This patch replaces tui_restore_gdbout (a cleaup function) with a use
of scoped_restore. This one is broken out into its own patch because
it might slightly change the behavior of gdb: it saves and restores
pagination_enabled, whereas the tui_restore_gdbout unconditionally set
pagination_enabled to 1; and I think this warrants closer review.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* tui/tui-regs.c (tui_restore_gdbout): Remove.
(tui_register_format): Use scoped_restore.
This patch reworks the whole completion machinery, and prepares it
for later enhancements.
Adds a new "completion_tracker" class that is meant to hold everything
about the state of the current completion operation.
This class now has the responsibility of tracking the list of
completion matches, and checking whether the max completions limit has
been reached. You can look at this as this patch starting out by
C++fying the existing "completion_tracker" in symtab.c (it's just an
htab_t typedef currently), moving it to completer.h/c, and then making
it a class/generalizing/enhancing it.
Unlike with the current tracking, completion_tracker now checks
whether the limit has been reached on each completion match list
insertion. This both simplifies the max-completions handling code
(maybe_add_completion_enum is gone, for example), and is a
prerequisite for follow up patches.
The current completion_tracker is only used for symbol completions,
and the symbol code gets at the current instance via globals. This
patch cleans that up by adding a completion_tracker reference to the
signature of the completion functions, and passing the tracker around
everywhere necessary.
Then, the patch changes how the completion match list is handed over
to readline. Currently, we're using the rl_completion_entry_function
readline entry point, and the patch switches to
rl_attempted_completion_function. A following patch will want to let
GDB itself decide the common completion prefix between all matches
(what readline calls the "lowest common denominator"), instead of
having readline compute it, and that's not possible with the
rl_completion_entry_function entry point. Also,
rl_attempted_completion_function lets GDB hand over the match list to
readline as an array in one go instead of passing down matches one by
one, so from that angle it's a nicer entry point anyway.
Lastly, the patch catches exceptions around the readline entry points,
because we can't let C++ exceptions cross readline. We handle that in
the readline input entry point, but the completion entry point isn't
guarded, so GDB can abort if completion throws. E.g., in current
master:
(gdb) b -function "fun<tab>
terminate called after throwing an instance of 'gdb_exception_RETURN_MASK_ERROR'
Aborted (core dumped)
This patch fixes that. This will be exercised in the new tests added
later on in the series.
gdb/ChangeLog:
2017-07-17 Pedro Alves <palves@redhat.com>
* ada-lang.c (symbol_completion_match): Adjust comments.
(symbol_completion_add): Replace vector parameter with
completion_tracker parameter. Use it.
(ada_make_symbol_completion_list): Rename to...
(ada_collect_symbol_completion_matches): ... this. Add
completion_tracker parameter and use it.
(ada_language_defn): Adjust.
* break-catch-syscall.c (catch_syscall_completer): Adjust
prototype and work with completion_tracker instead of VEC.
* breakpoint.c (condition_completer): Adjust prototype and work
with completion_tracker instead of VEC.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Adjust to renames.
* cli/cli-cmds.c (complete_command): Rework using
completion_tracker. Catch exceptions when completing.
* cli/cli-decode.c (integer_unlimited_completer)
(complete_on_cmdlist, complete_on_enum): Adjust prototype and work
with completion_tracker instead of VEC.
* command.h (struct completion_tracker): Forward declare.
(completer_ftype, completer_handle_brkchars_ftype): Change
types.
(complete_on_cmdlist, complete_on_enum): Adjust.
* completer.c: Include <algorithm>.
(struct gdb_completer_state): New.
(current_completion): New global.
(readline_line_completion_function): Delete.
(noop_completer, filename_completer)
(filename_completer_handle_brkchars, complete_files_symbols)
(linespec_location_completer): Adjust to work with a
completion_tracker instead of a VEC.
(string_or_empty): New.
(collect_explicit_location_matches): Adjust to work with a
completion_tracker instead of a VEC.
(explicit_location_completer): Rename to ...
(complete_explicit_location): ... this and adjust to work with a
completion_tracker instead of a VEC.
(location_completer): Adjust to work with a completion_tracker
instead of a VEC.
(add_struct_fields): Adjust to work with a completion_list instead
of VEC.
(expression_completer): Rename to ...
(complete_expression): ... this and adjust to work with a
completion_tracker instead of a VEC. Use complete_files_symbols.
(expression_completer): Reimplement on top of complete_expression.
(symbol_completer): Adjust to work with a completion_tracker
instead of a VEC.
(enum complete_line_internal_reason): Add describing comments.
(complete_line_internal_normal_command): Adjust to work with a
completion_tracker instead of a VEC.
(complete_line_internal): Rename to ...
(complete_line_internal_1): ... this and adjust to work with a
completion_tracker instead of a VEC. Assert TEXT is NULL in the
handle_brkchars phase.
(new_completion_tracker): Delete.
(complete_line_internal): Reimplement as TRY/CATCH wrapper around
complete_line_internal_1.
(free_completion_tracker): Delete.
(INITIAL_COMPLETION_HTAB_SIZE): New.
(completion_tracker::completion_tracker)
(completion_tracker::~completion_tracker): New.
(maybe_add_completion): Delete.
(completion_tracker::maybe_add_completion)
(completion_tracker::add_completion)
(completion_tracker::add_completions): New.
(throw_max_completions_reached_error): Delete.
(complete_line): Adjust to work with a completion_tracker instead
of a VEC. Don't create a completion_tracker_t or check for max
completions here.
(command_completer, command_completer_handle_brkchars)
(signal_completer, reg_or_group_completer_1)
(reg_or_group_completer, default_completer_handle_brkchars):
Adjust to work with a completion_tracker.
(gdb_completion_word_break_characters_throw): New.
(gdb_completion_word_break_characters): Reimplement.
(line_completion_function): Delete.
(completion_tracker::recompute_lowest_common_denominator)
(expand_preserving_ws)
(completion_tracker::build_completion_result)
(completion_result::completion_result)
(completion_result::completion_result)
(completion_result::~completion_result)
(completion_result::completion_result)
(completion_result::release_match_list, compare_cstrings)
(completion_result::sort_match_list)
(completion_result::reset_match_list)
(gdb_rl_attempted_completion_function_throw)
(gdb_rl_attempted_completion_function): New.
* completer.h (completion_list, struct completion_result)
(class completion_tracker): New.
(complete_line): Add completion_tracker parameter.
(readline_line_completion_function): Delete.
(gdb_rl_attempted_completion_function): New.
(noop_completer, filename_completer, expression_completer)
(location_completer, symbol_completer, command_completer)
(signal_completer, reg_or_group_completer): Update prototypes.
(completion_tracker_t, new_completion_tracker)
(make_cleanup_free_completion_tracker): Delete.
(enum maybe_add_completion_enum): Delete.
(maybe_add_completion): Delete.
(throw_max_completions_reached_error): Delete.
* corefile.c (complete_set_gnutarget): Adjust to work with a
completion_tracker instead of a VEC.
* cp-abi.c (cp_abi_completer): Adjust to work with a
completion_tracker instead of a VEC.
* d-lang.c (d_language_defn): Adjust.
* disasm.c (disassembler_options_completer): Adjust to work with a
completion_tracker instead of a VEC.
* f-lang.c (f_make_symbol_completion_list): Rename to ...
(f_collect_symbol_completion_matches): ... this. Adjust to work
with a completion_tracker instead of a VEC.
(f_language_defn): Adjust.
* go-lang.c (go_language_defn): Adjust.
* guile/scm-cmd.c (cmdscm_add_completion, cmdscm_completer):
Adjust to work with a completion_tracker instead of a VEC.
* infrun.c (handle_completer): Likewise.
* interps.c (interpreter_completer): Likewise.
* interps.h (interpreter_completer): Likewise.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Adjust.
* language.h (language_defn::la_make_symbol_completion_list):
Rename to ...
(language_defn::la_collect_symbol_completion_matches): ... this
and adjust to work with a completion_tracker instead of a VEC.
* m2-lang.c (m2_language_defn): Adjust.
* objc-lang.c (objc_language_defn): Adjust.
* opencl-lang.c (opencl_language_defn): Adjust.
* p-lang.c (pascal_language_defn): Adjust.
* python/py-cmd.c (cmdpy_completer_helper): Handle NULL word.
(cmdpy_completer_handle_brkchars, cmdpy_completer): Adjust to work
with a completion_tracker.
* rust-lang.c (rust_language_defn): Adjust.
* symtab.c (free_completion_list, do_free_completion_list)
(return_val, completion_tracker): Delete.
(completion_list_add_name, completion_list_add_symbol)
(completion_list_add_msymbol, completion_list_objc_symbol)
(completion_list_add_fields, add_symtab_completions): Add
completion_tracker parameter and use it.
(default_make_symbol_completion_list_break_on_1): Rename to...
(default_collect_symbol_completion_matches_break_on): ... this.
Add completion_tracker parameter and use it instead of allocating
a completion tracker here.
(default_make_symbol_completion_list_break_on): Delete old
implementation.
(default_make_symbol_completion_list): Delete.
(default_collect_symbol_completion_matches): New.
(make_symbol_completion_list): Delete.
(collect_symbol_completion_matches): New.
(make_symbol_completion_type): Rename to ...
(collect_symbol_completion_matches_type): ... this. Add
completion_tracker parameter and use it instead of VEC.
(make_file_symbol_completion_list_1): Rename to...
(collect_file_symbol_completion_matches): ... this. Add
completion_tracker parameter and use it instead of VEC.
