* trad-core.c: Don't include <sys/file.h>.
* i386linux.h: Include <sys/file.h>.
* coff-m68k-un.c: new file to handle names with underscores on
svr3 machines.
* coff-m68k.c (m68k_rtype2howto): added #ifdef ONLY_DECLARE_RELOCS
to not duplicate the function in the executable.
(TARGET_SYM, TARGET_NAME, NAMES_HAVE_UNDERSCORE): new macros needed
by coff-m68k-un.c.
* coffcode.h (MC68KBCSMAGIC): case added.
* targets.c: Add m68kcoffun_vec.
* configure.host: added support for Bull dpx/2.
* config/dpx2.mh, hosts/dpx2.h: new files.
* Makefile.in: added target coff-m68k-un.
argument. Just let an indirect symbol point to the next symbol
without forcing the next symbol to be undefined. Changed all
callers.
* hp300hpux.c (slurp_symbol_table): Changed call to
translate_from_native_sym_flags.
* targets.c: Added hp300hpux_vec.
* Makefile.in (hp300hpux.o): Added dependencies.
Fri Jan 8 15:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
* bfd.c (struct _bfd): Added ecoff_tdata to tdata union.
* targets.c (enum target_flavour): Added bfd_target_ecoff_flavour.
* coff-msym.c: Use DEFUN for function definitons.
* coff-mips.c: Added code to read and print symbols, and to find
line numbers.
* Patches from Minh Tran-le <mtranle@paris.intellicorp.com>.
* configure.in (i386-*-isc*, i386-*-aix*): New targets.
* configure.host (i386-*-isc*, i386-*-aix*): New hosts.
* hosts/i386isc.h, config/i386isc.mh: New files for Interactive
Unix.
* hosts/i386aix.h, config/i386aix.mh: New files for AIX on PS/2.
* aix386-core.c: New file for handling core files on AIX on PS/2.
* targets.c: if AIX386_CORE, use aix386_core_vec.
* coffcode.h (coff_real_object_p): check for I386SVMAGIC as well
as I386MAGIC.
* aout-adobe.c: New file. So far, only reads a.out.adobe. FIXME.
* config/adobe.mt: Add.
* configure.in (*-adobe-* target): Add.
* targets.c (a_out_adobe_vec): Add.
* Makefile.in: add aout-adobe.c.
* configure.in: Put two dashes in all entries to be matched.
Add comments to remind people to do this.
Reorder all entries that match manufacturer names, to occur
last, so they will only be matched if no more specific match
occurs. Remove manufacturers `aout', `bout', `coff', and `elf'.
* targets.c, config/i960-bout.mt, hosts/*: added
HOST_BIG_ENDIAN_DEFAULT_VECTOR and
HOST_LITTLE_ENDIAN_DEFAULT_VECTOR because bout archive format
depends on the endianness of the host. Added #define
HOST_BIG_ENDIAN_P and #undef HOST_BIG_ENDIAN_P to a number of
configuration files in hosts/ (it was already in some).
Various changes to get linker working again for a.out:
* don't set/adjust section file positions or vmas more than once
* use correct page size and segment size when calculating them
* deal with some variations in a.out implementations
Tested on sun4 and sun4->sun3 so far, will be testing further but
needed to get wider exposure&testing. See ChangeLog for details.
Also:
* coffcode.h (coff_write_relocs): Write out swapped reloc, not
pre-swapped version.
* hosts/sparc.h (abort, exit): Hide these names if compiling with
gcc version 2, to avoid warnings.
* ieee.c: if some places where null pointers were used instead of &bfd_abs_section.
* configure.in: tandem target is st2000
* coff-m68k.c: rename static howto_table to global
m68kcoff_howto_table.
* bout.c: remove unnecessary abort
* configure.in: now h8 is a coff target
* cpu-h8300.c: fix various disassembly problems
* libcoff.h: took out some code which has been #0ed for a long
time.
