This constifies the parameter to remote_console_output.
gdb/ChangeLog
2019-01-14 Tom Tromey <tom@tromey.com>
* remote.c (remote_console_output): Make parameter const.
This constifies the final parameter to target_pass_signals and
target_program_signals and updates the rest of gdb.
Note that I have no way to test the nto-procfs.c change.
gdb/ChangeLog
2019-01-14 Tom Tromey <tom@tromey.com>
* target-debug.h (target_debug_print_signals): Constify.
* nto-procfs.c (nto_procfs_target::pass_signals): Update.
* procfs.c (procfs_target::pass_signals): Update.
* linux-nat.c (linux_nat_target::pass_signals): Update.
* linux-nat.h (class linux_nat_target) <pass_signals>: Update.
* target-delegates.c: Rebuild.
* remote.c (remote_target::program_signals): Update.
(remote_target::pass_signals): Update.
* target.c (target_pass_signals): Constify argument.
(target_program_signals): Likewise.
* target.h (struct target_ops) <pass_signals, program_signals>:
Constify argument.
(target_pass_signals, target_program_signals): Constify argument.
The fix for PR tui/28819 regressed gdb command output a bit. In
"nonl" mode, pressing the Enter key will result in a newline not being
echoed properly, so that gdb output for the command will begin on the
same line as the input.
This patch changes gdb_wgetch to echo the newline. I have only tested
this interactively, as the TUI doesn't have automated tests in
general.
gdb/ChangeLog
2019-01-14 Tom Tromey <tom@tromey.com>
PR tui/28819:
* tui/tui-io.c (gdb_wgetch): Print \r when needed.
This patch defines pseudo-registers "v0" through "v31" as aliases that
map to the corresponding raw "vr0" through "vr31" vector registers for
Power.
The motivation behind this is that although GDB defines these
registers as "vrX", the disassembler prints them as "vX", e.g. as the
operands in instructions such as "vaddubm v2,v1,v1". This can be
confusing to users trying to print out the values of the operands
while inspecting the disassembled code.
The new aliases are made not to belong to any register group, to avoid
duplicated values in "info register vector" and "info register all".
The arch-specific rs6000_pseudo_register_reggroup_p function had
previously been removed since the other pseudo-registers could have
their groups inferred by their type. It restored with this patch to
handle the aliases. Membership for the other pseudo-registers is
still determined using the default function.
A new tests checks that GDB prints the expected values of vector
registers after they are filled by the inferior, by using both the raw
names and the aliases. Two other existing tests are modified to also
test the aliases.
gdb/ChangeLog:
2019-01-14 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* ppc-tdep.h (struct gdbarch_tdep) <ppc_v0_alias_regnum>: New
field.
* rs6000-tdep.c: Include reggroups.h.
(IS_V_ALIAS_PSEUDOREG): Define.
(rs6000_register_name): Return names for the "vX" aliases.
(rs6000_pseudo_register_type): Return type for the "vX" aliases.
(rs6000_pseudo_register_reggroup_p): Restore. Handle "vX"
aliases. Call default_register_reggroup_p for all other
pseudo-registers.
(v_alias_pseudo_register_read, v_alias_pseudo_register_write):
New functions.
(rs6000_pseudo_register_read, rs6000_pseudo_register_write):
Handle "vX" aliases.
(v_alias_pseudo_register_collect): New function.
(rs6000_ax_pseudo_register_collect): Handle "vX" aliases.
(rs6000_gdbarch_init): Initialize "vX" aliases as
pseudo-registers. Restore registration of
rs6000_pseudo_register_reggroup_p with
set_tdesc_pseudo_register_reggroup_p.
gdb/testsuite/ChangeLog:
2019-01-14 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.arch/vsx-regs.exp: Add tests that use the vector register
aliases.
* gdb.arch/altivec-regs.exp: Likewise. Fix indentation of two
tests.
* gdb.arch/powerpc-vector-regs.c: New file.
* gdb.arch/powerpc-vector-regs.exp: New file.
gdb/doc/ChangeLog:
2019-01-14 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.texinfo (PowerPC Features): Document the alias
pseudo-registers for the org.gnu.gdb.power.altivec feature.
This patch fixes one of the tests in gdb.arch/altivec-regs.exp that
was passing an incorrect list to gdb_expect_list, which always
matched.
gdb/testsuite/ChangeLog:
2019-01-14 Pedro Franco de Carvalho <pedromfc@linux.ibm.com>
* gdb.arch/altivec-regs.exp: Fix the list passed to
gdb_expect_list when testing "info vector".
Commit 37d9e06231 ("gdb: xtensa: handle privileged registers") changed
how the tdep->num_regs and tdep->num_pseudo_regs are calculated, but
didn't update these numbers in the gdbarch for the xtensa-linux target.
As a result xtensa-linux-gdb behaves as xtensa-elf-gdb and cannot
communicate with the linux gdbserver.
Fix tdep->num_pseudo_regs calculation and call set_gdbarch_num_regs and
set_gdbarch_num_pseudo_regs in xtensa_linux_init_abi.
gdb/
2019-01-13 Max Filippov <jcmvbkbc@gmail.com>
* xtensa-linux-tdep.c (xtensa_linux_init_abi): Update
tdep->num_pseudo_regs. Add calls to set_gdbarch_num_regs and
set_gdbarch_num_pseudo_regs.
