(GDBTK_LIBRARY): New variable to point to location where
gdbtk will install its tcl library. Changed all refereneces
to $(datadir)/insight1.0 to $(GDBTK_LIBRARY).
(SUBDIR_GDBTK_ALL): Remove "all-gdbtk". No longer needed.
(SUBDIR_GDBTK_CLEAN): Remove "clean-gdbtk". No longer needed.
(all-gdbtk): Remove.
(install-gdbtk): Remove.
(gdbtk.o): Pass srcdir to file when compiling.
Also from Ian Roxborough:
* Makefile.in: Changed all references to the install directory
"gdbtcl" to read "insight1.0".
H.J. Lu (hjl@gnu.org)
* partial-stab.h: valu should be a CORE_ADDR.
2001-08-14 H.J. Lu (hjl@gnu.org)
* dbxread.c (SWAP_SYMBOL): Removed.
(INTERNALIZE_SYMBOL): Check sign extended vma.
floatformat_from_doublest. Make static.
(convert_floatformat_to_doublest): Rename floatformat_to_doublest.
Make static.
(floatformat_to_doublest): New function.
(floatformat_from_doublest): New function.
(host_float_format, host_double_format, host_long_double_format):
New static variables.
(store_floating, extract_floating): Always use
floatformat_to_doublest and floatformat_from_doublest.
* doublest.h (HOST_LONG_DOUBLE_FORMAT): Delete macro.
* regcache.c (legacy_write_register_gen): Don't 'optimize out'
a write_register to a pseudo-reg. Target_store_pseudo_register
needs to get called, because these regs may be computed and may
have side-effects.
`enable' and `disable' identifiers, because some platforms define
in their system headers symbols with global scope that go by those
names.
* breakpoint.h (enum enable_state): Rename from `enum enable'.
Also rename all the enum members to have the "bp_" prefix.
(struct breakpoint): Rename the `enable' member to `enable_state'.
(enum bpdisp): Rename all members to have the "disp_" prefix.
* breakpoint.c: All users of `enum enable' and `enum bpdisp'
changed.
(args_for_catchpoint_enable): Rename the `enable' member to
`enable_p'. All users changed.
* tracepoint.h (enum enable): Remove.
(struct tracepoint): The member `enabled' is now `int enabled_p'.
* tracepoint.c: All users of the `enabled' member changed.
* printcmd.c (struct display): The `status' member is now an int.
* memattr.h (struct mem_region): Rename the `status' member to
`enabled_p'.
(enum enable): Remove.
* memattr.c: Change all users of the `status' member of struct
mem_region to use `enabled_p' instead.
* infcmd.c (run_stack_dummy): Use disp_del instead of del.
* go32-nat.c: Remove the kludgey work-around for conflicts between
<dos.h> and "breakpoint.h".
* tui/tuiSourceWin.c: Use disp_del instead of del.
* tui/tuiSource.c: Use disp_del instead of del.
* tui/tuiDisassem.c: Use disp_del instead of del.
paramter a const void pointer.
(floatformat_from_doublest): Make IN const, Make OUT a void
pointer.
* doublest.c (floatformat_to_doublest): Update.
(floatformat_from_doublest): Update.
(extract_floating): Update.
(parser_defs_h, dis_asm_h, annotate_h, gdbthread_h): Define.
Replace parser-defs.h with $(parser_defs_h). Replace $(dis-asm_h)
and $(dis-asm.h) with $(dis_asm_h). Replace annotate.h with
$(annotate_h). Replace target.h with $(target_h). Replace
gdbthread.h with $(gdb_thread_h). Replace symfile.h with $(symfile_h).
* config/i386/xm-fbsd.h: Removed.
* config/i386/xm-linux.h: Removed.
* config/i386/fbsd.mh: Reorganize a bit.
(XM_FILE): Set to xm-i386.h instead of xm-fbsd.h.
* config/i386/linux.mh (XM_FILE): Set to xm-i386.h insread of
xm-linux.h.
assertion with a warning if we're asked to convert towards a
non-floating-point type. Zero out the the buffer where the data
is supposed to be stored in that case.
(i386_register_convert_to_virtual): Fix such that it can handle
conversion to any floating-point type. Assert that we are dealing
with a floating-point first.
(i386_register_convert_to_raw): Assert that TYPE is a
floating-point type with length 12.
(AC_FUNC_SETPGRP): Add.
