom@tromey.com>
* linux-low.c (linux_create_inferior): Update.
This removes a cleanup from gcore.c, replacing it with
unique_xmalloc_ptr.
Regression tested by the buildbot.
ChangeLog
2017-11-26 Tom Tromey <tom@tromey.com>
* gcore.c (write_gcore_file_1): Use gdb::unique_xmalloc_ptr.
The SPU-specific test cases were not modified to use standard_output_file
and therefore all were no longer being executed. Fixing this exposed a
few other bugs in spu-info noticed by using a more recent compiler, which
are also fixed here.
gdb/testsuite/ChangeLog:
2017-11-26 Ulrich Weigand <uweigand@de.ibm.com>
* gdb.arch/spu-info.c: Include <unistd.h>.
(do_signal_test): Fix broken calls to write.
* gdb.arch/spu-info.exp: Use prepare_for_testing.
Fix checks for empty mailboxes. Update signal tests for corrected
do_signal_test routine. Allow nonzero event status.
Switching spu_software_single_step to use a regcache instead of a frame:
https://sourceware.org/ml/gdb-patches/2016-11/msg00355.html
cause a serious regression to SPU single-stepping.
There were two separate problems:
- SPU_LSLR_REGNUM is a pseudo register, so we must use the "cooked"
regcache methods instead of the "raw" ones to access it.
- When accessing a branch target register, we must only use the first
four bytes of the 16-byte vector register. This was done automatically
by the frame routines, but not by the regcache routines.
gdb/ChangeLog:
2017-11-26 Ulrich Weigand <uweigand@de.ibm.com>
* spu-tdep.c (spu_software_single_step): Access SPU_LSLR_REGNUM as
"cooked" register. Access only first four bytes of branch target
registers.
Pedro has kindly pointed out that
gdb.arch/amd64-stap-optional-prefix.exp was failing after my
C++-ification patches touching the probe interface. The failure is
kind of cryptic:
77 break -pstap bar
78 Breakpoint 3 at 0x40048d
79 (gdb) PASS: gdb.arch/amd64-stap-optional-prefix.exp: bar: break -pstap bar
80 continue
81 Continuing.
82
83 Program received signal SIGILL, Illegal instruction.
84 main () at amd64-stap-optional-prefix.S:26
85 26 STAP_PROBE1(probe, foo, (%rsp))
It took me a while to figure out where this SIGILL is coming from.
Initially I thought it was something related to writing registers to
the inferior when dealing with probe arguments, but I discarded this
since the arguments were not touching any registers.
In the end, this was a mistake that was introduced during the review
process of the patch. When setting/clearing a SystemTap probe's
semaphore, the code was using 'm_address' (which refers the probe's
address) instead of 'm_sem_addr' (which refers to the semaphore's
address). This caused GDB to write a bogus value in the wrong memory
position, which in turn caused the SIGILL.
I am pushing this patch to correct the mistake.
On a side note: I told Pedro that the BuildBot hadn't caught the
failure during my try build, and for a moment there was a suspicion
that the BuildBot might be at fault here. However, I investigate this
and noticed that I only did one try build, with a patch that was
correctly using 'm_sem_addr' where applicable, and therefore no
failure should have happened indeed. I probably should have requested
another try build after addressing the review's comments, but they
were mostly basic and I didn't think it was needed. Oh, well.
2017-11-25 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/22491
* stap-probe.c (relocate_address): New function.
(stap_probe::get_relocated_address): Use 'relocate_address'.
(stap_probe::set_semaphore): Use 'relocate_address' and pass
'm_sem_addr'.
(stap_probe::clear_semaphore): Likewise.
The support for setting breakpoint in functions with ABI tags patch
will add a use of SYMBOL_HASH_NEXT in cp-support.c, which fails to
compile with:
src/gdb/cp-support.c:38:0:
src/gdb/cp-support.c: In function ‘unsigned int cp_search_name_hash(const char*)’:
src/gdb/../include/safe-ctype.h:148:20: error: ‘do_not_use_tolower_with_safe_ctype’ was not declared in this scope
#define tolower(c) do_not_use_tolower_with_safe_ctype
^
src/gdb/minsyms.h:174:18: note: in expansion of macro ‘tolower’
((hash) * 67 + tolower ((unsigned char) (c)) - 113)
^
src/gdb/cp-support.c:1677:14: note: in expansion of macro ‘SYMBOL_HASH_NEXT’
hash = SYMBOL_HASH_NEXT (hash, *string);
^
This fixes the problem before it happens.
