* config/i386/tm-i386.h: treat PC and FP as unsigned.
(SAVED_PC_AFTER_CALL): Use read_memory_unsigned_integer.
(FRAME_SAVED_PC): Ditto.
(FRAME_CHAIN): Ditto.
(FIX_CALL_DUMMY): Redefined to call i386_fix_call_dummy.
(i386_fix_call_dummy): Add prototype.
* i386-tdep.c (i386_fix_call_dummy): New function based on the
code from the old FIX_CALL_DUMMY macro.
* config/i386/tm-embed.h: New file. Specific for embedded targets
like i386-elf, i386-coff and i386-aout.
* config/i386/embed.mt (): Specify tm-embed.h instead of the System V
header file.
before deleting and restoring it.
(safe_symbol_file_add): Ensure that gdb_stderr is flushed before reassigning
it.
(handle_load_dll): Split into two functions so that WFI can handle shared
library events.
(child_solib_loaded_library_pathname): New function.
(child_clear_solibs): New function. Clears shared library list.
(child_solib_add): New function. Adds shared library symbols.
(dll_symbol_command): New function. Handles "dll-symbol" command.
(info_dll_command): New function. Handles info "sharedlibrary" command.
(handle_exceptions): Eliminate 'ignore_trap' argument.
(get_child_debug_event): Eliminate two arguments. Return "pid" when
appropriate. Break out on most events to allow WFI to handle stuff.
(child_wait): Accomodate get_child_debug_event changes.
(child_attach): Clear thread list and list of loaded dlls.
(child_create_inferior): Clear list of loaded dlls. Use wait_for_inferior in a
loop to look for first "trap".
(child_resume): Avoid accessing a possibly-freed thread pointer.
(_initialize_inftarg): Add "dll-symbols", "sharedlibrary", and "info
dll", and "info sharedlibrary" commands.
* config/i386/tm-cygwin.h: Add some shared library (aka DLL) hooks.
* config/i386/nbsdelf.mt: New file.
* config/i386/tm-nbsdelf.h: New file.
* config/i386/tm-nbsd.h: change include of tm-nbsd.h to
the more explicit config/tm-nbsd.h.
and i[3456]86-*-netbsdelf*.
* config/i386/nm-nbsdelf.h: New file.
* config/i386/nbsdelf.mh: New file.
* config/i386/nm-nbsd.h: change include of nm-nbsd.h to
the more explicit config/nm-nbsd.h.
* config/i386/tm-nbsd.h: change include of tm-i386bsd.h to
tm-i386.h.
(SIGTRAMP_START, SIGTRAMP_END, SIGCONTEXT_PC_OFFSET): Define.
-------------------------------------------------------------------
* gdbarch.sh (IEEE_FLOAT): New entry.
* gdbarch.c, gdbarch.h: Regenerated.
* valprint.c (IEEE_FLOAT): Provide a default #definition for this.
(print_floating): Use IEEE_FLOAT as if it were an expression; use
the code specific to IEEE-format numbers whenever the value of
IEEE_FLOAT is non-zero.
* config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
config/arc/tm-arc.h, config/arm/tm-arm.h, config/fr30/tm-fr30.h,
config/h8300/tm-h8300.h, config/i386/tm-i386.h,
config/i960/tm-i960.h, config/m88k/tm-m88k.h,
config/mips/tm-mips.h, config/pa/tm-hppa.h,
config/sparc/tm-sparc.h, config/delta/tm-delta.h,
config/frv/tm-frv.h (IEEE_FLOAT): For all ports that #define
IEEE_FLOAT, make sure they give it the value (1).
* config/i386/tm-i386sol2.h (HAVE_I387_REGS): Define.
* i386v4-nat.c (supply_fpregset, fill_fpregset): Add code
to handle floating point registers if NUM_FREGS is not zero.
Change to rely on PIDGET etc.
* config/i386/nm-i386sol2.h (TARGET_HAS_WATCHPOINTS,
TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT,
STOPPED_BY_WATCHPOINT, target_[insert/remove]_watchpoint):
define. Allow target to use procfs hardware watchpoints.
* config/sparc/nm-sun4sol2.h: ditto.
* config/i386/tm-i386sol2.h (PIDGET, TIDGET, MERGEPID): modify
definitions to use 16 bits for the pid, 15 bits for the tid, and
1 bit for the flag.
* config/sparc/tm-sun4sol2.h: ditto.
(SOFTWARE_SINGLE_STEP, SOFTWARE_SINGLE_STEP_P): undefine.
* testsuite/gdb.threads/pthreads.exp (all_threads_running): Allow
for more than 15 thread increments.
* config/i386/tm-go32.h (TARGET_LONG_DOUBLE_BIT): Remove
definition (and use the common one in tm-i386.h).
(REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Likewise.
(I386_DJGPP_TARGET): Don't define, it's no longer required.
(LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): Remove definition,
i386-tdep.c defines it for all x86 targets.
(LD_I387, HEX_LONG_DOUBLE_INPUT): Remove.
* config/djgpp/fnchange.lst: Add i386-linux-tdep.c.
* config/djgpp/djcheck.sh: Edit the copyright year out of the test
results. Fix editing of `main' arguments for non-GNU Sed.
* config/i386/tm-i386aix.h (I386_AIX_TARGET): Remove.
* config/i386/tm-linux.h (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM):
Remove
* i386-tdep.c (LOW_RETURN_REGNUM, HIGH_RETURN_REGNUM): New defines.
(i386_extract_return_value): Rewritten. Correctly support all
floating-point types and large integer types on targets that use
the standard i386 GDB register layout and return floating-point
values in the FPU.
(LINUX_SIGTRAMP_INSN0, LINUX_SIGTRAMP_OFFSET0,
LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
i386_linux_sigtramp_saved_sp): Deleted. Folks rightly pointed
out that these are target-dependent, and useful in non-native
configurations. Moved to...
* i386-linux-tdep.c: ... Here, a new file.
* Makefile.in (ALLDEPFILES): Add i386-linux-tdep.c.
(i386-linux-tdep.o): New rule.
(i386-linux-nat.o): We no longer depend on frame.h.
* config/i386/linux.mt (TDEPFILES): Add i386-linux-tdep.o.
* event-loop.c (top-level) [NO_FD_SET]: Deprecate this branch.
Print an error at compile time if we are to use select, but FD_SET
is not available.
(SELECT_MASK, NBBY, FD_SETSIZE, NFDBITS, MASK_SIZE): Define only
if HAVE_POLL is not defined and NO_FD_SET *is* defined.
(create_file_handler) [!HAVE_POLL]: Use FD_SET and FD_CLR.
(delete_file_handler) [!HAVE_POLL]: Use FD_CLR and FD_ISSET.
(gdb_wait_for_event) [!HAVE_POLL]: Copy fd_set sets directly
instead of using memcpy and memset. Use FD_ISSET.
* config/i386/xm-go32.h (fd_mask): Remove typedef.
LINUX_SIGTRAMP_INSN1, LINUX_SIGTRAMP_OFFSET1,
LINUX_SIGTRAMP_INSN2, LINUX_SIGTRAMP_OFFSET2, linux_sigtramp_code,
LINUX_SIGTRAMP_LEN, i386_linux_sigtramp_start,
LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1,
linux_rt_sigtramp_code, LINUX_RT_SIGTRAMP_LEN,
i386_linux_rt_sigtramp_start, i386_linux_in_sigtramp,
i386_linux_sigcontext_addr, LINUX_SIGCONTEXT_PC_OFFSET,
i386_linux_sigtramp_saved_pc, LINUX_SIGCONTEXT_SP_OFFSET,
i386_linux_sigtramp_saved_sp): Deleted. These all implement
Linux-specific signal trampoline detection, and should be moved to...
* i386-linux-nat.c: ... here.
* config/i386/tm-linux.h (I386_LINUX_SIGTRAMP): No need to define
this any more, since we're not enabling OS-specific code in a
OS-independent file.
Allow GDB to run on Linux 2.0 again.
* config.in: Add HAVE_PTRACE_GETREGS.
* configure.in: Check if <sys/ptrace.h> defines PTRACE_GETREGS.
* configure: Regenerated.
* config/i386/nm-linux.h (CANNOT_FETCH_REGISTER,
CANNOT_STORE_REGISTER): New defines.
* i386-linux-nat.c (have_ptrace_getregs): New variable.
