target_has_stack.
* mi/mi-main.c (mi_execute_command): Avoid calling inferior_thread
when there is no thread selected.
(mi_cmd_execute): Don't special case commands that can run without
a valid selected thread.
* top.c (execute_command): Don't special case commands that can
run without a valid selected thread. Use has_stack_frames.
* infcmd.c (ensure_valid_thread): New.
(continue_1, step_1, jump_command, signal_command): Use it.
(detach_command): Error out if there's no selected thread/inferior.
* thread.c (print_thread_info): Allow having no thread selected.
(switch_to_thread): Don't read the PC if there is no current thread.
(do_restore_current_thread_cleanup): Don't record the current
frame if there is no current thread.
(make_cleanup_restore_current_thread): Don't read frame info if
there is no selected thread.
(_initialize_thread): Don't mark commands as
"no_selected_thread_ok".
* frame.c (get_current_frame): Error out if there is no valid
selected thread.
(has_stack_frames): Return false if there is no valid
selected thread.
* cli/cli-cmds.c (init_cli_cmds): Don't mark commands as
"no_selected_thread_ok".
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): Delete.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): Delete.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Delete declaration.
* stack.c (get_selected_block): Use has_stack_frames.
* mi/mi-interp.c (mi_interpreter_init): Attach mi_about_to_proceed
to the about_to_proceed observer notification.
(mi_about_to_proceed): New.
(mi_on_resume): Only output ^running and the prompt here if the
target was proceeded.
* breakpoint.c (breakpoint_proceeded): New static.
(breakpoint_about_to_proceed): New.
(_initialize_breakpoints): Attach breakpoint_about_to_proceed to
the about_to_proceed observer notification.
* inferior.h (breakpoint_proceeded): Delete declaration.
* infrun.c (clear_proceed_status): Don't set breakpoint_proceeded.
Notify the about_to_proceed observers.
(struct inferior_status): Delete breakpoint_proceeded member.
(save_inferior_status): Don't save it.
(restore_inferior_status): Don't restore it.
* mi-main.h (mi_proceeded): Declare.
* mi/mi-main.c (mi_cmd_execute): Clear mi_proceeded before running
a command.
gdb/doc/
* observer.texi (about_to_proceed): New.
* mi/mi-common.h (struct mi_interp): New, moved from ...
* mi/mi-interp.c: ...here.
* mi/mi-main.c (mi_execute_command): If the thread changed
as result of command, report that.
* mi/mi-main.c (proceed_thread_callback): New.
(mi_cmd_exec_continue): If --thread-group is specified, resume all
threads in that group.
(interrupt_thread_callback): New.
(mi_cmd_exec_interrupt): If --thread-group is specified, interrupt
all threads in that group.
PR mi/2549:
* mi/mi-main.c (get_register): Use get_formatted_print_options.
gdb/testsuite
2008-11-14 Nick Roberts <nickrob@snap.net.nz>
* gdb.mi/gdb2549.exp: New file.
* infrun.c (context_switch): Don't save and load infrun state.
(context_switch_to): Delete.
* infcmd.c (proceed_thread_callback): Replace context_switch_to
calls by switch_to_thread calls.
* gdbthread.h (save_infrun_state, load_infrun_state): Delete.
* thread.c (main_thread_state, main_thread_executing): Delete.
(inferior_thread): Delete references to them.
(add_thread_silent): Fix case where we're adding a thread with the
same ptid as an exited thread. Remove references to
context-switching.
(load_infrun_state, save_infrun_state): Delete.
(thread_alive, is_thread_state, any_running, is_executing)
(set_executing): Remove the special handling for targets that
don't register any thread.
(restore_current_thread, thread_apply_all_command)
(do_captured_thread_select): Unconditionally call
switch_to_thread.
* mi/mi-main.c (mi_cmd_execute): Check for exited threads.
Call switch_to_thread instead of context_switch_to.
* gdbthread.h (find_thread_id): Declare.
* thread.c (find_thread_id): Make non-static.
* mi/mi-main.c (mi_cmd_execute): Switch to the right
thread and frame, if necessary.
* mi/mi-parse.c (mi_parse): Handle --thread and --frame.
