* d10v-tdep.c (d10v_store_return_value): Char return values
must be shifted over by one byte in R0.
(d10v_extract_return_value): Delete extra braces, re-indent.
* d10v-tdep.c (d10v_read_sp, d10v_read_fp): Add prototype.
(d10v_register_virtual_type): Make $fp and $sp be pointer to data.
(d10v_integer_to_address): Rewrite.
(d10v_frame_init_saved_regs): When reading fp and sp registers use
the d10v specific functions which take care of converting to the
correct space.
* Makefile.in (sim_regno_h): Define.
(d10v-tdep.o, remote-sim.o): Add dependency on $(sim_regno_h).
* remote-sim.c: Include "sim-regno.h" and "gdb_assert.h".
(legacy_register_sim_regno): New function.
(one2one_register_sim_regno): New function.
(gdbsim_fetch_register): Rewrite.
(gdbsim_store_register): Only store a register when
REGISTER_SIM_REGNO is valid.
* d10v-tdep.c: Include "sim-regno.h".
(d10v_ts2_register_sim_regno): Add legacy_regiter_sim_regno check.
(d10v_ts3_register_sim_regno): Ditto.
* gdbarch.sh: Include "sim-regno.h".
(REGISTER_SIM_REGNO): Set default to legacy_register_sim_regno.
* gdbarch.h, gdbarch.c: Regenerate.
* arch-utils.h (default_register_sim_regno): Delete declaration.
* arch-utils.c (default_register_sim_regno): Delete function.
* sim-d10v.h: New file. Moved from include/sim-d10v.h.
* Makefile.in (INCLUDE): Add "gdb/sim-d10v.h".
* interp.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h".
* d10v-tdep.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h".
* Makefile.in (sim_d10v_h): Update definition.
* d10v-tdep.c: Change a few macros to enums for ease of debugging.
(d10v_frame_chain_valid): Add PC_IN_CALL_DUMMY clause.
(d10v_frame_saved_pc): Add PC_IN_CALL_DUMMY clause.
(d10v_frame_chain): Bail immediately if PC_IN_CALL_DUMMY.
Don't bail if return_pc is PC_IN_CALL_DUMMY.
Add a temp variable to save a call (and a memory read).
(d10v_init_extra_frame_info): Get fi->pc from callee's return_pc
if possible (so that PC_IN_CALL_DUMMY will work).
* dwarf2cfi.c (cfi_write_fp): Document as not used.
* mips-tdep.c (mips_gdbarch_init): Do not set write_fp.
* ia64-tdep.c (ia64_gdbarch_init): Do not set write_fp.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Do not set write_fp.
* rs6000-tdep.c (rs6000_gdbarch_init): Do not set write_fp.
* s390-tdep.c (s390_gdbarch_init): Do not set write_fp.
(s390_write_fp):
* sh-tdep.c (sh_gdbarch_init): Do not set write_fp.
* x86-64-tdep.c (i386_gdbarch_init): Do not set write_fp.
* d10v-tdep.c (d10v_gdbarch_init): Do not set write_fp.
(d10v_write_fp): Delete function.
* inferior.h (write_fp, generic_target_write_fp): Delete
declarations.
* regcache.c (generic_target_write_fp): Delete function.
(write_fp): Delete function.
* gdbarch.sh (TARGET_WRITE_FP): Delete.
* gdbarch.h, gdbarch.c: Regenerate.
* config/v850/tm-v850.h (TARGET_WRITE_FP): Delete macro.
* config/sparc/tm-sp64.h (TARGET_WRITE_FP): Delete macro.
(sparc64_write_fp): Delete declaration.
* config/h8500/tm-h8500.h (TARGET_WRITE_FP): Delete macro.
(h8500_write_fp): Delete declaration.
(warning_begin): Delete declaration.
* utils.c (vwarning): New function.
(warning): Call vwarning.
(warning_begin): Delete function.
* rs6000-nat.c (vmap_ldinfo): Use the function warning to print
the warning message.