(PTRACE_XFER_TYPE, CANNOT_FETCH_REGISTER, fetch_register,
old_fetch_inferior_registers, CANNOT_STORE_REGISTER,
store_register, old_store_inferior_registers): Copied over from
`inptrace.c' as a temporary measure.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs):
Conditionalize on HAVE_PTRACE_GETREGS. Define stubs if
HAVE_PTRACE_GETREGS isn't defined.
(fetch_regs): Reset `have_ptrace_getregs' if ptrace call fails
with EIO.
(fetch_inferior_registers, store_inferior_registers): Fall back on
the method use in `infptrace.c' (by calling
old_fetch_inferior_registers and old_store_inferior_registers) if
`have_ptrace_getregs' isn't set.
Fix support for Linux/i386 signal trampolines. The old approach
didn't work for Linux 2.2 and beyond, and didn't work with recent
versions of the GNU C library.
* i386-tdep.c (LINUX_RT_SIGTRAMP_INSN0, LINUX_RT_SIGTRAMP_OFFSET0,
LINUX_RT_SIGTRAMP_INSN1, LINUX_RT_SIGTRAMP_OFFSET1): New defines.
(linux_rt_sigtramp_code): New variable.
(LINUX_RT_SIGTRAMP_LEN): New define.
(i386_linux_rt_sigtramp_start): New function. Detect start of
signal trampolines for RT signals.
(i386_linux_sigtramp): Removed.
(i386_linux_in_sigtramp): New function.
(i386_linux_sigcontext_addr): New function. Recognize the names
of the signal tranmpolines used by recent versions of the GNU C
library, and add support for RT signals.
(LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET): New
defines. Moved here from config/i386/tm-linux.h.
(i386_linux_sigtramp_saved_pc, i386_linux_sigtramp_saved_sp):
Reimplement in terms of i386_linux_sigcontext_addr.
* config/i386/tm-linux.h (LINUX_SIGCONTEXT_SIZE): Removed.
(LINUX_SIGCONTEXT_PC_OFFSET, LINUX_SIGCONTEXT_SP_OFFSET):
Moved to i386-tdep.c.
(IN_SIGTRAMP): Redefine to call i386_linux_in_sigtramp.
Make cross-compilation for the Hurd more friendly.
From Jeff Bailey <jbailey@gnu.org>:
* configure.in: Use AC_CHECK_TOOL to find MiG.
* Makefile.in (MIG): New variable.
* config/i386/i386gnu.mh (MIG): Remove.
* configure: Regenerated.
* gdb/config/i386/windows.mh,
gdb/doc/GDBvn.texi, gdb/doc/remote.texi,
gdb/testsuite/gdb.base/README, gdb/testsuite/gdb.base/crossload.exp,
gdb/testsuite/gdb.base/i486-elf.u, gdb/testsuite/gdb.base/i860-elf.u,
gdb/testsuite/gdb.base/m68k-aout.u,
gdb/testsuite/gdb.base/m68k-aout2.u,
gdb/testsuite/gdb.base/m68k-elf.u, gdb/testsuite/gdb.base/mips-ecoff.u,
gdb/testsuite/gdb.base/sparc-aout.u,
gdb/testsuite/gdb.base/sparc-elf.u,
gdb/tui/Makefile,
readline/ChangeLog: These files have been removed over the course
of the last year, but weren't cvs removed from the old GDB repository
on sourceware.
* utils.c: <readline/readline.h> instead of "readline/readline.h".
* configure.in (TERM_LIB): Search for the appropriate term library
on the host system.
* configure: Regenerated.
* Makefile.in (TERMCAP): Set based on autoconf check.
* config/*/*.mh: Don't override TERMCAP setting.
* config/i386/xm-cygwin.h: Remove REQUEST_QUIT definition.
* config/powerpc/xm-cygwin.h: Ditto.
PR 17664.
With this define in place, you can't type "q" to get out of GDB's pager
under Cygwin.
Changes to account for name change from cygwin32 to cygwin and
clean up Win32-related ifdefs.
* configure.tgt: check for cygwin* instead of cygwin32.
New cygwin gdb_target variable loses the "32".
* configure.host: check for cygwin* instead of cygwin32.
New cygwin gdb_host variable loses the "32".
* configure.in: test __CYGWIN__ instead of __CYGWIN32__,
rename gdb_cv_os_cygwin32 variable to drop the "32". Call
AM_EXEEXT instead of AC_EXEEXT since that isn't in a released
autoconf yet.
* configure: regenerate.
* main.c: drop "32" from cygwin_ funcs, include sys/cygwin.h
where
cygwin path conv protos live, instead of adding a proto here
for
them here.
* {main.c, ser-tcp.c, ser-unix.c, top.c}: check __CYGWIN__
instead of __CYGWIN32__.
* source.c: thoughout, check _WIN32 instead of WIN32.
* config/i386/cygwin32.mh: delete.
* config/i386/cygwin.mh: new file, was cygwin32.mh.
* config/i386/cygwin32.mt: delete.
* config/i386/cygwin.mt: new file, was cygwin32.mt.
* config/i386/tm-cygwin32.h: delete.
* config/i386/tm-cygwin.h: new file, was tm-cygwin32.h.
* config/i386/xm-cygwin32.h: delete.
* config/i386/xm-cygwin.h: new file, was xm-cygwin32.h.
* config/i386/xm-windows.h: #include xm-cygwin.h now.
* config/powerpc/cygwin32.mh: delete.
* config/powerpc/cygwin.mh: new file, was cygwin32.mh.
* config/powerpc/cygwin32.mt: delete.
* config/powerpc/cygwin.mt: new file, was cygwin32.mt.
* config/powerpc/tm-cygwin32.h: delete.
* config/powerpc/tm-cygwin.h: new file, was tm-cygwin32.h.
* config/powerpc/xm-cygwin32.h: delete.
* config/powerpc/xm-cygwin.h: new file, was xm-cygwin32.h.
* rdi-share/aclocal.m4: regenerate with aclocal.
* rdi-share/configure: regenerate with autoconf.
* rdi-share/{host.h, hostchan.c, hostchan.h, serdrv.c,
* serpardr.c,
unixcomm.c}: check __CYGWIN__ instead of __CYGWIN32__.
which define CRLF_SOURCE_FILES.
* win32-nat.c: 1) Add thread support, 2) fix ability to attach to
a running process, and 3) implement limited support for cygwin
signals.
(thread_rec): New function.
(child_add_thread): Ditto.
(child_init_thread_list): Ditto.
(child_delete_thread): Ditto.
(do_child_fetch_inferior_registers): Ditto.
(do_child_store_inferior_registers): Ditto.
(handle_output_debug_string): Ditto.
(child_fetch_inferior_registers): Use do_* function to perform
operation.
(child_store_inferior_registers): Ditto.
(child_continue): Ditto.
(child_thread_alive): Ditto.
(cygwin_pid_to_str): Ditto.
(handle_load_dll): Reorganize, add first attempt at reading
dll names from attached processes. Change info messages to provide
more information when dll is already loaded.
(handle_exception): Changes mandated by new thread-aware structures.
(child_wait): Track thread creation/destruction. Handle cygwin
signals.
(child_create_inferior): Ditto.
(child_resume): Ditto.
(child_kill_inferior): Ditto. Close child process handle to avoid a
handle leak.
(child_ops): Fill out child_ops fields that deal with threads.
* config/i386/tm-cygwin32.h: Declare function and macro needed
for converting a cygwin "pid" to a string.
* config/i386/xm-cygwin32.h: define HAVE_SIGSETMASK as 0 since
sigsetmask is not defined in cygwin.
* configure.in: Add more header files to AC_CHECK_HEADERS.
* configure: Regenerated.
* command.c: Include wait.h or sys/wait.h if present.
* inftarg.c: Ditto.
* core-aout.c: Include ptrace.h or sys/ptrace.h if present, based
on autoconf test.
* infptrace.c: Ditto.
* expprint.c: Include ctype.h for isprint prototype.
* i386aix-nat.c: Include sys/reg.h if autoconf says it is present.
* i386v-nat.c: Include ptrace.h, sys/ptrace.h, and sys/reg.h if
present, based on autoconf test.
* utils.c: Include curses.h and term.h if present.
(puts_debug): Change 'carriage_return' local variable to return_p
to avoid name clash.
* config/m68k/nm-apollo68b.h: Don't define PTRACE_IN_WRONG_PLACE,
determine it with autoconf.
* config/i386/nm-linux.h: Don't define NO_SYS_REG_H, determine it
with autoconf.
* config/i386/nm-i386sco.h: Don't define NO_PTRACE_H, determine it
with autoconf.
* config/i386/nm-i386v.h: Ditto.