* aclocal.m4, configure, config.in: Regenerated.
* inflow.c (gdb_setpgid): Get rid of NEED_POSIX_SETPGID and
SETPGRP_ARGS. Always use setpgid if it is available, fall back on
setpgrp if it isn't. Use SETPGRP_VOID (defined by autoconf) to
distinguish between the two setpgrp flavours.
* config/xm-sysv4.h, config/arm/xm-linux.h,
config/i386/xm-i386aix.h, config/i386/xm-sco.h,
config/i386/xm-linux.h, config/i386/xm-ptx.h,
config/m68k/xm-linux.h, config/powerpc/xm-linux.h,
config/sparc/xm-linux.h, config/sparc/xm-sun4sol2.h,
config/ia64/xm-linux.h (NEED_POSIX_SETPGID): Remove.
* config/rs6000/xm-rs6000.h (SETPGRP_ARGS): Remove.
by appropriate warning hook.
(print_source_lines): Remove tui hacks, must be replaced by cli.
(forward_search_command): Remove tui hacks, can be replaced by
appropriate calls to identify_source_line when tui scrolls.
(reverse_search_command): Likewise.
call to chdir on this symbol rather than on __DJGPP__.
(CANT_FORK) [__MSDOS__]: Move from here...
* defs.h (CANT_FORK) [__MSDOS__]: ...to here.
(GLOBAL_CURDIR) [__MSDOS__]: Define.
* top.c (quit_cover, float_handler): Move definition up before use.
(gdb_init): Move to end of file, to avoid calls to not yet defined
functions.
Delete prototypes.
* top.c (command_loop): Remove tui insert_mode hacks; don't call
tuiCleanUp because this must be made with atexit by tui.
* symfile.c (symbol_file_command): Remove call to TUIDO
* stack.c (show_and_print_stack_frame_stub): Remove tui check;
not necessary when using the selected frame hooks.
(print_stack_frame_stub): Likewise.
(print_frame_info_base): Likewise.
(print_frame_info): Likewise.
(up_silently_command): Likewise.
(down_silently_command): Likewise.
(show_stack_frame): Likewise for TUIDO.
(select_frame): Likewise.
(select_and_print_frame): Likewise.
(stack_publish_stopped_with_no_frame): Remove.
(select_and_maybe_print_frame): Remove.
* main.c (captured_main): Remove tui_fileopen and tuiInit; tui
must use the initialize ui hook.
* infrun.c (normal_stop): Remove call to TUIDO; tui must use the
selected frame hooks.
* event-top.c (command_handler): Remove tui insert_mode hack.
* defs.h: Remove TUIDO; Only include tui.h.
* breakpoint.c (mention): Remove calls to TUIDO.
(delete_breakpoint): Remove tui hacks; tui must install
the breakpoint hooks.
* remote-e7000.c (fetch_regs_from_dump): If register set is null,
generate an internal error.
(e7000_fetch_registers): Initialize variable 'wanted'.
(e7000_wait): Initialize variable 'wanted_nopc'.
(e7000_store_register): Fix sprintf compiler warnings.
(sub2_from_pc): Ditto.
(e7000_open): Close the descriptor, not the name.
(e7000_load): Fix compiler warnings.
(sub2_from_pc): Ditto.
* Makefile.in (remote-e7000.o): Can now compile with -Werror.
<sys/sysctl.h>.
(store_inferior_registers): Wrap long line.
(i386bsd_dr_get_status): Fix typo in comment.
(_initialize_i386bsd_nat): New function. * i386bsd-tdep.c: New
file. * config/i386/tm-fbsd.h (IN_SIGTRAMP): New define.
(i386bsd_in_sigtramp): New prototype.
(SIGTRAMP_START, SIGTRAMP_END): Redefine in terms...
(i386bsd_sigtramp_start, i386bsd_sigtramp_end): ...these new
(external) variables.
(SIGCONTEXT_PC_OFFSET): Removed.
(FRAME_SAVED_PC): New define.
(i386bsd_frame_saved_pc): New function. * config/i386/fbsd.mt
(TDEPFILES): Add i386bsd-tdep.o.
signals. Use that in favour of the old code to get rid of
superfluous SIGINTs.
(lin_lwp_wait): Use the new support in stop_wait_callback to
flush all but one SIGINT.
config/m68k/xm-linux.h, config/powerpc/xm-linux.h,
config/sparc/xm-linux.h, config/ia64/xm-linux.h (HAVE_TERMIOS):
Removed. Taken care of by autoconf and terminal.h.