Currently, the behaviour is:
(gdb) show style
(gdb) set style
(gdb) show style address
(gdb) set style address
(gdb)
With this patch, the behaviour is:
(gdb) show style
style address background: The "address" background color is: none
style address foreground: The "address" foreground color is: blue
style address intensity: The "address" display intensity is: normal
enabled: CLI output styling is enabled.
style filename background: The "filename" background color is: none
style filename foreground: The "filename" foreground color is: green
style filename intensity: The "filename" display intensity is: normal
style function background: The "function" background color is: none
style function foreground: The "function" foreground color is: yellow
style function intensity: The "function" display intensity is: normal
style variable background: The "variable" background color is: none
style variable foreground: The "variable" foreground color is: cyan
style variable intensity: The "variable" display intensity is: normal
(gdb) set style
"set style" must be followed by an appropriate subcommand.
List of set style subcommands:
set style address -- Address display styling
set style enabled -- Set whether CLI styling is enabled
set style filename -- Filename display styling
set style function -- Function name display styling
set style variable -- Variable name display styling
Type "help set style" followed by set style subcommand name for full documentation.
Type "apropos word" to search for commands related to "word".
Command name abbreviations are allowed if unambiguous.
(gdb) show style address
background: The "filename" background color is: none
foreground: The "filename" foreground color is: green
intensity: The "filename" display intensity is: normal
(gdb) set style address
List of set style address subcommands:
set style address background -- Set the background color for this property
set style address foreground -- Set the foreground color for this property
set style address intensity -- Set the display intensity color for this property
Type "help set style address" followed by set style address subcommand name for full documentation.
Type "apropos word" to search for commands related to "word".
Command name abbreviations are allowed if unambiguous.
(gdb)
gdb/ChangeLog
* cli/cli-style.h (class cli_style_option): <add_setshow_commands>
Remove arg prefixname, add do_set and do_show.
Add member functions set_list and show_list.
* cli/cli-style.c (class cli_style_option): Update accordingly.
(style_set_list): Move to file scope.
(style_show_list): Likewise.
(set_style): Call help_list.
(show_style): Call cmd_show_list.
(_initialize_cli_style): New macro STYLE_ADD_SETSHOW_COMMANDS.
Update to use the new macro.
One of our users remarked that the help doesn't mention the fact that
the "catch exception" supports the special argument "unhandled" to catch
exceptions which do not have a handler. This patch changes the output
of...
| (gdb) help catch exception
| Catch Ada exceptions, when raised.
| With an argument, catch only exceptions with the given name.
... to ...
| (gdb) help catch exception
| Catch Ada exceptions, when raised.
| Usage: catch exception [ ARG ]
|
| Without any argument, stop when any Ada exception is raised.
| If ARG is "unhandled" (without the quotes), only stop when the exception
| being raised does not have a handler (and will therefore lead to the task's
| termination).
| Otherwise, the catchpoint only stops when the name of the exception being
| raised is the same as ARG.
gdb/ChangeLog:
* ada-lang.c (_initialize_ada_language): Expand the help text
for the "catch exception" command.
Tested on x86_64-linux, no regression.
Having paths in the test names makes it harder to compare results
between two runs in different directories. Give the test a name so
that the path doesn't appear.
gdb/ChangeLog:
* gdb.base/style.exp: Don't include path in testname.
Fix warning:
gdb/symtab.c: In function ‘int matching_obj_sections(obj_section*, obj_section*)’:
gdb/symtab.c:1024:12: warning: ‘obj’ may be used uninitialized in this function [-Wmaybe-uninitialized]
if (obj->separate_debug_objfile_backlink != NULL
2019-01-12 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* symtab.c (matching_obj_sections): Initialize obj,
declare it closer to its usage.
This changes inf_threads_iterator and some range adapters in
thread-iter.h to use next_iterator and next_adapter instead.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* thread-iter.h (inf_threads_iterator): Use next_iterator.
(basic_inf_threads_range): Remove.
(inf_threads_range, inf_non_exited_threads_range)
(safe_inf_threads_range): Use next_adapter.
This is a test derived from one of the reproducers in symtab/23010.
The DIE tree used here is typical of compilations with LTO, where an
artificial parent DIE of language C99 imports DIEs of other languages.
gdb/testsuite/ChangeLog:
PR gdb/23712
PR symtab/23010
* gdb.dwarf2/multidictionary.exp: New file.
Finally, we can remove dw2_add_symbol_to_list since the wrapper function
originally introduced to catch this multi-language scenario is no longer
needed. With multi-language dictionaries, we can now support adding
symbols of multiple languages, negating the need for the assertion
entirely.
This patch should now fix gdb/23712 (and symtab/23010). At least it will
if the NULL buildsym_compunit problem doesn't strike first (see gdb/23773).
gdb/ChangeLog:
PR gdb/23712
PR symtab/23010
* dwarf2read.c (dw2_add_symbol_to_list): Remove.
(fixup_go_packaging, new_symbol): Use add_symbol_to_list.
Now that multidictionary's are being used, there is no longer any need
to retain the four temporary functions introduced in the beginning of
this series.
This patch removes them.
As an additional cleanup, since the single-language dictionaries are
no longer used outside dictionary.c, make all of those functions
static.
gdb/ChangeLog:
PR gdb/23712
PR symtab/23010
* dictionary.c (pending_to_vector): Remove.