* config/i386/nm-symmetry.h: Ditto.
* config/m88k/xm-cxux.h: Ditto.
* config/m88k/xm-dgux.h: Ditto.
* config/m68k/delta68.mh (NAT_FILE): nm-delta68.h no longer necessary.
* config/m68k/nm-delta68.h: Removed.
* procfs.c: Added replacement macros for LWP stuff. Fixed support
for UnixWare / SVR4.2MP targets and any targets which use
multi-file /proc entries. Fixed support for hardware watchpoints.
* solib.c: SCO needs some of the same code as SunOS. Change
preprocessor conditionals.
* config/i386/i386sco5.mt: New file.
* config/i386/tm-i386sco5.h: New file.
* config/i386/i386sco5.mh (NATDEPFILES): add i386v-nat.o.
* config/i386/nm-i386v42mp.h
(TARGET_HAS_HARDWARE_WATCHPOINTS): define.
Add other macros for hardware assisted watchpoints.
* config/i386/nm-i386sco5.h: Correct attributions.
(TARGET_HAS_HARDWARE_WATCHPOINTS): define.
* config/i386/nm-linux.h (target_remote_watchpoint): Pass
'type' through to i386_insert_watchpoint.
Mon Apr 20 14:12:30 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* infrun.c (wait_for_inferior): Don't add signalled processes
as new threads.
* procfs.c (wait_fd): Note if LWP has exited.
(procfs_wait): use GETPID to get process ID.
NOTE: I didn't commit Kean's changes to configure.host/configure.tgt
yet because they are kind of bogus and I'm punting back to him to let
him figure out what he's trying to do. So configuring for UnixWare
may not work just yet.
To configure.in: make PRINTF_HAS_LONG_LONG check more pedantic; check
that SCANF_HAS_LONG_DOUBLE instead of assuming PRINTF_HAS_LONG_DOUBLE
implies it; document.
* config/i386/cygwin32.mh: because cygwin.dll calls malloc/realloc
to allocate memory for environ space, gdb cannot use memory
checks -- set -DNO_MMCHECK
* ocd.c (ocd_insert_breakpoint, ocd_remove_breakpoint): macro
BDM_BREAKPOINT already has braces around it, remove erroneous ones.
* ser-ocd.c (ocd_write): conditionalize on _WIN32 instead of
__CYGWIN32__
* config/powerpc/tm-ppc-eabi.h: remove BDM_NUM_REGS, BDM_REGMAP
* ppc-bdm.c: move BDM_NUM_REGS, BDM_REGMAP here from tm.h file,
fill in doc fields of bdm_ppc_ops.
(bdm_ppc_fetch_registers): don't ask for invalid registers such
as the MQ or floating point regs not present on ppc 8xx boards
(bdm_ppc_store_registers): don't write those same invalid registers
* config/i386/cygwin32.mh: stop including ocd.o ser-ocd.o
* config/powerpc/ppc-eabi.mt:
* config/powerpc/ppcle-eabi.mt:
* config/powerpc/ppc-sim.mt:
* config/powerpc/ppcle-sim.mt: include ser-ocd.o
(dll_do_command): New static variable if _WIN32.
(ocd_open): Set dll_do_command if _WIN32.
(ocd_write): Use dll_do_command rather than do_command.
* config/i386/cygwin32.mh (XDEPFILES): Remove libwigglers.a.
(BDM_DLLNAME, BDM_LIBNAME, BDM_DEFFILE): Don't define.
($(BDM_LIBNAME)): Remove target.
* wigglers.def: Remove.
* Makefile.in: add DLLTOOL = @DLLTOOL@, pass on DLLTOOL to
sub makes, change clean rule to also remove *.a to remove
libwigglers.a, in dependencies: add ppc-bdm.o ocd.o ser-ocd.o and
remove remote-wiggler.o
* configure.in: add DLLTOOL support
* configure: regenerate
* wigglers.def: new file for imports for wigglers.dll
* ser-ocd.c: new file which is layer between ocd.c and either the
wigglers.dll or the target box, only stub so far
* config/powerpc/ppc-eabi.mt: add ppc-bdm.o to TDEPFILES
* config/powerpc/ppc-sim.mt: add ppc-bdm.o to TDEPFILES
* config/i386/cygwin32.mh: add ocd.o ser-ocd.o libwigglers.a
to XDEPFILES, add rules to build libwigglers.a
checking in changes of Stu Grossman <grossman@cygnus.com>:
* remote-wiggler.c: delete
* ocd.c: new, was remote-wiggler.c
always include sys/types.h, include ocd.h, move WIGGLER
commands and many wiggler prototypes to ocd.h, make wiggler_desc
static, stop making local wiggler functions static,
define write_mem_command for wiggler_write_bytes
(wiggler_start_remote): stop hardcoding the target type,
instead set and use a target_type variable.
(wiggler_open): add new target_type and ops args
(wiggler_wait): now no longer takes pid and target_status as args,
stop trying to set target_status struct, remove BGND insn
checks
(read_bdm_registers): renamed to wiggler_read_bdm_registers
(wiggler_read_bdm_registers): numregs arg changed to reglen arg,
remove pktlen check, set reglen instead of numregs
(dump_all_bdm_regs): delete
(wiggler_fetch_registers): delete
(wiggler_prepare_to_store): now just an empty function
(wiggler_store_registers): delete
(wiggler_read_bdm_register): new
(wiggler_write_bdm_registers): new
(wiggler_write_bdm_register): new
(wiggler_write_bytes): use write_mem_command variable instead of
WIGGLER_WRITE_MEM
(get_packet): renamed to wiggler_get_packet, change refs throughout
(put_packet): renamed to wiggler_put_packet, change refs throughout
(wiggler_get_packet): add break to default case of switch,
change length of WIGGLER_GET_VERSION len to 10 from 4 to match
specs
(wiggler_mourn): unpush_target with current_ops, not &wiggler_ops
(flash_xfer_memory): delete
(noop_store_registers): new placeholder replacement for
target_store_registers() which prevents generic_load from trying to
set up the PC.
(bdm_update_flash_command): add store_registers_tmp variable,
make handling of wiggler_ops more generic -- define wiggler_ops
in a target-specific file instead (such as ppc-bdm.c in the case
of the ppc), use current_target to deal with registers again
making this file less target-specific.
(bdm_read_register_command): new
(_initialize_remote_wiggler): stop doing add_target (&wiggler_ops),
comment out add_cmd ("read-register", ...)
* ocd.h: new, contains common wiggler prototypes, command definitions
* ppc-bdm.c: file for ppc-specific OCD code, including target_ops
structure for ppc bdm
(bdm_ppc_open): new
(bdm_ppc_wait): new
(bdm_ppc_fetch_registers): new
(bdm_ppc_store_registers_: new
(_initialize_bdm_ppc): new
* config/powerpc/tm-ppc-eabi.h: add necessary CPU32 BDM defines
whether CRLF_SOURCE_FILES is defined.
(open_source_file): Use OPEN_MODE with open and openp.
(print_source_lines): Use FDOPEN_MODE with fdopen. If
CRLF_SOURCE_FILES is defined, ignore \r characters.
(forward_search_command): Use FDOPEN_MODE with fdopen.
(reverse_search_command): Likewise.
* config/i386/xm-cygwin32.h (CRLF_SOURCE_FILES): Define.
(LSEEK_NOT_LINEAR): Don't define.
* procfs.c: Substantial (but incomplete) changes to support
sysv4.2mp procfs as implemented in UnixWare 2.1. The procinfo
struct now has substructs like struct flt_ctl instead of
just a fltset_t and has a ctl_fd, status_fd, as_fd, and
map_fd instead of a single fd. Non-sysv4.2mp procfs models
still have the structs and multiple fds, but don't use the
entire struct and the four fds all point to the same thing.
We use PROCFS_USE_READ_WRITE to decide whether to talk to
procfs with reads/writes or use ioctl instead. We use
HAVE_MULTIPLE_PROC_FDS to determine whether procfs really has
multiple fds or not. PROC_NAME_FMT is split out into
CTL_PROC_NAME_FMT, AS_PROC_NAME_FMT, MAP_PROC_NAME_FMT,
STATUS_PROC_NAME_FMT.
(procfs_notice_signals): now a necessary wrapper around
(notice_signals): which are the new guts for noticing signals
(open_proc_file): gets a new flag arg used in sysv4.2mp to
determine whether or not to attempt to open the ctl_fd.