* config/sh/tm-sh.h (struct gdbarch_tdep): Add
FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
PR_REGNUM fields.
* sh-tdep.c (sh_skip_prologue_hard_way): Rename from
skip_prologue_hard_way().
(skip_prologue_hard_way): Make it a function pointer.
(sh_print_register): Use function pointer do_pseudo_register,
instead of sh_do_pseudo_register.
(sh_do_registers_info): Ditto.
(sh_gdbarch_init): Initialize do_pseudo_register.
(IS_MOV_TO_R14): Rename from IS_MOV_R14.
(skip_prologue_hard_way): Update.
(sh_gdbarch_init): Move setting of frame_chain,
get_saved_register, init_extra_frame_info, push_arguments,
extract_return_value, pop_frame, store_struct_return,
extract_struct_value_address, use_struct_convention,
init_extra_frame_info to before target specific settings.
(sh_gdbarch_init): Initialize new tdep fields
FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
PR_REGNUM.
(sh_push_arguments): Use new gdbarch_tdep fields
{ARG0,ARGLAST}_REGNUM.
(sh_saved_pc_after_call, sh_nofp_frame_init_saved_regs,
sh_init_extra_frame_info, sh_push_return_address,
sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): Update to use
gdbarch_tdep->PR_REGNUM.
(dr_reg_base_num, fv_reg_base_num): Move to earlier in the file.
of SIGIO.
(input_interrupt): Don't block on read, in case we got redundant
SIGIO. Don't gripe about redundant SIGIO.
* gdbserver/low-hppabsd.c (mywait): Use waitpid(). Enable SIGIO
handler while waiting.
* gdbserver/low-linux.c (mywait): Likewise.
* gdbserver/low-nbsd.c (mywait): Likewise.
* gdbserver/low-sparc.c (mywait): Likewise.
(go32_info_dos_command): New function.
(_initialize_go32_nat): Convert all DOS-specific commands into
subcommands of "info dos". Suggested by Andrew Cagney
<ac131313@redhat.com>.
reasonable defaults for REALTIME_LO and REALTIME_HI if they're not
already defined.
* config/nm-linux.h: Include <signal.h>.
[__SIGRTMIN] (REALTIME_LO, REALTIME_HI): Define to __SIGRTMIN and
(__SIGRTMAX + 1) respectively.
longer disagree on how big pointers are.
* findvar.c (value_from_register): Remove special case code for D10V.
* printcmd.c (print_frame_args): Same.
* valops.c (value_at, value_fetch_lazy): Same.
* values.c (unpack_long): Same.
* gdbarch.sh: Changes to effect the following:
* gdbarch.h (GDB_TARGET_IS_D10V, D10V_MAKE_DADDR,
gdbarch_d10v_make_daddr_ftype, gdbarch_d10v_make_daddr,
set_gdbarch_d10v_make_daddr, D10V_MAKE_IADDR,
gdbarch_d10v_make_iaddr_ftype, gdbarch_d10v_make_iaddr,
set_gdbarch_d10v_make_iaddr, D10V_DADDR_P,
gdbarch_d10v_daddr_p_ftype, gdbarch_d10v_daddr_p,
set_gdbarch_d10v_daddr_p, D10V_IADDR_P,
gdbarch_d10v_iaddr_p_ftype, gdbarch_d10v_iaddr_p,
set_gdbarch_d10v_iaddr_p, D10V_CONVERT_DADDR_TO_RAW,
gdbarch_d10v_convert_daddr_to_raw_ftype,
gdbarch_d10v_convert_daddr_to_raw,
set_gdbarch_d10v_convert_daddr_to_raw, D10V_CONVERT_IADDR_TO_RAW,
gdbarch_d10v_convert_iaddr_to_raw_ftype,
gdbarch_d10v_convert_iaddr_to_raw,
set_gdbarch_d10v_convert_iaddr_to_raw): Delete declarations.
* gdbarch.c: Delete the corresponding definitions.
(struct gdbarch): Delete members d10v_make_daddr,
d10v_make_iaddr, d10v_daddr_p, d10v_iaddr_p,
d10v_convert_daddr_to_raw, and d10v_convert_iaddr_to_raw.
(startup_gdbarch): Remove initializers for the above.