(make_file_symbol_completion_list): Delete.
(add_filename_to_list): Use completion_list instead of a VEC.
(add_partial_filename_data::list): Now a completion_list.
(make_source_files_completion_list): Work with a completion_list
instead of a VEC.
* symtab.h: Include "completer.h".
(default_make_symbol_completion_list_break_on)
(default_make_symbol_completion_list, make_symbol_completion_list)
(make_symbol_completion_type, make_file_symbol_completion_list)
(make_source_files_completion_list): Delete.
(default_collect_symbol_completion_matches_break_on)
(default_collect_symbol_completion_matches)
(collect_symbol_completion_matches)
(collect_symbol_completion_matches_type)
(collect_file_symbol_completion_matches)
(make_source_files_completion_list): New.
* top.c (init_main): Don't install a rl_completion_entry_function
hook. Install a rl_attempted_completion_function hook instead.
* tui/tui-layout.c (layout_completer): Adjust to work with a
completion_tracker.
* tui/tui-regs.c (tui_reggroup_completer):
* tui/tui-win.c (window_name_completer, focus_completer)
(winheight_completer): Adjust to work with a completion_tracker.
* value.c: Include "completer.h".
(complete_internalvar): Adjust to work with a completion_tracker.
* value.h (complete_internalvar): Likewise.
Commit d7e747318f ("Eliminate make_cleanup_ui_file_delete / make
ui_file a class hierarchy") introduced a problem when using "layout
regs", that leads gdb to crash when issuing:
./gdb ./a.out -ex 'layout regs' -ex start
From the backtrace, it's caused by this 'delete' on tui_restore_gdbout():
(gdb) bt
#0 0x00007ffff6b962b2 in free () from /lib64/libc.so.6
#1 0x000000000059fa47 in tui_restore_gdbout (ui=0x22997b0) at ../../gdb/tui/tui-regs.c:714
#2 0x0000000000619996 in do_my_cleanups (pmy_chain=pmy_chain@entry=0x1e08320 <cleanup_chain>, old_chain=old_chain@entry=0x235b4b0) at ../../gdb/common/cleanups.c:154
#3 0x0000000000619b1d in do_cleanups (old_chain=old_chain@entry=0x235b4b0) at ../../gdb/common/cleanups.c:176
#4 0x000000000059fb0d in tui_register_format (frame=frame@entry=0x22564e0, regnum=regnum@entry=0) at ../../gdb/tui/tui-regs.c:747
#5 0x000000000059ffeb in tui_get_register (data=0x2434d18, changedp=0x0, regnum=0, frame=0x22564e0) at ../../gdb/tui/tui-regs.c:768
#6 tui_show_register_group (refresh_values_only=<optimized out>, frame=0x22564e0, group=0x1e09250 <general_group>) at ../../gdb/tui/tui-regs.c:287
#7 tui_show_registers (group=0x1e09250 <general_group>) at ../../gdb/tui/tui-regs.c:156
#8 0x00000000005a07cf in tui_check_register_values (frame=frame@entry=0x22564e0) at ../../gdb/tui/tui-regs.c:496
#9 0x00000000005a3e65 in tui_check_data_values (frame=frame@entry=0x22564e0) at ../../gdb/tui/tui-windata.c:232
#10 0x000000000059cf65 in tui_refresh_frame_and_register_information (registers_too_p=1) at ../../gdb/tui/tui-hooks.c:156
#11 0x00000000006d5c05 in generic_observer_notify (args=0x7fffffffdbe0, subject=<optimized out>) at ../../gdb/observer.c:167
#12 observer_notify_normal_stop (bs=<optimized out>, print_frame=print_frame@entry=1) at ./observer.inc:61
#13 0x00000000006a6409 in normal_stop () at ../../gdb/infrun.c:8364
#14 0x00000000006af8f5 in fetch_inferior_event (client_data=<optimized out>) at ../../gdb/infrun.c:3990
#15 0x000000000066f0fd in gdb_wait_for_event (block=block@entry=0) at ../../gdb/event-loop.c:859
#16 0x000000000066f237 in gdb_do_one_event () at ../../gdb/event-loop.c:322
#17 0x000000000066f386 in gdb_do_one_event () at ../../gdb/event-loop.c:353
#18 0x00000000007411bc in wait_sync_command_done () at ../../gdb/top.c:570
#19 0x0000000000741426 in maybe_wait_sync_command_done (was_sync=0) at ../../gdb/top.c:587
#20 execute_command (p=<optimized out>, p@entry=0x7fffffffe43a "start", from_tty=from_tty@entry=1) at ../../gdb/top.c:676
#21 0x00000000006c2048 in catch_command_errors (command=0x741200 <execute_command(char*, int)>, arg=0x7fffffffe43a "start", from_tty=1) at ../../gdb/main.c:376
#22 0x00000000006c2b60 in captured_main_1 (context=0x7fffffffde70) at ../../gdb/main.c:1119
#23 captured_main (data=0x7fffffffde70) at ../../gdb/main.c:1140
#24 gdb_main (args=args@entry=0x7fffffffdf90) at ../../gdb/main.c:1158
#25 0x0000000000408cf5 in main (argc=<optimized out>, argv=<optimized out>) at ../../gdb/gdb.c:32
(gdb) f 1
#1 0x000000000059fa47 in tui_restore_gdbout (ui=0x22997b0) at ../../gdb/tui/tui-regs.c:714
714 delete gdb_stdout;
The problem is simply that the commit mentioned above made the ui_file
that gdb_stdout is temporarily set to be a stack-allocated
string_file, while before it used to be a heap-allocated ui_file. The
fix is simply to remove the now-incorrect delete.
New test included, which exercises enabling all TUI layouts, with and
without execution. (This particular crash only triggers with
execution.)
gdb/ChangeLog:
2017-03-07 Pedro Alves <palves@redhat.com>
* tui/tui-regs.c (tui_restore_gdbout): Don't delete gdb_stdout.
gdb/testsuite/ChangeLog:
2017-03-07 Pedro Alves <palves@redhat.com>
* gdb.base/tui-layout.c: New file.
* gdb.base/tui-layout.exp: New file.
This patch starts from the desire to eliminate
make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file &
friends a real C++ class hierarchy, and switches temporary
ui_file-like objects to stack-based allocation.
- mem_fileopen -> string_file
mem_fileopen is replaced with a new string_file class that is treated
as a value class created on the stack. This alone eliminates most
make_cleanup_ui_file_delete calls, and, simplifies code a whole lot
(diffstat shows around 1k loc dropped.)
string_file's internal buffer is a std::string, thus the "string" in
the name. This simplifies the implementation much, compared to
mem_fileopen, which managed growing its internal buffer manually.
- ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone
The new string_file class has a string() method that provides direct
writable access to the internal std::string buffer. This replaced
ui_file_as_string, which forced a copy of the same data the stream had
inside. With direct access via a writable reference, we can instead
move the string out of the string_stream, avoiding deep string
copying.
Related, ui_file_xstrdup calls are replaced with xstrdup'ping the
stream's string, and ui_file_obsavestring is replaced by
obstack_copy0.
With all those out of the way, getting rid of the weird ui_file_put
mechanism was possible.
- New ui_file::printf, ui_file::puts, etc. methods
These simplify / clarify client code. I considered splitting
client-code changes, like these, e.g.:
- stb = mem_fileopen ();
- fprintf_unfiltered (stb, "%s%s%s",
- _("The valid values are:\n"),
- regdesc,
- _("The default is \"std\"."));
+ string_file stb;
+ stb.printf ("%s%s%s",
+ _("The valid values are:\n"),
+ regdesc,
+ _("The default is \"std\"."));
In two steps, with the first step leaving fprintf_unfiltered (etc.)
calls in place, and only afterwards do a pass to change all those to
call stb.printf etc.. I didn't do that split, because (when I tried),
it turned out to be pointless make-work: the first pass would have to
touch the fprintf_unfiltered line anyway, to replace "stb" with
"&stb".
- gdb_fopen replaced with stack-based objects
This avoids the need for cleanups or unique_ptr's. I.e., this:
struct ui_file *file = gdb_fopen (filename, "w");
if (filename == NULL)
perror_with_name (filename);
cleanups = make_cleanup_ui_file_delete (file);
// use file.
do_cleanups (cleanups);
is replaced with this:
stdio_file file;
if (!file.open (filename, "w"))
perror_with_name (filename);
// use file.
- odd contorsions in null_file_write / null_file_fputs around when to
call to_fputs / to_write eliminated.
- Global null_stream object
A few places that were allocating a ui_file in order to print to
"nowhere" are adjusted to instead refer to a new 'null_stream' global
stream.
- TUI's tui_sfileopen eliminated. TUI's ui_file much simplified
The TUI's ui_file was serving a dual purpose. It supported being used
as string buffer, and supported being backed by a stdio FILE. The
string buffer part is gone, replaced by using of string_file. The
'FILE *' support is now much simplified, by making the TUI's ui_file
inherit from stdio_file.
gdb/ChangeLog:
2017-02-02 Pedro Alves <palves@redhat.com>
* ada-lang.c (type_as_string): Use string_file.
* ada-valprint.c (ada_print_floating): Use string_file.
* ada-varobj.c (ada_varobj_scalar_image)
(ada_varobj_get_value_image): Use string_file.
* aix-thread.c (aix_thread_extra_thread_info): Use string_file.
* arm-tdep.c (_initialize_arm_tdep): Use string_printf.
* breakpoint.c (update_inserted_breakpoint_locations)
(insert_breakpoint_locations, reattach_breakpoints)
(print_breakpoint_location, print_one_detail_ranged_breakpoint)
(print_it_watchpoint): Use string_file.