(procfs_read_status): new local function, reads procfs status
(procfs_write_pcwstop): new local function, writes a PCWSTOP
(procfs_write_pckill): new local function, writes a PCKILL
(unconditionally_kill_inferior): remove signo since we now
just call procfs_write_pckill().
(procfs_xfer_memory): call lseek with SEEK_SET rather than 0
(proc_iterate_over_mappings): the whole function is ifdefed
on UNIXWARE to keep things readable.
Expanded the syscall_table to include new potential sysv4.2mp
members. Note that all ifdefs of UNIXWARE should be eliminated
if possible or renamed to describe what's being selected for a
bit better. Sysv4.2mp and IRIX both have SYS_sproc so the
IRIX specific code now also checks it's not UNIXWARE.
* config/i386/tm-i386v42mp.h: also define HAVE_PSTATUS_T,
HAVE_NO_PRRUN_T, PROCFS_USE_READ_WRITE, and UNIXWARE
* config/mips/nm-irix4.h: set CTL_PROC_NAME_FMT et al to
"/debug/%d" as PROC_NAME_FMT used to be
New UnixWare 2.1 configuration
* config/i386/i386v42mp.mt: new
* config/i386/i386v42mp.mh: new
* config/i386/tm-i386v42mp.h: new
* config/i386/nm-i386v42mp.h: new
* configure.tgt: added new entries
* configure.host: added new entries
of 64-bit values on Windows.
* config/i386/xm-windows.h: Leave CC_HAS_LONG_LONG defined,
undefine PRINTF_HAS_LONG_LONG, so that 64-bit values will
be printed without loss of upper bits.
external forms may have different sizes. Don't assume that an
internal_nlist has the same layout as an external_nlist. Create
symbol for n_strx element so to hide specifics of nlist from
partial-stab.h.
* partial-stab.h: Don't reference dbxread symbols directly. Use
CUR_SYMBOL_STRX instead.
* config/i386/xm-windows.h: Define SIGQUIT and SIGTRAP.
* config/v850/tm-v850.h: Define PS_REGNUM and TARGET_V850 for
MSVC builds.
* mswin/gdbwin.c (reg_order): Define register order for V850.
* mswin/gui.cpp (CGuiApp::InitInstance): Define target name for
V850.
* mswin/regdoc.h: Define MAXREGS for V850.
SIGTRAMP_END.
* config/i386/tm-i386os9k.h (SIGTRAMP_START, SIGTRAMP_END):
Define with dummy pc arg.
* config/m68k/tm-nbsd.h: Ditto.
* doc/gdbint.texinfo: Document that SIGTRAMP_START and
SIGTRAMP_END are macros that take an single argument.
Thu Jul 25 19:41:31 1996 Fred Fish <fnf@cygnus.com>
for details about these changes. I was going to include the complete
entry in the checkin message but it was apparently so large it caused
cvs to dump core.
and MMALLOC_CHECK macros, and add comment indicating how host dependent
makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or
to use it but to not do heap corruption checking.
* gdbserver/Makefile.in: Ditto.
* utils.c (init_malloc): Replace warning() use with direct call of
fprintf_unfiltered, since current_target has not yet been set and thus
we cannot use warning(). If we try to use mmcheck and it fails,
suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE
defined. Other small mmalloc related cleanups.
* config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
* config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK.
* config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT);
* config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
* config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
Remove obsolete defines.
* config/alpha/alpha-linux.mh (MMALLOC_DISABLE):
* config/alpha/alpha-osf1.mh (MMALLOC_DISABLE):
* config/rs6000/rs6000.mh (MMALLOC_DISABLE):
* config/rs6000/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix4.mh (MMALLOC_DISABLE):
* config/powerpc/aix.mh (MMALLOC_DISABLE):
* config/ns32k/ns32km3.mh (MMALLOC_DISABLE):
* config/mips/mipsm3.mh (MMALLOC_DISABLE):
* config/mips/decstation.mh (MMALLOC_DISABLE):
* config/m88k/cxux.mh (MMALLOC_DISABLE):
* config/i386/i386mk.mh (MMALLOC_DISABLE):
* config/i386/i386m3.mh (MMALLOC_DISABLE):
* config/i386/i386gnu.mh (MMALLOC_DISABLE):
Use MMALLOC_CFLAGS instead.
* NEWS: Add Alpha Linux as a new native configuration.
* mdebugread.c (parse_symbol): When we find a malloc() symbol with
return type VOID, assume no debugging info is available for that
object file and patch the return value into VOID *. Otherwise,
operations requiring an implicit call to malloc() will fail.
* infrun.c (wait_for_inferior): The criterion to detect entering a
sigtramp handler is now: (a) the current pc is inside a sigtramp
handler, (b) the previous pc is not in a sigtramp handler, and (c)
the current stack pointer is "inner" than the old one. Condition
(c) is new to avoid mistaking a return from a signal handler into
sigtramp as a new sigtramp invocation.
* dcache.c (struct dcache_block): Declare addr as CORE_ADDR. An
int may not be big enough to hold an address.
(dcache_hit): Ditto.
(dcache_peek_byte): Fix indentation.
* configure.in (alpha-*-linux*): Add target.
* configure: Rebuild
* config/alpha/tm-alpha.h (PROC_DESC_IS_DYN_SIGTRAMP): New macro.
(SET_PROC_DESC_IS_DYN_SIGTRAMP): Ditto.
(DYNAMIC_SIGTRAMP_OFFSET): Ditto.
(SIGCONTEXT_ADDR): Ditto.
(FRAME_PAST_SIGTRAMP_FRAME): Ditto.
* config/alpha/alpha-linux.mh: New file.
* config/alpha/alpha-linux.mt: Ditto.
* config/alpha/nm-linux.h: Ditto.
* config/alpha/tm-alphalinux.h: Ditto.
* config/alpha/xm-alphalinux.h: Ditto.
* config/alpha/xm-alphaosf.h: Renamed from xm-alpha.h.
* config/alpha/alpha-osf1.mh (XM_FILE): Change from xm-alpha.h to
xm-alphaosf.h.
* config/alpha/alpha-osf2.mh: Ditto.
* blockframe.c (find_pc_partial_function): Pass PC to
SIGTRAMP_START and SIGTRAMP_END macros for the benefit of systems
that detect sigtramp code via designated code sequences (as is the
case for Linux/Alpha, for example).
* config/i386/tm-i386bsd.h: Change SIGTRAMP_START and SIGTRAMP_END
to ignore new PC argument.
* config/m68k/tm-hp300bsd.h: Ditto.
* config/vax/tm-vax.h: Ditto.
* alpha-tdep.c (alpha_linux_sigtramp_offset): New function.
(alpha_osf_skip_sigtramp_frame): Ditto.
(push_sigtramp_desc): Ditto.
(alpha_find_saved_regs): Use SIGCONTEXT_ADDR macro to extract
sigcontext address from frame.
(alpha_saved_pc_after_call): When in sigtramp, use
alpha_frame_saved_pc() instead of read-register().
(after_prologue): When inside a dynamically generated sigtramp
function, there is no prologue, so return address of first
instruction.
(alpha_in_prologue): Fix typo in comment.
(find_proc_desc): Use macro DYNAMIC_SIGTRAMP_OFFSET to determine
whether we're inside a dynamicaly generated sigtramp function. If
so, create and push and appropriate procedure descriptor.
(alpha_frame_chain): Use macro FRAME_PAST_SIGTRAMP_FRAME to obtain
the frame past a sigtramp frame (if the current frame is indeed a
sigtramp function).
(init_extra_frame_info): Don't read next frame register off of
stack-pointer when inside a dynamiccaly generated sigtramp.
(alpha_pop_frame): Also unlink and destroy procedure descriptors
created for dynamically generated sigtramp functions.
* alpha-nat.c: When compiling under Linux, include <asm/reg.h> and
<alpha/ptrace.h> instead of <machine/reg.h>
* configure: Regenerate.
From: Robert Lipe <robertl@dgii.com>
Add support for SCO OpenServer 5 (a.k.a. 3.2v5*) This
target is an SVR3.2 with COFF, ELF, and shared libes, but
no /proc.
* config/i386/i386sco5.mh: New file.
* config/i386/nm-i386sco5.h: New file.
here from config/i386/xm-i386mach.h, fix name.
* config/i386/nm-sun386.h: Ditto, from config/i386/xm-sun386.h.
* config/i386/nm-ptx4.h (CHILD_PREPARE_TO_STORE): Move to
here from config/i386/xm-ptx4.h.
* config/i386/nm-ptx4.h: Ditto, from config/i386/xm-ptx.h.