* mi/mi-parse.h (strcut mi_parse): New fields thread and frame.
* thread.c (enum thread_state): New.
(thread_state main_thread_running): Delete, in favor of...
(thread_state main_thread_state): ... this. Update throughout.
(clear_thread_inferior_resources): New, split from free_thread.
(free_thread): Call clear_thread_inferior_resources.
(init_thread_list): Set main thread to stopped state.
(add_thread_silent): Take care of PTID reuses.
(delete_thread): If deleting inferior_ptid or a thread with
refcount > 0, mark it as exited, but still keep it in the list.
Only notify of thread exits, if we haven't done so yet.
(iterate_over_threads): Make it safe to delete threads while
iterating over them.
(do_captured_list_thread_ids): Don't account for exited threads.
(thread_alive): Check for the THREAD_EXITED state, and don't set
ptid to -1 on exited threads.
(set_running): Update to account for extra possible states.
(is_thread_state): New.
(is_stopped, is_exited): New.
(is_running): Implement in terms of is_thread_state.
(any_running): Update.
(print_thread_info): Update. Account for exited threads. Don't
warn about missed frame restoring here, its done in the cleanup.
(switch_to_thread): Don't read from a thread that has gone.
(restore_current_thread): In non-stop mode, do a full context
switch.
(restore_selected_frame): Add a frame_level argument. Rewrite.
(struct current_thread_cleanup): Add selected_frame_level and
was_stopped members.
(do_restore_current_thread_cleanup): Check if thread was stopped
and still is, and if the target has registers, stack and memory
before restoring the selected frame. Don't delete the cleanup
argument here.
(restore_current_thread_cleanup_dtor): New.
(make_cleanup_restore_current_thread): Remove all arguments.
Rewrite.
(thread_apply_all_command): Update. Prune threads.
(thread_apply_command): Update.
(thread_command): Account for currently selected exited thread.
(do_captured_thread_select): Check for a running thread. Prune
threads.
(_initialize_thread): Make "info threads", "thread", "thread
apply", and "thread apply all" appliable without a selected thread.
* gdbthread.h (struct thread_info): Replace running_ by state_.
Add refcount.
(is_exited, is_stopped): Declare.
(make_cleanup_restore_current_thread): Remove all arguments.
* infrun.c: Include "event-top.h".
(fetch_inferior_event): In non-stop mode, restore selected thread
and frame after handling the event and running breakpoint
commands. Display GDB prompt if needed.
(normal_stop): In non-stop mode, don't print thread switching
notice.
* cli/cli-decode.c (set_cmd_no_selected_thread_ok)
(get_cmd_no_selected_thread_ok): New.
* cli/cli-decode.h (CMD_NO_SELECTED_THREAD_OK): New.
(set_cmd_no_selected_thread_ok, get_cmd_no_selected_thread_ok):
Declare.
* cli/cli-cmds.c: Set "pwd", "help", "info", "show" as
no-selected-thread ok.
* top.c (execute_command): Check for non no-selected-thread-ok
commands.
* linux-nat.c (struct saved_ptids, threads_to_delete)
(record_dead_thread, prune_lwps): Delete.
(exit_lwp): Unconditionally delete thread.
(linux_nat_resume): Remove prune_lwps call.
* infcmd.c (proceed_thread_callback): Check if !is_stopped instead
of is_running. Adjust to make_cleanup_restore_current_thread
interface change.
* mi/mi-main.c (mi_cmd_execute): Only allow a few commands if the
selected thread has exited.
* inf-loop.c (inferior_event_handler): Don't display the prompt
here.
* varobj.c (c_value_of_root): Update.
* defs.h (make_cleanup_dtor): Declare.
* utils.c (make_cleanup_dtor): New.
* Makefile.in (infrun.o): Depend on $(event_top_h).
* gdbthread.h: Remove unneeded forward declarations.
Include "inferior.h".
(struct thread_info): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi and stop_signal members.
(save_infrun_state): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat parameters.
(load_infrun_state): Add continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat parameters.
* thread.c (load_infrun_state): In non-stop mode, load
continuations, intermediate_continuations, proceed_to_finish,
step_over_calls, stop_step, step_multi and stop_signal.