(verify_gdbarch, gdbarch_dump): Don't verify or dump them any
more.
* d10v-tdep.c (d10v_register_virtual_type): Rather that
claiming the stack pointer and PC are 32 bits long (which they
aren't), say that the stack pointer is an int16_t, and the
program counter is a function pointer. This allows the rest
of GDB to make the appropriate conversions between the code
pointer format and real addresses.
(d10v_register_convertible, d10v_register_convert_to_virtual,
d10v_register_convert_to_raw): Delete function; no registers
are convertible now, so we use
generic_register_convertible_not instead.
(d10v_address_to_pointer, d10v_pointer_to_address): New gdbarch
methods.
(d10v_push_arguments, d10v_extract_return_value): Remove special
cases for code and data pointers.
(d10v_gdbarch_init): Set gdbarch_ptr_bit to 16, so that GDB and
the target agree on how large pointers are. Say that addresses
are 32 bits long. Register the address_to_pointer and
pointer_to_address conversion functions. Since no registers are
convertible now, register generic_register_convertible_not as the
gdbarch_register_convertible method instead of
d10v_register_convertible. Remove registrations for
d10v_register_convert_to_virtual,
d10v_register_convert_to_raw, gdbarch_d10v_make_daddr,
gdbarch_d10v_make_iaddr, gdbarch_d10v_daddr_p,
gdbarch_d10v_iaddr_p, gdbarch_d10v_convert_daddr_to_raw, and
gdbarch_d10v_convert_iaddr_to_raw.
include of "serial.h".
* Makefile.in (remote_utils_h): Update.
* monitor.h (struct serial): Declare as opaque. Remove include of
"serial.h".
(struct monitor_ops): Replace serial_t with `struct serial *'.
* monitor.c (monitor_desc): Ditto.
(read_memory_region, get_descriptor, display_descriptor)
(go32_sldt, go32_sgdt, go32_sidt): New functions.
(top-level): Include ctype.h, utsname.h, dos.h, and go32.h. Ifdef
away `disable' from dos.h, since breakpoint.h defines an enum
member of the same name, and GCC 2.7.2 barfs.
(_initialize_go32_nat): Provide new commands dos-sysinfo, dos-ldt,
dos-gdt, and dos-idt, all of them in the "info" class
Testing: I tested on native Red Hat Linux 7 using gcc 3.0.
The "info float" command exercises print_i387_value.
2001-07-06 Michael Chastain <chastain@redhat.com>
* i387-tdep.c (print_i387_value): Fix pointer glitch.
===
Index: i387-tdep.c
===================================================================
RCS file: /cvs/src/src/gdb/i387-tdep.c,v
retrieving revision 1.11
diff -c -1 -0 -p -r1.11 i387-tdep.c
*** gdb/i387-tdep.c 2001/07/04 21:14:05 1.11
--- gdb/i387-tdep.c 2001/07/06 12:47:00
*************** print_i387_value (char *raw)
*** 163,184 ****
DOUBLEST value;
int len = TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT;
char *tmp = alloca (len);
/* This code only works on targets where ... */
gdb_assert (TARGET_LONG_DOUBLE_FORMAT == &floatformat_i387_ext);
/* Take care of the padding. FP reg is 80 bits. The same value in
memory is 96 bits. */
gdb_assert (FPU_REG_RAW_SIZE < len);
! memcpy (&tmp, raw, FPU_REG_RAW_SIZE);
! memset (&tmp + FPU_REG_RAW_SIZE, 0, len - FPU_REG_RAW_SIZE);
/* Extract the value as a DOUBLEST. */
/* Use extract_floating() rather than floatformat_to_doublest().
The latter is lossy in nature. Once GDB gets a host/target
independent and non-lossy FP it will become possible to bypass
extract_floating() and call floatformat*() directly. Note also
the assumptions about TARGET_LONG_DOUBLE above. */
value = extract_floating (tmp, len);
/* We try to print 19 digits. The last digit may or may not contain
--- 163,184 ----
DOUBLEST value;
int len = TARGET_LONG_DOUBLE_BIT / TARGET_CHAR_BIT;
char *tmp = alloca (len);
/* This code only works on targets where ... */
gdb_assert (TARGET_LONG_DOUBLE_FORMAT == &floatformat_i387_ext);
/* Take care of the padding. FP reg is 80 bits. The same value in
memory is 96 bits. */
gdb_assert (FPU_REG_RAW_SIZE < len);
! memcpy (tmp, raw, FPU_REG_RAW_SIZE);
! memset (tmp + FPU_REG_RAW_SIZE, 0, len - FPU_REG_RAW_SIZE);
/* Extract the value as a DOUBLEST. */
/* Use extract_floating() rather than floatformat_to_doublest().