(dict_create_hashed_1, dict_create_linear_1, dict_add_pending_1):
Remove _1 suffix, replacing functions of the same name. Update
all callers.
(dict_create_hashed, dict_create_hashed_expandable)
(dict_create_linear, dict_create_linear_expandable, dict_free)
(dict_add_symbol, dict_add_pending, dict_size, dict_empty):
Make functions static.
This patch builds on the previous by enabling the `new' multidictionary
API. A lot of the hunks are simply textual replacements of "dict_"
with "mdict_" and similar transformations.
A word of warning, even with the use of multidictionaries, the code
still does not satisfactorily fix the reported problems with gdb/23712
(or gdb/23010). We still have additional changes to make before that
happens.
gdb/ChangeLog:
PR gdb/23712
PR symtab/23010
* dictionary.h (struct dictionary): Replace declaration with
multidictionary.
(dict_create_hashed, dict_create_hashed_expandable)
(dict_create_linear, dict_create_linear_expandable)
(dict_free, dict_add_symbol, dict_add_pending, dict_empty)
(dict_iterator_first, dict_iterator_next, dict_iter_match_first)
(dict_iter_match_next, dict_size): Rename to "mdict_" versions
taking multidictionary argument.
[ALL_DICT_SYMBOLS]: Update for multidictionary.
* block.h (struct block) <dict>: Change to multidictionary
and rename `multidict'.
* block.c, buildsym.c, jit.c, mdebugread.c, objfiles.c,
symmisc.c: Update all dictionary references to multidictionary.
gdb/23712 is a new manifestation of the now-infamous (at least to me)
symtab/23010 assertion failure (DICT_LANGUAGE == SYMBOL_LANGAUGE).
An example of the problem (using test case from symtab/23010):
Reading symbols from /home/rdiez/rdiez/arduino/JtagDue/BuildOutput/JtagDue-obj-release/firmware.elf...done.
(gdb) p SysTick_Handler
dwarf2read.c:9715: internal-error: void dw2_add_symbol_to_list(symbol*, pending**): Assertion `(*listhead) == NULL || (SYMBOL_LANGUAGE ((*listhead)->symbol[0]) == SYMBOL_LANGUAGE (symbol))' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
This assertion was added specifically to catch this condition (of adding
symbols of different languages to a single pending list).
The problems we're now seeing on systems utilizing DWARF debugging seem to
be caused by the use of LTO, which adds a CU with an artificial DIE of
language C99 which references DIEs in other CUs of language C++.
Thus, we create a dictionary containing symbols of C99 but end up
stuffing C++ symbols into it, and the dw2_add_symbol_to_list triggers.
The approach taken here to fix this is to introduce multi-language
dictionaries to "replace" the standard, single-language dictionaries
used today.
Note to reviewers: This patch introduces some temporary functions to
aide with review. This and other artifacts (such as "See dictionary.h"
which appear incorrect) will all be valid at the end of the series.
This first patch introduces the new multidictionary and its API (which
is, by design, identical to the old dictionary interface). It also
mutates dict_create_hashed and dict_create_linear so that they take
a std::vector instead of the usual struct pending linked list. This will
be needed later on.
This patch does /not/ actually enable multidictionary's. That is left
for a subsequent patch in the series.
I've done exhaustive performance testing with this approach, and I've
attempted to minimize the overhead for the (overwhelmingly) most common
one-language scenario.
On average, a -g3 -O0 GDB (the one we developers use) will see
approximately a 4% slowdown when initially reading symbols. [I've
tested only GDB and firefox with -readnow.] When using -O2, this
difference shrinks to ~0.5%. Since a number of runs with these
patches actually run /faster/ than unpatched GDB, I conclude that
these tests have at least a 0.5% error margin.
On our own gdb.perf test suite, again, results appear to be pretty
negligible. Differences to unpatched GDB range from -7.8% (yes,
patched version is again faster than unpatched) to 27%. All tests
lying outside "negligible," such as the 27% slowdown, involve a total
run time of 0.0007 (or less) with smaller numbers of CUs/DSOs (usually 10
or 100). In all cases, the follow-up tests with more CUs/DSOs is never
more than 3% difference to the baseline, unpatched GDB.
In my opinion, these results are satisfactory.
gdb/ChangeLog:
PR gdb/23712
PR symtab/23010
* dictionary.c: Include unordered_map.
(pending_to_vector): New function.
(dict_create_hashed_1, dict_create_linear_1, dict_add_pending_1):
Rewrite the non-"_1" functions to take vector instead
of linked list.
(dict_create_hashed, dict_create_linear, dict_add_pending): Use the
"new" _1 versions of the same name.
(multidictionary): Define.
(std::hash<enum language): New definition.
(collate_pending_symbols_by_language, mdict_create_hashed)
(mdict_create_hashed_expandable, mdict_create_linear)
(mdict_create_linear_expandable, mdict_free)
(find_language_dictionary, create_new_language_dictionary)
(mdict_add_symbol, mdict_add_pending, mdict_iterator_first)
(mdict_iterator_next, mdict_iter_match_first, mdict_iter_match_next)
(mdict_size, mdict_empty): New functions.
* dictionary.h (mdict_iterator): Define.
Coverity points out that gdb/tracepoint.c:parse_tracepoint_definition
can leak 'cond' in this line:
cond = (char *) xmalloc (2 * xlen + 1);
That can leak because we're in a loop and 'cond' may have already been
xmalloc'ed into in a previous iteration. That won't normally happen,
because we don't expect to see a tracepoint definition with multiple
conditions listed, but, it doesn't hurt to be pedantically correct,
in case some stub manages to send something odd back to GDB.