(save_infrun_state): Store continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(save_infrun_state): Store continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(free_thread): Clear The thread's stop_bpstat.
* inferior.h (context_switch_to): Declare.
* infrun.c (ecss): New global.
(context_switch): Context switch continuations,
intermediate_continuations, proceed_to_finish, step_over_calls,
stop_step, step_multi, stop_signal and stop_bpstat.
(wait_for_inferior): Use global ecss.
(async_ecss, async_ecs): Delete.
(fetch_inferior_event): Use global ecss.
(context_switch_to): New.
* top.c (execute_command): In non-stop, only check if the current
thread is running, in all-stop, check if there's any thread
running.
* breakpoint.c (bpstat_remove_breakpoint): New.
(bpstat_remove_breakpoint_callback): New.
(delete_breakpoint): Clear the stop_bpstats of all threads.
* mi/mi-main.c (mi_cmd_execute): In non-stop, only check if the
current thread is running, in all-stop, check if there's any
thread running.
* Makefile.in (gdbthread_h): Depend on $(inferior_h).
* inferior.h (target_executing): Delete.
* gdbthread.h (struct thread_info): Add executing_ field.
(set_executing, is_executing): New.
* thread.c (main_thread_executing): New.
(init_thread_list): Clear it and also main_thread_running.
(is_running): Return false if target has no execution.
(any_running, is_executing, set_executing): New.
* top.c: Include "gdbthread.h".
(target_executing): Delete.
(execute_command): Replace target_executing check by any_running.
* event-top.c: Include "gdbthread.h".
(display_gdb_prompt, command_handler): Replace target_executing by
is_running.
* inf-loop.c: Include "gdbthread.h". Don't mark as not executing
here. Replace target_executing by is_running.
* infrun.c (handle_inferior_event): Mark all threads as
not-executing.
* linux-nat.c (linux_nat_resume): Don't mark thread as executing
here.
* stack.c (get_selected_block): Return null if inferior is
executing.
* target.c (target_resume): Mark resumed ptid as executing.
* breakpoint.c (until_break_command): Replace target_executing
check by is_executing.
* remote.c (remote_async_resume): Don't mark inferior as executing
here.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Replace target_executing
by any_running.
* mi/mi-main.c (mi_cmd_exec_interrupt, mi_cmd_execute)
(mi_execute_async_cli_command): Replace target_executing by
is_running.
* frame.c (get_current_frame): Error out if the current thread is
executing.
(has_stack_frames): New.
(get_selected_frame, deprecated_safe_get_selected_frame): Check
has_stack_frames.
* Makefile.in (event-top.o, frame.o, inf-loop.o, top.o): Depend on
$(gdbthread_h).
-target-download and -target-select via CLI, so that
the quoting rules are the same as they were (unfortunately)
in all prior gdb releases.
* mi/mi-cmds.h (mi_cmd_exec_run, mi_cmd_exec_until)
(mi_cmd_target_download, mi_cmd_target_select): Remove.
* mi/mi-main.c (mi_cmd_exec_run, mi_cmd_exec_until)
(mi_cmd_target_download, mi_cmd_target_select): Remove.
(mi_cmd_execute): Set current_token even for commands
routed via CLI.
(captured_mi_execute_command_args): Remove.
(captured_mi_execute_command): Cast the closure to mi_parse
pointer, not to captured_mi_execute_command_args, and don't
set the action field thereof.
(mi_execute_command): Pass struct mi_parse, not
captured_mi_execute_command_args to captured_mi_execute_command.
(mi_execute_command): Remove (dead) code for suppressing
printing prompt.
* mi/mi-interp.c (mi_cmd_interpreter_exec): Do no print
^running here.
(mi_on_resume): Print ^running if not previously output.
* mi/mi-main.c (running_result_record_printed): New.
(captured_mi_execute_command): Reset
running_result_record_printed. Use running_result_record_printed
to decide if we should skip ^done.
(mi_execute_async_cli_command): Don't print ^running here.
* mi/mi-main.h (current_token, running_result_record_printed):
Declare.
Adjust all prototypes using mi_cmd_args_ftype to use
mi_cmd_argv_ftype.