(save_breakpoints): Use stdio_file.
* c-exp.y (oper): Use string_file.
* cli/cli-logging.c (set_logging_redirect): Use ui_file_up and
tee_file.
(pop_output_files): Use delete.
(handle_redirections): Use stdio_file and tee_file.
* cli/cli-setshow.c (do_show_command): Use string_file.
* compile/compile-c-support.c (c_compute_program): Use
string_file.
* compile/compile-c-symbols.c (generate_vla_size): Take a
'string_file &' instead of a 'ui_file *'.
(generate_c_for_for_one_variable): Take a 'string_file &' instead
of a 'ui_file *'. Use string_file.
(generate_c_for_variable_locations): Take a 'string_file &'
instead of a 'ui_file *'.
* compile/compile-internal.h (generate_c_for_for_one_variable):
Take a 'string_file &' instead of a 'ui_file *'.
* compile/compile-loc2c.c (push, pushf, unary, binary)
(print_label, pushf_register_address, pushf_register)
(do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a
'ui_file *'. Adjust.
* compile/compile.c (compile_to_object): Use string_file.
* compile/compile.h (compile_dwarf_expr_to_c)
(compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a
'ui_file *'.
* cp-support.c (inspect_type): Use string_file and obstack_copy0.
(replace_typedefs_qualified_name): Use string_file and
obstack_copy0.
* disasm.c (gdb_pretty_print_insn): Use string_file.
(gdb_disassembly): Adjust reference the null_stream global.
(do_ui_file_delete): Delete.
(gdb_insn_length): Use null_stream.
* dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): Take a
'string_file &' instead of a 'ui_file *'.
* dwarf2loc.h (dwarf2_compile_property_to_c): Likewise.
* dwarf2read.c (do_ui_file_peek_last): Delete.
(dwarf2_compute_name): Use string_file.
* event-top.c (gdb_setup_readline): Use stdio_file.
* gdbarch.sh (verify_gdbarch): Use string_file.
* gdbtypes.c (safe_parse_type): Use null_stream.
* guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use
string_file.
* guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a
'string_file *' instead of a 'ui_file *'.
(gdbscm_arch_disassemble): Use string_file.
* guile/scm-frame.c (frscm_print_frame_smob): Use string_file.
* guile/scm-ports.c (class ioscm_file_port): Now a class that
inherits from ui_file.
(ioscm_file_port_delete, ioscm_file_port_rewind)
(ioscm_file_port_put): Delete.
(ioscm_file_port_write): Rename to ...
(ioscm_file_port::write): ... this. Remove file_port_magic
checks.
(ioscm_file_port_new): Delete.
(ioscm_with_output_to_port_worker): Use ioscm_file_port and
ui_file_up.
* guile/scm-type.c (tyscm_type_name): Use string_file.
* guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print):
Use string_file.
* infcmd.c (print_return_value_1): Use string_file.
* infrun.c (print_target_wait_results): Use string_file.
* language.c (add_language): Use string_file.
* location.c (explicit_to_string_internal): Use string_file.
* main.c (captured_main_1): Use null_file.
* maint.c (maintenance_print_architecture): Use stdio_file.
* mi/mi-cmd-stack.c (list_arg_or_local): Use string_file.
* mi/mi-common.h (struct mi_interp) <out, err, log, targ,
event_channel>: Change type to mi_console_file pointer.
* mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush)
(mi_console_file_delete): Delete.
(struct mi_console_file): Delete.
(mi_console_file_magic): Delete.
(mi_console_file_new): Delete.
(mi_console_file::mi_console_file): New.
(mi_console_file_delete): Delete.
(mi_console_file_fputs): Delete.
(mi_console_file::write): New.
(mi_console_raw_packet): Delete.
(mi_console_file::flush): New.
(mi_console_file_flush): Delete.
(mi_console_set_raw): Rename to ...
(mi_console_file::set_raw): ... this.
* mi/mi-console.h (class mi_console_file): New class.
(mi_console_file_new, mi_console_set_raw): Delete.
* mi/mi-interp.c (mi_interpreter_init): Use mi_console_file.
(mi_set_logging): Use delete and tee_file. Adjust.
* mi/mi-main.c (output_register): Use string_file.
(mi_cmd_data_evaluate_expression): Use string_file.
(mi_cmd_data_read_memory): Use string_file.
(mi_cmd_execute, print_variable_or_computed): Use string_file.
* mi/mi-out.c (mi_ui_out::main_stream): New.
(mi_ui_out::rewind): Use main_stream and
string_file.
(mi_ui_out::put): Use main_stream and string_file.
(mi_ui_out::mi_ui_out): Remove 'stream' parameter.
Allocate a 'string_file' instead.
(mi_out_new): Don't allocate a mem_fileopen stream here.
* mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter.
(mi_ui_out::main_stream): Declare method.
* printcmd.c (eval_command): Use string_file.
* psymtab.c (maintenance_print_psymbols): Use stdio_file.
* python/py-arch.c (archpy_disassemble): Use string_file.
* python/py-breakpoint.c (bppy_get_commands): Use string_file.
* python/py-frame.c (frapy_str): Use string_file.
* python/py-framefilter.c (py_print_type, py_print_single_arg):
Use string_file.
* python/py-type.c (typy_str): Use string_file.
* python/py-unwind.c (unwind_infopy_str): Use string_file.
* python/py-value.c (valpy_str): Use string_file.
* record-btrace.c (btrace_insn_history): Use string_file.
* regcache.c (regcache_print): Use stdio_file.
* reggroups.c (maintenance_print_reggroups): Use stdio_file.
* remote.c (escape_buffer): Use string_file.
* rust-lang.c (rust_get_disr_info): Use string_file.
* serial.c (serial_open_ops_1): Use stdio_file.
(do_serial_close): Use delete.
* stack.c (print_frame_arg): Use string_file.
(print_frame_args): Remove local mem_fileopen stream, not used.
(print_frame): Use string_file.
* symmisc.c (maintenance_print_symbols): Use stdio_file.
* symtab.h (struct symbol_computed_ops) <generate_c_location>:
Take a 'string_file *' instead of a 'ui_file *'.
* top.c (new_ui): Use stdio_file and stderr_file.
(free_ui): Use delete.
(execute_command_to_string): Use string_file.
(quit_confirm): Use string_file.
* tracepoint.c (collection_list::append_exp): Use string_file.
* tui/tui-disasm.c (tui_disassemble): Use string_file.
* tui/tui-file.c: Don't include "ui-file.h".
(enum streamtype, struct tui_stream): Delete.
(tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen)
(tui_file_isatty, tui_file_rewind, tui_file_put): Delete.
(tui_file::tui_file): New method.
(tui_file_fputs): Delete.
(tui_file_get_strbuf): Delete.
(tui_file::puts): New method.
(tui_file_adjust_strbuf): Delete.
(tui_file_flush): Delete.
(tui_file::flush): New method.
* tui/tui-file.h: Tweak intro comment.
Include ui-file.h.
(tui_fileopen, tui_sfileopen, tui_file_get_strbuf)
(tui_file_adjust_strbuf): Delete declarations.
(class tui_file): New class.
* tui/tui-io.c (tui_initialize_io): Use tui_file.
* tui/tui-regs.c (tui_restore_gdbout): Use delete.
(tui_register_format): Use string_stream.
* tui/tui-stack.c (tui_make_status_line): Use string_file.
(tui_get_function_from_frame): Use string_file.
* typeprint.c (type_to_string): Use string_file.
* ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete.
(null_stream): New global.
(ui_file_delete): Delete.
(ui_file::ui_file): New.
(null_file_isatty): Delete.
(ui_file::~ui_file): New.
(null_file_rewind): Delete.
(ui_file::printf): New.
(null_file_put): Delete.
(null_file_flush): Delete.
(ui_file::putstr): New.
(null_file_write): Delete.
(ui_file::putstrn): New.
(null_file_read): Delete.
(ui_file::putc): New.
(null_file_fputs): Delete.
(null_file_write_async_safe): Delete.
(ui_file::vprintf): New.
(null_file_delete): Delete.
(null_file::write): New.
(null_file_fseek): Delete.
(null_file::puts): New.
(ui_file_data): Delete.
(null_file::write_async_safe): New.
(gdb_flush, ui_file_isatty): Adjust.
(ui_file_put, ui_file_rewind): Delete.
(ui_file_write): Adjust.
(ui_file_write_for_put): Delete.
(ui_file_write_async_safe, ui_file_read): Adjust.
(ui_file_fseek): Delete.
(fputs_unfiltered): Adjust.
(set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind)
(set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe)
(set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek)
(set_ui_file_data): Delete.
(string_file::~string_file, string_file::write)
(struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup)
(do_ui_file_as_string, ui_file_as_string): Delete.
(do_ui_file_obsavestring, ui_file_obsavestring): Delete.
(struct mem_file): Delete.
(mem_file_new): Delete.
(stdio_file::stdio_file): New.
(mem_file_delete): Delete.
(stdio_file::stdio_file): New.
(mem_fileopen): Delete.
(stdio_file::~stdio_file): New.
(mem_file_rewind): Delete.
(stdio_file::set_stream): New.
(mem_file_put): Delete.
(stdio_file::open): New.
(mem_file_write): Delete.
(stdio_file_magic, struct stdio_file): Delete.
(stdio_file_new, stdio_file_delete, stdio_file_flush): Delete.
(stdio_file::flush): New.
(stdio_file_read): Rename to ...