At first I thought I'd just replace the xmalloc call with:
cond = (char *) xrealloc (cond, 2 * xlen + 1);
and be done with it. However, my pedantic self realizes that
warning() can throw as well (due to pagination + Ctrl-C), so I fixed
it using gdb::unique_xmalloc_ptr instead.
While doing this, I noticed that these vectors in struct uploaded_tp:
std::vector<char *> actions;
std::vector<char *> step_actions;
hold heap-allocated strings, but nothing is freeing the strings,
AFAICS.
So I ended up switching all the heap-allocated strings in uploaded_tp
to unique pointers. This patch is the result of that.
I also wrote an alternative, but similar patch that uses std::string
throughout instead of gdb::unique_xmalloc_ptr, but in the end reverted
it because the code didn't look that much better, and I kind of
dislike replacing pointers with fat std::string's (3 or 4 times the
size of a pointer) in structures.
gdb/ChangeLog:
2019-01-10 Pedro Alves <palves@redhat.com>
* breakpoint.c (read_uploaded_action)
(create_tracepoint_from_upload): Adjust to use
gdb::unique_xmalloc_ptr.
* ctf.c (ctf_write_uploaded_tp):
(SET_ARRAY_FIELD): Use emplace_back.
(SET_STRING_FIELD): Adjust to use gdb::unique_xmalloc_ptr.
* tracefile-tfile.c (tfile_write_uploaded_tp):
* tracepoint.c (parse_tracepoint_definition): Adjust to use
gdb::unique_xmalloc_ptr.
* tracepoint.h (struct uploaded_tp) <cond, actions, step_actions,
at_string, cond_string, cmd_strings>: Replace char pointers
with gdb::unique_xmalloc_ptr.
lm_info_target::name is nowadays std::string, so we're leaking the
result of xstrdup.
gdb/ChangeLog:
2019-01-10 Pedro Alves <palves@redhat.com>
* solib-target.c (library_list_start_library): Don't xstrdup name.
Coverity points out that all the "continue;" statements in the switch
case in parse_partial_symbols leak STABSTRING. This is because we
only release STABSTRING at the end of the scope, with:
if (stabstring
&& stabstring != debug_info->ss + fh->issBase + sh.iss)
xfree (stabstring);
but that bit of code is skipped if a case in the switch statement ends
with "continue".
Fix this by using gdb::unique_xmalloc_ptr to manage the heap-allocated
version of 'stabsstring'.
I don't know how to test this.
gdb/ChangeLog:
2019-01-10 Pedro Alves <palves@redhat.com>
* mdebugread.c (parse_partial_symbols): Use
gdb::unique_xmalloc_ptr to manage heap-allocated 'stabsstring'.
The previous commit:
commit 1ef8573cc7
Date: Wed Jan 9 14:02:39 2019 +0000
gdb: Improve scoped_switch_fork_info class
contained a bug, an incorrect variable name was used. Fixed in this
commit.
gdb/ChangeLog:
* linux-fork.c (scoped_switch_fork_info)
<~scoped_switch_fork_info>: Fix incorrect variable name.
After committing this patch I got this feedback:
https://sourceware.org/ml/gdb-patches/2019-01/msg00181.html
This patch makes the constructor of scoped_switch_fork_info explicit,
and wraps the core of the destructor in a TRY/CATCH block.
I've run this through the testsuite on X86-64/GNU Linux, however, this
code is not exercised, so this patch is untested.
gdb/ChangeLog:
* linux-fork.c (scoped_switch_fork_info)
<scoped_switch_fork_info>: Make explicit.
<~scoped_switch_fork_info>: Wrap core in TRY/CATCH.
Previously, the psymtab obstack was just a pointer to the objfile
obstack. This patch changes psymtabs to use their own obstack,
instead. A gdb::optional is used to avoid unnecessary allocation when
the obstack is not needed.
After this patch, the psymtab code lifetime model is that, in the core
psymtab code, objects allocated on the psymtab obstack may point to
other such objects, or to objects on the per-BFD obstack -- but never
to the objfile obstack.
Note however that this invariant is only obeyed the core psymtab code,
and even there not quite fully: there is still a link from the psymtab
to the full symtab.
Symbol readers are free to work however they like; and in particular,
even after this patch, in practice all symbol readers violate this
invariant via the read_symtab_private field.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* objfiles.h (objfile::reset_psymtabs): Update.
* objfiles.c (objfile::objfile): Update.
* psymtab.h (psymtab_storage::obstack): Update.
(psymtab_storage::m_obstack): Use gdb::optional.
(class psymtab_storage): Update comment. Remove objfile
parameter.
* psymtab.c (psymtab_storage::psymtab_storage): Update.
This adds a new psymtab allocation method to psymtab_storage and
changes the free_psymtabs member to be private. While not strictly
necessary, this seems like a decent cleanup, and also makes it simpler
to move psymtabs off of obstacks entirely, should that prove
desirable.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* psymtab.h (psymtab_storage::allocate_psymtab): New method.
<free_psymtabs>: Now private.
* psymtab.c (psymtab_storage::allocate_psymtab): Implement.
(allocate_psymtab): Use new method.