I was somewhat worried about whether this might have an impact with
languages that are case insensitive, but I convinced myself that it
doesn't. As bonus, this improves GDB's minsym interning performance a
bit (3%-10%). See
<https://sourceware.org/ml/gdb/2017-11/msg00021.html>.
gdb/ChangeLog:
2017-11-25 Pedro Alves <palves@redhat.com>
* dictionary.c: Include "safe-ctype.h".
* minsyms.c: Include "safe-ctype.h".
* minsyms.c (SYMBOL_HASH_NEXT): Use TOLOWER instead of tolower.
Earlier while working on the big completer rework series, I managed to
break
(gdb) [TAB]
locally, and make GDB crash, but only notice a few weeks down the
road, because we have no test for that...
I also noticed that:
(gdb) [TAB]
didn't work (didn't show all commands as matches), even though
entering a command with leading whitespace works:
(gdb) help
This commit fixes the latter and adds a testcase that covers both
issues.
The gdb.base/completion.exp change is necessary because the new test
has a file name that also starts with "gdb.base/complet", making that
particular test ambiguous. Adding another letter disambiguates.
gdb/ChangeLog:
2017-11-25 Pedro Alves <palves@redhat.com>
* completer.c (complete_line_internal_1): Skip spaces until the
start of the command.
gdb/testsuite/ChangeLog:
2017-11-25 Pedro Alves <palves@redhat.com>
* gdb.base/complete-empty.exp: New file.
* gdb.base/completion.exp: Adjust.
This exercises the special handling C++ operators require in several
places in the linespec parser, both the linespec and explicit location
completers, symbol lookup, etc. Particularly, makes sure all that
works without quoting.
Note that despite the apparent smallish size, this adds thousands of
tests to the testsuite, due to combination explosion (linespecs,
explicit locations, tab completion, complete command, completion at
different points in each function, etc.)
Grows the gdb.linespec/ tests like this:
-# of expected passes 3464
+# of expected passes 7823
gdb/testsuite/ChangeLog:
2017-11-25 Pedro Alves <palves@redhat.com>
* gdb.linespec/cpls-ops.cc: New file.
* gdb.linespec/cpls-ops.exp: New file.
* lib/completion-support.exp (test_complete_prefix_range_re): New,
factored out from ...
(test_complete_prefix_range): ... this.
Exercises all sorts of aspects fixed by previous patches, going back a
few months.
- Exercises label completion, linespecs and explicit locations.
- Exercises both quoting vs non-quoting, source filenames, function
names, labels, with both linespecs and explicit locations.
- Tests corner cases around not-quoting function names, and
whitespace and/and completing inside a parameter or template
argument list, anonymous namespace awareness, etc.
E.g.,
"break foo<[TAB]" -> "break foo<int>()"
"break bar ( int[TAB]" -> "break bar ( int)
"break ( anon" -> "break ( anonymous namespace)::func()"
"b cfunc() [tab]" -> "b cfunc() const"
"b rettype templfunc[tab]" -> "b rettype templfunc<bar>()"
... and others.
- Tests the "b source.c[TAB] -> b source.cc:" feature. I.e., colon
auto-appending.
- Exercises corner cases around C++ "operator<" / "operator<<".
(Much more extensive C++ operator completion/linespec handling in a
separate patch.)
- Exercises both tab completion and "complete" command completion,
using routines that handle it automatically, to ensure no test
forgets either mode.
- Many of the completion tests test completion at at prefix of a
given tricky name, to make sure all corner cases are covered.
E.g., completing before, at and after ":", "(", "<".
- Exercises "keyword" completion. I.e., "b function() [TAB]"
displaying "if task thread" as completion match list. Likewise for
display explicit location options matches at the appropriate
points.
- Ensures that the completer finds the same breakpoint locations that
setting a breakpoint finds.
- Tests that linespec/location completion doesn't find data symbols.
- Tests that expression completion still kicks in after a
linespec/location keyword. I.e., this:
"b function () if global1 + global[TAB]"
knows that after "if", you're completing on an expression, and thus
breaks words after "if" as an expression and matches on "global" as
a data symbol.
- Adds common routines to help with all the above, to be used by
multiple completion and linespec/location test cases.
- More...
Grows the gdb.linespec/ tests like this:
-# of expected passes 573
+# of expected passes 3464
gdb/testsuite/ChangeLog:
2017-11-24 Pedro Alves <palves@redhat.com>
* gdb.linespec/cpcompletion.exp: New file.
* gdb.linespec/cpls-hyphen.cc: New file.
* gdb.linespec/cpls.cc: New file.
* gdb.linespec/cpls2.cc: New file.
* gdb.linespec/explicit.exp: Load completion-support.exp. Adjust
test to use test_gdb_complete_unique. Add label completion,
keyword completion and explicit location completion tests.
* lib/completion-support.exp: New file.
currently "b func tion" manages to set a breakpoint at "function" !