(stdio_file::read): ... this. Adjust.
(stdio_file_write): Rename to ...
(stdio_file::write): ... this. Adjust.
(stdio_file_write_async_safe): Rename to ...
(stdio_file::write_async_safe) ... this. Adjust.
(stdio_file_fputs): Rename to ...
(stdio_file::puts) ... this. Adjust.
(stdio_file_isatty): Delete.
(stdio_file_fseek): Delete.
(stdio_file::isatty): New.
(stderr_file_write): Rename to ...
(stderr_file::write) ... this. Adjust.
(stderr_file_fputs): Rename to ...
(stderr_file::puts) ... this. Adjust.
(stderr_fileopen, stdio_fileopen, gdb_fopen): Delete.
(stderr_file::stderr_file): New.
(tee_file_magic): Delete.
(struct tee_file): Delete.
(tee_file::tee_file): New.
(tee_file_new): Delete.
(tee_file::~tee_file): New.
(tee_file_delete): Delete.
(tee_file_flush): Rename to ...
(tee_file::flush): ... this. Adjust.
(tee_file_write): Rename to ...
(tee_file::write): ... this. Adjust.
(tee_file::write_async_safe): New.
(tee_file_fputs): Rename to ...
(tee_file::puts): ... this. Adjust.
(tee_file_isatty): Rename to ...
(tee_file::isatty): ... this. Adjust.
* ui-file.h (struct obstack, struct ui_file): Don't
forward-declare.
(ui_file_new, ui_file_flush_ftype, set_ui_file_flush)
(ui_file_write_ftype)
(set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs)
(ui_file_write_async_safe_ftype, set_ui_file_write_async_safe)
(ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype)
(set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind)
(ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put)
(ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype)
(set_ui_file_fseek): Delete.
(ui_file_data, ui_file_delete, ui_file_rewind)
(struct ui_file): New.
(ui_file_up): New.
(class null_file): New.
(null_stream): Declare.
(ui_file_write_for_put, ui_file_put): Delete.
(ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring):
Delete.
(ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen)
(gdb_fopen, tee_file_new): Delete.
(struct string_file): New.
(struct stdio_file): New.
(stdio_file_up): New.
(struct stderr_file): New.
(class tee_file): New.
* ui-out.c (ui_out::field_stream): Take a 'string_file &' instead
of a 'ui_file *'. Adjust.
* ui-out.h (class ui_out) <field_stream>: Likewise.
* utils.c (do_ui_file_delete, make_cleanup_ui_file_delete)
(null_stream): Delete.
(error_stream): Take a 'string_file &' instead of a 'ui_file *'.
Adjust.
* utils.h (struct ui_file): Delete forward declaration..
(make_cleanup_ui_file_delete, null_stream): Delete declarations.
(error_stream): Take a 'string_file &' instead of a
'ui_file *'.
* varobj.c (varobj_value_get_print_value): Use string_file.
* xtensa-tdep.c (xtensa_verify_config): Use string_file.
* gdbarch.c: Regenerate.
This applies the second part of GDB's End of Year Procedure, which
updates the copyright year range in all of GDB's files.
gdb/ChangeLog:
Update copyright year range in all GDB files.
In the following code:
struct symbol *wsym = (struct symbol *) NULL;
the cast of NULL is redundant, it adds noise, and is just one more thing
to change if the type of wsym ever changes. There are a relatively
small number of places in gdb where the above code pattern is used.
Usually the cast is removed like this:
struct symbol *wsym = NULL;
This commit updates all the places within the gdb/tui directory where we
cast NULL during assignment, removing the cast.
gdb/ChangeLog:
* tui/tui-data.c (win_with_focus): Remove cast of NULL pointer.
(tui_next_win): Likewise.
(tui_prev_win): Likewise.
(tui_partial_win_by_name): Likewise.
(tui_init_generic_part): Likewise.
(init_content_element): Likewise.
(tui_del_window): Likewise.
(tui_free_window): Likewise.
(tui_del_data_windows): Likewise.
(tui_free_data_content): Likewise.
* tui/tui-layout.c (make_source_or_disasm_window): Likewise.
* tui/tui-regs.c (tui_show_register_group): Likewise.
* tui/tui-win.c (tui_resize_all): Likewise.
(tui_set_focus): Likewise.
(tui_set_win_height): Likewise.
(make_invisible_and_set_new_height): Likewise.
* tui/tui-windata.c (tui_delete_data_content_windows): Likewise.
* tui/tui-wingeneral.c (make_visible): Likewise.
We previously specified a few known register groups for the 'tui reg'
command. Other register groups could be accessed, but only by using the
'tui reg next' command and cycling through all the groups.
This commit removes the hard coded sub-commands of 'tui reg' and instead
adds dynamic completion of sub-commands based on the architecturally
defined register groups, giving immediate access to all available
register groups.
There is still the 'next' and 'prev' commands for cycling through the
register groups if that's wanted.
The new code maintains the ability to only enter partial names for
register groups, which is something we got for free when using the
standard sub-command mechanism.
The register (and register group) completer has been changed to use
get_current_arch rather than using the architecture of the currently
selected frame. When the target is running, this is equivalent,
however, when the target is not running, using get_current_arch will
provide results from the default architecture.
gdb/ChangeLog:
* completer.c: Add arch-utils.h include.
(enum reg_completer_targets): New enum.
(reg_or_group_completer_1): New function containing old
reg_or_group_completer, add and use new parameter to control what
is completed on. Use get_current_arch rather than architecture of
currently selected frame.
(reg_or_group_completer): Call new reg_or_group_completer_1.
(reggroup_completer): Call new reg_or_group_completer_1.
* completer.h (reggroup_completer): Add declaration.
* tui/tui-regs.c: Add 'completer.h' include.
(tui_reg_next_command): Renamed to...
(tui_reg_next): ...this. Adjust parameters and return rather than
display new group.
(tui_reg_prev_command): Renamed to...
(tui_reg_prev): ...this. Adjust parameters and return rather than
display new group.
(tui_reg_float_command): Delete.
(tui_reg_general_command): Delete.
(tui_reg_system_command): Delete.
(tui_reg_command): Rewrite to perform switching of register group.
Add header comment.
(tuireglist): Remove.
(tui_reggroup_completer): New function.
(_initialize_tui_regs): Remove 'tui reg' sub-commands, update
creation of 'tui reg' command.
* NEWS: Add comment about 'tui reg' changes.
gdb/doc/ChangeLog:
* gdb.texinfo (TUI Commands): Bring all 'tui reg' commands into a
single table entry.
The layout command supports the layout names $FREGS, $GREGS, $SREGS,
and $REGS. The intention of these layout names was to display the tui
register window with a specific set of registers.
First, these layout names no longer work, and haven't for a while, using
any of them will just result in switching to the general register view.
Second there is already the command 'tui reg GROUP' command to set the
displayed register set to GROUP, so making the layout command also
control the register set feels like unnecessary overloading of the
layout command.
This commit removes all code relating to supporting the register set
specific names from the layout command. Afterwards the user can select
an available layout using the layout command, and control the choice of
register set using the 'tui reg GROUP' command.
gdb/ChangeLog:
* tui/tui-layout.c (tui_set_layout): Remove
tui_register_display_type parameter. Remove all checking of this
parameter, and reindent function. Update header comment.
(tui_set_layout_for_display_command): Rename to...
(tui_set_layout_by_name): ...this, and don't check for different
register class types, don't pass a tui_register_display_type to
tui_set_layout. Update header comment.
(layout_names): Remove register set specific names.
* tui/tui-layout.h (tui_set_layout): Remove
tui_register_display_type parameter.
* tui/tui.c (tui_rl_change_windows): Don't pass a
tui_register_display_type to tui_set_layout.
(tui_rl_delete_other_windows): Likewise.
(tui_enable): Likewise.
* tui/tui-data.h (TUI_FLOAT_REGS_NAME): Remove.
(TUI_FLOAT_REGS_NAME_LOWER): Remove.
(TUI_GENERAL_REGS_NAME): Remove.
(TUI_GENERAL_REGS_NAME_LOWER): Remove.
(TUI_SPECIAL_REGS_NAME): Remove.
(TUI_SPECIAL_REGS_NAME_LOWER): Remove.
(TUI_GENERAL_SPECIAL_REGS_NAME): Remove.
(TUI_GENERAL_SPECIAL_REGS_NAME_LOWER): Remove.
(enum tui_register_display_type): Remove.
(struct tui_layout_def): Remove regs_display_type and
float_regs_display_type fields.
(struct tui_data_info): Remove regs_display_type field.
(tui_layout_command): Use new name for
tui_set_layout_for_display_command.
* tui/tui-data.c (layout_def): Don't initialise removed fields.
(tui_clear_win_detail): Don't initialise removed fields of
win_info.
* tui/tui-regs.c (tui_show_registers): Use new name for
tui_set_layout_for_display_command.
* tui/tui.h (tui_set_layout_for_display_command): Rename
declaration to...
(tui_set_layout_by_name): ...this.
* printcmd.c (display_command): Remove tui related layout call,
and reindent.
The 'content' field of struct tui_gen_win_info currently has type
void ** but the field always stores an object of type tui_win_content.
Instead of unnecessarily casting to and from void ** we should just give
the field the type tui_win_content in the first place.
This patch does this and also eliminates all now-redundant casts
involving the 'content' struct field that I could find.
gdb/ChangeLog:
* tui/tui-data.h (struct tui_win_element): Forward-declare.
(tui_win_content): Move declaration.
(struct tui_gen_win_info): Give 'content' field the
type tui_win_content.