This adds a new method to psymtab_storage to allocate storage for
psymtab dependencies, then changes the symbol readers to use it. This
has the effect of moving the storage to the psymtab storage obstack.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_end_psymtab): Use allocate_dependencies.
* psymtab.h (psymtab_storage::allocate_dependencies): New method.
* mdebugread.c (parse_partial_symbols): Use
allocate_dependencies.
* dwarf2read.c (dwarf2_create_include_psymtab): Use
allocate_dependencies.
(process_psymtab_comp_unit_reader)
(build_type_psymtab_dependencies): Likewise.
* dbxread.c (dbx_end_psymtab): Use allocate_dependencies.
This moves a couple more psymtab-related allocations to the psymtab
obstack.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* psymtab.c (add_psymbol_to_bcache): Pass psymtab obstack to
PSYMBOL_SET_LANGUAGE.
(allocate_psymtab): Allocate psymtab on the psymtab obstack.
After this patch, the psymtab address map will now be allocated on the
psymtab obstack rather than the objfile obstack. This also changes
the psymtab storage object to make the obstack private; this will be
used later.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* psymtab.h (psymtab_storage::obstack): New method.
<m_obstack>: Rename from obstack; now private.
* psymtab.c (psymtab_storage): Update.
* dwarf2read.c (create_addrmap_from_index)
(create_addrmap_from_aranges, dwarf2_build_psymtabs_hard):
Update.
This introduces a new method, objfile::reset_psymtabs, and changes
reread_symbols to use it. This method simply destroys the existing
partial symbols and recreates the psymtab_storage object.
This patch fixes a latent bug -- namely, that reread_symbols should
clear objfile::psymbol_map, but does not. I can submit that
separately if you'd prefer.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* symfile.c (reread_symbols): Call objfile->reset_psymtabs.
* objfiles.h (objfile::reset_psymtabs): New method.
This introduces a new psymtab_storage class, which holds all
psymbol-related objects that are independent of the objfile. (This
latter contraint explains why psymbol_map was not moved; though this
could still be done with some work.)
This patch does not yet change where psymtab allocation is done --
that comes later. This just wraps everything in a single object to
make further transformations simpler.
Note that a shared_ptr is used to link from the objfile to the
psymtab_storage object. The end goal here is to allow a given symbol
reader to simply attach to the psymtab_storage object to the BFD, then
reuse it in later invocations; shared_ptr makes this simple to reason
about.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* symmisc.c (print_symbol_bcache_statistics): Update.
(print_objfile_statistics): Update.
* symfile.c (reread_symbols): Update.
* psymtab.h (class psymtab_storage): New.
* psymtab.c (psymtab_storage): New constructor.
(~psymtab_storage): New destructor.
(require_partial_symbols): Update.
(ALL_OBJFILE_PSYMTABS_REQUIRED): Rewrite.
(find_pc_sect_psymtab, find_pc_sect_psymbol)
(match_partial_symbol, lookup_partial_symbol, dump_psymtab)
(psym_dump, recursively_search_psymtabs, psym_has_symbols)
(psym_find_compunit_symtab_by_address, sort_pst_symbols)
(start_psymtab_common, end_psymtab_common)
(add_psymbol_to_bcache, add_psymbol_to_list, init_psymbol_list)
(allocate_psymtab): Update.
(psymtab_storage::discard_psymtab): Rename from discard_psymtab.
Update.
(dump_psymtab_addrmap, maintenance_print_psymbols)
(maintenance_check_psymtabs): Update.
(class objfile_psymtabs): Move to objfiles.h.
* psympriv.h (discard_psymtab): Now inline.
(psymtab_discarder::psymtab_discarder): Update.
(psymtab_discarder::~psymtab_discarder): Update.
(ALL_OBJFILE_PSYMTABS): Rewrite.
* objfiles.h (struct objfile) <psymtabs, psymtabs_addrmap,
free_psymtabs, psymbol_cache, global_psymbols, static_psymbols>:
Remove fields.
<partial_symtabs>: New field.
(class objfile_psymtabs): Move from psymtab.h. Update.
* objfiles.c (objfile::objfile): Initialize partial_symtabs, not
psymbol_cache.
(objfile::~objfile): Don't destroy psymbol_cache.
* mdebugread.c (parse_partial_symbols): Update.
* dwarf2read.c (create_addrmap_from_index)
(create_addrmap_from_aranges, dw2_find_pc_sect_compunit_symtab)
(process_psymtab_comp_unit_reader, dwarf2_build_psymtabs_hard)
(add_partial_subprogram, dwarf2_ranges_read): Update.
* dwarf-index-write.c (write_address_map)
(write_one_signatured_type, recursively_write_psymbols)
(class debug_names, class debug_names, write_psymtabs_to_index):
Update.
This changes symbol_set_names to take an objfile_per_bfd_storage
argument, and updates the users. It also changes PSYMBOL_SET_NAMES to
take this argument directly; I feel this clarifies the storage
location of objects created in psymtab.c.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* symtab.h (SYMBOL_SET_NAMES): Update.
(symbol_set_names): Update.
(MSYMBOL_SET_NAMES): Update.
* symtab.c (symbol_set_names): Change argument to be an
objfile_per_bfd_storage.
* psymtab.c (add_psymbol_to_bcache): Update.
* psympriv.h (PSYMBOL_SET_NAMES): Take per_bfd argument.