The latter is lossy in nature. Once GDB gets a host/target
independent and non-lossy FP it will become possible to bypass
extract_floating() and call floatformat*() directly. Note also
the assumptions about TARGET_LONG_DOUBLE above. */
value = extract_floating (tmp, len);
/* We try to print 19 digits. The last digit may or may not contain
commented with "paranoia" into gdb_assert.
(select_event_lwp_callback): Likewise.
(cancel_breakpoints_callback): Bail out early if LP is the event
LWP. Add comment about backup up breakpoints. Fix formatting and
debug message.
(select_event_lwp): Make solely repsonsible for switching event
LWP. Fix formatting and remove bogus "ERROR" debug message.
Don't backup breakpoints from here.
(lin_lwp_wait): Don't touch LP->status, let select_event_lwp
handle that. Only call select_event_lwp if we're not waiting for
a specific LWP, i.e. when PID == -1. Backup breakpoints from here.
* lin-lwp.c: Prevent thread starvation by using a monte carlo
method to choose which of several event threads to handle next.
(stop_wait_callback): Defer pushback of breakpoint events until
later; add SIGTRAP events to the queue of unhandled events.
Keep calling waitpid until SIGSTOP retrieved. If more than one
non-SIGSTOP event is retrieved, push them back onto the process
queue using kill.
(count_events_callback, select_singlestep_lwp_callback,
select_event_lwp_callback, cancel_breakpoints_callback,
select_event_lwp): New functions. Implement monte carlo method
for selecting which of several SIGTRAP threads to handle next.
Push back the breakpoint event for all threads other than the
selected one.
(lin_lwp_wait): Call select_event_lwp to decide which of several
sigtrapped lwps to handle next.
(resume_callback): Disable code that attempts to handle
step_resume breakpoints. Let core gdb handle this.
show_regs, d10v_read_pc, d10v_write_pc, d10v_read_sp,
d10v_write_sp, d10v_write_fp, d10v_read_fp,
d10v_push_return_address): Call the functions d10v_make_daddr,
d10v_make_iaddr, d10v_convert_iaddr_to_raw, and
d10v_convert_daddr_to_raw, not the global macros D10V_MAKE_DADDR,
D10V_MAKE_IADDR, D10V_CONVERT_IADDR_TO_RAW, and
D10V_CONVERT_DADDR_TO_RAW.
structure and not macros.
(Host Definition): Document that much of this chapter is obsolete.
(Target Architecture Definition): Update list of files that make
up a target architecture.
(Coding): Update.
(read_partial_die): Delete fourth argument; we return this info in
the struct partial_die_info object itself now.
(dwarf2_build_psymtabs_hard, scan_partial_symbols): Use the
has_pc_info field of the partial die struct, rather than passing a
variable by reference to read_partial_die.
code in loop condition. This seemed to be trying to round
info_ptr up to the next four-byte boundary, but that's not what it
actually did. If we discover the problem the old code was really
trying to address, we can fix it properly.
* thread-db.c (attach_thread): Check for TD_THR_ZOMBIE in addition
to TD_THR_UNKNOWN when looking for defunct zombie threads.
(thread_db_thread_alive): Ditto.
(find_new_threads_callback): Ditto.
(get_hex_word): Don't use HOST_BYTE_ORDER.
(array_fetch_registers): Add variable ``reg''. Use
store_unsigned_integer to byte-swap the register. Delete unused
local ``regs''.
* infrun.c (handle_inferior_event): Replace prev_pc test in all
calls to bpstat_stop_status (removed in 1999-09-24). This test
helps distinguish stepping over a breakpoint trap from stepping
thru a jump to the instruction after a breakpoint trap.
(handle_inferior_event): Don't bother writing the PC if
DECR_PC_AFTER_BREAK is zero (optimization).
* breakpoint.c (bpstat_stop_status): Add comment explaining the
purpose and usage of the "not_a_breakpoint" argument in computing
the breakpoint address.
* monitor.c (setmem_resp_delim_pattern): New regexp pattern.
(setreg_resp_delim_pattern): Likewise.