* config/i386/nm-symmetry.h: Ditto, from config/i386/xm-symmetry.h.
* config/m68k/nm-sun3.h: Ditto, from config/m68k/xm-sun3.h.
more housekeeping
Also check for gregset_t and fpregset_t types.
* configure: Regenerate.
* core-regset.c (sys/procfs.h): Only include if HAVE_SYS_PROCFS_H
is defined.
(fetch_core_registers): Turn into stub unless both HAVE_GREGSET_T
and HAVE_FPREGSET_T are defined. These changes allow systems
like linux that are migrating to /proc support to use a single
configuration for both new and old versions.
* config/i386/linux.mt: Note that this is now for both a.out and
ELF systems.
* config/i386/linux.mh (NATDEPFILES): Add solib.o, core-regset.o,
i386v4-nat.o
* config/i386/tm-linux.h (tm-sysv4.h): Include.
* config/i386/xm-linux.h (solib.h): Include
(SVR4_SHARED_LIBS): Define.
* i386v4-nat.c: Only compile if HAVE_SYS_PROCFS_H is defined.
(supply_gregset, fill_gregset): Compile if HAVE_GREGSET_T defined.
(supply_fpregset, fill_fpregset): Compile if HAVE_FPREGSET_T defined.
* gdbserver/low-linux.c: New file.
* remote.c (remote_read_bytes): Fix aborts on larger packets.
* config/i386/linux.mh (GDBSERVER_DEPFILES, GDBSERVER_LIBS):
Define.
* stabsread.c (define_symbol): If register value is too large,
tell what it is and what max is.
from NUM_REGS to get number of general registers that we care about.
Update copyright to 1996.
* config/i386/tm-i386.h (REGISTER_BYTES): Define in terms
of number of general regs and number of floating point regs.
Update copyright to 1996.
definitions.
(TARGET_BYTE_ORDER): Moved here from tm-i386v.h.
(IEEE_FLOAT): Moved here from tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Define default as 2.
(FUNCTION_START_OFFSET): Moved here from tm-i386v.h.
(SKIP_PROLOGUE): Moved here from tm-i386v.h.
(SAVED_PC_AFTER_CALL): Moved here from tm-i386v.h.
(INNER_THAN): Moved here from tm-i386v.h.
(BREAKPOINT): Moved here from tm-i386v.h.
(DECR_PC_AFTER_BREAK): Moved here from tm-i386v.h.
(ABOUT_TO_RETURN): Moved here from tm-i386v.h.
(REGISTER_SIZE): Moved here from tm-i386v.h.
(NUM_REGS): Moved here from tm-i386v.h.
(REGISTER_NAMES): Moved here from tm-i386v.h.
(EXTRACT_STRUCT_VALUE_ADDRESS): Moved here from tm-i386v.h.
(FP_REGNUM): Moved here from tm-i386v.h.
(SP_REGNUM): Moved here from tm-i386v.h.
(PC_REGNUM): Moved here from tm-i386v.h.
(PS_REGNUM): Moved here from tm-i386v.h.
(FP0_REGNUM): Moved here from tm-i386aix.h.
(FPC_REGNUM): Moved here from tm-sun386.h.
(REGISTER_BYTES): Moved here from tm-i386aix.h.
(REGISTER_BYTE): Moved here from tm-i386aix.h.
(REGISTER_RAW_SIZE): Moved here from tm-i386aix.h.
(MAX_REGISTER_RAW_SIZE): Moved here from tm-i386aix.h.
(REGISTER_VIRTUAL_SIZE): Moved here from tm-i386aix.h.
(MAX_REGISTER_VIRTUAL_SIZE): Moved here from tm-i386aix.h.
(EXTRACT_RETURN_VALUE): Moved here from tm-i386aix.h.
(STORE_RETURN_VALUE): Moved here from tm-i386aix.h.
(REGISTER_VIRTUAL_TYPE): Moved here from tm-i386v.h.
(STORE_STRUCT_RETURN): Moved here from tm-i386v.h.
(FRAME_CHAIN): Moved here from tm-i386v4.h.
(FRAMELESS_FUNCTION_INVOCATION): Moved here from tm-i386v4.h.
(FRAME_SAVED_PC): Moved here from tm-i386os9k.h
(FRAME_ARGS_ADDRESS): Moved here from tm-i386v.h.
(FRAME_LOCALS_ADDRESS): Moved here from tm-i386v.h.
(FRAME_NUM_ARGS): Moved here from tm-i386sun.h.
(FRAME_ARGS_SKIP): Moved here from tm-i386v.h.
(FRAME_FIND_SAVED_REGS): Moved here from tm-i386v.h.
(PUSH_DUMMY_FRAME): Moved here from tm-i386v.h.
(POP_FRAME): Moved here from tm-i386v.h.
(CALL_DUMMY, CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET,
CALL_DUMMY_BREAKPOINT_OFFSET, FIX_CALL_DUMMY): Moved here from
tm-i386v.h
(print_387_control_word, print_387_status_word): Declare prototypes.
(struct frame_info, struct frame_saved_regs): Forward decls for
prototypes.
(SP_ARG0): Moved here from tm-i386v.h.
* config/i386/tm-i386v.h:
(i386/tm-i386.h): Include.
(TARGET_BYTE_ORDER): Remove.
(IEEE_FLOAT): Remove.
(START_INFERIOR_TRAPS_EXPECTED): Undef before redefine to 4.
(FUNCTION_START_OFFSET): Remove.
(SKIP_PROLOGUE): Remove.
(i386_skip_prologue): Remove prototype.
(SAVED_PC_AFTER_CALL): Remove.
(INNER_THAN): Remove.
(BREAKPOINT): Remove.
(DECR_PC_AFTER_BREAK): Remove.
(ABOUT_TO_RETURN): Remove.
(REGISTER_SIZE): Remove.
(NUM_REGS): Undef before redefine to 16 (no FP support).
(REGISTER_NAMES): Undef before redefine.
(FP_REGNUM, SP_REGNUM, PC_REGNUM, PS_REGNUM): Remove.
(REGISTER_BYTES): Undef before redefine.
(REGISTER_BYTE): Undef before redefine.
(REGISTER_RAW_SIZE): Undef before redefine.
(REGISTER_VIRTUAL_SIZE): Undef before redefine.
(MAX_REGISTER_RAW_SIZE): Undef before redefine.
(MAX_REGISTER_VIRTUAL_SIZE): Undef before redefine.
(REGISTER_VIRTUAL_TYPE): Undef before redefine.
(STORE_STRUCT_RETURN): Undef before redefine.
(EXTRACT_RETURN_VALUE): Undef before redefine.
(STORE_RETURN_VALUE): Undef before redefine.
(EXTRACT_STRUCT_VALUE_ADDRESS): Remove.
(FRAME_CHAIN): Undef before redefine.
(FRAMELESS_FUNCTION_INVOCATION): Undef before redefine.
(FRAME_SAVED_PC): Undef before redefine.
(FRAME_ARGS_ADDRESS): Remove.
(FRAME_LOCALS_ADDRESS): Remove.
(FRAME_NUM_ARGS): Undef before redefine.
(FRAME_ARGS_SKIP): Remove.
(FRAME_FIND_SAVED_REGS): Remove.
(PUSH_DUMMY_FRAME): Remove.
(POP_FRAME): Remove.
(CALL_DUMMY): Remove.
(CALL_DUMMY_LENGTH): Remove.
(CALL_DUMMY_START_OFFSET): Remove.
(CALL_DUMMY_BREAKPOINT_OFFSET): Remove
(FIX_CALL_DUMMY): Remove.
(print_387_control_word): Remove.
(print_387_status_word): Remove.
(SP_ARG0): Remove.
* config/i386/tm-symmetry.h:
(TM_SYMMETRY_H): Enclose file in test for define & define if needed.
(START_INFERIOR_TRAPS_EXPECTED): Move to after inclusion of
tm-i386v4.h or tm-i386v.h, #undef, and #define back to 2.
(DECR_PC_AFTER_BREAK): Move to after inclusion of tm-i386v4.h
or tm-i386v.h, #undef, and #define to 0.
(MAX_REGISTER_RAW_SIZE): Remove.
(FRAME_CHAIN): Remove.
(FRAMELESS_FUNCTION_INVOCATION): Remove.
(FRAME_SAVED_PC): Remove.
(print_387_control_word, print_387_status_word): Remove prototypes.
* config/i386/tm-ptx.h:
(TM_PTX_H): Enclose file in test for define & define if needed.