* tui/tui-data.c (init_content_element): Remove redundant and
erroneous casts.
(tui_add_content_elements): Remove erroneous cast.
* tui/tui-disasm.c (tui_set_disassem_content): Remove redundant
casts.
(tui_get_begin_asm_address): Likewise.
* tui/tui-regs.c (tui_show_registers): Likewise.
(tui_show_register_group): Likewise.
(tui_display_registers_from): Likewise.
(tui_check_register_values): Likewise.
* tui/tui-source.c (tui_set_source_content): Likewise.
(tui_set_source_content_nil): Likewise.
(tui_source_is_displayed): Likewise.
* tui/tui-stack.c (tui_show_locator_content): Likewise.
(tui_set_locator_fullname): Likewise.
(tui_set_locator_info): Likewise.
(tui_show_frame_info): Likewise.
* tui/tui-winsource.c (tui_clear_source_content): Likewise.
(tui_show_source_line): Likewise.
(tui_horizontal_source_scroll): Likewise.
(tui_update_breakpoint_info): Likewise.
(tui_set_exec_info_content): Likewise.
(tui_show_exec_info_content): Likewise.
(tui_alloc_source_buffer): Likewise.
(tui_line_is_displayed): Likewise.
(tui_addr_is_displayed): Likewise.
Pedro Alves:
The commands that enables aren't even documented in the manual.
Judging from that, I assume that only wdb users would ever really
be using the --xdb switch.
I think it's time to drop "support" for the --xdb switch too. I
looked through the commands that that exposes, the only that looked
potentially interesting was "go", but then it's just an alias
for "tbreak+jump", which can easily be done with "define go...end".
I'd rather free up the "go" name for something potentially
more interesting (either run control, or maybe even unrelated,
e.g., for golang).
gdb/ChangeLog
2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* NEWS (Changes since GDB 7.9): Add removed -xdb.
* breakpoint.c (command_line_is_silent): Remove xdb_commands
conditional.
(_initialize_breakpoint): Remove xdb_commands for bc, ab, sb, db, ba
and lb.
* cli/cli-cmds.c (_initialize_cli_cmds): Remove xdb_commands for v and
va.
* cli/cli-decode.c (find_command_name_length): Remove xdb_commands
conditional.
* defs.h (xdb_commands): Remove declaration.
* f-valprint.c (_initialize_f_valprint): Remove xdb_commands for lc.
* guile/scm-cmd.c (command_classes): Remove xdb from comment.
* infcmd.c (run_no_args_command, go_command): Remove.
(_initialize_infcmd): Remove xdb_commands for S, go, g, R and lr.
* infrun.c (xdb_handle_command): Remove.
(_initialize_infrun): Remove xdb_commands for lz and z.
* main.c (xdb_commands): Remove variable.
(captured_main): Remove "xdb" from long_options.
(print_gdb_help): Remove --xdb from help.
* python/py-cmd.c (gdbpy_initialize_commands): Remove xdb from comment.
* source.c (_initialize_source): Remove xdb_commands for D, ld, / and ?.
* stack.c (backtrace_full_command, args_plus_locals_info)
(current_frame_command): Remove.
(_initialize_stack): Remove xdb_commands for t, T and l.
* symtab.c (_initialize_symtab): Remove xdb_commands for lf and lg.
* thread.c (_initialize_thread): Remove xdb_commands condition.
* tui/tui-layout.c (tui_toggle_layout_command)
(tui_toggle_split_layout_command, tui_handle_xdb_layout): Remove.
(_initialize_tui_layout): Remove xdb_commands for td and ts.
* tui/tui-regs.c (tui_scroll_regs_forward_command)
(tui_scroll_regs_backward_command): Remove.
(_initialize_tui_regs): Remove xdb_commands for fr, gr, sr, +r and -r.
* tui/tui-win.c (tui_xdb_set_win_height_command): Remove.
(_initialize_tui_win): Remove xdb_commands for U and w.
* utils.c (pagination_on_command, pagination_off_command): Remove.
(initialize_utils): Remove xdb_commands for am and sm.
gdb/doc/ChangeLog
2015-04-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Mode Options): Remove -xdb.
gdb/
2015-01-31 Eli Zaretskii <eliz@gnu.org>
* tui/tui-io.c (tui_expand_tabs): New function.
(tui_puts, tui_redisplay_readline): Expand TABs into the
appropriate number of spaces.
* tui/tui-regs.c: Include tui-io.h.
(tui_register_format): Call tui_expand_tabs to expand TABs into
the appropriate number of spaces.
* tui/tui-io.h: Add prototype for tui_expand_tabs.
Currently there are many calls to help_list that pass the constant -1
as the "class" value. However, the parameter is declared as being of
type enum command_class, and uses of the constant violate this
abstraction.
This patch fixes the error everywhere it occurs in the gdb sources.
Tested by rebuilding.
2014-06-13 Tom Tromey <tromey@redhat.com>
* cp-support.c (maint_cplus_command): Pass all_commands, not -1,
to help_list.
* guile/guile.c (info_guile_command): Pass all_commands, not -1,
to help_list.
* tui/tui-win.c (tui_command): Pass all_commands, not -1, to
help_list.
* tui/tui-regs.c (tui_reg_command): Pass all_commands, not -1, to
help_list.Pass all_commands, not -1, to help_list.
* cli/cli-dump.c (dump_command, append_command)
(srec_dump_command, ihex_dump_command, tekhex_dump_command)
(binary_dump_command, binary_append_command): Pass all_commands,
not -1, to help_list.
* cli/cli-cmds.c (info_command, set_debug): Pass all_commands, not
-1, to help_list.
* valprint.c (set_print, set_print_raw): Pass all_commands, not
-1, to help_list.
* typeprint.c (set_print_type): Pass all_commands, not -1, to
help_list.
* top.c (set_history): Pass all_commands, not -1, to help_list.
* target-descriptions.c (set_tdesc_cmd, unset_tdesc_cmd): Pass
all_commands, not -1, to help_list.
* symfile.c (overlay_command): Pass all_commands, not -1, to
help_list.
* spu-tdep.c (info_spu_command): Pass all_commands, not -1, to
help_list.
* serial.c (serial_set_cmd): Pass all_commands, not -1, to
help_list.
* ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Pass all_commands, not
-1, to help_list.
* remote.c (remote_command, set_remote_cmd): Pass all_commands,
not -1, to help_list.
* ravenscar-thread.c (set_ravenscar_command): Pass all_commands,
not -1, to help_list.
* maint.c (maintenance_command, maintenance_info_command)
(maintenance_print_command, maintenance_set_cmd): Pass
all_commands, not -1, to help_list.
* macrocmd.c (macro_command): Pass all_commands, not -1, to
help_list.
* language.c (set_check): Pass all_commands, not -1, to help_list.
* infcmd.c (unset_command): Pass all_commands, not -1, to
help_list.
* frame.c (set_backtrace_cmd): Pass all_commands, not -1, to
help_list.
* dwarf2read.c (set_dwarf2_cmd): Pass all_commands, not -1, to
help_list.
* dcache.c (set_dcache_command): Pass all_commands, not -1, to
help_list.
* breakpoint.c (save_command): Pass all_commands, not -1, to
help_list.
* ada-lang.c (maint_set_ada_cmd, set_ada_command): Pass
all_commands, not -1, to help_list.
This removes gdb_string.h. This patch is purely mechanical. I
created it by running the two commands:
git rm common/gdb_string.h
perl -pi -e's/"gdb_string.h"/<string.h>/;' *.[chyl] */*.[chyl]
2013-11-18 Tom Tromey <tromey@redhat.com>
* common/gdb_string.h: Remove.
* aarch64-tdep.c: Use string.h, not gdb_string.h.
* ada-exp.y: Use string.h, not gdb_string.h.
* ada-lang.c: Use string.h, not gdb_string.h.
* ada-lex.l: Use string.h, not gdb_string.h.
* ada-typeprint.c: Use string.h, not gdb_string.h.
* ada-valprint.c: Use string.h, not gdb_string.h.
* aix-thread.c: Use string.h, not gdb_string.h.
* alpha-linux-tdep.c: Use string.h, not gdb_string.h.
* alpha-mdebug-tdep.c: Use string.h, not gdb_string.h.
* alpha-nat.c: Use string.h, not gdb_string.h.
* alpha-osf1-tdep.c: Use string.h, not gdb_string.h.
* alpha-tdep.c: Use string.h, not gdb_string.h.
* alphanbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64-dicos-tdep.c: Use string.h, not gdb_string.h.
* amd64-linux-nat.c: Use string.h, not gdb_string.h.
* amd64-linux-tdep.c: Use string.h, not gdb_string.h.
* amd64-nat.c: Use string.h, not gdb_string.h.
* amd64-sol2-tdep.c: Use string.h, not gdb_string.h.
* amd64fbsd-tdep.c: Use string.h, not gdb_string.h.
* amd64obsd-tdep.c: Use string.h, not gdb_string.h.
* arch-utils.c: Use string.h, not gdb_string.h.
* arm-linux-nat.c: Use string.h, not gdb_string.h.
* arm-linux-tdep.c: Use string.h, not gdb_string.h.
* arm-tdep.c: Use string.h, not gdb_string.h.
* arm-wince-tdep.c: Use string.h, not gdb_string.h.
* armbsd-tdep.c: Use string.h, not gdb_string.h.
* armnbsd-nat.c: Use string.h, not gdb_string.h.
* armnbsd-tdep.c: Use string.h, not gdb_string.h.