(setmem_resp_delim_fastmap): New buffer.
(setreg_resp_delim_fastmap): Likewise.
(monitor_open): Initialize above regexp if they are defined.
(monitor_write_memory): Use regexp to check the result of write.
(monitor_store_register): Likewise to check result of register set.
* infrun.c: Eliminate the "thread_step_needed" state variable,
and replace it with a relatively simple test in resume.
(resume): Replace thread_step_needed logic with a test for
stepping, breakpoint_here_p and breakpoints_inserted.
Move CANNOT_STEP_BREAKPOINT logic to after thread_step logic.
(proceed): Discard thread_step_needed logic.
(wait_for_inferior, fetch_inferior_event, handle_inferior_event):
Discard thread_step_needed logic.
* remote-rdi.c (arm_rdi_wait): Fix return type in prototype.
* rdi-share/host.h: Add missing parenthesis in conditional.
2001-06-22 J.T. Conklin <jtc@redback.com>
* configure.in: include nlist.h when checking for member som_addr
in struct so_map.
* configure: regenerate.
definitions. Generate an error when both pure multi-arch and
"tm.h".
* gdbarch.h, gdbarch.c: Regenerate.
* defs.h (GDB_MULTI_ARCH_TM): Rewrite definition.
* infrun.c (context_switch): New function. Abstract the operation
of saving and restoring infrun's state when switching threads.
(handle_inferior_event): Normalize the handling of the 'thread hop'
event (when the wrong thread hits a thread-specific breakpoint,
and we need to solo-step that thread past the breakpoint).
Call keep_going, instead of target_resume. Handle the subsequent
singlestep-trap as a normal event instead of just resuming.
(EXTRACT_STRUCT_VALUE_ADDRESS): Change to a function with
predicate.
* gdbarch.h, gdbarch.c: Regenerate.
* values.c (value_being_returned): Change the reference to
EXTRACT_STRUCT_VALUE_ADDRESS_P to a function call.
* remote.c (show_remote_protocol_qSymbol_packet_cmd,
set_remote_protocol_qSymbol_packet_cmd): New functions.
(init_all_packet_configs, show_remote_cmd): Add qSymbol packet.
(remote_check_symbols): New function. Implement qSymbol packet,
allowing target to request symbol lookup service from gdb.
(remote_open_1, remote_async_open_1): Call remote_check_symbols,
allowing symbol lookup from exec_bfd on connection to target.
(remote_new_objfile): New function. Catch new objfile notifications
from shared library module, and call remote_check_symbols.
(_initialize_remote): Hook remote_new_objfile into the shared
library notification chain. Add "set remote symbol-lookup" command.
* gdbthread.h (struct thread_info): Add new fields:
current_line, current_symtab, step_sp, for saved infrun state.
* thread.c (save_infrun_state, load_infrun_state): Save and
restore current_line, current_symtab, and step_sp.
(add_thread): Rather than adding assignments to initialize
the new fields, just use memset (tp, 0, sizeof (*tp).
This way future new fields will not be overlooked.
* infrun.c (handle_inferior_event): Save and restore save_sp,
current_line, and current_symtab when switching threads.
(line_completion_function): If we are completing on locations,
back up the start of word pointer past all characters which can
appear in a location spec.
(location_completer): New function.
* completer.h: Add prototype for location_completer.
* symtab.c (make_source_files_completion_list)
(add_filename_to_list, not_interesting_fname): New functions.
(filename_seen): New function, body extracted from
output_source_filename.
(output_source_filename): Call filename_seen to check if the file
was already printed.
(make_symbol_completion_list): If TEXT includes a
double-quoted string, return an empty list, not NULL.
(make_file_symbol_completion_list): New function, similar to
make_symbol_completion_list but with an additional argument
SRCFILE.
* symtab.h (make_file_symbol_completion_list)
(make_source_files_completion_list): Add prototypes.
* breakpoint.c (_initialize_breakpoint): Make location_completer
be the completion function for all commands which set breakpoints
and watchpoints.
(top-level): #include "completer.h".
* tracepoint.c (_initialize_tracepoint): Make location_completer
be the completion function for the "trace" command.
(top-level): #include "completer.h".
* printcmd.c (_initialize_printcmd): Make location_completer be
the completion function for the "print", "inspect", "call", and
"disassemble" commands.
(top-level): #include "completer.h".