All these years I had never noticed this, but now that the linespec
completer actually works, this easily happens by accident, with:
"b func t<tab>"
expecting to get "thread", but getting instead:
"b func tion"
...
Also, this:
"b rettypefunc<int>"
manages to set a breakpoint on "rettype func<int>()".
These things happen due to strcmp_iw "magic".
Fix it by teaching strcmp_iw about when can it skip whitespace. This
required handling user-defined operators, and scope operators,
complicating the code a bit, unfortunately. I added unit tests for
all the corner cases I stumbled on, as I was developing this, and then
in the end wrote a testsuite testcase covering many of the same things
and more (to be added later).
gdb/ChangeLog:
2017-11-24 Pedro Alves <palves@redhat.com>
* cp-support.c (cp_symbol_name_matches_1): New, factored out from
cp_fq_symbol_name_matches. Pass language_cplus to
strncmp_with_mode.
(cp_fq_symbol_name_matches): Call cp_symbol_name_matches_1.
(selftests::test_cp_symbol_name_cmp): New.
(_initialize_cp_support): Register "cp_symbol_name_matches"
selftests.
* language.c (default_symbol_name_matcher): Pass language_minimal
to strncmp_iw_with_mode.
* utils.c: Include "cp-support.h" and <algorithm>.
(valid_identifier_name_char, cp_skip_operator_token, skip_ws)
(cp_is_operator): New functions.
(strncmp_iw_with_mode): Use them. Add language parameter. Don't
skip whitespace in the symbol name when the lookup name doesn't
have spaces, and vice versa.
(strncmp_iw, strcmp_iw): Pass language to strncmp_iw_with_mode.
* utils.h (strncmp_iw_with_mode): Add language parameter.
This patch enhances the debugger to print the exception message, when
available, as part of an exception catchpoint hit notification (both
GDB/CLI and GDB/MI). For instance, with the following code...
procedure A is
begin
raise Constraint_Error with "hello world";
end A;
... instead of printing...
Catchpoint 1, CONSTRAINT_ERROR at 0x000000000040245c in a () at a.adb:3
... it now prints:
Catchpoint 1, CONSTRAINT_ERROR (hello world) at 0x000000000040245c in a ()
^^^^^^^^^^^^^
This enhancement requires runtime support. If not present, the debugger
just behaves as before.
In GDB/MI mode, if the exception message is available, it is provided
as an extra field named "exception-message" in the catchpoint notification:
*stopped,bkptno="1",[...],exception-name="CONSTRAINT_ERROR",
exception-message="hello world",[...]
gdb/ChangeLog:
* ada-lang.c (ada_exception_message_1, ada_exception_message):
New functions.
(print_it_exception): If available, display the exception
message as well.
* NEWS: Document new feature.
gdb/doc/ChangeLog:
* gdb.texinfo (GDB/MI Ada Exception Information): Document
new "exception-message" field.
gdb/testsuite/ChangeLog:
* gdb.ada/catch_ex.exp, gdb.ada/mi_catch_ex.exp,
gdb.ada/mi_ex_cond.exp: Accept optional exception message in
when hitting an exception catchpoint.
While writing a unit test for parse_memory_map, I tried to validate my
test input against gdb-memory-map.dtd, and found a few problems with it.
This doesn't influence how gdb parses it (AFAIK it doesn't use the
linked dtd), but if you edit the xml file in an editor that supports
dtds, you'll get plenty of errors.
- The <memory-map> element accepts exactly one <memory> OR <property>
as a child. This is a problem because you can't have multiple
<memory> elements and you shouldn't be able to have <property> elements
as direct children of <memory-map>.
- The <memory> element wants exactly one <property> child. This is
wrong, since you could have zero or more (even though we only
support one kind of property currently).
- I have no idea wht the device attribute of <memory> is, GDB doesn't
read that. I searched back in time a bit but couldn't find a trace
of it.
I took the opportunity to tighten what is accepted as a value of the
memory type and property name attributes. We currently accept any
string, but we can restrict them to the values GDB really accepts (and
which are documented).
AFAIK, this "file" only exists in the documentation, in gdb.texinfo, so
this is what I modified. However, it's also available at
http://sourceware.org/gdb/gdb-memory-map.dtd. This one should be
updated too, but I don't know how that should be done.
gdb/doc/ChangeLog:
* gdb.texinfo (Memory Map Format): Update gdb-memory-map.dtd.
Ulrich Weigand
Simon Marchi
Pedro Alves
Rainer Orth
John Baldwin
Joel Brobecker
Tom Tromey
Phil Muldoon
Thomas Preud'homme
Dominik Czarnota
Simon Marchi
Sergio Durigan Junior