* d10v-tdep.c (d10v_address_to_pointer) [0]: Delete call to
warning_begin.
* MAINTAINERS (write-after-approval): Add self.
* d10v-tdep.c (d10v_gdbarch_init): Change size of long long to 8 bytes.
From Andrew Cagney <cagney@redhat.com>:
* d10v-tdep.c (d10v_frame_chain_valid): Check if the caller's PC
is in the entry function.
(d10v_use_struct_convention): Store multi-field struct and union
return values on the stack.
* d10v-tdep.c (d10v_pointer_to_address): Use new type flag
TYPE_FLAG_CODE_SPACE to recognize a pointer that has been cast
into the instruction address space.
* Makefile.in (doublest.o): Add dependency on gdbtypes.h.
longer disagree on how big pointers are.
* findvar.c (value_from_register): Remove special case code for D10V.
* printcmd.c (print_frame_args): Same.
* valops.c (value_at, value_fetch_lazy): Same.
* values.c (unpack_long): Same.
* gdbarch.sh: Changes to effect the following:
* gdbarch.h (GDB_TARGET_IS_D10V, D10V_MAKE_DADDR,
gdbarch_d10v_make_daddr_ftype, gdbarch_d10v_make_daddr,
set_gdbarch_d10v_make_daddr, D10V_MAKE_IADDR,
gdbarch_d10v_make_iaddr_ftype, gdbarch_d10v_make_iaddr,
set_gdbarch_d10v_make_iaddr, D10V_DADDR_P,
gdbarch_d10v_daddr_p_ftype, gdbarch_d10v_daddr_p,
set_gdbarch_d10v_daddr_p, D10V_IADDR_P,
gdbarch_d10v_iaddr_p_ftype, gdbarch_d10v_iaddr_p,
set_gdbarch_d10v_iaddr_p, D10V_CONVERT_DADDR_TO_RAW,
gdbarch_d10v_convert_daddr_to_raw_ftype,
gdbarch_d10v_convert_daddr_to_raw,
set_gdbarch_d10v_convert_daddr_to_raw, D10V_CONVERT_IADDR_TO_RAW,
gdbarch_d10v_convert_iaddr_to_raw_ftype,
gdbarch_d10v_convert_iaddr_to_raw,
set_gdbarch_d10v_convert_iaddr_to_raw): Delete declarations.
* gdbarch.c: Delete the corresponding definitions.
(struct gdbarch): Delete members d10v_make_daddr,
d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
d10v_convert_daddr_to_raw, and d10v_convert_iaddr_to_raw.
(startup_gdbarch): Remove initializers for the above.
(verify_gdbarch, gdbarch_dump): Don't verify or dump them any
more.
* d10v-tdep.c (d10v_register_virtual_type): Rather that
claiming the stack pointer and PC are 32 bits long (which they
aren't), say that the stack pointer is an int16_t, and the
program counter is a function pointer. This allows the rest
of GDB to make the appropriate conversions between the code
pointer format and real addresses.
(d10v_register_convertible, d10v_register_convert_to_virtual,
d10v_register_convert_to_raw): Delete function; no registers
are convertible now, so we use
generic_register_convertible_not instead.
(d10v_address_to_pointer, d10v_pointer_to_address): New gdbarch
methods.
(d10v_push_arguments, d10v_extract_return_value): Remove special
cases for code and data pointers.