* infcmd.c (_initialize_infcmd): Make location_completer be the
completion function for the "go", "jump", and "until" commands.
(top-level): #include "completer.h".
* breakpoint.c (delete_breakpoint): Pass mark_inserted to
remove_breakpoint, so that the subsequent test for
bpt->inserted will succeed, and duplicates will be fixed up.
a little more portable.
Don't use shell's echo command to put strings containing
escaped characeters into a file -- different flavors of /bin/sh
require differnt levels of escaping. Use cat <<EOF instead.
Our internal field separator is a colon. Change all
commands which assume it is a space.
(iterate_over_lwps): Make sure we can handle CALLBACK deleting the
LWP it's called for.
(lin_lwp_attach): Mark LWP as resumed to make sure the fake
SIGSTOP is reported.
(resume_clear_callback): New function.
(resume_set_callback): New function.
(lin_lwp_resume): Mark all LWP's that we're going to resume as
resumed, and unmark all others.
(status_callback): Only report a pending wait status if we pretend
that LP has been resumed.
(resumed_callback): New function.
(lin_lwp_wait): Add assertions to check that LWP's are properly
marked as resumed. Partially revert 2001-05-25 patch by Michael
Snyder: do not resume all threads. Add comment explaining the
problems associated with this bit of code.
* config/mips/irix6.mh: New file.
* config/mips/irix6.mt: New file.
* config/mips/xm-irix6.h: New file.
* config/mips/nm-irix6.h: New file.
* mips-tdep.c (mips_gdbarch_init) <MIPS_ABI_N32>: Set up the
disassembler info in tm_print_insn_info as appropriate for the N32
ABI. Force N32 ABI to be the default if the CPU is R8000 or
R10000.
* configure.tgt (mips*-sgi-irix6*): Map to irix6.
* configure.host (mips*-sgi-irix6*): Ditto.
stopped due to a Ctrl-C as well as breakpoints.
* hppa-tdep.c (hppa_prepare_to_proceed): Add FIXME as this may not
support thread switches after Ctrl-C.
* lin-lwp.c (lin_lwp_prepare_to_proceed): Ditto.
* linux-thread.c (linuxthreads_prepare_to_proceed): Ditto.
* m3-nat.c (mach3_prepare_to_proceed): Ditto.
instead of system-specific define's like _WIN32 and __MSDOS__.
Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH instead of SLASH_P and
ROOTED_P.
(top-level): #include "filenames.h".
* solib.c (solib_open): Use IS_DIR_SEPARATOR and IS_ABSOLUTE_PATH
instead of SLASH_CHAR, ROOTED_P and SLASH_P.
(top-level): #include "filenames.h".
* defs.h (SLASH_P, SLASH_CHAR, ROOTED_P): Remove definitions.
(SLASH_STRING): Define only for _WIN32.
* completer.c: Use HAVE_DOS_BASED_FILE_SYSTEM instead of
__MSDOS_.
* cli/cli-cmds.c (cd_command): Use IS_DIR_SEPARATOR and
IS_ABSOLUTE_PATH instead of SLASH_P and ROOTED_P. Replace
system-specific ifdefs with HAVE_DOS_BASED_FILE_SYSTEM.
(top-level): #include "filenames.h".
than requiring that all per-architecture data be registered before
the first gdbarch object is allocated.
* gdbarch.sh: Changes to effect the following:
* gdbarch.c (alloc_gdbarch_data, init_gdbarch_data): Delete
declarations and definitions.
(check_gdbarch_data): New function, and declaration.
(gdbarch_alloc): Don't call alloc_gdbarch_data; leaving the fields
zero is good enough.
(free_gdbarch_data): Tolerate a null data pointer. Free only
those data items gdbarch->data actually has allocated.
(set_gdbarch_data, gdbarch_data): Call check_gdbarch_data.
(gdbarch_update_p): No need to call init_gdbarch_data.
Keith Seitz
Corinna Vinschen
H.J. Lu
Christopher Faylor
Andrew Cagney
Michael Snyder
Orjan Friberg
Don Howard
Daniel Jacobowitz
Mark Kettenis
Eli Zaretskii
Jim Blandy
Stephane Carrez
John R. Moore
Elena Zannoni
Stephen P. Smith
Nicholas Duffek
J.T. Conklin
Kevin Buettner
Michael Chastain
Andreas Jaeger
Joel Brobecker
Fernando Nasser
Per Bothner
Jonathan Larmour