(START_INFERIOR_TRAPS_EXPECTED): Move to after inclusion of
tm-i386v4.h or tm-i386v.h, #undef, and #define back to 2.
(DECR_PC_AFTER_BREAK): Move to after inclusion of tm-i386v4.h
or tm-i386v.h, #undef, and #define to 0.
(SDB_REG_TO_REGNUM): Remove obsolete commented out define.
(print_387_control_word, print_387_status_word): Remove prototypes.
* config/i386/tm-linux.h:
(TM_LINUX_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
* config/i386/tm-i386v4.h:
(TM_I386V4_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
(FRAME_CHAIN): Moved to tm-i386.h.
(FRAMELESS_FUNCTION_INVOCATION): Moved to tm-i386.h.
(FRAME_SAVED_PC): Remove.
(sigtramp_saved_pc): Define as i386v4_sigtramp_saved_pc.
(FRAME_NUM_ARGS): Remove.
* config/i386/tm-i386os9k.h:
(TM_I386OS9K_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
(NUM_REGS): Undefine before redefining.
(FRAME_CHAIN): Remove.
(FRAMELESS_FUNCTION_INVOCATION): Remove.
(FRAME_SAVED_PC): Move to tm-i386.h.
* config/i386/tm-i386nw.h:
(TM_I386NW_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
* config/i386/tm-i386bsd.h:
(TM_I386BSD_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
(FRAMELESS_FUNCTION_INVOCATION): Remove.
(FRAME_SAVED_PC): Remove.
* config/i386/tm-i386aix.h:
(i386/tm-i386.h): Include instead of tm-i386v.h.
(START_INFERIOR_TRAPS_EXPECTED): Remove.
(FP_REGNUM): Remove.
(SP_REGNUM): Remove.
(PC_REGNUM): Remove.
(PS_REGNUM): Remove.
(FP0_REGNUM): Moved to tm-i386.h.
(NUM_REGS): Remove.
(REGISTER_NAMES): Remove.
(REGISTER_BYTES): Moved to tm-i386.h.
(REGISTER_BYTE): Moved to tm-i386.h.
(REGISTER_RAW_SIZE): Moved to tm-i386.h.
(MAX_REGISTER_RAW_SIZE): Moved to tm-i386.h.
(REGISTER_VIRTUAL_SIZE): Moved to tm-i386.h.
(REGISTER_VIRTUAL_TYPE): Removed.
(EXTRACT_RETURN_VALUE): Moved to tm-i386.h.
(STORE_RETURN_VALUE): Moved to tm-i386.h.
* config/i386/tm-sun386.h:
(TM_SUN386_H): Enclose file in test for define & define if needed.
(i386/tm-i386.h): Include.
(TARGET_BYTE_ORDER): Remove.
(FUNCTION_START_OFFSET): Remove.
(SKIP_PROLOGUE): Remove.
(SAVED_PC_AFTER_CALL): Remove.
(INNER_THAN): Remove.
(BREAKPOINT): Remove.
(DECR_PC_AFTER_BREAK): Remove.
(ABOUT_TO_RETURN): Remove.
(REGISTER_SIZE): Remove.
(NUM_REGS): Undefine before defining.
(REGISTER_NAMES): Undefine before redefining.
(REGISTER_BYTES): Undefine before redefining.
(REGISTER_BYTE): Undefine before defining.
(FP_REGNUM): Undefine before defining.
(PC_REGNUM): Undefine before defining.
(FPC_REGNUM): Undefine before defining.
(REGISTER_RAW_SIZE): Undefine before defining.
(FRAME_CHAIN): Undefine before defining.
(FRAMELESS_FUNCTION_INVOCATION): Undefine before defining.
(FRAME_SAVED_PC): Undefine before defining.
(FRAME_NUM_ARGS): Moved to tm-i386.h.
(MAX_REGISTER_RAW_SIZE): Remove.
(MAX_REGISTER_VIRTUAL_SIZE): Remove.
(STORE_STRUCT_RETURN): Remove.
(EXTRACT_STRUCT_VALUE_ADDRESS): Remove.
(FRAME_ARGS_ADDRESS): Remove.
(FRAME_LOCALS_ADDRESS): Remove.
(FRAME_NUM_ARGS): Undefine before defining.
(FRAME_ARGS_SKIP): Remove.
(FRAME_FIND_SAVED_REGS): Remove.
(PUSH_DUMMY_FRAME): Remove.
(POP_FRAME): Remove.
(CALL_DUMMY, CALL_DUMMY_LENGTH, CALL_DUMMY_START_OFFSET): Remove.
(struct frame_info, struct frame_saved_regs): Remove forward decls
for prototypes.
* config/i386/tm-i386lynx.h (i386/tm-i386.h): Include instead of
tm-i386v.h.
* config/i386/tm-i386m3.h (i386/tm-i386.h): Include instead of
tm-i386v.h.
* defs.h: Test on name __WIN32__ rather than WIN32.
* inflow.c (new_tty): Likewise
* terminal.h: Likewise.
* utils.c (initialize_utils): Likewise.
* win32-nat.c (child_create_inferiror): Print error code when failing.
* config/i386/win32.mh (XM_CLIBS): Need -lkernel32.
* callback.[ch]: New files.
* remote-rdp.c: Support for the ARM RDP monitor.
* Makefile: Update.
* arm-tdep.c (arm_othernames): New.
(_initialize_arm_tdep): install 'othernames' command.
(arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New.
* configure.in: Check for termios.h, termio.h and sgtty.h.
(i[345]86-*-win32*): New host.
* configure: Regenerated.
* inflow.c: Clean up inclusions.
* main.c (main): Check for WINGDB, not WIN32.
* printcmd.c (do_examine): Put QUIT test in loop.
* remote-hms.c (e7000_load): Delete.
(hms_ops): Point to generic_load instead.
* remote-hms.c (hms_ops): Point to generic_load.
* remote-sim.c (sim_callback_write_stdout): Becomes
gdbsim_write_stdout.
(gdbsim_load): Call generic_load.
* remote-utils.c (gr_load_image): Delete.
* ser-unix.c (terminal.h): Include instead of havig
own #if tree.
(hardwire_flush_input): Reset input buffer too.
* source.c (openp): If WIN32 then open file in binary mode.
* terminal.h: Configure IO mechanism using autoconf defines if available and
not overriden.
* utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check.
* config/arm/arm.mt (TDEPFILES): Add remote-rdp.o
* config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE.
(ADDR_BITS_REMOVE): New.
(ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New.
(INST_xx): New
(FRAME_FIND_SAVED_REGS): Pass the right argument.
(arm_get_next_pc): Declare.
* mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
error message to work with pre-ansi compilers.
(monitor_load_srec): reduced length of s-records from 128 to 32
bytes so download is more reliable with the rom68k monitor.
* rom68k-rom.c: Added trailing space to prompt string.
* config/i386/xm-i386sco.h (HAVE_STRSTR): Removed.
* config/i386/xm-go32.h, mswin/xm.h (SYS_SIGLIST_MISSING):
Removed.
* defs.h, config/{xm-lynx.h, xm-nbsd.h},
config/i386/{xm-i386bsd.h, xm-linux.h},
config/m68k/xm-hp300bsd.h, config/mips/xm-irix4.h,
config/ns32k/xm-ns32km3.h, doc/gdbint.texinfo
(PSIGNAL_IN_SIGNAL_H): Removed.
<link.h>.
* i386b-nat.c: Add i386_float_info(), etc.
* config/i386/nm-nbsd.h: #define FLOAT_INFO.
* config/nm-nbsd.h: New file, for generic NetBSD native support.
* config/i386/nm-nbsd.h: Use it.
* config/sparc/nm-nbsd.h: Use it.
* config/ns32k/nm-nbsd.h: Use it.
* configure.in (i386-*-netbsd): Use config/i386/nbsd.m[ht].
(ns32k-*-netbsd): Use config/ns32k/nbsd.m[ht].
* config/i386/{nbsd.mh,nbsd.mt,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
New files, support for NetBSD/i386.
* config/ns32k/{nbsd.mh,nbsd.mh,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
New files, support for NetBSD/ns32k.
of config/nm-trash.h.
* config/nm-trash.h: Remove.
* config/nm-empty.h: New file.
* config/i386/nm-m3.h: New file, includes config/nm-m3.h.
* config/mips/nm-m3.h: New file, includes config/nm-m3.h.
* config/m68k/nm-sysv4.h: New file, includes config/nm-sysv4.h.
* config/mips/nm-sysv4.h: New file, includes config/nm-sysv4.h.