(struct mi_cmd): Remove the args_func field.
* mi/mi-cmds.c: Don't provide value for the args_func field.
* mi/mi-main.c (mi_execute_async_cli_command)
(mi_cmd_exec_run, mi_cmd_exec_next, mi_cmd_exec_next_instruction)
(mi_cmd_exec_step, mi_cmd_exec_step_instruction)
(mi_cmd_exec_finish, mi_cmd_exec_until, mi_cmd_exec_return)
(mi_cmd_exec_continue, mi_cmd_exec_interrupt)
(mi_cmd_target_download): Adjust.
(mi_cmd_target_select): Adjust. Pass 0 for from_tty parameter.
(mi_cmd_execute): Do not check for args_func.
(mi_execute_async_cli_command): Adjust.
* mi/mi-parse.c: Don't check for args_func.
(previous_async_command): Remove.
(mi_cmd_gdb_exit): Adjust.
(mi_cmd_exec_interrupt): Don't dance with previous_async_command.
(mi_cmd_target_select): Adjust.
(mi_cmd_execute): Don't set previous_async_command. Free token
here even in async mode.
(mi_execute_async_cli_command): Adjust.
(mi_exec_async_cli_cmd_continuation): Adjust. Do not free the
token.
(mi_load_progress): Adjust.
* breakpoint.c (until_break_command_continuation): Add
the 'error' parameter. Directly delete the breakoint as
opposed to running cleanups.
(until_break_command): Install continuation only
after starting the target. Don't use exec cleanups,
use ordinary cleanups. Discard cleanups is successfully
started the target in async mode.
(make_cleanup_delete_breakpoint): Remove.
* breakpoint.h (make_cleanup_delete_breakpoint): Remove
declaration.
* defs.h (do_exec_cleanups, make_exec_cleanup): Remove
declarations.
(struct continations): Add the 'error' parameter to the
continuation_hook field.
(add_continuation, do_all_continuations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): Add the 'error' parameter.
* exceptions.c (throw_exception): Don't call do_exec_cleanups.
* inf-loop.c (inferior_event_handler): Instead of calling
discard_all_continuations, use do_all_continuations with 1 as
'error' parameter. Pass 0 as 'error' parameter in existing uses
of discard_all_continuations.
* infcmd.c (step_1): Do not use exec cleanup. For async case, discard
cleanups.
(step_once): Install continuation only after resuming the target.
(step_1_continuation): Disable longjmp breakpoint on error.
(finish_command_continuation): Add the error parameter. Delete
the finish breakpoint directly, do not use cleanups.
(finish_command): Do not use exec_cleanups. Always setup
continuation. For sync case, immediately run them.
(attach_command_continuation): Add the error parameter.
* infrun.c (fetch_inferior_event): Do not use exec cleanups to
remove step_resume_breakpoint -- adjust delete it directly.
* interps.c (interp_set): Adjust call to do_all_continations.
* mi/mi-interp.c (mi_interpreter_exec_continuation): Do not
do exec cleanups.
* mi/mi-main.c (mi_cmd_target_select): Do not do exec
cleanups.
(mi_cmd_execute): Do not use exec_cleanup.
(mi_execute_async_cli_command): Simplify the string concatenation
logic. Do no use exec cleanup.
(mi_exec_async_cli_cmd_continuation): New parameter error.
Free last_async_command.
* top.c (command_line_handler_continuation): New parameter error.
* utils.c (exec_cleanup_chain, make_exec_cleanup)
(do_exec_cleanups): Remove.
(add_continuation, do_all_continations)
(add_intermediate_continuation)
(do_all_intermediate_continuations): New parameter error.
* gdbthread.h (print_thread_info): Declare.
* thread.c (print_thread_info): New, extracted
from info_threads_command and adjusted to
work for CLI and MI.
(info_threads_command): Use print_thread_info.
* Makefile.in: Update dependencies.
* mi/mi-cmds.c (mi_cmds): Specify a handler
for -thread-info.
* mi/mi-cmds.h (mi_cmd_thread_info): Declare.
* mi/mi-main.c (mi_cmd_thread_info): New.
(mi_cmd_list_features): Include 'thread-info'.
Tom Tromey