This changes create_demangled_names_hash to take an
objfile_per_bfd_storage parameter. This makes it clearer where it is
storing the objects it allocates.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* symtab.c (create_demangled_names_hash): Change argument to be an
objfile_per_bfd_storage.
(symbol_set_names): Update.
Existing callers to init_psymbol_list were checking to see if psymbols
had already been initialized. It seemed better to me to do this check
directly in init_psymbol_list, simplifying the callers.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_initial_scan): Unconditionally call
init_psymbol_list.
* psymtab.c (init_psymbol_list): Do nothing if already called.
* psympriv.h (init_psymbol_list): Add comment.
* dwarf2read.c (dwarf2_build_psymtabs): Unconditionally call
init_psymbol_list.
* dbxread.c (dbx_symfile_read): Unconditionally call
init_psymbol_list.
This changes add_psymbol_to_list to use an enum, rather than a pointer
to a vector, to decide where to put the new symbol. This reduces the
number of direct references to the static_psymbols and global_psymbols
members of the objfile, which is handy in a later patch.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* xcoffread.c (scan_xcoff_symtab): Update.
* psymtab.c (add_psymbol_to_list): Replace "list" parameter with
"where".
* mdebugread.c (parse_partial_symbols)
(handle_psymbol_enumerators): Update.
* dwarf2read.c (add_partial_symbol, load_partial_dies): Update.
* dbxread.c (read_dbx_symtab): Update.
* psympriv.h (psymbol_placement): New enum.
(add_psymbol_to_list): Update.
start_psymtab_common takes references to the global_psymbols and
static_psymbols vectors, but it also has an objfile parameter. This
is redundant, so this patch simplifies the function by removing those
reference parameters.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_start_psymtab): Remove global_psymbols and
static_psymbols parameters.
(scan_xcoff_symtab): Update.
* psymtab.c (start_psymtab_common): Remove global_psymbols and
static_psymbols parameters.
* psympriv.h (start_psymtab_common): Update.
* mdebugread.c (parse_partial_symbols): Update.
* dwarf2read.c (create_partial_symtab): Update.
* dbxread.c (read_dbx_symtab): Update.
(start_psymtab): Remove global_psymbols and static_psymbols
parameters.
allocate_psymtab has long cleared the new psymtab that is returned.
This patch documents this behavior and then removes some redundant
initializations.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_end_psymtab): Remove some initializations.
* psymtab.c (allocate_psymtab): Add comment.
* psympriv.h (allocate_psymtab): Add comment.
* dwarf2read.c (dwarf2_create_include_psymtab): Remove some
initializations.
* dbxread.c (dbx_end_psymtab): Remove some initializations.
This moves a couple of mdebugread-related declarations from symfile.h
to mdebugread.h, which seemed more appropriate.
gdb/ChangeLog
2019-01-10 Tom Tromey <tom@tromey.com>
* symfile.h (mdebug_build_psymtabs, elfmdebug_build_psymtabs):
Don't declare.
* mipsread.c: Include mdebugread.h.
* mdebugread.h (mdebug_build_psymtabs, elfmdebug_build_psymtabs):
Declare.
* elfread.c: Include mdebugread.h.
This removes the ALL_OBJSECTIONS macro, replacing its uses with ranged
for loops.
The special code in this macro for noticing a "break" from the inner
loop was only needed in a single place; so rather than try to
replicate this, I've simply replaced that use with a "goto".
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symfile.c (overlay_invalidate_all, find_pc_overlay)
(find_pc_mapped_section, list_overlays_command)
(map_overlay_command, unmap_overlay_command)
(simple_overlay_update): Use all_objfiles.
* spu-tdep.c (spu_overlay_update): Use all_objfiles.
* printcmd.c (info_symbol_command): Use all_objfiles.
* objfiles.h (ALL_OBJSECTIONS): Remove.
* maint.c (maintenance_translate_address): Use all_objfiles.
* gcore.c (gcore_create_callback): Use all_objfiles.
(objfile_find_memory_regions): Likewise.
This removes the ALL_OBJFILES and ALL_FILETABS macros, replacing them
with ranged for loops.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (find_line_symtab, info_sources_command)
(make_source_files_completion_list): Use objfile_compunits.
* source.c (select_source_symtab): Use objfile_compunits.
* objfiles.h (struct objfile): Update comment.
(ALL_OBJFILES): Remove.
(ALL_FILETABS): Remove.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Use
objfile_compunits.
This removes ALL_OBJFILE_FILETABS, replacing its uses with ranged for
loops.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symmisc.c (print_objfile_statistics, dump_objfile)
(maintenance_print_symbols): Use compunit_filetabs.
* source.c (forget_cached_source_info_for_objfile): Use
compunit_filetabs.
* objfiles.h (ALL_OBJFILE_FILETABS): Remove.
(ALL_FILETABS): Use compunit_filetabs.
* objfiles.c (objfile_relocate1): Use compunit_filetabs.
* coffread.c (coff_symtab_read): Use compunit_filetabs.
This removes ALL_COMPUNIT_FILETABS, replacing its uses with ranged for
loops.
Because this is still used in the ALL_OBJFILE_FILETABS macro, in some
places a declaration had to be removed or renamed to avoid shadowing.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.h (ALL_COMPUNIT_FILETABS): Remove.
(compunit_filetabs): New.
* symtab.c (iterate_over_some_symtabs, find_pc_sect_line): Use
compunit_filetabs.
(info_sources_command, make_source_files_completion_list): Remove
declaration.