* config/sparc/nm-sysv4.h: New file, includes config/nm-sysv4.h.
* Add rule for annotate.o to keep Sun make happy.
* configure.in: Add config for powerpc/Netware.
* partial-stab.h (near N_SO): Don't call START_PSYMTAB with null
filename. This speeds up handling of trailing N_SO stabs (they
mark the end of a .o file).
* target.c, target.h: Change the way pushing and popping of
targets work to support target overlays and inheritance.
* corelow.c, hppa-tdep.c, inflow.c, remote-nindy.c, utils.c:
Fixup references to current_target, due to previous changes.
* config/i386/tm-i386nw.h: Enable longjmp support. More work is
needed to get the address of longjmp out of the target.
* (nlm_symfile_read): Record bounds of main() so that backtrace
command will know where to stop.
* objfiles.c (objfile_relocate): Relocate entry point/func info
for backtrace as well.
* objfiles.h: Define values for invalid PCs for entry point info.
* symfile.c (init_entry_point_info): Initialize invalid values
with aforementioned macros.
* config/alpha/tm-alphanw.h: Turn on FRAME_CHAIN_VALID_ALTERNATE
to cause backtrace to stop when it gets back to main().
* config/i386/tm-i386nw.h: Ditto.
BROKEN_LARGE_ALLOCA. Do the cleanup before returning, rather than
leaving it on the chain. Reindent much of this function.
* config/sparc/{xm-sun4sol2.h,xm-sun4os4.h},
config/i386/{xm-sun386.h,xm-i386m3.h,xm-i386mach.h},
config/m68k/{sun3os4.h,xm-news.h,xm-hp300hpux.h},
config/ns32k/xm-ns32km3.h: Remove all references to
BROKEN_LARGE_ALLOCA; with the above change it is no longer needed.
* main.c, fork-child.c, many config files: Remove all
SET_STACK_LIMIT_HUGE code; with the above changes it should no
longer be needed.
* symtab.c (lookup_partial_symbol): Use if and abort, not assert.
This avoids __eprintf troubles.
* main.c (main): Surround in #ifndef MAIN_OVERRIDE. Move
initialization code which needs to be called even if we bypass the
command line stuff into gdb_init.
* utils.c (fputs_unfiltered): Surround in #ifndef
FPUTS_UNFILTERED_OVERRIDE.
* Makefile.in (libgdb.a): New target.
* utils.c: Rearrange I/O stuff a bit so that all output goes
through fputs_unfiltered. Use vasprintf; removes arbitrary limit
which made %s not work with arbitrarily large strings.
* printcmd.c (printf_command): Use printf_filtered, not
printf_unfiltered and printf, now that arbitrary limit is gone.
Remove all conditionals and definitions for ptx.
I386_REGNO_TO_SYMMETRY moved to here from symm-tdep.c.
Fix addresses of floating point registers in REGISTER_U_ADDR.
STORE_STRUCT_RETURN now handles cc and gcc conventions.
FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC,
IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET defined to make backtracing through
signal trampoline code work.
* config/i386/xm-symmetry.h: Clean up, it is now only used for Dynix.
Remove all conditionals and definitions for ptx.
Remove KDB definitions.
cp-valprint.c, eval.c, expprint.c, findvar.c, language.c,
objfiles.h, infcmd.c, printcmd.c, stack.c, typeprint.c,
valarith.c, valops.c, valprint.c, value.h, values.c: Replace
value with value_ptr. This is for the ptx compiler.
* objfiles.h, target.h: Don't declare a "sec_ptr" field using a
"sec_ptr" typedef.
* symm-nat.c: Add a bunch of stuff for symmetry's ptrace stuff.
#if 0 i386_float_info.
* symm-tdep.c (round): Remove. Also remove sgttyb.
* symm-tdep.c: Remove lots of stuff which duplicates stuff from
i386-tdep.c. Remove register_addr and ptx_coff_regno_to_gdb.
* i386-tdep.c (i386_frame_find_saved_regs): Put in
I386_REGNO_TO_SYMMETRY check in case it is needed for Dynix
someday.
* config/i386/nm-symmetry.h: Change KERNEL_U_ADDR. Move
stuff from PTRACE_READ_REGS, PTRACE_WRITE_REGS macros to
symm-nat.c. Define CHILD_WAIT and declare child_wait().
* config/i386/tm-symmetry.h: Remove call function stuff; stuff in
tm-i386v.h is apparently OK.
* config/i386/xm-symmetry.h [_SEQUENT_]: Define HAVE_TERMIOS not
HAVE_TERMIO. Define MEM_FNS_DECLARED, NEED_POSIX_SETPGID, and
USE_O_NOCTTY.
VARIABLES_INSIDE_BLOCK to OS9K_VARIABLES_INSIDE_BLOCK.
* symfile.c (symbol_file_command): Check for (CORE_ADDR)-1, not
(CORE_ADDR)0, from target_link, since that is what it uses.
Process name at end, not during parsing (like we did before Kung's
change), so that -readnow and -mapped can appear anywhere.
Make text_relocation a local variable.
* config/i386/i386os9k.mt: Fix comment.
* Makefile.in (ALLDEPFILES): Add remote-os9k.c.
* os9kread.c: Put "comments" after #endif inside /* */.
* stabsread.h: Add os9k_stabs variable.
* stabsread.c (start_stabs), os9kread.c (os9k_process_one_symbol):
Set it.
* stabsread.c (define_symbol): If os9k_stabs, put a 'V' symbol
descriptor in global_symbols not local_symbols.
(read_type): If os9k_stabs, accept 'c', 'i', and 'b' type
descriptors.
(read_type): If os9k_stabs, accept function parameters after 'f'
type descriptor.
(read_array_type): If os9k_stabs, don't expect index type and
expect lower and upper to be separated by ',' not ';'.
(read_enum_type): If os9k_stabs, read a number before the first
enumeration constant.
(os9k_init_type_vector): New function.
(dbx_lookup_type): Call it when starting new type vector.
* config/i386/tm-i386os9k.h: Define BELIEVE_PCC_PROMOTION.
* (os9k_process_one_symbol): Call define_symbol not os9k_define_symbol.
* os9kstab.c: Removed.
* Makefile.in: Update accordingly.
* objfiles.c (objfile_relocate_data): Removed.
* remote-os9k.c (rombug_wait): Call objfile_relocate
not objfile_relocate_data.
* objfiles.h, objfiles.c: Remove find_pc_objfile.
* remote-os9k.c (rombug_wait): Call find_pc_section not
find_pc_objfile.
* main.c (quit_command): Check inferior_pid; revert Kung change.
* remote-os9k.c (rombug_create_inferior): Set inferior_pid.
config/ns32k/ns32km3.mh: Define NAT_FILE.
* config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
(it was inconsistent and namespace-wrong) to NM_M3_H.
* m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
(m3_open): New function.
(m3_ops): Use it.
* TODO: Update Mach section.
* Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.
an address to 'w'. Make it 'g' or 'h', depending on TARGET_PTR_BIT.
* defs.h: Just typedef CORE_ADDR to bfd_vma. Include bfd.h.
If BFD64, make a LONGEST a BFD_HOST_64_BIT.
* defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead
always just check against INT_MIN and INT_MAX (this also fixes things
if sizeof (long) > sizeof (int), e.g. Alpha).
* config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h:
Don't define LONGEST or BUILTIN_TYPE_LONGEST.
* gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and
BUILTIN_TYPE_UNSIGNED_LONGEST.
* language.h, c-lang.c, ch-lang.c, m2-lang.c: Remove longest_int
and longest_unsigned_int.
* value.h (struct value): Just align to LONGEST, rather than worrying
about CC_HAS_LONG_LONG.
* valarith.c (value_binop, _initialize_valarith): Figure out type
ourself based on sizeof (LONGEST) rather than relying on
BUILTIN_TYPE_LONGEST. The point is that we don't depend on
CC_HAS_LONG_LONG anymore.
* valprint.c (val_print_type_code_int): Just call
extract_unsigned_integer directly, rather than going through
unpack_long.
* printcmd.c (decode_format): Remove code which would sometimes
change 'g' size to 'w' for integers. print_scalar_formatted handles
printing huge integers well enough, thank you.
hppa-tdep.c (pa_print_fp_reg), infcmd.c (do_registers_info),
valops.c (value_assign): Use REGISTER_CONVERT_TO_* only if
REGISTER_CONVERTIBLE is defined, otherwise just copy the content.
Pass desired type to REGISTER_CONVERT_TO_*.