* armobsd-tdep.c: Use string.h, not gdb_string.h.
* avr-tdep.c: Use string.h, not gdb_string.h.
* ax-gdb.c: Use string.h, not gdb_string.h.
* ax-general.c: Use string.h, not gdb_string.h.
* bcache.c: Use string.h, not gdb_string.h.
* bfin-tdep.c: Use string.h, not gdb_string.h.
* breakpoint.c: Use string.h, not gdb_string.h.
* build-id.c: Use string.h, not gdb_string.h.
* buildsym.c: Use string.h, not gdb_string.h.
* c-exp.y: Use string.h, not gdb_string.h.
* c-lang.c: Use string.h, not gdb_string.h.
* c-typeprint.c: Use string.h, not gdb_string.h.
* c-valprint.c: Use string.h, not gdb_string.h.
* charset.c: Use string.h, not gdb_string.h.
* cli-out.c: Use string.h, not gdb_string.h.
* cli/cli-cmds.c: Use string.h, not gdb_string.h.
* cli/cli-decode.c: Use string.h, not gdb_string.h.
* cli/cli-dump.c: Use string.h, not gdb_string.h.
* cli/cli-interp.c: Use string.h, not gdb_string.h.
* cli/cli-logging.c: Use string.h, not gdb_string.h.
* cli/cli-script.c: Use string.h, not gdb_string.h.
* cli/cli-setshow.c: Use string.h, not gdb_string.h.
* cli/cli-utils.c: Use string.h, not gdb_string.h.
* coffread.c: Use string.h, not gdb_string.h.
* common/common-utils.c: Use string.h, not gdb_string.h.
* common/filestuff.c: Use string.h, not gdb_string.h.
* common/linux-procfs.c: Use string.h, not gdb_string.h.
* common/linux-ptrace.c: Use string.h, not gdb_string.h.
* common/signals.c: Use string.h, not gdb_string.h.
* common/vec.h: Use string.h, not gdb_string.h.
* core-regset.c: Use string.h, not gdb_string.h.
* corefile.c: Use string.h, not gdb_string.h.
* corelow.c: Use string.h, not gdb_string.h.
* cp-abi.c: Use string.h, not gdb_string.h.
* cp-support.c: Use string.h, not gdb_string.h.
* cp-valprint.c: Use string.h, not gdb_string.h.
* cris-tdep.c: Use string.h, not gdb_string.h.
* d-lang.c: Use string.h, not gdb_string.h.
* dbxread.c: Use string.h, not gdb_string.h.
* dcache.c: Use string.h, not gdb_string.h.
* demangle.c: Use string.h, not gdb_string.h.
* dicos-tdep.c: Use string.h, not gdb_string.h.
* disasm.c: Use string.h, not gdb_string.h.
* doublest.c: Use string.h, not gdb_string.h.
* dsrec.c: Use string.h, not gdb_string.h.
* dummy-frame.c: Use string.h, not gdb_string.h.
* dwarf2-frame.c: Use string.h, not gdb_string.h.
* dwarf2loc.c: Use string.h, not gdb_string.h.
* dwarf2read.c: Use string.h, not gdb_string.h.
* elfread.c: Use string.h, not gdb_string.h.
* environ.c: Use string.h, not gdb_string.h.
* eval.c: Use string.h, not gdb_string.h.
* event-loop.c: Use string.h, not gdb_string.h.
* exceptions.c: Use string.h, not gdb_string.h.
* exec.c: Use string.h, not gdb_string.h.
* expprint.c: Use string.h, not gdb_string.h.
* f-exp.y: Use string.h, not gdb_string.h.
* f-lang.c: Use string.h, not gdb_string.h.
* f-typeprint.c: Use string.h, not gdb_string.h.
* f-valprint.c: Use string.h, not gdb_string.h.
* fbsd-nat.c: Use string.h, not gdb_string.h.
* findcmd.c: Use string.h, not gdb_string.h.
* findvar.c: Use string.h, not gdb_string.h.
* fork-child.c: Use string.h, not gdb_string.h.
* frame.c: Use string.h, not gdb_string.h.
* frv-linux-tdep.c: Use string.h, not gdb_string.h.
* frv-tdep.c: Use string.h, not gdb_string.h.
* gdb.c: Use string.h, not gdb_string.h.
* gdb_bfd.c: Use string.h, not gdb_string.h.
* gdbarch.c: Use string.h, not gdb_string.h.
* gdbtypes.c: Use string.h, not gdb_string.h.
* gnu-nat.c: Use string.h, not gdb_string.h.
* gnu-v2-abi.c: Use string.h, not gdb_string.h.
* gnu-v3-abi.c: Use string.h, not gdb_string.h.
* go-exp.y: Use string.h, not gdb_string.h.
* go-lang.c: Use string.h, not gdb_string.h.
* go32-nat.c: Use string.h, not gdb_string.h.
* hppa-hpux-tdep.c: Use string.h, not gdb_string.h.
* hppa-linux-nat.c: Use string.h, not gdb_string.h.
* hppanbsd-tdep.c: Use string.h, not gdb_string.h.
* hppaobsd-tdep.c: Use string.h, not gdb_string.h.
* i386-cygwin-tdep.c: Use string.h, not gdb_string.h.
* i386-dicos-tdep.c: Use string.h, not gdb_string.h.
* i386-linux-nat.c: Use string.h, not gdb_string.h.
* i386-linux-tdep.c: Use string.h, not gdb_string.h.
* i386-nto-tdep.c: Use string.h, not gdb_string.h.
* i386-sol2-tdep.c: Use string.h, not gdb_string.h.
* i386-tdep.c: Use string.h, not gdb_string.h.
* i386bsd-tdep.c: Use string.h, not gdb_string.h.
* i386gnu-nat.c: Use string.h, not gdb_string.h.
* i386nbsd-tdep.c: Use string.h, not gdb_string.h.
* i386obsd-tdep.c: Use string.h, not gdb_string.h.
* i387-tdep.c: Use string.h, not gdb_string.h.
* ia64-libunwind-tdep.c: Use string.h, not gdb_string.h.
* ia64-linux-nat.c: Use string.h, not gdb_string.h.
* inf-child.c: Use string.h, not gdb_string.h.
* inf-ptrace.c: Use string.h, not gdb_string.h.
* inf-ttrace.c: Use string.h, not gdb_string.h.
* infcall.c: Use string.h, not gdb_string.h.
* infcmd.c: Use string.h, not gdb_string.h.
* inflow.c: Use string.h, not gdb_string.h.
* infrun.c: Use string.h, not gdb_string.h.
* interps.c: Use string.h, not gdb_string.h.
* iq2000-tdep.c: Use string.h, not gdb_string.h.
* irix5-nat.c: Use string.h, not gdb_string.h.
* jv-exp.y: Use string.h, not gdb_string.h.
* jv-lang.c: Use string.h, not gdb_string.h.
* jv-typeprint.c: Use string.h, not gdb_string.h.
* jv-valprint.c: Use string.h, not gdb_string.h.
* language.c: Use string.h, not gdb_string.h.
* linux-fork.c: Use string.h, not gdb_string.h.
* linux-nat.c: Use string.h, not gdb_string.h.
* lm32-tdep.c: Use string.h, not gdb_string.h.
* m2-exp.y: Use string.h, not gdb_string.h.
* m2-typeprint.c: Use string.h, not gdb_string.h.
* m32c-tdep.c: Use string.h, not gdb_string.h.
* m32r-linux-nat.c: Use string.h, not gdb_string.h.
* m32r-linux-tdep.c: Use string.h, not gdb_string.h.
* m32r-rom.c: Use string.h, not gdb_string.h.
* m32r-tdep.c: Use string.h, not gdb_string.h.
* m68hc11-tdep.c: Use string.h, not gdb_string.h.
* m68k-tdep.c: Use string.h, not gdb_string.h.
* m68kbsd-tdep.c: Use string.h, not gdb_string.h.
* m68klinux-nat.c: Use string.h, not gdb_string.h.
* m68klinux-tdep.c: Use string.h, not gdb_string.h.
* m88k-tdep.c: Use string.h, not gdb_string.h.
* macrocmd.c: Use string.h, not gdb_string.h.
* main.c: Use string.h, not gdb_string.h.
* mdebugread.c: Use string.h, not gdb_string.h.
* mem-break.c: Use string.h, not gdb_string.h.
* memattr.c: Use string.h, not gdb_string.h.
* memory-map.c: Use string.h, not gdb_string.h.
* mep-tdep.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-break.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-disas.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-env.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-stack.c: Use string.h, not gdb_string.h.
* mi/mi-cmd-var.c: Use string.h, not gdb_string.h.
* mi/mi-cmds.c: Use string.h, not gdb_string.h.
* mi/mi-console.c: Use string.h, not gdb_string.h.
* mi/mi-getopt.c: Use string.h, not gdb_string.h.
* mi/mi-interp.c: Use string.h, not gdb_string.h.
* mi/mi-main.c: Use string.h, not gdb_string.h.
* mi/mi-parse.c: Use string.h, not gdb_string.h.
* microblaze-rom.c: Use string.h, not gdb_string.h.
* microblaze-tdep.c: Use string.h, not gdb_string.h.
* mingw-hdep.c: Use string.h, not gdb_string.h.
* minidebug.c: Use string.h, not gdb_string.h.
* minsyms.c: Use string.h, not gdb_string.h.
* mips-irix-tdep.c: Use string.h, not gdb_string.h.
* mips-linux-tdep.c: Use string.h, not gdb_string.h.
* mips-tdep.c: Use string.h, not gdb_string.h.