* targets.c: added h8 coff
* coff-a29k.c, coff-i386.c, coff-i960.c, coff-m68k.c, coff-m88k.c
added new macro RTYPE2HOWTO to take a load of #ifdefs out of
coffcode.h
* coffcode.h: Started to change the way machine dependencies are
handled, from the nest of #ifdefs to macros defined in the
including coff-<foo>.c
* opncls.c (bfd_close_all_done). Added so that generative
programs like gas can close a bfd without causing bfd confusion.
* libbfd.h (changed becuase of protos)
* amdcoff.c: messed with the way that jmp displacements are
calcualated. This may not yet be totally correct.
* archive.c (coff_write_armap): rewrote the way that ranlibs are
written out.
* coffcode.h (fixup_symbol_value): now doesn't core dump if a non
abs symbol has no section (like a register symbol).
(coff_write_symbol) now zeros auxent before filling it up to help
with sensitive applications.
* libbfd.c (bfd_write_bigendian_4byte_int): added.
* bfd.c: Added macros to enable gas to swap coff records.
* coffcode.h: Make the coff_swap_*_out routines return the number
of bytes swapped, and cleaned up their prototypes.
* configure.in: Added ebmon/coff support
* ecoff.c: Changed null definitions of coff_swap_*_out to conform
to new prototypes
* targets.c: Added new entry points for coff swapping
* cpu-a29k.c, cpu-i386.c, cpu-m68k.c, cpu-mips.c, cpu-vax.c,
cpu-h8300.c, cpu-i960.c, cpu-m88k.c, cpu-sparc.c: added. These
files will eventually contain processor specific bits for bfd,
like strange relocation information and dis/assembly. So far only
the H8 has been even partially done. This work also ties in with
the change in handling architectures.
* aout-f1.h: (choose_reloc_size) now calls bfd_get_arch to
discover the architecture of the bfd. (sunos4_callback) calls the
function bfd_set_arch_mach rather than stuffing stuff directly
into the bfd. (sunos4_write_object_contents), changed names of
accessor functions.
* aoutx.h: (set_arch_mach) now calls bfd_default_set_arch_mach to
setup the environment.
* archive.c: (bfd_slurp_coff_armap) coff archives always have the
headers in big endian format, regardless of the endianess of the
host or target.
* archures.c: totally changed. Now an architecture is represented
with a pointer to an info structure rather than an enumerated type
and a long. The old info is available as two elements in the
structure. Future enhancements to architecure support will
involve pointers to methods being placed into the info structure.
* bfd.c: changed the definition of the bfd structure for the new
architecture stuff.
* bout.c: (b_out_set_arch_mach) changed to use the new
architecture mechanism.
* coffcode.h: (coff_set_arch_mach, coff_set_flags) changed to use
the new architecture mechanism.
* configure.in: added h8 stuff.
* ieee.c: too many changes to note. Now ieee files written with
bfd gas and ld can be read by gld and ieee only linkers and
simulators.
* libbfd.c, libbfd.h: changed prototype of bfd_write.
* newsos3.c: (newos3_callback) now calls bfd_set_arch_mach rather
than fixing the structure directly.
* oasys.c: (oasys_object_p) now calls bfd_default_set_arch_mach rather
than fixing the structure directly.
* opncls.c: (new_bfd) makes sure that bfd_init has been called
before opening a bfd.
* srec.c: (srec_set_arch_mach) now calls bfd_default_set_arch_mach
rather than fixing the structure directly.
* targets.c: (target_vector) now by defining SELECT_VECS (perhaps
in the t/hmake file) a user can select which backends they want
linked with bfd without changing the source.
* init.c: new, looks after initializing modules.
* howto.c: for future use, will allow an application to work out
what cookie to use as a handle on a relcoatio howto.
bfd.texinfo oasys.c opncls.c reloc.c srec.c: More documentation on
lint fixes.
* amdcoff.c bfd.texinfo Makefile.in : Folded in changes for amd
29k coff by David Wood (wood@lab.ultra.nyu.edu).