* symmisc.c (print_objfile_statistics, dump_objfile)
(maintenance_print_symbols): Remove declaration.
(maintenance_info_symtabs): Use compunit_filetabs.
(maintenance_info_line_tables): Likewise.
* source.c (select_source_symtab): Change local variable name.
(forget_cached_source_info_for_objfile): Remove declaration.
* objfiles.h (ALL_OBJFILE_FILETABS): Use compunit_filetabs.
* objfiles.c (objfile_relocate1): Remove declaration.
* mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_files): Remove
declaration.
* maint.c (count_symtabs_and_blocks): Use compunit_filetabs.
* coffread.c (coff_symtab_read): Remove declaration.
* buildsym.c (buildsym_compunit::end_symtab_with_blockvector): Use
compunit_filetabs.
This removes the ALL_COMPUNITS, replacing its uses with two nested
ranged for loops.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (lookup_objfile_from_block)
(find_pc_sect_compunit_symtab, search_symbols)
(default_collect_symbol_completion_matches_break_on): Use
objfile_compunits.
* objfiles.h (ALL_COMPUNITS): Remove.
* maint.c (count_symtabs_and_blocks): Use objfile_compunits.
* cp-support.c (add_symbol_overload_list_qualified): Use
objfile_compunits.
* ada-lang.c (ada_collect_symbol_completion_matches)
(ada_add_global_exceptions): Use objfile_compunits.
This removes the ALL_MSYMBOLS and ALL_OBJFILE_MSYMBOLS macros,
replacing their uses with ranged for loops.
In a couple of spots, a new declaration was needed in order to work
around shadowing; these are just temporary and are removed in a
subsequent patch.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (search_symbols)
(default_collect_symbol_completion_matches_break_on): Use
objfile_msymbols.
* ada-lang.c (ada_lookup_simple_minsym)
(ada_collect_symbol_completion_matches): Use objfile_msymbols.
* minsyms.c (find_solib_trampoline_target): Use objfile_msymbols.
* hppa-tdep.c (hppa_lookup_stub_minimal_symbol): Use
objfile_msymbols.
* coffread.c (coff_symfile_read): Use objfile_msymbols.
* symmisc.c (dump_msymbols): Use objfile_msymbols.
* objc-lang.c (find_methods): Use objfile_msymbols.
(info_selectors_command, info_classes_command): Likewise.
* stabsread.c (scan_file_globals): Use objfile_msymbols.
* objfiles.h (class objfile_msymbols): New.
(ALL_OBJFILE_MSYMBOLS): Remove.
(ALL_MSYMBOLS): Remove.
This removes most uses of ALL_OBJFILES, replacing them with ranged for
loops. The remaining uses are all in macros, and will be removed in
subsequent patches.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* symtab.c (iterate_over_symtabs, matching_obj_sections)
(expand_symtab_containing_pc, lookup_static_symbol)
(basic_lookup_transparent_type, find_pc_sect_compunit_symtab)
(find_symbol_at_address, find_line_symtab, find_main_name): Use
all_objfiles.
* probe.c (find_probe_by_pc, collect_probes): Use all_objfiles.
* breakpoint.c (create_overlay_event_breakpoint)
(create_longjmp_master_breakpoint)
(create_std_terminate_master_breakpoint)
(create_exception_master_breakpoint): Use all_objfiles.
* linux-thread-db.c (try_thread_db_load_from_pdir)
(has_libpthread): Use all_objfiles.
* ada-lang.c (add_nonlocal_symbols): Use all_objfiles.
* linespec.c (iterate_over_all_matching_symtabs)
(search_minsyms_for_name): Use all_objfiles.
* maint.c (maintenance_info_sections): Use all_objfiles.
* main.c (captured_main_1): Use all_objfiles.
* spu-tdep.c (spu_objfile_from_frame): Use all_objfiles.
* guile/scm-objfile.c (gdbscm_objfiles): Use all_objfiles.
* guile/scm-pretty-print.c
(ppscm_find_pretty_printer_from_objfiles): Use all_objfiles.
* solib-spu.c (append_ocl_sos): Use all_objfiles.
* symmisc.c (maintenance_print_symbols): Use all_objfiles.
(maintenance_print_msymbols): Use all_objfiles.
* source.c (select_source_symtab): Use all_objfiles.
* jit.c (jit_find_objf_with_entry_addr): Use all_objfiles.
* symfile.c (remove_symbol_file_command)
(expand_symtabs_matching, map_symbol_filenames): Use
all_objfiles.
* ppc-linux-tdep.c (ppc_linux_spe_context_inferior_created): Use
all_objfiles.
* dwarf2-frame.c (dwarf2_frame_find_fde): Use all_objfiles.
* objc-lang.c (find_methods): Use all_objfiles.
* objfiles.c (have_partial_symbols, have_full_symbols)
(have_minimal_symbols, qsort_cmp)
(default_iterate_over_objfiles_in_search_order): Use
all_objfiles.
* hppa-tdep.c (find_unwind_entry): Use all_objfiles.
* psymtab.c (maintenance_print_psymbols): Use all_objfiles.
(maintenance_check_psymtabs): Use all_objfiles.
(ALL_PSYMTABS): Remove.
* compile/compile-object-run.c (do_module_cleanup): Use
all_objfiles.
* blockframe.c (find_pc_partial_function): Use all_objfiles.
* cp-support.c (add_symbol_overload_list_qualified): Use
all_objfiles.