* config/m68k/tm-m68k.h, config/i960/tm-i960.h (REGISTER_CONVERT_*):
Pass length of desired type to store/extract_floating.
* config/i386/tm-arm.h, config/i386/tm-i386aix.h,
config/i386/tm-sun386.h, config/i386/tm-symmetry.h,
config/m88k/tm-m88k.h config/rs6000/tm-rs6000.h (REGISTER_CONVERT_*):
Use extract_floating and store_floating with length of desired type.
* config/m68k/tm-news.h (STORE,EXTRACT_RETURN_VALUE): Add type
parameter to REGISTER_CONVERT_*.
* config/a29k/tm-a29k.h, config/convex/tm-convex.h,
config/gould/tm-np1.h, config/gould/tm-pn.h, config/h8300/tm-h8300.h,
config/h8500/tm-h8500.h, config/i386/tm-i386v.h,
config/mips/tm-mips.h, config/ns32k/tm-merlin.h,
config/ns32k/tm-umax.h, config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
config/sh/tm-sh.h, config/sparc/tm-sparc.h, config/tahoe/tm-tahoe.h,
config/vax/tm-vax.h, config/z8k/tm-z8k.h (REGISTER_CONVERTIBLE,
REGISTER_CONVERT_TO_RAW, REGISTER_CONVERT_TO_VIRTUAL): Remove
versions for which REGISTER_CONVERTIBLE is always false.
* z8k-tdep.c (register_convert_to_virtual, register_convert_to_raw):
Remove, no longer used.
* alpha-tdep.c (alpha_register_convert_to_raw,
alpha_register_convert_to_virtual): New routines to handle
the different raw formats in alpha floating point registers.
* config/alpha/tm-alpha.h (REGISTER_CONVERTIBLE,
REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW): Use them.
config/mips/{mipsm3.mt,mipsm3.mh},
config/ns32k/{ns32km3.mt,ns32km3.mh}: Use correct names for TM_FILE
and XM_FILE. Replace host files *mach3-xdep.o with native
files *m3-nat.o. Replace host file os-mach3.o with native
file m3-nat.o.
remote-mon.c (monitor_create_inferior), remote-nindy.c
(nindy_create_inferior), remote-st.c (st2000_create_inferior),
remote-vx.c (vx_create_inferior): Remove CREATE_INFERIOR_HOOK; it
is replaced by init_trace_fun.
* config/convex/xm-convex.h, convex-xdep.c: Add comments explaining
how to do without CREATE_INFERIOR_HOOK for whoever fixes the Convex
port.
* Makefile.in: Add Mach files to ALLDEPFILES, etc.
* m3-nat.c: Clean up more hair--message(), cprocs.
* configure.in: Recognize Mach targets and hosts.
* config/ns32k/tm-umax.h: Add some #ifndef's so tm-ns32km3.h can
include this file.
* Mach headers in config/*/tm-*.h: Fix includes to match correct
locations of files.
* config/i386/i386mach.c: Explain this is for the old (probably
non-functional and/or obsolete) Mach stuff.
* m3-nat.c, config/nm-m3.h,
i386m3-nat.c, mipsm3-nat.c, ns32km3-nat.c,
config/i386/{i386m3.mh,i386m3.mt,tm-i386m3.h,xm-i386m3.h},
config/i386/{i386mk.mh,i386mk.mt,tm-i386mk.h,xm-i386mk.h},
config/mips/{mipsm3.mh,mipsm3.mt,tm-mipsm3.h,xm-mipsm3.h},
config/ns32k/{ns32km3.mh,ns32km3.mt,tm-ns32km3.h,xm-ns32km3.h}:
New files.
(TARDIRS): Add gdbserver.
* exec.c (print_section_info): Print entry point.
* i386lynx-nat.c (i386lynx_saved_pc_after_call): Move into
i386lynx-tdep.c. Add core file support.
* i386lynx-tdep.c: New module for Lynx/386 target dependant code.
* maint.c: Add `maint info sections' command to print info about all
sections that BFD knows about for exec and core files.
* sparc-tdep.c (sparc_push_dummy_frame): Update stack pointer
before putting frame on the stack. Consolidate writes to reduce
traffic for remote debugging.
* config/i386/i386lynx.mh (NATDEPFILES): Remove exec.o.
* config/i386/i386lynx.mt (TDEPFILES): Add exec.o, i386lynx-tdep.o.
* config/i386/nm-i386lynx.h: Add target_pid_to_str().
* config/i386/tm-i386lynx.h: Remove target_pid_to_str().
* sparclite/Makefile.in: Add deps to keep Sun make happy.
GDBSERVER_DEPFILES. Also remove much (but not all that could be
removed) crud inherited from gdb Makefile.in.
* config/i386/i386lynx.mh, config/sparc/sun4os4.mh: Define GDBSERVER_*.
* gdbserver/README: Say it works on Sun and change configuration
instructions slightly.
but not the others.
* symm-tdep.c: Remove exec_file_command.
[_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions.
A few miscellaneous cleanups.
* symm-nat.c: Renamed from symm-xdep.c.
* All symmetry dependent files: Many changes.
but not the others.
* symm-tdep.c: Remove exec_file_command.
[_SEQUENT_] (ptx_coff_regno_to_gdb, register_addr): New functions.
A few miscellaneous cleanups.
* symm-nat.c: Renamed from symm-xdep.c.
* All symmetry dependent files: Many changes.
* signals.h: Don't undefine signals anymore.
* main.c: Use job_control from serial.h.
* fork-child.c (fork_inferior): Use gdb_setpgid.
* serial.h, ser-unix.c, ser-go32.c: Provide gdb_setpgid.
* utils.c (quit): Use current_target->to_terminal_ours to figure
out whether we care about lack of job control, rather than __GO32__.
* utils.c: Include serial.h not terminal.h
(quit): Use job_control not TIOCGPGRP.
* terminal.h: Don't undefine TIOCGPGRP.
* serial.h, ser-unix.c, ser-go32.c, ser-tcp.c: Add SERIAL_FLUSH_OUTPUT.
* utils.c (quit): Use it.
* serial.h: Add SERIAL_UN_FDOPEN.
* utils.c (quit): Use it.
* ser-unix.c: Add process group to ttystate.
[HAVE_SGTTY]: Add tchars, ltchars, and lmode to ttystate.
* inflow.c: Include serial.h not terminal.h.
Use serial.h stuff to replace most of the maze of #ifdef's.
* inflow.c, main.c, inferior.h: make gdb_has_a_terminal a function.
* serial.h: Document SERIAL_SET_TTY_STATE as being immediate.
* ser-unix.c: Use TIOCSETN not TIOCSETP so it is true.
* serial.h, ser-unix.c, ser-go32.c, ser-tcp.c:
Add SERIAL_PRINT_TTY_STATE, SERIAL_NOFLUSH_SET_TTY_STATE, and
SERIAL_SET_PROCESS_GROUP.
* inflow.c: Use them.
* config/xm-svr4.h, config/rs6000/xm-rs6000.h, config/sparc/sun4os4.h:
Define HAVE_TERMIOS.
* Various: Remove all use of TIOC*_BROKEN.
own tm- & .mt files now. Also add sparclite to configdirs.
* go32-xdep.c: Dummy routines for sigsetmask & strlwr.
* config/i386/go32.mh: Nullify def of TERMCAP.
* config/i386/xm-go32.h: Get rid of redef of EIO.
* config/sparc/{sparclite.mh tm-sparclite.h}: New sparclite
specific configs. Very similar to sun4os4, but without solib.
* sparclite/{Makefile.in configure.in}: First cut at making this
dir configgable.
These implement a new serial line interface for talking to remote
targets.
* configure.in: Link ser-hardwire.c to ser-unix.c for all hosts,
EXCEPT go32, which gets ser-go32.c.
* remote.c: Use new serial interface. More remote-xxx's to be
converted later.
* ser-bsd.c, ser-termios.c: Removed.
* serial.c: New. Implements common operations for all serial
types.
* ser-unix.c: New. Unix specific serial operations for various
flavors of Unix (Posix, SysV, BSD).
* serial.h: Generic serial interface defs.
* config/i386/go32.mh, config/i386/i386bsd.h,
config/m68k/apollo68b.mh, config/sparc/sun4os4.mh: Remove
ser-bsd.o from XDEPFILES. All the magic is now handled in
configure.in.
config files moved to an appropriate config/<cpu> subdirectory.
* nm-*, xm-*, tm-*: All native, host, and target files, which
get linked to nm.h, xm.h, and tm.h respectively by configure,
moved to appropriate config/<cpu> subdirectory.