* mips64obsd-tdep.c: Use string.h, not gdb_string.h.
* mipsnbsd-tdep.c: Use string.h, not gdb_string.h.
* mipsread.c: Use string.h, not gdb_string.h.
* mn10300-linux-tdep.c: Use string.h, not gdb_string.h.
* mn10300-tdep.c: Use string.h, not gdb_string.h.
* monitor.c: Use string.h, not gdb_string.h.
* moxie-tdep.c: Use string.h, not gdb_string.h.
* mt-tdep.c: Use string.h, not gdb_string.h.
* nbsd-tdep.c: Use string.h, not gdb_string.h.
* nios2-linux-tdep.c: Use string.h, not gdb_string.h.
* nto-procfs.c: Use string.h, not gdb_string.h.
* nto-tdep.c: Use string.h, not gdb_string.h.
* objc-lang.c: Use string.h, not gdb_string.h.
* objfiles.c: Use string.h, not gdb_string.h.
* opencl-lang.c: Use string.h, not gdb_string.h.
* osabi.c: Use string.h, not gdb_string.h.
* osdata.c: Use string.h, not gdb_string.h.
* p-exp.y: Use string.h, not gdb_string.h.
* p-lang.c: Use string.h, not gdb_string.h.
* p-typeprint.c: Use string.h, not gdb_string.h.
* parse.c: Use string.h, not gdb_string.h.
* posix-hdep.c: Use string.h, not gdb_string.h.
* ppc-linux-nat.c: Use string.h, not gdb_string.h.
* ppc-sysv-tdep.c: Use string.h, not gdb_string.h.
* ppcfbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcnbsd-tdep.c: Use string.h, not gdb_string.h.
* ppcobsd-tdep.c: Use string.h, not gdb_string.h.
* printcmd.c: Use string.h, not gdb_string.h.
* procfs.c: Use string.h, not gdb_string.h.
* prologue-value.c: Use string.h, not gdb_string.h.
* python/py-auto-load.c: Use string.h, not gdb_string.h.
* python/py-gdb-readline.c: Use string.h, not gdb_string.h.
* ravenscar-thread.c: Use string.h, not gdb_string.h.
* regcache.c: Use string.h, not gdb_string.h.
* registry.c: Use string.h, not gdb_string.h.
* remote-fileio.c: Use string.h, not gdb_string.h.
* remote-m32r-sdi.c: Use string.h, not gdb_string.h.
* remote-mips.c: Use string.h, not gdb_string.h.
* remote-sim.c: Use string.h, not gdb_string.h.
* remote.c: Use string.h, not gdb_string.h.
* reverse.c: Use string.h, not gdb_string.h.
* rs6000-aix-tdep.c: Use string.h, not gdb_string.h.
* ser-base.c: Use string.h, not gdb_string.h.
* ser-go32.c: Use string.h, not gdb_string.h.
* ser-mingw.c: Use string.h, not gdb_string.h.
* ser-pipe.c: Use string.h, not gdb_string.h.
* ser-tcp.c: Use string.h, not gdb_string.h.
* ser-unix.c: Use string.h, not gdb_string.h.
* serial.c: Use string.h, not gdb_string.h.
* sh-tdep.c: Use string.h, not gdb_string.h.
* sh64-tdep.c: Use string.h, not gdb_string.h.
* shnbsd-tdep.c: Use string.h, not gdb_string.h.
* skip.c: Use string.h, not gdb_string.h.
* sol-thread.c: Use string.h, not gdb_string.h.
* solib-dsbt.c: Use string.h, not gdb_string.h.
* solib-frv.c: Use string.h, not gdb_string.h.
* solib-osf.c: Use string.h, not gdb_string.h.
* solib-spu.c: Use string.h, not gdb_string.h.
* solib-target.c: Use string.h, not gdb_string.h.
* solib.c: Use string.h, not gdb_string.h.
* somread.c: Use string.h, not gdb_string.h.
* source.c: Use string.h, not gdb_string.h.
* sparc-nat.c: Use string.h, not gdb_string.h.
* sparc-sol2-tdep.c: Use string.h, not gdb_string.h.
* sparc-tdep.c: Use string.h, not gdb_string.h.
* sparc64-tdep.c: Use string.h, not gdb_string.h.
* sparc64fbsd-tdep.c: Use string.h, not gdb_string.h.
* sparc64nbsd-tdep.c: Use string.h, not gdb_string.h.
* sparcnbsd-tdep.c: Use string.h, not gdb_string.h.
* spu-linux-nat.c: Use string.h, not gdb_string.h.
* spu-multiarch.c: Use string.h, not gdb_string.h.
* spu-tdep.c: Use string.h, not gdb_string.h.
* stabsread.c: Use string.h, not gdb_string.h.
* stack.c: Use string.h, not gdb_string.h.
* std-regs.c: Use string.h, not gdb_string.h.
* symfile.c: Use string.h, not gdb_string.h.
* symmisc.c: Use string.h, not gdb_string.h.
* symtab.c: Use string.h, not gdb_string.h.
* target.c: Use string.h, not gdb_string.h.
* thread.c: Use string.h, not gdb_string.h.
* tilegx-linux-nat.c: Use string.h, not gdb_string.h.
* tilegx-tdep.c: Use string.h, not gdb_string.h.
* top.c: Use string.h, not gdb_string.h.
* tracepoint.c: Use string.h, not gdb_string.h.
* tui/tui-command.c: Use string.h, not gdb_string.h.
* tui/tui-data.c: Use string.h, not gdb_string.h.
* tui/tui-disasm.c: Use string.h, not gdb_string.h.
* tui/tui-file.c: Use string.h, not gdb_string.h.
* tui/tui-layout.c: Use string.h, not gdb_string.h.
* tui/tui-out.c: Use string.h, not gdb_string.h.
* tui/tui-regs.c: Use string.h, not gdb_string.h.
* tui/tui-source.c: Use string.h, not gdb_string.h.
* tui/tui-stack.c: Use string.h, not gdb_string.h.
* tui/tui-win.c: Use string.h, not gdb_string.h.
* tui/tui-windata.c: Use string.h, not gdb_string.h.
* tui/tui-winsource.c: Use string.h, not gdb_string.h.
* typeprint.c: Use string.h, not gdb_string.h.
* ui-file.c: Use string.h, not gdb_string.h.
* ui-out.c: Use string.h, not gdb_string.h.
* user-regs.c: Use string.h, not gdb_string.h.
* utils.c: Use string.h, not gdb_string.h.
* v850-tdep.c: Use string.h, not gdb_string.h.
* valarith.c: Use string.h, not gdb_string.h.
* valops.c: Use string.h, not gdb_string.h.
* valprint.c: Use string.h, not gdb_string.h.
* value.c: Use string.h, not gdb_string.h.
* varobj.c: Use string.h, not gdb_string.h.
* vax-tdep.c: Use string.h, not gdb_string.h.
* vaxnbsd-tdep.c: Use string.h, not gdb_string.h.
* vaxobsd-tdep.c: Use string.h, not gdb_string.h.
* windows-nat.c: Use string.h, not gdb_string.h.
* xcoffread.c: Use string.h, not gdb_string.h.
* xml-support.c: Use string.h, not gdb_string.h.
* xstormy16-tdep.c: Use string.h, not gdb_string.h.
* xtensa-linux-nat.c: Use string.h, not gdb_string.h.
I stumbled on the TUI's register-changed decision code before (used to
decided whether the register should be highlighted in the register
window), for it is trying to compare all the different possible states
and contents or previous/current register contents, and as such may
need updating whenever the value machinery changes to have more state.
It's just much simpler and more future proof to compare the
previous/current printable representation instead.
The bit in tui_register_format that returns early if the register has
no name gets a bit in the way of the new prototype (what to return in
that case? NULL, empty string, etc.?). Fortunately, that check isn't
really necessary. All the callers will have already skipped unnamed
registers.
gdb/
2013-09-05 Pedro Alves <palves@redhat.com>
* tui/tui-regs.c (tui_register_format): Don't look at the
register's name here. Return string representing register
value instead of storing it in the data element.
(tui_get_register): Compare register string representations
instead of register value states and contents.
I've stumbled on this by inspection.
When the TUI's register window is first displayed, it always shows the
registers of the current frame, instead of of the selected frame,
which is obviously bogus.
E.g.,
(gdb) step # into "function"
(gdb) up
(gdb) tui reg general # or C-x 2, C-x 2
shows the registers of "function", rather than the caller's.
A subsequent:
(gdb) frame
or
(gdb) down
(gdb) up
can be used as workaround to "fix" it.
gdb/
2013-09-05 Pedro Alves <palves@redhat.com>
PR tui/15933
* tui/tui-regs.c (tui_show_registers): Show registers of the
selected frame, not the current frame.