* windows-tdep.c (windows_iterate_over_objfiles_in_search_order):
Use all_objfiles.
* dwarf-index-write.c (save_gdb_index_command): Use all_objfiles.
* python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): Use
all_objfiles.
* python/py-objfile.c (objfpy_lookup_objfile_by_name)
(objfpy_lookup_objfile_by_build_id): Use all_objfiles.
* python/py-prettyprint.c (find_pretty_printer_from_objfiles):
Uses all_objfiles.
* solib.c (solib_read_symbols): Use all_objfiles
This removes the ALL_PSPACE_OBJFILES macro in favor of ranged for
loops.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* probe.c (parse_probes_in_pspace): Use all_objfiles.
* guile/scm-progspace.c (gdbscm_progspace_objfiles): Use
all_objfiles.
* objfiles.h (ALL_PSPACE_OBJFILES): Remove.
* symmisc.c (print_symbol_bcache_statistics)
(print_objfile_statistics, maintenance_print_objfiles)
(maintenance_info_symtabs, maintenance_check_symtabs)
(maintenance_expand_symtabs, maintenance_info_line_tables): Use
all_objfiles.
* source.c (forget_cached_source_info): Use all_objfiles.
* symfile-debug.c (set_debug_symfile): Use all_objfiles.
* elfread.c (elf_gnu_ifunc_resolve_by_cache)
(elf_gnu_ifunc_resolve_by_got): Use all_objfiles.
* objfiles.c (update_section_map): Use all_objfiles.
(shared_objfile_contains_address_p): Likewise.
* psymtab.c (maintenance_info_psymtabs): Use all_objfiles.
* python/py-progspace.c (pspy_get_objfiles): Use all_objfiles.
This introduces an iterable object which can be used to iterate over
objfiles. It also introduces a generic "next_iterator", which can be
used to iterate over types that have a "next" field.
gdb/ChangeLog
2019-01-09 Tom Tromey <tom@tromey.com>
* common/next-iterator.h: New file.
* objfiles.h (class all_objfiles): New.
(struct objfile_iterator): New.
2019-01-09 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* NEWS: Move the description of the changed "frame", "select-frame",
and "info frame" commands to the Changed commands section.
An upcoming sync with gcc's libiberty [1] will remove support for old
mangling schemes (GNU v2, Lucid, ARM, HP and EDG). It will remove the
cplus_demangle_opname function, so we need to get rid of its usages in
GDB (it's a GNU v2 specific function).
I think the changes are mostly relatively obvious, some hacks that were
necessary to support overloaded operators with GNU v2 mangling are not
needed anymore.
The change in stabsread.c is perhaps less obvious. I think we could get
rid of more code in that region that is specific to old mangling
schemes, but I chose to do only the minimal changes required to remove
the cplus_demangle_opname uses. There is also a detailed comment just
above that explaining how GNU v2 and v3 mangled symbols are handled, I
decided to leave it as-is, since I wasn't sure which part to remove,
change or leave there.
[1] The commit "Remove support for demangling GCC 2.x era mangling
schemes.", specifically.
gdb/ChangeLog:
* gdbtypes.c (check_stub_method_group): Remove handling of old
mangling schemes.
* linespec.c (find_methods): Likewise.
* stabsread.c (read_member_functions): Likewise.
* valops.c (search_struct_method): Likewise.
(value_struct_elt_for_reference): Likewise.
* NEWS: Mention this change.
gdb/testsuite/ChangeLog:
* gdb.cp/demangle.exp (test_gnu_style_demangling): Rename to...
(test_gnuv3_style_demangling): ... this.
(test_lucid_style_demangling): Remove.
(test_arm_style_demangling): Remove.
(test_hp_style_demangling): Remove.
(do_tests): Remove calls to the above.
gdb/doc/ChangeLog:
* gdb.texinfo (Print Settings): Remove mention of specific
demangle-style values, just refer to the in-process help.
When printing source lines with calls to print_source_lines we need to
pass a start line number and an end line number. The end line number
is calculated by calling get_lines_to_list and adding this value to
the start line number. For example this code from list_command:
print_source_lines (cursal.symtab, first,
first + get_lines_to_list (), 0);
The problem is that get_lines_to_list returns a value based on the
GDB setting `set listsize LISTSIZE`. By default LISTSIZE is 10,
however, its also possible to set LISTSIZE to unlimited, in which
case get_lines_to_list will return INT_MAX.
As the parameter signature for print_source_lines is:
void print_source_lines (struct symtab *, int, int,
print_source_lines_flags);
and `first` in the above code is an `int`, then when LISTSIZE is
`unlimited` the above code will result in signed integer overflow,
which is undefined.
The solution in this patch is a new class source_lines_range that can
be constructed from a single line number and a direction (forward or
backward). The range is then constructed from the line number and the
value of get_lines_to_list.
gdb/ChangeLog:
* cli/cli-cmds.c (list_command): Pass a source_lines_range to
print_source_lines.
* source.c (print_source_lines_base): Update line number check.
(print_source_lines): New function.
(source_lines_range::source_lines_range): New function.
* source.h (class source_lines_range): New class.
(print_source_lines): New declaration.
Tom Tromey
Pedro Franco de Carvalho
Max Filippov
Philippe Waroquiers
Joel Brobecker
Andrew Burgess
Keith Seitz
Pedro Alves
Simon Marchi