(d10v_gdbarch_init): Set gdbarch_ptr_bit to 16, so that GDB and
the target agree on how large pointers are. Say that addresses
are 32 bits long. Register the address_to_pointer and
pointer_to_address conversion functions. Since no registers are
convertible now, register generic_register_convertible_not as the
gdbarch_register_convertible method instead of
d10v_register_convertible. Remove registrations for
d10v_register_convert_to_virtual,
d10v_register_convert_to_raw, gdbarch_d10v_make_daddr,
gdbarch_d10v_make_iaddr, gdbarch_d10v_daddr_p,
gdbarch_d10v_iaddr_p, gdbarch_d10v_convert_daddr_to_raw, and
gdbarch_d10v_convert_iaddr_to_raw.
show_regs, d10v_read_pc, d10v_write_pc, d10v_read_sp,
d10v_write_sp, d10v_write_fp, d10v_read_fp,
d10v_push_return_address): Call the functions d10v_make_daddr,
d10v_make_iaddr, d10v_convert_iaddr_to_raw, and
d10v_convert_daddr_to_raw, not the global macros D10V_MAKE_DADDR,
D10V_MAKE_IADDR, D10V_CONVERT_IADDR_TO_RAW, and
D10V_CONVERT_DADDR_TO_RAW.
D10V_CONVERT_DADDR_TO_RAW): Define.
* d10v-tdep.c (d10v_push_arguments): Re-write. Pass arguments in
registers, regardless of their size, when they fit.
o Fix code assuming that host/target were both bigendian.
o Replace d10v push dummy frame code with version using new common
generic generic version.
o Find/fix more cases where a value needs to be translated to/from
instruction (IMAP) or data (DMAP) spaces.
(TARGET_READ_FP): Define to d10v_read_fp rather than d10v_read_sp.
(TARGET_WRITE_FP): Define to d10v_write_fp rather than d10v_write_sp.
(d10v_write_fp, d10v_read_fp): Add prototypes.
* symtab.c (decode_line_1): Remove assignment of sals[0].pc field.
* symfile.c (simple_overlay_update, simple_overlay_update_1):
Ignore the size of overlay sections. This check is redundant anyway.
* printcmd.c (print_frame_args): Ditto.
* valops.c (value_fetch_lazy): Ditto.
* values.c (unpack_long): Ditto.
* d10v-tdep.c (d10v_frame_chain, d10v_frame_find_saved_regs,
d10v_init_extra_frame_info): Fix some minor bugs so the finish command
works properly.
(show_regs): Change num1 and num2 types from "long long" to "LONGEST".
(d10v_read_fp, d10v_write_fp): New functions.
(d10v_push_arguments): Remove unneeded assigns to "val" and "contents".
(d10v_push_arguments): Fix for pointers and structs.
(d10v_extract_return_value): Fix for pointers and chars.
globals.
(remote_resume, remote_wait): Use them.
* d10v-tdep.c: Set the above hooks.
(tracesource): New GDB variable, controls source display in
traces.
(display_trace): Find and display source line if requested.
(trace_info): Mention empty trace buffer if appropriate.
(tdisassemble_command): Robustify argument handling.
* infcmd.c (do_registers_info): Call val_print with the
virtual buf instead of the raw buf. Needed for REGISTER_CONVERT
to work with non-floating point regs.
start-sanitize-d10v
* d10v-tdep.c (d10v_skip_prologue): If we have line debugging
information, then the end of the prologue should the first
assembly instruction of the first source line.
* values.c (value_from_longest): Put in D10V call to
fix up address pointers.
* config/d10v/tm-d10v.h (REGISTER_VIRTUAL_SIZE): Modified.
(REGISTER_VIRTUAL_TYPE): Modified for PC_REGNUM and SP_REGNUM.
(REGISTER_CONVERTIBLE): Make PC and SP convertible.
(REGISTER_CONVERT_TO_VIRTUAL): Define.
(REGISTER_CONVERT_TO_RAW): Define.
(D10V_MAKE_DADDR): Define.
(D10V_MAKE_IADDR): Define.
end-sanitize-d10v
* d10v-tdep.c: Fix some problems with inferior function calls.
* config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Change dummy to be
a pointer to the dummy's stack instead of just a flag.
Andrew Cagney
Michael Snyder
Elena Zannoni
Daniel Jacobowitz
Jackie Smith Cashion
Fred Fish
Jim Blandy
Kevin Buettner
David Anderson
Jason Molenda
Stan Shebs
Martin Hunt