PR tui/14880 shows a reproducer that triggers this assertion:
int
value_available_contents_eq (const struct value *val1, int offset1,
const struct value *val2, int offset2,
int length)
{
int idx1 = 0, idx2 = 0;
/* This routine is used by printing routines, where we should
already have read the value. Note that we only know whether a
value chunk is available if we've tried to read it. */
gdb_assert (!val1->lazy && !val2->lazy);
(top-gdb) bt
#0 internal_error (file=0x88a26c "../../src/gdb/value.c", line=549, string=0x88a220 "%s: Assertion `%s' failed.") at ../../src/gdb/utils.c:844
#1 0x000000000057b9cd in value_available_contents_eq (val1=0x10fa900, offset1=0, val2=0x10f9e10, offset2=0, length=8) at ../../src/gdb/value.c:549
#2 0x00000000004fd756 in tui_get_register (frame=0xd5c430, data=0x109a548, regnum=0, changedp=0x109a560) at ../../src/gdb/tui/tui-regs.c:736
#3 0x00000000004fd111 in tui_check_register_values (frame=0xd5c430) at ../../src/gdb/tui/tui-regs.c:521
#4 0x0000000000501884 in tui_check_data_values (frame=0xd5c430) at ../../src/gdb/tui/tui-windata.c:234
#5 0x00000000004f976f in tui_selected_frame_level_changed_hook (level=1) at ../../src/gdb/tui/tui-hooks.c:222
#6 0x00000000006f0681 in select_frame (fi=0xd5c430) at ../../src/gdb/frame.c:1490
#7 0x00000000005dd94b in up_silently_base (count_exp=0x0) at ../../src/gdb/stack.c:2268
#8 0x00000000005dd985 in up_command (count_exp=0x0, from_tty=1) at ../../src/gdb/stack.c:2280
#9 0x00000000004dc5cf in do_cfunc (c=0xd3f720, args=0x0, from_tty=1) at ../../src/gdb/cli/cli-decode.c:113
#10 0x00000000004df664 in cmd_func (cmd=0xd3f720, args=0x0, from_tty=1) at ../../src/gdb/cli/cli-decode.c:1888
#11 0x00000000006e43e1 in execute_command (p=0xc7e6c2 "", from_tty=1) at ../../src/gdb/top.c:489
The fix is to fetch the value before comparing the contents. The
comment additions to value.h explain why it can't be
value_available_contents_eq itself that fetches the contents.
Tested on x86_64 Fedora 17.
gdb/
2013-06-28 Pedro Alves <palves@redhat.com>
PR tui/14880
* tui/tui-regs.c (tui_get_register): Fetch register value contents
before checking whether they're available.
* value.c (value_available_contents_eq): Change comment.
* value.h (value_available_contents_eq): Expand comment.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
PR tui/13073
gdb/
* tui/tui-regs.c (tui_show_register_group): Skip registers with an
empty name.
(tui_show_register_group): Don't store a byte buffer in the data
element's value.
(tui_register_format): Skip registers with an empty name.
(tui_get_register): Store a struct value in the data element's
value field instead of a byte buffer holding the raw register
contents. Account for optimized-out and unavailable registers
when comparing register contents.
* tui/tui.c: White space.
* tui/tui-data.c: White space.
* tui/tui-disasm.c: White space.
* tui/tui-file.c: White space.
* tui/tui-interp.c: White space.
* tui/tui-main.c: White space.
* tui/tui-out.c: White space.
* tui/tui-regs.c: White space.
* tui/tui-source.c: White space.
* tui/tui-stack.c: White space.
* tui/tui-win.c: White space.
* tui/tui-winsource.c: White space.
(show_endian): Use target_byte_order_user if specified; otherwise
use get_current_arch () instead of current_gdbarch.
(show_architecture): Use set_architecture_string if specified;
otherwise use get_current_arch () instead of current_gdbarch.
(get_current_arch): New function.
* arch-utils.h (get_current_arch): Add prototype.
* osabi.c (show_osabi): Use get_current_arch () instead of
current_gdbarch.
* findcmd.c: Include "arch-utils.h".
(parse_find_args): Add BIG_P argument. Use it instead of byte order
of current_gdbarch.
(find_command): Use get_current_arch () instead of current_gdbarch.
Pass byte order to parse_find_args.
* maint.c: Include "arch-utils.h".
(maintenance_print_architecture): Use get_current_arch () instead
of current_gdbarch.
* reggroups.c: Include "arch-utils.h".
(maintenance_print_reggroups): Use get_current_arch () instead
of current_gdbarch.
* symfile.c: Include "arch-utils.h".
(overlay_load_command): Use get_current_arch () instead of
current_gdbarch.
* value.c: Include "arch-utils.h".
(show_convenience): Use get_current_arch () instead of
current_gdbarch.
* tui/tui-regs.c: Include "arch-utils.h".
(tui_reg_next_command): Use get_current_arch () instead of
current_gdbarch.
* mi/mi-main.c: Include "arch-utils.h".
(mi_cmd_data_read_memory): Use get_current_arch () instead of
current_gdbarch.
* parse.c: Include "arch-utils.h".
(parse_exp_in_context): Use get_current_arch () instead of
current_gdbarch.
Silence a few -Wmissing-prototypes warnings.
PR build/9877:
* amd64-nat.c: Include "amd64-nat.h".
* fork-child.c (_initialize_fork_child): Ditto.
* gcore.c (_initialize_gcore): Ditto.
* inf-ptrace.c: Include "inf-ptrace.h".
(inf_ptrace_store_registers): Make it static.
* linux-nat.c (linux_nat_terminal_ours): Make it static.
(_initialize_linux_nat): Declare before definition.
* linux-tdep.c: Include "linux-tdep.h".
* linux-thread-db.c (_initialize_thread_db): Declare before
definition.
* proc-service.c (_initialize_proc_service): Ditto.
* remote.c (remote_send_printf): Make it static.
* solib.c: Include "solib.h".
* symfile-mem.c (_initialize_symfile_mem): Declare before
definition.
* ada-lang.c (ada_la_decode, ada_match_name)
(ada_suppress_symbol_printing, ada_is_array_type)
(ada_value_ptr_subscript, ada_array_length)
(ada_to_static_fixed_value): Make them static.
(_initialize_ada_language): Declare before definition.
* ada-tasks.c (ada_get_task_number, ada_get_environment_task)
(ada_task_list_changed, ada_new_objfile_observer): Make them
static.
(_initialize_tasks): Declare before definition.
* addrmap.c (_initialize_addrmap): Declare before definition.
* auxv.c (default_auxv_parse): Make it static.
* bfd-target.c (target_bfd_xfer_partial, target_bfd_xclose): Make
them static.
* breakpoint.c (remove_sal): Add line break.
(expand_line_sal_maybe): Make it static.
* cp-name-parser.y: Include "cp-support.h".
* cp-valprint.c (cp_find_class_member): Make it static.
* eval.c (value_f90_subarray): Ditto.
* exceptions.c (print_any_exception): Ditto.
* findcmd.c (_initialize_mem_search): Declare before definition.
* frame.c (frame_observer_target_changed): Make it static.
* gnu-v3-abi.c (gnuv3_find_method_in): Make it static.
* inf-child.c: Include "inf-child.h".
* inferior.h (valid_inferior_id): Rename to ...
(valid_gdb_inferior_id): ... this.
* infrun.c (infrun_thread_stop_requested, siginfo_make_value):
Make them static.
* jv-lang.c (java_language_arch_info): Make it static.
* m2-typeprint.c (m2_get_discrete_bounds): Ditto.
* osdata.c (info_osdata_command): Make it static.
* regcache.c (regcache_observer_target_changed): Make it static.
* reverse.c (_initialize_reverse): Declare before definition.
* stabsread.c (cleanup_undefined_types_noname)
(cleanup_undefined_types_1): Make them static.
* symfile.c (place_section): Make it static.
* symtab.c (find_pc_sect_psymtab_closer): Make it static.
* target-descriptions.c (_initialize_target_descriptions): Declare
before definition.
* target.c (default_get_ada_task_ptid, find_default_can_async_p)
(find_default_is_async_p, find_default_supports_non_stop): Make
them static.
(target_supports_non_stop): Add prototype.
(dummy_pid_to_str): Make it static.
* utils.c (_initialize_utils): Declare before definition.
* ada-exp.y (_initialize_ada_exp): Declare before definition.
* solib-svr4.c (HAS_LM_DYNAMIC_FROM_LINK_MAP): Add a prototype.
* target.h (struct target_ops): Add a prototype to the
to_can_execute_reverse callback.
* macroscope.c (_initialize_macroscope): Declare before definition.
* cp-namespace.c (_initialize_cp_namespace): Declare before definition.
* python/python.c (_initialize_python): Declare before definition.
* tui/tui-command.c: Include "tui/tui-command.h".
* tui/tui-data.c (init_content_element, init_win_info): Make them
static.
* tui/tui-disasm.c: Include "tui/tui-disasm.h".
* tui/tui-interp.c (_initialize_tui_interp): Declare before
definition.
* tui/tui-layout.c: Include "tui/tui-layout.h".
(_initialize_tui_layout): Declare before definition.
* tui/tui-regs.c: Include "tui/tui-regs.h".
(tui_display_reg_element_at_line): Make it static.
(_initialize_tui_regs): Declare before definition.
* tui/tui-stack.c (_initialize_tui_stack): Declare before
definition.
* tui/tui-win.c: Include "tui/tui-win.h".
(_initialize_tui_win): Declare before definition.
(tui_sigwinch_handler): Make it static. Wrap in ifdef SIGWINCH.
* tui/tui-win.h (tui_sigwinch_handler): Delete declaration.
(tui_get_cmd_list): Add a prototype.
* tui/tui-windata.c: Include tui-windata.h.
* tui/tui-wingeneral.c (box_win): Make it static.
* cli/cli-logging.c (show_logging_command): Make it static.
(_initialize_cli_logging): Declare before definition.
* mi/mi-common.c (_initialize_gdb_mi_common): Declare before
definition.
* tui-command.c, tui-data.c, tui-disasm.c, tui-file.c, tui-io.c,
tui-layout.c, tui-regs.c, tui-source.c, tui-win.c, tui-windata.c,
tui-wingeneral.c, tui-winsource.c: Coding standard, && and ||
go at beginning of new line.